summaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/spi-altera-dfl.c21
-rw-r--r--drivers/spi/spi-atmel.c9
-rw-r--r--drivers/spi/spi-bcm2835.c12
-rw-r--r--drivers/spi/spi-cadence-quadspi.c51
-rw-r--r--drivers/spi/spi-cadence.c14
-rw-r--r--drivers/spi/spi-coldfire-qspi.c2
-rw-r--r--drivers/spi/spi-davinci.c8
-rw-r--r--drivers/spi/spi-imx.c59
-rw-r--r--drivers/spi/spi-meson-spicc.c2
-rw-r--r--drivers/spi/spi-mt65xx.c29
-rw-r--r--drivers/spi/spi-mux.c8
-rw-r--r--drivers/spi/spi-orion.c22
-rw-r--r--drivers/spi/spi-tegra20-slink.c6
-rw-r--r--drivers/spi/spi.c8
-rw-r--r--drivers/spi/spidev.c1
15 files changed, 166 insertions, 86 deletions
diff --git a/drivers/spi/spi-altera-dfl.c b/drivers/spi/spi-altera-dfl.c
index 39a3e1a032e0..44fc9ee13fc7 100644
--- a/drivers/spi/spi-altera-dfl.c
+++ b/drivers/spi/spi-altera-dfl.c
@@ -104,13 +104,6 @@ static const struct regmap_config indirect_regbus_cfg = {
.reg_read = indirect_bus_reg_read,
};
-static struct spi_board_info m10_bmc_info = {
- .modalias = "m10-d5005",
- .max_speed_hz = 12500000,
- .bus_num = 0,
- .chip_select = 0,
-};
-
static void config_spi_master(void __iomem *base, struct spi_master *master)
{
u64 v;
@@ -130,6 +123,7 @@ static void config_spi_master(void __iomem *base, struct spi_master *master)
static int dfl_spi_altera_probe(struct dfl_device *dfl_dev)
{
+ struct spi_board_info board_info = { 0 };
struct device *dev = &dfl_dev->dev;
struct spi_master *master;
struct altera_spi *hw;
@@ -170,9 +164,18 @@ static int dfl_spi_altera_probe(struct dfl_device *dfl_dev)
goto exit;
}
- if (!spi_new_device(master, &m10_bmc_info)) {
+ if (dfl_dev->revision == FME_FEATURE_REV_MAX10_SPI_N5010)
+ strscpy(board_info.modalias, "m10-n5010", SPI_NAME_SIZE);
+ else
+ strscpy(board_info.modalias, "m10-d5005", SPI_NAME_SIZE);
+
+ board_info.max_speed_hz = 12500000;
+ board_info.bus_num = 0;
+ board_info.chip_select = 0;
+
+ if (!spi_new_device(master, &board_info)) {
dev_err(dev, "%s failed to create SPI device: %s\n",
- __func__, m10_bmc_info.modalias);
+ __func__, board_info.modalias);
}
return 0;
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 2ef74885ffa2..788dcdf25f00 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -352,8 +352,6 @@ static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
}
mr = spi_readl(as, MR);
- if (spi->cs_gpiod)
- gpiod_set_value(spi->cs_gpiod, 1);
} else {
u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0;
int i;
@@ -369,8 +367,6 @@ static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
mr = spi_readl(as, MR);
mr = SPI_BFINS(PCS, ~(1 << chip_select), mr);
- if (spi->cs_gpiod)
- gpiod_set_value(spi->cs_gpiod, 1);
spi_writel(as, MR, mr);
}
@@ -400,8 +396,6 @@ static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
if (!spi->cs_gpiod)
spi_writel(as, CR, SPI_BIT(LASTXFER));
- else
- gpiod_set_value(spi->cs_gpiod, 0);
}
static void atmel_spi_lock(struct atmel_spi *as) __acquires(&as->lock)
@@ -1483,7 +1477,8 @@ static int atmel_spi_probe(struct platform_device *pdev)
master->bus_num = pdev->id;
master->num_chipselect = 4;
master->setup = atmel_spi_setup;
- master->flags = (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX);
