diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/cpuidle/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/cpuidle/governors/Makefile | 1 | ||||
| -rw-r--r-- | drivers/cpuidle/governors/teo.c | 444 |
3 files changed, 455 insertions, 1 deletions
diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig index 7e48eb5bf0a7..8caccbbd7353 100644 --- a/drivers/cpuidle/Kconfig +++ b/drivers/cpuidle/Kconfig @@ -4,7 +4,7 @@ config CPU_IDLE bool "CPU idle PM support" default y if ACPI || PPC_PSERIES select CPU_IDLE_GOV_LADDER if (!NO_HZ && !NO_HZ_IDLE) - select CPU_IDLE_GOV_MENU if (NO_HZ || NO_HZ_IDLE) + select CPU_IDLE_GOV_MENU if (NO_HZ || NO_HZ_IDLE) && !CPU_IDLE_GOV_TEO help CPU idle is a generic framework for supporting software-controlled idle processor power management. It includes modular cross-platform @@ -23,6 +23,15 @@ config CPU_IDLE_GOV_LADDER config CPU_IDLE_GOV_MENU bool "Menu governor (for tickless system)" +config CPU_IDLE_GOV_TEO + bool "Timer events oriented (TEO) governor (for tickless systems)" + help + This governor implements a simplified idle state selection method + focused on timer events and does not do any interactivity boosting. + + Some workloads benefit from using it and it generally should be safe + to use. Say Y here if you are not happy with the alternatives. + config DT_IDLE_STATES bool diff --git a/drivers/cpuidle/governors/Makefile b/drivers/cpuidle/governors/Makefile index 1b512722689f..4d8aff5248a8 100644 --- a/drivers/cpuidle/governors/Makefile +++ b/drivers/cpuidle/governors/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_CPU_IDLE_GOV_LADDER) += ladder.o obj-$(CONFIG_CPU_IDLE_GOV_MENU) += menu.o +obj-$(CONFIG_CPU_IDLE_GOV_TEO) += teo.o diff --git a/drivers/cpuidle/governors/teo.c b/drivers/cpuidle/governors/teo.c new file mode 100644 index 000000000000..7d05efdbd3c6 --- /dev/null +++ b/drivers/cpuidle/governors/teo.c @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Timer events oriented CPU idle governor + * + * Copyright (C) 2018 Intel Corporation + * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> + * + * The idea of this governor is based on the observation that on many systems + * timer events are two or more orders of magnitude more frequent than any + * other interrupts, so they are likely to be the most significant source of CPU + * wakeups from idle states. Moreover, information about what happened in the + * (relatively recent) past can be used to estimate whether or not the deepest + * idle state with target residency within the time to the closest timer is + * likely to be suitable for the upcoming idle time of the CPU and, if not, then + * which of the shallower idle states to choose. + * + * Of course, non-timer wakeup sources are more important in some use cases and + * they can be covered by taking a few most recent idle time intervals of the + * CPU into account. However, even in that case it is not necessary to consider + * idle duration values greater than the time till the closest timer, as the + * patterns that they may belong to produce average values close enough to + * the time till the closest timer (sleep length) anyway. + * + * Thus this governor estimates whether or not the upcoming idle time of the CPU + * is likely to be significantly shorter than the sleep length and selects an + * idle state for it in accordance with that, as follows: + * + * - Find an idle state on the basis of the sleep length and state statistics + * collected over time: + * + * o Find the deepest idle state whose target residency is less than or equal + * to the sleep length. + * + * o Select it if it matched both the sleep length and the observed idle + * duration in the past more often than it matched the sleep length alone + * (i.e. the observed idle duration was significantly shorter than the sleep + * length matched by it). + * + * o Otherwise, select the shallower state with the greatest matched "early" + * wakeups metric. + * + * - If the majority of the most recent idle duration values are below the + * target residency of the idle state selected so far, use those values to + * compute the new expected idle duration and find an idle state matching it + * (which has to be shallower than the one selected so far). + */ + +#include <linux/cpuidle.