diff options
Diffstat (limited to 'drivers/mtd/nand/raw/denali.h')
| -rw-r--r-- | drivers/mtd/nand/raw/denali.h | 114 |
1 files changed, 93 insertions, 21 deletions
diff --git a/drivers/mtd/nand/raw/denali.h b/drivers/mtd/nand/raw/denali.h index d2603c67dd20..e5cdcda56d14 100644 --- a/drivers/mtd/nand/raw/denali.h +++ b/drivers/mtd/nand/raw/denali.h @@ -9,6 +9,7 @@ #include <linux/bits.h> #include <linux/completion.h> +#include <linux/list.h> #include <linux/mtd/rawnand.h> #include <linux/spinlock_types.h> #include <linux/types.h> @@ -290,29 +291,98 @@ #define CHNL_ACTIVE__CHANNEL2 BIT(2) #define CHNL_ACTIVE__CHANNEL3 BIT(3) -struct denali_nand_info { - struct nand_chip nand; - unsigned long clk_rate; /* core clock rate */ - unsigned long clk_x_rate; /* bus interface clock rate */ - int active_bank; /* currently selected bank */ +/** + * struct denali_chip_sel - per-CS data of Denali NAND + * + * @bank: bank id of the controller this CS is connected to + * @hwhr2_and_we_2_re: value of timing register HWHR2_AND_WE_2_RE + * @tcwaw_and_addr_2_data: value of timing register TCWAW_AND_ADDR_2_DATA + * @re_2_we: value of timing register RE_2_WE + * @acc_clks: value of timing register ACC_CLKS + * @rdwr_en_lo_cnt: value of timing register RDWR_EN_LO_CNT + * @rdwr_en_hi_cnt: value of timing register RDWR_EN_HI_CNT + * @cs_setup_cnt: value of timing register CS_SETUP_CNT + * @re_2_re: value of timing register RE_2_RE + */ +struct denali_chip_sel { + int bank; + u32 hwhr2_and_we_2_re; + u32 tcwaw_and_addr_2_data; + u32 re_2_we; + u32 acc_clks; + u32 rdwr_en_lo_cnt; + u32 rdwr_en_hi_cnt; + u32 cs_setup_cnt; + u32 re_2_re; +}; + +/** + * struct denali_chip - per-chip data of Denali NAND + * + * @chip: base NAND chip structure + * @node: node to be used to associate this chip with the controller + * @nsels: the number of CS lines of this chip + * @sels: the array of per-cs data + */ +struct denali_chip { + struct nand_chip chip; + struct list_head node; + unsigned int nsels; + struct denali_chip_sel sels[0]; +}; + +/** + * struct denali_controller - Denali NAND controller data + * + * @controller: base NAND controller structure + * @dev: device + * @chips: the list of chips attached to this controller + * @clk_rate: frequency of core clock + * @clk_x_rate: frequency of bus interface clock + * @reg: base of Register Interface + * @host: base of Host Data/Command interface + * @complete: completion used to wait for interrupts + * @irq: interrupt number + * @irq_mask: interrupt bits the controller is waiting for + * @irq_status: interrupt bits of events that have happened + * @irq_lock: lock to protect @irq_mask and @irq_status + * @dma_avail: set if DMA engine is available + * @devs_per_cs: number of devices connected in parallel + * @oob_skip_bytes: number of bytes in OOB skipped by the ECC engine + * @active_bank: active bank id + * @nbanks: the number of banks supported by this controller + * @revision: IP revision + * @caps: controller capabilities that cannot be detected run-time + * @ecc_caps: ECC engine capabilities + * @host_read: callback for read access of Host Data/Command Interface + * @host_write: callback for write access of Host Data/Command Interface + * @setup_dma: callback for setup of the Data DMA + */ +struct denali_controller { + struct nand_controller controller; struct device *dev; - void __iomem *reg; /* Register Interface */ - void __iomem *host; /* Host Data/Command Interface */ + struct list_head chips; + unsigned long clk_rate; + unsigned long clk_x_rate; + void __iomem *reg; + void __iomem *host; struct completion complete; - spinlock_t irq_lock; /* protect irq_mask and irq_status */ - u32 irq_mask; /* interrupts we are waiting for */ - u32 irq_status; /* interrupts that have happened */ int irq; - bool dma_avail; /* can support DMA? */ - int devs_per_cs; /* devices connected in parallel */ - int oob_skip_bytes; /* number of bytes reserved for BBM */ - int max_banks; - unsigned int revision; /* IP revision */ - unsigned int caps; /* IP capability (or quirk) */ + u32 irq_mask; + u32 irq_status; + spinlock_t irq_lock; + bool dma_avail; + int devs_per_cs; + int oob_skip_bytes; + int active_bank; + int nbanks; + unsigned int revision; + unsigned int caps; const struct nand_ecc_caps *ecc_caps; - u32 (*host_read)(struct denali_nand_info *denali, u32 addr); - void (*host_write)(struct denali_nand_info *denali, u32 addr, u32 data); - void (*setup_dma)(struct denali_nand_info *denali, dma_addr_t dma_addr, + u32 (*host_read)(struct denali_controller *denali, u32 addr); + void (*host_write)(struct denali_controller *denali, u32 addr, + u32 data); + void (*setup_dma)(struct denali_controller *denali, dma_addr_t dma_addr, int page, bool write); }; @@ -320,7 +390,9 @@ struct denali_nand_info { #define DENALI_CAP_DMA_64BIT BIT(1) int denali_calc_ecc_bytes(int step_size, int strength); -int denali_init(struct denali_nand_info *denali); -void denali_remove(struct denali_nand_info *denali); +int denali_chip_init(struct denali_controller *denali, + struct denali_chip *dchip); +int denali_init(struct denali_controller *denali); +void denali_remove(struct denali_controller *denali); #endif /* __DENALI_H__ */ |