summaryrefslogtreecommitdiff
path: root/include/net/mac80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/net/mac80211.h')
-rw-r--r--include/net/mac80211.h163
1 files changed, 141 insertions, 22 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index d400fe2e8668..353488ab94a2 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -7,7 +7,7 @@
* Copyright 2007-2010 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright (C) 2015 - 2017 Intel Deutschland GmbH
- * Copyright (C) 2018 - 2023 Intel Corporation
+ * Copyright (C) 2018 - 2024 Intel Corporation
*/
#ifndef MAC80211_H
@@ -214,6 +214,10 @@ struct ieee80211_low_level_stats {
* @IEEE80211_CHANCTX_CHANGE_CHANNEL: switched to another operating channel,
* this is used only with channel switching with CSA
* @IEEE80211_CHANCTX_CHANGE_MIN_WIDTH: The min required channel width changed
+ * @IEEE80211_CHANCTX_CHANGE_AP: The AP channel definition changed, so (wider
+ * bandwidth) OFDMA settings need to be changed
+ * @IEEE80211_CHANCTX_CHANGE_PUNCTURING: The punctured channel(s) bitmap
+ * was changed.
*/
enum ieee80211_chanctx_change {
IEEE80211_CHANCTX_CHANGE_WIDTH = BIT(0),
@@ -221,6 +225,19 @@ enum ieee80211_chanctx_change {
IEEE80211_CHANCTX_CHANGE_RADAR = BIT(2),
IEEE80211_CHANCTX_CHANGE_CHANNEL = BIT(3),
IEEE80211_CHANCTX_CHANGE_MIN_WIDTH = BIT(4),
+ IEEE80211_CHANCTX_CHANGE_AP = BIT(5),
+ IEEE80211_CHANCTX_CHANGE_PUNCTURING = BIT(6),
+};
+
+/**
+ * struct ieee80211_chan_req - A channel "request"
+ * @oper: channel definition to use for operation
+ * @ap: the channel definition of the AP, if any
+ * (otherwise the chan member is %NULL)
+ */
+struct ieee80211_chan_req {
+ struct cfg80211_chan_def oper;
+ struct cfg80211_chan_def ap;
};
/**
@@ -231,6 +248,8 @@ enum ieee80211_chanctx_change {
*
* @def: the channel definition
* @min_def: the minimum channel definition currently required.
+ * @ap: the channel definition the AP actually is operating as,
+ * for use with (wider bandwidth) OFDMA
* @rx_chains_static: The number of RX chains that must always be
* active on the channel to receive MIMO transmissions
* @rx_chains_dynamic: The number of RX chains that must be enabled
@@ -243,6 +262,7 @@ enum ieee80211_chanctx_change {
struct ieee80211_chanctx_conf {
struct cfg80211_chan_def def;
struct cfg80211_chan_def min_def;
+ struct cfg80211_chan_def ap;
u8 rx_chains_static, rx_chains_dynamic;
@@ -340,8 +360,8 @@ struct ieee80211_vif_chanctx_switch {
* @BSS_CHANGED_FILS_DISCOVERY: FILS discovery status changed.
* @BSS_CHANGED_UNSOL_BCAST_PROBE_RESP: Unsolicited broadcast probe response
* status changed.
- * @BSS_CHANGED_EHT_PUNCTURING: The channel puncturing bitmap changed.
* @BSS_CHANGED_MLD_VALID_LINKS: MLD valid links status changed.
+ * @BSS_CHANGED_MLD_TTLM: TID to link mapping was changed
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
@@ -376,8 +396,8 @@ enum ieee80211_bss_change {
BSS_CHANGED_HE_BSS_COLOR = 1<<29,
BSS_CHANGED_FILS_DISCOVERY = 1<<30,
BSS_CHANGED_UNSOL_BCAST_PROBE_RESP = 1<<31,
- BSS_CHANGED_EHT_PUNCTURING = BIT_ULL(32),
BSS_CHANGED_MLD_VALID_LINKS = BIT_ULL(33),
+ BSS_CHANGED_MLD_TTLM = BIT_ULL(34),
/* when adding here, make sure to change ieee80211_reconfig */
};
@@ -537,6 +557,10 @@ struct ieee80211_fils_discovery {
* to that BSS) that can change during the lifetime of the BSS.
*
* @vif: reference to owning VIF
+ * @bss: the cfg80211 bss descriptor. Valid only for a station, and only
+ * when associated. Note: This contains information which is not
+ * necessarily authenticated. For example, information coming from probe
+ * responses.
