diff options
Diffstat (limited to 'drivers/i2c')
28 files changed, 468 insertions, 168 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index c8d115b58e44..ae8fcc864060 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -165,6 +165,7 @@ config I2C_I801 Birch Stream (SOC) Arrow Lake (SOC) Panther Lake (SOC) + Wildcat Lake (SOC) This driver can also be built as a module. If so, the module will be called i2c-i801. @@ -414,7 +415,7 @@ config I2C_ASPEED config I2C_AT91 tristate "Atmel AT91 I2C Two-Wire interface (TWI)" - depends on ARCH_AT91 || COMPILE_TEST + depends on ARCH_MICROCHIP || COMPILE_TEST help This supports the use of the I2C interface on Atmel AT91 processors. @@ -992,7 +993,6 @@ config I2C_APPLE tristate "Apple SMBus platform driver" depends on !I2C_PASEMI depends on ARCH_APPLE || COMPILE_TEST - default ARCH_APPLE help Say Y here if you want to use the I2C controller present on Apple Silicon chips such as the M1. @@ -1358,6 +1358,16 @@ config I2C_LJCA This driver can also be built as a module. If so, the module will be called i2c-ljca. +config I2C_NCT6694 + tristate "Nuvoton NCT6694 I2C adapter support" + depends on MFD_NCT6694 + help + If you say yes to this option, support will be included for Nuvoton + NCT6694, a USB to I2C interface. + + This driver can also be built as a module. If so, the module will + be called i2c-nct6694. + config I2C_CP2615 tristate "Silicon Labs CP2615 USB sound card and I2C adapter" depends on USB diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 04db855fdfd6..fe8cf6325fc9 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -135,6 +135,7 @@ obj-$(CONFIG_I2C_GXP) += i2c-gxp.o obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o obj-$(CONFIG_I2C_DLN2) += i2c-dln2.o obj-$(CONFIG_I2C_LJCA) += i2c-ljca.o +obj-$(CONFIG_I2C_NCT6694) += i2c-nct6694.o obj-$(CONFIG_I2C_CP2615) += i2c-cp2615.o obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o obj-$(CONFIG_I2C_PCI1XXXX) += i2c-mchp-pci1xxxx.o diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index cbd88ffa5610..c7a72c28786c 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -1068,11 +1068,10 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev) if (!(dev->flags & ACCESS_POLLING)) { ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags, dev_name(dev->dev), dev); - if (ret) { - dev_err(dev->dev, "failure requesting irq %i: %d\n", - dev->irq, ret); - return ret; - } + if (ret) + return dev_err_probe(dev->dev, ret, + "failure requesting irq %i: %d\n", + dev->irq, ret); } ret = i2c_dw_init_recovery_info(dev); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 879719e91df2..34d881572351 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -101,7 +101,7 @@ static int bt1_i2c_request_regs(struct dw_i2c_dev *dev) } #endif -static int txgbe_i2c_request_regs(struct dw_i2c_dev *dev) +static int dw_i2c_get_parent_regmap(struct dw_i2c_dev *dev) { dev->map = dev_get_regmap(dev->dev->parent, NULL); if (!dev->map) @@ -123,12 +123,15 @@ static int dw_i2c_plat_request_regs(struct dw_i2c_dev *dev) struct platform_device *pdev = to_platform_device(dev->dev); int ret; + if (device_is_compatible(dev->dev, "intel,xe-i2c")) + return dw_i2c_get_parent_regmap(dev); + switch (dev->flags & MODEL_MASK) { case MODEL_BAIKAL_BT1: ret = bt1_i2c_request_regs(dev); break; case MODEL_WANGXUN_SP: - ret = txgbe_i2c_request_regs(dev); + ret = dw_i2c_get_parent_regmap(dev); break; default: dev->base = devm_platform_ioremap_resource(pdev, 0); @@ -205,25 +208,28 @@ static void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev) static int dw_i2c_plat_probe(struct platform_device *pdev) { + u32 flags = (uintptr_t)device_get_match_data(&pdev->dev); struct device *device = &pdev->dev; struct i2c_adapter *adap; struct dw_i2c_dev *dev; int irq, ret; - irq = platform_get_irq(pdev, 0); - if (irq < 0) + irq = platform_get_irq_optional(pdev, 0); + if (irq == -ENXIO) + flags |= ACCESS_POLLING; + else if (irq < 0) return irq; dev = devm_kzalloc(device, sizeof(*dev), GFP_KERNEL); if (!dev) return -ENOMEM; - dev->flags = (uintptr_t)device_get_match_data(device); if (device_property_present(device, "wx,i2c-snps-model")) - dev->flags = MODEL_WANGXUN_SP | ACCESS_POLLING; + flags = MODEL_WANGXUN_SP | ACCESS_POLLING; dev->dev = device; dev->irq = irq; + dev->flags = flags; platform_set_drvdata(pdev, dev); ret = dw_i2c_plat_request_regs(dev); @@ -232,7 +238,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) dev->rst = devm_reset_control_get_optional_exclusive(device, NULL); if (IS_ERR(dev->rst)) - return PTR_ERR(dev->rst); + return dev_err_probe(device, PTR_ERR(dev->rst), "failed to acquire reset\n"); reset_control_deassert(dev->rst); @@ -241,21 +247,23 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) goto exit_reset; ret = i2c_dw_probe_lock_support(dev); - if (ret) + if (ret) { + ret = dev_err_probe(device, ret, "failed to probe lock support\n"); goto exit_reset; + } i2c_dw_configure(dev); /* Optional interface clock */ dev->pclk = devm_clk_get_optional(device, "pclk"); if (IS_ERR(dev->pclk)) { - ret = PTR_ERR(dev->pclk); + ret = dev_err_probe(device, PTR_ERR(dev->pclk), "failed to acquire pclk\n"); goto exit_reset; } dev->clk = devm_clk_get_optional(device, NULL); if (IS_ERR(dev->clk)) { - ret = PTR_ERR(dev->clk); + ret = dev_err_probe(device, PTR_ERR(dev->clk), "failed to acquire clock\n"); goto exit_reset; } @@ -308,6 +316,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) exit_probe: dw_i2c_plat_pm_cleanup(dev); + i2c_dw_prepare_clk(dev, false); exit_reset: reset_control_assert(dev->rst); return ret; @@ -325,9 +334,11 @@ static void dw_i2c_plat_remove(struct platform_device *pdev) i2c_dw_disable(dev); pm_runtime_dont_use_autosuspend(device); - pm_runtime_put_sync(device); + pm_runtime_put_noidle(device); dw_i2c_plat_pm_cleanup(dev); + i2c_dw_prepare_clk(dev, false); + i2c_dw_remove_lock_support(dev); reset_control_assert(dev->rst); diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c index b936a240db0a..6eb16b7d75a6 100644 --- a/drivers/i2c/busses/i2c-designware-slave.c +++ b/drivers/i2c/busses/i2c-designware-slave.c @@ -266,11 +266,10 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev) ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr_slave, IRQF_SHARED, dev_name(dev->dev), dev); - if (ret) { - dev_err(dev->dev, "failure requesting IRQ %i: %d\n", - dev->irq, ret); - return ret; - } + if (ret) + return dev_err_probe(dev->dev, ret, + "failure requesting IRQ %i: %d\n", + dev->irq, ret); ret = i2c_add_numbered_adapter(adap); if (ret) diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c index 370f32974763..5358f5ddf924 100644 --- a/drivers/i2c/busses/i2c-hix5hd2.c +++ b/drivers/i2c/busses/i2c-hix5hd2.c @@ -339,7 +339,7 @@ static int hix5hd2_i2c_xfer_msg(struct hix5hd2_i2c_priv *priv, ret = priv->state; /* - * If this is the last message to be transfered (stop == 1) + * If this is the last message to be transferred (stop == 1) * Then check if the bus can be brought back to idle. */ if (priv->state == HIX5I2C_STAT_RW_SUCCESS && stop) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index a7f89946dad4..cba992fa6557 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -83,6 +83,7 @@ * Arrow Lake-H (SOC) 0x7722 32 hard yes yes yes * Panther Lake-H (SOC) 0xe322 32 hard yes yes yes * Panther Lake-P (SOC) 0xe422 32 hard yes yes yes + * Wildcat Lake-U (SOC) 0x4d22 32 hard yes yes yes * * Features supported by this driver: * Software PEC no @@ -236,6 +237,7 @@ #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 #define PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS 0x43a3 #define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS 0x4b23 +#define PCI_DEVICE_ID_INTEL_WILDCAT_LAKE_U_SMBUS 0x4d22 #define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS 0x4da3 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS 0x51a3 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS 0x54a3 @@ -1052,10 +1054,11 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE_DATA(INTEL, METEOR_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, { PCI_DEVICE_DATA(INTEL, METEOR_LAKE_SOC_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, { PCI_DEVICE_DATA(INTEL, METEOR_LAKE_PCH_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, - { PCI_DEVICE_DATA(INTEL, BIRCH_STREAM_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, + { PCI_DEVICE_DATA(INTEL, BIRCH_STREAM_SMBUS, FEATURES_ICH5) }, { PCI_DEVICE_DATA(INTEL, ARROW_LAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, { PCI_DEVICE_DATA(INTEL, PANTHER_LAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, { PCI_DEVICE_DATA(INTEL, PANTHER_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, + { PCI_DEVICE_DATA(INTEL, WILDCAT_LAKE_U_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, { 0, } }; diff --git a/drivers/i2c/busses/i2c-k1.c b/drivers/i2c/busses/i2c-k1.c index b68a21fff0b5..6b918770e612 100644 --- a/drivers/i2c/busses/i2c-k1.c +++ b/drivers/i2c/busses/i2c-k1.c @@ -3,6 +3,7 @@ * Copyright (C) 2024-2025 Troy Mitchell <troymitchell988@gmail.com> */ +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/i2c.h> #include <linux/iopoll.h> @@ -14,6 +15,7 @@ #define SPACEMIT_ICR 0x0 /* Control register */ #define SPACEMIT_ISR 0x4 /* Status register */ #define SPACEMIT_IDBR 0xc /* Data buffer register */ +#define SPACEMIT_IRCR 0x18 /* Reset cycle counter */ #define SPACEMIT_IBMR 0x1c /* Bus monitor register */ /* SPACEMIT_ICR register fields */ @@ -25,7 +27,8 @@ #define SPACEMIT_CR_MODE_FAST BIT(8) /* bus mode (master operation) */ /* Bit 9 is reserved */ #define SPACEMIT_CR_UR BIT(10) /* unit reset */ -/* Bits 11-12 are reserved */ +#define SPACEMIT_CR_RSTREQ BIT(11) /* i2c bus reset request */ +/* Bit 12 is reserved */ #define SPACEMIT_CR_SCLE BIT(13) /* master clock enable */ #define SPACEMIT_CR_IUE BIT(14) /* unit enable */ /* Bits 15-17 are reserved */ @@ -76,6 +79,10 @@ SPACEMIT_SR_GCAD | SPACEMIT_SR_IRF | SPACEMIT_SR_ITE | \ SPACEMIT_SR_ALD) +#define SPACEMIT_RCR_SDA_GLITCH_NOFIX BIT(7) /* bypass the SDA glitch fix */ +/* the cycles of SCL during bus reset */ +#define SPACEMIT_RCR_FIELD_RST_CYC GENMASK(3, 0) + /* SPACEMIT_IBMR register fields */ #define SPACEMIT_BMR_SDA BIT(0) /* SDA line level */ #define SPACEMIT_BMR_SCL BIT(1) /* SCL line level */ @@ -88,6 +95,8 @@ #define SPACEMIT_SR_ERR (SPACEMIT_SR_BED | SPACEMIT_SR_RXOV | SPACEMIT_SR_ALD) +#define SPACEMIT_BUS_RESET_CLK_CNT_MAX 9 + enum spacemit_i2c_state { SPACEMIT_STATE_IDLE, SPACEMIT_STATE_START, @@ -160,6 +169,7 @@ static int spacemit_i2c_handle_err(struct spacemit_i2c_dev *i2c) static void spacemit_i2c_conditionally_reset_bus(struct spacemit_i2c_dev *i2c) { u32 status; + u8 clk_cnt; /* if bus is locked, reset unit. 0: locked */ status = readl(i2c->base + SPACEMIT_IBMR); @@ -169,9 +179,21 @@ static void spacemit_i2c_conditionally_reset_bus(struct spacemit_i2c_dev *i2c) spacemit_i2c_reset(i2c); usleep_range(10, 20); - /* check scl status again */ + for (clk_cnt = 0; clk_cnt < SPACEMIT_BUS_RESET_CLK_CNT_MAX; clk_cnt++) { + status = readl(i2c->base + SPACEMIT_IBMR); + if (status & SPACEMIT_BMR_SDA) + return; + + /* There's nothing left to save here, we are about to exit */ + writel(FIELD_PREP(SPACEMIT_RCR_FIELD_RST_CYC, 1), + i2c->base + SPACEMIT_IRCR); + writel(SPACEMIT_CR_RSTREQ, i2c->base + SPACEMIT_ICR); + usleep_range(20, 30); + } + + /* check sda again here */ status = readl(i2c->base + SPACEMIT_IBMR); - if (!(status & SPACEMIT_BMR_SCL)) + if (!