diff options
Diffstat (limited to 'drivers/input')
| -rw-r--r-- | drivers/input/mouse/psmouse-base.c | 279 |
1 files changed, 124 insertions, 155 deletions
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 4e43e7e70edb..525de2e7c08b 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -129,7 +129,6 @@ struct psmouse_protocol { * psmouse_process_byte() analyzes the PS/2 data stream and reports * relevant events to the input module once full packet has arrived. */ - psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) { struct input_dev *dev = psmouse->dev; @@ -219,7 +218,6 @@ void psmouse_queue_work(struct psmouse *psmouse, struct delayed_work *work, /* * __psmouse_set_state() sets new psmouse state and resets all flags. */ - static inline void __psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state) { psmouse->state = new_state; @@ -228,13 +226,11 @@ static inline void __psmouse_set_state(struct psmouse *psmouse, enum psmouse_sta psmouse->last = jiffies; } - /* * psmouse_set_state() sets new psmouse state and resets all flags and * counters while holding serio lock so fighting with interrupt handler * is not a concern. */ - void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state) { serio_pause_rx(psmouse->ps2dev.serio); @@ -246,7 +242,6 @@ void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state) * psmouse_handle_byte() processes one byte of the input data stream * by calling corresponding protocol handler. */ - static int psmouse_handle_byte(struct psmouse *psmouse) { psmouse_ret_t rc = psmouse->protocol_handler(psmouse); @@ -289,7 +284,6 @@ static int psmouse_handle_byte(struct psmouse *psmouse) * psmouse_interrupt() handles incoming characters, either passing them * for normal processing or gathering them as command response. */ - static irqreturn_t psmouse_interrupt(struct serio *serio, unsigned char data, unsigned int flags) { @@ -332,9 +326,8 @@ static irqreturn_t psmouse_interrupt(struct serio *serio, } psmouse->packet[psmouse->pktcnt++] = data; -/* - * Check if this is a new device announcement (0xAA 0x00) - */ + + /* Check if this is a new device announcement (0xAA 0x00) */ if (unlikely(psmouse->packet[0] == PSMOUSE_RET_BAT && psmouse->pktcnt <= 2)) { if (psmouse->pktcnt == 1) { psmouse->last = jiffies; @@ -348,9 +341,8 @@ static irqreturn_t psmouse_interrupt(struct serio *serio, serio_reconnect(serio); goto out; } -/* - * Not a new device, try processing first byte normally - */ + + /* Not a new device, try processing first byte normally */ psmouse->pktcnt = 1; if (psmouse_handle_byte(psmouse)) goto out; @@ -358,9 +350,10 @@ static irqreturn_t psmouse_interrupt(struct serio *serio, psmouse->packet[psmouse->pktcnt++] = data; } -/* - * See if we need to force resync because mouse was idle for too long - */ + /* + * See if we need to force resync because mouse was idle for + * too long. + */ if (psmouse->state == PSMOUSE_ACTIVATED && psmouse->pktcnt == 1 && psmouse->resync_time && time_after(jiffies, psmouse->last + psmouse->resync_time * HZ)) { @@ -377,7 +370,6 @@ static irqreturn_t psmouse_interrupt(struct serio *serio, return IRQ_HANDLED; } - /* * psmouse_sliced_command() sends an extended PS/2 command to the mouse * using sliced syntax, understood by advanced devices, such as Logitech @@ -401,7 +393,6 @@ int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command) return 0; } - /* * psmouse_reset() resets the mouse into power-on state. */ @@ -421,7 +412,6 @@ int psmouse_reset(struct psmouse *psmouse) /* * Here we set the mouse resolution. */ - void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution) { static const unsigned char params[] = { 0, 1, 2, 2, 3 }; @@ -438,7 +428,6 @@ void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution) /* * Here we set the mouse report rate. */ - static void psmouse_set_rate(struct psmouse *psmouse, unsigned