diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/mailbox/mtk-cmdq-mailbox.h | 6 | ||||
| -rw-r--r-- | include/linux/pruss_driver.h | 54 | ||||
| -rw-r--r-- | include/linux/qcom-geni-se.h | 4 | ||||
| -rw-r--r-- | include/linux/scmi_protocol.h | 32 | ||||
| -rw-r--r-- | include/linux/soc/mediatek/mtk-cmdq.h | 93 | ||||
| -rw-r--r-- | include/linux/tee_drv.h | 3 |
6 files changed, 179 insertions, 13 deletions
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h index 05eea1aef5aa..d5a983d65f05 100644 --- a/include/linux/mailbox/mtk-cmdq-mailbox.h +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h @@ -28,8 +28,7 @@ * bit 16-27: update value * bit 31: 1 - update, 0 - no update */ -#define CMDQ_WFE_OPTION (CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | \ - CMDQ_WFE_WAIT_VALUE) +#define CMDQ_WFE_OPTION (CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE) /** cmdq event maximum */ #define CMDQ_MAX_EVENT 0x3ff @@ -60,6 +59,9 @@ enum cmdq_code { CMDQ_CODE_JUMP = 0x10, CMDQ_CODE_WFE = 0x20, CMDQ_CODE_EOC = 0x40, + CMDQ_CODE_READ_S = 0x80, + CMDQ_CODE_WRITE_S = 0x90, + CMDQ_CODE_WRITE_S_MASK = 0x91, CMDQ_CODE_LOGIC = 0xa0, }; diff --git a/include/linux/pruss_driver.h b/include/linux/pruss_driver.h new file mode 100644 index 000000000000..ecfded30ed05 --- /dev/null +++ b/include/linux/pruss_driver.h @@ -0,0 +1,54 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * PRU-ICSS sub-system specific definitions + * + * Copyright (C) 2014-2020 Texas Instruments Incorporated - http://www.ti.com/ + * Suman Anna <s-anna@ti.com> + */ + +#ifndef _PRUSS_DRIVER_H_ +#define _PRUSS_DRIVER_H_ + +#include <linux/types.h> + +/* + * enum pruss_mem - PRUSS memory range identifiers + */ +enum pruss_mem { + PRUSS_MEM_DRAM0 = 0, + PRUSS_MEM_DRAM1, + PRUSS_MEM_SHRD_RAM2, + PRUSS_MEM_MAX, +}; + +/** + * struct pruss_mem_region - PRUSS memory region structure + * @va: kernel virtual address of the PRUSS memory region + * @pa: physical (bus) address of the PRUSS memory region + * @size: size of the PRUSS memory region + */ +struct pruss_mem_region { + void __iomem *va; + phys_addr_t pa; + size_t size; +}; + +/** + * struct pruss - PRUSS parent structure + * @dev: pruss device pointer + * @cfg_base: base iomap for CFG region + * @cfg_regmap: regmap for config region + * @mem_regions: data for each of the PRUSS memory regions + * @core_clk_mux: clk handle for PRUSS CORE_CLK_MUX + * @iep_clk_mux: clk handle for PRUSS IEP_CLK_MUX + */ +struct pruss { + struct device *dev; + void __iomem *cfg_base; + struct regmap *cfg_regmap; + struct pruss_mem_region mem_regions[PRUSS_MEM_MAX]; + struct clk *core_clk_mux; + struct clk *iep_clk_mux; +}; + +#endif /* _PRUSS_DRIVER_H_ */ diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h index 1c31f26ccc7a..f7bbea3f09ca 100644 --- a/include/linux/qcom-geni-se.h +++ b/include/linux/qcom-geni-se.h @@ -299,7 +299,7 @@ static inline void geni_se_setup_m_cmd(struct geni_se *se, u32 cmd, u32 params) u32 m_cmd; m_cmd = (cmd << M_OPCODE_SHFT) | (params & M_PARAMS_MSK); - writel_relaxed(m_cmd, se->base + SE_GENI_M_CMD0); + writel(m_cmd, se->base + SE_GENI_M_CMD0); } /** @@ -319,7 +319,7 @@ static inline void geni_se_setup_s_cmd(struct geni_se *se, u32 cmd, u32 params) s_cmd &= ~(S_OPCODE_MSK | S_PARAMS_MSK); s_cmd |= (cmd << S_OPCODE_SHFT); s_cmd |= (params & S_PARAMS_MSK); - writel_relaxed(s_cmd, se->base + SE_GENI_S_CMD0); + writel(s_cmd, se->base + SE_GENI_S_CMD0); } /** diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h index 