diff options
Diffstat (limited to 'arch/x86/include/uapi')
| -rw-r--r-- | arch/x86/include/uapi/asm/debugreg.h | 21 | ||||
| -rw-r--r-- | arch/x86/include/uapi/asm/kvm.h | 72 | ||||
| -rw-r--r-- | arch/x86/include/uapi/asm/setup_data.h | 13 | ||||
| -rw-r--r-- | arch/x86/include/uapi/asm/svm.h | 2 | ||||
| -rw-r--r-- | arch/x86/include/uapi/asm/vmx.h | 5 |
5 files changed, 110 insertions, 3 deletions
diff --git a/arch/x86/include/uapi/asm/debugreg.h b/arch/x86/include/uapi/asm/debugreg.h index 0007ba077c0c..41da492dfb01 100644 --- a/arch/x86/include/uapi/asm/debugreg.h +++ b/arch/x86/include/uapi/asm/debugreg.h @@ -15,7 +15,26 @@ which debugging register was responsible for the trap. The other bits are either reserved or not of interest to us. */ -/* Define reserved bits in DR6 which are always set to 1 */ +/* + * Define bits in DR6 which are set to 1 by default. + * + * This is also the DR6 architectural value following Power-up, Reset or INIT. + * + * Note, with the introduction of Bus Lock Detection (BLD) and Restricted + * Transactional Memory (RTM), the DR6 register has been modified: + * + * 1) BLD flag (bit 11) is no longer reserved to 1 if the CPU supports + * Bus Lock Detection. The assertion of a bus lock could clear it. + * + * 2) RTM flag (bit 16) is no longer reserved to 1 if the CPU supports + * restricted transactional memory. #DB occurred inside an RTM region + * could clear it. + * + * Apparently, DR6.BLD and DR6.RTM are active low bits. + * + * As a result, DR6_RESERVED is an incorrect name now, but it is kept for + * compatibility. + */ #define DR6_RESERVED (0xFFFF0FF0) #define DR_TRAP0 (0x1) /* db0 */ diff --git a/arch/x86/include/uapi/asm/kvm.h b/arch/x86/include/uapi/asm/kvm.h index 460306b35a4b..6f3499507c5e 100644 --- a/arch/x86/include/uapi/asm/kvm.h +++ b/arch/x86/include/uapi/asm/kvm.h @@ -441,6 +441,7 @@ struct kvm_sync_regs { #define KVM_X86_QUIRK_MWAIT_NEVER_UD_FAULTS (1 << 6) #define KVM_X86_QUIRK_SLOT_ZAP_ALL (1 << 7) #define KVM_X86_QUIRK_STUFF_FEATURE_MSRS (1 << 8) +#define KVM_X86_QUIRK_IGNORE_GUEST_PAT (1 << 9) #define KVM_STATE_NESTED_FORMAT_VMX 0 #define KVM_STATE_NESTED_FORMAT_SVM 1 @@ -844,6 +845,7 @@ struct kvm_sev_snp_launch_start { }; /* Kept in sync with firmware values for simplicity. */ +#define KVM_SEV_PAGE_TYPE_INVALID 0x0 #define KVM_SEV_SNP_PAGE_TYPE_NORMAL 0x1 #define KVM_SEV_SNP_PAGE_TYPE_ZERO 0x3 #define KVM_SEV_SNP_PAGE_TYPE_UNMEASURED 0x4 @@ -930,4 +932,74 @@ struct kvm_hyperv_eventfd { #define KVM_X86_SNP_VM 4 #define KVM_X86_TDX_VM 5 +/* Trust Domain eXtension sub-ioctl() commands. */ +enum kvm_tdx_cmd_id { + KVM_TDX_CAPABILITIES = 0, + KVM_TDX_INIT_VM, + KVM_TDX_INIT_VCPU, + KVM_TDX_INIT_MEM_REGION, + KVM_TDX_FINALIZE_VM, + KVM_TDX_GET_CPUID, + + KVM_TDX_CMD_NR_MAX, +}; + +struct kvm_tdx_cmd { + /* enum kvm_tdx_cmd_id */ + __u32 id; + /* flags for sub-commend. If sub-command doesn't use this, set zero. */ + __u32 flags; + /* + * data for each sub-command. An immediate or a pointer to the actual + * data in process virtual address. If sub-command doesn't use it, + * set zero. + */ + __u64 data; + /* + * Auxiliary error code. The sub-command may return TDX SEAMCALL + * status code in addition to -Exxx. + */ + __u64 hw_error; +}; + +struct kvm_tdx_capabilities { + __u64 supported_attrs; + __u64 supported_xfam; + __u64 reserved[254]; + + /* Configurable CPUID bits for userspace */ + struct kvm_cpuid2 cpuid; +}; + +struct kvm_tdx_init_vm { + __u64 attributes; + __u64 