diff options
Diffstat (limited to 'arch')
97 files changed, 4950 insertions, 1056 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a89ffaff8e8f..f3d22db29775 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -373,6 +373,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-aristainetos2_7.dtb \ imx6dl-colibri-eval-v3.dtb \ imx6dl-cubox-i.dtb \ + imx6dl-cubox-i-emmc-som-v15.dtb \ + imx6dl-cubox-i-som-v15.dtb \ imx6dl-dfi-fs700-m60.dtb \ imx6dl-gw51xx.dtb \ imx6dl-gw52xx.dtb \ @@ -385,6 +387,11 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-gw5903.dtb \ imx6dl-gw5904.dtb \ imx6dl-hummingboard.dtb \ + imx6dl-hummingboard-emmc-som-v15.dtb \ + imx6dl-hummingboard-som-v15.dtb \ + imx6dl-hummingboard2.dtb \ + imx6dl-hummingboard2-emmc-som-v15.dtb \ + imx6dl-hummingboard2-som-v15.dtb \ imx6dl-icore.dtb \ imx6dl-icore-rqs.dtb \ imx6dl-nit6xlite.dtb \ @@ -397,6 +404,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-sabresd.dtb \ imx6dl-savageboard.dtb \ imx6dl-ts4900.dtb \ + imx6dl-ts7970.dtb \ imx6dl-tx6dl-comtft.dtb \ imx6dl-tx6s-8034.dtb \ imx6dl-tx6s-8034-mb7.dtb \ @@ -422,6 +430,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-b850v3.dtb \ imx6q-cm-fx6.dtb \ imx6q-cubox-i.dtb \ + imx6q-cubox-i-emmc-som-v15.dtb \ + imx6q-cubox-i-som-v15.dtb \ imx6q-dfi-fs700-m60.dtb \ imx6q-display5-tianma-tm070-1280x768.dtb \ imx6q-dmo-edmqmx6.dtb \ @@ -440,6 +450,11 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw5904.dtb \ imx6q-h100.dtb \ imx6q-hummingboard.dtb \ + imx6q-hummingboard-emmc-som-v15.dtb \ + imx6q-hummingboard-som-v15.dtb \ + imx6q-hummingboard2.dtb \ + imx6q-hummingboard2-emmc-som-v15.dtb \ + imx6q-hummingboard2-som-v15.dtb \ imx6q-icore.dtb \ imx6q-icore-ofcap10.dtb \ imx6q-icore-ofcap12.dtb \ @@ -460,6 +475,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-sbc6x.dtb \ imx6q-tbs2910.dtb \ imx6q-ts4900.dtb \ + imx6q-ts7970.dtb \ imx6q-tx6q-1010.dtb \ imx6q-tx6q-1010-comtft.dtb \ imx6q-tx6q-1020.dtb \ @@ -471,6 +487,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-tx6q-11x0-mb7.dtb \ imx6q-udoo.dtb \ imx6q-utilite-pro.dtb \ + imx6q-var-dt6customboard.dtb \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb \ imx6q-wandboard-revd1.dtb \ @@ -512,15 +529,17 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-14x14-evk.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ + imx7d-colibri-emmc-eval-v3.dtb \ imx7d-colibri-eval-v3.dtb \ imx7d-nitrogen7.dtb \ - imx7d-pico.dtb \ + imx7d-pico-pi.dtb \ imx7d-sbc-imx7.dtb \ imx7d-sdb.dtb \ imx7d-sdb-sht11.dtb \ imx7s-colibri-eval-v3.dtb \ imx7s-warp.dtb dtb-$(CONFIG_SOC_LS1021A) += \ + ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ ls1021a-twr.dtb dtb-$(CONFIG_SOC_VF610) += \ @@ -559,6 +578,7 @@ dtb-$(CONFIG_ARCH_MXS) += \ imx28-m28cu3.dtb \ imx28-m28evk.dtb \ imx28-sps1.dtb \ + imx28-ts4600.dtb \ imx28-tx28.dtb dtb-$(CONFIG_ARCH_NOMADIK) += \ ste-nomadik-s8815.dtb \ diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 09ce8b81fafa..c43cf704b768 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -628,11 +628,13 @@ usbphy0: usb-phy@0 { reg = <0>; compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; usbphy1: usb-phy@1 { reg = <1>; compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index 96f442ba6d22..2a140c8ae6d2 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -30,6 +30,7 @@ reg = <0>; clocks = <&clks IMX27_CLK_DUMMY>; clock-names = "main_clk"; + #phy-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index 2a9198f99a8d..2ed2d73b087e 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -63,6 +63,7 @@ vcc-supply = <®_5v0>; clocks = <&clks IMX27_CLK_DUMMY>; clock-names = "main_clk"; + #phy-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index c973c5d91875..c9095b7654c6 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -53,6 +53,7 @@ vcc-supply = <&sw3_reg>; clocks = <&clks IMX27_CLK_DUMMY>; clock-names = "main_clk"; + #phy-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts new file mode 100644 index 000000000000..1e391c9f1b7a --- /dev/null +++ b/arch/arm/boot/dts/imx28-ts4600.dts @@ -0,0 +1,79 @@ +/* + * Copyright (C) 2016 Savoir-Faire Linux + * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx28.dtsi" +#include "dt-bindings/gpio/gpio.h" + +/ { + + model = "Technologic Systems i.MX28 TS-4600"; + compatible = "technologic,imx28-ts4600", "fsl,imx28"; + + memory { + reg = <0x40000000 0x10000000>; /* 256MB */ + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_sck_cfg + &en_sd_pwr>; + broken-cd = <1>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; + }; + + pinctrl@80018000 { + + en_sd_pwr: en-sd-pwr@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_PWM3__GPIO_3_28 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + }; + }; + + apbx@80040000 { + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; + + reg_vddio_sd0: regulator-vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + gpio = <&gpio3 28 GPIO_ACTIVE_LOW>; + }; + +}; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 6d5e6a60bee7..f049c692c6b0 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -402,11 +402,13 @@ usbphy0: usb-phy@0 { reg = <0>; compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; usbphy1: usb-phy@1 { reg = <1>; compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 2a694c5cc8ae..4ac5ab614a7f 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -25,18 +25,41 @@ reg = <0x90000000 0x20000000>; }; - clocks { - ckih1 { - clock-frequency = <22579200>; - }; + ckih1 { + clock-frequency = <22579200>; + }; - clk_26M: codec_clock { - compatible = "fixed-clock"; - reg=<0>; - #clock-cells = <0>; - clock-frequency = <26000000>; - gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; - }; + clk_osc: clk-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + clk_osc_gate: clk-osc-gate { + compatible = "gpio-gate-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_clk26mhz_osc>; + clocks = <&clk_osc>; + #clock-cells = <0>; + enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + }; + + clk_audio: clk-audio { + compatible = "gpio-gate-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_clk26mhz_audio>; + clocks = <&clk_osc_gate>; + #clock-cells = <0>; + enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + }; + + clk_usb: clk-usb { + compatible = "gpio-gate-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_clk26mhz_usb>; + clocks = <&clk_osc_gate>; + #clock-cells = <0>; + enable-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; }; display1: disp1 { @@ -162,9 +185,11 @@ usbh1phy: usbh1phy@0 { compatible = "usb-nop-xceiv"; reg = <0>; - clocks = <&clks IMX5_CLK_DUMMY>; + clocks = <&clk_usb>; clock-names = "main_clk"; reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + vcc-supply = <&vusb_reg>; + #phy-cells = <0>; }; }; }; @@ -240,6 +265,10 @@ regulator-max-microvolt = <3150000>; }; + vusb_reg: vusb { + regulator-boot-on; + }; + vusb2_reg: vusb2 { regulator-min-microvolt = <2400000>; regulator-max-microvolt = <2775000>; @@ -339,10 +368,8 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_clkcodec>; reg = <0x0a>; - clocks = <&clk_26M>; + clocks = <&clk_audio>; VDDA-supply = <&vdig_reg>; VDDIO-supply = <&vvideo_reg>; }; @@ -413,6 +440,10 @@ status = "okay"; }; +&usbphy0 { + vcc-supply = <&vusb_reg>; +}; + &usbotg { dr_mode = "otg"; disable-over-current; @@ -431,9 +462,21 @@ >; }; - pinctrl_clkcodec: clkcodecgrp { + pinctrl_clk26mhz_audio: clk26mhzaudiocgrp { + fsl,pins = < + MX51_PAD_CSPI1_RDY__GPIO4_26 0x85 + >; + }; + + pinctrl_clk26mhz_osc: clk26mhzoscgrp { + fsl,pins = < + MX51_PAD_DI1_PIN12__GPIO3_1 0x85 + >; + }; + + pinctrl_clk26mhz_usb: clk26mhzusbgrp { fsl,pins = < - MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000 + MX51_PAD_EIM_D17__GPIO2_1 0x85 >; }; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 1305b05c7ed9..b3d952f37cdc 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -94,6 +94,7 @@ clocks = <&clks IMX5_CLK_USB_PHY_GATE>; clock-names = "main_clk"; clock-frequency = <19200000>; + #phy-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts index 564233e97412..f59b02bae68d 100644 --- a/arch/arm/boot/dts/imx51-ts4800.dts +++ b/arch/arm/boot/dts/imx51-ts4800.dts @@ -149,18 +149,18 @@ #size-cells = <1>; ranges = <0 0 0 0x1d000>; - syscon: syscon@b0010000 { + syscon: syscon@10000 { compatible = "syscon", "simple-mfd"; reg = <0x10000 0x3d>; reg-io-width = <2>; - wdt@e { + wdt { compatible = "technologic,ts4800-wdt"; syscon = <&syscon 0xe>; }; }; - touchscreen { + touchscreen@12000 { compatible = "technologic,ts4800-ts"; reg = <0x12000 0x1000>; syscon = <&syscon 0x10 6>; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index 49be0e1c812d..5306b78de0ca 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -242,7 +242,7 @@ sound { compatible = "simple-audio-card"; - simple-audio-card,name = "RDU1 audio"; + simple-audio-card,name = "Front"; simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&sound_codec>; simple-audio-card,frame-master = <&sound_codec>; @@ -251,7 +251,7 @@ simple-audio-card,routing = "Headphone Jack", "HPLEFT", "Headphone Jack", "HPRIGHT"; - simple-audio-card,aux-devs = <&tpa6130a2>; + simple-audio-card,aux-devs = <&hpa1>; sound_cpu: simple-audio-card,cpu { sound-dai = <&ssi2>; @@ -271,6 +271,7 @@ clock-names = "main_clk"; reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; vcc-supply = <&vusb_reg>; + #phy-cells = <0>; }; usbh2phy: usbphy2 { @@ -281,6 +282,7 @@ clock-names = "main_clk"; reset-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; vcc-supply = <&vusb_reg>; + #phy-cells = <0>; }; }; @@ -428,13 +430,13 @@ #size-cells = <0>; led-control = <0x0 0x0 0x3f83f8 0x0>; - sysled0 { + sysled0@3 { reg = <3>; label = "system:green:status"; linux,default-trigger = "default-on"; }; - sysled1 { + sysled1@4 { reg = <4>; label = "system:green:act"; linux,default-trigger = "heartbeat"; @@ -479,7 +481,7 @@ reg = <0x50>; }; - tpa6130a2: amp@60 { + hpa1: amp@60 { compatible = "ti,tpa6130a2"; reg = <0x60>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 378be720b3c7..00d30bd70068 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -113,6 +113,7 @@ reg = <0>; clocks = <&clks IMX5_CLK_USB_PHY_GATE>; clock-names = "main_clk"; + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts index 4f54fd4418a3..5e67e43004e7 100644 --- a/arch/arm/boot/dts/imx53-cx9020.dts +++ b/arch/arm/boot/dts/imx53-cx9020.dts @@ -152,7 +152,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi index ec390aa562c3..7ce69c63510c 100644 --- a/arch/arm/boot/dts/imx53-m53.dtsi +++ b/arch/arm/boot/dts/imx53-m53.dtsi @@ -64,7 +64,6 @@ stmpe_touchscreen { compatible = "st,stmpe-ts"; - reg = <0>; st,sample-time = <4>; st,mod-12b = <1>; st,ref-sel = <0>; diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts index 7eb53e48c2f4..fe15c9555d6e 100644 --- a/arch/arm/boot/dts/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts @@ -53,132 +53,130 @@ display = &display; }; - soc { - display: disp0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgb24_vga1>; - status = "okay"; + display: disp0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgb24_vga1>; + status = "okay"; - port { - display0_in: endpoint { - remote-endpoint = <&ipu_di0_disp0>; - }; + port { + display0_in: endpoint { + remote-endpoint = <&ipu_di0_disp0>; }; + }; - display-timings { - VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + display-timings { + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; }; }; }; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 71b58b6933e1..a22e461fc168 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -225,10 +225,16 @@ mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */ status = "okay"; - phy0: ethernet-phy@0 { - interrupt-parent = <&gpio2>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; - device_type = "ethernet-phy"; + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + device_type = "ethernet-phy"; + }; }; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 84f17f7abb71..38b31a37339b 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -116,6 +116,28 @@ }; }; + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupt-parent = <&tzic>; + interrupts = <77>; + }; + + usbphy0: usbphy-0 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY1_GATE>; + clock-names = "main_clk"; + #phy-cells = <0>; + status = "okay"; + }; + + usbphy1: usbphy-1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY2_GATE>; + clock-names = "main_clk"; + #phy-cells = <0>; + status = "okay"; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -299,20 +321,6 @@ reg = <0x53f00000 0x60>; }; - usbphy0: usbphy-0 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX5_CLK_USB_PHY1_GATE>; - clock-names = "main_clk"; - status = "okay"; - }; - - usbphy1: usbphy-1 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX5_CLK_USB_PHY2_GATE>; - clock-names = "main_clk"; - status = "okay"; - }; - usbotg: usb@53f80000 { compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80000 0x0200>; @@ -433,6 +441,13 @@ clock-names = "ipg", "per"; }; + srtc: rtc@53fa4000 { + compatible = "fsl,imx53-rtc"; + reg = <0x53fa4000 0x4000>; + interrupts = <24>; + clocks = <&clks IMX5_CLK_SRTC_GATE>; + }; + iomuxc: iomuxc@53fa8000 { compatible = "fsl,imx53-iomuxc"; reg = <0x53fa8000 0x4000>; @@ -813,10 +828,5 @@ reg = <0xf8000000 0x20000>; clocks = <&clks IMX5_CLK_OCRAM>; }; - - pmu { - compatible = "arm,cortex-a8-pmu"; - interrupts = <77>; - }; }; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index cc418cecabdb..3c9f4af9e9ff 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -31,35 +31,33 @@ reg = <0x10000000 0x40000000>; }; - soc { - display0: disp0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp>; - status = "okay"; + display0: disp0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp>; + status = "okay"; - display-timings { - 480x800p60 { - native-mode; - clock-frequency = <30000000>; - hactive = <480>; - vactive = <800>; - hfront-porch = <59>; - hback-porch = <10>; - hsync-len = <10>; - vback-porch = <15>; - vfront-porch = <15>; - vsync-len = <15>; - hsync-active = <1>; - vsync-active = <1>; - }; + display-timings { + 480x800p60 { + native-mode; + clock-frequency = <30000000>; + hactive = <480>; + vactive = <800>; + hfront-porch = <59>; + hback-porch = <10>; + hsync-len = <10>; + vback-porch = <15>; + vfront-porch = <15>; + vsync-len = <15>; + hsync-active = <1>; + vsync-active = <1>; }; + }; - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; }; }; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts index 126ff964eded..96cd835ccbf6 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts @@ -20,34 +20,32 @@ reg = <0x10000000 0x40000000>; }; - soc { - display0: disp0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp>; - status = "okay"; + display0: disp0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp>; + status = "okay"; - display-timings { - 800x480p60 { - native-mode; - clock-frequency = <33246000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <88>; - hback-porch = <88>; - hsync-len = <80>; - vback-porch = <10>; - vfront-porch = <10>; - vsync-len = <25>; - vsync-active = <1>; - }; + display-timings { + 800x480p60 { + native-mode; + clock-frequency = <33246000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <88>; + hback-porch = <88>; + hsync-len = <80>; + vback-porch = <10>; + vfront-porch = <10>; + vsync-len = <25>; + vsync-active = <1>; }; + }; - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; }; }; }; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 5705ebee0595..dcf9206f3e0d 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -163,7 +163,7 @@ /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { - compatible = "st,m41t00"; + compatible = "st,m41t0"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts b/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts new file mode 100644 index 000000000000..2b2fc360b865 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-sr-som-emmc.dtsi" +#include "imx6qdl-cubox-i.dtsi" + +/ { + model = "SolidRun Cubox-i Solo/DualLite (1.5som+emmc)"; + compatible = "solidrun,cubox-i/dl", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts b/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts new file mode 100644 index 000000000000..e09c565d1d1f --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-cubox-i.dtsi" + +/ { + model = "SolidRun Cubox-i Solo/DualLite (1.5som)"; + compatible = "solidrun,cubox-i/dl", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/imx6dl-cubox-i.dts index f10a36b8647d..2b1b3e193f53 100644 --- a/arch/arm/boot/dts/imx6dl-cubox-i.dts +++ b/arch/arm/boot/dts/imx6dl-cubox-i.dts @@ -41,6 +41,8 @@ /dts-v1/; #include "imx6dl.