int rate) { static const unsigned char rates[] = { 200, 100, 80, 60, 40, 20, 10, 0 }; @@ -454,7 +443,6 @@ static void psmouse_set_rate(struct psmouse *psmouse, unsigned int rate) /* * Here we set the mouse scaling. */ - static void psmouse_set_scale(struct psmouse *psmouse, enum psmouse_scale scale) { ps2_command(&psmouse->ps2dev, NULL, @@ -465,7 +453,6 @@ static void psmouse_set_scale(struct psmouse *psmouse, enum psmouse_scale scale) /* * psmouse_poll() - default poll handler. Everyone except for ALPS uses it. */ - static int psmouse_poll(struct psmouse *psmouse) { return ps2_command(&psmouse->ps2dev, psmouse->packet, @@ -599,7 +586,7 @@ static int im_explorer_detect(struct psmouse *psmouse, bool set_properties) if (param[0] != 4) return -1; -/* Magic to enable horizontal scrolling on IntelliMouse 4.0 */ + /* Magic to enable horizontal scrolling on IntelliMouse 4.0 */ param[0] = 200; ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); param[0] = 80; @@ -669,10 +656,10 @@ static int ps2bare_detect(struct psmouse *psmouse, bool set_properties) if (!psmouse->name) psmouse->name = "Mouse"; -/* - * We have no way of figuring true number of buttons so let's - * assume that the device has 3. - */ + /* + * We have no way of figuring true number of buttons so let's + * assume that the device has 3. + */ __set_bit(BTN_MIDDLE, psmouse->dev->keybit); } @@ -700,7 +687,6 @@ static int cortron_detect(struct psmouse *psmouse, bool set_properties) * Apply default settings to the psmouse structure. Most of them will * be overridden by individual protocol initialization routines. */ - static void psmouse_apply_defaults(struct psmouse *psmouse) { struct input_dev *input_dev = psmouse->dev; @@ -753,13 +739,15 @@ static int psmouse_do_detect(int (*detect)(struct psmouse *psmouse, * psmouse_extensions() probes for any extensions to the basic PS/2 protocol * the mouse may have. */ - static int psmouse_extensions(struct psmouse *psmouse, unsigned int max_proto, bool set_properties) { bool synaptics_hardware = false; -/* Always check for focaltech, this is safe as it uses pnp-id matching */ + /* + * Always check for focaltech, this is safe as it uses pnp-id + * matching. + */ if (psmouse_do_detect(focaltech_detect, psmouse, set_properties) == 0) { if (max_proto > PSMOUSE_IMEX) { if (!set_properties || focaltech_init(psmouse) == 0) { @@ -777,10 +765,10 @@ static int psmouse_extensions(struct psmouse *psmouse, } } -/* - * We always check for lifebook because it does not disturb mouse - * (it only checks DMI information). - */ + /* + * We always check for LifeBook because it does not disturb mouse + * (it only checks DMI information). + */ if (psmouse_do_detect(lifebook_detect, psmouse, set_properties) == 0) { if (max_proto > PSMOUSE_IMEX) { if (!set_properties || lifebook_init(psmouse) == 0) @@ -795,53 +783,57 @@ static int psmouse_extensions(struct psmouse *psmouse, } } -/* - * Try Kensington ThinkingMouse (we try first, because synaptics probe - * upsets the thinkingmouse). - */ - + /* + * Try Kensington ThinkingMouse (we try first, because Synaptics + * probe upsets the ThinkingMouse). + */ if (max_proto > PSMOUSE_IMEX && psmouse_do_detect(thinking_detect, psmouse, set_properties) == 0) { return PSMOUSE_THINKPS; } -/* - * Try Synaptics TouchPad. Note that probing is done even if Synaptics protocol - * support is disabled in config - we need to know if it is synaptics so we - * can reset it properly after probing for intellimouse. - */ + /* + * Try Synaptics TouchPad. Note that probing is done even if + * Synaptics protocol support is disabled in config - we need to + * know if it is Synaptics so we can reset it properly after + * probing for IntelliMouse. + */ if (max_proto > PSMOUSE_PS2 && psmouse_do_detect(synaptics_detect, psmouse, set_properties) == 0) { synaptics_hardware = true; if (max_proto > PSMOUSE_IMEX) { -/* - * Try activating protocol, but check if support is enabled first, since - * we try detecting Synaptics even when protocol is disabled. - */ + /* + * Try activating protocol, but check if support is + * enabled first, since we try detecting Synaptics + * even when protocol is disabled. + */ if (IS_ENABLED(CONFIG_MOUSE_PS2_SYNAPTICS) && (!set_properties || synaptics_init(psmouse) == 0)) { return PSMOUSE_SYNAPTICS; } -/* - * Some Synaptics touchpads can emulate extended protocols (like IMPS/2). - * Unfortunately Logitech/Genius probes confuse some firmware versions so - * we'll have to skip them. - */ + /* + * Some Synaptics touchpads can emulate extended + * protocols (like IMPS/2). Unfortunately + * Logitech/Genius probes confuse some firmware + * versions so we'll have to skip them. + */ max_proto = PSMOUSE_IMEX; } -/* - * Make sure that touchpad is in relative mode, gestures (taps) are enabled - */ + + /* + * Make sure that touchpad is in relative mode, gestures + * (taps) are enabled. + */ synaptics_reset(psmouse); } -/* - * Try Cypress Trackpad. - * Must try it before Finger Sensing Pad because Finger Sensing Pad probe - * upsets some modules of Cypress Trackpads. - */ + /* + * Try Cypress Trackpad. We must try it before Finger Sensing Pad + * because Finger Sensing Pad probe upsets some modules of Cypress + * Trackpads. + */ if (max_proto > PSMOUSE_IMEX && cypress_detect(psmouse, set_properties) == 0) { if (IS_ENABLED(CONFIG_MOUSE_PS2_CYPRESS)) { @@ -859,45 +851,34 @@ static int psmouse_extensions(struct psmouse *psmouse, max_proto = PSMOUSE_IMEX; } -/* - * Try ALPS TouchPad - */ + /* Try ALPS TouchPad */ if (max_proto > PSMOUSE_IMEX) { ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); if (psmouse_do_detect(alps_detect, psmouse, set_properties) == 0) { if (!set_properties || alps_init(psmouse) == 0) return PSMOUSE_ALPS; -/* - * Init failed, try basic relative protocols - */ + + /* Init failed, try basic relative protocols */ max_proto = PSMOUSE_IMEX; } } -/* - * Try OLPC HGPK touchpad. - */ + /* Try OLPC HGPK touchpad */ if (max_proto > PSMOUSE_IMEX && psmouse_do_detect(hgpk_detect, psmouse, set_properties) == 0) { if (!set_properties || hgpk_init(psmouse) == 0) return PSMOUSE_HGPK; -/* - * Init failed, try basic relative protocols - */ + /* Init failed, try basic relative protocols */ max_proto = PSMOUSE_IMEX; } -/* - * Try Elantech touchpad. - */ + /* Try Elantech touchpad */ if (max_proto > PSMOUSE_IMEX && psmouse_do_detect(elantech_detect, psmouse, set_properties) == 0) { if (!set_properties || elantech_init(psmouse) == 0) return PSMOUSE_ELANTECH; -/* - * Init failed, try basic relative protocols - */ + /* Init failed, try basic relative protocols */ max_proto = PSMOUSE_IMEX; } @@ -919,27 +900,25 @@ static int psmouse_extensions(struct psmouse *psmouse, return PSMOUSE_TOUCHKIT_PS2; } -/* - * Try Finger Sensing Pad. We do it here because its probe upsets - * Trackpoint devices (causing TP_READ_ID command to time out). - */ + /* + * Try Finger Sensing Pad. We do it here because its probe upsets + * Trackpoint devices (causing TP_READ_ID command to time out). + */ if (max_proto > PSMOUSE_IMEX) { if (psmouse_do_detect(fsp_detect, psmouse, set_properties) == 0) { if (!set_properties || fsp_init(psmouse) == 0) return PSMOUSE_FSP; -/* - * Init failed, try basic relative protocols - */ + /* Init failed, try basic relative protocols */ max_proto = PSMOUSE_IMEX; } } -/* - * Reset to defaults in case the device got confused by extended - * protocol probes. Note that we follow up with full reset because - * some mice put themselves to sleep when they see PSMOUSE_RESET_DIS. - */ + /* + * Reset to defaults in case the device got confused by extended + * protocol probes. Note that we follow up with full reset because + * some mice put themselves to sleep when they see