summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/chipidea/host.c2
-rw-r--r--drivers/usb/dwc2/core.c11
-rw-r--r--drivers/usb/dwc2/core.h7
-rw-r--r--drivers/usb/dwc2/gadget.c53
-rw-r--r--drivers/usb/dwc3/gadget.c26
-rw-r--r--drivers/usb/gadget/function/f_fs.c107
-rw-r--r--drivers/usb/gadget/function/u_ether.c5
-rw-r--r--drivers/usb/gadget/udc/atmel_usba_udc.c2
-rw-r--r--drivers/usb/host/ehci-platform.c2
-rw-r--r--drivers/usb/host/ohci-at91.c9
-rw-r--r--drivers/usb/host/ohci-hcd.c2
-rw-r--r--drivers/usb/host/xhci-hub.c41
-rw-r--r--drivers/usb/host/xhci-pci.c10
-rw-r--r--drivers/usb/host/xhci.h3
-rw-r--r--drivers/usb/musb/musb_gadget.c4
-rw-r--r--drivers/usb/musb/omap2430.c7
-rw-r--r--drivers/usb/renesas_usbhs/rcar3.c8
-rw-r--r--drivers/usb/serial/cp210x.c4
-rw-r--r--drivers/usb/serial/ftdi_sio.c3
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h5
-rw-r--r--drivers/usb/serial/usb-serial.c3
-rw-r--r--drivers/usb/wusbcore/crypto.c61
22 files changed, 295 insertions, 80 deletions
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 96ae69502c86..111b0e0b8698 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -188,6 +188,8 @@ static void host_stop(struct ci_hdrc *ci)
if (hcd) {
usb_remove_hcd(hcd);
+ ci->role = CI_ROLE_END;
+ synchronize_irq(ci->irq);
usb_put_hcd(hcd);
if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
(ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index fa9b26b91507..4c0fa0b17353 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -463,9 +463,18 @@ static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
*/
void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
{
+ bool ret;
+
switch (hsotg->dr_mode) {
case USB_DR_MODE_HOST:
- dwc2_force_mode(hsotg, true);
+ ret = dwc2_force_mode(hsotg, true);
+ /*
+ * NOTE: This is required for some rockchip soc based
+ * platforms on their host-only dwc2.
+ */
+ if (!ret)
+ msleep(50);
+
break;
case USB_DR_MODE_PERIPHERAL:
dwc2_force_mode(hsotg, false);
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index aad4107ef927..2a21a0414b1d 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -259,6 +259,13 @@ enum dwc2_lx_state {
DWC2_L3, /* Off state */
};
+/*
+ * Gadget periodic tx fifo sizes as used by legacy driver
+ * EP0 is not included
+ */
+#define DWC2_G_P_LEGACY_TX_FIFO_SIZE {256, 256, 256, 256, 768, 768, 768, \
+ 768, 0, 0, 0, 0, 0, 0, 0}
+
/* Gadget ep0 states */
enum dwc2_ep0_state {
DWC2_EP0_SETUP,
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 4cd6403a7566..24fbebc9b409 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -186,10 +186,9 @@ static void dwc2_hsotg_ctrl_epint(struct dwc2_hsotg *hsotg,
*/
static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg)
{
- unsigned int fifo;
+ unsigned int ep;
unsigned int addr;
int timeout;
- u32 dptxfsizn;
u32 val;
/* Reset fifo map if not correctly cleared during previous session */
@@ -217,16 +216,16 @@ static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg)
* them to endpoints dynamically according to maxpacket size value of
* given endpoint.
