diff options
Diffstat (limited to 'drivers/ata/libata-scsi.c')
| -rw-r--r-- | drivers/ata/libata-scsi.c | 53 |
1 files changed, 24 insertions, 29 deletions
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 27b15176db56..b43a3196e2be 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -351,7 +351,7 @@ EXPORT_SYMBOL_GPL(ata_common_sdev_groups); /** * ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd. * @sdev: SCSI device for which BIOS geometry is to be determined - * @bdev: block device associated with @sdev + * @unused: gendisk associated with @sdev * @capacity: capacity of SCSI device * @geom: location to which geometry will be output * @@ -366,7 +366,7 @@ EXPORT_SYMBOL_GPL(ata_common_sdev_groups); * RETURNS: * Zero. */ -int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, +int ata_std_bios_param(struct scsi_device *sdev, struct gendisk *unused, sector_t capacity, int geom[]) { geom[0] = 255; @@ -859,18 +859,14 @@ static void ata_to_sense_error(u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, {0xFF, 0xFF, 0xFF, 0xFF}, // END mark }; static const unsigned char stat_table[][4] = { - /* Must be first because BUSY means no other bits valid */ - {0x80, ABORTED_COMMAND, 0x47, 0x00}, - // Busy, fake parity for now - {0x40, ILLEGAL_REQUEST, 0x21, 0x04}, - // Device ready, unaligned write command - {0x20, HARDWARE_ERROR, 0x44, 0x00}, - // Device fault, internal target failure - {0x08, ABORTED_COMMAND, 0x47, 0x00}, - // Timed out in xfer, fake parity for now - {0x04, RECOVERED_ERROR, 0x11, 0x00}, - // Recovered ECC error Medium error, recovered - {0xFF, 0xFF, 0xFF, 0xFF}, // END mark + /* Busy: must be first because BUSY means no other bits valid */ + { ATA_BUSY, ABORTED_COMMAND, 0x00, 0x00 }, + /* Device fault: INTERNAL TARGET FAILURE */ + { ATA_DF, HARDWARE_ERROR, 0x44, 0x00 }, + /* Corrected data error */ + { ATA_CORR, RECOVERED_ERROR, 0x00, 0x00 }, + + { 0xFF, 0xFF, 0xFF, 0xFF }, /* END mark */ }; /* @@ -942,6 +938,8 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc) if (!(qc->flags & ATA_QCFLAG_RTF_FILLED)) { ata_dev_dbg(dev, "missing result TF: can't generate ATA PT sense data\n"); + if (qc->err_mask) + ata_scsi_set_sense(dev, cmd, ABORTED_COMMAND, 0, 0); return; } @@ -996,8 +994,8 @@ static void ata_gen_ata_sense(struct ata_queued_cmd *qc) if (!(qc->flags & ATA_QCFLAG_RTF_FILLED)) { ata_dev_dbg(dev, - "missing result TF: can't generate sense data\n"); - return; + "Missing result TF: reporting aborted command\n"); + goto aborted; } /* Use ata_to_sense_error() to map status register bits @@ -1008,13 +1006,15 @@ static void ata_gen_ata_sense(struct ata_queued_cmd *qc) ata_to_sense_error(tf->status, tf->error, &sense_key, &asc, &ascq); ata_scsi_set_sense(dev, cmd, sense_key, asc, ascq); - } else { - /* Could not decode error */ - ata_dev_warn(dev, "could not decode error status 0x%x err_mask 0x%x\n", - tf->status, qc->err_mask); - ata_scsi_set_sense(dev, cmd, ABORTED_COMMAND, 0, 0); return; } + + /* Could not decode error */ + ata_dev_warn(dev, + "Could not decode error 0x%x, status 0x%x (err_mask=0x%x)\n", + tf->error, tf->status, qc->err_mask); +aborted: + ata_scsi_set_sense(dev, cmd, ABORTED_COMMAND, 0, 0); } void ata_scsi_sdev_config(struct scsi_device *sdev) @@ -3904,21 +3904,16 @@ static int ata_mselect_control_ata_feature(struct ata_queued_cmd *qc, /* Check cdl_ctrl */ switch (buf[0] & 0x03) { case 0: - /* Disable CDL if it is enabled */ - if (!(dev->flags & ATA_DFLAG_CDL_ENABLED)) - return 0; + /* Disable CDL */ ata_dev_dbg(dev, "Disabling CDL\n"); cdl_action = 0; dev->flags &= ~ATA_DFLAG_CDL_ENABLED; break; case 0x02: /* - * Enable CDL if not already enabled. Since this is mutually - * exclusive with NCQ priority, allow this only if NCQ priority - * is disabled. + * Enable CDL. Since CDL is mutually exclusive with NCQ + * priority, allow this only if NCQ priority is disabled. */ - if (dev->flags & ATA_DFLAG_CDL_ENABLED) - return 0; if (dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED) { ata_dev_err(dev, "NCQ priority must be disabled to enable CDL\n"); |