diff options
Diffstat (limited to 'drivers/phy')
-rw-r--r-- | drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c | 3 | ||||
-rw-r--r-- | drivers/phy/broadcom/Kconfig | 3 | ||||
-rw-r--r-- | drivers/phy/broadcom/phy-brcm-usb.c | 38 | ||||
-rw-r--r-- | drivers/phy/cadence/phy-cadence-sierra.c | 35 | ||||
-rw-r--r-- | drivers/phy/mediatek/phy-mtk-tphy.c | 2 | ||||
-rw-r--r-- | drivers/phy/phy-core-mipi-dphy.c | 4 | ||||
-rw-r--r-- | drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c | 3 | ||||
-rw-r--r-- | drivers/phy/st/phy-stm32-usbphyc.c | 2 | ||||
-rw-r--r-- | drivers/phy/ti/phy-j721e-wiz.c | 1 | ||||
-rw-r--r-- | drivers/phy/xilinx/phy-zynqmp.c | 11 |
10 files changed, 75 insertions, 27 deletions
diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c index cd2332bf0e31..fdbd64c03e12 100644 --- a/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c +++ b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c @@ -9,6 +9,7 @@ #include <linux/bitfield.h> #include <linux/bitops.h> +#include <linux/bits.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/io.h> @@ -250,7 +251,7 @@ static int phy_meson_axg_mipi_dphy_power_on(struct phy *phy) (DIV_ROUND_UP(priv->config.clk_zero, temp) << 16) | (DIV_ROUND_UP(priv->config.clk_prepare, temp) << 24)); regmap_write(priv->regmap, MIPI_DSI_CLK_TIM1, - DIV_ROUND_UP(priv->config.clk_pre, temp)); + DIV_ROUND_UP(priv->config.clk_pre, BITS_PER_BYTE)); regmap_write(priv->regmap, MIPI_DSI_HS_TIM, DIV_ROUND_UP(priv->config.hs_exit, temp) | diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig index f81e23742079..849c4204f550 100644 --- a/drivers/phy/broadcom/Kconfig +++ b/drivers/phy/broadcom/Kconfig @@ -97,8 +97,7 @@ config PHY_BRCM_USB depends on OF select GENERIC_PHY select SOC_BRCMSTB if ARCH_BRCMSTB - default ARCH_BCM4908 - default ARCH_BRCMSTB + default ARCH_BCM4908 || ARCH_BRCMSTB help Enable this to support the Broadcom STB USB PHY. This driver is required by the USB XHCI, EHCI and OHCI diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c index 116fb23aebd9..0f1deb6e0eab 100644 --- a/drivers/phy/broadcom/phy-brcm-usb.c +++ b/drivers/phy/broadcom/phy-brcm-usb.c @@ -18,6 +18,7 @@ #include <linux/soc/brcmstb/brcmstb.h> #include <dt-bindings/phy/phy.h> #include <linux/mfd/syscon.h> +#include <linux/suspend.h> #include "phy-brcm-usb-init.h" @@ -70,12 +71,35 @@ struct brcm_usb_phy_data { int init_count; int wake_irq; struct brcm_usb_phy phys[BRCM_USB_PHY_ID_MAX]; + struct notifier_block pm_notifier; + bool pm_active; }; static s8 *node_reg_names[BRCM_REGS_MAX] = { "crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec" }; +static int brcm_pm_notifier(struct notifier_block *notifier, + unsigned long pm_event, + void *unused) +{ + struct brcm_usb_phy_data *priv = + container_of(notifier, struct brcm_usb_phy_data, pm_notifier); + + switch (pm_event) { + case PM_HIBERNATION_PREPARE: + case PM_SUSPEND_PREPARE: + priv->pm_active = true; + break; + case PM_POST_RESTORE: + case PM_POST_HIBERNATION: + case PM_POST_SUSPEND: + priv->pm_active = false; + break; + } + return NOTIFY_DONE; +} + static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id) { struct phy *gphy = dev_id; @@ -91,6 +115,9 @@ static int brcm_usb_phy_init(struct phy *gphy) struct brcm_usb_phy_data *priv = container_of(phy, struct brcm_usb_phy_data, phys[phy->id]); + if (priv->pm_active) + return 0; + /* * Use a lock to make sure a second caller waits until * the base phy is inited before using it. @@ -120,6 +147,9 @@ static int brcm_usb_phy_exit(struct phy *gphy) struct brcm_usb_phy_data *priv = container_of(phy, struct brcm_usb_phy_data, phys[phy->id]); + if (priv->pm_active) + return 