*/
- for (fifo = 1; fifo < MAX_EPS_CHANNELS; fifo++) {
- dptxfsizn = dwc2_readl(hsotg->regs + DPTXFSIZN(fifo));
-
- val = (dptxfsizn & FIFOSIZE_DEPTH_MASK) | addr;
- addr += dptxfsizn >> FIFOSIZE_DEPTH_SHIFT;
-
- if (addr > hsotg->fifo_mem)
- break;
+ for (ep = 1; ep < MAX_EPS_CHANNELS; ep++) {
+ if (!hsotg->g_tx_fifo_sz[ep])
+ continue;
+ val = addr;
+ val |= hsotg->g_tx_fifo_sz[ep] << FIFOSIZE_DEPTH_SHIFT;
+ WARN_ONCE(addr + hsotg->g_tx_fifo_sz[ep] > hsotg->fifo_mem,
+ "insufficient fifo memory");
+ addr += hsotg->g_tx_fifo_sz[ep];
- dwc2_writel(val, hsotg->regs + DPTXFSIZN(fifo));
+ dwc2_writel(val, hsotg->regs + DPTXFSIZN(ep));
}
/*
@@ -3807,10 +3806,36 @@ static void dwc2_hsotg_dump(struct dwc2_hsotg *hsotg)
static void dwc2_hsotg_of_probe(struct dwc2_hsotg *hsotg)
{
struct device_node *np = hsotg->dev->of_node;
+ u32 len = 0;
+ u32 i = 0;
/* Enable dma if requested in device tree */
hsotg->g_using_dma = of_property_read_bool(np, "g-use-dma");
+ /*
+ * Register TX periodic fifo size per endpoint.
+ * EP0 is excluded since it has no fifo configuration.
+ */
+ if (!of_find_property(np, "g-tx-fifo-size", &len))
+ goto rx_fifo;
+
+ len /= sizeof(u32);
+
+ /* Read tx fifo sizes other than ep0 */
+ if (of_property_read_u32_array(np, "g-tx-fifo-size",
+ &hsotg->g_tx_fifo_sz[1], len))
+ goto rx_fifo;
+
+ /* Add ep0 */
+ len++;
+
+ /* Make remaining TX fifos unavailable */
+ if (len < MAX_EPS_CHANNELS) {
+ for (i = len; i < MAX_EPS_CHANNELS; i++)
+ hsotg->g_tx_fifo_sz[i] = 0;
+ }
+
+rx_fifo:
/* Register RX fifo size */
of_property_read_u32(np, "g-rx-fifo-size", &hsotg->g_rx_fifo_sz);
@@ -3832,10 +3857,13 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
struct device *dev = hsotg->dev;
int epnum;
int ret;
+ int i;
+ u32 p_tx_fifo[] = DWC2_G_P_LEGACY_TX_FIFO_SIZE;
/* Initialize to legacy fifo configuration values */
hsotg->g_rx_fifo_sz = 2048;
hsotg->g_np_g_tx_fifo_sz = 1024;
+ memcpy(&hsotg->g_tx_fifo_sz[1], p_tx_fifo, sizeof(p_tx_fifo));
/* Device tree specific probe */
dwc2_hsotg_of_probe(hsotg);
@@ -3853,6 +3881,9 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
dev_dbg(dev, "NonPeriodic TXFIFO size: %d\n",
hsotg->g_np_g_tx_fifo_sz);
dev_dbg(dev, "RXFIFO size: %d\n", hsotg->g_rx_fifo_sz);
+ for (i = 0; i < MAX_EPS_CHANNELS; i++)
+ dev_dbg(dev, "Periodic TXFIFO%2d size: %d\n", i,
+ hsotg->g_tx_fifo_sz[i]);
hsotg->gadget.max_speed = USB_SPEED_HIGH;
hsotg->gadget.ops = &dwc2_hsotg_gadget_ops;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 07cc8929f271..1dfa56a5f1c5 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -783,6 +783,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
req->trb = trb;
req->trb_dma = dwc3_trb_dma_offset(dep, trb);
req->first_trb_index = dep->trb_enqueue;
+ dep->queued_requests++;
}
dwc3_ep_inc_enq(dep);
@@ -833,8 +834,6 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
trb->ctrl |= DWC3_TRB_CTRL_HWO;
- dep->queued_requests++;
-
trace_dwc3_prepare_trb(dep, trb);
}
@@ -1074,9 +1073,17 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
list_add_tail(&req->list, &dep->pending_list);
- if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
- dep->flags & DWC3_EP_PENDING_REQUEST) {
- if (list_empty(&dep->started_list)) {
+ /*
+ * NOTICE: Isochronous endpoints should NEVER be prestarted. We must
+ * wait for a XferNotReady event so we will know what's the current
+ * (micro-)frame number.
+ *
+ * Without this trick, we are very, very likely gonna get Bus Expiry
+ * errors which will force us issue EndTransfer command.
