diff options
Diffstat (limited to 'drivers/iio/pressure/bmp280.h')
| -rw-r--r-- | drivers/iio/pressure/bmp280.h | 107 |
1 files changed, 106 insertions, 1 deletions
diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h index be17104ef0a2..cd4c5be36ed7 100644 --- a/drivers/iio/pressure/bmp280.h +++ b/drivers/iio/pressure/bmp280.h @@ -6,6 +6,107 @@ #include <linux/regulator/consumer.h> +/* BMP580 specific registers */ +#define BMP580_REG_CMD 0x7E +#define BMP580_REG_EFF_OSR 0x38 +#define BMP580_REG_ODR_CONFIG 0x37 +#define BMP580_REG_OSR_CONFIG 0x36 +#define BMP580_REG_IF_CONFIG 0x13 +#define BMP580_REG_REV_ID 0x02 +#define BMP580_REG_CHIP_ID 0x01 +/* OOR allows to configure a pressure alarm */ +#define BMP580_REG_OOR_CONFIG 0x35 +#define BMP580_REG_OOR_RANGE 0x34 +#define BMP580_REG_OOR_THR_MSB 0x33 +#define BMP580_REG_OOR_THR_LSB 0x32 +/* DSP registers (IIR filters) */ +#define BMP580_REG_DSP_IIR 0x31 +#define BMP580_REG_DSP_CONFIG 0x30 +/* NVM access registers */ +#define BMP580_REG_NVM_DATA_MSB 0x2D +#define BMP580_REG_NVM_DATA_LSB 0x2C +#define BMP580_REG_NVM_ADDR 0x2B +/* Status registers */ +#define BMP580_REG_STATUS 0x28 +#define BMP580_REG_INT_STATUS 0x27 +#define BMP580_REG_CHIP_STATUS 0x11 +/* Data registers */ +#define BMP580_REG_FIFO_DATA 0x29 +#define BMP580_REG_PRESS_MSB 0x22 +#define BMP580_REG_PRESS_LSB 0x21 +#define BMP580_REG_PRESS_XLSB 0x20 +#define BMP580_REG_TEMP_MSB 0x1F +#define BMP580_REG_TEMP_LSB 0x1E +#define BMP580_REG_TEMP_XLSB 0x1D +/* FIFO config registers */ +#define BMP580_REG_FIFO_SEL 0x18 +#define BMP580_REG_FIFO_COUNT 0x17 +#define BMP580_REG_FIFO_CONFIG 0x16 +/* Interruptions config registers */ +#define BMP580_REG_INT_SOURCE 0x15 +#define BMP580_REG_INT_CONFIG 0x14 + +#define BMP580_CMD_NOOP 0x00 +#define BMP580_CMD_EXTMODE_SEQ_0 0x73 +#define BMP580_CMD_EXTMODE_SEQ_1 0xB4 +#define BMP580_CMD_EXTMODE_SEQ_2 0x69 +#define BMP580_CMD_NVM_OP_SEQ_0 0x5D +#define BMP580_CMD_NVM_READ_SEQ_1 0xA5 +#define BMP580_CMD_NVM_WRITE_SEQ_1 0xA0 +#define BMP580_CMD_SOFT_RESET 0xB6 + +#define BMP580_INT_STATUS_POR_MASK BIT(4) + +#define BMP580_STATUS_CORE_RDY_MASK BIT(0) +#define BMP580_STATUS_NVM_RDY_MASK BIT(1) +#define BMP580_STATUS_NVM_ERR_MASK BIT(2) +#define BMP580_STATUS_NVM_CMD_ERR_MASK BIT(3) + +#define BMP580_OSR_PRESS_MASK GENMASK(5, 3) +#define BMP580_OSR_TEMP_MASK GENMASK(2, 0) +#define BMP580_OSR_PRESS_EN BIT(6) +#define BMP580_EFF_OSR_PRESS_MASK GENMASK(5, 3) +#define BMP580_EFF_OSR_TEMP_MASK GENMASK(2, 0) +#define BMP580_EFF_OSR_VALID_ODR BIT(7) + +#define BMP580_ODR_MASK