* @addr: (link) address used locally
* @link_id: link ID, or 0 for non-MLO
* @htc_trig_based_pkt_ext: default PE in 4us units, if BSS supports HE
@@ -581,7 +605,7 @@ struct ieee80211_fils_discovery {
* @mcast_rate: per-band multicast rate index + 1 (0: disabled)
* @bssid: The BSSID for this BSS
* @enable_beacon: whether beaconing should be enabled or not
- * @chandef: Channel definition for this BSS -- the hardware might be
+ * @chanreq: Channel request for this BSS -- the hardware might be
* configured a higher bandwidth than this BSS uses, for example.
* @mu_group: VHT MU-MIMO group membership data
* @ht_operation_mode: HT operation mode like in &struct ieee80211_ht_operation.
@@ -642,9 +666,7 @@ struct ieee80211_fils_discovery {
* @tx_pwr_env_num: number of @tx_pwr_env.
* @pwr_reduction: power constraint of BSS.
* @eht_support: does this BSS support EHT
- * @eht_puncturing: bitmap to indicate which channels are punctured in this BSS
* @csa_active: marks whether a channel switch is going on.
- * @csa_punct_bitmap: new puncturing bitmap for channel switch
* @mu_mimo_owner: indicates interface owns MU-MIMO capability
* @chanctx_conf: The channel context this interface is assigned to, or %NULL
* when it is not assigned. This pointer is RCU-protected due to the TX
@@ -682,6 +704,7 @@ struct ieee80211_fils_discovery {
*/
struct ieee80211_bss_conf {
struct ieee80211_vif *vif;
+ struct cfg80211_bss *bss;
const u8 *bssid;
unsigned int link_id;
@@ -714,7 +737,7 @@ struct ieee80211_bss_conf {
u32 cqm_rssi_hyst;
s32 cqm_rssi_low;
s32 cqm_rssi_high;
- struct cfg80211_chan_def chandef;
+ struct ieee80211_chan_req chanreq;
struct ieee80211_mu_group_data mu_group;
bool qos;
bool hidden_ssid;
@@ -747,10 +770,8 @@ struct ieee80211_bss_conf {
u8 tx_pwr_env_num;
u8 pwr_reduction;
bool eht_support;
- u16 eht_puncturing;
bool csa_active;
- u16 csa_punct_bitmap;
bool mu_mimo_owner;
struct ieee80211_chanctx_conf __rcu *chanctx_conf;
@@ -1742,8 +1763,9 @@ struct ieee80211_conf {
* @chandef: the new channel to switch to
* @count: the number of TBTT's until the channel switch event
* @delay: maximum delay between the time the AP transmitted the last beacon in
- * current channel and the expected time of the first beacon in the new
- * channel, expressed in TU.
+ * current channel and the expected time of the first beacon in the new
+ * channel, expressed in TU.
+ * @link_id: the link ID of the link doing the channel switch, 0 for non-MLO
*/
struct ieee80211_channel_switch {
u64 timestamp;
@@ -1751,6 +1773,7 @@ struct ieee80211_channel_switch {
bool block_tx;
struct cfg80211_chan_def chandef;
u8 count;
+ u8 link_id;
u32 delay;
};
@@ -1772,6 +1795,10 @@ struct ieee80211_channel_switch {
* this is not pure P2P vif.
* @IEEE80211_VIF_EML_ACTIVE: The driver indicates that EML operation is
* enabled for the interface.
+ * @IEEE80211_VIF_IGNORE_OFDMA_WIDER_BW: Ignore wider bandwidth OFDMA
+ * operation on this interface and request a channel context without
+ * the AP definition. Use this e.g. because the device is able to
+ * handle OFDMA (downlink and trigger for uplink) on a per-AP basis.
*/
enum ieee80211_vif_flags {
IEEE80211_VIF_BEACON_FILTER = BIT(0),
@@ -1779,6 +1806,7 @@ enum ieee80211_vif_flags {
IEEE80211_VIF_SUPPORTS_UAPSD = BIT(2),
IEEE80211_VIF_GET_NOA_UPDATE = BIT(3),
IEEE80211_VIF_EML_ACTIVE = BIT(4),
+ IEEE80211_VIF_IGNORE_OFDMA_WIDER_BW = BIT(5),
};
@@ -1808,9 +1836,11 @@ enum ieee80211_offload_flags {
* @ps: power-save mode (STA only). This flag is NOT affected by
* offchannel/dynamic_ps operations.
