diff options
Diffstat (limited to 'include/linux/mtd')
| -rw-r--r-- | include/linux/mtd/map.h | 12 | ||||
| -rw-r--r-- | include/linux/mtd/nand-qpic-common.h | 28 | ||||
| -rw-r--r-- | include/linux/mtd/nand.h | 5 | ||||
| -rw-r--r-- | include/linux/mtd/rawnand.h | 5 | ||||
| -rw-r--r-- | include/linux/mtd/spinand.h | 166 | ||||
| -rw-r--r-- | include/linux/mtd/ubi.h | 1 |
6 files changed, 133 insertions, 84 deletions
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h index 1b56796f6cb3..75b0b2abc880 100644 --- a/include/linux/mtd/map.h +++ b/include/linux/mtd/map.h @@ -8,16 +8,17 @@ #ifndef __LINUX_MTD_MAP_H__ #define __LINUX_MTD_MAP_H__ -#include <linux/types.h> -#include <linux/list.h> -#include <linux/string.h> #include <linux/bug.h> -#include <linux/kernel.h> #include <linux/io.h> - +#include <linux/ioport.h> +#include <linux/string.h> +#include <linux/types.h> #include <linux/unaligned.h> #include <asm/barrier.h> +struct device_node; +struct module; + #ifdef CONFIG_MTD_MAP_BANK_WIDTH_1 #define map_bankwidth(map) 1 #define map_bankwidth_is_1(map) (map_bankwidth(map) == 1) @@ -188,6 +189,7 @@ typedef union { of living. */ +struct mtd_chip_driver; struct map_info { const char *name; unsigned long size; diff --git a/include/linux/mtd/nand-qpic-common.h b/include/linux/mtd/nand-qpic-common.h index cd7172e6c1bb..e8201d1b7cf9 100644 --- a/include/linux/mtd/nand-qpic-common.h +++ b/include/linux/mtd/nand-qpic-common.h @@ -71,14 +71,10 @@ /* NAND_DEVn_CFG0 bits */ #define DISABLE_STATUS_AFTER_WRITE BIT(4) -#define CW_PER_PAGE 6 #define CW_PER_PAGE_MASK GENMASK(8, 6) -#define UD_SIZE_BYTES 9 #define UD_SIZE_BYTES_MASK GENMASK(18, 9) #define ECC_PARITY_SIZE_BYTES_RS GENMASK(22, 19) -#define SPARE_SIZE_BYTES 23 #define SPARE_SIZE_BYTES_MASK GENMASK(26, 23) -#define NUM_ADDR_CYCLES 27 #define NUM_ADDR_CYCLES_MASK GENMASK(29, 27) #define STATUS_BFR_READ BIT(30) #define SET_RD_MODE_AFTER_STATUS BIT(31) @@ -86,24 +82,20 @@ /* NAND_DEVn_CFG0 bits */ #define DEV0_CFG1_ECC_DISABLE BIT(0) #define WIDE_FLASH BIT(1) -#define NAND_RECOVERY_CYCLES 2 #define NAND_RECOVERY_CYCLES_MASK GENMASK(4, 2) #define CS_ACTIVE_BSY BIT(5) -#define BAD_BLOCK_BYTE_NUM 6 #define BAD_BLOCK_BYTE_NUM_MASK GENMASK(15, 6) #define BAD_BLOCK_IN_SPARE_AREA BIT(16) -#define WR_RD_BSY_GAP 17 #define WR_RD_BSY_GAP_MASK GENMASK(22, 17) #define ENABLE_BCH_ECC BIT(27) /* NAND_DEV0_ECC_CFG bits */ #define ECC_CFG_ECC_DISABLE BIT(0) #define ECC_SW_RESET BIT(1) -#define ECC_MODE 4 #define ECC_MODE_MASK GENMASK(5, 4) -#define ECC_PARITY_SIZE_BYTES_BCH 8 +#define ECC_MODE_4BIT 0 +#define ECC_MODE_8BIT 1 #define ECC_PARITY_SIZE_BYTES_BCH_MASK GENMASK(12, 8) -#define ECC_NUM_DATA_BYTES 16 #define ECC_NUM_DATA_BYTES_MASK GENMASK(25, 16) #define ECC_FORCE_CLK_OPEN BIT(30) @@ -118,7 +110,6 @@ #define SEQ_READ_START_VLD BIT(4) /* NAND_EBI2_ECC_BUF_CFG bits */ -#define NUM_STEPS 