diff options
Diffstat (limited to 'arch/arm')
800 files changed, 36823 insertions, 30809 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9f1f09a2bc9b..45df48ba0b12 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1,8 +1,8 @@ config ARM bool default y - select ARCH_BINFMT_ELF_RANDOMIZE_PIE select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE + select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_HAVE_CUSTOM_GPIO_H select ARCH_HAS_GCOV_PROFILE_ALL @@ -21,6 +21,7 @@ config ARM select GENERIC_IDLE_POLL_SETUP select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW + select GENERIC_IRQ_SHOW_LEVEL select GENERIC_PCI_IOMAP select GENERIC_SCHED_CLOCK select GENERIC_SMP_IDLE_THREAD @@ -286,6 +287,11 @@ config GENERIC_BUG def_bool y depends on BUG +config PGTABLE_LEVELS + int + default 3 if ARM_LPAE + default 2 + source "init/Kconfig" source "kernel/Kconfig.freezer" @@ -356,19 +362,6 @@ config ARCH_VERSATILE help This enables support for ARM Ltd Versatile board. -config ARCH_AT91 - bool "Atmel AT91" - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select IRQ_DOMAIN - select NEED_MACH_IO_H if PCCARD - select PINCTRL - select PINCTRL_AT91 - select USE_OF - help - This enables support for systems based on Atmel - AT91RM9200, AT91SAM9 and SAMA5 processors. - config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" select ARCH_REQUIRE_GPIOLIB @@ -619,24 +612,13 @@ config ARCH_PXA select GENERIC_CLOCKEVENTS select GPIO_PXA select HAVE_IDE + select IRQ_DOMAIN select MULTI_IRQ_HANDLER select PLAT_PXA select SPARSE_IRQ help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -config ARCH_MSM - bool "Qualcomm MSM (non-multiplatform)" - select ARCH_REQUIRE_GPIOLIB - select COMMON_CLK - select GENERIC_CLOCKEVENTS - help - Support for Qualcomm MSM/QSD based systems. This runs on the - apps processor of the MSM/QSD and depends on a shared memory - interface to the modem processor which runs the baseband - stack and controls some vital subsystems - (clock and power control, etc). - config ARCH_SHMOBILE_LEGACY bool "Renesas ARM SoCs (non-multiplatform)" select ARCH_SHMOBILE @@ -646,7 +628,6 @@ config ARCH_SHMOBILE_LEGACY select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_MACH_CLKDEV select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 select MULTI_IRQ_HANDLER @@ -844,6 +825,8 @@ config ARCH_VIRT # source "arch/arm/mach-mvebu/Kconfig" +source "arch/arm/mach-alpine/Kconfig" + source "arch/arm/mach-asm9260/Kconfig" source "arch/arm/mach-at91/Kconfig" @@ -890,8 +873,6 @@ source "arch/arm/mach-ks8695/Kconfig" source "arch/arm/mach-meson/Kconfig" -source "arch/arm/mach-msm/Kconfig" - source "arch/arm/mach-moxart/Kconfig" source "arch/arm/mach-mv78xx0/Kconfig" @@ -1057,7 +1038,7 @@ config ARM_ERRATA_430973 depends on CPU_V7 help This option enables the workaround for the 430973 Cortex-A8 - (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb + r1p* erratum. If a code sequence containing an ARM/Thumb interworking branch is replaced with another code sequence at the same virtual address, whether due to self-modifying code or virtual to physical address re-mapping, Cortex-A8 does not recover from the @@ -1126,6 +1107,7 @@ config ARM_ERRATA_742231 config ARM_ERRATA_643719 bool "ARM errata: LoUIS bit field in CLIDR register is incorrect" depends on CPU_V7 && SMP + default y help This option enables the workaround for the 643719 Cortex-A9 (prior to r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR @@ -1343,7 +1325,7 @@ config SMP If you don't know what to do here, say N. config SMP_ON_UP - bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)" + bool "Allow booting SMP kernel on uniprocessor systems" depends on SMP && !XIP_KERNEL && MMU default y help @@ -1515,7 +1497,7 @@ config HZ_FIXED int default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \ ARCH_S5PV210 || ARCH_EXYNOS4 - default AT91_TIMER_HZ if ARCH_AT91 + default 128 if SOC_AT91RM9200 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY default 0 @@ -1848,35 +1830,6 @@ config ZBOOT_ROM Say Y here if you intend to execute your compressed kernel image (zImage) directly from ROM or flash. If unsure, say N. -choice - prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)" - depends on ZBOOT_ROM && ARCH_SH7372 - default ZBOOT_ROM_NONE - help - Include experimental SD/MMC loading code in the ROM-able zImage. - With this enabled it is possible to write the ROM-able zImage - kernel image to an MMC or SD card and boot the kernel straight - from the reset vector. At reset the processor Mask ROM will load - the first part of the ROM-able zImage which in turn loads the - rest the kernel image to RAM. - -config ZBOOT_ROM_NONE - bool "No SD/MMC loader in zImage (EXPERIMENTAL)" - help - Do not load image from SD or MMC - -config ZBOOT_ROM_MMCIF - bool "Include MMCIF loader in zImage (EXPERIMENTAL)" - help - Load image from MMCIF hardware block. - -config ZBOOT_ROM_SH_MOBILE_SDHI - bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)" - help - Load image from SDHI hardware block - -endchoice - config ARM_APPENDED_DTB bool "Use appended device tree blob to zImage (EXPERIMENTAL)" depends on OF @@ -2125,16 +2078,6 @@ menu "Userspace binary formats" source "fs/Kconfig.binfmt" -config ARTHUR - tristate "RISC OS personality" - depends on !AEABI - help - Say Y here to include the kernel code necessary if you want to run - Acorn RISC OS/Arthur binaries under Linux. This code is still very - experimental; if this sounds frightening, say N and sleep in peace. - You can also say M here to compile this support as a module (which - will be called arthur). - endmenu menu "Power management options" @@ -2160,6 +2103,8 @@ source "net/Kconfig" source "drivers/Kconfig" +source "drivers/firmware/Kconfig" + source "fs/Kconfig" source "arch/arm/Kconfig.debug" @@ -2167,6 +2112,9 @@ source "arch/arm/Kconfig.debug" source "security/Kconfig" source "crypto/Kconfig" +if CRYPTO +source "arch/arm/crypto/Kconfig" +endif source "lib/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 970de7518341..0c12ffb155a2 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -93,6 +93,14 @@ choice prompt "Kernel low-level debugging port" depends on DEBUG_LL + config DEBUG_ALPINE_UART0 + bool "Kernel low-level debugging messages via Alpine UART0" + depends on ARCH_ALPINE + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Alpine based platforms. + config DEBUG_ASM9260_UART bool "Kernel low-level debugging via asm9260 UART" depends on MACH_ASM9260 @@ -448,25 +456,6 @@ choice Say Y here if you want kernel low-level debugging support on MMP UART3. - config DEBUG_MSM_UART - bool "Kernel low-level debugging messages via MSM UART" - depends on ARCH_MSM - help - Say Y here if you want the debug print routines to direct - their output to the serial port on MSM devices. - - ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT # - MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1 - MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2 - MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3 - - MSM7X30 0xaca00000 0xe1000000 UART1 - MSM7X30 0xacb00000 0xe1000000 UART2 - MSM7X30 0xacc00000 0xe1000000 UART3 - - Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration - options based on your needs. - config DEBUG_QCOM_UARTDM bool "Kernel low-level debugging messages via QCOM UARTDM" depends on ARCH_QCOM @@ -806,7 +795,7 @@ choice via SCIF2 on Renesas R-Car H1 (R8A7779). config DEBUG_RCAR_GEN2_SCIF0 - bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793)" + bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793" depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793 help Say Y here if you want kernel low-level debugging support @@ -821,12 +810,11 @@ choice via SCIF2 on Renesas R-Car E2 (R8A7794). config DEBUG_RMOBILE_SCIFA0 - bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4/SH7372" - depends on ARCH_R8A73A4 || ARCH_SH7372 + bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4" + depends on ARCH_R8A73A4 help Say Y here if you want kernel low-level debugging support - via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4) or SH-Mobile - AP4 (SH7372). + via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4). config DEBUG_RMOBILE_SCIFA1 bool "Kernel low-level debugging messages via SCIFA1 on R8A7740" @@ -1295,7 +1283,7 @@ config DEBUG_LL_INCLUDE DEBUG_IMX6SL_UART || \ DEBUG_IMX6SX_UART default "debug/ks8695.S" if DEBUG_KS8695_UART - default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM + default "debug/msm.S" if DEBUG_QCOM_UARTDM default "debug/netx.S" if DEBUG_NETX_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2 @@ -1388,7 +1376,6 @@ config DEBUG_UART_PHYS default 0x80230000 if DEBUG_PICOXCELL_UART default 0x808c0000 if ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART - default 0xa9a00000 if DEBUG_MSM_UART default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1 default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX default 0xc0013000 if DEBUG_U300_UART @@ -1417,6 +1404,7 @@ config DEBUG_UART_PHYS default 0xf8b00000 if DEBUG_HIX5HD2_UART default 0xf991e000 if DEBUG_QCOM_UARTDM default 0xfcb00000 if DEBUG_HI3620_UART + default 0xfd883000 if DEBUG_ALPINE_UART0 default 0xfe800000 if ARCH_IOP32X default 0xff690000 if DEBUG_RK32_UART2 default 0xffc02000 if DEBUG_SOCFPGA_UART @@ -1433,7 +1421,7 @@ config DEBUG_UART_PHYS DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_LL_UART_EFM32 || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_MSM_UART || DEBUG_NETX_UART || \ + DEBUG_NETX_UART || \ DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \ DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \ DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \ @@ -1446,7 +1434,6 @@ config DEBUG_UART_VIRT hex "Virtual base address of debug UART" default 0xe0000a00 if DEBUG_NETX_UART default 0xe0010fe0 if ARCH_RPC - default 0xe1000000 if DEBUG_MSM_UART default 0xf0000be0 if ARCH_EBSA110 default 0xf0010000 if DEBUG_ASM9260_UART default 0xf01fb000 if DEBUG_NOMADIK_UART @@ -1483,6 +1470,7 @@ config DEBUG_UART_VIRT default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX default 0xfd000000 if ARCH_SPEAR13XX default 0xfd012000 if ARCH_MV78XX0 + default 0xfd883000 if DEBUG_ALPINE_UART0 default 0xfde12000 if ARCH_DOVE default 0xfe012000 if ARCH_ORION5X default 0xf31004c0 if DEBUG_MESON_UARTAO @@ -1526,7 +1514,7 @@ config DEBUG_UART_VIRT default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_MSM_UART || DEBUG_NETX_UART || \ + DEBUG_NETX_UART || \ DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 @@ -1543,7 +1531,7 @@ config DEBUG_UART_8250_WORD depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 depends on DEBUG_UART_8250_SHIFT >= 2 default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \ - ARCH_KEYSTONE || \ + ARCH_KEYSTONE || DEBUG_ALPINE_UART0 || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ DEBUG_DAVINCI_DA8XX_UART2 || \ DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \ @@ -1556,7 +1544,7 @@ config DEBUG_UART_8250_FLOW_CONTROL config DEBUG_UNCOMPRESS bool - depends on ARCH_MULTIPLATFORM || ARCH_MSM || PLAT_SAMSUNG + depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) help @@ -1573,7 +1561,8 @@ config DEBUG_UNCOMPRESS config UNCOMPRESS_INCLUDE string default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ - PLAT_SAMSUNG || ARCH_EFM32 + PLAT_SAMSUNG || ARCH_EFM32 || \ + ARCH_SHMOBILE_LEGACY default "mach/uncompress.h" config EARLY_PRINTK @@ -1610,59 +1599,6 @@ config DEBUG_SET_MODULE_RONX against certain classes of kernel exploits. If in doubt, say "N". -menuconfig CORESIGHT - bool "CoreSight Tracing Support" - select ARM_AMBA - help - This framework provides a kernel interface for the CoreSight debug - and trace drivers to register themselves with. It's intended to build - a topological view of the CoreSight components based on a DT - specification and configure the right serie of components when a - trace source gets enabled. - -if CORESIGHT -config CORESIGHT_LINKS_AND_SINKS - bool "CoreSight Link and Sink drivers" - help - This enables support for CoreSight link and sink drivers that are - responsible for transporting and collecting the trace data - respectively. Link and sinks are dynamically aggregated with a trace - entity at run time to form a complete trace path. - -config CORESIGHT_LINK_AND_SINK_TMC - bool "Coresight generic TMC driver" - depends on CORESIGHT_LINKS_AND_SINKS - help - This enables support for the Trace Memory Controller driver. Depending - on its configuration the device can act as a link (embedded trace router - - ETR) or sink (embedded trace FIFO). The driver complies with the - generic implementation of the component without special enhancement or - added features. - -config CORESIGHT_SINK_TPIU - bool "Coresight generic TPIU driver" - depends on CORESIGHT_LINKS_AND_SINKS - help - This enables support for the Trace Port Interface Unit driver, responsible - for bridging the gap between the on-chip coresight components and a trace - port collection engine, typically connected to an external host for use - case capturing more traces than the on-board coresight memory can handle. - -config CORESIGHT_SINK_ETBV10 - bool "Coresight ETBv1.0 driver" - depends on CORESIGHT_LINKS_AND_SINKS - help - This enables support for the Embedded Trace Buffer version 1.0 driver - that complies with the generic implementation of the component without - special enhancement or added features. +source "drivers/hwtracing/coresight/Kconfig" -config CORESIGHT_SOURCE_ETM3X - bool "CoreSight Embedded Trace Macrocell 3.x driver" - select CORESIGHT_LINKS_AND_SINKS - help - This driver provides support for processor ETM3.x and PTM1.x modules, - which allows tracing the instructions that a processor is executing - This is primarily useful for instruction level tracing. Depending - the ETM version data tracing may also be available. -endif endmenu diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 7f99cd652203..985227cbbd1b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -13,7 +13,7 @@ # Ensure linker flags are correct LDFLAGS := -LDFLAGS_vmlinux :=-p --no-undefined -X +LDFLAGS_vmlinux :=-p --no-undefined -X --pic-veneer ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 LDFLAGS_MODULE += --be8 @@ -136,13 +136,13 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000 ifeq ($(CONFIG_ARCH_SA1100),y) textofs-$(CONFIG_SA1111) := 0x00208000 endif -textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. +machine-$(CONFIG_ARCH_ALPINE) += alpine machine-$(CONFIG_ARCH_AT91) += at91 machine-$(CONFIG_ARCH_AXXIA) += axxia machine-$(CONFIG_ARCH_BCM) += bcm @@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_BERLIN) += berlin machine-$(CONFIG_ARCH_CLPS711X) += clps711x machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx machine-$(CONFIG_ARCH_DAVINCI) += davinci +machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor machine-$(CONFIG_ARCH_DOVE) += dove machine-$(CONFIG_ARCH_EBSA110) += ebsa110 machine-$(CONFIG_ARCH_EFM32) += efm32 @@ -170,7 +171,6 @@ machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx machine-$(CONFIG_ARCH_MESON) += meson machine-$(CONFIG_ARCH_MMP) += mmp machine-$(CONFIG_ARCH_MOXART) += moxart -machine-$(CONFIG_ARCH_MSM) += msm machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0 machine-$(CONFIG_ARCH_MVEBU) += mvebu machine-$(CONFIG_ARCH_MXC) += imx @@ -263,6 +263,7 @@ core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ) core-$(CONFIG_VFP) += arch/arm/vfp/ core-$(CONFIG_XEN) += arch/arm/xen/ core-$(CONFIG_KVM_ARM_HOST) += arch/arm/kvm/ +core-$(CONFIG_VDSO) += arch/arm/vdso/ # If we have a machine-specific directory, then include it in the build. core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ @@ -320,6 +321,12 @@ dtbs: prepare scripts dtbs_install: $(Q)$(MAKE) $(dtbinst)=$(boot)/dts +PHONY += vdso_install +vdso_install: +ifeq ($(CONFIG_VDSO),y) + $(Q)$(MAKE) $(build)=arch/arm/vdso $@ +endif + # We use MRPROPER_FILES and CLEAN_FILES now archclean: $(Q)$(MAKE) $(clean)=$(boot) @@ -344,4 +351,5 @@ define archhelp echo ' Install using (your) ~/bin/$(INSTALLKERNEL) or' echo ' (distribution) /sbin/$(INSTALLKERNEL) or' echo ' install to $$(INSTALL_PATH) and run lilo' + echo ' vdso_install - Install unstripped vdso.so to $$(INSTALL_MOD_PATH)/vdso' endef diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index ec2f8065f955..9eca7aee927f 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -12,7 +12,7 @@ # ifneq ($(MACHINE),) -include $(srctree)/$(MACHINE)/Makefile.boot +include $(MACHINE)/Makefile.boot endif # Note: the following conditions must always be true: diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 3ea230aa94b7..6e1fb2b2ecc7 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -6,21 +6,6 @@ OBJS = -# Ensure that MMCIF loader code appears early in the image -# to minimise that number of bocks that have to be read in -# order to load it. -ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y) -OBJS += mmcif-sh7372.o -endif - -# Ensure that SDHI loader code appears early in the image -# to minimise that number of bocks that have to be read in -# order to load it. -ifeq ($(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI),y) -OBJS += sdhi-shmobile.o -OBJS += sdhi-sh7372.o -endif - AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET) HEAD = head.o OBJS += misc.o decompress.o diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S index e7f80928949c..22a75259faa3 100644 --- a/arch/arm/boot/compressed/head-shmobile.S +++ b/arch/arm/boot/compressed/head-shmobile.S @@ -25,36 +25,6 @@ /* load board-specific initialization code */ #include <mach/zboot.h> -#if defined(CONFIG_ZBOOT_ROM_MMCIF) || defined(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI) - /* Load image from MMC/SD */ - adr sp, __tmp_stack + 256 - ldr r0, __image_start - ldr r1, __image_end - subs r1, r1, r0 - ldr r0, __load_base - bl mmc_loader - - /* Jump to loaded code */ - ldr r0, __loaded - ldr r1, __image_start - sub r0, r0, r1 - ldr r1, __load_base - add pc, r0, r1 - -__image_start: - .long _start -__image_end: - .long _got_end -__load_base: - .long MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM -__loaded: - .long __continue - .align -__tmp_stack: - .space 256 -__continue: -#endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */ - adr r0, dtb_info ldmia r0, {r1, r3, r4, r5, r7} diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index c41a793b519c..2c45b5709fa4 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -10,8 +10,11 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/v7m.h> + + AR_CLASS( .arch armv7-a ) + M_CLASS( .arch armv7-m ) - .arch armv7-a /* * Debugging stuff * @@ -114,7 +117,12 @@ * sort out different calling conventions */ .align - .arm @ Always enter in ARM state + /* + * Always enter in ARM state for CPUs that support the ARM ISA. + * As of today (2014) that's exactly the members of the A and R + * classes. + */ + AR_CLASS( .arm ) start: .type start,#function .rept 7 @@ -132,14 +140,15 @@ start: THUMB( .thumb ) 1: - ARM_BE8( setend be ) @ go BE8 if compiled for BE8 - mrs r9, cpsr + ARM_BE8( setend be ) @ go BE8 if compiled for BE8 + AR_CLASS( mrs r9, cpsr ) #ifdef CONFIG_ARM_VIRT_EXT bl __hyp_stub_install @ get into SVC mode, reversibly #endif mov r7, r1 @ save architecture ID mov r8, r2 @ save atags pointer +#ifndef CONFIG_CPU_V7M /* * Booting from Angel - need to enter SVC mode and disable * FIQs/IRQs (numeric definitions from angel arm.h source). @@ -155,6 +164,7 @@ not_angel: safe_svcmode_maskall r0 msr spsr_cxsf, r9 @ Save the CPU boot mode in @ SPSR +#endif /* * Note that some cache flushing and other stuff may * be needed here - is there an Angel SWI call for this? @@ -168,9 +178,26 @@ not_angel: .text #ifdef CONFIG_AUTO_ZRELADDR - @ determine final kernel image address + /* + * Find the start of physical memory. As we are executing + * without the MMU on, we are in the physical address space. + * We just need to get rid of any offset by aligning the + * address. + * + * This alignment is a balance between the requirements of + * different platforms - we have chosen 128MB to allow + * platforms which align the start of their physical memory + * to 128MB to use this feature, while allowing the zImage + * to be placed within the first 128MB of memory on other + * platforms. Increasing the alignment means we place + * stricter alignment requirements on the start of physical + * memory, but relaxing it means that we break people who + * are already placing their zImage in (eg) the top 64MB + * of this range. + */ mov r4, pc and r4, r4, #0xf8000000 + /* Determine final kernel image address. */ add r4, r4, #TEXT_OFFSET #else ldr r4, =zreladdr @@ -810,6 +837,16 @@ __common_mmu_cache_on: call_cache_fn: adr r12, proc_types #ifdef CONFIG_CPU_CP15 mrc p15, 0, r9, c0, c0 @ get processor ID +#elif defined(CONFIG_CPU_V7M) + /* + * On v7-M the processor id is located in the V7M_SCB_CPUID + * register, but as cache handling is IMPLEMENTATION DEFINED on + * v7-M (if existant at all) we just return early here. + * If V7M_SCB_CPUID were used the cpu ID functions (i.e. + * __armv7_mmu_cache_{on,off,flush}) would be selected which + * use cp15 registers that are not implemented on v7-M. + */ + bx lr #else ldr r9, =CONFIG_PROCESSOR_ID #endif @@ -1310,8 +1347,9 @@ __hyp_reentry_vectors: __enter_kernel: mov r0, #0 @ must be 0 - ARM( mov pc, r4 ) @ call kernel - THUMB( bx r4 ) @ entry point is always ARM + ARM( mov pc, r4 ) @ call kernel + M_CLASS( add r4, r4, #1 ) @ enter in Thumb mode for M class + THUMB( bx r4 ) @ entry point is always ARM for A/R classes reloc_code_end: diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c deleted file mode 100644 index 672ae95db5c3..000000000000 --- a/arch/arm/boot/compressed/mmcif-sh7372.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * sh7372 MMCIF loader - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2010 Simon Horman - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/mmc/sh_mmcif.h> -#include <linux/mmc/boot.h> -#include <mach/mmc.h> - -#define MMCIF_BASE (void __iomem *)0xe6bd0000 - -#define PORT84CR (void __iomem *)0xe6050054 -#define PORT85CR (void __iomem *)0xe6050055 -#define PORT86CR (void __iomem *)0xe6050056 -#define PORT87CR (void __iomem *)0xe6050057 -#define PORT88CR (void __iomem *)0xe6050058 -#define PORT89CR (void __iomem *)0xe6050059 -#define PORT90CR (void __iomem *)0xe605005a -#define PORT91CR (void __iomem *)0xe605005b -#define PORT92CR (void __iomem *)0xe605005c -#define PORT99CR (void __iomem *)0xe6050063 - -#define SMSTPCR3 (void __iomem *)0xe615013c - -/* SH7372 specific MMCIF loader - * - * loads the zImage from an MMC card starting from block 1. - * - * The image must be start with a vrl4 header and - * the zImage must start at offset 512 of the image. That is, - * at block 2 (=byte 1024) on the media - * - * Use the following line to write the vrl4 formated zImage - * to an MMC card - * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1 - */ -asmlinkage void mmc_loader(unsigned char *buf, unsigned long len) -{ - mmc_init_progress(); - mmc_update_progress(MMC_PROGRESS_ENTER); - - /* Initialise MMC - * registers: PORT84CR-PORT92CR - * (MMCD0_0-MMCD0_7,MMCCMD0 Control) - * value: 0x04 - select function 4 - */ - __raw_writeb(0x04, PORT84CR); - __raw_writeb(0x04, PORT85CR); - __raw_writeb(0x04, PORT86CR); - __raw_writeb(0x04, PORT87CR); - __raw_writeb(0x04, PORT88CR); - __raw_writeb(0x04, PORT89CR); - __raw_writeb(0x04, PORT90CR); - __raw_writeb(0x04, PORT91CR); - __raw_writeb(0x04, PORT92CR); - - /* Initialise MMC - * registers: PORT99CR (MMCCLK0 Control) - * value: 0x10 | 0x04 - enable output | select function 4 - */ - __raw_writeb(0x14, PORT99CR); - - /* Enable clock to MMC hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3); - - mmc_update_progress(MMC_PROGRESS_INIT); - - /* setup MMCIF hardware */ - sh_mmcif_boot_init(MMCIF_BASE); - - mmc_update_progress(MMC_PROGRESS_LOAD); - - /* load kernel via MMCIF interface */ - sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */ - (len + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS, buf); - - - /* Disable clock to MMC hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3); - - mmc_update_progress(MMC_PROGRESS_DONE); -} diff --git a/arch/arm/boot/compressed/sdhi-sh7372.c b/arch/arm/boot/compressed/sdhi-sh7372.c deleted file mode 100644 index d279294f2381..000000000000 --- a/arch/arm/boot/compressed/sdhi-sh7372.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * SuperH Mobile SDHI - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2010 Kuninori Morimoto - * Copyright (C) 2010 Simon Horman - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Parts inspired by u-boot - */ - -#include <linux/io.h> -#include <mach/mmc.h> -#include <linux/mmc/boot.h> -#include <linux/mmc/tmio.h> - -#include "sdhi-shmobile.h" - -#define PORT179CR 0xe60520b3 -#define PORT180CR 0xe60520b4 -#define PORT181CR 0xe60520b5 -#define PORT182CR 0xe60520b6 -#define PORT183CR 0xe60520b7 -#define PORT184CR 0xe60520b8 - -#define SMSTPCR3 0xe615013c - -#define CR_INPUT_ENABLE 0x10 -#define CR_FUNCTION1 0x01 - -#define SDHI1_BASE (void __iomem *)0xe6860000 -#define SDHI_BASE SDHI1_BASE - -/* SuperH Mobile SDHI loader - * - * loads the zImage from an SD card starting from block 0 - * on physical partition 1 - * - * The image must be start with a vrl4 header and - * the zImage must start at offset 512 of the image. That is, - * at block 1 (=byte 512) of physical partition 1 - * - * Use the following line to write the vrl4 formated zImage - * to an SD card - * # dd if=vrl4.out of=/dev/sdx bs=512 - */ -asmlinkage void mmc_loader(unsigned short *buf, unsigned long len) -{ - int high_capacity; - - mmc_init_progress(); - - mmc_update_progress(MMC_PROGRESS_ENTER); - /* Initialise SDHI1 */ - /* PORT184CR: GPIO_FN_SDHICMD1 Control */ - __raw_writeb(CR_FUNCTION1, PORT184CR); - /* PORT179CR: GPIO_FN_SDHICLK1 Control */ - __raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR); - /* PORT181CR: GPIO_FN_SDHID1_3 Control */ - __raw_writeb(CR_FUNCTION1, PORT183CR); - /* PORT182CR: GPIO_FN_SDHID1_2 Control */ - __raw_writeb(CR_FUNCTION1, PORT182CR); - /* PORT183CR: GPIO_FN_SDHID1_1 Control */ - __raw_writeb(CR_FUNCTION1, PORT181CR); - /* PORT180CR: GPIO_FN_SDHID1_0 Control */ - __raw_writeb(CR_FUNCTION1, PORT180CR); - - /* Enable clock to SDHI1 hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3); - - /* setup SDHI hardware */ - mmc_update_progress(MMC_PROGRESS_INIT); - high_capacity = sdhi_boot_init(SDHI_BASE); - if (high_capacity < 0) - goto err; - - mmc_update_progress(MMC_PROGRESS_LOAD); - /* load kernel */ - if (sdhi_boot_do_read(SDHI_BASE, high_capacity, - 0, /* Kernel is at block 1 */ - (len + TMIO_BBS - 1) / TMIO_BBS, buf)) - goto err; - - /* Disable clock to SDHI1 hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3); - - mmc_update_progress(MMC_PROGRESS_DONE); - - return; -err: - for(;;); -} diff --git a/arch/arm/boot/compressed/sdhi-shmobile.c b/arch/arm/boot/compressed/sdhi-shmobile.c deleted file mode 100644 index bd3d46980955..000000000000 --- a/arch/arm/boot/compressed/sdhi-shmobile.c +++ /dev/null @@ -1,449 +0,0 @@ -/* - * SuperH Mobile SDHI - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2010 Kuninori Morimoto - * Copyright (C) 2010 Simon Horman - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Parts inspired by u-boot - */ - -#include <linux/io.h> -#include <linux/mmc/host.h> -#include <linux/mmc/core.h> -#include <linux/mmc/mmc.h> -#include <linux/mmc/sd.h> -#include <linux/mmc/tmio.h> -#include <mach/sdhi.h> - -#define OCR_FASTBOOT (1<<29) -#define OCR_HCS (1<<30) -#define OCR_BUSY (1<<31) - -#define RESP_CMD12 0x00000030 - -static inline u16 sd_ctrl_read16(void __iomem *base, int addr) -{ - return __raw_readw(base + addr); -} - -static inline u32 sd_ctrl_read32(void __iomem *base, int addr) -{ - return __raw_readw(base + addr) | - __raw_readw(base + addr + 2) << 16; -} - -static inline void sd_ctrl_write16(void __iomem *base, int addr, u16 val) -{ - __raw_writew(val, base + addr); -} - -static inline void sd_ctrl_write32(void __iomem *base, int addr, u32 val) -{ - __raw_writew(val, base + addr); - __raw_writew(val >> 16, base + addr + 2); -} - -#define ALL_ERROR (TMIO_STAT_CMD_IDX_ERR | TMIO_STAT_CRCFAIL | \ - TMIO_STAT_STOPBIT_ERR | TMIO_STAT_DATATIMEOUT | \ - TMIO_STAT_RXOVERFLOW | TMIO_STAT_TXUNDERRUN | \ - TMIO_STAT_CMDTIMEOUT | TMIO_STAT_ILL_ACCESS | \ - TMIO_STAT_ILL_FUNC) - -static int sdhi_intr(void __iomem *base) -{ - unsigned long state = sd_ctrl_read32(base, CTL_STATUS); - - if (state & ALL_ERROR) { - sd_ctrl_write32(base, CTL_STATUS, ~ALL_ERROR); - sd_ctrl_write32(base, CTL_IRQ_MASK, - ALL_ERROR | - sd_ctrl_read32(base, CTL_IRQ_MASK)); - return -EINVAL; - } - if (state & TMIO_STAT_CMDRESPEND) { - sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND); - sd_ctrl_write32(base, CTL_IRQ_MASK, - TMIO_STAT_CMDRESPEND | - sd_ctrl_read32(base, CTL_IRQ_MASK)); - return 0; - } - if (state & TMIO_STAT_RXRDY) { - sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_RXRDY); - sd_ctrl_write32(base, CTL_IRQ_MASK, - TMIO_STAT_RXRDY | TMIO_STAT_TXUNDERRUN | - sd_ctrl_read32(base, CTL_IRQ_MASK)); - return 0; - } - if (state & TMIO_STAT_DATAEND) { - sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_DATAEND); - sd_ctrl_write32(base, CTL_IRQ_MASK, - TMIO_STAT_DATAEND | - sd_ctrl_read32(base, CTL_IRQ_MASK)); - return 0; - } - - return -EAGAIN; -} - -static int sdhi_boot_wait_resp_end(void __iomem *base) -{ - int err = -EAGAIN, timeout = 10000000; - - while (timeout--) { - err = sdhi_intr(base); - if (err != -EAGAIN) - break; - udelay(1); - } - - return err; -} - -/* SDHI_CLK_CTRL */ -#define CLK_MMC_ENABLE (1 << 8) -#define CLK_MMC_INIT (1 << 6) /* clk / 256 */ - -static void sdhi_boot_mmc_clk_stop(void __iomem *base) -{ - sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, 0x0000); - msleep(10); - sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, ~CLK_MMC_ENABLE & - sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL)); - msleep(10); -} - -static void sdhi_boot_mmc_clk_start(void __iomem *base) -{ - sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, CLK_MMC_ENABLE | - sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL)); - msleep(10); - sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, CLK_MMC_ENABLE); - msleep(10); -} - -static void sdhi_boot_reset(void __iomem *base) -{ - sd_ctrl_write16(base, CTL_RESET_SD, 0x0000); - msleep(10); - sd_ctrl_write16(base, CTL_RESET_SD, 0x0001); - msleep(10); -} - -/* Set MMC clock / power. - * Note: This controller uses a simple divider scheme therefore it cannot - * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as - * MMC wont run that fast, it has to be clocked at 12MHz which is the next - * slowest setting. - */ -static int sdhi_boot_mmc_set_ios(void __iomem *base, struct mmc_ios *ios) -{ - if (sd_ctrl_read32(base, CTL_STATUS) & TMIO_STAT_CMD_BUSY) - return -EBUSY; - - if (ios->clock) - sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, - ios->clock | CLK_MMC_ENABLE); - - /* Power sequence - OFF -> ON -> UP */ - switch (ios->power_mode) { - case MMC_POWER_OFF: /* power down SD bus */ - sdhi_boot_mmc_clk_stop(base); - break; - case MMC_POWER_ON: /* power up SD bus */ - break; - case MMC_POWER_UP: /* start bus clock */ - sdhi_boot_mmc_clk_start(base); - break; - } - - switch (ios->bus_width) { - case MMC_BUS_WIDTH_1: - sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x80e0); - break; - case MMC_BUS_WIDTH_4: - sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x00e0); - break; - } - - /* Let things settle. delay taken from winCE driver */ - udelay(140); - - return 0; -} - -/* These are the bitmasks the tmio chip requires to implement the MMC response - * types. Note that R1 and R6 are the same in this scheme. */ -#define RESP_NONE 0x0300 -#define RESP_R1 0x0400 -#define RESP_R1B 0x0500 -#define RESP_R2 0x0600 -#define RESP_R3 0x0700 -#define DATA_PRESENT 0x0800 -#define TRANSFER_READ 0x1000 - -static int sdhi_boot_request(void __iomem *base, struct mmc_command *cmd) -{ - int err, c = cmd->opcode; - - switch (mmc_resp_type(cmd)) { - case MMC_RSP_NONE: c |= RESP_NONE; break; - case MMC_RSP_R1: c |= RESP_R1; break; - case MMC_RSP_R1B: c |= RESP_R1B; break; - case MMC_RSP_R2: c |= RESP_R2; break; - case MMC_RSP_R3: c |= RESP_R3; break; - default: - return -EINVAL; - } - - /* No interrupts so this may not be cleared */ - sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND); - - sd_ctrl_write32(base, CTL_IRQ_MASK, TMIO_STAT_CMDRESPEND | - sd_ctrl_read32(base, CTL_IRQ_MASK)); - sd_ctrl_write32(base, CTL_ARG_REG, cmd->arg); - sd_ctrl_write16(base, CTL_SD_CMD, c); - - - sd_ctrl_write32(base, CTL_IRQ_MASK, - ~(TMIO_STAT_CMDRESPEND | ALL_ERROR) & - sd_ctrl_read32(base, CTL_IRQ_MASK)); - - err = sdhi_boot_wait_resp_end(base); - if (err) - return err; - - cmd->resp[0] = sd_ctrl_read32(base, CTL_RESPONSE); - - return 0; -} - -static int sdhi_boot_do_read_single(void __iomem *base, int high_capacity, - unsigned long block, unsigned short *buf) -{ - int err, i; - - /* CMD17 - Read */ - { - struct mmc_command cmd; - - cmd.opcode = MMC_READ_SINGLE_BLOCK | \ - TRANSFER_READ | DATA_PRESENT; - if (high_capacity) - cmd.arg = block; - else - cmd.arg = block * TMIO_BBS; - cmd.flags = MMC_RSP_R1; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - } - - sd_ctrl_write32(base, CTL_IRQ_MASK, - ~(TMIO_STAT_DATAEND | TMIO_STAT_RXRDY | - TMIO_STAT_TXUNDERRUN) & - sd_ctrl_read32(base, CTL_IRQ_MASK)); - err = sdhi_boot_wait_resp_end(base); - if (err) - return err; - - sd_ctrl_write16(base, CTL_SD_XFER_LEN, TMIO_BBS); - for (i = 0; i < TMIO_BBS / sizeof(*buf); i++) - *buf++ = sd_ctrl_read16(base, RESP_CMD12); - - err = sdhi_boot_wait_resp_end(base); - if (err) - return err; - - return 0; -} - -int sdhi_boot_do_read(void __iomem *base, int high_capacity, - unsigned long offset, unsigned short count, - unsigned short *buf) -{ - unsigned long i; - int err = 0; - - for (i = 0; i < count; i++) { - err = sdhi_boot_do_read_single(base, high_capacity, offset + i, - buf + (i * TMIO_BBS / - sizeof(*buf))); - if (err) - return err; - } - - return 0; -} - -#define VOLTAGES (MMC_VDD_32_33 | MMC_VDD_33_34) - -int sdhi_boot_init(void __iomem *base) -{ - bool sd_v2 = false, sd_v1_0 = false; - unsigned short cid; - int err, high_capacity = 0; - - sdhi_boot_mmc_clk_stop(base); - sdhi_boot_reset(base); - - /* mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 */ - { - struct mmc_ios ios; - ios.power_mode = MMC_POWER_ON; - ios.bus_width = MMC_BUS_WIDTH_1; - ios.clock = CLK_MMC_INIT; - err = sdhi_boot_mmc_set_ios(base, &ios); - if (err) - return err; - } - - /* CMD0 */ - { - struct mmc_command cmd; - msleep(1); - cmd.opcode = MMC_GO_IDLE_STATE; - cmd.arg = 0; - cmd.flags = MMC_RSP_NONE; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - msleep(2); - } - - /* CMD8 - Test for SD version 2 */ - { - struct mmc_command cmd; - cmd.opcode = SD_SEND_IF_COND; - cmd.arg = (VOLTAGES != 0) << 8 | 0xaa; - cmd.flags = MMC_RSP_R1; - err = sdhi_boot_request(base, &cmd); /* Ignore error */ - if ((cmd.resp[0] & 0xff) == 0xaa) - sd_v2 = true; - } - - /* CMD55 - Get OCR (SD) */ - { - int timeout = 1000; - struct mmc_command cmd; - - cmd.arg = 0; - - do { - cmd.opcode = MMC_APP_CMD; - cmd.flags = MMC_RSP_R1; - cmd.arg = 0; - err = sdhi_boot_request(base, &cmd); - if (err) - break; - - cmd.opcode = SD_APP_OP_COND; - cmd.flags = MMC_RSP_R3; - cmd.arg = (VOLTAGES & 0xff8000); - if (sd_v2) - cmd.arg |= OCR_HCS; - cmd.arg |= OCR_FASTBOOT; - err = sdhi_boot_request(base, &cmd); - if (err) - break; - - msleep(1); - } while((!(cmd.resp[0] & OCR_BUSY)) && --timeout); - - if (!err && timeout) { - if (!sd_v2) - sd_v1_0 = true; - high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS; - } - } - - /* CMD1 - Get OCR (MMC) */ - if (!sd_v2 && !sd_v1_0) { - int timeout = 1000; - struct mmc_command cmd; - - do { - cmd.opcode = MMC_SEND_OP_COND; - cmd.arg = VOLTAGES | OCR_HCS; - cmd.flags = MMC_RSP_R3; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - - msleep(1); - } while((!(cmd.resp[0] & OCR_BUSY)) && --timeout); - - if (!timeout) - return -EAGAIN; - - high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS; - } - - /* CMD2 - Get CID */ - { - struct mmc_command cmd; - cmd.opcode = MMC_ALL_SEND_CID; - cmd.arg = 0; - cmd.flags = MMC_RSP_R2; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - } - - /* CMD3 - * MMC: Set the relative address - * SD: Get the relative address - * Also puts the card into the standby state - */ - { - struct mmc_command cmd; - cmd.opcode = MMC_SET_RELATIVE_ADDR; - cmd.arg = 0; - cmd.flags = MMC_RSP_R1; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - cid = cmd.resp[0] >> 16; - } - - /* CMD9 - Get CSD */ - { - struct mmc_command cmd; - cmd.opcode = MMC_SEND_CSD; - cmd.arg = cid << 16; - cmd.flags = MMC_RSP_R2; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - } - - /* CMD7 - Select the card */ - { - struct mmc_command cmd; - cmd.opcode = MMC_SELECT_CARD; - //cmd.arg = rca << 16; - cmd.arg = cid << 16; - //cmd.flags = MMC_RSP_R1B; - cmd.flags = MMC_RSP_R1; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - } - - /* CMD16 - Set the block size */ - { - struct mmc_command cmd; - cmd.opcode = MMC_SET_BLOCKLEN; - cmd.arg = TMIO_BBS; - cmd.flags = MMC_RSP_R1; - err = sdhi_boot_request(base, &cmd); - if (err) - return err; - } - - return high_capacity; -} diff --git a/arch/arm/boot/compressed/sdhi-shmobile.h b/arch/arm/boot/compressed/sdhi-shmobile.h deleted file mode 100644 index 92eaa09f985e..000000000000 --- a/arch/arm/boot/compressed/sdhi-shmobile.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef SDHI_MOBILE_H -#define SDHI_MOBILE_H - -#include <linux/compiler.h> - -int sdhi_boot_do_read(void __iomem *base, int high_capacity, - unsigned long offset, unsigned short count, - unsigned short *buf); -int sdhi_boot_init(void __iomem *base); - -#endif diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a1c776b8dcec..86217db2937a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1,5 +1,7 @@ ifeq ($(CONFIG_OF),y) +dtb-$(CONFIG_ARCH_ALPINE) += \ + alpine-db.dtb dtb-$(CONFIG_MACH_ASM9260) += \ alphascale-asm9260-devkit.dtb # Keep at91 dtb files sorted alphabetically for each SoC @@ -42,6 +44,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ sama5d34ek.dtb \ sama5d35ek.dtb \ sama5d36ek.dtb \ + at91-sama5d4_xplained.dtb \ at91-sama5d4ek.dtb dtb-$(CONFIG_ARCH_ATLAS6) += \ atlas6-evb.dtb @@ -59,13 +62,15 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-netgear-r6300-v2.dtb \ bcm47081-asus-rt-n18u.dtb \ bcm47081-buffalo-wzr-600dhp2.dtb \ - bcm47081-buffalo-wzr-900dhp.dtb + bcm47081-buffalo-wzr-900dhp.dtb \ + bcm4709-netgear-r8000.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += \ bcm963138dvt.dtb dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ bcm911360_entphn.dtb \ bcm911360k.dtb \ - bcm958300k.dtb + bcm958300k.dtb \ + bcm958305k.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += \ bcm28155-ap.dtb \ bcm21664-garnet.dtb @@ -165,6 +170,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ kirkwood-mv88f6281gtw-ge.dtb \ + kirkwood-nas2big.dtb \ kirkwood-net2big.dtb \ kirkwood-net5big.dtb \ kirkwood-netgear_readynas_duo_v2.dtb \ @@ -199,6 +205,8 @@ dtb-$(CONFIG_ARCH_LPC32XX) += \ ea3250.dtb phy3250.dtb dtb-$(CONFIG_MACH_MESON6) += \ meson6-atv1200.dtb +dtb-$(CONFIG_MACH_MESON8) += \ + meson8-minix-neo-x8.dtb dtb-$(CONFIG_ARCH_MMP) += \ pxa168-aspenite.dtb \ pxa910-dkb.dtb \ @@ -299,9 +307,11 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ - imx6sl-evk.dtb + imx6sl-evk.dtb \ + imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sabreauto.dtb \ + imx6sx-sdb-reva.dtb \ imx6sx-sdb.dtb dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-qds.dtb \ @@ -386,6 +396,8 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-overo-storm-tobi.dtb \ omap3-overo-summit.dtb \ omap3-overo-tobi.dtb \ + omap3-pandora-600mhz.dtb \ + omap3-pandora-1ghz.dtb \ omap3-sbc-t3517.dtb \ omap3-sbc-t3530.dtb \ omap3-sbc-t3730.dtb \ @@ -401,7 +413,8 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-evmsk.dtb \ am335x-nano.dtb \ am335x-pepper.dtb \ - am335x-lxm.dtb + am335x-lxm.dtb \ + am335x-chiliboard.dtb dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-duovero-parlor.dtb \ omap4-panda.dtb \ @@ -464,25 +477,23 @@ dtb-$(CONFIG_ARCH_S5PV210) += \ s5pv210-smdkv210.dtb \ s5pv210-torbreck.dtb dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \ - r8a73a4-ape6evm.dtb \ - r8a73a4-ape6evm-reference.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7778-bockw-reference.dtb \ r8a7779-marzen.dtb \ - sh7372-mackerel.dtb \ - sh73a0-kzm9g.dtb \ - sh73a0-kzm9g-reference.dtb + sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ + r8a7778-bockw.dtb \ r8a7779-marzen.dtb \ r8a7790-lager.dtb \ r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ - r8a7794-alt.dtb + r8a7794-alt.dtb \ + sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ socfpga_arria10_socdk.dtb \ @@ -577,6 +588,7 @@ dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \ dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \ tegra124-jetson-tk1.dtb \ tegra124-nyan-big.dtb \ + tegra124-nyan-blaze.dtb \ tegra124-venice2.dtb dtb-$(CONFIG_ARCH_U300) += \ ste-u300.dtb @@ -624,11 +636,14 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \ armada-388-db.dtb \ armada-388-gp.dtb \ armada-388-rd.dtb +dtb-$(CONFIG_MACH_ARMADA_39X) += \ + armada-398-db.dtb dtb-$(CONFIG_MACH_ARMADA_XP) += \ armada-xp-axpwifiap.dtb \ armada-xp-db.dtb \ armada-xp-gp.dtb \ armada-xp-lenovo-ix4-300d.dtb \ + armada-xp-linksys-mamba.dtb \ armada-xp-matrix.dtb \ armada-xp-netgear-rn2120.dtb \ armada-xp-openblocks-ax3-4.dtb \ diff --git a/arch/arm/boot/dts/alpine-db.dts b/arch/arm/boot/dts/alpine-db.dts new file mode 100644 index 000000000000..dfb5a0802273 --- /dev/null +++ b/arch/arm/boot/dts/alpine-db.dts @@ -0,0 +1,35 @@ +/* + * Copyright 2015 Annapurna Labs Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * Alternatively, redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +/dts-v1/; + +#include "alpine.dtsi" + +/ { + model = "Annapurna Labs Alpine Dev Board"; + /* no need for anything outside SOC */ +}; + diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi new file mode 100644 index 000000000000..9af2d60e9a7f --- /dev/null +++ b/arch/arm/boot/dts/alpine.dtsi @@ -0,0 +1,160 @@ +/* + * Copyright 2015 Annapurna Labs Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * Alternatively, redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton64.dtsi" + +/ { + /* SOC compatibility */ + compatible = "al,alpine"; + + /* CPU Configuration */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "al,alpine-smp"; + + cpu@0 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0>; + clock-frequency = <0>; /* Filled by loader */ + }; + + cpu@1 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <1>; + clock-frequency = <0>; /* Filled by loader */ + }; + + cpu@2 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <2>; + clock-frequency = <0>; /* Filled by loader */ + }; + + cpu@3 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <3>; + clock-frequency = <0>; /* Filled by loader */ + }; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + arch-timer { + compatible = "arm,cortex-a15-timer", + "arm,armv7-timer"; + interrupts = + <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <0>; /* Filled by loader */ + }; + + /* Interrupt Controller */ + gic: gic@fb001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #size-cells = <0>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xfb001000 0x0 0x1000>, + <0x0 0xfb002000 0x0 0x2000>, + <0x0 0xfb004000 0x0 0x1000>, + <0x0 0xfb006000 0x0 0x2000>; + interrupts = + <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + /* CPU Resume registers */ + cpu-resume@fbff5ec0 { + compatible = "al,alpine-cpu-resume"; + reg = <0x0 0xfbff5ec0 0x0 0x30>; + }; + + /* North Bridge Service Registers */ + sysfabric-service@fb070000 { + compatible = "al,alpine-sysfabric-service", "syscon"; + reg = <0x0 0xfb070000 0x0 0x10000>; + }; + + /* Performance Monitor Unit */ + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + }; + + uart0:uart@fd883000 { + compatible = "ns16550a"; + reg = <0x0 0xfd883000 0x0 0x1000>; + clock-frequency = <0>; /* Filled by loader */ + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uart1:uart@0xfd884000 { + compatible = "ns16550a"; + reg = <0x0 0xfd884000 0x0 0x1000>; + clock-frequency = <0>; /* Filled by loader */ + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + /* Internal PCIe Controller */ + pcie-internal@0xfbc00000 { + compatible = "pci-host-ecam-generic"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + #interrupt-cells = <1>; + reg = <0x0 0xfbc00000 0x0 0x100000>; + interrupt-map-mask = <0xf800 0 0 7>; + /* Add legacy interrupts for SATA devices only */ + interrupt-map = <0x4000 0 0 1 &gic 0 43 4>, + <0x4800 0 0 1 &gic 0 44 4>; + + /* 32 bit non prefetchable memory space */ + ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>; + + bus-range = <0x00 0x00>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 6cc25ed912ee..c3255e0c90aa 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -195,6 +195,7 @@ &usb0 { status = "okay"; + dr_mode = "peripheral"; }; &usb1 { @@ -300,3 +301,11 @@ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; cd-inverted; }; + +&aes { + status = "okay"; +}; + +&sham { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 83d40f7655e5..6b8493720424 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -24,11 +24,3 @@ &mmc1 { vmmc-supply = <&ldo3_reg>; }; - -&sham { - status = "okay"; -}; - -&aes { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts new file mode 100644 index 000000000000..310da20a8aa7 --- /dev/null +++ b/arch/arm/boot/dts/am335x-chiliboard.dts @@ -0,0 +1,112 @@ +/* + * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/ + * Author: Rostislav Lisovy <lisovy@jablotron.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; +#include "am335x-chilisom.dtsi" + +/ { + model = "AM335x Chiliboard"; + compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom", + "ti,am33xx"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_gpio_pins>; + + led0 { + label = "led0"; + gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "heartbeat"; + }; + + led1 { + label = "led1"; + gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; +}; + +&am33xx_pinmux { + usb1_drvvbus: usb1_drvvbus { + pinctrl-single,pins = < + 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */ + >; + }; + + sd_pins: pinmux_sd_card { + pinctrl-single,pins = < + 0xf0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0xf4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0xf8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0xfc (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + led_gpio_pins: led_gpio_pins { + pinctrl-single,pins = < + 0x1e4 (PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */ + 0x1e8 (PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */ + >; + }; +}; + +&ldo4_reg { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; + +/* Ethernet */ +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; +}; + +&phy_sel { + rmii-clock-ext; +}; + +/* USB */ +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_drvvbus>; + + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +/* microSD */ +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&sd_pins>; + vmmc-supply = <&ldo4_reg>; + bus-width = <0x4>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi new file mode 100644 index 000000000000..7e9a34dffe21 --- /dev/null +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -0,0 +1,239 @@ +/* + * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/ + * Author: Rostislav Lisovy <lisovy@jablotron.