0; + dev_dbg(&gphy->dev, "EXIT\n"); if (phy->id == BRCM_USB_PHY_2_0) brcm_usb_uninit_eohci(&priv->ini); @@ -488,6 +518,9 @@ static int brcm_usb_phy_probe(struct platform_device *pdev) if (err) return err; + priv->pm_notifier.notifier_call = brcm_pm_notifier; + register_pm_notifier(&priv->pm_notifier); + mutex_init(&priv->mutex); /* make sure invert settings are correct */ @@ -528,7 +561,10 @@ static int brcm_usb_phy_probe(struct platform_device *pdev) static int brcm_usb_phy_remove(struct platform_device *pdev) { + struct brcm_usb_phy_data *priv = dev_get_drvdata(&pdev->dev); + sysfs_remove_group(&pdev->dev.kobj, &brcm_usb_phy_group); + unregister_pm_notifier(&priv->pm_notifier); return 0; } @@ -539,6 +575,7 @@ static int brcm_usb_phy_suspend(struct device *dev) struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); if (priv->init_count) { + dev_dbg(dev, "SUSPEND\n"); priv->ini.wake_enabled = device_may_wakeup(dev); if (priv->phys[BRCM_USB_PHY_3_0].inited) brcm_usb_uninit_xhci(&priv->ini); @@ -578,6 +615,7 @@ static int brcm_usb_phy_resume(struct device *dev) * Uninitialize anything that wasn't previously initialized. */ if (priv->init_count) { + dev_dbg(dev, "RESUME\n"); if (priv->wake_irq >= 0) disable_irq_wake(priv->wake_irq); brcm_usb_init_common(&priv->ini); diff --git a/drivers/phy/cadence/phy-cadence-sierra.c b/drivers/phy/cadence/phy-cadence-sierra.c index da24acd26666..e265647e29a2 100644 --- a/drivers/phy/cadence/phy-cadence-sierra.c +++ b/drivers/phy/cadence/phy-cadence-sierra.c @@ -1338,7 +1338,7 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; const struct cdns_sierra_data *data; unsigned int id_value; - int i, ret, node = 0; + int ret, node = 0; void __iomem *base; struct device_node *dn = dev->of_node, *child; @@ -1416,7 +1416,8 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev) dev_err(dev, "failed to get reset %s\n", child->full_name); ret = PTR_ERR(sp->phys[node].lnk_rst); - goto put_child2; + of_node_put(child); + goto put_control; } if (!sp->autoconf) { @@ -1424,7 +1425,9 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev) if (ret) { dev_err(dev, "missing property in node %s\n", child->name); - goto put_child; + of_node_put(child); + reset_control_put(sp->phys[node].lnk_rst); + goto put_control; } } @@ -1434,7 +1437,9 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev) if (IS_ERR(gphy)) { ret = PTR_ERR(gphy); - goto put_child; + of_node_put(child); + reset_control_put(sp->phys[node].lnk_rst); + goto put_control; } sp->phys[node].phy = gphy; phy_set_drvdata(gphy, &sp->phys[node]); @@ -1446,26 +1451,28 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev) if (sp->num_lanes > SIERRA_MAX_LANES) { ret = -EINVAL; dev_err(dev, "Invalid lane configuration\n"); - goto put_child2; + goto put_control; } /* If more than one subnode, configure the PHY as multilink */ if (!sp->autoconf && sp->nsubnodes > 1) { ret = cdns_sierra_phy_configure_multilink(sp); if (ret) - goto put_child2; + goto put_control; } pm_runtime_enable(dev); phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); - return PTR_ERR_OR_ZERO(phy_provider); - -put_child: - node++; -put_child2: - for (i = 0; i < node; i++) - reset_control_put(sp->phys[i].lnk_rst); - of_node_put(child); + if (IS_ERR(phy_provider)) { + ret = PTR_ERR(phy_provider); + goto put_control; + } + + return 0; + +put_control: + while (--node >= 0) + reset_control_put(sp->phys[node].lnk_rst); clk_disable: cdns_sierra_phy_disable_clocks(sp); reset_control_assert(sp->apb_rst); diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c index 6d307102f4f6..8ee7682b8e93 100644 --- a/drivers/phy/mediatek/phy-mtk-tphy.c +++ b/drivers/phy/mediatek/phy-mtk-tphy.c @@ -992,7 +992,7 @@ static int phy_efuse_get(struct mtk_tphy *tphy, struct mtk_phy_instance *instanc /* no efuse, ignore it */ if (!instance->efuse_intr && !instance->efuse_rx_imp && - !instance->efuse_rx_imp) { + !instance->efuse_tx_imp) { dev_warn(dev, "no u3 intr efuse, but dts enable it\n"); instance->efuse_sw_en = 0; break; diff --git a/drivers/phy/phy-core-mipi-dphy.c b/drivers/phy/phy-core-mipi-dphy.c index 288c9c67aa74..ccb4045685cd 100644 --- a/drivers/phy/phy-core-mipi-dphy.c +++ b/drivers/phy/phy-core-mipi-dphy.c @@ -36,7 +36,7 @@ int phy_mipi_dphy_get_default_config(unsigned long pixel_clock, cfg->clk_miss = 0; cfg->clk_post = 60000 + 52 * ui; - cfg->clk_pre = 8000; + cfg->clk_pre = 8; cfg->clk_prepare = 38000; cfg->clk_settle = 95000; cfg->clk_term_en = 0; @@ -97,7 +97,7 @@ int phy_mipi_dphy_config_validate(struct phy_configure_opts_mipi_dphy *cfg) if (cfg->clk_post < (60000 + 52 * ui)) return -EINVAL; - if (cfg->clk_pre < 8000) + if (cfg->clk_pre < 8) return -EINVAL; if (cfg->clk_prepare < 38000 || cfg->clk_prepare > 95000) diff --git a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c index 347dc79a18c1..630e01b5c19b 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c @@ -5,6 +5,7 @@ * Author: Wyon Bi <bivvy.bi@rock-chips.com> */ +#include <linux/bits.h> #include <linux/kernel.h> #include <linux/clk.h> #include <linux/iopoll.h> @@ -364,7 +365,7 @@ static void inno_dsidphy_mipi_mode_enable(struct inno_dsidphy *inno) * The value of counter for HS Tclk-pre * Tclk-pre = Tpin_txbyteclkhs * value */ - clk_pre = DIV_ROUND_UP(cfg->clk_pre, t_txbyteclkhs); + clk_pre = DIV_ROUND_UP(cfg->clk_pre, BITS_PER_BYTE); /* * The value of counter for HS Tlpx Time diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c index 2ce9bfd783d4..007a23c78d56 100644 --- a/drivers/phy/st/phy-stm32-usbphyc.c +++ b/drivers/phy/st/phy-stm32-usbphyc.c @@ -304,7 +304,7 @@ static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) ret = __stm32_usbphyc_pll_disable(usbphyc); if (ret) - return ret; + goto dec_n_pll_cons; } ret = stm32_usbphyc_regulators_enable(usbphyc); diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c index b3384c31637a..da546c35d1d5 100644 --- a/drivers/phy/ti/phy-j721e-wiz.c +++ b/drivers/phy/ti/phy-j721e-wiz.c @@ -233,6 +233,7 @@ static const struct clk_div_table clk_div_table[] = { { .val = 1, .div = 2, }, { .val = 2, .div = 4, }, { .val = 3, .div = 8, }, + { /* sentinel */ }, }; static const struct wiz_clk_div_sel clk_div_sel[] = { diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c index f478d8a17115..9be9535ad7ab 100644 --- a/drivers/phy/xilinx/phy-zynqmp.c +++ b/drivers/phy/xilinx/phy-zynqmp.c @@ -134,7 +134,8 @@ #define PROT_BUS_WIDTH_10 0x0 #define PROT_BUS_WIDTH_20 0x1 #define PROT_BUS_WIDTH_40 0x2 -#define PROT_BUS_WIDTH_SHIFT 2 +#define PROT_BUS_WIDTH_SHIFT(n) ((n) * 2) +#define PROT_BUS_WIDTH_MASK(n) GENMASK((n) * 2 + 1, (n) * 2) /* Number of GT lanes */ #define NUM_LANES 4 @@ -445,12 +446,12 @@ static void xpsgtr_phy_init_sata(struct xpsgtr_phy *gtr_phy) static void xpsgtr_phy_init_sgmii(struct xpsgtr_phy *gtr_phy) { struct xpsgtr_dev *gtr_dev = gtr_phy->dev; + u32 mask = PROT_BUS_WIDTH_MASK(gtr_phy->lane); + u32 val = PROT_BUS_WIDTH_10 << PROT_BUS_WIDTH_SHIFT(gtr_phy->lane); /* Set SGMII protocol TX and RX bus width to 10 bits. */ - xpsgtr_write(gtr_dev, TX_PROT_BUS_WIDTH, - PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT)); - xpsgtr_write(gtr_dev, RX_PROT_BUS_WIDTH, - PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT)); + xpsgtr_clr_set(gtr_dev, TX_PROT_BUS_WIDTH, mask, val); + xpsgtr_clr_set(gtr_dev, RX_PROT_BUS_WIDTH, mask, val); xpsgtr_bypass_scrambler_8b10b(gtr_phy); } |