diff options
Diffstat (limited to 'drivers/pnp/quirks.c')
| -rw-r--r-- | drivers/pnp/quirks.c | 107 |
1 files changed, 91 insertions, 16 deletions
diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c index 277df50c89ae..7c3236690cc3 100644 --- a/drivers/pnp/quirks.c +++ b/drivers/pnp/quirks.c @@ -107,31 +107,106 @@ static void quirk_sb16audio_resources(struct pnp_dev *dev) return; } +static int quirk_smc_fir_enabled(struct pnp_dev *dev) +{ + unsigned long firbase; + u8 bank, high, low, chip; + + if (!pnp_port_valid(dev, 1)) + return 0; + + firbase = pnp_port_start(dev, 1); + + /* Select register bank 3 */ + bank = inb(firbase + 7); + bank &= 0xf0; + bank |= 3; + outb(bank, firbase + 7); + + high = inb(firbase + 0); + low = inb(firbase + 1); + chip = inb(firbase + 2); + + /* This corresponds to the check in smsc_ircc_present() */ + if (high == 0x10 && low == 0xb8 && (chip == 0xf1 || chip == 0xf2)) + return 1; + + return 0; +} + static void quirk_smc_enable(struct pnp_dev *dev) { - unsigned int firbase; + struct resource fir, sir, irq; - if (!dev->active || !pnp_port_valid(dev, 1)) + pnp_activate_dev(dev); + if (quirk_smc_fir_enabled(dev)) return; /* - * On the HP/Compaq nw8240 (and probably other similar machines), - * there is an SMCF010 device with two I/O port regions: - * - * 0x3e8-0x3ef SIR - * 0x100-0x10f FIR + * Sometimes the BIOS claims the device is enabled, but it reports + * the wrong FIR resources or doesn't properly configure ISA or LPC + * bridges on the way to the device. * - * _STA reports the device is enabled, but in fact, the BIOS - * neglects to enable the FIR range. Fortunately, it does fully - * enable the device if we call _SRS. + * HP nc6000 and nc8000/nw8000 laptops have known problems like + * this. Fortunately, they do fix things up if we auto-configure + * the device using its _PRS and _SRS methods. */ - firbase = pnp_port_start(dev, 1); - if (inb(firbase + 0x7 /* IRCC_MASTER */) == 0xff) { - pnp_err("%s (%s) enabled but not responding, disabling and " - "re-enabling", dev->dev.bus_id, pnp_dev_name(dev)); - pnp_disable_dev(dev); - pnp_activate_dev(dev); + dev_err(&dev->dev, "%s not responding at SIR 0x%lx, FIR 0x%lx; " + "auto-configuring\n", dev->id->id, + (unsigned long) pnp_port_start(dev, 0), + (unsigned long) pnp_port_start(dev, 1)); + + pnp_disable_dev(dev); + pnp_init_resource_table(&dev->res); + pnp_auto_config_dev(dev); + pnp_activate_dev(dev); + if (quirk_smc_fir_enabled(dev)) { + dev_err(&dev->dev, "responds at SIR 0x%lx, FIR 0x%lx\n", + (unsigned long) pnp_port_start(dev, 0), + (unsigned long) pnp_port_start(dev, 1)); + return; } + + /* + * The Toshiba Portege 4000 _CRS reports the FIR region first, + * followed by the SIR region. The BIOS will configure the bridge, + * but only if we call _SRS with SIR first, then FIR. It also + * reports the IRQ as active high, when it is really active low. + */ + dev_err(&dev->dev, "not responding at SIR 0x%lx, FIR 0x%lx; " + "swapping SIR/FIR and reconfiguring\n", + (unsigned long) pnp_port_start(dev, 0), + (unsigned long) pnp_port_start(dev, 1)); + + /* + * Clear IORESOURCE_AUTO so pnp_activate_dev() doesn't reassign + * these resources any more. + */ + fir = dev->res.port_resource[0]; + sir = dev->res.port_resource[1]; + fir.flags &= ~IORESOURCE_AUTO; + sir.flags &= ~IORESOURCE_AUTO; + + irq = dev->res.irq_resource[0]; + irq.flags &= ~IORESOURCE_AUTO; + irq.flags &= ~IORESOURCE_BITS; + irq.flags |= IORESOURCE_IRQ_LOWEDGE; + + pnp_disable_dev(dev); + dev->res.port_resource[0] = sir; + dev->res.port_resource[1] = fir; + dev->res.irq_resource[0] = irq; + pnp_activate_dev(dev); + + if (quirk_smc_fir_enabled(dev)) { + dev_err(&dev->dev, "responds at SIR 0x%lx, FIR 0x%lx\n", + (unsigned long) pnp_port_start(dev, 0), + (unsigned long) pnp_port_start(dev, 1)); + return; + } + + dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\" and " + "email bjorn.helgaas@hp.com\n"); } |