summaryrefslogtreecommitdiff
path: root/drivers/iio/adc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/adc')
-rw-r--r--drivers/iio/adc/Kconfig2
-rw-r--r--drivers/iio/adc/ad7124.c14
-rw-r--r--drivers/iio/adc/ad7173.c87
-rw-r--r--drivers/iio/adc/ad7380.c1
-rw-r--r--drivers/iio/adc/rzg2l_adc.c33
5 files changed, 94 insertions, 43 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 6de2abad0197..24f2572c487e 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -1300,7 +1300,7 @@ config RN5T618_ADC
config ROHM_BD79124
tristate "Rohm BD79124 ADC driver"
- depends on I2C
+ depends on I2C && GPIOLIB
select REGMAP_I2C
select IIO_ADC_HELPER
help
diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
index 9808df2e9242..4d8c6bafd1c3 100644
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -849,7 +849,7 @@ enum {
static int ad7124_syscalib_locked(struct ad7124_state *st, const struct iio_chan_spec *chan)
{
struct device *dev = &st->sd.spi->dev;
- struct ad7124_channel *ch = &st->channels[chan->channel];
+ struct ad7124_channel *ch = &st->channels[chan->address];
int ret;
if (ch->syscalib_mode == AD7124_SYSCALIB_ZERO_SCALE) {
@@ -865,8 +865,8 @@ static int ad7124_syscalib_locked(struct ad7124_state *st, const struct iio_chan
if (ret < 0)
return ret;
- dev_dbg(dev, "offset for channel %d after zero-scale calibration: 0x%x\n",
- chan->channel, ch->cfg.calibration_offset);
+ dev_dbg(dev, "offset for channel %lu after zero-scale calibration: 0x%x\n",
+ chan->address, ch->cfg.calibration_offset);
} else {
ch->cfg.calibration_gain = st->gain_default;
@@ -880,8 +880,8 @@ static int ad7124_syscalib_locked(struct ad7124_state *st, const struct iio_chan
if (ret < 0)
return ret;
- dev_dbg(dev, "gain for channel %d after full-scale calibration: 0x%x\n",
- chan->channel, ch->cfg.calibration_gain);
+ dev_dbg(dev, "gain for channel %lu after full-scale calibration: 0x%x\n",
+ chan->address, ch->cfg.calibration_gain);
}
return 0;
@@ -924,7 +924,7 @@ static int ad7124_set_syscalib_mode(struct iio_dev *indio_dev,
{
struct ad7124_state *st = iio_priv(indio_dev);
- st->channels[chan->channel].syscalib_mode = mode;
+ st->channels[chan->address].syscalib_mode = mode;
return 0;
}
@@ -934,7 +934,7 @@ static int ad7124_get_syscalib_mode(struct iio_dev *indio_dev,
{
struct ad7124_state *st = iio_priv(indio_dev);
- return st->channels[chan->channel].syscalib_mode;
+ return st->channels[chan->address].syscalib_mode;
}
static const struct iio_enum ad7124_syscalib_mode_enum = {
diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c
index 4413207be28f..683146e83ab2 100644
--- a/drivers/iio/adc/ad7173.c
+++ b/drivers/iio/adc/ad7173.c
@@ -200,7 +200,7 @@ struct ad7173_channel_config {
/*
* Following fields are used to compare equality. If you
* make adaptations in it, you most likely also have to adapt
- * ad7173_find_live_config(), too.
+ * ad7173_is_setup_equal(), too.
*/
struct_group(config_props,
bool bipolar;
@@ -561,12 +561,19 @@ static void ad7173_reset_usage_cnts(struct ad7173_state *st)
st->config_usage_counter = 0;
}
-static struct ad7173_channel_config *
-ad7173_find_live_config(struct ad7173_state *st, struct ad7173_channel_config *cfg)
+/**
+ * ad7173_is_setup_equal - Compare two channel setups
+ * @cfg1: First channel configuration
+ * @cfg2: Second channel configuration
+ *
+ * Compares all configuration options that affect the registers connected to
+ * SETUP_SEL, namely CONFIGx, FILTERx, GAINx and OFFSETx.
+ *
+ * Returns: true if the setups are identical, false otherwise
+ */
+static bool ad7173_is_setup_equal(const struct ad7173_channel_config *cfg1,
+ const struct ad7173_channel_config *cfg2)
{
- struct ad7173_channel_config *cfg_aux;
- int i;
-
/*
* This is just to make sure that the comparison is adapted after
* struct ad7173_channel_config was changed.
@@ -579,14 +586,22 @@ ad7173_find_live_config(struct ad7173_state *st, struct ad7173_channel_config *c
u8 ref_sel;
}));
+ return cfg1->bipolar == cfg2->bipolar &&
+ cfg1->input_buf == cfg2->input_buf &&
+ cfg1->odr == cfg2->odr &&
+ cfg1->ref_sel == cfg2->ref_sel;
+}
+
+static struct ad7173_channel_config *
+ad7173_find_live_config(struct ad7173_state *st, struct ad7173_channel_config *cfg)
+{
+ struct ad7173_channel_config *cfg_aux;
+ int i;
+
for (i = 0; i < st->num_channels; i++) {
cfg_aux = &st->channels[i].cfg;
- if (cfg_aux->live &&
- cfg->bipolar == cfg_aux->bipolar &&
- cfg->input_buf == cfg_aux->input_buf &&
- cfg->odr == cfg_aux->odr &&
- cfg->ref_sel == cfg_aux->ref_sel)
+ if (cfg_aux->live && ad7173_is_setup_equal(cfg, cfg_aux))
return cfg_aux;
}
return NULL;
@@ -1228,7 +1243,7 @@ static int ad7173_update_scan_mode(struct iio_dev *indio_dev,
const unsigned long *scan_mask)
{
struct ad7173_state *st = iio_priv(indio_dev);
- int i, ret;
+ int i, j, k, ret;
for (i = 0; i < indio_dev->num_channels; i++) {
if (test_bit(i, scan_mask))
@@ -1239,6 +1254,54 @@ static int ad7173_update_scan_mode(struct iio_dev *indio_dev,
return ret;
}
+ /*
+ * On some chips, there are more channels that setups, so if there were
+ * more unique setups requested than the number of available slots,
+ * ad7173_set_channel() will have written over some of the slots. We
+ * can detect this by making sure each assigned cfg_slot matches the
+ * requested configuration. If it doesn't, we know that the slot was
+ * overwritten by a different channel.
