diff options
Diffstat (limited to 'drivers/usb/dwc2/hcd.c')
| -rw-r--r-- | drivers/usb/dwc2/hcd.c | 2990 |
1 files changed, 2990 insertions, 0 deletions
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c new file mode 100644 index 000000000000..07dfe855dc20 --- /dev/null +++ b/drivers/usb/dwc2/hcd.c @@ -0,0 +1,2990 @@ +/* + * hcd.c - DesignWare HS OTG Controller host-mode routines + * + * Copyright (C) 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * This file contains the core HCD code, and implements the Linux hc_driver + * API + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> + +#include "core.h" +#include "hcd.h" + +/** + * dwc2_dump_channel_info() - Prints the state of a host channel + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Pointer to the channel to dump + * + * Must be called with interrupt disabled and spinlock held + * + * NOTE: This function will be removed once the peripheral controller code + * is integrated and the driver is stable + */ +static void dwc2_dump_channel_info(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ +#ifdef VERBOSE_DEBUG + int num_channels = hsotg->core_params->host_channels; + struct dwc2_qh *qh; + u32 hcchar; + u32 hcsplt; + u32 hctsiz; + u32 hc_dma; + int i; + + if (chan == NULL) + return; + + hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); + hcsplt = readl(hsotg->regs + HCSPLT(chan->hc_num)); + hctsiz = readl(hsotg->regs + HCTSIZ(chan->hc_num)); + hc_dma = readl(hsotg->regs + HCDMA(chan->hc_num)); + + dev_dbg(hsotg->dev, " Assigned to channel %p:\n", chan); + dev_dbg(hsotg->dev, " hcchar 0x%08x, hcsplt 0x%08x\n", + hcchar, hcsplt); + dev_dbg(hsotg->dev, " hctsiz 0x%08x, hc_dma 0x%08x\n", + hctsiz, hc_dma); + dev_dbg(hsotg->dev, " dev_addr: %d, ep_num: %d, ep_is_in: %d\n", + chan->dev_addr, chan->ep_num, chan->ep_is_in); + dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type); + dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet); + dev_dbg(hsotg->dev, " data_pid_start: %d\n", chan->data_pid_start); + dev_dbg(hsotg->dev, " xfer_started: %d\n", chan->xfer_started); + dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status); + dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf); + dev_dbg(hsotg->dev, " xfer_dma: %08lx\n", + (unsigned long)chan->xfer_dma); + dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len); + dev_dbg(hsotg->dev, " qh: %p\n", chan->qh); + dev_dbg(hsotg->dev, " NP inactive sched:\n"); + list_for_each_entry(qh, &hsotg->non_periodic_sched_inactive, + qh_list_entry) + dev_dbg(hsotg->dev, " %p\n", qh); + dev_dbg(hsotg->dev, " NP active sched:\n"); + list_for_each_entry(qh, &hsotg->non_periodic_sched_active, + qh_list_entry) + dev_dbg(hsotg->dev, " %p\n", qh); + dev_dbg(hsotg->dev, " Channels:\n"); + for (i = 0; i < num_channels; i++) { + struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i]; + + dev_dbg(hsotg->dev, " %2d: %p\n", i, chan); + } +#endif /* VERBOSE_DEBUG */ +} + +/* + * Processes all the URBs in a single list of QHs. Completes them with + * -ETIMEDOUT and frees the QTD. + * + * Must be called with interrupt disabled and spinlock held + */ +static void dwc2_kill_urbs_in_qh_list(struct dwc2_hsotg *hsotg, + struct list_head *qh_list) +{ + struct dwc2_qh *qh, *qh_tmp; + struct dwc2_qtd *qtd, *qtd_tmp; + + list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) { + list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, + qtd_list_entry) { + dwc2_host_complete(hsotg, qtd, -ETIMEDOUT); + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); + } + } +} + +static void dwc2_qh_list_free(struct dwc2_hsotg *hsotg, + struct list_head *qh_list) +{ + struct dwc2_qtd *qtd, *qtd_tmp; + struct dwc2_qh *qh, *qh_tmp; + unsigned long flags; + + if (!qh_list->next) + /* The list hasn't been initialized yet */ + return; + + spin_lock_irqsave(&hsotg->lock, flags); + + /* Ensure there are no QTDs or URBs left */ + dwc2_kill_urbs_in_qh_list(hsotg, qh_list); + + list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) { + dwc2_hcd_qh_unlink(hsotg, qh); + + /* Free each QTD in the QH's QTD list */ + list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, + qtd_list_entry) + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); + + spin_unlock_irqrestore(&hsotg->lock, flags); + dwc2_hcd_qh_free(hsotg, qh); + spin_lock_irqsave(&hsotg->lock, flags); + } + + spin_unlock_irqrestore(&hsotg->lock, flags); +} + +/* + * Responds with an error status of -ETIMEDOUT to all URBs in the non-periodic + * and periodic schedules. The QTD associated with each URB is removed from + * the schedule and freed. This function may be called when a disconnect is + * detected or when the HCD is being stopped. + * + * Must be called with interrupt disabled and spinlock held + */ +static void dwc2_kill_all_urbs(struct dwc2_hsotg *hsotg) +{ + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_inactive); + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_active); + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_inactive); + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_ready); + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_assigned); + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_queued); +} + +/** + * dwc2_hcd_start() - Starts the HCD when switching to Host mode + * + * @hsotg: Pointer to struct dwc2_hsotg + */ +void dwc2_hcd_start(struct dwc2_hsotg *hsotg) +{ + u32 hprt0; + + if (hsotg->op_state == OTG_STATE_B_HOST) { + /* + * Reset the port. During a HNP mode switch the reset + * needs to occur within 1ms and have a duration of at + * least 50ms. + */ + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_RST; + writel(hprt0, hsotg->regs + HPRT0); + } + + queue_delayed_work(hsotg->wq_otg, &hsotg->start_work, + msecs_to_jiffies(50)); +} + +/* Must be called with interrupt disabled and spinlock held */ +static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg) +{ + int num_channels = hsotg->core_params->host_channels; + struct dwc2_host_chan *channel; + u32 hcchar; + int i; + + if (hsotg->core_params->dma_enable <= 0) { + /* Flush out any channel requests in slave mode */ + for (i = 0; i < num_channels; i++) { + channel = hsotg->hc_ptr_array[i]; + if (!list_empty(&channel->hc_list_entry)) + continue; + hcchar = readl(hsotg->regs + HCCHAR(i)); + if (hcchar & HCCHAR_CHENA) { + hcchar &= ~(HCCHAR_CHENA | HCCHAR_EPDIR); + hcchar |= HCCHAR_CHDIS; + writel(hcchar, hsotg->regs + HCCHAR(i)); + } + } + } + + for (i = 0; i < num_channels; i++) { + channel = hsotg->hc_ptr_array[i]; + if (!list_empty(&channel->hc_list_entry)) + continue; + hcchar = readl(hsotg->regs + HCCHAR(i)); + if (hcchar & HCCHAR_CHENA) { + /* Halt the channel */ + hcchar |= HCCHAR_CHDIS; + writel(hcchar, hsotg->regs + HCCHAR(i)); + } + + dwc2_hc_cleanup(hsotg, channel); + list_add_tail(&channel->hc_list_entry, &hsotg->free_hc_list); + /* + * Added for Descriptor DMA to prevent channel double cleanup in + * release_channel_ddma(), which is called from ep_disable when + * device disconnects + */ + channel->qh = NULL; + } +} + +/** + * dwc2_hcd_disconnect() - Handles disconnect of the HCD + * + * @hsotg: Pointer to struct dwc2_hsotg + * + * Must be called with interrupt disabled and spinlock held + */ +void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg) +{ + u32 intr; + + /* Set status flags for the hub driver */ + hsotg->flags.b.port_connect_status_change = 1; + hsotg->flags.b.port_connect_status = 0; + + /* + * Shutdown any transfers in process by clearing the Tx FIFO Empty + * interrupt mask and status bits and disabling subsequent host + * channel interrupts. + */ + intr = readl(hsotg->regs + GINTMSK); + intr &= ~(GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT); + writel(intr, hsotg->regs + GINTMSK); + intr = GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT; + writel(intr, hsotg->regs + GINTSTS); + + /* + * Turn off the vbus power only if the core has transitioned to device + * mode. If still in host mode, need to keep power on to detect a + * reconnection. + */ + if (dwc2_is_device_mode(hsotg)) { + if (hsotg->op_state != OTG_STATE_A_SUSPEND) { + dev_dbg(hsotg->dev, "Disconnect: PortPower off\n"); + writel(0, hsotg->regs + HPRT0); + } + + dwc2_disable_host_interrupts(hsotg); + } + + /* Respond with an error status to all URBs in the schedule */ + dwc2_kill_all_urbs(hsotg); + + if (dwc2_is_host_mode(hsotg)) + /* Clean up any host channels that were in use */ + dwc2_hcd_cleanup_channels(hsotg); + + dwc2_host_disconnect(hsotg); +} + +/** + * dwc2_hcd_rem_wakeup() - Handles Remote Wakeup + * + * @hsotg: Pointer to struct dwc2_hsotg + */ +static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg) +{ + if (hsotg->lx_state == DWC2_L2) + hsotg->flags.b.port_suspend_change = 1; + else + hsotg->flags.b.port_l1_change = 1; +} + +/** + * dwc2_hcd_stop() - Halts the DWC_otg host mode operations in a clean manner + * + * @hsotg: Pointer to struct dwc2_hsotg + * + * Must be called with interrupt disabled and spinlock held + */ +void dwc2_hcd_stop(struct dwc2_hsotg *hsotg) +{ + dev_dbg(hsotg->dev, "DWC OTG HCD STOP\n"); + + /* + * The root hub should be disconnected before this function is called. + * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) + * and the QH lists (via ..._hcd_endpoint_disable). + */ + + /* Turn off all host-specific interrupts */ + dwc2_disable_host_interrupts(hsotg); + + /* Turn off the vbus power */ + dev_dbg(hsotg->dev, "PortPower off\n"); + writel(0, hsotg->regs + HPRT0); +} + +static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg, + struct dwc2_hcd_urb *urb, void **ep_handle, + gfp_t mem_flags) +{ + struct dwc2_qtd *qtd; + unsigned long flags; + u32 intr_mask; + int retval; + int dev_speed; + + if (!hsotg->flags.b.port_connect_status) { + /* No longer connected */ + dev_err(hsotg->dev, "Not connected\n"); + return -ENODEV; + } + + dev_speed = dwc2_host_get_speed(hsotg, urb->priv); + + /* Some configurations cannot support LS traffic on a FS root port */ + if ((dev_speed == USB_SPEED_LOW) && + (hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) && + (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI)) { + u32 hprt0 = readl(hsotg->regs + HPRT0); + u32 prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; + + if (prtspd == HPRT0_SPD_FULL_SPEED) + return -ENODEV; + } + + qtd = kzalloc(sizeof(*qtd), mem_flags); + if (!qtd) + return -ENOMEM; + + dwc2_hcd_qtd_init(qtd, urb); + retval = dwc2_hcd_qtd_add(hsotg, qtd, (struct dwc2_qh **)ep_handle, + mem_flags); + if (retval) { + dev_err(hsotg->dev, + "DWC OTG HCD URB Enqueue failed adding QTD. Error status %d\n", + retval); + kfree(qtd); + return retval; + } + + intr_mask = readl(hsotg->regs + GINTMSK); + if (!