(status & SPACEMIT_BMR_SDA)) dev_warn_ratelimited(i2c->dev, "unit reset failed\n"); } @@ -237,6 +259,14 @@ static void spacemit_i2c_init(struct spacemit_i2c_dev *i2c) val |= SPACEMIT_CR_MSDE | SPACEMIT_CR_MSDIE; writel(val, i2c->base + SPACEMIT_ICR); + + /* + * The glitch fix in the K1 I2C controller introduces a delay + * on restart signals, so we disable the fix here. + */ + val = readl(i2c->base + SPACEMIT_IRCR); + val |= SPACEMIT_RCR_SDA_GLITCH_NOFIX; + writel(val, i2c->base + SPACEMIT_IRCR); } static inline void @@ -267,19 +297,6 @@ static void spacemit_i2c_start(struct spacemit_i2c_dev *i2c) writel(val, i2c->base + SPACEMIT_ICR); } -static void spacemit_i2c_stop(struct spacemit_i2c_dev *i2c) -{ - u32 val; - - val = readl(i2c->base + SPACEMIT_ICR); - val |= SPACEMIT_CR_STOP | SPACEMIT_CR_ALDIE | SPACEMIT_CR_TB; - - if (i2c->read) - val |= SPACEMIT_CR_ACKNAK; - - writel(val, i2c->base + SPACEMIT_ICR); -} - static int spacemit_i2c_xfer_msg(struct spacemit_i2c_dev *i2c) { unsigned long time_left; @@ -412,7 +429,6 @@ static irqreturn_t spacemit_i2c_irq_handler(int irq, void *devid) val = readl(i2c->base + SPACEMIT_ICR); val &= ~(SPACEMIT_CR_TB | SPACEMIT_CR_ACKNAK | SPACEMIT_CR_STOP | SPACEMIT_CR_START); - writel(val, i2c->base + SPACEMIT_ICR); switch (i2c->state) { case SPACEMIT_STATE_START: @@ -429,14 +445,16 @@ static irqreturn_t spacemit_i2c_irq_handler(int irq, void *devid) } if (i2c->state != SPACEMIT_STATE_IDLE) { + val |= SPACEMIT_CR_TB | SPACEMIT_CR_ALDIE; + if (spacemit_i2c_is_last_msg(i2c)) { /* trigger next byte with stop */ - spacemit_i2c_stop(i2c); - } else { - /* trigger next byte */ - val |= SPACEMIT_CR_ALDIE | SPACEMIT_CR_TB; - writel(val, i2c->base + SPACEMIT_ICR); + val |= SPACEMIT_CR_STOP; + + if (i2c->read) + val |= SPACEMIT_CR_ACKNAK; } + writel(val, i2c->base + SPACEMIT_ICR); } err_out: @@ -476,12 +494,13 @@ static int spacemit_i2c_xfer(struct i2c_adapter *adapt, struct i2c_msg *msgs, in spacemit_i2c_enable(i2c); ret = spacemit_i2c_wait_bus_idle(i2c); - if (!ret) + if (!ret) { ret = spacemit_i2c_xfer_msg(i2c); - else if (ret < 0) - dev_dbg(i2c->dev, "i2c transfer error: %d\n", ret); - else + if (ret < 0) + dev_dbg(i2c->dev, "i2c transfer error: %d\n", ret); + } else { spacemit_i2c_check_bus_release(i2c); + } spacemit_i2c_disable(i2c); diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index ab456c3717db..dee40704825c 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -1243,6 +1243,7 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap, { int ret; int left_num = num; + bool write_then_read_en = false; struct mtk_i2c *i2c = i2c_get_adapdata(adap); ret = clk_bulk_enable(I2C_MT65XX_CLK_MAX, i2c->clocks); @@ -1256,6 +1257,7 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap, if (!(msgs[0].flags & I2C_M_RD) && (msgs[1].flags & I2C_M_RD) && msgs[0].addr == msgs[1].addr) { i2c->auto_restart = 0; + write_then_read_en = true; } } @@ -1280,12 +1282,10 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap, else i2c->op = I2C_MASTER_WR; - if (!i2c->auto_restart) { - if (num > 1) { - /* combined two messages into one transaction */ - i2c->op = I2C_MASTER_WRRD; - left_num--; - } + if (write_then_read_en) { + /* combined two messages into one transaction */ + i2c->op = I2C_MASTER_WRRD; + left_num--; } /* always use DMA mode. */ @@ -1293,7 +1293,10 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap, if (ret < 0) goto err_exit; - msgs++; + if (i2c->op == I2C_MASTER_WRRD) + msgs += 2; + else + msgs++; } /* the return value is number of executed messages */ ret = num; diff --git a/drivers/i2c/busses/i2c-nct6694.c b/drivers/i2c/busses/i2c-nct6694.c new file mode 100644 index 000000000000..1413ab6f9462 --- /dev/null +++ b/drivers/i2c/busses/i2c-nct6694.c @@ -0,0 +1,196 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Nuvoton NCT6694 I2C adapter driver based on USB interface. + * + * Copyright (C) 2025 Nuvoton Technology Corp. + */ + +#include <linux/i2c.h> +#include <linux/idr.h> +#include <linux/kernel.h> +#include <linux/mfd/nct6694.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +/* + * USB command module type for NCT6694 I2C controller. + * This defines the module type used for communication with the NCT6694 + * I2C controller over the USB interface. + */ +#define NCT6694_I2C_MOD 0x03 + +/* Command 00h - I2C Deliver */ +#define NCT6694_I2C_DELIVER 0x00 +#define NCT6694_I2C_DELIVER_SEL 0x00 + +#define NCT6694_I2C_MAX_XFER_SIZE 64 +#define NCT6694_I2C_MAX_DEVS 6 + +static unsigned char br_reg[NCT6694_I2C_MAX_DEVS] = {[0 ... (NCT6694_I2C_MAX_DEVS - 1)] = 0xFF}; + +module_param_array(br_reg, byte, NULL, 0644); +MODULE_PARM_DESC(br_reg, + "I2C Baudrate register per adapter: (0=25K, 1=50K, 2=100K, 3=200K, 4=400K, 5=800K, 6=1M), default=2"); + +enum nct6694_i2c_baudrate { + NCT6694_I2C_BR_25K = 0, + NCT6694_I2C_BR_50K, + NCT6694_I2C_BR_100K, + NCT6694_I2C_BR_200K, + NCT6694_I2C_BR_400K, + NCT6694_I2C_BR_800K, + NCT6694_I2C_BR_1M +}; + +struct __packed nct6694_i2c_deliver { + u8 port; + u8 br; + u8 addr; + u8 w_cnt; + u8 r_cnt; + u8 rsv[11]; + u8 write_data[NCT6694_I2C_MAX_XFER_SIZE]; + u8 read_data[NCT6694_I2C_MAX_XFER_SIZE]; +}; + +struct nct6694_i2c_data { + struct device *dev; + struct nct6694 *nct6694; + struct i2c_adapter adapter; + struct nct6694_i2c_deliver deliver; + unsigned char port; + unsigned char br; +}; + +static int nct6694_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) +{ + struct nct6694_i2c_data *data = adap->algo_data; + struct nct6694_i2c_deliver *deliver = &data->deliver; + static const struct nct6694_cmd_header cmd_hd = { + .mod = NCT6694_I2C_MOD, + .cmd = NCT6694_I2C_DELIVER, + .sel = NCT6694_I2C_DELIVER_SEL, + .len = cpu_to_le16(sizeof(*deliver)) + }; + int ret, i; + + for (i = 0; i < num; i++) { + struct