+ master->flags = (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX |
+ SPI_MASTER_GPIO_SS);
master->transfer_one = atmel_spi_one_transfer;
master->set_cs = atmel_spi_set_cs;
master->cleanup = atmel_spi_cleanup;
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index 5f8771fe1a31..775c0bf2f923 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -83,6 +83,7 @@ MODULE_PARM_DESC(polling_limit_us,
* struct bcm2835_spi - BCM2835 SPI controller
* @regs: base address of register map
* @clk: core clock, divided to calculate serial clock
+ * @clk_hz: core clock cached speed
* @irq: interrupt, signals TX FIFO empty or RX FIFO ¾ full
* @tfr: SPI transfer currently processed
* @ctlr: SPI controller reverse lookup
@@ -116,6 +117,7 @@ MODULE_PARM_DESC(polling_limit_us,
struct bcm2835_spi {
void __iomem *regs;
struct clk *clk;
+ unsigned long clk_hz;
int irq;
struct spi_transfer *tfr;
struct spi_controller *ctlr;
@@ -1045,19 +1047,18 @@ static int bcm2835_spi_transfer_one(struct spi_controller *ctlr,
{
struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
struct bcm2835_spidev *slv = spi_get_ctldata(spi);
- unsigned long spi_hz, clk_hz, cdiv;
+ unsigned long spi_hz, cdiv;
unsigned long hz_per_byte, byte_limit;
u32 cs = slv->prepare_cs;
/* set clock */
spi_hz = tfr->speed_hz;
- clk_hz = clk_get_rate(bs->clk);
- if (spi_hz >= clk_hz / 2) {
+ if (spi_hz >= bs->clk_hz / 2) {
cdiv = 2; /* clk_hz/2 is the fastest we can go */
} else if (spi_hz) {
/* CDIV must be a multiple of two */
- cdiv = DIV_ROUND_UP(clk_hz, spi_hz);
+ cdiv = DIV_ROUND_UP(bs->clk_hz, spi_hz);
cdiv += (cdiv % 2);
if (cdiv >= 65536)
@@ -1065,7 +1066,7 @@ static int bcm2835_spi_transfer_one(struct spi_controller *ctlr,
} else {
cdiv = 0; /* 0 is the slowest we can go */
}
- tfr->effective_speed_hz = cdiv ? (clk_hz / cdiv) : (clk_hz / 65536);
+ tfr->effective_speed_hz = cdiv ? (bs->clk_hz / cdiv) : (bs->clk_hz / 65536);
bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv);
/* handle all the 3-wire mode */
@@ -1354,6 +1355,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
return bs->irq ? bs->irq : -ENODEV;
clk_prepare_enable(bs->clk);
+ bs->clk_hz = clk_get_rate(bs->clk);
err = bcm2835_dma_init(ctlr, &pdev->dev, bs);
if (err)
diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index 7a00346ff9b9..101cc71bffa7 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -309,6 +309,9 @@ static unsigned int cqspi_calc_dummy(const struct spi_mem_op *op, bool dtr)
{
unsigned int dummy_clk;
+ if (!op->dummy.nbytes)
+ return 0;
+
dummy_clk = op->dummy.nbytes * (8 / op->dummy.buswidth);
if (dtr)
dummy_clk /= 2;
@@ -322,7 +325,15 @@ static int cqspi_set_protocol(struct cqspi_flash_pdata *f_pdata,
f_pdata->inst_width = CQSPI_INST_TYPE_SINGLE;
f_pdata->addr_width = CQSPI_INST_TYPE_SINGLE;
f_pdata->data_width = CQSPI_INST_TYPE_SINGLE;
- f_pdata->dtr = op->data.dtr && op->cmd.dtr && op->addr.dtr;
+
+ /*
+ * For an op to be DTR, cmd phase along with every other non-empty
+ * phase should have dtr field set to 1. If an op phase has zero
+ * nbytes, ignore its dtr field; otherwise, check its dtr field.
