diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/fbcon.h | 7 | ||||
| -rw-r--r-- | include/linux/habanalabs/cpucp_if.h | 4 | ||||
| -rw-r--r-- | include/linux/hid.h | 2 | ||||
| -rw-r--r-- | include/linux/iopoll.h | 136 | ||||
| -rw-r--r-- | include/linux/list.h | 14 | ||||
| -rw-r--r-- | include/linux/mei_cl_bus.h | 1 | ||||
| -rw-r--r-- | include/linux/overflow.h | 70 | ||||
| -rw-r--r-- | include/linux/screen_info.h | 2 |
8 files changed, 197 insertions, 39 deletions
diff --git a/include/linux/fbcon.h b/include/linux/fbcon.h index 2382dec6d6ab..81f0e698acbf 100644 --- a/include/linux/fbcon.h +++ b/include/linux/fbcon.h @@ -1,6 +1,13 @@ #ifndef _LINUX_FBCON_H #define _LINUX_FBCON_H +#include <linux/compiler_types.h> + +struct fb_blit_caps; +struct fb_info; +struct fb_var_screeninfo; +struct fb_videomode; + #ifdef CONFIG_FRAMEBUFFER_CONSOLE void __init fb_console_init(void); void __exit fb_console_exit(void); diff --git a/include/linux/habanalabs/cpucp_if.h b/include/linux/habanalabs/cpucp_if.h index 7ed3fdd55dda..45f181bcf890 100644 --- a/include/linux/habanalabs/cpucp_if.h +++ b/include/linux/habanalabs/cpucp_if.h @@ -1425,9 +1425,13 @@ struct cpucp_monitor_dump { * from "pkt_subidx" field in struct cpucp_packet. * * HL_PASSTHROUGHT_VERSIONS - Fetch all firmware versions. + * HL_GET_ERR_COUNTERS_CMD - Command to get error counters + * HL_GET_P_STATE - get performance state */ enum hl_passthrough_type { HL_PASSTHROUGH_VERSIONS, + HL_GET_ERR_COUNTERS_CMD, + HL_GET_P_STATE, }; #endif /* CPUCP_IF_H */ diff --git a/include/linux/hid.h b/include/linux/hid.h index 2cc4f1e4ea96..c32425b5d011 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -364,6 +364,7 @@ struct hid_item { * | @HID_QUIRK_HAVE_SPECIAL_DRIVER: * | @HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE: * | @HID_QUIRK_IGNORE_SPECIAL_DRIVER + * | @HID_QUIRK_POWER_ON_AFTER_BACKLIGHT * | @HID_QUIRK_FULLSPEED_INTERVAL: * | @HID_QUIRK_NO_INIT_REPORTS: * | @HID_QUIRK_NO_IGNORE: @@ -391,6 +392,7 @@ struct hid_item { #define HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE BIT(20) #define HID_QUIRK_NOINVERT BIT(21) #define HID_QUIRK_IGNORE_SPECIAL_DRIVER BIT(22) +#define HID_QUIRK_POWER_ON_AFTER_BACKLIGHT BIT(23) #define HID_QUIRK_FULLSPEED_INTERVAL BIT(28) #define HID_QUIRK_NO_INIT_REPORTS BIT(29) #define HID_QUIRK_NO_IGNORE BIT(30) diff --git a/include/linux/iopoll.h b/include/linux/iopoll.h index 91324c331a4b..bdd2e0652bc3 100644 --- a/include/linux/iopoll.h +++ b/include/linux/iopoll.h @@ -14,62 +14,64 @@ #include <linux/io.h> /** - * read_poll_timeout - Periodically poll an address until a condition is - * met or a timeout occurs - * @op: accessor function (takes @args as its arguments) - * @val: Variable to read the value into - * @cond: Break condition (usually involving @val) - * @sleep_us: Maximum time to sleep between reads in us (0 tight-loops). Please - * read usleep_range() function description for details and + * poll_timeout_us - Periodically poll and perform an operation until + * a condition is met or a timeout occurs + * + * @op: Operation + * @cond: Break condition + * @sleep_us: Maximum time to sleep between operations in us (0 tight-loops). + * Please read usleep_range() function description for details and * limitations. * @timeout_us: Timeout in us, 0 means never timeout - * @sleep_before_read: if it is true, sleep @sleep_us before read. - * @args: arguments for @op poll + * @sleep_before_op: if it is true, sleep @sleep_us before operation. * * When available, you'll probably want to use one of the specialized * macros defined below rather than this macro directly. * - * Returns: 0 on success and -ETIMEDOUT upon a timeout. In either - * case, the last read