i2c_msg *msg_temp = &msgs[i]; + + memset(deliver, 0, sizeof(*deliver)); + + deliver->port = data->port; + deliver->br = data->br; + deliver->addr = i2c_8bit_addr_from_msg(msg_temp); + if (msg_temp->flags & I2C_M_RD) { + deliver->r_cnt = msg_temp->len; + ret = nct6694_write_msg(data->nct6694, &cmd_hd, deliver); + if (ret < 0) + return ret; + + memcpy(msg_temp->buf, deliver->read_data, msg_temp->len); + } else { + deliver->w_cnt = msg_temp->len; + memcpy(deliver->write_data, msg_temp->buf, msg_temp->len); + ret = nct6694_write_msg(data->nct6694, &cmd_hd, deliver); + if (ret < 0) + return ret; + } + } + + return num; +} + +static u32 nct6694_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_adapter_quirks nct6694_i2c_quirks = { + .max_read_len = NCT6694_I2C_MAX_XFER_SIZE, + .max_write_len = NCT6694_I2C_MAX_XFER_SIZE, +}; + +static const struct i2c_algorithm nct6694_i2c_algo = { + .xfer = nct6694_i2c_xfer, + .functionality = nct6694_i2c_func, +}; + +static int nct6694_i2c_set_baudrate(struct nct6694_i2c_data *data) +{ + if (data->port >= NCT6694_I2C_MAX_DEVS) { + dev_err(data->dev, "Invalid I2C port index %d\n", data->port); + return -EINVAL; + } + + if (br_reg[data->port] > NCT6694_I2C_BR_1M) { + dev_warn(data->dev, "Invalid baudrate %d for I2C%d, using 100K\n", + br_reg[data->port], data->port); + br_reg[data->port] = NCT6694_I2C_BR_100K; + } + + data->br = br_reg[data->port]; + + return 0; +} + +static void nct6694_i2c_ida_free(void *d) +{ + struct nct6694_i2c_data *data = d; + struct nct6694 *nct6694 = data->nct6694; + + ida_free(&nct6694->i2c_ida, data->port); +} + +static int nct6694_i2c_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct nct6694 *nct6694 = dev_get_drvdata(dev->parent); + struct nct6694_i2c_data *data; + int ret; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->dev = dev; + data->nct6694 = nct6694; + + ret = ida_alloc(&nct6694->i2c_ida, GFP_KERNEL); + if (ret < 0) + return ret; + data->port = ret; + + ret = devm_add_action_or_reset(dev, nct6694_i2c_ida_free, data); + if (ret) + return ret; + + ret = nct6694_i2c_set_baudrate(data); + if (ret) + return ret; + + sprintf(data->adapter.name, "NCT6694 I2C Adapter %d", data->port); + data->adapter.owner = THIS_MODULE; + data->adapter.algo = &nct6694_i2c_algo; + data->adapter.quirks = &nct6694_i2c_quirks; + data->adapter.dev.parent = dev; + data->adapter.algo_data = data; + + platform_set_drvdata(pdev, data); + + return devm_i2c_add_adapter(dev, &data->adapter); +} + +static struct platform_driver nct6694_i2c_driver = { + .driver = { + .name = "nct6694-i2c", + }, + .probe = nct6694_i2c_probe, +}; + +module_platform_driver(nct6694_i2c_driver); + +MODULE_DESCRIPTION("USB-I2C adapter driver for NCT6694"); +MODULE_AUTHOR("Ming Yu <tmyu0@nuvoton.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:nct6694-i2c"); diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index 13889f52b6f7..95a577764d5c 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -155,9 +155,9 @@ static const struct geni_i2c_clk_fld geni_i2c_clk_map_19p2mhz[] = { /* source_clock = 32 MHz */ static const struct geni_i2c_clk_fld geni_i2c_clk_map_32mhz[] = { - { I2C_MAX_STANDARD_MODE_FREQ, 8, 14, 18, 40 }, - { I2C_MAX_FAST_MODE_FREQ, 4, 3, 11, 20 }, - { I2C_MAX_FAST_MODE_PLUS_FREQ, 2, 3, 6, 15 }, + { I2C_MAX_STANDARD_MODE_FREQ, 8, 14, 18, 38 }, + { I2C_MAX_FAST_MODE_FREQ, 4, 3, 9, 19 }, + { I2C_MAX_FAST_MODE_PLUS_FREQ, 2, 3, 5, 15 }, {} }; @@ -870,7 +870,13 @@ static int geni_i2c_probe(struct platform_device *pdev) goto err_clk; } proto = geni_se_read_proto(&gi2c->se); - if (proto != GENI_SE_I2C) { + if (proto == GENI_SE_INVALID_PROTO) { + ret = geni_load_se_firmware(&gi2c->se, GENI_SE_I2C); + if (ret) { + dev_err_probe(dev, ret, "i2c firmware load failed ret: %d\n", ret); + goto err_resources; + } + } else if (proto != GENI_SE_I2C) { ret = dev_err_probe(dev, -ENXIO, "Invalid proto %d\n", proto); goto err_resources; } diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c index 9c164a4b9bb9..b0ee9ac45a97 100644 --- a/drivers/i2c/busses/i2c-riic.c +++ b/drivers/i2c/busses/i2c-riic.c @@ -386,7 +386,7 @@ static int riic_init_hw(struct riic_dev *riic) */ total_ticks = DIV_ROUND_UP(rate, t->bus_freq_hz ?: 1); - for (cks = 0; cks < 7; cks++) { + for (cks = 0; cks <= 7; cks++) { /* * 60% low time must be less than BRL + 2 + 1 * BRL max register value is 0x1F. diff --git a/drivers/i2c/busses/i2c-rtl9300.c b/drivers/i2c/busses/i2c-rtl9300.c index e064e8a4a1f0..af991b28e4f8 100644 --- a/drivers/i2c/busses/i2c-rtl9300.c +++ b/drivers/i2c/busses/i2c-rtl9300.c @@ -99,6 +99,9 @@ static int rtl9300_i2c_config_xfer(struct rtl9300_i2c *i2c, struct rtl9300_i2c_c { u32 val, mask; + if (len < 1 || len > 16) + return -EINVAL; + val = chan->bus_freq << RTL9300_I2C_MST_CTRL2_SCL_FREQ_OFS; mask = RTL9300_I2C_MST_CTRL2_SCL_FREQ_MASK; @@ -143,10 +146,10 @@ static int rtl9300_i2c_write(struct rtl9300_i2c *i2c, u8 *buf, int len) return -EIO; for (i = 0; i < len; i++) { - if (i % 4 == 0) - vals[i/4] = 0; - vals[i/4] <<= 8; - vals[i/4] |= buf[i]; + unsigned int shift = (i % 4) * 8; + unsigned int reg = i / 4; + + vals[reg] |= buf[i] << shift; } return regmap_bulk_write(i2c->regmap, i2c->reg_base + RTL9300_I2C_MST_DATA_WORD0, @@ -175,7 +178,7 @@ static int rtl9300_i2c_execute_xfer(struct rtl9300_i2c *i2c, char read_write, return ret; ret = regmap_read_poll_timeout(i2c->regmap, i2c->reg_base + RTL9300_I2C_MST_CTRL1, - val, !(val & RTL9300_I2C_MST_CTRL1_I2C_TRIG), 100, 2000); + val, !