+ */
+ f_pdata->dtr = op->cmd.dtr &&
+ (!op->addr.nbytes || op->addr.dtr) &&
+ (!op->data.nbytes || op->data.dtr);
switch (op->data.buswidth) {
case 0:
@@ -797,19 +808,20 @@ static int cqspi_write_setup(struct cqspi_flash_pdata *f_pdata,
reg = cqspi_calc_rdreg(f_pdata);
writel(reg, reg_base + CQSPI_REG_RD_INSTR);
- if (f_pdata->dtr) {
- /*
- * Some flashes like the cypress Semper flash expect a 4-byte
- * dummy address with the Read SR command in DTR mode, but this
- * controller does not support sending address with the Read SR
- * command. So, disable write completion polling on the
- * controller's side. spi-nor will take care of polling the
- * status register.
- */
- reg = readl(reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
- reg |= CQSPI_REG_WR_DISABLE_AUTO_POLL;
- writel(reg, reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
- }
+ /*
+ * SPI NAND flashes require the address of the status register to be
+ * passed in the Read SR command. Also, some SPI NOR flashes like the
+ * cypress Semper flash expect a 4-byte dummy address in the Read SR
+ * command in DTR mode.
+ *
+ * But this controller does not support address phase in the Read SR
+ * command when doing auto-HW polling. So, disable write completion
+ * polling on the controller's side. spinand and spi-nor will take
+ * care of polling the status register.
+ */
+ reg = readl(reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
+ reg |= CQSPI_REG_WR_DISABLE_AUTO_POLL;
+ writel(reg, reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
reg = readl(reg_base + CQSPI_REG_SIZE);
reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
@@ -1224,8 +1236,15 @@ static bool cqspi_supports_mem_op(struct spi_mem *mem,
{
bool all_true, all_false;
- all_true = op->cmd.dtr && op->addr.dtr && op->dummy.dtr &&
- op->data.dtr;
+ /*
+ * op->dummy.dtr is required for converting nbytes into ncycles.
+ * Also, don't check the dtr field of the op phase having zero nbytes.
+ */
+ all_true = op->cmd.dtr &&
+ (!op->addr.nbytes || op->addr.dtr) &&
+ (!op->dummy.nbytes || op->dummy.dtr) &&
+ (!op->data.nbytes || op->data.dtr);
+
all_false = !op->cmd.dtr && !op->addr.dtr && !op->dummy.dtr &&
!op->data.dtr;
diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c
index a3afd1b9ac56..ceb16e70d235 100644
--- a/drivers/spi/spi-cadence.c
+++ b/drivers/spi/spi-cadence.c
@@ -517,6 +517,12 @@ static int cdns_spi_probe(struct platform_device *pdev)
goto clk_dis_apb;
}
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
+ pm_runtime_get_noresume(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
ret = of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs);
if (ret < 0)
master->num_chipselect = CDNS_SPI_DEFAULT_NUM_CS;
@@ -531,11 +537,6 @@ static int cdns_spi_probe(struct platform_device *pdev)
/* SPI controller initializations */
cdns_spi_init_hw(xspi);
- pm_runtime_set_active(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
- pm_runtime_use_autosuspend(&pdev->dev);
- pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
-
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
ret = -ENXIO;
@@ -566,6 +567,9 @@ static int cdns_spi_probe(struct platform_device *pdev)
master->bits_per_word_mask = SPI_BPW_MASK(8);
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
ret = spi_register_master(master);
if (ret) {
dev_err(&pdev->dev, "spi_register_master failed\n");
diff --git a/drivers/spi/spi-coldfire-qspi.c b/drivers/spi/spi-coldfire-qspi.c
index 8996115ce736..263ce9047327 100644
--- a/drivers/spi/spi-coldfire-qspi.c
+++ b/drivers/spi/spi-coldfire-qspi.c
@@ -444,7 +444,7 @@ static int mcfqspi_remove(struct platform_device *pdev)
mcfqspi_wr_qmr(mcfqspi, MCFQSPI_QMR_MSTR);
mcfqspi_cs_teardown(mcfqspi);
- clk_disable(mcfqspi->clk);
+ clk_disable_unprepare(mcfqspi->clk);
return 0;
}
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index e114e6fe5ea5..d112c2cac042 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -213,12 +213,6 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
* line for the controller
*/
if (spi->cs_gpiod) {
- /*
- * FIXME: is this code ever executed? This host does not
- * set SPI_MASTER_GPIO_SS so this chipselect callback should
- * not get called from the SPI core when we are using
- * GPIOs for chip select.