0 #define NUM_STEPS_MASK GENMASK(9, 0) /* NAND_ERASED_CW_DETECT_CFG bits */ @@ -139,11 +130,8 @@ #define ERASED_CW (CODEWORD_ALL_ERASED | CODEWORD_ERASED) /* NAND_READ_LOCATION_n bits */ -#define READ_LOCATION_OFFSET 0 #define READ_LOCATION_OFFSET_MASK GENMASK(9, 0) -#define READ_LOCATION_SIZE 16 #define READ_LOCATION_SIZE_MASK GENMASK(25, 16) -#define READ_LOCATION_LAST 31 #define READ_LOCATION_LAST_MASK BIT(31) /* Version Mask */ @@ -199,9 +187,6 @@ */ #define dev_cmd_reg_addr(nandc, reg) ((nandc)->props->dev_cmd_reg_start + (reg)) -/* Returns the NAND register physical address */ -#define nandc_reg_phys(chip, offset) ((chip)->base_phys + (offset)) - /* Returns the dma address for reg read buffer */ #define reg_buf_dma_addr(chip, vaddr) \ ((chip)->reg_read_dma + \ @@ -240,6 +225,9 @@ * @last_data_desc - last DMA desc in data channel (tx/rx). * @last_cmd_desc - last DMA desc in command channel. * @txn_done - completion for NAND transfer. + * @bam_ce_nitems - the number of elements in the @bam_ce array + * @cmd_sgl_nitems - the number of elements in the @cmd_sgl array + * @data_sgl_nitems - the number of elements in the @data_sgl array * @bam_ce_pos - the index in bam_ce which is available for next sgl * @bam_ce_start - the index in bam_ce which marks the start position ce * for current sgl. It will be used for size calculation @@ -258,6 +246,11 @@ struct bam_transaction { struct dma_async_tx_descriptor *last_data_desc; struct dma_async_tx_descriptor *last_cmd_desc; struct completion txn_done; + + unsigned int bam_ce_nitems; + unsigned int cmd_sgl_nitems; + unsigned int data_sgl_nitems; + struct_group(bam_positions, u32 bam_ce_pos; u32 bam_ce_start; @@ -454,6 +447,7 @@ struct qcom_nand_controller { struct qcom_nandc_props { u32 ecc_modes; u32 dev_cmd_reg_start; + u32 bam_offset; bool supports_bam; bool nandc_part_of_qpic; bool qpic_version2; diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 07486168d104..09c8c93e4dba 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -1136,4 +1136,9 @@ static inline bool nanddev_bbt_is_initialized(struct nand_device *nand) int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo); int nanddev_mtd_max_bad_blocks(struct mtd_info *mtd, loff_t offs, size_t len); +int nand_check_erased_ecc_chunk(void *data, int datalen, + void *ecc, int ecclen, + void *extraoob, int extraooblen, + int threshold); + #endif /* __LINUX_MTD_NAND_H */ diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index e84522e31301..d30bdc3fcfd7 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -1519,11 +1519,6 @@ int rawnand_sw_bch_correct(struct nand_chip *chip, unsigned char *buf, unsigned char *read_ecc, unsigned char *calc_ecc); void rawnand_sw_bch_cleanup(struct nand_chip *chip); -int nand_check_erased_ecc_chunk(void *data, int datalen, - void *ecc, int ecclen, - void *extraoob, int extraooblen, - int