diff options
Diffstat (limited to 'drivers/tty/serial/pnx8xxx_uart.c')
| -rw-r--r-- | drivers/tty/serial/pnx8xxx_uart.c | 858 |
1 files changed, 0 insertions, 858 deletions
diff --git a/drivers/tty/serial/pnx8xxx_uart.c b/drivers/tty/serial/pnx8xxx_uart.c deleted file mode 100644 index 972d94e8d32b..000000000000 --- a/drivers/tty/serial/pnx8xxx_uart.c +++ /dev/null @@ -1,858 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * UART driver for PNX8XXX SoCs - * - * Author: Per Hallsmark per.hallsmark@mvista.com - * Ported to 2.6 kernel by EmbeddedAlley - * Reworked by Vitaly Wool <vitalywool@gmail.com> - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * Copyright (C) 2000 Deep Blue Solutions Ltd. - */ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial_core.h> -#include <linux/serial.h> -#include <linux/serial_pnx8xxx.h> - -#include <asm/io.h> -#include <asm/irq.h> - -/* We'll be using StrongARM sa1100 serial port major/minor */ -#define SERIAL_PNX8XXX_MAJOR 204 -#define MINOR_START 5 - -#define NR_PORTS 2 - -#define PNX8XXX_ISR_PASS_LIMIT 256 - -/* - * Convert from ignore_status_mask or read_status_mask to FIFO - * and interrupt status bits - */ -#define SM_TO_FIFO(x) ((x) >> 10) -#define SM_TO_ISTAT(x) ((x) & 0x000001ff) -#define FIFO_TO_SM(x) ((x) << 10) -#define ISTAT_TO_SM(x) ((x) & 0x000001ff) - -/* - * This is the size of our serial port register set. - */ -#define UART_PORT_SIZE 0x1000 - -/* - * This determines how often we check the modem status signals - * for any change. They generally aren't connected to an IRQ - * so we have to poll them. We also check immediately before - * filling the TX fifo incase CTS has been dropped. - */ -#define MCTRL_TIMEOUT (250*HZ/1000) - -extern struct pnx8xxx_port pnx8xxx_ports[]; - -static inline int serial_in(struct pnx8xxx_port *sport, int offset) -{ - return (__raw_readl(sport->port.membase + offset)); -} - -static inline void serial_out(struct pnx8xxx_port *sport, int offset, int value) -{ - __raw_writel(value, sport->port.membase + offset); -} - -/* - * Handle any change of modem status signal since we were last called. - */ -static void pnx8xxx_mctrl_check(struct pnx8xxx_port *sport) -{ - unsigned int status, changed; - - status = sport->port.ops->get_mctrl(&sport->port); - changed = status ^ sport->old_status; - - if (changed == 0) - return; - - sport->old_status = status; - - if (changed & TIOCM_RI) - sport->port.icount.rng++; - if (changed & TIOCM_DSR) - sport->port.icount.dsr++; - if (changed & TIOCM_CAR) - uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); - if (changed & TIOCM_CTS) - uart_handle_cts_change(&sport->port, status & TIOCM_CTS); - - wake_up_interruptible(&sport->port.state->port.delta_msr_wait); -} - -/* - * This is our per-port timeout handler, for checking the - * modem status signals. - */ -static void pnx8xxx_timeout(struct timer_list *t) -{ - struct pnx8xxx_port *sport = from_timer(sport, t, timer); - unsigned long flags; - - if (sport->port.state) { - spin_lock_irqsave(&sport->port.lock, flags); - pnx8xxx_mctrl_check(sport); - spin_unlock_irqrestore(&sport->port.lock, flags); - - mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); - } -} - -/* - * interrupts disabled on entry - */ -static void pnx8xxx_stop_tx(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - u32 ien; - - /* Disable TX intr */ - ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLTX); - - /* Clear all pending TX intr */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX); -} - -/* - * interrupts may not be disabled on entry - */ -static void pnx8xxx_start_tx(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - u32 ien; - - /* Clear all pending TX intr */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX); - - /* Enable TX intr */ - ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, ien | PNX8XXX_UART_INT_ALLTX); -} - -/* - * Interrupts enabled - */ -static void pnx8xxx_stop_rx(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - u32 ien; - - /* Disable RX intr */ - ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLRX); - - /* Clear all pending RX intr */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX); -} - -/* - * Set the modem control timer to fire immediately. - */ -static void pnx8xxx_enable_ms(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - - mod_timer(&sport->timer, jiffies); -} - -static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport) -{ - unsigned int status, ch, flg; - - status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) | - ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT)); - while (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFIFO)) { - ch = serial_in(sport, PNX8XXX_FIFO) & 0xff; - - sport->port.icount.rx++; - - flg = TTY_NORMAL; - - /* - * note that the error handling code is - * out of the main execution path - */ - if (status & (FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE | - PNX8XXX_UART_FIFO_RXPAR | - PNX8XXX_UART_FIFO_RXBRK) | - ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))) { - if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXBRK)) { - status &= ~(FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)); - sport->port.icount.brk++; - if (uart_handle_break(&sport->port)) - goto ignore_char; - } else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)) - sport->port.icount.parity++; - else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE)) - sport->port.icount.frame++; - if (status & ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN)) - sport->port.icount.overrun++; - - status &= sport->port.read_status_mask; - - if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)) - flg = TTY_PARITY; - else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE)) - flg = TTY_FRAME; - - sport->port.sysrq = 0; - } - - if (uart_handle_sysrq_char(&sport->port, ch)) - goto ignore_char; - - uart_insert_char(&sport->port, status, - ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN), ch, flg); - - ignore_char: - serial_out(sport, PNX8XXX_LCR, serial_in(sport, PNX8XXX_LCR) | - PNX8XXX_UART_LCR_RX_NEXT); - status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) | - ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT)); - } - - spin_unlock(&sport->port.lock); - tty_flip_buffer_push(&sport->port.state->port); - spin_lock(&sport->port.lock); -} - -static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport) -{ - struct circ_buf *xmit = &sport->port.state->xmit; - - if (sport->port.x_char) { - serial_out(sport, PNX8XXX_FIFO, sport->port.x_char); - sport->port.icount.tx++; - sport->port.x_char = 0; - return; - } - - /* - * Check the modem control lines before - * transmitting anything. - */ - pnx8xxx_mctrl_check(sport); - - if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { - pnx8xxx_stop_tx(&sport->port); - return; - } - - /* - * TX while bytes available - */ - while (((serial_in(sport, PNX8XXX_FIFO) & - PNX8XXX_UART_FIFO_TXFIFO) >> 16) < 16) { - serial_out(sport, PNX8XXX_FIFO, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - sport->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&sport->port); - - if (uart_circ_empty(xmit)) - pnx8xxx_stop_tx(&sport->port); -} - -static irqreturn_t pnx8xxx_int(int irq, void *dev_id) -{ - struct pnx8xxx_port *sport = dev_id; - unsigned int status; - - spin_lock(&sport->port.lock); - /* Get the interrupts */ - status = serial_in(sport, PNX8XXX_ISTAT) & serial_in(sport, PNX8XXX_IEN); - - /* Byte or break signal received */ - if (status & (PNX8XXX_UART_INT_RX | PNX8XXX_UART_INT_BREAK)) - pnx8xxx_rx_chars(sport); - - /* TX holding register empty - transmit a byte */ - if (status & PNX8XXX_UART_INT_TX) - pnx8xxx_tx_chars(sport); - - /* Clear the ISTAT register */ - serial_out(sport, PNX8XXX_ICLR, status); - - spin_unlock(&sport->port.lock); - return IRQ_HANDLED; -} - -/* - * Return TIOCSER_TEMT when transmitter is not busy. - */ -static unsigned int pnx8xxx_tx_empty(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - - return serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA ? 