7e5dd7d1e221..9cd312a1ff92 100644 --- a/include/linux/scmi_protocol.h +++ b/include/linux/scmi_protocol.h @@ -279,12 +279,12 @@ struct scmi_notify_ops { struct scmi_handle { struct device *dev; struct scmi_revision_info *version; - struct scmi_perf_ops *perf_ops; - struct scmi_clk_ops *clk_ops; - struct scmi_power_ops *power_ops; - struct scmi_sensor_ops *sensor_ops; - struct scmi_reset_ops *reset_ops; - struct scmi_notify_ops *notify_ops; + const struct scmi_perf_ops *perf_ops; + const struct scmi_clk_ops *clk_ops; + const struct scmi_power_ops *power_ops; + const struct scmi_sensor_ops *sensor_ops; + const struct scmi_reset_ops *reset_ops; + const struct scmi_notify_ops *notify_ops; /* for protocol internal use */ void *perf_priv; void *clk_priv; @@ -292,6 +292,7 @@ struct scmi_handle { void *sensor_priv; void *reset_priv; void *notify_priv; + void *system_priv; }; enum scmi_std_protocol { @@ -304,6 +305,15 @@ enum scmi_std_protocol { SCMI_PROTOCOL_RESET = 0x16, }; +enum scmi_system_events { + SCMI_SYSTEM_SHUTDOWN, + SCMI_SYSTEM_COLDRESET, + SCMI_SYSTEM_WARMRESET, + SCMI_SYSTEM_POWERUP, + SCMI_SYSTEM_SUSPEND, + SCMI_SYSTEM_MAX +}; + struct scmi_device { u32 id; u8 protocol_id; @@ -335,7 +345,7 @@ struct scmi_driver { #define to_scmi_driver(d) container_of(d, struct scmi_driver, driver) -#ifdef CONFIG_ARM_SCMI_PROTOCOL +#if IS_REACHABLE(CONFIG_ARM_SCMI_PROTOCOL) int scmi_driver_register(struct scmi_driver *driver, struct module *owner, const char *mod_name); void scmi_driver_unregister(struct scmi_driver *driver); @@ -378,6 +388,7 @@ enum scmi_notification_events { SCMI_EVENT_SENSOR_TRIP_POINT_EVENT = 0x0, SCMI_EVENT_RESET_ISSUED = 0x0, SCMI_EVENT_BASE_ERROR_EVENT = 0x0, + SCMI_EVENT_SYSTEM_POWER_STATE_NOTIFIER = 0x0, }; struct scmi_power_state_changed_report { @@ -387,6 +398,13 @@ struct scmi_power_state_changed_report { unsigned int power_state; }; +struct scmi_system_power_state_notifier_report { + ktime_t timestamp; + unsigned int agent_id; + unsigned int flags; + unsigned int system_state; +}; + struct scmi_perf_limits_report { ktime_t timestamp; unsigned int agent_id; diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h index 2249ecaf77e4..960704d75994 100644 --- a/include/linux/soc/mediatek/mtk-cmdq.h +++ b/include/linux/soc/mediatek/mtk-cmdq.h @@ -12,6 +12,8 @@ #include <linux/timer.h> #define CMDQ_NO_TIMEOUT 0xffffffffu +#define CMDQ_ADDR_HIGH(addr) ((u32)(((addr) >> 16) & GENMASK(31, 0))) +#define CMDQ_ADDR_LOW(addr) ((u16)(addr) | BIT(1)) struct cmdq_pkt; @@ -102,14 +104,90 @@ int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value); int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value, u32 mask); +/* + * cmdq_pkt_read_s() - append read_s command to the CMDQ packet + * @pkt: the CMDQ packet + * @high_addr_reg_idx: internal register ID which contains high address of pa + * @addr_low: low address of pa + * @reg_idx: the CMDQ internal register ID to cache read data + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low, + u16 reg_idx); + +/** + * cmdq_pkt_write_s() - append write_s command to the CMDQ packet + * @pkt: the CMDQ packet + * @high_addr_reg_idx: internal register ID which contains high address of pa + * @addr_low: low address of pa + * @src_reg_idx: the CMDQ internal register ID which cache source value + * + * Return: 0 for success; else the error code is returned + * + * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH() + * to get high address and call cmdq_pkt_assign() to assign value into internal + * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when + * call to this function. + */ +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, + u16 addr_low, u16 src_reg_idx); + +/** + * cmdq_pkt_write_s_mask() - append write_s with mask command to the CMDQ packet + * @pkt: the CMDQ packet + * @high_addr_reg_idx: internal register ID which contains high address of pa + * @addr_low: low address of pa + * @src_reg_idx: the CMDQ internal register ID which cache source value + * @mask: the specified target address mask, use U32_MAX if no need + * + * Return: 0 for success; else the error code is returned + * + * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH() + * to get high address and call cmdq_pkt_assign() to assign value into internal + * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when + * call to this function. + */ +int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, + u16 addr_low, u16 src_reg_idx, u32 mask); + +/** + * cmdq_pkt_write_s_value() - append write_s command to the CMDQ packet which + * write value to a physical address + * @pkt: the CMDQ packet + * @high_addr_reg_idx: internal register ID which contains high address of pa + * @addr_low: low address of pa + * @value: the specified target value + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, + u16 addr_low, u32 value); + +/** + * cmdq_pkt_write_s_mask_value() - append write_s command with mask to the CMDQ + * packet which write value to a physical + * address + * @pkt: the CMDQ packet + * @high_addr_reg_idx: internal register ID which contains high address of pa + * @addr_low: low address of pa + * @value: the specified target value + * @mask: the specified target mask + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, + u16 addr_low, u32 value, u32 mask); + /** * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet * @pkt: the CMDQ packet - * @event: the desired event type to "wait and CLEAR" + * @event: the desired event type to wait + * @clear: clear event or not after event arrive * * Return: 0 for success; else the error code is returned */ -int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event); +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear); /** * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet @@ -176,6 +254,17 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys, int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value); /** + * cmdq_pkt_jump() - Append jump command to the CMDQ packet, ask GCE + * to execute an instruction that change current thread PC to + * a physical address which should contains more instruction. + * @pkt: the CMDQ packet + * @addr: physical address of target instruction buffer + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr); + +/** * cmdq_pkt_finalize() - Append EOC and jump command to pkt. * @pkt: the CMDQ packet * diff --git a/include/linux/tee_drv.h b/include/linux/tee_drv.h index d074302989dd..cdd049a724b1 100644 --- a/include/linux/tee_drv.h +++ b/include/linux/tee_drv.h @@ -47,6 +47,8 @@ struct tee_shm_pool; * and just return with an error code. It is needed for requests * that arises from TEE based kernel drivers that should be * non-blocking in nature. + * @cap_memref_null: flag indicating if the TEE Client support shared + * memory buffer with a NULL pointer. */ struct tee_context { struct tee_device *teedev; @@ -54,6 +56,7 @@ struct tee_context { struct kref refcount; bool releasing; bool supp_nowait; + bool cap_memref_null; }; struct tee_param_memref { |