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include "am33xx.dtsi" + +/ { + model = "Grinn AM335x ChiliSOM"; + compatible = "grinn,am335x-chilisom", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* mdio_data.mdio_data */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) + /* mdio_clk.mdio_clk */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + nandflash_pins: nandflash_pins { + pinctrl-single,pins = < + 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x90 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + +}; + +/include/ "tps65217.dtsi" + +&tps { + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3d"; + regulator-boot-on; + regulator-always-on; + }; + }; +}; + +/* Ethernet MAC */ +&mac { + slaves = <1>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +/* NAND Flash */ +&elm { + status = "okay"; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins>; + ranges = <0 0 0x08000000 0x01000000>; /* CS0 0 @addr 0x08000000, size 0x01000000 */ + nand@0,0 { + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + ti,nand-ecc-opt = "bch8"; + ti,elm-id = <&elm>; + nand-bus-width = <8>; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + }; +}; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index df5fee6b6b4b..87fc7a35e802 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -15,6 +15,7 @@ #include "am33xx.dtsi" #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "TI AM335x EVM-SK"; @@ -647,6 +648,16 @@ cap-power-off-card; pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */ + ref-clock-frequency = <38400000>; + }; }; &mcasp1 { diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts index 7266a00aab2e..5c5667a3624d 100644 --- a/arch/arm/boot/dts/am335x-lxm.dts +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -328,6 +328,10 @@ dual_emac_res_vlan = <3>; }; +&phy_sel { + rmii-clock-ext; +}; + &mac { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index a3466455b171..5ed4ca6eaf55 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -213,7 +213,9 @@ pinctrl-0 = <&i2c0_pins>; gpio@20 { - compatible = "mcp,mcp23017"; + compatible = "microchip,mcp23017"; + gpio-controller; + #gpio-cells = <2>; reg = <0x20>; }; @@ -222,7 +224,7 @@ }; eeprom@53 { - compatible = "mcp,24c02"; + compatible = "microchip,24c02"; reg = <0x53>; pagesize = <8>; }; @@ -297,8 +299,8 @@ | |-->0x004FFFFF-> Kernel end | |-->0x00500000-> File system start | | - | |-->0x014FFFFF-> File system end - | |-->0x01500000-> User data start + | |-->0x01FFFFFF-> File system end + | |-->0x02000000-> User data start | | | |-->0x03FFFFFF-> User data end | |-->0x04000000-> Data storage start @@ -327,12 +329,12 @@ partition@4 { label = "rootfs"; - reg = <0x00500000 0x01000000>; /* 16MB */ + reg = <0x00500000 0x01b00000>; /* 27MB */ }; partition@5 { label = "user"; - reg = <0x01500000 0x02b00000>; /* 43MB */ + reg = <0x02000000 0x02000000>; /* 32MB */ }; partition@6 { @@ -343,7 +345,7 @@ }; &mac { - dual_emac = <1>; + dual_emac; status = "okay"; }; @@ -353,11 +355,13 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; + phy-mode = "mii"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index 712edce7d6fb..afb4b3a7bab4 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -&scrm_clocks { +&scm_clocks { sys_clkin_ck: sys_clkin_ck { #clock-cells = <0>; compatible = "ti,mux-clock"; @@ -99,7 +99,7 @@ ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <0>; reg = <0x0664>; }; @@ -107,7 +107,7 @@ ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <1>; reg = <0x0664>; }; @@ -115,7 +115,7 @@ ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <2>; reg = <0x0664>; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index acd37057bca9..21fcc440fc1a 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -83,20 +83,6 @@ }; }; - am33xx_control_module: control_module@4a002000 { - compatible = "syscon"; - reg = <0x44e10000 0x7fc>; - }; - - am33xx_pinmux: pinmux@44e10800 { - compatible = "pinctrl-single"; - reg = <0x44e10800 0x0238>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x7f>; - }; - /* * XXX: Use a flat representation of the AM33XX interconnect. * The real AM33XX interconnect network is quite complex. Since @@ -111,37 +97,58 @@ ranges; ti,hwmods = "l3_main"; - prcm: prcm@44e00000 { - compatible = "ti,am3-prcm"; - reg = <0x44e00000 0x4000>; - - prcm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + l4_wkup: l4_wkup@44c00000 { + compatible = "ti,am3-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x44c00000 0x280000>; - prcm_clockdomains: clockdomains { - }; - }; + prcm: prcm@200000 { + compatible = "ti,am3-prcm"; + reg = <0x200000 0x4000>; - scrm: scrm@44e10000 { - compatible = "ti,am3-scrm"; - reg = <0x44e10000 0x2000>; + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; + prcm_clockdomains: clockdomains { + }; }; - scrm_clockdomains: clockdomains { + scm: scm@210000 { + compatible = "ti,am3-scm", "simple-bus"; + reg = <0x210000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x210000 0x2000>; + + am33xx_pinmux: pinmux@800 { + compatible = "pinctrl-single"; + reg = <0x800 0x238>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7f>; + }; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + scm_clockdomains: clockdomains { + }; }; }; - cm: syscon@44e10000 { - compatible = "ti,am33xx-controlmodule", "syscon"; - reg = <0x44e10000 0x800>; - }; - intc: interrupt-controller@48200000 { compatible = "ti,am33xx-intc"; interrupt-controller; @@ -350,7 +357,7 @@ reg = <0x481cc000 0x2000>; clocks = <&dcan0_fck>; clock-names = "fck"; - syscon-raminit = <&am33xx_control_module 0x644 0>; + syscon-raminit = <&scm_conf 0x644 0>; interrupts = <52>; status = "disabled"; }; @@ -361,7 +368,7 @@ reg = <0x481d0000 0x2000>; clocks = <&dcan1_fck>; clock-names = "fck"; - syscon-raminit = <&am33xx_control_module 0x644 1>; + syscon-raminit = <&scm_conf 0x644 1>; interrupts = <55>; status = "disabled"; }; @@ -720,7 +727,7 @@ */ interrupts = <40 41 42 43>; ranges; - syscon = <&cm>; + syscon = <&scm_conf>; status = "disabled"; davinci_mdio: mdio@4a101000 { diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index c90724bded10..f164dce08755 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -31,7 +31,7 @@ status = "disabled"; reg = <0x5c000000 0x30000>; interrupts = <67 68 69 70>; - syscon = <&omap3_scm_general>; + syscon = <&scm_conf>; ti,davinci-ctrl-reg-offset = <0x10000>; ti,davinci-ctrl-mod-reg-offset = <0>; ti,davinci-ctrl-ram-offset = <0x20000>; diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi index df489d310b50..518b8fde88b0 100644 --- a/arch/arm/boot/dts/am35xx-clocks.dtsi +++ b/arch/arm/boot/dts/am35xx-clocks.dtsi @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -&scrm_clocks { +&scm_clocks { emac_ick: emac_ick { #clock-cells = <0>; compatible = "ti,am35xx-gate-clock"; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 1943fc333e7c..c80a3e233792 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -15,7 +15,7 @@ / { compatible = "ti,am4372", "ti,am43"; - interrupt-parent = <&gic>; + interrupt-parent = <&wakeupgen>; aliases { @@ -48,6 +48,15 @@ #interrupt-cells = <3>; reg = <0x48241000 0x1000>, <0x48240100 0x0100>; + interrupt-parent = <&gic>; + }; + + wakeupgen: interrupt-controller@48281000 { + compatible = "ti,omap4-wugen-mpu"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48281000 0x1000>; + interrupt-parent = <&gic>; }; l2-cache-controller@48242000 { @@ -57,22 +66,6 @@ cache-level = <2>; }; - am43xx_control_module: control_module@4a002000 { - compatible = "syscon"; - reg = <0x44e10000 0x7f4>; - }; - - am43xx_pinmux: pinmux@44e10800 { - compatible = "ti,am437-padconf", "pinctrl-single"; - reg = <0x44e10800 0x31c>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0xffffffff>; - }; - ocp { compatible = "ti,am4372-l3-noc", "simple-bus"; #address-cells = <1>; @@ -84,29 +77,58 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - prcm: prcm@44df0000 { - compatible = "ti,am4-prcm"; - reg = <0x44df0000 0x11000>; + l4_wkup: l4_wkup@44c00000 { + compatible = "ti,am4-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x44c00000 0x287000>; - prcm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + prcm: prcm@1f0000 { + compatible = "ti,am4-prcm"; + reg = <0x1f0000 0x11000>; - prcm_clockdomains: clockdomains { - }; - }; - - scrm: scrm@44e10000 { - compatible = "ti,am4-scrm"; - reg = <0x44e10000 0x2000>; + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; + prcm_clockdomains: clockdomains { + }; }; - scrm_clockdomains: clockdomains { + scm: scm@210000 { + compatible = "ti,am4-scm", "simple-bus"; + reg = <0x210000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x210000 0x4000>; + + am43xx_pinmux: pinmux@800 { + compatible = "ti,am437-padconf", + "pinctrl-single"; + reg = <0x800 0x31c>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + scm_clockdomains: clockdomains { + }; }; }; @@ -787,7 +809,7 @@ }; ocp2scp0: ocp2scp@483a8000 { - compatible = "ti,omap-ocp2scp"; + compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -806,7 +828,7 @@ }; ocp2scp1: ocp2scp@483e8000 { - compatible = "ti,omap-ocp2scp"; + compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -884,7 +906,7 @@ }; hdq: hdq@48347000 { - compatible = "ti,am43xx-hdq"; + compatible = "ti,am4372-hdq"; reg = <0x48347000 0x1000>; interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; clocks = <&func_12m_clk>; @@ -933,7 +955,7 @@ clocks = <&dcan0_fck>; clock-names = "fck"; reg = <0x481cc000 0x2000>; - syscon-raminit = <&am43xx_control_module 0x644 0>; + syscon-raminit = <&scm_conf 0x644 0>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -944,7 +966,7 @@ clocks = <&dcan1_fck>; clock-names = "fck"; reg = <0x481d0000 0x2000>; - syscon-raminit = <&am43xx_control_module 0x644 1>; + syscon-raminit = <&scm_conf 0x644 1>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index f84d9715a4a9..26956cb50835 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -352,7 +352,6 @@ reg = <0x24>; compatible = "ti,tps65218"; interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */ - interrupt-parent = <&gic>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index f9a17e2ca8cb..378344271746 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -133,17 +133,17 @@ >; }; - i2c1_pins_default: i2c1_pins_default { + i2c2_pins_default: i2c2_pins_default { pinctrl-single,pins = < - 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ - 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ + 0x1e8 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */ + 0x1ec (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */ >; }; - i2c1_pins_sleep: i2c1_pins_sleep { + i2c2_pins_sleep: i2c2_pins_sleep { pinctrl-single,pins = < - 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_cs0.i2c1_scl */ - 0x158 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d1.i2c1_sda */ + 0x1e8 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1ec (PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; @@ -254,7 +254,7 @@ status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c0_pins_default>; - pinctrl-1 = <&i2c0_pins_default>; + pinctrl-1 = <&i2c0_pins_sleep>; clock-frequency = <400000>; at24@50 { @@ -262,17 +262,10 @@ pagesize = <64>; reg = <0x50>; }; -}; - -&i2c1 { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_pins_default>; - pinctrl-1 = <&i2c1_pins_default>; - clock-frequency = <400000>; tps: tps62362@60 { compatible = "ti,tps62362"; + reg = <0x60>; regulator-name = "VDD_MPU"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1330000>; @@ -284,6 +277,14 @@ }; }; +&i2c2 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_pins_default>; + pinctrl-1 = <&i2c2_pins_sleep>; + clock-frequency = <100000>; +}; + &epwmss0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 832d24318f62..8ae29c955c11 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -392,7 +392,6 @@ tps@24 { compatible = "ti,tps65218"; reg = <0x24>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 257c099c347e..795d68af6df9 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -69,7 +69,48 @@ }; }; - am43xx_pinmux: pinmux@44e10800 { + matrix_keypad: matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + debounce-delay-ms = <5>; + col-scan-delay-us = <2>; + + row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */ + &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */ + &gpio0 14 GPIO_ACTIVE_HIGH /* Bank0, pin14 */ + &gpio0 15 GPIO_ACTIVE_HIGH>; /* Bank0, pin15 */ + + col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH /* Bank3, pin9 */ + &gpio3 10 GPIO_ACTIVE_HIGH /* Bank3, pin10 */ + &gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */ + &gpio2 19 GPIO_ACTIVE_HIGH>; /* Bank2, pin19 */ + + linux,keymap = <0x00000201 /* P1 */ + 0x01000204 /* P4 */ + 0x02000207 /* P7 */ + 0x0300020a /* NUMERIC_STAR */ + 0x00010202 /* P2 */ + 0x01010205 /* P5 */ + 0x02010208 /* P8 */ + 0x03010200 /* P0 */ + 0x00020203 /* P3 */ + 0x01020206 /* P6 */ + 0x02020209 /* P9 */ + 0x0302020b /* NUMERIC_POUND */ + 0x00030067 /* UP */ + 0x0103006a /* RIGHT */ + 0x0203006c /* DOWN */ + 0x03030069>; /* LEFT */ + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; +}; + +&am43xx_pinmux { cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ @@ -279,47 +320,6 @@ 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) >; }; - }; - - matrix_keypad: matrix_keypad@0 { - compatible = "gpio-matrix-keypad"; - debounce-delay-ms = <5>; - col-scan-delay-us = <2>; - - row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */ - &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */ - &gpio0 14 GPIO_ACTIVE_HIGH /* Bank0, pin14 */ - &gpio0 15 GPIO_ACTIVE_HIGH>; /* Bank0, pin15 */ - - col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH /* Bank3, pin9 */ - &gpio3 10 GPIO_ACTIVE_HIGH /* Bank3, pin10 */ - &gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */ - &gpio2 19 GPIO_ACTIVE_HIGH>; /* Bank2, pin19 */ - - linux,keymap = <0x00000201 /* P1 */ - 0x01000204 /* P4 */ - 0x02000207 /* P7 */ - 0x0300020a /* NUMERIC_STAR */ - 0x00010202 /* P2 */ - 0x01010205 /* P5 */ - 0x02010208 /* P8 */ - 0x03010200 /* P0 */ - 0x00020203 /* P3 */ - 0x01020206 /* P6 */ - 0x02020209 /* P9 */ - 0x0302020b /* NUMERIC_POUND */ - 0x00030067 /* UP */ - 0x0103006a /* RIGHT */ - 0x0203006c /* DOWN */ - 0x03030069>; /* LEFT */ - }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 51 53 56 62 75 101 152 255>; - default-brightness-level = <8>; - }; }; &mmc1 { @@ -369,7 +369,6 @@ reg = <0x24>; compatible = "ti,tps65218"; interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */ - interrupt-parent = <&gic>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index c7dc9dab93a4..d0c0dfa4ec48 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -&scrm_clocks { +&scm_clocks { sys_clkin_ck: sys_clkin_ck { #clock-cells = <0>; compatible = "ti,mux-clock"; @@ -107,7 +107,7 @@ ehrpwm0_tbclk: ehrpwm0_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <0>; reg = <0x0664>; }; @@ -115,7 +115,7 @@ ehrpwm1_tbclk: ehrpwm1_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <1>; reg = <0x0664>; }; @@ -123,7 +123,7 @@ ehrpwm2_tbclk: ehrpwm2_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <2>; reg = <0x0664>; }; @@ -131,7 +131,7 @@ ehrpwm3_tbclk: ehrpwm3_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <4>; reg = <0x0664>; }; @@ -139,7 +139,7 @@ ehrpwm4_tbclk: ehrpwm4_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <5>; reg = <0x0664>; }; @@ -147,7 +147,7 @@ ehrpwm5_tbclk: ehrpwm5_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <6>; reg = <0x0664>; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 03750af3b49a..15f198e4864d 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -8,7 +8,6 @@ /dts-v1/; #include "dra74x.dtsi" -#include <dt-bindings/clk/ti-dra7-atl.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -87,6 +86,7 @@ gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = <0 0>, <13000 1>; + #cooling-cells = <2>; }; extcon_usb1: extcon_usb1 { @@ -442,6 +442,7 @@ pinctrl-0 = <&tmp102_pins_default>; interrupt-parent = <&gpio7>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; }; }; @@ -454,7 +455,6 @@ mcp_rtc: rtc@6f { compatible = "microchip,mcp7941x"; reg = <0x6f>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>; /* IRQ_SYS_1N */ pinctrl-names = "default"; @@ -477,7 +477,7 @@ &uart3 { status = "okay"; - interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, <&dra7_pmx_core 0x248>; pinctrl-names = "default"; @@ -560,3 +560,50 @@ &usb2 { dr_mode = "peripheral"; }; + +&cpu_trips { + cpu_alert1: cpu_alert1 { + temperature = <50000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; +}; + +&cpu_cooling_maps { + map1 { + trip = <&cpu_alert1>; + cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; +}; + +&thermal_zones { + board_thermal: board_thermal { + polling-delay-passive = <1250>; /* milliseconds */ + polling-delay = <1500>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&tmp102 0>; + + board_trips: trips { + board_alert0: board_alert { + temperature = <40000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + + board_crit: board_crit { + temperature = <105000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + board_cooling_maps: cooling-maps { + map0 { + trip = <&board_alert0>; + cooling-device = + <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index e993c46bd472..19f3bf271915 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -45,6 +45,15 @@ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. */ /dts-v1/; @@ -55,7 +64,7 @@ compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { @@ -64,7 +73,7 @@ }; soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; internal-regs { diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index b10ceb488efe..0f40d5da28c3 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -51,7 +51,7 @@ compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 3f8cc3845a5e..a31207860f34 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -53,7 +53,7 @@ compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 99eb8a014ac6..00540f292979 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -53,7 +53,7 @@ compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 6ae36a38beb2..19475e68b8e9 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -64,7 +64,7 @@ compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 59f74e66963f..b42b767763aa 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -67,8 +67,7 @@ "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 8a322ad57e5f..ec96f0b36346 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -59,8 +59,8 @@ compatible = "marvell,armada-370-xp"; aliases { - eth0 = ð0; - eth1 = ð1; + serial0 = &uart0; + serial1 = &uart1; }; cpus { @@ -73,6 +73,11 @@ }; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts-extended = <&mpic 3>; + }; + soc { #address-cells = <2>; #size-cells = <1>; @@ -223,7 +228,7 @@ <0x20250 0x8>; }; - mpic: interrupt-controller@20000 { + mpic: interrupt-controller@20a00 { compatible = "marvell,mpic"; #interrupt-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 27397f151def..00b50db57c9c 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -129,6 +129,7 @@ compatible = "marvell,aurora-outer-cache"; reg = <0x08000 0x1000>; cache-id-part = <0x100>; + cache-level = <2>; cache-unified; wt-override; }; @@ -232,7 +233,7 @@ reg = <0x18330 0x4>; }; - interrupt-controller@20000 { + interrupt-controller@20a00 { reg = <0x20a00 0x1d0>, <0x21870 0x58>; }; diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 0440891425c0..4eabc9c21f8d 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -55,7 +55,7 @@ compatible = "marvell,a375-db", "marvell,armada375"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index ba3c57e0af72..c675257f2377 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -60,8 +60,8 @@ gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; - ethernet0 = ð0; - ethernet1 = ð1; + serial0 = &uart0; + serial1 = &uart1; }; clocks { @@ -96,6 +96,11 @@ }; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts-extended = <&mpic 3>; + }; + soc { compatible = "marvell,armada375-mbus", "simple-bus"; #address-cells = <2>; @@ -276,7 +281,7 @@ status = "disabled"; }; - serial@12000 { + uart0: serial@12000 { compatible = "snps,dw-apb-uart"; reg = <0x12000 0x100>; reg-shift = <2>; @@ -286,7 +291,7 @@ status = "disabled"; }; - serial@12100 { + uart1: serial@12100 { compatible = "snps,dw-apb-uart"; reg = <0x12100 0x100>; reg-shift = <2>; @@ -394,7 +399,7 @@ reg = <0x20000 0x100>, <0x20180 0x20>; }; - mpic: interrupt-controller@20000 { + mpic: interrupt-controller@20a00 { compatible = "marvell,mpic"; reg = <0x20a00 0x2d0>, <0x21070 0x58>; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 57b9119fb3e0..7219ac3a3d90 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -49,8 +49,7 @@ compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x"; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &uart1; + stdout-path = "serial1:115200n8"; }; memory { @@ -126,6 +125,13 @@ status = "okay"; }; + pinctrl@18000 { + xhci0_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + }; + ethernet@30000 { status = "okay"; phy = <&phy2>; @@ -150,6 +156,24 @@ phy = <&phy0>; phy-mode = "rgmii-id"; }; + + nfc: flash@d0000 { + status = "okay"; + #address-cells = <1>; + #size-cells = <1>; + + num-cs = <1>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + }; + + usb3@f0000 { + status = "okay"; + usb-phy = <&usb3_phy>; + }; }; pcie-controller { @@ -175,4 +199,20 @@ }; }; }; + + usb3_phy: usb3_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_xhci0_vbus>; + }; + + reg_xhci0_vbus: xhci0-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&xhci0_vbus_pins>; + regulator-name = "xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; }; diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index 16512efcd32c..51d1623de53e 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -54,7 +54,7 @@ "marvell,armada385", "marvell,armada380"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { @@ -99,7 +99,7 @@ phy-mode = "rgmii-id"; }; - usb@50000 { + usb@58000 { status = "ok"; }; diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index 590b383db323..78514ab0b47a 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -48,8 +48,7 @@ compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380"; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; memory { @@ -135,7 +134,7 @@ }; /* CON4 */ - usb@50000 { + usb@58000 { vcc-supply = <®_usb2_0_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts index d99baac72081..1dc6e2341cc2 100644 --- a/arch/arm/boot/dts/armada-388-rd.dts +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -55,7 +55,7 @@ "marvell,armada385","marvell,armada380"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { @@ -85,6 +85,16 @@ clock-frequency = <100000>; }; + sdhci@d8000 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhci_pins>; + broken-cd; + no-1-8-v; + wp-inverted; + bus-width = <8>; + status = "okay"; + }; + serial@12000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 1dff30a81e24..ed2dd8ba4080 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -59,9 +59,13 @@ aliases { gpio0 = &gpio0; gpio1 = &gpio1; - ethernet0 = ð0; - ethernet1 = ð1; - ethernet2 = ð2; + serial0 = &uart0; + serial1 = &uart1; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts-extended = <&mpic 3>; }; soc { @@ -216,7 +220,7 @@ status = "disabled"; }; - serial@12100 { + uart1: serial@12100 { compatible = "snps,dw-apb-uart"; reg = <0x12100 0x100>; reg-shift = <2>; @@ -368,7 +372,7 @@ reg = <0x20000 0x100>, <0x20180 0x20>; }; - mpic: interrupt-controller@20000 { + mpic: interrupt-controller@20a00 { compatible = "marvell,mpic"; reg = <0x20a00 0x2d0>, <0x21070 0x58>; #interrupt-cells = <1>; @@ -435,7 +439,7 @@ status = "disabled"; }; - usb@50000 { + usb@58000 { compatible = "marvell,orion-ehci"; reg = <0x58000 0x500>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; @@ -548,8 +552,11 @@ sdhci@d8000 { compatible = "marvell,armada-380-sdhci"; - reg = <0xd8000 0x1000>, <0xdc000 0x100>; - interrupts = <0 25 0x4>; + reg-names = "sdhci", "mbus", "conf-sdio3"; + reg = <0xd8000 0x1000>, + <0xdc000 0x100>, + <0x18454 0x4>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gateclk 17>; mrvl,clk-delay-cycles = <0x1F>; status = "disabled"; diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi new file mode 100644 index 000000000000..094e39c66039 --- /dev/null +++ b/arch/arm/boot/dts/armada-390.dtsi @@ -0,0 +1,57 @@ +/* + * Device Tree Include file for Marvell Armada 390 SoC. + * + * Copyright (C) 2015 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armada-39x.dtsi" + +/ { + soc { + internal-regs { + pinctrl@18000 { + compatible = "marvell,mv88f6920-pinctrl"; + reg = <0x18000 0x20>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts new file mode 100644 index 000000000000..bbf83756c43c --- /dev/null +++ b/arch/arm/boot/dts/armada-398-db.dts @@ -0,0 +1,153 @@ +/* + * Device Tree Include file for Marvell Armada 398 Development Board + * + * Copyright (C) 2015 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-398.dtsi" + +/ { + model = "Marvell Armada 398 Development Board"; + compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2 GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + + internal-regs { + spi@10680 { + status = "okay"; + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "n25q128a13"; + reg = <0>; + spi-max-frequency = <108000000>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x400000>; + }; + + partition@400000 { + label = "Filesystem"; + reg = <0x400000 0x1000000>; + }; + }; + }; + + i2c@11000 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + clock-frequency = <100000>; + }; + + serial@12000 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + serial@12100 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + flash@d0000 { + status = "okay"; + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + + pcie@2,0 { + status = "okay"; + }; + + pcie@3,0 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/armada-398.dtsi new file mode 100644 index 000000000000..fdc25914e3a3 --- /dev/null +++ b/arch/arm/boot/dts/armada-398.dtsi @@ -0,0 +1,60 @@ +/* + * Device Tree Include file for Marvell Armada 398 SoC. + * + * Copyright (C) 2015 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armada-39x.dtsi" + +/ { + compatible = "marvell,armada398", "marvell,armada390"; + + soc { + internal-regs { + pinctrl@18000 { + compatible = "marvell,mv88f6928-pinctrl"; + reg = <0x18000 0x20>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi new file mode 100644 index 000000000000..0e85fc15ceda --- /dev/null +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -0,0 +1,508 @@ +/* + * Device Tree Include file for Marvell Armada 39x family of SoCs. + * + * Copyright (C) 2015 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) + +/ { + model = "Marvell Armada 39x family SoC"; + compatible = "marvell,armada390"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "marvell,armada-390-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + soc { + compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + controller = <&mbusc>; + interrupt-parent = <&gic>; + pcie-mem-aperture = <0xe0000000 0x8000000>; + pcie-io-aperture = <0xe8000000 0x100000>; + + bootrom { + compatible = "marvell,bootrom"; + reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>; + }; + + internal-regs { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + + L2: cache-controller@8000 { + compatible = "arm,pl310-cache"; + reg = <0x8000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + scu@c000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xc000 0x100>; + }; + + timer@c600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xc600 0x20>; + interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>; + clocks = <&coreclk 2>; + }; + + gic: interrupt-controller@d000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #size-cells = <0>; + interrupt-controller; + reg = <0xd000 0x1000>, + <0xc100 0x100>; + }; + + spi0: spi@10600 { + compatible = "marvell,orion-spi"; + reg = <0x10600 0x50>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + spi1: spi@10680 { + compatible = "marvell,orion-spi"; + reg = <0x10680 0x50>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + i2c0: i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + timeout-ms = <1000>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + i2c1: i2c@11100 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + timeout-ms = <1000>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + i2c2: i2c@11200 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11200 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + timeout-ms = <1000>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + i2c3: i2c@11300 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11300 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + timeout-ms = <1000>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + uart0: serial@12000 { + compatible = "snps,dw-apb-uart"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + uart1: serial@12100 { + compatible = "snps,dw-apb-uart"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + uart2: serial@12200 { + compatible = "snps,dw-apb-uart"; + reg = <0x12200 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + uart3: serial@12300 { + compatible = "snps,dw-apb-uart"; + reg = <0x12300 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + pinctrl@18000 { + i2c0_pins: i2c0-pins { + marvell,pins = "mpp2", "mpp3"; + marvell,function = "i2c0"; + }; + + uart0_pins: uart0-pins { + marvell,pins = "mpp0", "mpp1"; + marvell,function = "ua0"; + }; + + uart1_pins: uart1-pins { + marvell,pins = "mpp19", "mpp20"; + marvell,function = "ua1"; + }; + + spi1_pins: spi1-pins { + marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59"; + marvell,function = "spi1"; + }; + + nand_pins: nand-pins { + marvell,pins = "mpp22", "mpp34", "mpp23", "mpp33", + "mpp38", "mpp28", "mpp40", "mpp42", + "mpp35", "mpp36", "mpp25", "mpp30", + "mpp32"; + marvell,function = "dev"; + }; + }; + + system-controller@18200 { + compatible = "marvell,armada-390-system-controller", + "marvell,armada-370-xp-system-controller"; + reg = <0x18200 0x100>; + }; + + gateclk: clock-gating-control@18220 { + compatible = "marvell,armada-390-gating-clock"; + reg = <0x18220 0x4>; + clocks = <&coreclk 0>; + #clock-cells = <1>; + }; + + coreclk: mvebu-sar@18600 { + compatible = "marvell,armada-390-core-clock"; + reg = <0x18600 0x04>; + #clock-cells = <1>; + }; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>; + }; + + mpic: interrupt-controller@20a00 { + compatible = "marvell,mpic"; + reg = <0x20a00 0x2d0>, <0x21070 0x58>; + #interrupt-cells = <1>; + #size-cells = <1>; + interrupt-controller; + msi-controller; + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer@20300 { + compatible = "marvell,armada-380-timer", + "marvell,armada-xp-timer"; + reg = <0x20300 0x30>, <0x21040 0x30>; + interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <&mpic 5>, + <&mpic 6>; + clocks = <&coreclk 2>, <&coreclk 5>; + clock-names = "nbclk", "fixed"; + }; + + cpurst@20800 { + compatible = "marvell,armada-370-cpu-reset"; + reg = <0x20800 0x10>; + }; + + pmsu@22000 { + compatible = "marvell,armada-390-pmsu", + "marvell,armada-380-pmsu"; + reg = <0x22000 0x1000>; + }; + + xor@60800 { + compatible = "marvell,orion-xor"; + reg = <0x60800 0x100 + 0x60a00 0x100>; + clocks = <&gateclk 22>; + status = "okay"; + + xor00 { + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; + + xor@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + clocks = <&gateclk 28>; + status = "okay"; + + xor10 { + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + dmacap,memcpy; + dmacap,xor; + }; + xor11 { + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; + + flash@d0000 { + compatible = "marvell,armada370-nand"; + reg = <0xd0000 0x54>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coredivclk 0>; + status = "disabled"; + }; + + sdhci@d8000 { + compatible = "marvell,armada-380-sdhci"; + reg = <0xd8000 0x1000>, <0xdc000 0x100>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 17>; + mrvl,clk-delay-cycles = <0x1F>; + status = "disabled"; + }; + + coredivclk: clock@e4250 { + compatible = "marvell,armada-390-corediv-clock", + "marvell,armada-380-corediv-clock"; + reg = <0xe4250 0xc>; + #clock-cells = <1>; + clocks = <&mainpll>; + clock-output-names = "nand"; + }; + }; + + pcie-controller { + compatible = "marvell,armada-370-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + msi-parent = <&mpic>; + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 + 0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 + 0x82000000 0x1 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO */ + 0x82000000 0x3 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */ + 0x81000000 0x3 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO */ + 0x82000000 0x4 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */ + 0x81000000 0x4 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO */>; + + /* + * This port can be either x4 or x1. When + * configured in x4 by the bootloader, then + * pcie@4,0 is not available. + */ + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + /* x1 port */ + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + /* x1 port */ + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 + 0x81000000 0 0 0x81000000 0x3 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + /* + * x1 port only available when pcie@1,0 is + * configured as a x1 port + */ + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 + 0x81000000 0 0 0x81000000 0x4 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + }; + }; + + clocks { + /* 2 GHz fixed main PLL */ + mainpll: mainpll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <2000000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index c1fbab243609..dfd782b44e50 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -59,7 +59,7 @@ compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 48bdafe17526..103782407618 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -64,7 +64,7 @@ compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 206aebba01be..565227eacf06 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -65,7 +65,7 @@ compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 5fb3c8b687cf..06a6a6c1fdf7 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -54,8 +54,7 @@ "marvell,armadaxp", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts new file mode 100644 index 000000000000..a2cf2154dcdb --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -0,0 +1,393 @@ +/* + * Device Tree file for the Linksys WRT1900AC (Mamba). + * + * Note: this board is shipped with a new generation boot loader that + * remaps internal registers at 0xf1000000. Therefore, if earlyprintk + * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option should be + * used. + * + * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org> + * + * Based on armada-xp-axpwifiap.dts: + * + * Copyright (C) 2013 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-xp-mv78230.dtsi" + +/ { + model = "Linksys WRT1900AC"; + compatible = "linksys,mamba", "marvell,armadaxp-mv78230", + "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* Etron EJ168 USB 3.0 controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* First mini-PCIe port */ + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + + /* Second mini-PCIe port */ + pcie@3,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; + }; + + internal-regs { + + /* J10: VCC, NC, RX, NC, TX, GND */ + serial@12000 { + status = "okay"; + }; + + sata@a0000 { + nr-ports = <1>; + status = "okay"; + }; + + ethernet@70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + /* USB part of the eSATA/USB 2.0 port */ + usb@50000 { + status = "okay"; + }; + + i2c@11000 { + status = "okay"; + clock-frequency = <100000>; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + + tlc59116@68 { + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <2>; + compatible = "ti,tlc59116"; + reg = <0x68>; + + wan_amber@0 { + label = "mamba:amber:wan"; + reg = <0x0>; + }; + + wan_white@1 { + label = "mamba:white:wan"; + reg = <0x1>; + }; + + wlan_2g@2 { + label = "mamba:white:wlan_2g"; + reg = <0x2>; + }; + + wlan_5g@3 { + label = "mamba:white:wlan_5g"; + reg = <0x3>; + }; + + esata@4 { + label = "mamba:white:esata"; + reg = <0x4>; + }; + + usb2@5 { + label = "mamba:white:usb2"; + reg = <0x5>; + }; + + usb3_1@6 { + label = "mamba:white:usb3_1"; + reg = <0x6>; + }; + + usb3_2@7 { + label = "mamba:white:usb3_2"; + reg = <0x7>; + }; + + wps_white@8 { + label = "mamba:white:wps"; + reg = <0x8>; + }; + + wps_amber@9 { + label = "mamba:amber:wps"; + reg = <0x9>; + }; + }; + }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; /* 1MB */ + read-only; + }; + + partition@100000 { + label = "u_env"; + reg = <0x100000 0x40000>; /* 256KB */ + }; + + partition@140000 { + label = "s_env"; + reg = <0x140000 0x40000>; /* 256KB */ + }; + + partition@900000 { + label = "devinfo"; + reg = <0x900000 0x100000>; /* 1MB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x2800000>; /* 40MB */ + }; + + partition@d00000 { + label = "rootfs1"; + reg = <0xd00000 0x2500000>; /* 37MB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@3200000 { + label = "kernel2"; + reg = <0x3200000 0x2800000>; /* 40MB */ + }; + + partition@3500000 { + label = "rootfs2"; + reg = <0x3500000 0x2500000>; /* 37MB */ + }; + + /* + * 38MB, last MB is for the BBT, not writable + */ + partition@5a00000 { + label = "syscfg"; + reg = <0x5a00000 0x2600000>; + }; + + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x180000 0x780000>; /* 7.5MB */ + }; + }; + + spi0: spi@10600 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "everspin,mr25h256"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <40000000>; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&keys_pin>; + pinctrl-names = "default"; + + button@1 { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + }; + + button@2 { + label = "Factory Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&power_led_pin>; + pinctrl-names = "default"; + + power { + label = "mamba:white:power"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + gpio_fan { + /* SUNON HA4010V4-0000-C99 */ + compatible = "gpio-fan"; + gpios = <&gpio0 24 0>; + + gpio-fan,speed-map = <0 0 + 4500 1>; + }; + + dsa@0 { + compatible = "marvell,dsa"; + #address-cells = <2>; + #size-cells = <0>; + + dsa,ethernet = <ð0>; + dsa,mii-bus = <&mdio>; + + switch@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */ + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "internet"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + }; + }; + }; +}; + +&pinctrl { + + keys_pin: keys-pin { + marvell,pins = "mpp32", "mpp33"; + marvell,function = "gpio"; + }; + + power_led_pin: power-led-pin { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + gpio_fan_pin: gpio-fan-pin { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index 56f958eb1ede..f894bc83e957 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -52,7 +52,7 @@ compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 4a7cbed79b07..8479fdc9e9c2 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -57,7 +57,6 @@ gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; - eth3 = ð3; }; cpus { diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 36ce63a96cc9..661d54c81580 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -57,7 +57,6 @@ gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; - eth3 = ð3; }; diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index 99cb9a8401b4..1516fc2627f9 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -53,7 +53,7 @@ compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 0c76d9f05fd0..e3b08fb959e5 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -54,7 +54,7 @@ compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index e9fb225169aa..6063428fa6a0 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -67,8 +67,7 @@ "marvell,armadaxp", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 82917236a2fb..013d63f69e36 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -57,7 +57,8 @@ compatible = "marvell,armadaxp", "marvell,armada-370-xp"; aliases { - eth2 = ð2; + serial2 = &uart2; + serial3 = &uart3; }; soc { @@ -78,6 +79,7 @@ compatible = "marvell,aurora-system-cache"; reg = <0x08000 0x1000>; cache-id-part = <0x100>; + cache-level = <2>; cache-unified; wt-override; }; @@ -149,11 +151,11 @@ cpuclk: clock-complex@18700 { #clock-cells = <1>; compatible = "marvell,armada-xp-cpu-clock"; - reg = <0x18700 0xA0>, <0x1c054 0x10>; + reg = <0x18700 0x24>, <0x1c054 0x10>; clocks = <&coreclk 1>; }; - interrupt-controller@20000 { + interrupt-controller@20a00 { reg = <0x20a00 0x2d0>, <0x21070 0x58>; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index fec1fca2ad66..9991240b7438 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -167,7 +167,13 @@ macb1: ethernet@f802c000 { phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + }; }; dbgu: serial@ffffee00 { @@ -188,6 +194,11 @@ <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; }; + pinctrl_key_gpio: key_gpio_0 { + atmel,pins = + <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + pinctrl_mmc0_cd: mmc0_cd { atmel,pins = <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; @@ -276,6 +287,9 @@ gpio_keys { compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio>; + bp3 { label = "PB_USER"; gpios = <&pioE 29 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts new file mode 100644 index 000000000000..c740e1a2a3a5 --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -0,0 +1,241 @@ +/* + * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board + * + * Copyright (C) 2015 Atmel, + * 2015 Josh Wu <josh.wu@atmel.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "sama5d4.dtsi" + +/ { + model = "Atmel SAMA5D4 Xplained"; + compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5"; + + chosen { + bootargs = "console=ttyS0,115200 ignore_loglevel earlyprintk"; + }; + + memory { + reg = <0x20000000 0x20000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + spi0: spi@f8010000 { + cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; + status = "okay"; + m25p80@0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; + + i2c0: i2c@f8014000 { + status = "okay"; + }; + + macb0: ethernet@f8020000 { + phy-mode = "rmii"; + status = "okay"; + + phy0: ethernet-phy@1 { + interrupt-parent = <&pioE>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + reg = <1>; + }; + }; + + mmc1: mmc@fc000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 3 0>; + }; + }; + + usart3: serial@fc00c000 { + status = "okay"; + }; + + usart4: serial@fc010000 { + status = "okay"; + }; + + adc0: adc@fc034000 { + atmel,adc-vref = <3300>; + status = "okay"; + }; + + watchdog@fc068640 { + status = "okay"; + }; + + pinctrl@fc06a000 { + board { + pinctrl_mmc1_cd: mmc1_cd { + atmel,pins = + <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + pinctrl_key_gpio: key_gpio_0 { + atmel,pins = + <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + }; + }; + }; + + usb0: gadget@00400000 { + atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + + usb1: ohci@00500000 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioE 11 GPIO_ACTIVE_HIGH + &pioE 14 GPIO_ACTIVE_HIGH + >; + status = "okay"; + }; + + usb2: ehci@00600000 { + status = "okay"; + }; + + nand0: nand@80000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + atmel,has-pmecc; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio>; + + pb_user1 { + label = "pb_user1"; + gpios = <&pioE 8 GPIO_ACTIVE_HIGH>; + linux,code = <0x100>; + gpio-key,wakeup; + }; + }; + + leds { + compatible = "gpio-leds"; + status = "okay"; + + d8 { + label = "d8"; + gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + d10 { + label = "d10"; + gpios = <&pioE 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 9198b719d0ef..89ef4a540db5 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -115,6 +115,10 @@ }; }; + ssc0: ssc@f8008000 { + status = "okay"; + }; + spi0: spi@f8010000 { cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; status = "okay"; @@ -127,6 +131,13 @@ i2c0: i2c@f8014000 { status = "okay"; + + wm8904: codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&pck2>; + clock-names = "mclk"; + }; }; macb0: ethernet@f8020000 { @@ -171,6 +182,10 @@ atmel,pins = <AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; }; + pinctrl_pck2_as_audio_mck: pck2_as_audio_mck { + atmel,pins = + <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; pinctrl_usba_vbus: usba_vbus { atmel,pins = <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; @@ -244,8 +259,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio>; @@ -257,4 +270,42 @@ gpio-key,wakeup; }; }; + + leds { + compatible = "gpio-leds"; + status = "okay"; + + d8 { + label = "d8"; + /* PE28, conflicts with usart4 rts pin */ + gpios = <&pioE 28 GPIO_ACTIVE_LOW>; + }; + + d9 { + label = "d9"; + gpios = <&pioE 9 GPIO_ACTIVE_HIGH>; + }; + + d10 { + label = "d10"; + gpios = <&pioE 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck2_as_audio_mck>; + + atmel,model = "wm8904 @ SAMA5D4EK"; + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN1L", "Line In Jack", + "IN1R", "Line In Jack"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + }; }; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 21c2b504f977..4fb333bd1f85 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -356,9 +356,13 @@ }; st: timer@fffffd00 { - compatible = "atmel,at91rm9200-st"; + compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd"; reg = <0xfffffd00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + + watchdog { + compatible = "atmel,at91rm9200-wdt"; + }; }; rtc: rtc@fffffe00 { @@ -830,7 +834,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91rm9200-usart"; + compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index fff0ee69aab4..d88fe62a2b2e 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -494,12 +494,12 @@ pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */ + <AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */ + <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; }; @@ -753,7 +753,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; @@ -842,7 +842,7 @@ }; macb0: ethernet@fffc4000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; + compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; @@ -853,7 +853,7 @@ }; usb1: gadget@fffa4000 { - compatible = "atmel,at91rm9200-udc"; + compatible = "atmel,at91sam9260-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&udc_clk>, <&udpck>; @@ -976,7 +976,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index e247b0b5fdab..bf8d1856a55a 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -124,11 +124,12 @@ }; usb1: gadget@fffa4000 { - compatible = "atmel,at91rm9200-udc"; + compatible = "atmel,at91sam9261-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&udc_clk>, <&udpck>; - clock-names = "usb_clk", "udc_clk", "udpck"; + clocks = <&udc_clk>, <&udpck>; + clock-names = "pclk", "hclk"; + atmel,matrix = <&matrix>; status = "disabled"; }; @@ -262,7 +263,7 @@ }; matrix: matrix@ffffee00 { - compatible = "atmel,at91sam9260-bus-matrix"; + compatible = "atmel,at91sam9260-bus-matrix", "syscon"; reg = <0xffffee00 0x200>; }; @@ -275,7 +276,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 1f67bb4c144e..111889b556cf 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -69,7 +69,7 @@ sram1: sram@00500000 { compatible = "mmio-sram"; - reg = <0x00300000 0x4000>; + reg = <0x00500000 0x4000>; }; ahb { @@ -762,7 +762,7 @@ }; dbgu: serial@ffffee00 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; @@ -845,7 +845,7 @@ }; macb0: ethernet@fffbc000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; + compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; @@ -856,7 +856,7 @@ }; usb1: gadget@fff78000 { - compatible = "atmel,at91rm9200-udc"; + compatible = "atmel,at91sam9263-udc"; reg = <0xfff78000 0x4000>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&udc_clk>, <&udpck>; @@ -905,7 +905,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi index 17b879990914..a7da0dd0c98f 100644 --- a/arch/arm/boot/dts/at91sam9g25.dtsi +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -7,6 +7,7 @@ */ #include "at91sam9x5.dtsi" +#include "at91sam9x5_isi.dtsi" #include "at91sam9x5_usart3.dtsi" #include "at91sam9x5_macb0.dtsi" diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 1e4c49c584d3..707fd4ea58f5 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -16,10 +16,28 @@ ahb { apb { + spi0: spi@f0000000 { + status = "disabled"; + }; + + mmc1: mmc@f000c000 { + status = "disabled"; + }; + + i2c0: i2c@f8010000 { + ov2640: camera@0x30 { + status = "okay"; + }; + }; + macb0: ethernet@f802c000 { phy-mode = "rmii"; status = "okay"; }; + + isi: isi@f8048000 { + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index ee80aa9c0759..70e59c5ceb2f 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -893,7 +893,7 @@ }; dbgu: serial@ffffee00 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; @@ -956,7 +956,7 @@ }; macb0: ethernet@fffbc000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; + compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; @@ -1116,7 +1116,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; @@ -1301,7 +1300,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index c2666a7cb5b1..a9e35dfc12d9 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -757,7 +757,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; @@ -894,7 +894,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; @@ -913,6 +912,15 @@ clocks = <&pwm_clk>; status = "disabled"; }; + + usb1: gadget@f803c000 { + compatible = "atmel,at91sam9260-udc"; + reg = <0xf803c000 0x4000>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&udphs_clk>, <&udpck>; + clock-names = "pclk", "hclk"; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 9575c0d895c9..6e067c8a3502 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -108,6 +108,13 @@ <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; }; + + usb1 { + pinctrl_usb1_vbus_sense: usb1_vbus_sense { + atmel,pins = + <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB16 gpio usb vbus sense, no pull up and deglitch */ + }; + }; }; spi0: spi@f0000000 { @@ -120,9 +127,20 @@ }; }; + usb1: gadget@f803c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus_sense>; + atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + watchdog@fffffe40 { status = "okay"; }; + + rtc@fffffeb0 { + status = "okay"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 40f645b8fe25..ebfd5ce9cb38 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -377,7 +377,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 818dabdd8c0e..3aa56ae3410a 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -860,7 +860,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; @@ -1066,7 +1066,7 @@ reg = <0x00500000 0x80000 0xf803c000 0x400>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&usb>, <&udphs_clk>; + clocks = <&utmi>, <&udphs_clk>; clock-names = "hclk", "pclk"; status = "disabled"; @@ -1130,7 +1130,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; @@ -1186,7 +1185,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi index 98bc877a68ef..8fc45ca4dcb5 100644 --- a/arch/arm/boot/dts/at91sam9x5_isi.