value at @args is stored in @val. Must not + * Returns: 0 on success and -ETIMEDOUT upon a timeout. Must not * be called from atomic context if sleep_us or timeout_us are used. */ -#define read_poll_timeout(op, val, cond, sleep_us, timeout_us, \ - sleep_before_read, args...) \ +#define poll_timeout_us(op, cond, sleep_us, timeout_us, sleep_before_op) \ ({ \ u64 __timeout_us = (timeout_us); \ unsigned long __sleep_us = (sleep_us); \ ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \ + int ___ret; \ might_sleep_if((__sleep_us) != 0); \ - if (sleep_before_read && __sleep_us) \ + if ((sleep_before_op) && __sleep_us) \ usleep_range((__sleep_us >> 2) + 1, __sleep_us); \ for (;;) { \ - (val) = op(args); \ - if (cond) \ + bool __expired = __timeout_us && \ + ktime_compare(ktime_get(), __timeout) > 0; \ + /* guarantee 'op' and 'cond' are evaluated after timeout expired */ \ + barrier(); \ + op; \ + if (cond) { \ + ___ret = 0; \ break; \ - if (__timeout_us && \ - ktime_compare(ktime_get(), __timeout) > 0) { \ - (val) = op(args); \ + } \ + if (__expired) { \ + ___ret = -ETIMEDOUT; \ break; \ } \ if (__sleep_us) \ usleep_range((__sleep_us >> 2) + 1, __sleep_us); \ cpu_relax(); \ } \ - (cond) ? 0 : -ETIMEDOUT; \ + ___ret; \ }) /** - * read_poll_timeout_atomic - Periodically poll an address until a condition is - * met or a timeout occurs - * @op: accessor function (takes @args as its arguments) - * @val: Variable to read the value into - * @cond: Break condition (usually involving @val) - * @delay_us: Time to udelay between reads in us (0 tight-loops). Please - * read udelay() function description for details and + * poll_timeout_us_atomic - Periodically poll and perform an operation until + * a condition is met or a timeout occurs + * + * @op: Operation + * @cond: Break condition + * @delay_us: Time to udelay between operations in us (0 tight-loops). + * Please read udelay() function description for details and * limitations. * @timeout_us: Timeout in us, 0 means never timeout - * @delay_before_read: if it is true, delay @delay_us before read. - * @args: arguments for @op poll + * @delay_before_op: if it is true, delay @delay_us before operation. * * This macro does not rely on timekeeping. Hence it is safe to call even when * timekeeping is suspended, at the expense of an underestimation of wall clock @@ -78,27 +80,32 @@ * When available, you'll probably want to use one of the specialized * macros defined below rather than this macro directly. * - * Returns: 0 on success and -ETIMEDOUT upon a timeout. In either - * case, the last read value at @args is stored in @val. + * Returns: 0 on success and -ETIMEDOUT upon a timeout. */ -#define read_poll_timeout_atomic(op, val, cond, delay_us, timeout_us, \ - delay_before_read, args...) \ +#define poll_timeout_us_atomic(op, cond, delay_us, timeout_us, \ + delay_before_op) \ ({ \ u64 __timeout_us = (timeout_us); \ s64 __left_ns = __timeout_us * NSEC_PER_USEC; \ unsigned long __delay_us = (delay_us); \ u64 __delay_ns = __delay_us * NSEC_PER_USEC; \ - if (delay_before_read && __delay_us) { \ + int ___ret; \ + if ((delay_before_op) && __delay_us) { \ udelay(__delay_us); \ if (__timeout_us) \ __left_ns -= __delay_ns; \ } \ for (;;) { \ - (val) = op(args); \ - if (cond) \ + bool __expired = __timeout_us && __left_ns < 0; \ + /* guarantee 'op' and 'cond' are evaluated after timeout expired */ \ + barrier(); \ + op; \ + if (cond) { \ + ___ret = 0; \ break; \ - if (__timeout_us && __left_ns < 0) { \ - (val) = op(args); \ + } \ + if (__expired) { \ + ___ret = -ETIMEDOUT; \ break; \ } \ if (__delay_us) { \ @@ -110,10 +117,61 @@ if (__timeout_us) \ __left_ns--; \ } \ - (cond) ? 