diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/ich8lan.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 55 |
1 files changed, 55 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index f9e94be36e97..ce227b56cf72 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1109,6 +1109,46 @@ static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link) } /** + * e1000e_force_smbus - Force interfaces to transition to SMBUS mode. + * @hw: pointer to the HW structure + * + * Force the MAC and the PHY to SMBUS mode. Assumes semaphore already + * acquired. + * + * Return: 0 on success, negative errno on failure. + **/ +static s32 e1000e_force_smbus(struct e1000_hw *hw) +{ + u16 smb_ctrl = 0; + u32 ctrl_ext; + s32 ret_val; + + /* Switching PHY interface always returns MDI error + * so disable retry mechanism to avoid wasting time + */ + e1000e_disable_phy_retry(hw); + + /* Force SMBus mode in the PHY */ + ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &smb_ctrl); + if (ret_val) { + e1000e_enable_phy_retry(hw); + return ret_val; + } + + smb_ctrl |= CV_SMB_CTRL_FORCE_SMBUS; + e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, smb_ctrl); + + e1000e_enable_phy_retry(hw); + + /* Force SMBus mode in the MAC */ + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, ctrl_ext); + + return 0; +} + +/** * e1000_enable_ulp_lpt_lp - configure Ultra Low Power mode for LynxPoint-LP * @hw: pointer to the HW structure * @to_sx: boolean indicating a system power state transition to Sx @@ -1165,6 +1205,14 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) if (ret_val) goto out; + if (hw->mac.type != e1000_pch_mtp) { + ret_val = e1000e_force_smbus(hw); + if (ret_val) { + e_dbg("Failed to force SMBUS: %d\n", ret_val); + goto release; + } + } + /* Si workaround for ULP entry flow on i127/rev6 h/w. Enable * LPLU and disable Gig speed when entering ULP */ @@ -1225,6 +1273,13 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) } release: + if (hw->mac.type == e1000_pch_mtp) { + ret_val = e1000e_force_smbus(hw); + if (ret_val) + e_dbg("Failed to force SMBUS over MTL system: %d\n", + ret_val); + } + hw->phy.ops.release(hw); out: if (ret_val) |