diff options
Diffstat (limited to 'arch/riscv/boot/dts/starfive')
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 69 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts | 53 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts | 30 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts | 23 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-pinfunc.h | 2 | ||||
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110.dtsi | 4 |
6 files changed, 149 insertions, 32 deletions
diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi index 48fb5091b817..2eaf01775ef5 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi @@ -8,6 +8,8 @@ #include "jh7110.dtsi" #include "jh7110-pinfunc.h" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/starfive,jh7110-pinctrl.h> / { aliases { @@ -28,6 +30,7 @@ memory@40000000 { device_type = "memory"; reg = <0x0 0x40000000 0x1 0x0>; + bootph-pre-ram; }; gpio-restart { @@ -36,6 +39,14 @@ priority = <224>; }; + leds { + compatible = "gpio-leds"; + + led_status_power: led-0 { + gpios = <&aongpio 3 GPIO_ACTIVE_HIGH>; + }; + }; + pwmdac_codec: audio-codec { compatible = "linux,spdif-dit"; #sound-dai-cells = <0>; @@ -233,7 +244,7 @@ regulator-always-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1540000>; - regulator-name = "vdd-cpu"; + regulator-name = "vdd_cpu"; }; emmc_vdd: aldo4 { @@ -245,6 +256,13 @@ }; }; }; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + bootph-pre-ram; + pagesize = <16>; + }; }; &i2c6 { @@ -262,6 +280,7 @@ assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; assigned-clock-rates = <50000000>; bus-width = <8>; + bootph-pre-ram; cap-mmc-highspeed; mmc-ddr-1_8v; mmc-hs200-1_8v; @@ -279,6 +298,7 @@ assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>; assigned-clock-rates = <50000000>; bus-width = <4>; + bootph-pre-ram; no-sdio; no-mmc; cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>; @@ -317,8 +337,9 @@ nor_flash: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - cdns,read-delay = <5>; - spi-max-frequency = <12000000>; + bootph-pre-ram; + cdns,read-delay = <2>; + spi-max-frequency = <100000000>; cdns,tshsl-ns = <1>; cdns,tsd2d-ns = <1>; cdns,tchsh-ns = <1>; @@ -350,18 +371,20 @@ &spi0 { pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - - spi_dev0: spi@0 { - compatible = "rohm,dh2228fv"; - reg = <0>; - spi-max-frequency = <10000000>; - }; }; &syscrg { - assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>, + assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_ROOT>, + <&syscrg JH7110_SYSCLK_BUS_ROOT>, + <&syscrg JH7110_SYSCLK_PERH_ROOT>, + <&syscrg JH7110_SYSCLK_QSPI_REF>, + <&syscrg JH7110_SYSCLK_CPU_CORE>, <&pllclk JH7110_PLLCLK_PLL0_OUT>; - assigned-clock-rates = <500000000>, <1500000000>; + assigned-clock-parents = <&pllclk JH7110_PLLCLK_PLL0_OUT>, + <&pllclk JH7110_PLLCLK_PLL2_OUT>, + <&pllclk JH7110_PLLCLK_PLL2_OUT>, + <&syscrg JH7110_SYSCLK_QSPI_REF_SRC>; + assigned-clock-rates = <0>, <0>, <0>, <0>, <500000000>, <1500000000>; }; &sysgpio { @@ -394,6 +417,8 @@ }; i2c5_pins: i2c5-0 { + bootph-pre-ram; + i2c-pins { pinmux = <GPIOMUX(19, GPOUT_LOW, GPOEN_SYS_I2C5_CLK, @@ -402,6 +427,7 @@ GPOEN_SYS_I2C5_DATA, GPI_SYS_I2C5_DATA)>; bias-disable; /* external pull-up */ + bootph-pre-ram; input-enable; input-schmitt-enable; }; @@ -434,16 +460,16 @@ }; mmc-pins { - pinmux = <PINMUX(64, 0)>, - <PINMUX(65, 0)>, - <PINMUX(66, 0)>, - <PINMUX(67, 0)>, - <PINMUX(68, 0)>, - <PINMUX(69, 0)>, - <PINMUX(70, 0)>, - <PINMUX(71, 0)>, - <PINMUX(72, 0)>, - <PINMUX(73, 0)>; + pinmux = <PINMUX(PAD_SD0_CLK, 0)>, + <PINMUX(PAD_SD0_CMD, 0)>, + <PINMUX(PAD_SD0_DATA0, 0)>, + <PINMUX(PAD_SD0_DATA1, 0)>, + <PINMUX(PAD_SD0_DATA2, 0)>, + <PINMUX(PAD_SD0_DATA3, 0)>, + <PINMUX(PAD_SD0_DATA4, 0)>, + <PINMUX(PAD_SD0_DATA5, 0)>, + <PINMUX(PAD_SD0_DATA6, 0)>, + <PINMUX(PAD_SD0_DATA7, 0)>; bias-pull-up; drive-strength = <12>; input-enable; @@ -630,6 +656,7 @@ }; &uart0 { + bootph-pre-ram; pinctrl-names = "default"; pinctrl-0 = <&uart0_pins>; status = "okay"; diff --git a/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts b/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts index 30b0715196b6..f2857d021d68 