diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/block/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/char/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/crypto/Kconfig | 22 | ||||
| -rw-r--r-- | drivers/s390/block/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/s390/char/Kconfig (renamed from drivers/s390/Kconfig) | 111 | ||||
| -rw-r--r-- | drivers/s390/net/Kconfig | 8 |
6 files changed, 53 insertions, 105 deletions
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 17ee97f3a99b..b4c8319138b2 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -444,8 +444,6 @@ config CDROM_PKTCDVD_WCACHE this option is dangerous unless the CD-RW media is known good, as we don't do deferred write error handling yet. -source "drivers/s390/block/Kconfig" - config ATA_OVER_ETH tristate "ATA over Ethernet support" depends on NET @@ -453,6 +451,8 @@ config ATA_OVER_ETH This driver provides Support for ATA over Ethernet block devices like the Coraid EtherDrive (R) Storage Blade. +source "drivers/s390/block/Kconfig" + endmenu endif diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 7ff85ad62806..abcafac64738 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -1081,5 +1081,7 @@ config DEVPORT depends on ISA || PCI default y +source "drivers/s390/char/Kconfig" + endmenu diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index f4c634504d1a..e678a33ea672 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -56,4 +56,26 @@ config CRYPTO_DEV_GEODE To compile this driver as a module, choose M here: the module will be called geode-aes. +config ZCRYPT + tristate "Support for PCI-attached cryptographic adapters" + depends on S390 + select ZCRYPT_MONOLITHIC if ZCRYPT="y" + default "m" + help + Select this option if you want to use a PCI-attached cryptographic + adapter like: + + PCI Cryptographic Accelerator (PCICA) + + PCI Cryptographic Coprocessor (PCICC) + + PCI-X Cryptographic Coprocessor (PCIXCC) + + Crypto Express2 Coprocessor (CEX2C) + + Crypto Express2 Accelerator (CEX2A) + +config ZCRYPT_MONOLITHIC + bool "Monolithic zcrypt module" + depends on ZCRYPT="m" + help + Select this option if you want to have a single module z90crypt.ko + that contains all parts of the crypto device driver (ap bus, + request router and all the card drivers). + endmenu diff --git a/drivers/s390/block/Kconfig b/drivers/s390/block/Kconfig index b250c5354503..e879b212cf43 100644 --- a/drivers/s390/block/Kconfig +++ b/drivers/s390/block/Kconfig @@ -1,11 +1,9 @@ -if S390 && BLOCK - comment "S/390 block device drivers" - depends on S390 + depends on S390 && BLOCK config BLK_DEV_XPRAM tristate "XPRAM disk support" - depends on S390 + depends on S390 && BLOCK help Select this option if you want to use your expanded storage on S/390 or zSeries as a disk. This is useful as a _fast_ swap device if you @@ -15,12 +13,13 @@ config BLK_DEV_XPRAM config DCSSBLK tristate "DCSSBLK support" + depends on S390 && BLOCK help Support for dcss block device config DASD tristate "Support for DASD devices" - depends on CCW + depends on CCW && BLOCK help Enable this option if you want to access DASDs directly utilizing S/390s channel subsystem commands. This is necessary for running @@ -62,5 +61,3 @@ config DASD_EER This driver provides a character device interface to the DASD extended error reporting. This is only needed if you want to use applications written for the EER facility. - -endif diff --git a/drivers/s390/Kconfig b/drivers/s390/char/Kconfig index 165af398fdea..66102a184322 100644 --- a/drivers/s390/Kconfig +++ b/drivers/s390/char/Kconfig @@ -1,69 +1,9 @@ -config CCW - bool - default y - -source "drivers/block/Kconfig" - -source "drivers/md/Kconfig" - - -menu "Character device drivers" - -config UNIX98_PTYS - bool "Unix98 PTY support" - ---help--- - A pseudo terminal (PTY) is a software device consisting of two - halves: a master and a slave. The slave device behaves identical to - a physical terminal; the master device is used by a process to - read data from and write data to the slave, thereby emulating a - terminal. Typical programs for the master side are telnet servers - and xterms. - - Linux has traditionally used the BSD-like names /dev/ptyxx for - masters and /dev/ttyxx for slaves of pseudo terminals. This scheme - has a number of problems. The GNU C library glibc 2.1 and later, - however, supports the Unix98 naming standard: in order to acquire a - pseudo terminal, a process opens /dev/ptmx; the number of the pseudo - terminal is then made available to the process and the pseudo - terminal slave can be accessed as /dev/pts/<number>. What was - traditionally /dev/ttyp2 will then be /dev/pts/2, for example. - - The entries in /dev/pts/ are created on the fly by a virtual - file system; therefore, if you say Y here you should say Y to - "/dev/pts file system for Unix98 PTYs" as well. - - If you want to say Y here, you need to have the C library glibc 2.1 - or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*"). - Read