diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/bluetooth/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/bluetooth/Makefile | 1 | ||||
| -rw-r--r-- | drivers/bluetooth/btmrvl_sdio.c | 1128 | ||||
| -rw-r--r-- | drivers/bluetooth/btmrvl_sdio.h | 113 |
4 files changed, 1255 insertions, 0 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index b049a79fcc02..8c89bd4abbf6 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -182,5 +182,18 @@ config BT_MRVL Say Y here to compile Marvell Bluetooth driver into the kernel or say M to compile it as module. +config BT_MRVL_SDIO + tristate "Marvell BT-over-SDIO driver" + depends on BT_MRVL && MMC + help + The driver for Marvell Bluetooth chipsets with SDIO interface. + + This driver is required if you want to use Marvell Bluetooth + devices with SDIO interface. Currently only SD8688 chipset is + supported. + + Say Y here to compile support for Marvell BT-over-SDIO driver + into the kernel or say M to compile it as module. + endmenu diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index 3eff1231812c..2dc12e7d0155 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_BT_HCIBTSDIO) += btsdio.o btmrvl-objs := btmrvl_main.o obj-$(CONFIG_BT_MRVL) += btmrvl.o +obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o hci_uart-y := hci_ldisc.o hci_uart-$(CONFIG_BT_HCIUART_H4) += hci_h4.o diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c new file mode 100644 index 000000000000..8f13e7bea0ba --- /dev/null +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -0,0 +1,1128 @@ +/** + * Marvell BT-over-SDIO driver: SDIO interface related functions. + * + * Copyright (C) 2009, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + **/ + +#include <linux/firmware.h> + +#include <linux/mmc/sdio_ids.h> +#include <linux/mmc/sdio_func.h> + +#include <net/bluetooth/bluetooth.h> +#include <net/bluetooth/hci_core.h> + +#include "btmrvl_drv.h" +#include "btmrvl_sdio.h" + +#define VERSION "1.0" + +#ifndef SDIO_DEVICE_ID_MARVELL_8688BT +#define SDIO_DEVICE_ID_MARVELL_8688BT 0x9105 +#endif + +/* The btmrvl_sdio_remove() callback function is called + * when user removes this module from kernel space or ejects + * the card from the slot. The driver handles these 2 cases + * differently. + * If the user is removing the module, a MODULE_SHUTDOWN_REQ + * command is sent to firmware and interrupt will be disabled. + * If the card is removed, there is no need to send command + * or disable interrupt. + * + * The variable 'user_rmmod' is used to distinguish these two + * scenarios. This flag is initialized as FALSE in case the card + * is removed, and will be set to TRUE for module removal when + * module_exit function is called. + */ +static u8 user_rmmod; + +static const struct sdio_device_id btmrvl_sdio_ids[] = { + {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8688BT)}, + {0, 0, 0, 0} +}; + +MODULE_DEVICE_TABLE(sdio, btmrvl_sdio_ids); + +static struct btmrvl_sdio_device btmrvl_sdio_devices[] = { + { + .dev_id = SDIO_DEVICE_ID_MARVELL_8688BT, + .helper = "sd8688_helper.bin", + .firmware = "sd8688.bin", + }, +}; + +static int btmrvl_sdio_get_rx_unit(struct btmrvl_sdio_card *card) +{ + u8 reg; + int ret; + + BT_DBG("Enter"); + + reg = sdio_readb(card->func, CARD_RX_UNIT_REG, &ret); + if (!ret) + card->rx_unit = reg; + + BT_DBG("Leave"); + + return