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/sched/clock.h> +#include <linux/tick.h> + +/* + * The PULSE value is added to metrics when they grow and the DECAY_SHIFT value + * is used for decreasing metrics on a regular basis. + */ +#define PULSE 1024 +#define DECAY_SHIFT 3 + +/* + * Number of the most recent idle duration values to take into consideration for + * the detection of wakeup patterns. + */ +#define INTERVALS 8 + +/** + * struct teo_idle_state - Idle state data used by the TEO cpuidle governor. + * @early_hits: "Early" CPU wakeups "matching" this state. + * @hits: "On time" CPU wakeups "matching" this state. + * @misses: CPU wakeups "missing" this state. + * + * A CPU wakeup is "matched" by a given idle state if the idle duration measured + * after the wakeup is between the target residency of that state and the target + * residency of the next one (or if this is the deepest available idle state, it + * "matches" a CPU wakeup when the measured idle duration is at least equal to + * its target residency). + * + * Also, from the TEO governor perspective, a CPU wakeup from idle is "early" if + * it occurs significantly earlier than the closest expected timer event (that + * is, early enough to match an idle state shallower than the one matching the + * time till the closest timer event). Otherwise, the wakeup is "on time", or + * it is a "hit". + * + * A "miss" occurs when the given state doesn't match the wakeup, but it matches + * the time till the closest timer event used for idle state selection. + */ +struct teo_idle_state { + unsigned int early_hits; + unsigned int hits; + unsigned int misses; +}; + +/** + * struct teo_cpu - CPU data used by the TEO cpuidle governor. + * @time_span_ns: Time between idle state selection and post-wakeup update. + * @sleep_length_ns: Time till the closest timer event (at the selection time). + * @states: Idle states data corresponding to this CPU. + * @last_state: Idle state entered by the CPU last time. + * @interval_idx: Index of the most recent saved idle interval. + * @intervals: Saved idle duration values. + */ +struct teo_cpu { + u64 time_span_ns; + u64 sleep_length_ns; + struct teo_idle_state states[CPUIDLE_STATE_MAX]; + int last_state; + int interval_idx; + unsigned int intervals[INTERVALS]; +}; + +static DEFINE_PER_CPU(struct teo_cpu, teo_cpus); + +/** + * teo_update - Update CPU data after wakeup. + * @drv: cpuidle driver containing state data. + * @dev: Target CPU. + */ +static void teo_update(struct cpuidle_driver *drv, struct cpuidle_device *dev) +{ + struct teo_cpu *cpu_data = per_cpu_ptr(&teo_cpus, dev->cpu); + unsigned int sleep_length_us = ktime_to_us(cpu_data->sleep_length_ns); + int i, idx_hit = -1, idx_timer = -1; + unsigned int measured_us; + + if (cpu_data->time_span_ns >= cpu_data->sleep_length_ns) { + /* + * One of the safety nets has triggered or this was a timer + * wakeup (or equivalent). + */ + measured_us = sleep_length_us; + } else { + unsigned int lat = drv->states[cpu_data->last_state].exit_latency; + + measured_us = ktime_to_us(cpu_data->time_span_ns); + /* + * The delay between the wakeup and the first instruction + * executed by the CPU is not likely to be worst-case every + * time, so take 1/2 of the exit latency as a very rough + * approximation of the average of it. + */ + if (measured_us >= lat) + measured_us -= lat / 2; + else + measured_us /= 2; + } + + /* + * Decay the "early hits" metric for all of the states and find the + * states matching the sleep length and the measured idle duration. + */ + for (i = 0; i < drv->state_count; i++) { + unsigned int early_hits = cpu_data->states[i].early_hits; + + cpu_data->states[i].early_hits -= early_hits >> DECAY_SHIFT; + + if (drv->states[i].target_residency <= sleep_length_us) { + idx_timer = i; + if (drv->states[i].target_residency <= measured_us) + idx_hit = i; + } + } + + /* + * Update the "hits" and "misses" data for the state matching the sleep + * length. If it matches the measured idle duration too, this is a hit, + * so increase the "hits" metric for it then. Otherwise, this is a + * miss, so increase the "misses" metric for it. In the latter case + * also increase the "early hits" metric for the state that actually + * matches the measured idle duration. + */ + if (idx_timer >= 0) { + unsigned int hits = cpu_data->states[idx_timer].hits; + unsigned int misses = cpu_data->states[idx_timer].misses; + + hits -= hits >> DECAY_SHIFT; + misses -= misses >> DECAY_SHIFT; + + if (idx_timer > idx_hit) { + misses += PULSE; + if (idx_hit >= 0) + cpu_data->states[idx_hit].early_hits += PULSE; + } else { + hits += PULSE; + } + + cpu_data->states[idx_timer].misses = misses; + cpu_data->states[idx_timer].hits = hits; + } + + /* + * If the total time span between idle state selection and the "reflect" + * callback is greater than or equal to the sleep length determined at + * the idle state selection time, the wakeup is likely to be due to a + * timer event. + */ + if (cpu_data->time_span_ns >= cpu_data->sleep_length_ns) + measured_us = UINT_MAX; + + /* + * Save idle duration values corresponding to non-timer wakeups for + * pattern detection. + */ + cpu_data->intervals[cpu_data->interval_idx++] = measured_us; + if (cpu_data->interval_idx > INTERVALS) + cpu_data->interval_idx = 0; +} + +/** + * teo_find_shallower_state - Find shallower idle state matching given duration. + * @drv: cpuidle driver containing state data. + * @dev: Target CPU. + * @state_idx: Index of the capping idle state. + * @duration_us: Idle duration value to match. + */ +static int teo_find_shallower_state(struct cpuidle_driver *drv, + struct cpuidle_device *dev, int state_idx, + unsigned int duration_us) +{ + int i; + + for (i = state_idx - 1; i >= 0; i--) { + if (drv->states[i].disabled || dev->states_usage[i].disable) + continue; + + state_idx = i; + if (drv->states[i].target_residency <= duration_us) + break; + } + return state_idx; +} + +/** + * teo_select - Selects the next idle state to enter. + * @drv: cpuidle driver containing state data. + * @dev: Target CPU. + * @stop_tick: Indication on whether or not to stop the scheduler tick. + */ +static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev, + bool *stop_tick) +{ + struct teo_cpu *cpu_data = per_cpu_ptr(&teo_cpus, dev->cpu); + int latency_req = cpuidle_governor_latency_req(dev->cpu); + unsigned int duration_us, count; + int max_early_idx, idx, i; + ktime_t delta_tick; + + if (cpu_data->last_state >= 0) { + teo_update(drv, dev); + cpu_data->last_state = -1; + } + + cpu_data->time_span_ns = local_clock(); + + cpu_data->sleep_length_ns = tick_nohz_get_sleep_length(&delta_tick); + duration_us = ktime_to_us(cpu_data->sleep_length_ns); + + count = 0; + max_early_idx = -1; + idx = -1; + + for (i = 0; i < drv->state_count; i++) { + struct cpuidle_state *s = &drv->states[i]; + struct cpuidle_state_usage *su = &dev->states_usage[i]; + + if (s->disabled || su->disable) { + /* + * If the "early hits" metric of a disabled state is + * greater than the current maximum, it should be taken + * into account, because it would be a mistake to select + * a deeper state with lower "early hits" metric. The + * index cannot be changed to point to it, however, so + * just increase the max count alone and let the index + * still point to a shallower idle state. + */ + if (max_early_idx >= 0 && + count < cpu_data->states[i].early_hits) + count = cpu_data->states[i].early_hits; + + continue; + } + + if (idx < 0) + idx = i; /* first enabled state */ + + if (s->target_residency > duration_us) + break; + + if (s->exit_latency > latency_req) { + /* + * If we break out of the loop for latency reasons, use + * the target residency of the selected state as the + * expected idle duration to avoid stopping the tick + * as long as that target residency is low enough. + */ + duration_us = drv->states[idx].target_residency; + goto refine; + } + + idx = i; + + if (count < cpu_data->states[i].early_hits && + !