(intr_mask & GINTSTS_SOF)) { + enum dwc2_transaction_type tr_type; + + if (qtd->qh->ep_type == USB_ENDPOINT_XFER_BULK && + !(qtd->urb->flags & URB_GIVEBACK_ASAP)) + /* + * Do not schedule SG transactions until qtd has + * URB_GIVEBACK_ASAP set + */ + return 0; + + spin_lock_irqsave(&hsotg->lock, flags); + tr_type = dwc2_hcd_select_transactions(hsotg); + if (tr_type != DWC2_TRANSACTION_NONE) + dwc2_hcd_queue_transactions(hsotg, tr_type); + spin_unlock_irqrestore(&hsotg->lock, flags); + } + + return 0; +} + +/* Must be called with interrupt disabled and spinlock held */ +static int dwc2_hcd_urb_dequeue(struct dwc2_hsotg *hsotg, + struct dwc2_hcd_urb *urb) +{ + struct dwc2_qh *qh; + struct dwc2_qtd *urb_qtd; + + urb_qtd = urb->qtd; + if (!urb_qtd) { + dev_dbg(hsotg->dev, "## Urb QTD is NULL ##\n"); + return -EINVAL; + } + + qh = urb_qtd->qh; + if (!qh) { + dev_dbg(hsotg->dev, "## Urb QTD QH is NULL ##\n"); + return -EINVAL; + } + + urb->priv = NULL; + + if (urb_qtd->in_process && qh->channel) { + dwc2_dump_channel_info(hsotg, qh->channel); + + /* The QTD is in process (it has been assigned to a channel) */ + if (hsotg->flags.b.port_connect_status) + /* + * If still connected (i.e. in host mode), halt the + * channel so it can be used for other transfers. If + * no longer connected, the host registers can't be + * written to halt the channel since the core is in + * device mode. + */ + dwc2_hc_halt(hsotg, qh->channel, + DWC2_HC_XFER_URB_DEQUEUE); + } + + /* + * Free the QTD and clean up the associated QH. Leave the QH in the + * schedule if it has any remaining QTDs. + */ + if (hsotg->core_params->dma_desc_enable <= 0) { + u8 in_process = urb_qtd->in_process; + + dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh); + if (in_process) { + dwc2_hcd_qh_deactivate(hsotg, qh, 0); + qh->channel = NULL; + } else if (list_empty(&qh->qtd_list)) { + dwc2_hcd_qh_unlink(hsotg, qh); + } + } else { + dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh); + } + + return 0; +} + +/* Must NOT be called with interrupt disabled or spinlock held */ +static int dwc2_hcd_endpoint_disable(struct dwc2_hsotg *hsotg, + struct usb_host_endpoint *ep, int retry) +{ + struct dwc2_qtd *qtd, *qtd_tmp; + struct dwc2_qh *qh; + unsigned long flags; + int rc; + + spin_lock_irqsave(&hsotg->lock, flags); + + qh = ep->hcpriv; + if (!qh) { + rc = -EINVAL; + goto err; + } + + while (!list_empty(&qh->qtd_list) && retry--) { + if (retry == 0) { + dev_err(hsotg->dev, + "## timeout in dwc2_hcd_endpoint_disable() ##\n"); + rc = -EBUSY; + goto err; + } + + spin_unlock_irqrestore(&hsotg->lock, flags); + usleep_range(20000, 40000); + spin_lock_irqsave(&hsotg->lock, flags); + qh = ep->hcpriv; + if (!qh) { + rc = -EINVAL; + goto err; + } + } + + dwc2_hcd_qh_unlink(hsotg, qh); + + /* Free each QTD in the QH's QTD list */ + list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); + + ep->hcpriv = NULL; + spin_unlock_irqrestore(&hsotg->lock, flags); + dwc2_hcd_qh_free(hsotg, qh); + + return 0; + +err: + ep->hcpriv = NULL; + spin_unlock_irqrestore(&hsotg->lock, flags); + + return rc; +} + +/* Must be called with interrupt disabled and spinlock held */ +static int dwc2_hcd_endpoint_reset(struct dwc2_hsotg *hsotg, + struct usb_host_endpoint *ep) +{ + struct dwc2_qh *qh = ep->hcpriv; + + if (!qh) + return -EINVAL; + + qh->data_toggle = DWC2_HC_PID_DATA0; + + return 0; +} + +/* + * Initializes dynamic portions of the DWC_otg HCD state + * + * Must be called with interrupt disabled and spinlock held + */ +static void dwc2_hcd_reinit(struct dwc2_hsotg *hsotg) +{ + struct dwc2_host_chan *chan, *chan_tmp; + int num_channels; + int i; + + hsotg->flags.d32 = 0; + hsotg->non_periodic_qh_ptr = &hsotg->non_periodic_sched_active; + + if (hsotg->core_params->uframe_sched > 0) { + hsotg->available_host_channels = + hsotg->core_params->host_channels; + } else { + hsotg->non_periodic_channels = 0; + hsotg->periodic_channels = 0; + } + + /* + * Put all channels in the free channel list and clean up channel + * states + */ + list_for_each_entry_safe(chan, chan_tmp, &hsotg->free_hc_list, + hc_list_entry) + list_del_init(&chan->hc_list_entry); + + num_channels = hsotg->core_params->host_channels; + for (i = 0; i < num_channels; i++) { + chan = hsotg->hc_ptr_array[i]; + list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list); + dwc2_hc_cleanup(hsotg, chan); + } + + /* Initialize the DWC core for host mode operation */ + dwc2_core_host_init(hsotg); +} + +static void dwc2_hc_init_split(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb) +{ + int hub_addr, hub_port; + + chan->do_split = 1; + chan->xact_pos = qtd->isoc_split_pos; + chan->complete_split = qtd->complete_split; + dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port); + chan->hub_addr = (u8)hub_addr; + chan->hub_port = (u8)hub_port; +} + +static void *dwc2_hc_init_xfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + struct dwc2_qtd *qtd, void *bufptr) +{ + struct dwc2_hcd_urb *urb = qtd->urb; + struct dwc2_hcd_iso_packet_desc *frame_desc; + + switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) { + case USB_ENDPOINT_XFER_CONTROL: + chan->ep_type = USB_ENDPOINT_XFER_CONTROL; + + switch (qtd->control_phase) { + case DWC2_CONTROL_SETUP: + dev_vdbg(hsotg->dev, " Control setup transaction\n"); + chan->do_ping = 0; + chan->ep_is_in = 0; + chan->data_pid_start = DWC2_HC_PID_SETUP; + if (hsotg->core_params->dma_enable > 0) + chan->xfer_dma = urb->setup_dma; + else + chan->xfer_buf = urb->setup_packet; + chan->xfer_len = 8; + bufptr = NULL; + break; + + case DWC2_CONTROL_DATA: + dev_vdbg(hsotg->dev, " Control data transaction\n"); + chan->data_pid_start = qtd->data_toggle; + break; + + case DWC2_CONTROL_STATUS: + /* + * Direction is opposite of data direction or IN if no + * data + */ + dev_vdbg(hsotg->dev, " Control status transaction\n"); + if (urb->length == 0) + chan->ep_is_in = 1; + else + chan->ep_is_in = + dwc2_hcd_is_pipe_out(&urb->pipe_info); + if (chan->ep_is_in) + chan->do_ping = 0; + chan->data_pid_start = DWC2_HC_PID_DATA1; + chan->xfer_len = 0; + if (hsotg->core_params->dma_enable > 0) + chan->xfer_dma = hsotg->status_buf_dma; + else + chan->xfer_buf = hsotg->status_buf; + bufptr = NULL; + break; + } + break; + + case USB_ENDPOINT_XFER_BULK: + chan->ep_type = USB_ENDPOINT_XFER_BULK; + break; + + case USB_ENDPOINT_XFER_INT: + chan->ep_type = USB_ENDPOINT_XFER_INT; + break; + + case USB_ENDPOINT_XFER_ISOC: + chan->ep_type = USB_ENDPOINT_XFER_ISOC; + if (hsotg->core_params->dma_desc_enable > 0) + break; + + frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; + frame_desc->status = 0; + + if (hsotg->core_params->dma_enable > 0) { + chan->xfer_dma = urb->dma; + chan->xfer_dma += frame_desc->offset + + qtd->isoc_split_offset; + } else { + chan->xfer_buf = urb->buf; + chan->xfer_buf += frame_desc->offset + + qtd->isoc_split_offset; + } + + chan->xfer_len = frame_desc->length - qtd->isoc_split_offset; + + /* For non-dword aligned buffers */ + if (hsotg->core_params->dma_enable > 0 && + (chan->xfer_dma & 0x3)) + bufptr = (u8 *)urb->buf + frame_desc->offset + + qtd->isoc_split_offset; + else + bufptr = NULL; + + if (chan->xact_pos == DWC2_HCSPLT_XACTPOS_ALL) { + if (chan->xfer_len <= 188) + chan->xact_pos = DWC2_HCSPLT_XACTPOS_ALL; + else + chan->xact_pos = DWC2_HCSPLT_XACTPOS_BEGIN; + } + break; + } + + return bufptr; +} + +static int dwc2_hc_setup_align_buf(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + struct dwc2_host_chan *chan, void *bufptr) +{ + u32 buf_size; + + if (chan->ep_type != USB_ENDPOINT_XFER_ISOC) + buf_size = hsotg->core_params->max_transfer_size; + else + buf_size = 4096; + + if (!qh->dw_align_buf) { + qh->dw_align_buf = dma_alloc_coherent(hsotg->dev, buf_size, + &qh->dw_align_buf_dma, + GFP_ATOMIC); + if (!qh->dw_align_buf) + return -ENOMEM; + } + + if (!chan->ep_is_in && chan->xfer_len) { + dma_sync_single_for_cpu(hsotg->dev, chan->xfer_dma, buf_size, + DMA_TO_DEVICE); + memcpy(qh->dw_align_buf, bufptr, chan->xfer_len); + dma_sync_single_for_device(hsotg->dev, chan->xfer_dma, buf_size, + DMA_TO_DEVICE); + } + + chan->align_buf = qh->dw_align_buf_dma; + return 0; +} + +/** + * dwc2_assign_and_init_hc() - Assigns transactions from a QTD to a free host + * channel and initializes the host channel to perform the transactions. The + * host channel is removed from the free list. + * + * @hsotg: The HCD state structure + * @qh: Transactions from the first QTD for this QH are selected and assigned + * to a free host channel + */ +static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + struct dwc2_host_chan *chan; + struct dwc2_hcd_urb *urb; + struct dwc2_qtd *qtd; + void *bufptr = NULL; + + if (dbg_qh(qh)) + dev_vdbg(hsotg->dev, "%s(%p,%p)\n", __func__, hsotg, qh); + + if (list_empty(&qh->qtd_list)) { + dev_dbg(hsotg->dev, "No QTDs in QH list\n"); + return -ENOMEM; + } + + if (list_empty(&hsotg->free_hc_list)) { + dev_dbg(hsotg->dev, "No free channel to assign\n"); + return -ENOMEM; + } + + chan = list_first_entry(&hsotg->free_hc_list, struct dwc2_host_chan, + hc_list_entry); + + /* Remove host channel from free list */ + list_del_init(&chan->hc_list_entry); + + qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry); + urb = qtd->urb; + qh->channel = chan; + qtd->in_process = 1; + + /* + * Use usb_pipedevice to determine device address. This address is + * 0 before the SET_ADDRESS command and the correct address afterward. + */ + chan->dev_addr = dwc2_hcd_get_dev_addr(&urb->pipe_info); + chan->ep_num = dwc2_hcd_get_ep_num(&urb->pipe_info); + chan->speed = qh->dev_speed; + chan->max_packet = dwc2_max_packet(qh->maxp); + + chan->xfer_started = 0; + chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS; + chan->error_state = (qtd->error_count > 0); + chan->halt_on_queue = 0; + chan->halt_pending = 0; + chan->requests = 0; + + /* + * The following values may be modified in the transfer type section + * below. The xfer_len value may be reduced when the transfer is + * started