the instructions in <file:Documentation/Changes> pertaining to - pseudo terminals. It's safe to say N. - -config UNIX98_PTY_COUNT - int "Maximum number of Unix98 PTYs in use (0-2048)" - depends on UNIX98_PTYS - default "256" - help - The maximum number of Unix98 PTYs that can be used at any one time. - The default is 256, and should be enough for desktop systems. Server - machines which support incoming telnet/rlogin/ssh connections and/or - serve several X terminals may want to increase this: every incoming - connection and every xterm uses up one PTY. - - When not in use, each additional set of 256 PTYs occupy - approximately 8 KB of kernel memory on 32-bit architectures. - -config HANGCHECK_TIMER - tristate "Hangcheck timer" - help - The hangcheck-timer module detects when the system has gone - out to lunch past a certain margin. It can reboot the system - or merely print a warning. - -source "drivers/char/watchdog/Kconfig" - comment "S/390 character device drivers" + depends on S390 config TN3270 tristate "Support for locally attached 3270 terminals" + depends on CCW help Include support for IBM 3270 terminals. @@ -88,6 +28,7 @@ config TN3270_CONSOLE config TN3215 bool "Support for 3215 line mode terminal" + depends on CCW help Include support for IBM 3215 line-mode terminals. @@ -99,12 +40,19 @@ config TN3215_CONSOLE Linux system console. config CCW_CONSOLE - bool - depends on TN3215_CONSOLE || TN3270_CONSOLE - default y - + bool + depends on TN3215_CONSOLE || TN3270_CONSOLE + default y + +config SCLP + bool "Support for SCLP" + depends on S390 + help + Include support for the SCLP interface to the service element. + config SCLP_TTY bool "Support for SCLP line mode terminal" + depends on SCLP help Include support for IBM SCLP line-mode terminals. @@ -117,6 +65,7 @@ config SCLP_CONSOLE config SCLP_VT220_TTY bool "Support for SCLP VT220-compatible terminal" + depends on SCLP help Include support for an IBM SCLP VT220-compatible terminal. @@ -129,6 +78,7 @@ config SCLP_VT220_CONSOLE config SCLP_CPI tristate "Control-Program Identification" + depends on SCLP help This option enables the hardware console interface for system identification. This is commonly used for workload management and @@ -140,6 +90,7 @@ config SCLP_CPI config S390_TAPE tristate "S/390 tape device support" + depends on CCW help Select this option if you want to access channel-attached tape devices on IBM S/390 or zSeries. @@ -194,6 +145,7 @@ config VMLOGRDR config VMCP tristate "Support for the z/VM CP interface (VM only)" + depends on S390 help Select this option if you want to be able to interact with the control program on z/VM @@ -207,33 +159,8 @@ config MONREADER config MONWRITER tristate "API for writing z/VM monitor service records" + depends on S390 default "m" help Character device driver for writing z/VM monitor service records -endmenu - -menu "Cryptographic devices" - -config ZCRYPT - tristate "Support for PCI-attached cryptographic adapters" - select ZCRYPT_MONOLITHIC if ZCRYPT="y" - default "m" - help - Select this option if you want to use a PCI-attached cryptographic - adapter like: - + PCI Cryptographic Accelerator (PCICA) - + PCI Cryptographic Coprocessor (PCICC) - + PCI-X Cryptographic Coprocessor (PCIXCC) - + Crypto Express2 Coprocessor (CEX2C) - + Crypto Express2 Accelerator (CEX2A) - -config ZCRYPT_MONOLITHIC - bool "Monolithic zcrypt module" - depends on ZCRYPT="m" - help - Select this option if you want to have a single module z90crypt.ko - that contains all parts of the crypto device driver (ap bus, - request router and all the card drivers). - -endmenu diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig index f98fa465df0a..eada69dec4fe 100644 --- a/drivers/s390/net/Kconfig +++ b/drivers/s390/net/Kconfig @@ -3,7 +3,7 @@ menu "S/390 network device drivers" config LCS tristate "Lan Channel Station Interface" - depends on NETDEVICES && (NET_ETHERNET || TR || FDDI) + depends on CCW && NETDEVICES && (NET_ETHERNET || TR || FDDI) help Select this option if you want to use LCS networking on IBM S/390 or zSeries. This device driver supports Token Ring (IEEE 802.5), @@ -13,7 +13,7 @@ config LCS config CTC tristate "CTC device support" - depends on NETDEVICES + depends on CCW && NETDEVICES help Select this option if you want to use channel-to-channel networking on IBM S/390 or zSeries. This device driver supports real CTC @@ -42,7 +42,7 @@ config SMSGIUCV config CLAW tristate "CLAW device support" - depends on NETDEVICES + depends on CCW && NETDEVICES help This driver supports channel attached CLAW devices. CLAW is Common Link Access for Workstation. Common devices @@ -52,7 +52,7 @@ config CLAW config QETH tristate "Gigabit Ethernet device support" - depends on NETDEVICES && IP_MULTICAST && QDIO + depends on CCW && NETDEVICES && IP_MULTICAST && QDIO help This driver supports the IBM S/390 and zSeries OSA Express adapters in QDIO mode (all media types), HiperSockets interfaces and VM GuestLAN |