- */
if (value == BITBANG_CS_ACTIVE)
gpiod_set_value(spi->cs_gpiod, 1);
else
@@ -945,7 +939,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
master->bus_num = pdev->id;
master->num_chipselect = pdata->num_chipselect;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16);
- master->flags = SPI_MASTER_MUST_RX;
+ master->flags = SPI_MASTER_MUST_RX | SPI_MASTER_GPIO_SS;
master->setup = davinci_spi_setup;
master->cleanup = davinci_spi_cleanup;
master->can_dma = davinci_spi_can_dma;
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 340fd1245bc2..b2dd0a4d2446 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -77,6 +77,11 @@ struct spi_imx_devtype_data {
bool has_slavemode;
unsigned int fifo_size;
bool dynamic_burst;
+ /*
+ * ERR009165 fixed or not:
+ * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+ */
+ bool tx_glitch_fixed;
enum spi_imx_devtype devtype;
};
@@ -505,7 +510,9 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx,
struct spi_message *msg)
{
struct spi_device *spi = msg->spi;
+ struct spi_transfer *xfer;
u32 ctrl = MX51_ECSPI_CTRL_ENABLE;
+ u32 min_speed_hz = ~0U;
u32 testreg, delay;
u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG);
@@ -577,9 +584,21 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx,
* be asserted before the SCLK polarity changes, which would disrupt
* the SPI communication as the device on the other end would consider
* the change of SCLK polarity as a clock tick already.
+ *
+ * Because spi_imx->spi_bus_clk is only set in bitbang prepare_message
+ * callback, iterate over all the transfers in spi_message, find the
+ * one with lowest bus frequency, and use that bus frequency for the
+ * delay calculation. In case all transfers have speed_hz == 0, then
+ * min_speed_hz is ~0 and the resulting delay is zero.
*/
- delay = (2 * 1000000) / spi_imx->spi_bus_clk;
- if (likely(delay < 10)) /* SCLK is faster than 100 kHz */
+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ if (!xfer->speed_hz)
+ continue;
+ min_speed_hz = min(xfer->speed_hz, min_speed_hz);
+ }
+
+ delay = (2 * 1000000) / min_speed_hz;
+ if (likely(delay < 10)) /* SCLK is faster than 200 kHz */
udelay(delay);
else /* SCLK is _very_ slow */
usleep_range(delay, delay + 10);
@@ -608,8 +627,14 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
ctrl |= mx51_ecspi_clkdiv(spi_imx, spi_imx->spi_bus_clk, &clk);
spi_imx->spi_bus_clk = clk;
- if (spi_imx->usedma)
+ /*
+ * ERR009165: work in XHC mode instead of SMC as PIO on the chips
+ * before i.mx6ul.
+ */
+ if (spi_imx->usedma && spi_imx->devtype_data->tx_glitch_fixed)
ctrl |= MX51_ECSPI_CTRL_SMC;
+ else
+ ctrl &= ~MX51_ECSPI_CTRL_SMC;
writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
@@ -618,12 +643,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
static void mx51_setup_wml(struct spi_imx_data *spi_imx)
{
+ u32 tx_wml = 0;
+
+ if (spi_imx->devtype_data->tx_glitch_fixed)
+ tx_wml = spi_imx->wml;
/*
* Configure the DMA register: setup the watermark
* and enable DMA request.