to accommodate the max widths of the XferSize and PktCnt + * fields in the HCTSIZn register. + */ + + chan->ep_is_in = (dwc2_hcd_is_pipe_in(&urb->pipe_info) != 0); + if (chan->ep_is_in) + chan->do_ping = 0; + else + chan->do_ping = qh->ping_state; + + chan->data_pid_start = qh->data_toggle; + chan->multi_count = 1; + + if (urb->actual_length > urb->length && + !dwc2_hcd_is_pipe_in(&urb->pipe_info)) + urb->actual_length = urb->length; + + if (hsotg->core_params->dma_enable > 0) { + chan->xfer_dma = urb->dma + urb->actual_length; + + /* For non-dword aligned case */ + if (hsotg->core_params->dma_desc_enable <= 0 && + (chan->xfer_dma & 0x3)) + bufptr = (u8 *)urb->buf + urb->actual_length; + } else { + chan->xfer_buf = (u8 *)urb->buf + urb->actual_length; + } + + chan->xfer_len = urb->length - urb->actual_length; + chan->xfer_count = 0; + + /* Set the split attributes if required */ + if (qh->do_split) + dwc2_hc_init_split(hsotg, chan, qtd, urb); + else + chan->do_split = 0; + + /* Set the transfer attributes */ + bufptr = dwc2_hc_init_xfer(hsotg, chan, qtd, bufptr); + + /* Non DWORD-aligned buffer case */ + if (bufptr) { + dev_vdbg(hsotg->dev, "Non-aligned buffer\n"); + if (dwc2_hc_setup_align_buf(hsotg, qh, chan, bufptr)) { + dev_err(hsotg->dev, + "%s: Failed to allocate memory to handle non-dword aligned buffer\n", + __func__); + /* Add channel back to free list */ + chan->align_buf = 0; + chan->multi_count = 0; + list_add_tail(&chan->hc_list_entry, + &hsotg->free_hc_list); + qtd->in_process = 0; + qh->channel = NULL; + return -ENOMEM; + } + } else { + chan->align_buf = 0; + } + + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) + /* + * This value may be modified when the transfer is started + * to reflect the actual transfer length + */ + chan->multi_count = dwc2_hb_mult(qh->maxp); + + if (hsotg->core_params->dma_desc_enable > 0) + chan->desc_list_addr = qh->desc_list_dma; + + dwc2_hc_init(hsotg, chan); + chan->qh = qh; + + return 0; +} + +/** + * dwc2_hcd_select_transactions() - Selects transactions from the HCD transfer + * schedule and assigns them to available host channels. Called from the HCD + * interrupt handler functions. + * + * @hsotg: The HCD state structure + * + * Return: The types of new transactions that were assigned to host channels + */ +enum dwc2_transaction_type dwc2_hcd_select_transactions( + struct dwc2_hsotg *hsotg) +{ + enum dwc2_transaction_type ret_val = DWC2_TRANSACTION_NONE; + struct list_head *qh_ptr; + struct dwc2_qh *qh; + int num_channels; + +#ifdef DWC2_DEBUG_SOF + dev_vdbg(hsotg->dev, " Select Transactions\n"); +#endif + + /* Process entries in the periodic ready list */ + qh_ptr = hsotg->periodic_sched_ready.next; + while (qh_ptr != &hsotg->periodic_sched_ready) { + if (list_empty(&hsotg->free_hc_list)) + break; + if (hsotg->core_params->uframe_sched > 0) { + if (hsotg->available_host_channels <= 1) + break; + hsotg->available_host_channels--; + } + qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); + if (dwc2_assign_and_init_hc(hsotg, qh)) + break; + + /* + * Move the QH from the periodic ready schedule to the + * periodic assigned schedule + */ + qh_ptr = qh_ptr->next; + list_move(&qh->qh_list_entry, &hsotg->periodic_sched_assigned); + ret_val = DWC2_TRANSACTION_PERIODIC; + } + + /* + * Process entries in the inactive portion of the non-periodic + * schedule. Some free host channels may not be used if they are + * reserved for periodic transfers. + */ + num_channels = hsotg->core_params->host_channels; + qh_ptr = hsotg->non_periodic_sched_inactive.next; + while (qh_ptr != &hsotg->non_periodic_sched_inactive) { + if (hsotg->core_params->uframe_sched <= 0 && + hsotg->non_periodic_channels >= num_channels - + hsotg->periodic_channels) + break; + if (list_empty(&hsotg->free_hc_list)) + break; + qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); + if (hsotg->core_params->uframe_sched > 0) { + if (hsotg->available_host_channels < 1) + break; + hsotg->available_host_channels--; + } + + if (dwc2_assign_and_init_hc(hsotg, qh)) + break; + + /* + * Move the QH from the non-periodic inactive schedule to the + * non-periodic active schedule + */ + qh_ptr = qh_ptr->next; + list_move(&qh->qh_list_entry, + &hsotg->non_periodic_sched_active); + + if (ret_val == DWC2_TRANSACTION_NONE) + ret_val = DWC2_TRANSACTION_NON_PERIODIC; + else + ret_val = DWC2_TRANSACTION_ALL; + + if (hsotg->core_params->uframe_sched <= 0) + hsotg->non_periodic_channels++; + } + + return ret_val; +} + +/** + * dwc2_queue_transaction() - Attempts to queue a single transaction request for + * a host channel associated with either a periodic or non-periodic transfer + * + * @hsotg: The HCD state structure + * @chan: Host channel descriptor associated with either a periodic or + * non-periodic transfer + * @fifo_dwords_avail: Number of DWORDs available in the periodic Tx FIFO + * for periodic transfers or the non-periodic Tx FIFO + * for non-periodic transfers + * + * Return: 1 if a request is queued and more requests may be needed to + * complete the transfer, 0 if no more requests are required for this + * transfer, -1 if there is insufficient space in the Tx FIFO + * + * This function assumes that there is space available in the appropriate + * request queue. For an OUT transfer or SETUP transaction in Slave mode, + * it checks whether space is available in the appropriate Tx FIFO. + * + * Must be called with interrupt disabled and spinlock held + */ +static int dwc2_queue_transaction(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + u16 fifo_dwords_avail) +{ + int retval = 0; + + if (hsotg->core_params->dma_enable > 0) { + if (hsotg->core_params->dma_desc_enable > 0) { + if (!chan->xfer_started || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) { + dwc2_hcd_start_xfer_ddma(hsotg, chan->qh); + chan->qh->ping_state = 0; + } + } else if (!chan->xfer_started) { + dwc2_hc_start_transfer(hsotg, chan); + chan->qh->ping_state = 0; + } + } else if (chan->halt_pending) { + /* Don't queue a request if the channel has been halted */ + } else if (chan->halt_on_queue) { + dwc2_hc_halt(hsotg, chan, chan->halt_status); + } else if (chan->do_ping) { + if (!chan->xfer_started) + dwc2_hc_start_transfer(hsotg, chan); + } else if (!chan->ep_is_in || + chan->data_pid_start == DWC2_HC_PID_SETUP) { + if ((fifo_dwords_avail * 4) >= chan->max_packet) { + if (!chan->xfer_started) { + dwc2_hc_start_transfer(hsotg, chan); + retval = 1; + } else { + retval = dwc2_hc_continue_transfer(hsotg, chan); + } + } else { + retval = -1; + } + } else { + if (!chan->xfer_started) { + dwc2_hc_start_transfer(hsotg, chan); + retval = 1; + } else { + retval = dwc2_hc_continue_transfer(hsotg, chan); + } + } + + return retval; +} + +/* + * Processes periodic channels for the next frame and queues transactions for + * these channels to the DWC_otg controller. After queueing transactions, the + * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions + * to queue as Periodic Tx FIFO or request queue space becomes available. + * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. + * + * Must be called with interrupt disabled and spinlock held + */ +static void dwc2_process_periodic_channels(struct dwc2_hsotg *hsotg) +{ + struct list_head *qh_ptr; + struct dwc2_qh *qh; + u32 tx_status; + u32 fspcavail; + u32 gintmsk; + int status; + int no_queue_space = 0; + int no_fifo_space = 0; + u32 qspcavail; + + if (dbg_perio()) + dev_vdbg(hsotg->dev, "Queue periodic transactions\n"); + + tx_status = readl(hsotg->regs + HPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> + TXSTS_FSPCAVAIL_SHIFT; + + if (dbg_perio()) { + dev_vdbg(hsotg->dev, " P Tx Req Queue Space Avail (before queue): %d\n", + qspcavail); + dev_vdbg(hsotg->dev, " P Tx FIFO Space Avail (before queue): %d\n", + fspcavail); + } + + qh_ptr = hsotg->periodic_sched_assigned.next; + while (qh_ptr != &hsotg->periodic_sched_assigned) { + tx_status = readl(hsotg->regs + HPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + if (qspcavail == 0) { + no_queue_space = 1; + break; + } + + qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); + if (!qh->channel) { + qh_ptr = qh_ptr->next; + continue; + } + + /* Make sure EP's TT buffer is clean before queueing qtds */ + if (qh->tt_buffer_dirty) { + qh_ptr = qh_ptr->next; + continue; + } + + /* + * Set a flag if we're queuing high-bandwidth in slave mode. + * The flag prevents any halts to get into the request queue in + * the middle of multiple high-bandwidth packets getting queued. + */ + if (hsotg->core_params->dma_enable <= 0 && + qh->channel->multi_count > 1) + hsotg->queuing_high_bandwidth = 1; + + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> + TXSTS_FSPCAVAIL_SHIFT; + status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail); + if (status < 0) { + no_fifo_space = 1; + break; + } + + /* + * In Slave mode, stay on the current transfer until there is + * nothing more to do or the high-bandwidth request count is + * reached. In DMA mode, only need to queue one request. The + * controller automatically handles multiple packets for + * high-bandwidth transfers. + */ + if (hsotg->core_params->dma_enable > 0 || status == 0 || + qh->channel->requests == qh->channel->multi_count) { + qh_ptr = qh_ptr->next; + /* + * Move the QH from the periodic assigned schedule to + * the periodic queued schedule + */ + list_move(&qh->qh_list_entry, + &hsotg->periodic_sched_queued); + + /* done queuing high bandwidth */ + hsotg->queuing_high_bandwidth = 0; + } + } + + if (hsotg->core_params->dma_enable <= 0) { + tx_status = readl(hsotg->regs + HPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> + TXSTS_FSPCAVAIL_SHIFT; + if (dbg_perio()) { + dev_vdbg(hsotg->dev, + " P Tx Req Queue Space Avail (after queue): %d\n", + qspcavail); + dev_vdbg(hsotg->dev, + " P Tx FIFO Space Avail (after queue): %d\n", + fspcavail); + } + + if (!list_empty(&hsotg->periodic_sched_assigned) || + no_queue_space || no_fifo_space) { + /* + * May need to queue more transactions as the request + * queue or Tx FIFO empties. Enable the periodic Tx + * FIFO empty interrupt. (Always use the half-empty + * level to ensure that new requests are loaded as + * soon as possible.) + */ + gintmsk = readl(hsotg->regs + GINTMSK); + gintmsk |= GINTSTS_PTXFEMP; + writel(gintmsk, hsotg->regs + GINTMSK); + } else { + /* + * Disable