diff options
Diffstat (limited to 'drivers/input/mouse/cyapa.h')
| -rw-r--r-- | drivers/input/mouse/cyapa.h | 296 |
1 files changed, 296 insertions, 0 deletions
diff --git a/drivers/input/mouse/cyapa.h b/drivers/input/mouse/cyapa.h new file mode 100644 index 000000000000..aab19b7d9357 --- /dev/null +++ b/drivers/input/mouse/cyapa.h @@ -0,0 +1,296 @@ +/* + * Cypress APA trackpad with I2C interface + * + * Author: Dudley Du <dudl@cypress.com> + * + * Copyright (C) 2014 Cypress Semiconductor, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#ifndef _CYAPA_H +#define _CYAPA_H + +#include <linux/firmware.h> + +/* APA trackpad firmware generation number. */ +#define CYAPA_GEN_UNKNOWN 0x00 /* unknown protocol. */ +#define CYAPA_GEN3 0x03 /* support MT-protocol B with tracking ID. */ +#define CYAPA_GEN5 0x05 /* support TrueTouch GEN5 trackpad device. */ + +#define CYAPA_NAME "Cypress APA Trackpad (cyapa)" + +/* + * Macros for SMBus communication + */ +#define SMBUS_READ 0x01 +#define SMBUS_WRITE 0x00 +#define SMBUS_ENCODE_IDX(cmd, idx) ((cmd) | (((idx) & 0x03) << 1)) +#define SMBUS_ENCODE_RW(cmd, rw) ((cmd) | ((rw) & 0x01)) +#define SMBUS_BYTE_BLOCK_CMD_MASK 0x80 +#define SMBUS_GROUP_BLOCK_CMD_MASK 0x40 + +/* Commands for read/write registers of Cypress trackpad */ +#define CYAPA_CMD_SOFT_RESET 0x00 +#define CYAPA_CMD_POWER_MODE 0x01 +#define CYAPA_CMD_DEV_STATUS 0x02 +#define CYAPA_CMD_GROUP_DATA 0x03 +#define CYAPA_CMD_GROUP_CMD 0x04 +#define CYAPA_CMD_GROUP_QUERY 0x05 +#define CYAPA_CMD_BL_STATUS 0x06 +#define CYAPA_CMD_BL_HEAD 0x07 +#define CYAPA_CMD_BL_CMD 0x08 +#define CYAPA_CMD_BL_DATA 0x09 +#define CYAPA_CMD_BL_ALL 0x0a +#define CYAPA_CMD_BLK_PRODUCT_ID 0x0b +#define CYAPA_CMD_BLK_HEAD 0x0c +#define CYAPA_CMD_MAX_BASELINE 0x0d +#define CYAPA_CMD_MIN_BASELINE 0x0e + +#define BL_HEAD_OFFSET 0x00 +#define BL_DATA_OFFSET 0x10 + +#define BL_STATUS_SIZE 3 /* Length of gen3 bootloader status registers */ +#define CYAPA_REG_MAP_SIZE 256 + +/* + * Gen3 Operational Device Status Register + * + * bit 7: Valid interrupt source + * bit 6 - 4: Reserved + * bit 3 - 2: Power status + * bit 1 - 0: Device status + */ +#define REG_OP_STATUS 0x00 +#define OP_STATUS_SRC 0x80 +#define OP_STATUS_POWER 0x0c +#define OP_STATUS_DEV 0x03 +#define OP_STATUS_MASK (OP_STATUS_SRC | OP_STATUS_POWER | OP_STATUS_DEV) + +/* + * Operational Finger Count/Button Flags Register + * + * bit 7 - 4: Number of touched finger + * bit 3: Valid data + * bit 2: Middle Physical Button + * bit 1: Right Physical Button + * bit 0: Left physical Button + */ +#define REG_OP_DATA1 0x01 +#define OP_DATA_VALID 0x08 +#define OP_DATA_MIDDLE_BTN 0x04 +#define OP_DATA_RIGHT_BTN 0x02 +#define OP_DATA_LEFT_BTN 0x01 +#define OP_DATA_BTN_MASK (OP_DATA_MIDDLE_BTN | OP_DATA_RIGHT_BTN | \ + OP_DATA_LEFT_BTN) + +/* + * Write-only command file register used to issue commands and + * parameters