summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r--drivers/net/wireless/airo_cs.c17
-rw-r--r--drivers/net/wireless/atmel_cs.c17
-rw-r--r--drivers/net/wireless/hostap/hostap_cs.c27
-rw-r--r--drivers/net/wireless/libertas/if_cs.c1
-rw-r--r--drivers/net/wireless/orinoco/orinoco_cs.c31
-rw-r--r--drivers/net/wireless/orinoco/spectrum_cs.c24
6 files changed, 16 insertions, 101 deletions
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 5939d0c7a5c8..63bf662e9c7f 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -140,25 +140,11 @@ static void airo_detach(struct pcmcia_device *link)
static int airo_cs_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
void *priv_data)
{
if (cfg->index == 0)
return -ENODEV;
- /* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO)
- p_dev->config_flags |= CONF_ENABLE_SPKR;
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
- p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
- else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
- p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
-
- p_dev->config_flags |= CONF_ENABLE_IRQ;
-
/* IO window settings */
p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
@@ -193,6 +179,9 @@ static int airo_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "airo_config\n");
+ link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
+ CONF_AUTO_AUDIO;
+
/*
* In this loop, we scan the CIS for configuration table
* entries, each of which describes a valid card
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 080266eba985..812decd3fbe9 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -157,25 +157,11 @@ static int card_present(void *arg)
static int atmel_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
void *priv_data)
{
if (cfg->index == 0)
return -ENODEV;
- /* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO)
- p_dev->config_flags |= CONF_ENABLE_SPKR;
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
- p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
- else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
- p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
-
- p_dev->config_flags |= CONF_ENABLE_IRQ;
-
/* IO window settings */
p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
@@ -207,6 +193,9 @@ static int atmel_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "atmel_config\n");
+ link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
+ CONF_AUTO_AUDIO;
+
/*
In this loop, we scan the CIS for configuration table entries,
each of which describes a valid card configuration, including
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 5b0b5828b3cf..d4f19af1757f 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -472,7 +472,6 @@ static void prism2_detach(struct pcmcia_device *link)
static int prism2_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
void *priv_data)
{
if (cfg->index == 0)
@@ -481,28 +480,6 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
"(default 0x%02X)\n", cfg->index, dflt->index);
- /* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO)
- p_dev->config_flags |= CONF_ENABLE_SPKR;
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
- 10000 && !ignore_cis_vcc) {
- PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping"
- " this entry\n");
- return -ENODEV;
- }
- } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] /
- 10000 && !ignore_cis_vcc) {
- PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch "
- "- skipping this entry\n");
- return -ENODEV;
- }
- }
-
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
@@ -553,6 +530,10 @@ static int prism2_config(struct pcmcia_device *link)
}
/* Look for an appropriate configuration table entry in the CIS */
+ link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO |
+ CONF_AUTO_CHECK_VCC;
+ if (ignore_cis_vcc)
+ link->config_flags &= ~CONF_AUTO_CHECK_VCC;
ret = pcmcia_loop_config(link, prism2_config_check, NULL);
if (ret) {
if (!ignore_cis_vcc)
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 6020c19b1bdb..031f3e6da3c9 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -797,7 +797,6 @@ static void if_cs_release(struct pcmcia_device *p_dev)
static int if_cs_ioprobe(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
void *priv_data)
{
p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 00316a1a1092..b92173827b55 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -145,39 +145,11 @@ static void orinoco_cs_detach(struct pcmcia_device *link)
static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
void *priv_data)
{
if (cfg->index == 0)
goto next_entry;
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n",
- __func__, vcc,
- cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
- if (!ignore_cis_vcc)
- goto next_entry;
- }
- } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n",
- __func__, vcc,
- dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
- if (!ignore_cis_vcc)
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- p_dev->vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
- p_dev->vpp =
- dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
/* Do we need to allocate an interrupt? */
p_dev->config_flags |= CONF_ENABLE_IRQ;
@@ -230,6 +202,9 @@ orinoco_cs_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
+ link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC;
+ if (ignore_cis_vcc)
+ link->config_flags &= ~CONF_AUTO_CHECK_VCC;
ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
if (ret) {
if (!ignore_cis_vcc)
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index ca2c6c0c5576..f462c78856e9 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -207,32 +207,11 @@ static void spectrum_cs_detach(struct pcmcia_device *link)
static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
void *priv_data)
{
if (cfg->index == 0)
goto next_entry;
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n",
- __func__, vcc,
- cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
- if (!ignore_cis_vcc)
- goto next_entry;
- }
- } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n",
- __func__, vcc,
- dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
- if (!ignore_cis_vcc)
- goto next_entry;
- }
- }
-
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
p_dev->vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
@@ -292,6 +271,9 @@ spectrum_cs_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
+ link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC;
+ if (ignore_cis_vcc)
+ link->config_flags &= ~CONF_AUTO_CHECK_VCC;
ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
if (ret) {
if (!ignore_cis_vcc)
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-19 11:23:12 +0300