0 : -ETIMEDOUT; \ + ___ret; \ }) /** + * read_poll_timeout - Periodically poll an address until a condition is + * met or a timeout occurs + * @op: accessor function (takes @args as its arguments) + * @val: Variable to read the value into + * @cond: Break condition (usually involving @val) + * @sleep_us: Maximum time to sleep between reads in us (0 tight-loops). Please + * read usleep_range() function description for details and + * limitations. + * @timeout_us: Timeout in us, 0 means never timeout + * @sleep_before_read: if it is true, sleep @sleep_us before read. + * @args: arguments for @op poll + * + * When available, you'll probably want to use one of the specialized + * macros defined below rather than this macro directly. + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout. In either + * case, the last read value at @args is stored in @val. Must not + * be called from atomic context if sleep_us or timeout_us are used. + */ +#define read_poll_timeout(op, val, cond, sleep_us, timeout_us, \ + sleep_before_read, args...) \ + poll_timeout_us((val) = op(args), cond, sleep_us, timeout_us, sleep_before_read) + +/** + * read_poll_timeout_atomic - Periodically poll an address until a condition is + * met or a timeout occurs + * @op: accessor function (takes @args as its arguments) + * @val: Variable to read the value into + * @cond: Break condition (usually involving @val) + * @delay_us: Time to udelay between reads in us (0 tight-loops). Please + * read udelay() function description for details and + * limitations. + * @timeout_us: Timeout in us, 0 means never timeout + * @delay_before_read: if it is true, delay @delay_us before read. + * @args: arguments for @op poll + * + * This macro does not rely on timekeeping. Hence it is safe to call even when + * timekeeping is suspended, at the expense of an underestimation of wall clock + * time, which is rather minimal with a non-zero delay_us. + * + * When available, you'll probably want to use one of the specialized + * macros defined below rather than this macro directly. + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout. In either + * case, the last read value at @args is stored in @val. + */ +#define read_poll_timeout_atomic(op, val, cond, sleep_us, timeout_us, \ + sleep_before_read, args...) \ + poll_timeout_us_atomic((val) = op(args), cond, sleep_us, timeout_us, sleep_before_read) + +/** * readx_poll_timeout - Periodically poll an address until a condition is met or a timeout occurs * @op: accessor function (takes @addr as its only argument) * @addr: Address to poll diff --git a/include/linux/list.h b/include/linux/list.h index e7e28afd28f8..7f7657e41620 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -637,6 +637,20 @@ static inline void list_splice_tail_init(struct list_head *list, }) /** + * list_last_entry_or_null - get the last element from a list + * @ptr: the list head to take the element from. + * @type: the type of the struct this is embedded in. + * @member: the name of the list_head within the struct. + * + * Note that if the list is empty, it returns NULL. + */ +#define list_last_entry_or_null(ptr, type, member) ({ \ + struct list_head *head__ = (ptr); \ + struct list_head *pos__ = READ_ONCE(head__->prev); \ + pos__ != head__ ? list_entry(pos__, type, member) : NULL; \ +}) + +/** * list_next_entry - get the next element in list * @pos: the type * to cursor * @member: the name of the list_head within the struct. diff --git a/include/linux/mei_cl_bus.h b/include/linux/mei_cl_bus.h index 725fd7727422..a82755e1fc40 100644 --- a/include/linux/mei_cl_bus.h +++ b/include/linux/mei_cl_bus.h @@ -113,6 +113,7 @@ int mei_cldev_register_notif_cb(struct mei_cl_device *cldev, mei_cldev_cb_t notif_cb); u8 mei_cldev_ver(const struct