GENMASK(6, 2) +#define BMP580_MODE_MASK GENMASK(1, 0) +#define BMP580_MODE_SLEEP 0 +#define BMP580_MODE_NORMAL 1 +#define BMP580_MODE_FORCED 2 +#define BMP580_MODE_CONTINOUS 3 +#define BMP580_ODR_DEEPSLEEP_DIS BIT(7) + +#define BMP580_DSP_COMP_MASK GENMASK(1, 0) +#define BMP580_DSP_COMP_DIS 0 +#define BMP580_DSP_TEMP_COMP_EN 1 +/* + * In section 7.27 of datasheet, modes 2 and 3 are technically the same. + * Pressure compensation means also enabling temperature compensation + */ +#define BMP580_DSP_PRESS_COMP_EN 2 +#define BMP580_DSP_PRESS_TEMP_COMP_EN 3 +#define BMP580_DSP_IIR_FORCED_FLUSH BIT(2) +#define BMP580_DSP_SHDW_IIR_TEMP_EN BIT(3) +#define BMP580_DSP_FIFO_IIR_TEMP_EN BIT(4) +#define BMP580_DSP_SHDW_IIR_PRESS_EN BIT(5) +#define BMP580_DSP_FIFO_IIR_PRESS_EN BIT(6) +#define BMP580_DSP_OOR_IIR_PRESS_EN BIT(7) + +#define BMP580_DSP_IIR_PRESS_MASK GENMASK(5, 3) +#define BMP580_DSP_IIR_TEMP_MASK GENMASK(2, 0) +#define BMP580_FILTER_OFF 0 +#define BMP580_FILTER_1X 1 +#define BMP580_FILTER_3X 2 +#define BMP580_FILTER_7X 3 +#define BMP580_FILTER_15X 4 +#define BMP580_FILTER_31X 5 +#define BMP580_FILTER_63X 6 +#define BMP580_FILTER_127X 7 + +#define BMP580_TEMP_SKIPPED 0x7f7f7f +#define BMP580_PRESS_SKIPPED 0x7f7f7f + /* BMP380 specific registers */ #define BMP380_REG_CMD 0x7E #define BMP380_REG_CONFIG 0x1F @@ -184,6 +285,8 @@ #define BMP280_REG_ID 0xD0 #define BMP380_CHIP_ID 0x50 +#define BMP580_CHIP_ID 0x50 +#define BMP580_CHIP_ID_ALT 0x51 #define BMP180_CHIP_ID 0x55 #define BMP280_CHIP_ID 0x58 #define BME280_CHIP_ID 0x60 @@ -341,7 +444,7 @@ struct bmp280_chip_info { int sampling_freq_default; int (*chip_config)(struct bmp280_data *); - int (*read_temp)(struct bmp280_data *, int *); + int (*read_temp)(struct bmp280_data *, int *, int *); int (*read_press)(struct bmp280_data *, int *, int *); int (*read_humid)(struct bmp280_data *, int *, int *); int (*read_calib)(struct bmp280_data *); @@ -353,11 +456,13 @@ extern const struct bmp280_chip_info bmp180_chip_info; extern const struct bmp280_chip_info bmp280_chip_info; extern const struct bmp280_chip_info bme280_chip_info; extern const struct bmp280_chip_info bmp380_chip_info; +extern const struct bmp280_chip_info bmp580_chip_info; /* Regmap configurations */ extern const struct regmap_config bmp180_regmap_config; extern const struct regmap_config bmp280_regmap_config; extern const struct regmap_config bmp380_regmap_config; +extern const struct regmap_config bmp580_regmap_config; /* Probe called from different transports */ int bmp280_common_probe(struct device *dev, |