the Tx FIFO empty interrupt since there are + * no more transactions that need to be queued right + * now. This function is called from interrupt + * handlers to queue more transactions as transfer + * states change. + */ + gintmsk = readl(hsotg->regs + GINTMSK); + gintmsk &= ~GINTSTS_PTXFEMP; + writel(gintmsk, hsotg->regs + GINTMSK); + } + } +} + +/* + * Processes active non-periodic channels and queues transactions for these + * channels to the DWC_otg controller. After queueing transactions, the NP Tx + * FIFO Empty interrupt is enabled if there are more transactions to queue as + * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx + * FIFO Empty interrupt is disabled. + * + * Must be called with interrupt disabled and spinlock held + */ +static void dwc2_process_non_periodic_channels(struct dwc2_hsotg *hsotg) +{ + struct list_head *orig_qh_ptr; + struct dwc2_qh *qh; + u32 tx_status; + u32 qspcavail; + u32 fspcavail; + u32 gintmsk; + int status; + int no_queue_space = 0; + int no_fifo_space = 0; + int more_to_do = 0; + + dev_vdbg(hsotg->dev, "Queue non-periodic transactions\n"); + + tx_status = readl(hsotg->regs + GNPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> + TXSTS_FSPCAVAIL_SHIFT; + dev_vdbg(hsotg->dev, " NP Tx Req Queue Space Avail (before queue): %d\n", + qspcavail); + dev_vdbg(hsotg->dev, " NP Tx FIFO Space Avail (before queue): %d\n", + fspcavail); + + /* + * Keep track of the starting point. Skip over the start-of-list + * entry. + */ + if (hsotg->non_periodic_qh_ptr == &hsotg->non_periodic_sched_active) + hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next; + orig_qh_ptr = hsotg->non_periodic_qh_ptr; + + /* + * Process once through the active list or until no more space is + * available in the request queue or the Tx FIFO + */ + do { + tx_status = readl(hsotg->regs + GNPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + if (hsotg->core_params->dma_enable <= 0 && qspcavail == 0) { + no_queue_space = 1; + break; + } + + qh = list_entry(hsotg->non_periodic_qh_ptr, struct dwc2_qh, + qh_list_entry); + if (!qh->channel) + goto next; + + /* Make sure EP's TT buffer is clean before queueing qtds */ + if (qh->tt_buffer_dirty) + goto next; + + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> + TXSTS_FSPCAVAIL_SHIFT; + status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail); + + if (status > 0) { + more_to_do = 1; + } else if (status < 0) { + no_fifo_space = 1; + break; + } +next: + /* Advance to next QH, skipping start-of-list entry */ + hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next; + if (hsotg->non_periodic_qh_ptr == + &hsotg->non_periodic_sched_active) + hsotg->non_periodic_qh_ptr = + hsotg->non_periodic_qh_ptr->next; + } while (hsotg->non_periodic_qh_ptr != orig_qh_ptr); + + if (hsotg->core_params->dma_enable <= 0) { + tx_status = readl(hsotg->regs + GNPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> + TXSTS_FSPCAVAIL_SHIFT; + dev_vdbg(hsotg->dev, + " NP Tx Req Queue Space Avail (after queue): %d\n", + qspcavail); + dev_vdbg(hsotg->dev, + " NP Tx FIFO Space Avail (after queue): %d\n", + fspcavail); + + if (more_to_do || no_queue_space || no_fifo_space) { + /* + * May need to queue more transactions as the request + * queue or Tx FIFO empties. Enable the non-periodic + * Tx FIFO empty interrupt. (Always use the half-empty + * level to ensure that new requests are loaded as + * soon as possible.) + */ + gintmsk = readl(hsotg->regs + GINTMSK); + gintmsk |= GINTSTS_NPTXFEMP; + writel(gintmsk, hsotg->regs + GINTMSK); + } else { + /* + * Disable the Tx FIFO empty interrupt since there are + * no more transactions that need to be queued right + * now. This function is called from interrupt + * handlers to queue more transactions as transfer + * states change. + */ + gintmsk = readl(hsotg->regs + GINTMSK); + gintmsk &= ~GINTSTS_NPTXFEMP; + writel(gintmsk, hsotg->regs + GINTMSK); + } + } +} + +/** + * dwc2_hcd_queue_transactions() - Processes the currently active host channels + * and queues transactions for these channels to the DWC_otg controller. Called + * from the HCD interrupt handler functions. + * + * @hsotg: The HCD state structure + * @tr_type: The type(s) of transactions to queue (non-periodic, periodic, + * or both) + * + * Must be called with interrupt disabled and spinlock held + */ +void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg, + enum dwc2_transaction_type tr_type) +{ +#ifdef DWC2_DEBUG_SOF + dev_vdbg(hsotg->dev, "Queue Transactions\n"); +#endif + /* Process host channels associated with periodic transfers */ + if ((tr_type == DWC2_TRANSACTION_PERIODIC || + tr_type == DWC2_TRANSACTION_ALL) && + !list_empty(&hsotg->periodic_sched_assigned)) + dwc2_process_periodic_channels(hsotg); + + /* Process host channels associated with non-periodic transfers */ + if (tr_type == DWC2_TRANSACTION_NON_PERIODIC || + tr_type == DWC2_TRANSACTION_ALL) { + if (!list_empty(&hsotg->non_periodic_sched_active)) { + dwc2_process_non_periodic_channels(hsotg); + } else { + /* + * Ensure NP Tx FIFO empty interrupt is disabled when + * there are no non-periodic transfers to process + */ + u32 gintmsk = readl(hsotg->regs + GINTMSK); + + gintmsk &= ~GINTSTS_NPTXFEMP; + writel(gintmsk, hsotg->regs + GINTMSK); + } + } +} + +static void dwc2_conn_id_status_change(struct work_struct *work) +{ + struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, + wf_otg); + u32 count = 0; + u32 gotgctl; + + dev_dbg(hsotg->dev, "%s()\n", __func__); + + gotgctl = readl(hsotg->regs + GOTGCTL); + dev_dbg(hsotg->dev, "gotgctl=%0x\n", gotgctl); + dev_dbg(hsotg->dev, "gotgctl.b.conidsts=%d\n", + !!(gotgctl & GOTGCTL_CONID_B)); + + /* B-Device connector (Device Mode) */ + if (gotgctl & GOTGCTL_CONID_B) { + /* Wait for switch to device mode */ + dev_dbg(hsotg->dev, "connId B\n"); + while (!dwc2_is_device_mode(hsotg)) { + dev_info(hsotg->dev, + "Waiting for Peripheral Mode, Mode=%s\n", + dwc2_is_host_mode(hsotg) ? "Host" : + "Peripheral"); + usleep_range(20000, 40000); + if (++count > 250) + break; + } + if (count > 250) + dev_err(hsotg->dev, + "Connection id status change timed out\n"); + hsotg->op_state = OTG_STATE_B_PERIPHERAL; + dwc2_core_init(hsotg, false, -1); + dwc2_enable_global_interrupts(hsotg); + } else { + /* A-Device connector (Host Mode) */ + dev_dbg(hsotg->dev, "connId A\n"); + while (!dwc2_is_host_mode(hsotg)) { + dev_info(hsotg->dev, "Waiting for Host Mode, Mode=%s\n", + dwc2_is_host_mode(hsotg) ? + "Host" : "Peripheral"); + usleep_range(20000, 40000); + if (++count > 250) + break; + } + if (count > 250) + dev_err(hsotg->dev, + "Connection id status change timed out\n"); + hsotg->op_state = OTG_STATE_A_HOST; + + /* Initialize the Core for Host mode */ + dwc2_core_init(hsotg, false, -1); + dwc2_enable_global_interrupts(hsotg); + dwc2_hcd_start(hsotg); + } +} + +static void dwc2_wakeup_detected(unsigned long data) +{ + struct dwc2_hsotg *hsotg = (struct dwc2_hsotg *)data; + u32 hprt0; + + dev_dbg(hsotg->dev, "%s()\n", __func__); + + /* + * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms + * so that OPT tests pass with all PHYs.) + */ + hprt0 = dwc2_read_hprt0(hsotg); + dev_dbg(hsotg->dev, "Resume: HPRT0=%0x\n", hprt0); + hprt0 &= ~HPRT0_RES; + writel(hprt0, hsotg->regs + HPRT0); + dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n", + readl(hsotg->regs + HPRT0)); + + dwc2_hcd_rem_wakeup(hsotg); + + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; +} + +static int dwc2_host_is_b_hnp_enabled(struct dwc2_hsotg *hsotg) +{ + struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); + + return hcd->self.b_hnp_enable; +} + +/* Must NOT be called with interrupt disabled or spinlock held */ +static void dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex) +{ + unsigned long flags; + u32 hprt0; + u32 pcgctl; + u32 gotgctl; + + dev_dbg(hsotg->dev, "%s()\n", __func__); + + spin_lock_irqsave(&hsotg->lock, flags); + + if (windex == hsotg->otg_port && dwc2_host_is_b_hnp_enabled(hsotg)) { + gotgctl = readl(hsotg->regs + GOTGCTL); + gotgctl |= GOTGCTL_HSTSETHNPEN; + writel(gotgctl, hsotg->regs + GOTGCTL); + hsotg->op_state = OTG_STATE_A_SUSPEND; + } + + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_SUSP; + writel(hprt0, hsotg->regs + HPRT0); + + /* Update lx_state */ + hsotg->lx_state = DWC2_L2; + + /* Suspend the Phy Clock */ + pcgctl = readl(hsotg->regs + PCGCTL); + pcgctl |= PCGCTL_STOPPCLK; + writel(pcgctl, hsotg->regs + PCGCTL); + udelay(10); + + /* For HNP the bus must be suspended for at least 200ms */ + if (dwc2_host_is_b_hnp_enabled(hsotg)) { + pcgctl = readl(hsotg->regs + PCGCTL); + pcgctl &= ~PCGCTL_STOPPCLK; + writel(pcgctl, hsotg->regs + PCGCTL); + + spin_unlock_irqrestore(&hsotg->lock, flags); + + usleep_range(200000, 250000); + } else { + spin_unlock_irqrestore(&hsotg->lock, flags); + } +} + +/* Handles hub class-specific requests */ +static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, + u16 wvalue, u16 windex, char *buf, u16 wlength) +{ + struct usb_hub_descriptor *hub_desc; + int retval = 0; + u32 hprt0; + u32 port_status; + u32 speed; + u32 pcgctl; + + switch (typereq) { + case ClearHubFeature: + dev_dbg(hsotg->dev, "ClearHubFeature %1xh\n", wvalue); + + switch (wvalue) { + case C_HUB_LOCAL_POWER: + case C_HUB_OVER_CURRENT: + /* Nothing required here */ + break; + + default: + retval = -EINVAL; + dev_err(hsotg->dev, + "ClearHubFeature request %1xh unknown\n", + wvalue); + } + break; + + case ClearPortFeature: + if (wvalue != USB_PORT_FEAT_L1) + if (!windex || windex > 1) + goto error; + switch (wvalue) { + case USB_PORT_FEAT_ENABLE: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_ENA; + writel(hprt0, hsotg->regs + HPRT0); + break; + + case USB_PORT_FEAT_SUSPEND: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); + writel(0, hsotg->regs + PCGCTL); + usleep_range(20000, 40000); + + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_RES; + writel(hprt0, hsotg->regs + HPRT0); + hprt0 &= ~HPRT0_SUSP; + usleep_range(100000, 150000); + + hprt0 &= ~HPRT0_RES; + writel(hprt0, hsotg->regs + HPRT0); + break; + + case USB_PORT_FEAT_POWER: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_POWER\n"); + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 &= ~HPRT0_PWR; + writel(hprt0, hsotg->regs + HPRT0); + break; + + case