diff options
Diffstat (limited to 'arch/riscv/boot/dts/microchip')
| -rw-r--r-- | arch/riscv/boot/dts/microchip/Makefile | 2 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts | 2 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/microchip/mpfs-disco-kit-fabric.dtsi | 58 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/microchip/mpfs-disco-kit.dts | 190 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/microchip/mpfs-icicle-kit-common.dtsi | 249 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi | 25 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/microchip/mpfs-icicle-kit-prod.dts | 23 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts | 244 |
8 files changed, 547 insertions, 246 deletions
diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile index f51aeeb9fd3b..345ed7a48cc1 100644 --- a/arch/riscv/boot/dts/microchip/Makefile +++ b/arch/riscv/boot/dts/microchip/Makefile @@ -1,6 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-beaglev-fire.dtb +dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-disco-kit.dtb dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb +dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-icicle-kit-prod.dtb dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp.dtb dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-sev-kit.dtb diff --git a/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts index 47cf693beb68..55e30f3636df 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts @@ -88,7 +88,7 @@ <53>, <53>, <53>, <53>, <53>, <53>, <53>, <53>, <53>, <53>, <53>, <53>; - ngpios=<32>; + ngpios = <32>; gpio-line-names = "P8_PIN3_USER_LED_0", "P8_PIN4_USER_LED_1", "P8_PIN5_USER_LED_2", "P8_PIN6_USER_LED_3", "P8_PIN7_USER_LED_4", "P8_PIN8_USER_LED_5", "P8_PIN9_USER_LED_6", "P8_PIN10_USER_LED_7", "P8_PIN11_USER_LED_8", diff --git a/arch/riscv/boot/dts/microchip/mpfs-disco-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-disco-kit-fabric.dtsi new file mode 100644 index 000000000000..ae8be7d6f392 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-disco-kit-fabric.dtsi @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2025 Microchip Technology Inc */ + +/ { + core_pwm0: pwm@40000000 { + compatible = "microchip,corepwm-rtl-v4"; + reg = <0x0 0x40000000 0x0 0xF0>; + microchip,sync-update-mask = /bits/ 32 <0>; + #pwm-cells = <3>; + clocks = <&ccc_sw CLK_CCC_PLL0_OUT3>; + status = "disabled"; + }; + + i2c2: i2c@40000200 { + compatible = "microchip,corei2c-rtl-v7"; + reg = <0x0 0x40000200 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&ccc_sw CLK_CCC_PLL0_OUT3>; + interrupt-parent = <&plic>; + interrupts = <122>; + clock-frequency = <100000>; + status = "disabled"; + }; + + ihc: mailbox { + compatible = "microchip,sbi-ipc"; + interrupt-parent = <&plic>; + interrupts = <180>, <179>, <178>, <177>; + interrupt-names = "hart-1", "hart-2", "hart-3", "hart-4"; + #mbox-cells = <1>; + status = "disabled"; + }; + + mailbox@50000000 { + compatible = "microchip,miv-ihc-rtl-v2"; + reg = <0x0 0x50000000 0x0 0x1c000>; + interrupt-parent = <&plic>; + interrupts = <180>, <179>, <178>, <177>; + interrupt-names = "hart-1", "hart-2", "hart-3", "hart-4"; + #mbox-cells = <1>; + microchip,ihc-chan-disabled-mask = /bits/ 16 <0>; + status = "disabled"; + }; + + refclk_ccc: clock-cccref { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; +}; + +&ccc_sw { + clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, + <&refclk_ccc>, <&refclk_ccc>; + clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1", + "dll0_ref", "dll1_ref"; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-disco-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-disco-kit.dts new file mode 100644 index 000000000000..c068b9bb5bfd --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-disco-kit.dts @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2025 Microchip Technology Inc */ + +/dts-v1/; + +#include "mpfs.dtsi" +#include "mpfs-disco-kit-fabric.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Microchip PolarFire-SoC Discovery Kit"; + compatible = "microchip,mpfs-disco-kit-reference-rtl-v2507", + "microchip,mpfs-disco-kit", + "microchip,mpfs"; + + aliases { + ethernet0 = &mac0; + serial4 = &mmuart4; + }; + + chosen { + stdout-path = "serial4:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-1 { + gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_AMBER>; + label = "led1"; + }; + + led-2 { + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_RED>; + label = "led2"; + }; + + led-3 { + gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_AMBER>; + label = "led3"; + }; + + led-4 { + gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_RED>; + label = "led4"; + }; + + led-5 { + gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_AMBER>; + label = "led5"; + }; + + led-6 { + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_RED>; + label = "led6"; + }; + + led-7 { + gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_AMBER>; + label = "led7"; + }; + + led-8 { + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_RED>; + label = "led8"; + }; + }; + + ddrc_cache_lo: memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hss_payload: region@bfc00000 { + reg = <0x0 0xbfc00000 0x0 0x400000>; + no-map; + }; + }; +}; + +&core_pwm0 { + status = "okay"; +}; + +&gpio1 { + interrupts = <27>, <28>, <29>, <30>, + <31>, <32>, <33>, <47>, + <35>, <36>, <37>, <38>, + <39>, <40>, <41>, <42>, + <43>, <44>, <45>, <46>, + <47>, <48>, <49>, <50>; + status = "okay"; +}; + +&gpio2 { + interrupts = <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&ihc { + status = "okay"; +}; + +&mac0 { + phy-mode = "sgmii"; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@b { + reg = <0xb>; + }; +}; + +&mbox { + status = "okay"; +}; + +&mmc { + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-mmc-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + no-1-8-v; + status = "okay"; +}; + +&mmuart1 { + status = "okay"; +}; + +&mmuart4 { + status = "okay"; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&refclk_ccc { + clock-frequency = <50000000>; +}; + +&rtc { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-common.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-common.dtsi new file mode 100644 index 000000000000..e01a216e6c3a --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-common.dtsi @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2025 Microchip Technology Inc */ + +/dts-v1/; + +#include "mpfs.dtsi" +#include "mpfs-icicle-kit-fabric.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + aliases { + ethernet0 = &mac1; + serial0 = &mmuart0; + serial1 = &mmuart1; + serial2 = &mmuart2; + serial3 = &mmuart3; + serial4 = &mmuart4; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-1 { + gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_RED>; + label = "led1"; + }; + + led-2 { + gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_RED>; + label = "led2"; + }; + + led-3 { + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_AMBER>; + label = "led3"; + }; + + led-4 { + gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_AMBER>; + label = "led4"; + }; + }; + + ddrc_cache_lo: memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; + }; + + ddrc_cache_hi: memory@1040000000 { + device_type = "memory"; + reg = <0x10 0x40000000 0x0 0x40000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hss_payload: region@bfc00000 { + reg = <0x0 0xbfc00000 0x0 0x400000>; + no-map; + }; + }; +}; + +&core_pwm0 { + status = "okay"; +}; + +&gpio2 { + interrupts = <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDREG"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDA25"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <10000>; + label = "VDD25"; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDA_REG"; + }; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&ihc { + status = "okay"; +}; + +&mac0 { + phy-mode = "sgmii"; + phy-handle = <&phy0>; + status = "okay"; +}; + +&mac1 { + phy-mode = "sgmii"; + phy-handle = <&phy1>; + status = "okay"; + + phy1: ethernet-phy@9 { + reg = <9>; + }; + + phy0: ethernet-phy@8 { + reg = <8>; + }; +}; + +&mbox { + status = "okay"; +}; + +&mmc { + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&mmuart1 { + status = "okay"; +}; + +&mmuart2 { + status = "okay"; +}; + +&mmuart3 { + status = "okay"; +}; + +&mmuart4 { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&qspi { + status = "okay"; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&refclk_ccc { + clock-frequency = <50000000>; +}; + +&rtc { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; + +&syscontroller_qspi { + /* + * The flash *is* there, but Icicle kits that have engineering sample + * silicon (write?) access to this flash to non-functional. The system + * controller itself can actually access it, but the MSS cannot write + * an image there. Instantiating a coreQSPI in the fabric & connecting + * it to the flash instead should work though. Pre-production or later + * silicon does not have this issue. + */ + status = "disabled"; + + sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <1>; + reg = <0>; + }; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi index a6dda55a2d1d..71f724325578 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi @@ -2,9 +2,6 @@ /* Copyright (c) 2020-2021 Microchip Technology Inc */ / { - compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit", - "microchip,mpfs"; - core_pwm0: pwm@40000000 { compatible = "microchip,corepwm-rtl-v4"; reg = <0x0 0x40000000 0x0 0xF0>; @@ -26,6 +23,26 @@ status = "disabled"; }; + ihc: mailbox { + compatible = "microchip,sbi-ipc"; + interrupt-parent = <&plic>; + interrupts = <180>, <179>, <178>, <177>; + interrupt-names = "hart-1", "hart-2", "hart-3", "hart-4"; + #mbox-cells = <1>; + status = "disabled"; + }; + + mailbox@50000000 { + compatible = "microchip,miv-ihc-rtl-v2"; + reg = <0x0 0x50000000 0x0 0x1c000>; + interrupt-parent = <&plic>; + interrupts = <180>, <179>, <178>, <177>; + interrupt-names = "hart-1", "hart-2", "hart-3", "hart-4"; + #mbox-cells = <1>; + microchip,ihc-chan-disabled-mask = /bits/ 16 <0>; + status = "disabled"; + }; + pcie: pcie@3000000000 { compatible = "microchip,pcie-host-1.0"; #address-cells = <0x3>; @@ -57,7 +74,7 @@ }; }; - refclk_ccc: cccrefclk { + refclk_ccc: clock-cccref { compatible = "fixed-clock"; #clock-cells = <0>; }; diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-prod.