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-brcm.dtsi" #include "imx6qdl-cubox-i.dtsi" / { diff --git a/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts new file mode 100644 index 000000000000..a63f742f20d9 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) + * Based on dt work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-sr-som-emmc.dtsi" +#include "imx6qdl-hummingboard.dtsi" + +/ { + model = "SolidRun HummingBoard Solo/DualLite (1.5som+emmc)"; + compatible = "solidrun,hummingboard/dl", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts new file mode 100644 index 000000000000..66a06cf3cdf3 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) + * Based on dt work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-hummingboard.dtsi" + +/ { + model = "SolidRun HummingBoard Solo/DualLite (1.5som)"; + compatible = "solidrun,hummingboard/dl", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 39c2602fa87c..cbd02eb486e1 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -42,6 +42,8 @@ /dts-v1/; #include "imx6dl.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-brcm.dtsi" #include "imx6qdl-hummingboard.dtsi" / { diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts new file mode 100644 index 000000000000..80313c13bcdb --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts @@ -0,0 +1,55 @@ +/* + * Device Tree file for SolidRun HummingBoard2 + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * Based on work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-emmc.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-hummingboard2.dtsi" + +/ { + model = "SolidRun HummingBoard2 Solo/DualLite (1.5som+emmc)"; + compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts new file mode 100644 index 000000000000..e61ef1156f8b --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts @@ -0,0 +1,54 @@ +/* + * Device Tree file for SolidRun HummingBoard2 + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * Based on work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-hummingboard2.dtsi" + +/ { + model = "SolidRun HummingBoard2 Solo/DualLite (1.5som)"; + compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2.dts b/arch/arm/boot/dts/imx6dl-hummingboard2.dts new file mode 100644 index 000000000000..b12cd87f3f94 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-hummingboard2.dts @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * Based on dt work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-brcm.dtsi" +#include "imx6qdl-hummingboard2.dtsi" +#include "imx6qdl-hummingboard2-emmc.dtsi" + +/ { + model = "SolidRun HummingBoard2 Solo/DualLite"; + compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-pinfunc.h b/arch/arm/boot/dts/imx6dl-pinfunc.h index 0ead323fdbd2..37e430a261de 100644 --- a/arch/arm/boot/dts/imx6dl-pinfunc.h +++ b/arch/arm/boot/dts/imx6dl-pinfunc.h @@ -668,6 +668,7 @@ #define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN 0x1f4 0x5c4 0x8f0 0x3 0x1 #define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0 #define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x1f4 0x5c4 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT 0x1f8 0x5c8 0x000 0x0 0x0 #define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1f8 0x5c8 0x818 0x1 0x0 #define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1f8 0x5c8 0x838 0x2 0x0 #define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1f8 0x5c8 0x000 0x3 0x0 diff --git a/arch/arm/boot/dts/imx6dl-ts7970.dts b/arch/arm/boot/dts/imx6dl-ts7970.dts new file mode 100644 index 000000000000..d104daf305d9 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-ts7970.dts @@ -0,0 +1,50 @@ +/* + * Copyright 2015 Technologic Systems + * Copyright 2017 Savoir-faire Linux + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-ts7970.dtsi" + +/ { + model = "Technologic Systems i.MX6 Solo/DualLite TS-7970 (Default Device Tree)"; + compatible = "technologic,imx6dl-ts7970", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 4d693a75ce98..c01674fa098a 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -170,7 +170,7 @@ }; &gpr { - ipu1_csi0_mux: ipu1_csi0_mux@34 { + ipu1_csi0_mux { compatible = "video-mux"; mux-controls = <&mux 0>; #address-cells = <1>; @@ -224,7 +224,7 @@ }; }; - ipu1_csi1_mux: ipu1_csi1_mux@34 { + ipu1_csi1_mux { compatible = "video-mux"; mux-controls = <&mux 1>; #address-cells = <1>; @@ -309,10 +309,12 @@ #size-cells = <0>; mipi_vc0_to_ipu1_csi0_mux: endpoint@0 { + reg = <0>; remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>; }; mipi_vc0_to_ipu1_csi1_mux: endpoint@1 { + reg = <1>; remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc0>; }; }; @@ -323,10 +325,12 @@ #size-cells = <0>; mipi_vc1_to_ipu1_csi0_mux: endpoint@0 { + reg = <0>; remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc1>; }; mipi_vc1_to_ipu1_csi1_mux: endpoint@1 { + reg = <1>; remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc1>; }; }; @@ -337,10 +341,12 @@ #size-cells = <0>; mipi_vc2_to_ipu1_csi0_mux: endpoint@0 { + reg = <0>; remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc2>; }; mipi_vc2_to_ipu1_csi1_mux: endpoint@1 { + reg = <1>; remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc2>; }; }; @@ -351,10 +357,12 @@ #size-cells = <0>; mipi_vc3_to_ipu1_csi0_mux: endpoint@0 { + reg = <0>; remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc3>; }; mipi_vc3_to_ipu1_csi1_mux: endpoint@1 { + reg = <1>; remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc3>; }; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts index 8b56656e53da..aa0e631f3c0a 100644 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -158,7 +158,7 @@ /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { - compatible = "st,m41t00"; + compatible = "st,m41t0"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts index 27dc0fc686a9..e8dccf552122 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts @@ -170,7 +170,7 @@ /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { - compatible = "st,m41t00"; + compatible = "st,m41t0"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 40b2c67fe7af..6831dfd24cc1 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -174,7 +174,7 @@ /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { - compatible = "st,m41t00"; + compatible = "st,m41t0"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts b/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts new file mode 100644 index 000000000000..3e59ebbb3608 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-sr-som-emmc.dtsi" +#include "imx6qdl-cubox-i.dtsi" + +/ { + model = "SolidRun Cubox-i Dual/Quad (1.5som+emmc)"; + compatible = "solidrun,cubox-i/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1104>; + fsl,transmit-boost-mdB = <0>; + fsl,transmit-atten-16ths = <9>; + fsl,no-spread-spectrum; +}; diff --git a/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts b/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts new file mode 100644 index 000000000000..dab70d1230a2 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-cubox-i.dtsi" + +/ { + model = "SolidRun Cubox-i Dual/Quad (1.5som)"; + compatible = "solidrun,cubox-i/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1104>; + fsl,transmit-boost-mdB = <0>; + fsl,transmit-atten-16ths = <9>; + fsl,no-spread-spectrum; +}; diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts index b68aa0e57f20..1c7b262e3709 100644 --- a/arch/arm/boot/dts/imx6q-cubox-i.dts +++ b/arch/arm/boot/dts/imx6q-cubox-i.dts @@ -41,6 +41,8 @@ /dts-v1/; #include "imx6q.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-brcm.dtsi" #include "imx6qdl-cubox-i.dtsi" / { diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi index 4084de43d4d9..09085fde3341 100644 --- a/arch/arm/boot/dts/imx6q-display5.dtsi +++ b/arch/arm/boot/dts/imx6q-display5.dtsi @@ -255,7 +255,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: tfa9879@6C { + codec: tfa9879@6c { #sound-dai-cells = <0>; compatible = "nxp,tfa9879"; reg = <0x6C>; diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts index a3269f57df2b..8a2ea6c58902 100644 --- a/arch/arm/boot/dts/imx6q-h100.dts +++ b/arch/arm/boot/dts/imx6q-h100.dts @@ -42,8 +42,8 @@ /dts-v1/; #include "imx6q.dtsi" -#include "imx6qdl-microsom.dtsi" -#include "imx6qdl-microsom-ar8035.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-brcm.dtsi" / { model = "Auvidea H100"; @@ -108,21 +108,6 @@ regulator-always-on; }; - reg_nvcc_sd2: regulator-nvcc-sd2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_h100_reg_nvcc_sd2>; - compatible = "regulator-gpio"; - regulator-name = "NVCC_SD2"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-type = "voltage"; - regulator-boot-on; - regulator-always-on; - gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; - states = <1800000 0x1 - 3300000 0x0>; - }; - reg_usbh1_vbus: regulator-usb-h1-vbus { compatible = "regulator-fixed"; enable-active-high; @@ -205,7 +190,7 @@ reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; /* IRQ has a wrong pull resistor which renders it useless */ - port@0 { + port { tc358743_out: endpoint { remote-endpoint = <&mipi_csi2_in>; data-lanes = <1 2 3 4>; @@ -260,12 +245,6 @@ >; }; - pinctrl_h100_reg_nvcc_sd2: h100-reg-nvcc-sd2 { - fsl,pins = < - MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 - >; - }; - pinctrl_h100_sgtl5000: h100-sgtl5000 { fsl,pins = < MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 @@ -316,6 +295,7 @@ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0 >; }; @@ -328,6 +308,7 @@ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0 >; }; @@ -340,6 +321,7 @@ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0 >; }; }; @@ -348,7 +330,7 @@ &mipi_csi { status = "okay"; - port@0 { + port { mipi_csi2_in: endpoint { remote-endpoint = <&tc358743_out>; data-lanes = <1 2 3 4>; @@ -389,7 +371,6 @@ pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>; pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>; vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_nvcc_sd2>; cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts new file mode 100644 index 000000000000..c51b4e4fd71e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) + * Based on dt work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-sr-som-emmc.dtsi" +#include "imx6qdl-hummingboard.dtsi" + +/ { + model = "SolidRun HummingBoard Dual/Quad (1.5som+emmc)"; + compatible = "solidrun,hummingboard/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1025>; + fsl,transmit-boost-mdB = <3330>; + fsl,transmit-atten-16ths = <9>; + fsl,receive-eq-mdB = <3000>; +}; diff --git a/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts new file mode 100644 index 000000000000..e4132d62ffa2 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) + * Based on dt work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-hummingboard.dtsi" + +/ { + model = "SolidRun HummingBoard Dual/Quad (1.5som)"; + compatible = "solidrun,hummingboard/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1025>; + fsl,transmit-boost-mdB = <3330>; + fsl,transmit-atten-16ths = <9>; + fsl,receive-eq-mdB = <3000>; +}; diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts index 69a7a0a1cb21..8c9e94e648a7 100644 --- a/arch/arm/boot/dts/imx6q-hummingboard.dts +++ b/arch/arm/boot/dts/imx6q-hummingboard.dts @@ -42,6 +42,8 @@ /dts-v1/; #include "imx6q.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-brcm.dtsi" #include "imx6qdl-hummingboard.dtsi" / { diff --git a/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts new file mode 100644 index 000000000000..1998ebfa0fe0 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts @@ -0,0 +1,63 @@ +/* + * Device Tree file for SolidRun HummingBoard2 + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * Based on work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-emmc.