USB_PORT_FEAT_INDICATOR: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); + /* Port indicator not supported */ + break; + + case USB_PORT_FEAT_C_CONNECTION: + /* + * Clears driver's internal Connect Status Change flag + */ + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); + hsotg->flags.b.port_connect_status_change = 0; + break; + + case USB_PORT_FEAT_C_RESET: + /* Clears driver's internal Port Reset Change flag */ + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); + hsotg->flags.b.port_reset_change = 0; + break; + + case USB_PORT_FEAT_C_ENABLE: + /* + * Clears the driver's internal Port Enable/Disable + * Change flag + */ + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); + hsotg->flags.b.port_enable_change = 0; + break; + + case USB_PORT_FEAT_C_SUSPEND: + /* + * Clears the driver's internal Port Suspend Change + * flag, which is set when resume signaling on the host + * port is complete + */ + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); + hsotg->flags.b.port_suspend_change = 0; + break; + + case USB_PORT_FEAT_C_PORT_L1: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_C_PORT_L1\n"); + hsotg->flags.b.port_l1_change = 0; + break; + + case USB_PORT_FEAT_C_OVER_CURRENT: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); + hsotg->flags.b.port_over_current_change = 0; + break; + + default: + retval = -EINVAL; + dev_err(hsotg->dev, + "ClearPortFeature request %1xh unknown or unsupported\n", + wvalue); + } + break; + + case GetHubDescriptor: + dev_dbg(hsotg->dev, "GetHubDescriptor\n"); + hub_desc = (struct usb_hub_descriptor *)buf; + hub_desc->bDescLength = 9; + hub_desc->bDescriptorType = 0x29; + hub_desc->bNbrPorts = 1; + hub_desc->wHubCharacteristics = cpu_to_le16(0x08); + hub_desc->bPwrOn2PwrGood = 1; + hub_desc->bHubContrCurrent = 0; + hub_desc->u.hs.DeviceRemovable[0] = 0; + hub_desc->u.hs.DeviceRemovable[1] = 0xff; + break; + + case GetHubStatus: + dev_dbg(hsotg->dev, "GetHubStatus\n"); + memset(buf, 0, 4); + break; + + case GetPortStatus: + dev_vdbg(hsotg->dev, + "GetPortStatus wIndex=0x%04x flags=0x%08x\n", windex, + hsotg->flags.d32); + if (!windex || windex > 1) + goto error; + + port_status = 0; + if (hsotg->flags.b.port_connect_status_change) + port_status |= USB_PORT_STAT_C_CONNECTION << 16; + if (hsotg->flags.b.port_enable_change) + port_status |= USB_PORT_STAT_C_ENABLE << 16; + if (hsotg->flags.b.port_suspend_change) + port_status |= USB_PORT_STAT_C_SUSPEND << 16; + if (hsotg->flags.b.port_l1_change) + port_status |= USB_PORT_STAT_C_L1 << 16; + if (hsotg->flags.b.port_reset_change) + port_status |= USB_PORT_STAT_C_RESET << 16; + if (hsotg->flags.b.port_over_current_change) { + dev_warn(hsotg->dev, "Overcurrent change detected\n"); + port_status |= USB_PORT_STAT_C_OVERCURRENT << 16; + } + + if (!hsotg->flags.b.port_connect_status) { + /* + * The port is disconnected, which means the core is + * either in device mode or it soon will be. Just + * return 0's for the remainder of the port status + * since the port register can't be read if the core + * is in device mode. + */ + *(__le32 *)buf = cpu_to_le32(port_status); + break; + } + + hprt0 = readl(hsotg->regs + HPRT0); + dev_vdbg(hsotg->dev, " HPRT0: 0x%08x\n", hprt0); + + if (hprt0 & HPRT0_CONNSTS) + port_status |= USB_PORT_STAT_CONNECTION; + if (hprt0 & HPRT0_ENA) + port_status |= USB_PORT_STAT_ENABLE; + if (hprt0 & HPRT0_SUSP) + port_status |= USB_PORT_STAT_SUSPEND; + if (hprt0 & HPRT0_OVRCURRACT) + port_status |= USB_PORT_STAT_OVERCURRENT; + if (hprt0 & HPRT0_RST) + port_status |= USB_PORT_STAT_RESET; + if (hprt0 & HPRT0_PWR) + port_status |= USB_PORT_STAT_POWER; + + speed = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; + if (speed == HPRT0_SPD_HIGH_SPEED) + port_status |= USB_PORT_STAT_HIGH_SPEED; + else if (speed == HPRT0_SPD_LOW_SPEED) + port_status |= USB_PORT_STAT_LOW_SPEED; + + if (hprt0 & HPRT0_TSTCTL_MASK) + port_status |= USB_PORT_STAT_TEST; + /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ + + dev_vdbg(hsotg->dev, "port_status=%08x\n", port_status); + *(__le32 *)buf = cpu_to_le32(port_status); + break; + + case SetHubFeature: + dev_dbg(hsotg->dev, "SetHubFeature\n"); + /* No HUB features supported */ + break; + + case SetPortFeature: + dev_dbg(hsotg->dev, "SetPortFeature\n"); + if (wvalue != USB_PORT_FEAT_TEST && (!windex || windex > 1)) + goto error; + + if (!hsotg->flags.b.port_connect_status) { + /* + * The port is disconnected, which means the core is + * either in device mode or it soon will be. Just + * return without doing anything since the port + * register can't be written if the core is in device + * mode. + */ + break; + } + + switch (wvalue) { + case USB_PORT_FEAT_SUSPEND: + dev_dbg(hsotg->dev, + "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); + if (windex != hsotg->otg_port) + goto error; + dwc2_port_suspend(hsotg, windex); + break; + + case USB_PORT_FEAT_POWER: + dev_dbg(hsotg->dev, + "SetPortFeature - USB_PORT_FEAT_POWER\n"); + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_PWR; + writel(hprt0, hsotg->regs + HPRT0); + break; + + case USB_PORT_FEAT_RESET: + hprt0 = dwc2_read_hprt0(hsotg); + dev_dbg(hsotg->dev, + "SetPortFeature - USB_PORT_FEAT_RESET\n"); + pcgctl = readl(hsotg->regs + PCGCTL); + pcgctl &= ~(PCGCTL_ENBL_SLEEP_GATING | PCGCTL_STOPPCLK); + writel(pcgctl, hsotg->regs + PCGCTL); + /* ??? Original driver does this */ + writel(0, hsotg->regs + PCGCTL); + + hprt0 = dwc2_read_hprt0(hsotg); + /* Clear suspend bit if resetting from suspend state */ + hprt0 &= ~HPRT0_SUSP; + + /* + * When B-Host the Port reset bit is set in the Start + * HCD Callback function, so that the reset is started + * within 1ms of the HNP success interrupt + */ + if (!dwc2_hcd_is_b_host(hsotg)) { + hprt0 |= HPRT0_PWR | HPRT0_RST; + dev_dbg(hsotg->dev, + "In host mode, hprt0=%08x\n", hprt0); + writel(hprt0, hsotg->regs + HPRT0); + } + + /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ + usleep_range(50000, 70000); + hprt0 &= ~HPRT0_RST; + writel(hprt0, hsotg->regs + HPRT0); + hsotg->lx_state = DWC2_L0; /* Now back to On state */ + break; + + case USB_PORT_FEAT_INDICATOR: + dev_dbg(hsotg->dev, + "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); + /* Not supported */ + break; + + default: + retval = -EINVAL; + dev_err(hsotg->dev, + "SetPortFeature %1xh unknown or unsupported\n", + wvalue); + break; + } + break; + + default: +error: + retval = -EINVAL; + dev_dbg(hsotg->dev, + "Unknown hub control request: %1xh wIndex: %1xh wValue: %1xh\n", + typereq, windex, wvalue); + break; + } + + return retval; +} + +static int dwc2_hcd_is_status_changed(struct dwc2_hsotg *hsotg, int port) +{ + int retval; + + if (port != 1) + return -EINVAL; + + retval = (hsotg->flags.b.port_connect_status_change || + hsotg->flags.b.port_reset_change || + hsotg->flags.b.port_enable_change || + hsotg->flags.b.port_suspend_change || + hsotg->flags.b.port_over_current_change); + + if (retval) { + dev_dbg(hsotg->dev, + "DWC OTG HCD HUB STATUS DATA: Root port status changed\n"); + dev_dbg(hsotg->dev, " port_connect_status_change: %d\n", + hsotg->flags.b.port_connect_status_change); + dev_dbg(hsotg->dev, " port_reset_change: %d\n", + hsotg->flags.b.port_reset_change); + dev_dbg(hsotg->dev, " port_enable_change: %d\n", + hsotg->flags.b.port_enable_change); + dev_dbg(hsotg->dev, " port_suspend_change: %d\n", + hsotg->flags.b.port_suspend_change); + dev_dbg(hsotg->dev, " port_over_current_change: %d\n", + hsotg->flags.b.port_over_current_change); + } + + return retval; +} + +int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg) +{ + u32 hfnum = readl(hsotg->regs + HFNUM); + +#ifdef DWC2_DEBUG_SOF + dev_vdbg(hsotg->dev, "DWC OTG HCD GET FRAME NUMBER %d\n", + (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT); +#endif + return (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; +} + +int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg) +{ + return hsotg->op_state == OTG_STATE_B_HOST; +} + +static struct dwc2_hcd_urb *dwc2_hcd_urb_alloc(struct dwc2_hsotg *hsotg, + int iso_desc_count, + gfp_t mem_flags) +{ + struct dwc2_hcd_urb *urb; + u32 size = sizeof(*urb) + iso_desc_count * + sizeof(struct dwc2_hcd_iso_packet_desc); + + urb = kzalloc(size, mem_flags); + if (urb) + urb->packet_count = iso_desc_count; + return urb; +} + +static void dwc2_hcd_urb_set_pipeinfo(struct dwc2_hsotg *hsotg, + struct dwc2_hcd_urb *urb, u8 dev_addr, + u8 ep_num, u8 ep_type, u8 ep_dir, u16 mps) +{ + if (dbg_perio() || + ep_type == USB_ENDPOINT_XFER_BULK || + ep_type == USB_ENDPOINT_XFER_CONTROL) + dev_vdbg(hsotg->dev, + "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, mps=%d\n", + dev_addr, ep_num, ep_dir, ep_type, mps); + urb->pipe_info.dev_addr = dev_addr; + urb->pipe_info.ep_num = ep_num; + urb->pipe_info.pipe_type = ep_type; + urb->pipe_info.pipe_dir = ep_dir; + urb->pipe_info.mps = mps; +} + +/* + * NOTE: This function will be removed once the peripheral controller code + * is integrated and the driver is stable + */ +void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg) +{ +#ifdef DEBUG + struct dwc2_host_chan *chan; + struct dwc2_hcd_urb *urb; + struct dwc2_qtd *qtd; + int num_channels; + u32 np_tx_status; + u32 p_tx_status; + int i; + + num_channels = hsotg->core_params->host_channels; + dev_dbg(hsotg->dev, "\n"); + dev_dbg(hsotg->dev, + "************************************************************\n"); + dev_dbg(hsotg->dev, "HCD State:\n"); + dev_dbg(hsotg->dev, " Num channels: %d\n", num_channels); + + for (i = 0; i < num_channels; i++) { + chan = hsotg->hc_ptr_array[i]; + dev_dbg(hsotg->dev, " Channel %d:\n", i); + dev_dbg(hsotg->dev, + " dev_addr: %d, ep_num: %d, ep_is_in: %d\n", + chan->dev_addr, chan->ep_num, chan->ep_is_in); + dev_dbg(hsotg->dev, " speed: %d\n", chan->speed); + dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type); + dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet); + dev_dbg(hsotg->dev, " data_pid_start: %d\n", + chan->data_pid_start); + dev_dbg(hsotg->dev, " multi_count: %d\n", chan->multi_count); + dev_dbg(hsotg->dev, " xfer_started: %d\n", + chan->xfer_started); + dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf); + dev_dbg(hsotg->dev, " xfer_dma: %08lx\n", + (unsigned long)chan->xfer_dma); + dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len); + dev_dbg(hsotg->dev, " xfer_count: %d\n", chan->xfer_count); + dev_dbg(hsotg->dev, " halt_on_queue: %d\n", + chan->halt_on_queue); + dev_dbg(hsotg->dev, " halt_pending: %d\n", + chan->halt_pending); + dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status); + dev_dbg(hsotg->dev, " do_split: %d\n", chan->do_split); + dev_dbg(hsotg->dev, " complete_split: %d\n", + chan->complete_split); + dev_dbg(hsotg->dev, " hub_addr: %d\n", chan->hub_addr); + dev_dbg(hsotg->dev, " hub_port: %d\n", chan->hub_port); + dev_dbg(hsotg->dev, " xact_pos: %d\n", chan->xact_pos); + dev_dbg(hsotg->dev, " requests: %d\n", chan->requests); + dev_dbg(hsotg->dev, " qh: %p\n", chan->qh); + + if (chan->xfer_started) { + u32 hfnum, hcchar, hctsiz, hcint, hcintmsk; + + hfnum = readl(hsotg->regs + HFNUM); + hcchar = readl(hsotg->regs + HCCHAR(i)); + hctsiz = readl(hsotg->regs + HCTSIZ(i)); + hcint = readl(hsotg->regs + HCINT(i)); + hcintmsk = readl(hsotg->regs + HCINTMSK(i)); + dev_dbg(hsotg->dev, " hfnum: 0x%08x\n", hfnum); + dev_dbg(hsotg->dev, " hcchar: 0x%08x\n", hcchar); + dev_dbg(hsotg->dev, " hctsiz: 0x%08x\n", hctsiz); + dev_dbg(hsotg->dev, " hcint: 0x%08x\n", hcint); + dev_dbg(hsotg->dev, " hcintmsk: 0x%08x\n", hcintmsk); + } + + if (!