diff options
Diffstat (limited to 'include/uapi/linux')
| -rw-r--r-- | include/uapi/linux/baycom.h | 40 | ||||
| -rw-r--r-- | include/uapi/linux/hdlcdrv.h | 111 | ||||
| -rw-r--r-- | include/uapi/linux/netrom.h | 37 | ||||
| -rw-r--r-- | include/uapi/linux/rose.h | 91 | ||||
| -rw-r--r-- | include/uapi/linux/scc.h | 174 |
5 files changed, 0 insertions, 453 deletions
diff --git a/include/uapi/linux/baycom.h b/include/uapi/linux/baycom.h deleted file mode 100644 index 478cb565ae52..000000000000 --- a/include/uapi/linux/baycom.h +++ /dev/null @@ -1,40 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * The Linux BAYCOM driver for the Baycom serial 1200 baud modem - * and the parallel 9600 baud modem - * (C) 1997-1998 by Thomas Sailer, HB9JNX/AE4WA - */ - -#ifndef _BAYCOM_H -#define _BAYCOM_H - -/* -------------------------------------------------------------------- */ -/* - * structs for the IOCTL commands - */ - -struct baycom_debug_data { - unsigned long debug1; - unsigned long debug2; - long debug3; -}; - -struct baycom_ioctl { - int cmd; - union { - struct baycom_debug_data dbg; - } data; -}; - -/* -------------------------------------------------------------------- */ - -/* - * ioctl values change for baycom - */ -#define BAYCOMCTL_GETDEBUG 0x92 - -/* -------------------------------------------------------------------- */ - -#endif /* _BAYCOM_H */ - -/* --------------------------------------------------------------------- */ diff --git a/include/uapi/linux/hdlcdrv.h b/include/uapi/linux/hdlcdrv.h deleted file mode 100644 index 9fe9499403a6..000000000000 --- a/include/uapi/linux/hdlcdrv.h +++ /dev/null @@ -1,111 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * hdlcdrv.h -- HDLC packet radio network driver. - * The Linux soundcard driver for 1200 baud and 9600 baud packet radio - * (C) 1996-1998 by Thomas Sailer, HB9JNX/AE4WA - */ - -#ifndef _UAPI_HDLCDRV_H -#define _UAPI_HDLCDRV_H - -/* -------------------------------------------------------------------- */ -/* - * structs for the IOCTL commands - */ - -struct hdlcdrv_params { - int iobase; - int irq; - int dma; - int dma2; - int seriobase; - int pariobase; - int midiiobase; -}; - -struct hdlcdrv_channel_params { - int tx_delay; /* the transmitter keyup delay in 10ms units */ - int tx_tail; /* the transmitter keyoff delay in 10ms units */ - int slottime; /* the slottime in 10ms; usually 10 = 100ms */ - int ppersist; /* the p-persistence 0..255 */ - int fulldup; /* some driver do not support full duplex, setting */ - /* this just makes them send even if DCD is on */ -}; - -struct hdlcdrv_old_channel_state { - int ptt; - int dcd; - int ptt_keyed; -}; - -struct hdlcdrv_channel_state { - int ptt; - int dcd; - int ptt_keyed; - unsigned long tx_packets; - unsigned long tx_errors; - unsigned long rx_packets; - unsigned long rx_errors; -}; - -struct hdlcdrv_ioctl { - int cmd; - union { - struct hdlcdrv_params mp; - struct hdlcdrv_channel_params cp; - struct hdlcdrv_channel_state cs; - struct hdlcdrv_old_channel_state ocs; - unsigned int calibrate; - unsigned char bits; - char modename[128]; - char drivername[32]; - } data; -}; - -/* -------------------------------------------------------------------- */ - -/* - * ioctl values - */ -#define HDLCDRVCTL_GETMODEMPAR 0 -#define HDLCDRVCTL_SETMODEMPAR 1 -#define HDLCDRVCTL_MODEMPARMASK 2 /* not handled by hdlcdrv */ -#define HDLCDRVCTL_GETCHANNELPAR 10 -#define HDLCDRVCTL_SETCHANNELPAR 11 -#define HDLCDRVCTL_OLDGETSTAT 20 -#define HDLCDRVCTL_CALIBRATE 21 -#define HDLCDRVCTL_GETSTAT 22 - -/* - * these are mainly for debugging purposes - */ -#define HDLCDRVCTL_GETSAMPLES 30 -#define HDLCDRVCTL_GETBITS 31 - -/* - * not handled by hdlcdrv, but by its depending drivers - */ -#define HDLCDRVCTL_GETMODE 40 -#define HDLCDRVCTL_SETMODE 41 -#define HDLCDRVCTL_MODELIST 42 -#define HDLCDRVCTL_DRIVERNAME 43 - -/* - * mask of needed modem parameters, returned by HDLCDRVCTL_MODEMPARMASK - */ -#define HDLCDRV_PARMASK_IOBASE (1<<0) -#define HDLCDRV_PARMASK_IRQ (1<<1) -#define HDLCDRV_PARMASK_DMA (1<<2) -#define HDLCDRV_PARMASK_DMA2 (1<<3) -#define HDLCDRV_PARMASK_SERIOBASE (1<<4) -#define HDLCDRV_PARMASK_PARIOBASE (1<<5) -#define HDLCDRV_PARMASK_MIDIIOBASE (1<<6) - -/* -------------------------------------------------------------------- */ - - -/* -------------------------------------------------------------------- */ - -#endif /* _UAPI_HDLCDRV_H */ - -/* -------------------------------------------------------------------- */ diff --git a/include/uapi/linux/netrom.h b/include/uapi/linux/netrom.h deleted file mode 100644 index 7498ea3c3940..000000000000 --- a/include/uapi/linux/netrom.h +++ /dev/null @@ -1,37 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * These are the public elements of the Linux kernel NET/ROM implementation. - * For kernel AX.25 see the file ax25.h. This file requires ax25.h for the - * definition of the ax25_address structure. - */ - -#ifndef NETROM_KERNEL_H -#define NETROM_KERNEL_H - -#include <linux/ax25.h> - -#define NETROM_MTU 236 - -#define NETROM_T1 1 -#define NETROM_T2 2 -#define NETROM_N2 3 -#define NETROM_T4 6 -#define NETROM_IDLE 7 - -#define SIOCNRDECOBS (SIOCPROTOPRIVATE+2) - -struct nr_route_struct { -#define NETROM_NEIGH 0 -#define NETROM_NODE 1 - int type; - ax25_address callsign; - char device[16]; - unsigned int quality; - char mnemonic[7]; - ax25_address neighbour; - unsigned int obs_count; - unsigned int ndigis; - ax25_address digipeaters[AX25_MAX_DIGIS]; -}; - -#endif diff --git a/include/uapi/linux/rose.h b/include/uapi/linux/rose.h deleted file mode 100644 index 19aa4693c8fc..000000000000 --- a/include/uapi/linux/rose.h +++ /dev/null @@ -1,91 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * These are the public elements of the Linux kernel Rose implementation. - * For kernel AX.25 see the file ax25.h. This file requires ax25.h for the - * definition of the ax25_address structure. - */ - -#ifndef ROSE_KERNEL_H -#define ROSE_KERNEL_H - -#include <linux/socket.h> -#include <linux/ax25.h> - -#define ROSE_MTU 251 - -#define ROSE_MAX_DIGIS 6 - -#define ROSE_DEFER 1 -#define ROSE_T1 2 -#define ROSE_T2 3 -#define ROSE_T3 4 -#define ROSE_IDLE 5 -#define ROSE_QBITINCL 6 -#define ROSE_HOLDBACK 7 - -#define SIOCRSGCAUSE (SIOCPROTOPRIVATE+0) -#define SIOCRSSCAUSE (SIOCPROTOPRIVATE+1) -#define SIOCRSL2CALL (SIOCPROTOPRIVATE+2) -#define SIOCRSSL2CALL (SIOCPROTOPRIVATE+2) -#define SIOCRSACCEPT (SIOCPROTOPRIVATE+3) -#define SIOCRSCLRRT (SIOCPROTOPRIVATE+4) -#define SIOCRSGL2CALL (SIOCPROTOPRIVATE+5) -#define SIOCRSGFACILITIES (SIOCPROTOPRIVATE+6) - -#define ROSE_DTE_ORIGINATED 0x00 -#define ROSE_NUMBER_BUSY 0x01 -#define ROSE_INVALID_FACILITY 0x03 -#define ROSE_NETWORK_CONGESTION 0x05 -#define ROSE_OUT_OF_ORDER 0x09 -#define ROSE_ACCESS_BARRED 0x0B -#define ROSE_NOT_OBTAINABLE 0x0D -#define ROSE_REMOTE_PROCEDURE 0x11 -#define ROSE_LOCAL_PROCEDURE 0x13 -#define ROSE_SHIP_ABSENT 0x39 - -typedef struct { - char rose_addr[5]; -} rose_address; - -struct sockaddr_rose { - __kernel_sa_family_t srose_family; - rose_address srose_addr; - ax25_address srose_call; - int srose_ndigis; - ax25_address srose_digi; -}; - -struct full_sockaddr_rose { - __kernel_sa_family_t srose_family; - rose_address srose_addr; - ax25_address srose_call; - unsigned int srose_ndigis; - ax25_address srose_digis[ROSE_MAX_DIGIS]; -}; - -struct rose_route_struct { - rose_address address; - unsigned short mask; - ax25_address neighbour; - char device[16]; - unsigned char ndigis; - ax25_address digipeaters[AX25_MAX_DIGIS]; -}; - -struct rose_cause_struct { - unsigned char cause; - unsigned char diagnostic; -}; - -struct rose_facilities_struct { - rose_address source_addr, dest_addr; - ax25_address source_call, dest_call; - unsigned char source_ndigis, dest_ndigis; - ax25_address source_digis[ROSE_MAX_DIGIS]; - ax25_address dest_digis[ROSE_MAX_DIGIS]; - unsigned int rand; - rose_address fail_addr; - ax25_address fail_call; -}; - -#endif diff --git a/include/uapi/linux/scc.h b/include/uapi/linux/scc.h deleted file mode 100644 index 947edb17ce9d..000000000000 --- a/include/uapi/linux/scc.h +++ /dev/null @@ -1,174 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */ - -#ifndef _UAPI_SCC_H -#define _UAPI_SCC_H - -#include <linux/sockios.h> - -/* selection of hardware types */ - -#define PA0HZP 0x00 /* hardware type for PA0HZP SCC card and compatible */ -#define EAGLE 0x01 /* hardware type for EAGLE card */ -#define PC100 0x02 /* hardware type for PC100 card */ -#define PRIMUS 0x04 /* hardware type for PRIMUS-PC (DG9BL) card */ -#define DRSI 0x08 /* hardware type for DRSI PC*Packet card */ -#define BAYCOM 0x10 /* hardware type for BayCom (U)SCC */ - -/* DEV ioctl() commands */ - -enum SCC_ioctl_cmds { - SIOCSCCRESERVED = SIOCDEVPRIVATE, - SIOCSCCCFG, - SIOCSCCINI, - SIOCSCCCHANINI, - SIOCSCCSMEM, - SIOCSCCGKISS, - SIOCSCCSKISS, - SIOCSCCGSTAT, - SIOCSCCCAL -}; - -/* Device parameter control (from WAMPES) */ - -enum L1_params { - PARAM_DATA, - PARAM_TXDELAY, - PARAM_PERSIST, - PARAM_SLOTTIME, - PARAM_TXTAIL, - PARAM_FULLDUP, - PARAM_SOFTDCD, /* was: PARAM_HW */ - PARAM_MUTE, /* ??? */ - PARAM_DTR, - PARAM_RTS, - PARAM_SPEED, - PARAM_ENDDELAY, /* ??? */ - PARAM_GROUP, - PARAM_IDLE, - PARAM_MIN, - PARAM_MAXKEY, - PARAM_WAIT, - PARAM_MAXDEFER, - PARAM_TX, - PARAM_HWEVENT = 31, - PARAM_RETURN = 255 /* reset kiss mode */ -}; - -/* fulldup parameter */ - -enum FULLDUP_modes { - KISS_DUPLEX_HALF, /* normal CSMA operation */ - KISS_DUPLEX_FULL, /* fullduplex, key down trx after