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-prod.dts new file mode 100644 index 000000000000..8afedece89d1 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-prod.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2025 Microchip Technology Inc */ + +/dts-v1/; + +#include "mpfs-icicle-kit-common.dtsi" + +/ { + model = "Microchip PolarFire-SoC Icicle Kit (Production Silicon)"; + compatible = "microchip,mpfs-icicle-prod-reference-rtl-v2507", + "microchip,mpfs-icicle-kit-prod", + "microchip,mpfs-icicle-kit", + "microchip,mpfs-prod", + "microchip,mpfs"; +}; + +&syscontroller { + microchip,bitstream-flash = <&sys_ctrl_flash>; +}; + +&syscontroller_qspi { + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts index f80df225f72b..556aa9638282 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts @@ -3,249 +3,11 @@ /dts-v1/; -#include "mpfs.dtsi" -#include "mpfs-icicle-kit-fabric.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> +#include "mpfs-icicle-kit-common.dtsi" / { model = "Microchip PolarFire-SoC Icicle Kit"; - compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit", + compatible = "microchip,mpfs-icicle-es-reference-rtl-v2507", + "microchip,mpfs-icicle-kit", "microchip,mpfs"; - - aliases { - ethernet0 = &mac1; - serial0 = &mmuart0; - serial1 = &mmuart1; - serial2 = &mmuart2; - serial3 = &mmuart3; - serial4 = &mmuart4; - }; - - chosen { - stdout-path = "serial1:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - led-1 { - gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_RED>; - label = "led1"; - }; - - led-2 { - gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_RED>; - label = "led2"; - }; - - led-3 { - gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_AMBER>; - label = "led3"; - }; - - led-4 { - gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_AMBER>; - label = "led4"; - }; - }; - - ddrc_cache_lo: memory@80000000 { - device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x40000000>; - status = "okay"; - }; - - ddrc_cache_hi: memory@1040000000 { - device_type = "memory"; - reg = <0x10 0x40000000 0x0 0x40000000>; - status = "okay"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - hss_payload: region@BFC00000 { - reg = <0x0 0xBFC00000 0x0 0x400000>; - no-map; - }; - }; -}; - -&core_pwm0 { - status = "okay"; -}; - -&gpio2 { - interrupts = <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; - - power-monitor@10 { - compatible = "microchip,pac1934"; - reg = <0x10>; - - #address-cells = <1>; - #size-cells = <0>; - - channel@1 { - reg = <0x1>; - shunt-resistor-micro-ohms = <10000>; - label = "VDDREG"; - }; - - channel@2 { - reg = <0x2>; - shunt-resistor-micro-ohms = <10000>; - label = "VDDA25"; - }; - - channel@3 { - reg = <0x3>; - shunt-resistor-micro-ohms = <10000>; - label = "VDD25"; - }; - - channel@4 { - reg = <0x4>; - shunt-resistor-micro-ohms = <10000>; - label = "VDDA_REG"; - }; - }; -}; - -&i2c2 { - status = "okay"; -}; - -&mac0 { - phy-mode = "sgmii"; - phy-handle = <&phy0>; - status = "okay"; -}; - -&mac1 { - phy-mode = "sgmii"; - phy-handle = <&phy1>; - status = "okay"; - - phy1: ethernet-phy@9 { - reg = <9>; - }; - - phy0: ethernet-phy@8 { - reg = <8>; - }; -}; - -&mbox { - status = "okay"; -}; - -&mmc { - bus-width = <4>; - disable-wp; - cap-sd-highspeed; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; - -&mmuart1 { - status = "okay"; -}; - -&mmuart2 { - status = "okay"; -}; - -&mmuart3 { - status = "okay"; -}; - -&mmuart4 { - status = "okay"; -}; - -&pcie { - status = "okay"; -}; - -&qspi { - status = "okay"; -}; - -&refclk { - clock-frequency = <125000000>; -}; - -&refclk_ccc { - clock-frequency = <50000000>; -}; - -&rtc { - status = "okay"; -}; - -&spi0 { - status = "okay"; -}; - -&spi1 { - status = "okay"; -}; - -&syscontroller { - status = "okay"; -}; - -&syscontroller_qspi { - /* - * The flash *is* there, but Icicle kits that have engineering sample - * silicon (write?) access to this flash to non-functional. The system - * controller itself can actually access it, but the MSS cannot write - * an image there. Instantiating a coreQSPI in the fabric & connecting - * it to the flash instead should work though. Pre-production or later - * silicon does not have this issue. - */ - status = "disabled"; - - sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <20000000>; - spi-rx-bus-width = <1>; - reg = <0>; - }; -}; - -&usb { - status = "okay"; - dr_mode = "host"; }; |