threshold); - int nand_ecc_choose_conf(struct nand_chip *chip, const struct nand_ecc_caps *caps, int oobavail); diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h index 311f145eb4e8..927c10d78769 100644 --- a/include/linux/mtd/spinand.h +++ b/include/linux/mtd/spinand.h @@ -20,174 +20,218 @@ * Standard SPI NAND flash operations */ -#define SPINAND_RESET_OP \ +#define SPINAND_RESET_1S_0_0_OP \ SPI_MEM_OP(SPI_MEM_OP_CMD(0xff, 1), \ SPI_MEM_OP_NO_ADDR, \ SPI_MEM_OP_NO_DUMMY, \ SPI_MEM_OP_NO_DATA) -#define SPINAND_WR_EN_DIS_OP(enable) \ +#define SPINAND_WR_EN_DIS_1S_0_0_OP(enable) \ SPI_MEM_OP(SPI_MEM_OP_CMD((enable) ? 0x06 : 0x04, 1), \ SPI_MEM_OP_NO_ADDR, \ SPI_MEM_OP_NO_DUMMY, \ SPI_MEM_OP_NO_DATA) -#define SPINAND_READID_OP(naddr, ndummy, buf, len) \ +#define SPINAND_READID_1S_1S_1S_OP(naddr, ndummy, buf, len) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0x9f, 1), \ SPI_MEM_OP_ADDR(naddr, 0, 1), \ SPI_MEM_OP_DUMMY(ndummy, 1), \ SPI_MEM_OP_DATA_IN(len, buf, 1)) -#define SPINAND_SET_FEATURE_OP(reg, valptr) \ +#define SPINAND_SET_FEATURE_1S_1S_1S_OP(reg, valptr) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0x1f, 1), \ SPI_MEM_OP_ADDR(1, reg, 1), \ SPI_MEM_OP_NO_DUMMY, \ SPI_MEM_OP_DATA_OUT(1, valptr, 1)) -#define SPINAND_GET_FEATURE_OP(reg, valptr) \ +#define SPINAND_GET_FEATURE_1S_1S_1S_OP(reg, valptr) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0x0f, 1), \ SPI_MEM_OP_ADDR(1, reg, 1), \ SPI_MEM_OP_NO_DUMMY, \ SPI_MEM_OP_DATA_IN(1, valptr, 1)) -#define SPINAND_BLK_ERASE_OP(addr) \ +#define SPINAND_BLK_ERASE_1S_1S_0_OP(addr) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0xd8, 1), \ SPI_MEM_OP_ADDR(3, addr, 1), \ SPI_MEM_OP_NO_DUMMY, \ SPI_MEM_OP_NO_DATA) -#define SPINAND_PAGE_READ_OP(addr) \ +#define SPINAND_PAGE_READ_1S_1S_0_OP(addr) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0x13, 1), \ SPI_MEM_OP_ADDR(3, addr, 1), \ SPI_MEM_OP_NO_DUMMY, \ SPI_MEM_OP_NO_DATA) -#define SPINAND_PAGE_READ_FROM_CACHE_OP(addr, ndummy, buf, len, ...) \ +#define SPINAND_PAGE_READ_FROM_CACHE_1S_1S_1S_OP(addr, ndummy, buf, len, freq) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0x03, 1), \ SPI_MEM_OP_ADDR(2, addr, 1), \ SPI_MEM_OP_DUMMY(ndummy, 1), \ SPI_MEM_OP_DATA_IN(len, buf, 1), \ - SPI_MEM_OP_MAX_FREQ(__VA_ARGS__ + 0)) + SPI_MEM_OP_MAX_FREQ(freq)) -#define SPINAND_PAGE_READ_FROM_CACHE_FAST_OP(addr, ndummy, buf, len) \ - SPI_MEM_OP(SPI_MEM_OP_CMD(0x0b, 1), \ - SPI_MEM_OP_ADDR(2, addr, 1), \ - SPI_MEM_OP_DUMMY(ndummy, 1), \ - SPI_MEM_OP_DATA_IN(len, buf, 1)) +#define SPINAND_PAGE_READ_FROM_CACHE_FAST_1S_1S_1S_OP(addr, ndummy, buf, len, freq) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x0b, 1), \ + SPI_MEM_OP_ADDR(2, addr, 1), \ + SPI_MEM_OP_DUMMY(ndummy, 1), \ + SPI_MEM_OP_DATA_IN(len, buf, 1), \ + SPI_MEM_OP_MAX_FREQ(freq)) -#define SPINAND_PAGE_READ_FROM_CACHE_OP_3A(addr, ndummy, buf, len) \ +#define SPINAND_PAGE_READ_FROM_CACHE_3A_1S_1S_1S_OP(addr, ndummy, buf, len, freq) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0x03, 1), \ SPI_MEM_OP_ADDR(3, addr, 1), \ SPI_MEM_OP_DUMMY(ndummy, 1), \ - SPI_MEM_OP_DATA_IN(len, buf, 1)) + SPI_MEM_OP_DATA_IN(len, buf, 1), \ + SPI_MEM_OP_MAX_FREQ(freq)) -#define SPINAND_PAGE_READ_FROM_CACHE_FAST_OP_3A(addr, ndummy, buf, len) \ +#define SPINAND_PAGE_READ_FROM_CACHE_FAST_3A_1S_1S_1S_OP(addr, ndummy, buf, len, freq) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0x0b, 1), \ SPI_MEM_OP_ADDR(3, addr, 1), \ SPI_MEM_OP_DUMMY(ndummy, 1), \ - SPI_MEM_OP_DATA_IN(len, buf, 1)) + SPI_MEM_OP_DATA_IN(len, buf, 1), \ + SPI_MEM_OP_MAX_FREQ(freq)) -#define SPINAND_PAGE_READ_FROM_CACHE_DTR_OP(addr, ndummy, buf, len, freq) \ +#define SPINAND_PAGE_READ_FROM_CACHE_1S_1D_1D_OP(addr, ndummy, buf, len, freq) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0x0d, 1), \ SPI_MEM_DTR_OP_ADDR(2, addr, 1), \ SPI_MEM_DTR_OP_DUMMY(ndummy, 1), \ SPI_MEM_DTR_OP_DATA_IN(len, buf, 1), \ SPI_MEM_OP_MAX_FREQ(freq)) -#define SPINAND_PAGE_READ_FROM_CACHE_X2_OP(addr, ndummy, buf, len) \ +#define SPINAND_PAGE_READ_FROM_CACHE_1S_1S_2S_OP(addr, ndummy, buf, len, freq) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1), \ SPI_MEM_OP_ADDR(2, addr, 1), \ SPI_MEM_OP_DUMMY(ndummy, 1), \ - SPI_MEM_OP_DATA_IN(len, buf, 2)) + SPI_MEM_OP_DATA_IN(len, buf, 2), \ + SPI_MEM_OP_MAX_FREQ(freq)) -#define SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(addr, ndummy, buf, len) \ +#define SPINAND_PAGE_READ_FROM_CACHE_3A_1S_1S_2S_OP(addr, ndummy, buf, len, freq) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1), \ SPI_MEM_OP_ADDR(3, addr, 1), \ SPI_MEM_OP_DUMMY(ndummy, 1), \ - SPI_MEM_OP_DATA_IN(len, buf, 2)) + SPI_MEM_OP_DATA_IN(len, buf, 2), \ + SPI_MEM_OP_MAX_FREQ(freq)) -#define SPINAND_PAGE_READ_FROM_CACHE_X2_DTR_OP(addr, ndummy, buf, len, freq) \ +#define SPINAND_PAGE_READ_FROM_CACHE_1S_1D_2D_OP(addr, ndummy, buf, len, freq) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0x3d, 1), \ SPI_MEM_DTR_OP_ADDR(2, addr, 1), \ SPI_MEM_DTR_OP_DUMMY(ndummy, 1), \ SPI_MEM_DTR_OP_DATA_IN(len, buf, 2), \ SPI_MEM_OP_MAX_FREQ(freq)) -#define SPINAND_PAGE_READ_FROM_CACHE_X4_OP(addr, ndummy, buf, len) \ - SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1), \ - SPI_MEM_OP_ADDR(2, addr, 1), \ - SPI_MEM_OP_DUMMY(ndummy, 1), \ - SPI_MEM_OP_DATA_IN(len, buf, 4)) - -#define SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(addr, ndummy, buf, len) \ - SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1), \ - SPI_MEM_OP_ADDR(3, addr, 1), \ - SPI_MEM_OP_DUMMY(ndummy, 1), \ - SPI_MEM_OP_DATA_IN(len, buf, 4)) - -#define SPINAND_PAGE_READ_FROM_CACHE_X4_DTR_OP(addr, ndummy, buf, len, freq) \ - SPI_MEM_OP(SPI_MEM_OP_CMD(0x6d, 1), \ - SPI_MEM_DTR_OP_ADDR(2, addr, 1), \ - SPI_MEM_DTR_OP_DUMMY(ndummy, 1), \ - SPI_MEM_DTR_OP_DATA_IN(len, buf, 4), \ - SPI_MEM_OP_MAX_FREQ(freq)) - -#define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(addr, ndummy, buf, len) \ +#define SPINAND_PAGE_READ_FROM_CACHE_1S_2S_2S_OP(addr, ndummy, buf, len, freq) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1), \ SPI_MEM_OP_ADDR(2, addr, 2), \ SPI_MEM_OP_DUMMY(ndummy, 2), \ - SPI_MEM_OP_DATA_IN(len, buf, 2)) + SPI_MEM_OP_DATA_IN(len, buf, 2), \ + SPI_MEM_OP_MAX_FREQ(freq)) -#define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP_3A(addr, ndummy, buf, len) \ +#define SPINAND_PAGE_READ_FROM_CACHE_3A_1S_2S_2S_OP(addr, ndummy, buf, len, freq) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1), \ SPI_MEM_OP_ADDR(3, addr, 2), \ SPI_MEM_OP_DUMMY(ndummy, 2), \ - SPI_MEM_OP_DATA_IN(len, buf, 2)) + SPI_MEM_OP_DATA_IN(len, buf, 2), \ + SPI_MEM_OP_MAX_FREQ(freq)) -#define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_DTR_OP(addr, ndummy, buf, len, freq) \ +#define SPINAND_PAGE_READ_FROM_CACHE_1S_2D_2D_OP(addr, ndummy, buf, len, freq) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0xbd, 1), \ SPI_MEM_DTR_OP_ADDR(2, addr, 2), \ SPI_MEM_DTR_OP_DUMMY(ndummy, 2), \ SPI_MEM_DTR_OP_DATA_IN(len, buf, 2), \ SPI_MEM_OP_MAX_FREQ(freq)) -#define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(addr, ndummy, buf, len) \ +#define SPINAND_PAGE_READ_FROM_CACHE_1S_1S_4S_OP(addr, ndummy, buf, len, freq) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1), \ + SPI_MEM_OP_ADDR(2, addr, 1), \ + SPI_MEM_OP_DUMMY(ndummy, 1), \ + SPI_MEM_OP_DATA_IN(len, buf, 4), \ + SPI_MEM_OP_MAX_FREQ(freq)) + +#define SPINAND_PAGE_READ_FROM_CACHE_3A_1S_1S_4S_OP(addr, ndummy, buf, len, freq) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1), \ + SPI_MEM_OP_ADDR(3, addr, 1), \ + SPI_MEM_OP_DUMMY(ndummy, 1), \ + SPI_MEM_OP_DATA_IN(len, buf, 4), \ + SPI_MEM_OP_MAX_FREQ(freq)) + +#define SPINAND_PAGE_READ_FROM_CACHE_1S_1D_4D_OP(addr, ndummy, buf, len, freq) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x6d, 1), \ + SPI_MEM_DTR_OP_ADDR(2, addr, 1), \ + SPI_MEM_DTR_OP_DUMMY(ndummy, 1), \ + SPI_MEM_DTR_OP_DATA_IN(len, buf, 4), \ + SPI_MEM_OP_MAX_FREQ(freq)) + +#define SPINAND_PAGE_READ_FROM_CACHE_1S_4S_4S_OP(addr, ndummy, buf, len, freq) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1), \ SPI_MEM_OP_ADDR(2, addr, 4), \ SPI_MEM_OP_DUMMY(ndummy, 4), \ - SPI_MEM_OP_DATA_IN(len, buf, 4)) + SPI_MEM_OP_DATA_IN(len, buf, 4), \ + SPI_MEM_OP_MAX_FREQ(freq)) -#define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP_3A(addr, ndummy, buf, len) \ +#define SPINAND_PAGE_READ_FROM_CACHE_3A_1S_4S_4S_OP(addr, ndummy, buf, len, freq) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1), \ SPI_MEM_OP_ADDR(3, addr, 4), \ SPI_MEM_OP_DUMMY(ndummy, 4), \ - SPI_MEM_OP_DATA_IN(len, buf, 4)) + SPI_MEM_OP_DATA_IN(len, buf, 4), \ + SPI_MEM_OP_MAX_FREQ(freq)) -#define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_DTR_OP(addr, ndummy, buf, len, freq) \ +#define SPINAND_PAGE_READ_FROM_CACHE_1S_4D_4D_OP(addr, ndummy, buf, len, freq) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0xed, 1), \ SPI_MEM_DTR_OP_ADDR(2, addr, 4), \ SPI_MEM_DTR_OP_DUMMY(ndummy, 4), \ SPI_MEM_DTR_OP_DATA_IN(len, buf, 4), \ SPI_MEM_OP_MAX_FREQ(freq)) -#define SPINAND_PROG_EXEC_OP(addr) \ +#define SPINAND_PAGE_READ_FROM_CACHE_1S_1S_8S_OP(addr, ndummy, buf, len, freq) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x8b, 1), \ + SPI_MEM_OP_ADDR(2, addr, 1), \ + SPI_MEM_OP_DUMMY(ndummy, 1), \ + SPI_MEM_OP_DATA_IN(len, buf, 8), \ + SPI_MEM_OP_MAX_FREQ(freq)) + +#define SPINAND_PAGE_READ_FROM_CACHE_1S_8S_8S_OP(addr, ndummy, buf, len, freq) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0xcb, 1), \ + SPI_MEM_OP_ADDR(2, addr, 8), \ + SPI_MEM_OP_DUMMY(ndummy, 8), \ + SPI_MEM_OP_DATA_IN(len, buf, 8), \ + SPI_MEM_OP_MAX_FREQ(freq)) + +#define SPINAND_PAGE_READ_FROM_CACHE_1S_1D_8D_OP(addr, ndummy, buf, len, freq) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x9d, 1), \ + SPI_MEM_DTR_OP_ADDR(2, addr, 1), \ + SPI_MEM_DTR_OP_DUMMY(ndummy, 1), \ + SPI_MEM_DTR_OP_DATA_IN(len, buf, 8), \ + SPI_MEM_OP_MAX_FREQ(freq)) + +#define SPINAND_PROG_EXEC_1S_1S_0_OP(addr) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1), \ SPI_MEM_OP_ADDR(3, addr, 1), \ SPI_MEM_OP_NO_DUMMY, \ SPI_MEM_OP_NO_DATA) -#define SPINAND_PROG_LOAD(reset, addr, buf, len) \ +#define SPINAND_PROG_LOAD_1S_1S_1S_OP(reset, addr, buf, len) \ SPI_MEM_OP(SPI_MEM_OP_CMD(reset ? 0x02 : 0x84, 1), \ SPI_MEM_OP_ADDR(2, addr, 1), \ SPI_MEM_OP_NO_DUMMY, \ SPI_MEM_OP_DATA_OUT(len, buf, 1)) -#define SPINAND_PROG_LOAD_X4(reset, addr, buf, len) \ +#define SPINAND_PROG_LOAD_1S_1S_4S_OP(reset, addr, buf, len) \ SPI_MEM_OP(SPI_MEM_OP_CMD(reset ? 0x32 : 0x34, 1), \ SPI_MEM_OP_ADDR(2, addr, 1), \ SPI_MEM_OP_NO_DUMMY, \ SPI_MEM_OP_DATA_OUT(len, buf, 4)) +#define SPINAND_PROG_LOAD_1S_1S_8S_OP(addr, buf, len) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x82, 1), \ + SPI_MEM_OP_ADDR(2, addr, 1), \ + SPI_MEM_OP_NO_DUMMY, \ + SPI_MEM_OP_DATA_OUT(len, buf, 8)) + +#define SPINAND_PROG_LOAD_1S_8S_8S_OP(reset, addr, buf, len) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(reset ? 0xc2 : 0xc4, 1), \ + SPI_MEM_OP_ADDR(2, addr, 8), \ + SPI_MEM_OP_NO_DUMMY, \ + SPI_MEM_OP_DATA_OUT(len, buf, 8)) + /** * Standard SPI NAND flash commands */ @@ -311,6 +355,7 @@ struct spinand_manufacturer { extern const struct spinand_manufacturer alliancememory_spinand_manufacturer; extern const struct spinand_manufacturer ato_spinand_manufacturer; extern const struct spinand_manufacturer esmt_c8_spinand_manufacturer; +extern const struct spinand_manufacturer fmsh_spinand_manufacturer; extern const struct spinand_manufacturer foresee_spinand_manufacturer; extern const struct spinand_manufacturer