* @aid: association ID number, valid only when @assoc is true
- * @eml_cap: EML capabilities as described in P802.11be_D2.2 Figure 9-1002k.
+ * @eml_cap: EML capabilities as described in P802.11be_D4.1 Figure 9-1001j.
* @eml_med_sync_delay: Medium Synchronization delay as described in
- * P802.11be_D2.2 Figure 9-1002j.
+ * P802.11be_D4.1 Figure 9-1001i.
+ * @mld_capa_op: MLD Capabilities and Operations per P802.11be_D4.1
+ * Figure 9-1001k
* @arp_addr_list: List of IPv4 addresses for hardware ARP filtering. The
* may filter ARP queries targeted for other addresses than listed here.
* The driver must allow ARP queries targeted for all address listed here
@@ -1835,6 +1865,7 @@ struct ieee80211_vif_cfg {
u16 aid;
u16 eml_cap;
u16 eml_med_sync_delay;
+ u16 mld_capa_op;
__be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
int arp_addr_cnt;
@@ -1845,6 +1876,35 @@ struct ieee80211_vif_cfg {
u8 ap_addr[ETH_ALEN] __aligned(2);
};
+#define IEEE80211_TTLM_NUM_TIDS 8
+
+/**
+ * struct ieee80211_neg_ttlm - negotiated TID to link map info
+ *
+ * @downlink: bitmap of active links per TID for downlink, or 0 if mapping for
+ * this TID is not included.
+ * @uplink: bitmap of active links per TID for uplink, or 0 if mapping for this
+ * TID is not included.
+ * @valid: info is valid or not.
+ */
+struct ieee80211_neg_ttlm {
+ u16 downlink[IEEE80211_TTLM_NUM_TIDS];
+ u16 uplink[IEEE80211_TTLM_NUM_TIDS];
+ bool valid;
+};
+
+/**
+ * enum ieee80211_neg_ttlm_res - return value for negotiated TTLM handling
+ * @NEG_TTLM_RES_ACCEPT: accept the request
+ * @NEG_TTLM_RES_REJECT: reject the request
+ * @NEG_TTLM_RES_SUGGEST_PREFERRED: reject and suggest a new mapping
+ */
+enum ieee80211_neg_ttlm_res {
+ NEG_TTLM_RES_ACCEPT,
+ NEG_TTLM_RES_REJECT,
+ NEG_TTLM_RES_SUGGEST_PREFERRED
+};
+
/**
* struct ieee80211_vif - per-interface data
*
@@ -1863,6 +1923,11 @@ struct ieee80211_vif_cfg {
* API calls meant for that purpose.
* @dormant_links: bitmap of valid but disabled links, or 0 for non-MLO.
* Must be a subset of valid_links.
+ * @suspended_links: subset of dormant_links representing links that are
+ * suspended.
+ * 0 for non-MLO.
+ * @neg_ttlm: negotiated TID to link mapping info.
+ * see &struct ieee80211_neg_ttlm.
* @addr: address of this interface
* @p2p: indicates whether this AP or STA interface is a p2p
* interface, i.e. a GO or p2p-sta respectively
@@ -1900,7 +1965,8 @@ struct ieee80211_vif {
struct ieee80211_vif_cfg cfg;
struct ieee80211_bss_conf bss_conf;
struct ieee80211_bss_conf __rcu *link_conf[IEEE80211_MLD_MAX_NUM_LINKS];
- u16 valid_links, active_links, dormant_links;
+ u16 valid_links, active_links, dormant_links, suspended_links;
+ struct ieee80211_neg_ttlm neg_ttlm;
u8 addr[ETH_ALEN] __aligned(2);
bool p2p;
@@ -1947,6 +2013,21 @@ static inline bool ieee80211_vif_is_mld(const struct ieee80211_vif *vif)
return vif->valid_links != 0;
}
+/**
+ * ieee80211_vif_link_active - check if a given link is active
+ * @vif: the vif
+ * @link_id: the link ID to check
+ * Return: %true if the vif is an MLD and the link is active, or if
+ * the vif is not an MLD and the link ID is 0; %false otherwise.