*/
writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
- MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
+ MX51_ECSPI_DMA_TX_WML(tx_wml) |
MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
@@ -1014,6 +1043,23 @@ static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
.devtype = IMX53_ECSPI,
};
+static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = {
+ .intctrl = mx51_ecspi_intctrl,
+ .prepare_message = mx51_ecspi_prepare_message,
+ .prepare_transfer = mx51_ecspi_prepare_transfer,
+ .trigger = mx51_ecspi_trigger,
+ .rx_available = mx51_ecspi_rx_available,
+ .reset = mx51_ecspi_reset,
+ .setup_wml = mx51_setup_wml,
+ .fifo_size = 64,
+ .has_dmamode = true,
+ .dynamic_burst = true,
+ .has_slavemode = true,
+ .tx_glitch_fixed = true,
+ .disable = mx51_ecspi_disable,
+ .devtype = IMX51_ECSPI,
+};
+
static const struct of_device_id spi_imx_dt_ids[] = {
{ .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, },
{ .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, },
@@ -1022,6 +1068,7 @@ static const struct of_device_id spi_imx_dt_ids[] = {
{ .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
{ .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
{ .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
+ { .compatible = "fsl,imx6ul-ecspi", .data = &imx6ul_ecspi_devtype_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
@@ -1235,10 +1282,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
{
int ret;
- /* use pio mode for i.mx6dl chip TKT238285 */
- if (of_machine_is_compatible("fsl,imx6dl"))
- return 0;
-
spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
/* Prepare for TX DMA: */
diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c
index b2c4621db34d..c208efeadd18 100644
--- a/drivers/spi/spi-meson-spicc.c
+++ b/drivers/spi/spi-meson-spicc.c
@@ -785,6 +785,8 @@ static int meson_spicc_remove(struct platform_device *pdev)
clk_disable_unprepare(spicc->core);
clk_disable_unprepare(spicc->pclk);
+ spi_master_put(spicc->master);
+
return 0;
}
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 6cf1b8bb6feb..386e8c84be0a 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -509,14 +509,15 @@ static int mtk_spi_fifo_transfer(struct spi_master *master,
mtk_spi_prepare_transfer(master, xfer);
mtk_spi_setup_packet(master);
- cnt = xfer->len / 4;
- iowrite32_rep(mdata->base + SPI_TX_DATA_REG, xfer->tx_buf, cnt);
-
- remainder = xfer->len % 4;
- if (remainder > 0) {
- reg_val = 0;
- memcpy(&reg_val, xfer->tx_buf + (cnt * 4), remainder);
- writel(reg_val, mdata->base + SPI_TX_DATA_REG);
+ if (xfer->tx_buf) {
+ cnt = xfer->len / 4;
+ iowrite32_rep(mdata->base + SPI_TX_DATA_REG, xfer->tx_buf, cnt);
+ remainder = xfer->len % 4;
+ if (remainder > 0) {
+ reg_val = 0;
+ memcpy(&reg_val, xfer->tx_buf + (cnt * 4), remainder);
+ writel(reg_val, mdata->base + SPI_TX_DATA_REG);
+ }
}
mtk_spi_enable_transfer(master);
@@ -835,12 +836,6 @@ static int mtk_spi_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
- ret = devm_spi_register_master(&pdev->dev, master);
- if (ret) {
- dev_err(&pdev->dev, "failed to register master (%d)\n", ret);
- goto err_disable_runtime_pm;
- }
-
if (mdata->dev_comp->need_pad_sel) {
if (mdata->pad_num != master->num_chipselect) {
dev_err(&pdev->dev,
@@ -880,6 +875,12 @@ static int mtk_spi_probe(struct platform_device *pdev)
dev_notice(&pdev->dev, "SPI dma_set_mask(%d) failed, ret:%d\n",
addr_bits, ret);
+ ret = devm_spi_register_master(&pdev->dev, master);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register master (%d)\n", ret);
+ goto err_disable_runtime_pm;
+ }
+
return 0;
err_disable_runtime_pm:
diff --git a/drivers/spi/spi-mux.c b/drivers/spi/spi-mux.c
index 37dfc6e82804..9708b7827ff7 100644
--- a/drivers/spi/spi-mux.c
+++ b/drivers/spi/spi-mux.c
@@ -167,10 +167,17 @@ err_put_ctlr:
return ret;
}
+static const struct spi_device_id spi_mux_id[] = {
+ { "spi-mux" },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, spi_mux_id);
+
static const struct of_device_id spi_mux_of_match[] = {
{ .compatible = "spi-mux" },
{ }
};
+MODULE_DEVICE_TABLE(of, spi_mux_of_match);
static struct spi_driver spi_mux_driver = {
.probe = spi_mux_probe,
@@ -178,6 +185,7 @@ static struct spi_driver spi_mux_driver = {
.name = "spi-mux",
.of_match_table = spi_mux_of_match,
},
+ .id_table = spi_mux_id,
};
module_spi_driver(spi_mux_driver);
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index 34b31aba3981..e8de3cbbfb2a 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -328,8 +328,16 @@ orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
static void orion_spi_set_cs(struct spi_device *spi, bool enable)
{
struct orion_spi *orion_spi;
+ void __iomem *ctrl_reg;
+ u32 val;
orion_spi = spi_master_get_devdata(spi->master);
+ ctrl_reg = spi_reg(orion_spi, ORION_SPI_IF_CTRL_REG);
+
+ val = readl(ctrl_reg);
+
+ /* Clear existing chip-select and assertion state */
+ val &= ~(ORION_SPI_CS_MASK | 0x1);
/*
* If this line is using a GPIO to control chip select, this internal
@@ -338,9 +346,7 @@ static void orion_spi_set_cs(struct spi_device *spi, bool enable)
* as it is handled by a GPIO, but that doesn't matter. What we need
* is to deassert the old chip select and assert some other chip select.