+ */
+ if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
+ if ((dep->flags & DWC3_EP_PENDING_REQUEST) &&
+ list_empty(&dep->started_list)) {
dwc3_stop_active_transfer(dwc, dep->number, true);
dep->flags = DWC3_EP_ENABLED;
}
@@ -1861,8 +1868,11 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
unsigned int s_pkt = 0;
unsigned int trb_status;
- dep->queued_requests--;
dwc3_ep_inc_deq(dep);
+
+ if (req->trb == trb)
+ dep->queued_requests--;
+
trace_dwc3_complete_trb(dep, trb);
/*
@@ -2980,7 +2990,7 @@ err3:
kfree(dwc->setup_buf);
err2:
- dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
+ dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb) * 2,
dwc->ep0_trb, dwc->ep0_trb_addr);
err1:
@@ -3005,7 +3015,7 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
kfree(dwc->setup_buf);
kfree(dwc->zlp_buf);
- dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
+ dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb) * 2,
dwc->ep0_trb, dwc->ep0_trb_addr);
dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 54ad100af35b..e40d47d47d82 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -136,8 +136,60 @@ struct ffs_epfile {
/*
* Buffer for holding data from partial reads which may happen since
* we’re rounding user read requests to a multiple of a max packet size.
+ *
+ * The pointer is initialised with NULL value and may be set by
+ * __ffs_epfile_read_data function to point to a temporary buffer.
+ *
+ * In normal operation, calls to __ffs_epfile_read_buffered will consume
+ * data from said buffer and eventually free it. Importantly, while the
+ * function is using the buffer, it sets the pointer to NULL. This is
+ * all right since __ffs_epfile_read_data and __ffs_epfile_read_buffered
+ * can never run concurrently (they are synchronised by epfile->mutex)
+ * so the latter will not assign a new value to the pointer.
+ *
+ * Meanwhile ffs_func_eps_disable frees the buffer (if the pointer is
+ * valid) and sets the pointer to READ_BUFFER_DROP value. This special
+ * value is crux of the synchronisation between ffs_func_eps_disable and
+ * __ffs_epfile_read_data.
+ *
+ * Once __ffs_epfile_read_data is about to finish it will try to set the
+ * pointer back to its old value (as described above), but seeing as the
+ * pointer is not-NULL (namely READ_BUFFER_DROP) it will instead free
+ * the buffer.
+ *
+ * == State transitions ==
+ *
+ * • ptr == NULL: (initial state)
+ * ◦ __ffs_epfile_read_buffer_free: go to ptr == DROP
+ * ◦ __ffs_epfile_read_buffered: nop
+ * ◦ __ffs_epfile_read_data allocates temp buffer: go to ptr == buf
+ * ◦ reading finishes: n/a, not in ‘and reading’ state
+ * • ptr == DROP:
+ * ◦ __ffs_epfile_read_buffer_free: nop
+ * ◦ __ffs_epfile_read_buffered: go to ptr == NULL
+ * ◦ __ffs_epfile_read_data allocates temp buffer: free buf, nop
+ * ◦ reading finishes: n/a, not in ‘and reading’ state
+ * • ptr == buf:
+ * ◦ __ffs_epfile_read_buffer_free: free buf, go to ptr == DROP
+ * ◦ __ffs_epfile_read_buffered: go to ptr == NULL and reading
+ * ◦ __ffs_epfile_read_data: n/a, __ffs_epfile_read_buffered
+ * is always called first
+ * ◦ reading finishes: n/a, not in ‘and reading’ state
+ * • ptr == NULL and reading:
+ * ◦ __ffs_epfile_read_buffer_free: go to ptr == DROP and reading
+ * ◦ __ffs_epfile_read_buffered: n/a, mutex is held
+ * ◦ __ffs_epfile_read_data: n/a, mutex is held
+ * ◦ reading finishes and …
+ * … all data read: free buf, go to ptr == NULL
+ * … otherwise: go to ptr == buf and reading
+ * • ptr == DROP and reading:
+ * ◦ __ffs_epfile_read_buffer_free: nop
+ * ◦ __ffs_epfile_read_buffered: n/a, mutex is held
+ * ◦ __ffs_epfile_read_data: n/a, mutex is held
+ * ◦ reading finishes: free buf, go to ptr == DROP
*/
- struct ffs_buffer *read_buffer; /* P: epfile->mutex */
+ struct ffs_buffer *read_buffer;
+#define READ_BUFFER_DROP ((struct ffs_buffer *)ERR_PTR(-ESHUTDOWN))
char name[5];
@@ -736,25 +788,47 @@ static void ffs_epfile_async_io_complete(struct usb_ep *_ep,
schedule_work(&io_data->work);
}
+static void __ffs_epfile_read_buffer_free(struct ffs_epfile *epfile)
+{
+ /*
+ * See comment in struct ffs_epfile for full read_buffer pointer
+ * synchronisation story.