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi @@ -13,6 +13,37 @@ / { ahb { apb { + pinctrl@fffff400 { + isi { + pinctrl_isi_data_0_7: isi-0-data-0-7 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D0, conflicts with LCDDAT0 */ + AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D1, conflicts with LCDDAT1 */ + AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D2, conflicts with LCDDAT2 */ + AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D3, conflicts with LCDDAT3 */ + AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D4, conflicts with LCDDAT4 */ + AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D5, conflicts with LCDDAT5 */ + AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D6, conflicts with LCDDAT6 */ + AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D7, conflicts with LCDDAT7 */ + AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_PCK, conflicts with LCDDAT12 */ + AT91_PIOC 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_HSYNC, conflicts with LCDDAT14 */ + AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* ISI_VSYNC, conflicts with LCDDAT13 */ + }; + + pinctrl_isi_data_8_9: isi-0-data-8-9 { + atmel,pins = + <AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D8, conflicts with LCDDAT8 */ + AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* ISI_D9, conflicts with LCDDAT9 */ + }; + + pinctrl_isi_data_10_11: isi-0-data-10-11 { + atmel,pins = + <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D10, conflicts with LCDDAT10 */ + AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* ISI_D11, conflicts with LCDDAT11 */ + }; + }; + }; + pmc: pmc@fffffc00 { periphck { isi_clk: isi_clk { @@ -21,6 +52,21 @@ }; }; }; + + isi: isi@f8048000 { + compatible = "atmel,at91sam9g45-isi"; + reg = <0xf8048000 0x4000>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isi_data_0_7>; + clocks = <&isi_clk>; + clock-names = "isi_clk"; + status = "disabled"; + port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi index 57e89d1d0325..73d7e30965ba 100644 --- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi @@ -53,7 +53,7 @@ }; macb0: ethernet@f802c000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; + compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi index 663676c02861..d81980c40c7d 100644 --- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi @@ -41,7 +41,7 @@ }; macb1: ethernet@f8030000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; + compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf8030000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 229d6c24a9c4..26112ebd15fc 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -42,6 +42,10 @@ }; }; }; + + rtc@fffffeb0 { + status = "okay"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index bd16bd360272..cc83a37a7311 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -59,6 +59,16 @@ status = "okay"; }; + isi: isi@f8048000 { + status = "disabled"; + port { + isi_0: endpoint@0 { + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + }; + }; + }; + i2c0: i2c@f8010000 { status = "okay"; @@ -66,9 +76,47 @@ compatible = "wm8731"; reg = <0x1a>; }; + + ov2640: camera@0x30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>; + clocks = <&pck0>; + clock-names = "xvclk"; + assigned-clocks = <&pck0>; + assigned-clock-rates = <25000000>; + status = "disabled"; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; + }; + }; + }; }; pinctrl@fffff400 { + camera_sensor { + pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 { + atmel,pins = + <AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_MCK */ + }; + + pinctrl_sensor_power: sensor_power-0 { + atmel,pins = + <AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_sensor_reset: sensor_reset-0 { + atmel,pins = + <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; + mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index ff5fb6ab0b97..7b52c33ea69a 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -54,6 +54,42 @@ /include/ "bcm-cygnus-clock.dtsi" + pinctrl: pinctrl@0x0301d0c8 { + compatible = "brcm,cygnus-pinmux"; + reg = <0x0301d0c8 0x30>, + <0x0301d24c 0x2c>; + }; + + gpio_crmu: gpio@03024800 { + compatible = "brcm,cygnus-crmu-gpio"; + reg = <0x03024800 0x50>, + <0x03024008 0x18>; + #gpio-cells = <2>; + gpio-controller; + }; + + gpio_ccm: gpio@1800a000 { + compatible = "brcm,cygnus-ccm-gpio"; + reg = <0x1800a000 0x50>, + <0x0301d164 0x20>; + #gpio-cells = <2>; + gpio-controller; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + }; + + gpio_asiu: gpio@180a5000 { + compatible = "brcm,cygnus-asiu-gpio"; + reg = <0x180a5000 0x668>; + #gpio-cells = <2>; + gpio-controller; + + pinmux = <&pinctrl>; + + interrupt-controller; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + }; + amba { #address-cells = <1>; #size-cells = <1>; @@ -90,6 +126,48 @@ status = "disabled"; }; + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x28000000 0 0x00010000 + 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; + + status = "disabled"; + }; + + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x48000000 0 0x00010000 + 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; + + status = "disabled"; + }; + uart0: serial@18020000 { compatible = "snps,dw-apb-uart"; reg = <0x18020000 0x100>; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index f18c9d9b2f2c..2ed9e5794785 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -45,13 +45,13 @@ power0 { label = "bcm53xx:green:power"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-off"; + linux,default-trigger = "default-on"; }; power1 { label = "bcm53xx:amber:power"; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; + linux,default-trigger = "default-off"; }; usb { diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts new file mode 100644 index 000000000000..ea26dd3ec03a --- /dev/null +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -0,0 +1,77 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Netgear R8000 + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" + +/ { + compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708"; + model = "Netgear R8000 (BCM4709)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + power0 { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + power1 { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 5ghz-1 { + label = "bcm53xx:white:5ghz-1"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi index 0ca0f4e523d0..39ac7840d7ee 100644 --- a/arch/arm/boot/dts/bcm7445.dtsi +++ b/arch/arm/boot/dts/bcm7445.dtsi @@ -76,7 +76,7 @@ reg-shift = <2>; reg-io-width = <4>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <0x4d3f640>; + clock-frequency = <81000000>; }; sun_top_ctrl: syscon@404000 { @@ -96,6 +96,18 @@ "syscon"; reg = <0x452000 0x100>; }; + + irq0_intc: interrupt-controller@40a780 { + compatible = "brcm,bcm7120-l2-intc"; + interrupt-parent = <&gic>; + #interrupt-cells = <1>; + reg = <0x40a780 0x8>; + interrupt-controller; + interrupts = <GIC_SPI 0x45 0x0>, + <GIC_SPI 0x43 0x0>; + brcm,int-map-mask = <0x25c>, <0x7000000>; + brcm,int-fwd-mask = <0x70000>; + }; }; smpboot { diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts index d2ee95280548..7db484323fd6 100644 --- a/arch/arm/boot/dts/bcm911360_entphn.dts +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -33,6 +33,7 @@ /dts-v1/; #include "bcm-cygnus.dtsi" +#include "dt-bindings/input/input.h" / { model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)"; @@ -50,4 +51,16 @@ uart3: serial@18023000 { status = "okay"; }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + hook { + label = "HOOK"; + linux,code = <KEY_O>; + gpios = <&gpio_asiu 48 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts index f1bb36f3975c..c9eb8565eac5 100644 --- a/arch/arm/boot/dts/bcm958300k.dts +++ b/arch/arm/boot/dts/bcm958300k.dts @@ -47,6 +47,14 @@ bootargs = "console=ttyS0,115200"; }; + pcie0: pcie@18012000 { + status = "okay"; + }; + + pcie1: pcie@18013000 { + status = "okay"; + }; + uart3: serial@18023000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts new file mode 100644 index 000000000000..56b429abbedb --- /dev/null +++ b/arch/arm/boot/dts/bcm958305k.dts @@ -0,0 +1,53 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-cygnus.dtsi" + +/ { + model = "Cygnus Wireless Audio (BCM958305K)"; + compatible = "brcm,bcm58305", "brcm,cygnus"; + + aliases { + serial0 = &uart3; + }; + + chosen { + stdout-path = &uart3; + bootargs = "console=ttyS0,115200"; + }; + + uart3: serial@18023000 { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 857d0289ad4d..169a85578fc9 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -29,10 +29,36 @@ &dm816x_pinmux { mcspi1_pins: pinmux_mcspi1_pins { pinctrl-single,pins = < - DM816X_IOPAD(0x0a94, PIN_INPUT | MUX_MODE0) /* SPI_SCLK */ - DM816X_IOPAD(0x0a98, PIN_OUTPUT | MUX_MODE0) /* SPI_SCS0 */ - DM816X_IOPAD(0x0aa8, PIN_INPUT | MUX_MODE0) /* SPI_D0 */ - DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0) /* SPI_D1 */ + DM816X_IOPAD(0x0a94, MUX_MODE0) /* SPI_SCLK */ + DM816X_IOPAD(0x0a98, MUX_MODE0) /* SPI_SCS0 */ + DM816X_IOPAD(0x0aa8, MUX_MODE0) /* SPI_D0 */ + DM816X_IOPAD(0x0aac, MUX_MODE0) /* SPI_D1 */ + >; + }; + + mmc_pins: pinmux_mmc_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0a70, MUX_MODE0) /* SD_POW */ + DM816X_IOPAD(0x0a74, MUX_MODE0) /* SD_CLK */ + DM816X_IOPAD(0x0a78, MUX_MODE0) /* SD_CMD */ + DM816X_IOPAD(0x0a7C, MUX_MODE0) /* SD_DAT0 */ + DM816X_IOPAD(0x0a80, MUX_MODE0) /* SD_DAT1 */ + DM816X_IOPAD(0x0a84, MUX_MODE0) /* SD_DAT2 */ + DM816X_IOPAD(0x0a88, MUX_MODE0) /* SD_DAT2 */ + DM816X_IOPAD(0x0a8c, MUX_MODE2) /* GP1[7] */ + DM816X_IOPAD(0x0a90, MUX_MODE2) /* GP1[8] */ + >; + }; + + usb0_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB0_DRVVBUS */ + >; + }; + + usb1_pins: pinmux_usb1_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0d08, MUX_MODE0) /* USB1_DRVVBUS */ >; }; }; @@ -125,5 +151,23 @@ }; &mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; + cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; +}; + +/* At least dm8168-evm rev c won't support multipoint, later may */ +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + mentor,multipoint = <0>; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; + mentor,multipoint = <0>; }; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index d98d0f7de380..de8427be830a 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -97,10 +97,31 @@ /* Device Configuration Registers */ scm_conf: syscon@600 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x600 0x110>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0x600 0x110>; + + usb_phy0: usb-phy@20 { + compatible = "ti,dm8168-usb-phy"; + reg = <0x20 0x8>; + reg-names = "phy"; + clocks = <&main_fapll 6>; + clock-names = "refclk"; + #phy-cells = <0>; + syscon = <&scm_conf>; + }; + + usb_phy1: usb-phy@28 { + compatible = "ti,dm8168-usb-phy"; + reg = <0x28 0x8>; + reg-names = "phy"; + clocks = <&main_fapll 6>; + clock-names = "refclk"; + #phy-cells = <0>; + syscon = <&scm_conf>; + }; }; scrm_clocks: clocks { @@ -129,17 +150,27 @@ }; gpio1: gpio@48032000 { - compatible = "ti,omap3-gpio"; + compatible = "ti,omap4-gpio"; ti,hwmods = "gpio1"; + ti,gpio-always-on; reg = <0x48032000 0x1000>; - interrupts = <97>; + interrupts = <96>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; }; gpio2: gpio@4804c000 { - compatible = "ti,omap3-gpio"; + compatible = "ti,omap4-gpio"; ti,hwmods = "gpio2"; + ti,gpio-always-on; reg = <0x4804c000 0x1000>; - interrupts = <99>; + interrupts = <98>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; }; gpmc: gpmc@50000000 { @@ -357,26 +388,91 @@ reg-names = "mc", "control"; interrupts = <18>; interrupt-names = "mc"; - dr_mode = "otg"; + dr_mode = "host"; + interface-type = <0>; + phys = <&usb_phy0>; + phy-names = "usb2-phy"; mentor,multipoint = <1>; mentor,num-eps = <16>; mentor,ram-bits = <12>; mentor,power = <500>; + + dmas = <&cppi41dma 0 0 &cppi41dma 1 0 + &cppi41dma 2 0 &cppi41dma 3 0 + &cppi41dma 4 0 &cppi41dma 5 0 + &cppi41dma 6 0 &cppi41dma 7 0 + &cppi41dma 8 0 &cppi41dma 9 0 + &cppi41dma 10 0 &cppi41dma 11 0 + &cppi41dma 12 0 &cppi41dma 13 0 + &cppi41dma 14 0 &cppi41dma 0 1 + &cppi41dma 1 1 &cppi41dma 2 1 + &cppi41dma 3 1 &cppi41dma 4 1 + &cppi41dma 5 1 &cppi41dma 6 1 + &cppi41dma 7 1 &cppi41dma 8 1 + &cppi41dma 9 1 &cppi41dma 10 1 + &cppi41dma 11 1 &cppi41dma 12 1 + &cppi41dma 13 1 &cppi41dma 14 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", + "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", + "rx14", "rx15", + "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", + "tx14", "tx15"; }; usb1: usb@47401800 { compatible = "ti,musb-am33xx"; - status = "disabled"; reg = <0x47401c00 0x400 0x47401800 0x200>; reg-names = "mc", "control"; interrupts = <19>; interrupt-names = "mc"; - dr_mode = "otg"; + dr_mode = "host"; + interface-type = <0>; + phys = <&usb_phy1>; + phy-names = "usb2-phy"; mentor,multipoint = <1>; mentor,num-eps = <16>; mentor,ram-bits = <12>; mentor,power = <500>; + + dmas = <&cppi41dma 15 0 &cppi41dma 16 0 + &cppi41dma 17 0 &cppi41dma 18 0 + &cppi41dma 19 0 &cppi41dma 20 0 + &cppi41dma 21 0 &cppi41dma 22 0 + &cppi41dma 23 0 &cppi41dma 24 0 + &cppi41dma 25 0 &cppi41dma 26 0 + &cppi41dma 27 0 &cppi41dma 28 0 + &cppi41dma 29 0 &cppi41dma 15 1 + &cppi41dma 16 1 &cppi41dma 17 1 + &cppi41dma 18 1 &cppi41dma 19 1 + &cppi41dma 20 1 &cppi41dma 21 1 + &cppi41dma 22 1 &cppi41dma 23 1 + &cppi41dma 24 1 &cppi41dma 25 1 + &cppi41dma 26 1 &cppi41dma 27 1 + &cppi41dma 28 1 &cppi41dma 29 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", + "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", + "rx14", "rx15", + "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", + "tx14", "tx15"; + }; + + cppi41dma: dma-controller@47402000 { + compatible = "ti,am3359-cppi41"; + reg = <0x47400000 0x1000 + 0x47402000 0x1000 + 0x47403000 0x1000 + 0x47404000 0x4000>; + reg-names = "glue", "controller", "scheduler", "queuemgr"; + interrupts = <17>; + interrupt-names = "glue"; + #dma-cells = <2>; + #dma-channels = <30>; + #dma-requests = <256>; }; }; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index a5441d5482a6..9ad829523a13 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -1,5 +1,8 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { @@ -61,7 +64,7 @@ 0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 Mem */ 0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */ - pcie-port@0 { + pcie0: pcie-port@0 { device_type = "pci"; status = "disabled"; assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; @@ -79,7 +82,7 @@ interrupt-map = <0 0 0 0 &intc 16>; }; - pcie-port@1 { + pcie1: pcie-port@1 { device_type = "pci"; status = "disabled"; assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; @@ -154,7 +157,7 @@ uart2: serial@12200 { compatible = "ns16550a"; - reg = <0x12000 0x100>; + reg = <0x12200 0x100>; reg-shift = <2>; interrupts = <9>; clocks = <&core_clk 0>; @@ -163,7 +166,7 @@ uart3: serial@12300 { compatible = "ns16550a"; - reg = <0x12100 0x100>; + reg = <0x12300 0x100>; reg-shift = <2>; interrupts = <10>; clocks = <&core_clk 0>; @@ -448,6 +451,11 @@ marvell,function = "gpio"; }; + pmx_pcie1_clkreq: pmx-pcie1-clkreq { + marvell,pins = "mpp9"; + marvell,function = "pex1"; + }; + pmx_gpio_10: pmx-gpio-10 { marvell,pins = "mpp10"; marvell,function = "gpio"; @@ -458,6 +466,11 @@ marvell,function = "gpio"; }; + pmx_pcie0_clkreq: pmx-pcie0-clkreq { + marvell,pins = "mpp11"; + marvell,function = "pex0"; + }; + pmx_gpio_12: pmx-gpio-12 { marvell,pins = "mpp12"; marvell,function = "gpio"; @@ -563,6 +576,18 @@ marvell,function = "gpio"; }; + pmx_spi1_4_7: pmx-spi1-4-7 { + marvell,pins = "mpp4", "mpp5", + "mpp6", "mpp7"; + marvell,function = "spi1"; + }; + + pmx_spi1_20_23: pmx-spi1-20-23 { + marvell,pins = "mpp20", "mpp21", + "mpp22", "mpp23"; + marvell,function = "spi1"; + }; + pmx_uart1: pmx-uart1 { marvell,pins = "mpp_uart1"; marvell,function = "uart1"; @@ -582,6 +607,36 @@ marvell,pins = "mpp_nand"; marvell,function = "gpo"; }; + + pmx_i2c1: pmx-i2c1 { + marvell,pins = "mpp17", "mpp19"; + marvell,function = "twsi"; + }; + + pmx_i2c2: pmx-i2c2 { + marvell,pins = "mpp_audio1"; + marvell,function = "twsi"; + }; + + pmx_ssp_i2c2: pmx-ssp-i2c2 { + marvell,pins = "mpp_audio1"; + marvell,function = "ssp/twsi"; + }; + + pmx_i2cmux_0: pmx-i2cmux-0 { + marvell,pins = "twsi"; + marvell,function = "twsi-opt1"; + }; + + pmx_i2cmux_1: pmx-i2cmux-1 { + marvell,pins = "twsi"; + marvell,function = "twsi-opt2"; + }; + + pmx_i2cmux_2: pmx-i2cmux-2 { + marvell,pins = "twsi"; + marvell,function = "twsi-opt3"; + }; }; core_clk: core-clocks@d0214 { diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 746cddb1b8f5..aa465904f6cc 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -263,17 +263,15 @@ dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < - 0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ - 0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */ + 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ + 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < - 0x3d0 (MUX_MODE15) /* dcan1_tx.off */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ - 0x418 (MUX_MODE15) /* wakeup0.off */ + 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ + 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; }; @@ -446,7 +444,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; - interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, <&dra7_pmx_core 0x3e0>; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 5827fedafd43..5332b57b4950 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -13,14 +13,13 @@ #include "skeleton.dtsi" #define MAX_SOURCES 400 -#define DIRECT_IRQ(irq) (MAX_SOURCES + irq) / { #address-cells = <1>; #size-cells = <1>; compatible = "ti,dra7xx"; - interrupt-parent = <&gic>; + interrupt-parent = <&crossbar_mpu>; aliases { i2c0 = &i2c1; @@ -50,18 +49,27 @@ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; }; gic: interrupt-controller@48211000 { compatible = "arm,cortex-a15-gic"; interrupt-controller; #interrupt-cells = <3>; - arm,routable-irqs = <192>; reg = <0x48211000 0x1000>, <0x48212000 0x1000>, <0x48214000 0x2000>, <0x48216000 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; + }; + + wakeupgen: interrupt-controller@48281000 { + compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48281000 0x1000>; + interrupt-parent = <&gic>; }; /* @@ -91,20 +99,104 @@ ti,hwmods = "l3_main_1", "l3_main_2"; reg = <0x44000000 0x1000000>, <0x45000000 0x1000>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI DIRECT_IRQ(10) IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - prm: prm@4ae06000 { - compatible = "ti,dra7-prm"; - reg = <0x4ae06000 0x3000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + l4_cfg: l4@4a000000 { + compatible = "ti,dra7-l4-cfg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a000000 0x22c000>; - prm_clocks: clocks { + scm: scm@2000 { + compatible = "ti,dra7-scm-core", "simple-bus"; + reg = <0x2000 0x2000>; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges = <0 0x2000 0x2000>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x1400>; + #address-cells = <1>; + #size-cells = <1>; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0xe00 0x4>; + syscon = <&scm_conf>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; + + dra7_pmx_core: pinmux@1400 { + compatible = "ti,dra7-padconf", + "pinctrl-single"; + reg = <0x1400 0x0464>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x3fffffff>; + }; + }; + + cm_core_aon: cm_core_aon@5000 { + compatible = "ti,dra7-cm-core-aon"; + reg = <0x5000 0x2000>; + + cm_core_aon_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_core_aon_clockdomains: clockdomains { + }; + }; + + cm_core: cm_core@8000 { + compatible = "ti,dra7-cm-core"; + reg = <0x8000 0x3000>; + + cm_core_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_core_clockdomains: clockdomains { + }; }; + }; + + l4_wkup: l4@4ae00000 { + compatible = "ti,dra7-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4ae00000 0x3f000>; + + counter32k: counter@4000 { + compatible = "ti,omap-counter32k"; + reg = <0x4000 0x40>; + ti,hwmods = "counter_32k"; + }; + + prm: prm@6000 { + compatible = "ti,dra7-prm"; + reg = <0x6000 0x3000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - prm_clockdomains: clockdomains { + prm_clockdomains: clockdomains { + }; }; }; @@ -177,36 +269,16 @@ }; }; - cm_core_aon: cm_core_aon@4a005000 { - compatible = "ti,dra7-cm-core-aon"; - reg = <0x4a005000 0x2000>; - - cm_core_aon_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm_core_aon_clockdomains: clockdomains { - }; - }; - - cm_core: cm_core@4a008000 { - compatible = "ti,dra7-cm-core"; - reg = <0x4a008000 0x3000>; - - cm_core_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm_core_clockdomains: clockdomains { - }; - }; - - counter32k: counter@4ae04000 { - compatible = "ti,omap-counter32k"; - reg = <0x4ae04000 0x40>; - ti,hwmods = "counter_32k"; + bandgap: bandgap@4a0021e0 { + reg = <0x4a0021e0 0xc + 0x4a00232c 0xc + 0x4a002380 0x2c + 0x4a0023C0 0x3c + 0x4a002564 0x8 + 0x4a002574 0x50>; + compatible = "ti,dra752-bandgap"; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; }; dra7_ctrl_core: ctrl_core@4a002000 { @@ -219,28 +291,6 @@ reg = <0x4a002e00 0x7c>; }; - pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; - reg = <0 0x4>; - syscon = <&dra7_ctrl_general>; - pbias_mmc_reg: pbias_mmc_omap5 { - regulator-name = "pbias_mmc_omap5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - }; - }; - - dra7_pmx_core: pinmux@4a003400 { - compatible = "ti,dra7-padconf", "pinctrl-single"; - reg = <0x4a003400 0x0464>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x3fffffff>; - }; - sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; @@ -249,8 +299,8 @@ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <127>; + dma-channels = <32>; + dma-requests = <127>; }; gpio1: gpio@4ae10000 { @@ -344,7 +394,7 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; status = "disabled"; @@ -355,7 +405,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts-extended = <&gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; status = "disabled"; @@ -366,7 +416,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; status = "disabled"; @@ -377,7 +427,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts-extended = <&gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; @@ -388,7 +438,7 @@ uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts-extended = <&gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; @@ -399,7 +449,7 @@ uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; @@ -410,7 +460,7 @@ uart7: serial@48420000 { compatible = "ti,omap4-uart"; reg = <0x48420000 0x100>; - interrupts-extended = <&gic GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart7"; clock-frequency = <48000000>; status = "disabled"; @@ -419,7 +469,7 @@ uart8: serial@48422000 { compatible = "ti,omap4-uart"; reg = <0x48422000 0x100>; - interrupts-extended = <&gic GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart8"; clock-frequency = <48000000>; status = "disabled"; @@ -428,7 +478,7 @@ uart9: serial@48424000 { compatible = "ti,omap4-uart"; reg = <0x48424000 0x100>; - interrupts-extended = <&gic GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart9"; clock-frequency = <48000000>; status = "disabled"; @@ -437,7 +487,7 @@ uart10: serial@4ae2b000 { compatible = "ti,omap4-uart"; reg = <0x4ae2b000 0x100>; - interrupts-extended = <&gic GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart10"; clock-frequency = <48000000>; status = "disabled"; @@ -658,7 +708,6 @@ reg = <0x48820000 0x80>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer5"; - ti,timer-dsp; }; timer6: timer@48822000 { @@ -666,8 +715,6 @@ reg = <0x48822000 0x80>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer6"; - ti,timer-dsp; - ti,timer-pwm; }; timer7: timer@48824000 { @@ -675,7 +722,6 @@ reg = <0x48824000 0x80>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer7"; - ti,timer-dsp; }; timer8: timer@48826000 { @@ -683,8 +729,6 @@ reg = <0x48826000 0x80>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer8"; - ti,timer-dsp; - ti,timer-pwm; }; timer9: timer@4803e000 { @@ -706,7 +750,6 @@ reg = <0x48088000 0x80>; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer11"; - ti,timer-pwm; }; timer13: timer@48828000 { @@ -1090,8 +1133,8 @@ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_sata>; - clocks = <&sys_clkin1>; - clock-names = "sysclk"; + clocks = <&sys_clkin1>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; #phy-cells = <0>; }; @@ -1111,7 +1154,6 @@ "wkupclk", "refclk", "div-clk", "phy-div"; #phy-cells = <0>; - ti,hwmods = "pcie1-phy"; }; pcie2_phy: pciephy@4a095000 { @@ -1130,7 +1172,6 @@ "wkupclk", "refclk", "div-clk", "phy-div"; #phy-cells = <0>; - ti,hwmods = "pcie2-phy"; status = "disabled"; }; }; @@ -1337,9 +1378,12 @@ status = "disabled"; }; - crossbar_mpu: crossbar@4a020000 { + crossbar_mpu: crossbar@4a002a48 { compatible = "ti,irq-crossbar"; reg = <0x4a002a48 0x130>; + interrupt-controller; + interrupt-parent = <&wakeupgen>; + #interrupt-cells = <3>; ti,max-irqs = <160>; ti,max-crossbar-sources = <MAX_SOURCES>; ti,reg-size = <2>; @@ -1410,7 +1454,7 @@ compatible = "ti,dra7-d_can"; ti,hwmods = "dcan1"; reg = <0x4ae3c000 0x2000>; - syscon-raminit = <&dra7_ctrl_core 0x558 0>; + syscon-raminit = <&scm_conf 0x558 0>; interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; clocks = <&dcan1_sys_clk_mux>; status = "disabled"; @@ -1420,12 +1464,23 @@ compatible = "ti,dra7-d_can"; ti,hwmods = "dcan2"; reg = <0x48480000 0x2000>; - syscon-raminit = <&dra7_ctrl_core 0x558 1>; + syscon-raminit = <&scm_conf 0x558 1>; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; clocks = <&sys_clkin1>; status = "disabled"; }; }; + + thermal_zones: thermal-zones { + #include "omap4-cpu-thermal.dtsi" + #include "omap5-gpu-thermal.dtsi" + #include "omap5-core-thermal.dtsi" + }; + +}; + +&cpu_thermal { + polling-delay = <500>; /* milliseconds */ }; /include/ "dra7xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 4d8711713610..ce0390f081d9 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -119,17 +119,15 @@ dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < - 0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ - 0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */ + 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ + 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < - 0x3d0 (MUX_MODE15) /* dcan1_tx.off */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ - 0x418 (MUX_MODE15) /* wakeup0.off */ + 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ + 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; @@ -160,7 +158,6 @@ pinctrl-0 = <&tps65917_pins_default>; interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ - interrupt-parent = <&gic>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index e5a3d23a3df1..03d742f8d572 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -20,11 +20,17 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; + + /* cooling options */ + cooling-min-level = <0>; + cooling-max-level = <2>; + #cooling-cells = <2>; /* min followed by max */ }; }; pmu { compatible = "arm,cortex-a15-pmu"; - interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&wakeupgen>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 10173fab1a15..cc560a70926f 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -31,6 +31,11 @@ clock-names = "cpu"; clock-latency = <300000>; /* From omap-cpufreq driver */ + + /* cooling options */ + cooling-min-level = <0>; + cooling-max-level = <2>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@1 { device_type = "cpu"; @@ -41,8 +46,9 @@ pmu { compatible = "arm,cortex-a15-pmu"; - interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI DIRECT_IRQ(132) IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&wakeupgen>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; }; ocp { diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 4bdcbd61ce47..3b933f74d000 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -243,10 +243,18 @@ ti,invert-autoidle-bit; }; + dpll_core_byp_mux: dpll_core_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x012c>; + }; + dpll_core_ck: dpll_core_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -309,10 +317,18 @@ clock-div = <1>; }; + dpll_dsp_byp_mux: dpll_dsp_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x0240>; + }; + dpll_dsp_ck: dpll_dsp_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>; reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>; }; @@ -335,10 +351,18 @@ clock-div = <1>; }; + dpll_iva_byp_mux: dpll_iva_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x01ac>; + }; + dpll_iva_ck: dpll_iva_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; }; @@ -361,10 +385,18 @@ clock-div = <1>; }; + dpll_gpu_byp_mux: dpll_gpu_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x02e4>; + }; + dpll_gpu_ck: dpll_gpu_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>; reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>; }; @@ -398,10 +430,18 @@ clock-div = <1>; }; + dpll_ddr_byp_mux: dpll_ddr_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x021c>; + }; + dpll_ddr_ck: dpll_ddr_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>; reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>; }; @@ -416,10 +456,18 @@ ti,invert-autoidle-bit; }; + dpll_gmac_byp_mux: dpll_gmac_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x02b4>; + }; + dpll_gmac_ck: dpll_gmac_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>; reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>; }; @@ -482,10 +530,18 @@ clock-div = <1>; }; + dpll_eve_byp_mux: dpll_eve_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x0290>; + }; + dpll_eve_ck: dpll_eve_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>; reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>; }; @@ -1249,10 +1305,18 @@ clock-div = <1>; }; + dpll_per_byp_mux: dpll_per_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x014c>; + }; + dpll_per_ck: dpll_per_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -1275,10 +1339,18 @@ clock-div = <1>; }; + dpll_usb_byp_mux: dpll_usb_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x018c>; + }; + dpll_usb_ck: dpll_usb_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; - clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; @@ -1421,6 +1493,14 @@ ti,dividers = <1>, <8>; }; + clkout2_clk: clkout2_clk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkoutmux2_clk_mux>; + ti,bit-shift = <8>; + reg = <0x06b0>; + }; + l3init_960m_gfclk: l3init_960m_gfclk { #clock-cells = <0>; compatible = "ti,gate-clock"; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 667d323e80a3..19446273e4a7 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -94,3 +94,16 @@ vdd33a-supply = <®_3p3v>; }; }; + +&pfc { + uart1_pins: uart@e1030000 { + renesas,groups = "uart1_ctrl", "uart1_data"; + renesas,function = "uart1"; + }; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index cc7bfe0ba40a..bb45694d91bc 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -169,12 +169,18 @@ clock-names = "sclk"; }; + pfc: pfc@e0140200 { + compatible = "renesas,pfc-emev2"; + reg = <0xe0140200 0x100>; + }; + gpio0: gpio@e0050000 { compatible = "renesas,em-gio"; reg = <0xe0050000 0x2c>, <0xe0050040 0x20>; interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>, <0 68 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; + gpio-ranges = <&pfc 0 0 32>; #gpio-cells = <2>; ngpios = <32>; interrupt-controller; @@ -186,6 +192,7 @@ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>, <0 70 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; + gpio-ranges = <&pfc 0 32 32>; #gpio-cells = <2>; ngpios = <32>; interrupt-controller; @@ -197,6 +204,7 @@ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>, <0 72 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; + gpio-ranges = <&pfc 0 64 32>; #gpio-cells = <2>; ngpios = <32>; interrupt-controller; @@ -208,6 +216,7 @@ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>, <0 74 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; + gpio-ranges = <&pfc 0 96 32>; #gpio-cells = <2>; ngpios = <32>; interrupt-controller; @@ -219,6 +228,7 @@ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>, <0 76 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; + gpio-ranges = <&pfc 0 128 31>; #gpio-cells = <2>; ngpios = <31>; interrupt-controller; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 277b48b0b6f9..e3bfb11c6ef8 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -18,6 +18,7 @@ */ #include "skeleton.dtsi" +#include "exynos4-cpu-thermal.dtsi" #include <dt-bindings/clock/exynos3250.h> / { @@ -130,6 +131,9 @@ pmu_system_controller: system-controller@10020000 { compatible = "samsung,exynos3250-pmu", "syscon"; reg = <0x10020000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; }; mipi_phy: video-phy@10020710 { @@ -172,6 +176,10 @@ compatible = "samsung,exynos3250-cmu"; reg = <0x10030000 0x20000>; #clock-cells = <1>; + assigned-clocks = <&cmu CLK_MOUT_ACLK_400_MCUISP_SUB>, + <&cmu CLK_MOUT_ACLK_266_SUB>; + assigned-clock-parents = <&cmu CLK_FIN_PLL>, + <&cmu CLK_FIN_PLL>; }; cmu_dmc: clock-controller@105C0000 { @@ -184,6 +192,7 @@ compatible = "samsung,exynos3250-rtc"; reg = <0x10070000 0x100>; interrupts = <0 73 0>, <0 74 0>; + interrupt-parent = <&pmu_system_controller>; status = "disabled"; }; @@ -193,6 +202,7 @@ interrupts = <0 216 0>; clocks = <&cmu CLK_TMU_APBIF>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi new file mode 100644 index 000000000000..735cb2f10817 --- /dev/null +++ b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi @@ -0,0 +1,52 @@ +/* + * Device tree sources for Exynos4 thermal zone + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/thermal/thermal.h> + +/ { +thermal-zones { + cpu_thermal: cpu-thermal { + thermal-sensors = <&tmu 0>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + cpu_alert0: cpu-alert-0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu_alert1: cpu-alert-1 { + temperature = <95000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu_alert0>; + }; + map1 { + trip = <&cpu_alert1>; + }; + }; + }; +}; +}; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 76173cacd450..e20cdc24c3bb 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -38,6 +38,7 @@ i2c5 = &i2c_5; i2c6 = &i2c_6; i2c7 = &i2c_7; + i2c8 = &i2c_8; csis0 = &csis_0; csis1 = &csis_1; fimc0 = &fimc_0; @@ -104,6 +105,7 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10023C20 0x20>; #power-domain-cells = <0>; + power-domains = <&pd_lcd0>; }; pd_cam: cam-power-domain@10023C00 { @@ -152,6 +154,9 @@ pmu_system_controller: system-controller@10020000 { compatible = "samsung,exynos4210-pmu", "syscon"; reg = <0x10020000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; }; dsi_0: dsi@11C80000 { @@ -264,6 +269,7 @@ rtc@10070000 { compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; + interrupt-parent = <&pmu_system_controller>; interrupts = <0 44 0>, <0 45 0>; clocks = <&clock CLK_RTC>; clock-names = "rtc"; @@ -554,6 +560,22 @@ status = "disabled"; }; + i2c_8: i2c@138E0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-hdmiphy-i2c"; + reg = <0x138E0000 0x100>; + interrupts = <0 93 0>; + clocks = <&clock CLK_I2C_HDMI>; + clock-names = "i2c"; + status = "disabled"; + + hdmi_i2c_phy: hdmiphy@38 { + compatible = "exynos4210-hdmiphy"; + reg = <0x38>; + }; + }; + spi_0: spi@13920000 { compatible = "samsung,exynos4210-spi"; reg = <0x13920000 0x100>; @@ -663,6 +685,33 @@ status = "disabled"; }; + tmu: tmu@100C0000 { + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + hdmi: hdmi@12D00000 { + compatible = "samsung,exynos4210-hdmi"; + reg = <0x12D00000 0x70000>; + interrupts = <0 92 0>; + clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", + "mout_hdmi"; + clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, + <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, + <&clock CLK_MOUT_HDMI>; + phy = <&hdmi_i2c_phy>; + power-domains = <&pd_tv>; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + }; + + mixer: mixer@12C10000 { + compatible = "samsung,exynos4210-mixer"; + interrupts = <0 91 0>; + reg = <0x12C10000 0x2100>, <0x12c00000 0x300>; + power-domains = <&pd_tv>; + status = "disabled"; + }; + ppmu_dmc0: ppmu_dmc0@106a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106a0000 0x2000>; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 3d6652a4b6cb..32c5fd8f6269 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -426,6 +426,25 @@ status = "okay"; }; + tmu@100C0000 { + status = "okay"; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 2 2>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 4 4>; + }; + }; + }; + }; + camera { pinctrl-names = "default"; pinctrl-0 = <>; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index b57e6b82ea20..d4f2b11319dd 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -505,6 +505,63 @@ assigned-clock-rates = <0>, <160000000>; }; }; + + hdmi_en: voltage-regulator-hdmi-5v { + compatible = "regulator-fixed"; + regulator-name = "HDMI_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpe0 1 0>; + enable-active-high; + }; + + hdmi_ddc: i2c-ddc { + compatible = "i2c-gpio"; + gpios = <&gpe4 2 0 &gpe4 3 0>; + i2c-gpio,delay-us = <100>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&i2c_ddc_bus>; + pinctrl-names = "default"; + status = "okay"; + }; + + mixer@12C10000 { + status = "okay"; + }; + + hdmi@12D00000 { + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + hdmi-en-supply = <&hdmi_en>; + vdd-supply = <&ldo3_reg>; + vdd_osc-supply = <&ldo4_reg>; + vdd_pll-supply = <&ldo3_reg>; + ddc = <&hdmi_ddc>; + status = "okay"; + }; + + i2c@138E0000 { + status = "okay"; + }; +}; + +&pinctrl_1 { + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = <0>; + }; +}; + +&pinctrl_0 { + i2c_ddc_bus: i2c-ddc-bus { + samsung,pins = "gpe4-2", "gpe4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; }; &mdma1 { diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 67c832c9dcf1..be89f83f70e7 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -21,6 +21,7 @@ #include "exynos4.dtsi" #include "exynos4210-pinctrl.dtsi" +#include "exynos4-cpu-thermal.dtsi" / { compatible = "samsung,exynos4210", "samsung,exynos4"; @@ -35,10 +36,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@900 { + cpu0: cpu@900 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x900>; + cooling-min-level = <4>; + cooling-max-level = <2>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@901 { @@ -153,16 +157,38 @@ reg = <0x03860000 0x1000>; }; - tmu@100C0000 { + tmu: tmu@100C0000 { compatible = "samsung,exynos4210-tmu"; interrupt-parent = <&combiner>; reg = <0x100C0000 0x100>; interrupts = <2 4>; clocks = <&clock CLK_TMU_APBIF>; clock-names = "tmu_apbif"; + samsung,tmu_gain = <15>; + samsung,tmu_reference_voltage = <7>; status = "disabled"; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert0: cpu-alert-0 { + temperature = <85000>; /* millicelsius */ + }; + cpu_alert1: cpu-alert-1 { + temperature = <100000>; /* millicelsius */ + }; + cpu_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + }; + }; + }; + }; + g2d@12800000 { compatible = "samsung,s5pv210-g2d"; reg = <0x12800000 0x1000>; @@ -203,6 +229,14 @@ }; }; + mixer: mixer@12C10000 { + clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer", + "sclk_mixer"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>, + <&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>; + }; + ppmu_lcd1: ppmu_lcd1@12240000 { compatible = "samsung,exynos-ppmu"; reg = <0x12240000 0x2000>; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index dd0a43ec56da..5be03288f1ee 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -26,10 +26,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@A00 { + cpu0: cpu@A00 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA00>; + cooling-min-level = <13>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@A01 { diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index de80b5bba204..8de12af7c276 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -75,10 +75,18 @@ }; }; + emmc_pwrseq: pwrseq { + pinctrl-0 = <&sd1_cd>; + pinctrl-names = "default"; + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpk1 2 1>; + }; + mmc@12550000 { pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; vmmc-supply = <&ldo20_reg &buck8_reg>; + mmc-pwrseq = <&emmc_pwrseq>; status = "okay"; num-slots = <1>; @@ -249,6 +257,20 @@ regulator-always-on; }; + ldo8_reg: ldo@8 { + regulator-compatible = "LDO8"; + regulator-name = "VDD10_HDMI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo10_reg: ldo@10 { + regulator-compatible = "LDO10"; + regulator-name = "VDDQ_MIPIHSI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo11_reg: LDO11 { regulator-name = "VDD18_ABB1_1.8V"; regulator-min-microvolt = <1800000>; @@ -411,6 +433,57 @@ ehci: ehci@12580000 { status = "okay"; }; + + tmu@100C0000 { + vtmu-supply = <&ldo10_reg>; + status = "okay"; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>; + }; + }; + }; + }; + + mixer: mixer@12C10000 { + status = "okay"; + }; + + hdmi@12D00000 { + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; + ddc = <&hdmi_ddc>; + status = "okay"; + }; + + hdmi_ddc: i2c@13880000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; + }; + + i2c@138E0000 { + status = "okay"; + }; +}; + +/* RSTN signal for eMMC */ +&sd1_cd { + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; }; &pinctrl_1 { @@ -425,4 +498,9 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = <1>; + }; }; diff --git a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi new file mode 100644 index 000000000000..e3f7934d19d0 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi @@ -0,0 +1,24 @@ +/* + * Device tree sources for Exynos4412 TMU sensor configuration + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/thermal/thermal_exynos.h> + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <8>; +samsung,tmu_reference_voltage = <16>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <55>; +samsung,tmu_min_efuse_value = <40>; +samsung,tmu_max_efuse_value = <100>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <85>; +samsung,tmu_default_temp_offset = <50>; +samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 21f748083586..173ffa479ad3 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -927,6 +927,21 @@ pulldown-ohm = <100000>; /* 100K */ io-channels = <&adc 2>; /* Battery temperature */ }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>; + }; + }; + }; + }; }; &pmu_system_controller { diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 0f6ec93bb1d8..68ad43b391ae 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -26,10 +26,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@A00 { + cpu0: cpu@A00 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA00>; + cooling-min-level = <13>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@A01 { diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index f5e0ae780d6c..6a6abe14fd9b 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -19,6 +19,7 @@ #include "exynos4.dtsi" #include "exynos4x12-pinctrl.dtsi" +#include "exynos4-cpu-thermal.dtsi" / { aliases { @@ -297,4 +298,15 @@ clock-names = "tmu_apbif"; status = "disabled"; }; + + hdmi: hdmi@12D00000 { + compatible = "samsung,exynos4212-hdmi"; + }; + + mixer: mixer@12C10000 { + compatible = "samsung,exynos4212-mixer"; + clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index b9aeec430527..2657e842e5a5 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -29,6 +29,7 @@ chosen { bootargs = "console=tty1"; + stdout-path = "serial3:115200n8"; }; gpio-keys { @@ -183,7 +184,20 @@ powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; edid-emulation = <5>; - panel = <&panel>; + + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; }; }; @@ -228,6 +242,20 @@ compatible = "auo,b116xw03"; power-supply = <&fet6>; backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; + + mmc3_pwrseq: mmc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */ + <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */ + clocks = <&max77686 MAX77686_CLK_PMIC>; + clock-names = "ext_clock"; }; }; @@ -242,7 +270,14 @@ samsung,link-rate = <0x0a>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; - bridge = <&ptn3460>; + + ports { + port@0 { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; }; &ehci { @@ -531,17 +566,33 @@ status = "okay"; num-slots = <1>; broken-cd; + cap-sdio-irq; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>; bus-width = <4>; cap-sd-highspeed; + mmc-pwrseq = <&mmc3_pwrseq>; }; &pinctrl_0 { + wifi_en: wifi-en { + samsung,pins = "gpx0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + wifi_rst: wifi-rst { + samsung,pins = "gpx0-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + power_key_irq: power-key-irq { samsung,pins = "gpx1-3"; samsung,pin-function = <0xf>; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index f02775487cd4..d03f9b8d376d 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=tty1"; + stdout-path = "serial3:115200n8"; }; gpio-keys { @@ -429,7 +430,6 @@ &mmc_0 { status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; @@ -437,11 +437,8 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; /* @@ -451,7 +448,6 @@ &mmc_1 { status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; @@ -459,11 +455,8 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-sd-highspeed; }; &pinctrl_0 { @@ -490,7 +483,7 @@ power_key_irq: power-key-irq { samsung,pins = "gpx1-3"; - samsung,pin-function = <0>; + samsung,pin-function = <0xf>; samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; @@ -518,7 +511,7 @@ lid_irq: lid-irq { samsung,pins = "gpx3-5"; - samsung,pin-function = <0>; + samsung,pin-function = <0xf>; samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 9bb1b0b738f5..257e2f10525d 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -20,7 +20,7 @@ #include <dt-bindings/clock/exynos5250.h> #include "exynos5.dtsi" #include "exynos5250-pinctrl.dtsi" - +#include "exynos4-cpu-thermal.dtsi" #include <dt-bindings/clock/exynos-audss-clk.h> / { @@ -58,11 +58,14 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1700000000>; + cooling-min-level = <15>; + cooling-max-level = <9>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@1 { device_type = "cpu"; @@ -102,6 +105,12 @@ #power-domain-cells = <0>; }; + pd_disp1: disp1-power-domain@100440A0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100440A0 0x20>; + #power-domain-cells = <0>; + }; + clock: clock-controller@10010000 { compatible = "samsung,exynos5250-clock"; reg = <0x10010000 0x30000>; @@ -134,7 +143,7 @@ compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; interrupt-controller; - #interrups-cells = <2>; + #interrupt-cells = <2>; interrupt-parent = <&mct_map>; interrupts = <0 0>, <1 0>, <2 0>, <3 0>, <4 0>, <5 0>; @@ -196,6 +205,9 @@ clock-names = "clkout16"; clocks = <&clock CLK_FIN_PLL>; #clock-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; }; sysreg_system_controller: syscon@10050000 { @@ -232,15 +244,36 @@ rtc: rtc@101E0000 { clocks = <&clock CLK_RTC>; clock-names = "rtc"; + interrupt-parent = <&pmu_system_controller>; status = "disabled"; }; - tmu@10060000 { + tmu: tmu@10060000 { compatible = "samsung,exynos5250-tmu"; reg = <0x10060000 0x100>; interrupts = <0 65 0>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tmu 0>; + + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 9 9>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 15 15>; + }; + }; + }; }; serial@12C00000 { @@ -719,6 +752,7 @@ hdmi: hdmi { compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; + power-domains = <&pd_disp1>; interrupts = <0 95 0>; clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, @@ -731,9 +765,11 @@ mixer { compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; + power-domains = <&pd_disp1>; interrupts = <0 94 0>; - clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>; - clock-names = "mixer", "sclk_hdmi"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>; + clock-names = "mixer", "hdmi", "sclk_hdmi"; }; dp_phy: video-phy@10040720 { @@ -743,6 +779,7 @@ }; dp: dp-controller@145B0000 { + power-domains = <&pd_disp1>; clocks = <&clock CLK_DP>; clock-names = "dp"; phys = <&dp_phy>; @@ -750,6 +787,7 @@ }; fimd: fimd@14400000 { + power-domains = <&pd_disp1>; clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; }; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index db2c1c4cd900..b82b6fa15f48 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -55,7 +55,7 @@ samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; vmmc-supply = <&ldo10_reg>; bus-width = <8>; cap-mmc-highspeed; @@ -68,7 +68,7 @@ samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; vmmc-supply = <&ldo19_reg>; vqmmc-supply = <&ldo13_reg>; bus-width = <4>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index c47bb70665c1..0788d08fb43e 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -43,6 +43,10 @@ pinctrl-names = "default"; }; + chosen { + stdout-path = "serial3:115200n8"; + }; + fixed-rate-clocks { oscclk { compatible = "samsung,exynos5420-oscclk"; @@ -118,6 +122,19 @@ compatible = "auo,b116xw03"; power-supply = <&tps65090_fet6>; backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; + + mmc1_pwrseq: mmc1_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */ + clocks = <&max77802 MAX77802_CLK_32K_CP>; + clock-names = "ext_clock"; }; }; @@ -137,7 +154,14 @@ samsung,link-rate = <0x06>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx2 6 0>; - bridge = <&ps8625>; + + ports { + port@0 { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; }; &fimd { @@ -581,6 +605,8 @@ interrupt-parent = <&gpx0>; pinctrl-names = "default"; pinctrl-0 = <&max98090_irq>; + clocks = <&pmu_system_controller 0>; + clock-names = "mclk"; }; light-sensor@44 { @@ -595,8 +621,22 @@ sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>; lane-count = <2>; - panel = <&panel>; use-external-pwm; + + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; + }; }; @@ -659,11 +699,32 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>; bus-width = <8>; }; +&mmc_1 { + status = "okay"; + num-slots = <1>; + broken-cd; + cap-sdio-irq; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <1>; + samsung,dw-mshc-sdr-timing = <0 1>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>, + <&sd1_bus4>, <&sd1_bus8>, <&wifi_en>; + bus-width = <4>; + cap-sd-highspeed; + mmc-pwrseq = <&mmc1_pwrseq>; + vqmmc-supply = <&buck10_reg>; +}; + &mmc_2 { status = "okay"; num-slots = <1>; @@ -674,7 +735,7 @@ samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; bus-width = <4>; }; @@ -683,6 +744,13 @@ pinctrl-names = "default"; pinctrl-0 = <&mask_tpm_reset>; + wifi_en: wifi-en { + samsung,pins = "gpx0-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + max98090_irq: max98090-irq { samsung,pins = "gpx0-2"; samsung,pin-function = <0>; @@ -770,6 +838,29 @@ }; }; +&pinctrl_1 { + /* Adjust WiFi drive strengths lower for EMI */ + sd1_clk: sd1-clk { + samsung,pin-drv = <2>; + }; + + sd1_cmd: sd1-cmd { + samsung,pin-drv = <2>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pin-drv = <2>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pin-drv = <2>; + }; + + sd1_bus8: sd1-bus-width8 { + samsung,pin-drv = <2>; + }; +}; + &pinctrl_2 { pmic_dvs_2: pmic-dvs-2 { samsung,pins = "gpj4-2"; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index ba686e40eac7..8b153166ebdb 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -201,6 +201,13 @@ samsung,pin-drv = <3>; }; + sd0_rclk: sd0-rclk { + samsung,pins = "gpc0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + sd1_cmd: sd1-cmd { samsung,pins = "gpc1-1"; samsung,pin-function = <2>; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 8be3d7b489ff..9103f2381a6d 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -80,8 +80,11 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 + &sd0_rclk>; bus-width = <8>; cap-mmc-highspeed; }; @@ -93,7 +96,7 @@ samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; bus-width = <4>; cap-sd-highspeed; }; diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi new file mode 100644 index 000000000000..5d31fc140823 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi @@ -0,0 +1,35 @@ +/* + * Device tree sources for default Exynos5420 thermal zone definition + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +polling-delay-passive = <0>; +polling-delay = <0>; +trips { + cpu-alert-0 { + temperature = <85000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu-alert-1 { + temperature = <103000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu-crit-0 { + temperature = <1200000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 9dc2e9773b30..f67b23f303c3 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -221,7 +221,7 @@ compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; interrupt-controller; - #interrups-cells = <1>; + #interrupt-cells = <1>; interrupt-parent = <&mct_map>; interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>, <9>, <10>, <11>; @@ -251,6 +251,8 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; #power-domain-cells = <0>; + clocks = <&clock CLK_GSCL0>, <&clock CLK_GSCL1>; + clock-names = "asb0", "asb1"; }; isp_pd: power-domain@10044020 { @@ -283,9 +285,11 @@ <&clock CLK_MOUT_SW_ACLK300>, <&clock CLK_MOUT_USER_ACLK300_DISP1>, <&clock CLK_MOUT_SW_ACLK400>, - <&clock CLK_MOUT_USER_ACLK400_DISP1>; + <&clock CLK_MOUT_USER_ACLK400_DISP1>, + <&clock CLK_FIMD1>, <&clock CLK_MIXER>; clock-names = "oscclk", "pclk0", "clk0", - "pclk1", "clk1", "pclk2", "clk2"; + "pclk1", "clk1", "pclk2", "clk2", + "asb0", "asb1"; }; pinctrl_0: pinctrl@13400000 { @@ -327,6 +331,7 @@ rtc: rtc@101E0000 { clocks = <&clock CLK_RTC>; clock-names = "rtc"; + interrupt-parent = <&pmu_system_controller>; status = "disabled"; }; @@ -740,8 +745,9 @@ compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; interrupts = <0 94 0>; - clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>; - clock-names = "mixer", "sclk_hdmi"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>; + clock-names = "mixer", "hdmi", "sclk_hdmi"; power-domains = <&disp_pd>; }; @@ -769,6 +775,9 @@ clock-names = "clkout16"; clocks = <&clock CLK_FIN_PLL>; #clock-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; }; sysreg_system_controller: syscon@10050000 { @@ -782,6 +791,7 @@ interrupts = <0 65 0>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_cpu1: tmu@10064000 { @@ -790,6 +800,7 @@ interrupts = <0 183 0>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_cpu2: tmu@10068000 { @@ -798,6 +809,7 @@ interrupts = <0 184 0>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_cpu3: tmu@1006c000 { @@ -806,6 +818,7 @@ interrupts = <0 185 0>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_gpu: tmu@100a0000 { @@ -814,6 +827,30 @@ interrupts = <0 215 0>; clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0>; + #include "exynos5420-trip-points.dtsi" + }; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmu_cpu1>; + #include "exynos5420-trip-points.dtsi" + }; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmu_cpu2>; + #include "exynos5420-trip-points.dtsi" + }; + cpu3_thermal: cpu3-thermal { + thermal-sensors = <&tmu_cpu3>; + #include "exynos5420-trip-points.dtsi" + }; + gpu_thermal: gpu-thermal { + thermal-sensors = <&tmu_gpu>; + #include "exynos5420-trip-points.dtsi" + }; }; watchdog: watchdog@101D0000 { diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index a519c863248d..edc25cf1d717 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -264,6 +264,13 @@ }; }; + emmc_pwrseq: pwrseq { + pinctrl-0 = <&emmc_nrst_pin>; + pinctrl-names = "default"; + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpd1 0 1>; + }; + i2c_2: i2c@12C80000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; @@ -298,13 +305,14 @@ &mmc_0 { status = "okay"; + mmc-pwrseq = <&emmc_pwrseq>; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; }; @@ -316,7 +324,7 @@ samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; bus-width = <4>; cap-sd-highspeed; }; @@ -330,6 +338,15 @@ }; }; +&pinctrl_1 { + emmc_nrst_pin: emmc-nrst { + samsung,pins = "gpd1-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + &usbdrd_dwc3_0 { dr_mode = "host"; }; diff --git a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi new file mode 100644 index 000000000000..7b2fba0ae92b --- /dev/null +++ b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi @@ -0,0 +1,24 @@ +/* + * Device tree sources for Exynos5440 TMU sensor configuration + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/thermal/thermal_exynos.h> + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <5>; +samsung,tmu_reference_voltage = <16>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <0x5d2d>; +samsung,tmu_min_efuse_value = <16>; +samsung,tmu_max_efuse_value = <76>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <70>; +samsung,tmu_default_temp_offset = <25>; +samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi new file mode 100644 index 000000000000..48adfa8f4300 --- /dev/null +++ b/arch/arm/boot/dts/exynos5440-trip-points.dtsi @@ -0,0 +1,25 @@ +/* + * Device tree sources for default Exynos5440 thermal zone definition + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +polling-delay-passive = <0>; +polling-delay = <0>; +trips { + cpu-alert-0 { + temperature = <100000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "active"; + }; + cpu-crit-0 { + temperature = <1050000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; +}; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 8f3373cd7b87..59d9416b3b03 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -219,6 +219,7 @@ interrupts = <0 58 0>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" }; tmuctrl_1: tmuctrl@16011C { @@ -227,6 +228,7 @@ interrupts = <0 58 0>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" }; tmuctrl_2: tmuctrl@160120 { @@ -235,6 +237,22 @@ interrupts = <0 58 0>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmuctrl_0>; + #include "exynos5440-trip-points.dtsi" + }; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmuctrl_1>; + #include "exynos5440-trip-points.dtsi" + }; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmuctrl_2>; + #include "exynos5440-trip-points.dtsi" + }; }; sata@210000 { diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 06737c60d333..412f41d62686 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -42,6 +42,10 @@ pinctrl-names = "default"; }; + chosen { + stdout-path = "serial3:115200n8"; + }; + fixed-rate-clocks { oscclk { compatible = "samsung,exynos5420-oscclk"; @@ -119,6 +123,13 @@ power-supply = <&tps65090_fet6>; backlight = <&backlight>; }; + + mmc1_pwrseq: mmc1_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */ + clocks = <&max77802 MAX77802_CLK_32K_CP>; + clock-names = "ext_clock"; + }; }; &adc { @@ -581,6 +592,8 @@ interrupt-parent = <&gpx0>; pinctrl-names = "default"; pinctrl-0 = <&max98091_irq>; + clocks = <&pmu_system_controller 0>; + clock-names = "mclk"; }; light-sensor@44 { @@ -641,18 +654,40 @@ num-slots = <1>; broken-cd; mmc-hs200-1_8v; + mmc-hs400-1_8v; cap-mmc-highspeed; non-removable; card-detect-delay = <200>; - clock-frequency = <400000000>; + clock-frequency = <800000000>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>; bus-width = <8>; }; +&mmc_1 { + status = "okay"; + num-slots = <1>; + broken-cd; + cap-sdio-irq; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <1>; + samsung,dw-mshc-sdr-timing = <0 1>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>, + <&sd1_bus4>, <&sd1_bus8>, <&wifi_en>; + bus-width = <4>; + cap-sd-highspeed; + mmc-pwrseq = <&mmc1_pwrseq>; + vqmmc-supply = <&buck10_reg>; +}; + &mmc_2 { status = "okay"; num-slots = <1>; @@ -663,7 +698,7 @@ samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; bus-width = <4>; }; @@ -672,6 +707,13 @@ pinctrl-names = "default"; pinctrl-0 = <&mask_tpm_reset>; + wifi_en: wifi-en { + samsung,pins = "gpx0-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + max98091_irq: max98091-irq { samsung,pins = "gpx0-2"; samsung,pin-function = <0>; @@ -759,6 +801,29 @@ }; }; +&pinctrl_1 { + /* Adjust WiFi drive strengths lower for EMI */ + sd1_clk: sd1-clk { + samsung,pin-drv = <2>; + }; + + sd1_cmd: sd1-cmd { + samsung,pin-drv = <2>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pin-drv = <2>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pin-drv = <2>; + }; + + sd1_bus8: sd1-bus-width8 { + samsung,pin-drv = <2>; + }; +}; + &pinctrl_2 { pmic_dvs_2: pmic-dvs-2 { samsung,pins = "gpj4-2"; diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi index 238814596a87..44044f275115 100644 --- a/arch/arm/boot/dts/hip04.dtsi +++ b/arch/arm/boot/dts/hip04.dtsi @@ -275,7 +275,6 @@ compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0 0xe3c42000 0 0x1000>; - coresight-default-sink; clocks = <&clk_375m>; clock-names = "apb_pclk"; port { diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index 9c21b1583762..dd45e6971bc3 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -75,6 +75,27 @@ mux-int-port = <1>; mux-ext-port = <4>; }; + + wvga: display { + model = "CLAA057VC01CW"; + bits-per-pixel = <16>; + fsl,pcr = <0xfa208b80>; + bus-width = <18>; + native-mode = <&wvga_timings>; + display-timings { + wvga_timings: 640x480 { + hactive = <640>; + vactive = <480>; + hback-porch = <45>; + hfront-porch = <114>; + hsync-len = <1>; + vback-porch = <33>; + vfront-porch = <11>; + vsync-len = <1>; + clock-frequency = <25200000>; + }; + }; + }; }; &audmux { @@ -190,6 +211,33 @@ >; }; + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX25_PAD_LD0__LD0 0xe0 + MX25_PAD_LD1__LD1 0xe0 + MX25_PAD_LD2__LD2 0xe0 + MX25_PAD_LD3__LD3 0xe0 + MX25_PAD_LD4__LD4 0xe0 + MX25_PAD_LD5__LD5 0xe0 + MX25_PAD_LD6__LD6 0xe0 + MX25_PAD_LD7__LD7 0xe0 + MX25_PAD_LD8__LD8 0xe0 + MX25_PAD_LD9__LD9 0xe0 + MX25_PAD_LD10__LD10 0xe0 + MX25_PAD_LD11__LD11 0xe0 + MX25_PAD_LD12__LD12 0xe0 + MX25_PAD_LD13__LD13 0xe0 + MX25_PAD_LD14__LD14 0xe0 + MX25_PAD_LD15__LD15 0xe0 + MX25_PAD_GPIO_E__LD16 0xe0 + MX25_PAD_GPIO_F__LD17 0xe0 + MX25_PAD_HSYNC__HSYNC 0xe0 + MX25_PAD_VSYNC__VSYNC 0xe0 + MX25_PAD_LSCLK__LSCLK 0xe0 + MX25_PAD_OE_ACD__OE_ACD 0xe0 + MX25_PAD_CONTRAST__CONTRAST 0xe0 + >; + }; pinctrl_uart1: uart1grp { fsl,pins = < @@ -202,6 +250,16 @@ }; }; +&lcdc { + display = <&wvga>; + fsl,lpccr = <0x00a903ff>; + fsl,lscr1 = <0x00120300>; + fsl,dmacr = <0x00020010>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + status = "okay"; +}; + &nfc { nand-on-flash-bbt; status = "okay"; diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index 88eebb15da6a..7c4b9f2f9aad 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -17,48 +17,69 @@ * <mux_reg conf_reg input_reg mux_mode input_val> */ +#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000 + #define MX25_PAD_A10__A10 0x008 0x000 0x000 0x00 0x000 #define MX25_PAD_A10__GPIO_4_0 0x008 0x000 0x000 0x05 0x000 #define MX25_PAD_A13__A13 0x00c 0x22C 0x000 0x00 0x000 #define MX25_PAD_A13__GPIO_4_1 0x00c 0x22C 0x000 0x05 0x000 +#define MX25_PAD_A13__LCDC_CLS 0x00c 0x22C 0x000 0x07 0x000 #define MX25_PAD_A14__A14 0x010 0x230 0x000 0x10 0x000 #define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x15 0x000 +#define MX25_PAD_A14__SIM1_CLK1 0x010 0x230 0x000 0x16 0x000 +#define MX25_PAD_A14__LCDC_SPL 0x010 0x230 0x000 0x17 0x000 #define MX25_PAD_A15__A15 0x014 0x234 0x000 0x10 0x000 #define MX25_PAD_A15__GPIO_2_1 0x014 0x234 0x000 0x15 0x000 +#define MX25_PAD_A15__SIM1_RST1 0x014 0x234 0x000 0x16 0x000 +#define MX25_PAD_A15__LCDC_PS 0x014 0x234 0x000 0x17 0x000 #define MX25_PAD_A16__A16 0x018 0x000 0x000 0x10 0x000 #define MX25_PAD_A16__GPIO_2_2 0x018 0x000 0x000 0x15 0x000 +#define MX25_PAD_A16__SIM1_VEN1 0x018 0x000 0x000 0x16 0x000 +#define MX25_PAD_A16__LCDC_REV 0x018 0x000 0x000 0x17 0x000 #define MX25_PAD_A17__A17 0x01c 0x238 0x000 0x10 0x000 #define MX25_PAD_A17__GPIO_2_3 0x01c 0x238 0x000 0x15 0x000 +#define MX25_PAD_A17__SIM1_TX 0x01c 0x238 0x554 0x16 0x000 +#define MX25_PAD_A17__FEC_TX_ERR 0x01c 0x238 0x000 0x17 0x000 #define MX25_PAD_A18__A18 0x020 0x23c 0x000 0x10 0x000 #define MX25_PAD_A18__GPIO_2_4 0x020 0x23c 0x000 0x15 0x000 +#define MX25_PAD_A18__SIM1_PD1 0x020 0x23c 0x550 0x16 0x000 #define MX25_PAD_A18__FEC_COL 0x020 0x23c 0x504 0x17 0x000 #define MX25_PAD_A19__A19 0x024 0x240 0x000 0x10 0x000 -#define MX25_PAD_A19__FEC_RX_ER 0x024 0x240 0x518 0x17 0x000 #define MX25_PAD_A19__GPIO_2_5 0x024 0x240 0x000 0x15 0x000 +#define MX25_PAD_A19__SIM1_RX1 0x024 0x240 0x54c 0x16 0x000 +#define MX25_PAD_A19__FEC_RX_ERR 0x024 0x240 0x518 0x17 0x000 #define MX25_PAD_A20__A20 0x028 0x244 0x000 0x10 0x000 #define MX25_PAD_A20__GPIO_2_6 0x028 0x244 0x000 0x15 0x000 +#define MX25_PAD_A20__SIM2_CLK1 0x028 0x244 0x000 0x16 0x000 #define MX25_PAD_A20__FEC_RDATA2 0x028 0x244 0x50c 0x17 0x000 #define MX25_PAD_A21__A21 0x02c 0x248 0x000 0x10 0x000 #define MX25_PAD_A21__GPIO_2_7 0x02c 0x248 0x000 0x15 0x000 +#define MX25_PAD_A21__SIM2_RST1 0x02c 0x248 0x000 0x16 0x000 #define MX25_PAD_A21__FEC_RDATA3 0x02c 0x248 0x510 0x17 0x000 #define MX25_PAD_A22__A22 0x030 0x000 0x000 0x10 0x000 #define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x15 0x000 +#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x17 0x000 +#define MX25_PAD_A22__SIM2_VEN1 0x030 0x000 0x000 0x16 0x000 +#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x17 0x000 #define MX25_PAD_A23__A23 0x034 0x24c 0x000 0x10 0x000 #define MX25_PAD_A23__GPIO_2_9 0x034 0x24c 0x000 0x15 0x000 +#define MX25_PAD_A23__SIM2_TX1 0x034 0x24c 0x560 0x16 0x000 +#define MX25_PAD_A23__FEC_TDATA3 0x034 0x24c 0x000 0x17 0x000 #define MX25_PAD_A24__A24 0x038 0x250 0x000 0x10 0x000 #define MX25_PAD_A24__GPIO_2_10 0x038 0x250 0x000 0x15 0x000 +#define MX25_PAD_A24__SIM2_PD1 0x038 0x250 0x55c 0x16 0x000 #define MX25_PAD_A24__FEC_RX_CLK 0x038 0x250 0x514 0x17 0x000 #define MX25_PAD_A25__A25 0x03c 0x254 0x000 0x10 0x000 @@ -133,20 +154,25 @@ #define MX25_PAD_D15__D15 0x088 0x280 0x000 0x00 0x000 #define MX25_PAD_D15__LD16 0x088 0x280 0x000 0x01 0x000 #define MX25_PAD_D15__GPIO_4_5 0x088 0x280 0x000 0x05 0x000 +#define MX25_PAD_D15__SDHC1_DAT7 0x088 0x280 0x4d8 0x06 0x000 #define MX25_PAD_D14__D14 0x08c 0x284 0x000 0x00 0x000 #define MX25_PAD_D14__LD17 0x08c 0x284 0x000 0x01 0x000 #define MX25_PAD_D14__GPIO_4_6 0x08c 0x284 0x000 0x05 0x000 +#define MX25_PAD_D14__SDHC1_DAT6 0x08c 0x284 0x4d4 0x06 0x000 #define MX25_PAD_D13__D13 0x090 0x288 0x000 0x00 0x000 #define MX25_PAD_D13__LD18 0x090 0x288 0x000 0x01 0x000 #define MX25_PAD_D13__GPIO_4_7 0x090 0x288 0x000 0x05 0x000 +#define MX25_PAD_D13__SDHC1_DAT5 0x090 0x288 0x4d0 0x06 0x000 #define MX25_PAD_D12__D12 0x094 0x28c 0x000 0x00 0x000 #define MX25_PAD_D12__GPIO_4_8 0x094 0x28c 0x000 0x05 0x000 +#define MX25_PAD_D12__SDHC1_DAT4 0x094 0x28c 0x4cc 0x06 0x000 #define MX25_PAD_D11__D11 0x098 0x290 0x000 0x00 0x000 #define MX25_PAD_D11__GPIO_4_9 0x098 0x290 0x000 0x05 0x000 +#define MX25_PAD_D11__USBOTG_PWR 0x098 0x290 0x000 0x06 0x000 #define MX25_PAD_D10__D10 0x09c 0x294 0x000 0x00 0x000 #define MX25_PAD_D10__GPIO_4_10 0x09c 0x294 0x000 0x05 0x000 @@ -212,26 +238,33 @@ #define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x10 0x000 #define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x15 0x000 +#define MX25_PAD_LD8__SDHC2_CMD 0x0e8 0x2e0 0x4e0 0x06 0x000 #define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x10 0x000 #define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x15 0x001 +#define MX25_PAD_LD9__SDHC2_CLK 0x0ec 0x2e4 0x4dc 0x06 0x000 #define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x10 0x000 -#define MX25_PAD_LD10__FEC_RX_ER 0x0f0 0x2e8 0x518 0x15 0x001 +#define MX25_PAD_LD10__FEC_RX_ERR 0x0f0 0x2e8 0x518 0x15 0x001 #define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x10 0x000 #define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x15 0x001 +#define MX25_PAD_LD11__SDHC2_DAT1 0x0f4 0x2ec 0x4e8 0x06 0x000 #define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x10 0x000 +#define MX25_PAD_LD12__CSPI2_MOSI 0x0f8 0x2f0 0x4a0 0x02 0x000 #define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x15 0x001 #define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x10 0x000 +#define MX25_PAD_LD13__CSPI2_MISO 0x0fc 0x2f4 0x49c 0x02 0x000 #define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x15 0x000 #define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x10 0x000 +#define MX25_PAD_LD14__CSPI2_SCLK 0x100 0x2f8 0x494 0x02 0x000 #define MX25_PAD_LD14__FEC_TDATA3 0x100 0x2f8 0x000 0x15 0x000 #define MX25_PAD_LD15__LD15 0x104 0x2fc 0x000 0x10 0x000 +#define MX25_PAD_LD15__CSPI2_RDY 0x104 0x2fc 0x498 0x02 0x000 #define MX25_PAD_LD15__FEC_RX_CLK 0x104 0x2fc 0x514 0x15 0x001 #define MX25_PAD_HSYNC__HSYNC 0x108 0x300 0x000 0x10 0x000 @@ -244,6 +277,7 @@ #define MX25_PAD_LSCLK__GPIO_1_24 0x110 0x308 0x000 0x15 0x000 #define MX25_PAD_OE_ACD__OE_ACD 0x114 0x30c 0x000 0x10 0x000 +#define MX25_PAD_OE_ACD__CSPI2_SS0 0x114 0x30c 0x4a4 0x02 0x000 #define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x15 0x000 #define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x10 0x000 @@ -257,26 +291,31 @@ #define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x10 0x000 #define MX25_PAD_CSI_D2__UART5_RXD_MUX 0x120 0x318 0x578 0x11 0x001 +#define MX25_PAD_CSI_D2__SIM1_CLK0 0x120 0x318 0x000 0x04 0x000 #define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x15 0x000 #define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000 #define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000 #define MX25_PAD_CSI_D3__UART5_TXD_MUX 0x124 0x31c 0x000 0x11 0x000 +#define MX25_PAD_CSI_D3__SIM1_RST0 0x124 0x31c 0x000 0x04 0x000 #define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000 #define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001 #define MX25_PAD_CSI_D4__CSI_D4 0x128 0x320 0x000 0x10 0x000 #define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x11 0x001 +#define MX25_PAD_CSI_D4__SIM1_VEN0 0x128 0x320 0x000 0x04 0x000 #define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x15 0x000 #define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x17 0x000 #define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000 -#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x001 +#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x000 +#define MX25_PAD_CSI_D5__SIM1_TX0 0x12c 0x324 0x000 0x04 0x000 #define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x15 0x000 #define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x17 0x000 #define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x10 0x000 #define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x12 0x001 +#define MX25_PAD_CSI_D6__SIM1_PD0 0x130 0x328 0x000 0x04 0x000 #define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x15 0x000 #define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x10 0x000 @@ -284,32 +323,32 @@ #define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x15 0x000 #define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x10 0x000 -#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x12 0x001 +#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x12 0x000 #define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x15 0x000 #define MX25_PAD_CSI_D8__CSPI3_SS2 0x138 0x330 0x4c4 0x17 0x000 #define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x10 0x000 -#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x12 0x001 +#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x12 0x000 #define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x15 0x000 #define MX25_PAD_CSI_D9__CSPI3_SS3 0x13c 0x334 0x4c8 0x17 0x000 #define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x10 0x000 -#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x11 0x001 +#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x11 0x000 #define MX25_PAD_CSI_MCLK__SDHC2_DAT0 0x140 0x338 0x4e4 0x12 0x001 #define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x15 0x000 #define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x10 0x000 -#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x11 0x001 +#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x11 0x000 #define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 0x144 0x33c 0x4e8 0x12 0x001 #define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x15 0x000 #define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x10 0x000 -#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x11 0x001 +#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x11 0x000 #define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 0x148 0x340 0x4ec 0x12 0x001 #define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x15 0x000 #define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x10 0x000 -#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x11 0x001 +#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x11 0x000 #define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 0x14c 0x344 0x4f0 0x12 0x001 #define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x15 0x000 @@ -369,8 +408,8 @@ #define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x13 0x000 #define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x15 0x000 -#define MX25_PAD_UART2_CTS__FEC_RX_ER 0x18c 0x384 0x518 0x12 0x002 #define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x10 0x000 +#define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x12 0x002 #define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x15 0x000 #define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000 @@ -392,11 +431,11 @@ #define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x15 0x000 #define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x10 0x000 -#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x15 0x002 +#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x12 0x002 #define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x15 0x000 #define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x10 0x000 -#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x10 0x002 +#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x12 0x002 #define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x15 0x000 #define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x10 0x000 @@ -410,7 +449,7 @@ #define MX25_PAD_KPP_ROW2__GPIO_2_31 0x1b0 0x3a8 0x000 0x15 0x000 #define MX25_PAD_KPP_ROW3__KPP_ROW3 0x1b4 0x3ac 0x000 0x10 0x000 -#define MX25_PAD_KPP_ROW3__CSI_LD1 0x1b4 0x3ac 0x48c 0x13 0x002 +#define MX25_PAD_KPP_ROW3__CSI_D1 0x1b4 0x3ac 0x48c 0x13 0x002 #define MX25_PAD_KPP_ROW3__GPIO_3_0 0x1b4 0x3ac 0x000 0x15 0x000 #define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x10 0x000 @@ -455,9 +494,18 @@ #define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x15 0x000 #define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x10 0x000 +/* + * According to the i.MX25 Reference manual (IMX25RM, Rev. 2, + * 01/2011) this is CAN1_TX but that's wrong. + */ +#define MX25_PAD_FEC_RDATA1__CAN2_TX 0x1e0 0x3d8 0x000 0x14 0x000 #define MX25_PAD_FEC_RDATA1__GPIO_3_11 0x1e0 0x3d8 0x000 0x15 0x000 #define MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x1e4 0x3dc 0x000 0x10 0x000 +/* + * According to the i.MX25 Reference manual (IMX25RM, Rev. 2, + * 01/2011) this is CAN1_RX but that's wrong. + */ #define MX25_PAD_FEC_RX_DV__CAN2_RX 0x1e4 0x3dc 0x484 0x14 0x000 #define MX25_PAD_FEC_RX_DV__GPIO_3_12 0x1e4 0x3dc 0x000 0x15 0x000 @@ -471,30 +519,34 @@ #define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x10 0x000 #define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x15 0x000 -#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000 - #define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x10 0x000 #define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x16 0x000 #define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x12 0x000 #define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x10 0x000 -#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001 #define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x12 0x001 +#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001 #define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x10 0x000 +#define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x11 0x000 +#define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x12 0x001 +#define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x13 0x001 #define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x16 0x000 #define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x10 0x000 +#define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x12 0x001 #define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x16 0x001 #define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x10 0x000 #define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x11 0x002 #define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x12 0x000 #define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x14 0x000 +#define MX25_PAD_GPIO_E__UART4_RXD 0x204 0x400 0x570 0x16 0x002 #define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x10 0x000 #define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x12 0x000 #define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x14 0x000 +#define MX25_PAD_GPIO_F__UART4_TXD 0x208 0x404 0x000 0x16 0x000 #define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x10 0x000 #define MX25_PAD_EXT_ARMCLK__GPIO_3_15 0x20c 0x000 0x000 0x15 0x000 @@ -505,6 +557,7 @@ #define MX25_PAD_VSTBY_REQ__VSTBY_REQ 0x214 0x408 0x000 0x10 0x000 #define MX25_PAD_VSTBY_REQ__AUD7_TXFS 0x214 0x408 0x000 0x14 0x000 #define MX25_PAD_VSTBY_REQ__GPIO_3_17 0x214 0x408 0x000 0x15 0x000 + #define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x10 0x000 #define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x15 0x000 @@ -517,6 +570,7 @@ #define MX25_PAD_BOOT_MODE0__BOOT_MODE0 0x224 0x000 0x000 0x00 0x000 #define MX25_PAD_BOOT_MODE0__GPIO_4_30 0x224 0x000 0x000 0x05 0x000 + #define MX25_PAD_BOOT_MODE1__BOOT_MODE1 0x228 0x000 0x000 0x00 0x000 #define MX25_PAD_BOOT_MODE1__GPIO_4_31 0x228 0x000 0x000 0x05 0x000 diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 4b063b68db44..6951b66d1ab7 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -488,6 +488,7 @@ interrupts = <54>; clocks = <&clks IMX27_CLK_USB_IPG_GATE>; fsl,usbmisc = <&usbmisc 1>; + dr_mode = "host"; status = "disabled"; }; @@ -497,6 +498,7 @@ interrupts = <55>; clocks = <&clks IMX27_CLK_USB_IPG_GATE>; fsl,usbmisc = <&usbmisc 2>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts index 7198fe3798c6..070e59cbdd8b 100644 --- a/arch/arm/boot/dts/imx28-apf28.dts +++ b/arch/arm/boot/dts/imx28-apf28.dts @@ -78,7 +78,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio4 13 0>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 1f38a052ad4b..7ac4f1af16ac 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -110,6 +110,13 @@ }; }; }; + + can0: can@80032000 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + xceiver-supply = <®_can0_vcc>; + status = "okay"; + }; }; apbx@80040000 { @@ -130,6 +137,13 @@ status = "okay"; }; + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + fsl,uart-has-rtscts; + status = "okay"; + }; + usbphy0: usbphy@8007c000 { status = "okay"; }; @@ -143,7 +157,8 @@ ahb@80080000 { usb0: usb@80080000 { pinctrl-names = "default"; - pinctrl-0 = <&usb0_otg_apf28dev>; + pinctrl-0 = <&usb0_otg_apf28dev + &usb0_id_pins_b>; vbus-supply = <®_usb0_vbus>; status = "okay"; }; @@ -156,7 +171,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac1_pins_a>; - phy-reset-gpios = <&gpio0 23 0>; + phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; }; }; @@ -175,6 +190,14 @@ gpio = <&gpio1 23 1>; enable-active-high; }; + + reg_can0_vcc: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "can0_vcc"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; }; leds { @@ -200,8 +223,9 @@ user-button { label = "User button"; - gpios = <&gpio0 17 0>; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; linux,code = <0x100>; + gpio-key,wakeup; }; }; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 47f68ac868d4..25e25f82fbae 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -829,6 +829,19 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + spi3_pins_b: spi3@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_SSP3_SCK__SSP3_SCK + MX28_PAD_SSP3_MOSI__SSP3_CMD + MX28_PAD_SSP3_MISO__SSP3_D0 + MX28_PAD_SSP3_SS0__SSP3_D3 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + usb0_pins_a: usb0@0 { reg = <0>; fsl,pinmux-ids = < @@ -1197,6 +1210,7 @@ interrupts = <92>; clocks = <&clks 61>; fsl,usbphy = <&usbphy1>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 6932928f3b45..b6478e97d6a7 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -318,6 +318,7 @@ clocks = <&clks 73>; fsl,usbmisc = <&usbmisc 1>; fsl,usbphy = <&usbphy1>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 620b0f030591..e2457138311f 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -197,6 +197,7 @@ reg = <0x53f80200 0x0200>; interrupts = <14>; clocks = <&clks IMX5_CLK_USB_PHY2_GATE>; + dr_mode = "host"; status = "disabled"; }; @@ -205,6 +206,7 @@ reg = <0x53f80400 0x0200>; interrupts = <16>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; + dr_mode = "host"; status = "disabled"; }; @@ -213,6 +215,7 @@ reg = <0x53f80600 0x0200>; interrupts = <17>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index c0116cffc513..f46fe9bf0bcb 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -265,6 +265,7 @@ interrupts = <14>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 1>; + dr_mode = "host"; status = "disabled"; }; @@ -274,6 +275,7 @@ interrupts = <16>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 2>; + dr_mode = "host"; status = "disabled"; }; @@ -283,6 +285,7 @@ interrupts = <17>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 3>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index ff4fa7ecacd8..c3e3ca9362fb 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -309,6 +309,7 @@ clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 1>; fsl,usbphy = <&usbphy1>; + dr_mode = "host"; status = "disabled"; }; @@ -318,6 +319,7 @@ interrupts = <16>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 2>; + dr_mode = "host"; status = "disabled"; }; @@ -327,6 +329,7 @@ interrupts = <17>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 3>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index 9cd06e5e59f0..d4c4a22db488 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -83,3 +83,7 @@ &ipu1_di0_disp0 { remote-endpoint = <&display0_in>; }; + +&pwm1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts index b413e24288dc..15203f0e9725 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts @@ -72,3 +72,7 @@ &ipu1_di0_disp0 { remote-endpoint = <&display0_in>; }; + +&pwm3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/imx6dl-cubox-i.dts index 58aa8f2b0f26..e0b7fe8e18f8 100644 --- a/arch/arm/boot/dts/imx6dl-cubox-i.dts +++ b/arch/arm/boot/dts/imx6dl-cubox-i.dts @@ -1,5 +1,43 @@ /* * Copyright (C) 2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 44a0e6736bb1..7369d2d7da3e 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -1,6 +1,44 @@ /* * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) * Based on dt work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts index 9efd8b0c8011..670bd8c4c847 100644 --- a/arch/arm/boot/dts/imx6q-cubox-i.dts +++ b/arch/arm/boot/dts/imx6q-cubox-i.dts @@ -1,5 +1,43 @@ /* * Copyright (C) 2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts index c2bf8476ce45..0f6044553a24 100644 --- a/arch/arm/boot/dts/imx6q-hummingboard.dts +++ b/arch/arm/boot/dts/imx6q-hummingboard.dts @@ -1,6 +1,44 @@ /* * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) * Based on dt work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 93ec79bb6b35..399103b8e2c9 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -294,19 +294,21 @@ }; &mipi_dsi { - port@2 { - reg = <2>; + ports { + port@2 { + reg = <2>; - mipi_mux_2: endpoint { - remote-endpoint = <&ipu2_di0_mipi>; + mipi_mux_2: endpoint { + remote-endpoint = <&ipu2_di0_mipi>; + }; }; - }; - port@3 { - reg = <3>; + port@3 { + reg = <3>; - mipi_mux_3: endpoint { - remote-endpoint = <&ipu2_di1_mipi>; + mipi_mux_3: endpoint { + remote-endpoint = <&ipu2_di1_mipi>; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 6a524ca011e7..d033bb182060 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -1,8 +1,48 @@ /* * Copyright (C) 2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "imx6qdl-microsom.dtsi" #include "imx6qdl-microsom-ar8035.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> / { ir_recv: ir-receiver { @@ -66,6 +106,18 @@ spdif-controller = <&spdif>; spdif-out; }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pinctrl_gpio_key>; + pinctrl-names = "default"; + + button_0 { + label = "Button 0"; + gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + }; }; &hdmi { @@ -170,9 +222,19 @@ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 >; }; + + pinctrl_gpio_key: gpio-key { + fsl,pins = < + MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x17059 + >; + }; }; }; +&pwm1 { + status = "okay"; +}; + &spdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_spdif>; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 62841e85a91e..151a3db2aea9 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -1,5 +1,43 @@ /* * Copyright (C) 2013,2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "imx6qdl-microsom.dtsi" #include "imx6qdl-microsom-ar8035.dtsi" @@ -50,6 +88,19 @@ }; }; + sound-sgtl5000 { + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + compatible = "fsl,imx-audio-sgtl5000"; + model = "On-board Codec"; + mux-ext-port = <5>; + mux-int-port = <1>; + ssi-controller = <&ssi1>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "On-board SPDIF"; @@ -59,6 +110,10 @@ }; }; +&audmux { + status = "okay"; +}; + &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_flexcan1>; @@ -75,16 +130,24 @@ &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_i2c1>; - - /* - * Not fitted on Carrier-1 board... yet status = "okay"; + /* Pro baseboard model */ rtc: pcf8523@68 { compatible = "nxp,pcf8523"; reg = <0x68>; }; - */ + + /* Pro baseboard model */ + sgtl5000: sgtl5000@0a { + clocks = <&clks IMX6QDL_CLK_CKO>; + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; }; &i2c2 { @@ -129,6 +192,20 @@ >; }; + pinctrl_hummingboard_pwm1: pwm1grp { + fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>; + }; + + pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + pinctrl_hummingboard_spdif: hummingboard-spdif { fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; @@ -168,12 +245,28 @@ }; }; +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + status = "okay"; +}; + &spdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_spdif>; status = "okay"; }; +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + &usbh1 { disable-over-current; vbus-supply = <®_usbh1_vbus>; diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index db9f45b2c573..4a1820309cdb 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -3,6 +3,44 @@ * * This describes the hookup for an AR8035 to the iMX6 on the SolidRun * MicroSOM. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ &fec { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index 79eac6849d4c..349f82be816e 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -1,5 +1,43 @@ /* * Copyright (C) 2013,2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ &iomuxc { diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 009abd69385d..46b2fed7c319 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -182,6 +182,34 @@ }; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + status = "okay"; + + max7310_a: gpio@30 { + compatible = "maxim,max7310"; + reg = <0x30>; + gpio-controller; + #gpio-cells = <2>; + }; + + max7310_b: gpio@32 { + compatible = "maxim,max7310"; + reg = <0x32>; + gpio-controller; + #gpio-cells = <2>; + }; + + max7310_c: gpio@34 { + compatible = "maxim,max7310"; + reg = <0x34>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; @@ -265,6 +293,13 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + pinctrl_pwm3: pwm1grp { fsl,pins = < MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index f1cd2147421d..a626e6dd8022 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -35,6 +35,7 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio3 22 0>; enable-active-high; + vin-supply = <&swbst_reg>; }; reg_usb_h1_vbus: regulator@1 { @@ -45,6 +46,7 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio1 29 0>; enable-active-high; + vin-supply = <&swbst_reg>; }; reg_audio: regulator@2 { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index d6c69ec44314..f74a8ded515f 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -53,6 +53,7 @@ interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; + interrupt-parent = <&intc>; }; clocks { @@ -82,7 +83,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - interrupt-parent = <&intc>; + interrupt-parent = <&gpc>; ranges; dma_apbh: dma-apbh@00110000 { @@ -122,6 +123,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; interrupts = <1 13 0xf01>; + interrupt-parent = <&intc>; clocks = <&clks IMX6QDL_CLK_TWD>; }; @@ -357,6 +359,7 @@ clocks = <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_PWM1>; clock-names = "ipg", "per"; + status = "disabled"; }; pwm2: pwm@02084000 { @@ -367,6 +370,7 @@ clocks = <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_PWM2>; clock-names = "ipg", "per"; + status = "disabled"; }; pwm3: pwm@02088000 { @@ -377,6 +381,7 @@ clocks = <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_PWM3>; clock-names = "ipg", "per"; + status = "disabled"; }; pwm4: pwm@0208c000 { @@ -387,6 +392,7 @@ clocks = <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_PWM4>; clock-names = "ipg", "per"; + status = "disabled"; }; can1: flexcan@02090000 { @@ -598,7 +604,7 @@ regulator-name = "vddpu"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1450000>; - regulator-always-on; + regulator-enable-ramp-delay = <150>; anatop-reg-offset = <0x140>; anatop-vol-bit-shift = <9>; anatop-vol-bit-width = <5>; @@ -658,7 +664,7 @@ #size-cells = <1>; ranges = <0 0x020cc000 0x4000>; - snvs-rtc-lp@34 { + snvs_rtc: snvs-rtc-lp@34 { compatible = "fsl,sec-v4.0-mon-rtc-lp"; reg = <0x34 0x58>; interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>, @@ -693,8 +699,19 @@ gpc: gpc@020dc000 { compatible = "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>, <0 90 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + pu-supply = <®_pu>; + clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, + <&clks IMX6QDL_CLK_GPU3D_SHADER>, + <&clks IMX6QDL_CLK_GPU2D_CORE>, + <&clks IMX6QDL_CLK_GPU2D_AXI>, + <&clks IMX6QDL_CLK_OPENVG_AXI>, + <&clks IMX6QDL_CLK_VPU_AXI>; + #power-domain-cells = <1>; }; gpr: iomuxc-gpr@020e0000 { @@ -845,6 +862,7 @@ clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbphy = <&usbphy2>; fsl,usbmisc = <&usbmisc 1>; + dr_mode = "host"; status = "disabled"; }; @@ -854,6 +872,7 @@ interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbmisc = <&usbmisc 2>; + dr_mode = "host"; status = "disabled"; }; @@ -863,6 +882,7 @@ interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbmisc = <&usbmisc 3>; + dr_mode = "host"; status = "disabled"; }; @@ -1022,19 +1042,24 @@ reg = <0x021e0000 0x4000>; status = "disabled"; - port@0 { - reg = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; - mipi_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_mipi>; + mipi_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_mipi>; + }; }; - }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - mipi_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_mipi>; + mipi_mux_1: endpoint { + remote-endpoint = <&ipu1_di1_mipi>; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index fda4932faefd..945887d3fdb3 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -52,6 +52,7 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio4 0 0>; enable-active-high; + vin-supply = <&swbst_reg>; }; reg_usb_otg2_vbus: regulator@1 { @@ -62,6 +63,7 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio4 2 0>; enable-active-high; + vin-supply = <&swbst_reg>; }; reg_aud3v: regulator@2 { diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts new file mode 100644 index 000000000000..64f7decf1fdc --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-warp.dts @@ -0,0 +1,262 @@ +/* + * Copyright 2014, 2015 O.S. Systems Software LTDA. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx6sl.dtsi" + +/ { + model = "WaRP Board"; + compatible = "warp,imx6sl-warp", "fsl,imx6sl"; + + memory { + reg = <0x80000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 0>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 0>; + enable-active-high; + }; + + reg_1p8v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + usdhc3_pwrseq: usdhc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ + <&gpio3 25 GPIO_ACTIVE_LOW>, /* BT_REG_ON */ + <&gpio4 4 GPIO_ACTIVE_LOW>, /* BT_WAKE */ + <&gpio4 6 GPIO_ACTIVE_LOW>; /* BT_RST_N */ + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <4>; + non-removable; + keep-power-in-suspend; + enable-sdio-wakeup; + mmc-pwrseq = <&usdhc3_pwrseq>; + status = "okay"; +}; + +&iomuxc { + imx6sl-warp { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x41b0b1 + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x41b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6SL_PAD_EPDC_D12__UART2_RX_DATA 0x41b0b1 + MX6SL_PAD_EPDC_D13__UART2_TX_DATA 0x41b0b1 + MX6SL_PAD_EPDC_D14__UART2_RTS_B 0x4130B1 + MX6SL_PAD_EPDC_D15__UART2_CTS_B 0x4130B1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6SL_PAD_AUD_RXC__UART3_RX_DATA 0x41b0b1 + MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x41b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x417059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x410059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x417059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x417059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x417059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x417059 + MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x417059 + MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x417059 + MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x417059 + MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x417059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170b9 + MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170b9 + MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170b9 + MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170b9 + MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170f9 + MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170f9 + MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170f9 + MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170f9 + MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x417059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x410059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x417059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x417059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x417059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x417059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170b9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100b9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x4170b9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x4170b9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x4170b9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x4170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170f9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100f9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x4170f9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x4170f9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x4170f9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x4170f9 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 36ab8e054cee..a78e715e3982 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -72,6 +72,7 @@ interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; + interrupt-parent = <&intc>; }; clocks { @@ -95,7 +96,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - interrupt-parent = <&intc>; + interrupt-parent = <&gpc>; ranges; ocram: sram@00900000 { @@ -568,7 +569,7 @@ #size-cells = <1>; ranges = <0 0x020cc000 0x4000>; - snvs-rtc-lp@34 { + snvs_rtc: snvs-rtc-lp@34 { compatible = "fsl,sec-v4.0-mon-rtc-lp"; reg = <0x34 0x58>; interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>, @@ -603,7 +604,14 @@ gpc: gpc@020dc000 { compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + pu-supply = <®_pu>; + clocks = <&clks IMX6SL_CLK_GPU2D_OVG>, + <&clks IMX6SL_CLK_GPU2D_PODF>; + #power-domain-cells = <1>; }; gpr: iomuxc-gpr@020e0000 { @@ -699,6 +707,7 @@ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_USBOH3>; fsl,usbmisc = <&usbmisc 2>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts new file mode 100644 index 000000000000..c76b87cba275 --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -0,0 +1,143 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "imx6sx-sdb.dtsi" + +/ { + model = "Freescale i.MX6 SoloX SDB RevA Board"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&qspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi2>; + status = "okay"; + + flash0: s25fl128s@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl128s"; + spi-max-frequency = <66000000>; + }; + + flash1: s25fl128s@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl128s"; + spi-max-frequency = <66000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 32f07d6b4042..0bfc4e7865b2 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -1,197 +1,40 @@ /* - * Copyright (C) 2014 Freescale Semiconductor, Inc. + * Copyright (C) 2015 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include "imx6sx.dtsi" +#include "imx6sx-sdb.dtsi" / { - model = "Freescale i.MX6 SoloX SDB Board"; - compatible = "fsl,imx6sx-sdb", "fsl,imx6sx"; - - chosen { - stdout-path = &uart1; - }; - - memory { - reg = <0x80000000 0x40000000>; - }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm3 0 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - volume-up { - label = "Volume Up"; - gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - }; - - volume-down { - label = "Volume Down"; - gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEDOWN>; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vcc_sd3: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_vcc_sd3>; - regulator-name = "VCC_SD3"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usb_otg1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg1>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usb_otg2_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg2>; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_psu_5v: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "PSU-5V0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_lcd_3v3: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "lcd-3v3"; - gpio = <&gpio3 27 0>; - enable-active-high; - }; - - reg_peri_3v3: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_peri_3v3>; - regulator-name = "peri_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - reg_enet_3v3: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_3v3>; - regulator-name = "enet_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; - }; - }; - - sound { - compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962"; - model = "wm8962-audio"; - ssi-controller = <&ssi2>; - audio-codec = <&codec>; - audio-routing = - "Headphone Jack", "HPOUTL", - "Headphone Jack", "HPOUTR", - "Ext Spk", "SPKOUTL", - "Ext Spk", "SPKOUTR", - "AMIC", "MICBIAS", - "IN3R", "AMIC"; - mux-int-port = <2>; - mux-ext-port = <6>; - }; -}; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux>; - status = "okay"; + model = "Freescale i.MX6 SoloX SDB RevB Board"; }; -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet1>; - phy-supply = <®_enet_3v3>; - phy-mode = "rgmii"; - phy-handle = <ðphy1>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@1 { - reg = <1>; - }; - - ethphy2: ethernet-phy@2 { - reg = <2>; - }; - }; +&cpu0 { + operating-points = < + /* kHz uV */ + 996000 1250000 + 792000 1175000 + 396000 1175000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC uV */ + 996000 1250000 + 792000 1175000 + 396000 1175000 + >; }; -&fec2 { +&i2c1 { + clock-frequency = <100000>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet2>; - phy-mode = "rgmii"; - phy-handle = <ðphy2>; + pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; pmic: pfuze100@08 { - compatible = "fsl,pfuze100"; + compatible = "fsl,pfuze200"; reg = <0x08>; regulators { @@ -203,14 +46,6 @@ regulator-ramp-delay = <6250>; }; - sw1c_reg: sw1c { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - sw2_reg: sw2 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; @@ -232,11 +67,6 @@ regulator-always-on; }; - sw4_reg: sw4 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - }; - swbst_reg: swbst { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5150000>; @@ -292,401 +122,24 @@ }; }; -&i2c4 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; - status = "okay"; - - codec: wm8962@1a { - compatible = "wlf,wm8962"; - reg = <0x1a>; - clocks = <&clks IMX6SX_CLK_AUDIO>; - DCVDD-supply = <&vgen4_reg>; - DBVDD-supply = <&vgen4_reg>; - AVDD-supply = <&vgen4_reg>; - CPVDD-supply = <&vgen4_reg>; - MICVDD-supply = <&vgen3_reg>; - PLLVDD-supply = <&vgen4_reg>; - SPKVDD1-supply = <®_psu_5v>; - SPKVDD2-supply = <®_psu_5v>; - }; -}; - -&lcdif1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd>; - lcd-supply = <®_lcd_3v3>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <16>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33500000>; - hactive = <800>; - vactive = <480>; - hback-porch = <89>; - hfront-porch = <164>; - vback-porch = <23>; - vfront-porch = <10>; - hsync-len = <10>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; -}; - -&pwm3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm3>; - status = "okay"; -}; - -&snvs_poweroff { - status = "okay"; -}; - &qspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_qspi2>; status = "okay"; - flash0: s25fl128s@0 { - reg = <0>; + flash0: n25q256a@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl128s"; - spi-max-frequency = <66000000>; + compatible = "micron,n25q256a"; + spi-max-frequency = <29000000>; + reg = <0>; }; - flash1: s25fl128s@1 { - reg = <1>; + flash1: n25q256a@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl128s"; - spi-max-frequency = <66000000>; - }; -}; - -&ssi2 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart5 { /* for bluetooth */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - fsl,uart-has-rtscts; - status = "okay"; -}; - -&usbotg1 { - vbus-supply = <®_usb_otg1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg1_id>; - status = "okay"; -}; - -&usbotg2 { - vbus-supply = <®_usb_otg2_vbus>; - dr_mode = "host"; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - non-removable; - no-1-8-v; - keep-power-in-suspend; - enable-sdio-wakeup; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - bus-width = <8>; - cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; - wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; - keep-power-in-suspend; - enable-sdio-wakeup; - vmmc-supply = <&vcc_sd3>; - status = "okay"; -}; - -&usdhc4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc4>; - cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>; - wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&iomuxc { - imx6x-sdb { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0 - MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0 - MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0 - MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0 - MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 - >; - }; - - pinctrl_enet1: enet1grp { - fsl,pins = < - MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1 - MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1 - MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1 - MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1 - MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1 - MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1 - MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1 - MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1 - MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081 - MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081 - MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081 - MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 - MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 - MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 - MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91 - >; - }; - - pinctrl_enet_3v3: enet3v3grp { - fsl,pins = < - MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000 - >; - }; - - pinctrl_enet2: enet2grp { - fsl,pins = < - MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9 - MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1 - MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1 - MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1 - MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1 - MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1 - MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081 - MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081 - MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081 - MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081 - MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081 - MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 - >; - }; - - pinctrl_gpio_keys: gpio_keysgrp { - fsl,pins = < - MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059 - MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 - MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 - >; - }; - - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1 - MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1 - >; - }; - - pinctrl_lcd: lcdgrp { - fsl,pins = < - MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 - MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 - MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 - MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 - MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 - MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 - MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 - MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 - MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 - MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 - MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 - MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 - MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 - MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 - MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 - MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 - MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 - MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 - MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 - MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 - MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 - MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 - MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 - MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 - MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 - MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 - MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 - MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 - MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 - >; - }; - - pinctrl_peri_3v3: peri3v3grp { - fsl,pins = < - MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000 - >; - }; - - pinctrl_pwm3: pwm3grp-1 { - fsl,pins = < - MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0 - >; - }; - - pinctrl_qspi2: qspi2grp { - fsl,pins = < - MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1 - MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1 - MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1 - MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1 - MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1 - MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1 - MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1 - MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1 - MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1 - MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1 - MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1 - MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1 - >; - }; - - pinctrl_vcc_sd3: vccsd3grp { - fsl,pins = < - MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 - >; - }; - - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 - MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 - MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1 - MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1 - >; - }; - - pinctrl_usb_otg1: usbotg1grp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0 - >; - }; - - pinctrl_usb_otg1_id: usbotg1idgrp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059 - >; - }; - - pinctrl_usb_otg2: usbot2ggrp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 - MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 - MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 - MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 - MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 - MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059 - MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059 - MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059 - MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059 - MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059 - MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059 - MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059 - MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059 - MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059 - MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059 - MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */ - MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */ - >; - }; - - pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { - fsl,pins = < - MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 - MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 - MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9 - MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9 - MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9 - MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9 - MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9 - MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9 - MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9 - MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { - fsl,pins = < - MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 - MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 - MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9 - MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9 - MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9 - MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9 - MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9 - MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9 - MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9 - MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9 - >; - }; - - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 - MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 - MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 - MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 - MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 - MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 - MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */ - MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ - >; - }; + compatible = "micron,n25q256a"; + spi-max-frequency = <29000000>; + reg = <1>; }; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi new file mode 100644 index 000000000000..cef04cef3a80 --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -0,0 +1,562 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6sx.dtsi" + +/ { + model = "Freescale i.MX6 SoloX SDB Board"; + compatible = "fsl,imx6sx-sdb", "fsl,imx6sx"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x80000000 0x40000000>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + volume-up { + label = "Volume Up"; + gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vcc_sd3: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_sd3>; + regulator-name = "VCC_SD3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_psu_5v: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "PSU-5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_lcd_3v3: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-3v3"; + gpio = <&gpio3 27 0>; + enable-active-high; + }; + + reg_peri_3v3: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_peri_3v3>; + regulator-name = "peri_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_enet_3v3: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_3v3>; + regulator-name = "enet_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + }; + }; + + sound { + compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <6>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-supply = <®_enet_3v3>; + phy-mode = "rgmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rgmii"; + phy-handle = <ðphy2>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6SX_CLK_AUDIO>; + DCVDD-supply = <&vgen4_reg>; + DBVDD-supply = <&vgen4_reg>; + AVDD-supply = <&vgen4_reg>; + CPVDD-supply = <&vgen4_reg>; + MICVDD-supply = <&vgen3_reg>; + PLLVDD-supply = <&vgen4_reg>; + SPKVDD1-supply = <®_psu_5v>; + SPKVDD2-supply = <®_psu_5v>; + }; +}; + +&lcdif1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + lcd-supply = <®_lcd_3v3>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart5 { /* for bluetooth */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + enable-sdio-wakeup; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <&vcc_sd3>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&iomuxc { + imx6x-sdb { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0 + MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0 + MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0 + MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0 + MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1 + MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1 + MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1 + MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1 + MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1 + MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1 + MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1 + MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1 + MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081 + MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 + MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91 + >; + }; + + pinctrl_enet_3v3: enet3v3grp { + fsl,pins = < + MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9 + MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1 + MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1 + MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1 + MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1 + MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1 + MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081 + MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059 + MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 + MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1 + MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1 + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 + MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 + MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 + MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 + MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 + MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 + MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 + MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 + MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 + MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 + MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 + MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 + MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 + MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 + MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 + MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 + MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 + MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 + MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 + MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 + MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 + MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 + MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 + MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 + MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 + MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 + MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 + >; + }; + + pinctrl_peri_3v3: peri3v3grp { + fsl,pins = < + MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000 + >; + }; + + pinctrl_pwm3: pwm3grp-1 { + fsl,pins = < + MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0 + >; + }; + + pinctrl_qspi2: qspi2grp { + fsl,pins = < + MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1 + MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1 + MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1 + MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1 + MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1 + MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1 + MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1 + MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1 + MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1 + MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1 + MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1 + MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1 + >; + }; + + pinctrl_vcc_sd3: vccsd3grp { + fsl,pins = < + MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 + MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 + MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1 + MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usb_otg2: usbot2ggrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059 + MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */ + MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */ + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 + MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */ + MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 7a24fee1e7ae..708175d59b9c 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -88,6 +88,7 @@ interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; + interrupt-parent = <&intc>; }; clocks { @@ -131,7 +132,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - interrupt-parent = <&intc>; + interrupt-parent = <&gpc>; ranges; pmu { @@ -666,7 +667,7 @@ #size-cells = <1>; ranges = <0 0x020cc000 0x4000>; - snvs-rtc-lp@34 { + snvs_rtc: snvs-rtc-lp@34 { compatible = "fsl,sec-v4.0-mon-rtc-lp"; reg = <0x34 0x58>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; @@ -700,7 +701,10 @@ gpc: gpc@020dc000 { compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; }; iomuxc: iomuxc@020e0000 { @@ -763,6 +767,7 @@ fsl,usbmisc = <&usbmisc 2>; phy_type = "hsic"; fsl,anatop = <&anatop>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/kirkwood-nas2big.dts new file mode 100644 index 000000000000..7427ec50b829 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nas2big.dts @@ -0,0 +1,143 @@ +/* + * Device Tree file for LaCie 2Big NAS + * + * Copyright (C) 2015 Seagate + * + * Author: Simon Guinot <simon.guinot@sequanux.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +/dts-v1/; + +#include "kirkwood-netxbig.dtsi" + +/ { + model = "LaCie 2Big NAS"; + compatible = "lacie,nas2big", "lacie,netxbig", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + rtc@10300 { + /* The on-chip RTC is not powered (no supercap). */ + status = "disabled"; + }; + spi@10600 { + /* + * A NAND flash is used instead of an SPI flash for + * the other netxbig-compatible boards. + */ + status = "disabled"; + }; + }; + + fan { + /* + * An I2C fan controller (GMT G762) is used but alarm is + * wired to a separate GPIO. + */ + compatible = "gpio-fan"; + alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + }; + + regulators: regulators { + status = "okay"; + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "hdd1power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; + }; + clocks { + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; + + /* + * An external I2C RTC (Dallas DS1337S+) is used. This allows + * to power-up the board on an RTC alarm. The external RTC can + * be kept powered, even when the SoC is off. + */ + rtc@68 { + compatible = "dallas,ds1307"; + reg = <0x68>; + interrupts = <43>; + }; + g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; + }; +}; + +&nand { + chip-delay = <50>; + status = "okay"; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "uImage"; + reg = <0x100000 0x1000000>; + }; + + partition@1100000 { + label = "root"; + reg = <0x1100000 0x8000000>; + }; + + partition@9100000 { + label = "unused"; + reg = <0x9100000 0x6f00000>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-net2big.dts b/arch/arm/boot/dts/kirkwood-net2big.dts index 53dc37a3b687..13a44773b6df 100644 --- a/arch/arm/boot/dts/kirkwood-net2big.dts +++ b/arch/arm/boot/dts/kirkwood-net2big.dts @@ -27,6 +27,11 @@ device_type = "memory"; reg = <0x00000000 0x10000000>; }; + + fan { + compatible = "gpio-fan"; + alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + }; }; ®ulators { diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index b67ede515bcd..548441384d2a 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -150,5 +150,25 @@ interrupts = <0 15 1>; status = "disabled"; }; + + spifc: spi@c1108c80 { + compatible = "amlogic,meson6-spifc"; + reg = <0xc1108c80 0x80>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk81>; + status = "disabled"; + }; + + ethmac: ethernet@c9410000 { + compatible = "amlogic,meson6-dwmac", "snps,dwmac"; + reg = <0xc9410000 0x10000 + 0xc1108108 0x4>; + interrupts = <0 8 1>; + interrupt-names = "macirq"; + clocks = <&clk81>; + clock-names = "stmmaceth"; + status = "disabled"; + }; }; }; /* end of / */ diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts index d7d351a68944..1237faa63ce6 100644 --- a/arch/arm/boot/dts/meson6-atv1200.dts +++ b/arch/arm/boot/dts/meson6-atv1200.dts @@ -64,3 +64,7 @@ &uart_AO { status = "okay"; }; + +ðmac { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts new file mode 100644 index 000000000000..4f536bb1f002 --- /dev/null +++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts @@ -0,0 +1,128 @@ +/* + * Copyright 2014 Beniamino Galvani <b.galvani@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include "meson8.dtsi" + +/ { + model = "MINIX NEO-X8"; + compatible = "minix,neo-x8", "amlogic,meson8"; + + aliases { + serial0 = &uart_AO; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + blue { + label = "x8:blue:power"; + gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&i2c_AO { + status = "okay"; + pinctrl-0 = <&i2c_ao_pins>; + pinctrl-names = "default"; + + pmic@32 { + compatible = "ricoh,rn5t618"; + reg = <0x32>; + + regulators { + }; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&spifc { + status = "okay"; + pinctrl-0 = <&spi_nor_pins>; + pinctrl-names = "default"; + + spi-flash@0 { + compatible = "mxicy,mx25l1606e"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <30000000>; + + partition@0 { + label = "boot"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "env"; + reg = <0x100000 0x10000>; + }; + }; +}; + +&ir_receiver { + status = "okay"; + pinctrl-0 = <&ir_recv_pins>; + pinctrl-names = "default"; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_pins>; + pnictrl-names = "default"; +}; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 1f442a7fe03b..a2ddcb8c545a 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -43,6 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/gpio/meson8-gpio.h> /include/ "meson.dtsi" / { @@ -89,4 +90,71 @@ compatible = "fixed-clock"; clock-frequency = <141666666>; }; + + pinctrl: pinctrl@c1109880 { + compatible = "amlogic,meson8-pinctrl"; + reg = <0xc1109880 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio: banks@c11080b0 { + reg = <0xc11080b0 0x28>, + <0xc11080e8 0x18>, + <0xc1108120 0x18>, + <0xc1108030 0x30>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_ao: ao-bank@c1108030 { + reg = <0xc8100014 0x4>, + <0xc810002c 0x4>, + <0xc8100024 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; + }; + + i2c_ao_pins: i2c_mst_ao { + mux { + groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao"; + function = "i2c_mst_ao"; + }; + }; + + spi_nor_pins: nor { + mux { + groups = "nor_d", "nor_q", "nor_c", "nor_cs"; + function = "nor"; + }; + }; + + ir_recv_pins: remote { + mux { + groups = "remote_input"; + function = "remote"; + }; + }; + + eth_pins: ethernet { + mux { + groups = "eth_tx_clk_50m", "eth_tx_en", + "eth_txd1", "eth_txd0", + "eth_rx_clk_in", "eth_rx_dv", + "eth_rxd1", "eth_rxd0", "eth_mdio", + "eth_mdc"; + function = "ethernet"; + }; + }; + }; + }; /* end of / */ diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi index 106b61b10030..88b3cb128698 100644 --- a/arch/arm/boot/dts/mt6589.dtsi +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -138,5 +138,10 @@ clocks = <&uart_clk>; status = "disabled"; }; + + wdt: watchdog@010000000 { + compatible = "mediatek,mt6589-wdt"; + reg = <0x10000000 0x44>; + }; }; }; diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi index 9565199bce7a..4907c5085d4b 100644 --- a/arch/arm/boot/dts/nspire-classic.dtsi +++ b/arch/arm/boot/dts/nspire-classic.dtsi @@ -51,6 +51,11 @@ compatible = "lsi,nspire-classic-ahb-divider"; }; + +&vbus_reg { + gpio = <&gpio 5 0>; +}; + / { memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts index 375b924f60d8..08e0b81b3385 100644 --- a/arch/arm/boot/dts/nspire-cx.dts +++ b/arch/arm/boot/dts/nspire-cx.dts @@ -69,6 +69,10 @@ 0x0709001d 0x070a0033 >; }; +&vbus_reg { + gpio = <&gpio 2 0>; +}; + / { model = "TI-NSPIRE CX"; compatible = "ti,nspire-cx"; diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi index a22ffe633b49..390c91aea16d 100644 --- a/arch/arm/boot/dts/nspire.dtsi +++ b/arch/arm/boot/dts/nspire.dtsi @@ -54,6 +54,20 @@ clocks = <&ahb_clk>; }; + usb_phy: usb_phy { + compatible = "usb-nop-xceiv"; + }; + + vbus_reg: vbus_reg { + compatible = "regulator-fixed"; + + regulator-name = "USB VBUS output"; + regulator-type = "voltage"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -65,8 +79,12 @@ }; usb0: usb@B0000000 { + compatible = "lsi,zevio-usb"; reg = <0xB0000000 0x1000>; interrupts = <8>; + + usb-phy = <&usb_phy>; + vbus-supply = <&vbus_reg>; }; usb1: usb@B4000000 { @@ -105,8 +123,11 @@ ranges; gpio: gpio@90000000 { + compatible = "lsi,zevio-gpio"; reg = <0x90000000 0x1000>; interrupts = <7>; + gpio-controller; + #gpio-cells = <2>; }; fast_timer: timer@90010000 { diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 59d1c297bb30..578fa2a54dce 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -87,8 +87,8 @@ <14>, <15>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <64>; + dma-channels = <32>; + dma-requests = <64>; }; i2c1: i2c@48070000 { diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index e2b2e93d7b61..5b9a376cc31e 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -14,47 +14,65 @@ compatible = "ti,omap2420", "ti,omap2"; ocp { - prcm: prcm@48008000 { - compatible = "ti,omap2-prcm"; - reg = <0x48008000 0x1000>; + l4: l4@48000000 { + compatible = "ti,omap2-l4", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48000000 0x100000>; - prcm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + prcm: prcm@8000 { + compatible = "ti,omap2-prcm"; + reg = <0x8000 0x1000>; - prcm_clockdomains: clockdomains { - }; - }; + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - scrm: scrm@48000000 { - compatible = "ti,omap2-scrm"; - reg = <0x48000000 0x1000>; + prcm_clockdomains: clockdomains { + }; + }; - scrm_clocks: clocks { + scm: scm@0 { + compatible = "ti,omap2-scm", "simple-bus"; + reg = <0x0 0x1000>; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges = <0 0x0 0x1000>; + + omap2420_pmx: pinmux@30 { + compatible = "ti,omap2420-padconf", + "pinctrl-single"; + reg = <0x30 0x0113>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <8>; + pinctrl-single,function-mask = <0x3f>; + }; + + scm_conf: scm_conf@270 { + compatible = "syscon"; + reg = <0x270 0x100>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + scm_clockdomains: clockdomains { + }; }; - scrm_clockdomains: clockdomains { + counter32k: counter@4000 { + compatible = "ti,omap-counter32k"; + reg = <0x4000 0x20>; + ti,hwmods = "counter_32k"; }; }; - counter32k: counter@48004000 { - compatible = "ti,omap-counter32k"; - reg = <0x48004000 0x20>; - ti,hwmods = "counter_32k"; - }; - - omap2420_pmx: pinmux@48000030 { - compatible = "ti,omap2420-padconf", "pinctrl-single"; - reg = <0x48000030 0x0113>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,register-width = <8>; - pinctrl-single,function-mask = <0x3f>; - }; - gpio1: gpio@48018000 { compatible = "ti,omap2-gpio"; reg = <0x48018000 0x200>; diff --git a/arch/arm/boot/dts/omap2430-clocks.dtsi b/arch/arm/boot/dts/omap2430-clocks.dtsi index 805f75df1cf2..93fed68839b9 100644 --- a/arch/arm/boot/dts/omap2430-clocks.dtsi +++ b/arch/arm/boot/dts/omap2430-clocks.dtsi @@ -8,12 +8,12 @@ * published by the Free Software Foundation. */ -&scrm_clocks { +&scm_clocks { mcbsp3_mux_fck: mcbsp3_mux_fck { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; - reg = <0x02e8>; + reg = <0x78>; }; mcbsp3_fck: mcbsp3_fck { @@ -27,7 +27,7 @@ compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; ti,bit-shift = <2>; - reg = <0x02e8>; + reg = <0x78>; }; mcbsp4_fck: mcbsp4_fck { @@ -41,7 +41,7 @@ compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; ti,bit-shift = <4>; - reg = <0x02e8>; + reg = <0x78>; }; mcbsp5_fck: mcbsp5_fck { diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 0dc8de2782b1..11a7963be003 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -14,60 +14,73 @@ compatible = "ti,omap2430", "ti,omap2"; ocp { - prcm: prcm@49006000 { - compatible = "ti,omap2-prcm"; - reg = <0x49006000 0x1000>; + l4_wkup: l4_wkup@49000000 { + compatible = "ti,omap2-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x49000000 0x31000>; - prcm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + prcm: prcm@6000 { + compatible = "ti,omap2-prcm"; + reg = <0x6000 0x1000>; - prcm_clockdomains: clockdomains { - }; - }; - - scrm: scrm@49002000 { - compatible = "ti,omap2-scrm"; - reg = <0x49002000 0x1000>; + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; + prcm_clockdomains: clockdomains { + }; }; - scrm_clockdomains: clockdomains { + scm: scm@2000 { + compatible = "ti,omap2-scm", "simple-bus"; + reg = <0x2000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x1000>; + + omap2430_pmx: pinmux@30 { + compatible = "ti,omap2430-padconf", + "pinctrl-single"; + reg = <0x30 0x0154>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <8>; + pinctrl-single,function-mask = <0x3f>; + }; + + scm_conf: scm_conf@270 { + compatible = "syscon"; + reg = <0x270 0x240>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0x230 0x4>; + syscon = <&scm_conf>; + pbias_mmc_reg: pbias_mmc_omap2430 { + regulator-name = "pbias_mmc_omap2430"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; + + scm_clockdomains: clockdomains { + }; }; - }; - - counter32k: counter@49020000 { - compatible = "ti,omap-counter32k"; - reg = <0x49020000 0x20>; - ti,hwmods = "counter_32k"; - }; - - omap2430_pmx: pinmux@49002030 { - compatible = "ti,omap2430-padconf", "pinctrl-single"; - reg = <0x49002030 0x0154>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,register-width = <8>; - pinctrl-single,function-mask = <0x3f>; - }; - - omap2_scm_general: tisyscon@49002270 { - compatible = "syscon"; - reg = <0x49002270 0x240>; - }; - pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; - reg = <0x230 0x4>; - syscon = <&omap2_scm_general>; - pbias_mmc_reg: pbias_mmc_omap2430 { - regulator-name = "pbias_mmc_omap2430"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + counter32k: counter@20000 { + compatible = "ti,omap-counter32k"; + reg = <0x20000 0x20>; + ti,hwmods = "counter_32k"; }; }; diff --git a/arch/arm/boot/dts/omap24xx-clocks.dtsi b/arch/arm/boot/dts/omap24xx-clocks.dtsi index a1365ca926eb..63965b876973 100644 --- a/arch/arm/boot/dts/omap24xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap24xx-clocks.dtsi @@ -7,13 +7,13 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -&scrm_clocks { +&scm_clocks { mcbsp1_mux_fck: mcbsp1_mux_fck { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; ti,bit-shift = <2>; - reg = <0x0274>; + reg = <0x4>; }; mcbsp1_fck: mcbsp1_fck { @@ -27,7 +27,7 @@ compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; ti,bit-shift = <6>; - reg = <0x0274>; + reg = <0x4>; }; mcbsp2_fck: mcbsp2_fck { diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 25f7b0a22114..7c4dca122a91 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -60,7 +60,6 @@ ti,model = "omap3beagle"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; gpio_keys { @@ -150,7 +149,6 @@ compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0x5401b000 0x1000>; - coresight-default-sink; clocks = <&emu_src_ck>; clock-names = "apb_pclk"; port { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index c792391ef090..a5474113cd50 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -71,7 +71,6 @@ ti,model = "omap3beagle"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; gpio_keys { @@ -145,7 +144,6 @@ compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0x5401b000 0x1000>; - coresight-default-sink; clocks = <&emu_src_ck>; clock-names = "apb_pclk"; port { @@ -379,3 +377,55 @@ }; }; }; + +&gpmc { + status = "ok"; + ranges = <0 0 0x30000000 0x1000000>; /* CS0 space, 16MB */ + + /* Chip select 0 */ + nand@0,0 { + reg = <0 0 4>; /* NAND I/O window, 4 bytes */ + interrupts = <20>; + ti,nand-ecc-opt = "ham1"; + nand-bus-width = <16>; + #address-cells = <1>; + #size-cells = <1>; + + gpmc,device-width = <2>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <36>; + gpmc,cs-wr-off-ns = <36>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <24>; + gpmc,adv-wr-off-ns = <36>; + gpmc,oe-on-ns = <6>; + gpmc,oe-off-ns = <48>; + gpmc,we-on-ns = <6>; + gpmc,we-off-ns = <30>; + gpmc,rd-cycle-ns = <72>; + gpmc,wr-cycle-ns = <72>; + gpmc,access-ns = <54>; + gpmc,wr-access-ns = <30>; + + partition@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + partition@80000 { + label = "U-Boot"; + reg = <0x80000 0x1e0000>; + }; + partition@1c0000 { + label = "U-Boot Env"; + reg = <0x260000 0x20000>; + }; + partition@280000 { + label = "Kernel"; + reg = <0x280000 0x400000>; + }; + partition@780000 { + label = "Filesystem"; + reg = <0x680000 0xf980000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts index 0ab748cf7749..f5b5a1d96cd7 100644 --- a/arch/arm/boot/dts/omap3-cm-t3517.dts +++ b/arch/arm/boot/dts/omap3-cm-t3517.dts @@ -133,6 +133,16 @@ non-removable; bus-width = <4>; cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; /* gpio 145 */ + ref-clock-frequency = <38400000>; + }; }; &dss { diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index 46eadb21b5ef..2294f5b0aa10 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -73,6 +73,16 @@ non-removable; bus-width = <4>; cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */ + ref-clock-frequency = <38400000>; + }; }; &dss { diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi index d9e92b654f85..046cd7733c4f 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi @@ -16,7 +16,6 @@ ti,model = "cm-t35"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; }; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index 169037e5ff53..134d3f27a8ec 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -48,7 +48,6 @@ ti,model = "devkit8000"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; ti,audio-routing = "Ext Spk", "PREDRIVEL", "Ext Spk", "PREDRIVER", diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 127f3e7c10c4..346552b94d9f 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -106,6 +106,16 @@ non-removable; bus-width = <4>; cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 149 */ + ref-clock-frequency = <38400000>; + }; }; &twl_gpio { diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index fb3a69604ed5..b9f68817bd6e 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -46,7 +46,6 @@ ti,model = "gta04"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; spi_lcd { diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 8a63ad2286aa..d5e5cd449b16 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -22,7 +22,6 @@ compatible = "ti,omap-twl4030"; ti,model = "igep2"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; vdd33: regulator-vdd33 { diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index cc8bd0cd8cf8..72f7cdc091fb 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -42,4 +42,13 @@ vmmc-supply = <&lbep5clwmc_wlen>; bus-width = <4>; non-removable; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; /* gpio 177 */ + }; }; diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index 9326b282c94a..b899e341874a 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -64,4 +64,13 @@ vmmc-supply = <&lbep5clwmc_wlen>; bus-width = <4>; non-removable; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */ + }; }; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index e81fb651d5d0..e63133304a34 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -38,7 +38,6 @@ ti,model = "lilly-a83x"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; reg_vcc3: vcc3 { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index 9938b5dc1909..f2e213931e09 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -16,3 +16,40 @@ model = "Nokia N9"; compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3"; }; + +&i2c2 { + smia_1: camera@10 { + compatible = "nokia,smia"; + reg = <0x10>; + /* No reset gpio */ + vana-supply = <&vaux3>; + clocks = <&isp 0>; + clock-frequency = <9600000>; + nokia,nvm-size = <(16 * 64)>; + port { + smia_1_1: endpoint { + link-frequencies = /bits/ 64 <199200000 210000000 499200000>; + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&csi2a_ep>; + }; + }; + }; +}; + +&isp { + vdd-csiphy1-supply = <&vaux2>; + vdd-csiphy2-supply = <&vaux2>; + ports { + port@2 { + reg = <2>; + csi2a_ep: endpoint { + remote-endpoint = <&smia_1_1>; + clock-lanes = <2>; + data-lanes = <1 3>; + crc = <1>; + lane-polarities = <1 1 1>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 60403273f83e..a29315833ecd 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -9,13 +9,34 @@ /dts-v1/; -#include "omap34xx-hs.dtsi" +#include "omap34xx.dtsi" #include <dt-bindings/input/input.h> +/* + * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall + * for omap AES HW crypto support. When linux kernel try to access memory of AES + * blocks then kernel receive "Unhandled fault: external abort on non-linefetch" + * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no + * crash anymore) omap AES support will be disabled for all Nokia N900 devices. + * There is "unofficial" version of bootloader which enables AES in L3 firewall + * but it is not widely used and to prevent kernel crash rather AES is disabled. + * There is also no runtime detection code if AES is disabled in L3 firewall... + */ +&aes { + status = "disabled"; +}; + / { model = "Nokia N900"; compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3"; + aliases { + i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + }; + cpus { cpu@0 { cpu0-supply = <&vcc>; @@ -602,6 +623,58 @@ pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; + + lis302dl: lis3lv02d@1d { + compatible = "st,lis3lv02d"; + reg = <0x1d>; + + Vdd-supply = <&vaux1>; + Vdd_IO-supply = <&vio>; + + interrupt-parent = <&gpio6>; + interrupts = <21 20>; /* 181 and 180 */ + + /* click flags */ + st,click-single-x; + st,click-single-y; + st,click-single-z; + + /* Limits are 0.5g * value */ + st,click-threshold-x = <8>; + st,click-threshold-y = <8>; + st,click-threshold-z = <10>; + + /* Click must be longer than time limit */ + st,click-time-limit = <9>; + + /* Kind of debounce filter */ + st,click-latency = <50>; + + /* Interrupt line 2 for click detection */ + st,irq2-click; + + st,wakeup-x-hi; + st,wakeup-y-hi; + st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */ + + st,wakeup2-z-hi; + st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */ + + st,hipass1-disable; + st,hipass2-disable; + + st,axis-x = <1>; /* LIS3_DEV_X */ + st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */ + st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */ + + st,min-limit-x = <(-32)>; + st,min-limit-y = <3>; + st,min-limit-z = <3>; + + st,max-limit-x = <(-3)>; + st,max-limit-y = <32>; + st,max-limit-z = <32>; + }; }; &mmc1 { @@ -704,7 +777,7 @@ compatible = "smsc,lan91c94"; interrupt-parent = <&gpio2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ - reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */ + reg = <1 0 0xf>; /* 16 byte IO range */ bank-width = <2>; pinctrl-names = "default"; pinctrl-0 = <ðernet_pins>; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index c41db94ee9c2..800b379d368d 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ -#include "omap36xx-hs.dtsi" +#include "omap36xx.dtsi" / { cpus { diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 261c5589bfa3..0885b34d5d7d 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -16,3 +16,40 @@ model = "Nokia N950"; compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3"; }; + +&i2c2 { + smia_1: camera@10 { + compatible = "nokia,smia"; + reg = <0x10>; + /* No reset gpio */ + vana-supply = <&vaux3>; + clocks = <&isp 0>; + clock-frequency = <9600000>; + nokia,nvm-size = <(16 * 64)>; + port { + smia_1_1: endpoint { + link-frequencies = /bits/ 64 <210000000 333600000 398400000>; + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&csi2a_ep>; + }; + }; + }; +}; + +&isp { + vdd-csiphy1-supply = <&vaux2>; + vdd-csiphy2-supply = <&vaux2>; + ports { + port@2 { + reg = <2>; + csi2a_ep: endpoint { + remote-endpoint = <&smia_1_1>; + clock-lanes = <2>; + data-lanes = <3 1>; + crc = <1>; + lane-polarities = <1 1 1>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index d36bf0250a05..18e1649681c1 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -27,7 +27,6 @@ ti,model = "overo"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; /* HS USB Port 2 Power */ diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts new file mode 100644 index 000000000000..9619a28dfd7d --- /dev/null +++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2015 + * Nikolaus Schaller <hns@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * device tree for OpenPandora 1GHz with DM3730 + */ + +/dts-v1/; + +#include "omap36xx.dtsi" +#include "omap3-pandora-common.dtsi" + +/ { + model = "Pandora Handheld Console 1GHz"; + + compatible = "ti,omap36xx", "ti,omap3"; +}; + +&omap3_pmx_core2 { + + pinctrl-names = "default"; + pinctrl-0 = < + &hsusb2_2_pins + &control_pins + >; + + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ + OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ + OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */ + OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */ + OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ + OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */ + >; + }; + + control_pins: pinmux_control_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* etk_d0.gpio_14 = HP_SHUTDOWN */ + OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4) /* etk_d1.gpio_15 = BT_SHUTDOWN */ + OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 = RESET_USB_HOST */ + OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE4) /* etk_d7.gpio_21 = WIFI IRQ */ + OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 = MSECURE */ + OMAP3630_CORE2_IOPAD(0x25ee, PIN_OUTPUT | MUX_MODE4) /* etk_d9.gpio_23 = WIFI_POWER */ + OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT | MUX_MODE4) /* reserved.gpio_127 = MMC2_WP */ + OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 = MMC1_WP */ + OMAP3_WKUP_IOPAD(0x2a58, PIN_OUTPUT | MUX_MODE4) /* reserved.gpio_128 = LED_MMC1 */ + OMAP3_WKUP_IOPAD(0x2a5a, PIN_OUTPUT | MUX_MODE4) /* reserved.gpio_129 = LED_MMC2 */ + + >; + }; +}; diff --git a/arch/arm/boot/dts/omap3-pandora-600mhz.dts b/arch/arm/boot/dts/omap3-pandora-600mhz.dts new file mode 100644 index 000000000000..fb803a70a2bb --- /dev/null +++ b/arch/arm/boot/dts/omap3-pandora-600mhz.dts @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2015 + * Nikolaus Schaller <hns@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * device tree for OpenPandora with OMAP3530 + */ + +/dts-v1/; + +#include "omap34xx.dtsi" +#include "omap3-pandora-common.dtsi" + +/ { + model = "Pandora Handheld Console"; + + compatible = "ti,omap3"; +}; + +&omap3_pmx_core2 { + + pinctrl-names = "default"; + pinctrl-0 = < + &hsusb2_2_pins + &control_pins + >; + + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ + OMAP3430_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ + OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */ + OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */ + OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ + OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */ + >; + }; + + control_pins: pinmux_control_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* etk_d0.gpio_14 = HP_SHUTDOWN */ + OMAP3430_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4) /* etk_d1.gpio_15 = BT_SHUTDOWN */ + OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 = RESET_USB_HOST */ + OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE4) /* etk_d7.gpio_21 = WIFI IRQ */ + OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 = MSECURE */ + OMAP3430_CORE2_IOPAD(0x25ee, PIN_OUTPUT | MUX_MODE4) /* etk_d9.gpio_23 = WIFI_POWER */ + >; + }; +}; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi new file mode 100644 index 000000000000..782ab1ff1d08 --- /dev/null +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -0,0 +1,640 @@ +/* + * Copyright (C) 2015 + * Nikolaus Schaller <hns@goldelico.com> + * + * Common device tree include for OpenPandora devices. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + aliases { + display0 = &lcd; + }; + + tv: connector@1 { + compatible = "connector-analog-tv"; + label = "tv"; + + port { + tv_connector_in: endpoint { + remote-endpoint = <&venc_out>; + }; + }; + }; + + gpio-leds { + + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + led@1 { + label = "pandora::sd1"; + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* GPIO_128 */ + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@2 { + label = "pandora::sd2"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* GPIO_129 */ + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led@3 { + label = "pandora::bluetooth"; + gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; /* GPIO_158 */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@4 { + label = "pandora::wifi"; + gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; /* GPIO_159 */ + linux,default-trigger = "mmc2"; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&button_pins>; + + up-button { + label = "up"; + linux,code = <KEY_UP>; + gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* GPIO_110 */ + gpio-key,wakeup; + }; + + down-button { + label = "down"; + linux,code = <KEY_DOWN>; + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* GPIO_103 */ + gpio-key,wakeup; + }; + + left-button { + label = "left"; + linux,code = <KEY_LEFT>; + gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; /* GPIO_96 */ + gpio-key,wakeup; + }; + + right-button { + label = "right"; + linux,code = <KEY_RIGHT>; + gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; /* GPIO_98 */ + gpio-key,wakeup; + }; + + pageup-button { + label = "game 1"; + linux,code = <KEY_PAGEUP>; + gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* GPIO_109 */ + gpio-key,wakeup; + }; + + pagedown-button { + label = "game 3"; + linux,code = <KEY_PAGEDOWN>; + gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* GPIO_106 */ + gpio-key,wakeup; + }; + + home-button { + label = "game 4"; + linux,code = <KEY_HOME>; + gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* GPIO_101 */ + gpio-key,wakeup; + }; + + end-button { + label = "game 2"; + linux,code = <KEY_END>; + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* GPIO_111 */ + gpio-key,wakeup; + }; + + right-shift { + label = "l"; + linux,code = <KEY_RIGHTSHIFT>; + gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* GPIO_102 */ + gpio-key,wakeup; + }; + + kp-plus { + label = "l2"; + linux,code = <KEY_KPPLUS>; + gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* GPIO_97 */ + gpio-key,wakeup; + }; + + right-ctrl { + label = "r"; + linux,code = <KEY_RIGHTCTRL>; + gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* GPIO_105 */ + gpio-key,wakeup; + }; + + kp-minus { + label = "r2"; + linux,code = <KEY_KPMINUS>; + gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* GPIO_107 */ + gpio-key,wakeup; + }; + + left-ctrl { + label = "ctrl"; + linux,code = <KEY_LEFTCTRL>; + gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* GPIO_104 */ + gpio-key,wakeup; + }; + + menu { + label = "menu"; + linux,code = <KEY_MENU>; + gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; /* GPIO_99 */ + gpio-key,wakeup; + }; + + hold { + label = "hold"; + linux,code = <KEY_COFFEE>; + gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* GPIO_176 */ + gpio-key,wakeup; + }; + + left-alt { + label = "alt"; + linux,code = <KEY_LEFTALT>; + gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; /* GPIO_100 */ + gpio-key,wakeup; + }; + + lid { + label = "lid"; + linux,code = <0x00>; /* SW_LID lid shut */ + linux,input-type = <0x05>; /* EV_SW */ + gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; /* GPIO_108 */ + }; + }; +}; + +&omap3_pmx_core { + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dirdat0 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dirdat1 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dircmd */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* GPIO_157 = lcd reset */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + led_pins: pinmux_leds_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4) /* GPIO_128 */ + OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* GPIO_129 */ + OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE4) /* GPIO_158 */ + OMAP3_CORE1_IOPAD(0x2192, PIN_OUTPUT | MUX_MODE4) /* GPIO_159 */ + >; + }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE4) /* GPIO_96 */ + OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE4) /* GPIO_97 */ + OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4) /* GPIO_98 */ + OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE4) /* GPIO_99 */ + OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE4) /* GPIO_100 */ + OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* GPIO_101 */ + OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4) /* GPIO_102 */ + OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4) /* GPIO_103 */ + OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4) /* GPIO_104 */ + OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4) /* GPIO_105 */ + OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4) /* GPIO_106 */ + OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4) /* GPIO_107 */ + OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4) /* GPIO_108 */ + OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* GPIO_109 */ + OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT | MUX_MODE4) /* GPIO_110 */ + OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4) /* GPIO_111 */ + OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* GPIO_176 */ + >; + }; + + penirq_pins: pinmux_penirq_pins { + pinctrl-single,pins = < + /* here we could enable to wakeup the cpu from suspend by a pen touch */ + OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE4) /* GPIO_94 */ + >; + }; + +}; + +&omap3_pmx_core2 { + /* define in CPU specific file that includes this one + * use either OMAP3430_CORE2_IOPAD() or OMAP3630_CORE2_IOPAD() + */ +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_power: power { + compatible = "ti,twl4030-power-reset"; + ti,use_poweroff; + }; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + + codec { + ti,ramp_delay_value = <3>; + }; + }; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&twl_keypad { + keypad,num-rows = <8>; + keypad,num-columns = <6>; + linux,keymap = < + MATRIX_KEY(0, 0, KEY_9) + MATRIX_KEY(0, 1, KEY_8) + MATRIX_KEY(0, 2, KEY_I) + MATRIX_KEY(0, 3, KEY_J) + MATRIX_KEY(0, 4, KEY_N) + MATRIX_KEY(0, 5, KEY_M) + MATRIX_KEY(1, 0, KEY_0) + MATRIX_KEY(1, 1, KEY_7) + MATRIX_KEY(1, 2, KEY_U) + MATRIX_KEY(1, 3, KEY_H) + MATRIX_KEY(1, 4, KEY_B) + MATRIX_KEY(1, 5, KEY_SPACE) + MATRIX_KEY(2, 0, KEY_BACKSPACE) + MATRIX_KEY(2, 1, KEY_6) + MATRIX_KEY(2, 2, KEY_Y) + MATRIX_KEY(2, 3, KEY_G) + MATRIX_KEY(2, 4, KEY_V) + MATRIX_KEY(2, 5, KEY_FN) + MATRIX_KEY(3, 0, KEY_O) + MATRIX_KEY(3, 1, KEY_5) + MATRIX_KEY(3, 2, KEY_T) + MATRIX_KEY(3, 3, KEY_F) + MATRIX_KEY(3, 4, KEY_C) + MATRIX_KEY(4, 0, KEY_P) + MATRIX_KEY(4, 1, KEY_4) + MATRIX_KEY(4, 2, KEY_R) + MATRIX_KEY(4, 3, KEY_D) + MATRIX_KEY(4, 4, KEY_X) + MATRIX_KEY(5, 0, KEY_K) + MATRIX_KEY(5, 1, KEY_3) + MATRIX_KEY(5, 2, KEY_E) + MATRIX_KEY(5, 3, KEY_S) + MATRIX_KEY(5, 4, KEY_Z) + MATRIX_KEY(6, 0, KEY_L) + MATRIX_KEY(6, 1, KEY_2) + MATRIX_KEY(6, 2, KEY_W) + MATRIX_KEY(6, 3, KEY_A) + MATRIX_KEY(6, 4, KEY_RIGHTBRACE) + MATRIX_KEY(7, 0, KEY_ENTER) + MATRIX_KEY(7, 1, KEY_1) + MATRIX_KEY(7, 2, KEY_Q) + MATRIX_KEY(7, 3, KEY_LEFTSHIFT) + MATRIX_KEY(7, 4, KEY_LEFTBRACE ) + >; +}; + +/* backup battery charger */ +&charger { + ti,bb-uvolt = <3200000>; + ti,bb-uamp = <150>; +}; + +/* MMC2 */ +&vmmc2 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <3150000>; +}; + +/* LCD */ +&vaux1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; + +/* USB Host PHY */ +&vaux2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +/* available on expansion connector */ +&vaux3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +/* ADS7846 and nubs */ +&vaux4 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +/* power audio DAC and LID sensor */ +&vsim { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; +}; + +&i2c2 { + clock-frequency = <100000>; + /* no clients so we should disable clock */ +}; + +&i2c3 { + clock-frequency = <100000>; + + bq27500@55 { + compatible = "ti,bq27500"; + reg = <0x55>; + }; + +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + bus-width = <4>; + cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; /* GPIO_126 */ +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vmmc2>; + bus-width = <4>; + cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* GPIO_127 */ +}; + +/* bluetooth*/ +&uart1 { +}; + +/* spare (expansion connector) */ +&uart2 { +}; + +/* console (expansion connector) */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; +}; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&gpmc { + ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + nand-bus-width = <16>; + ti,nand-ecc-opt = "sw"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,device-width = <2>; + + #address-cells = <1>; + #size-cells = <1>; + + /* u-boot uses mtdparts=nand:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs) */ + + x-loader@0 { + label = "xloader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "uboot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "uboot-env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "boot"; + reg = <0x280000 0xa00000>; + }; + + filesystem@680000 { + label = "rootfs"; + reg = <0xc80000 0>; /* 0 = MTDPART_SIZ_FULL */ + }; + }; +}; + +&mcspi1 { + tsc2046@0 { + reg = <0>; /* CS0 */ + compatible = "ti,tsc2046"; + spi-max-frequency = <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&penirq_pins>; + interrupt-parent = <&gpio3>; + interrupts = <30 0>; /* GPIO_94 */ + pendown-gpio = <&gpio3 30 0>; + vcc-supply = <&vaux4>; + + ti,x-min = /bits/ 16 <0>; + ti,x-max = /bits/ 16 <8000>; + ti,y-min = /bits/ 16 <0>; + ti,y-max = /bits/ 16 <4800>; + ti,x-plate-ohms = /bits/ 16 <40>; + ti,pressure-max = /bits/ 16 <255>; + + linux,wakeup; + }; + + lcd: lcd@1 { + reg = <1>; /* CS1 */ + compatible = "omapdss,tpo,td043mtea1"; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + + label = "lcd"; + reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; /* GPIO_157 */ + vcc-supply = <&vaux1>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + + +}; + +/* n/a - used as GPIOs */ +&mcbsp1 { +}; + +/* audio DAC */ +&mcbsp2 { +}; + +/* bluetooth */ +&mcbsp3 { +}; + +/* to twl4030*/ +&mcbsp4 { +}; + +&venc { + status = "ok"; + + vdda-supply = <&vdac>; + + port { + venc_out: endpoint { + remote-endpoint = <&tv_connector_in>; + ti,channels = <2>; + }; + }; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = < &dss_dpi_pins >; + + status = "ok"; + vdds_dsi-supply = <&vpll2>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index e89820a6776e..7bd8d9a4f67f 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -8,7 +8,16 @@ */ /dts-v1/; -#include "omap34xx-hs.dtsi" +#include "omap34xx.dtsi" + +/* Secure omaps have some devices inaccessible depending on the firmware */ +&aes { + status = "disabled"; +}; + +&sham { + status = "disabled"; +}; / { cpus { @@ -45,7 +54,6 @@ /* McBSP2 is used for onboard sound, same as on beagle */ ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; /* Regulator to enable/switch the vcc of the Wifi module */ diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index 6644f516a42b..131448d86e67 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -195,6 +195,16 @@ cap-power-off-card; pinctrl-names = "default"; pinctrl-0 = <&mmc3_pins &mmc3_2_pins>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 162 */ + ref-clock-frequency = <26000000>; + }; }; &uart1 { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 01b71111bd55..d18a90f5eca3 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -87,11 +87,67 @@ ranges; ti,hwmods = "l3_main"; + l4_core: l4@48000000 { + compatible = "ti,omap3-l4-core", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48000000 0x1000000>; + + scm: scm@2000 { + compatible = "ti,omap3-scm", "simple-bus"; + reg = <0x2000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x2000>; + + omap3_pmx_core: pinmux@30 { + compatible = "ti,omap3-padconf", + "pinctrl-single"; + reg = <0x30 0x238>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xff1f>; + }; + + scm_conf: scm_conf@270 { + compatible = "syscon"; + reg = <0x270 0x330>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + scm_clockdomains: clockdomains { + }; + + omap3_pmx_wkup: pinmux@a00 { + compatible = "ti,omap3-padconf", + "pinctrl-single"; + reg = <0xa00 0x5c>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xff1f>; + }; + }; + }; + aes: aes@480c5000 { compatible = "ti,omap3-aes"; ti,hwmods = "aes"; reg = <0x480c5000 0x50>; interrupts = <0>; + dmas = <&sdma 65 &sdma 66>; + dma-names = "tx", "rx"; }; prm: prm@48306000 { @@ -121,19 +177,6 @@ }; }; - scrm: scrm@48002000 { - compatible = "ti,omap3-scrm"; - reg = <0x48002000 0x2000>; - - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - scrm_clockdomains: clockdomains { - }; - }; - counter32k: counter@48320000 { compatible = "ti,omap-counter32k"; reg = <0x48320000 0x20>; @@ -155,41 +198,14 @@ <14>, <15>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <96>; - }; - - omap3_pmx_core: pinmux@48002030 { - compatible = "ti,omap3-padconf", "pinctrl-single"; - reg = <0x48002030 0x0238>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xff1f>; - }; - - omap3_pmx_wkup: pinmux@48002a00 { - compatible = "ti,omap3-padconf", "pinctrl-single"; - reg = <0x48002a00 0x5c>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xff1f>; - }; - - omap3_scm_general: tisyscon@48002270 { - compatible = "syscon"; - reg = <0x48002270 0x2f0>; + dma-channels = <32>; + dma-requests = <96>; }; pbias_regulator: pbias_regulator { compatible = "ti,pbias-omap"; reg = <0x2b0 0x4>; - syscon = <&omap3_scm_general>; + syscon = <&scm_conf>; pbias_mmc_reg: pbias_mmc_omap2430 { regulator-name = "pbias_mmc_omap2430"; regulator-min-microvolt = <1800000>; @@ -550,6 +566,8 @@ ti,hwmods = "sham"; reg = <0x480c3000 0x64>; interrupts = <49>; + dmas = <&sdma 69>; + dma-names = "rx"; }; smartreflex_core: smartreflex@480cb000 { diff --git a/arch/arm/boot/dts/omap34xx-hs.dtsi b/arch/arm/boot/dts/omap34xx-hs.dtsi deleted file mode 100644 index 1ff626489546..000000000000 --- a/arch/arm/boot/dts/omap34xx-hs.dtsi +++ /dev/null @@ -1,16 +0,0 @@ -/* Disabled modules for secure omaps */ - -#include "omap34xx.dtsi" - -/* Secure omaps have some devices inaccessible depending on the firmware */ -&aes { - status = "disabled"; -}; - -&sham { - status = "disabled"; -}; - -&timer12 { - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 3819c1e91591..4f6b2d5b1902 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -8,6 +8,8 @@ * kind, whether express or implied. */ +#include <dt-bindings/media/omap3-isp.h> + #include "omap3.dtsi" / { @@ -37,6 +39,21 @@ pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0xff1f>; }; + + isp: isp@480bc000 { + compatible = "ti,omap3-isp"; + reg = <0x480bc000 0x12fc + 0x480bd800 0x017c>; + interrupts = <24>; + iommus = <&mmu_isp>; + syscon = <&scm_conf 0xdc>; + ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>; + #clock-cells = <1>; + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/omap36xx-hs.dtsi b/arch/arm/boot/dts/omap36xx-hs.dtsi deleted file mode 100644 index 2c7febb0e016..000000000000 --- a/arch/arm/boot/dts/omap36xx-hs.dtsi +++ /dev/null @@ -1,16 +0,0 @@ -/* Disabled modules for secure omaps */ - -#include "omap36xx.dtsi" - -/* Secure omaps have some devices inaccessible depending on the firmware */ -&aes { - status = "disabled"; -}; - -&sham { - status = "disabled"; -}; - -&timer12 { - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 541704a59a5a..86253de5a97a 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -8,6 +8,8 @@ * kind, whether express or implied. */ +#include <dt-bindings/media/omap3-isp.h> + #include "omap3.dtsi" / { @@ -69,6 +71,21 @@ pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0xff1f>; }; + + isp: isp@480bc000 { + compatible = "ti,omap3-isp"; + reg = <0x480bc000 0x12fc + 0x480bd800 0x0600>; + interrupts = <24>; + iommus = <&mmu_isp>; + syscon = <&scm_conf 0x2f0>; + ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>; + #clock-cells = <1>; + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi index 5c375003bad1..bbba5bdc4bc9 100644 --- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi +++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi @@ -79,13 +79,14 @@ clock-div = <1>; }; }; -&scrm_clocks { + +&scm_clocks { mcbsp5_mux_fck: mcbsp5_mux_fck { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&core_96m_fck>, <&mcbsp_clks>; ti,bit-shift = <4>; - reg = <0x02d8>; + reg = <0x68>; }; mcbsp5_fck: mcbsp5_fck { @@ -99,7 +100,7 @@ compatible = "ti,composite-mux-clock"; clocks = <&core_96m_fck>, <&mcbsp_clks>; ti,bit-shift = <2>; - reg = <0x0274>; + reg = <0x04>; }; mcbsp1_fck: mcbsp1_fck { @@ -113,7 +114,7 @@ compatible = "ti,composite-mux-clock"; clocks = <&per_96m_fck>, <&mcbsp_clks>; ti,bit-shift = <6>; - reg = <0x0274>; + reg = <0x04>; }; mcbsp2_fck: mcbsp2_fck { @@ -126,7 +127,7 @@ #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&per_96m_fck>, <&mcbsp_clks>; - reg = <0x02d8>; + reg = <0x68>; }; mcbsp3_fck: mcbsp3_fck { @@ -140,7 +141,7 @@ compatible = "ti,composite-mux-clock"; clocks = <&per_96m_fck>, <&mcbsp_clks>; ti,bit-shift = <2>; - reg = <0x02d8>; + reg = <0x68>; }; mcbsp4_fck: mcbsp4_fck { diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi index cb9458feb2e3..ab7f87ae96f0 100644 --- a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi @@ -18,7 +18,7 @@ cpu_thermal: cpu_thermal { /* sensor ID */ thermal-sensors = <&bandgap 0>; - trips { + cpu_trips: trips { cpu_alert0: cpu_alert { temperature = <100000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ @@ -31,7 +31,7 @@ cpu_thermal: cpu_thermal { }; }; - cooling-maps { + cpu_cooling_maps: cooling-maps { map0 { trip = <&cpu_alert0>; cooling-device = diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index e860ccd9d09c..f2a94fa62552 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -173,14 +173,12 @@ twl: twl@48 { reg = <0x48>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-parent = <&gic>; }; twl6040: twl@4b { compatible = "ti,twl6040"; reg = <0x4b>; interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ - interrupt-parent = <&gic>; ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* gpio_160 */ vio-supply = <&v1v8>; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 150513506c19..f1507bc8737e 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -372,7 +372,6 @@ reg = <0x48>; /* IRQ# = 7 */ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-parent = <&gic>; }; twl6040: twl@4b { @@ -384,7 +383,6 @@ /* IRQ# = 119 */ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ - interrupt-parent = <&gic>; ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */ vio-supply = <&v1v8>; @@ -450,6 +448,16 @@ non-removable; bus-width = <4>; cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio2>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */ + ref-clock-frequency = <38400000>; + }; }; &emif1 { @@ -479,17 +487,17 @@ }; &uart2 { - interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core OMAP4_UART2_RX>; }; &uart3 { - interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core OMAP4_UART3_RX>; }; &uart4 { - interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core OMAP4_UART4_RX>; }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 3e1da43068f6..dac86ed7481f 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -363,7 +363,6 @@ reg = <0x48>; /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-parent = <&gic>; }; twl6040: twl@4b { @@ -375,7 +374,6 @@ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ - interrupt-parent = <&gic>; ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ vio-supply = <&v1v8>; @@ -487,6 +485,17 @@ non-removable; bus-width = <4>; cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1281"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */ + ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; + }; }; &emif1 { @@ -570,21 +579,21 @@ }; &uart2 { - interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core OMAP4_UART2_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; &uart3 { - interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core OMAP4_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; &uart4 { - interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core OMAP4_UART4_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart4_pins>; diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi index cc66af419236..9bceeb7e1f03 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi @@ -65,4 +65,14 @@ bus-width = <4>; cap-power-off-card; status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio2>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */ + ref-clock-frequency = <38400000>; + }; }; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index 062701e1a898..a4f1ba2e1903 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -185,7 +185,6 @@ reg = <0x48>; /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-parent = <&gic>; }; twl6040: twl@4b { @@ -197,7 +196,6 @@ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ - interrupt-parent = <&gic>; ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */ vio-supply = <&v1v8>; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 074147cebae4..f884d6adb71e 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -14,7 +14,7 @@ / { compatible = "ti,omap4430", "ti,omap4"; - interrupt-parent = <&gic>; + interrupt-parent = <&wakeupgen>; aliases { i2c0 = &i2c1; @@ -56,6 +56,7 @@ #interrupt-cells = <3>; reg = <0x48241000 0x1000>, <0x48240100 0x0100>; + interrupt-parent = <&gic>; }; L2: l2-cache-controller@48242000 { @@ -70,6 +71,15 @@ clocks = <&mpu_periphclk>; reg = <0x48240600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; + }; + + wakeupgen: interrupt-controller@48281000 { + compatible = "ti,omap4-wugen-mpu"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48281000 0x1000>; + interrupt-parent = <&gic>; }; /* @@ -114,99 +124,141 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - cm1: cm1@4a004000 { - compatible = "ti,omap4-cm1"; - reg = <0x4a004000 0x2000>; - - cm1_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm1_clockdomains: clockdomains { - }; - }; + l4_cfg: l4@4a000000 { + compatible = "ti,omap4-l4-cfg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a000000 0x1000000>; - prm: prm@4a306000 { - compatible = "ti,omap4-prm"; - reg = <0x4a306000 0x3000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + cm1: cm1@4000 { + compatible = "ti,omap4-cm1"; + reg = <0x4000 0x2000>; - prm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + cm1_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - prm_clockdomains: clockdomains { + cm1_clockdomains: clockdomains { + }; }; - }; - cm2: cm2@4a008000 { - compatible = "ti,omap4-cm2"; - reg = <0x4a008000 0x3000>; + cm2: cm2@8000 { + compatible = "ti,omap4-cm2"; + reg = <0x8000 0x3000>; - cm2_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + cm2_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - cm2_clockdomains: clockdomains { + cm2_clockdomains: clockdomains { + }; }; - }; - scrm: scrm@4a30a000 { - compatible = "ti,omap4-scrm"; - reg = <0x4a30a000 0x2000>; - - scrm_clocks: clocks { + omap4_scm_core: scm@2000 { + compatible = "ti,omap4-scm-core", "simple-bus"; + reg = <0x2000 0x1000>; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges = <0 0x2000 0x1000>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + }; }; - scrm_clockdomains: clockdomains { + omap4_padconf_core: scm@100000 { + compatible = "ti,omap4-scm-padconf-core", + "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x100000 0x1000>; + + omap4_pmx_core: pinmux@40 { + compatible = "ti,omap4-padconf", + "pinctrl-single"; + reg = <0x40 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap4_padconf_global: omap4_padconf_global@5a0 { + compatible = "syscon"; + reg = <0x5a0 0x170>; + #address-cells = <1>; + #size-cells = <1>; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0x60 0x4>; + syscon = <&omap4_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap4 { + regulator-name = "pbias_mmc_omap4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; }; - }; - - counter32k: counter@4a304000 { - compatible = "ti,omap-counter32k"; - reg = <0x4a304000 0x20>; - ti,hwmods = "counter_32k"; - }; - omap4_pmx_core: pinmux@4a100040 { - compatible = "ti,omap4-padconf", "pinctrl-single"; - reg = <0x4a100040 0x0196>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - omap4_pmx_wkup: pinmux@4a31e040 { - compatible = "ti,omap4-padconf", "pinctrl-single"; - reg = <0x4a31e040 0x0038>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - - omap4_padconf_global: tisyscon@4a1005a0 { - compatible = "syscon"; - reg = <0x4a1005a0 0x170>; - }; - - pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; - reg = <0x60 0x4>; - syscon = <&omap4_padconf_global>; - pbias_mmc_reg: pbias_mmc_omap4 { - regulator-name = "pbias_mmc_omap4"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + l4_wkup: l4@300000 { + compatible = "ti,omap4-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x300000 0x40000>; + + counter32k: counter@4000 { + compatible = "ti,omap-counter32k"; + reg = <0x4000 0x20>; + ti,hwmods = "counter_32k"; + }; + + prm: prm@6000 { + compatible = "ti,omap4-prm"; + reg = <0x6000 0x3000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; + }; + + scrm: scrm@a000 { + compatible = "ti,omap4-scrm"; + reg = <0xa000 0x2000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + + omap4_pmx_wkup: pinmux@1e040 { + compatible = "ti,omap4-padconf", + "pinctrl-single"; + reg = <0x1e040 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; }; }; @@ -223,8 +275,8 @@ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <127>; + dma-channels = <32>; + dma-requests = <127>; }; gpio1: gpio@4a310000 { @@ -319,7 +371,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; @@ -327,7 +379,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; @@ -335,7 +387,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index b54b271e153b..61ad2ea34720 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -412,7 +412,6 @@ palmas: palmas@48 { compatible = "ti,palmas"; interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ - interrupt-parent = <&gic>; reg = <0x48>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/omap5-core-thermal.dtsi b/arch/arm/boot/dts/omap5-core-thermal.dtsi index 19212ac6eef0..de8a3d456cf7 100644 --- a/arch/arm/boot/dts/omap5-core-thermal.dtsi +++ b/arch/arm/boot/dts/omap5-core-thermal.dtsi @@ -13,7 +13,7 @@ core_thermal: core_thermal { polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ /* sensor ID */ thermal-sensors = <&bandgap 2>; diff --git a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi index 1b87aca88b77..bc3090f2e84b 100644 --- a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi @@ -13,7 +13,7 @@ gpu_thermal: gpu_thermal { polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ /* sensor ID */ thermal-sensors = <&bandgap 1>; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 159720d6c956..74777a6e200a 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -311,7 +311,6 @@ palmas: palmas@48 { compatible = "ti,palmas"; interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ - interrupt-parent = <&gic>; reg = <0x48>; interrupt-controller; #interrupt-cells = <2>; @@ -521,7 +520,6 @@ pinctrl-0 = <&twl6040_pins>; interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */ - interrupt-parent = <&gic>; ti,audpwron-gpio = <&gpio5 13 0>; /* gpio line 141 */ vio-supply = <&smps7_reg>; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index b321fdf42c9f..efe5f737f39b 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -18,7 +18,7 @@ #size-cells = <1>; compatible = "ti,omap5"; - interrupt-parent = <&gic>; + interrupt-parent = <&wakeupgen>; aliases { i2c0 = &i2c1; @@ -79,6 +79,7 @@ <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; }; pmu { @@ -95,6 +96,15 @@ <0x48212000 0x1000>, <0x48214000 0x2000>, <0x48216000 0x2000>; + interrupt-parent = <&gic>; + }; + + wakeupgen: interrupt-controller@48281000 { + compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48281000 0x1000>; + interrupt-parent = <&gic>; }; /* @@ -129,99 +139,141 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - prm: prm@4ae06000 { - compatible = "ti,omap5-prm"; - reg = <0x4ae06000 0x3000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + l4_cfg: l4@4a000000 { + compatible = "ti,omap5-l4-cfg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a000000 0x22a000>; - prm_clocks: clocks { + scm_core: scm@2000 { + compatible = "ti,omap5-scm-core", "simple-bus"; + reg = <0x2000 0x1000>; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges = <0 0x2000 0x800>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + }; }; - prm_clockdomains: clockdomains { + scm_padconf_core: scm@2800 { + compatible = "ti,omap5-scm-padconf-core", + "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2800 0x800>; + + omap5_pmx_core: pinmux@40 { + compatible = "ti,omap5-padconf", + "pinctrl-single"; + reg = <0x40 0x01b6>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap5_padconf_global: omap5_padconf_global@5a0 { + compatible = "syscon"; + reg = <0x5a0 0xec>; + #address-cells = <1>; + #size-cells = <1>; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0x60 0x4>; + syscon = <&omap5_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; }; - }; - cm_core_aon: cm_core_aon@4a004000 { - compatible = "ti,omap5-cm-core-aon"; - reg = <0x4a004000 0x2000>; + cm_core_aon: cm_core_aon@4000 { + compatible = "ti,omap5-cm-core-aon"; + reg = <0x4000 0x2000>; - cm_core_aon_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + cm_core_aon_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - cm_core_aon_clockdomains: clockdomains { + cm_core_aon_clockdomains: clockdomains { + }; }; - }; - scrm: scrm@4ae0a000 { - compatible = "ti,omap5-scrm"; - reg = <0x4ae0a000 0x2000>; + cm_core: cm_core@8000 { + compatible = "ti,omap5-cm-core"; + reg = <0x8000 0x3000>; - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + cm_core_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - scrm_clockdomains: clockdomains { + cm_core_clockdomains: clockdomains { + }; }; }; - cm_core: cm_core@4a008000 { - compatible = "ti,omap5-cm-core"; - reg = <0x4a008000 0x3000>; + l4_wkup: l4@4ae00000 { + compatible = "ti,omap5-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4ae00000 0x2b000>; - cm_core_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; + counter32k: counter@4000 { + compatible = "ti,omap-counter32k"; + reg = <0x4000 0x40>; + ti,hwmods = "counter_32k"; }; - cm_core_clockdomains: clockdomains { + prm: prm@6000 { + compatible = "ti,omap5-prm"; + reg = <0x6000 0x3000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; }; - }; - counter32k: counter@4ae04000 { - compatible = "ti,omap-counter32k"; - reg = <0x4ae04000 0x40>; - ti,hwmods = "counter_32k"; - }; + scrm: scrm@a000 { + compatible = "ti,omap5-scrm"; + reg = <0xa000 0x2000>; - omap5_pmx_core: pinmux@4a002840 { - compatible = "ti,omap5-padconf", "pinctrl-single"; - reg = <0x4a002840 0x01b6>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - omap5_pmx_wkup: pinmux@4ae0c840 { - compatible = "ti,omap5-padconf", "pinctrl-single"; - reg = <0x4ae0c840 0x0038>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - omap5_padconf_global: tisyscon@4a002da0 { - compatible = "syscon"; - reg = <0x4A002da0 0xec>; - }; + scrm_clockdomains: clockdomains { + }; + }; - pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; - reg = <0x60 0x4>; - syscon = <&omap5_padconf_global>; - pbias_mmc_reg: pbias_mmc_omap5 { - regulator-name = "pbias_mmc_omap5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + omap5_pmx_wkup: pinmux@c840 { + compatible = "ti,omap5-padconf", + "pinctrl-single"; + reg = <0xc840 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; }; }; @@ -238,8 +290,8 @@ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <127>; + dma-channels = <32>; + dma-requests = <127>; }; gpio1: gpio@4ae10000 { @@ -458,7 +510,7 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; @@ -466,7 +518,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; @@ -474,7 +526,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; @@ -482,7 +534,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; @@ -490,7 +542,7 @@ uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts-extended = <&gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart5"; clock-frequency = <48000000>; }; @@ -498,7 +550,7 @@ uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts-extended = <&gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart6"; clock-frequency = <48000000>; }; @@ -883,14 +935,12 @@ usbhsohci: ohci@4a064800 { compatible = "ti,ohci-omap3"; reg = <0x4a064800 0x400>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; }; usbhsehci: ehci@4a064c00 { compatible = "ti,ehci-omap"; reg = <0x4a064c00 0x400>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -929,8 +979,8 @@ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_sata>; - clocks = <&sys_clkin>; - clock-names = "sysclk"; + clocks = <&sys_clkin>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; #phy-cells = <0>; }; }; @@ -1079,4 +1129,8 @@ }; }; +&cpu_thermal { + polling-delay = <500>; /* milliseconds */ +}; + /include/ "omap54xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index 58c27466f012..83b425fb3ac2 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -167,10 +167,18 @@ ti,index-starts-at-one; }; + dpll_core_byp_mux: dpll_core_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x012c>; + }; + dpll_core_ck: dpll_core_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; - clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -294,10 +302,18 @@ clock-div = <1>; }; + dpll_iva_byp_mux: dpll_iva_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x01ac>; + }; + dpll_iva_ck: dpll_iva_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>; + clocks = <&sys_clkin>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; }; @@ -599,10 +615,19 @@ }; }; &cm_core_clocks { + + dpll_per_byp_mux: dpll_per_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x014c>; + }; + dpll_per_ck: dpll_per_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>; + clocks = <&sys_clkin>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -714,10 +739,18 @@ ti,index-starts-at-one; }; + dpll_usb_byp_mux: dpll_usb_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x018c>; + }; + dpll_usb_ck: dpll_usb_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; - clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>; + clocks = <&sys_clkin>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index b3154c071652..6c1511263a55 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -23,6 +23,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_SPC>; }; cpu@1 { @@ -33,6 +34,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_SPC>; }; cpu@2 { @@ -43,6 +45,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_SPC>; }; cpu@3 { @@ -53,12 +56,23 @@ next-level-cache = <&L2>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_SPC>; }; L2: l2-cache { compatible = "cache"; cache-level = <2>; }; + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", + "arm,idle-state"; + entry-latency-us = <400>; + exit-latency-us = <900>; + min-residency-us = <3000>; + }; + }; }; cpu-pmu { @@ -139,26 +153,26 @@ reg = <0x020b8000 0x1000>, <0x02008000 0x1000>; }; - saw0: regulator@2089000 { - compatible = "qcom,saw2"; + saw0: power-controller@2089000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; reg = <0x02089000 0x1000>, <0x02009000 0x1000>; regulator; }; - saw1: regulator@2099000 { - compatible = "qcom,saw2"; + saw1: power-controller@2099000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; reg = <0x02099000 0x1000>, <0x02009000 0x1000>; regulator; }; - saw2: regulator@20a9000 { - compatible = "qcom,saw2"; + saw2: power-controller@20a9000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; reg = <0x020a9000 0x1000>, <0x02009000 0x1000>; regulator; }; - saw3: regulator@20b9000 { - compatible = "qcom,saw2"; + saw3: power-controller@20b9000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; reg = <0x020b9000 0x1000>, <0x02009000 0x1000>; regulator; }; @@ -166,6 +180,7 @@ gsbi1: gsbi@12440000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; + cell-index = <1>; reg = <0x12440000 0x100>; clocks = <&gcc GSBI1_H_CLK>; clock-names = "iface"; @@ -173,6 +188,8 @@ #size-cells = <1>; ranges; + syscon-tcsr = <&tcsr>; + i2c1: i2c@12460000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x12460000 0x1000>; @@ -187,6 +204,7 @@ gsbi2: gsbi@12480000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; + cell-index = <2>; reg = <0x12480000 0x100>; clocks = <&gcc GSBI2_H_CLK>; clock-names = "iface"; @@ -194,6 +212,8 @@ #size-cells = <1>; ranges; + syscon-tcsr = <&tcsr>; + i2c2: i2c@124a0000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x124a0000 0x1000>; @@ -208,6 +228,7 @@ gsbi7: gsbi@16600000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; + cell-index = <7>; reg = <0x16600000 0x100>; clocks = <&gcc GSBI7_H_CLK>; clock-names = "iface"; @@ -215,6 +236,8 @@ #size-cells = <1>; ranges; + syscon-tcsr = <&tcsr>; + serial@16640000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16640000 0x1000>, @@ -239,6 +262,13 @@ #reset-cells = <1>; }; + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-apq8064"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + mmcc: clock-controller@4000000 { compatible = "qcom,mmcc-apq8064"; reg = <0x4000000 0x1000>; @@ -349,5 +379,10 @@ pinctrl-0 = <&sdc4_gpios>; }; }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-apq8064", "syscon"; + reg = <0x1a400000 0x100>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index 47370494d0f8..d484d08163e9 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -1,4 +1,6 @@ #include "qcom-msm8974.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" / { model = "Qualcomm APQ8074 Dragonboard"; diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts index c9ff10821ad9..f7725b96612c 100644 --- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts @@ -1,4 +1,5 @@ #include "qcom-apq8084.dtsi" +#include "qcom-pma8084.dtsi" / { model = "Qualcomm APQ8084/IFC6540"; diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts index 8ecec58a9ff6..cb43acfc5d1d 100644 --- a/arch/arm/boot/dts/qcom-apq8084-mtp.dts +++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts @@ -1,4 +1,5 @@ #include "qcom-apq8084.dtsi" +#include "qcom-pma8084.dtsi" / { model = "Qualcomm APQ 8084-MTP"; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 1f130bc16858..7084010ee61b 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -21,6 +21,8 @@ enable-method = "qcom,kpss-acc-v2"; next-level-cache = <&L2>; qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_SPC>; }; cpu@1 { @@ -30,6 +32,8 @@ enable-method = "qcom,kpss-acc-v2"; next-level-cache = <&L2>; qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_SPC>; }; cpu@2 { @@ -39,6 +43,8 @@ enable-method = "qcom,kpss-acc-v2"; next-level-cache = <&L2>; qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_SPC>; }; cpu@3 { @@ -48,6 +54,8 @@ enable-method = "qcom,kpss-acc-v2"; next-level-cache = <&L2>; qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_SPC>; }; L2: l2-cache { @@ -55,6 +63,16 @@ cache-level = <2>; qcom,saw = <&saw_l2>; }; + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", + "arm,idle-state"; + entry-latency-us = <150>; + exit-latency-us = <200>; + min-residency-us = <2000>; + }; + }; }; cpu-pmu { @@ -144,7 +162,27 @@ }; }; - saw_l2: regulator@f9012000 { + saw0: power-controller@f9089000 { + compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; + }; + + saw1: power-controller@f9099000 { + compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; + }; + + saw2: power-controller@f90a9000 { + compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; + }; + + saw3: power-controller@f90b9000 { + compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; + }; + + saw_l2: power-controller@f9012000 { compatible = "qcom,saw2"; reg = <0xf9012000 0x1000>; regulator; @@ -226,5 +264,21 @@ clock-names = "core", "iface"; status = "disabled"; }; + + spmi_bus: spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + interrupt-names = "periph_irq"; + interrupts = <0 190 0>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index cb225dafe97c..9f727d8eadf6 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -2,6 +2,7 @@ #include "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-ipq806x.h> +#include <dt-bindings/clock/qcom,lcc-ipq806x.h> #include <dt-bindings/soc/qcom,gsbi.h> / { @@ -60,12 +61,35 @@ }; }; + clocks { + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; ranges; compatible = "simple-bus"; + lpass@28100000 { + compatible = "qcom,lpass-cpu"; + status = "disabled"; + clocks = <&lcc AHBIX_CLK>, + <&lcc MI2S_OSR_CLK>, + <&lcc MI2S_BIT_CLK>; + clock-names = "ahbix-clk", + "mi2s-osr-clk", + "mi2s-bit-clk"; + interrupts = <0 85 1>; + interrupt-names = "lpass-irq-lpaif"; + reg = <0x28100000 0x10000>; + reg-names = "lpass-lpaif"; + }; + qcom_pinmux: pinmux@800000 { compatible = "qcom,ipq8064-pinctrl"; reg = <0x800000 0x4000>; @@ -89,10 +113,14 @@ compatible = "qcom,kpss-timer", "qcom,msm-timer"; interrupts = <1 1 0x301>, <1 2 0x301>, - <1 3 0x301>; + <1 3 0x301>, + <1 4 0x301>, + <1 5 0x301>; reg = <0x0200a000 0x100>; clock-frequency = <25000000>, <32768>; + clocks = <&sleep_clk>; + clock-names = "sleep"; cpu-offset = <0x80000>; }; @@ -120,6 +148,7 @@ gsbi2: gsbi@12480000 { compatible = "qcom,gsbi-v1.0.0"; + cell-index = <2>; reg = <0x12480000 0x100>; clocks = <&gcc GSBI2_H_CLK>; clock-names = "iface"; @@ -128,6 +157,8 @@ ranges; status = "disabled"; + syscon-tcsr = <&tcsr>; + serial@12490000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x12490000 0x1000>, @@ -155,6 +186,7 @@ gsbi4: gsbi@16300000 { compatible = "qcom,gsbi-v1.0.0"; + cell-index = <4>; reg = <0x16300000 0x100>; clocks = <&gcc GSBI4_H_CLK>; clock-names = "iface"; @@ -163,6 +195,8 @@ ranges; status = "disabled"; + syscon-tcsr = <&tcsr>; + serial@16340000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16340000 0x1000>, @@ -189,6 +223,7 @@ gsbi5: gsbi@1a200000 { compatible = "qcom,gsbi-v1.0.0"; + cell-index = <5>; reg = <0x1a200000 0x100>; clocks = <&gcc GSBI5_H_CLK>; clock-names = "iface"; @@ -197,6 +232,8 @@ ranges; status = "disabled"; + syscon-tcsr = <&tcsr>; + serial@1a240000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x1a240000 0x1000>, @@ -279,5 +316,18 @@ #clock-cells = <1>; #reset-cells = <1>; }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-ipq8064", "syscon"; + reg = <0x1a400000 0x100>; + }; + + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-ipq8064"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 0affd6193f56..20bbd19b996e 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -82,6 +82,7 @@ gsbi12: gsbi@19c00000 { compatible = "qcom,gsbi-v1.0.0"; + cell-index = <12>; reg = <0x19c00000 0x100>; clocks = <&gcc GSBI12_H_CLK>; clock-names = "iface"; @@ -89,6 +90,8 @@ #size-cells = <1>; ranges; + syscon-tcsr = <&tcsr>; + serial@19c40000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x19c40000 0x1000>, @@ -196,6 +199,11 @@ vmmc-supply = <&vsdcc_fixed>; }; }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-msm8660", "syscon"; + reg = <0x1a400000 0x100>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index e1b0d5cd9e3c..a02b984cc68d 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -91,6 +91,13 @@ reg = <0x900000 0x4000>; }; + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-msm8960"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + clock-controller@4000000 { compatible = "qcom,mmcc-msm8960"; reg = <0x4000000 0x1000>; @@ -122,6 +129,7 @@ gsbi5: gsbi@16400000 { compatible = "qcom,gsbi-v1.0.0"; + cell-index = <5>; reg = <0x16400000 0x100>; clocks = <&gcc GSBI5_H_CLK>; clock-names = "iface"; @@ -129,6 +137,8 @@ #size-cells = <1>; ranges; + syscon-tcsr = <&tcsr>; + serial@16440000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16440000 0x1000>, @@ -238,5 +248,10 @@ vmmc-supply = <&vsdcc_fixed>; }; }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-msm8960", "syscon"; + reg = <0x1a400000 0x100>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index cccc21b7c8fd..bd35b0674ff6 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -1,4 +1,6 @@ #include "qcom-msm8974.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" / { model = "Sony Xperia Z1"; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index e265ec16a787..37b47b5538b8 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -21,6 +21,8 @@ reg = <0>; next-level-cache = <&L2>; qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_SPC>; }; cpu@1 { @@ -30,6 +32,8 @@ reg = <1>; next-level-cache = <&L2>; qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_SPC>; }; cpu@2 { @@ -39,6 +43,8 @@ reg = <2>; next-level-cache = <&L2>; qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_SPC>; }; cpu@3 { @@ -48,6 +54,8 @@ reg = <3>; next-level-cache = <&L2>; qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_SPC>; }; L2: l2-cache { @@ -55,6 +63,16 @@ cache-level = <2>; qcom,saw = <&saw_l2>; }; + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", + "arm,idle-state"; + entry-latency-us = <150>; + exit-latency-us = <200>; + min-residency-us = <2000>; + }; + }; }; cpu-pmu { @@ -144,7 +162,27 @@ }; }; - saw_l2: regulator@f9012000 { + saw0: power-controller@f9089000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; + }; + + saw1: power-controller@f9099000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; + }; + + saw2: power-controller@f90a9000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; + }; + + saw3: power-controller@f90b9000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; + }; + + saw_l2: power-controller@f9012000 { compatible = "qcom,saw2"; reg = <0xf9012000 0x1000>; regulator; @@ -247,5 +285,21 @@ #address-cells = <1>; #size-cells = <0>; }; + + spmi_bus: spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + interrupt-names = "periph_irq"; + interrupts = <0 190 0>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi new file mode 100644 index 000000000000..73813cc118f9 --- /dev/null +++ b/arch/arm/boot/dts/qcom-pm8841.dtsi @@ -0,0 +1,18 @@ +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + + usid4: pm8841@4 { + compatible = "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + usid5: pm8841@5 { + compatible = "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi new file mode 100644 index 000000000000..24c5088acea2 --- /dev/null +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -0,0 +1,18 @@ +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + + usid0: pm8941@0 { + compatible ="qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + usid1: pm8941@1 { + compatible ="qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi new file mode 100644 index 000000000000..a5a4fe695a46 --- /dev/null +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -0,0 +1,18 @@ +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + + usid0: pma8084@0 { + compatible = "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + usid1: pma8084@1 { + compatible = "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts deleted file mode 100644 index b3d8f844b57a..000000000000 --- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts +++ /dev/null @@ -1,156 +0,0 @@ -/* - * Device Tree Source for the APE6EVM board - * - * Copyright (C) 2013 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "r8a73a4.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "APE6EVM"; - compatible = "renesas,ape6evm-reference", "renesas,r8a73a4"; - - aliases { - serial0 = &scifa0; - }; - - chosen { - bootargs = "ignore_loglevel rw"; - stdout-path = &scifa0; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0 0x40000000 0 0x40000000>; - }; - - memory@200000000 { - device_type = "memory"; - reg = <2 0x00000000 0 0x40000000>; - }; - - vcc_mmc0: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "MMC0 Vcc"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - vcc_sdhi0: regulator@1 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&pfc 76 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - /* Common 3.3V rail, used by several devices on APE6EVM */ - ape6evm_fixed_3v3: regulator@2 { - compatible = "regulator-fixed"; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - lbsc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0x20000000>; - }; -}; - -&i2c5 { - status = "okay"; - vdd_dvfs: max8973@1b { - compatible = "maxim,max8973"; - reg = <0x1b>; - - regulator-min-microvolt = <935000>; - regulator-max-microvolt = <1200000>; - regulator-boot-on; - regulator-always-on; - }; -}; - -&cpu0 { - cpu0-supply = <&vdd_dvfs>; - operating-points = < - /* kHz uV */ - 1950000 1115000 - 1462500 995000 - >; - voltage-tolerance = <1>; /* 1% */ -}; - -&cmt1 { - status = "okay"; -}; - -&pfc { - scifa0_pins: serial0 { - renesas,groups = "scifa0_data"; - renesas,function = "scifa0"; - }; - - mmc0_pins: mmc { - renesas,groups = "mmc0_data8", "mmc0_ctrl"; - renesas,function = "mmc0"; - }; - - sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; - renesas,function = "sdhi0"; - }; - - sdhi1_pins: sd1 { - renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; - renesas,function = "sdhi1"; - }; -}; - -&mmcif0 { - vmmc-supply = <&vcc_mmc0>; - bus-width = <8>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - status = "okay"; -}; - -&scifa0 { - pinctrl-0 = <&scifa0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&sdhi0 { - vmmc-supply = <&vcc_sdhi0>; - bus-width = <4>; - toshiba,mmc-wrprotect-disable; - pinctrl-names = "default"; - pinctrl-0 = <&sdhi0_pins>; - status = "okay"; -}; - -&sdhi1 { - vmmc-supply = <&ape6evm_fixed_3v3>; - bus-width = <4>; - broken-cd; - toshiba,mmc-wrprotect-disable; - pinctrl-names = "default"; - pinctrl-0 = <&sdhi1_pins>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 0d50bef01234..81a38ceee098 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -22,7 +22,7 @@ }; chosen { - bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; + bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw"; stdout-path = &scifa0; }; @@ -72,50 +72,30 @@ regulator-always-on; }; - lbsc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0x20000000>; - - ethernet@8000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x08000000 0x1000>; - interrupt-parent = <&irqc1>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; - phy-mode = "mii"; - reg-io-width = <4>; - smsc,irq-active-high; - smsc,irq-push-pull; - vdd33a-supply = <&ape6evm_fixed_3v3>; - vddvario-supply = <&ape6evm_fixed_1v8>; - }; - }; - leds { compatible = "gpio-leds"; led1 { - gpios = <&pfc 28 GPIO_ACTIVE_LOW>; + gpios = <&pfc 28 GPIO_ACTIVE_HIGH>; label = "GNSS_EN"; }; led2 { - gpios = <&pfc 126 GPIO_ACTIVE_LOW>; + gpios = <&pfc 126 GPIO_ACTIVE_HIGH>; label = "NFC_NRST"; }; led3 { - gpios = <&pfc 132 GPIO_ACTIVE_LOW>; + gpios = <&pfc 132 GPIO_ACTIVE_HIGH>; label = "GNSS_NRST"; }; led4 { - gpios = <&pfc 232 GPIO_ACTIVE_LOW>; + gpios = <&pfc 232 GPIO_ACTIVE_HIGH>; label = "BT_WAKEUP"; }; led5 { - gpios = <&pfc 250 GPIO_ACTIVE_LOW>; + gpios = <&pfc 250 GPIO_ACTIVE_HIGH>; label = "STROBE"; }; led6 { - gpios = <&pfc 288 GPIO_ACTIVE_LOW>; + gpios = <&pfc 288 GPIO_ACTIVE_HIGH>; label = "BBRESETOUT"; }; }; @@ -123,10 +103,14 @@ keyboard { compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&keyboard_pins>; + zero-key { gpios = <&pfc 324 GPIO_ACTIVE_LOW>; linux,code = <KEY_0>; label = "S16"; + gpio-key,wakeup; }; menu-key { @@ -184,6 +168,21 @@ voltage-tolerance = <1>; /* 1% */ }; +&bsc { + ethernet@8000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x08000000 0x1000>; + interrupt-parent = <&irqc1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&ape6evm_fixed_3v3>; + vddvario-supply = <&ape6evm_fixed_1v8>; + }; +}; + &cmt1 { status = "okay"; }; @@ -208,6 +207,12 @@ renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; renesas,function = "sdhi1"; }; + + keyboard_pins: keyboard { + renesas,pins = "PORT324", "PORT325", "PORT326", "PORT327", + "PORT328", "PORT329"; + bias-pull-up; + }; }; &mmcif0 { diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 38136d9f6d95..0fd889f88109 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -9,6 +9,7 @@ * kind, whether express or implied. */ +#include <dt-bindings/clock/r8a73a4-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -27,9 +28,15 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1500000000>; + power-domains = <&pd_a2sl>; }; }; + ptm { + compatible = "arm,coresight-etm3x"; + power-domains = <&pd_d4>; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -41,11 +48,13 @@ dbsc1: memory-controller@e6790000 { compatible = "renesas,dbsc-r8a73a4"; reg = <0 0xe6790000 0 0x10000>; + power-domains = <&pd_a3bc>; }; dbsc2: memory-controller@e67a0000 { compatible = "renesas,dbsc-r8a73a4"; reg = <0 0xe67a0000 0 0x10000>; + power-domains = <&pd_a3bc>; }; dmac: dma-multiplexer { @@ -87,38 +96,19 @@ "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14", "ch15", "ch16", "ch17", "ch18", "ch19"; + clocks = <&mstp2_clks R8A73A4_CLK_DMAC>; + power-domains = <&pd_a3sp>; }; }; - pfc: pfc@e6050000 { - compatible = "renesas,pfc-r8a73a4"; - reg = <0 0xe6050000 0 0x9000>; - gpio-controller; - #gpio-cells = <2>; - interrupts-extended = - <&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>, - <&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>, - <&irqc0 8 0>, <&irqc0 9 0>, <&irqc0 10 0>, <&irqc0 11 0>, - <&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>, - <&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>, - <&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>, - <&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>, - <&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>, - <&irqc1 0 0>, <&irqc1 1 0>, <&irqc1 2 0>, <&irqc1 3 0>, - <&irqc1 4 0>, <&irqc1 5 0>, <&irqc1 6 0>, <&irqc1 7 0>, - <&irqc1 8 0>, <&irqc1 9 0>, <&irqc1 10 0>, <&irqc1 11 0>, - <&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>, - <&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>, - <&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>, - <&irqc1 24 0>, <&irqc1 25 0>; - }; - i2c5: i2c@e60b0000 { #address-cells = <1>; #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x428>; interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A73A4_CLK_IIC5>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -127,6 +117,9 @@ compatible = "renesas,cmt-48-r8a73a4", "renesas,cmt-48-gen2"; reg = <0 0xe6130000 0 0x1004>; interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_CMT1>; + clock-names = "fck"; + power-domains = <&pd_c5>; renesas,channels-mask = <0xff>; @@ -170,6 +163,7 @@ <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>, <0 31 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_c4>; }; irqc1: interrupt-controller@e61c0200 { @@ -203,6 +197,31 @@ <0 55 IRQ_TYPE_LEVEL_HIGH>, <0 56 IRQ_TYPE_LEVEL_HIGH>, <0 57 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_c4>; + }; + + pfc: pfc@e6050000 { + compatible = "renesas,pfc-r8a73a4"; + reg = <0 0xe6050000 0 0x9000>; + gpio-controller; + #gpio-cells = <2>; + interrupts-extended = + <&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>, + <&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>, + <&irqc0 8 0>, <&irqc0 9 0>, <&irqc0 10 0>, <&irqc0 11 0>, + <&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>, + <&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>, + <&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>, + <&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>, + <&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>, + <&irqc1 0 0>, <&irqc1 1 0>, <&irqc1 2 0>, <&irqc1 3 0>, + <&irqc1 4 0>, <&irqc1 5 0>, <&irqc1 6 0>, <&irqc1 7 0>, + <&irqc1 8 0>, <&irqc1 9 0>, <&irqc1 10 0>, <&irqc1 11 0>, + <&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>, + <&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>, + <&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>, + <&irqc1 24 0>, <&irqc1 25 0>; + power-domains = <&pd_c5>; }; thermal@e61f0000 { @@ -210,6 +229,8 @@ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>; + power-domains = <&pd_c5>; }; i2c0: i2c@e6500000 { @@ -218,6 +239,8 @@ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x428>; interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_IIC0>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -227,6 +250,8 @@ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x428>; interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_IIC1>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -236,6 +261,8 @@ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x428>; interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_IIC2>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -245,6 +272,8 @@ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6530000 0 0x428>; interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A73A4_CLK_IIC3>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -254,6 +283,8 @@ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6540000 0 0x428>; interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A73A4_CLK_IIC4>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -263,6 +294,8 @@ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6550000 0 0x428>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_IIC6>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -272,6 +305,8 @@ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6560000 0 0x428>; interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_IIC7>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -281,6 +316,8 @@ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6570000 0 0x428>; interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks R8A73A4_CLK_IIC8>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -288,6 +325,9 @@ compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6c20000 0 0x100>; interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A73A4_CLK_SCIFB0>; + clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -295,6 +335,9 @@ compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6c30000 0 0x100>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A73A4_CLK_SCIFB1>; + clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -302,6 +345,9 @@ compatible = "renesas,scifa-r8a73a4", "renesas,scifa"; reg = <0 0xe6c40000 0 0x100>; interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A73A4_CLK_SCIFA0>; + clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -309,6 +355,9 @@ compatible = "renesas,scifa-r8a73a4", "renesas,scifa"; reg = <0 0xe6c50000 0 0x100>; interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A73A4_CLK_SCIFA1>; + clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -316,6 +365,9 @@ compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6ce0000 0 0x100>; interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A73A4_CLK_SCIFB2>; + clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -323,6 +375,9 @@ compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6cf0000 0 0x100>; interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A73A4_CLK_SCIFB3>; + clock-names = "sci_ick"; + power-domains = <&pd_c4>; status = "disabled"; }; @@ -330,6 +385,8 @@ compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee100000 0 0x100>; interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_SDHI0>; + power-domains = <&pd_a3sp>; cap-sd-highspeed; status = "disabled"; }; @@ -338,6 +395,8 @@ compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee120000 0 0x100>; interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_SDHI1>; + power-domains = <&pd_a3sp>; cap-sd-highspeed; status = "disabled"; }; @@ -346,6 +405,8 @@ compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee140000 0 0x100>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_SDHI2>; + power-domains = <&pd_a3sp>; cap-sd-highspeed; status = "disabled"; }; @@ -354,6 +415,8 @@ compatible = "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>; + power-domains = <&pd_a3sp>; reg-io-width = <4>; status = "disabled"; }; @@ -362,6 +425,8 @@ compatible = "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>; + power-domains = <&pd_a3sp>; reg-io-width = <4>; status = "disabled"; }; @@ -377,4 +442,450 @@ <0 0xf1006000 0 0x2000>; interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + + bsc: bus@fec10000 { + compatible = "renesas,bsc-r8a73a4", "renesas,bsc", + "simple-pm-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + reg = <0 0xfec10000 0 0x400>; + clocks = <&zb_clk>; + power-domains = <&pd_c4>; + }; + + clocks { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* External root clocks */ + extalr_clk: extalr_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "extalr"; + }; + extal1_clk: extal1_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "extal1"; + }; + extal2_clk: extal2_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + clock-output-names = "extal2"; + }; + fsiack_clk: fsiack_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + clock-output-names = "fsiack"; + }; + fsibck_clk: fsibck_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + clock-output-names = "fsibck"; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a73a4-cpg-clocks"; + reg = <0 0xe6150000 0 0x10000>; + clocks = <&extal1_clk>, <&extal2_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0", "pll1", "pll2", + "pll2s", "pll2h", "z", "z2", + "i", "m3", "b", "m1", "m2", + "zx", "zs", "hp"; + }; + + /* Variable factor clocks (DIV6) */ + zb_clk: zb_clk@e6150010 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150010 0 4>; + clocks = <&pll1_div2_clk>, <0>, + <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>; + #clock-cells = <0>; + clock-output-names = "zb"; + }; + sdhi0_clk: sdhi0_clk@e6150074 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150074 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>; + #clock-cells = <0>; + clock-output-names = "sdhi0ck"; + }; + sdhi1_clk: sdhi1_clk@e6150078 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150078 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>; + #clock-cells = <0>; + clock-output-names = "sdhi1ck"; + }; + sdhi2_clk: sdhi2_clk@e615007c { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615007c 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>; + #clock-cells = <0>; + clock-output-names = "sdhi2ck"; + }; + mmc0_clk: mmc0_clk@e6150240 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150240 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>; + #clock-cells = <0>; + clock-output-names = "mmc0"; + }; + mmc1_clk: mmc1_clk@e6150244 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150244 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>; + #clock-cells = <0>; + clock-output-names = "mmc1"; + }; + vclk1_clk: vclk1_clk@e6150008 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150008 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>, <&main_div2_clk>, + <&extalr_clk>, <0>, <0>; + #clock-cells = <0>; + clock-output-names = "vclk1"; + }; + vclk2_clk: vclk2_clk@e615000c { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615000c 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>, <&main_div2_clk>, + <&extalr_clk>, <0>, <0>; + #clock-cells = <0>; + clock-output-names = "vclk2"; + }; + vclk3_clk: vclk3_clk@e615001c { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615001c 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>, <&main_div2_clk>, + <&extalr_clk>, <0>, <0>; + #clock-cells = <0>; + clock-output-names = "vclk3"; + }; + vclk4_clk: vclk4_clk@e6150014 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150014 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>, <&main_div2_clk>, + <&extalr_clk>, <0>, <0>; + #clock-cells = <0>; + clock-output-names = "vclk4"; + }; + vclk5_clk: vclk5_clk@e6150034 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150034 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>, <&main_div2_clk>, + <&extalr_clk>, <0>, <0>; + #clock-cells = <0>; + clock-output-names = "vclk5"; + }; + fsia_clk: fsia_clk@e6150018 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150018 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <&fsiack_clk>, <0>; + #clock-cells = <0>; + clock-output-names = "fsia"; + }; + fsib_clk: fsib_clk@e6150090 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150090 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <&fsibck_clk>, <0>; + #clock-cells = <0>; + clock-output-names = "fsib"; + }; + mp_clk: mp_clk@e6150080 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150080 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <&extal2_clk>, <&extal2_clk>; + #clock-cells = <0>; + clock-output-names = "mp"; + }; + m4_clk: m4_clk@e6150098 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150098 0 4>; + clocks = <&cpg_clocks R8A73A4_CLK_PLL2S>; + #clock-cells = <0>; + clock-output-names = "m4"; + }; + hsi_clk: hsi_clk@e615026c { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615026c 0 4>; + clocks = <&cpg_clocks R8A73A4_CLK_PLL2H>, <&pll1_div2_clk>, + <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>; + #clock-cells = <0>; + clock-output-names = "hsi"; + }; + spuv_clk: spuv_clk@e6150094 { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150094 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <&extal2_clk>, <&extal2_clk>; + #clock-cells = <0>; + clock-output-names = "spuv"; + }; + + /* Fixed factor clocks */ + main_div2_clk: main_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A73A4_CLK_MAIN>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "main_div2"; + }; + pll0_div2_clk: pll0_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A73A4_CLK_PLL0>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "pll0_div2"; + }; + pll1_div2_clk: pll1_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A73A4_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "pll1_div2"; + }; + extal1_div2_clk: extal1_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&extal1_clk>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "extal1_div2"; + }; + + /* Gate clocks */ + mstp2_clks: mstp2_clks@e6150138 { + compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, + <&mp_clk>, <&mp_clk>, <&cpg_clocks R8A73A4_CLK_HP>; + #clock-cells = <1>; + clock-indices = < + R8A73A4_CLK_SCIFA0 R8A73A4_CLK_SCIFA1 + R8A73A4_CLK_SCIFB0 R8A73A4_CLK_SCIFB1 + R8A73A4_CLK_SCIFB2 R8A73A4_CLK_SCIFB3 + R8A73A4_CLK_DMAC + >; + clock-output-names = + "scifa0", "scifa1", "scifb0", "scifb1", + "scifb2", "scifb3", "dmac"; + }; + mstp3_clks: mstp3_clks@e615013c { + compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; + clocks = <&cpg_clocks R8A73A4_CLK_HP>, <&mmc1_clk>, + <&sdhi2_clk>, <&sdhi1_clk>, <&sdhi0_clk>, + <&mmc0_clk>, <&cpg_clocks R8A73A4_CLK_HP>, + <&cpg_clocks R8A73A4_CLK_HP>, <&cpg_clocks + R8A73A4_CLK_HP>, <&cpg_clocks + R8A73A4_CLK_HP>, <&extalr_clk>; + #clock-cells = <1>; + clock-indices = < + R8A73A4_CLK_IIC2 R8A73A4_CLK_MMCIF1 + R8A73A4_CLK_SDHI2 R8A73A4_CLK_SDHI1 + R8A73A4_CLK_SDHI0 R8A73A4_CLK_MMCIF0 + R8A73A4_CLK_IIC6 R8A73A4_CLK_IIC7 + R8A73A4_CLK_IIC0 R8A73A4_CLK_IIC1 + R8A73A4_CLK_CMT1 + >; + clock-output-names = + "iic2", "mmcif1", "sdhi2", "sdhi1", "sdhi0", + "mmcif0", "iic6", "iic7", "iic0", "iic1", + "cmt1"; + }; + mstp4_clks: mstp4_clks@e6150140 { + compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; + clocks = <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_HP>, + <&cpg_clocks R8A73A4_CLK_HP>; + #clock-cells = <1>; + clock-indices = < + R8A73A4_CLK_IIC5 R8A73A4_CLK_IIC4 + R8A73A4_CLK_IIC3 + >; + clock-output-names = + "iic5", "iic4", "iic3"; + }; + mstp5_clks: mstp5_clks@e6150144 { + compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; + clocks = <&extal2_clk>, <&cpg_clocks R8A73A4_CLK_HP>; + #clock-cells = <1>; + clock-indices = < + R8A73A4_CLK_THERMAL R8A73A4_CLK_IIC8 + >; + clock-output-names = + "thermal", "iic8"; + }; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,sysc-r8a73a4", "renesas,sysc-rmobile"; + reg = <0 0xe6180000 0 0x8000>, <0 0xe6188000 0 0x8000>; + + pm-domains { + pd_c5: c5 { + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_c4: c4@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3sg: a3sg@16 { + reg = <16>; + #power-domain-cells = <0>; + }; + + pd_a3ex: a3ex@17 { + reg = <17>; + #power-domain-cells = <0>; + }; + + pd_a3sp: a3sp@18 { + reg = <18>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a2us: a2us@19 { + reg = <19>; + #power-domain-cells = <0>; + }; + }; + + pd_a3sm: a3sm@20 { + reg = <20>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a2sl: a2sl@21 { + reg = <21>; + #power-domain-cells = <0>; + }; + }; + + pd_a3km: a3km@22 { + reg = <22>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a2kl: a2kl@23 { + reg = <23>; + #power-domain-cells = <0>; + }; + }; + }; + + pd_c4ma: c4ma@1 { + reg = <1>; + #power-domain-cells = <0>; + }; + + pd_c4cl: c4cl@2 { + reg = <2>; + #power-domain-cells = <0>; + }; + + pd_d4: d4@3 { + reg = <3>; + #power-domain-cells = <0>; + }; + + pd_a4bc: a4bc@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3bc: a3bc@5 { + reg = <5>; + #power-domain-cells = <0>; + }; + }; + + pd_a4l: a4l@6 { + reg = <6>; + #power-domain-cells = <0>; + }; + + pd_a4lc: a4lc@7 { + reg = <7>; + #power-domain-cells = <0>; + }; + + pd_a4mp: a4mp@8 { + reg = <8>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3mp: a3mp@9 { + reg = <9>; + #power-domain-cells = <0>; + }; + + pd_a3vc: a3vc@10 { + reg = <10>; + #power-domain-cells = <0>; + }; + }; + + pd_a4sf: a4sf@11 { + reg = <11>; + #power-domain-cells = <0>; + }; + + pd_a3r: a3r@12 { + reg = <12>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a2rv: a2rv@13 { + reg = <13>; + #power-domain-cells = <0>; + }; + + pd_a2is: a2is@14 { + reg = <14>; + #power-domain-cells = <0>; + }; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 8a092605d641..83c1c3ca1b8f 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -431,6 +431,18 @@ clock-frequency = <27000000>; clock-output-names = "dv"; }; + fmsick_clk: fmsick_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "fmsick"; + }; + fmsock_clk: fmsock_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "fmsock"; + }; fsiack_clk: fsiack_clk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -459,13 +471,78 @@ }; /* Variable factor clocks (DIV6) */ + vclk1_clk: vclk1_clk@e6150008 { + compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150008 4>; + clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>, + <&cpg_clocks R8A7740_CLK_USB24S>, + <&extal1_div2_clk>, <&extalr_clk>, <0>, + <0>; + #clock-cells = <0>; + clock-output-names = "vclk1"; + }; + vclk2_clk: vclk2_clk@e615000c { + compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe615000c 4>; + clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>, + <&cpg_clocks R8A7740_CLK_USB24S>, + <&extal1_div2_clk>, <&extalr_clk>, <0>, + <0>; + #clock-cells = <0>; + clock-output-names = "vclk2"; + }; + fmsi_clk: fmsi_clk@e6150010 { + compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150010 4>; + clocks = <&pllc1_div2_clk>, <&fmsick_clk>, <0>, <0>; + #clock-cells = <0>; + clock-output-names = "fmsi"; + }; + fmso_clk: fmso_clk@e6150014 { + compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150014 4>; + clocks = <&pllc1_div2_clk>, <&fmsock_clk>, <0>, <0>; + #clock-cells = <0>; + clock-output-names = "fmso"; + }; + fsia_clk: fsia_clk@e6150018 { + compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150018 4>; + clocks = <&pllc1_div2_clk>, <&fsiack_clk>, <0>, <0>; + #clock-cells = <0>; + clock-output-names = "fsia"; + }; sub_clk: sub_clk@e6150080 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150080 4>; - clocks = <&pllc1_div2_clk>; + clocks = <&pllc1_div2_clk>, + <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>; #clock-cells = <0>; clock-output-names = "sub"; }; + spu_clk: spu_clk@e6150084 { + compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150084 4>; + clocks = <&pllc1_div2_clk>, + <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>; + #clock-cells = <0>; + clock-output-names = "spu"; + }; + vou_clk: vou_clk@e6150088 { + compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150088 4>; + clocks = <&pllc1_div2_clk>, <&extal1_clk>, <&dv_clk>, + <0>; + #clock-cells = <0>; + clock-output-names = "vou"; + }; + stpro_clk: stpro_clk@e615009c { + compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe615009c 4>; + clocks = <&cpg_clocks R8A7740_CLK_PLLC0>; + #clock-cells = <0>; + clock-output-names = "stpro"; + }; /* Fixed factor clocks */ pllc1_div2_clk: pllc1_div2_clk { diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index 46a884d45175..787fa6f9f46d 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -16,17 +16,191 @@ /dts-v1/; #include "r8a7778.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "bockw"; compatible = "renesas,bockw", "renesas,r8a7778"; + aliases { + serial0 = &scif0; + }; + chosen { bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs rw"; + stdout-path = &scif0; }; memory { device_type = "memory"; reg = <0x60000000 0x10000000>; }; + + fixedregulator3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4643>; + system-clock-frequency = <11289600>; + }; + }; +}; + +&bsc { + ethernet@18300000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x18300000 0x1000>; + + phy-mode = "mii"; + interrupt-parent = <&irqpin>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + reg-io-width = <4>; + vddvario-supply = <&fixedregulator3v3>; + vdd33a-supply = <&fixedregulator3v3>; + }; +}; + +&extal_clk { + clock-frequency = <33333333>; +}; + +&i2c0 { + status = "okay"; + + ak4643: sound-codec@12 { + compatible = "asahi-kasei,ak4643"; + #sound-dai-cells = <0>; + reg = <0x12>; + }; + + camera@41 { + compatible = "oki,ml86v7667"; + reg = <0x41>; + }; + + camera@43 { + compatible = "oki,ml86v7667"; + reg = <0x43>; + }; + + rx8581: rtc@51 { + compatible = "epson,rx8581"; + reg = <0x51>; + }; +}; + +&mmcif { + pinctrl-0 = <&mmc_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&fixedregulator3v3>; + bus-width = <8>; + broken-cd; + status = "okay"; +}; + +&irqpin { + status = "okay"; +}; + +&tmu0 { + status = "okay"; +}; + +&pfc { + scif0_pins: serial0 { + renesas,groups = "scif0_data_a", "scif0_ctrl"; + renesas,function = "scif0"; + }; + + mmc_pins: mmc { + renesas,groups = "mmc_data8", "mmc_ctrl"; + renesas,function = "mmc"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", + "sdhi0_cd"; + renesas,function = "sdhi0"; + }; + + hspi0_pins: hspi0 { + renesas,groups = "hspi0_a"; + renesas,function = "hspi0"; + }; + + usb0_pins: usb0 { + renesas,groups = "usb0"; + renesas,function = "usb0"; + }; + + usb1_pins: usb1 { + renesas,groups = "usb1"; + renesas,function = "usb1"; + }; + + vin0_pins: vin0 { + renesas,groups = "vin0_data8", "vin0_clk"; + renesas,function = "vin0"; + }; + + vin1_pins: vin1 { + renesas,groups = "vin1_data8", "vin1_clk"; + renesas,function = "vin1"; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&fixedregulator3v3>; + bus-width = <4>; + status = "okay"; + wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; +}; + +&hspi0 { + pinctrl-0 = <&hspi0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl008k"; + reg = <0>; + spi-max-frequency = <104000000>; + m25p,fast-read; + + partition@0 { + label = "data(spi)"; + reg = <0x00000000 0x00100000>; + }; + }; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index ef8533910029..868f97309533 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -16,6 +16,7 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/clock/r8a7778-clock.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -40,6 +41,24 @@ spi2 = &hspi2; }; + bsc: bus@1c000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1c000000>; + }; + + ether: ethernet@fde00000 { + compatible = "renesas,ether-r8a7778"; + reg = <0xfde00000 0x400>; + interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7778_CLK_ETHER>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@fe438000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -132,6 +151,7 @@ compatible = "renesas,i2c-r8a7778"; reg = <0xffc70000 0x1000>; interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_I2C0>; status = "disabled"; }; @@ -141,6 +161,7 @@ compatible = "renesas,i2c-r8a7778"; reg = <0xffc71000 0x1000>; interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_I2C1>; status = "disabled"; }; @@ -150,6 +171,7 @@ compatible = "renesas,i2c-r8a7778"; reg = <0xffc72000 0x1000>; interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_I2C2>; status = "disabled"; }; @@ -159,6 +181,7 @@ compatible = "renesas,i2c-r8a7778"; reg = <0xffc73000 0x1000>; interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_I2C3>; status = "disabled"; }; @@ -168,6 +191,8 @@ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, <0 33 IRQ_TYPE_LEVEL_HIGH>, <0 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_TMU0>; + clock-names = "fck"; #renesas,channels = <3>; @@ -180,6 +205,8 @@ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>, <0 37 IRQ_TYPE_LEVEL_HIGH>, <0 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_TMU1>; + clock-names = "fck"; #renesas,channels = <3>; @@ -192,16 +219,75 @@ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>, <0 41 IRQ_TYPE_LEVEL_HIGH>, <0 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_TMU2>; + clock-names = "fck"; #renesas,channels = <3>; status = "disabled"; }; + rcar_sound: sound@ffd90000 { + #sound-dai-cells = <1>; + compatible = "renesas,rcar_sound-r8a7778", "renesas,rcar_sound-gen1"; + reg = <0xffd90000 0x1000>, /* SRU */ + <0xffd91000 0x1240>, /* SSI */ + <0xfffe0000 0x24>; /* ADG */ + clocks = <&mstp3_clks R8A7778_CLK_SSI8>, + <&mstp3_clks R8A7778_CLK_SSI7>, + <&mstp3_clks R8A7778_CLK_SSI6>, + <&mstp3_clks R8A7778_CLK_SSI5>, + <&mstp3_clks R8A7778_CLK_SSI4>, + <&mstp0_clks R8A7778_CLK_SSI3>, + <&mstp0_clks R8A7778_CLK_SSI2>, + <&mstp0_clks R8A7778_CLK_SSI1>, + <&mstp0_clks R8A7778_CLK_SSI0>, + <&mstp5_clks R8A7778_CLK_SRU_SRC8>, + <&mstp5_clks R8A7778_CLK_SRU_SRC7>, + <&mstp5_clks R8A7778_CLK_SRU_SRC6>, + <&mstp5_clks R8A7778_CLK_SRU_SRC5>, + <&mstp5_clks R8A7778_CLK_SRU_SRC4>, + <&mstp5_clks R8A7778_CLK_SRU_SRC3>, + <&mstp5_clks R8A7778_CLK_SRU_SRC2>, + <&mstp5_clks R8A7778_CLK_SRU_SRC1>, + <&mstp5_clks R8A7778_CLK_SRU_SRC0>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, + <&cpg_clocks R8A7778_CLK_S1>; + clock-names = "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", + "ssi.3", "ssi.2", "ssi.1", "ssi.0", + "src.8", "src.7", "src.6", "src.5", "src.4", + "src.3", "src.2", "src.1", "src.0", + "clk_a", "clk_b", "clk_c", "clk_i"; + + status = "disabled"; + + rcar_sound,src { + src3: src@3 { }; + src4: src@4 { }; + src5: src@5 { }; + src6: src@6 { }; + src7: src@7 { }; + src8: src@8 { }; + src9: src@9 { }; + }; + + rcar_sound,ssi { + ssi3: ssi@3 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; }; + ssi4: ssi@4 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; }; + ssi5: ssi@5 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi6: ssi@6 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi7: ssi@7 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi8: ssi@8 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi9: ssi@9 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + }; + }; + scif0: serial@ffe40000 { compatible = "renesas,scif-r8a7778", "renesas,scif"; reg = <0xffe40000 0x100>; interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF0>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -209,6 +295,8 @@ compatible = "renesas,scif-r8a7778", "renesas,scif"; reg = <0xffe41000 0x100>; interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF1>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -216,6 +304,8 @@ compatible = "renesas,scif-r8a7778", "renesas,scif"; reg = <0xffe42000 0x100>; interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF2>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -223,6 +313,8 @@ compatible = "renesas,scif-r8a7778", "renesas,scif"; reg = <0xffe43000 0x100>; interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF3>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -230,6 +322,8 @@ compatible = "renesas,scif-r8a7778", "renesas,scif"; reg = <0xffe44000 0x100>; interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF4>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -237,6 +331,8 @@ compatible = "renesas,scif-r8a7778", "renesas,scif"; reg = <0xffe45000 0x100>; interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF5>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -244,6 +340,7 @@ compatible = "renesas,sh-mmcif"; reg = <0xffe4e000 0x100>; interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7778_CLK_MMC>; status = "disabled"; }; @@ -251,6 +348,7 @@ compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4c000 0x100>; interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7778_CLK_SDHI0>; status = "disabled"; }; @@ -258,6 +356,7 @@ compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4d000 0x100>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7778_CLK_SDHI1>; status = "disabled"; }; @@ -265,6 +364,7 @@ compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4f000 0x100>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7778_CLK_SDHI2>; status = "disabled"; }; @@ -272,6 +372,7 @@ compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc7000 0x18>; interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_HSPI>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -281,6 +382,7 @@ compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc8000 0x18>; interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_HSPI>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -290,8 +392,199 @@ compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc6000 0x18>; interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_HSPI>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* External input clock */ + extal_clk: extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "extal"; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@ffc80000 { + compatible = "renesas,r8a7778-cpg-clocks"; + reg = <0xffc80000 0x80>; + #clock-cells = <1>; + clocks = <&extal_clk>; + clock-output-names = "plla", "pllb", "b", + "out", "p", "s", "s1"; + }; + + /* Audio clocks; frequencies are set by boards if applicable. */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "audio_clk_a"; + }; + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "audio_clk_b"; + }; + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "audio_clk_c"; + }; + + /* Fixed ratio clocks */ + g_clk: g_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7778_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "g"; + }; + i_clk: i_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7778_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "i"; + }; + s3_clk: s3_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7778_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "s3"; + }; + s4_clk: s4_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7778_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "s4"; + }; + z_clk: z_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7778_CLK_PLLB>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "z"; + }; + + /* Gate clocks */ + mstp0_clks: mstp0_clks@ffc80030 { + compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xffc80030 4>; + clocks = <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_S>; + #clock-cells = <1>; + clock-indices = < + R8A7778_CLK_I2C0 R8A7778_CLK_I2C1 + R8A7778_CLK_I2C2 R8A7778_CLK_I2C3 + R8A7778_CLK_SCIF0 R8A7778_CLK_SCIF1 + R8A7778_CLK_SCIF2 R8A7778_CLK_SCIF3 + R8A7778_CLK_SCIF4 R8A7778_CLK_SCIF5 + R8A7778_CLK_TMU0 R8A7778_CLK_TMU1 + R8A7778_CLK_TMU2 R8A7778_CLK_SSI0 + R8A7778_CLK_SSI1 R8A7778_CLK_SSI2 + R8A7778_CLK_SSI3 R8A7778_CLK_SRU + R8A7778_CLK_HSPI + >; + clock-output-names = + "i2c0", "i2c1", "i2c2", "i2c3", "scif0", + "scif1", "scif2", "scif3", "scif4", "scif5", + "tmu0", "tmu1", "tmu2", "ssi0", "ssi1", + "ssi2", "ssi3", "sru", "hspi"; + }; + mstp1_clks: mstp1_clks@ffc80034 { + compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xffc80034 4>, <0xffc80044 4>; + clocks = <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_S>, + <&cpg_clocks R8A7778_CLK_S>, + <&cpg_clocks R8A7778_CLK_P>; + #clock-cells = <1>; + clock-indices = < + R8A7778_CLK_ETHER R8A7778_CLK_VIN0 + R8A7778_CLK_VIN1 R8A7778_CLK_USB + >; + clock-output-names = + "ether", "vin0", "vin1", "usb"; + }; + mstp3_clks: mstp3_clks@ffc8003c { + compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xffc8003c 4>; + clocks = <&s4_clk>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>; + #clock-cells = <1>; + clock-indices = < + R8A7778_CLK_MMC R8A7778_CLK_SDHI0 + R8A7778_CLK_SDHI1 R8A7778_CLK_SDHI2 + R8A7778_CLK_SSI4 R8A7778_CLK_SSI5 + R8A7778_CLK_SSI6 R8A7778_CLK_SSI7 + R8A7778_CLK_SSI8 + >; + clock-output-names = + "mmc", "sdhi0", "sdhi1", "sdhi2", "ssi4", + "ssi5", "ssi6", "ssi7", "ssi8"; + }; + mstp5_clks: mstp5_clks@ffc80054 { + compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xffc80054 4>; + clocks = <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_P>; + #clock-cells = <1>; + clock-indices = < + R8A7778_CLK_SRU_SRC0 R8A7778_CLK_SRU_SRC1 + R8A7778_CLK_SRU_SRC2 R8A7778_CLK_SRU_SRC3 + R8A7778_CLK_SRU_SRC4 R8A7778_CLK_SRU_SRC5 + R8A7778_CLK_SRU_SRC6 R8A7778_CLK_SRU_SRC7 + R8A7778_CLK_SRU_SRC8 + >; + clock-output-names = + "sru-src0", "sru-src1", "sru-src2", + "sru-src3", "sru-src4", "sru-src5", + "sru-src6", "sru-src7", "sru-src8"; + }; + }; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index e83d40e24bcd..540756cdf391 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -122,6 +122,12 @@ }; }; }; + + x3_clk: x3-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <65000000>; + }; }; &du { @@ -129,6 +135,9 @@ pinctrl-names = "default"; status = "okay"; + clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>; + clock-names = "du", "dclkin.0"; + ports { port@0 { endpoint { diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 0c3b6783b72a..aaa4f258e279 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -222,6 +222,29 @@ }; }; }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + x2_clk: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; + + x13_clk: x13-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; }; &du { @@ -229,12 +252,26 @@ pinctrl-names = "default"; status = "okay"; + clocks = <&mstp7_clks R8A7790_CLK_DU0>, + <&mstp7_clks R8A7790_CLK_DU1>, + <&mstp7_clks R8A7790_CLK_DU2>, + <&mstp7_clks R8A7790_CLK_LVDS0>, + <&mstp7_clks R8A7790_CLK_LVDS1>, + <&x13_clk>, <&x2_clk>; + clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1", + "dclkin.0", "dclkin.1"; + ports { port@0 { endpoint { remote-endpoint = <&adv7123_in>; }; }; + port@1 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; port@2 { lvds_connector: endpoint { }; @@ -506,6 +543,38 @@ }; }; }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; }; &iic3 { @@ -513,9 +582,27 @@ pinctrl-0 = <&iic3_pins>; status = "okay"; + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; + vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 4b38fc920114..4bb2f4c17321 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1,6 +1,7 @@ /* * Device Tree Source for the r8a7790 SoC * + * Copyright (C) 2015 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded Inc. * @@ -369,13 +370,6 @@ dma-channels = <13>; }; - audmapp: dma-controller@ec740000 { - compatible = "renesas,rcar-audmapp"; - #dma-cells = <1>; - - reg = <0 0xec740000 0 0x200>; - }; - i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; @@ -493,17 +487,21 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7790"; - reg = <0 0xee100000 0 0x200>; + reg = <0 0xee100000 0 0x328>; interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; + dmas = <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx"; status = "disabled"; }; sdhi1: sd@ee120000 { compatible = "renesas,sdhi-r8a7790"; - reg = <0 0xee120000 0 0x200>; + reg = <0 0xee120000 0 0x328>; interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI1>; + dmas = <&dmac1 0xc9>, <&dmac1 0xca>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -512,6 +510,8 @@ reg = <0 0xee140000 0 0x100>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; + dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -520,6 +520,8 @@ reg = <0 0xee160000 0 0x100>; interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI3>; + dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -792,6 +794,26 @@ }; }; + can0: can@e6e80000 { + compatible = "renesas,can-r8a7790"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7790_CLK_RCAN0>, + <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + status = "disabled"; + }; + + can1: can@e6e88000 { + compatible = "renesas,can-r8a7790"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7790_CLK_RCAN1>, + <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -838,16 +860,34 @@ clock-output-names = "audio_clk_c"; }; + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + clock-output-names = "usb_extal"; + }; + + /* External CAN clock */ + can_clk: can_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + clock-output-names = "can_clk"; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7790-cpg-clocks", "renesas,rcar-gen2-cpg-clocks"; reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>; + clocks = <&extal_clk &usb_extal_clk>; #clock-cells = <1>; clock-output-names = "main", "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", - "z"; + "z", "rcan", "adsp"; }; /* Variable factor clocks */ @@ -1121,18 +1161,21 @@ mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; - clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>; + clocks = <&hp_clk>, <&hp_clk>, <&cpg_clocks R8A7790_CLK_ADSP>, + <&extal_clk>, <&p_clk>; #clock-cells = <1>; clock-indices = < R8A7790_CLK_AUDIO_DMAC0 R8A7790_CLK_AUDIO_DMAC1 - R8A7790_CLK_THERMAL R8A7790_CLK_PWM + R8A7790_CLK_ADSP_MOD R8A7790_CLK_THERMAL + R8A7790_CLK_PWM >; - clock-output-names = "audmac0", "audmac1", "thermal", "pwm"; + clock-output-names = "audmac0", "audmac1", "adsp_mod", + "thermal", "pwm"; }; mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, + clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>; #clock-cells = <1>; @@ -1410,7 +1453,10 @@ reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x1280>; /* SSI */ + <0 0xec541000 0 0x1280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>, <&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>, @@ -1435,34 +1481,171 @@ status = "disabled"; rcar_sound,dvc { - dvc0: dvc@0 { }; - dvc1: dvc@1 { }; + dvc0: dvc@0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc@1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; }; rcar_sound,src { - src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; }; - src1: src@1 { interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; }; - src2: src@2 { interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; }; - src3: src@3 { interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; }; - src4: src@4 { interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; }; - src5: src@5 { interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; }; - src6: src@6 { interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; }; - src7: src@7 { interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; }; - src8: src@8 { interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; }; - src9: src@9 { interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; }; + src0: src@0 { + interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src@1 { + interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src@2 { + interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src@3 { + interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src@4 { + interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src@5 { + interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src@6 { + interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src@7 { + interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src@8 { + interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src@9 { + interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; }; rcar_sound,ssi { - ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; }; - ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; }; - ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; }; - ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; }; - ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; }; - ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; }; - ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; }; - ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; }; - ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; }; - ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; }; + ssi0: ssi@0 { + interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi@1 { + interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi@2 { + interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi@3 { + interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi@4 { + interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi@5 { + interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi@6 { + interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi@7 { + interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi@8 { + interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi@9 { + interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; }; }; + + ipmmu_sy0: mmu@e6280000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe6280000 0 0x1000>; + interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, + <0 224 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_sy1: mmu@e6290000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe6290000 0 0x1000>; + interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ds: mmu@e6740000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe6740000 0 0x1000>; + interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, + <0 199 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mp: mmu@ec680000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xec680000 0 0x1000>; + interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mx: mmu@fe951000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xfe951000 0 0x1000>; + interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, + <0 221 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xffc80000 0 0x1000>; + interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index d2ebf11f9881..e33e4047b0b0 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -141,6 +141,11 @@ renesas,groups = "vin0_data8", "vin0_clk"; renesas,function = "vin0"; }; + + can0_pins: can0 { + renesas,groups = "can0_data"; + renesas,function = "can0"; + }; }; &scif0 { @@ -307,3 +312,9 @@ }; }; }; + +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index a3c27807f6c5..74c3212f1f11 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -258,6 +258,29 @@ system-clock-frequency = <11289600>; }; }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + x2_clk: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; + + x13_clk: x13-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; }; &du { @@ -265,7 +288,19 @@ pinctrl-names = "default"; status = "okay"; + clocks = <&mstp7_clks R8A7791_CLK_DU0>, + <&mstp7_clks R8A7791_CLK_DU1>, + <&mstp7_clks R8A7791_CLK_LVDS0>, + <&x13_clk>, <&x2_clk>; + clock-names = "du.0", "du.1", "lvds.0", + "dclkin.0", "dclkin.1"; + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; port@1 { lvds_connector: endpoint { }; @@ -284,7 +319,7 @@ }; du_pins: du { - renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0"; + renesas,groups = "du_rgb666", "du_sync", "du_disp", "du_clk_out_0"; renesas,function = "du"; }; @@ -506,6 +541,38 @@ }; }; + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + eeprom@50 { compatible = "renesas,24c02"; reg = <0x50>; @@ -517,9 +584,27 @@ status = "okay"; clock-frequency = <100000>; + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; + vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index e35812a0d8d4..4696062f6dde 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for the r8a7791 SoC * - * Copyright (C) 2013-2014 Renesas Electronics Corporation + * Copyright (C) 2013-2015 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded Inc. * @@ -357,13 +357,6 @@ dma-channels = <13>; }; - audmapp: dma-controller@ec740000 { - compatible = "renesas,rcar-audmapp"; - #dma-cells = <1>; - - reg = <0 0xec740000 0 0x200>; - }; - /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { #address-cells = <1>; @@ -482,9 +475,11 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7791"; - reg = <0 0xee100000 0 0x200>; + reg = <0 0xee100000 0 0x328>; interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI0>; + dmas = <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -493,6 +488,8 @@ reg = <0 0xee140000 0 0x100>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI1>; + dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -501,6 +498,8 @@ reg = <0 0xee160000 0 0x100>; interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI2>; + dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -816,6 +815,26 @@ }; }; + can0: can@e6e80000 { + compatible = "renesas,can-r8a7791"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7791_CLK_RCAN0>, + <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + status = "disabled"; + }; + + can1: can@e6e88000 { + compatible = "renesas,can-r8a7791"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7791_CLK_RCAN1>, + <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -862,31 +881,50 @@ status = "disabled"; }; + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + clock-output-names = "usb_extal"; + }; + + /* External CAN clock */ + can_clk: can_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + clock-output-names = "can_clk"; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7791-cpg-clocks", "renesas,rcar-gen2-cpg-clocks"; reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>; + clocks = <&extal_clk &usb_extal_clk>; #clock-cells = <1>; clock-output-names = "main", "pll0", "pll1", "pll3", - "lb", "qspi", "sdh", "sd0", "z"; + "lb", "qspi", "sdh", "sd0", "z", + "rcan", "adsp"; }; /* Variable factor clocks */ - sd1_clk: sd2_clk@e6150078 { + sd2_clk: sd2_clk@e6150078 { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd1"; + clock-output-names = "sd2"; }; - sd2_clk: sd3_clk@e615026c { + sd3_clk: sd3_clk@e615026c { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd2"; + clock-output-names = "sd3"; }; mmc0_clk: mmc0_clk@e6150240 { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; @@ -1107,7 +1145,7 @@ mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>, + clocks = <&cp_clk>, <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7791_CLK_SD0>, <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; @@ -1125,18 +1163,21 @@ mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; - clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>; + clocks = <&hp_clk>, <&hp_clk>, <&cpg_clocks R8A7791_CLK_ADSP>, + <&extal_clk>, <&p_clk>; #clock-cells = <1>; clock-indices = < R8A7791_CLK_AUDIO_DMAC0 R8A7791_CLK_AUDIO_DMAC1 - R8A7791_CLK_THERMAL R8A7791_CLK_PWM + R8A7791_CLK_ADSP_MOD R8A7791_CLK_THERMAL + R8A7791_CLK_PWM >; - clock-output-names = "audmac0", "audmac1", "thermal", "pwm"; + clock-output-names = "audmac0", "audmac1", "adsp_mod", + "thermal", "pwm"; }; mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&mp_clk>, <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, + clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>; #clock-cells = <1>; @@ -1154,7 +1195,7 @@ mstp8_clks: mstp8_clks@e6150990 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&zg_clk>, <&hp_clk>, <&zg_clk>, <&zg_clk>, + clocks = <&zx_clk>, <&hp_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; clock-indices = < @@ -1384,6 +1425,66 @@ status = "disabled"; }; + ipmmu_sy0: mmu@e6280000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe6280000 0 0x1000>; + interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, + <0 224 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_sy1: mmu@e6290000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe6290000 0 0x1000>; + interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ds: mmu@e6740000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe6740000 0 0x1000>; + interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, + <0 199 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mp: mmu@ec680000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xec680000 0 0x1000>; + interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mx: mmu@fe951000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xfe951000 0 0x1000>; + interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, + <0 221 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xffc80000 0 0x1000>; + interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_gp: mmu@e62a0000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe62a0000 0 0x1000>; + interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>, + <0 261 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + rcar_sound: rcar_sound@ec500000 { /* * #sound-dai-cells is required @@ -1395,7 +1496,10 @@ reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x1280>; /* SSI */ + <0 0xec541000 0 0x1280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + clocks = <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI9>, <&mstp10_clks R8A7791_CLK_SSI8>, <&mstp10_clks R8A7791_CLK_SSI7>, <&mstp10_clks R8A7791_CLK_SSI6>, @@ -1420,34 +1524,120 @@ status = "disabled"; rcar_sound,dvc { - dvc0: dvc@0 { }; - dvc1: dvc@1 { }; + dvc0: dvc@0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc@1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; }; rcar_sound,src { - src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; }; - src1: src@1 { interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; }; - src2: src@2 { interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; }; - src3: src@3 { interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; }; - src4: src@4 { interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; }; - src5: src@5 { interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; }; - src6: src@6 { interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; }; - src7: src@7 { interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; }; - src8: src@8 { interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; }; - src9: src@9 { interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; }; + src0: src@0 { + interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src@1 { + interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src@2 { + interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src@3 { + interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src@4 { + interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src@5 { + interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src@6 { + interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src@7 { + interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src@8 { + interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src@9 { + interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; }; rcar_sound,ssi { - ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; }; - ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; }; - ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; }; - ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; }; - ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; }; - ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; }; - ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; }; - ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; }; - ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; }; - ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; }; + ssi0: ssi@0 { + interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi@1 { + interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi@2 { + interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi@3 { + interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi@4 { + interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi@5 { + interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi@6 { + interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi@7 { + interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi@8 { + interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi@9 { + interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; }; }; }; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 0d848e605071..928cfa641475 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -43,6 +43,19 @@ status = "okay"; }; +ðer { + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc0>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; + &scif2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 8f78da5ef10b..7a3ffa51a8bf 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -107,6 +107,66 @@ <0 17 IRQ_TYPE_LEVEL_HIGH>; }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH + 0 200 IRQ_TYPE_LEVEL_HIGH + 0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH + 0 205 IRQ_TYPE_LEVEL_HIGH + 0 206 IRQ_TYPE_LEVEL_HIGH + 0 207 IRQ_TYPE_LEVEL_HIGH + 0 208 IRQ_TYPE_LEVEL_HIGH + 0 209 IRQ_TYPE_LEVEL_HIGH + 0 210 IRQ_TYPE_LEVEL_HIGH + 0 211 IRQ_TYPE_LEVEL_HIGH + 0 212 IRQ_TYPE_LEVEL_HIGH + 0 213 IRQ_TYPE_LEVEL_HIGH + 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC0>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH + 0 216 IRQ_TYPE_LEVEL_HIGH + 0 217 IRQ_TYPE_LEVEL_HIGH + 0 218 IRQ_TYPE_LEVEL_HIGH + 0 219 IRQ_TYPE_LEVEL_HIGH + 0 308 IRQ_TYPE_LEVEL_HIGH + 0 309 IRQ_TYPE_LEVEL_HIGH + 0 310 IRQ_TYPE_LEVEL_HIGH + 0 311 IRQ_TYPE_LEVEL_HIGH + 0 312 IRQ_TYPE_LEVEL_HIGH + 0 313 IRQ_TYPE_LEVEL_HIGH + 0 314 IRQ_TYPE_LEVEL_HIGH + 0 315 IRQ_TYPE_LEVEL_HIGH + 0 316 IRQ_TYPE_LEVEL_HIGH + 0 317 IRQ_TYPE_LEVEL_HIGH + 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC1>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7794", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; @@ -269,6 +329,41 @@ status = "disabled"; }; + ether: ethernet@ee700000 { + compatible = "renesas,ether-r8a7794"; + reg = <0 0xee700000 0 0x400>; + interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7794_CLK_ETHER>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7794"; + reg = <0 0xee100000 0 0x200>; + interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7794_CLK_SDHI0>; + status = "disabled"; + }; + + sdhi1: sd@ee140000 { + compatible = "renesas,sdhi-r8a7794"; + reg = <0 0xee140000 0 0x100>; + interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7794_CLK_SDHI1>; + status = "disabled"; + }; + + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a7794"; + reg = <0 0xee160000 0 0x100>; + interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7794_CLK_SDHI2>; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -294,19 +389,19 @@ "lb", "qspi", "sdh", "sd0", "z"; }; /* Variable factor clocks */ - sd1_clk: sd2_clk@e6150078 { + sd2_clk: sd2_clk@e6150078 { compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd1"; + clock-output-names = "sd2"; }; - sd2_clk: sd3_clk@e615007c { + sd3_clk: sd3_clk@e615026c { compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe615007c 0 4>; + reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd2"; + clock-output-names = "sd3"; }; mmc0_clk: mmc0_clk@e6150240 { compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; @@ -518,7 +613,7 @@ mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7794_CLK_SD0>, + clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>, <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; clock-indices = < @@ -585,4 +680,54 @@ clock-output-names = "scifa3", "scifa4", "scifa5"; }; }; + + ipmmu_sy0: mmu@e6280000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe6280000 0 0x1000>; + interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, + <0 224 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_sy1: mmu@e6290000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe6290000 0 0x1000>; + interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ds: mmu@e6740000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe6740000 0 0x1000>; + interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, + <0 199 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + }; + + ipmmu_mp: mmu@ec680000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xec680000 0 0x1000>; + interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mx: mmu@fe951000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xfe951000 0 0x1000>; + interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, + <0 221 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + }; + + ipmmu_gp: mmu@e62a0000 { + compatible = "renesas,ipmmu-vmsa"; + reg = <0 0xe62a0000 0 0x1000>; + interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>, + <0 261 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 9a09579b8309..bdf85701987d 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -103,6 +103,14 @@ regulator-always-on; regulator-boot-on; }; + + vsys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; }; &emac { @@ -148,6 +156,14 @@ pinctrl-names = "default"; pinctrl-0 = <&act8846_dvs0_ctl>; + vp1-supply = <&vsys>; + vp2-supply = <&vsys>; + vp3-supply = <&vsys>; + vp4-supply = <&vsys>; + inl1-supply = <&vcc_io>; + inl2-supply = <&vsys>; + inl3-supply = <&vsys>; + regulators { vcc_ddr: REG1 { regulator-name = "VCC_DDR"; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index d7b8bbc0c25f..1687e8336994 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -33,6 +33,7 @@ regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; + vin-supply = <&vcc_sys>; }; vdd_gpu: syr828@41 { @@ -43,6 +44,7 @@ regulator-min-microvolt = <850000>; regulator-max-microvolt = <1350000>; regulator-always-on; + vin-supply = <&vcc_sys>; }; hym8563@51 { @@ -64,6 +66,14 @@ reg = <0x5a>; status = "okay"; + vp1-supply = <&vcc_sys>; + vp2-supply = <&vcc_sys>; + vp3-supply = <&vcc_sys>; + vp4-supply = <&vcc_sys>; + inl1-supply = <&vcc_io>; + inl2-supply = <&vcc_sys>; + inl3-supply = <&vcc_20>; + regulators { vcc_ddr: REG1 { regulator-name = "VCC_DDR"; diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index a1c294bf7fed..f62ea78754a9 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -43,9 +43,16 @@ #clock-cells = <1>; clock-output-names = "xin32k", "rk808-clkout2"; + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; vcc8-supply = <&vcc_18>; vcc9-supply = <&vcc_io>; vcc10-supply = <&vcc_io>; + vcc11-supply = <&vcc_sys>; vcc12-supply = <&vcc_io>; vddio-supply = <&vccio_pmu>; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 5e895a514a0b..4a457518d861 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -103,6 +103,15 @@ regulator-always-on; regulator-boot-on; }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; }; &emmc { @@ -238,6 +247,10 @@ }; }; +&usbphy { + status = "okay"; +}; + &usb_host0_ehci { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index e6f873abbe0d..b54dd78580c1 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -179,6 +179,22 @@ status = "okay"; }; +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + &hdmi { ddc-i2c-bus = <&i2c5>; status = "okay"; @@ -459,6 +475,10 @@ status = "okay"; }; +&usbphy { + status = "okay"; +}; + &usb_host1 { pinctrl-names = "default"; pinctrl-0 = <&usbhub_rst>; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts new file mode 100644 index 000000000000..d081f0e0da36 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -0,0 +1,447 @@ +/* + * Copyright (c) 2014, 2015 Andy Yan <andy.yan@rock-chips.