ret; +} + +static int btmrvl_sdio_read_fw_status(struct btmrvl_sdio_card *card, u16 *dat) +{ + int ret; + u8 fws0, fws1; + + BT_DBG("Enter"); + + *dat = 0; + + fws0 = sdio_readb(card->func, CARD_FW_STATUS0_REG, &ret); + + if (!ret) + fws1 = sdio_readb(card->func, CARD_FW_STATUS1_REG, &ret); + + if (ret) { + BT_DBG("Leave"); + return -EIO; + } + + *dat = (((u16) fws1) << 8) | fws0; + + BT_DBG("Leave"); + + return 0; +} + +static int btmrvl_sdio_read_rx_len(struct btmrvl_sdio_card *card, u16 *dat) +{ + int ret; + u8 reg; + + BT_DBG("Enter"); + + reg = sdio_readb(card->func, CARD_RX_LEN_REG, &ret); + if (!ret) + *dat = (u16) reg << card->rx_unit; + + BT_DBG("Leave"); + + return ret; +} + +static int btmrvl_sdio_enable_host_int_mask(struct btmrvl_sdio_card *card, + u8 mask) +{ + int ret; + + BT_DBG("Enter"); + + sdio_writeb(card->func, mask, HOST_INT_MASK_REG, &ret); + if (ret) { + BT_ERR("Unable to enable the host interrupt!"); + ret = -EIO; + } + + BT_DBG("Leave"); + + return ret; +} + +static int btmrvl_sdio_disable_host_int_mask(struct btmrvl_sdio_card *card, + u8 mask) +{ + int ret; + u8 host_int_mask; + + BT_DBG("Enter"); + + host_int_mask = sdio_readb(card->func, HOST_INT_MASK_REG, &ret); + if (ret) { + ret = -EIO; + goto done; + } + + host_int_mask &= ~mask; + + sdio_writeb(card->func, host_int_mask, HOST_INT_MASK_REG, &ret); + if (ret < 0) { + BT_ERR("Unable to disable the host interrupt!"); + ret = -EIO; + goto done; + } + + ret = 0; + +done: + BT_DBG("Leave"); + + return ret; +} + +static int btmrvl_sdio_poll_card_status(struct btmrvl_sdio_card *card, u8 bits) +{ + unsigned int tries; + int ret; + u8 status; + + BT_DBG("Enter"); + + for (tries = 0; tries < MAX_POLL_TRIES * 1000; tries++) { + status = sdio_readb(card->func, CARD_STATUS_REG, &ret); + if (ret) + goto failed; + if ((status & bits) == bits) + goto done; + + udelay(1); + } + + ret = -ETIMEDOUT; + +failed: + BT_ERR("FAILED! ret=%d", ret); + +done: + BT_DBG("Leave"); + + return ret; +} + +static int btmrvl_sdio_verify_fw_download(struct btmrvl_sdio_card *card, + int pollnum) +{ + int ret = -ETIMEDOUT; + u16 firmwarestat; + unsigned int tries; + + BT_DBG("Enter"); + + /* Wait for firmware to become ready */ + for (tries = 0; tries < pollnum; tries++) { + if (btmrvl_sdio_read_fw_status(card, &firmwarestat) < 0) + continue; + + if (firmwarestat == FIRMWARE_READY) { + ret = 0; + break; + } else { + msleep(10); + } + } + + BT_DBG("Leave"); + + return ret; +} + +static int btmrvl_sdio_download_helper(struct btmrvl_sdio_card *card) +{ + const struct firmware *fw_helper = NULL; + const u8 *helper = NULL; + int ret; + void *tmphlprbuf = NULL; + int tmphlprbufsz, hlprblknow, helperlen; + u8 *helperbuf; + u32 tx_len; + + BT_DBG("Enter"); + + ret = request_firmware(&fw_helper, card->helper, + &card->func->dev); + if ((ret < 0) || !fw_helper) { + BT_ERR("request_firmware(helper) failed, error code = %d", + ret); + ret = -ENOENT; + goto done; + } + + helper = fw_helper->data; + helperlen = fw_helper->size; + + BT_DBG("Downloading helper image (%d bytes), block size %d bytes", + helperlen, SDIO_BLOCK_SIZE); + + tmphlprbufsz = ALIGN_SZ(BTM_UPLD_SIZE, BTSDIO_DMA_ALIGN); + + tmphlprbuf = kmalloc(tmphlprbufsz, GFP_KERNEL); + if (!tmphlprbuf) { + BT_ERR("Unable to allocate buffer for helper." + " Terminating download"); + ret = -ENOMEM; + goto done; + } + + memset(tmphlprbuf, 0, tmphlprbufsz); + + helperbuf = (u8 *) ALIGN_ADDR(tmphlprbuf, BTSDIO_DMA_ALIGN); + + /* Perform helper data transfer */ + tx_len = (FIRMWARE_TRANSFER_NBLOCK * SDIO_BLOCK_SIZE) + - SDIO_HEADER_LEN; + hlprblknow = 0; + + do { + ret = btmrvl_sdio_poll_card_status(card, + CARD_IO_READY | DN_LD_CARD_RDY); + if (ret < 0) { + BT_ERR("Helper download poll status timeout @ %d", + hlprblknow); + goto done; + } + + /* Check if there is more data? */ + if (hlprblknow >= helperlen) + break; + + if (helperlen - hlprblknow < tx_len) + tx_len = helperlen - hlprblknow; + + /* Little-endian */ + helperbuf[0] = ((tx_len & 0x000000ff) >> 0); + helperbuf[1] = ((tx_len & 0x0000ff00) >> 8); + helperbuf[2] = ((tx_len & 0x00ff0000) >> 16); + helperbuf[3] = ((tx_len & 0xff000000) >> 24); + + memcpy(&helperbuf[SDIO_HEADER_LEN], &helper[hlprblknow], + tx_len); + + /* Now send the data */ + ret = sdio_writesb(card->func, card->ioport, + helperbuf, + FIRMWARE_TRANSFER_NBLOCK * + SDIO_BLOCK_SIZE); + if (ret < 0) { + BT_ERR("IO error during helper download @ %d", + hlprblknow); + goto done; + } + + hlprblknow += tx_len; + } while (true); + + BT_DBG("Transferring helper image EOF block"); + + memset(helperbuf, 0x0, SDIO_BLOCK_SIZE); + + ret = sdio_writesb(card->func, card->ioport, helperbuf, + SDIO_BLOCK_SIZE); + if (ret < 0) { + BT_ERR("IO error in writing helper image EOF block"); + goto done; + } + + ret = 0; + +done: + kfree(tmphlprbuf); + if (fw_helper) + release_firmware(fw_helper); + + BT_DBG("Leave"); + + return ret; +} + +static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card) +{ + const struct firmware *fw_firmware = NULL; + const u8 *firmware = NULL; + int firmwarelen, tmpfwbufsz, ret; + unsigned int tries, offset; + u8 base0, base1; + void *tmpfwbuf = NULL; + u8 *fwbuf; + u16 len; + int txlen = 0, tx_blocks = 0, count = 0; + + BT_DBG("Enter"); + + ret = request_firmware(&fw_firmware, card->firmware, + &card->func->dev); + if ((ret < 0) || !fw_firmware) { + BT_ERR("request_firmware(firmware) failed, error code = %d", + ret); + ret = -ENOENT; + goto done; + } + + firmware = fw_firmware->data; + firmwarelen = fw_firmware->size; + + BT_DBG("Downloading FW image (%d bytes)", firmwarelen); + + tmpfwbufsz = ALIGN_SZ(BTM_UPLD_SIZE, BTSDIO_DMA_ALIGN); + tmpfwbuf = kmalloc(tmpfwbufsz, GFP_KERNEL); + if (!tmpfwbuf) { + BT_ERR("Unable to allocate buffer for firmware." + " Terminating download"); + ret = -ENOMEM; + goto done; + } + + memset(tmpfwbuf, 0, tmpfwbufsz); + + /* Ensure aligned firmware buffer */ + fwbuf = (u8 *) ALIGN_ADDR(tmpfwbuf, BTSDIO_DMA_ALIGN); + + /* Perform firmware data transfer */ + offset = 0; + do { + ret = btmrvl_sdio_poll_card_status(card, + CARD_IO_READY | DN_LD_CARD_RDY); + if (ret < 0) { + BT_ERR("FW download with helper poll status" + " timeout @ %d", offset); + goto done; + } + + /* Check if there is more data ? */ + if (offset >= firmwarelen) + break; + + for (tries = 0; tries < MAX_POLL_TRIES; tries++) { + base0 = sdio_readb(card->func, + SQ_READ_BASE_ADDRESS_A0_REG, &ret); + if (ret) { + BT_ERR("BASE0 register read failed:" + " base0 = 0x%04X(%d)." + " Terminating download", + base0, base0); + ret = -EIO; + goto done; + } + base1 = sdio_readb(card->func, + SQ_READ_BASE_ADDRESS_A1_REG, &ret); + if (ret) { + BT_ERR("BASE1 register