diff options
Diffstat (limited to 'drivers/scsi/Kconfig')
| -rw-r--r-- | drivers/scsi/Kconfig | 114 |
1 files changed, 2 insertions, 112 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 8a739b74cfb7..11e89e56b865 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -640,88 +640,6 @@ config SCSI_DMX3191D To compile this driver as a module, choose M here: the module will be called dmx3191d. -config SCSI_EATA - tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support" - depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API - ---help--- - This driver supports all EATA/DMA-compliant SCSI host adapters. DPT - ISA and all EISA I/O addresses are probed looking for the "EATA" - signature. The addresses of all the PCI SCSI controllers reported - by the PCI subsystem are probed as well. - - You want to read the start of <file:drivers/scsi/eata.c> and the - SCSI-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here: the - module will be called eata. - -config SCSI_EATA_TAGGED_QUEUE - bool "enable tagged command queueing" - depends on SCSI_EATA - help - This is a feature of SCSI-2 which improves performance: the host - adapter can send several SCSI commands to a device's queue even if - previous commands haven't finished yet. - This is equivalent to the "eata=tc:y" boot option. - -config SCSI_EATA_LINKED_COMMANDS - bool "enable elevator sorting" - depends on SCSI_EATA - help - This option enables elevator sorting for all probed SCSI disks and - CD-ROMs. It definitely reduces the average seek distance when doing - random seeks, but this does not necessarily result in a noticeable - performance improvement: your mileage may vary... - This is equivalent to the "eata=lc:y" boot option. - -config SCSI_EATA_MAX_TAGS - int "maximum number of queued commands" - depends on SCSI_EATA - default "16" - help - This specifies how many SCSI commands can be maximally queued for - each probed SCSI device. You should reduce the default value of 16 - only if you have disks with buggy or limited tagged command support. - Minimum is 2 and maximum is 62. This value is also the window size - used by the elevator sorting option above. The effective value used - by the driver for each probed SCSI device is reported at boot time. - This is equivalent to the "eata=mq:8" boot option. - -config SCSI_EATA_PIO - tristate "EATA-PIO (old DPT PM2001, PM2012A) support" - depends on (ISA || EISA || PCI) && SCSI && BROKEN - ---help--- - This driver supports all EATA-PIO protocol compliant SCSI Host - Adapters like the DPT PM2001 and the PM2012A. EATA-DMA compliant - host adapters could also use this driver but are discouraged from - doing so, since this driver only supports hard disks and lacks - numerous features. You might want to have a look at the SCSI-HOWTO, - available from <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here: the - module will be called eata_pio. - -config SCSI_FUTURE_DOMAIN - tristate "Future Domain 16xx SCSI/AHA-2920A support" - depends on (ISA || PCI) && SCSI - select CHECK_SIGNATURE - ---help--- - This is support for Future Domain's 16-bit SCSI host adapters - (TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and - other adapters based on the Future Domain chipsets (Quantum - ISA-200S, ISA-250MG; Adaptec AHA-2920A; and at least one IBM board). - It is explained in section 3.7 of the SCSI-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip - and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI - controller support"). This Future Domain driver works with the older - Adaptec AHA-2920A boards with a Future Domain chip on them. - - To compile this driver as a module, choose M here: the - module will be called fdomain. - config SCSI_GDTH tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support" depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API @@ -923,18 +841,6 @@ config SCSI_IZIP_SLOW_CTR Generally, saying N is fine. -config SCSI_NCR53C406A - tristate "NCR53c406a SCSI support" - depends on ISA && SCSI - help - This is support for the NCR53c406a SCSI host adapter. For user - configurable parameters, check out <file:drivers/scsi/NCR53c406a.c> - in the kernel source. Also read the SCSI-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here: the - module will be called NCR53c406. - config SCSI_NCR_D700 tristate "NCR Dual 700 MCA SCSI support" depends on MCA && SCSI @@ -1059,6 +965,7 @@ config SCSI_IPR depends on PCI && SCSI && ATA select FW_LOADER select IRQ_POLL + select SGL_ALLOC ---help--- This driver supports the IBM Power Linux family RAID adapters. This includes IBM pSeries 5712, 5703, 5709, and 570A, as well @@ -1265,24 +1172,6 @@ config SCSI_SIM710 It currently supports Compaq EISA cards and NCR MCA cards -config SCSI_SYM53C416 - tristate "Symbios 53c416 SCSI support" - depends on ISA && SCSI - ---help--- - This is support for the sym53c416 SCSI host adapter, the SCSI - adapter that comes with some HP scanners. This driver requires that - the sym53c416 is configured first using some sort of PnP - configuration program (e.g. isapnp) or by a PnP aware BIOS. If you - are using isapnp then you need to compile this driver as a module - and then load it using insmod after isapnp has run. The parameters - of the configured card(s) should be passed to the driver. The format - is: - - insmod sym53c416 sym53c416=<base>,<irq> [sym53c416_1=<base>,<irq>] - - To compile this driver as a module, choose M here: the - module will be called sym53c416. - config SCSI_DC395x tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support" depends on PCI && SCSI @@ -1576,6 +1465,7 @@ config ZFCP config SCSI_PMCRAID tristate "PMC SIERRA Linux MaxRAID adapter support" depends on PCI && SCSI && NET + select SGL_ALLOC ---help--- This driver supports the PMC SIERRA MaxRAID adapters. |