diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/ethtool.h | 99 |
1 files changed, 99 insertions, 0 deletions
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 20d197693d34..37eba38da502 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -478,6 +478,98 @@ struct ethtool_module_power_mode_params { }; /** + * struct ethtool_mm_state - 802.3 MAC merge layer state + * @verify_time: + * wait time between verification attempts in ms (according to clause + * 30.14.1.6 aMACMergeVerifyTime) + * @max_verify_time: + * maximum accepted value for the @verify_time variable in set requests + * @verify_status: + * state of the verification state machine of the MM layer (according to + * clause 30.14.1.2 aMACMergeStatusVerify) + * @tx_enabled: + * set if the MM layer is administratively enabled in the TX direction + * (according to clause 30.14.1.3 aMACMergeEnableTx) + * @tx_active: + * set if the MM layer is enabled in the TX direction, which makes FP + * possible (according to 30.14.1.5 aMACMergeStatusTx). This should be + * true if MM is enabled, and the verification status is either verified, + * or disabled. + * @pmac_enabled: + * set if the preemptible MAC is powered on and is able to receive + * preemptible packets and respond to verification frames. + * @verify_enabled: + * set if the Verify function of the MM layer (which sends SMD-V + * verification requests) is administratively enabled (regardless of + * whether it is currently in the ETHTOOL_MM_VERIFY_STATUS_DISABLED state + * or not), according to clause 30.14.1.4 aMACMergeVerifyDisableTx (but + * using positive rather than negative logic). The device should always + * respond to received SMD-V requests as long as @pmac_enabled is set. + * @tx_min_frag_size: + * the minimum size of non-final mPacket fragments that the link partner + * supports receiving, expressed in octets. Compared to the definition + * from clause 30.14.1.7 aMACMergeAddFragSize which is expressed in the + * range 0 to 3 (requiring a translation to the size in octets according + * to the formula 64 * (1 + addFragSize) - 4), a value in a continuous and + * unbounded range can be specified here. + * @rx_min_frag_size: + * the minimum size of non-final mPacket fragments that this device + * supports receiving, expressed in octets. + */ +struct ethtool_mm_state { + u32 verify_time; + u32 max_verify_time; + enum ethtool_mm_verify_status verify_status; + bool tx_enabled; + bool tx_active; + bool pmac_enabled; + bool verify_enabled; + u32 tx_min_frag_size; + u32 rx_min_frag_size; +}; + +/** + * struct ethtool_mm_cfg - 802.3 MAC merge layer configuration + * @verify_time: see struct ethtool_mm_state + * @verify_enabled: see struct ethtool_mm_state + * @tx_enabled: see struct ethtool_mm_state + * @pmac_enabled: see struct ethtool_mm_state + * @tx_min_frag_size: see struct ethtool_mm_state + */ +struct ethtool_mm_cfg { + u32 verify_time; + bool verify_enabled; + bool tx_enabled; + bool pmac_enabled; + u32 tx_min_frag_size; +}; + +/** + * struct ethtool_mm_stats - 802.3 MAC merge layer statistics + * @MACMergeFrameAssErrorCount: + * received MAC frames with reassembly errors + * @MACMergeFrameSmdErrorCount: + * received MAC frames/fragments rejected due to unknown or incorrect SMD + * @MACMergeFrameAssOkCount: + * received MAC frames that were successfully reassembled and passed up + * @MACMergeFragCountRx: + * number of additional correct SMD-C mPackets received due to preemption + * @MACMergeFragCountTx: + * number of additional mPackets sent due to preemption + * @MACMergeHoldCount: + * number of times the MM layer entered the HOLD state, which blocks + * transmission of preemptible traffic + */ +struct ethtool_mm_stats { + u64 MACMergeFrameAssErrorCount; + u64 MACMergeFrameSmdErrorCount; + u64 MACMergeFrameAssOkCount; + u64 MACMergeFragCountRx; + u64 MACMergeFragCountTx; + u64 MACMergeHoldCount; +}; + +/** * struct ethtool_ops - optional netdev operations * @cap_link_lanes_supported: indicates if the driver supports lanes * parameter. @@ -649,6 +741,9 @@ struct ethtool_module_power_mode_params { * plugged-in. * @set_module_power_mode: Set the power mode policy for the plug-in module * used by the network device. + * @get_mm: Query the 802.3 MAC Merge layer state. + * @set_mm: Set the 802.3 MAC Merge layer parameters. + * @get_mm_stats: Query the 802.3 MAC Merge layer statistics. * * All operations are optional (i.e. the function pointer may be set * to %NULL) and callers must take this into account. Callers must @@ -787,6 +882,10 @@ struct ethtool_ops { int (*set_module_power_mode)(struct net_device *dev, const struct ethtool_module_power_mode_params *params, struct netlink_ext_ack *extack); + int (*get_mm)(struct net_device *dev, struct ethtool_mm_state *state); + int (*set_mm)(struct net_device *dev, struct ethtool_mm_cfg *cfg, + struct netlink_ext_ack *extack); + void (*get_mm_stats)(struct net_device *dev, struct ethtool_mm_stats *stats); }; int ethtool_check_ops(const struct ethtool_ops *ops); |