diff options
Diffstat (limited to 'drivers/media/pci/zoran/zoran_device.c')
| -rw-r--r-- | drivers/media/pci/zoran/zoran_device.c | 1619 |
1 files changed, 0 insertions, 1619 deletions
diff --git a/drivers/media/pci/zoran/zoran_device.c b/drivers/media/pci/zoran/zoran_device.c deleted file mode 100644 index 40adceebca7e..000000000000 --- a/drivers/media/pci/zoran/zoran_device.c +++ /dev/null @@ -1,1619 +0,0 @@ -/* - * Zoran zr36057/zr36067 PCI controller driver, for the - * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux - * Media Labs LML33/LML33R10. - * - * This part handles device access (PCI/I2C/codec/...) - * - * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> - * - * Currently maintained by: - * Ronald Bultje <rbultje@ronald.bitfreak.net> - * Laurent Pinchart <laurent.pinchart@skynet.be> - * Mailinglist <mjpeg-users@lists.sf.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/vmalloc.h> -#include <linux/ktime.h> -#include <linux/sched/signal.h> - -#include <linux/interrupt.h> -#include <linux/proc_fs.h> -#include <linux/i2c.h> -#include <linux/i2c-algo-bit.h> -#include <linux/videodev2.h> -#include <media/v4l2-common.h> -#include <linux/spinlock.h> -#include <linux/sem.h> - -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/wait.h> - -#include <asm/byteorder.h> -#include <asm/io.h> - -#include "videocodec.h" -#include "zoran.h" -#include "zoran_device.h" -#include "zoran_card.h" - -#define IRQ_MASK ( ZR36057_ISR_GIRQ0 | \ - ZR36057_ISR_GIRQ1 | \ - ZR36057_ISR_JPEGRepIRQ ) - -static bool lml33dpath; /* default = 0 - * 1 will use digital path in capture - * mode instead of analog. It can be - * used for picture adjustments using - * tool like xawtv while watching image - * on TV monitor connected to the output. - * However, due to absence of 75 Ohm - * load on Bt819 input, there will be - * some image imperfections */ - -module_param(lml33dpath, bool, 0644); -MODULE_PARM_DESC(lml33dpath, - "Use digital path capture mode (on LML33 cards)"); - -static void -zr36057_init_vfe (struct zoran *zr); - -/* - * General Purpose I/O and Guest bus access - */ - -/* - * This is a bit tricky. When a board lacks a GPIO function, the corresponding - * GPIO bit number in the card_info structure is set to 0. - */ - -void -GPIO (struct zoran *zr, - int bit, - unsigned int value) -{ - u32 reg; - u32 mask; - - /* Make sure the bit number is legal - * A bit number of -1 (lacking) gives a mask of 0, - * making it harmless */ - mask = (1 << (24 + bit)) & 0xff000000; - reg = btread(ZR36057_GPPGCR1) & ~mask; - if (value) { - reg |= mask; - } - btwrite(reg, ZR36057_GPPGCR1); - udelay(1); -} - -/* - * Wait til post office is no longer busy - */ - -int -post_office_wait (struct zoran *zr) -{ - u32 por; - -// while (((por = btread(ZR36057_POR)) & (ZR36057_POR_POPen | ZR36057_POR_POTime)) == ZR36057_POR_POPen) { - while ((por = btread(ZR36057_POR)) & ZR36057_POR_POPen) { - /* wait for something to happen */ - } - if ((por & ZR36057_POR_POTime) && !zr->card.gws_not_connected) { - /* In LML33/BUZ \GWS line is not connected, so it has always timeout set */ - dprintk(1, KERN_INFO "%s: pop timeout %08x\n", ZR_DEVNAME(zr), - por); - return -1; - } - - return 0; -} - -int -post_office_write (struct zoran *zr, - unsigned int guest, - unsigned int reg, - unsigned int value) -{ - u32 por; - - por = - ZR36057_POR_PODir | ZR36057_POR_POTime | ((guest & 7) << 20) | - ((reg & 7) << 16) | (value & 0xFF); - btwrite(por, ZR36057_POR); - - return post_office_wait(zr); -} - -int -post_office_read (struct zoran *zr, - unsigned int guest, - unsigned int reg) -{ - u32 por; - - por = ZR36057_POR_POTime | ((guest & 7) << 20) | ((reg & 7) << 16); - btwrite(por, ZR36057_POR); - if (post_office_wait(zr) < 0) { - return -1; - } - - return btread(ZR36057_POR) & 0xFF; -} - -/* - * detect guests - */ - -static void -dump_guests (struct zoran *zr) -{ - if (zr36067_debug > 2) { - int i, guest[8]; - - for (i = 1; i < 8; i++) { // Don't read jpeg codec here - guest[i] = post_office_read(zr, i, 0); - } - - printk(KERN_INFO "%s: Guests: %*ph\n", - ZR_DEVNAME(zr), 8, guest); - } -} - -void -detect_guest_activity (struct zoran *zr) -{ - int timeout, i, j, res, guest[8], guest0[8], change[8][3]; - ktime_t t0, t1; - - dump_guests(zr); - printk(KERN_INFO "%s: Detecting guests activity, please wait...\n", - ZR_DEVNAME(zr)); - for (i = 1; i < 8; i++) { // Don't read jpeg codec here - guest0[i] = guest[i] = post_office_read(zr, i, 0); - } - - timeout = 0; - j = 0; - t0 = ktime_get(); - while (timeout < 10000) { - udelay(10); - timeout++; - for (i = 1; (i < 8) && (j < 8); i++) { - res = post_office_read(zr, i, 0); - if (res != guest[i]) { - t1 = ktime_get(); - change[j][0] = ktime_to_us(ktime_sub(t1, t0)); - t0 = t1; - change[j][1] = i; - change[j][2] = res; - j++; - guest[i] = res; - } - } - if (j >= 8) - break; - } - - printk(KERN_INFO "%s: Guests: %*ph\n", ZR_DEVNAME(zr), 8, guest0); - - if (j == 0) { - printk(KERN_INFO "%s: No activity detected.