read failed:" + " base1 = 0x%04X(%d)." + " Terminating download", + base1, base1); + ret = -EIO; + goto done; + } + + len = (((u16) base1) << 8) | base0; + if (len) + break; + + udelay(10); + } + + if (!len) + break; + else if (len > BTM_UPLD_SIZE) { + BT_ERR("FW download failure @%d, invalid length %d", + offset, len); + ret = -EINVAL; + goto done; + } + + txlen = len; + + if (len & BIT(0)) { + count++; + if (count > MAX_WRITE_IOMEM_RETRY) { + BT_ERR("FW download failure @%d, " + "over max retry count", offset); + ret = -EIO; + goto done; + } + BT_ERR("FW CRC error indicated by the helper: " + "len = 0x%04X, txlen = %d", len, txlen); + len &= ~BIT(0); + /* Set txlen to 0 so as to resend from same offset */ + txlen = 0; + } else { + count = 0; + + /* Last block ? */ + if (firmwarelen - offset < txlen) + txlen = firmwarelen - offset; + + tx_blocks = + (txlen + SDIO_BLOCK_SIZE - 1) / SDIO_BLOCK_SIZE; + + memcpy(fwbuf, &firmware[offset], txlen); + } + + ret = sdio_writesb(card->func, card->ioport, fwbuf, + tx_blocks * SDIO_BLOCK_SIZE); + + if (ret < 0) { + BT_ERR("FW download, writesb(%d) failed @%d", + count, offset); + sdio_writeb(card->func, HOST_CMD53_FIN, CONFIG_REG, + &ret); + if (ret) + BT_ERR("writeb failed (CFG)"); + } + + offset += txlen; + } while (true); + + BT_DBG("FW download over, size %d bytes", offset); + + ret = 0; + +done: + kfree(tmpfwbuf); + + if (fw_firmware) + release_firmware(fw_firmware); + + BT_DBG("Leave"); + + return ret; +} + +static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv) +{ + u16 buf_len = 0; + int ret, buf_block_len, blksz; + struct sk_buff *skb = NULL; + u32 type; + u8 *payload = NULL; + struct hci_dev *hdev = priv->btmrvl_dev.hcidev; + struct btmrvl_sdio_card *card = priv->btmrvl_dev.card; + + BT_DBG("Enter"); + + if (!card || !card->func) { + BT_ERR("card or function is NULL!"); + ret = -EINVAL; + goto exit; + } + + /* Read the length of data to be transferred */ + ret = btmrvl_sdio_read_rx_len(card, &buf_len); + if (ret < 0) { + BT_ERR("read rx_len failed"); + ret = -EIO; + goto exit; + } + + blksz = SDIO_BLOCK_SIZE; + buf_block_len = (buf_len + blksz - 1) / blksz; + + if (buf_len <= SDIO_HEADER_LEN + || (buf_block_len * blksz) > ALLOC_BUF_SIZE) { + BT_ERR("invalid packet length: %d", buf_len); + ret = -EINVAL; + goto exit; + } + + /* Allocate buffer */ + skb = bt_skb_alloc(buf_block_len * blksz + BTSDIO_DMA_ALIGN, + GFP_ATOMIC); + if (skb == NULL) { + BT_ERR("No free skb"); + goto exit; + } + + if ((u32) skb->data & (BTSDIO_DMA_ALIGN - 1)) { + skb_put(skb, (u32) skb->data & (BTSDIO_DMA_ALIGN - 1)); + skb_pull(skb, (u32) skb->data & (BTSDIO_DMA_ALIGN - 1)); + } + + payload = skb->tail; + + ret = sdio_readsb(card->func, payload, card->ioport, + buf_block_len * blksz); + if (ret < 0) { + BT_ERR("readsb failed: %d", ret); + ret = -EIO; + goto exit; + } + + /* This is SDIO specific header length: byte[2][1][0], type: byte[3] + * (HCI_COMMAND = 1, ACL_DATA = 2, SCO_DATA = 3, 0xFE = Vendor) + */ + + buf_len = payload[0]; + buf_len |= (u16) payload[1] << 8; + type = payload[3]; + + switch (type) { + case HCI_ACLDATA_PKT: + case HCI_SCODATA_PKT: + case HCI_EVENT_PKT: + bt_cb(skb)->pkt_type = type; + skb->dev = (void *)hdev; + skb_put(skb, buf_len); + skb_pull(skb, SDIO_HEADER_LEN); + + if (type == HCI_EVENT_PKT) + btmrvl_check_evtpkt(priv, skb); + + hci_recv_frame(skb); + hdev->stat.byte_rx += buf_len; + break; + + case MRVL_VENDOR_PKT: + bt_cb(skb)->pkt_type = HCI_VENDOR_PKT; + skb->dev = (void *)hdev; + skb_put(skb, buf_len); + skb_pull(skb, SDIO_HEADER_LEN); + + if (btmrvl_process_event(priv, skb)) + hci_recv_frame(skb); + + hdev->stat.byte_rx += buf_len; + break; + + default: + BT_ERR("Unknow packet type:%d", type); + print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, payload, + blksz * buf_block_len); + + kfree_skb(skb); + skb = NULL; + break; + } + +exit: + if (ret) { + hdev->stat.err_rx++; + if (skb) + kfree_skb(skb); + } + + BT_DBG("Leave"); + + return ret; +} + +static int btmrvl_sdio_get_int_status(struct btmrvl_private *priv, u8 * ireg) +{ + int ret; + u8 sdio_ireg = 0; + struct btmrvl_sdio_card *card = priv->btmrvl_dev.card; + + BT_DBG("Enter"); + + *ireg = 0; + + sdio_ireg = sdio_readb(card->func, HOST_INTSTATUS_REG, &ret); + if (ret) { + BT_ERR("sdio_readb: read int status register failed"); + ret = -EIO; + goto done; + } + + if (sdio_ireg != 0) { + /* + * DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS + * Clear the interrupt status register and re-enable the + * interrupt. + */ + BT_DBG("sdio_ireg = 0x%x", sdio_ireg); + + sdio_writeb(card->func, ~(sdio_ireg) & (DN_LD_HOST_INT_STATUS | + UP_LD_HOST_INT_STATUS), + HOST_INTSTATUS_REG, &ret); + if (ret) { + BT_ERR("sdio_writeb: clear int status register " + "failed"); + ret = -EIO; + goto done; + } + } + + if (sdio_ireg & DN_LD_HOST_INT_STATUS) { + if (priv->btmrvl_dev.tx_dnld_rdy) + BT_DBG("tx_done already received: " + " int_status=0x%x", sdio_ireg); + else + priv->btmrvl_dev.tx_dnld_rdy = true; + } + + if (sdio_ireg & UP_LD_HOST_INT_STATUS) + btmrvl_sdio_card_to_host(priv); + + *ireg = sdio_ireg; + + ret = 0; + +done: + BT_DBG("Leave"); + + return ret; +} + +static void btmrvl_sdio_interrupt(struct sdio_func *func) +{ + struct btmrvl_private *priv; + struct hci_dev *hcidev; + struct btmrvl_sdio_card *card; + u8 ireg = 0; + + BT_DBG("Enter"); + + card = sdio_get_drvdata(func); + if (card && card->priv) { + priv = card->priv; + hcidev = priv->btmrvl_dev.hcidev; + + if (btmrvl_sdio_get_int_status(priv, &ireg)) + BT_ERR("reading HOST_INT_STATUS_REG failed"); + else + BT_DBG("HOST_INT_STATUS_REG %#x", ireg); + + btmrvl_interrupt(priv); + } + + BT_DBG("Leave"); +} + +static int btmrvl_sdio_register_dev(struct btmrvl_sdio_card *card) +{ + int ret = 0, i; + u8 reg; + struct sdio_func *func; + + BT_DBG("Enter"); + + if (!card || !card->func) { + BT_ERR("Error: card or function is NULL!"); + ret = -EINVAL; + goto failed; + } + + func = card->func; + + for (i = 0; i < ARRAY_SIZE(btmrvl_sdio_devices); i++) { + if (func->device == btmrvl_sdio_devices[i].dev_id) + break; + } + + if (i == ARRAY_SIZE(btmrvl_sdio_devices)) { + BT_ERR("Error: unknown device id 0x%x", func->device); + ret = -EINVAL; + goto failed; + } + + card->helper = btmrvl_sdio_devices[i].helper; + card->firmware = btmrvl_sdio_devices[i].firmware; + + sdio_claim_host(func); + + ret = sdio_enable_func(func); + if (ret) { + BT_ERR("sdio_enable_func() failed: ret=%d", ret); + ret = -EIO; + goto release_host; + } + + ret = sdio_claim_irq(func, btmrvl_sdio_interrupt); + if (ret) { + BT_ERR("sdio_claim_irq failed: ret=%d", ret); + ret = -EIO; + goto disable_func; + } + + ret = sdio_set_block_size(card->func, SDIO_BLOCK_SIZE); + if (ret) { + BT_ERR("cannot set SDIO block size"); + ret = -EIO; + goto release_irq; + } + + reg = sdio_readb(func, IO_PORT_0_REG, &ret); + if (ret < 0) { + ret = -EIO; + goto release_irq; + } + + card->ioport = reg; + + reg = sdio_readb(func, IO_PORT_1_REG, &ret); + if (ret < 0) { + ret = -EIO; + goto release_irq; + } + + card->ioport |= (reg << 8); + + reg = sdio_readb(func, IO_PORT_2_REG, &ret); + if (ret < 0) { + ret = -EIO; + goto release_irq; + } + + card->ioport |= (reg << 16); + + BT_DBG("SDIO FUNC%d IO port: 0x%x", func->num, card->ioport); + + sdio_set_drvdata(func, card); + + sdio_release_host(func); + + BT_DBG("Leave"); + return 0; + +release_irq: + sdio_release_irq(func); + +disable_func: + sdio_disable_func(func); + +release_host: + sdio_release_host(func); + +failed: + BT_DBG("Leave"); + return ret; +} + +static int btmrvl_sdio_unregister_dev(struct btmrvl_sdio_card *card) +{ + BT_DBG("Enter"); + + if (card && card->func) { + sdio_claim_host(card->func); + sdio_release_irq(card->func); + sdio_disable_func(card->func); + sdio_release_host(card->func); + sdio_set_drvdata(card->func, NULL); + } + + BT_DBG("Leave"); + + return 0; +} + +static int btmrvl_sdio_enable_host_int(struct btmrvl_sdio_card *card) +{ + int ret; + + BT_DBG("Enter"); + + if (!card || !card->func) { + BT_DBG("Leave"); + return -EINVAL; + } + + sdio_claim_host(card->func); + + ret = btmrvl_sdio_enable_host_int_mask(card, HIM_ENABLE); + + btmrvl_sdio_get_rx_unit(card); + + sdio_release_host(card->func); + + BT_DBG("Leave"); + + return ret; +} + +static int btmrvl_sdio_disable_host_int(struct btmrvl_sdio_card *card) +{ + int ret; + + BT_DBG("Enter"); + + if (!card || !card->func) { + BT_DBG("Leave"); + return -EINVAL; + } + + sdio_claim_host(card->func); + + ret = btmrvl_sdio_disable_host_int_mask(card, HIM_DISABLE); + + sdio_release_host(card->func); + + BT_DBG("Leave"); + + return ret; +} + +static int btmrvl_sdio_host_to_card(struct btmrvl_private *priv, + u8 *payload, u16 nb) +{ + struct btmrvl_sdio_card *card = priv->btmrvl_dev.card; + int ret = 0; + int buf_block_len; + int blksz; + int i = 0; + u8 *buf = NULL; + void *tmpbuf = NULL; + int tmpbufsz; + + BT_DBG("Enter"); + + if (!card || !card->func) { + BT_ERR("card or function is NULL!"); + BT_DBG("Leave"); + return -EINVAL; + } + + buf = payload; + if ((u32) payload & (BTSDIO_DMA_ALIGN - 1)) { + tmpbufsz = ALIGN_SZ(nb, BTSDIO_DMA_ALIGN); + tmpbuf = kmalloc(tmpbufsz, GFP_KERNEL); + memset(tmpbuf, 0, tmpbufsz); + buf = (u8 *) ALIGN_ADDR(tmpbuf, BTSDIO_DMA_ALIGN); + memcpy(buf, payload, nb); + } + + blksz = SDIO_BLOCK_SIZE; + buf_block_len = (nb + blksz - 1) / blksz; + + sdio_claim_host(card->func); + + do { + /* Transfer data to card */ + ret = sdio_writesb(card->func, card->ioport, buf, + buf_block_len * blksz); + if (ret < 0) { + i++; + BT_ERR("i=%d writesb failed: %d", i, ret); + print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, + payload, nb); + ret = -EIO; + if (i > MAX_WRITE_IOMEM_RETRY) + goto exit; + } + } while (ret); + + priv->btmrvl_dev.tx_dnld_rdy = false; + +exit: + sdio_release_host(card->func); + + BT_DBG("Leave"); + + return ret; +} + +static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card) +{ + int ret = 0; + + BT_DBG("Enter"); + + if (!card || !card->func) { + BT_ERR("card or