+ */
+static inline bool ieee80211_vif_link_active(const struct ieee80211_vif *vif,
+ unsigned int link_id)
+{
+ if (!ieee80211_vif_is_mld(vif))
+ return link_id == 0;
+ return vif->active_links & BIT(link_id);
+}
+
#define for_each_vif_active_link(vif, link, link_id) \
for (link_id = 0; link_id < ARRAY_SIZE((vif)->link_conf); link_id++) \
if ((!(vif)->active_links || \
@@ -2041,6 +2122,8 @@ static inline bool lockdep_vif_wiphy_mutex_held(struct ieee80211_vif *vif)
* @IEEE80211_KEY_FLAG_GENERATE_MMIE: This flag should be set by the driver
* for a AES_CMAC key to indicate that it requires sequence number
* generation only
+ * @IEEE80211_KEY_FLAG_SPP_AMSDU: SPP A-MSDUs can be used with this key
+ * (set by mac80211 from the sta->spp_amsdu flag)
*/
enum ieee80211_key_flags {
IEEE80211_KEY_FLAG_GENERATE_IV_MGMT = BIT(0),
@@ -2054,6 +2137,7 @@ enum ieee80211_key_flags {
IEEE80211_KEY_FLAG_PUT_MIC_SPACE = BIT(8),
IEEE80211_KEY_FLAG_NO_AUTO_TX = BIT(9),
IEEE80211_KEY_FLAG_GENERATE_MMIE = BIT(10),
+ IEEE80211_KEY_FLAG_SPP_AMSDU = BIT(11),
};
/**
@@ -2352,6 +2436,7 @@ struct ieee80211_link_sta {
* would be assigned to link[link_id] where link_id is the id assigned
* by the AP.
* @valid_links: bitmap of valid links, or 0 for non-MLO
+ * @spp_amsdu: indicates whether the STA uses SPP A-MSDU or not.
*/
struct ieee80211_sta {
u8 addr[ETH_ALEN];
@@ -2365,6 +2450,7 @@ struct ieee80211_sta {
bool tdls_initiator;
bool mfp;
bool mlo;
+ bool spp_amsdu;
u8 max_amsdu_subframes;
struct ieee80211_sta_aggregates *cur;
@@ -2692,6 +2778,11 @@ struct ieee80211_txq {
* @IEEE80211_HW_DISALLOW_PUNCTURING: HW requires disabling puncturing in EHT
* and connecting with a lower bandwidth instead
*
+ * @IEEE80211_HW_HANDLES_QUIET_CSA: HW/driver handles quieting for CSA, so
+ * no need to stop queues. This really should be set by a driver that
+ * implements MLO, so operation can continue on other links when one
+ * link is switching.
+ *
* @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
*/
enum ieee80211_hw_flags {
@@ -2750,6 +2841,7 @@ enum ieee80211_hw_flags {
IEEE80211_HW_DETECTS_COLOR_COLLISION,
IEEE80211_HW_MLO_MCAST_MULTI_LINK_TX,
IEEE80211_HW_DISALLOW_PUNCTURING,
+ IEEE80211_HW_HANDLES_QUIET_CSA,
/* keep last, obviously */
NUM_IEEE80211_HW_FLAGS
@@ -4182,7 +4274,7 @@ struct ieee80211_prep_tx_info {
* after a channel switch procedure is completed, allowing the
* driver to go back to a normal configuration.
* @abort_channel_switch: This is an optional callback that is called
- * when channel switch procedure was completed, allowing the
+ * when channel switch procedure was aborted, allowing the
* driver to go back to a normal configuration.
* @channel_switch_rx_beacon: This is an optional callback that is called
* when channel switch procedure is in progress and additional beacon with
@@ -4293,6 +4385,10 @@ struct ieee80211_prep_tx_info {
* flow offloading for flows originating from the vif.
* Note that the driver must not assume that the vif driver_data is valid
* at this point, since the callback can be called during netdev teardown.
+ * @can_neg_ttlm: for managed interface, requests the driver to determine
+ * if the requested TID-To-Link mapping can be accepted or not.
+ * If it's not accepted the driver may suggest a preferred mapping and
+ * modify @ttlm parameter with the suggested TID-to-Link mapping.
*/
struct ieee80211_ops {
void (*tx)(struct ieee80211_hw *hw,
@@ -4574,7 +4670,8 @@ struct ieee80211_ops {
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *link_conf);
void (*abort_channel_switch)(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif);
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *link_conf);
void (*channel_switch_rx_beacon)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_channel_switch *ch_switch);
@@ -4673,6 +4770,9 @@ struct ieee80211_ops {
struct net_device *dev,
enum tc_setup_type type,
void *type_data);
+ enum ieee80211_neg_ttlm_res
+ (*can_neg_ttlm)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_neg_ttlm *ttlm);
};
/**
@@ -5455,6 +5555,7 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
/**
* ieee80211_beacon_update_cntdwn - request mac80211 to decrement the beacon countdown
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @link_id: valid link_id during MLO or 0 for non-MLO
*
* The beacon counter should be updated after each beacon transmission.