\n", ZR_DEVNAME(zr)); - return; - } - for (i = 0; i < j; i++) { - printk(KERN_INFO "%s: %6d: %d => 0x%02x\n", ZR_DEVNAME(zr), - change[i][0], change[i][1], change[i][2]); - } -} - -/* - * JPEG Codec access - */ - -void -jpeg_codec_sleep (struct zoran *zr, - int sleep) -{ - GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_SLEEP], !sleep); - if (!sleep) { - dprintk(3, - KERN_DEBUG - "%s: jpeg_codec_sleep() - wake GPIO=0x%08x\n", - ZR_DEVNAME(zr), btread(ZR36057_GPPGCR1)); - udelay(500); - } else { - dprintk(3, - KERN_DEBUG - "%s: jpeg_codec_sleep() - sleep GPIO=0x%08x\n", - ZR_DEVNAME(zr), btread(ZR36057_GPPGCR1)); - udelay(2); - } -} - -int -jpeg_codec_reset (struct zoran *zr) -{ - /* Take the codec out of sleep */ - jpeg_codec_sleep(zr, 0); - - if (zr->card.gpcs[GPCS_JPEG_RESET] != 0xff) { - post_office_write(zr, zr->card.gpcs[GPCS_JPEG_RESET], 0, - 0); - udelay(2); - } else { - GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_RESET], 0); - udelay(2); - GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_RESET], 1); - udelay(2); - } - - return 0; -} - -/* - * Set the registers for the size we have specified. Don't bother - * trying to understand this without the ZR36057 manual in front of - * you [AC]. - * - * PS: The manual is free for download in .pdf format from - * www.zoran.com - nicely done those folks. - */ - -static void -zr36057_adjust_vfe (struct zoran *zr, - enum zoran_codec_mode mode) -{ - u32 reg; - - switch (mode) { - case BUZ_MODE_MOTION_DECOMPRESS: - btand(~ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR); - reg = btread(ZR36057_VFEHCR); - if ((reg & (1 << 10)) && zr->card.type != LML33R10) { - reg += ((1 << 10) | 1); - } - btwrite(reg, ZR36057_VFEHCR); - break; - case BUZ_MODE_MOTION_COMPRESS: - case BUZ_MODE_IDLE: - default: - if ((zr->norm & V4L2_STD_NTSC) || - (zr->card.type == LML33R10 && - (zr->norm & V4L2_STD_PAL))) - btand(~ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR); - else - btor(ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR); - reg = btread(ZR36057_VFEHCR); - if (!(reg & (1 << 10)) && zr->card.type != LML33R10) { - reg -= ((1 << 10) | 1); - } - btwrite(reg, ZR36057_VFEHCR); - break; - } -} - -/* - * set geometry - */ - -static void -zr36057_set_vfe (struct zoran *zr, - int video_width, - int video_height, - const struct zoran_format *format) -{ - struct tvnorm *tvn; - unsigned HStart, HEnd, VStart, VEnd; - unsigned DispMode; - unsigned VidWinWid, VidWinHt; - unsigned hcrop1, hcrop2, vcrop1, vcrop2; - unsigned Wa, We, Ha, He; - unsigned X, Y, HorDcm, VerDcm; - u32 reg; - unsigned mask_line_size; - - tvn = zr->timing; - - Wa = tvn->Wa; - Ha = tvn->Ha; - - dprintk(2, KERN_INFO "%s: set_vfe() - width = %d, height = %d\n", - ZR_DEVNAME(zr), video_width, video_height); - - if (video_width < BUZ_MIN_WIDTH || - video_height < BUZ_MIN_HEIGHT || - video_width > Wa || video_height > Ha) { - dprintk(1, KERN_ERR "%s: set_vfe: w=%d h=%d not valid\n", - ZR_DEVNAME(zr), video_width, video_height); - return; - } - - /**** zr36057 ****/ - - /* horizontal */ - VidWinWid = video_width; - X = DIV_ROUND_UP(VidWinWid * 64, tvn->Wa); - We = (VidWinWid * 64) / X; - HorDcm = 64 - X; - hcrop1 = 2 * ((tvn->Wa - We) / 4); - hcrop2 = tvn->Wa - We - hcrop1; - HStart = tvn->HStart ? tvn->HStart : 1; - /* (Ronald) Original comment: - * "| 1 Doesn't have any effect, tested on both a DC10 and a DC10+" - * this is false. It inverses chroma values on the LML33R10 (so Cr - * suddenly is shown as Cb and reverse, really cool effect if you - * want to see blue faces, not useful otherwise). So don't use |1. - * However, the DC10 has '0' as HStart, but does need |1, so we - * use a dirty check... - */ - HEnd = HStart + tvn->Wa - 1; - HStart += hcrop1; - HEnd -= hcrop2; - reg = ((HStart & ZR36057_VFEHCR_Hmask) << ZR36057_VFEHCR_HStart) - | ((HEnd & ZR36057_VFEHCR_Hmask) << ZR36057_VFEHCR_HEnd); - if (zr->card.vfe_pol.hsync_pol) - reg |= ZR36057_VFEHCR_HSPol; - btwrite(reg, ZR36057_VFEHCR); - - /* Vertical */ - DispMode = !(video_height > BUZ_MAX_HEIGHT / 2); - VidWinHt = DispMode ? video_height : video_height / 2; - Y = DIV_ROUND_UP(VidWinHt * 64 * 2, tvn->Ha); - He = (VidWinHt * 64) / Y; - VerDcm = 64 - Y; - vcrop1 = (tvn->Ha / 2 - He) / 2; - vcrop2 = tvn->Ha / 2 - He - vcrop1; - VStart = tvn->VStart; - VEnd = VStart + tvn->Ha / 2; // - 1; FIXME SnapShot times out with -1 in 768*576 on the DC10 - LP - VStart += vcrop1; - VEnd -= vcrop2; - reg = ((VStart & ZR36057_VFEVCR_Vmask) << ZR36057_VFEVCR_VStart) - | ((VEnd & ZR36057_VFEVCR_Vmask) << ZR36057_VFEVCR_VEnd); - if (zr->card.vfe_pol.vsync_pol) - reg |= ZR36057_VFEVCR_VSPol; - btwrite(reg, ZR36057_VFEVCR); - - /* scaler and pixel format */ - reg = 0; - reg |= (HorDcm << ZR36057_VFESPFR_HorDcm); - reg |= (VerDcm << ZR36057_VFESPFR_VerDcm); - reg |= (DispMode << ZR36057_VFESPFR_DispMode); - /* RJ: I don't know, why the following has to be the opposite - * of the corresponding ZR36060 setting, but only this way - * we get the correct colors when uncompressing to the screen */ - //reg |= ZR36057_VFESPFR_VCLKPol; /**/ - /* RJ: Don't know if that is needed for NTSC also */ - if (!