xfam; + __u64 mrconfigid[6]; /* sha384 digest */ + __u64 mrowner[6]; /* sha384 digest */ + __u64 mrownerconfig[6]; /* sha384 digest */ + + /* The total space for TD_PARAMS before the CPUIDs is 256 bytes */ + __u64 reserved[12]; + + /* + * Call KVM_TDX_INIT_VM before vcpu creation, thus before + * KVM_SET_CPUID2. + * This configuration supersedes KVM_SET_CPUID2s for VCPUs because the + * TDX module directly virtualizes those CPUIDs without VMM. The user + * space VMM, e.g. qemu, should make KVM_SET_CPUID2 consistent with + * those values. If it doesn't, KVM may have wrong idea of vCPUIDs of + * the guest, and KVM may wrongly emulate CPUIDs or MSRs that the TDX + * module doesn't virtualize. + */ + struct kvm_cpuid2 cpuid; +}; + +#define KVM_TDX_MEASURE_MEMORY_REGION _BITULL(0) + +struct kvm_tdx_init_mem_region { + __u64 source_addr; + __u64 gpa; + __u64 nr_pages; +}; + #endif /* _ASM_X86_KVM_H */ diff --git a/arch/x86/include/uapi/asm/setup_data.h b/arch/x86/include/uapi/asm/setup_data.h index 50c45ead4e7c..2671c4e1b3a0 100644 --- a/arch/x86/include/uapi/asm/setup_data.h +++ b/arch/x86/include/uapi/asm/setup_data.h @@ -13,7 +13,8 @@ #define SETUP_CC_BLOB 7 #define SETUP_IMA 8 #define SETUP_RNG_SEED 9 -#define SETUP_ENUM_MAX SETUP_RNG_SEED +#define SETUP_KEXEC_KHO 10 +#define SETUP_ENUM_MAX SETUP_KEXEC_KHO #define SETUP_INDIRECT (1<<31) #define SETUP_TYPE_MAX (SETUP_ENUM_MAX | SETUP_INDIRECT) @@ -78,6 +79,16 @@ struct ima_setup_data { __u64 size; } __attribute__((packed)); +/* + * Locations of kexec handover metadata + */ +struct kho_data { + __u64 fdt_addr; + __u64 fdt_size; + __u64 scratch_addr; + __u64 scratch_size; +} __attribute__((packed)); + #endif /* __ASSEMBLER__ */ #endif /* _UAPI_ASM_X86_SETUP_DATA_H */ diff --git a/arch/x86/include/uapi/asm/svm.h b/arch/x86/include/uapi/asm/svm.h index ec1321248dac..9c640a521a67 100644 --- a/arch/x86/include/uapi/asm/svm.h +++ b/arch/x86/include/uapi/asm/svm.h @@ -95,6 +95,7 @@ #define SVM_EXIT_CR14_WRITE_TRAP 0x09e #define SVM_EXIT_CR15_WRITE_TRAP 0x09f #define SVM_EXIT_INVPCID 0x0a2 +#define SVM_EXIT_BUS_LOCK 0x0a5 #define SVM_EXIT_IDLE_HLT 0x0a6 #define SVM_EXIT_NPF 0x400 #define SVM_EXIT_AVIC_INCOMPLETE_IPI 0x401 @@ -225,6 +226,7 @@ { SVM_EXIT_CR4_WRITE_TRAP, "write_cr4_trap" }, \ { SVM_EXIT_CR8_WRITE_TRAP, "write_cr8_trap" }, \ { SVM_EXIT_INVPCID, "invpcid" }, \ + { SVM_EXIT_BUS_LOCK, "buslock" }, \ { SVM_EXIT_IDLE_HLT, "idle-halt" }, \ { SVM_EXIT_NPF, "npf" }, \ { SVM_EXIT_AVIC_INCOMPLETE_IPI, "avic_incomplete_ipi" }, \ diff --git a/arch/x86/include/uapi/asm/vmx.h b/arch/x86/include/uapi/asm/vmx.h index a5faf6d88f1b..f0f4a4cf84a7 100644 --- a/arch/x86/include/uapi/asm/vmx.h +++ b/arch/x86/include/uapi/asm/vmx.h @@ -34,6 +34,7 @@ #define EXIT_REASON_TRIPLE_FAULT 2 #define EXIT_REASON_INIT_SIGNAL 3 #define EXIT_REASON_SIPI_SIGNAL 4 +#define EXIT_REASON_OTHER_SMI 6 #define EXIT_REASON_INTERRUPT_WINDOW 7 #define EXIT_REASON_NMI_WINDOW 8 @@ -92,6 +93,7 @@ #define EXIT_REASON_TPAUSE 68 #define EXIT_REASON_BUS_LOCK 74 #define EXIT_REASON_NOTIFY 75 +#define EXIT_REASON_TDCALL 77 #define VMX_EXIT_REASONS \ { EXIT_REASON_EXCEPTION_NMI, "EXCEPTION_NMI" }, \ @@ -155,7 +157,8 @@ { EXIT_REASON_UMWAIT, "UMWAIT" }, \ { EXIT_REASON_TPAUSE, "TPAUSE" }, \ { EXIT_REASON_BUS_LOCK, "BUS_LOCK" }, \ - { EXIT_REASON_NOTIFY, "NOTIFY" } + { EXIT_REASON_NOTIFY, "NOTIFY" }, \ + { EXIT_REASON_TDCALL, "TDCALL" } #define VMX_EXIT_REASON_FLAGS \ { VMX_EXIT_REASONS_FAILED_VMENTRY, "FAILED_VMENTRY" } |