diff options
Diffstat (limited to 'drivers/hwmon/jc42.c')
-rw-r--r-- | drivers/hwmon/jc42.c | 273 |
1 files changed, 155 insertions, 118 deletions
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c index 30888feaf589..8523bf974310 100644 --- a/drivers/hwmon/jc42.c +++ b/drivers/hwmon/jc42.c @@ -10,6 +10,7 @@ */ #include <linux/bitops.h> +#include <linux/bitfield.h> #include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> @@ -19,6 +20,7 @@ #include <linux/err.h> #include <linux/mutex.h> #include <linux/of.h> +#include <linux/regmap.h> /* Addresses to scan */ static const unsigned short normal_i2c[] = { @@ -36,20 +38,19 @@ static const unsigned short normal_i2c[] = { #define JC42_REG_SMBUS 0x22 /* NXP and Atmel, possibly others? */ /* Status bits in temperature register */ -#define JC42_ALARM_CRIT_BIT 15 -#define JC42_ALARM_MAX_BIT 14 -#define JC42_ALARM_MIN_BIT 13 +#define JC42_ALARM_CRIT BIT(15) +#define JC42_ALARM_MAX BIT(14) +#define JC42_ALARM_MIN BIT(13) /* Configuration register defines */ -#define JC42_CFG_CRIT_ONLY (1 << 2) -#define JC42_CFG_TCRIT_LOCK (1 << 6) -#define JC42_CFG_EVENT_LOCK (1 << 7) -#define JC42_CFG_SHUTDOWN (1 << 8) -#define JC42_CFG_HYST_SHIFT 9 -#define JC42_CFG_HYST_MASK (0x03 << 9) +#define JC42_CFG_CRIT_ONLY BIT(2) +#define JC42_CFG_TCRIT_LOCK BIT(6) +#define JC42_CFG_EVENT_LOCK BIT(7) +#define JC42_CFG_SHUTDOWN BIT(8) +#define JC42_CFG_HYST_MASK GENMASK(10, 9) /* Capabilities */ -#define JC42_CAP_RANGE (1 << 2) +#define JC42_CAP_RANGE BIT(2) /* Manufacturer IDs */ #define ADT_MANID 0x11d4 /* Analog Devices */ @@ -199,31 +200,14 @@ static struct jc42_chips jc42_chips[] = { { STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK }, }; -enum temp_index { - t_input = 0, - t_crit, - t_min, - t_max, - t_num_temp -}; - -static const u8 temp_regs[t_num_temp] = { - [t_input] = JC42_REG_TEMP, - [t_crit] = JC42_REG_TEMP_CRITICAL, - [t_min] = JC42_REG_TEMP_LOWER, - [t_max] = JC42_REG_TEMP_UPPER, -}; - /* Each client has this additional data */ struct jc42_data { - struct i2c_client *client; struct mutex update_lock; /* protect register access */ + struct regmap *regmap; bool extended; /* true if extended range supported */ bool valid; - unsigned long last_updated; /* In jiffies */ u16 orig_config; /* original configuration */ u16 config; /* current configuration */ - u16 temp[t_num_temp];/* Temperatures */ }; #define JC42_TEMP_MIN_EXTENDED (-40000) @@ -248,85 +232,102 @@ static int jc42_temp_from_reg(s16 reg) return reg * 125 / 2; } -static struct jc42_data *jc42_update_device(struct device *dev) -{ - struct jc42_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - struct jc42_data *ret = data; - int i, val; - - mutex_lock(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { - for (i = 0; i < t_num_temp; i++) { - val = i2c_smbus_read_word_swapped(client, temp_regs[i]); - if (val < 0) { - ret = ERR_PTR(val); - goto abort; - } - data->temp[i] = val; - } - data->last_updated = jiffies; - data->valid = true; - } -abort: - mutex_unlock(&data->update_lock); - return ret; -} - static int jc42_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long *val) { - struct jc42_data *data = jc42_update_device(dev); - int temp, hyst; + struct jc42_data *data = dev_get_drvdata(dev); + unsigned int regval; + int ret, temp, hyst; - if (IS_ERR(data)) - return PTR_ERR(data); + mutex_lock(&data->update_lock); switch (attr) { case hwmon_temp_input: - *val = jc42_temp_from_reg(data->temp[t_input]); - return 0; + ret = regmap_read(data->regmap, JC42_REG_TEMP, ®val); + if (ret) + break; + + *val = jc42_temp_from_reg(regval); + break; case hwmon_temp_min: - *val = jc42_temp_from_reg(data->temp[t_min]); - return 0; + ret = regmap_read(data->regmap, JC42_REG_TEMP_LOWER, ®val); + if (ret) + break; + + *val = jc42_temp_from_reg(regval); + break; case hwmon_temp_max: - *val = jc42_temp_from_reg(data->temp[t_max]); - return 