+ */
+ struct ffs_buffer *buf = xchg(&epfile->read_buffer, READ_BUFFER_DROP);
+ if (buf && buf != READ_BUFFER_DROP)
+ kfree(buf);
+}
+
/* Assumes epfile->mutex is held. */
static ssize_t __ffs_epfile_read_buffered(struct ffs_epfile *epfile,
struct iov_iter *iter)
{
- struct ffs_buffer *buf = epfile->read_buffer;
+ /*
+ * Null out epfile->read_buffer so ffs_func_eps_disable does not free
+ * the buffer while we are using it. See comment in struct ffs_epfile
+ * for full read_buffer pointer synchronisation story.
+ */
+ struct ffs_buffer *buf = xchg(&epfile->read_buffer, NULL);
ssize_t ret;
- if (!buf)
+ if (!buf || buf == READ_BUFFER_DROP)
return 0;
ret = copy_to_iter(buf->data, buf->length, iter);
if (buf->length == ret) {
kfree(buf);
- epfile->read_buffer = NULL;
- } else if (unlikely(iov_iter_count(iter))) {
+ return ret;
+ }
+
+ if (unlikely(iov_iter_count(iter))) {
ret = -EFAULT;
} else {
buf->length -= ret;
buf->data += ret;
}
+
+ if (cmpxchg(&epfile->read_buffer, NULL, buf))
+ kfree(buf);
+
return ret;
}
@@ -783,7 +857,15 @@ static ssize_t __ffs_epfile_read_data(struct ffs_epfile *epfile,
buf->length = data_len;
buf->data = buf->storage;
memcpy(buf->storage, data + ret, data_len);
- epfile->read_buffer = buf;
+
+ /*
+ * At this point read_buffer is NULL or READ_BUFFER_DROP (if
+ * ffs_func_eps_disable has been called in the meanwhile). See comment
+ * in struct ffs_epfile for full read_buffer pointer synchronisation
+ * story.
+ */
+ if (unlikely(cmpxchg(&epfile->read_buffer, NULL, buf)))
+ kfree(buf);
return ret;
}
@@ -1097,8 +1179,7 @@ ffs_epfile_release(struct inode *inode, struct file *file)
ENTER();
- kfree(epfile->read_buffer);
- epfile->read_buffer = NULL;
+ __ffs_epfile_read_buffer_free(epfile);
ffs_data_closed(epfile->ffs);
return 0;
@@ -1724,24 +1805,20 @@ static void ffs_func_eps_disable(struct ffs_function *func)
unsigned count = func->ffs->eps_count;
unsigned long flags;
+ spin_lock_irqsave(&func->ffs->eps_lock, flags);
do {
- if (epfile)
- mutex_lock(&epfile->mutex);
- spin_lock_irqsave(&func->ffs->eps_lock, flags);
/* pending requests get nuked */
if (likely(ep->ep))
usb_ep_disable(ep->ep);
++ep;
- spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
if (epfile) {
epfile->ep = NULL;
- kfree(epfile->read_buffer);
- epfile->read_buffer = NULL;
- mutex_unlock(&epfile->mutex);
+ __ffs_epfile_read_buffer_free(epfile);
++epfile;
}
} while (--count);
+ spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
}
static int ffs_func_eps_enable(struct ffs_function *func)
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 9c8c9ed1dc9e..fe1811650dbc 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -590,8 +590,9 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
/* throttle high/super speed IRQ rate back slightly */
if (gadget_is_dualspeed(dev->gadget))
- req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH ||
- dev->gadget->speed == USB_SPEED_SUPER)
+ req->no_interrupt = (((dev->gadget->speed == USB_SPEED_HIGH ||
+ dev->gadget->speed == USB_SPEED_SUPER)) &&
+ !list_empty(&dev->tx_reqs))
? ((atomic_read(&dev->tx_qlen) % dev->qmult) != 0)
: 0;
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index bb1f6c8f0f01..45bc997d0711 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1978,7 +1978,7 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
dev_err(&pdev->dev, "of_probe: name error(%d)\n", ret);
goto err;
}
- ep->ep.name = name;
+ ep->ep.name = kasprintf(GFP_KERNEL, "ep%d", ep->index);
ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 876dca4fc216..a268d9e8d6cf 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -39,7 +39,7 @@
#define DRIVER_DESC "EHCI generic platform driver"
#define EHCI_MAX_CLKS 4
-#define EHCI_MAX_RSTS 3
+#define EHCI_MAX_RSTS 4
#define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv)
struct ehci_platform_priv {
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 5b5880c0ae19..b38a228134df 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -221,6 +221,12 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
ohci->num_ports = board->ports;
at91_start_hc(pdev);
+ /*
+ * The RemoteWakeupConnected bit has to be set explicitly
+ * before calling ohci_run. The reset value of this bit is 0.
