diff options
Diffstat (limited to 'arch/powerpc/platforms/powermac/pci.c')
| -rw-r--r-- | arch/powerpc/platforms/powermac/pci.c | 68 |
1 files changed, 46 insertions, 22 deletions
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index d524a915aa86..556b349797e8 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -46,6 +46,9 @@ static int has_uninorth; static struct pci_controller *u3_agp; static struct pci_controller *u4_pcie; static struct pci_controller *u3_ht; +#define has_second_ohare 0 +#else +static int has_second_ohare; #endif /* CONFIG_PPC64 */ extern u8 pci_cache_line_size; @@ -647,6 +650,33 @@ static void __init init_p2pbridge(void) early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val); } +static void __init init_second_ohare(void) +{ + struct device_node *np = of_find_node_by_name(NULL, "pci106b,7"); + unsigned char bus, devfn; + unsigned short cmd; + + if (np == NULL) + return; + + /* This must run before we initialize the PICs since the second + * ohare hosts a PIC that will be accessed there. + */ + if (pci_device_from_OF_node(np, &bus, &devfn) == 0) { + struct pci_controller* hose = + pci_find_hose_for_OF_device(np); + if (!hose) { + printk(KERN_ERR "Can't find PCI hose for OHare2 !\n"); + return; + } + early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + cmd &= ~PCI_COMMAND_IO; + early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd); + } + has_second_ohare = 1; +} + /* * Some Apple desktop machines have a NEC PD720100A USB2 controller * on the motherboard. Open Firmware, on these, will disable the @@ -688,9 +718,6 @@ static void __init fixup_nec_usb2(void) " EHCI, fixing up...\n"); data &= ~1UL; early_write_config_dword(hose, bus, devfn, 0xe4, data); - early_write_config_byte(hose, bus, - devfn | 2, PCI_INTERRUPT_LINE, - nec->intrs[0].line); } } } @@ -958,32 +985,28 @@ static int __init add_bridge(struct device_node *dev) return 0; } -static void __init pcibios_fixup_OF_interrupts(void) +void __init pmac_pcibios_fixup(void) { struct pci_dev* dev = NULL; - /* - * Open Firmware often doesn't initialize the - * PCI_INTERRUPT_LINE config register properly, so we - * should find the device node and apply the interrupt - * obtained from the OF device-tree - */ for_each_pci_dev(dev) { - struct device_node *node; - node = pci_device_to_OF_node(dev); - /* this is the node, see if it has interrupts */ - if (node && node->n_intrs > 0) - dev->irq = node->intrs[0].line; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + /* Read interrupt from the device-tree */ + pci_read_irq_line(dev); + + /* Fixup interrupt for the modem/ethernet combo controller. + * on machines with a second ohare chip. + * The number in the device tree (27) is bogus (correct for + * the ethernet-only board but not the combo ethernet/modem + * board). The real interrupt is 28 on the second controller + * -> 28+32 = 60. + */ + if (has_second_ohare && + dev->vendor == PCI_VENDOR_ID_DEC && + dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS) + dev->irq = irq_create_mapping(NULL, 60, 0); } } -void __init pmac_pcibios_fixup(void) -{ - /* Fixup interrupts according to OF tree */ - pcibios_fixup_OF_interrupts(); -} - #ifdef CONFIG_PPC64 static void __init pmac_fixup_phb_resources(void) { @@ -1071,6 +1094,7 @@ void __init pmac_pci_init(void) #else /* CONFIG_PPC64 */ init_p2pbridge(); + init_second_ohare(); fixup_nec_usb2(); /* We are still having some issues with the Xserve G4, enabling |