+ */
+ for_each_set_bit(i, scan_mask, indio_dev->num_channels) {
+ const struct ad7173_channel_config *cfg1, *cfg2;
+
+ cfg1 = &st->channels[i].cfg;
+
+ for_each_set_bit(j, scan_mask, indio_dev->num_channels) {
+ cfg2 = &st->channels[j].cfg;
+
+ /*
+ * Only compare configs that are assigned to the same
+ * SETUP_SEL slot and don't compare channel to itself.
+ */
+ if (i == j || cfg1->cfg_slot != cfg2->cfg_slot)
+ continue;
+
+ /*
+ * If we find two different configs trying to use the
+ * same SETUP_SEL slot, then we know that the that we
+ * have too many unique configurations requested for
+ * the available slots and at least one was overwritten.
+ */
+ if (!ad7173_is_setup_equal(cfg1, cfg2)) {
+ /*
+ * At this point, there isn't a way to tell
+ * which setups are actually programmed in the
+ * ADC anymore, so we could read them back to
+ * see, but it is simpler to just turn off all
+ * of the live flags so that everything gets
+ * reprogramed on the next attempt read a sample.
+ */
+ for (k = 0; k < st->num_channels; k++)
+ st->channels[k].cfg.live = false;
+
+ dev_err(&st->sd.spi->dev,
+ "Too many unique channel configurations requested for scan\n");
+ return -EINVAL;
+ }
+ }
+ }
+
return 0;
}
diff --git a/drivers/iio/adc/ad7380.c b/drivers/iio/adc/ad7380.c
index 6f7034b6c266..fa251dc1aae6 100644
--- a/drivers/iio/adc/ad7380.c
+++ b/drivers/iio/adc/ad7380.c
@@ -873,6 +873,7 @@ static const struct ad7380_chip_info adaq4381_4_chip_info = {
.has_hardware_gain = true,
.available_scan_masks = ad7380_4_channel_scan_masks,
.timing_specs = &ad7380_4_timing,
+ .max_conversion_rate_hz = 4 * MEGA,
};
static const struct spi_offload_config ad7380_offload_config = {
diff --git a/drivers/iio/adc/rzg2l_adc.c b/drivers/iio/adc/rzg2l_adc.c
index 9674d48074c9..cadb0446bc29 100644
--- a/drivers/iio/adc/rzg2l_adc.c
+++ b/drivers/iio/adc/rzg2l_adc.c
@@ -89,7 +89,6 @@ struct rzg2l_adc {
struct completion completion;
struct mutex lock;
u16 last_val[RZG2L_ADC_MAX_CHANNELS];
- bool was_rpm_active;
};
/**
@@ -428,6 +427,8 @@ static int rzg2l_adc_probe(struct platform_device *pdev)
if (!indio_dev)
return -ENOMEM;
+ platform_set_drvdata(pdev, indio_dev);
+
adc = iio_priv(indio_dev);
adc->hw_params = device_get_match_data(dev);
@@ -460,8 +461,6 @@ static int rzg2l_adc_probe(struct platform_device *pdev)
if (ret)
return ret;
- platform_set_drvdata(pdev, indio_dev);
-
ret = rzg2l_adc_hw_init(dev, adc);
if (ret)
return dev_err_probe(&pdev->dev, ret,
@@ -541,14 +540,9 @@ static int rzg2l_adc_suspend(struct device *dev)
};
int ret;
- if (pm_runtime_suspended(dev)) {
- adc->was_rpm_active = false;
- } else {
- ret = pm_runtime_force_suspend(dev);
- if (ret)
- return ret;
- adc->was_rpm_active = true;
- }
+ ret = pm_runtime_force_suspend(dev);
+ if (ret)
+ return ret;
ret = reset_control_bulk_assert(ARRAY_SIZE(resets), resets);
if (ret)
@@ -557,9 +551,7 @@ static int rzg2l_adc_suspend(struct device *dev)
return 0;
rpm_restore:
- if (adc->was_rpm_active)
- pm_runtime_force_resume(dev);
-
+ pm_runtime_force_resume(dev);
return ret;
}
@@ -577,11 +569,9 @@ static int rzg2l_adc_resume(struct device *dev)
if (ret)
return ret;
- if (adc->was_rpm_active) {
- ret = pm_runtime_force_resume(dev);
- if (ret)
- goto resets_restore;
- }
+ ret = pm_runtime_force_resume(dev);
+ if (ret)
+ goto resets_restore;
ret = rzg2l_adc_hw_init(dev, adc);
if (ret)
@@ -590,10 +580,7 @@ static int rzg2l_adc_resume(struct device *dev)
return 0;
rpm_restore:
- if (adc->was_rpm_active) {
- pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
- }
+ pm_runtime_force_suspend(dev);
resets_restore:
reset_control_bulk_assert(ARRAY_SIZE(resets), resets);
return ret;
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-24 09:25:47 +0300