+ */
+ ohci->hc_control = OHCI_CTRL_RWC;
+
retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (retval == 0) {
device_wakeup_enable(hcd->self.controller);
@@ -677,9 +683,6 @@ ohci_hcd_at91_drv_suspend(struct device *dev)
* REVISIT: some boards will be able to turn VBUS off...
*/
if (!ohci_at91->wakeup) {
- ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
- ohci->hc_control &= OHCI_CTRL_RWC;
- ohci_writel(ohci, ohci->hc_control, &ohci->regs->control);
ohci->rh_state = OHCI_RH_HALTED;
/* flush the writes */
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 1700908b84ef..86612ac3fda2 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -72,7 +72,7 @@
static const char hcd_name [] = "ohci_hcd";
#define STATECHANGE_DELAY msecs_to_jiffies(300)
-#define IO_WATCHDOG_DELAY msecs_to_jiffies(250)
+#define IO_WATCHDOG_DELAY msecs_to_jiffies(275)
#include "ohci.h"
#include "pci-quirks.h"
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 730b9fd26685..0ef16900efed 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1166,7 +1166,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
xhci_set_link_state(xhci, port_array, wIndex,
XDEV_RESUME);
spin_unlock_irqrestore(&xhci->lock, flags);
- msleep(20);
+ msleep(USB_RESUME_TIMEOUT);
spin_lock_irqsave(&xhci->lock, flags);
xhci_set_link_state(xhci, port_array, wIndex,
XDEV_U0);
@@ -1355,6 +1355,35 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
return 0;
}
+/*
+ * Workaround for missing Cold Attach Status (CAS) if device re-plugged in S3.
+ * warm reset a USB3 device stuck in polling or compliance mode after resume.
+ * See Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8
+ */
+static bool xhci_port_missing_cas_quirk(int port_index,
+ __le32 __iomem **port_array)
+{
+ u32 portsc;
+
+ portsc = readl(port_array[port_index]);
+
+ /* if any of these are set we are not stuck */
+ if (portsc & (PORT_CONNECT | PORT_CAS))
+ return false;
+
+ if (((portsc & PORT_PLS_MASK) != XDEV_POLLING) &&
+ ((portsc & PORT_PLS_MASK) != XDEV_COMP_MODE))
+ return false;
+
+ /* clear wakeup/change bits, and do a warm port reset */
+ portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
+ portsc |= PORT_WR;
+ writel(portsc, port_array[port_index]);
+ /* flush write */
+ readl(port_array[port_index]);
+ return true;
+}
+
int xhci_bus_resume(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
@@ -1392,6 +1421,14 @@ int xhci_bus_resume(struct usb_hcd *hcd)
u32 temp;
temp = readl(port_array[port_index]);
+
+ /* warm reset CAS limited ports stuck in polling/compliance */
+ if ((xhci->quirks & XHCI_MISSING_CAS) &&
+ (hcd->speed >= HCD_USB3) &&
+ xhci_port_missing_cas_quirk(port_index, port_array)) {
+ xhci_dbg(xhci, "reset stuck port %d\n", port_index);
+ continue;
+ }
if (DEV_SUPERSPEED_ANY(temp))
temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
else
@@ -1410,7 +1447,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
if (need_usb2_u3_exit) {
spin_unlock_irqrestore(&xhci->lock, flags);
- msleep(20);
+ msleep(USB_RESUME_TIMEOUT);
spin_lock_irqsave(&xhci->lock, flags);
}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index d7b0f97abbad..e96ae80d107e 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -45,11 +45,13 @@
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI 0x9cb1
#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f
#define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8
#define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8
+#define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8
static const char hcd_name[] = "xhci_hcd";
@@ -153,7 +155,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
xhci->quirks |= XHCI_SPURIOUS_REBOOT;
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
- pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {
+ (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI)) {
xhci->quirks |= XHCI_SPURIOUS_REBOOT;
xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
}
@@ -169,6 +172,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
xhci->quirks |= XHCI_SSIC_PORT_UNUSED;
}
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI))
+ xhci->quirks |= XHCI_MISSING_CAS;
+
if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
pdev->device == PCI_DEVICE_ID_EJ168) {
xhci->quirks |= XHCI_RESET_ON_RESUME;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index b2c1dc5dc0f3..f945380035d0 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -314,6 +314,8 @@ struct xhci_op_regs {
#define XDEV_U2 (0x2 << 5)
