summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses')
-rw-r--r--drivers/i2c/busses/Kconfig2
-rw-r--r--drivers/i2c/busses/i2c-ali1563.c2
-rw-r--r--drivers/i2c/busses/i2c-altera.c9
-rw-r--r--drivers/i2c/busses/i2c-cadence.c2
-rw-r--r--drivers/i2c/busses/i2c-designware-master.c2
-rw-r--r--drivers/i2c/busses/i2c-eg20t.c3
-rw-r--r--drivers/i2c/busses/i2c-i801.c6
-rw-r--r--drivers/i2c/busses/i2c-icy.c1
-rw-r--r--drivers/i2c/busses/i2c-mpc.c81
-rw-r--r--drivers/i2c/busses/i2c-mt65xx.c5
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c2
-rw-r--r--drivers/i2c/busses/i2c-ocores.c8
-rw-r--r--drivers/i2c/busses/i2c-pnx.c8
-rw-r--r--drivers/i2c/busses/i2c-qcom-geni.c23
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c3
-rw-r--r--drivers/i2c/busses/i2c-sh_mobile.c2
-rw-r--r--drivers/i2c/busses/i2c-st.c4
-rw-r--r--drivers/i2c/busses/i2c-stm32f4.c2
-rw-r--r--drivers/i2c/busses/i2c-tegra-bpmp.c4
19 files changed, 135 insertions, 34 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 281a65d9b44b..10acece9d7b9 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -647,7 +647,7 @@ config I2C_HIGHLANDER
config I2C_HISI
tristate "HiSilicon I2C controller"
- depends on ARM64 || COMPILE_TEST
+ depends on (ARM64 && ACPI) || COMPILE_TEST
help
Say Y here if you want to have Hisilicon I2C controller support
available on the Kunpeng Server.
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index 4d12e3da12f0..55a9e93fbfeb 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-only
-/**
+/*
* i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge
*
* Copyright (C) 2004 Patrick Mochel
diff --git a/drivers/i2c/busses/i2c-altera.c b/drivers/i2c/busses/i2c-altera.c
index 7d62cbda6e06..354cf7e45c4a 100644
--- a/drivers/i2c/busses/i2c-altera.c
+++ b/drivers/i2c/busses/i2c-altera.c
@@ -55,7 +55,7 @@
#define ALTR_I2C_XFER_TIMEOUT (msecs_to_jiffies(250))
/**
- * altr_i2c_dev - I2C device context
+ * struct altr_i2c_dev - I2C device context
* @base: pointer to register struct
* @msg: pointer to current message
* @msg_len: number of bytes transferred in msg
@@ -172,7 +172,7 @@ static void altr_i2c_init(struct altr_i2c_dev *idev)
altr_i2c_int_enable(idev, ALTR_I2C_ALL_IRQ, false);
}
-/**
+/*
* altr_i2c_transfer - On the last byte to be transmitted, send
* a Stop bit on the last byte.
*/
@@ -185,7 +185,7 @@ static void altr_i2c_transfer(struct altr_i2c_dev *idev, u32 data)
writel(data, idev->base + ALTR_I2C_TFR_CMD);
}
-/**
+/*
* altr_i2c_empty_rx_fifo - Fetch data from RX FIFO until end of
* transfer. Send a Stop bit on the last byte.
*/
@@ -201,9 +201,8 @@ static void altr_i2c_empty_rx_fifo(struct altr_i2c_dev *idev)
}
}
-/**
+/*
* altr_i2c_fill_tx_fifo - Fill TX FIFO from current message buffer.
- * @return: Number of bytes left to transfer.
*/
static int altr_i2c_fill_tx_fifo(struct altr_i2c_dev *idev)
{
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index c1bbc4caeb5c..66aafa7d1123 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -144,7 +144,7 @@ enum cdns_i2c_mode {
};
/**
- * enum cdns_i2c_slave_mode - Slave state when I2C is operating in slave mode
+ * enum cdns_i2c_slave_state - Slave state when I2C is operating in slave mode
*
* @CDNS_I2C_SLAVE_STATE_IDLE: I2C slave idle
* @CDNS_I2C_SLAVE_STATE_SEND: I2C slave sending data to master
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 13be1d678c39..9b08bb5df38d 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -165,7 +165,7 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
}
/**
- * i2c_dw_init() - Initialize the designware I2C master hardware
+ * i2c_dw_init_master() - Initialize the designware I2C master hardware
* @dev: device private data
*
* This functions configures and enables the I2C master.