(val & RTL9300_I2C_MST_CTRL1_I2C_TRIG), 100, 100000); if (ret) return ret; @@ -222,15 +225,6 @@ static int rtl9300_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr, unsigned s } switch (size) { - case I2C_SMBUS_QUICK: - ret = rtl9300_i2c_config_xfer(i2c, chan, addr, 0); - if (ret) - goto out_unlock; - ret = rtl9300_i2c_reg_addr_set(i2c, 0, 0); - if (ret) - goto out_unlock; - break; - case I2C_SMBUS_BYTE: if (read_write == I2C_SMBUS_WRITE) { ret = rtl9300_i2c_config_xfer(i2c, chan, addr, 0); @@ -281,15 +275,19 @@ static int rtl9300_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr, unsigned s ret = rtl9300_i2c_reg_addr_set(i2c, command, 1); if (ret) goto out_unlock; - ret = rtl9300_i2c_config_xfer(i2c, chan, addr, data->block[0]); + if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX) { + ret = -EINVAL; + goto out_unlock; + } + ret = rtl9300_i2c_config_xfer(i2c, chan, addr, data->block[0] + 1); if (ret) goto out_unlock; if (read_write == I2C_SMBUS_WRITE) { - ret = rtl9300_i2c_write(i2c, &data->block[1], data->block[0]); + ret = rtl9300_i2c_write(i2c, &data->block[0], data->block[0] + 1); if (ret) goto out_unlock; } - len = data->block[0]; + len = data->block[0] + 1; break; default: @@ -308,9 +306,8 @@ out_unlock: static u32 rtl9300_i2c_func(struct i2c_adapter *a) { - return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | - I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | - I2C_FUNC_SMBUS_BLOCK_DATA; + return I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA; } static const struct i2c_algorithm rtl9300_i2c_algo = { @@ -319,7 +316,7 @@ static const struct i2c_algorithm rtl9300_i2c_algo = { }; static struct i2c_adapter_quirks rtl9300_i2c_quirks = { - .flags = I2C_AQ_NO_CLK_STRETCH, + .flags = I2C_AQ_NO_CLK_STRETCH | I2C_AQ_NO_ZERO_LEN, .max_read_len = 16, .max_write_len = 16, }; @@ -349,7 +346,7 @@ static int rtl9300_i2c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, i2c); - if (device_get_child_node_count(dev) >= RTL9300_I2C_MUX_NCHAN) + if (device_get_child_node_count(dev) > RTL9300_I2C_MUX_NCHAN) return dev_err_probe(dev, -EINVAL, "Too many channels\n"); device_for_each_child_node(dev, child) { diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index f4fa4703acbd..8138f5ef40f0 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -138,7 +138,6 @@ static void i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) #ifdef CONFIG_OF static const struct of_device_id s3c24xx_i2c_match[] = { - { .compatible = "samsung,s3c2410-i2c", .data = (void *)0 }, { .compatible = "samsung,s3c2440-i2c", .data = (void *)QUIRK_S3C2440 }, { .compatible = "samsung,s3c2440-hdmiphy-i2c", .data = (void *)(QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO) }, diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c index 56b2e5c5fb49..26ec34b19ad5 100644 --- a/drivers/i2c/busses/i2c-sprd.c +++ b/drivers/i2c/busses/i2c-sprd.c @@ -425,7 +425,7 @@ static irqreturn_t sprd_i2c_isr(int irq, void *dev_id) * If we did not get one ACK from target when writing data, then we * should finish this transmission since we got some errors. * - * When writing data, if i2c_tran == 0 which means we have writen + * When writing data, if i2c_tran == 0 which means we have written * done all data, then we can finish this transmission. * * When reading data, if conut < rx fifo full threshold, which diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c index bf28f8e3ee6b..97d70e667227 100644 --- a/drivers/i2c/busses/i2c-st.c +++ b/drivers/i2c/busses/i2c-st.c @@ -152,7 +152,7 @@ struct st_i2c_timings { /** * struct st_i2c_client - client specific data * @addr: 8-bit target addr, including r/w bit - * @count: number of bytes to be transfered + * @count: number of bytes to be transferred * @xfered: number of bytes already transferred * @buf: data buffer * @result: result of the transfer diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index c8b4b404f6c1..e6815f6cae78 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -742,11 +742,14 @@ static void stm32f7_i2c_dma_callback(void *arg) { struct stm32f7_i2c_dev *i2c_dev = arg; struct stm32_i2c_dma *dma = i2c_dev->dma; + struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; stm32f7_i2c_disable_dma_req(i2c_dev); dmaengine_terminate_async(dma->chan_using); dma_unmap_single(i2c_dev->dev, dma->dma_buf, dma->dma_len, dma->dma_data_dir); + if (!f7_msg->smbus) + i2c_put_dma_safe_msg_buf(f7_msg->buf, i2c_dev->msg, true); complete(&dma->dma_complete); } @@ -882,6 +885,7 @@ static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev, { struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; void __iomem *base = i2c_dev->base; + u8 *dma_buf; u32 cr1, cr2; int ret; @@ -931,17 +935,23 @@ static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev, /* Configure DMA or enable RX/TX interrupt */ i2c_dev->use_dma = false; - if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN - && !i2c_dev->atomic) { - ret = stm32_i2c_prep_dma_xfer(i2c_dev->dev, i2c_dev->dma, - msg->flags & I2C_M_RD, - f7_msg->count, f7_msg->buf, - stm32f7_i2c_dma_callback, - i2c_dev); - if (!ret) - i2c_dev->use_dma = true; - else - dev_warn(i2c_dev->dev, "can't use DMA\n"); + if (i2c_dev->dma && !i2c_dev->atomic) { + dma_buf = i2c_get_dma_safe_msg_buf(msg, STM32F7_I2C_DMA_LEN_MIN); + if (dma_buf) { + f7_msg->buf = dma_buf; + ret = stm32_i2c_prep_dma_xfer(i2c_dev->dev, i2c_dev->dma, + msg->flags & I2C_M_RD, + f7_msg->count, f7_msg->buf, + stm32f7_i2c_dma_callback, + i2c_dev); + if (ret) { + dev_warn(i2c_dev->dev, "can't use DMA\n"); + i2c_put_dma_safe_msg_buf(f7_msg->buf, msg, false); + f7_msg->buf = msg->buf; + } else { + i2c_dev->use_dma = true; + } + } } if (!i2c_dev->use_dma) { diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 4f05afab161f..e533460bccc3 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -134,6 +134,8 @@ #define I2C_MST_FIFO_STATUS_TX GENMASK(23, 16) #define I2C_MST_FIFO_STATUS_RX GENMASK(7, 0) +#define I2C_MASTER_RESET_CNTRL 0x0a8 + /* configuration load