diff options
Diffstat (limited to 'drivers/tty/serial/cpm_uart')
| -rw-r--r-- | drivers/tty/serial/cpm_uart/Makefile | 12 | ||||
| -rw-r--r-- | drivers/tty/serial/cpm_uart/cpm_uart.h | 142 | ||||
| -rw-r--r-- | drivers/tty/serial/cpm_uart/cpm_uart_core.c | 1491 | ||||
| -rw-r--r-- | drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c | 122 | ||||
| -rw-r--r-- | drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h | 33 | ||||
| -rw-r--r-- | drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c | 156 | ||||
| -rw-r--r-- | drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h | 33 |
7 files changed, 0 insertions, 1989 deletions
diff --git a/drivers/tty/serial/cpm_uart/Makefile b/drivers/tty/serial/cpm_uart/Makefile deleted file mode 100644 index 3f3a6ed02ed4..000000000000 --- a/drivers/tty/serial/cpm_uart/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the Motorola 8xx FEC ethernet controller -# - -obj-$(CONFIG_SERIAL_CPM) += cpm_uart.o - -# Select the correct platform objects. -cpm_uart-objs-$(CONFIG_CPM2) += cpm_uart_cpm2.o -cpm_uart-objs-$(CONFIG_CPM1) += cpm_uart_cpm1.o - -cpm_uart-objs := cpm_uart_core.o $(cpm_uart-objs-y) diff --git a/drivers/tty/serial/cpm_uart/cpm_uart.h b/drivers/tty/serial/cpm_uart/cpm_uart.h deleted file mode 100644 index 46c03ed71c31..000000000000 --- a/drivers/tty/serial/cpm_uart/cpm_uart.h +++ /dev/null @@ -1,142 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Driver for CPM (SCC/SMC) serial ports - * - * Copyright (C) 2004 Freescale Semiconductor, Inc. - * - * 2006 (c) MontaVista Software, Inc. - * Vitaly Bordug <vbordug@ru.mvista.com> - */ -#ifndef CPM_UART_H -#define CPM_UART_H - -#include <linux/platform_device.h> -#include <linux/fs_uart_pd.h> - -struct gpio_desc; - -#if defined(CONFIG_CPM2) -#include "cpm_uart_cpm2.h" -#elif defined(CONFIG_CPM1) -#include "cpm_uart_cpm1.h" -#endif - -#define SERIAL_CPM_MAJOR 204 -#define SERIAL_CPM_MINOR 46 - -#define IS_SMC(pinfo) (pinfo->flags & FLAG_SMC) -#define IS_DISCARDING(pinfo) (pinfo->flags & FLAG_DISCARDING) -#define FLAG_DISCARDING 0x00000004 /* when set, don't discard */ -#define FLAG_SMC 0x00000002 -#define FLAG_CONSOLE 0x00000001 - -#define UART_SMC1 fsid_smc1_uart -#define UART_SMC2 fsid_smc2_uart -#define UART_SCC1 fsid_scc1_uart -#define UART_SCC2 fsid_scc2_uart -#define UART_SCC3 fsid_scc3_uart -#define UART_SCC4 fsid_scc4_uart - -#define UART_NR fs_uart_nr - -#define RX_NUM_FIFO 4 -#define RX_BUF_SIZE 32 -#define TX_NUM_FIFO 4 -#define TX_BUF_SIZE 32 - -#define SCC_WAIT_CLOSING 100 - -#define GPIO_CTS 0 -#define GPIO_RTS 1 -#define GPIO_DCD 2 -#define GPIO_DSR 3 -#define GPIO_DTR 4 -#define GPIO_RI 5 - -#define NUM_GPIOS (GPIO_RI+1) - -struct uart_cpm_port { - struct uart_port port; - u16 rx_nrfifos; - u16 rx_fifosize; - u16 tx_nrfifos; - u16 tx_fifosize; - smc_t __iomem *smcp; - smc_uart_t __iomem *smcup; - scc_t __iomem *sccp; - scc_uart_t __iomem *sccup; - cbd_t __iomem *rx_bd_base; - cbd_t __iomem *rx_cur; - cbd_t __iomem *tx_bd_base; - cbd_t __iomem *tx_cur; - unsigned char *tx_buf; - unsigned char *rx_buf; - u32 flags; - struct clk *clk; - u8 brg; - uint dp_addr; - void *mem_addr; - dma_addr_t dma_addr; - u32 mem_size; - /* wait on close if needed */ - int wait_closing; - /* value to combine with opcode to form cpm command */ - u32 command; - struct gpio_desc *gpios[NUM_GPIOS]; -}; - -extern struct uart_cpm_port cpm_uart_ports[UART_NR]; - -/* these are located in their respective files */ -void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd); -void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, - struct device_node *np); -void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram); -int cpm_uart_init_portdesc(void); -int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con); -void cpm_uart_freebuf(struct uart_cpm_port *pinfo); - -void smc1_lineif(struct uart_cpm_port *pinfo); -void smc2_lineif(struct uart_cpm_port *pinfo); -void scc1_lineif(struct uart_cpm_port *pinfo); -void scc2_lineif(struct uart_cpm_port *pinfo); -void scc3_lineif(struct uart_cpm_port *pinfo); -void scc4_lineif(struct uart_cpm_port *pinfo); - -/* - virtual to phys transtalion -*/ -static inline unsigned long cpu2cpm_addr(void *addr, - struct uart_cpm_port *pinfo) -{ - int offset; - u32 val = (u32)addr; - u32 mem = (u32)pinfo->mem_addr; - /* sane check */ - if (likely(val >= mem && val < mem + pinfo->mem_size)) { - offset = val - mem; - return pinfo->dma_addr + offset; - } - /* something nasty happened */ - BUG(); - return 0; -} - -static inline void *cpm2cpu_addr(unsigned long addr, - struct uart_cpm_port *pinfo) -{ - int offset; - u32 val = addr; - u32 dma = (u32)pinfo->dma_addr; - /* sane check */ - if (likely(val >= dma && val < dma + pinfo->mem_size)) { - offset = val - dma; - return pinfo->mem_addr + offset; - } - /* something nasty happened */ - BUG(); - return NULL; -} - - -#endif /* CPM_UART_H */ diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c deleted file mode 100644 index 66afa9bea6bf..000000000000 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ /dev/null @@ -1,1491 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Driver for CPM (SCC/SMC) serial ports; core driver - * - * Based on arch/ppc/cpm2_io/uart.c by Dan Malek - * Based on ppc8xx.c by Thomas Gleixner - * Based on drivers/serial/amba.c by Russell King - * - * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) - * Pantelis Antoniou (panto@intracom.gr) (CPM1) - * - * Copyright (C) 2004, 2007 Freescale Semiconductor, Inc. - * (C) 2004 Intracom, S.A. - * (C) 2005-2006 MontaVista Software, Inc. - * Vitaly Bordug <vbordug@ru.mvista.com> - */ - -#include <linux/module.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/serial.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/device.h> -#include <linux/memblock.h> -#include <linux/dma-mapping.h> -#include <linux/fs_uart_pd.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <linux/gpio/consumer.h> -#include <linux/clk.