diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/ipmi.h | 105 | ||||
| -rw-r--r-- | include/linux/ipmi_smi.h | 115 |
2 files changed, 134 insertions, 86 deletions
diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h index 39a29fb3131b..3474f04cf9aa 100644 --- a/include/linux/ipmi.h +++ b/include/linux/ipmi.h @@ -23,8 +23,10 @@ struct module; struct device; -/* Opaque type for a IPMI message user. One of these is needed to - send and receive messages. */ +/* + * Opaque type for a IPMI message user. One of these is needed to + * send and receive messages. + */ typedef struct ipmi_user *ipmi_user_t; /* @@ -37,8 +39,10 @@ typedef struct ipmi_user *ipmi_user_t; struct ipmi_recv_msg { struct list_head link; - /* The type of message as defined in the "Receive Types" - defines above. */ + /* + * The type of message as defined in the "Receive Types" + * defines above. + */ int recv_type; ipmi_user_t user; @@ -46,19 +50,25 @@ struct ipmi_recv_msg { long msgid; struct kernel_ipmi_msg msg; - /* The user_msg_data is the data supplied when a message was - sent, if this is a response to a sent message. If this is - not a response to a sent message, then user_msg_data will - be NULL. If the user above is NULL, then this will be the - intf. */ + /* + * The user_msg_data is the data supplied when a message was + * sent, if this is a response to a sent message. If this is + * not a response to a sent message, then user_msg_data will + * be NULL. If the user above is NULL, then this will be the + * intf. + */ void *user_msg_data; - /* Call this when done with the message. It will presumably free - the message and do any other necessary cleanup. */ + /* + * Call this when done with the message. It will presumably free + * the message and do any other necessary cleanup. + */ void (*done)(struct ipmi_recv_msg *msg); - /* Place-holder for the data, don't make any assumptions about - the size or existence of this, since it may change. */ + /* + * Place-holder for the data, don't make any assumptions about + * the size or existence of this, since it may change. + */ unsigned char msg_data[IPMI_MAX_MSG_LENGTH]; }; @@ -66,16 +76,20 @@ struct ipmi_recv_msg { void ipmi_free_recv_msg(struct ipmi_recv_msg *msg); struct ipmi_user_hndl { - /* Routine type to call when a message needs to be routed to - the upper layer. This will be called with some locks held, - the only IPMI routines that can be called are ipmi_request - and the alloc/free operations. The handler_data is the - variable supplied when the receive handler was registered. */ + /* + * Routine type to call when a message needs to be routed to + * the upper layer. This will be called with some locks held, + * the only IPMI routines that can be called are ipmi_request + * and the alloc/free operations. The handler_data is the + * variable supplied when the receive handler was registered. + */ void (*ipmi_recv_hndl)(struct ipmi_recv_msg *msg, void *user_msg_data); - /* Called when the interface detects a watchdog pre-timeout. If - this is NULL, it will be ignored for the user. */ + /* + * Called when the interface detects a watchdog pre-timeout. If + * this is NULL, it will be ignored for the user. + */ void (*ipmi_watchdog_pretimeout)(void *handler_data); /* @@ -91,12 +105,14 @@ int ipmi_create_user(unsigned int if_num, void *handler_data, ipmi_user_t *user); -/* Destroy the given user of the IPMI layer. Note that after this - function returns, the system is guaranteed to not call any - callbacks for the user. Thus as long as you destroy all the users - before you unload a module, you will be safe. And if you destroy - the users before you destroy the callback structures, it should be - safe, too. */ +/* + * Destroy the given user of the IPMI layer. Note that after this + * function returns, the system is guaranteed to not call any + * callbacks for the user. Thus as long as you destroy all the users + * before you unload a module, you will be safe. And if you destroy + * the users before you destroy the callback structures, it should be + * safe, too. + */ int ipmi_destroy_user(ipmi_user_t user); /* Get the IPMI version of the BMC we are talking to. */ @@ -104,12 +120,15 @@ int ipmi_get_version(ipmi_user_t user, unsigned char *major, unsigned char *minor); -/* Set and get the slave address and LUN that we will use for our - source messages. Note that this affects the interface, not just - this user, so it will affect all users of this interface. This is - so some initialization code can come in and do the OEM-specific - things it takes to determine your address (if not the BMC) and set - it for everyone else. Note that each channel can have its own address. */ +/* + * Set and get the slave address and LUN that we will use for our + * source messages. Note that this affects the interface, not just + * this user, so it will affect all users of this interface. This is + * so some initialization code can come in and do the OEM-specific + * things it takes to determine your address (if not the BMC) and set + * it for everyone else. Note that each channel can have its own + * address. + */ int ipmi_set_my_address(ipmi_user_t user, unsigned int channel, unsigned char address); @@ -235,14 +254,18 @@ int ipmi_set_gets_events(ipmi_user_t user, bool val); struct ipmi_smi_watcher { struct list_head link; - /* You must set the owner to the current module, if you are in - a module (generally just set it to "THIS_MODULE"). */ + /* + * You must set the owner to the current module, if you are in + * a module (generally just set it to "THIS_MODULE"). + */ struct module *owner; - /* These two are called with read locks held for the interface - the watcher list. So you can add and remove users from the - IPMI interface, send messages, etc., but you cannot add - or remove SMI watchers or SMI interfaces. */ + /* + * These two are called with read locks held for the interface + * the watcher list. So you can add and remove users from the + * IPMI interface, send messages, etc., but you cannot add + * or remove SMI watchers or SMI interfaces. + */ void (*new_smi)(int if_num, struct device *dev); void (*smi_gone)(int if_num); }; @@ -250,8 +273,10 @@ struct ipmi_smi_watcher { int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher); int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher); -/* The following are various helper functions for dealing with IPMI - addresses. */ +/* + * The following are various helper functions for dealing with IPMI + * addresses. + */ /* Return the maximum length of an IPMI address given it's type. */ unsigned int ipmi_addr_length(int addr_type); diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h index af457b5a689e..9e5c3079d232 100644 --- a/include/linux/ipmi_smi.h +++ b/include/linux/ipmi_smi.h @@ -22,8 +22,10 @@ struct device; -/* This files describes the interface for IPMI system management interface - drivers to bind into the IPMI message handler. */ +/* + * This files describes the interface for IPMI system management interface + * drivers to bind into the IPMI message handler. + */ /* Structure for the low-level drivers. */ typedef struct ipmi_smi *ipmi_smi_t; @@ -61,10 +63,12 @@ struct ipmi_smi_msg { struct ipmi_smi_handlers { struct module *owner; - /* The low-level interface cannot start sending messages to - the upper layer until this function is called. This may - not be NULL, the lower layer must take the interface from - this call. */ + /* + * The low-level interface cannot start sending messages to + * the upper layer until this function is called. This may + * not be NULL, the lower layer must take the interface from + * this call. + */ int (*start_processing)(void *send_info, ipmi_smi_t new_intf); @@ -75,25 +79,31 @@ struct ipmi_smi_handlers { */ int (*get_smi_info)(void *send_info, struct ipmi_smi_info *data); - /* Called to enqueue an SMI message to be sent. This - operation is not allowed to fail. If an error occurs, it - should report back the error in a received message. It may - do this in the current call context, since no write locks - are held when this is run. Message are delivered one at - a time by the message handler, a new message will not be - delivered until the previous message is returned. */ + /* + * Called to enqueue an SMI message to be sent. This + * operation is not allowed to fail. If an error occurs, it + * should report back the error in a received message. It may + * do this in the current call context, since no write locks + * are held when this is run. Message are delivered one at + * a time by the message handler, a new message will not be + * delivered until the previous message is returned. + */ void (*sender)(void *send_info, struct ipmi_smi_msg *msg); - /* Called by the upper layer to request that we try to get - events from the BMC we are attached to. */ + /* + * Called by the upper layer to request that we try to get + * events from the BMC we are attached to. + */ void (*request_events)(void *send_info); - /* Called by the upper layer when some user requires that the - interface watch for events, received