function is NULL!"); + BT_DBG("Leave"); + return -EINVAL; + } + sdio_claim_host(card->func); + + if (!btmrvl_sdio_verify_fw_download(card, 1)) { + BT_DBG("Firmware already downloaded!"); + goto done; + } + + ret = btmrvl_sdio_download_helper(card); + if (ret) { + BT_ERR("Failed to download helper!"); + ret = -EIO; + goto done; + } + + if (btmrvl_sdio_download_fw_w_helper(card)) { + BT_ERR("Failed to download firmware!"); + ret = -EIO; + goto done; + } + + if (btmrvl_sdio_verify_fw_download(card, MAX_POLL_TRIES)) { + BT_ERR("FW failed to be active in time!"); + ret = -ETIMEDOUT; + goto done; + } + +done: + sdio_release_host(card->func); + + BT_DBG("Leave"); + + return ret; +} + +static int btmrvl_sdio_wakeup_fw(struct btmrvl_private *priv) +{ + struct btmrvl_sdio_card *card = priv->btmrvl_dev.card; + int ret = 0; + + BT_DBG("Enter"); + + if (!card || !card->func) { + BT_ERR("card or function is NULL!"); + BT_DBG("Leave"); + return -EINVAL; + } + + sdio_claim_host(card->func); + + sdio_writeb(card->func, HOST_POWER_UP, CONFIG_REG, &ret); + + sdio_release_host(card->func); + + BT_DBG("wake up firmware"); + + BT_DBG("Leave"); + + return ret; +} + +static int btmrvl_sdio_probe(struct sdio_func *func, + const struct sdio_device_id *id) +{ + int ret = 0; + struct btmrvl_private *priv = NULL; + struct btmrvl_sdio_card *card = NULL; + + BT_DBG("Enter"); + + BT_INFO("vendor=0x%x, device=0x%x, class=%d, fn=%d", + id->vendor, id->device, id->class, func->num); + + card = kzalloc(sizeof(*card), GFP_KERNEL); + if (!card) { + ret = -ENOMEM; + goto done; + } + + card->func = func; + + if (btmrvl_sdio_register_dev(card) < 0) { + BT_ERR("Failed to register BT device!"); + ret = -ENODEV; + goto free_card; + } + + /* Disable the interrupts on the card */ + btmrvl_sdio_disable_host_int(card); + + if (btmrvl_sdio_download_fw(card)) { + BT_ERR("Downloading firmware failed!"); + ret = -ENODEV; + goto unreg_dev; + } + + msleep(100); + + btmrvl_sdio_enable_host_int(card); + + priv = btmrvl_add_card(card); + if (!priv) { + BT_ERR("Initializing card failed!"); + ret = -ENODEV; + goto disable_host_int; + } + + card->priv = priv; + + /* Initialize the interface specific function pointers */ + priv->hw_host_to_card = btmrvl_sdio_host_to_card; + priv->hw_wakeup_firmware = btmrvl_sdio_wakeup_fw; + + strncpy(priv->btmrvl_dev.name, "btmrvl_sdio0", + sizeof(priv->btmrvl_dev.name)); + + btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ); + + BT_DBG("Leave"); + + return 0; + +disable_host_int: + btmrvl_sdio_disable_host_int(card); +unreg_dev: + btmrvl_sdio_unregister_dev(card); +free_card: + kfree(card); +done: + BT_DBG("Leave"); + + return ret; +} + +static void btmrvl_sdio_remove(struct sdio_func *func) +{ + struct btmrvl_sdio_card *card; + + BT_DBG("Enter"); + + if (func) { + card = sdio_get_drvdata(func); + if (card) { + /* Send SHUTDOWN command & disable interrupt + * if user removes the module. + */ + if (user_rmmod) { + btmrvl_send_module_cfg_cmd(card->priv, + MODULE_SHUTDOWN_REQ); + btmrvl_sdio_disable_host_int(card); + } + BT_DBG("unregester dev"); + btmrvl_sdio_unregister_dev(card); + btmrvl_remove_card(card->priv); + kfree(card); + } + } + + BT_DBG("Leave"); +} + +static struct sdio_driver bt_mrvl_sdio = { + .name = "btmrvl_sdio", + .id_table = btmrvl_sdio_ids, + .probe = btmrvl_sdio_probe, + .remove = btmrvl_sdio_remove, +}; + +static int btmrvl_sdio_init_module(void) +{ + BT_DBG("Enter"); + + if (sdio_register_driver(&bt_mrvl_sdio) != 0) { + BT_ERR("SDIO Driver Registration Failed"); + BT_DBG("Leave"); + return -ENODEV; + } + + /* Clear the flag in case user removes the card. */ + user_rmmod = 0; + + BT_DBG("Leave"); + + return 0; +} + +static void btmrvl_sdio_exit_module(void) +{ + BT_DBG("Enter"); + + /* Set the flag as user is removing this module. */ + user_rmmod = 1; + + sdio_unregister_driver(&bt_mrvl_sdio); + + BT_DBG("Leave"); +} + +module_init(btmrvl_sdio_init_module); +module_exit(btmrvl_sdio_exit_module); + +MODULE_AUTHOR("Marvell International Ltd."); +MODULE_DESCRIPTION("Marvell BT-over-SDIO Driver v" VERSION); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h new file mode 100644 index 000000000000..08bef333ded9 --- /dev/null +++ b/drivers/bluetooth/btmrvl_sdio.h @@ -0,0 +1,113 @@ +/** + * Marvell BT-over-SDIO driver: SDIO interface related definitions + * + * Copyright (C) 2009, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + * + **/ + +#ifndef _BTMRVL_SDIO_H_ +#define _BTMRVL_SDIO_H_ + +#define SDIO_HEADER_LEN 4 + +/* SD block size can not bigger than 64 due to buf size limit in firmware */ +/* define SD block size for data Tx/Rx */ +#define SDIO_BLOCK_SIZE 64 + +/* Number of blocks for firmware transfer */ +#define FIRMWARE_TRANSFER_NBLOCK 2 + +/* This is for firmware specific length */ +#define FW_EXTRA_LEN 36 + +#define MRVDRV_SIZE_OF_CMD_BUFFER (2 * 1024) + +#define MRVDRV_BT_RX_PACKET_BUFFER_SIZE \ + (HCI_MAX_FRAME_SIZE + FW_EXTRA_LEN) + +#define ALLOC_BUF_SIZE (((max_t (int, MRVDRV_BT_RX_PACKET_BUFFER_SIZE, \ + MRVDRV_SIZE_OF_CMD_BUFFER) + SDIO_HEADER_LEN \ + + SDIO_BLOCK_SIZE - 1) / SDIO_BLOCK_SIZE) \ + * SDIO_BLOCK_SIZE) + +/* The number of times to try when polling for status */ +#define MAX_POLL_TRIES 100 + +/* Max retry number of CMD53 write */ +#define MAX_WRITE_IOMEM_RETRY 2 + +/* Host Control Registers */ +#define IO_PORT_0_REG 0x00 +#define IO_PORT_1_REG 0x01 +#define IO_PORT_2_REG 0x02 + +#define CONFIG_REG 0x03 +#define HOST_POWER_UP BIT(1) +#define HOST_CMD53_FIN BIT(2) + +#define HOST_INT_MASK_REG 0x04 +#define HIM_DISABLE 0xff +#define HIM_ENABLE (BIT(0) | BIT(1)) + +#define HOST_INTSTATUS_REG 0x05 +#define UP_LD_HOST_INT_STATUS BIT(0) +#define DN_LD_HOST_INT_STATUS BIT(1) + +/* Card Control Registers */ +#define SQ_READ_BASE_ADDRESS_A0_REG 0x10 +#define SQ_READ_BASE_ADDRESS_A1_REG 0x11 + +#define CARD_STATUS_REG 0x20 +#define DN_LD_CARD_RDY BIT(0) +#define CARD_IO_READY BIT(3) + +#define CARD_FW_STATUS0_REG 0x40 +#define CARD_FW_STATUS1_REG 0x41 +#define FIRMWARE_READY 0xfedc + +#define CARD_RX_LEN_REG 0x42 +#define CARD_RX_UNIT_REG 0x43 + + +struct btmrvl_sdio_card { + struct sdio_func *func; + u32 ioport; + const char *helper; + const char *firmware; + u8 rx_unit; + struct btmrvl_private *priv; +}; + +struct btmrvl_sdio_device { + unsigned short dev_id; + const char *helper; + const char *firmware; +}; + + +/* Platform specific DMA alignment */ +#define BTSDIO_DMA_ALIGN 8 + +/* Macros for Data Alignment : size */ +#define ALIGN_SZ(p, a) \ + (((p) + ((a) - 1)) & ~((a) - 1)) + +/* Macros for Data Alignment : address */ +#define ALIGN_ADDR(p, a) \ + ((((u32)(p)) + (((u32)(a)) - 1)) & ~(((u32)(a)) - 1)) + +#endif /* _BTMRVL_SDIO_H_ */ |