diff options
Diffstat (limited to 'drivers/mtd/nand/raw/atmel/nand-controller.c')
| -rw-r--r-- | drivers/mtd/nand/raw/atmel/nand-controller.c | 18 |
1 files changed, 14 insertions, 4 deletions
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c index dedcca87defc..db94d14a3807 100644 --- a/drivers/mtd/nand/raw/atmel/nand-controller.c +++ b/drivers/mtd/nand/raw/atmel/nand-controller.c @@ -373,7 +373,7 @@ static int atmel_nand_dma_transfer(struct atmel_nand_controller *nc, dma_cookie_t cookie; buf_dma = dma_map_single(nc->dev, buf, len, dir); - if (dma_mapping_error(nc->dev, dev_dma)) { + if (dma_mapping_error(nc->dev, buf_dma)) { dev_err(nc->dev, "Failed to prepare a buffer for DMA access\n"); goto err; @@ -1378,13 +1378,23 @@ static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand, return ret; /* + * Read setup timing depends on the operation done on the NAND: + * + * NRD_SETUP = max(tAR, tCLR) + */ + timeps = max(conf->timings.sdr.tAR_min, conf->timings.sdr.tCLR_min); + ncycles = DIV_ROUND_UP(timeps, mckperiodps); + totalcycles += ncycles; + ret = atmel_smc_cs_conf_set_setup(smcconf, ATMEL_SMC_NRD_SHIFT, ncycles); + if (ret) + return ret; + + /* * The read cycle timing is directly matching tRC, but is also * dependent on the setup and hold timings we calculated earlier, * which gives: * - * NRD_CYCLE = max(tRC, NRD_PULSE + NRD_HOLD) - * - * NRD_SETUP is always 0. + * NRD_CYCLE = max(tRC, NRD_SETUP + NRD_PULSE + NRD_HOLD) */ ncycles = DIV_ROUND_UP(conf->timings.sdr.tRC_min, mckperiodps); ncycles = max(totalcycles, ncycles); |