timeout in microseconds */ #define I2C_CONFIG_LOAD_TIMEOUT 1000000 @@ -184,6 +186,9 @@ enum msg_end_type { * @has_mst_fifo: The I2C controller contains the new MST FIFO interface that * provides additional features and allows for longer messages to * be transferred in one go. + * @has_mst_reset: The I2C controller contains MASTER_RESET_CTRL register which + * provides an alternative to controller reset when configured as + * I2C master * @quirks: I2C adapter quirks for limiting write/read transfer size and not * allowing 0 length transfers. * @supports_bus_clear: Bus Clear support to recover from bus hang during @@ -213,6 +218,7 @@ struct tegra_i2c_hw_feature { bool has_multi_master_mode; bool has_slcg_override_reg; bool has_mst_fifo; + bool has_mst_reset; const struct i2c_adapter_quirks *quirks; bool supports_bus_clear; bool has_apb_dma; @@ -605,6 +611,26 @@ static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev) return 0; } +static int tegra_i2c_master_reset(struct tegra_i2c_dev *i2c_dev) +{ + if (!i2c_dev->hw->has_mst_reset) + return -EOPNOTSUPP; + + /* + * Writing 1 to I2C_MASTER_RESET_CNTRL will reset all internal state of + * Master logic including FIFOs. Clear this bit to 0 for normal operation. + * SW needs to wait for 2us after assertion and de-assertion of this soft + * reset. + */ + i2c_writel(i2c_dev, 0x1, I2C_MASTER_RESET_CNTRL); + fsleep(2); + + i2c_writel(i2c_dev, 0x0, I2C_MASTER_RESET_CNTRL); + fsleep(2); + + return 0; +} + static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) { u32 val, clk_divisor, clk_multiplier, tsu_thd, tlow, thigh, non_hs_mode; @@ -612,6 +638,16 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) int err; /* + * Reset the controller before initializing it. + * In case if device_reset() returns -ENOENT, i.e. when the reset is + * not available, the internal software reset will be used if it is + * supported by the controller. + */ + err = device_reset(i2c_dev->dev); + if (err == -ENOENT) + err = tegra_i2c_master_reset(i2c_dev); + + /* * The reset shouldn't ever fail in practice. The failure will be a * sign of a severe problem that needs to be resolved. Still we don't * want to fail the initialization completely because this may break @@ -619,7 +655,6 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) * emit a noisy warning on error, which won't stay unnoticed and * won't hose machine entirely. */ - err = device_reset(i2c_dev->dev); WARN_ON_ONCE(err); if (IS_DVC(i2c_dev)) @@ -1266,17 +1301,9 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, if (i2c_dev->dma_mode) { if (i2c_dev->msg_read) { - dma_sync_single_for_device(i2c_dev->dma_dev, - i2c_dev->dma_phys, - xfer_size, DMA_FROM_DEVICE); - err = tegra_i2c_dma_submit(i2c_dev, xfer_size); if (err) return err; - } else { - dma_sync_single_for_cpu(i2c_dev->dma_dev, - i2c_dev->dma_phys, - xfer_size, DMA_TO_DEVICE); } } @@ -1286,11 +1313,6 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, if (i2c_dev->dma_mode) { memcpy(i2c_dev->dma_buf + I2C_PACKET_HEADER_SIZE, msg->buf, i2c_dev->msg_len); - - dma_sync_single_for_device(i2c_dev->dma_dev, - i2c_dev->dma_phys, - xfer_size, DMA_TO_DEVICE); - err = tegra_i2c_dma_submit(i2c_dev, xfer_size); if (err) return err; @@ -1331,13 +1353,8 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, return -ETIMEDOUT; } - if (i2c_dev->msg_read && i2c_dev->msg_err == I2C_ERR_NONE) { - dma_sync_single_for_cpu(i2c_dev->dma_dev, - i2c_dev->dma_phys, - xfer_size, DMA_FROM_DEVICE); - + if (i2c_dev->msg_read && i2c_dev->msg_err == I2C_ERR_NONE) memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf, i2c_dev->msg_len); - } } time_left = tegra_i2c_wait_completion(i2c_dev, &i2c_dev->msg_complete, @@ -1468,6 +1485,7 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = { .has_multi_master_mode = false, .has_slcg_override_reg = false, .has_mst_fifo = false, + .has_mst_reset = false, .quirks = &tegra_i2c_quirks, .supports_bus_clear = false, .has_apb_dma = true, @@ -1492,6 +1510,7 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = { .has_multi_master_mode = false, .has_slcg_override_reg = false, .has_mst_fifo = false, + .has_mst_reset = false, .quirks = &tegra_i2c_quirks, .supports_bus_clear = false, .has_apb_dma = true, @@ -1516,6 +1535,7 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = { .has_multi_master_mode = false, .has_slcg_override_reg = false, .has_mst_fifo = false, + .has_mst_reset = false, .quirks = &tegra_i2c_quirks, .supports_bus_clear = true, .has_apb_dma = true, @@ -1540,6 +1560,7 @@ static const struct tegra_i2c_hw_feature tegra124_i2c_hw = { .has_multi_master_mode = false, .has_slcg_override_reg = true, .has_mst_fifo = false, + .has_mst_reset = false, .quirks = &tegra_i2c_quirks, .supports_bus_clear = true, .has_apb_dma = true, @@ -1564,6 +1585,7 @@ static const struct tegra_i2c_hw_feature tegra210_i2c_hw = { .has_multi_master_mode = false, .has_slcg_override_reg = true, .has_mst_fifo = false, + .has_mst_reset = false, .quirks = &tegra_i2c_quirks, .supports_bus_clear = true, .has_apb_dma = true, @@ -1588,6 +1610,7 @@ static const struct tegra_i2c_hw_feature tegra186_i2c_hw = { .has_multi_master_mode = false, .has_slcg_override_reg = true, .has_mst_fifo = false, + .has_mst_reset = false, .quirks = &tegra_i2c_quirks, .supports_bus_clear = true, .has_apb_dma = false, @@ -1612,6 +1635,7 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = { .has_multi_master_mode = true, .has_slcg_override_reg = true, .has_mst_fifo = true, + .has_mst_reset = true, .quirks = &tegra194_i2c_quirks, .supports_bus_clear = true, .has_apb_dma = false, @@ -1625,7 +1649,33 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = { .has_interface_timing_reg = true, }; +static const struct tegra_i2c_hw_feature