(zr->norm & V4L2_STD_NTSC)) - reg |= ZR36057_VFESPFR_ExtFl; // NEEDED!!!!!!! Wolfgang - reg |= ZR36057_VFESPFR_TopField; - if (HorDcm >= 48) { - reg |= 3 << ZR36057_VFESPFR_HFilter; /* 5 tap filter */ - } else if (HorDcm >= 32) { - reg |= 2 << ZR36057_VFESPFR_HFilter; /* 4 tap filter */ - } else if (HorDcm >= 16) { - reg |= 1 << ZR36057_VFESPFR_HFilter; /* 3 tap filter */ - } - reg |= format->vfespfr; - btwrite(reg, ZR36057_VFESPFR); - - /* display configuration */ - reg = (16 << ZR36057_VDCR_MinPix) - | (VidWinHt << ZR36057_VDCR_VidWinHt) - | (VidWinWid << ZR36057_VDCR_VidWinWid); - if (pci_pci_problems & PCIPCI_TRITON) - // || zr->revision < 1) // Revision 1 has also Triton support - reg &= ~ZR36057_VDCR_Triton; - else - reg |= ZR36057_VDCR_Triton; - btwrite(reg, ZR36057_VDCR); - - /* (Ronald) don't write this if overlay_mask = NULL */ - if (zr->overlay_mask) { - /* Write overlay clipping mask data, but don't enable overlay clipping */ - /* RJ: since this makes only sense on the screen, we use - * zr->overlay_settings.width instead of video_width */ - - mask_line_size = (BUZ_MAX_WIDTH + 31) / 32; - reg = virt_to_bus(zr->overlay_mask); - btwrite(reg, ZR36057_MMTR); - reg = virt_to_bus(zr->overlay_mask + mask_line_size); - btwrite(reg, ZR36057_MMBR); - reg = - mask_line_size - (zr->overlay_settings.width + - 31) / 32; - if (DispMode == 0) - reg += mask_line_size; - reg <<= ZR36057_OCR_MaskStride; - btwrite(reg, ZR36057_OCR); - } - - zr36057_adjust_vfe(zr, zr->codec_mode); -} - -/* - * Switch overlay on or off - */ - -void -zr36057_overlay (struct zoran *zr, - int on) -{ - u32 reg; - - if (on) { - /* do the necessary settings ... */ - btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR); /* switch it off first */ - - zr36057_set_vfe(zr, - zr->overlay_settings.width, - zr->overlay_settings.height, - zr->overlay_settings.format); - - /* Start and length of each line MUST be 4-byte aligned. - * This should be already checked before the call to this routine. - * All error messages are internal driver checking only! */ - - /* video display top and bottom registers */ - reg = (long) zr->vbuf_base + - zr->overlay_settings.x * - ((zr->overlay_settings.format->depth + 7) / 8) + - zr->overlay_settings.y * - zr->vbuf_bytesperline; - btwrite(reg, ZR36057_VDTR); - if (reg & 3) - dprintk(1, - KERN_ERR - "%s: zr36057_overlay() - video_address not aligned\n", - ZR_DEVNAME(zr)); - if (zr->overlay_settings.height > BUZ_MAX_HEIGHT / 2) - reg += zr->vbuf_bytesperline; - btwrite(reg, ZR36057_VDBR); - - /* video stride, status, and frame grab register */ - reg = zr->vbuf_bytesperline - - zr->overlay_settings.width * - ((zr->overlay_settings.format->depth + 7) / 8); - if (zr->overlay_settings.height > BUZ_MAX_HEIGHT / 2) - reg += zr->vbuf_bytesperline; - if (reg & 3) - dprintk(1, - KERN_ERR - "%s: zr36057_overlay() - video_stride not aligned\n", - ZR_DEVNAME(zr)); - reg = (reg << ZR36057_VSSFGR_DispStride); - reg |= ZR36057_VSSFGR_VidOvf; /* clear overflow status */ - btwrite(reg, ZR36057_VSSFGR); - - /* Set overlay clipping */ - if (zr->overlay_settings.clipcount > 0) - btor(ZR36057_OCR_OvlEnable, ZR36057_OCR); - - /* ... and switch it on */ - btor(ZR36057_VDCR_VidEn, ZR36057_VDCR); - } else { - /* Switch it off */ - btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR); - } -} - -/* - * The overlay mask has one bit for each pixel on a scan line, - * and the maximum window size is BUZ_MAX_WIDTH * BUZ_MAX_HEIGHT pixels. - */ - -void write_overlay_mask(struct zoran_fh *fh, struct v4l2_clip *vp, int count) -{ - struct zoran *zr = fh->zr; - unsigned mask_line_size = (BUZ_MAX_WIDTH + 31) / 32; - u32 *mask; - int x, y, width, height; - unsigned i, j, k; - - /* fill mask with one bits */ - memset(fh->overlay_mask, ~0, mask_line_size * 4 * BUZ_MAX_HEIGHT); - - for (i = 0; i < count; ++i) { - /* pick up local copy of clip */ - x = vp[i].c.left; - y = vp[i].c.top; - width = vp[i].c.width; - height = vp[i].c.height; - - /* trim clips that extend beyond the window */ - if (x < 0) { - width += x; - x = 0; - } - if (y < 0) { - height += y; - y = 0; - } - if (x + width > fh->overlay_settings.width) { - width = fh->overlay_settings.width - x; - } - if (y + height > fh->overlay_settings.height) { - height = fh->overlay_settings.height - y; - } - - /* ignore degenerate clips */ - if (height <= 0) { - continue; - } - if (width <= 0) { - continue; - } - - /* apply clip for each scan line */ - for (j = 0; j < height; ++j) { - /* reset bit for each pixel */ - /* this can be optimized later if need be */ - mask = fh->overlay_mask + (y + j) * mask_line_size; - for (k = 0; k < width; ++k) { - mask[(x + k) / 32] &= - ~((u32) 1 << (x + k) % 32); - } - } - } -} - -/* Enable/Disable uncompressed memory grabbing of the 36057 */ - -void -zr36057_set_memgrab (struct zoran *zr, - int mode) -{ - if (mode) { - /* We only check SnapShot and not FrameGrab here. SnapShot==1 - * means a capture is already in progress, but FrameGrab==1 - * doesn't necessary mean that. It's more correct to say a 1 - * to 0 transition indicates a capture completed. If a - * capture is pending when capturing is tuned off, FrameGrab - * will be stuck at 1 until capturing is turned back on. - */ - if (btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_SnapShot) - dprintk(1, - KERN_WARNING - "%s: zr36057_set_memgrab(1) with SnapShot on!?