(chan->xfer_started && chan->qh)) + continue; + + list_for_each_entry(qtd, &chan->qh->qtd_list, qtd_list_entry) { + if (!qtd->in_process) + break; + urb = qtd->urb; + dev_dbg(hsotg->dev, " URB Info:\n"); + dev_dbg(hsotg->dev, " qtd: %p, urb: %p\n", + qtd, urb); + if (urb) { + dev_dbg(hsotg->dev, + " Dev: %d, EP: %d %s\n", + dwc2_hcd_get_dev_addr(&urb->pipe_info), + dwc2_hcd_get_ep_num(&urb->pipe_info), + dwc2_hcd_is_pipe_in(&urb->pipe_info) ? + "IN" : "OUT"); + dev_dbg(hsotg->dev, + " Max packet size: %d\n", + dwc2_hcd_get_mps(&urb->pipe_info)); + dev_dbg(hsotg->dev, + " transfer_buffer: %p\n", + urb->buf); + dev_dbg(hsotg->dev, + " transfer_dma: %08lx\n", + (unsigned long)urb->dma); + dev_dbg(hsotg->dev, + " transfer_buffer_length: %d\n", + urb->length); + dev_dbg(hsotg->dev, " actual_length: %d\n", + urb->actual_length); + } + } + } + + dev_dbg(hsotg->dev, " non_periodic_channels: %d\n", + hsotg->non_periodic_channels); + dev_dbg(hsotg->dev, " periodic_channels: %d\n", + hsotg->periodic_channels); + dev_dbg(hsotg->dev, " periodic_usecs: %d\n", hsotg->periodic_usecs); + np_tx_status = readl(hsotg->regs + GNPTXSTS); + dev_dbg(hsotg->dev, " NP Tx Req Queue Space Avail: %d\n", + (np_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT); + dev_dbg(hsotg->dev, " NP Tx FIFO Space Avail: %d\n", + (np_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT); + p_tx_status = readl(hsotg->regs + HPTXSTS); + dev_dbg(hsotg->dev, " P Tx Req Queue Space Avail: %d\n", + (p_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT); + dev_dbg(hsotg->dev, " P Tx FIFO Space Avail: %d\n", + (p_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT); + dwc2_hcd_dump_frrem(hsotg); + dwc2_dump_global_registers(hsotg); + dwc2_dump_host_registers(hsotg); + dev_dbg(hsotg->dev, + "************************************************************\n"); + dev_dbg(hsotg->dev, "\n"); +#endif +} + +/* + * NOTE: This function will be removed once the peripheral controller code + * is integrated and the driver is stable + */ +void dwc2_hcd_dump_frrem(struct dwc2_hsotg *hsotg) +{ +#ifdef DWC2_DUMP_FRREM + dev_dbg(hsotg->dev, "Frame remaining at SOF:\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->frrem_samples, hsotg->frrem_accum, + hsotg->frrem_samples > 0 ? + hsotg->frrem_accum / hsotg->frrem_samples : 0); + dev_dbg(hsotg->dev, "\n"); + dev_dbg(hsotg->dev, "Frame remaining at start_transfer (uframe 7):\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->hfnum_7_samples, + hsotg->hfnum_7_frrem_accum, + hsotg->hfnum_7_samples > 0 ? + hsotg->hfnum_7_frrem_accum / hsotg->hfnum_7_samples : 0); + dev_dbg(hsotg->dev, "Frame remaining at start_transfer (uframe 0):\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->hfnum_0_samples, + hsotg->hfnum_0_frrem_accum, + hsotg->hfnum_0_samples > 0 ? + hsotg->hfnum_0_frrem_accum / hsotg->hfnum_0_samples : 0); + dev_dbg(hsotg->dev, "Frame remaining at start_transfer (uframe 1-6):\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->hfnum_other_samples, + hsotg->hfnum_other_frrem_accum, + hsotg->hfnum_other_samples > 0 ? + hsotg->hfnum_other_frrem_accum / hsotg->hfnum_other_samples : + 0); + dev_dbg(hsotg->dev, "\n"); + dev_dbg(hsotg->dev, "Frame remaining at sample point A (uframe 7):\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->hfnum_7_samples_a, hsotg->hfnum_7_frrem_accum_a, + hsotg->hfnum_7_samples_a > 0 ? + hsotg->hfnum_7_frrem_accum_a / hsotg->hfnum_7_samples_a : 0); + dev_dbg(hsotg->dev, "Frame remaining at sample point A (uframe 0):\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->hfnum_0_samples_a, hsotg->hfnum_0_frrem_accum_a, + hsotg->hfnum_0_samples_a > 0 ? + hsotg->hfnum_0_frrem_accum_a / hsotg->hfnum_0_samples_a : 0); + dev_dbg(hsotg->dev, "Frame remaining at sample point A (uframe 1-6):\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->hfnum_other_samples_a, hsotg->hfnum_other_frrem_accum_a, + hsotg->hfnum_other_samples_a > 0 ? + hsotg->hfnum_other_frrem_accum_a / hsotg->hfnum_other_samples_a + : 0); + dev_dbg(hsotg->dev, "\n"); + dev_dbg(hsotg->dev, "Frame remaining at sample point B (uframe 7):\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->hfnum_7_samples_b, hsotg->hfnum_7_frrem_accum_b, + hsotg->hfnum_7_samples_b > 0 ? + hsotg->hfnum_7_frrem_accum_b / hsotg->hfnum_7_samples_b : 0); + dev_dbg(hsotg->dev, "Frame remaining at sample point B (uframe 0):\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->hfnum_0_samples_b, hsotg->hfnum_0_frrem_accum_b, + (hsotg->hfnum_0_samples_b > 0) ? + hsotg->hfnum_0_frrem_accum_b / hsotg->hfnum_0_samples_b : 0); + dev_dbg(hsotg->dev, "Frame remaining at sample point B (uframe 1-6):\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->hfnum_other_samples_b, hsotg->hfnum_other_frrem_accum_b, + (hsotg->hfnum_other_samples_b > 0) ? + hsotg->hfnum_other_frrem_accum_b / hsotg->hfnum_other_samples_b + : 0); +#endif +} + +struct wrapper_priv_data { + struct dwc2_hsotg *hsotg; +}; + +/* Gets the dwc2_hsotg from a usb_hcd */ +static struct dwc2_hsotg *dwc2_hcd_to_hsotg(struct usb_hcd *hcd) +{ + struct wrapper_priv_data *p; + + p = (struct wrapper_priv_data *) &hcd->hcd_priv; + return p->hsotg; +} + +static int _dwc2_hcd_start(struct usb_hcd *hcd); + +void dwc2_host_start(struct dwc2_hsotg *hsotg) +{ + struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); + + hcd->self.is_b_host = dwc2_hcd_is_b_host(hsotg); + _dwc2_hcd_start(hcd); +} + +void dwc2_host_disconnect(struct dwc2_hsotg *hsotg) +{ + struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); + + hcd->self.is_b_host = 0; +} + +void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context, int *hub_addr, + int *hub_port) +{ + struct urb *urb = context; + + if (urb->dev->tt) + *hub_addr = urb->dev->tt->hub->devnum; + else + *hub_addr = 0; + *hub_port = urb->dev->ttport; +} + +int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context) +{ + struct urb *urb = context; + + return urb->dev->speed; +} + +static void dwc2_allocate_bus_bandwidth(struct usb_hcd *hcd, u16 bw, + struct urb *urb) +{ + struct usb_bus *bus = hcd_to_bus(hcd); + + if (urb->interval) + bus->bandwidth_allocated += bw / urb->interval; + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) + bus->bandwidth_isoc_reqs++; + else + bus->bandwidth_int_reqs++; +} + +static void dwc2_free_bus_bandwidth(struct usb_hcd *hcd, u16 bw, + struct urb *urb) +{ + struct usb_bus *bus = hcd_to_bus(hcd); + + if (urb->interval) + bus->bandwidth_allocated -= bw / urb->interval; + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) + bus->bandwidth_isoc_reqs--; + else + bus->bandwidth_int_reqs--; +} + +/* + * Sets the final status of an URB and returns it to the upper layer. Any + * required cleanup of the URB is performed. + * + * Must be called with interrupt disabled and spinlock held + */ +void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd, + int status) +{ + struct urb *urb; + int i; + + if (!qtd) { + dev_dbg(hsotg->dev, "## %s: qtd is NULL ##\n", __func__); + return; + } + + if (!qtd->urb) { + dev_dbg(hsotg->dev, "## %s: qtd->urb is NULL ##\n", __func__); + return; + } + + urb = qtd->urb->priv; + if (!urb) { + dev_dbg(hsotg->dev, "## %s: urb->priv is NULL ##\n", __func__); + return; + } + + urb->actual_length = dwc2_hcd_urb_get_actual_length(qtd->urb); + + if (dbg_urb(urb)) + dev_vdbg(hsotg->dev, + "%s: urb %p device %d ep %d-%s status %d actual %d\n", + __func__, urb, usb_pipedevice(urb->pipe), + usb_pipeendpoint(urb->pipe), + usb_pipein(urb->pipe) ? "IN" : "OUT", status, + urb->actual_length); + + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS && dbg_perio()) { + for (i = 0; i < urb->number_of_packets; i++) + dev_vdbg(hsotg->dev, " ISO Desc %d status %d\n", + i, urb->iso_frame_desc[i].status); + } + + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + urb->error_count = dwc2_hcd_urb_get_error_count(qtd->urb); + for (i = 0; i < urb->number_of_packets; ++i) { + urb->iso_frame_desc[i].actual_length = + dwc2_hcd_urb_get_iso_desc_actual_length( + qtd->urb, i); + urb->iso_frame_desc[i].status = + dwc2_hcd_urb_get_iso_desc_status(qtd->urb, i); + } + } + + urb->status = status; + if (!status) { + if ((urb->transfer_flags & URB_SHORT_NOT_OK) && + urb->actual_length < urb->transfer_buffer_length) + urb->status = -EREMOTEIO; + } + + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS || + usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { + struct usb_host_endpoint *ep = urb->ep; + + if (ep) + dwc2_free_bus_bandwidth(dwc2_hsotg_to_hcd(hsotg), + dwc2_hcd_get_ep_bandwidth(hsotg, ep), + urb); + } + + usb_hcd_unlink_urb_from_ep(dwc2_hsotg_to_hcd(hsotg), urb); + urb->hcpriv = NULL; + kfree(qtd->urb); + qtd->urb = NULL; + + spin_unlock(&hsotg->lock); + usb_hcd_giveback_urb(dwc2_hsotg_to_hcd(hsotg), urb, status); + spin_lock(&hsotg->lock); +} + +/* + * Work queue function for starting the HCD when A-Cable is connected + */ +static void dwc2_hcd_start_func(struct work_struct *work) +{ + struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, + start_work.work); + + dev_dbg(hsotg->dev, "%s() %p\n", __func__, hsotg); + dwc2_host_start(hsotg); +} + +/* + * Reset work queue function + */ +static void