*/
- orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, ORION_SPI_CS_MASK);
- orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG,
- ORION_SPI_CS(spi->chip_select));
+ val |= ORION_SPI_CS(spi->chip_select);
/*
* Chip select logic is inverted from spi_set_cs(). For lines using a
@@ -350,9 +356,13 @@ static void orion_spi_set_cs(struct spi_device *spi, bool enable)
* doesn't matter.
*/
if (!enable)
- orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
- else
- orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
+ val |= 0x1;
+
+ /*
+ * To avoid toggling unwanted chip selects update the register
+ * with a single write.
+ */
+ writel(val, ctrl_reg);
}
static inline int orion_spi_wait_till_ready(struct orion_spi *orion_spi)
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 8ce840c7ecc8..3226c4e1c7c0 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -1182,8 +1182,7 @@ static int tegra_slink_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM
-static int tegra_slink_runtime_suspend(struct device *dev)
+static int __maybe_unused tegra_slink_runtime_suspend(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
struct tegra_slink_data *tspi = spi_master_get_devdata(master);
@@ -1195,7 +1194,7 @@ static int tegra_slink_runtime_suspend(struct device *dev)
return 0;
}
-static int tegra_slink_runtime_resume(struct device *dev)
+static int __maybe_unused tegra_slink_runtime_resume(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
struct tegra_slink_data *tspi = spi_master_get_devdata(master);
@@ -1208,7 +1207,6 @@ static int tegra_slink_runtime_resume(struct device *dev)
}
return 0;
}
-#endif /* CONFIG_PM */
static const struct dev_pm_ops slink_pm_ops = {
SET_RUNTIME_PM_OPS(tegra_slink_runtime_suspend,
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 5d68e6cd2a18..57e2499ec1ed 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -58,6 +58,10 @@ modalias_show(struct device *dev, struct device_attribute *a, char *buf)
const struct spi_device *spi = to_spi_device(dev);
int len;
+ len = of_device_modalias(dev, buf, PAGE_SIZE);
+ if (len != -ENODEV)
+ return len;
+
len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
if (len != -ENODEV)
return len;
@@ -405,7 +409,7 @@ static int spi_probe(struct device *dev)
return ret;
}
-static int spi_remove(struct device *dev)
+static void spi_remove(struct device *dev)
{
const struct spi_driver *sdrv = to_spi_driver(dev->driver);
@@ -420,8 +424,6 @@ static int spi_remove(struct device *dev)
}
dev_pm_domain_detach(dev, true);
-
- return 0;
}
static void spi_shutdown(struct device *dev)
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 24e9469ea35b..6dc29ce3b4bf 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -677,7 +677,6 @@ static struct class *spidev_class;
static const struct of_device_id spidev_dt_ids[] = {
{ .compatible = "rohm,dh2228fv" },
{ .compatible = "lineartechnology,ltc2488" },
- { .compatible = "ge,achc" },
{ .compatible = "semtech,sx1301" },
{ .compatible = "lwn,bk4" },
{ .compatible = "dh,dhcom-board" },
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-17 10:45:37 +0300