\n", - ZR_DEVNAME(zr)); - - /* switch on VSync interrupts */ - btwrite(IRQ_MASK, ZR36057_ISR); // Clear Interrupts - btor(zr->card.vsync_int, ZR36057_ICR); // SW - - /* enable SnapShot */ - btor(ZR36057_VSSFGR_SnapShot, ZR36057_VSSFGR); - - /* Set zr36057 video front end and enable video */ - zr36057_set_vfe(zr, zr->v4l_settings.width, - zr->v4l_settings.height, - zr->v4l_settings.format); - - zr->v4l_memgrab_active = 1; - } else { - /* switch off VSync interrupts */ - btand(~zr->card.vsync_int, ZR36057_ICR); // SW - - zr->v4l_memgrab_active = 0; - zr->v4l_grab_frame = NO_GRAB_ACTIVE; - - /* reenable grabbing to screen if it was running */ - if (zr->v4l_overlay_active) { - zr36057_overlay(zr, 1); - } else { - btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR); - btand(~ZR36057_VSSFGR_SnapShot, ZR36057_VSSFGR); - } - } -} - -int -wait_grab_pending (struct zoran *zr) -{ - unsigned long flags; - - /* wait until all pending grabs are finished */ - - if (!zr->v4l_memgrab_active) - return 0; - - wait_event_interruptible(zr->v4l_capq, - (zr->v4l_pend_tail == zr->v4l_pend_head)); - if (signal_pending(current)) - return -ERESTARTSYS; - - spin_lock_irqsave(&zr->spinlock, flags); - zr36057_set_memgrab(zr, 0); - spin_unlock_irqrestore(&zr->spinlock, flags); - - return 0; -} - -/***************************************************************************** - * * - * Set up the Buz-specific MJPEG part * - * * - *****************************************************************************/ - -static inline void -set_frame (struct zoran *zr, - int val) -{ - GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_FRAME], val); -} - -static void -set_videobus_dir (struct zoran *zr, - int val) -{ - switch (zr->card.type) { - case LML33: - case LML33R10: - if (!lml33dpath) - GPIO(zr, 5, val); - else - GPIO(zr, 5, 1); - break; - default: - GPIO(zr, zr->card.gpio[ZR_GPIO_VID_DIR], - zr->card.gpio_pol[ZR_GPIO_VID_DIR] ? !val : val); - break; - } -} - -static void -init_jpeg_queue (struct zoran *zr) -{ - int i; - - /* re-initialize DMA ring stuff */ - zr->jpg_que_head = 0; - zr->jpg_dma_head = 0; - zr->jpg_dma_tail = 0; - zr->jpg_que_tail = 0; - zr->jpg_seq_num = 0; - zr->JPEG_error = 0; - zr->num_errors = 0; - zr->jpg_err_seq = 0; - zr->jpg_err_shift = 0; - zr->jpg_queued_num = 0; - for (i = 0; i < zr->jpg_buffers.num_buffers; i++) { - zr->jpg_buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */ - } - for (i = 0; i < BUZ_NUM_STAT_COM; i++) { - zr->stat_com[i] = cpu_to_le32(1); /* mark as unavailable to zr36057 */ - } -} - -static void -zr36057_set_jpg (struct zoran *zr, - enum zoran_codec_mode mode) -{ - struct tvnorm *tvn; - u32 reg; - - tvn = zr->timing; - - /* assert P_Reset, disable code transfer, deassert Active */ - btwrite(0, ZR36057_JPC); - - /* MJPEG compression mode */ - switch (mode) { - - case BUZ_MODE_MOTION_COMPRESS: - default: - reg = ZR36057_JMC_MJPGCmpMode; - break; - - case BUZ_MODE_MOTION_DECOMPRESS: - reg = ZR36057_JMC_MJPGExpMode; - reg |= ZR36057_JMC_SyncMstr; - /* RJ: The following is experimental - improves the output to screen */ - //if(zr->jpg_settings.VFIFO_FB) reg |= ZR36057_JMC_VFIFO_FB; // No, it doesn't. SM - break; - - case BUZ_MODE_STILL_COMPRESS: - reg = ZR36057_JMC_JPGCmpMode; - break; - - case BUZ_MODE_STILL_DECOMPRESS: - reg = ZR36057_JMC_JPGExpMode; - break; - - } - reg |= ZR36057_JMC_JPG; - if (zr->jpg_settings.field_per_buff == 1) - reg |= ZR36057_JMC_Fld_per_buff; - btwrite(reg, ZR36057_JMC); - - /* vertical */ - btor(ZR36057_VFEVCR_VSPol, ZR36057_VFEVCR); - reg = (6 << ZR36057_VSP_VsyncSize) | - (tvn->Ht << ZR36057_VSP_FrmTot); - btwrite(reg, ZR36057_VSP); - reg = ((zr->jpg_settings.img_y + tvn->VStart) << ZR36057_FVAP_NAY) | - (zr->jpg_settings.img_height << ZR36057_FVAP_PAY); - btwrite(reg, ZR36057_FVAP); - - /* horizontal */ - if (zr->card.vfe_pol.hsync_pol) - btor(ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR); - else - btand(~ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR); - reg = ((tvn->HSyncStart) << ZR36057_HSP_HsyncStart) | - (tvn->Wt << ZR36057_HSP_LineTot); - btwrite(reg, ZR36057_HSP); - reg = ((zr->jpg_settings.img_x + - tvn->HStart + 4) << ZR36057_FHAP_NAX) | - (zr->jpg_settings.img_width << ZR36057_FHAP_PAX); - btwrite(reg, ZR36057_FHAP); - - /* field process parameters */ - if (zr->jpg_settings.odd_even) - reg = ZR36057_FPP_Odd_Even; - else - reg = 0; - - btwrite(reg, ZR36057_FPP); - - /* Set proper VCLK Polarity, else colors will be wrong during playback */ - //btor(ZR36057_VFESPFR_VCLKPol, ZR36057_VFESPFR); - - /* code base address */ - reg = virt_to_bus(zr->stat_com); - btwrite(reg, ZR36057_JCBA); - - /* FIFO threshold (FIFO is 160. double words) */ - /* NOTE: decimal values here */ - switch (mode) { - - case BUZ_MODE_STILL_COMPRESS: - case BUZ_MODE_MOTION_COMPRESS: - if (zr->card.type != BUZ) - reg = 140; - else - reg = 60; - break; - - case BUZ_MODE_STILL_DECOMPRESS: - case BUZ_MODE_MOTION_DECOMPRESS: - reg = 20; - break; - - default: - reg = 80; - break; - - } - btwrite(reg, ZR36057_JCFT); - zr36057_adjust_vfe(zr, mode); - -} - -void -print_interrupts (struct zoran *zr) -{ - int res, noerr = 0; - - printk(KERN_INFO "%s: interrupts received:", ZR_DEVNAME(zr)); - if ((res = zr->field_counter) < -1 || res > 1) { - printk(KERN_CONT " FD:%d", res); - } - if ((res = zr->intr_counter_GIRQ1) != 0) { - printk(KERN_CONT " GIRQ1:%d", res); - noerr++; - } - if ((res = zr->intr_counter_GIRQ0) != 0) { - printk(KERN_CONT " GIRQ0:%d", res); - noerr++; - } - if ((res = zr->intr_counter_CodRepIRQ) != 0) { - printk(KERN_CONT " CodRepIRQ:%d", res); - noerr++; - } - if ((res = zr->intr_counter_JPEGRepIRQ) != 0) { - printk(KERN_CONT " JPEGRepIRQ:%d", res); - noerr++; - } - if (zr->JPEG_max_missed) { - printk(KERN_CONT " JPEG