(tick_nohz_tick_stopped() && + drv->states[i].target_residency < TICK_USEC)) { + count = cpu_data->states[i].early_hits; + max_early_idx = i; + } + } + + /* + * If the "hits" metric of the idle state matching the sleep length is + * greater than its "misses" metric, that is the one to use. Otherwise, + * it is more likely that one of the shallower states will match the + * idle duration observed after wakeup, so take the one with the maximum + * "early hits" metric, but if that cannot be determined, just use the + * state selected so far. + */ + if (cpu_data->states[idx].hits <= cpu_data->states[idx].misses && + max_early_idx >= 0) { + idx = max_early_idx; + duration_us = drv->states[idx].target_residency; + } + +refine: + if (idx < 0) { + idx = 0; /* No states enabled. Must use 0. */ + } else if (idx > 0) { + u64 sum = 0; + + count = 0; + + /* + * Count and sum the most recent idle duration values less than + * the target residency of the state selected so far, find the + * max. + */ + for (i = 0; i < INTERVALS; i++) { + unsigned int val = cpu_data->intervals[i]; + + if (val >= drv->states[idx].target_residency) + continue; + + count++; + sum += val; + } + + /* + * Give up unless the majority of the most recent idle duration + * values are in the interesting range. + */ + if (count > INTERVALS / 2) { + unsigned int avg_us = div64_u64(sum, count); + + /* + * Avoid spending too much time in an idle state that + * would be too shallow. + */ + if (!(tick_nohz_tick_stopped() && avg_us < TICK_USEC)) { + idx = teo_find_shallower_state(drv, dev, idx, avg_us); + duration_us = avg_us; + } + } + } + + /* + * Don't stop the tick if the selected state is a polling one or if the + * expected idle duration is shorter than the tick period length. + */ + if (((drv->states[idx].flags & CPUIDLE_FLAG_POLLING) || + duration_us < TICK_USEC) && !tick_nohz_tick_stopped()) { + unsigned int delta_tick_us = ktime_to_us(delta_tick); + + *stop_tick = false; + + /* + * The tick is not going to be stopped, so if the target + * residency of the state to be returned is not within the time + * till the closest timer including the tick, try to correct + * that. + */ + if (idx > 0 && drv->states[idx].target_residency > delta_tick_us) + idx = teo_find_shallower_state(drv, dev, idx, delta_tick_us); + } + + return idx; +} + +/** + * teo_reflect - Note that governor data for the CPU need to be updated. + * @dev: Target CPU. + * @state: Entered state. + */ +static void teo_reflect(struct cpuidle_device *dev, int state) +{ + struct teo_cpu *cpu_data = per_cpu_ptr(&teo_cpus, dev->cpu); + + cpu_data->last_state = state; + /* + * If the wakeup was not "natural", but triggered by one of the safety + * nets, assume that the CPU might have been idle for the entire sleep + * length time. + */ + if (dev->poll_time_limit || + (tick_nohz_idle_got_tick() && cpu_data->sleep_length_ns > TICK_NSEC)) { + dev->poll_time_limit = false; + cpu_data->time_span_ns = cpu_data->sleep_length_ns; + } else { + cpu_data->time_span_ns = local_clock() - cpu_data->time_span_ns; + } +} + +/** + * teo_enable_device - Initialize the governor's data for the target CPU. + * @drv: cpuidle driver (not used). + * @dev: Target CPU. + */ +static int teo_enable_device(struct cpuidle_driver *drv, + struct cpuidle_device *dev) +{ + struct teo_cpu *cpu_data = per_cpu_ptr(&teo_cpus, dev->cpu); + int i; + + memset(cpu_data, 0, sizeof(*cpu_data)); + + for (i = 0; i < INTERVALS; i++) + cpu_data->intervals[i] = UINT_MAX; + + return 0; +} + +static struct cpuidle_governor teo_governor = { + .name = "teo", + .rating = 19, + .enable = teo_enable_device, + .select = teo_select, + .reflect = teo_reflect, +}; + +static int __init teo_governor_init(void) +{ + return cpuidle_register_governor(&teo_governor); +} + +postcore_initcall(teo_governor_init); |