transmission */ - KISS_DUPLEX_LINK, /* fullduplex, key down trx after 'idletime' sec */ - KISS_DUPLEX_OPTIMA /* fullduplex, let the protocol layer control the hw */ -}; - -/* misc. parameters */ - -#define TIMER_OFF 65535U /* to switch off timers */ -#define NO_SUCH_PARAM 65534U /* param not implemented */ - -/* HWEVENT parameter */ - -enum HWEVENT_opts { - HWEV_DCD_ON, - HWEV_DCD_OFF, - HWEV_ALL_SENT -}; - -/* channel grouping */ - -#define RXGROUP 0100 /* if set, only tx when all channels clear */ -#define TXGROUP 0200 /* if set, don't transmit simultaneously */ - -/* Tx/Rx clock sources */ - -enum CLOCK_sources { - CLK_DPLL, /* normal halfduplex operation */ - CLK_EXTERNAL, /* external clocking (G3RUH/DF9IC modems) */ - CLK_DIVIDER, /* Rx = DPLL, Tx = divider (fullduplex with */ - /* modems without clock regeneration */ - CLK_BRG /* experimental fullduplex mode with DPLL/BRG for */ - /* MODEMs without clock recovery */ -}; - -/* Tx state */ - -enum TX_state { - TXS_IDLE, /* Transmitter off, no data pending */ - TXS_BUSY, /* waiting for permission to send / tailtime */ - TXS_ACTIVE, /* Transmitter on, sending data */ - TXS_NEWFRAME, /* reset CRC and send (next) frame */ - TXS_IDLE2, /* Transmitter on, no data pending */ - TXS_WAIT, /* Waiting for Mintime to expire */ - TXS_TIMEOUT /* We had a transmission timeout */ -}; - -typedef unsigned long io_port; /* type definition for an 'io port address' */ - -/* SCC statistical information */ - -struct scc_stat { - long rxints; /* Receiver interrupts */ - long txints; /* Transmitter interrupts */ - long exints; /* External/status interrupts */ - long spints; /* Special receiver interrupts */ - - long txframes; /* Packets sent */ - long rxframes; /* Number of Frames Actually Received */ - long rxerrs; /* CRC Errors */ - long txerrs; /* KISS errors */ - - unsigned int nospace; /* "Out of buffers" */ - unsigned int rx_over; /* Receiver Overruns */ - unsigned int tx_under; /* Transmitter Underruns */ - - unsigned int tx_state; /* Transmitter state */ - int tx_queued; /* tx frames enqueued */ - - unsigned int maxqueue; /* allocated tx_buffers */ - unsigned int bufsize; /* used buffersize */ -}; - -struct scc_modem { - long speed; /* Line speed, bps */ - char clocksrc; /* 0 = DPLL, 1 = external, 2 = divider */ - char nrz; /* NRZ instead of NRZI */ -}; - -struct scc_kiss_cmd { - int command; /* one of the KISS-Commands defined above */ - unsigned param; /* KISS-Param */ -}; - -struct scc_hw_config { - io_port data_a; /* data port channel A */ - io_port ctrl_a; /* control port channel A */ - io_port data_b; /* data port channel B */ - io_port ctrl_b; /* control port channel B */ - io_port vector_latch; /* INTACK-Latch (#) */ - io_port special; /* special function port */ - - int irq; /* irq */ - long clock; /* clock */ - char option; /* command for function port */ - - char brand; /* hardware type */ - char escc; /* use ext. features of a 8580/85180/85280 */ -}; - -/* (#) only one INTACK latch allowed. */ - - -struct scc_mem_config { - unsigned int dummy; - unsigned int bufsize; -}; - -struct scc_calibrate { - unsigned int time; - unsigned char pattern; -}; - -#endif /* _UAPI_SCC_H */ |