delays: max=%d min=%d", zr->JPEG_max_missed, - zr->JPEG_min_missed); - } - if (zr->END_event_missed) { - printk(KERN_CONT " ENDs missed: %d", zr->END_event_missed); - } - //if (zr->jpg_queued_num) { - printk(KERN_CONT " queue_state=%ld/%ld/%ld/%ld", zr->jpg_que_tail, - zr->jpg_dma_tail, zr->jpg_dma_head, zr->jpg_que_head); - //} - if (!noerr) { - printk(KERN_CONT ": no interrupts detected."); - } - printk(KERN_CONT "\n"); -} - -void -clear_interrupt_counters (struct zoran *zr) -{ - zr->intr_counter_GIRQ1 = 0; - zr->intr_counter_GIRQ0 = 0; - zr->intr_counter_CodRepIRQ = 0; - zr->intr_counter_JPEGRepIRQ = 0; - zr->field_counter = 0; - zr->IRQ1_in = 0; - zr->IRQ1_out = 0; - zr->JPEG_in = 0; - zr->JPEG_out = 0; - zr->JPEG_0 = 0; - zr->JPEG_1 = 0; - zr->END_event_missed = 0; - zr->JPEG_missed = 0; - zr->JPEG_max_missed = 0; - zr->JPEG_min_missed = 0x7fffffff; -} - -static u32 -count_reset_interrupt (struct zoran *zr) -{ - u32 isr; - - if ((isr = btread(ZR36057_ISR) & 0x78000000)) { - if (isr & ZR36057_ISR_GIRQ1) { - btwrite(ZR36057_ISR_GIRQ1, ZR36057_ISR); - zr->intr_counter_GIRQ1++; - } - if (isr & ZR36057_ISR_GIRQ0) { - btwrite(ZR36057_ISR_GIRQ0, ZR36057_ISR); - zr->intr_counter_GIRQ0++; - } - if (isr & ZR36057_ISR_CodRepIRQ) { - btwrite(ZR36057_ISR_CodRepIRQ, ZR36057_ISR); - zr->intr_counter_CodRepIRQ++; - } - if (isr & ZR36057_ISR_JPEGRepIRQ) { - btwrite(ZR36057_ISR_JPEGRepIRQ, ZR36057_ISR); - zr->intr_counter_JPEGRepIRQ++; - } - } - return isr; -} - -void -jpeg_start (struct zoran *zr) -{ - int reg; - - zr->frame_num = 0; - - /* deassert P_reset, disable code transfer, deassert Active */ - btwrite(ZR36057_JPC_P_Reset, ZR36057_JPC); - /* stop flushing the internal code buffer */ - btand(~ZR36057_MCTCR_CFlush, ZR36057_MCTCR); - /* enable code transfer */ - btor(ZR36057_JPC_CodTrnsEn, ZR36057_JPC); - - /* clear IRQs */ - btwrite(IRQ_MASK, ZR36057_ISR); - /* enable the JPEG IRQs */ - btwrite(zr->card.jpeg_int | - ZR36057_ICR_JPEGRepIRQ | - ZR36057_ICR_IntPinEn, - ZR36057_ICR); - - set_frame(zr, 0); // \FRAME - - /* set the JPEG codec guest ID */ - reg = (zr->card.gpcs[1] << ZR36057_JCGI_JPEGuestID) | - (0 << ZR36057_JCGI_JPEGuestReg); - btwrite(reg, ZR36057_JCGI); - - if (zr->card.video_vfe == CODEC_TYPE_ZR36016 && - zr->card.video_codec == CODEC_TYPE_ZR36050) { - /* Enable processing on the ZR36016 */ - if (zr->vfe) - zr36016_write(zr->vfe, 0, 1); - - /* load the address of the GO register in the ZR36050 latch */ - post_office_write(zr, 0, 0, 0); - } - - /* assert Active */ - btor(ZR36057_JPC_Active, ZR36057_JPC); - - /* enable the Go generation */ - btor(ZR36057_JMC_Go_en, ZR36057_JMC); - udelay(30); - - set_frame(zr, 1); // /FRAME - - dprintk(3, KERN_DEBUG "%s: jpeg_start\n", ZR_DEVNAME(zr)); -} - -void -zr36057_enable_jpg (struct zoran *zr, - enum zoran_codec_mode mode) -{ - struct vfe_settings cap; - int field_size = - zr->jpg_buffers.buffer_size / zr->jpg_settings.field_per_buff; - - zr->codec_mode = mode; - - cap.x = zr->jpg_settings.img_x; - cap.y = zr->jpg_settings.img_y; - cap.width = zr->jpg_settings.img_width; - cap.height = zr->jpg_settings.img_height; - cap.decimation = - zr->jpg_settings.HorDcm | (zr->jpg_settings.VerDcm << 8); - cap.quality = zr->jpg_settings.jpg_comp.quality; - - switch (mode) { - - case BUZ_MODE_MOTION_COMPRESS: { - struct jpeg_app_marker app; - struct jpeg_com_marker com; - - /* In motion compress mode, the decoder output must be enabled, and - * the video bus direction set to input. - */ - set_videobus_dir(zr, 0); - decoder_call(zr, video, s_stream, 1); - encoder_call(zr, video, s_routing, 0, 0, 0); - - /* Take the JPEG codec and the VFE out of sleep */ - jpeg_codec_sleep(zr, 0); - - /* set JPEG app/com marker */ - app.appn = zr->jpg_settings.jpg_comp.APPn; - app.len = zr->jpg_settings.jpg_comp.APP_len; - memcpy(app.data, zr->jpg_settings.jpg_comp.APP_data, 60); - zr->codec->control(zr->codec, CODEC_S_JPEG_APP_DATA, - sizeof(struct jpeg_app_marker), &app); - - com.len = zr->jpg_settings.jpg_comp.COM_len; - memcpy(com.data, zr->jpg_settings.jpg_comp.COM_data, 60); - zr->codec->control(zr->codec, CODEC_S_JPEG_COM_DATA, - sizeof(struct jpeg_com_marker), &com); - - /* Setup the JPEG codec */ - zr->codec->control(zr->codec, CODEC_S_JPEG_TDS_BYTE, - sizeof(int), &field_size); - zr->codec->set_video(zr->codec, zr->timing, &cap, - &zr->card.vfe_pol); - zr->codec->set_mode(zr->codec, CODEC_DO_COMPRESSION); - - /* Setup the VFE */ - if (zr->vfe) { - zr->vfe->control(zr->vfe, CODEC_S_JPEG_TDS_BYTE, - sizeof(int), &field_size); - zr->vfe->set_video(zr->vfe, zr->timing, &cap, - &zr->card.vfe_pol); - zr->vfe->set_mode(zr->vfe, CODEC_DO_COMPRESSION); - } - - init_jpeg_queue(zr); - zr36057_set_jpg(zr, mode); // \P_Reset, ... Video param, FIFO - - clear_interrupt_counters(zr); - dprintk(2, KERN_INFO "%s: enable_jpg(MOTION_COMPRESS)\n", - ZR_DEVNAME(zr)); - break; - } - - case BUZ_MODE_MOTION_DECOMPRESS: - /* In motion decompression mode, the decoder output must be disabled, and - * the video bus direction set to output. - */ - decoder_call(zr, video, s_stream, 0); - set_videobus_dir(zr, 1); - encoder_call(zr, video, s_routing, 1, 0, 0); - - /* Take the JPEG codec and the VFE out of sleep */ - jpeg_codec_sleep(zr, 0); - /* Setup the VFE */ - if (zr->vfe) { - zr->vfe->set_video(zr->vfe, zr->timing, &cap, - &zr->card.vfe_pol); - zr->vfe->set_mode(zr->vfe, CODEC_DO_EXPANSION); - } - /* Setup the JPEG codec */ - zr->codec->set_video(zr->codec, zr->timing, &cap, - &zr->card.vfe_pol); - zr->codec->set_mode(zr->codec, CODEC_DO_EXPANSION); - - init_jpeg_queue(zr); - zr36057_set_jpg(zr, mode); // \P_Reset, ... Video param, FIFO - - clear_interrupt_counters(zr); - dprintk(2, KERN_INFO "%s: enable_jpg(MOTION_DECOMPRESS)\n", - ZR_DEVNAME(zr)); - break; - - case BUZ_MODE_IDLE: - default: - /* shut down processing */ - btand(~(zr->card.jpeg_int | ZR36057_ICR_JPEGRepIRQ), - ZR36057_ICR); - btwrite(zr->card.jpeg_int | ZR36057_ICR_JPEGRepIRQ, - ZR36057_ISR); - btand(~ZR36057_JMC_Go_en, ZR36057_JMC); // \Go_en - - msleep(50); - - set_videobus_dir(zr, 0); - set_frame(zr, 1); // /FRAME - btor(ZR36057_MCTCR_CFlush, ZR36057_MCTCR); // /CFlush - btwrite(0, ZR36057_JPC); // \P_Reset,\CodTrnsEn,\Active - btand(~ZR36057_JMC_VFIFO_FB, ZR36057_JMC); - btand(~ZR36057_JMC_SyncMstr, ZR36057_JMC); - jpeg_codec_reset(zr); - jpeg_codec_sleep(zr, 1); - zr36057_adjust_vfe(zr, mode); - - decoder_call(zr, video, s_stream, 1); - encoder_call(zr, video, s_routing, 0, 0, 0); - - dprintk(2, KERN_INFO "%s: enable_jpg(IDLE)\n", ZR_DEVNAME(zr)); - break; - - } -} - -/* when this is called the spinlock must be held */ -void -zoran_feed_stat_com (struct zoran *zr) -{ - /* move frames from pending queue to DMA */ - - int frame, i, max_stat_com; - - max_stat_com = - (zr->jpg_settings.TmpDcm == - 1) ? BUZ_NUM_STAT_COM : (BUZ_NUM_STAT_COM >> 1); - - while ((zr->jpg_dma_head - zr->jpg_dma_tail) < max_stat_com && - zr->jpg_dma_head < zr->jpg_que_head) { - - frame = zr->jpg_pend[zr->jpg_dma_head & BUZ_MASK_FRAME]; - if (zr->jpg_settings.TmpDcm == 1) { - /* fill 1 stat_com entry */ - i = (zr->jpg_dma_head - - zr->jpg_err_shift) & BUZ_MASK_STAT_COM; - if (!(zr->stat_com[i] & cpu_to_le32(1))) - break; - zr->stat_com[i] = - cpu_to_le32(zr->jpg_buffers.buffer[frame].jpg.frag_tab_bus); - } else { - /* fill 2 stat_com entries */ - i = ((zr->jpg_dma_head - - zr->jpg_err_shift) & 1) * 2; - if (!(zr->stat_com[i] & cpu_to_le32(1))) - break; - zr->stat_com[i] = - cpu_to_le32(zr->jpg_buffers.buffer[frame].jpg.frag_tab_bus); - zr->stat_com[i + 1] = - cpu_to_le32(zr->jpg_buffers.buffer[frame].jpg.frag_tab_bus); - } - zr->jpg_buffers.buffer[frame].state = BUZ_STATE_DMA; - zr->jpg_dma_head++; - - } - if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) - zr->jpg_queued_num++; -} - -/* when this is called the spinlock must be held */ -static void -zoran_reap_stat_com (struct zoran *zr) -{ - /* move frames from DMA queue to done queue */ - - int i; - u32 stat_com; - unsigned int seq; - unsigned int dif; - struct zoran_buffer *buffer; - int frame; - - /* In motion decompress we don't have a hardware frame counter, - * we just count the interrupts here */ - - if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) { - zr->jpg_seq_num++; - } - while (zr->jpg_dma_tail < zr->jpg_dma_head) { - if (zr->jpg_settings.TmpDcm == 1) - i = (zr->jpg_dma_tail - - zr->jpg_err_shift) & BUZ_MASK_STAT_COM; - else - i = ((zr->jpg_dma_tail - - zr->jpg_err_shift) & 1) * 2 + 1; - - stat_com = le32_to_cpu(zr->stat_com[i]); - - if ((stat_com & 1) == 0) { - return; - } - frame = zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME]; - buffer = &zr->jpg_buffers.buffer[frame]; - v4l2_get_timestamp(&buffer->bs.timestamp); - - if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) { - buffer->bs.length = (stat_com & 0x7fffff) >> 1; - - /* update sequence number with the help of the counter in stat_com */ - - seq = ((stat_com >> 24) + zr->jpg_err_seq) & 0xff; - dif = (seq - zr->jpg_seq_num) & 0xff; - zr->jpg_seq_num += dif; - } else { - buffer->bs.length = 0; - } - buffer->bs.seq = - zr->jpg_settings.TmpDcm == - 2 ? (zr->jpg_seq_num >> 1) : zr->jpg_seq_num; - buffer->state = BUZ_STATE_DONE; - - zr->jpg_dma_tail++; - } -} - -static void zoran_restart(struct zoran *zr) -{ - /* Now the stat_comm buffer is ready for restart */ - unsigned int status = 0; - int mode; - - if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) { - decoder_call(zr, video, g_input_status, &status); - mode = CODEC_DO_COMPRESSION; - } else { - status = V4L2_IN_ST_NO_SIGNAL; - mode = CODEC_DO_EXPANSION; - } - if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS || - !(status & V4L2_IN_ST_NO_SIGNAL)) { - /********** RESTART code *************/ - jpeg_codec_reset(zr); - zr->codec->set_mode(zr->codec, mode); - zr36057_set_jpg(zr, zr->codec_mode); - jpeg_start(zr); - - if (zr->num_errors <= 8) - dprintk(2, KERN_INFO "%s: Restart\n", - ZR_DEVNAME(zr)); - - zr->JPEG_missed = 0; - zr->JPEG_error = 2; - /********** End RESTART code ***********/ - } -} - -static void -error_handler (struct zoran *zr, - u32 astat, - u32 stat) -{ - int i; - - /* This is JPEG error handling part */ - if (zr->codec_mode != BUZ_MODE_MOTION_COMPRESS && - zr->codec_mode != BUZ_MODE_MOTION_DECOMPRESS) { - return; - } - - if ((stat & 1) == 0 && - zr->codec_mode == BUZ_MODE_MOTION_COMPRESS && - zr->jpg_dma_tail - zr->jpg_que_tail >= zr->jpg_buffers.num_buffers) { - /* No free buffers... */ - zoran_reap_stat_com(zr); - zoran_feed_stat_com(zr); - wake_up_interruptible(&zr->jpg_capq); - zr->JPEG_missed = 0; - return; - } - - if (zr->JPEG_error == 1) { - zoran_restart(zr); - return; - } - - /* - * First