#define XDEV_U3 (0x3 << 5)
#define XDEV_INACTIVE (0x6 << 5)
+#define XDEV_POLLING (0x7 << 5)
+#define XDEV_COMP_MODE (0xa << 5)
#define XDEV_RESUME (0xf << 5)
/* true: port has power (see HCC_PPC) */
#define PORT_POWER (1 << 9)
@@ -1653,6 +1655,7 @@ struct xhci_hcd {
#define XHCI_MTK_HOST (1 << 21)
#define XHCI_SSIC_PORT_UNUSED (1 << 22)
#define XHCI_NO_64BIT_SUPPORT (1 << 23)
+#define XHCI_MISSING_CAS (1 << 24)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index bff4869a57cd..4042ea017985 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1255,6 +1255,7 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
map_dma_buffer(request, musb, musb_ep);
+ pm_runtime_get_sync(musb->controller);
spin_lock_irqsave(&musb->lock, lockflags);
/* don't queue if the ep is down */
@@ -1275,6 +1276,9 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
unlock:
spin_unlock_irqrestore(&musb->lock, lockflags);
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
+
return status;
}
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 1ab6973d4f61..cc1225485509 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -287,6 +287,7 @@ static int omap2430_musb_init(struct musb *musb)
}
musb->isr = omap2430_musb_interrupt;
phy_init(musb->phy);
+ phy_power_on(musb->phy);
l = musb_readl(musb->mregs, OTG_INTERFSEL);
@@ -323,8 +324,6 @@ static void omap2430_musb_enable(struct musb *musb)
struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev);
struct omap_musb_board_data *data = pdata->board_data;
- if (!WARN_ON(!musb->phy))
- phy_power_on(musb->phy);
switch (glue->status) {
@@ -361,9 +360,6 @@ static void omap2430_musb_disable(struct musb *musb)
struct device *dev = musb->controller;
struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
- if (!WARN_ON(!musb->phy))
- phy_power_off(musb->phy);
-
if (glue->status != MUSB_UNKNOWN)
omap_control_usb_set_mode(glue->control_otghs,
USB_MODE_DISCONNECT);
@@ -375,6 +371,7 @@ static int omap2430_musb_exit(struct musb *musb)
struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
omap2430_low_level_exit(musb);
+ phy_power_off(musb->phy);
phy_exit(musb->phy);
musb->phy = NULL;
cancel_work_sync(&glue->omap_musb_mailbox_work);
diff --git a/drivers/usb/renesas_usbhs/rcar3.c b/drivers/usb/renesas_usbhs/rcar3.c
index 1d70add926f0..d544b331c9f2 100644
--- a/drivers/usb/renesas_usbhs/rcar3.c
+++ b/drivers/usb/renesas_usbhs/rcar3.c
@@ -9,6 +9,7 @@
*
*/
+#include <linux/delay.h>
#include <linux/io.h>
#include "common.h"
#include "rcar3.h"
@@ -35,10 +36,13 @@ static int usbhs_rcar3_power_ctrl(struct platform_device *pdev,
usbhs_write32(priv, UGCTRL2, UGCTRL2_RESERVED_3 | UGCTRL2_USB0SEL_OTG);
- if (enable)
+ if (enable) {
usbhs_bset(priv, LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
- else
+ /* The controller on R-Car Gen3 needs to wait up to 45 usec */
+ udelay(45);
+ } else {
usbhs_bset(priv, LPSTS, LPSTS_SUSPM, 0);
+ }
return 0;
}
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 54a4de0efdba..f61477bed3a8 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -1077,7 +1077,9 @@ static int cp210x_tiocmget(struct tty_struct *tty)
u8 control;
int result;
- cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
+ result = cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
+ if (result)
+ return result;
result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index b2d767e743fc..0ff7f38d7800 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -986,7 +986,8 @@ static const struct usb_device_id id_table_combined[] = {
/* ekey Devices */
{ USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) },
/* Infineon Devices */
- { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) },
+ { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_TC1798_PID, 1) },
+ { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_TC2X7_PID, 1) },
/* GE Healthcare devices */
{ USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) },
/* Active Research (Actisense) devices */
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index f87a938cf005..21011c0a4c64 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -626,8 +626,9 @@
/*
* Infineon Technologies
*/
-#define INFINEON_VID 0x058b
-#define INFINEON_TRIBOARD_PID 0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */
+#define INFINEON_VID 0x058b
+#define INFINEON_TRIBOARD_TC1798_PID 0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */
+#define INFINEON_TRIBOARD_TC2X7_PID 0x0043 /* DAS JTAG TriBoard TC2X7 V1.0 */
/*
* Acton Research Corp.