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-hummingboard2.dtsi" + +/ { + model = "SolidRun HummingBoard2 Dual/Quad (1.5som+emmc)"; + compatible = "solidrun,hummingboard2/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1104>; + fsl,transmit-boost-mdB = <0>; + fsl,transmit-atten-16ths = <9>; + fsl,no-spread-spectrum; +}; diff --git a/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts new file mode 100644 index 000000000000..d3ad7329cd6d --- /dev/null +++ b/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts @@ -0,0 +1,62 @@ +/* + * Device Tree file for SolidRun HummingBoard2 + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * Based on work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-ti.dtsi" +#include "imx6qdl-hummingboard2.dtsi" + +/ { + model = "SolidRun HummingBoard2 Dual/Quad (1.5som)"; + compatible = "solidrun,hummingboard2/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1104>; + fsl,transmit-boost-mdB = <0>; + fsl,transmit-atten-16ths = <9>; + fsl,no-spread-spectrum; +}; diff --git a/arch/arm/boot/dts/imx6q-hummingboard2.dts b/arch/arm/boot/dts/imx6q-hummingboard2.dts new file mode 100644 index 000000000000..5249f53dcdbc --- /dev/null +++ b/arch/arm/boot/dts/imx6q-hummingboard2.dts @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * Based on dt work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-sr-som.dtsi" +#include "imx6qdl-sr-som-brcm.dtsi" +#include "imx6qdl-hummingboard2.dtsi" +#include "imx6qdl-hummingboard2-emmc.dtsi" + +/ { + model = "SolidRun HummingBoard2 Dual/Quad"; + compatible = "solidrun,hummingboard2/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1104>; + fsl,transmit-boost-mdB = <0>; + fsl,transmit-atten-16ths = <9>; + fsl,no-spread-spectrum; +}; diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h index 9fc6120a1853..cfb11d3e739c 100644 --- a/arch/arm/boot/dts/imx6q-pinfunc.h +++ b/arch/arm/boot/dts/imx6q-pinfunc.h @@ -551,6 +551,7 @@ #define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1e0 0x4f4 0x860 0x2 0x0 #define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT 0x1e0 0x4f4 0x000 0x4 0x0 #define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1e0 0x4f4 0x000 0x5 0x0 +#define MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT 0x1e4 0x4f8 0x000 0x0 0x0 #define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1e4 0x4f8 0x848 0x1 0x1 #define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1e4 0x4f8 0x868 0x2 0x0 #define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1e4 0x4f8 0x000 0x3 0x0 diff --git a/arch/arm/boot/dts/imx6q-ts7970.dts b/arch/arm/boot/dts/imx6q-ts7970.dts new file mode 100644 index 000000000000..f19e18995e68 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-ts7970.dts @@ -0,0 +1,54 @@ +/* + * Copyright 2015 Technologic Systems + * Copyright 2017 Savoir-faire Linux + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-ts7970.dtsi" + +/ { + model = "Technologic Systems i.MX6 Quad TS-7970 (Default Device Tree)"; + compatible = "technologic,imx6q-ts7970", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts new file mode 100644 index 000000000000..e0728d475f6f --- /dev/null +++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Support for Variscite DART-MX6 Carrier-board + * + * Copyright 2017 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-var-dart.dtsi" +#include <dt-bindings/input/linux-event-codes.h> + +/ { + model = "Variscite DART-MX6 Carrier-board"; + compatible = "variscite,dt6customboard", "fsl,imx6q"; + + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 50000>; + brightness-levels = <0 4 8 16 32 64 128 248>; + default-brightness-level = <7>; + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + back { + gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + label = "Key Back"; + linux,input-type = <1>; + debounce-interval = <100>; + wakeup-source; + }; + + home { + gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + label = "Key Home"; + linux,input-type = <1>; + debounce-interval = <100>; + wakeup-source; + }; + + menu { + gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + label = "Key Menu"; + linux,input-type = <1>; + debounce-interval = <100>; + wakeup-source; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led1 { + gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led2 { + gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + panel1: lvds-panel { + compatible = "sgd,gktw70sdae4se", "panel-lvds"; + backlight = <&backlight_lvds>; + width-mm = <153>; + height-mm = <86>; + label = "gktw70sdae4se"; + data-mapping = "jeida-18"; + + panel-timing { + clock-frequency = <32000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <39>; + hfront-porch = <39>; + vback-porch = <29>; + vfront-porch = <13>; + hsync-len = <47>; + vsync-len = <2>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; + + reg_usb_h1_vbus: regulator-usbh1vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator-usbotgvbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "dt6-customboard-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_codec>; + simple-audio-card,frame-master = <&sound_codec>; + simple-audio-card,widgets = "Headphone", "Headphone Jack", + "Line", "Line In"; + simple-audio-card,routing = "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In"; + + sound_cpu: simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; + + sound_codec: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&clks IMX6QDL_CLK_CKO>; + }; + }; +}; + +&can1 { + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>, + <&gpio4 10 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec { + status = "okay"; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; +}; + +&hdmi { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-inverted-y; + }; + + rtc@68 { + compatible = "isil,isl12057"; + reg = <0x68>; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@1 { + status = "okay"; + + port@4 { + reg = <4>; + + lvds1_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usdhc2 { + cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index e80fdca585f8..4e776e036cbc 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -338,7 +338,6 @@ stmpe_touchscreen { compatible = "st,stmpe-ts"; - reg = <0>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; /* 8 sample average control */ diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index 829a47938179..9fc1fa449f64 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -111,32 +111,28 @@ }; }; - regulators { - compatible = "simple-bus"; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_usbh1_vbus: usb-h1-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_usbh1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - reg_usb_otg_vbus: usb-otg-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; }; sound { diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index 7d64075204ae..ee4d0f84eeb2 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -12,48 +12,43 @@ #include <dt-bindings/gpio/gpio.h> / { - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_2p5v: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; - reg_usbh1_vbus: regulator@2 { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_usbotg_vbus: regulator@3 { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + reg_usbh1_vbus: regulator-usbh1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg_vbus: regulator-usbotg-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index 1b1872873207..376750882ed3 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -52,46 +52,42 @@ enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>; }; - regulators { - compatible = "simple-bus"; - - reg_2p5v: 2p5v { - compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_usbh1_vbus: usb-h1-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usbotg_vbus: usb-otg-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usbh1_vbus: regulator-usbh1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg_vbus: regulator-usbotg-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index fc66bbfd6796..e4eb300549d4 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -274,7 +274,6 @@ stmpe_touchscreen { compatible = "st,stmpe-ts"; - reg = <0>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; /* 8 sample average control */ diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 14fff4ee6516..d1cfdc264126 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -38,8 +38,6 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ -#include "imx6qdl-microsom.dtsi" -#include "imx6qdl-microsom-ar8035.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> @@ -64,38 +62,36 @@ }; }; - regulators { - compatible = "simple-bus"; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + v_5v0: regulator-v-5v0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_5v0"; + }; - reg_usbh1_vbus: usb-h1-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 0 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + v_usb2: regulator-v-usb2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_usb2"; + vin-supply = <&v_5v0>; + }; - reg_usbotg_vbus: usb-otg-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 22 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + v_usb1: regulator-v-usb1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_usb1"; + vin-supply = <&v_5v0>; }; sound-spdif { @@ -139,7 +135,7 @@ status = "okay"; - rtc: pcf8523@68 { + rtc@68 { compatible = "nxp,pcf8523"; reg = <0x68>; }; @@ -243,21 +239,25 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_usbh1>; - vbus-supply = <®_usbh1_vbus>; + vbus-supply = <&v_usb2>; status = "okay"; }; &usbotg { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_usbotg>; - vbus-supply = <®_usbotg_vbus>; + vbus-supply = <&v_usb1>; status = "okay"; }; &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>; - vmmc-supply = <®_3p3v>; + vmmc-supply = <&vcc_3v3>; cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "okay"; }; + +&vcc_3v3 { + vin-supply = <&v_5v0>; +}; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 37c07c0748aa..92583238ca4a 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -38,8 +38,6 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ -#include "imx6qdl-microsom.dtsi" -#include "imx6qdl-microsom-ar8035.dtsi" / { chosen { @@ -53,38 +51,58 @@ pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>; }; - regulators { - compatible = "simple-bus"; + v_3v2: regulator-v-3v2 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "v_3v2"; + vin-supply = <&v_5v0>; + }; - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + v_5v0: regulator-v-5v0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_5v0"; + }; - reg_usbh1_vbus: usb-h1-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + v_sd: regulator-v-sd { + compatible = "regulator-fixed"; + gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_vmmc>; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "v_sd"; + startup-delay-us = <1000>; + vin-supply = <&v_3v2>; + }; - reg_usbotg_vbus: usb-otg-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + v_usb2: regulator-v-usb2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_usb2"; + vin-supply = <&v_5v0>; + }; + + v_usb1: regulator-v-usb1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_usb1"; + vin-supply = <&v_5v0>; }; sound-sgtl5000 { @@ -132,20 +150,20 @@ status = "okay"; /* Pro baseboard model */ - rtc: pcf8523@68 { + rtc@68 { compatible = "nxp,pcf8523"; reg = <0x68>; }; /* Pro baseboard model */ - sgtl5000: sgtl5000@a { + sgtl5000: codec@a { clocks = <&clks IMX6QDL_CLK_CKO>; compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>; reg = <0x0a>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; + VDDA-supply = <&v_3v2>; + VDDIO-supply = <&v_3v2>; }; }; @@ -247,6 +265,11 @@ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 >; }; + pinctrl_hummingboard_vmmc: hummingboard-vmmc { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 + >; + }; }; }; @@ -280,7 +303,7 @@ &usbh1 { disable-over-current; - vbus-supply = <®_usbh1_vbus>; + vbus-supply = <&v_usb2>; status = "okay"; }; @@ -288,7 +311,7 @@ disable-over-current; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; - vbus-supply = <®_usbotg_vbus>; + vbus-supply = <&v_usb1>; status = "okay"; }; @@ -298,7 +321,11 @@ &pinctrl_hummingboard_usdhc2_aux &pinctrl_hummingboard_usdhc2 >; - vmmc-supply = <®_3p3v>; + vmmc-supply = <&v_sd>; cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "okay"; }; + +&vcc_3v3 { + vin-supply = <&v_3v2>; +}; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi new file mode 100644 index 000000000000..f400405381a7 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi @@ -0,0 +1,72 @@ +/* + * Device Tree file for SolidRun HummingBoard2 + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +&iomuxc { + hummingboard2 { + pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3 { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 + >; + }; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_usdhc3>; + vmmc-supply = <&v_3v2>; + vqmmc-supply = <&v_3v2>; + bus-width = <8>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi new file mode 100644 index 000000000000..dffbc92e0023 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi @@ -0,0 +1,540 @@ +/* + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + chosen { + stdout-path = &uart1; + }; + + ir_recv: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio7 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>; + linux,rc-map-name = "rc-rc6-mce"; + }; + + v_3v2: regulator-v-3v2 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "v_3v2"; + }; + + v_5v0: regulator-v-5v0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_5v0"; + }; + + vcc_1p8: regulator-vcc-1p8 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1p8"; + vin-supply = <&v_3v2>; + }; + + v_sd: regulator-v-sd { + compatible = "regulator-fixed"; + gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_vmmc>; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "v_sd"; + startup-delay-us = <1000>; + vin-supply = <&v_3v2>; + }; + + v_usb1: regulator-v-usb1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_usb1"; + vin-supply = <&v_5v0>; + }; + + v_usb2: regulator-v-usb2 { + /* USB hub port 1 */ + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_usb2"; + vin-supply = <&v_5v0>; + }; + + v_usb3: regulator-v-usb3 { + /* USB hub port 3 */ + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_usb3"; + vin-supply = <&v_5v0>; + }; + + v_usb4: regulator-v-usb4 { + /* USB hub port 4 */ + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_usb4"; + vin-supply = <&v_5v0>; + }; + + sound-sgtl5000 { + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + compatible = "fsl,imx-audio-sgtl5000"; + model = "On-board Codec"; + mux-ext-port = <5>; + mux-int-port = <1>; + ssi-controller = <&ssi1>; + }; +}; + +&audmux { + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>; + cs-gpios = <&gpio2 26 0>; + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_i2c1>; + status = "okay"; + + pcf8523: rtc@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; + + sgtl5000: codec@a { + clocks = <&clks IMX6QDL_CLK_CKO>; + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>; + reg = <0x0a>; + VDDA-supply = <&v_3v2>; + VDDD-supply = <&vcc_1p8>; + VDDIO-supply = <&v_3v2>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hummingboard2 { + pinctrl_hog: hoggrp { + fsl,pins = < + /* + * 36 pin headers GPIO description. The pins + * numbering as following - + * + * 3.2v 5v 74 75 + * 73 72 71 