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts +++ b/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts @@ -11,7 +11,60 @@ compatible = "deepcomputing,fml13v01", "starfive,jh7110"; }; +&pcie1 { + perst-gpios = <&sysgpio 21 GPIO_ACTIVE_LOW>; + phys = <&pciephy1>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_pins>; + status = "okay"; +}; + +&sysgpio { + pcie1_pins: pcie1-0 { + clkreq-pins { + pinmux = <GPIOMUX(29, GPOUT_LOW, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-down; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + + wake-pins { + pinmux = <GPIOMUX(28, GPOUT_HIGH, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + + usb0_pins: usb0-0 { + vbus-pins { + pinmux = <GPIOMUX(25, GPOUT_SYS_USB_DRIVE_VBUS, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; +}; + &usb0 { dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; status = "okay"; }; + +&usb_cdns3 { + phys = <&usbphy0>, <&pciephy0>; + phy-names = "cdns3,usb2-phy", "cdns3,usb3-phy"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts index 0d248b671d4b..fdaf6b4557da 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts +++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts @@ -12,9 +12,9 @@ }; &gmac0 { - starfive,tx-use-rgmii-clk; assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>; assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>; + starfive,tx-use-rgmii-clk; status = "okay"; }; @@ -31,14 +31,14 @@ }; &phy0 { - motorcomm,tx-clk-adj-enabled; + rx-internal-delay-ps = <1500>; + tx-internal-delay-ps = <1500>; + motorcomm,rx-clk-drv-microamp = <3970>; + motorcomm,rx-data-drv-microamp = <2910>; motorcomm,tx-clk-10-inverted; motorcomm,tx-clk-100-inverted; motorcomm,tx-clk-1000-inverted; - motorcomm,rx-clk-drv-microamp = <3970>; - motorcomm,rx-data-drv-microamp = <2910>; - rx-internal-delay-ps = <1500>; - tx-internal-delay-ps = <1500>; + motorcomm,tx-clk-adj-enabled; }; &pwm { @@ -53,7 +53,23 @@ status = "okay"; }; +&sysgpio { + usb0_pins: usb0-0 { + vbus-pins { + pinmux = <GPIOMUX(25, GPOUT_SYS_USB_DRIVE_VBUS, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; +}; + &usb0 { - dr_mode = "peripheral"; + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; status = "okay"; }; diff --git a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts index fe4a490ecc61..31e825be2065 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts +++ b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts @@ -80,7 +80,28 @@ status = "okay"; }; +&sysgpio { + usb0_pins: usb0-0 { + vbus-pins { + pinmux = <GPIOMUX(25, GPOUT_SYS_USB_DRIVE_VBUS, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; +}; + &usb0 { - dr_mode = "peripheral"; + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; status = "okay"; }; + +&usb_cdns3 { + phys = <&usbphy0>, <&pciephy0>; + phy-names = "cdns3,usb2-phy", "cdns3,usb3-phy"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h b/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h index 256de17f5261..ae49c908e7fb 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h +++ b/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h @@ -89,7 +89,7 @@ #define GPOUT_SYS_SDIO1_DATA1 59 #define GPOUT_SYS_SDIO1_DATA2 60 #define GPOUT_SYS_SDIO1_DATA3 61 -#define GPOUT_SYS_SDIO1_DATA4 63 +#define GPOUT_SYS_SDIO1_DATA4 62 #define GPOUT_SYS_SDIO1_DATA5 63 #define GPOUT_SYS_SDIO1_DATA6 64 #define GPOUT_SYS_SDIO1_DATA7 65 diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index 0d8339357bad..0ba74ef04679 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -611,6 +611,8 @@ pciephy0: phy@10210000 { compatible = "starfive,jh7110-pcie-phy"; reg = <0x0 0x10210000 0x0 0x10000>; + starfive,sys-syscon = <&sys_syscon 0x18>; + starfive,stg-syscon = <&stg_syscon 0x148 0x1f4>; #phy-cells = <0>; }; @@ -1022,7 +1024,6 @@ snps,force_thresh_dma_mode; snps,axi-config = <&stmmac_axi_setup>; snps,tso; - snps,en-tx-lpi-clockgating; snps,txpbl = <16>; snps,rxpbl = <16>; starfive,syscon = <&aon_syscon 0xc 0x12>; @@ -1053,7 +1054,6 @@ snps,force_thresh_dma_mode; snps,axi-config = <&stmmac_axi_setup>; snps,tso; - snps,en-tx-lpi-clockgating; snps,txpbl = <16>; snps,rxpbl = <16>; starfive,syscon = <&sys_syscon 0x90 0x2>; |