0 : TIOCSER_TEMT; -} - -static unsigned int pnx8xxx_get_mctrl(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - unsigned int mctrl = TIOCM_DSR; - unsigned int msr; - - /* REVISIT */ - - msr = serial_in(sport, PNX8XXX_MCR); - - mctrl |= msr & PNX8XXX_UART_MCR_CTS ? TIOCM_CTS : 0; - mctrl |= msr & PNX8XXX_UART_MCR_DCD ? TIOCM_CAR : 0; - - return mctrl; -} - -static void pnx8xxx_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -#if 0 /* FIXME */ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - unsigned int msr; -#endif -} - -/* - * Interrupts always disabled. - */ -static void pnx8xxx_break_ctl(struct uart_port *port, int break_state) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - unsigned long flags; - unsigned int lcr; - - spin_lock_irqsave(&sport->port.lock, flags); - lcr = serial_in(sport, PNX8XXX_LCR); - if (break_state == -1) - lcr |= PNX8XXX_UART_LCR_TXBREAK; - else - lcr &= ~PNX8XXX_UART_LCR_TXBREAK; - serial_out(sport, PNX8XXX_LCR, lcr); - spin_unlock_irqrestore(&sport->port.lock, flags); -} - -static int pnx8xxx_startup(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - int retval; - - /* - * Allocate the IRQ - */ - retval = request_irq(sport->port.irq, pnx8xxx_int, 0, - "pnx8xxx-uart", sport); - if (retval) - return retval; - - /* - * Finally, clear and enable interrupts - */ - - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX | - PNX8XXX_UART_INT_ALLTX); - - serial_out(sport, PNX8XXX_IEN, serial_in(sport, PNX8XXX_IEN) | - PNX8XXX_UART_INT_ALLRX | - PNX8XXX_UART_INT_ALLTX); - - /* - * Enable modem status interrupts - */ - spin_lock_irq(&sport->port.lock); - pnx8xxx_enable_ms(&sport->port); - spin_unlock_irq(&sport->port.lock); - - return 0; -} - -static void pnx8xxx_shutdown(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - int lcr; - - /* - * Stop our timer. - */ - del_timer_sync(&sport->timer); - - /* - * Disable all interrupts - */ - serial_out(sport, PNX8XXX_IEN, 0); - - /* - * Reset the Tx and Rx FIFOS, disable the break condition - */ - lcr = serial_in(sport, PNX8XXX_LCR); - lcr &= ~PNX8XXX_UART_LCR_TXBREAK; - lcr |= PNX8XXX_UART_LCR_TX_RST | PNX8XXX_UART_LCR_RX_RST; - serial_out(sport, PNX8XXX_LCR, lcr); - - /* - * Clear all interrupts - */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX | - PNX8XXX_UART_INT_ALLTX); - - /* - * Free the interrupt - */ - free_irq(sport->port.irq, sport); -} - -static void -pnx8xxx_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - unsigned long flags; - unsigned int lcr_fcr, old_ien, baud, quot; - unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; - - /* - * We only support CS7 and CS8. - */ - while ((termios->c_cflag & CSIZE) != CS7 && - (termios->c_cflag & CSIZE) != CS8) { - termios->c_cflag &= ~CSIZE; - termios->c_cflag |= old_csize; - old_csize = CS8; - } - - if ((termios->c_cflag & CSIZE) == CS8) - lcr_fcr = PNX8XXX_UART_LCR_8BIT; - else - lcr_fcr = 0; - - if (termios->c_cflag & CSTOPB) - lcr_fcr |= PNX8XXX_UART_LCR_2STOPB; - if (termios->c_cflag & PARENB) { - lcr_fcr |= PNX8XXX_UART_LCR_PAREN; - if (!(termios->c_cflag & PARODD)) - lcr_fcr |= PNX8XXX_UART_LCR_PAREVN; - } - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - spin_lock_irqsave(&sport->port.lock, flags); - - sport->port.read_status_mask = ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN) | - ISTAT_TO_SM(PNX8XXX_UART_INT_EMPTY) | - ISTAT_TO_SM(PNX8XXX_UART_INT_RX); - if (termios->c_iflag & INPCK) - sport->port.read_status_mask |= - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR); - if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) - sport->port.read_status_mask |= - ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK); - - /* - * Characters to ignore - */ - sport->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR); - if (termios->c_iflag & IGNBRK) { - sport->port.ignore_status_mask |= - ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK); - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= - ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN); - } - - /* - * ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - sport->port.ignore_status_mask |= - ISTAT_TO_SM(PNX8XXX_UART_INT_RX); - - del_timer_sync(&sport->timer); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - /* - * disable interrupts and drain transmitter - */ - old_ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX | - PNX8XXX_UART_INT_ALLRX)); - - while (serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA) - barrier(); - - /* then, disable everything */ - serial_out(sport, PNX8XXX_IEN, 0); - - /* Reset the Rx and Tx FIFOs too */ - lcr_fcr |= PNX8XXX_UART_LCR_TX_RST; - lcr_fcr |= PNX8XXX_UART_LCR_RX_RST; - - /* set the parity, stop bits and data size */ - serial_out(sport, PNX8XXX_LCR, lcr_fcr); - - /* set the baud rate */ - quot -= 1; - serial_out(sport, PNX8XXX_BAUD, quot); - - serial_out(sport, PNX8XXX_ICLR, -1); - - serial_out(sport, PNX8XXX_IEN, old_ien); - - if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) - pnx8xxx_enable_ms(&sport->port); - - spin_unlock_irqrestore(&sport->port.lock, flags); -} - -static const char *pnx8xxx_type(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - - return sport->port.type == PORT_PNX8XXX ? "PNX8XXX" : NULL; -} - -/* - * Release the memory region(s) being used by 'port'. - */ -static void pnx8xxx_release_port(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - - release_mem_region(sport->port.mapbase, UART_PORT_SIZE); -} - -/* - * Request the memory region(s) being used by 'port'. - */ -static int pnx8xxx_request_port(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - return request_mem_region(sport->port.mapbase, UART_PORT_SIZE, - "pnx8xxx-uart") != NULL ? 0 : -EBUSY; -} - -/* - * Configure/autoconfigure the port. - */ -static void pnx8xxx_config_port(struct uart_port *port, int flags) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - - if (flags & UART_CONFIG_TYPE && - pnx8xxx_request_port(&sport->port) == 0) - sport->port.type = PORT_PNX8XXX; -} - -/* - * Verify the new serial_struct (for TIOCSSERIAL). - * The only change we allow are to the flags and type, and - * even then only between PORT_PNX8XXX and PORT_UNKNOWN - */ -static int -pnx8xxx_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_PNX8XXX) - ret = -EINVAL; - if (sport->port.irq != ser->irq) - ret = -EINVAL; - if (ser->io_type != SERIAL_IO_MEM) - ret = -EINVAL; - if (sport->port.uartclk / 16 != ser->baud_base) - ret = -EINVAL; - if ((void *)sport->port.mapbase != ser->iomem_base) - ret = -EINVAL; - if (sport->port.iobase != ser->port) - ret = -EINVAL; - if (ser->hub6 != 0) - ret = -EINVAL; - return ret; -} - -static const struct uart_ops pnx8xxx_pops = { - .tx_empty = pnx8xxx_tx_empty, - .set_mctrl = pnx8xxx_set_mctrl, - .get_mctrl = pnx8xxx_get_mctrl, - .stop_tx = pnx8xxx_stop_tx, - .start_tx = pnx8xxx_start_tx, - .stop_rx = pnx8xxx_stop_rx, - .enable_ms = pnx8xxx_enable_ms, - .break_ctl = pnx8xxx_break_ctl, - .startup = pnx8xxx_startup, - .shutdown = pnx8xxx_shutdown, - .set_termios = pnx8xxx_set_termios, - .type = pnx8xxx_type, - .release_port = pnx8xxx_release_port, - .request_port = pnx8xxx_request_port, - .config_port = pnx8xxx_config_port, - .verify_port = pnx8xxx_verify_port, -}; - - -/* - * Setup the PNX8XXX serial ports. - * - * Note also that we support "console=ttySx" where "x" is either 0 or 1. - */ -static void __init pnx8xxx_init_ports(void) -{ - static int first = 1; - int i; - - if (!first) - return; - first = 0; - - for (i = 0; i < NR_PORTS; i++) { - timer_setup(&pnx8xxx_ports[i].timer, pnx8xxx_timeout, 0); - pnx8xxx_ports[i].port.ops = &pnx8xxx_pops; - } -} - -#ifdef CONFIG_SERIAL_PNX8XXX_CONSOLE - -static void pnx8xxx_console_putchar(struct uart_port *port, int ch) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - int status; - - do { - /* Wait for UART_TX register to empty */ - status = serial_in(sport, PNX8XXX_FIFO); - } while (status & PNX8XXX_UART_FIFO_TXFIFO); - serial_out(sport, PNX8XXX_FIFO, ch); -} - -/* - * Interrupts are disabled on entering - */static void -pnx8xxx_console_write(struct