to the bootloader. + * The default value read from it is always 0x00. + */ +#define REG_BL_FILE 0x00 +#define BL_FILE 0x00 + +/* + * Bootloader Status Register + * + * bit 7: Busy + * bit 6 - 5: Reserved + * bit 4: Bootloader running + * bit 3 - 2: Reserved + * bit 1: Watchdog Reset + * bit 0: Checksum valid + */ +#define REG_BL_STATUS 0x01 +#define BL_STATUS_REV_6_5 0x60 +#define BL_STATUS_BUSY 0x80 +#define BL_STATUS_RUNNING 0x10 +#define BL_STATUS_REV_3_2 0x0c +#define BL_STATUS_WATCHDOG 0x02 +#define BL_STATUS_CSUM_VALID 0x01 +#define BL_STATUS_REV_MASK (BL_STATUS_WATCHDOG | BL_STATUS_REV_3_2 | \ + BL_STATUS_REV_6_5) + +/* + * Bootloader Error Register + * + * bit 7: Invalid + * bit 6: Invalid security key + * bit 5: Bootloading + * bit 4: Command checksum + * bit 3: Flash protection error + * bit 2: Flash checksum error + * bit 1 - 0: Reserved + */ +#define REG_BL_ERROR 0x02 +#define BL_ERROR_INVALID 0x80 +#define BL_ERROR_INVALID_KEY 0x40 +#define BL_ERROR_BOOTLOADING 0x20 +#define BL_ERROR_CMD_CSUM 0x10 +#define BL_ERROR_FLASH_PROT 0x08 +#define BL_ERROR_FLASH_CSUM 0x04 +#define BL_ERROR_RESERVED 0x03 +#define BL_ERROR_NO_ERR_IDLE 0x00 +#define BL_ERROR_NO_ERR_ACTIVE (BL_ERROR_BOOTLOADING) + +#define CAPABILITY_BTN_SHIFT 3 +#define CAPABILITY_LEFT_BTN_MASK (0x01 << 3) +#define CAPABILITY_RIGHT_BTN_MASK (0x01 << 4) +#define CAPABILITY_MIDDLE_BTN_MASK (0x01 << 5) +#define CAPABILITY_BTN_MASK (CAPABILITY_LEFT_BTN_MASK | \ + CAPABILITY_RIGHT_BTN_MASK | \ + CAPABILITY_MIDDLE_BTN_MASK) + +#define PWR_MODE_MASK 0xfc +#define PWR_MODE_FULL_ACTIVE (0x3f << 2) +#define PWR_MODE_IDLE (0x03 << 2) /* Default rt suspend scanrate: 30ms */ +#define PWR_MODE_SLEEP (0x05 << 2) /* Default suspend scanrate: 50ms */ +#define PWR_MODE_BTN_ONLY (0x01 << 2) +#define PWR_MODE_OFF (0x00 << 2) + +#define PWR_STATUS_MASK 0x0c +#define PWR_STATUS_ACTIVE (0x03 << 2) +#define PWR_STATUS_IDLE (0x02 << 2) +#define PWR_STATUS_BTN_ONLY (0x01 << 2) +#define PWR_STATUS_OFF (0x00 << 2) + +#define AUTOSUSPEND_DELAY 2000 /* unit : ms */ + +#define UNINIT_SLEEP_TIME 0xFFFF +#define UNINIT_PWR_MODE 0xFF + +#define BTN_ONLY_MODE_NAME "buttononly" +#define OFF_MODE_NAME "off" + +/* The touch.id is used as the MT slot id, thus max MT slot is 15 */ +#define CYAPA_MAX_MT_SLOTS 15 + +struct cyapa; + +typedef bool (*cb_sort)(struct cyapa *, u8 *, int); + +struct cyapa_dev_ops { + int (*check_fw)(struct cyapa *, const struct firmware *); + int (*bl_enter)(struct cyapa *); + int (*bl_activate)(struct cyapa *); + int (*bl_initiate)(struct cyapa *, const struct firmware *); + int (*update_fw)(struct cyapa *, const struct firmware *); + int (*bl_deactivate)(struct cyapa *); + + ssize_t (*show_baseline)(struct device *, + struct device_attribute *, char *); + ssize_t (*calibrate_store)(struct device *, + struct device_attribute *, const char *, size_t); + + int (*initialize)(struct cyapa *cyapa); + + int (*state_parse)(struct cyapa *cyapa, u8 *reg_status, int len); + int (*operational_check)(struct cyapa *cyapa); + + int (*irq_handler)(struct cyapa *); + bool (*irq_cmd_handler)(struct cyapa *); + int (*sort_empty_output_data)(struct cyapa *, + u8 *, int *, cb_sort); + + int (*set_power_mode)(struct cyapa *, u8, u16); +}; + +struct cyapa_gen5_cmd_states { + struct mutex cmd_lock; + struct completion cmd_ready; + atomic_t cmd_issued; + u8 in_progress_cmd; + bool is_irq_mode; + + cb_sort resp_sort_func; + u8 *resp_data; + int *resp_len; + + u8 irq_cmd_buf[CYAPA_REG_MAP_SIZE]; + u8 empty_buf[CYAPA_REG_MAP_SIZE]; +}; + +union cyapa_cmd_states { + struct cyapa_gen5_cmd_states gen5; +}; + +enum cyapa_state { + CYAPA_STATE_NO_DEVICE, + CYAPA_STATE_BL_BUSY, + CYAPA_STATE_BL_IDLE, + CYAPA_STATE_BL_ACTIVE, + CYAPA_STATE_OP, + CYAPA_STATE_GEN5_BL, + CYAPA_STATE_GEN5_APP, +}; + +/* The main device structure */ +struct cyapa { + enum cyapa_state state; + u8 status[BL_STATUS_SIZE]; + bool operational; /* true: ready for data reporting; false: not. */ + + struct i2c_client *client; + struct input_dev *input; + char phys[32]; /* Device physical location */ + bool irq_wake; /* Irq wake is enabled */ + bool smbus; + + /* power mode settings */ + u8 suspend_power_mode; + u16 suspend_sleep_time; + u8 dev_pwr_mode; + u16 dev_sleep_time; + + /* Read from query data region. */ + char product_id[16]; + u8 fw_maj_ver; /* Firmware major version. */ + u8 fw_min_ver; /* Firmware minor version. */ + u8 btn_capability; + u8 gen; + int max_abs_x; + int max_abs_y; + int physical_size_x; + int physical_size_y; + + /* Used in ttsp and truetouch based trackpad devices. */ + u8 x_origin; /* X Axis Origin: 0 = left side; 1 = rigth side. */ + u8 y_origin; /* Y Axis Origin: 0 = top; 1 = bottom. */ + int electrodes_x; /* Number of electrodes on the X Axis*/ + int electrodes_y; /* Number of electrodes on the Y Axis*/ + int max_z; + + /* + * Used to synchronize the access or update the device state. + * And since update firmware and read firmware image process will take + * quite long time, maybe more than 10 seconds, so use mutex_lock + * to sync and wait other interface and detecting are done or ready. + */ + struct mutex state_sync_lock; + + const struct cyapa_dev_ops *ops; + + union cyapa_cmd_states cmd_states; +}; + + +ssize_t cyapa_i2c_reg_read_block(struct cyapa *cyapa, u8 reg, size_t len, + u8 *values); +ssize_t cyapa_smbus_read_block(struct cyapa *cyapa, u8 cmd, size_t len, + u8 *values); + +ssize_t cyapa_read_block(struct cyapa *cyapa, u8 cmd_idx, u8 *values); + +int cyapa_poll_state(struct cyapa *cyapa, unsigned int timeout); + +u8 cyapa_sleep_time_to_pwr_cmd(u16 sleep_time); +u16 cyapa_pwr_cmd_to_sleep_time(u8 pwr_mode); + + +extern const char product_id[]; +extern const struct cyapa_dev_ops cyapa_gen3_ops; + +#endif |