diff options
Diffstat (limited to 'drivers/net/ethernet/freescale/enetc/enetc_pf.c')
-rw-r--r-- | drivers/net/ethernet/freescale/enetc/enetc_pf.c | 104 |
1 files changed, 87 insertions, 17 deletions
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index 515c5b29d7aa..224fc37a6757 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -190,7 +190,6 @@ static void enetc_pf_set_rx_mode(struct net_device *ndev) { struct enetc_ndev_priv *priv = netdev_priv(ndev); struct enetc_pf *pf = enetc_si_priv(priv->si); - char vlan_promisc_simap = pf->vlan_promisc_simap; struct enetc_hw *hw = &priv->si->hw; bool uprom = false, mprom = false; struct enetc_mac_filter *filter; @@ -203,16 +202,12 @@ static void enetc_pf_set_rx_mode(struct net_device *ndev) psipmr = ENETC_PSIPMR_SET_UP(0) | ENETC_PSIPMR_SET_MP(0); uprom = true; mprom = true; - /* Enable VLAN promiscuous mode for SI0 (PF) */ - vlan_promisc_simap |= BIT(0); } else if (ndev->flags & IFF_ALLMULTI) { /* enable multi cast promisc mode for SI0 (PF) */ psipmr = ENETC_PSIPMR_SET_MP(0); mprom = true; } - enetc_set_vlan_promisc(&pf->si->hw, vlan_promisc_simap); - /* first 2 filter entries belong to PF */ if (!uprom) { /* Update unicast filters */ @@ -320,7 +315,7 @@ static void enetc_set_loopback(struct net_device *ndev, bool en) u32 reg; reg = enetc_port_rd(hw, ENETC_PM0_IF_MODE); - if (reg & ENETC_PMO_IFM_RG) { + if (reg & ENETC_PM0_IFM_RG) { /* RGMII mode */ reg = (reg & ~ENETC_PM0_IFM_RLP) | (en ? ENETC_PM0_IFM_RLP : 0); @@ -495,17 +490,30 @@ static void enetc_configure_port_mac(struct enetc_hw *hw) enetc_port_wr(hw, ENETC_PM1_CMD_CFG, ENETC_PM0_CMD_PHY_TX_EN | ENETC_PM0_CMD_TXP | ENETC_PM0_PROMISC); + + /* On LS1028A, the MAC RX FIFO defaults to 2, which is too high + * and may lead to RX lock-up under traffic. Set it to 1 instead, + * as recommended by the hardware team. + */ + enetc_port_wr(hw, ENETC_PM0_RX_FIFO, ENETC_PM0_RX_FIFO_VAL); } static void enetc_mac_config(struct enetc_hw *hw, phy_interface_t phy_mode) { - /* set auto-speed for RGMII */ - if (enetc_port_rd(hw, ENETC_PM0_IF_MODE) & ENETC_PMO_IFM_RG || - phy_interface_mode_is_rgmii(phy_mode)) - enetc_port_wr(hw, ENETC_PM0_IF_MODE, ENETC_PM0_IFM_RGAUTO); + u32 val; + + if (phy_interface_mode_is_rgmii(phy_mode)) { + val = enetc_port_rd(hw, ENETC_PM0_IF_MODE); + val &= ~ENETC_PM0_IFM_EN_AUTO; + val &= ENETC_PM0_IFM_IFMODE_MASK; + val |= ENETC_PM0_IFM_IFMODE_GMII | ENETC_PM0_IFM_RG; + enetc_port_wr(hw, ENETC_PM0_IF_MODE, val); + } - if (phy_mode == PHY_INTERFACE_MODE_USXGMII) - enetc_port_wr(hw, ENETC_PM0_IF_MODE, ENETC_PM0_IFM_XGMII); + if (phy_mode == PHY_INTERFACE_MODE_USXGMII) { + val = ENETC_PM0_IFM_FULL_DPX | ENETC_PM0_IFM_IFMODE_XGMII; + enetc_port_wr(hw, ENETC_PM0_IF_MODE, val); + } } static void enetc_mac_enable(struct enetc_hw *hw, bool en) @@ -937,6 +945,34 @@ static void enetc_pl_mac_config(struct phylink_config *config, phylink_set_pcs(priv->phylink, &pf->pcs->pcs); } +static void enetc_force_rgmii_mac(struct enetc_hw *hw, int speed, int duplex) +{ + u32 old_val, val; + + old_val = val = enetc_port_rd(hw, ENETC_PM0_IF_MODE); + + if (speed == SPEED_1000) { + val &= ~ENETC_PM0_IFM_SSP_MASK; + val |= ENETC_PM0_IFM_SSP_1000; + } else if (speed == SPEED_100) { + val &= ~ENETC_PM0_IFM_SSP_MASK; + val |= ENETC_PM0_IFM_SSP_100; + } else if (speed == SPEED_10) { + val &= ~ENETC_PM0_IFM_SSP_MASK; + val |= ENETC_PM0_IFM_SSP_10; + } + + if (duplex == DUPLEX_FULL) + val |= ENETC_PM0_IFM_FULL_DPX; + else + val &= ~ENETC_PM0_IFM_FULL_DPX; + + if (val == old_val) + return; + + enetc_port_wr(hw, ENETC_PM0_IF_MODE, val); +} + static void enetc_pl_mac_link_up(struct phylink_config *config, struct phy_device *phy, unsigned int mode, phy_interface_t interface, int speed, @@ -949,6 +985,10 @@ static void enetc_pl_mac_link_up(struct phylink_config *config, if (priv->active_offloads & ENETC_F_QBV) enetc_sched_speed_set(priv, speed); + if (!phylink_autoneg_inband(mode) && + phy_interface_mode_is_rgmii(interface)) + enetc_force_rgmii_mac(&pf->si->hw, speed, duplex); + enetc_mac_enable(&pf->si->hw, true); } @@ -1041,6 +1081,26 @@ static int enetc_init_port_rss_memory(struct enetc_si *si) return err; } +static void enetc_init_unused_port(struct enetc_si *si) +{ + struct device *dev = &si->pdev->dev; + struct enetc_hw *hw = &si->hw; + int err; + + si->cbd_ring.bd_count = ENETC_CBDR_DEFAULT_SIZE; + err = enetc_alloc_cbdr(dev, &si->cbd_ring); + if (err) + return; + + enetc_setup_cbdr(hw, &si->cbd_ring); + + enetc_init_port_rfs_memory(si); + enetc_init_port_rss_memory(si); + + enetc_clear_cbdr(hw); + enetc_free_cbdr(dev, &si->cbd_ring); +} + static int enetc_pf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -1051,11 +1111,6 @@ static int enetc_pf_probe(struct pci_dev *pdev, struct enetc_pf *pf; int err; - if (node && !of_device_is_available(node)) { - dev_info(&pdev->dev, "device is disabled, skipping\n"); - return -ENODEV; - } - err = enetc_pci_probe(pdev, KBUILD_MODNAME, sizeof(*pf)); if (err) { dev_err(&pdev->dev, "PCI probing failed\n"); @@ -1069,6 +1124,13 @@ static int enetc_pf_probe(struct pci_dev *pdev, goto err_map_pf_space; } + if (node && !of_device_is_available(node)) { + enetc_init_unused_port(si); + dev_info(&pdev->dev, "device is disabled, skipping\n"); + err = -ENODEV; + goto err_device_disabled; + } + pf = enetc_si_priv(si); pf->si = si; pf->total_vfs = pci_sriov_get_totalvfs(pdev); @@ -1108,6 +1170,12 @@ static int enetc_pf_probe(struct pci_dev *pdev, goto err_init_port_rss; } + err = enetc_configure_si(priv); + if (err) { + dev_err(&pdev->dev, "Failed to configure SI\n"); + goto err_config_si; + } + err = enetc_alloc_msix(priv); if (err) { dev_err(&pdev->dev, "MSIX alloc failed\n"); @@ -1136,6 +1204,7 @@ err_phylink_create: enetc_mdiobus_destroy(pf); err_mdiobus_create: enetc_free_msix(priv); +err_config_si: err_init_port_rss: err_init_port_rfs: err_alloc_msix: @@ -1144,6 +1213,7 @@ err_alloc_si_res: si->ndev = NULL; free_netdev(ndev); err_alloc_netdev: +err_device_disabled: err_map_pf_space: enetc_pci_remove(pdev); |