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index 843b31a0f752..321b2770feab 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -148,7 +148,7 @@ struct i2c_algo_pch_data {
/**
* struct adapter_info - This structure holds the adapter information for the
- PCH i2c controller
+ * PCH i2c controller
* @pch_data: stores a list of i2c_algo_pch_data
* @pch_i2c_suspended: specifies whether the system is suspended or not
* perhaps with more lines and words.
@@ -358,6 +358,7 @@ static void pch_i2c_repstart(struct i2c_algo_pch_data *adap)
/**
* pch_i2c_writebytes() - write data to I2C bus in normal mode
* @i2c_adap: Pointer to the struct i2c_adapter.
+ * @msgs: Pointer to the i2c message structure.
* @last: specifies whether last message or not.
* In the case of compound mode it will be 1 for last message,
* otherwise 0.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 99d446763530..f9e1c2ceaac0 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -395,11 +395,9 @@ static int i801_check_post(struct i801_priv *priv, int status)
dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
/* try to stop the current command */
dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
- outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL,
- SMBHSTCNT(priv));
+ outb_p(SMBHSTCNT_KILL, SMBHSTCNT(priv));
usleep_range(1000, 2000);
- outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL),
- SMBHSTCNT(priv));
+ outb_p(0, SMBHSTCNT(priv));
/* Check if it worked */
status = inb_p(SMBHSTSTS(priv));
diff --git a/drivers/i2c/busses/i2c-icy.c b/drivers/i2c/busses/i2c-icy.c
index c8c422e9dda4..5dae7cab7260 100644
--- a/drivers/i2c/busses/i2c-icy.c
+++ b/drivers/i2c/busses/i2c-icy.c
@@ -123,7 +123,6 @@ static int icy_probe(struct zorro_dev *z,
{
struct icy_i2c *i2c;
struct i2c_algo_pcf_data *algo_data;
- struct fwnode_handle *new_fwnode;
struct i2c_board_info ltc2990_info = {
.type = "ltc2990",
.swnode = &icy_ltc2990_node,
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 30d9e89a3db2..dcca9c2396db 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -19,6 +19,7 @@
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/fsl_devices.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
@@ -45,6 +46,7 @@
#define CCR_MTX 0x10
#define CCR_TXAK 0x08
#define CCR_RSTA 0x04
+#define CCR_RSVD 0x02
#define CSR_MCF 0x80
#define CSR_MAAS 0x40
@@ -97,7 +99,7 @@ struct mpc_i2c {
u32 block;
int rc;
int expect_rxack;
-
+ bool has_errata_A004447;
};
struct mpc_i2c_divider {
@@ -136,6 +138,75 @@ static void mpc_i2c_fixup(struct mpc_i2c *i2c)
}
}
+static int i2c_mpc_wait_sr(struct mpc_i2c *i2c, int mask)
+{
+ void __iomem *addr = i2c->base + MPC_I2C_SR;
+ u8 val;
+
+ return readb_poll_timeout(addr, val, val & mask, 0, 100);
+}
+
+/*
+ * Workaround for Erratum A004447. From the P2040CE Rev Q
+ *
+ * 1. Set up the frequency divider and sampling rate.
+ * 2. I2CCR - a0h
+ * 3. Poll for I2CSR[MBB] to get set.
+ * 4. If I2CSR[MAL] is set (an indication that SDA is stuck low), then go to
+ * step 5. If MAL is not set, then go to step 13.
+ * 5. I2CCR - 00h
+ * 6. I2CCR - 22h
+ * 7. I2CCR - a2h
+ * 8. Poll for I2CSR[MBB] to get set.
+ * 9. Issue read to I2CDR.
+ * 10. Poll for I2CSR[MIF] to be set.
+ * 11. I2CCR - 82h
+ * 12. Workaround complete. Skip the next steps.
+ * 13. Issue read to I2CDR.
+ * 14. Poll for I2CSR[MIF] to be set.