entry: error just happened during normal operation - * - * In BUZ_MODE_MOTION_COMPRESS: - * - * Possible glitch in TV signal. In this case we should - * stop the codec and wait for good quality signal before - * restarting it to avoid further problems - * - * In BUZ_MODE_MOTION_DECOMPRESS: - * - * Bad JPEG frame: we have to mark it as processed (codec crashed - * and was not able to do it itself), and to remove it from queue. - */ - btand(~ZR36057_JMC_Go_en, ZR36057_JMC); - udelay(1); - stat = stat | (post_office_read(zr, 7, 0) & 3) << 8; - btwrite(0, ZR36057_JPC); - btor(ZR36057_MCTCR_CFlush, ZR36057_MCTCR); - jpeg_codec_reset(zr); - jpeg_codec_sleep(zr, 1); - zr->JPEG_error = 1; - zr->num_errors++; - - /* Report error */ - if (zr36067_debug > 1 && zr->num_errors <= 8) { - long frame; - int j; - - frame = zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME]; - printk(KERN_ERR - "%s: JPEG error stat=0x%08x(0x%08x) queue_state=%ld/%ld/%ld/%ld seq=%ld frame=%ld. Codec stopped. ", - ZR_DEVNAME(zr), stat, zr->last_isr, - zr->jpg_que_tail, zr->jpg_dma_tail, - zr->jpg_dma_head, zr->jpg_que_head, - zr->jpg_seq_num, frame); - printk(KERN_INFO "stat_com frames:"); - for (j = 0; j < BUZ_NUM_STAT_COM; j++) { - for (i = 0; i < zr->jpg_buffers.num_buffers; i++) { - if (le32_to_cpu(zr->stat_com[j]) == zr->jpg_buffers.buffer[i].jpg.frag_tab_bus) - printk(KERN_CONT "% d->%d", j, i); - } - } - printk(KERN_CONT "\n"); - } - /* Find an entry in stat_com and rotate contents */ - if (zr->jpg_settings.TmpDcm == 1) - i = (zr->jpg_dma_tail - zr->jpg_err_shift) & BUZ_MASK_STAT_COM; - else - i = ((zr->jpg_dma_tail - zr->jpg_err_shift) & 1) * 2; - if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) { - /* Mimic zr36067 operation */ - zr->stat_com[i] |= cpu_to_le32(1); - if (zr->jpg_settings.TmpDcm != 1) - zr->stat_com[i + 1] |= cpu_to_le32(1); - /* Refill */ - zoran_reap_stat_com(zr); - zoran_feed_stat_com(zr); - wake_up_interruptible(&zr->jpg_capq); - /* Find an entry in stat_com again after refill */ - if (zr->jpg_settings.TmpDcm == 1) - i = (zr->jpg_dma_tail - zr->jpg_err_shift) & BUZ_MASK_STAT_COM; - else - i = ((zr->jpg_dma_tail - zr->jpg_err_shift) & 1) * 2; - } - if (i) { - /* Rotate stat_comm entries to make current entry first */ - int j; - __le32 bus_addr[BUZ_NUM_STAT_COM]; - - /* Here we are copying the stat_com array, which - * is already in little endian format, so - * no endian conversions here - */ - memcpy(bus_addr, zr->stat_com, sizeof(bus_addr)); - - for (j = 0; j < BUZ_NUM_STAT_COM; j++) - zr->stat_com[j] = bus_addr[(i + j) & BUZ_MASK_STAT_COM]; - - zr->jpg_err_shift += i; - zr->jpg_err_shift &= BUZ_MASK_STAT_COM; - } - if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) - zr->jpg_err_seq = zr->jpg_seq_num; /* + 1; */ - zoran_restart(zr); -} - -irqreturn_t -zoran_irq (int irq, - void *dev_id) -{ - u32 stat, astat; - int count; - struct zoran *zr; - unsigned long flags; - - zr = dev_id; - count = 0; - - if (zr->testing) { - /* Testing interrupts */ - spin_lock_irqsave(&zr->spinlock, flags); - while ((stat = count_reset_interrupt(zr))) { - if (count++ > 100) { - btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR); - dprintk(1, - KERN_ERR - "%s: IRQ lockup while testing, isr=0x%08x, cleared int mask\n", - ZR_DEVNAME(zr), stat); - wake_up_interruptible(&zr->test_q); - } - } - zr->last_isr = stat; - spin_unlock_irqrestore(&zr->spinlock, flags); - return IRQ_HANDLED; - } - - spin_lock_irqsave(&zr->spinlock, flags); - while (1) { - /* get/clear interrupt status bits */ - stat = count_reset_interrupt(zr); - astat = stat & IRQ_MASK; - if (!astat) { - break; - } - dprintk(4, - KERN_DEBUG - "zoran_irq: astat: 0x%08x, mask: 0x%08x\n", - astat, btread(ZR36057_ICR)); - if (astat & zr->card.vsync_int) { // SW - - if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS || - zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) { - /* count missed interrupts */ - zr->JPEG_missed++; - } - //post_office_read(zr,1,0); - /* Interrupts may still happen when - * zr->v4l_memgrab_active is switched off. - * We simply ignore them */ - - if (zr->v4l_memgrab_active) { - /* A lot more checks should be here ... */ - if ((btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_SnapShot) == 0) - dprintk(1, - KERN_WARNING - "%s: BuzIRQ with SnapShot off ???\n", - ZR_DEVNAME(zr)); - - if (zr->v4l_grab_frame != NO_GRAB_ACTIVE) { - /* There is a grab on a frame going on, check if it has finished */ - if ((btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_FrameGrab) == 0) { - /* it is finished, notify the user */ - - zr->v4l_buffers.buffer[zr->v4l_grab_frame].state = BUZ_STATE_DONE; - zr->v4l_buffers.buffer[zr->v4l_grab_frame].bs.seq = zr->v4l_grab_seq; - v4l2_get_timestamp(&zr->v4l_buffers.buffer[zr->v4l_grab_frame].bs.timestamp); - zr->v4l_grab_frame = NO_GRAB_ACTIVE; - zr->v4l_pend_tail++; - } - } - - if (zr->v4l_grab_frame == NO_GRAB_ACTIVE) - wake_up_interruptible(&zr->v4l_capq); - - /* Check if there is another grab queued */ - - if (zr->v4l_grab_frame == NO_GRAB_ACTIVE && - zr->v4l_pend_tail != zr->v4l_pend_head) { - int frame = zr->v4l_pend[zr->v4l_pend_tail & V4L_MASK_FRAME]; - u32 reg; - - zr->v4l_grab_frame = frame; - - /* Set zr36057 video front end and enable video */ - - /* Buffer address */ - - reg = zr->v4l_buffers.buffer[frame].v4l.fbuffer_bus; - btwrite(reg, ZR36057_VDTR); - if (zr->v4l_settings.height > BUZ_MAX_HEIGHT / 2) - reg += zr->v4l_settings.bytesperline; - btwrite(reg, ZR36057_VDBR); - - /* video stride, status, and frame grab register */ - reg = 0; - if (zr->v4l_settings.height > BUZ_MAX_HEIGHT / 2) - reg += zr->v4l_settings.bytesperline; - reg = (reg << ZR36057_VSSFGR_DispStride); - reg |= ZR36057_VSSFGR_VidOvf; - reg |= ZR36057_VSSFGR_SnapShot; - reg |= ZR36057_VSSFGR_FrameGrab; - btwrite(reg, ZR36057_VSSFGR); - - btor(ZR36057_VDCR_VidEn, - ZR36057_VDCR); - } - } - - /* even if we don't grab, we do want to increment - * the sequence counter to see lost frames */ - zr->v4l_grab_seq++; - } -#if (IRQ_MASK & ZR36057_ISR_CodRepIRQ) - if (astat & ZR36057_ISR_CodRepIRQ) { - zr->intr_counter_CodRepIRQ++; - IDEBUG(printk(KERN_DEBUG "%s: ZR36057_ISR_CodRepIRQ\n", - ZR_DEVNAME(zr))); - btand(~ZR36057_ICR_CodRepIRQ, ZR36057_ICR); - } -#endif /* (IRQ_MASK & ZR36057_ISR_CodRepIRQ) */ - -#if (IRQ_MASK & ZR36057_ISR_JPEGRepIRQ) - if ((astat & ZR36057_ISR_JPEGRepIRQ) && - (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS || - zr->codec_mode == BUZ_MODE_MOTION_COMPRESS)) { - if (zr36067_debug > 1 && (!zr->frame_num || zr->JPEG_error)) { - char sv[BUZ_NUM_STAT_COM + 1]; - int i; - - printk(KERN_INFO - "%s: first frame ready: state=0x%08x odd_even=%d field_per_buff=%d delay=%d\n", - ZR_DEVNAME(zr), stat, - zr->jpg_settings.odd_even, - zr->jpg_settings.field_per_buff, - zr->JPEG_missed); - - for (i = 0; i < BUZ_NUM_STAT_COM; i++) - sv[i] = le32_to_cpu(zr->stat_com[i]) & 1 ? '1' : '0'; - sv[BUZ_NUM_STAT_COM] = 0; - printk(KERN_INFO - "%s: stat_com=%s queue_state=%ld/%ld/%ld/%ld\n", - ZR_DEVNAME(zr), sv, - zr->jpg_que_tail, - zr->jpg_dma_tail, - zr->jpg_dma_head, - zr->jpg_que_head); - } else { - /* Get statistics */ - if (zr->JPEG_missed > zr->JPEG_max_missed) - zr->JPEG_max_missed = zr->JPEG_missed; - if (zr->JPEG_missed < zr->JPEG_min_missed) - zr->JPEG_min_missed = zr->JPEG_missed; - } - - if (zr36067_debug > 2 && zr->frame_num < 6) { - int i; - - printk(KERN_INFO "%s: seq=%ld stat_com:", - ZR_DEVNAME(zr), zr->jpg_seq_num); - for (i = 0; i < 4; i++) { - printk(KERN_CONT " %08x", - le32_to_cpu(zr->stat_com[i])); - } - printk(KERN_CONT "\n"); - } - zr->frame_num++; - zr->JPEG_missed = 0; - zr->JPEG_error = 0; - zoran_reap_stat_com(zr); - zoran_feed_stat_com(zr); - wake_up_interruptible(&zr->jpg_capq); - } -#endif /* (IRQ_MASK & ZR36057_ISR_JPEGRepIRQ) */ - - /* DATERR, too many fields missed, error processing */ - if ((astat & zr->card.jpeg_int) || - zr->JPEG_missed > 25 || - zr->JPEG_error == 1 || - ((zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) && - (zr->frame_num && (zr->JPEG_missed > zr->jpg_settings.field_per_buff)))) { - error_handler(zr, astat, stat); - } - - count++; - if (count > 10) { - dprintk(2, KERN_WARNING "%s: irq loop %d\n", - ZR_DEVNAME(zr), count); - if (count > 20) { - btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR); - dprintk(2, - KERN_ERR - "%s: IRQ lockup, cleared int mask\n", - ZR_DEVNAME(zr)); - break; - } - } - zr->last_isr = stat; - } - spin_unlock_irqrestore(&zr->spinlock, flags); - - return IRQ_HANDLED; -} - -void -zoran_set_pci_master (struct zoran *zr, - int set_master) -{ - if (set_master) { - pci_set_master(zr->pci_dev); - } else { - u16 command; - - pci_read_config_word(zr->pci_dev, PCI_COMMAND, &command); - command &= ~PCI_COMMAND_MASTER; - pci_write_config_word(zr->pci_dev, PCI_COMMAND, command); - } -} - -void -zoran_init_hardware (struct zoran *zr) -{ - /* Enable bus-mastering */ - zoran_set_pci_master(zr, 1); - - /* Initialize the board */ - if (zr->card.init) { - zr->card.init(zr); - } - - decoder_call(zr, core, init, 0); - decoder_call(zr, video, s_std, zr->norm); - decoder_call(zr, video, s_routing, - zr->card.input[zr->input].muxsel, 0, 0); - - encoder_call(zr, core, init, 0); - encoder_call(zr, video, s_std_output, zr->norm); - encoder_call(zr, video, s_routing, 0, 0, 0); - - /* toggle JPEG codec sleep to sync PLL */ - jpeg_codec_sleep(zr, 1); - jpeg_codec_sleep(zr, 0); - - /* - * set individual interrupt enables (without GIRQ1) - * but don't global enable until zoran_open() - */ - zr36057_init_vfe(zr); - - zr36057_enable_jpg(zr, BUZ_MODE_IDLE); - - btwrite(IRQ_MASK, ZR36057_ISR); // Clears interrupts -} - -void -zr36057_restart (struct zoran *zr) -{ - btwrite(0, ZR36057_SPGPPCR); - mdelay(1); - btor(ZR36057_SPGPPCR_SoftReset, ZR36057_SPGPPCR); - mdelay(1); - - /* assert P_Reset */ - btwrite(0, ZR36057_JPC); - /* set up GPIO direction - all output */ - btwrite(ZR36057_SPGPPCR_SoftReset | 0, ZR36057_SPGPPCR); - - /* set up GPIO pins and guest bus timing */ - btwrite((0x81 << 24) | 0x8888, ZR36057_GPPGCR1); -} - -/* - * initialize video front end - */ - -static void -zr36057_init_vfe (struct zoran *zr) -{ - u32 reg; - - reg = btread(ZR36057_VFESPFR); - reg |= ZR36057_VFESPFR_LittleEndian; - reg &= ~ZR36057_VFESPFR_VCLKPol; - reg |= ZR36057_VFESPFR_ExtFl; - reg |= ZR36057_VFESPFR_TopField; - btwrite(reg, ZR36057_VFESPFR); - reg = btread(ZR36057_VDCR); - if (pci_pci_problems & PCIPCI_TRITON) - // || zr->revision < 1) // Revision 1 has also Triton support - reg &= ~ZR36057_VDCR_Triton; - else - reg |= ZR36057_VDCR_Triton; - btwrite(reg, ZR36057_VDCR); -} |