0; + ret = regmap_read(data->regmap, JC42_REG_TEMP_UPPER, ®val); + if (ret) + break; + + *val = jc42_temp_from_reg(regval); + break; case hwmon_temp_crit: - *val = jc42_temp_from_reg(data->temp[t_crit]); - return 0; + ret = regmap_read(data->regmap, JC42_REG_TEMP_CRITICAL, + ®val); + if (ret) + break; + + *val = jc42_temp_from_reg(regval); + break; case hwmon_temp_max_hyst: - temp = jc42_temp_from_reg(data->temp[t_max]); - hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK) - >> JC42_CFG_HYST_SHIFT]; + ret = regmap_read(data->regmap, JC42_REG_TEMP_UPPER, ®val); + if (ret) + break; + + temp = jc42_temp_from_reg(regval); + hyst = jc42_hysteresis[FIELD_GET(JC42_CFG_HYST_MASK, + data->config)]; *val = temp - hyst; - return 0; + break; case hwmon_temp_crit_hyst: - temp = jc42_temp_from_reg(data->temp[t_crit]); - hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK) - >> JC42_CFG_HYST_SHIFT]; + ret = regmap_read(data->regmap, JC42_REG_TEMP_CRITICAL, + ®val); + if (ret) + break; + + temp = jc42_temp_from_reg(regval); + hyst = jc42_hysteresis[FIELD_GET(JC42_CFG_HYST_MASK, + data->config)]; *val = temp - hyst; - return 0; + break; case hwmon_temp_min_alarm: - *val = (data->temp[t_input] >> JC42_ALARM_MIN_BIT) & 1; - return 0; + ret = regmap_read(data->regmap, JC42_REG_TEMP, ®val); + if (ret) + break; + + *val = FIELD_GET(JC42_ALARM_MIN, regval); + break; case hwmon_temp_max_alarm: - *val = (data->temp[t_input] >> JC42_ALARM_MAX_BIT) & 1; - return 0; + ret = regmap_read(data->regmap, JC42_REG_TEMP, ®val); + if (ret) + break; + + *val = FIELD_GET(JC42_ALARM_MAX, regval); + break; case hwmon_temp_crit_alarm: - *val = (data->temp[t_input] >> JC42_ALARM_CRIT_BIT) & 1; - return 0; + ret = regmap_read(data->regmap, JC42_REG_TEMP, ®val); + if (ret) + break; + + *val = FIELD_GET(JC42_ALARM_CRIT, regval); + break; default: - return -EOPNOTSUPP; + ret = -EOPNOTSUPP; + break; } + + mutex_unlock(&data->update_lock); + + return ret; } static int jc42_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long val) { struct jc42_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; + unsigned int regval; int diff, hyst; int ret; @@ -334,21 +335,23 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type, switch (attr) { case hwmon_temp_min: - data->temp[t_min] = jc42_temp_to_reg(val, data->extended); - ret = i2c_smbus_write_word_swapped(client, temp_regs[t_min], - data->temp[t_min]); + ret = regmap_write(data->regmap, JC42_REG_TEMP_LOWER, + jc42_temp_to_reg(val, data->extended)); break; case hwmon_temp_max: - data->temp[t_max] = jc42_temp_to_reg(val, data->extended); - ret = i2c_smbus_write_word_swapped(client, temp_regs[t_max], - data->temp[t_max]); + ret = regmap_write(data->regmap, JC42_REG_TEMP_UPPER, + jc42_temp_to_reg(val, data->extended)); break; case hwmon_temp_crit: - data->temp[t_crit] = jc42_temp_to_reg(val, data->extended); - ret = i2c_smbus_write_word_swapped(client, temp_regs[t_crit], - data->temp[t_crit]); + ret = regmap_write(data->regmap, JC42_REG_TEMP_CRITICAL, + jc42_temp_to_reg(val, data->extended)); break; case hwmon_temp_crit_hyst: + ret = regmap_read(data->regmap, JC42_REG_TEMP_CRITICAL, + ®val); + if (ret) + break; + /* * JC42.4 compliant chips only support four hysteresis values. * Pick best choice and go from there. @@ -356,7 +359,7 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type, val = clamp_val(val, (data->extended ? JC42_TEMP_MIN_EXTENDED : JC42_TEMP_MIN) - 6000, JC42_TEMP_MAX); - diff = jc42_temp_from_reg(data->temp[t_crit]) - val; + diff = jc42_temp_from_reg(regval) - val; hyst = 0; if (diff > 0) { if (diff < 2250) @@ -367,10 +370,9 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type, hyst = 3; /* 6.0 degrees C */ } data->config = (data->config & ~JC42_CFG_HYST_MASK) | - (hyst << JC42_CFG_HYST_SHIFT); - ret = i2c_smbus_write_word_swapped(data->client, - JC42_REG_CONFIG, - data->config); + FIELD_PREP(JC42_CFG_HYST_MASK, hyst); + ret = regmap_write(data->regmap, JC42_REG_CONFIG, + data->config); break; default: ret = -EOPNOTSUPP; @@ -470,51 +472,80 @@ static const struct hwmon_chip_info jc42_chip_info = { .info = jc42_info, }; +static bool jc42_readable_reg(struct device *dev, unsigned int reg) +{ + return (reg >= JC42_REG_CAP && reg <= JC42_REG_DEVICEID) || + reg == JC42_REG_SMBUS; +} + +static bool jc42_writable_reg(struct device *dev, unsigned int reg) +{ + return (reg >= JC42_REG_CONFIG && reg <= JC42_REG_TEMP_CRITICAL) || + reg == JC42_REG_SMBUS; +} + +static bool jc42_volatile_reg(struct device *dev, unsigned int reg) +{ + return reg == JC42_REG_CONFIG || reg == JC42_REG_TEMP; +} + +static const struct regmap_config jc42_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .val_format_endian = REGMAP_ENDIAN_BIG, + .max_register = JC42_REG_SMBUS, + .writeable_reg = jc42_writable_reg, + .readable_reg = jc42_readable_reg, + .volatile_reg = jc42_volatile_reg, + .cache_type = REGCACHE_RBTREE, +}; + static int jc42_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct device *hwmon_dev; + unsigned int config, cap; struct jc42_data *data; - int config, cap; + int ret; data = devm_kzalloc(dev, sizeof(struct jc42_data), GFP_KERNEL); if (!data) return -ENOMEM; - data->client = client; + data->regmap = devm_regmap_init_i2c(client, &jc42_regmap_config); + if (IS_ERR(data->regmap)) + return PTR_ERR(data->regmap); + i2c_set_clientdata(client, data); mutex_init(&data->update_lock); - cap = i2c_smbus_read_word_swapped(client, JC42_REG_CAP); - if (cap < 0) - return cap; + ret = regmap_read(data->regmap, JC42_REG_CAP, &cap); + if (ret) + return ret; data->extended = !!(cap & JC42_CAP_RANGE); if (device_property_read_bool(dev, "smbus-timeout-disable")) { - int smbus; - /* * Not all chips support this register, but from a * quick read of various datasheets no chip appears * incompatible with the below attempt to disable * the timeout. And the whole thing is opt-in... */ - smbus = i2c_smbus_read_word_swapped(client, JC42_REG_SMBUS); - if (smbus < 0) - return smbus; - i2c_smbus_write_word_swapped(client, JC42_REG_SMBUS, - smbus | SMBUS_STMOUT); + ret = regmap_set_bits(data->regmap, JC42_REG_SMBUS, + SMBUS_STMOUT); + if (ret) + return ret; } - config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG); - if (config < 0) - return config; + ret = regmap_read(data->regmap, JC42_REG_CONFIG, &config); + if (ret) + return ret; data->orig_config = config; if (config & JC42_CFG_SHUTDOWN) { config &= ~JC42_CFG_SHUTDOWN; - i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config); + regmap_write(data->regmap, JC42_REG_CONFIG, config); } data->config = config; @@ -535,7 +566,7 @@ static void jc42_remove(struct i2c_client *client) config = (data->orig_config & ~JC42_CFG_HYST_MASK) | (data->config & JC42_CFG_HYST_MASK); - i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config); + regmap_write(data->regmap, JC42_REG_CONFIG, config); } } @@ -546,8 +577,11 @@ static int jc42_suspend(struct device *dev) struct jc42_data *data = dev_get_drvdata(dev); data->config |= JC42_CFG_SHUTDOWN; - i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG, - data->config); + regmap_write(data->regmap, JC42_REG_CONFIG, data->config); + + regcache_cache_only(data->regmap, true); + regcache_mark_dirty(data->regmap); + return 0; } @@ -555,10 +589,13 @@ static int jc42_resume(struct device *dev) { struct jc42_data *data = dev_get_drvdata(dev); + regcache_cache_only(data->regmap, false); + data->config &= ~JC42_CFG_SHUTDOWN; - i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG, - data->config); - return 0; + regmap_write(data->regmap, JC42_REG_CONFIG, data->config); + + /* Restore cached register values to hardware */ + return regcache_sync(data->regmap); } static const struct dev_pm_ops jc42_dev_pm_ops = { |