+ * 15. I2CCR - 80h
+ */
+static void mpc_i2c_fixup_A004447(struct mpc_i2c *i2c)
+{
+ int ret;
+ u32 val;
+
+ writeccr(i2c, CCR_MEN | CCR_MSTA);
+ ret = i2c_mpc_wait_sr(i2c, CSR_MBB);
+ if (ret) {
+ dev_err(i2c->dev, "timeout waiting for CSR_MBB\n");
+ return;
+ }
+
+ val = readb(i2c->base + MPC_I2C_SR);
+
+ if (val & CSR_MAL) {
+ writeccr(i2c, 0x00);
+ writeccr(i2c, CCR_MSTA | CCR_RSVD);
+ writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSVD);
+ ret = i2c_mpc_wait_sr(i2c, CSR_MBB);
+ if (ret) {
+ dev_err(i2c->dev, "timeout waiting for CSR_MBB\n");
+ return;
+ }
+ val = readb(i2c->base + MPC_I2C_DR);
+ ret = i2c_mpc_wait_sr(i2c, CSR_MIF);
+ if (ret) {
+ dev_err(i2c->dev, "timeout waiting for CSR_MIF\n");
+ return;
+ }
+ writeccr(i2c, CCR_MEN | CCR_RSVD);
+ } else {
+ val = readb(i2c->base + MPC_I2C_DR);
+ ret = i2c_mpc_wait_sr(i2c, CSR_MIF);
+ if (ret) {
+ dev_err(i2c->dev, "timeout waiting for CSR_MIF\n");
+ return;
+ }
+ writeccr(i2c, CCR_MEN);
+ }
+}
+
#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
@@ -670,7 +741,10 @@ static int fsl_i2c_bus_recovery(struct i2c_adapter *adap)
{
struct mpc_i2c *i2c = i2c_get_adapdata(adap);
- mpc_i2c_fixup(i2c);
+ if (i2c->has_errata_A004447)
+ mpc_i2c_fixup_A004447(i2c);
+ else
+ mpc_i2c_fixup(i2c);
return 0;
}
@@ -767,6 +841,9 @@ static int fsl_i2c_probe(struct platform_device *op)
}
dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
+ if (of_property_read_bool(op->dev.of_node, "fsl,i2c-erratum-a004447"))
+ i2c->has_errata_A004447 = true;
+
i2c->adap = mpc_ops;
scnprintf(i2c->adap.name, sizeof(i2c->adap.name),
"MPC adapter (%s)", of_node_full_name(op->dev.of_node));
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 5ddfa4e56ee2..4e9fb6b44436 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -479,6 +479,11 @@ static void mtk_i2c_clock_disable(struct mtk_i2c *i2c)
static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
{
u16 control_reg;
+ u16 intr_stat_reg;
+
+ mtk_i2c_writew(i2c, I2C_CHN_CLR_FLAG, OFFSET_START);
+ intr_stat_reg = mtk_i2c_readw(i2c, OFFSET_INTR_STAT);
+ mtk_i2c_writew(i2c, intr_stat_reg, OFFSET_INTR_STAT);
if (i2c->dev_comp->apdma_sync) {
writel(I2C_DMA_WARM_RST, i2c->pdmabase + OFFSET_RST);
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index dc77e1c4e80f..a2d12a5b1c34 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -159,7 +159,7 @@ struct i2c_nmk_client {
* @clk_freq: clock frequency for the operation mode
* @tft: Tx FIFO Threshold in bytes
* @rft: Rx FIFO Threshold in bytes
- * @timeout Slave response timeout (ms)
+ * @timeout: Slave response timeout (ms)
* @sm: speed mode
* @stop: stop condition.
* @xfer_complete: acknowledge completion for a I2C message.
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 273222e38056..a0af027db04c 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -250,7 +250,7 @@ static irqreturn_t ocores_isr(int irq, void *dev_id)
}
/**
- * Process timeout event
+ * ocores_process_timeout() - Process timeout event
* @i2c: ocores I2C device instance
*/
static void ocores_process_timeout(struct ocores_i2c *i2c)
@@ -264,7 +264,7 @@ static void ocores_process_timeout(struct ocores_i2c *i2c)
}
/**
- * Wait until something change in a given register
+ * ocores_wait() - Wait until something change in a given register
* @i2c: ocores I2C device instance
* @reg: register to query
* @mask: bitmask to apply on register value
@@ -296,7 +296,7 @@ static int ocores_wait(struct ocores_i2c *i2c,
}
/**
- * Wait until is possible to process some data
+ * ocores_poll_wait() - Wait until is possible to process some data
* @i2c: ocores I2C device instance
*
* Used when the device is in polling mode (interrupts disabled).