PSMOUSE_RESET_DIS. + */ ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); psmouse_reset(psmouse); @@ -955,19 +934,19 @@ static int psmouse_extensions(struct psmouse *psmouse, return PSMOUSE_IMPS; } -/* - * Okay, all failed, we have a standard mouse here. The number of the buttons - * is still a question, though. We assume 3. - */ + /* + * Okay, all failed, we have a standard mouse here. The number of + * the buttons is still a question, though. We assume 3. + */ psmouse_do_detect(ps2bare_detect, psmouse, set_properties); if (synaptics_hardware) { -/* - * We detected Synaptics hardware but it did not respond to IMPS/2 probes. - * We need to reset the touchpad because if there is a track point on the - * pass through port it could get disabled while probing for protocol - * extensions. - */ + /* + * We detected Synaptics hardware but it did not respond to + * IMPS/2 probes. We need to reset the touchpad because if + * there is a track point on the pass through port it could + * get disabled while probing for protocol extensions. + */ psmouse_reset(psmouse); } @@ -1167,19 +1146,17 @@ static const struct psmouse_protocol *psmouse_protocol_by_name(const char *name, /* * psmouse_probe() probes for a PS/2 mouse. */ - static int psmouse_probe(struct psmouse *psmouse) { struct ps2dev *ps2dev = &psmouse->ps2dev; unsigned char param[2]; -/* - * First, we check if it's a mouse. It should send 0x00 or 0x03 - * in case of an IntelliMouse in 4-byte mode or 0x04 for IM Explorer. - * Sunrex K8561 IR Keyboard/Mouse reports 0xff on second and subsequent - * ID queries, probably due to a firmware bug. - */ - + /* + * First, we check if it's a mouse. It should send 0x00 or 0x03 in + * case of an IntelliMouse in 4-byte mode or 0x04 for IM Explorer. + * Sunrex K8561 IR Keyboard/Mouse reports 0xff on second and + * subsequent ID queries, probably due to a firmware bug. + */ param[0] = 0xa5; if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETID)) return -1; @@ -1188,10 +1165,10 @@ static int psmouse_probe(struct psmouse *psmouse) param[0] != 0x04 && param[0] != 0xff) return -1; -/* - * Then we reset and disable the mouse so that it doesn't generate events. - */ - + /* + * Then we reset and disable the mouse so that it doesn't generate + * events. + */ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_DIS)) psmouse_warn(psmouse, "Failed to reset mouse on %s\n", ps2dev->serio->phys); @@ -1202,13 +1179,11 @@ static int psmouse_probe(struct psmouse *psmouse) /* * psmouse_initialize() initializes the mouse to a sane state. */ - static void psmouse_initialize(struct psmouse *psmouse) { -/* - * We set the mouse report rate, resolution and scaling. - */ - + /* + * We set the mouse report rate, resolution and scaling. + */ if (psmouse_max_proto != PSMOUSE_PS2) { psmouse->set_rate(psmouse, psmouse->rate); psmouse->set_resolution(psmouse, psmouse->resolution); @@ -1219,7 +1194,6 @@ static void psmouse_initialize(struct psmouse *psmouse) /* * psmouse_activate() enables the mouse so that we get motion reports from it. */ - int psmouse_activate(struct psmouse *psmouse) { if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE)) { @@ -1233,10 +1207,9 @@ int psmouse_activate(struct psmouse *psmouse) } /* - * psmouse_deactivate() puts the mouse into poll mode so that we don't get motion - * reports from it unless we explicitly request it. + * psmouse_deactivate() puts the mouse into poll mode so that we don't get + * motion reports from it unless we explicitly request it. */ - int psmouse_deactivate(struct psmouse *psmouse) { if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE)) { @@ -1249,11 +1222,9 @@ int psmouse_deactivate(struct psmouse *psmouse) return 0; } - /* * psmouse_resync() attempts to re-validate current protocol. */ - static void psmouse_resync(struct work_struct *work) { struct psmouse *parent = NULL, *psmouse = @@ -1273,16 +1244,16 @@ static void psmouse_resync(struct work_struct *work) psmouse_deactivate(parent); } -/* - * Some mice don't ACK commands sent while they are in the middle of - * transmitting motion packet. To avoid delay we use ps2_sendbyte() - * instead of ps2_command() which would wait for 200ms for an ACK - * that may never come. - * As an additional quirk ALPS touchpads may not only forget to ACK - * disable command but will stop reporting taps, so if we see that - * mouse at least once ACKs disable we will do full reconnect if ACK - * is missing. - */ + /* + * Some mice don't ACK commands sent while they are in the middle of + * transmitting motion packet. To avoid delay we use ps2_sendbyte() + * instead of ps2_command() which would wait for 200ms for an ACK + * that may never come. + * As an additional quirk ALPS touchpads may not only forget to ACK + * disable command but will stop reporting taps, so if we see that + * mouse at least once ACKs disable we will do full reconnect if ACK + * is missing. + */ psmouse->num_resyncs++; if (ps2_sendbyte(&psmouse->ps2dev, PSMOUSE_CMD_DISABLE, 20)) { @@ -1291,13 +1262,13 @@ static void psmouse_resync(struct work_struct *work) } else psmouse->acks_disable_command = true; -/* - * Poll the mouse. If it was reset the packet will be shorter than - * psmouse->pktsize and ps2_command will fail. We do not expect and - * do not handle scenario when mouse "upgrades" its protocol while - * disconnected since it would require additional delay. If we ever - * see a mouse that does it we'll adjust the code. - */ + /* + * Poll the mouse. If it was reset the packet will be shorter than + * psmouse->pktsize and ps2_command will fail. We do not expect and + * do not handle scenario when mouse "upgrades" its protocol while + * disconnected since it would require additional delay. If we ever + * see a mouse that does it we'll adjust the code. + */ if (!failed) { if (psmouse->poll(psmouse)) failed = true; @@ -1314,11 +1285,12 @@ static void psmouse_resync(struct work_struct *work) psmouse_set_state(psmouse, PSMOUSE_RESYNCING); } } -/* - * Now try to enable mouse. We try to do that even if poll failed and also - * repeat our attempts 5 times, otherwise we may be left out with disabled - * mouse. - */ + + /* + * Now try to enable mouse. We try to do that even if poll failed + * and also repeat our attempts 5 times, otherwise we may be left + * out with disabled mouse. + */ for (i = 0; i < 5; i++) { if (!ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE)) { enabled = true; @@ -1350,7 +1322,6 @@ static void psmouse_resync(struct work_struct *work) /* * psmouse_cleanup() resets the mouse into power-on state. */ - static void psmouse_cleanup(struct serio *serio) { struct psmouse *psmouse = serio_get_drvdata(serio); @@ -1375,15 +1346,15 @@ static void psmouse_cleanup(struct serio *serio) if (psmouse->cleanup) psmouse->cleanup(psmouse); -/* - * Reset the mouse to defaults (bare PS/2 protocol). - */ + /* + * Reset the mouse to defaults (bare PS/2 protocol). + */ ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); -/* - * Some boxes, such as HP nx7400, get terribly confused if mouse - * is not fully enabled before suspending/shutting down. - */ + /* + * Some boxes, such as HP nx7400, get terribly confused if mouse + * is not fully enabled before suspending/shutting down. + */ ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE); if (parent) { @@ -1399,7 +1370,6 @@ static void psmouse_cleanup(struct serio *serio) /* * psmouse_disconnect() closes and frees. */ - static void psmouse_disconnect(struct serio *serio) { struct psmouse *psmouse, *parent = NULL; @@ -1599,7 +1569,6 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv) goto out; } - static int psmouse_reconnect(struct serio *serio) { struct psmouse *psmouse = serio_get_drvdata(serio); |