console *co, const char *s, unsigned int count) -{ - struct pnx8xxx_port *sport = &pnx8xxx_ports[co->index]; - unsigned int old_ien, status; - - /* - * First, save IEN and then disable interrupts - */ - old_ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX | - PNX8XXX_UART_INT_ALLRX)); - - uart_console_write(&sport->port, s, count, pnx8xxx_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore IEN - */ - do { - /* Wait for UART_TX register to empty */ - status = serial_in(sport, PNX8XXX_FIFO); - } while (status & PNX8XXX_UART_FIFO_TXFIFO); - - /* Clear TX and EMPTY interrupt */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_TX | - PNX8XXX_UART_INT_EMPTY); - - serial_out(sport, PNX8XXX_IEN, old_ien); -} - -static int __init -pnx8xxx_console_setup(struct console *co, char *options) -{ - struct pnx8xxx_port *sport; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index == -1 || co->index >= NR_PORTS) - co->index = 0; - sport = &pnx8xxx_ports[co->index]; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&sport->port, co, baud, parity, bits, flow); -} - -static struct uart_driver pnx8xxx_reg; -static struct console pnx8xxx_console = { - .name = "ttyS", - .write = pnx8xxx_console_write, - .device = uart_console_device, - .setup = pnx8xxx_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &pnx8xxx_reg, -}; - -static int __init pnx8xxx_rs_console_init(void) -{ - pnx8xxx_init_ports(); - register_console(&pnx8xxx_console); - return 0; -} -console_initcall(pnx8xxx_rs_console_init); - -#define PNX8XXX_CONSOLE &pnx8xxx_console -#else -#define PNX8XXX_CONSOLE NULL -#endif - -static struct uart_driver pnx8xxx_reg = { - .owner = THIS_MODULE, - .driver_name = "ttyS", - .dev_name = "ttyS", - .major = SERIAL_PNX8XXX_MAJOR, - .minor = MINOR_START, - .nr = NR_PORTS, - .cons = PNX8XXX_CONSOLE, -}; - -static int pnx8xxx_serial_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct pnx8xxx_port *sport = platform_get_drvdata(pdev); - - return uart_suspend_port(&pnx8xxx_reg, &sport->port); -} - -static int pnx8xxx_serial_resume(struct platform_device *pdev) -{ - struct pnx8xxx_port *sport = platform_get_drvdata(pdev); - - return uart_resume_port(&pnx8xxx_reg, &sport->port); -} - -static int pnx8xxx_serial_probe(struct platform_device *pdev) -{ - struct resource *res = pdev->resource; - int i; - - for (i = 0; i < pdev->num_resources; i++, res++) { - if (!(res->flags & IORESOURCE_MEM)) - continue; - - for (i = 0; i < NR_PORTS; i++) { - if (pnx8xxx_ports[i].port.mapbase != res->start) - continue; - - pnx8xxx_ports[i].port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_PNX8XXX_CONSOLE); - pnx8xxx_ports[i].port.dev = &pdev->dev; - uart_add_one_port(&pnx8xxx_reg, &pnx8xxx_ports[i].port); - platform_set_drvdata(pdev, &pnx8xxx_ports[i]); - break; - } - } - - return 0; -} - -static int pnx8xxx_serial_remove(struct platform_device *pdev) -{ - struct pnx8xxx_port *sport = platform_get_drvdata(pdev); - - if (sport) - uart_remove_one_port(&pnx8xxx_reg, &sport->port); - - return 0; -} - -static struct platform_driver pnx8xxx_serial_driver = { - .driver = { - .name = "pnx8xxx-uart", - }, - .probe = pnx8xxx_serial_probe, - .remove = pnx8xxx_serial_remove, - .suspend = pnx8xxx_serial_suspend, - .resume = pnx8xxx_serial_resume, -}; - -static int __init pnx8xxx_serial_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: PNX8XXX driver\n"); - - pnx8xxx_init_ports(); - - ret = uart_register_driver(&pnx8xxx_reg); - if (ret == 0) { - ret = platform_driver_register(&pnx8xxx_serial_driver); - if (ret) - uart_unregister_driver(&pnx8xxx_reg); - } - return ret; -} - -static void __exit pnx8xxx_serial_exit(void) -{ - platform_driver_unregister(&pnx8xxx_serial_driver); - uart_unregister_driver(&pnx8xxx_reg); -} - -module_init(pnx8xxx_serial_init); -module_exit(pnx8xxx_serial_exit); - -MODULE_AUTHOR("Embedded Alley Solutions, Inc."); -MODULE_DESCRIPTION("PNX8XXX SoCs serial port driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_PNX8XXX_MAJOR); -MODULE_ALIAS("platform:pnx8xxx-uart"); |