@@ -334,7 +334,7 @@ static int ocores_poll_wait(struct ocores_i2c *i2c)
}
/**
- * It handles an IRQ-less transfer
+ * ocores_process_polling() - It handles an IRQ-less transfer
* @i2c: ocores I2C device instance
*
* Even if IRQ are disabled, the I2C OpenCore IP behavior is exactly the same
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 8c4ec7f13f5a..50f21cdbe90d 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -138,7 +138,7 @@ static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data)
/**
* i2c_pnx_start - start a device
* @slave_addr: slave address
- * @adap: pointer to adapter structure
+ * @alg_data: pointer to local driver data structure
*
* Generate a START signal in the desired mode.
*/
@@ -194,7 +194,7 @@ static int i2c_pnx_start(unsigned char slave_addr,
/**
* i2c_pnx_stop - stop a device
- * @adap: pointer to I2C adapter structure
+ * @alg_data: pointer to local driver data structure
*
* Generate a STOP signal to terminate the master transaction.
*/
@@ -223,7 +223,7 @@ static void i2c_pnx_stop(struct i2c_pnx_algo_data *alg_data)
/**
* i2c_pnx_master_xmit - transmit data to slave
- * @adap: pointer to I2C adapter structure
+ * @alg_data: pointer to local driver data structure
*
* Sends one byte of data to the slave
*/
@@ -293,7 +293,7 @@ static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data)
/**
* i2c_pnx_master_rcv - receive data from slave
- * @adap: pointer to I2C adapter structure
+ * @alg_data: pointer to local driver data structure
*
* Reads one byte data from the slave
*/
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 214b4c913a13..6d635a7c104c 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -100,7 +100,7 @@ static const struct geni_i2c_err_log gi2c_log[] = {
[GP_IRQ0] = {-EIO, "Unknown I2C err GP_IRQ0"},
[NACK] = {-ENXIO, "NACK: slv unresponsive, check its power/reset-ln"},
[GP_IRQ2] = {-EIO, "Unknown I2C err GP IRQ2"},
- [BUS_PROTO] = {-EPROTO, "Bus proto err, noisy/unepxected start/stop"},
+ [BUS_PROTO] = {-EPROTO, "Bus proto err, noisy/unexpected start/stop"},
[ARB_LOST] = {-EAGAIN, "Bus arbitration lost, clock line undriveable"},
[GP_IRQ5] = {-EIO, "Unknown I2C err GP IRQ5"},
[GENI_OVERRUN] = {-EIO, "Cmd overrun, check GENI cmd-state machine"},
@@ -650,6 +650,14 @@ static int geni_i2c_remove(struct platform_device *pdev)
return 0;
}
+static void geni_i2c_shutdown(struct platform_device *pdev)
+{
+ struct geni_i2c_dev *gi2c = platform_get_drvdata(pdev);
+
+ /* Make client i2c transfers start failing */
+ i2c_mark_adapter_suspended(&gi2c->adap);
+}
+
static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
{
int ret;
@@ -690,6 +698,8 @@ static int __maybe_unused geni_i2c_suspend_noirq(struct device *dev)
{
struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
+ i2c_mark_adapter_suspended(&gi2c->adap);
+
if (!gi2c->suspended) {
geni_i2c_runtime_suspend(dev);
pm_runtime_disable(dev);
@@ -699,8 +709,16 @@ static int __maybe_unused geni_i2c_suspend_noirq(struct device *dev)
return 0;
}
+static int __maybe_unused geni_i2c_resume_noirq(struct device *dev)
+{
+ struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
+
+ i2c_mark_adapter_resumed(&gi2c->adap);
+ return 0;
+}
+
static const struct dev_pm_ops geni_i2c_pm_ops = {
- SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(geni_i2c_suspend_noirq, NULL)
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(geni_i2c_suspend_noirq, geni_i2c_resume_noirq)
SET_RUNTIME_PM_OPS(geni_i2c_runtime_suspend, geni_i2c_runtime_resume,