* This function is called implicitly when
@@ -5464,7 +5565,8 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
*
* Return: new countdown value
*/
-u8 ieee80211_beacon_update_cntdwn(struct ieee80211_vif *vif);
+u8 ieee80211_beacon_update_cntdwn(struct ieee80211_vif *vif,
+ unsigned int link_id);
/**
* ieee80211_beacon_set_cntdwn - request mac80211 to set beacon countdown
@@ -5482,20 +5584,23 @@ void ieee80211_beacon_set_cntdwn(struct ieee80211_vif *vif, u8 counter);
/**
* ieee80211_csa_finish - notify mac80211 about channel switch
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @link_id: valid link_id during MLO or 0 for non-MLO
*
* After a channel switch announcement was scheduled and the counter in this
* announcement hits 1, this function must be called by the driver to
* notify mac80211 that the channel can be changed.
*/
-void ieee80211_csa_finish(struct ieee80211_vif *vif);
+void ieee80211_csa_finish(struct ieee80211_vif *vif, unsigned int link_id);
/**
* ieee80211_beacon_cntdwn_is_complete - find out if countdown reached 1
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @link_id: valid link_id during MLO or 0 for non-MLO
*
* This function returns whether the countdown reached zero.
*/
-bool ieee80211_beacon_cntdwn_is_complete(struct ieee80211_vif *vif);
+bool ieee80211_beacon_cntdwn_is_complete(struct ieee80211_vif *vif,
+ unsigned int link_id);
/**
* ieee80211_color_change_finish - notify mac80211 about color change
@@ -5831,6 +5936,7 @@ void ieee80211_remove_key(struct ieee80211_key_conf *keyconf);
* ieee80211_gtk_rekey_add - add a GTK key from rekeying during WoWLAN
* @vif: the virtual interface to add the key on
* @keyconf: new key data
+ * @link_id: the link id of the key or -1 for non-MLO
*
* When GTK rekeying was done while the system was suspended, (a) new
* key(s) will be available. These will be needed by mac80211 for proper
@@ -5858,7 +5964,8 @@ void ieee80211_remove_key(struct ieee80211_key_conf *keyconf);
*/
struct ieee80211_key_conf *
ieee80211_gtk_rekey_add(struct ieee80211_vif *vif,
- struct ieee80211_key_conf *keyconf);
+ struct ieee80211_key_conf *keyconf,
+ int link_id);
/**
* ieee80211_gtk_rekey_notify - notify userspace supplicant of rekeying
@@ -7416,11 +7523,10 @@ ieee80211_get_unsol_bcast_probe_resp_tmpl(struct ieee80211_hw *hw,
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @color_bitmap: a 64 bit bitmap representing the colors that the local BSS is
* aware of.
- * @gfp: allocation flags
*/
void
ieee80211_obss_color_collision_notify(struct ieee80211_vif *vif,
- u64 color_bitmap, gfp_t gfp);
+ u64 color_bitmap);
/**
* ieee80211_is_tx_data - check if frame is a data frame
@@ -7480,4 +7586,17 @@ int ieee80211_set_active_links(struct ieee80211_vif *vif, u16 active_links);
void ieee80211_set_active_links_async(struct ieee80211_vif *vif,
u16 active_links);
+/* for older drivers - let's not document these ... */
+int ieee80211_emulate_add_chanctx(struct ieee80211_hw *hw,
+ struct ieee80211_chanctx_conf *ctx);
+void ieee80211_emulate_remove_chanctx(struct ieee80211_hw *hw,
+ struct ieee80211_chanctx_conf *ctx);
+void ieee80211_emulate_change_chanctx(struct ieee80211_hw *hw,
+ struct ieee80211_chanctx_conf *ctx,
+ u32 changed);
+int ieee80211_emulate_switch_vif_chanctx(struct ieee80211_hw *hw,
+ struct ieee80211_vif_chanctx_switch *vifs,
+ int n_vifs,
+ enum ieee80211_chanctx_switch_mode mode);
+
#endif /* MAC80211_H */
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-14 19:16:40 +0300