tegra256_i2c_hw = { + .has_continue_xfer_support = true, + .has_per_pkt_xfer_complete_irq = true, + .clk_divisor_hs_mode = 7, + .clk_divisor_std_mode = 0x7a, + .clk_divisor_fast_mode = 0x40, + .clk_divisor_fast_plus_mode = 0x19, + .has_config_load_reg = true, + .has_multi_master_mode = true, + .has_slcg_override_reg = true, + .has_mst_fifo = true, + .has_mst_reset = true, + .quirks = &tegra194_i2c_quirks, + .supports_bus_clear = true, + .has_apb_dma = false, + .tlow_std_mode = 0x8, + .thigh_std_mode = 0x7, + .tlow_fast_fastplus_mode = 0x3, + .thigh_fast_fastplus_mode = 0x3, + .setup_hold_time_std_mode = 0x08080808, + .setup_hold_time_fast_fast_plus_mode = 0x02020202, + .setup_hold_time_hs_mode = 0x090909, + .has_interface_timing_reg = true, +}; + static const struct of_device_id tegra_i2c_of_match[] = { + { .compatible = "nvidia,tegra256-i2c", .data = &tegra256_i2c_hw, }, { .compatible = "nvidia,tegra194-i2c", .data = &tegra194_i2c_hw, }, { .compatible = "nvidia,tegra186-i2c", .data = &tegra186_i2c_hw, }, #if IS_ENABLED(CONFIG_ARCH_TEGRA_210_SOC) diff --git a/drivers/i2c/busses/i2c-viperboard.c b/drivers/i2c/busses/i2c-viperboard.c index 1bd602852e35..f596efcc291c 100644 --- a/drivers/i2c/busses/i2c-viperboard.c +++ b/drivers/i2c/busses/i2c-viperboard.c @@ -204,7 +204,7 @@ static int vprbrd_i2c_read(struct vprbrd *vb, struct i2c_msg *msg) /* copy the received data */ memcpy(msg->buf + start, rmsg, len1); - /* second read transfer if neccessary */ + /* second read transfer if necessary */ if (len2 > 0) { ret = vprbrd_i2c_receive(vb->usb_dev, rmsg, len2); if (ret < 0) diff --git a/drivers/i2c/i2c-boardinfo.c b/drivers/i2c/i2c-boardinfo.c index 4df8ad092df3..338800321f8b 100644 --- a/drivers/i2c/i2c-boardinfo.c +++ b/drivers/i2c/i2c-boardinfo.c @@ -22,7 +22,7 @@ EXPORT_SYMBOL_GPL(__i2c_board_lock); LIST_HEAD(__i2c_board_list); EXPORT_SYMBOL_GPL(__i2c_board_list); -int __i2c_first_dynamic_bus_num; +int __i2c_first_dynamic_bus_num __ro_after_init; EXPORT_SYMBOL_GPL(__i2c_first_dynamic_bus_num); @@ -48,7 +48,7 @@ EXPORT_SYMBOL_GPL(__i2c_first_dynamic_bus_num); * The board info passed can safely be __initdata, but be careful of embedded * pointers (for platform_data, functions, etc) since that won't be copied. */ -int i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned len) +int __init i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned len) { int status; diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c index 3445cc3b476b..ed90858a27b7 100644 --- a/drivers/i2c/i2c-core-acpi.c +++ b/drivers/i2c/i2c-core-acpi.c @@ -370,6 +370,7 @@ static const struct acpi_device_id i2c_acpi_force_100khz_device_ids[] = { * the device works without issues on Windows at what is expected to be * a 400KHz frequency. The root cause of the issue is not known. */ + { "DLL0945", 0 }, { "ELAN06FA", 0 }, {} }; diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index ecca8c006b02..ae7e9c8b65a6 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -573,7 +573,8 @@ static int i2c_device_probe(struct device *dev) goto err_clear_wakeup_irq; do_power_on = !i2c_acpi_waive_d0_probe(dev); - status = dev_pm_domain_attach(&client->dev, do_power_on ? PD_FLAG_ATTACH_POWER_ON : 0); + status = dev_pm_domain_attach(&client->dev, PD_FLAG_DETACH_POWER_OFF | + (do_power_on ? PD_FLAG_ATTACH_POWER_ON : 0)); if (status) goto err_clear_wakeup_irq; @@ -581,7 +582,7 @@ static int i2c_device_probe(struct device *dev) GFP_KERNEL); if (!client->devres_group_id) { status = -ENOMEM; - goto err_detach_pm_domain; + goto err_clear_wakeup_irq; } client->debugfs = debugfs_create_dir(dev_name(&client->dev), @@ -608,8 +609,6 @@ static int i2c_device_probe(struct device *dev) err_release_driver_resources: debugfs_remove_recursive(client->debugfs); devres_release_group(&client->dev, client->devres_group_id); -err_detach_pm_domain: - dev_pm_domain_detach(&client->dev, do_power_on); err_clear_wakeup_irq: dev_pm_clear_wake_irq(&client->dev); device_init_wakeup(&client->dev, false); @@ -636,8 +635,6 @@ static void i2c_device_remove(struct device *dev) devres_release_group(&client->dev, client->devres_group_id); - dev_pm_domain_detach(&client->dev, true); - dev_pm_clear_wake_irq(&client->dev); device_init_wakeup(&client->dev, false); diff --git a/drivers/i2c/i2c-core-slave.c b/drivers/i2c/i2c-core-slave.c index 7ee6b992b835..02ca55c2246b 100644 --- a/drivers/i2c/i2c-core-slave.c +++ b/drivers/i2c/i2c-core-slave.c @@ -112,10 +112,9 @@ bool i2c_detect_slave_mode(struct device *dev) struct fwnode_handle *fwnode = dev_fwnode(dev); if (is_of_node(fwnode)) { - struct fwnode_handle *child __free(fwnode_handle) = NULL; u32 reg; - fwnode_for_each_child_node(fwnode, child) { + fwnode_for_each_child_node_scoped(fwnode, child) { fwnode_property_read_u32(child, "reg", ®); if (reg & I2C_OWN_SLAVE_ADDRESS) return true; diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c index 4d8690981a55..d59644e50f14 100644 --- a/drivers/i2c/i2c-mux.c +++ b/drivers/i2c/i2c-mux.c @@ -241,12 +241,9 @@ struct i2c_mux_core *i2c_mux_alloc(struct i2c_adapter *parent, muxc->parent = parent; muxc->dev = dev; - if (flags & I2C_MUX_LOCKED) - muxc->mux_locked = true; - if (flags & I2C_MUX_ARBITRATOR) - muxc->arbitrator = true; - if (flags & I2C_MUX_GATE) - muxc->gate = true; + muxc->mux_locked = !!(flags & I2C_MUX_LOCKED); + muxc->arbitrator = !!(flags & I2C_MUX_ARBITRATOR); + muxc->gate = !!