NULL)
};
@@ -714,6 +732,7 @@ MODULE_DEVICE_TABLE(of, geni_i2c_dt_match);
static struct platform_driver geni_i2c_driver = {
.probe = geni_i2c_probe,
.remove = geni_i2c_remove,
+ .shutdown = geni_i2c_shutdown,
.driver = {
.name = "geni_i2c",
.pm = &geni_i2c_pm_ops,
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index ab928613afba..4d82761e1585 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -480,7 +480,10 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
* forces us to send a new START
* when we change direction
*/
+ dev_dbg(i2c->dev,
+ "missing START before write->read\n");
s3c24xx_i2c_stop(i2c, -EINVAL);
+ break;
}
goto retry_write;
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 3ae6ca21a02c..2d2e630fd438 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -807,7 +807,7 @@ static const struct sh_mobile_dt_config r8a7740_dt_config = {
static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
{ .compatible = "renesas,iic-r8a73a4", .data = &fast_clock_dt_config },
{ .compatible = "renesas,iic-r8a7740", .data = &r8a7740_dt_config },
- { .compatible = "renesas,iic-r8a774c0", .data = &fast_clock_dt_config },
+ { .compatible = "renesas,iic-r8a774c0", .data = &v2_freq_calc_dt_config },
{ .compatible = "renesas,iic-r8a7790", .data = &v2_freq_calc_dt_config },
{ .compatible = "renesas,iic-r8a7791", .data = &v2_freq_calc_dt_config },
{ .compatible = "renesas,iic-r8a7792", .data = &v2_freq_calc_dt_config },
diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index faa81a95551f..88482316d22a 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -524,7 +524,7 @@ static void st_i2c_handle_write(struct st_i2c_dev *i2c_dev)
}
/**
- * st_i2c_handle_write() - Handle FIFO enmpty interrupt in case of read
+ * st_i2c_handle_read() - Handle FIFO empty interrupt in case of read
* @i2c_dev: Controller's private data
*/
static void st_i2c_handle_read(struct st_i2c_dev *i2c_dev)
@@ -558,7 +558,7 @@ static void st_i2c_handle_read(struct st_i2c_dev *i2c_dev)
}
/**
- * st_i2c_isr() - Interrupt routine
+ * st_i2c_isr_thread() - Interrupt routine
* @irq: interrupt number
* @data: Controller's private data
*/
diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c
index 4933fc8ce3fd..eebce7ecef25 100644
--- a/drivers/i2c/busses/i2c-stm32f4.c
+++ b/drivers/i2c/busses/i2c-stm32f4.c
@@ -313,7 +313,7 @@ static int stm32f4_i2c_wait_free_bus(struct stm32f4_i2c_dev *i2c_dev)
}
/**
- * stm32f4_i2c_write_ byte() - Write a byte in the data register
+ * stm32f4_i2c_write_byte() - Write a byte in the data register
* @i2c_dev: Controller's private data
* @byte: Data to write in the register
*/
diff --git a/drivers/i2c/busses/i2c-tegra-bpmp.c b/drivers/i2c/busses/i2c-tegra-bpmp.c
index 3680d608698b..ec0c7cad4240 100644
--- a/drivers/i2c/busses/i2c-tegra-bpmp.c
+++ b/drivers/i2c/busses/i2c-tegra-bpmp.c
@@ -65,7 +65,7 @@ static void tegra_bpmp_xlate_flags(u16 flags, u16 *out)
*out |= SERIALI2C_RECV_LEN;
}
-/**
+/*
* The serialized I2C format is simply the following:
* [addr little-endian][flags little-endian][len little-endian][data if write]
* [addr little-endian][flags little-endian][len little-endian][data if write]
@@ -109,7 +109,7 @@ static void tegra_bpmp_serialize_i2c_msg(struct tegra_bpmp_i2c *i2c,
request->xfer.data_size = pos;
}
-/**
+/*
* The data in the BPMP -> CPU direction is composed of sequential blocks for
* those messages that have I2C_M_RD. So, for example, if you have:
*