diff options
Diffstat (limited to 'drivers/input/touchscreen/ads7846.c')
| -rw-r--r-- | drivers/input/touchscreen/ads7846.c | 48 |
1 files changed, 47 insertions, 1 deletions
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 52d2ca147d8f..532279cda0e4 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -27,6 +27,7 @@ #include <linux/gpio.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/regulator/consumer.h> #include <asm/irq.h> /* @@ -35,6 +36,7 @@ * TSC2046 is just newer ads7846 silicon. * Support for ads7843 tested on Atmel at91sam926x-EK. * Support for ads7845 has only been stubbed in. + * Support for Analog Devices AD7873 and AD7843 tested. * * IRQ handling needs a workaround because of a shortcoming in handling * edge triggered IRQs on some platforms like the OMAP1/2. These @@ -85,6 +87,7 @@ struct ads7846 { char name[32]; struct spi_device *spi; + struct regulator *reg; #if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE) struct attribute_group *attr_group; @@ -788,6 +791,8 @@ static void ads7846_disable(struct ads7846 *ts) } } + regulator_disable(ts->reg); + /* we know the chip's in lowpower mode since we always * leave it that way after every request */ @@ -799,6 +804,8 @@ static void ads7846_enable(struct ads7846 *ts) if (!ts->disabled) return; + regulator_enable(ts->reg); + ts->disabled = 0; ts->irq_disabled = 0; enable_irq(ts->spi->irq); @@ -815,6 +822,9 @@ static int ads7846_suspend(struct spi_device *spi, pm_message_t message) spin_unlock_irq(&ts->lock); + if (device_may_wakeup(&ts->spi->dev)) + enable_irq_wake(ts->spi->irq); + return 0; } @@ -823,6 +833,9 @@ static int ads7846_resume(struct spi_device *spi) { struct ads7846 *ts = dev_get_drvdata(&spi->dev); + if (device_may_wakeup(&ts->spi->dev)) + disable_irq_wake(ts->spi->irq); + spin_lock_irq(&ts->lock); ts->is_suspended = 0; @@ -978,6 +991,15 @@ static int __devinit ads7846_probe(struct spi_device *spi) vref = pdata->keep_vref_on; + if (ts->model == 7873) { + /* The AD7873 is almost identical to the ADS7846 + * keep VREF off during differential/ratiometric + * conversion modes + */ + ts->model = 7846; + vref = 0; + } + /* set up the transfers to read touchscreen state; this assumes we * use formula #2 for pressure, not #3. */ @@ -1139,6 +1161,19 @@ static int __devinit ads7846_probe(struct spi_device *spi) ts->last_msg = m; + ts->reg = regulator_get(&spi->dev, "vcc"); + if (IS_ERR(ts->reg)) { + dev_err(&spi->dev, "unable to get regulator: %ld\n", + PTR_ERR(ts->reg)); + goto err_free_gpio; + } + + err = regulator_enable(ts->reg); + if (err) { + dev_err(&spi->dev, "unable to enable regulator: %d\n", err); + goto err_put_regulator; + } + if (request_irq(spi->irq, ads7846_irq, IRQF_TRIGGER_FALLING, spi->dev.driver->name, ts)) { dev_info(&spi->dev, @@ -1148,7 +1183,7 @@ static int __devinit ads7846_probe(struct spi_device *spi) spi->dev.driver->name, ts); if (err) { dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); - goto err_free_gpio; + goto err_disable_regulator; } } @@ -1172,6 +1207,8 @@ static int __devinit ads7846_probe(struct spi_device *spi) if (err) goto err_remove_attr_group; + device_init_wakeup(&spi->dev, pdata->wakeup); + return 0; err_remove_attr_group: @@ -1180,6 +1217,10 @@ static int __devinit ads7846_probe(struct spi_device *spi) ads784x_hwmon_unregister(spi, ts); err_free_irq: free_irq(spi->irq, ts); + err_disable_regulator: + regulator_disable(ts->reg); + err_put_regulator: + regulator_put(ts->reg); err_free_gpio: if (ts->gpio_pendown != -1) gpio_free(ts->gpio_pendown); @@ -1197,6 +1238,8 @@ static int __devexit ads7846_remove(struct spi_device *spi) { struct ads7846 *ts = dev_get_drvdata(&spi->dev); + device_init_wakeup(&spi->dev, false); + ads784x_hwmon_unregister(spi, ts); input_unregister_device(ts->input); @@ -1208,6 +1251,9 @@ static int __devexit ads7846_remove(struct spi_device *spi) /* suspend left the IRQ disabled */ enable_irq(ts->spi->irq); + regulator_disable(ts->reg); + regulator_put(ts->reg); + if (ts->gpio_pendown != -1) gpio_free(ts->gpio_pendown); |