messages, watchdog - pretimeouts, or not. Used by the SMI to know if it should - watch for these. This may be NULL if the SMI does not - implement it. */ + /* + * Called by the upper layer when some user requires that the + * interface watch for events, received messages, watchdog + * pretimeouts, or not. Used by the SMI to know if it should + * watch for these. This may be NULL if the SMI does not + * implement it. + */ void (*set_need_watch)(void *send_info, bool enable); /* @@ -101,28 +111,36 @@ struct ipmi_smi_handlers { */ void (*flush_messages)(void *send_info); - /* Called when the interface should go into "run to - completion" mode. If this call sets the value to true, the - interface should make sure that all messages are flushed - out and that none are pending, and any new requests are run - to completion immediately. */ + /* + * Called when the interface should go into "run to + * completion" mode. If this call sets the value to true, the + * interface should make sure that all messages are flushed + * out and that none are pending, and any new requests are run + * to completion immediately. + */ void (*set_run_to_completion)(void *send_info, bool run_to_completion); - /* Called to poll for work to do. This is so upper layers can - poll for operations during things like crash dumps. */ + /* + * Called to poll for work to do. This is so upper layers can + * poll for operations during things like crash dumps. + */ void (*poll)(void *send_info); - /* Enable/disable firmware maintenance mode. Note that this - is *not* the modes defined, this is simply an on/off - setting. The message handler does the mode handling. Note - that this is called from interrupt context, so it cannot - block. */ + /* + * Enable/disable firmware maintenance mode. Note that this + * is *not* the modes defined, this is simply an on/off + * setting. The message handler does the mode handling. Note + * that this is called from interrupt context, so it cannot + * block. + */ void (*set_maintenance_mode)(void *send_info, bool enable); - /* Tell the handler that we are using it/not using it. The - message handler get the modules that this handler belongs - to; this function lets the SMI claim any modules that it - uses. These may be NULL if this is not required. */ + /* + * Tell the handler that we are using it/not using it. The + * message handler get the modules that this handler belongs + * to; this function lets the SMI claim any modules that it + * uses. These may be NULL if this is not required. + */ int (*inc_usecount)(void *send_info); void (*dec_usecount)(void *send_info); }; @@ -143,7 +161,8 @@ struct ipmi_device_id { #define ipmi_version_major(v) ((v)->ipmi_version & 0xf) #define ipmi_version_minor(v) ((v)->ipmi_version >> 4) -/* Take a pointer to an IPMI response and extract device id information from +/* + * Take a pointer to an IPMI response and extract device id information from * it. @netfn is in the IPMI_NETFN_ format, so may need to be shifted from * a SI response. */ @@ -187,12 +206,14 @@ static inline int ipmi_demangle_device_id(uint8_t netfn, uint8_t cmd, return 0; } -/* Add a low-level interface to the IPMI driver. Note that if the - interface doesn't know its slave address, it should pass in zero. - The low-level interface should not deliver any messages to the - upper layer until the start_processing() function in the handlers - is called, and the lower layer must get the interface from that - call. */ +/* + * Add a low-level interface to the IPMI driver. Note that if the + * interface doesn't know its slave address, it should pass in zero. + * The low-level interface should not deliver any messages to the + * upper layer until the start_processing() function in the handlers + * is called, and the lower layer must get the interface from that + * call. + */ int ipmi_register_smi(const struct ipmi_smi_handlers *handlers, void *send_info, struct device *dev, @@ -223,9 +244,11 @@ static inline void ipmi_free_smi_msg(struct ipmi_smi_msg *msg) } #ifdef CONFIG_IPMI_PROC_INTERFACE -/* Allow the lower layer to add things to the proc filesystem - directory for this interface. Note that the entry will - automatically be dstroyed when the interface is destroyed. */ +/* + * Allow the lower layer to add things to the proc filesystem + * directory for this interface. Note that the entry will + * automatically be dstroyed when the interface is destroyed. + */ int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name, const struct file_operations *proc_ops, void *data); |