diff options
Diffstat (limited to 'include/uapi/linux/nl80211.h')
| -rw-r--r-- | include/uapi/linux/nl80211.h | 139 |
1 files changed, 109 insertions, 30 deletions
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index f6c1b181c886..d1a14f2892d9 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -11,7 +11,7 @@ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> * Copyright 2008 Colin McCabe <colin@cozybit.com> * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2024 Intel Corporation + * Copyright (C) 2018-2025 Intel Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -1330,7 +1330,15 @@ * TID to Link mapping for downlink/uplink traffic. * * @NL80211_CMD_ASSOC_MLO_RECONF: For a non-AP MLD station, request to - * add/remove links to/from the association. + * add/remove links to/from the association. To indicate link + * reconfiguration request results from the driver, this command is also + * used as an event to notify userspace about the added links information. + * For notifying the removed links information, the existing + * %NL80211_CMD_LINKS_REMOVED command is used. This command is also used to + * notify userspace about newly added links for the current connection in + * case of AP-initiated link recommendation requests, received via + * a BTM (BSS Transition Management) request or a link reconfig notify + * frame, where the driver handles the link recommendation offload. * * @NL80211_CMD_EPCS_CFG: EPCS configuration for a station. Used by userland to * control EPCS configuration. Used to notify userland on the current state @@ -2881,9 +2889,9 @@ enum nl80211_commands { * @NL80211_ATTR_VIF_RADIO_MASK: Bitmask of allowed radios (u32). * A value of 0 means all radios. * - * @NL80211_ATTR_SUPPORTED_SELECTORS: supported selectors, array of - * supported selectors as defined by IEEE 802.11 7.3.2.2 but without the - * length restriction (at most %NL80211_MAX_SUPP_SELECTORS). + * @NL80211_ATTR_SUPPORTED_SELECTORS: supported BSS Membership Selectors, array + * of supported selectors as defined by IEEE Std 802.11-2020 9.4.2.3 but + * without the length restriction (at most %NL80211_MAX_SUPP_SELECTORS). * This can be used to provide a list of selectors that are implemented * by the supplicant. If not given, support for SAE_H2E is assumed. * @@ -2893,6 +2901,33 @@ enum nl80211_commands { * @NL80211_ATTR_EPCS: Flag attribute indicating that EPCS is enabled for a * station interface. * + * @NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS: Extended MLD capabilities and + * operations that userspace implements to use during association/ML + * link reconfig, currently only "BTM MLD Recommendation For Multiple + * APs Support". Drivers may set additional flags that they support + * in the kernel or device. + * + * @NL80211_ATTR_WIPHY_RADIO_INDEX: (int) Integer attribute denoting the index + * of the radio in interest. Internally a value of -1 is used to + * indicate that the radio id is not given in user-space. This means + * that all the attributes are applicable to all the radios. If there is + * a radio index provided in user-space, the attributes will be + * applicable to that specific radio only. If the radio id is greater + * thank the number of radios, error denoting invalid value is returned. + * + * @NL80211_ATTR_S1G_LONG_BEACON_PERIOD: (u8) Integer attribute that represents + * the number of beacon