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/delay.h> -#include <asm/fs_pd.h> -#include <asm/udbg.h> - -#include <linux/serial_core.h> -#include <linux/kernel.h> - -#include "cpm_uart.h" - - -/**************************************************************/ - -static int cpm_uart_tx_pump(struct uart_port *port); -static void cpm_uart_init_smc(struct uart_cpm_port *pinfo); -static void cpm_uart_init_scc(struct uart_cpm_port *pinfo); -static void cpm_uart_initbd(struct uart_cpm_port *pinfo); - -/**************************************************************/ - -#define HW_BUF_SPD_THRESHOLD 2400 - -/* - * Check, if transmit buffers are processed -*/ -static unsigned int cpm_uart_tx_empty(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = - container_of(port, struct uart_cpm_port, port); - cbd_t __iomem *bdp = pinfo->tx_bd_base; - int ret = 0; - - while (1) { - if (in_be16(&bdp->cbd_sc) & BD_SC_READY) - break; - - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) { - ret = TIOCSER_TEMT; - break; - } - bdp++; - } - - pr_debug("CPM uart[%d]:tx_empty: %d\n", port->line, ret); - - return ret; -} - -static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_cpm_port *pinfo = - container_of(port, struct uart_cpm_port, port); - - if (pinfo->gpios[GPIO_RTS]) - gpiod_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS)); - - if (pinfo->gpios[GPIO_DTR]) - gpiod_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR)); -} - -static unsigned int cpm_uart_get_mctrl(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = - container_of(port, struct uart_cpm_port, port); - unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - - if (pinfo->gpios[GPIO_CTS]) { - if (gpiod_get_value(pinfo->gpios[GPIO_CTS])) - mctrl &= ~TIOCM_CTS; - } - - if (pinfo->gpios[GPIO_DSR]) { - if (gpiod_get_value(pinfo->gpios[GPIO_DSR])) - mctrl &= ~TIOCM_DSR; - } - - if (pinfo->gpios[GPIO_DCD]) { - if (gpiod_get_value(pinfo->gpios[GPIO_DCD])) - mctrl &= ~TIOCM_CAR; - } - - if (pinfo->gpios[GPIO_RI]) { - if (!gpiod_get_value(pinfo->gpios[GPIO_RI])) - mctrl |= TIOCM_RNG; - } - - return mctrl; -} - -/* - * Stop transmitter - */ -static void cpm_uart_stop_tx(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = - container_of(port, struct uart_cpm_port, port); - smc_t __iomem *smcp = pinfo->smcp; - scc_t __iomem *sccp = pinfo->sccp; - - pr_debug("CPM uart[%d]:stop tx\n", port->line); - - if (IS_SMC(pinfo)) - clrbits8(&smcp->smc_smcm, SMCM_TX); - else - clrbits16(&sccp->scc_sccm, UART_SCCM_TX); -} - -/* - * Start transmitter - */ -static void cpm_uart_start_tx(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = - container_of(port, struct uart_cpm_port, port); - smc_t __iomem *smcp = pinfo->smcp; - scc_t __iomem *sccp = pinfo->sccp; - - pr_debug("CPM uart[%d]:start tx\n", port->line); - - if (IS_SMC(pinfo)) { - if (in_8(&smcp->smc_smcm) & SMCM_TX) - return; - } else { - if (in_be16(&sccp->scc_sccm) & UART_SCCM_TX) - return; - } - - if (cpm_uart_tx_pump(port) != 0) { - if (IS_SMC(pinfo)) { - setbits8(&smcp->smc_smcm, SMCM_TX); - } else { - setbits16(&sccp->scc_sccm, UART_SCCM_TX); - } - } -} - -/* - * Stop receiver - */ -static void cpm_uart_stop_rx(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = - container_of(port, struct uart_cpm_port, port); - smc_t __iomem *smcp = pinfo->smcp; - scc_t __iomem *sccp = pinfo->sccp; - - pr_debug("CPM uart[%d]:stop rx\n", port->line); - - if (IS_SMC(pinfo)) - clrbits8(&smcp->smc_smcm, SMCM_RX); - else - clrbits16(&sccp->scc_sccm, UART_SCCM_RX); -} - -/* - * Generate a break. - */ -static void cpm_uart_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_cpm_port *pinfo = - container_of(port, struct uart_cpm_port, port); - - pr_debug("CPM uart[%d]:break ctrl, break_state: %d\n", port->line, - break_state); - - if (break_state) - cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); - else - cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX); -} - -/* - * Transmit characters, refill buffer descriptor, if possible - */ -static void cpm_uart_int_tx(struct uart_port *port) -{ - pr_debug("CPM uart[%d]:TX INT\n", port->line); - - cpm_uart_tx_pump(port); -} - -#ifdef CONFIG_CONSOLE_POLL -static int serial_polled; -#endif - -/* - * Receive characters - */ -static void cpm_uart_int_rx(struct uart_port *port) -{ - int i; - unsigned char ch; - u8 *cp; - struct tty_port *tport = &port->state->port; - struct uart_cpm_port *pinfo = - container_of(port, struct uart_cpm_port, port); - cbd_t __iomem *bdp; - u16 status; - unsigned int flg; - - pr_debug("CPM uart[%d]:RX INT\n", port->line); - - /* Just loop through the closed BDs and copy the characters into - * the buffer. - */ - bdp = pinfo->rx_cur; - for (;;) { -#ifdef CONFIG_CONSOLE_POLL - if (unlikely(serial_polled)) { - serial_polled = 0; - return; - } -#endif - /* get status */ - status = in_be16(&bdp->cbd_sc); - /* If this one is empty, return happy */ - if (status & BD_SC_EMPTY) - break; - - /* get number of characters, and check spce in flip-buffer */ - i = in_be16(&bdp->cbd_datlen); - - /* If we have not enough room in tty flip buffer, then we try - * later, which will be the next rx-interrupt or a timeout - */ - if (tty_buffer_request_room(tport, i) < i) { - printk(KERN_WARNING "No room in flip buffer\n"); - return; - } - - /* get pointer */ - cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); - - /* loop through the buffer */ - while (i-- > 0) { - ch = *cp++; - port->icount.rx++; - flg = TTY_NORMAL; - - if (status & - (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV)) - goto handle_error; - if (uart_handle_sysrq_char(port, ch)) - continue; -#ifdef CONFIG_CONSOLE_POLL - if (unlikely(serial_polled)) { - serial_polled = 0; - return; - } -#endif - error_return: - tty_insert_flip_char(tport, ch, flg); - - } /* End while (i--) */ - - /* This BD is ready to be used again. Clear status. get next */ - clrbits16(&bdp->cbd_sc, BD_SC_BR | BD_SC_FR | BD_SC_PR | - BD_SC_OV | BD_SC_ID); - setbits16(&bdp->cbd_sc, BD_SC_EMPTY); - - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = pinfo->rx_bd_base; - else - bdp++; - - } /* End for (;;) */ - - /* Write back buffer pointer */ - pinfo->rx_cur = bdp; - - /* activate BH processing */ - tty_flip_buffer_push(tport); - - return; - - /* Error processing */ - - handle_error: - /* Statistics */ - if (status & BD_SC_BR) - port->icount.brk++; - if (status & BD_SC_PR) - port->icount.parity++; - if (status & BD_SC_FR) - port->icount.frame++; - if (status & BD_SC_OV) - port->icount.overrun++; - - /* Mask out ignored conditions */ - status &= port->read_status_mask; - - /* Handle the remaining ones */ - if (status & BD_SC_BR) - flg = TTY_BREAK; - else if (status & BD_SC_PR) - flg = TTY_PARITY; - else if (status & BD_SC_FR) - flg = TTY_FRAME; - - /* overrun does not affect the current character ! */ - if (status & BD_SC_OV) { - ch = 0; - flg = TTY_OVERRUN; - /* We skip this buffer */ - /* CHECK: Is really nothing senseful there */ - /* ASSUMPTION: it contains nothing valid */ - i = 0; - } - port->sysrq = 0; - goto error_return; -} - -/* - * Asynchron mode interrupt handler - */ -static irqreturn_t cpm_uart_int(int irq, void *data) -{ - u8 events; - struct uart_port *port = data; - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - smc_t __iomem *smcp = pinfo->smcp; - scc_t __iomem *sccp = pinfo->sccp; - - pr_debug("CPM uart[%d]:IRQ\n", port->line); - - if (IS_SMC(pinfo)) { - events = in_8(&smcp->smc_smce); - out_8(&smcp->smc_smce, events); - if (events & SMCM_BRKE) - uart_handle_break(port); - if (events & SMCM_RX) - cpm_uart_int_rx(port); - if (events & SMCM_TX) - cpm_uart_int_tx(port); - } else { - events = in_be16(&sccp->scc_scce); - out_be16(&sccp->scc_scce, events); - if (events & UART_SCCM_BRKE) - uart_handle_break(port); - if (events & UART_SCCM_RX) - cpm_uart_int_rx(port); - if (events & UART_SCCM_TX) - cpm_uart_int_tx(port); - } - return (events) ? IRQ_HANDLED : IRQ_NONE; -} - -static int cpm_uart_startup(struct uart_port *port) -{ - int retval; - struct uart_cpm_port *pinfo = - container_of(port, struct uart_cpm_port, port); - - pr_debug("CPM uart[%d]:startup\n", port->line); - - /* If the port is not the console, make sure rx is disabled. */ - if (!(pinfo->flags & FLAG_CONSOLE)) { - /* Disable UART rx */ - if (IS_SMC(pinfo)) { - clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN); - clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX); - } else { - clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR); - clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX); - } - cpm_uart_initbd(pinfo); - if (IS_SMC(pinfo)) { - out_be32(&pinfo->smcup->smc_rstate, 0); - out_be32(&pinfo->smcup->smc_tstate, 0); - out_be16(&pinfo->smcup->smc_rbptr, - in_be16(&pinfo->smcup->smc_rbase)); - out_be16(&pinfo->smcup->smc_tbptr, - in_be16(&pinfo->smcup->smc_tbase)); - } else { - cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); - } - } - /* Install interrupt handler. */ - retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port); - if (retval) - return retval; - - /* Startup rx-int */ - if (IS_SMC(pinfo)) { - setbits8(&pinfo->smcp->smc_smcm, SMCM_RX); - setbits16(&pinfo->smcp->smc_smcmr, (SMCMR_REN | SMCMR_TEN)); - } else { - setbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX); - setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT)); - } - - return 0; -} - -inline void cpm_uart_wait_until_send(struct uart_cpm_port *pinfo) -{ - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(pinfo->wait_closing); -} - -/* - * Shutdown the uart - */ -static void cpm_uart_shutdown(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = - container_of(port, struct uart_cpm_port, port); - - pr_debug("CPM uart[%d]:shutdown\n", port->line); - - /* free interrupt handler */ - free_irq(port->irq, port); - - /* If the port is not the console, disable Rx and Tx. */ - if (!(pinfo->flags & FLAG_CONSOLE)) { - /* Wait for all the BDs marked sent */ - while(!cpm_uart_tx_empty(port)) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(2); - } - - if (pinfo->wait_closing) - cpm_uart_wait_until_send(pinfo); - - /* Stop uarts */ - if (IS_SMC(pinfo)) { - smc_t __iomem *smcp = pinfo->smcp; - clrbits16(&smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); - clrbits8(&smcp->smc_smcm, SMCM_RX | SMCM_TX); - } else { - scc_t __iomem *sccp = pinfo->sccp; - clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); - clrbits16(&sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); - } - - /* Shut them really down and reinit buffer descriptors */ - if (IS_SMC(pinfo)) { - out_be16(&pinfo->smcup->smc_brkcr, 0); - cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); - } else { - out_be16(&pinfo->sccup->scc_brkcr, 0); - cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); - } - - cpm_uart_initbd(pinfo); - } -} - -static void cpm_uart_set_termios(struct uart_port *port, - struct ktermios *termios, - const struct ktermios *old) -{ - int baud; - unsigned long flags; - u16 cval, scval, prev_mode; - struct uart_cpm_port *pinfo = - container_of(port, struct uart_cpm_port, port); - smc_t __iomem *smcp = pinfo->smcp; - scc_t __iomem *sccp = pinfo->sccp; - int maxidl; - - pr_debug("CPM uart[%d]:set_termios\n", port->line); - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); - if (baud < HW_BUF_SPD_THRESHOLD || port->flags & UPF_LOW_LATENCY) - pinfo->rx_fifosize = 1; - else - pinfo->rx_fifosize = RX_BUF_SIZE; - - /* MAXIDL is the timeout after which a receive buffer is closed - * when not full if no more characters are received. - * We calculate it from the baudrate so that the duration is - * always the same at standard rates: about 4ms. - */ - maxidl = baud / 2400; - if (maxidl < 1) - maxidl = 1; - if (maxidl > 0x10) - maxidl = 0x10; - - cval = 0; - scval = 0; - - if (termios->c_cflag & CSTOPB) { - cval |= SMCMR_SL; /* Two stops */ - scval |= SCU_PSMR_SL; - } - - if (termios->c_cflag & PARENB) { - cval |= SMCMR_PEN; - scval |= SCU_PSMR_PEN; - if (!(termios->c_cflag & PARODD)) { - cval |= SMCMR_PM_EVEN; - scval |= (SCU_PSMR_REVP | SCU_PSMR_TEVP); - } - } - - /* - * Update the timeout - */ - uart_update_timeout(port, termios->c_cflag, baud); - - /* - * Set up parity check flag - */ - port->read_status_mask = (BD_SC_EMPTY | BD_SC_OV); - if (termios->c_iflag & INPCK) - port->read_status_mask |= BD_SC_FR | BD_SC_PR; - if ((termios->c_iflag & BRKINT) || (termios->c_iflag & PARMRK)) - port->read_status_mask |= BD_SC_BR; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= BD_SC_PR | BD_SC_FR; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= BD_SC_BR; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= BD_SC_OV; - } - /* - * !!! ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - port->read_status_mask &= ~BD_SC_EMPTY; - - spin_lock_irqsave(&port->lock, flags); - - if (IS_SMC(pinfo)) { - unsigned int bits = tty_get_frame_size(termios->c_cflag); - - /* - * MRBLR can be changed while an SMC/SCC is operating only - * if it is done in a single bus cycle with one 16-bit move - * (not two 8-bit bus cycles back-to-back). This occurs when - * the cp shifts control to the next RxBD, so the change does - * not take effect immediately. To guarantee the exact RxBD - * on which the change occurs, change MRBLR only while the - * SMC/SCC receiver is disabled. - */ - out_be16(&pinfo->smcup->smc_mrblr, pinfo->rx_fifosize); - out_be16(&pinfo->smcup->smc_maxidl, maxidl); - - /* Set the mode register. We want to keep a copy of the - * enables, because we want to put them back if they were - * present. - */ - prev_mode = in_be16(&smcp->smc_smcmr) & (SMCMR_REN | SMCMR_TEN); - /* Output in *one* operation, so we don't interrupt RX/TX if they - * were already enabled. - * Character length programmed into the register is frame bits minus 1. - */ - out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits - 1) | cval | - SMCMR_SM_UART | prev_mode); - } else { - unsigned int bits = tty_get_char_size(termios->c_cflag); - - out_be16(&pinfo->sccup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); - out_be16(&pinfo->sccup->scc_maxidl, maxidl); - out_be16(&sccp->scc_psmr, (UART_LCR_WLEN(bits) << 12) | scval); - } - - if (pinfo->clk) - clk_set_rate(pinfo->clk, baud); - else - cpm_set_brg(pinfo->brg - 1, baud); - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *cpm_uart_type(struct uart_port *port) -{ - pr_debug("CPM uart[%d]:uart_type\n", port->line); - - return port->type == PORT_CPM ? "CPM UART" : NULL; -} - -/* - * verify the new serial_struct (for TIOCSSERIAL). - */ -static int cpm_uart_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - int ret = 0; - - pr_debug("CPM uart[%d]:verify_port\n", port->line); - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM) - ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= nr_irqs) - ret = -EINVAL; - if (ser->baud_base < 9600) - ret = -EINVAL; - return ret; -} - -/* - * Transmit characters, refill buffer descriptor, if possible - */ -static int cpm_uart_tx_pump(struct uart_port *port) -{ - cbd_t __iomem *bdp; - u8 *p; - int count; - struct uart_cpm_port *pinfo = - container_of(port, struct uart_cpm_port, port); - struct circ_buf *xmit = &port->state->xmit; - - /* Handle xon/xoff */ - if (port->x_char) { - /* Pick next descriptor and fill from buffer */ - bdp = pinfo->tx_cur; - - p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); - - *p++ = port->x_char; - - out_be16(&bdp->cbd_datlen, 1); - setbits16(&bdp->cbd_sc, BD_SC_READY); - /* Get next BD. */ - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = pinfo->tx_bd_base; - else - bdp++; - pinfo->tx_cur = bdp; - - port->icount.tx++; - port->x_char = 0; - return 1; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - cpm_uart_stop_tx(port); - return 0; - } - - /* Pick next descriptor and fill from buffer */ - bdp = pinfo->tx_cur; - - while (!(in_be16(&bdp->cbd_sc) & BD_SC_READY) && !uart_circ_empty(xmit)) { - count = 0; - p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); - while (count < pinfo->tx_fifosize) { - *p++ = xmit->buf[xmit->tail]; - uart_xmit_advance(port, 1); - count++; - if (uart_circ_empty(xmit)) - break; - } - out_be16(&bdp->cbd_datlen, count); - setbits16(&bdp->cbd_sc, BD_SC_READY); - /* Get next BD. */ - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = pinfo->tx_bd_base; - else - bdp++; - } - pinfo->tx_cur = bdp; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) { - cpm_uart_stop_tx(port); - return 0; - } - - return 1; -} - -/* - * init buffer descriptors - */ -static void cpm_uart_initbd(struct uart_cpm_port *pinfo) -{ - int i; - u8 *mem_addr; - cbd_t __iomem *bdp; - - pr_debug("CPM uart[%d]:initbd\n", pinfo->port.line); - - /* Set the physical address of the host memory - * buffers in the buffer descriptors, and the - * virtual address for us to work with. - */ - mem_addr = pinfo->mem_addr; - bdp = pinfo->rx_cur = pinfo->rx_bd_base; - for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) { - out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); - out_be16(&bdp->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT); - mem_addr += pinfo->rx_fifosize; - } - - out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); - out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT); - - /* Set the physical address of the host memory - * buffers in the buffer descriptors, and the - * virtual address for us to work with. - */ - mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize); - bdp = pinfo->tx_cur = pinfo->tx_bd_base; - for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) { - out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); - out_be16(&bdp->cbd_sc, BD_SC_INTRPT); - mem_addr += pinfo->tx_fifosize; - } - - out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); - out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_INTRPT); -} - -static void cpm_uart_init_scc(struct uart_cpm_port *pinfo) -{ - scc_t __iomem *scp; - scc_uart_t __iomem *sup; - - pr_debug("CPM uart[%d]:init_scc\n", pinfo->port.line); - - scp = pinfo->sccp; - sup = pinfo->sccup; - - /* Store address */ - out_be16(&pinfo->sccup->scc_genscc.scc_rbase, - (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE); - out_be16(&pinfo->sccup->scc_genscc.scc_tbase, - (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE); - - /* Set up the uart parameters in the - * parameter ram. - */ - - cpm_set_scc_fcr(sup); - - out_be16(&sup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); - out_be16(&sup->scc_maxidl, 0x10); - out_be16(&sup->scc_brkcr, 1); - out_be16(&sup->scc_parec, 0); - out_be16(&sup->scc_frmec, 0); - out_be16(&sup->scc_nosec, 0); - out_be16(&sup->scc_brkec, 0); - out_be16(&sup->scc_uaddr1, 0); - out_be16(&sup->scc_uaddr2, 0); - out_be16(&sup->scc_toseq, 0); - out_be16(&sup->scc_char1, 0x8000); - out_be16(&sup->scc_char2, 0x8000); - out_be16(&sup->scc_char3, 0x8000); - out_be16(&sup->scc_char4, 0x8000); - out_be16(&sup->scc_char5, 0x8000); - out_be16(&sup->scc_char6, 0x8000); - out_be16(&sup->scc_char7, 0x8000); - out_be16(&sup->scc_char8, 0x8000); - out_be16(&sup->scc_rccm, 0xc0ff); - - /* Send the CPM an initialize command. - */ - cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - out_be32(&scp->scc_gsmrh, 