2 files changed, 63 insertions, 9 deletions

diff --git a/drivers/net/dsa/microchip/ksz8.c b/drivers/net/dsa/microchip/ksz8.c
index 76e490070e9c..c354abdafc1b 100644
--- a/drivers/net/dsa/microchip/ksz8.c
+++ b/drivers/net/dsa/microchip/ksz8.c
@@ -36,15 +36,14 @@
 
 static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
 {
-	regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0);
+	ksz_rmw8(dev, addr, bits, set ? bits : 0);
 }
 
 static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
 			 bool set)
 {
-	regmap_update_bits(ksz_regmap_8(dev),
-			   dev->dev_ops->get_port_addr(port, offset),
-			   bits, set ? bits : 0);
+	ksz_rmw8(dev, dev->dev_ops->get_port_addr(port, offset), bits,
+		 set ? bits : 0);
 }
 
 /**
@@ -1955,16 +1954,19 @@ int ksz8_setup(struct dsa_switch *ds)
 	ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true);
 
 	/* Enable aggressive back off algorithm in half duplex mode. */
-	regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_1,
-			   SW_AGGR_BACKOFF, SW_AGGR_BACKOFF);
+	ret = ksz_rmw8(dev, REG_SW_CTRL_1, SW_AGGR_BACKOFF, SW_AGGR_BACKOFF);
+	if (ret)
+		return ret;
 
 	/*
 	 * Make sure unicast VLAN boundary is set as default and
 	 * enable no excessive collision drop.
 	 */
-	regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_2,
-			   UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP,
-			   UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP);
+	ret = ksz_rmw8(dev, REG_SW_CTRL_2,
+		       UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP,
+		       UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP);
+	if (ret)
+		return ret;
 
 	ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_REPLACE_VID, false);
 
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 7292bfe2f7ca..a962055bfdbd 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -23,6 +23,7 @@
 #include <linux/of_mdio.h>
 #include <linux/of_net.h>
 #include <linux/micrel_phy.h>
+#include <linux/pinctrl/consumer.h>
 #include <net/dsa.h>
 #include <net/ieee8021q.h>
 #include <net/pkt_cls.h>
@@ -1447,6 +1448,7 @@ static const struct regmap_range ksz8873_valid_regs[] = {
 	regmap_reg_range(0x3f, 0x3f),
 
 	/* advanced control registers */
+	regmap_reg_range(0x43, 0x43),
 	regmap_reg_range(0x60, 0x6f),
 	regmap_reg_range(0x70, 0x75),
 	regmap_reg_range(0x76, 0x78),
@@ -2456,6 +2458,12 @@ static void ksz_update_port_member(struct ksz_device *dev, int port)
 		dev->dev_ops->cfg_port_member(dev, i, val | cpu_port);
 	}
 
+	/* HSR ports are setup once so need to use the assigned membership
+	 * when the port is enabled.
+	 */
+	if (!port_member && p->stp_state == BR_STATE_FORWARDING &&
+	    (dev->hsr_ports & BIT(port)))
+		port_member = dev->hsr_ports;
 	dev->dev_ops->cfg_port_member(dev, port, port_member | cpu_port);
 }
 
@@ -5338,6 +5346,38 @@ static int ksz_parse_drive_strength(struct ksz_device *dev)
 	return 0;
 }
 
+static int ksz8463_configure_straps_spi(struct ksz_device *dev)
+{
+	struct pinctrl *pinctrl;
+	struct gpio_desc *rxd0;
+	struct gpio_desc *rxd1;
+
+	rxd0 = devm_gpiod_get_index_optional(dev->dev, "straps-rxd", 0, GPIOD_OUT_LOW);
+	if (IS_ERR(rxd0))
+		return PTR_ERR(rxd0);
+
+	rxd1 = devm_gpiod_get_index_optional(dev->dev, "straps-rxd", 1, GPIOD_OUT_HIGH);
+	if (IS_ERR(rxd1))
+		return PTR_ERR(rxd1);
+
+	if (!rxd0 && !rxd1)
+		return 0;
+
+	if ((rxd0 && !rxd1) || (rxd1 && !rxd0))
+		return -EINVAL;
+
+	pinctrl = devm_pinctrl_get_select(dev->dev, "reset");
+	if (IS_ERR(pinctrl))
+		return PTR_ERR(pinctrl);
+
+	return 0;
+}
+
+static int ksz8463_release_straps_spi(struct ksz_device *dev)
+{
+	return pinctrl_select_default_state(dev->dev);
+}
+
 int ksz_switch_register(struct ksz_device *dev)
 {
 	const struct ksz_chip_data *info;
@@ -5353,10 +5393,22 @@ int ksz_switch_register(struct ksz_device *dev)
 		return PTR_ERR(dev->reset_gpio);
 
 	if (dev->reset_gpio) {
+		if (of_device_is_compatible(dev->dev->of_node, "microchip,ksz8463")) {
+			ret = ksz8463_configure_straps_spi(dev);
+			if (ret)
+				return ret;
+		}
+
 		gpiod_set_value_cansleep(dev->reset_gpio, 1);
 		usleep_range(10000, 12000);
 		gpiod_set_value_cansleep(dev->reset_gpio, 0);
 		msleep(100);
+
+		if (of_device_is_compatible(dev->dev->of_node, "microchip,ksz8463")) {
+			ret = ksz8463_release_straps_spi(dev);
+			if (ret)
+				return ret;
+		}
 	}
 
 	mutex_init(&dev->dev_mutex);