intervals between each long beacon transmission + * for an S1G BSS with short beaconing enabled. This is a required + * attribute for initialising an S1G short beaconing BSS. When updating + * the short beacon data, this is not required. It has a minimum value of + * 2 (i.e 2 beacon intervals). + * + * @NL80211_ATTR_S1G_SHORT_BEACON: Nested attribute containing the short beacon + * head and tail used to set or update the short beacon templates. When + * bringing up a new interface, %NL80211_ATTR_S1G_LONG_BEACON_PERIOD is + * required alongside this attribute. Refer to + * @enum nl80211_s1g_short_beacon_attrs for the attribute definitions. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3448,6 +3483,13 @@ enum nl80211_attrs { NL80211_ATTR_MLO_RECONF_REM_LINKS, NL80211_ATTR_EPCS, + NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS, + + NL80211_ATTR_WIPHY_RADIO_INDEX, + + NL80211_ATTR_S1G_LONG_BEACON_PERIOD, + NL80211_ATTR_S1G_SHORT_BEACON, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -4327,6 +4369,8 @@ enum nl80211_wmm_rule { * otherwise completely disabled. * @NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP: This channel can be used for a * very low power (VLP) AP, despite being NO_IR. + * @NL80211_FREQUENCY_ATTR_ALLOW_20MHZ_ACTIVITY: This channel can be active in + * 20 MHz bandwidth, despite being NO_IR. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -4371,6 +4415,7 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT, NL80211_FREQUENCY_ATTR_CAN_MONITOR, NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP, + NL80211_FREQUENCY_ATTR_ALLOW_20MHZ_ACTIVITY, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -4582,31 +4627,34 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed * @NL80211_RRF_ALLOW_6GHZ_VLP_AP: Very low power (VLP) AP can be permitted * despite NO_IR configuration. + * @NL80211_RRF_ALLOW_20MHZ_ACTIVITY: Allow activity in 20 MHz bandwidth, + * despite NO_IR configuration. */ enum nl80211_reg_rule_flags { - NL80211_RRF_NO_OFDM = 1<<0, - NL80211_RRF_NO_CCK = 1<<1, - NL80211_RRF_NO_INDOOR = 1<<2, - NL80211_RRF_NO_OUTDOOR = 1<<3, - NL80211_RRF_DFS = 1<<4, - NL80211_RRF_PTP_ONLY = 1<<5, - NL80211_RRF_PTMP_ONLY = 1<<6, - NL80211_RRF_NO_IR = 1<<7, - __NL80211_RRF_NO_IBSS = 1<<8, - NL80211_RRF_AUTO_BW = 1<<11, - NL80211_RRF_IR_CONCURRENT = 1<<12, - NL80211_RRF_NO_HT40MINUS = 1<<13, - NL80211_RRF_NO_HT40PLUS = 1<<14, - NL80211_RRF_NO_80MHZ = 1<<15, - NL80211_RRF_NO_160MHZ = 1<<16, - NL80211_RRF_NO_HE = 1<<17, - NL80211_RRF_NO_320MHZ = 1<<18, - NL80211_RRF_NO_EHT = 1<<19, - NL80211_RRF_PSD = 1<<20, - NL80211_RRF_DFS_CONCURRENT = 1<<21, - NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1<<22, - NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1<<23, - NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1<<24, + NL80211_RRF_NO_OFDM = 1 << 0, + NL80211_RRF_NO_CCK = 1 << 1, + NL80211_RRF_NO_INDOOR = 1 << 2, + NL80211_RRF_NO_OUTDOOR = 1 << 3, + NL80211_RRF_DFS = 1 << 4, + NL80211_RRF_PTP_ONLY = 1 << 5, + NL80211_RRF_PTMP_ONLY = 1 << 6, + NL80211_RRF_NO_IR = 1 << 7, + __NL80211_RRF_NO_IBSS = 1 << 8, + NL80211_RRF_AUTO_BW = 1 << 11, + NL80211_RRF_IR_CONCURRENT = 1 << 12, + NL80211_RRF_NO_HT40MINUS = 1 << 13, + NL80211_RRF_NO_HT40PLUS = 1 << 14, + NL80211_RRF_NO_80MHZ = 1 << 15, + NL80211_RRF_NO_160MHZ = 1 << 16, + NL80211_RRF_NO_HE = 1 << 17, + NL80211_RRF_NO_320MHZ = 1 << 18, + NL80211_RRF_NO_EHT = 1 << 19, + NL80211_RRF_PSD = 1 << 20, + NL80211_RRF_DFS_CONCURRENT = 1 << 21, + NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1 << 22, + NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1 << 23, + NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1 << 24, + NL80211_RRF_ALLOW_20MHZ_ACTIVITY = 1 << 25, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR @@ -4727,8 +4775,8 @@ enum nl80211_survey_info { * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP * @NL80211_MNTR_FLAG_CONTROL: pass control frames * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering - * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. - * overrides all other flags. + * @NL80211_MNTR_FLAG_COOK_FRAMES: deprecated + * will unconditionally be refused * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address * and ACK incoming unicast packets. * @NL80211_MNTR_FLAG_SKIP_TX: do not pass local tx packets @@ -8022,6 +8070,11 @@ enum nl80211_sar_specs_attrs { * Setting this flag is permitted only if the driver advertises EMA support * by setting wiphy->ema_max_profile_periodicity to non-zero. * + * @NL80211_MBSSID_CONFIG_ATTR_TX_LINK_ID: Link ID of the transmitted profile. + * This parameter is mandatory when NL80211_ATTR_MBSSID_CONFIG attributes + * are sent for a non-transmitted profile and if the transmitted profile + * is part of an MLD. For all other cases this parameter is unnecessary. + * * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute */ @@ -8033,6 +8086,7 @@ enum nl80211_mbssid_config_attributes { NL80211_MBSSID_CONFIG_ATTR_INDEX, NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX, NL80211_MBSSID_CONFIG_ATTR_EMA, + NL80211_MBSSID_CONFIG_ATTR_TX_LINK_ID, /* keep last */ __NL80211_MBSSID_CONFIG_ATTR_LAST, @@ -8068,6 +8122,7 @@ enum nl80211_ap_settings_flags { * and contains attributes defined in &enum nl80211_if_combination_attrs. * @NL80211_WIPHY_RADIO_ATTR_ANTENNA_MASK: bitmask (u32) of antennas * connected to this radio. + * @NL80211_WIPHY_RADIO_ATTR_RTS_THRESHOLD: RTS threshold (u32) of this radio. * * @__NL80211_WIPHY_RADIO_ATTR_LAST: Internal * @NL80211_WIPHY_RADIO_ATTR_MAX: Highest attribute @@ -8079,6 +8134,7 @@ enum nl80211_wiphy_radio_attrs { NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE, NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION, NL80211_WIPHY_RADIO_ATTR_ANTENNA_MASK, + NL80211_WIPHY_RADIO_ATTR_RTS_THRESHOLD, /* keep last */ __NL80211_WIPHY_RADIO_ATTR_LAST, @@ -8108,4 +8164,27 @@ enum nl80211_wiphy_radio_freq_range { NL80211_WIPHY_RADIO_FREQ_ATTR_MAX = __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST - 1, }; +/** + * enum nl80211_s1g_short_beacon_attrs - S1G short beacon data + * + * @__NL80211_S1G_SHORT_BEACON_ATTR_INVALID: Invalid + * + * @NL80211_S1G_SHORT_BEACON_ATTR_HEAD: Short beacon head (binary). + * @NL80211_S1G_SHORT_BEACON_ATTR_TAIL: Short beacon tail (binary). + * + * @__NL80211_S1G_SHORT_BEACON_ATTR_LAST: Internal + * @NL80211_S1G_SHORT_BEACON_ATTR_MAX: Highest attribute + */ +enum nl80211_s1g_short_beacon_attrs { + __NL80211_S1G_SHORT_BEACON_ATTR_INVALID, + + NL80211_S1G_SHORT_BEACON_ATTR_HEAD, + NL80211_S1G_SHORT_BEACON_ATTR_TAIL, + + /* keep last */ + __NL80211_S1G_SHORT_BEACON_ATTR_LAST, + NL80211_S1G_SHORT_BEACON_ATTR_MAX = + __NL80211_S1G_SHORT_BEACON_ATTR_LAST - 1 +}; + #endif /* __LINUX_NL80211_H */ |