gigadevice_spinand_manufacturer; extern const struct spinand_manufacturer macronix_spinand_manufacturer; @@ -449,6 +494,7 @@ struct spinand_user_otp { * @op_variants.update_cache: variants of the update-cache operation * @select_target: function used to select a target/die. Required only for * multi-die chips + * @configure_chip: Align the chip configuration with the core settings * @set_cont_read: enable/disable continuous cached reads * @fact_otp: SPI NAND factory OTP info. * @user_otp: SPI NAND user OTP info. @@ -472,6 +518,7 @@ struct spinand_info { } op_variants; int (*select_target)(struct spinand_device *spinand, unsigned int target); + int (*configure_chip)(struct spinand_device *spinand); int (*set_cont_read)(struct spinand_device *spinand, bool enable); struct spinand_fact_otp fact_otp; @@ -504,6 +551,9 @@ struct spinand_info { #define SPINAND_SELECT_TARGET(__func) \ .select_target = __func +#define SPINAND_CONFIGURE_CHIP(__configure_chip) \ + .configure_chip = __configure_chip + #define SPINAND_CONT_READ(__set_cont_read) \ .set_cont_read = __set_cont_read @@ -572,6 +622,7 @@ struct spinand_dirmap { * passed in spi_mem_op be DMA-able, so we can't based the bufs on * the stack * @manufacturer: SPI NAND manufacturer information + * @configure_chip: Align the chip configuration with the core settings * @cont_read_possible: Field filled by the core once the whole system * configuration is known to tell whether continuous reads are * suitable to use or not in general with this chip/configuration. @@ -612,6 +663,7 @@ struct spinand_device { const struct spinand_manufacturer *manufacturer; void *priv; + int (*configure_chip)(struct spinand_device *spinand); bool cont_read_possible; int (*set_cont_read)(struct spinand_device *spinand, bool enable); @@ -688,7 +740,9 @@ int spinand_match_and_init(struct spinand_device *spinand, enum spinand_readid_method rdid_method); int spinand_upd_cfg(struct spinand_device *spinand, u8 mask, u8 val); +int spinand_read_reg_op(struct spinand_device *spinand, u8 reg, u8 *val); int spinand_write_reg_op(struct spinand_device *spinand, u8 reg, u8 val); +int spinand_write_enable_op(struct spinand_device *spinand); int spinand_select_target(struct spinand_device *spinand, unsigned int target); int spinand_wait(struct spinand_device *spinand, unsigned long initial_delay_us, diff --git a/include/linux/mtd/ubi.h b/include/linux/mtd/ubi.h index 562f92504f2b..c3f79c4be1cc 100644 --- a/include/linux/mtd/ubi.h +++ b/include/linux/mtd/ubi.h @@ -250,7 +250,6 @@ int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum); int ubi_leb_map(struct ubi_volume_desc *desc, int lnum); int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum); int ubi_sync(int ubi_num); -int ubi_flush(int ubi_num, int vol_id, int lnum); /* * This function is the same as the 'ubi_leb_read()' function, but it does not |