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index d213cf44a7e4..4a037b4a79cf 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1078,7 +1078,8 @@ static int usb_serial_probe(struct usb_interface *interface,
serial->disconnected = 0;
- usb_serial_console_init(serial->port[0]->minor);
+ if (num_ports > 0)
+ usb_serial_console_init(serial->port[0]->minor);
exit:
module_put(type->driver.owner);
return 0;
diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c
index 79b2b628066d..79451f7ef1b7 100644
--- a/drivers/usb/wusbcore/crypto.c
+++ b/drivers/usb/wusbcore/crypto.c
@@ -133,6 +133,13 @@ static void bytewise_xor(void *_bo, const void *_bi1, const void *_bi2,
bo[itr] = bi1[itr] ^ bi2[itr];
}
+/* Scratch space for MAC calculations. */
+struct wusb_mac_scratch {
+ struct aes_ccm_b0 b0;
+ struct aes_ccm_b1 b1;
+ struct aes_ccm_a ax;
+};
+
/*
* CC-MAC function WUSB1.0[6.5]
*
@@ -197,16 +204,15 @@ static void bytewise_xor(void *_bo, const void *_bi1, const void *_bi2,
* what sg[4] is for. Maybe there is a smarter way to do this.
*/
static int wusb_ccm_mac(struct crypto_skcipher *tfm_cbc,
- struct crypto_cipher *tfm_aes, void *mic,
+ struct crypto_cipher *tfm_aes,
+ struct wusb_mac_scratch *scratch,
+ void *mic,
const struct aes_ccm_nonce *n,
const struct aes_ccm_label *a, const void *b,
size_t blen)
{
int result = 0;
SKCIPHER_REQUEST_ON_STACK(req, tfm_cbc);
- struct aes_ccm_b0 b0;
- struct aes_ccm_b1 b1;
- struct aes_ccm_a ax;
struct scatterlist sg[4], sg_dst;
void *dst_buf;
size_t dst_size;
@@ -218,16 +224,17 @@ static int wusb_ccm_mac(struct crypto_skcipher *tfm_cbc,
* These checks should be compile time optimized out
* ensure @a fills b1's mac_header and following fields
*/
- WARN_ON(sizeof(*a) != sizeof(b1) - sizeof(b1.la));
- WARN_ON(sizeof(b0) != sizeof(struct aes_ccm_block));
- WARN_ON(sizeof(b1) != sizeof(struct aes_ccm_block));
- WARN_ON(sizeof(ax) != sizeof(struct aes_ccm_block));
+ WARN_ON(sizeof(*a) != sizeof(scratch->b1) - sizeof(scratch->b1.la));
+ WARN_ON(sizeof(scratch->b0) != sizeof(struct aes_ccm_block));
+ WARN_ON(sizeof(scratch->b1) != sizeof(struct aes_ccm_block));
+ WARN_ON(sizeof(scratch->ax) != sizeof(struct aes_ccm_block));
result = -ENOMEM;
zero_padding = blen % sizeof(struct aes_ccm_block);
if (zero_padding)
zero_padding = sizeof(struct aes_ccm_block) - zero_padding;
- dst_size = blen + sizeof(b0) + sizeof(b1) + zero_padding;
+ dst_size = blen + sizeof(scratch->b0) + sizeof(scratch->b1) +
+ zero_padding;
dst_buf = kzalloc(dst_size, GFP_KERNEL);
if (!dst_buf)
goto error_dst_buf;
@@ -235,9 +242,9 @@ static int wusb_ccm_mac(struct crypto_skcipher *tfm_cbc,
memset(iv, 0, sizeof(iv));
/* Setup B0 */
- b0.flags = 0x59; /* Format B0 */
- b0.ccm_nonce = *n;
- b0.lm = cpu_to_be16(0); /* WUSB1.0[6.5] sez l(m) is 0 */
+ scratch->b0.flags = 0x59; /* Format B0 */
+ scratch->b0.ccm_nonce = *n;
+ scratch->b0.lm = cpu_to_be16(0); /* WUSB1.0[6.5] sez l(m) is 0 */
/* Setup B1
*
@@ -246,12 +253,12 @@ static int wusb_ccm_mac(struct crypto_skcipher *tfm_cbc,
* 14'--after clarification, it means to use A's contents
* for MAC Header, EO, sec reserved and padding.
