diff options
Diffstat (limited to 'drivers/spi/Kconfig')
| -rw-r--r-- | drivers/spi/Kconfig | 86 |
1 files changed, 83 insertions, 3 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index f51f9466e518..891729c9c564 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -55,6 +55,9 @@ config SPI_MEM This extension is meant to simplify interaction with SPI memories by providing a high-level interface to send memory-like commands. +config SPI_OFFLOAD + bool + comment "SPI Master Controller Drivers" config SPI_AIROHA_SNFI @@ -96,6 +99,15 @@ config SPI_AMLOGIC_SPIFC_A1 This enables master mode support for the SPIFC (SPI flash controller) available in Amlogic A1 (A113L SoC). +config SPI_AMLOGIC_SPISG + tristate "Amlogic SPISG controller" + depends on COMMON_CLK + depends on ARCH_MESON || COMPILE_TEST + help + This enables master mode support for the SPISG (SPI scatter-gather + communication controller), which is available on platforms such as + Amlogic A4 SoCs. + config SPI_APPLE tristate "Apple SoC SPI Controller platform driver" depends on ARCH_APPLE || COMPILE_TEST @@ -176,6 +188,7 @@ config SPI_AU1550 config SPI_AXI_SPI_ENGINE tristate "Analog Devices AXI SPI Engine controller" depends on HAS_IOMEM + select SPI_OFFLOAD help This enables support for the Analog Devices AXI SPI Engine SPI controller. It is part of the SPI Engine framework that is used in some Analog Devices @@ -542,6 +555,18 @@ config SPI_JCORE This enables support for the SPI master controller in the J-Core synthesizable, open source SoC. +config SPI_KSPI2 + tristate "Support for KEBA SPI master type 2 hardware" + depends on HAS_IOMEM + depends on KEBA_CP500 || COMPILE_TEST + select AUXILIARY_BUS + help + This driver supports KEBA SPI master type 2 FPGA implementation, + as found on CP500 devices for example. + + This driver can also be built as a module. If so, the module + will be called spi-kspi2. + config SPI_LM70_LLP tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)" depends on PARPORT @@ -631,10 +656,10 @@ config SPI_FSL_SPI config SPI_FSL_DSPI tristate "Freescale DSPI controller" select REGMAP_MMIO - depends on SOC_VF610 || SOC_LS1021A || ARCH_LAYERSCAPE || M5441x || COMPILE_TEST + depends on ARCH_MXC || ARCH_NXP || M5441x || COMPILE_TEST help This enables support for the Freescale DSPI controller in master - mode. VF610, LS1021A and ColdFire platforms uses the controller. + mode. S32, VF610, LS1021A and ColdFire platforms uses the controller. config SPI_FSL_ESPI tristate "Freescale eSPI controller" @@ -907,6 +932,14 @@ config SPI_RSPI help SPI driver for Renesas RSPI and QSPI blocks. +config SPI_RZV2H_RSPI + tristate "Renesas RZ/V2H RSPI controller" + depends on ARCH_RENESAS || COMPILE_TEST + help + RSPI driver for the Renesas RZ/V2H Serial Peripheral Interface (RSPI). + RSPI supports both SPI host and SPI target roles. This option only + enables the SPI host role. + config SPI_RZV2M_CSI tristate "Renesas RZ/V2M CSI controller" depends on ARCH_RENESAS || COMPILE_TEST @@ -920,6 +953,15 @@ config SPI_QCOM_QSPI help QSPI(Quad SPI) driver for Qualcomm QSPI controller. +config SPI_QPIC_SNAND + tristate "QPIC SNAND controller" + depends on ARCH_QCOM || COMPILE_TEST + depends on MTD + help + QPIC_SNAND (QPIC SPI NAND) driver for Qualcomm QPIC controller. + QPIC controller supports both parallel nand and serial nand. + This config will enable serial nand driver for QPIC controller. + config SPI_QUP tristate "Qualcomm SPI controller with QUP interface" depends on ARCH_QCOM || COMPILE_TEST @@ -1009,6 +1051,15 @@ config SPI_SN_F_OSPI for connecting an SPI Flash memory over up to 8-bit wide bus. It supports indirect access mode only. +config SPI_SG2044_NOR + tristate "SG2044 SPI NOR Controller" + depends on ARCH_SOPHGO || COMPILE_TEST + help + This enables support for the SG2044 SPI NOR controller, + which supports Dual/Quad read and write operations while + also supporting 3Byte address devices and 4Byte address + devices. + config SPI_SPRD tristate "Spreadtrum SPI controller" depends on ARCH_SPRD || COMPILE_TEST @@ -1033,6 +1084,16 @@ config SPI_STM32 is not available, the driver automatically falls back to PIO mode. +config SPI_STM32_OSPI + tristate "STMicroelectronics STM32 OCTO SPI controller" + depends on ARCH_STM32 || COMPILE_TEST + depends on OF + depends on SPI_MEM + help + This enables support for the Octo SPI controller in master mode. + This driver does not support generic SPI. The implementation only + supports spi-mem interface. + config SPI_STM32_QSPI tristate "STMicroelectronics STM32 QUAD SPI controller" depends on ARCH_STM32 || COMPILE_TEST @@ -1222,7 +1283,9 @@ config SPI_ZYNQMP_GQSPI config SPI_AMD tristate "AMD SPI controller" - depends on SPI_MASTER || COMPILE_TEST + depends on PCI + depends on SPI_MASTER || X86 || COMPILE_TEST + depends on SPI_MEM help Enables SPI controller driver for AMD SoC. @@ -1305,4 +1368,21 @@ endif # SPI_SLAVE config SPI_DYNAMIC def_bool ACPI || OF_DYNAMIC || SPI_SLAVE +if SPI_OFFLOAD + +comment "SPI Offload triggers" + +config SPI_OFFLOAD_TRIGGER_ADI_UTIL_SD + tristate "SPI offload trigger using ADI sigma-delta utility" + help + SPI offload trigger from ADI sigma-delta utility FPGA IP block. + +config SPI_OFFLOAD_TRIGGER_PWM + tristate "SPI offload trigger using PWM" + depends on PWM + help + Generic SPI offload trigger implemented using PWM output. + +endif # SPI_OFFLOAD + endif # SPI |