0); - out_be32(&scp->scc_gsmrl, - SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); - - /* Enable rx interrupts and clear all pending events. */ - out_be16(&scp->scc_sccm, 0); - out_be16(&scp->scc_scce, 0xffff); - out_be16(&scp->scc_dsr, 0x7e7e); - out_be16(&scp->scc_psmr, 0x3000); - - setbits32(&scp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); -} - -static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) -{ - smc_t __iomem *sp; - smc_uart_t __iomem *up; - - pr_debug("CPM uart[%d]:init_smc\n", pinfo->port.line); - - sp = pinfo->smcp; - up = pinfo->smcup; - - /* Store address */ - out_be16(&pinfo->smcup->smc_rbase, - (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE); - out_be16(&pinfo->smcup->smc_tbase, - (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE); - -/* - * In case SMC is being relocated... - */ - out_be16(&up->smc_rbptr, in_be16(&pinfo->smcup->smc_rbase)); - out_be16(&up->smc_tbptr, in_be16(&pinfo->smcup->smc_tbase)); - out_be32(&up->smc_rstate, 0); - out_be32(&up->smc_tstate, 0); - out_be16(&up->smc_brkcr, 1); /* number of break chars */ - out_be16(&up->smc_brkec, 0); - - /* Set up the uart parameters in the - * parameter ram. - */ - cpm_set_smc_fcr(up); - - /* Using idle character time requires some additional tuning. */ - out_be16(&up->smc_mrblr, pinfo->rx_fifosize); - out_be16(&up->smc_maxidl, 0x10); - out_be16(&up->smc_brklen, 0); - out_be16(&up->smc_brkec, 0); - out_be16(&up->smc_brkcr, 1); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - out_be16(&sp->smc_smcmr, smcr_mk_clen(9) | SMCMR_SM_UART); - - /* Enable only rx interrupts clear all pending events. */ - out_8(&sp->smc_smcm, 0); - out_8(&sp->smc_smce, 0xff); - - setbits16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN); -} - -/* - * Initialize port. This is called from early_console stuff - * so we have to be careful here ! - */ -static int cpm_uart_request_port(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = - container_of(port, struct uart_cpm_port, port); - int ret; - - pr_debug("CPM uart[%d]:request port\n", port->line); - - if (pinfo->flags & FLAG_CONSOLE) - return 0; - - if (IS_SMC(pinfo)) { - clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX); - clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); - } else { - clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); - clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); - } - - ret = cpm_uart_allocbuf(pinfo, 0); - - if (ret) - return ret; - - cpm_uart_initbd(pinfo); - if (IS_SMC(pinfo)) - cpm_uart_init_smc(pinfo); - else - cpm_uart_init_scc(pinfo); - - return 0; -} - -static void cpm_uart_release_port(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = - container_of(port, struct uart_cpm_port, port); - - if (!(pinfo->flags & FLAG_CONSOLE)) - cpm_uart_freebuf(pinfo); -} - -/* - * Configure/autoconfigure the port. - */ -static void cpm_uart_config_port(struct uart_port *port, int flags) -{ - pr_debug("CPM uart[%d]:config_port\n", port->line); - - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_CPM; - cpm_uart_request_port(port); - } -} - -#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_CPM_CONSOLE) -/* - * Write a string to the serial port - * Note that this is called with interrupts already disabled - */ -static void cpm_uart_early_write(struct uart_cpm_port *pinfo, - const char *string, u_int count, bool handle_linefeed) -{ - unsigned int i; - cbd_t __iomem *bdp, *bdbase; - unsigned char *cpm_outp_addr; - - /* Get the address of the host memory buffer. - */ - bdp = pinfo->tx_cur; - bdbase = pinfo->tx_bd_base; - - /* - * Now, do each character. This is not as bad as it looks - * since this is a holding FIFO and not a transmitting FIFO. - * We could add the complexity of filling the entire transmit - * buffer, but we would just wait longer between accesses...... - */ - for (i = 0; i < count; i++, string++) { - /* Wait for transmitter fifo to empty. - * Ready indicates output is ready, and xmt is doing - * that, not that it is ready for us to send. - */ - while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) - ; - - /* Send the character out. - * If the buffer address is in the CPM DPRAM, don't - * convert it. - */ - cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), - pinfo); - *cpm_outp_addr = *string; - - out_be16(&bdp->cbd_datlen, 1); - setbits16(&bdp->cbd_sc, BD_SC_READY); - - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = bdbase; - else - bdp++; - - /* if a LF, also do CR... */ - if (handle_linefeed && *string == 10) { - while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) - ; - - cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), - pinfo); - *cpm_outp_addr = 13; - - out_be16(&bdp->cbd_datlen, 1); - setbits16(&bdp->cbd_sc, BD_SC_READY); - - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = bdbase; - else - bdp++; - } - } - - /* - * Finally, Wait for transmitter & holding register to empty - * and restore the IER - */ - while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) - ; - - pinfo->tx_cur = bdp; -} -#endif - -#ifdef CONFIG_CONSOLE_POLL -/* Serial polling routines for writing and reading from the uart while - * in an interrupt or debug context. - */ - -#define GDB_BUF_SIZE 512 /* power of 2, please */ - -static char poll_buf[GDB_BUF_SIZE]; -static char *pollp; -static int poll_chars; - -static int poll_wait_key(char *obuf, struct uart_cpm_port *pinfo) -{ - u_char c, *cp; - volatile cbd_t *bdp; - int i; - - /* Get the address of the host memory buffer. - */ - bdp = pinfo->rx_cur; - if (bdp->cbd_sc & BD_SC_EMPTY) - return NO_POLL_CHAR; - - /* If the buffer address is in the CPM DPRAM, don't - * convert it. - */ - cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); - - if (obuf) { - i = c = bdp->cbd_datlen; - while (i-- > 0) - *obuf++ = *cp++; - } else - c = *cp; - bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID); - bdp->cbd_sc |= BD_SC_EMPTY; - - if (bdp->cbd_sc & BD_SC_WRAP) - bdp = pinfo->rx_bd_base; - else - bdp++; - pinfo->rx_cur = (cbd_t *)bdp; - - return (int)c; -} - -static int cpm_get_poll_char(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = - container_of(port, struct uart_cpm_port, port); - - if (!serial_polled) { - serial_polled = 1; - poll_chars = 0; - } - if (poll_chars <= 0) { - int ret = poll_wait_key(poll_buf, pinfo); - - if (ret == NO_POLL_CHAR) - return ret; - poll_chars = ret; - pollp = poll_buf; - } - poll_chars--; - return *pollp++; -} - -static void cpm_put_poll_char(struct uart_port *port, - unsigned char c) -{ - struct uart_cpm_port *pinfo = - container_of(port, struct uart_cpm_port, port); - static char ch[2]; - - ch[0] = (char)c; - cpm_uart_early_write(pinfo, ch, 1, false); -} - -#ifdef CONFIG_SERIAL_CPM_CONSOLE -static struct uart_port *udbg_port; - -static void udbg_cpm_putc(char c) -{ - if (c == '\n') - cpm_put_poll_char(udbg_port, '\r'); - cpm_put_poll_char(udbg_port, c); -} - -static int udbg_cpm_getc_poll(void) -{ - int c = cpm_get_poll_char(udbg_port); - - return c == NO_POLL_CHAR ? -1 : c; -} - -static int udbg_cpm_getc(void) -{ - int c; - - while ((c = udbg_cpm_getc_poll()) == -1) - cpu_relax(); - return c; -} -#endif /* CONFIG_SERIAL_CPM_CONSOLE */ - -#endif /* CONFIG_CONSOLE_POLL */ - -static const struct uart_ops cpm_uart_pops = { - .tx_empty = cpm_uart_tx_empty, - .set_mctrl = cpm_uart_set_mctrl, - .get_mctrl = cpm_uart_get_mctrl, - .stop_tx = cpm_uart_stop_tx, - .start_tx = cpm_uart_start_tx, - .stop_rx = cpm_uart_stop_rx, - .break_ctl = cpm_uart_break_ctl, - .startup = cpm_uart_startup, - .shutdown = cpm_uart_shutdown, - .set_termios = cpm_uart_set_termios, - .type = cpm_uart_type, - .release_port = cpm_uart_release_port, - .request_port = cpm_uart_request_port, - .config_port = cpm_uart_config_port, - .verify_port = cpm_uart_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = cpm_get_poll_char, - .poll_put_char = cpm_put_poll_char, -#endif -}; - -struct uart_cpm_port cpm_uart_ports[UART_NR]; - -static int cpm_uart_init_port(struct device_node *np, - struct uart_cpm_port *pinfo) -{ - const u32 *data; - void __iomem *mem, *pram; - struct device *dev = pinfo->port.dev; - int len; - int ret; - int i; - - data = of_get_property(np, "clock", NULL); - if (data) { - struct clk *clk = clk_get(NULL, (const char*)data); - if (!IS_ERR(clk)) - pinfo->clk = clk; - } - if (!pinfo->clk) { - data = of_get_property(np, "fsl,cpm-brg", &len); - if (!data || len != 4) { - printk(KERN_ERR "CPM UART %pOFn has no/invalid " - "fsl,cpm-brg property.\n", np); - return -EINVAL; - } - pinfo->brg = *data; - } - - data = of_get_property(np, "fsl,cpm-command", &len); - if (!data || len != 4) { - printk(KERN_ERR "CPM UART %pOFn has no/invalid " - "fsl,cpm-command property.\n", np); - return -EINVAL; - } - pinfo->command = *data; - - mem = of_iomap(np, 0); - if (!mem) - return -ENOMEM; - - if (of_device_is_compatible(np, "fsl,cpm1-scc-uart") || - of_device_is_compatible(np, "fsl,cpm2-scc-uart")) { - pinfo->sccp = mem; - pinfo->sccup = pram = cpm_uart_map_pram(pinfo, np); - } else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") || - of_device_is_compatible(np, "fsl,cpm2-smc-uart")) { - pinfo->flags |= FLAG_SMC; - pinfo->smcp = mem; - pinfo->smcup = pram = cpm_uart_map_pram(pinfo, np); - } else { - ret = -ENODEV; - goto out_mem; - } - - if (!pram) { - ret = -ENOMEM; - goto out_mem; - } - - pinfo->tx_nrfifos = TX_NUM_FIFO; - pinfo->tx_fifosize = TX_BUF_SIZE; - pinfo->rx_nrfifos = RX_NUM_FIFO; - pinfo->rx_fifosize = RX_BUF_SIZE; - - pinfo->port.uartclk = ppc_proc_freq; - pinfo->port.mapbase = (unsigned long)mem; - pinfo->port.type = PORT_CPM; - pinfo->port.ops = &cpm_uart_pops; - pinfo->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_CPM_CONSOLE); - pinfo->port.iotype = UPIO_MEM; - pinfo->port.fifosize = pinfo->tx_nrfifos * pinfo->tx_fifosize; - spin_lock_init(&pinfo->port.lock); - - for (i = 0; i < NUM_GPIOS; i++) { - struct gpio_desc *gpiod; - - pinfo->gpios[i] = NULL; - - gpiod = devm_gpiod_get_index_optional(dev, NULL, i, GPIOD_ASIS); - - if (IS_ERR(gpiod)) { - ret = PTR_ERR(gpiod); - goto out_pram; - } - - if (gpiod) { - if (i == GPIO_RTS || i == GPIO_DTR) - ret = gpiod_direction_output(gpiod, 0); - else - ret = gpiod_direction_input(gpiod); - if (ret) { - pr_err("can't set direction for gpio #%d: %d\n", - i, ret); - continue; - } - pinfo->gpios[i] = gpiod; - } - } - -#ifdef CONFIG_PPC_EARLY_DEBUG_CPM -#if defined(CONFIG_CONSOLE_POLL) && defined(CONFIG_SERIAL_CPM_CONSOLE) - if (!udbg_port) -#endif - udbg_putc = NULL; -#endif - - return cpm_uart_request_port(&pinfo->port); - -out_pram: - cpm_uart_unmap_pram(pinfo, pram); -out_mem: - iounmap(mem); - return ret; -} - -#ifdef CONFIG_SERIAL_CPM_CONSOLE -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * Note that this is called with interrupts already disabled - */ -static void cpm_uart_console_write(struct console *co, const char *s, - u_int count) -{ - struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index]; - unsigned long flags; - int nolock = oops_in_progress; - - if (unlikely(nolock)) { - local_irq_save(flags); - } else { - spin_lock_irqsave(&pinfo->port.lock, flags); - } - - cpm_uart_early_write(pinfo, s, count, true); - - if (unlikely(nolock)) { - local_irq_restore(flags); - } else { - spin_unlock_irqrestore(&pinfo->port.lock, flags); - } -} - - -static int __init cpm_uart_console_setup(struct console *co, char *options) -{ - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - int ret; - struct uart_cpm_port *pinfo; - struct uart_port *port; - - struct device_node *np; - int i = 0; - - if (co->index >= UART_NR) { - printk(KERN_ERR "cpm_uart: console index %d too high\n", - co->index); - return -ENODEV; - } - - for_each_node_by_type(np, "serial") { - if (!of_device_is_compatible(np, "fsl,cpm1-smc-uart") && - !of_device_is_compatible(np, "fsl,cpm1-scc-uart") && - !of_device_is_compatible(np, "fsl,cpm2-smc-uart") && - !of_device_is_compatible(np, "fsl,cpm2-scc-uart")) - continue; - - if (i++ == co->index) - break; - } - - if (!np) - return -ENODEV; - - pinfo = &cpm_uart_ports[co->index]; - - pinfo->flags |= FLAG_CONSOLE; - port = &pinfo->port; - - ret = cpm_uart_init_port(np, pinfo); - of_node_put(np); - if (ret) - return ret; - - if (options) { - uart_parse_options(options, &baud, &parity, &bits, &flow); - } else { - if ((baud = uart_baudrate()) == -1) - baud = 9600; - } - - if (IS_SMC(pinfo)) { - out_be16(&pinfo->smcup->smc_brkcr, 0); - cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); - clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX); - clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); - } else { - out_be16(&pinfo->sccup->scc_brkcr, 0); - cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); - clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); - clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); - } - - ret = cpm_uart_allocbuf(pinfo, 1); - - if (ret) - return ret; - - cpm_uart_initbd(pinfo); - - if (IS_SMC(pinfo)) - cpm_uart_init_smc(pinfo); - else - cpm_uart_init_scc(pinfo); - - uart_set_options(port, co, baud, parity, bits, flow); - cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX); - -#ifdef CONFIG_CONSOLE_POLL - if (!udbg_port) { - udbg_port = &pinfo->port; - udbg_putc = udbg_cpm_putc; - udbg_getc = udbg_cpm_getc; - udbg_getc_poll = udbg_cpm_getc_poll; - } -#endif - - return 0; -} - -static struct uart_driver cpm_reg; -static struct console cpm_scc_uart_console = { - .name = "ttyCPM", - .write = cpm_uart_console_write, - .device = uart_console_device, - .setup = cpm_uart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &cpm_reg, -}; - -static int __init cpm_uart_console_init(void) -{ - cpm_muram_init(); - register_console(&cpm_scc_uart_console); - return 0; -} - -console_initcall(cpm_uart_console_init); - -#define CPM_UART_CONSOLE &cpm_scc_uart_console -#else -#define CPM_UART_CONSOLE NULL -#endif - -static struct uart_driver cpm_reg = { - .owner = THIS_MODULE, - .driver_name = "ttyCPM", - .dev_name = "ttyCPM", - .major = SERIAL_CPM_MAJOR, - .minor = SERIAL_CPM_MINOR, - .cons = CPM_UART_CONSOLE, - .nr = UART_NR, -}; - -static int probe_index; - -static int cpm_uart_probe(struct platform_device *ofdev) -{ - int index = probe_index++; - struct uart_cpm_port *pinfo = &cpm_uart_ports[index]; - int ret; - - pinfo->port.line = index; - - if (index >= UART_NR) - return -ENODEV; - - platform_set_drvdata(ofdev, pinfo); - - /* initialize the device pointer for the port */ - pinfo->port.dev = &ofdev->dev; - - pinfo->port.irq = irq_of_parse_and_map(ofdev->dev.of_node, 0); - if (!pinfo->port.irq) - return -EINVAL; - - ret = cpm_uart_init_port(ofdev->dev.of_node, pinfo); - if (!ret) - return uart_add_one_port(&cpm_reg, &pinfo->port); - - irq_dispose_mapping(pinfo->port.irq); - - return ret; -} - -static int cpm_uart_remove(struct platform_device *ofdev) -{ - struct uart_cpm_port *pinfo = platform_get_drvdata(ofdev); - - uart_remove_one_port(&cpm_reg, &pinfo->port); - - return 0; -} - -static const struct of_device_id cpm_uart_match[] = { - { - .compatible = "fsl,cpm1-smc-uart", - }, - { - .compatible = "fsl,cpm1-scc-uart", - }, - { - .compatible = "fsl,cpm2-smc-uart", - }, - { - .compatible = "fsl,cpm2-scc-uart", - }, - {} -}; -MODULE_DEVICE_TABLE(of, cpm_uart_match); - -static struct platform_driver cpm_uart_driver = { - .driver = { - .name = "cpm_uart", - .of_match_table = cpm_uart_match, - }, - .probe = cpm_uart_probe, - .remove = cpm_uart_remove, - }; - -static int __init cpm_uart_init(void) -{ - int ret = uart_register_driver(&cpm_reg); - if (ret) - return ret; - - ret = platform_driver_register(&cpm_uart_driver); - if (ret) - uart_unregister_driver(&cpm_reg); - - return ret; -} - -static void __exit cpm_uart_exit(void) -{ - platform_driver_unregister(&cpm_uart_driver); - uart_unregister_driver(&cpm_reg); -} - -module_init(cpm_uart_init); -module_exit(cpm_uart_exit); - -MODULE_AUTHOR("Kumar Gala/Antoniou Pantelis"); -MODULE_DESCRIPTION("CPM SCC/SMC port driver $Revision: 0.01 $"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV(SERIAL_CPM_MAJOR, SERIAL_CPM_MINOR); diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c deleted file mode 100644 index 56fc527015cb..000000000000 --- a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c +++ /dev/null @@ -1,122 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Driver for CPM (SCC/SMC) serial ports; CPM1 definitions - * - * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) - * Pantelis Antoniou (panto@intracom.gr) (CPM1) - * - * Copyright (C) 2004 Freescale Semiconductor, Inc. - * (C) 2004 Intracom, S.A. - * (C) 2006 MontaVista Software, Inc. - * Vitaly Bordug <vbordug@ru.mvista.com> - */ - -#include <linux/module.h> -#include <linux/tty.h> -#include <linux/gfp.h> -#include <linux/ioport.h> -#include <linux/serial.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/device.h> -#include <linux/memblock.h> -#include <linux/dma-mapping.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/fs_pd.h> - -#include <linux/serial_core.h> -#include <linux/kernel.h> - -#include <linux/of.h> -#include <linux/of_address.h> - -#include "cpm_uart.h" - -/**************************************************************/ - -void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) -{ - cpm_command(port->command, cmd); -} - -void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, - struct device_node *np) -{ - return of_iomap(np, 1); -} - -void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) -{ - iounmap(pram); -} - -/* - * Allocate DP-Ram and memory buffers. We need to allocate a transmit and - * receive buffer descriptors from dual port ram, and a character - * buffer area from host mem. If we are allocating for the console we need - * to do it from bootmem - */ -int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) -{ - int dpmemsz, memsz; - u8 *dp_mem; - unsigned long dp_offset; - u8 *mem_addr; - dma_addr_t dma_addr = 0; - - pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line); - - dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos); - dp_offset = cpm_dpalloc(dpmemsz, 8); - if (IS_ERR_VALUE(dp_offset)) { - printk(KERN_ERR - "cpm_uart_cpm1.c: could not allocate buffer descriptors\n"); - return -ENOMEM; - } - dp_mem = cpm_dpram_addr(dp_offset); - - memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + - L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); - if (is_con) { - /* was hostalloc but changed cause it blows away the */ - /* large tlb mapping when pinning the kernel area */ - mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8)); - dma_addr = (u32)cpm_dpram_phys(mem_addr); - } else - mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr, - GFP_KERNEL); - - if (mem_addr == NULL) { - cpm_dpfree(dp_offset); - printk(KERN_ERR - "cpm_uart_cpm1.c: could not allocate coherent memory\n"); - return -ENOMEM; - } - - pinfo->dp_addr = dp_offset; - pinfo->mem_addr = mem_addr; /* virtual address*/ - pinfo->dma_addr = dma_addr; /* physical address*/ - pinfo->mem_size = memsz; - - pinfo->rx_buf = mem_addr; - pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos - * pinfo->rx_fifosize); - - pinfo->rx_bd_base = (cbd_t __iomem __force *)dp_mem; - pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; - - return 0; -} - -void cpm_uart_freebuf(struct uart_cpm_port *pinfo) -{ - dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos * - pinfo->rx_fifosize) + - L1_CACHE_ALIGN(pinfo->tx_nrfifos * - pinfo->tx_fifosize), pinfo->mem_addr, - pinfo->dma_addr); - - cpm_dpfree(pinfo->dp_addr); -} diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h deleted file mode 100644 index 18ec0849918a..000000000000 --- a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Driver for CPM (SCC/SMC) serial ports - * - * definitions for cpm1 - * - */ - -#ifndef CPM_UART_CPM1_H -#define CPM_UART_CPM1_H - -#include <asm/cpm1.h> - -static inline void cpm_set_brg(int brg, int baud) -{ - cpm_setbrg(brg, baud); -} - -static inline void cpm_set_scc_fcr(scc_uart_t __iomem * sup) -{ - out_8(&sup->scc_genscc.scc_rfcr, SMC_EB); - out_8(&sup->scc_genscc.scc_tfcr, SMC_EB); -} - -static inline void cpm_set_smc_fcr(smc_uart_t __iomem * up) -{ - out_8(&up->smc_rfcr, SMC_EB); - out_8(&up->smc_tfcr, SMC_EB); -} - -#define DPRAM_BASE ((u8 __iomem __force *)cpm_dpram_addr(0)) - -#endif diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c deleted file mode 100644 index 108af254e8f3..000000000000 --- a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c +++ /dev/null @@ -1,156 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Driver for CPM (SCC/SMC) serial ports; CPM2 definitions - * - * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) - * Pantelis Antoniou (panto@intracom.gr) (CPM1) - * - * Copyright (C) 2004 Freescale Semiconductor, Inc. - * (C) 2004 Intracom, S.A. - * (C) 2006 MontaVista Software, Inc. - * Vitaly Bordug <vbordug@ru.mvista.com> - */ - -#include <linux/module.h> -#include <linux/tty.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/serial.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/device.h> -#include <linux/memblock.h> -#include <linux/dma-mapping.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/fs_pd.h> - -#include <linux/serial_core.h> -#include <linux/kernel.h> - -#include "cpm_uart.h" - -/**************************************************************/ - -void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) -{ - cpm_command(port->command, cmd); -} - -void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, - struct device_node *np) -{ - void __iomem *pram; - unsigned long offset; - struct resource res; - resource_size_t len; - - /* Don't remap parameter RAM if it has already been initialized - * during console setup. - */ - if (IS_SMC(port) && port->smcup) - return port->smcup; - else if (!IS_SMC(port) && port->sccup) - return port->sccup; - - if (of_address_to_resource(np, 1, &res)) - return NULL; - - len = resource_size(&res); - pram = ioremap(res.start, len); - if (!pram) - return NULL; - - if (!IS_SMC(port)) - return pram; - - if (len != 2) { - printk(KERN_WARNING "cpm_uart[%d]: device tree references " - "SMC pram, using boot loader/wrapper pram mapping. " - "Please fix your device tree to reference the pram " - "base register instead.\n", - port->port.line); - return pram; - } - - offset = cpm_dpalloc(PROFF_SMC_SIZE, 64); - out_be16(pram, offset); - iounmap(pram); - return cpm_muram_addr(offset); -} - -void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) -{ - if (!IS_SMC(port)) - iounmap(pram); -} - -/* - * Allocate DP-Ram and memory buffers. We need to allocate a transmit and - * receive buffer descriptors from dual port ram, and a character - * buffer area from host mem. If we are allocating for the console we need - * to do it from bootmem - */ -int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) -{ - int dpmemsz, memsz; - u8 __iomem *dp_mem; - unsigned long dp_offset; - u8 *mem_addr; - dma_addr_t dma_addr = 0; - - pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line); - - dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos); - dp_offset = cpm_dpalloc(dpmemsz, 8); - if (IS_ERR_VALUE(dp_offset)) { - printk(KERN_ERR - "cpm_uart_cpm.c: could not allocate buffer descriptors\n"); - return -ENOMEM; - } - - dp_mem = cpm_dpram_addr(dp_offset); - - memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + - L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); - if (is_con) { - mem_addr = kzalloc(memsz, GFP_NOWAIT); - dma_addr = virt_to_bus(mem_addr); - } - else - mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr, - GFP_KERNEL); - - if (mem_addr == NULL) { - cpm_dpfree(dp_offset); - printk(KERN_ERR - "cpm_uart_cpm.c: could not allocate coherent memory\n"); - return -ENOMEM; - } - - pinfo->dp_addr = dp_offset; - pinfo->mem_addr = mem_addr; - pinfo->dma_addr = dma_addr; - pinfo->mem_size = memsz; - - pinfo->rx_buf = mem_addr; - pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos - * pinfo->rx_fifosize); - - pinfo->rx_bd_base = (cbd_t __iomem *)dp_mem; - pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; - - return 0; -} - -void cpm_uart_freebuf(struct uart_cpm_port *pinfo) -{ - dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos * - pinfo->rx_fifosize) + - L1_CACHE_ALIGN(pinfo->tx_nrfifos * - pinfo->tx_fifosize), (void __force *)pinfo->mem_addr, - pinfo->dma_addr); - - cpm_dpfree(pinfo->dp_addr); -} diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h deleted file mode 100644 index 051a8509c3e5..000000000000 --- a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Driver for CPM (SCC/SMC) serial ports - * - * definitions for cpm2 - * - */ - -#ifndef CPM_UART_CPM2_H -#define CPM_UART_CPM2_H - -#include <asm/cpm2.h> - -static inline void cpm_set_brg(int brg, int baud) -{ - cpm_setbrg(brg, baud); -} - -static inline void cpm_set_scc_fcr(scc_uart_t __iomem *sup) -{ - out_8(&sup->scc_genscc.scc_rfcr, CPMFCR_GBL | CPMFCR_EB); - out_8(&sup->scc_genscc.scc_tfcr, CPMFCR_GBL | CPMFCR_EB); -} - -static inline void cpm_set_smc_fcr(smc_uart_t __iomem *up) -{ - out_8(&up->smc_rfcr, CPMFCR_GBL | CPMFCR_EB); - out_8(&up->smc_tfcr, CPMFCR_GBL | CPMFCR_EB); -} - -#define DPRAM_BASE ((u8 __iomem __force *)cpm_dpram_addr(0)) - -#endif |