*/
- b1.la = cpu_to_be16(blen + 14);
- memcpy(&b1.mac_header, a, sizeof(*a));
+ scratch->b1.la = cpu_to_be16(blen + 14);
+ memcpy(&scratch->b1.mac_header, a, sizeof(*a));
sg_init_table(sg, ARRAY_SIZE(sg));
- sg_set_buf(&sg[0], &b0, sizeof(b0));
- sg_set_buf(&sg[1], &b1, sizeof(b1));
+ sg_set_buf(&sg[0], &scratch->b0, sizeof(scratch->b0));
+ sg_set_buf(&sg[1], &scratch->b1, sizeof(scratch->b1));
sg_set_buf(&sg[2], b, blen);
/* 0 if well behaved :) */
sg_set_buf(&sg[3], bzero, zero_padding);
@@ -276,11 +283,12 @@ static int wusb_ccm_mac(struct crypto_skcipher *tfm_cbc,
* POS Crypto API: size is assumed to be AES's block size.
* Thanks for documenting it -- tip taken from airo.c
*/
- ax.flags = 0x01; /* as per WUSB 1.0 spec */
- ax.ccm_nonce = *n;
- ax.counter = 0;
- crypto_cipher_encrypt_one(tfm_aes, (void *)&ax, (void *)&ax);
- bytewise_xor(mic, &ax, iv, 8);
+ scratch->ax.flags = 0x01; /* as per WUSB 1.0 spec */
+ scratch->ax.ccm_nonce = *n;
+ scratch->ax.counter = 0;
+ crypto_cipher_encrypt_one(tfm_aes, (void *)&scratch->ax,
+ (void *)&scratch->ax);
+ bytewise_xor(mic, &scratch->ax, iv, 8);
result = 8;
error_cbc_crypt:
kfree(dst_buf);
@@ -303,6 +311,7 @@ ssize_t wusb_prf(void *out, size_t out_size,
struct aes_ccm_nonce n = *_n;
struct crypto_skcipher *tfm_cbc;
struct crypto_cipher *tfm_aes;
+ struct wusb_mac_scratch *scratch;
u64 sfn = 0;
__le64 sfn_le;
@@ -329,17 +338,25 @@ ssize_t wusb_prf(void *out, size_t out_size,
printk(KERN_ERR "E: can't set AES key: %d\n", (int)result);
goto error_setkey_aes;
}
+ scratch = kmalloc(sizeof(*scratch), GFP_KERNEL);
+ if (!scratch) {
+ result = -ENOMEM;
+ goto error_alloc_scratch;
+ }
for (bitr = 0; bitr < (len + 63) / 64; bitr++) {
sfn_le = cpu_to_le64(sfn++);
memcpy(&n.sfn, &sfn_le, sizeof(n.sfn)); /* n.sfn++... */
- result = wusb_ccm_mac(tfm_cbc, tfm_aes, out + bytes,
+ result = wusb_ccm_mac(tfm_cbc, tfm_aes, scratch, out + bytes,
&n, a, b, blen);
if (result < 0)
goto error_ccm_mac;
bytes += result;
}
result = bytes;
+
+ kfree(scratch);
+error_alloc_scratch:
error_ccm_mac:
error_setkey_aes:
crypto_free_cipher(tfm_aes);
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-22 12:48:29 +0300