70 + * 69 68 67 66 + * + * 77 78 79 76 + * 65 64 61 60 + * 53 52 51 50 + * 49 48 166 132 + * 95 94 90 91 + * GND 54 24 204 + * + * The GPIO numbers can be extracted using + * signal name from below. + * Example - + * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is + * GPIO(3,10) which is (3-1)*32+10 = gpio 74 + * + * i.e. The mapping of GPIO(X,Y) to Linux gpio + * number is : gpio number = (X-1) * 32 + Y + */ + /* DI1_PIN15 */ + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1 + /* DI1_PIN02 */ + MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1 + /* DISP1_DATA00 */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1 + /* DISP1_DATA01 */ + MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1 + /* DISP1_DATA02 */ + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1 + /* DISP1_DATA03 */ + MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1 + /* DISP1_DATA04 */ + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1 + /* DISP1_DATA05 */ + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1 + /* DISP1_DATA06 */ + MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1 + /* DISP1_DATA07 */ + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1 + /* DI1_D0_CS */ + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1 + /* DI1_D1_CS */ + MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1 + /* DI1_PIN01 */ + MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1 + /* DI1_PIN03 */ + MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1 + /* DISP1_DATA08 */ + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1 + /* DISP1_DATA09 */ + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1 + /* DISP1_DATA10 */ + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1 + /* DISP1_DATA11 */ + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1 + /* DISP1_DATA12 */ + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1 + /* DISP1_DATA13 */ + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1 + /* DISP1_DATA14 */ + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1 + /* DISP1_DATA15 */ + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1 + /* DISP1_DATA16 */ + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1 + /* DISP1_DATA17 */ + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1 + /* DISP1_DATA18 */ + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1 + /* DISP1_DATA19 */ + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1 + /* DISP1_DATA20 */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1 + /* DISP1_DATA21 */ + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1 + /* DISP1_DATA22 */ + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1 + /* DISP1_DATA23 */ + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1 + /* DI1_DISP_CLK */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1 + /* SPDIF_IN */ + MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1 + /* SPDIF_OUT */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1 + + /* MikroBUS GPIO pin number 10 */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 + >; + }; + + pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 /* CS */ + >; + }; + + pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9 { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000 + >; + }; + + pinctrl_hummingboard2_hdmi: hummingboard2-hdmi { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_hummingboard2_i2c1: hummingboard2-i2c1 { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard2_i2c2: hummingboard2-i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard2_i2c3: hummingboard2-i2c3 { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard2_mipi: hummingboard2_mipi { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1 + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1 + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 + >; + }; + + pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-reset { + fsl,pins = < + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1 + >; + }; + + pinctrl_hummingboard2_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_hummingboard2_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000 { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbus { + fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; + }; + + pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbus { + fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>; + }; + + pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbus { + fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>; + }; + + pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-id { + /* + * Similar to pinctrl_usbotg_2, but we want it + * pulled down for a fixed host connection. + */ + fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + }; + + pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbus { + fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; + }; + + pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-aux { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071 + >; + }; + + pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2 { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 + >; + }; + + pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhz { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9 + >; + }; + + pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhz { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9 + >; + }; + + pinctrl_hummingboard2_vmmc: hummingboard2-vmmc { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 + >; + }; + + pinctrl_hummingboard2_uart3: hummingboard2-uart3 { + fsl,pins = < + MX6QDL_PAD_EIM_D25__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D24__UART3_RX_DATA 0x40013000 + >; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_pcie_reset>; + reset-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_pwm1>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_pwm3>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; + +&usbotg { + disable-over-current; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>; + vbus-supply = <&v_usb1>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = < + &pinctrl_hummingboard2_usdhc2_aux + &pinctrl_hummingboard2_usdhc2 + >; + pinctrl-1 = < + &pinctrl_hummingboard2_usdhc2_aux + &pinctrl_hummingboard2_usdhc2_100mhz + >; + pinctrl-2 = < + &pinctrl_hummingboard2_usdhc2_aux + &pinctrl_hummingboard2_usdhc2_200mhz + >; + vmmc-supply = <&v_sd>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_uart3>; + status = "okay"; +}; + +&vcc_3v3 { + vin-supply = <&v_3v2>; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index 3a77f0fedfce..fd05f7caa472 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -172,7 +172,7 @@ }; }; - i2cmux@2 { + i2c2mux { compatible = "i2c-mux-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2mux>; @@ -183,20 +183,20 @@ i2c-parent = <&i2c2>; idle-state = <0>; - i2c2@1 { + i2c2mux@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; }; - i2c2@2 { + i2c2mux@2 { reg = <2>; #address-cells = <1>; #size-cells = <0>; }; }; - i2cmux@3 { + i2c3mux { compatible = "i2c-mux-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3mux>; @@ -206,7 +206,7 @@ i2c-parent = <&i2c3>; idle-state = <0>; - i2c3@1 { + i2c3mux@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 4bdf29169d2a..919b6b7619a4 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -276,6 +276,23 @@ compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x0 0xc0000>; + }; + + partition@c0000 { + label = "env"; + reg = <0xc0000 0x2000>; + }; + + partition@c2000 { + label = "splash"; + reg = <0xc2000 0x13e000>; + }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 4fa2fac3877b..82d6ccb46982 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -235,6 +235,9 @@ }; &hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_cec>; + ddc-i2c-bus = <&i2c2>; status = "okay"; }; @@ -453,6 +456,12 @@ >; }; + pinctrl_hdmi_cec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi index 6a410160c9ee..b55af61dfeca 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi @@ -40,7 +40,7 @@ */ #include <dt-bindings/gpio/gpio.h> / { - clk_sdio: sdio-clock { + clk_brcm: brcm-clock { compatible = "gpio-gate-clock"; #clock-cells = <0>; pinctrl-names = "default"; @@ -48,27 +48,23 @@ enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; }; - regulators { - compatible = "simple-bus"; - - reg_brcm: brcm-reg { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 19 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_microsom_brcm_reg>; - regulator-name = "brcm_reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <200000>; - }; + reg_brcm: brcm-reg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 19 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_brcm_reg>; + regulator-name = "brcm_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <200000>; }; usdhc1_pwrseq: usdhc1_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>, <&gpio6 0 GPIO_ACTIVE_LOW>; - clocks = <&clk_sdio>; + clocks = <&clk_brcm>; clock-names = "ext_clock"; }; }; @@ -104,13 +100,6 @@ >; }; - pinctrl_microsom_uart1: microsom-uart1 { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; - pinctrl_microsom_uart4: microsom-uart4 { fsl,pins = < MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 @@ -133,12 +122,6 @@ }; }; -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_microsom_uart1>; - status = "okay"; -}; - /* UART4 - Connected to optional BRCM Wifi/BT/FM */ &uart4 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi new file mode 100644 index 000000000000..5f3b8baab20f --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2013,2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +&iomuxc { + microsom { + pinctrl_microsom_usdhc3: microsom-usdhc3 { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 + >; + }; + }; +}; + +/* USDHC3 - eMMC */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_usdhc3>; + bus-width = <8>; + non-removable; + vmmc-supply = <&vcc_3v3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi new file mode 100644 index 000000000000..44a97ba93a95 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi @@ -0,0 +1,170 @@ +/* + * Copyright (C) 2013,2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/gpio/gpio.h> + +/ { + nvcc_sd1: regulator-nvcc-sd1 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-name = "nvcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + }; + + clk_ti_wifi: ti-wifi-clock { + /* This is a hack around the kernel - using "fixed clock" + * results in the "pinctrl" properties being ignored, and + * the clock not being output. Instead, use a gated clock + * and the unrouted WL_XTAL_PU gpio. + */ + compatible = "gpio-gate-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_ti_clk>; + enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + }; + + pwrseq_ti_wifi: ti-wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_ti_wifi_en>; + reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <200>; + clocks = <&clk_ti_wifi>; + clock-names = "ext_clock"; + }; +}; + +&iomuxc { + microsom { + pinctrl_microsom_ti_bt: microsom-ti-bt { + fsl,pins = < + /* BT_EN_SOC */ + MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x40013070 + >; + }; + + pinctrl_microsom_ti_clk: microsom-ti-clk { + fsl,pins = < + /* EXT_32K */ + MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x1b0b0 + /* WL_XTAL_PU (unrouted) */ + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070 + >; + }; + + pinctrl_microsom_ti_wifi_en: microsom-ti-wifi-en { + fsl,pins = < + /* WLAN_EN_SOC */ + MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x40013070 + >; + }; + + pinctrl_microsom_ti_wifi_irq: microsom-ti-wifi-irq { + fsl,pins = < + /* WLAN_IRQ */ + MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40013070 + >; + }; + + pinctrl_microsom_uart4: microsom-uart4 { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_microsom_usdhc1: microsom-usdhc1 { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + >; + }; + }; +}; + +/* UART4 - Connected to optional TI Wi-Fi/BT/FM */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_uart4>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "ti,wl1837-st"; + clocks = <&clk_ti_wifi>; + clock-names = "ext_clock"; + enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_ti_bt>; + }; +}; + +/* USDHC1 - Connected to optional TI Wi-Fi/BT/FM */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_usdhc1>; + bus-width = <4>; + keep-power-in-suspend; + mmc-pwrseq = <&pwrseq_ti_wifi>; + non-removable; + vmmc-supply = <&vcc_3v3>; + /* vqmmc-supply = <&nvcc_sd1>; - MMC layer doesn't like it! */ + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupts-extended = <&gpio6 4 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_ti_wifi_irq>; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi index 900e8c781f91..4ccb7afc4b35 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi @@ -1,9 +1,6 @@ /* * Copyright (C) 2013,2014 Russell King * - * This describes the hookup for an AR8035 to the iMX6 on the SolidRun - * MicroSOM. - * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a @@ -41,6 +38,18 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/gpio/gpio.h> + +/ { + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-name = "vcc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; @@ -51,7 +60,7 @@ }; &iomuxc { - enet { + microsom { pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 { fsl,pins = < MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 @@ -59,10 +68,10 @@ /* AR8035 reset */ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 /* AR8035 interrupt */ - MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x80000000 + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 /* GPIO16 -> AR8035 25MHz */ - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x13030 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 @@ -95,5 +104,18 @@ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x03000 >; }; + + pinctrl_microsom_uart1: microsom-uart1 { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; }; }; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_uart1>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi new file mode 100644 index 000000000000..f0be516dc28e --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi @@ -0,0 +1,594 @@ +/* + * Copyright 2015 Technologic Systems + * Copyright 2017 Savoir-Faire Linux + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds1>; + compatible = "gpio-leds"; + + green-led { + label = "green-led"; + gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + red-led { + label = "red-led"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + yel-led { + label = "yellow-led"; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + blue-led { + label = "blue-led"; + gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + en-usb-5v { + label = "en-usb-5v"; + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + sel_dc_usb { + label = "sel_dc_usb"; + gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_can1_3v3: reg_can1_3v3 { + compatible = "regulator-fixed"; + regulator-name = "reg_can1_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can2_3v3: en-reg_can2_3v3 { + compatible = "regulator-fixed"; + regulator-name = "reg_can2_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan_vmmc: regulator_wlan_vmmc { + compatible = "regulator-fixed"; + regulator-name = "wlan_vmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio8 14 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + sound-sgtl5000 { + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + compatible = "fsl,imx-audio-sgtl5000"; + model = "On-board Codec"; + mux-ext-port = <3>; + mux-int-port = <1>; + ssi-controller = <&ssi1>; + }; +}; + +&audmux { + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_3v3>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2_3v3>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + n25q064: flash@0 { + compatible = "micron,n25q064", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&ecspi2 { + cs-gpios = < + &gpio5 31 GPIO_ACTIVE_HIGH + &gpio7 12 GPIO_ACTIVE_HIGH + &gpio5 18 GPIO_ACTIVE_HIGH + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; + status = "okay"; + + m41t00s: rtc@68 { + compatible = "m41t00"; + reg = <0x68>; + }; + + isl12022: rtc@6f { + compatible = "isl,isl12022"; + reg = <0x6f>; + }; + + gpio8: gpio@28 { + compatible = "technologic,ts7970-gpio"; + reg = <0x28>; + #gpio-cells = <2>; + gpio-controller; + ngpio = <32>; + }; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + reg = <0x0a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x100b1 /* Onboard Flash CS */ + >; + }; + + pinctrl_ecspi2: ecspi2 { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x100b1 /* FPGA_SPI_CS0 */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x100b1 /* FPGA_SPI_CS1 */ + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1 /* HD1_SPI_CS */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b088 /* FPGA_RESET */ + MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x10 /* FPGA 24MHZ */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b088 /* FPGA_IRQ_0 */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b088 /* FPGA_IRQ_1 */ + >; + }; + + pinctrl_enet: enet { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b088 + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b088 /* ETH_PHY_RESET */ + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b088 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b088 + MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b088 /* EN_CAN_1 */ + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b088 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b088 + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b088 /* EN_CAN_2 */ + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* Onboard */ + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b088 /* USB_HUB_RESET */ + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b088 /* SEL_DC_USB */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b088 /* EN_USB_5V */ + MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b088 /* JTAG_FPGA_TMS */ + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b088 /* JTAG_FPGA_TCK */ + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b088 /* JTAG_FPGA_TDO */ + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b088 /* JTAG_FPGA_TDI */ + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b088 /* GYRO_INT */ + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x1b088 /* MODBUS_FAULT */ + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b088 /* BUS_DIR/JP_SD_BOOT */ + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b088 /* EN_MODBUS_24V */ + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b088 /* EN_MODBUS_3V */ + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b088 /* I210_RESET */ + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b088 /* EN_RTC_PWR */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b088 /* REVSTRAP1 */ + + /* Offboard */ + MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b088 /* LCD_D09 */ + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b088 /* HD1_IRQ */ + MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b088 /* LCD_D10 */ + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x1b088 /* LCD_D11 */ + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b088 /* BUS_BHE */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b088 /* BUS_ALE */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b088 /* BUS_CS */ + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b088 /* DIO_20 */ + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b088 /* BUS_WAIT */ + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b088 /* MUX_AD_00 */ + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b088 /* MUX_AD_01 */ + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b088 /* MUX_AD_02 */ + MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b088 /* MUX_AD_03 */ + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b088 /* MUX_AD_04 */ + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b088 /* MUX_AD_05 */ + MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b088 /* MUX_AD_06 */ + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b088 /* MUX_AD_07 */ + MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b088 /* MUX_AD_08 */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b088 /* MUX_AD_09 */ + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b088 /* MUX_AD_10 */ + MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b088 /* MUX_AD_11 */ + MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x1b088 /* MUX_AD_12 */ + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b088 /* MUX_AD_13 */ + MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x1b088 /* MUX_AD_14 */ + MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b088 /* MUX_AD_15 */ + + /* Strapping only */ + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b088 + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x1b088 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1 + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1 + >; + }; + + pinctrl_leds1: leds1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b088 /* GREEN_LED */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b088 /* RED_LED */ + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b088 /* YEL_LED */ + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b088 /* IMX6_BLUE_LED */ + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* Audio CLK */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b088 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b088 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b088 + MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b088 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b088 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b088 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b088 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b088 + MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b088 + MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b088 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b088 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b088 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b088 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b088 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x17059 /* WIFI IRQ */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b088 /* EN_SD_POWER */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; +}; + +&pcie { + status = "okay"; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +/* WIFI */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + vmmc-supply = <®_wlan_vmmc>; + bus-width = <4>; + non-removable; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + +/* SD */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vmmc-supply = <®_3p3v>; + bus-width = <4>; + fsl,wp-controller; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + vmmc-supply = <®_3p3v>; + bus-width = <4>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index c96c91d83678..4161b7d4323a 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -28,6 +28,13 @@ status = "disabled"; }; + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio2 4 0>; + pinctrl-0 = <&pinctrl_power_off>; + pinctrl-names = "default"; + }; + memory { reg = <0x10000000 0x40000000>; }; @@ -172,6 +179,12 @@ >; }; + pinctrl_power_off: poweroffgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x30 + >; + }; + pinctrl_touchscreenp7: touchscreenp7grp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x70 @@ -208,8 +221,8 @@ fsl,pins = < MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x1b0b0 MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x1b0b0 - MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x1b0b0 - MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x1b0b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x13080 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x13080 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 >; }; @@ -218,8 +231,8 @@ fsl,pins = < MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x1b0b0 MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0 - MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x1b0b0 - MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x1b0b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x13080 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x13080 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 >; }; @@ -228,8 +241,8 @@ fsl,pins = < MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0 - MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x1b0b0 - MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x1b0b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x13080 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x13080 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi new file mode 100644 index 000000000000..421d6f527609 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi @@ -0,0 +1,503 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Support for Variscite DART-MX6 Module + * + * Copyright 2017 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> + +/ { + memory { + reg = <0x10000000 0x40000000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_wl18xx_vmmc: regulator-wl18xx { + compatible = "regulator-fixed"; + regulator-name = "vwl1807"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <70000>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + ssi2 { + fsl,audmux-port = <1>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TFSEL(2) | + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(2)) + IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + aud3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(1) + >; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "disabled"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + status = "disabled"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmicec>; + ddc-i2c-bus = <&i2c1>; + status = "disabled"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "disabled"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + tlv320aic3106: codec@1b { + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + #sound-dai-cells = <0>; + DRVDD-supply = <®_3p3v>; + AVDD-supply = <®_3p3v>; + IOVDD-supply = <®_3p3v>; + DVDD-supply = <®_3p3v>; + ai3x-ocmv = <0>; + gpio-reset = <&gpio5 5 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "disabled"; +}; + +&iomuxc { + pinctrl_audmux: audmux { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + /* Audio Clock */ + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_bt: bt { + fsl,pins = < + /* Bluetooth enable */ + MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b1 + /* Bluetooth Slow Clock */ + MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT 0x000b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + /* SPI1 CS0 */ + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 + /* SPI1 CS1 */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_hdmicec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + /* PMIC INT */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + /* WL_EN */ + MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x17071 + /* WL_IRQ */ + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x17071 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170B9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100B9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170B9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170B9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170B9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170B9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170F9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100F9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170F9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170F9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170F9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170F9 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; +}; + +&pcie { + fsl,tx-swing-full = <103>; + fsl,tx-swing-low = <103>; + reset-gpio = <&gpio4 11 GPIO_ACTIVE_LOW>; + status = "disabled"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "disabled"; +}; + +®_arm { + vin-supply = <&sw1a_reg>; +}; + +®_pu { + vin-supply = <&sw1c_reg>; +}; + +®_soc { + vin-supply = <&sw1c_reg>; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2 &pinctrl_bt>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio6 18 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "disabled"; +}; + +&usbh1 { + status = "disabled"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "disabled"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <4>; + vmmc-supply = <®_wl18xx_vmmc>; + non-removable; + wakeup-source; + keep-power-in-suspend; + cap-power-off-card; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "disabled"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + non-removable; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi index 6d8d9ca96646..3a8a4952d45e 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi @@ -21,6 +21,11 @@ }; }; +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + &i2c3 { clock-frequency = <100000>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 7812fbac963c..72f52fcecee1 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -49,6 +49,7 @@ aliases { mdio-gpio0 = &mdio1; + rtc0 = &ds1341; }; mdio1: mdio { @@ -501,7 +502,7 @@ reg = <0x54>; }; - rtc@68 { + ds1341: rtc@68 { compatible = "dallas,ds1341"; reg = <0x68>; }; @@ -580,6 +581,17 @@ pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; status = "okay"; + + host@0 { + reg = <0 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + i210: i210@0 { + reg = <0 0 0 0 0>; + }; + }; }; &usdhc2 { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 1ce4eabf0590..59ff86695a14 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -80,6 +80,75 @@ }; }; + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + fsl,tempmon-data = <&ocotp>; + clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + }; + + ldb: ldb { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb"; + gpr = <&gpr>; + status = "disabled"; + + lvds-channel@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + + lvds0_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_lvds0>; + }; + }; + + port@1 { + reg = <1>; + + lvds0_mux_1: endpoint { + remote-endpoint = <&ipu1_di1_lvds0>; + }; + }; + }; + + lvds-channel@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + status = "disabled"; + + port@0 { + reg = <0>; + + lvds1_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_lvds1>; + }; + }; + + port@1 { + reg = <1>; + + lvds1_mux_1: endpoint { + remote-endpoint = <&ipu1_di1_lvds1>; + }; + }; + }; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&gpc>; + interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -224,11 +293,6 @@ status = "disabled"; }; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; - }; - aips-bus@2000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -631,8 +695,11 @@ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>, <0 54 IRQ_TYPE_LEVEL_HIGH>, <0 127 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; - regulator-1p1 { + regulator-1p1@20c8110 { + reg = <0x20c8110>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <1000000>; @@ -647,7 +714,8 @@ anatop-enable-bit = <0>; }; - regulator-3p0 { + regulator-3p0@20c8120 { + reg = <0x20c8120>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -662,7 +730,8 @@ anatop-enable-bit = <0>; }; - regulator-2p5 { + regulator-2p5@20c8130 { + reg = <0x20c8130>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2250000>; @@ -677,7 +746,8 @@ anatop-enable-bit = <0>; }; - reg_arm: regulator-vddcore { + reg_arm: regulator-vddcore@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddarm"; regulator-min-microvolt = <725000>; @@ -694,7 +764,8 @@ anatop-max-voltage = <1450000>; }; - reg_pu: regulator-vddpu { + reg_pu: regulator-vddpu@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddpu"; regulator-min-microvolt = <725000>; @@ -711,7 +782,8 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc { + reg_soc: regulator-vddsoc@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; @@ -729,14 +801,6 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx6q-tempmon"; - interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - fsl,tempmon-data = <&ocotp>; - clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; - }; - usbphy1: usbphy@20c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; @@ -773,6 +837,10 @@ mask = <0x60>; status = "disabled"; }; + + snvs_lpgpr: snvs-lpgpr { + compatible = "fsl,imx6q-snvs-lpgpr"; + }; }; epit1: epit@20d0000 { /* EPIT1 */ @@ -841,60 +909,6 @@ reg = <0x20e0000 0x4000>; }; - ldb: ldb { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb"; - gpr = <&gpr>; - status = "disabled"; - - lvds-channel@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - status = "disabled"; - - port@0 { - reg = <0>; - - lvds0_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_lvds0>; - }; - }; - - port@1 { - reg = <1>; - - lvds0_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_lvds0>; - }; - }; - }; - - lvds-channel@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - status = "disabled"; - - port@0 { - reg = <0>; - - lvds1_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_lvds1>; - }; - }; - - port@1 { - reg = <1>; - - lvds1_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_lvds1>; - }; - }; - }; - }; - dcic1: dcic@20e4000 { reg = <0x020e4000 0x4000>; interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>; @@ -1017,6 +1031,7 @@ fec: ethernet@2188000 { compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; + interrupt-names = "int0", "pps"; interrupts-extended = <&intc 0 118 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 60600b4cf5fe..2844ab541759 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -20,7 +20,7 @@ reg = <0x80000000 0x40000000>; }; - backlight { + backlight_display: backlight_display { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -39,58 +39,54 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_otg1_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 0 0>; - enable-active-high; - vin-supply = <&swbst_reg>; - }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; - reg_usb_otg2_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 2 0>; - enable-active-high; - vin-supply = <&swbst_reg>; - }; + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; - reg_aud3v: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "wm8962-supply-3v15"; - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3150000>; - regulator-boot-on; - }; + reg_aud3v: regulator-aud3v { + compatible = "regulator-fixed"; + regulator-name = "wm8962-supply-3v15"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-boot-on; + }; - reg_aud4v: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "wm8962-supply-4v2"; - regulator-min-microvolt = <4325000>; - regulator-max-microvolt = <4325000>; - regulator-boot-on; - }; + reg_aud4v: regulator-aud4v { + compatible = "regulator-fixed"; + regulator-name = "wm8962-supply-4v2"; + regulator-min-microvolt = <4325000>; + regulator-max-microvolt = <4325000>; + regulator-boot-on; + }; - reg_lcd_3v3: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "lcd-3v3"; - gpio = <&gpio4 3 0>; - enable-active-high; - }; + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lcd_5v: regulator-lcd-5v { + compatible = "regulator-fixed"; + regulator-name = "lcd-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; sound { @@ -108,6 +104,19 @@ mux-int-port = <2>; mux-ext-port = <3>; }; + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; }; &audmux { @@ -546,31 +555,11 @@ &lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd>; - lcd-supply = <®_lcd_3v3>; - display = <&display0>; status = "okay"; - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33500000>; - hactive = <800>; - vactive = <480>; - hback-porch = <89>; - hfront-porch = <164>; - vback-porch = <23>; - vfront-porch = <10>; - hsync-len = <10>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 3ea1a41893c8..ae8df3cf687e 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -102,6 +102,21 @@ }; }; + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpc>; + fsl,tempmon = <&anatop>; + fsl,tempmon-data = <&ocotp>; + clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&gpc>; + interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -125,11 +140,6 @@ arm,data-latency = <4 2 3>; }; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; - }; - aips1: aips-bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -517,8 +527,11 @@ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>, <0 54 IRQ_TYPE_LEVEL_HIGH>, <0 127 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; - regulator-1p1 { + regulator-1p1@20c8110 { + reg = <0x20c8110>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <800000>; @@ -533,7 +546,8 @@ anatop-enable-bit = <0>; }; - regulator-3p0 { + regulator-3p0@20c8120 { + reg = <0x20c8120>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -548,7 +562,8 @@ anatop-enable-bit = <0>; }; - regulator-2p5 { + regulator-2p5@20c8130 { + reg = <0x20c8130>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2100000>; @@ -563,7 +578,8 @@ anatop-enable-bit = <0>; }; - reg_arm: regulator-vddcore { + reg_arm: regulator-vddcore@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddarm"; regulator-min-microvolt = <725000>; @@ -580,7 +596,8 @@ anatop-max-voltage = <1450000>; }; - reg_pu: regulator-vddpu { + reg_pu: regulator-vddpu@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddpu"; regulator-min-microvolt = <725000>; @@ -597,7 +614,8 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc { + reg_soc: regulator-vddsoc@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; @@ -615,14 +633,6 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx6q-tempmon"; - interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - fsl,tempmon-data = <&ocotp>; - clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; - }; - usbphy1: usbphy@20c9000 { compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index da815527a7f8..d35aa858f9db 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -24,7 +24,7 @@ reg = <0x80000000 0x40000000>; }; - backlight { + backlight_display: backlight-display { compatible = "pwm-backlight"; pwms = <&pwm3 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -49,86 +49,91 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + vcc_sd3: regulator-vcc-sd3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_sd3>; + regulator-name = "VCC_SD3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vcc_sd3: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_vcc_sd3>; - regulator-name = "VCC_SD3"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_usb_otg1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg1>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_usb_otg2_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg2>; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_psu_5v: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "PSU-5V0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_lcd_3v3: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "lcd-3v3"; - gpio = <&gpio3 27 0>; - enable-active-high; - }; - - reg_peri_3v3: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_peri_3v3>; - regulator-name = "peri_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - reg_enet_3v3: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_3v3>; - regulator-name = "enet_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; - }; + reg_psu_5v: regulator-psu-5v { + compatible = "regulator-fixed"; + regulator-name = "PSU-5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + gpio = <&gpio3 27 0>; + enable-active-high; + }; + + reg_peri_3v3: regulator-peri-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_peri_3v3>; + regulator-name = "peri_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_enet_3v3: regulator-enet-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_3v3>; + regulator-name = "enet_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + }; + + reg_pcie_gpio: regulator-pcie-gpio { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lcd_5v: regulator-lcd-5v { + compatible = "regulator-fixed"; + regulator-name = "lcd-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; sound { @@ -146,6 +151,19 @@ mux-int-port = <2>; mux-ext-port = <6>; }; + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; }; &audmux { @@ -212,34 +230,22 @@ }; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie_gpio>; + status = "okay"; +}; + &lcdif1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd>; - lcd-supply = <®_lcd_3v3>; - display = <&display0>; status = "okay"; - display0: display0 { - bits-per-pixel = <16>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33500000>; - hactive = <800>; - vactive = <480>; - hback-porch = <89>; - hfront-porch = <164>; - vback-porch = <23>; - vfront-porch = <10>; - hsync-len = <10>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; @@ -453,6 +459,18 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0 + >; + }; + + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x10b0 + >; + }; + pinctrl_peri_3v3: peri3v3grp { fsl,pins = < MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000 diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 5b03ba3beda9..fd7879342d0d 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -141,6 +141,22 @@ }; }; + tempmon: tempmon { + compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -148,11 +164,6 @@ interrupt-parent = <&gpc>; ranges; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - }; - ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; @@ -574,8 +585,11 @@ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; - regulator-1p1 { + regulator-1p1@20c8110 { + reg = <0x20c8110>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <800000>; @@ -590,7 +604,8 @@ anatop-enable-bit = <0>; }; - regulator-3p0 { + regulator-3p0@20c8120 { + reg = <0x20c8120>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -605,7 +620,8 @@ anatop-enable-bit = <0>; }; - regulator-2p5 { + regulator-2p5@20c8130 { + reg = <0x20c8130>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2100000>; @@ -620,7 +636,8 @@ anatop-enable-bit = <0>; }; - reg_arm: regulator-vddcore { + reg_arm: regulator-vddcore@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddarm"; regulator-min-microvolt = <725000>; @@ -637,7 +654,8 @@ anatop-max-voltage = <1450000>; }; - reg_pcie: regulator-vddpcie { + reg_pcie: regulator-vddpcie@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddpcie"; regulator-min-microvolt = <725000>; @@ -653,7 +671,8 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc { + reg_soc: regulator-vddsoc@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; @@ -671,15 +690,6 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; - }; - usbphy1: usbphy@20c9000 { compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; @@ -750,6 +760,19 @@ #interrupt-cells = <3>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&intc>; + clocks = <&clks IMX6SX_CLK_IPG>; + clock-names = "ipg"; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + pd_pci: power-domain@3 { + reg = <3>; + #power-domain-cells = <0>; + power-supply = <®_pcie>; + }; + }; }; iomuxc: iomuxc@20e0000 { @@ -862,6 +885,7 @@ fec1: ethernet@2188000 { compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; + interrupt-names = "int0", "pps"; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_ENET>, @@ -971,6 +995,7 @@ fec2: ethernet@21b4000 { compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; reg = <0x021b4000 0x4000>; + interrupt-names = "int0", "pps"; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_ENET>, @@ -1138,7 +1163,7 @@ reg = <0x02200000 0x100000>; ranges; - spba-bus@2200000 { + spba-bus@2240000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -1304,25 +1329,29 @@ pcie: pcie@8ffc000 { compatible = "fsl,imx6sx-pcie", "snps,dw-pcie"; - reg = <0x08ffc000 0x4000>; /* DBI */ + reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>; + reg-names = "dbi", "config"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - /* configuration space */ - ranges = <0x00000800 0 0x08f00000 0x08f00000 0 0x00080000 - /* downstream I/O */ - 0x81000000 0 0 0x08f80000 0 0x00010000 - /* non-prefetchable memory */ - 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0 0x08f80000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>, - <&clks IMX6SX_CLK_PCIE_AXI>, + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PCIE_AXI>, <&clks IMX6SX_CLK_LVDS1_OUT>, + <&clks IMX6SX_CLK_PCIE_REF_125M>, <&clks IMX6SX_CLK_DISPLAY_AXI>; - clock-names = "pcie_ref_125m", "pcie_axi", - "lvds_gate", "display_axi"; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_inbound_axi"; + power-domains = <&pd_pci>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index e5d3ef88be60..18fdb088ba1e 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -30,19 +30,14 @@ status = "okay"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - reg_sd1_vmmc: sd1_regulator { - compatible = "regulator-fixed"; - regulator-name = "VSD_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; }; sound { diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index d5181f85ca9c..1b14e4d39c26 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -136,6 +136,23 @@ clock-output-names = "ipp_di1"; }; + tempmon: tempmon { + compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -143,12 +160,6 @@ interrupt-parent = <&gpc>; ranges; - pmu { - compatible = "arm,cortex-a7-pmu"; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; @@ -476,6 +487,7 @@ fec2: ethernet@20b4000 { compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; reg = <0x020b4000 0x4000>; + interrupt-names = "int0", "pps"; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_ENET>, @@ -530,8 +542,11 @@ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; - reg_3p0: regulator-3p0 { + reg_3p0: regulator-3p0@20c8110 { + reg = <0x20c8110>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2625000>; @@ -545,7 +560,8 @@ anatop-enable-bit = <0>; }; - reg_arm: regulator-vddcore { + reg_arm: regulator-vddcore@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "cpu"; regulator-min-microvolt = <725000>; @@ -562,7 +578,8 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc { + reg_soc: regulator-vddsoc@20c8140 { + reg = <0x20c8140>; compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; @@ -598,15 +615,6 @@ fsl,anatop = <&anatop>; }; - tempmon: tempmon { - compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; - }; - snvs: snvs@20cc000 { compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; reg = <0x020cc000 0x4000>; @@ -635,6 +643,10 @@ linux,keycode = <KEY_POWER>; wakeup-source; }; + + snvs_lpgpr: snvs-lpgpr { + compatible = "fsl,imx6ul-snvs-lpgpr"; + }; }; epit1: epit@20d0000 { @@ -784,6 +796,7 @@ fec1: ethernet@2188000 { compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; + interrupt-names = "int0", "pps"; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_ENET>, diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi index 18bebd6d8d47..3f2746169181 100644 --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -45,6 +45,13 @@ stdout-path = "serial0:115200n8"; }; + /* fixed crystal dedicated to mpc258x */ + clk16m: clk16m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + }; + panel: panel { compatible = "edt,et057090dhu"; backlight = <&bl>; @@ -70,6 +77,17 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; }; &bl { @@ -88,6 +106,24 @@ status = "okay"; }; +&ecspi3 { + status = "okay"; + + mcp2515: can@0 { + compatible = "microchip,mcp2515"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_int>; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <10000000>; + vdd-supply = <®_3v3>; + xceiver-supply = <®_5v0>; + status = "okay"; + }; +}; + &fec1 { status = "okay"; }; @@ -97,7 +133,7 @@ /* M41T0M6 real time clock on carrier board */ rtc: m41t0m6@68 { - compatible = "st,m41t00"; + compatible = "st,m41t0"; reg = <0x68>; }; }; @@ -147,5 +183,6 @@ &usdhc1 { keep-power-in-suspend; wakeup-source; + vmmc-supply = <®_3v3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index bb5bf94f1a32..895fbde4d433 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -43,7 +43,10 @@ / { bl: backlight { compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_bl_on>; pwms = <&pwm1 0 5000000 0>; + enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; }; reg_module_3v3: regulator-module-3v3 { @@ -86,7 +89,13 @@ }; &cpu0 { - arm-supply = <®_DCDC2>; + cpu-supply = <®_DCDC2>; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>; + cs-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; }; &fec1 { @@ -112,7 +121,6 @@ fsl,use-minimum-ecc; nand-on-flash-bbt; nand-ecc-mode = "hw"; - status = "okay"; }; &i2c1 { @@ -299,6 +307,22 @@ no-1-8-v; cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; disable-wp; + vqmmc-supply = <®_LDO2>; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + fsl,tuning-step = <2>; + max-frequency = <100000000>; + vmmc-supply = <®_module_3v3>; + vqmmc-supply = <®_DCDC3>; + non-removable; }; &iomuxc { @@ -307,17 +331,16 @@ pinctrl_gpio1: gpio1-grp { fsl,pins = < - MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */ - MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */ - MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0X14 /* SODIMM 73 */ - MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0X14 /* SODIMM 77 */ + MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x74 /* SODIMM 55 */ + MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x74 /* SODIMM 63 */ + MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x14 /* SODIMM 77 */ MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */ - MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x14 /* SODIMM 91 */ + MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x74 /* SODIMM 91 */ MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14 /* SODIMM 93 */ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 /* SODIMM 95 */ MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x14 /* SODIMM 99 */ - MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x14 /* SODIMM 105 */ - MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x14 /* SODIMM 107 */ + MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x74 /* SODIMM 105 */ + MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x74 /* SODIMM 107 */ MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 /* SODIMM 111 */ MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 /* SODIMM 113 */ MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 /* SODIMM 115 */ @@ -329,11 +352,12 @@ MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x14 /* SODIMM 127 */ MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x14 /* SODIMM 131 */ MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x14 /* SODIMM 133 */ + MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x14 /* SODIMM 169 */ MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x14 /* SODIMM 24 */ MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM 100 */ MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM 102 */ MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x14 /* SODIMM 104 */ - MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* SODIMM 106 */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x74 /* SODIMM 106 */ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* SODIMM 110 */ MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* SODIMM 112 */ MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x14 /* SODIMM 114 */ @@ -357,8 +381,7 @@ pinctrl_gpio2: gpio2-grp { /* On X22 Camera interface */ fsl,pins = < MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x14 /* SODIMM 65 */ - MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x14 /* SODIMM 69 */ - MX7D_PAD_SD1_WP__GPIO5_IO1 0x14 /* SODIMM 71 */ + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x74 /* SODIMM 69 */ MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x14 /* SODIMM 75 */ MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x14 /* SODIMM 79 */ MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x14 /* SODIMM 81 */ @@ -378,8 +401,8 @@ MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x14 /* SODIMM 138 */ MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x14 /* SODIMM 140 */ MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x14 /* SODIMM 142 */ - MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x14 /* SODIMM 146 */ - MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x14 /* SODIMM 148 */ + MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x74 /* SODIMM 144 */ + MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x74 /* SODIMM 146 */ >; }; @@ -396,6 +419,12 @@ >; }; + pinctrl_can_int: can-int-grp { + fsl,pins = < + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0X14 /* SODIMM 73 */ + >; + }; + pinctrl_enet1: enet1grp { fsl,pins = < MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14 @@ -434,12 +463,17 @@ >; }; + pinctrl_gpio_bl_on: gpio-bl-on { + fsl,pins = < + MX7D_PAD_SD1_WP__GPIO5_IO1 0x14 /* SODIMM 71 */ + >; + }; + pinctrl_gpmi_nand: gpmi-nand-grp { fsl,pins = < MX7D_PAD_SD3_CLK__NAND_CLE 0x71 MX7D_PAD_SD3_CMD__NAND_ALE 0x71 MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B 0x71 - MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B 0x71 MX7D_PAD_SAI1_TX_DATA__NAND_READY_B 0x74 MX7D_PAD_SD3_STROBE__NAND_RE_B 0x71 MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x71 @@ -507,6 +541,7 @@ pinctrl_pwm1: pwm1-grp { fsl,pins = < MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x79 + MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x4 >; }; @@ -525,6 +560,7 @@ pinctrl_pwm4: pwm4-grp { fsl,pins = < MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x79 + MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x4 >; }; @@ -559,7 +595,7 @@ >; }; - pinctrl_usbotg2_reg: gpio-usbotg2-vbus { + pinctrl_usbh_reg: gpio-usbh-vbus { fsl,pins = < MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 USBH PEN */ >; @@ -576,6 +612,54 @@ >; }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a + MX7D_PAD_SD3_CLK__SD3_CLK 0x1a + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b + MX7D_PAD_SD3_CLK__SD3_CLK 0x1b + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b + >; + }; + pinctrl_sai1: sai1-grp { fsl,pins = < MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts new file mode 100644 index 000000000000..8ee73c870b12 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017 Toradex AG + */ + +/dts-v1/; +#include "imx7d-colibri-emmc.dtsi" +#include "imx7-colibri-eval-v3.dtsi" + +/ { + model = "Toradex Colibri iMX7D 1GB (eMMC) on Colibri Evaluation Board V3"; + compatible = "toradex,colibri-imx7d-emmc-eval-v3", + "toradex,colibri-imx7d-emmc", "fsl,imx7d"; +}; + +&usbotg2 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi new file mode 100644 index 000000000000..9b63b9c89e4b --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017 Toradex AG + */ + +#include "imx7d.dtsi" +#include "imx7-colibri.dtsi" + +/ { + memory { + reg = <0x80000000 0x40000000>; + }; +}; + +&usbotg2 { + dr_mode = "host"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts index a608a14d8c85..136e11ab4893 100644 --- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts @@ -48,20 +48,9 @@ model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3"; compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d", "fsl,imx7d"; - - reg_usb_otg2_vbus: regulator-usb-otg2-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg2_reg>; - regulator-name = "VCC_USB[1-4]"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; - vin-supply = <®_5v0>; - }; }; &usbotg2 { - vbus-supply = <®_usb_otg2_vbus>; + vbus-supply = <®_usbh_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi index 3c2cb502b388..6f2bb70c1fbd 100644 --- a/arch/arm/boot/dts/imx7d-colibri.dtsi +++ b/arch/arm/boot/dts/imx7d-colibri.dtsi @@ -49,6 +49,10 @@ }; }; +&gpmi { + status = "okay"; +}; + &usbotg2 { dr_mode = "host"; }; diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/imx7d-pico-pi.dts new file mode 100644 index 000000000000..ee02d931cf49 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-pico-pi.dts @@ -0,0 +1,181 @@ +/* + * Copyright 2017 NXP + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx7d-pico.dtsi" + +/ { + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx7-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,cpu { + sound-dai = <&sai1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + status = "okay"; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@a { + #sound-dai-cells = <0>; + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_vref_1v8>; + }; +}; + + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, + <&clks IMX7D_SAI1_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <24576000>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 + MX7D_PAD_SD2_WP__ENET1_MDC 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x4000007f + MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f + MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79 + MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79 + >; + }; + + pinctrl_usbotg1_pwr: usbotg_pwr { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-pico.dts b/arch/arm/boot/dts/imx7d-pico.dtsi index 508328b2a6bf..e307462a48ec 100644 --- a/arch/arm/boot/dts/imx7d-pico.dts +++ b/arch/arm/boot/dts/imx7d-pico.dtsi @@ -100,62 +100,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "imx7-sgtl5000"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&dailink_master>; - simple-audio-card,frame-master = <&dailink_master>; - simple-audio-card,cpu { - sound-dai = <&sai1>; - }; - - dailink_master: simple-audio-card,codec { - sound-dai = <&codec>; - clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; - }; - }; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet1>; - assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, - <&clks IMX7D_ENET1_TIME_ROOT_CLK>; - assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; - assigned-clock-rates = <0>, <100000000>; - phy-mode = "rgmii"; - phy-handle = <ðphy0>; - fsl,magic-packet; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - status = "okay"; - }; - }; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - codec: sgtl5000@a { - #sound-dai-cells = <0>; - reg = <0x0a>; - compatible = "fsl,sgtl5000"; - clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; - VDDA-supply = <®_2p5v>; - VDDIO-supply = <®_vref_1v8>; - }; }; &i2c4 { @@ -253,35 +197,6 @@ }; }; -&sai1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai1>; - assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, - <&clks IMX7D_SAI1_ROOT_CLK>; - assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; - assigned-clock-rates = <0>, <24576000>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>; - assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; - status = "okay"; -}; - -&usbotg1 { - vbus-supply = <®_usb_otg1_vbus>; - status = "okay"; -}; - -&usbotg2 { - vbus-supply = <®_usb_otg2_vbus>; - dr_mode = "host"; - status = "okay"; -}; - &usdhc2 { /* Wifi SDIO */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; @@ -315,32 +230,6 @@ }; &iomuxc { - pinctrl_enet1: enet1grp { - fsl,pins = < - MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 - MX7D_PAD_SD2_WP__ENET1_MDC 0x3 - MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 - MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 - MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 - MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 - MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 - MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 - MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 - MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 - MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 - MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 - MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 - MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x4000007f - MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x4000007f - >; - }; - pinctrl_i2c4: i2c4grp { fsl,pins = < MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f @@ -354,28 +243,6 @@ >; }; - pinctrl_sai1: sai1grp { - fsl,pins = < - MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f - MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f - MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 - MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f - >; - }; - - pinctrl_uart5: uart5grp { - fsl,pins = < - MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79 - MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79 - >; - }; - - pinctrl_usbotg1_pwr: usbotg_pwr { - fsl,pins = < - MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14 - >; - }; - pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX7D_PAD_SD2_CMD__SD2_CMD 0x59 diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 4d308d17f040..200714e3feea 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -63,6 +63,13 @@ }; }; + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY2_CLK>; + clock-names = "main_clk"; + #phy-cells = <0>; + }; + soc { etm@3007d000 { compatible = "arm,coresight-etm3x", "arm,primecell"; @@ -105,18 +112,14 @@ reg = <0x30b20200 0x200>; }; - usbphynop2: usbphynop2 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX7D_USB_PHY2_CLK>; - clock-names = "main_clk"; - }; - fec2: ethernet@30bf0000 { compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; reg = <0x30bf0000 0x10000>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + interrupt-names = "int0", "int1", "int2", "pps"; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, <&clks IMX7D_ENET_AXI_ROOT_CLK>, <&clks IMX7D_ENET2_TIME_ROOT_CLK>, @@ -129,7 +132,7 @@ status = "disabled"; }; - pcie: pcie@0x33800000 { + pcie: pcie@33800000 { compatible = "fsl,imx7d-pcie", "snps,dw-pcie"; reg = <0x33800000 0x4000>, <0x4ff00000 0x80000>; @@ -137,6 +140,7 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; + bus-range = <0x00 0xff>; ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ num-lanes = <1>; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 82ad26e766eb..9aa2bb998552 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -116,6 +116,66 @@ clock-output-names = "osc"; }; + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY1_CLK>; + clock-names = "main_clk"; + #phy-cells = <0>; + }; + + usbphynop3: usbphynop3 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; + clock-names = "main_clk"; + #phy-cells = <0>; + }; + + + replicator { + /* + * non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell" + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etr_in_port>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etf_out_port>; + }; + }; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -260,43 +320,6 @@ }; }; - replicator { - /* - * non-configurable replicators don't show up on the - * AMBA bus. As such no need to add "arm,primecell" - */ - compatible = "arm,coresight-replicator"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* replicator output ports */ - port@0 { - reg = <0>; - replicator_out_port0: endpoint { - remote-endpoint = <&tpiu_in_port>; - }; - }; - - port@1 { - reg = <1>; - replicator_out_port1: endpoint { - remote-endpoint = <&etr_in_port>; - }; - }; - - /* replicator input port */ - port@2 { - reg = <0>; - replicator_in_port0: endpoint { - slave-mode; - remote-endpoint = <&etf_out_port>; - }; - }; - }; - }; - intc: interrupt-controller@31001000 { compatible = "arm,cortex-a7-gic"; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; @@ -309,15 +332,6 @@ <0x31006000 0x2000>; }; - timer { - compatible = "arm,armv7-timer"; - interrupt-parent = <&intc>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - aips1: aips-bus@30000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -508,8 +522,11 @@ reg = <0x30360000 0x10000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; - reg_1p0d: regulator-vdd1p0d { + reg_1p0d: regulator-vdd1p0d@30360210 { + reg = <0x30360210>; compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p0d"; regulator-min-microvolt = <800000>; @@ -583,9 +600,9 @@ #address-cells = <1>; #size-cells = <0>; - pgc_pcie_phy: pgc-power-domain@IMX7_POWER_DOMAIN_PCIE_PHY { + pgc_pcie_phy: pgc-power-domain@1 { #power-domain-cells = <0>; - reg = <IMX7_POWER_DOMAIN_PCIE_PHY>; + reg = <1>; power-supply = <®_1p0d>; }; }; @@ -945,18 +962,6 @@ reg = <0x30b30200 0x200>; }; - usbphynop1: usbphynop1 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX7D_USB_PHY1_CLK>; - clock-names = "main_clk"; - }; - - usbphynop3: usbphynop3 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; - clock-names = "main_clk"; - }; - usdhc1: usdhc@30b40000 { compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b40000 0x10000>; @@ -1007,9 +1012,11 @@ fec1: ethernet@30be0000 { compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; reg = <0x30be0000 0x10000>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + interrupt-names = "int0", "int1", "int2", "pps"; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, <&clks IMX7D_ENET_AXI_ROOT_CLK>, <&clks IMX7D_ENET1_TIME_ROOT_CLK>, diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts new file mode 100644 index 000000000000..d01f64b252b1 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts @@ -0,0 +1,241 @@ +/* + * Copyright (C) 2017 Moxa Inc. - https://www.moxa.com/ + * + * Author: Harry YJ Jhou (周亞諄) <harryyj.jhou@moxa.com> + * Jimmy Chen (陳永達) <jimmy.chen@moxa.com> + * SZ Lin (林上智) <sz.lin@moxa.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "ls1021a.dtsi" + +/ { + model = "Moxa UC-8410A"; + + aliases { + enet0_rgmii_phy = &rgmii_phy0; + enet1_rgmii_phy = &rgmii_phy1; + enet2_rgmii_phy = &rgmii_phy2; + }; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + + cel-pwr { + label = "UC8410A:CEL-PWR"; + gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + cel-reset { + label = "UC8410A:CEL-RESET"; + gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + str-led { + label = "UC8410A:RED:PROG"; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + + sw-ready { + label = "UC8410A:GREEN:SWRDY"; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + beeper { + label = "UC8410A:BEEP"; + gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + prog-led0 { + label = "UC8410A:GREEN:PROG2"; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + prog-led1 { + label = "UC8410A:GREEN:PROG1"; + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + prog-led2 { + label = "UC8410A:GREEN:PROG0"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + wifi-signal0 { + label = "UC8410A:GREEN:CEL2"; + gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + wifi-signal1 { + label = "UC8410A:GREEN:CEL1"; + gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + wifi-signal2 { + label = "UC8410A:GREEN:CEL0"; + gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + cpu-diag-red { + label = "UC8410A:RED:DIA"; + gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + cpu-diag-green { + label = "UC8410A:GREEN:DIA"; + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + cpu-diag-yellow { + label = "UC8410A:YELLOW:DIA"; + gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pushbtn-key { + label = "push button key"; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + linux,code = <BTN_MISC>; + default-state = "on"; + }; + }; +}; + +&enet0 { + phy-handle = <&rgmii_phy0>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&enet1 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&enet2 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + + tpm@20 { + compatible = "infineon,slb9635tt"; + reg = <0x20>; + }; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@0 { + compatible = "marvell,88e1118"; + reg = <0x0>; + marvell,reg-init = + <3 0x11 0 0x4415>, /* Reg 3,17 */ + <3 0x10 0 0x77>; /* Reg 3,16 */ + }; + + rgmii_phy1: ethernet-phy@1 { + compatible = "marvell,88e1118"; + reg = <0x1>; + marvell,reg-init = + <3 0x11 0 0x4415>, /* Reg 3,17 */ + <3 0x10 0 0x77>; /* Reg 3,16 */ + }; + + rgmii_phy2: ethernet-phy@2 { + compatible = "marvell,88e1118"; + reg = <0x2>; + marvell,reg-init = + <3 0x11 0 0x4415>, /* Reg 3,17 */ + <3 0x10 0 0x77>; /* Reg 3,16 */ + }; +}; + +&qspi { + bus-num = <0>; + fsl,spi-num-chipselects = <2>; + fsl,spi-flash-chipselects = <0>; + fsl,qspi-has-second-chip; + status = "okay"; + + flash: flash@0 { + compatible = "spansion,s25fl064l", "spansion,s25fl164k"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + + partitions@0 { + label = "U-Boot"; + reg = <0x0 0x180000>; + }; + + partitions@180000 { + label = "U-Boot Env"; + reg = <0x180000 0x680000>; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts index 940875316d0f..bf15dc27ca53 100644 --- a/arch/arm/boot/dts/ls1021a-qds.dts +++ b/arch/arm/boot/dts/ls1021a-qds.dts @@ -215,7 +215,7 @@ reg = <0x2a>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; - clocks = <&sys_mclk 1>; + clocks = <&sys_mclk>; }; }; }; @@ -239,6 +239,11 @@ device-width = <1>; }; + nand@2,0 { + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + fpga: board-control@3,0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index a8b148ad1dd2..b186c370ad54 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -187,7 +187,7 @@ reg = <0x0a>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; - clocks = <&sys_mclk 1>; + clocks = <&sys_mclk>; }; }; @@ -228,6 +228,10 @@ }; }; +&esdhc { + status = "okay"; +}; + &sai1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 9319e1f0f1d8..c5edfa9a68a6 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -106,6 +106,14 @@ compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&dcfg>; + offset = <0xb0>; + mask = <0x02>; }; soc { @@ -154,8 +162,22 @@ big-endian; }; + qspi: quadspi@1550000 { + compatible = "fsl,ls1021a-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x1550000 0x0 0x10000>, + <0x0 0x40000000 0x0 0x40000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "qspi_en", "qspi"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + esdhc: esdhc@1560000 { - compatible = "fsl,esdhc"; + compatible = "fsl,ls1021a-esdhc", "fsl,esdhc"; reg = <0x0 0x1560000 0x0 0x10000>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <0>; @@ -575,7 +597,7 @@ fsl,tclk-period = <5>; fsl,tmr-prsc = <2>; fsl,tmr-add = <0xaaaaaaab>; - fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper1 = <999999995>; fsl,tmr-fiper2 = <99990>; fsl,max-adj = <499999999>; }; @@ -668,7 +690,7 @@ }; }; - usb@8600000 { + usb2: usb@8600000 { compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; reg = <0x0 0x8600000 0x0 0x1000>; interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; @@ -676,7 +698,7 @@ phy_type = "ulpi"; }; - usb3@3100000 { + usb3: usb3@3100000 { compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index 091b738041a0..d8b2972527eb 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -140,7 +140,7 @@ /* M41T0M6 real time clock on carrier board */ rtc: m41t0m6@68 { - compatible = "st,m41t00"; + compatible = "st,m41t0"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index 3d9896171bfc..348bcd30c0f7 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -58,7 +58,7 @@ soc { aips-bus@40000000 { - intc: interrupt-controller@40002000 { + intc: interrupt-controller@40003000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index acdf12ad0622..782b69a3acdf 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -255,16 +255,19 @@ port@0 { reg = <0>; label = "lan6"; + phy-handle = <&switch2phy0>; }; port@1 { reg = <1>; label = "lan7"; + phy-handle = <&switch2phy1>; }; port@2 { reg = <2>; label = "lan8"; + phy-handle = <&switch2phy2>; }; port@3 { @@ -304,6 +307,20 @@ }; }; }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch2phy0: phy@0 { + reg = <0>; + }; + switch2phy1: phy@1 { + reg = <1>; + }; + switch2phy2: phy@2 { + reg = <2>; + }; + }; }; }; @@ -371,7 +388,8 @@ reg = <0x22>; gpio-controller; #gpio-cells = <2>; - interrupt-parent = <&gpio2>; + interrupt-controller; + interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index 4b8edc8982cf..c6f134c78303 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -73,7 +73,7 @@ #size-cells = <0>; reg = <0>; dsa,member = <0 0>; - eeprom-length = <512>; + eeprom-length = <65536>; interrupt-parent = <&gpio0>; interrupts = <27 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; @@ -170,7 +170,7 @@ #size-cells = <0>; reg = <0>; dsa,member = <0 1>; - eeprom-length = <512>; + eeprom-length = <65536>; interrupt-parent = <&gpio0>; interrupts = <26 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi index 6b58d3a97992..aadd36db0092 100644 --- a/arch/arm/boot/dts/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -96,6 +96,10 @@ status = "okay"; }; +&edma1 { + status = "okay"; +}; + &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 5d654b5b4ce6..c3f09b737924 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -84,6 +84,11 @@ mask = <0x1000>; }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 16>, <&adc1 16>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -762,10 +767,5 @@ status = "disabled"; }; }; - - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&adc0 16>, <&adc1 16>; - }; }; }; |