mei_cl_device *cldev); +size_t mei_cldev_mtu(const struct mei_cl_device *cldev); void *mei_cldev_get_drvdata(const struct mei_cl_device *cldev); void mei_cldev_set_drvdata(struct mei_cl_device *cldev, void *data); diff --git a/include/linux/overflow.h b/include/linux/overflow.h index 154ed0dbb43f..725f95f7e416 100644 --- a/include/linux/overflow.h +++ b/include/linux/overflow.h @@ -239,6 +239,76 @@ static inline bool __must_check __must_check_overflow(bool overflow) __overflows_type(n, T)) /** + * range_overflows() - Check if a range is out of bounds + * @start: Start of the range. + * @size: Size of the range. + * @max: Exclusive upper boundary. + * + * A strict check to determine if the range [@start, @start + @size) is + * invalid with respect to the allowable range [0, @max). Any range + * starting at or beyond @max is considered an overflow, even if @size is 0. + * + * Returns: true if the range is out of bounds. + */ +#define range_overflows(start, size, max) ({ \ + typeof(start) start__ = (start); \ + typeof(size) size__ = (size); \ + typeof(max) max__ = (max); \ + (void)(&start__ == &size__); \ + (void)(&start__ == &max__); \ + start__ >= max__ || size__ > max__ - start__; \ +}) + +/** + * range_overflows_t() - Check if a range is out of bounds + * @type: Data type to use. + * @start: Start of the range. + * @size: Size of the range. + * @max: Exclusive upper boundary. + * + * Same as range_overflows() but forcing the parameters to @type. + * + * Returns: true if the range is out of bounds. + */ +#define range_overflows_t(type, start, size, max) \ + range_overflows((type)(start), (type)(size), (type)(max)) + +/** + * range_end_overflows() - Check if a range's endpoint is out of bounds + * @start: Start of the range. + * @size: Size of the range. + * @max: Exclusive upper boundary. + * + * Checks only if the endpoint of a range (@start + @size) exceeds @max. + * Unlike range_overflows(), a zero-sized range at the boundary (@start == @max) + * is not considered an overflow. Useful for iterator-style checks. + * + * Returns: true if the endpoint exceeds the boundary. + */ +#define range_end_overflows(start, size, max) ({ \ + typeof(start) start__ = (start); \ + typeof(size) size__ = (size); \ + typeof(max) max__ = (max); \ + (void)(&start__ == &size__); \ + (void)(&start__ == &max__); \ + start__ > max__ || size__ > max__ - start__; \ +}) + +/** + * range_end_overflows_t() - Check if a range's endpoint is out of bounds + * @type: Data type to use. + * @start: Start of the range. + * @size: Size of the range. + * @max: Exclusive upper boundary. + * + * Same as range_end_overflows() but forcing the parameters to @type. + * + * Returns: true if the endpoint exceeds the boundary. + */ +#define range_end_overflows_t(type, start, size, max) \ + range_end_overflows((type)(start), (type)(size), (type)(max)) + +/** * castable_to_type - like __same_type(), but also allows for casted literals * * @n: variable or constant value diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h index 923d68e07679..1690706206e8 100644 --- a/include/linux/screen_info.h +++ b/include/linux/screen_info.h @@ -12,6 +12,7 @@ #define SCREEN_INFO_MAX_RESOURCES 3 struct pci_dev; +struct pixel_format; struct resource; static inline bool __screen_info_has_lfb(unsigned int type) @@ -136,6 +137,7 @@ static inline u32 __screen_info_vesapm_info_base(const struct screen_info *si) ssize_t screen_info_resources(const struct screen_info *si, struct resource *r, size_t num); u32 __screen_info_lfb_bits_per_pixel(const struct screen_info *si); +int screen_info_pixel_format(const struct screen_info *si, struct pixel_format *f); #if defined(CONFIG_PCI) void screen_info_apply_fixups(void); |