dwc2_hcd_reset_func(struct work_struct *work) +{ + struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, + reset_work.work); + u32 hprt0; + + dev_dbg(hsotg->dev, "USB RESET function called\n"); + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 &= ~HPRT0_RST; + writel(hprt0, hsotg->regs + HPRT0); + hsotg->flags.b.port_reset_change = 1; +} + +/* + * ========================================================================= + * Linux HC Driver Functions + * ========================================================================= + */ + +/* + * Initializes the DWC_otg controller and its root hub and prepares it for host + * mode operation. Activates the root port. Returns 0 on success and a negative + * error code on failure. + */ +static int _dwc2_hcd_start(struct usb_hcd *hcd) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + struct usb_bus *bus = hcd_to_bus(hcd); + unsigned long flags; + + dev_dbg(hsotg->dev, "DWC OTG HCD START\n"); + + spin_lock_irqsave(&hsotg->lock, flags); + + hcd->state = HC_STATE_RUNNING; + + if (dwc2_is_device_mode(hsotg)) { + spin_unlock_irqrestore(&hsotg->lock, flags); + return 0; /* why 0 ?? */ + } + + dwc2_hcd_reinit(hsotg); + + /* Initialize and connect root hub if one is not already attached */ + if (bus->root_hub) { + dev_dbg(hsotg->dev, "DWC OTG HCD Has Root Hub\n"); + /* Inform the HUB driver to resume */ + usb_hcd_resume_root_hub(hcd); + } + + spin_unlock_irqrestore(&hsotg->lock, flags); + return 0; +} + +/* + * Halts the DWC_otg host mode operations in a clean manner. USB transfers are + * stopped. + */ +static void _dwc2_hcd_stop(struct usb_hcd *hcd) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + unsigned long flags; + + spin_lock_irqsave(&hsotg->lock, flags); + dwc2_hcd_stop(hsotg); + spin_unlock_irqrestore(&hsotg->lock, flags); + + usleep_range(1000, 3000); +} + +/* Returns the current frame number */ +static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + + return dwc2_hcd_get_frame_number(hsotg); +} + +static void dwc2_dump_urb_info(struct usb_hcd *hcd, struct urb *urb, + char *fn_name) +{ +#ifdef VERBOSE_DEBUG + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + char *pipetype; + char *speed; + + dev_vdbg(hsotg->dev, "%s, urb %p\n", fn_name, urb); + dev_vdbg(hsotg->dev, " Device address: %d\n", + usb_pipedevice(urb->pipe)); + dev_vdbg(hsotg->dev, " Endpoint: %d, %s\n", + usb_pipeendpoint(urb->pipe), + usb_pipein(urb->pipe) ? "IN" : "OUT"); + + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + pipetype = "CONTROL"; + break; + case PIPE_BULK: + pipetype = "BULK"; + break; + case PIPE_INTERRUPT: + pipetype = "INTERRUPT"; + break; + case PIPE_ISOCHRONOUS: + pipetype = "ISOCHRONOUS"; + break; + default: + pipetype = "UNKNOWN"; + break; + } + + dev_vdbg(hsotg->dev, " Endpoint type: %s %s (%s)\n", pipetype, + usb_urb_dir_in(urb) ? "IN" : "OUT", usb_pipein(urb->pipe) ? + "IN" : "OUT"); + + switch (urb->dev->speed) { + case USB_SPEED_HIGH: + speed = "HIGH"; + break; + case USB_SPEED_FULL: + speed = "FULL"; + break; + case USB_SPEED_LOW: + speed = "LOW"; + break; + default: + speed = "UNKNOWN"; + break; + } + + dev_vdbg(hsotg->dev, " Speed: %s\n", speed); + dev_vdbg(hsotg->dev, " Max packet size: %d\n", + usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); + dev_vdbg(hsotg->dev, " Data buffer length: %d\n", + urb->transfer_buffer_length); + dev_vdbg(hsotg->dev, " Transfer buffer: %p, Transfer DMA: %08lx\n", + urb->transfer_buffer, (unsigned long)urb->transfer_dma); + dev_vdbg(hsotg->dev, " Setup buffer: %p, Setup DMA: %08lx\n", + urb->setup_packet, (unsigned long)urb->setup_dma); + dev_vdbg(hsotg->dev, " Interval: %d\n", urb->interval); + + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + int i; + + for (i = 0; i < urb->number_of_packets; i++) { + dev_vdbg(hsotg->dev, " ISO Desc %d:\n", i); + dev_vdbg(hsotg->dev, " offset: %d, length %d\n", + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].length); + } + } +#endif +} + +/* + * Starts processing a USB transfer request specified by a USB Request Block + * (URB). mem_flags indicates the type of memory allocation to use while + * processing this URB. + */ +static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + struct usb_host_endpoint *ep = urb->ep; + struct dwc2_hcd_urb *dwc2_urb; + int i; + int retval; + int alloc_bandwidth = 0; + u8 ep_type = 0; + u32 tflags = 0; + void *buf; + unsigned long flags; + + if (dbg_urb(urb)) { + dev_vdbg(hsotg->dev, "DWC OTG HCD URB Enqueue\n"); + dwc2_dump_urb_info(hcd, urb, "urb_enqueue"); + } + + if (ep == NULL) + return -EINVAL; + + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS || + usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { + spin_lock_irqsave(&hsotg->lock, flags); + if (!dwc2_hcd_is_bandwidth_allocated(hsotg, ep)) + alloc_bandwidth = 1; + spin_unlock_irqrestore(&hsotg->lock, flags); + } + + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + ep_type = USB_ENDPOINT_XFER_CONTROL; + break; + case PIPE_ISOCHRONOUS: + ep_type = USB_ENDPOINT_XFER_ISOC; + break; + case PIPE_BULK: + ep_type = USB_ENDPOINT_XFER_BULK; + break; + case PIPE_INTERRUPT: + ep_type = USB_ENDPOINT_XFER_INT; + break; + default: + dev_warn(hsotg->dev, "Wrong ep type\n"); + } + + dwc2_urb = dwc2_hcd_urb_alloc(hsotg, urb->number_of_packets, + mem_flags); + if (!dwc2_urb) + return -ENOMEM; + + dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, usb_pipedevice(urb->pipe), + usb_pipeendpoint(urb->pipe), ep_type, + usb_pipein(urb->pipe), + usb_maxpacket(urb->dev, urb->pipe, + !(usb_pipein(urb->pipe)))); + + buf = urb->transfer_buffer; + + if (hcd->self.uses_dma) { + if (!buf && (urb->transfer_dma & 3)) { + dev_err(hsotg->dev, + "%s: unaligned transfer with no transfer_buffer", + __func__); + retval = -EINVAL; + goto fail1; + } + } + + if (!(urb->transfer_flags & URB_NO_INTERRUPT)) + tflags |= URB_GIVEBACK_ASAP; + if (urb->transfer_flags & URB_ZERO_PACKET) + tflags |= URB_SEND_ZERO_PACKET; + + dwc2_urb->priv = urb; + dwc2_urb->buf = buf; + dwc2_urb->dma = urb->transfer_dma; + dwc2_urb->length = urb->transfer_buffer_length; + dwc2_urb->setup_packet = urb->setup_packet; + dwc2_urb->setup_dma = urb->setup_dma; + dwc2_urb->flags = tflags; + dwc2_urb->interval = urb->interval; + dwc2_urb->status = -EINPROGRESS; + + for (i = 0; i < urb->number_of_packets; ++i) + dwc2_hcd_urb_set_iso_desc_params(dwc2_urb, i, + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].length); + + urb->hcpriv = dwc2_urb; + + spin_lock_irqsave(&hsotg->lock, flags); + retval = usb_hcd_link_urb_to_ep(hcd, urb); + spin_unlock_irqrestore(&hsotg->lock, flags); + if (retval) + goto fail1; + + retval = dwc2_hcd_urb_enqueue(hsotg, dwc2_urb, &ep->hcpriv, mem_flags); + if (retval) + goto fail2; + + if (alloc_bandwidth) { + spin_lock_irqsave(&hsotg->lock, flags); + dwc2_allocate_bus_bandwidth(hcd, + dwc2_hcd_get_ep_bandwidth(hsotg, ep), + urb); + spin_unlock_irqrestore(&hsotg->lock, flags); + } + + return 0; + +fail2: + spin_lock_irqsave(&hsotg->lock, flags); + dwc2_urb->priv = NULL; + usb_hcd_unlink_urb_from_ep(hcd, urb); + spin_unlock_irqrestore(&hsotg->lock, flags); +fail1: + urb->hcpriv = NULL; + kfree(dwc2_urb); + + return retval; +} + +/* + * Aborts/cancels a USB transfer request. Always returns 0 to indicate success. + */ +static int _dwc2_hcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, + int status) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + int rc; + unsigned long flags; + + dev_dbg(hsotg->dev, "DWC OTG HCD URB Dequeue\n"); + dwc2_dump_urb_info(hcd, urb, "urb_dequeue"); + + spin_lock_irqsave(&hsotg->lock, flags); + + rc = usb_hcd_check_unlink_urb(hcd, urb, status); + if (rc) + goto out; + + if (!urb->hcpriv) { + dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n"); + goto out; + } + + rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); + + usb_hcd_unlink_urb_from_ep(hcd, urb); + + kfree(urb->hcpriv); + urb->hcpriv = NULL; + + /* Higher layer software sets URB status */ + spin_unlock(&hsotg->lock); + usb_hcd_giveback_urb(hcd, urb, status); + spin_lock(&hsotg->lock); + + dev_dbg(hsotg->dev, "Called usb_hcd_giveback_urb()\n"); + dev_dbg(hsotg->dev, " urb->status = %d\n", urb->status); +out: + spin_unlock_irqrestore(&hsotg->lock, flags); + + return rc; +} + +/* + * Frees resources in the DWC_otg controller related to a given endpoint. Also + * clears state in the HCD related to the endpoint. Any URBs for the endpoint + * must already be dequeued. + */ +static void _dwc2_hcd_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + + dev_dbg(hsotg->dev, + "DWC OTG HCD EP DISABLE: bEndpointAddress=0x%02x, ep->hcpriv=%p\n", + ep->desc.bEndpointAddress, ep->hcpriv); + dwc2_hcd_endpoint_disable(hsotg, ep, 250); +} + +/* + * Resets endpoint specific parameter values, in current version used to reset + * the data toggle (as a WA). This function can be called from usb_clear_halt + * routine. + */ +static void _dwc2_hcd_endpoint_reset(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + int is_control = usb_endpoint_xfer_control(&ep->desc); + int is_out = usb_endpoint_dir_out(&ep->desc); + int epnum = usb_endpoint_num(&ep->desc); + struct usb_device *udev; + unsigned long flags; + + dev_dbg(hsotg->dev, + "DWC OTG HCD EP RESET: bEndpointAddress=0x%02x\n", + ep->desc.bEndpointAddress); + + udev = to_usb_device(hsotg->dev); + + spin_lock_irqsave(&hsotg->lock, flags); + + usb_settoggle(udev, epnum, is_out, 0); + if (is_control) + usb_settoggle(udev, epnum, !is_out, 0); + dwc2_hcd_endpoint_reset(hsotg, ep); + + spin_unlock_irqrestore(&hsotg->lock, flags); +} + +/* + * Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if + * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid + * interrupt. + * + * This function is called by the USB core when an interrupt occurs + */ +static irqreturn_t _dwc2_hcd_irq(struct usb_hcd *hcd) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + + return dwc2_handle_hcd_intr(hsotg); +} + +/* + * Creates Status Change bitmap for the root hub and root port. The bitmap is + * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 + * is the status change indicator for the single root port. Returns 1 if either + * change indicator is 1, otherwise returns 0. + */ +static int _dwc2_hcd_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + + buf[0] = dwc2_hcd_is_status_changed(hsotg, 1) << 1; + return buf[0] != 