(flags & I2C_MUX_GATE); muxc->select = select; muxc->deselect = deselect; muxc->max_adapters = max_adapters; diff --git a/drivers/i2c/muxes/i2c-mux-ltc4306.c b/drivers/i2c/muxes/i2c-mux-ltc4306.c index c688af270a11..50fbc0d06e62 100644 --- a/drivers/i2c/muxes/i2c-mux-ltc4306.c +++ b/drivers/i2c/muxes/i2c-mux-ltc4306.c @@ -164,7 +164,7 @@ static int ltc4306_gpio_init(struct ltc4306 *data) data->gpiochip.direction_input = ltc4306_gpio_direction_input; data->gpiochip.direction_output = ltc4306_gpio_direction_output; data->gpiochip.get = ltc4306_gpio_get; - data->gpiochip.set_rv = ltc4306_gpio_set; + data->gpiochip.set = ltc4306_gpio_set; data->gpiochip.set_config = ltc4306_gpio_set_config; data->gpiochip.owner = THIS_MODULE; diff --git a/drivers/i2c/muxes/i2c-mux-mule.c b/drivers/i2c/muxes/i2c-mux-mule.c index 284ff4afeeac..d3b32b794172 100644 --- a/drivers/i2c/muxes/i2c-mux-mule.c +++ b/drivers/i2c/muxes/i2c-mux-mule.c @@ -47,7 +47,6 @@ static int mule_i2c_mux_probe(struct platform_device *pdev) struct mule_i2c_reg_mux *priv; struct i2c_client *client; struct i2c_mux_core *muxc; - struct device_node *dev; unsigned int readback; int ndev, ret; bool old_fw; @@ -95,7 +94,7 @@ static int mule_i2c_mux_probe(struct platform_device *pdev) "Failed to register mux remove\n"); /* Create device adapters */ - for_each_child_of_node(mux_dev->of_node, dev) { + for_each_child_of_node_scoped(mux_dev->of_node, dev) { u32 reg; ret = of_property_read_u32(dev, "reg", ®); diff --git a/drivers/i2c/muxes/i2c-mux-pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c index 8663c8a7c269..3d8002caf703 100644 --- a/drivers/i2c/muxes/i2c-mux-pca9541.c +++ b/drivers/i2c/muxes/i2c-mux-pca9541.c @@ -63,10 +63,6 @@ #define mybus(x) (!((x) & MYBUS) || ((x) & MYBUS) == MYBUS) #define busoff(x) (!((x) & BUSON) || ((x) & BUSON) == BUSON) -/* arbitration timeouts, in jiffies */ -#define ARB_TIMEOUT (HZ / 8) /* 125 ms until forcing bus ownership */ -#define ARB2_TIMEOUT (HZ / 4) /* 250 ms until acquisition failure */ - /* arbitration retry delays, in us */ #define SELECT_DELAY_SHORT 50 #define SELECT_DELAY_LONG 1000 @@ -229,6 +225,9 @@ static int pca9541_arbitrate(struct i2c_client *client) */ data->select_timeout = SELECT_DELAY_LONG; if (time_is_before_eq_jiffies(data->arb_timeout)) { + dev_warn(&client->dev, + "Arbitration timeout on I2C bus, forcing bus ownership\n"); + /* Time is up, take the bus and reset it. */ pca9541_reg_write(client, PCA9541_CONTROL, @@ -251,10 +250,10 @@ static int pca9541_select_chan(struct i2c_mux_core *muxc, u32 chan) struct pca9541 *data = i2c_mux_priv(muxc); struct i2c_client *client = data->client; int ret; - unsigned long timeout = jiffies + ARB2_TIMEOUT; + unsigned long timeout = jiffies + (2 * client->adapter->timeout); /* give up after this time */ - data->arb_timeout = jiffies + ARB_TIMEOUT; + data->arb_timeout = jiffies + client->adapter->timeout; /* force bus ownership after this time */ do { @@ -267,6 +266,7 @@ static int pca9541_select_chan(struct i2c_mux_core *muxc, u32 chan) else msleep(data->select_timeout / 1000); } while (time_is_after_eq_jiffies(timeout)); + dev_warn(&client->dev, "Failed to acquire I2C bus, timed out\n"); return -ETIMEDOUT; } diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c index b9f370c9f018..75c8d08fa24e 100644 --- a/drivers/i2c/muxes/i2c-mux-pca954x.c +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c @@ -118,7 +118,6 @@ struct pca954x { raw_spinlock_t lock; struct regulator *supply; - struct gpio_desc *reset_gpio; struct reset_control *reset_cont; }; @@ -316,6 +315,25 @@ static u8 pca954x_regval(struct pca954x *data, u8 chan) return 1 << chan; } +static void pca954x_reset_assert(struct pca954x *data) +{ + if (data->reset_cont) + reset_control_assert(data->reset_cont); +} + +static void pca954x_reset_deassert(struct pca954x *data) +{ + if (data->reset_cont) + reset_control_deassert(data->reset_cont); +} + +static void pca954x_reset_mux(struct pca954x *data) +{ + pca954x_reset_assert(data); + udelay(1); + pca954x_reset_deassert(data); +} + static int pca954x_select_chan(struct i2c_mux_core *muxc, u32 chan) { struct pca954x *data = i2c_mux_priv(muxc); @@ -329,6 +347,8 @@ static int pca954x_select_chan(struct i2c_mux_core *muxc, u32 chan) ret = pca954x_reg_write(muxc->parent, client, regval); data->last_chan = ret < 0 ? 0 : regval; } + if (ret == -ETIMEDOUT && data->reset_cont) + pca954x_reset_mux(data); return ret; } @@ -338,6 +358,7 @@ static int pca954x_deselect_mux(struct i2c_mux_core *muxc, u32 chan) struct pca954x *data = i2c_mux_priv(muxc); struct i2c_client *client = data->client; s32 idle_state; + int ret = 0; idle_state = READ_ONCE(data->idle_state); if (idle_state >= 0) @@ -347,8 +368,10 @@ static int pca954x_deselect_mux(struct i2c_mux_core *muxc, u32 chan) if (idle_state == MUX_IDLE_DISCONNECT) { /* Deselect active channel */ data->last_chan = 0; - return pca954x_reg_write(muxc->parent, client, - data->last_chan); + ret = pca954x_reg_write(muxc->parent, client, + data->last_chan); + if (ret == -ETIMEDOUT && data->reset_cont) + pca954x_reset_mux(data); } /* otherwise leave as-is */ @@ -527,29 +550,10 @@ static int pca954x_get_reset(struct device *dev, struct pca954x *data) if (IS_ERR(data->reset_cont)) return dev_err_probe(dev, PTR_ERR(data->reset_cont), "Failed to get reset\n"); - else if (data->reset_cont) - return 0; - - /* - * fallback to legacy reset-gpios - */ - data->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); - if (IS_ERR(data->reset_gpio)) { - return dev_err_probe(dev, PTR_ERR(data->reset_gpio), - "Failed to get reset gpio"); - } return 0; } -static void pca954x_reset_deassert(struct pca954x *data) -{ - if (data->reset_cont) - reset_control_deassert(data->reset_cont); - else - gpiod_set_value_cansleep(data->reset_gpio, 0); -} - /* * I2C init/probing/exit functions */ @@ -589,7 +593,7 @@ static int pca954x_probe(struct i2c_client *client) if (ret) goto fail_cleanup; - if (data->reset_cont || data->reset_gpio) { + if (data->reset_cont) { udelay(1); pca954x_reset_deassert(data); /* Give the chip some time to recover. */ |