diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/calib.c | 38 |
1 files changed, 32 insertions, 6 deletions
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c index 3e2e24e4843f..37f6d66d1671 100644 --- a/drivers/net/wireless/ath/ath9k/calib.c +++ b/drivers/net/wireless/ath/ath9k/calib.c @@ -241,6 +241,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask; struct ath_common *common = ath9k_hw_common(ah); s16 default_nf = ath9k_hw_get_default_nf(ah, chan); + u32 bb_agc_ctl = REG_READ(ah, AR_PHY_AGC_CONTROL); if (ah->caldata) h = ah->caldata->nfCalHist; @@ -264,6 +265,16 @@ int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) } /* + * stop NF cal if ongoing to ensure NF load completes immediately + * (or after end rx/tx frame if ongoing) + */ + if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) { + REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); + REG_RMW_BUFFER_FLUSH(ah); + ENABLE_REG_RMW_BUFFER(ah); + } + + /* * Load software filtered NF value into baseband internal minCCApwr * variable. */ @@ -276,18 +287,33 @@ int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) /* * Wait for load to complete, should be fast, a few 10s of us. - * The max delay was changed from an original 250us to 10000us - * since 250us often results in NF load timeout and causes deaf - * condition during stress testing 12/12/2009 + * The max delay was changed from an original 250us to 22.2 msec. + * This would increase timeout to the longest possible frame + * (11n max length 22.1 msec) */ - for (j = 0; j < 10000; j++) { + for (j = 0; j < 22200; j++) { if ((REG_READ(ah, AR_PHY_AGC_CONTROL) & - AR_PHY_AGC_CONTROL_NF) == 0) + AR_PHY_AGC_CONTROL_NF) == 0) break; udelay(10); } /* + * Restart NF so it can continue. + */ + if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) { + ENABLE_REG_RMW_BUFFER(ah); + if (bb_agc_ctl & AR_PHY_AGC_CONTROL_ENABLE_NF) + REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_ENABLE_NF); + if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NO_UPDATE_NF) + REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_NO_UPDATE_NF); + REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); + REG_RMW_BUFFER_FLUSH(ah); + } + + /* * We timed out waiting for the noisefloor to load, probably due to an * in-progress rx. Simply return here and allow the load plenty of time * to complete before the next calibration interval. We need to avoid @@ -296,7 +322,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) * here, the baseband nf cal will just be capped by our present * noisefloor until the next calibration timer. */ - if (j == 10000) { + if (j == 22200) { ath_dbg(common, ANY, "Timeout while waiting for nf to load: AR_PHY_AGC_CONTROL=0x%x\n", REG_READ(ah, AR_PHY_AGC_CONTROL)); |