0; +} + +/* Handles hub class-specific requests */ +static int _dwc2_hcd_hub_control(struct usb_hcd *hcd, u16 typereq, u16 wvalue, + u16 windex, char *buf, u16 wlength) +{ + int retval = dwc2_hcd_hub_control(dwc2_hcd_to_hsotg(hcd), typereq, + wvalue, windex, buf, wlength); + return retval; +} + +/* Handles hub TT buffer clear completions */ +static void _dwc2_hcd_clear_tt_buffer_complete(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + struct dwc2_qh *qh; + unsigned long flags; + + qh = ep->hcpriv; + if (!qh) + return; + + spin_lock_irqsave(&hsotg->lock, flags); + qh->tt_buffer_dirty = 0; + + if (hsotg->flags.b.port_connect_status) + dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_ALL); + + spin_unlock_irqrestore(&hsotg->lock, flags); +} + +static struct hc_driver dwc2_hc_driver = { + .description = "dwc2_hsotg", + .product_desc = "DWC OTG Controller", + .hcd_priv_size = sizeof(struct wrapper_priv_data), + + .irq = _dwc2_hcd_irq, + .flags = HCD_MEMORY | HCD_USB2, + + .start = _dwc2_hcd_start, + .stop = _dwc2_hcd_stop, + .urb_enqueue = _dwc2_hcd_urb_enqueue, + .urb_dequeue = _dwc2_hcd_urb_dequeue, + .endpoint_disable = _dwc2_hcd_endpoint_disable, + .endpoint_reset = _dwc2_hcd_endpoint_reset, + .get_frame_number = _dwc2_hcd_get_frame_number, + + .hub_status_data = _dwc2_hcd_hub_status_data, + .hub_control = _dwc2_hcd_hub_control, + .clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete, +}; + +/* + * Frees secondary storage associated with the dwc2_hsotg structure contained + * in the struct usb_hcd field + */ +static void dwc2_hcd_free(struct dwc2_hsotg *hsotg) +{ + u32 ahbcfg; + u32 dctl; + int i; + + dev_dbg(hsotg->dev, "DWC OTG HCD FREE\n"); + + /* Free memory for QH/QTD lists */ + dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_inactive); + dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_active); + dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_inactive); + dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_ready); + dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_assigned); + dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_queued); + + /* Free memory for the host channels */ + for (i = 0; i < MAX_EPS_CHANNELS; i++) { + struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i]; + + if (chan != NULL) { + dev_dbg(hsotg->dev, "HCD Free channel #%i, chan=%p\n", + i, chan); + hsotg->hc_ptr_array[i] = NULL; + kfree(chan); + } + } + + if (hsotg->core_params->dma_enable > 0) { + if (hsotg->status_buf) { + dma_free_coherent(hsotg->dev, DWC2_HCD_STATUS_BUF_SIZE, + hsotg->status_buf, + hsotg->status_buf_dma); + hsotg->status_buf = NULL; + } + } else { + kfree(hsotg->status_buf); + hsotg->status_buf = NULL; + } + + ahbcfg = readl(hsotg->regs + GAHBCFG); + + /* Disable all interrupts */ + ahbcfg &= ~GAHBCFG_GLBL_INTR_EN; + writel(ahbcfg, hsotg->regs + GAHBCFG); + writel(0, hsotg->regs + GINTMSK); + + if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) { + dctl = readl(hsotg->regs + DCTL); + dctl |= DCTL_SFTDISCON; + writel(dctl, hsotg->regs + DCTL); + } + + if (hsotg->wq_otg) { + if (!cancel_work_sync(&hsotg->wf_otg)) + flush_workqueue(hsotg->wq_otg); + destroy_workqueue(hsotg->wq_otg); + } + + kfree(hsotg->core_params); + hsotg->core_params = NULL; + del_timer(&hsotg->wkp_timer); +} + +static void dwc2_hcd_release(struct dwc2_hsotg *hsotg) +{ + /* Turn off all host-specific interrupts */ + dwc2_disable_host_interrupts(hsotg); + + dwc2_hcd_free(hsotg); +} + +/* + * Sets all parameters to the given value. + * + * Assumes that the dwc2_core_params struct contains only integers. + */ +void dwc2_set_all_params(struct dwc2_core_params *params, int value) +{ + int *p = (int *)params; + size_t size = sizeof(*params) / sizeof(*p); + int i; + + for (i = 0; i < size; i++) + p[i] = value; +} +EXPORT_SYMBOL_GPL(dwc2_set_all_params); + +/* + * Initializes the HCD. This function allocates memory for and initializes the + * static parts of the usb_hcd and dwc2_hsotg structures. It also registers the + * USB bus with the core and calls the hc_driver->start() function. It returns + * a negative error on failure. + */ +int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, + const struct dwc2_core_params *params) +{ + struct usb_hcd *hcd; + struct dwc2_host_chan *channel; + u32 hcfg; + int i, num_channels; + int retval; + + dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n"); + + /* Detect config values from hardware */ + retval = dwc2_get_hwparams(hsotg); + + if (retval) + return retval; + + retval = -ENOMEM; + + hcfg = readl(hsotg->regs + HCFG); + dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg); + +#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS + hsotg->frame_num_array = kzalloc(sizeof(*hsotg->frame_num_array) * + FRAME_NUM_ARRAY_SIZE, GFP_KERNEL); + if (!hsotg->frame_num_array) + goto error1; + hsotg->last_frame_num_array = kzalloc( + sizeof(*hsotg->last_frame_num_array) * + FRAME_NUM_ARRAY_SIZE, GFP_KERNEL); + if (!hsotg->last_frame_num_array) + goto error1; + hsotg->last_frame_num = HFNUM_MAX_FRNUM; +#endif + + hsotg->core_params = kzalloc(sizeof(*hsotg->core_params), GFP_KERNEL); + if (!hsotg->core_params) + goto error1; + + dwc2_set_all_params(hsotg->core_params, -1); + + /* Validate parameter values */ + dwc2_set_parameters(hsotg, params); + + /* Check if the bus driver or platform code has setup a dma_mask */ + if (hsotg->core_params->dma_enable > 0 && + hsotg->dev->dma_mask == NULL) { + dev_warn(hsotg->dev, + "dma_mask not set, disabling DMA\n"); + hsotg->core_params->dma_enable = 0; + hsotg->core_params->dma_desc_enable = 0; + } + + /* Set device flags indicating whether the HCD supports DMA */ + if (hsotg->core_params->dma_enable > 0) { + if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) + dev_warn(hsotg->dev, "can't set DMA mask\n"); + if (dma_set_coherent_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) + dev_warn(hsotg->dev, "can't set coherent DMA mask\n"); + } + + hcd = usb_create_hcd(&dwc2_hc_driver, hsotg->dev, dev_name(hsotg->dev)); + if (!hcd) + goto error1; + + if (hsotg->core_params->dma_enable <= 0) + hcd->self.uses_dma = 0; + + hcd->has_tt = 1; + + spin_lock_init(&hsotg->lock); + ((struct wrapper_priv_data *) &hcd->hcd_priv)->hsotg = hsotg; + hsotg->priv = hcd; + + /* + * Disable the global interrupt until all the interrupt handlers are + * installed + */ + dwc2_disable_global_interrupts(hsotg); + + /* Initialize the DWC_otg core, and select the Phy type */ + retval = dwc2_core_init(hsotg, true, irq); + if (retval) + goto error2; + + /* Create new workqueue and init work */ + retval = -ENOMEM; + hsotg->wq_otg = create_singlethread_workqueue("dwc2"); + if (!hsotg->wq_otg) { + dev_err(hsotg->dev, "Failed to create workqueue\n"); + goto error2; + } + INIT_WORK(&hsotg->wf_otg, dwc2_conn_id_status_change); + + setup_timer(&hsotg->wkp_timer, dwc2_wakeup_detected, + (unsigned long)hsotg); + + /* Initialize the non-periodic schedule */ + INIT_LIST_HEAD(&hsotg->non_periodic_sched_inactive); + INIT_LIST_HEAD(&hsotg->non_periodic_sched_active); + + /* Initialize the periodic schedule */ + INIT_LIST_HEAD(&hsotg->periodic_sched_inactive); + INIT_LIST_HEAD(&hsotg->periodic_sched_ready); + INIT_LIST_HEAD(&hsotg->periodic_sched_assigned); + INIT_LIST_HEAD(&hsotg->periodic_sched_queued); + + /* + * Create a host channel descriptor for each host channel implemented + * in the controller. Initialize the channel descriptor array. + */ + INIT_LIST_HEAD(&hsotg->free_hc_list); + num_channels = hsotg->core_params->host_channels; + memset(&hsotg->hc_ptr_array[0], 0, sizeof(hsotg->hc_ptr_array)); + + for (i = 0; i < num_channels; i++) { + channel = kzalloc(sizeof(*channel), GFP_KERNEL); + if (channel == NULL) + goto error3; + channel->hc_num = i; + hsotg->hc_ptr_array[i] = channel; + } + + if (hsotg->core_params->uframe_sched > 0) + dwc2_hcd_init_usecs(hsotg); + + /* Initialize hsotg start work */ + INIT_DELAYED_WORK(&hsotg->start_work, dwc2_hcd_start_func); + + /* Initialize port reset work */ + INIT_DELAYED_WORK(&hsotg->reset_work, dwc2_hcd_reset_func); + + /* + * Allocate space for storing data on status transactions. Normally no + * data is sent, but this space acts as a bit bucket. This must be + * done after usb_add_hcd since that function allocates the DMA buffer + * pool. + */ + if (hsotg->core_params->dma_enable > 0) + hsotg->status_buf = dma_alloc_coherent(hsotg->dev, + DWC2_HCD_STATUS_BUF_SIZE, + &hsotg->status_buf_dma, GFP_KERNEL); + else + hsotg->status_buf = kzalloc(DWC2_HCD_STATUS_BUF_SIZE, + GFP_KERNEL); + + if (!hsotg->status_buf) + goto error3; + + hsotg->otg_port = 1; + hsotg->frame_list = NULL; + hsotg->frame_list_dma = 0; + hsotg->periodic_qh_count = 0; + + /* Initiate lx_state to L3 disconnected state */ + hsotg->lx_state = DWC2_L3; + + hcd->self.otg_port = hsotg->otg_port; + + /* Don't support SG list at this point */ + hcd->self.sg_tablesize = 0; + + /* + * Finish generic HCD initialization and start the HCD. This function + * allocates the DMA buffer pool, registers the USB bus, requests the + * IRQ line, and calls hcd_start method. + */ + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (retval < 0) + goto error3; + + dwc2_hcd_dump_state(hsotg); + + dwc2_enable_global_interrupts(hsotg); + + return 0; + +error3: + dwc2_hcd_release(hsotg); +error2: + usb_put_hcd(hcd); +error1: + kfree(hsotg->core_params); + +#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS + kfree(hsotg->last_frame_num_array); + kfree(hsotg->frame_num_array); +#endif + + dev_err(hsotg->dev, "%s() FAILED, returning %d\n", __func__, retval); + return retval; +} +EXPORT_SYMBOL_GPL(dwc2_hcd_init); + +/* + * Removes the HCD. + * Frees memory and resources associated with the HCD and deregisters the bus. + */ +void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) +{ + struct usb_hcd *hcd; + + dev_dbg(hsotg->dev, "DWC OTG HCD REMOVE\n"); + + hcd = dwc2_hsotg_to_hcd(hsotg); + dev_dbg(hsotg->dev, "hsotg->hcd = %p\n", hcd); + + if (!hcd) { + dev_dbg(hsotg->dev, "%s: dwc2_hsotg_to_hcd(hsotg) NULL!\n", + __func__); + return; + } + + usb_remove_hcd(hcd); + hsotg->priv = NULL; + dwc2_hcd_release(hsotg); + usb_put_hcd(hcd); + +#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS + kfree(hsotg->last_frame_num_array); + kfree(hsotg->frame_num_array); +#endif +} +EXPORT_SYMBOL_GPL(dwc2_hcd_remove); |