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "rk3288.dtsi" + +/ { + model = "PopMetal-RK3288"; + compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; + + memory{ + reg = <0 0x80000000>; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + #clock-cells = <0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + button@0 { + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + linux,code = <116>; + label = "GPIO Key Power"; + linux,input-type = <1>; + gpio-key,wakeup = <1>; + debounce-interval = <100>; + }; + }; + + ir: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&emmc { + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; /* wp not hooked up */ + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "okay"; +}; + +&gmac { + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio4 7 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &global_pwroff>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_18>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vcc_io>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_arm"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_lan: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_lan"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc18_lcd: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + ldo5: LDO_REG5 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ldo5"; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca_codec: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_codec"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_wl: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_wl"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + ak8963: ak8963@0d { + compatible = "asahi-kasei,ak8975"; + reg = <0x0d>; + interrupt-parent = <&gpio8>; + interrupts = <1 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&comp_int>; + }; + + l3g4200d: l3g4200d@68 { + compatible = "st,l3g4200d-gyro"; + st,drdy-int-pin = <2>; + reg = <0x6b>; + }; + + mma8452: mma8452@1d { + compatible = "fsl,mma8452"; + reg = <0x1d>; + interrupt-parent = <&gpio8>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&gsensor_int>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&pinctrl { + ak8963 { + comp_int: comp-int { + rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + ir { + ir_int: ir-int { + rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + mma8452 { + gsensor_int: gsensor-int { + rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index d771f687a13b..165968d51d8f 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -411,6 +411,7 @@ "mac_clk_rx", "mac_clk_tx", "clk_mac_ref", "clk_mac_refout", "aclk_mac", "pclk_mac"; + status = "disabled"; }; usb_host0_ehci: usb@ff500000 { @@ -419,6 +420,8 @@ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_USBHOST0>; clock-names = "usbhost"; + phys = <&usbphy1>; + phy-names = "usb"; status = "disabled"; }; @@ -431,6 +434,8 @@ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_USBHOST1>; clock-names = "otg"; + phys = <&usbphy2>; + phy-names = "usb2-phy"; status = "disabled"; }; @@ -441,6 +446,8 @@ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_OTG0>; clock-names = "otg"; + phys = <&usbphy0>; + phy-names = "usb2-phy"; status = "disabled"; }; @@ -697,6 +704,35 @@ interrupts = <GIC_PPI 9 0xf04>; }; + usbphy: phy { + compatible = "rockchip,rk3288-usb-phy"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + usbphy0: usb-phy0 { + #phy-cells = <0>; + reg = <0x320>; + clocks = <&cru SCLK_OTGPHY0>; + clock-names = "phyclk"; + }; + + usbphy1: usb-phy1 { + #phy-cells = <0>; + reg = <0x334>; + clocks = <&cru SCLK_OTGPHY1>; + clock-names = "phyclk"; + }; + + usbphy2: usb-phy2 { + #phy-cells = <0>; + reg = <0x348>; + clocks = <&cru SCLK_OTGPHY2>; + clock-names = "phyclk"; + }; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3288-pinctrl"; rockchip,grf = <&grf>; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 261311bdf65b..57ab8587f7b9 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -26,6 +26,7 @@ serial2 = &usart1; serial3 = &usart2; serial4 = &usart3; + serial5 = &uart0; gpio0 = &pioA; gpio1 = &pioB; gpio2 = &pioC; @@ -206,6 +207,17 @@ status = "disabled"; }; + uart0: serial@f0024000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf0024000 0x100>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&uart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + pwm0: pwm@f002c000 { compatible = "atmel,sama5d3-pwm"; reg = <0xf002c000 0x300>; @@ -439,7 +451,7 @@ }; dbgu: serial@ffffee00 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>, @@ -764,6 +776,22 @@ }; }; + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* conflicts with PWMFI2, ISI_D8 */ + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* conflicts with ISI_PCK */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* conflicts with TWD0, ISI_VSYNC */ + AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* conflicts with TWCK0, ISI_HSYNC */ + }; + }; + usart0 { pinctrl_usart0: usart0-0 { atmel,pins = @@ -1098,6 +1126,12 @@ atmel,clk-output-range = <0 66000000>; }; + uart0_clk: uart0_clk { + #clock-cells = <0>; + reg = <16>; + atmel,clk-output-range = <0 66000000>; + }; + twi0_clk: twi0_clk { reg = <18>; #clock-cells = <0>; @@ -1248,7 +1282,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; @@ -1416,7 +1449,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts index 9089c7c6cea8..d9a9aca1ccfd 100644 --- a/arch/arm/boot/dts/sama5d35ek.dts +++ b/arch/arm/boot/dts/sama5d35ek.dts @@ -44,8 +44,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pb_user1 { label = "pb_user1"; diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi index eaf41451ad0c..c5a3772741bf 100644 --- a/arch/arm/boot/dts/sama5d3_can.dtsi +++ b/arch/arm/boot/dts/sama5d3_can.dtsi @@ -1,5 +1,5 @@ /* - * at91sama5d3_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * sama5d3_can.dtsi - Device Tree Include file for SAMA5D3 SoC with * CAN support * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi index fe2af9276312..7cb235ef0fb6 100644 --- a/arch/arm/boot/dts/sama5d3_emac.dtsi +++ b/arch/arm/boot/dts/sama5d3_emac.dtsi @@ -1,5 +1,5 @@ /* - * at91sama5d3_emac.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * sama5d3_emac.dtsi - Device Tree Include file for SAMA5D3 SoC with * Ethernet. * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> @@ -41,7 +41,7 @@ }; macb1: ethernet@f802c000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; + compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi index de5ed59fb446..23f225fbb756 100644 --- a/arch/arm/boot/dts/sama5d3_gmac.dtsi +++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi @@ -1,5 +1,5 @@ /* - * at91sama5d3_gmac.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * sama5d3_gmac.dtsi - Device Tree Include file for SAMA5D3 SoC with * Gigabit Ethernet. * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi index 85d302701565..be7cfefc6c31 100644 --- a/arch/arm/boot/dts/sama5d3_lcd.dtsi +++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi @@ -1,5 +1,5 @@ /* - * at91sama5d3_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * sama5d3_lcd.dtsi - Device Tree Include file for SAMA5D3 SoC with * LCD support * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> @@ -13,40 +13,183 @@ / { ahb { apb { + hlcdc: hlcdc@f0030000 { + compatible = "atmel,sama5d3-hlcdc"; + reg = <0xf0030000 0x2000>; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + status = "disabled"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; + pinctrl@fffff200 { lcd { - pinctrl_lcd: lcd-0 { + pinctrl_lcd_base: lcd-base-0 { + atmel,pins = + <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */ + AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDISP */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */ + AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */ + }; + + pinctrl_lcd_pwm: lcd-pwm-0 { + atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */ + }; + + pinctrl_lcd_rgb444: lcd-rgb-0 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD11 pin */ + }; + + pinctrl_lcd_rgb565: lcd-rgb-1 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD15 pin */ + }; + + pinctrl_lcd_rgb666: lcd-rgb-2 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD17 pin */ + }; + + pinctrl_lcd_rgb666_alt: lcd-rgb-2-alt { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD16 pin */ + AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* LCDD17 pin */ + }; + + pinctrl_lcd_rgb888: lcd-rgb-3 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */ + AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */ + AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */ + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */ + }; + + pinctrl_lcd_rgb888_alt: lcd-rgb-3-alt { atmel,pins = - <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA24 periph A LCDPWM */ - AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA26 periph A LCDVSYNC */ - AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA27 periph A LCDHSYNC */ - AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA25 periph A LCDDISP */ - AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA29 periph A LCDDEN */ - AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA28 periph A LCDPCK */ - AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A LCDD0 pin */ - AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A LCDD1 pin */ - AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA2 periph A LCDD2 pin */ - AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA3 periph A LCDD3 pin */ - AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA4 periph A LCDD4 pin */ - AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA5 periph A LCDD5 pin */ - AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA6 periph A LCDD6 pin */ - AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A LCDD7 pin */ - AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A LCDD8 pin */ - AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A LCDD9 pin */ - AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A LCDD10 pin */ - AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A LCDD11 pin */ - AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A LCDD12 pin */ - AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A LCDD13 pin */ - AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A LCDD14 pin */ - AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A LCDD15 pin */ - AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC14 periph C LCDD16 pin */ - AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC13 periph C LCDD17 pin */ - AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC12 periph C LCDD18 pin */ - AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC11 periph C LCDD19 pin */ - AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC10 periph C LCDD20 pin */ - AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC15 periph C LCDD21 pin */ - AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* PE27 periph C LCDD22 pin */ - AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PE28 periph C LCDD23 pin */ + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD16 pin */ + AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD17 pin */ + AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD18 pin */ + AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD19 pin */ + AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD20 pin */ + AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD21 pin */ + AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD22 pin */ + AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* LCDD23 pin */ }; }; }; diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi index 1b02208ea6ff..026b252f09b3 100644 --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi @@ -1,5 +1,5 @@ /* - * at91sama5d3_mci2.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * sama5d3_mci2.dtsi - Device Tree Include file for SAMA5D3 SoC with * 3 MMC ports * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi index 02848453ca0c..f7fa58fe09f1 100644 --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi @@ -1,5 +1,5 @@ /* - * at91sama5d3_tcb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * sama5d3_tcb1.dtsi - Device Tree Include file for SAMA5D3 SoC with * 2 TC blocks. * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index 7a8d4c6115f7..2511d748867b 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -1,5 +1,5 @@ /* - * at91sama5d3_uart.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * sama5d3_uart.dtsi - Device Tree Include file for SAMA5D3 SoC with * UART support * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index d986b41b9654..6b1bb58f9c0b 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -64,8 +64,13 @@ gpio2 = &pioC; gpio3 = &pioD; gpio4 = &pioE; + pwm0 = &pwm0; + ssc0 = &ssc0; + ssc1 = &ssc1; tcb0 = &tcb0; tcb1 = &tcb1; + i2c0 = &i2c0; + i2c1 = &i2c1; i2c2 = &i2c2; }; cpus { @@ -259,7 +264,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00600000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; @@ -309,6 +314,34 @@ #size-cells = <1>; ranges; + hlcdc: hlcdc@f0000000 { + compatible = "atmel,sama5d4-hlcdc"; + reg = <0xf0000000 0x4000>; + interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + status = "disabled"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; + dma1: dma-controller@f0004000 { compatible = "atmel,sama5d4-dma"; reg = <0xf0004000 0x200>; @@ -318,6 +351,21 @@ clock-names = "dma_clk"; }; + isi: isi@f0008000 { + compatible = "atmel,at91sam9g45-isi"; + reg = <0xf0008000 0x4000>; + interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isi_data_0_7>; + clocks = <&isi_clk>; + clock-names = "isi_clk"; + status = "disabled"; + port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + ramc0: ramc@f0010000 { compatible = "atmel,sama5d3-ddramc"; reg = <0xf0010000 0x200>; @@ -461,8 +509,8 @@ lcdck: lcdck { #clock-cells = <0>; - reg = <4>; - clocks = <&smd>; + reg = <3>; + clocks = <&mck>; }; smdck: smdck { @@ -770,7 +818,7 @@ reg = <50>; }; - lcd_clk: lcd_clk { + lcdc_clk: lcdc_clk { #clock-cells = <0>; reg = <51>; }; @@ -799,6 +847,33 @@ clock-names = "mci_clk"; }; + ssc0: ssc@f8008000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf8008000 0x4000>; + interrupts = <48 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(26))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(27))>; + dma-names = "tx", "rx"; + clocks = <&ssc0_clk>; + clock-names = "pclk"; + status = "disabled"; + }; + + pwm0: pwm@f800c000 { + compatible = "atmel,sama5d3-pwm"; + reg = <0xf800c000 0x300>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + clocks = <&pwm_clk>; + status = "disabled"; + }; + spi0: spi@f8010000 { #address-cells = <1>; #size-cells = <0>; @@ -838,6 +913,25 @@ status = "disabled"; }; + i2c1: i2c@f8018000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8018000 0x4000>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(4)>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(5)>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi1_clk>; + status = "disabled"; + }; + tcb0: timer@f801c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf801c000 0x100>; @@ -852,6 +946,8 @@ interrupts = <54 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_rmii>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&macb0_clk>, <&macb0_clk>; clock-names = "hclk", "pclk"; status = "disabled"; @@ -952,6 +1048,24 @@ status = "disabled"; }; + ssc1: ssc@fc014000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xfc014000 0x4000>; + interrupts = <49 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(28))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(29))>; + dma-names = "tx", "rx"; + clocks = <&ssc1_clk>; + clock-names = "pclk"; + status = "disabled"; + }; + tcb1: timer@fc020000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xfc020000 0x100>; @@ -1007,6 +1121,46 @@ }; }; + aes@fc044000 { + compatible = "atmel,at91sam9g46-aes"; + reg = <0xfc044000 0x100>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(41)>, + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(40)>; + dma-names = "tx", "rx"; + clocks = <&aes_clk>; + clock-names = "aes_clk"; + status = "disabled"; + }; + + tdes@fc04c000 { + compatible = "atmel,at91sam9g46-tdes"; + reg = <0xfc04c000 0x100>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(42)>, + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(43)>; + dma-names = "tx", "rx"; + clocks = <&tdes_clk>; + clock-names = "tdes_clk"; + status = "disabled"; + }; + + sha@fc050000 { + compatible = "atmel,at91sam9g46-sha"; + reg = <0xfc050000 0x100>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(44)>; + dma-names = "tx"; + clocks = <&sha_clk>; + clock-names = "sha_clk"; + status = "disabled"; + }; + rstc@fc068600 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfc068600 0x10>; @@ -1063,7 +1217,7 @@ }; dbgu: serial@fc069000 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfc069000 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; @@ -1189,6 +1343,14 @@ }; }; + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + <AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* TWD1, conflicts with UART0 RX and DIBP */ + AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* TWCK1, conflicts with UART0 TX and DIBN */ + }; + }; + i2c2 { pinctrl_i2c2: i2c2-0 { atmel,pins = @@ -1197,6 +1359,155 @@ }; }; + isi { + pinctrl_isi_data_0_7: isi-0-data-0-7 { + atmel,pins = + <AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D0 */ + AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D1 */ + AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D2 */ + AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D3 */ + AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D4 */ + AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D5 */ + AT91_PIOC 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D6 */ + AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D7 */ + AT91_PIOB 1 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_PCK, conflict with G0_RXCK */ + AT91_PIOB 3 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_VSYNC */ + AT91_PIOB 4 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_HSYNC */ + }; + pinctrl_isi_data_8_9: isi-0-data-8-9 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_D8, conflicts with SPI0_MISO, PWMH2 */ + AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_D9, conflicts with SPI0_MOSI, PWML2 */ + }; + pinctrl_isi_data_10_11: isi-0-data-10-11 { + atmel,pins = + <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_D10, conflicts with SPI0_SPCK, PWMH3 */ + AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_D11, conflicts with SPI0_NPCS0, PWML3 */ + }; + }; + + lcd { + pinctrl_lcd_base: lcd-base-0 { + atmel,pins = + <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */ + AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */ + AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */ + }; + pinctrl_lcd_pwm: lcd-pwm-0 { + atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */ + }; + pinctrl_lcd_rgb444: lcd-rgb-0 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD11 pin */ + }; + pinctrl_lcd_rgb565: lcd-rgb-1 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD15 pin */ + }; + pinctrl_lcd_rgb666: lcd-rgb-2 { + atmel,pins = + <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */ + AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */ + AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */ + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */ + }; + pinctrl_lcd_rgb777: lcd-rgb-3 { + atmel,pins = + /* LCDDAT0 conflicts with TMS */ + <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + /* LCDDAT8 conflicts with TCK */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + /* LCDDAT16 conflicts with NTRST */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */ + AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */ + AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */ + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */ + }; + pinctrl_lcd_rgb888: lcd-rgb-4 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */ + AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */ + AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */ + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */ + }; + }; + macb0 { pinctrl_macb0_rmii: macb0_rmii-0 { atmel,pins = @@ -1280,6 +1591,38 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx { + atmel,pins = + <AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* TK0 */ + AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE /* TF0 */ + AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TD0 */ + }; + + pinctrl_ssc0_rx: ssc0_rx { + atmel,pins = + <AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* RK0 */ + AT91_PIOB 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* RF0 */ + AT91_PIOB 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* RD0 */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx { + atmel,pins = + <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* TK1 */ + AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* TF1 */ + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TD1 */ + }; + + pinctrl_ssc1_rx: ssc1_rx { + atmel,pins = + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* RK1 */ + AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* RF1 */ + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* RD1 */ + }; + }; + usart2 { pinctrl_usart2: usart2-0 { atmel,pins = diff --git a/arch/arm/boot/dts/sh7372-mackerel.dts b/arch/arm/boot/dts/sh7372-mackerel.dts deleted file mode 100644 index a759a276c9a9..000000000000 --- a/arch/arm/boot/dts/sh7372-mackerel.dts +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Device Tree Source for the mackerel board - * - * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "sh7372.dtsi" - -/ { - model = "Mackerel (AP4 EVM 2nd)"; - compatible = "renesas,mackerel"; - - chosen { - bootargs = "console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs nfsroot=,tcp,v3 ip=dhcp mem=240m rw"; - }; - - memory { - device_type = "memory"; - reg = <0x40000000 0x10000000>; - }; -}; diff --git a/arch/arm/boot/dts/sh7372.dtsi b/arch/arm/boot/dts/sh7372.dtsi deleted file mode 100644 index f863a10cb1b2..000000000000 --- a/arch/arm/boot/dts/sh7372.dtsi +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Device Tree Source for the sh7372 SoC - * - * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/include/ "skeleton.dtsi" - -/ { - compatible = "renesas,sh7372"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a8"; - device_type = "cpu"; - reg = <0x0>; - clock-frequency = <800000000>; - }; - }; - - pfc: pfc@e6050000 { - compatible = "renesas,pfc-sh7372"; - reg = <0xe6050000 0x8000>, - <0xe605801c 0x1c>; - gpio-controller; - #gpio-cells = <2>; - }; -}; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts deleted file mode 100644 index 6d32c87632d4..000000000000 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ /dev/null @@ -1,366 +0,0 @@ -/* - * Device Tree Source for the KZM-A9-GT board - * - * Copyright (C) 2012 Horms Solutions Ltd. - * - * Based on sh73a0-kzm9g.dts - * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "sh73a0.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "KZM-A9-GT"; - compatible = "renesas,kzm9g-reference", "renesas,sh73a0"; - - aliases { - serial4 = &scifa4; - }; - - cpus { - cpu@0 { - cpu0-supply = <&vdd_dvfs>; - operating-points = < - /* kHz uV */ - 1196000 1315000 - 598000 1175000 - 398667 1065000 - >; - voltage-tolerance = <1>; /* 1% */ - }; - }; - - chosen { - bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw"; - stdout-path = &scifa4; - }; - - memory { - device_type = "memory"; - reg = <0x41000000 0x1e800000>; - }; - - reg_1p8v: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - vmmc_sdhi0: regulator@2 { - compatible = "regulator-fixed"; - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pfc 15 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vmmc_sdhi2: regulator@3 { - compatible = "regulator-fixed"; - regulator-name = "SDHI2 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pfc 14 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - lan9220@10000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x10000000 0x100>; - phy-mode = "mii"; - interrupt-parent = <&irqpin0>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - reg-io-width = <4>; - smsc,irq-push-pull; - smsc,save-mac-address; - vddvario-supply = <®_1p8v>; - vdd33a-supply = <®_3p3v>; - }; - - leds { - compatible = "gpio-leds"; - led1 { - gpios = <&pfc 20 GPIO_ACTIVE_LOW>; - label = "LED1"; - }; - led2 { - gpios = <&pfc 21 GPIO_ACTIVE_LOW>; - label = "LED2"; - }; - led3 { - gpios = <&pfc 22 GPIO_ACTIVE_LOW>; - label = "LED3"; - }; - led4 { - gpios = <&pfc 23 GPIO_ACTIVE_LOW>; - label = "LED4"; - }; - }; - - keyboard { - compatible = "gpio-keys"; - - back-key { - gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>; - linux,code = <KEY_BACK>; - label = "SW3"; - }; - - right-key { - gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RIGHT>; - label = "SW2-R"; - }; - - left-key { - gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>; - linux,code = <KEY_LEFT>; - label = "SW2-L"; - }; - - enter-key { - gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>; - linux,code = <KEY_ENTER>; - label = "SW2-P"; - }; - - up-key { - gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>; - linux,code = <KEY_UP>; - label = "SW2-U"; - }; - - down-key { - gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>; - linux,code = <KEY_DOWN>; - label = "SW2-D"; - }; - - home-key { - gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>; - linux,code = <KEY_HOME>; - label = "SW1"; - }; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "left_j"; - simple-audio-card,cpu { - sound-dai = <&sh_fsi2 0>; - }; - simple-audio-card,codec { - sound-dai = <&ak4648>; - bitclock-master; - frame-master; - system-clock-frequency = <11289600>; - }; - }; -}; - -&cmt1 { - status = "okay"; -}; - -&extal2_clk { - clock-frequency = <48000000>; -}; - -&i2c0 { - status = "okay"; - as3711@40 { - compatible = "ams,as3711"; - reg = <0x40>; - - regulators { - vdd_dvfs: sd1 { - regulator-name = "1.315V CPU"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - sd2 { - regulator-name = "1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - sd4 { - regulator-name = "1.215V"; - regulator-min-microvolt = <1215000>; - regulator-max-microvolt = <1235000>; - regulator-always-on; - regulator-boot-on; - }; - ldo2 { - regulator-name = "2.8V CPU"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - ldo3 { - regulator-name = "3.0V CPU"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - }; - ldo4 { - regulator-name = "2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - ldo5 { - regulator-name = "2.8V #2"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - ldo7 { - regulator-name = "1.15V CPU"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - regulator-always-on; - regulator-boot-on; - }; - ldo8 { - regulator-name = "1.15V CPU #2"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; - - ak4648: ak4648@12 { - #sound-dai-cells = <0>; - compatible = "asahi-kasei,ak4648"; - reg = <0x12>; - }; -}; - -&i2c3 { - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; - status = "okay"; - - pcf8575: gpio@20 { - compatible = "nxp,pcf8575"; - reg = <0x20>; - interrupt-parent = <&irqpin2>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; -}; - -&mmcif { - pinctrl-0 = <&mmcif_pins>; - pinctrl-names = "default"; - - bus-width = <8>; - vmmc-supply = <®_1p8v>; - status = "okay"; -}; - -&pfc { - i2c3_pins: i2c3 { - renesas,groups = "i2c3_1"; - renesas,function = "i2c3"; - }; - - mmcif_pins: mmc { - mux { - renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0"; - renesas,function = "mmc0"; - }; - cfg { - renesas,groups = "mmc0_data8_0"; - renesas,pins = "PORT279"; - bias-pull-up; - }; - }; - - scifa4_pins: serial4 { - renesas,groups = "scifa4_data", "scifa4_ctrl"; - renesas,function = "scifa4"; - }; - - sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; - renesas,function = "sdhi0"; - }; - - sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; - }; - - fsia_pins: sounda { - renesas,groups = "fsia_mclk_in", "fsia_sclk_in", - "fsia_data_in", "fsia_data_out"; - renesas,function = "fsia"; - }; -}; - -&scifa4 { - pinctrl-0 = <&scifa4_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&vmmc_sdhi0>; - bus-width = <4>; - status = "okay"; -}; - -&sdhi2 { - pinctrl-0 = <&sdhi2_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&vmmc_sdhi2>; - bus-width = <4>; - broken-cd; - status = "okay"; -}; - -&sh_fsi2 { - pinctrl-0 = <&fsia_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 27c5f426d172..022ba505f573 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -1,6 +1,9 @@ /* * Device Tree Source for the KZM-A9-GT board * + * Copyright (C) 2012 Horms Solutions Ltd. + * + * Based on sh73a0-kzm9g.dts * Copyright (C) 2012 Renesas Solutions Corp. * * This file is licensed under the terms of the GNU General Public License @@ -10,17 +13,388 @@ /dts-v1/; #include "sh73a0.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "KZM-A9-GT"; compatible = "renesas,kzm9g", "renesas,sh73a0"; + aliases { + serial4 = &scifa4; + }; + + cpus { + cpu@0 { + cpu0-supply = <&vdd_dvfs>; + operating-points = < + /* kHz uV */ + 1196000 1315000 + 598000 1175000 + 398667 1065000 + >; + voltage-tolerance = <1>; /* 1% */ + }; + }; + chosen { - bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw"; + bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw"; + stdout-path = &scifa4; }; memory { device_type = "memory"; - reg = <0x41000000 0x1e800000>; + reg = <0x40000000 0x20000000>; + }; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vmmc_sdhi0: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pfc 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vmmc_sdhi2: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pfc 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + leds { + compatible = "gpio-leds"; + led1 { + gpios = <&pfc 20 GPIO_ACTIVE_LOW>; + label = "LED1"; + }; + led2 { + gpios = <&pfc 21 GPIO_ACTIVE_LOW>; + label = "LED2"; + }; + led3 { + gpios = <&pfc 22 GPIO_ACTIVE_LOW>; + label = "LED3"; + }; + led4 { + gpios = <&pfc 23 GPIO_ACTIVE_LOW>; + label = "LED4"; + }; + }; + + keyboard { + compatible = "gpio-keys"; + + back-key { + gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + label = "SW3"; + }; + + right-key { + gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RIGHT>; + label = "SW2-R"; + }; + + left-key { + gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_LEFT>; + label = "SW2-L"; + }; + + enter-key { + gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_ENTER>; + label = "SW2-P"; + }; + + up-key { + gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_UP>; + label = "SW2-U"; + }; + + down-key { + gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_DOWN>; + label = "SW2-D"; + }; + + home-key { + gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + label = "SW1"; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "left_j"; + simple-audio-card,cpu { + sound-dai = <&sh_fsi2 0>; + }; + simple-audio-card,codec { + sound-dai = <&ak4648>; + bitclock-master; + frame-master; + system-clock-frequency = <11289600>; + }; + }; +}; + +&bsc { + ethernet@10000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x10000000 0x100>; + phy-mode = "mii"; + interrupt-parent = <&irqpin0>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reg-io-width = <4>; + smsc,irq-push-pull; + smsc,save-mac-address; + vddvario-supply = <®_1p8v>; + vdd33a-supply = <®_3p3v>; + }; +}; + +&cmt1 { + status = "okay"; +}; + +&extal2_clk { + clock-frequency = <48000000>; +}; + +&i2c0 { + status = "okay"; + + compass@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + interrupt-parent = <&irqpin3>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + }; + + ak4648: codec@12 { + compatible = "asahi-kasei,ak4648"; + reg = <0x12>; + #sound-dai-cells = <0>; + }; + + accelerometer@1d { + compatible = "adi,adxl34x"; + reg = <0x1d>; + interrupt-parent = <&irqpin3>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, + <3 IRQ_TYPE_LEVEL_HIGH>; }; + + rtc@32 { + compatible = "ricoh,r2025sd"; + reg = <0x32>; + }; + + as3711@40 { + compatible = "ams,as3711"; + reg = <0x40>; + + regulators { + vdd_dvfs: sd1 { + regulator-name = "1.315V CPU"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + sd2 { + regulator-name = "1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + sd4 { + regulator-name = "1.215V"; + regulator-min-microvolt = <1215000>; + regulator-max-microvolt = <1235000>; + regulator-always-on; + regulator-boot-on; + }; + ldo2 { + regulator-name = "2.8V CPU"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + ldo3 { + regulator-name = "3.0V CPU"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + ldo4 { + regulator-name = "2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + ldo5 { + regulator-name = "2.8V #2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + ldo7 { + regulator-name = "1.15V CPU"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + }; + ldo8 { + regulator-name = "1.15V CPU #2"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + touchscreen@55 { + compatible = "sitronix,st1232"; + reg = <0x55>; + interrupt-parent = <&irqpin1>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + status = "okay"; + + pcf8575: gpio@20 { + compatible = "nxp,pcf8575"; + reg = <0x20>; + interrupt-parent = <&irqpin2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&mmcif { + pinctrl-0 = <&mmcif_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + vmmc-supply = <®_1p8v>; + status = "okay"; +}; + +&pfc { + i2c3_pins: i2c3 { + renesas,groups = "i2c3_1"; + renesas,function = "i2c3"; + }; + + mmcif_pins: mmc { + mux { + renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0"; + renesas,function = "mmc0"; + }; + cfg { + renesas,groups = "mmc0_data8_0"; + renesas,pins = "PORT279"; + bias-pull-up; + }; + }; + + scifa4_pins: serial4 { + renesas,groups = "scifa4_data", "scifa4_ctrl"; + renesas,function = "scifa4"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; + renesas,function = "sdhi0"; + }; + + sdhi2_pins: sd2 { + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; + renesas,function = "sdhi2"; + }; + + fsia_pins: sounda { + renesas,groups = "fsia_mclk_in", "fsia_sclk_in", + "fsia_data_in", "fsia_data_out"; + renesas,function = "fsia"; + }; +}; + +&scifa4 { + pinctrl-0 = <&scifa4_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vmmc_sdhi0>; + bus-width = <4>; + status = "okay"; +}; + +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vmmc_sdhi2>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; + +&sh_fsi2 { + pinctrl-0 = <&fsia_pins>; + pinctrl-names = "default"; + + status = "okay"; }; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 2dfd5b44255d..45b539ce4d35 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -11,6 +11,7 @@ /include/ "skeleton.dtsi" #include <dt-bindings/clock/sh73a0-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -26,15 +27,24 @@ compatible = "arm,cortex-a9"; reg = <0>; clock-frequency = <1196000000>; + power-domains = <&pd_a2sl>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; clock-frequency = <1196000000>; + power-domains = <&pd_a2sl>; }; }; + timer@f0000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xf0000600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&twd_clk>; + }; + gic: interrupt-controller@f0001000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -49,6 +59,7 @@ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>, <0 38 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "sec", "temp"; + power-domains = <&pd_a4bc1>; }; sbsc1: memory-controller@fe400000 { @@ -57,6 +68,7 @@ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>, <0 36 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "sec", "temp"; + power-domains = <&pd_a4bc0>; }; pmu { @@ -69,11 +81,12 @@ compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48"; reg = <0xe6138000 0x200>; interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks SH73A0_CLK_CMT1>; + clock-names = "fck"; + power-domains = <&pd_c5>; renesas,channels-mask = <0x3f>; - clocks = <&mstp3_clks SH73A0_CLK_CMT1>; - clock-names = "fck"; status = "disabled"; }; @@ -94,6 +107,9 @@ 0 6 IRQ_TYPE_LEVEL_HIGH 0 7 IRQ_TYPE_LEVEL_HIGH 0 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; + power-domains = <&pd_a4s>; + control-parent; }; irqpin1: irqpin@e6900004 { @@ -113,6 +129,8 @@ 0 14 IRQ_TYPE_LEVEL_HIGH 0 15 IRQ_TYPE_LEVEL_HIGH 0 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; + power-domains = <&pd_a4s>; control-parent; }; @@ -133,6 +151,9 @@ 0 22 IRQ_TYPE_LEVEL_HIGH 0 23 IRQ_TYPE_LEVEL_HIGH 0 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; + power-domains = <&pd_a4s>; + control-parent; }; irqpin3: irqpin@e690000c { @@ -152,6 +173,9 @@ 0 30 IRQ_TYPE_LEVEL_HIGH 0 31 IRQ_TYPE_LEVEL_HIGH 0 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; + power-domains = <&pd_a4s>; + control-parent; }; i2c0: i2c@e6820000 { @@ -164,6 +188,7 @@ 0 169 IRQ_TYPE_LEVEL_HIGH 0 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks SH73A0_CLK_IIC0>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -177,6 +202,7 @@ 0 53 IRQ_TYPE_LEVEL_HIGH 0 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_IIC1>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -190,6 +216,7 @@ 0 173 IRQ_TYPE_LEVEL_HIGH 0 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks SH73A0_CLK_IIC2>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -203,6 +230,7 @@ 0 185 IRQ_TYPE_LEVEL_HIGH 0 186 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks SH73A0_CLK_IIC3>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -216,6 +244,7 @@ 0 189 IRQ_TYPE_LEVEL_HIGH 0 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks SH73A0_CLK_IIC4>; + power-domains = <&pd_c5>; status = "disabled"; }; @@ -225,6 +254,7 @@ interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH 0 141 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>; + power-domains = <&pd_a3sp>; reg-io-width = <4>; status = "disabled"; }; @@ -236,6 +266,7 @@ 0 84 IRQ_TYPE_LEVEL_HIGH 0 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SDHI0>; + power-domains = <&pd_a3sp>; cap-sd-highspeed; status = "disabled"; }; @@ -247,6 +278,7 @@ interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH 0 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SDHI1>; + power-domains = <&pd_a3sp>; toshiba,mmc-wrprotect-disable; cap-sd-highspeed; status = "disabled"; @@ -258,6 +290,7 @@ interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH 0 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SDHI2>; + power-domains = <&pd_a3sp>; toshiba,mmc-wrprotect-disable; cap-sd-highspeed; status = "disabled"; @@ -269,6 +302,7 @@ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA0>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -278,6 +312,7 @@ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA1>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -287,6 +322,7 @@ interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA2>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -296,6 +332,7 @@ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA3>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -305,6 +342,7 @@ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -314,6 +352,7 @@ interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA5>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -323,6 +362,7 @@ interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SCIFA6>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -332,6 +372,7 @@ interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA7>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -341,6 +382,7 @@ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFB>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -359,6 +401,117 @@ <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>, <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>, <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>; + power-domains = <&pd_c5>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,sysc-sh73a0", "renesas,sysc-rmobile"; + reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>; + + pm-domains { + pd_c5: c5 { + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_c4: c4@0 { + reg = <0>; + #power-domain-cells = <0>; + }; + + pd_d4: d4@1 { + reg = <1>; + #power-domain-cells = <0>; + }; + + pd_a4bc0: a4bc0@4 { + reg = <4>; + #power-domain-cells = <0>; + }; + + pd_a4bc1: a4bc1@5 { + reg = <5>; + #power-domain-cells = <0>; + }; + + pd_a4lc0: a4lc0@6 { + reg = <6>; + #power-domain-cells = <0>; + }; + + pd_a4lc1: a4lc1@7 { + reg = <7>; + #power-domain-cells = <0>; + }; + + pd_a4mp: a4mp@8 { + reg = <8>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3mp: a3mp@9 { + reg = <9>; + #power-domain-cells = <0>; + }; + + pd_a3vc: a3vc@10 { + reg = <10>; + #power-domain-cells = <0>; + }; + }; + + pd_a4rm: a4rm@12 { + reg = <12>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3r: a3r@13 { + reg = <13>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a2rv: a2rv@14 { + reg = <14>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + }; + }; + }; + + pd_a4s: a4s@16 { + reg = <16>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3sp: a3sp@17 { + reg = <17>; + #power-domain-cells = <0>; + }; + + pd_a3sg: a3sg@18 { + reg = <18>; + #power-domain-cells = <0>; + }; + + pd_a3sm: a3sm@19 { + reg = <19>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a2sl: a2sl@20 { + reg = <20>; + #power-domain-cells = <0>; + }; + }; + }; + }; + }; }; sh_fsi2: sound@ec230000 { @@ -366,9 +519,22 @@ compatible = "renesas,fsi2-sh73a0", "renesas,sh_fsi2"; reg = <0xec230000 0x400>; interrupts = <0 146 0x4>; + power-domains = <&pd_a4mp>; status = "disabled"; }; + bsc: bus@fec10000 { + compatible = "renesas,bsc-sh73a0", "renesas,bsc", + "simple-pm-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x20000000>; + reg = <0xfec10000 0x400>; + interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&zb_clk>; + power-domains = <&pd_a4s>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -426,133 +592,159 @@ vclk1_clk: vclk1_clk@e6150008 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150008 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&extcki_clk>, <&extal2_clk>, <&main_div2_clk>, + <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>, + <0>; #clock-cells = <0>; clock-output-names = "vclk1"; }; vclk2_clk: vclk2_clk@e615000c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615000c 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&extcki_clk>, <&extal2_clk>, <&main_div2_clk>, + <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>, + <0>; #clock-cells = <0>; clock-output-names = "vclk2"; }; vclk3_clk: vclk3_clk@e615001c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615001c 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&extcki_clk>, <&extal2_clk>, <&main_div2_clk>, + <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>, + <0>; #clock-cells = <0>; clock-output-names = "vclk3"; }; zb_clk: zb_clk@e6150010 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150010 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <0>, + <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; clock-output-names = "zb"; }; flctl_clk: flctl_clk@e6150014 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150014 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <0>, + <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; clock-output-names = "flctlck"; }; sdhi0_clk: sdhi0_clk@e6150074 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150074 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&pll1_div13_clk>, <0>; #clock-cells = <0>; clock-output-names = "sdhi0ck"; }; sdhi1_clk: sdhi1_clk@e6150078 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150078 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&pll1_div13_clk>, <0>; #clock-cells = <0>; clock-output-names = "sdhi1ck"; }; sdhi2_clk: sdhi2_clk@e615007c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615007c 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&pll1_div13_clk>, <0>; #clock-cells = <0>; clock-output-names = "sdhi2ck"; }; fsia_clk: fsia_clk@e6150018 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150018 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&fsiack_clk>, <&fsiack_clk>; #clock-cells = <0>; clock-output-names = "fsia"; }; fsib_clk: fsib_clk@e6150090 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150090 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&fsibck_clk>, <&fsibck_clk>; #clock-cells = <0>; clock-output-names = "fsib"; }; sub_clk: sub_clk@e6150080 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150080 4>; - clocks = <&extal2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; clock-output-names = "sub"; }; spua_clk: spua_clk@e6150084 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150084 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; clock-output-names = "spua"; }; spuv_clk: spuv_clk@e6150094 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150094 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; clock-output-names = "spuv"; }; msu_clk: msu_clk@e6150088 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150088 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <0>, + <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; clock-output-names = "msu"; }; hsi_clk: hsi_clk@e615008c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615008c 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&pll1_div7_clk>, <0>; #clock-cells = <0>; clock-output-names = "hsi"; }; mfg1_clk: mfg1_clk@e6150098 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150098 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <0>, + <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; clock-output-names = "mfg1"; }; mfg2_clk: mfg2_clk@e615009c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615009c 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <0>, + <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; clock-output-names = "mfg2"; }; dsit_clk: dsit_clk@e6150060 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150060 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <0>, + <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; clock-output-names = "dsit"; }; dsi0p_clk: dsi0p_clk@e6150064 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150064 4>; - clocks = <&pll1_div2_clk>; + clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, + <&cpg_clocks SH73A0_CLK_MAIN>, <&extal2_clk>, + <&extcki_clk>, <0>, <0>, <0>; #clock-cells = <0>; clock-output-names = "dsi0pck"; }; @@ -695,5 +887,16 @@ clock-output-names = "iic3", "iic4", "keysc"; }; + mstp5_clks: mstp5_clks@e6150144 { + compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xe6150144 4>, <0xe615003c 4>; + clocks = <&cpg_clocks SH73A0_CLK_HP>; + #clock-cells = <1>; + clock-indices = < + SH73A0_CLK_INTCA0 + >; + clock-output-names = + "intca0"; + }; }; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 252c3d1bda50..d9176e606173 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -660,7 +660,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0xfff01000 0x1000>; - interrupts = <0 156 4>; + interrupts = <0 155 4>; num-cs = <4>; clocks = <&spi_m_clk>; status = "disabled"; @@ -713,6 +713,9 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&l4_sp_clk>; + dmas = <&pdma 28>, + <&pdma 29>; + dma-names = "tx", "rx"; }; uart1: serial1@ffc03000 { @@ -722,6 +725,9 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&l4_sp_clk>; + dmas = <&pdma 30>, + <&pdma 31>; + dma-names = "tx", "rx"; }; rst: rstmgr@ffd05000 { diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index ea28ebadab1a..eeb7afecbbe6 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -10,7 +10,7 @@ #include "stih416-clock.dtsi" #include "stih416-pinctrl.dtsi" -#include <dt-bindings/phy/phy-miphy365x.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset-controller/stih416-resets.h> / { @@ -306,7 +306,7 @@ reg = <0xfe380000 0x1000>; interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; interrupt-names = "hostc"; - phys = <&phy_port0 MIPHY_TYPE_SATA>; + phys = <&phy_port0 PHY_TYPE_SATA>; phy-names = "sata-phy"; resets = <&powerdown STIH416_SATA0_POWERDOWN>, <&softreset STIH416_SATA0_SOFTRESET>; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index ab7891c43231..75742f8f96f3 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -56,6 +56,22 @@ model = "Olimex A10-OLinuXino-LIME"; compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10"; + cpus { + cpu0: cpu@0 { + /* + * The A10-Lime is known to be unstable + * when running at 1008 MHz + */ + operating-points = < + /* kHz uV */ + 912000 1350000 + 864000 1300000 + 624000 1250000 + >; + cooling-max-level = <2>; + }; + }; + soc@01c00000 { emac: ethernet@01c0b000 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 5c2925831f20..eebb7853e00b 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -75,7 +75,6 @@ clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ - 1056000 1500000 1008000 1400000 912000 1350000 864000 1300000 @@ -83,7 +82,7 @@ >; #cooling-cells = <2>; cooling-min-level = <0>; - cooling-max-level = <4>; + cooling-max-level = <3>; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index f8818f1edbbe..883cb4873688 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -47,7 +47,6 @@ clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ - 1104000 1500000 1008000 1400000 912000 1350000 864000 1300000 @@ -57,7 +56,7 @@ >; #cooling-cells = <2>; cooling-min-level = <0>; - cooling-max-level = <6>; + cooling-max-level = <5>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 3a8530b79f1c..fdd181792b4b 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -105,7 +105,6 @@ clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ - 1008000 1450000 960000 1400000 912000 1400000 864000 1300000 @@ -116,7 +115,7 @@ >; #cooling-cells = <2>; cooling-min-level = <0>; - cooling-max-level = <7>; + cooling-max-level = <6>; }; cpu@1 { diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 4296b5398bf5..f58a3d9d5f13 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -8,7 +8,7 @@ / { compatible = "nvidia,tegra114"; - interrupt-parent = <&gic>; + interrupt-parent = <&lic>; host1x@50000000 { compatible = "nvidia,tegra114-host1x", "simple-bus"; @@ -134,6 +134,19 @@ <0x50046000 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; + }; + + lic: interrupt-controller@60004000 { + compatible = "nvidia,tegra114-ictlr", "nvidia,tegra30-ictlr"; + reg = <0x60004000 0x100>, + <0x60004100 0x50>, + <0x60004200 0x50>, + <0x60004300 0x50>, + <0x60004400 0x50>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; }; timer@60005000 { @@ -766,5 +779,6 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; }; }; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi new file mode 100644 index 000000000000..2c5cede686dc --- /dev/null +++ b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi @@ -0,0 +1,2421 @@ +/ { + clock@0,60006000 { + emc-timings-3 { + nvidia,ram-code = <3>; + + timing-12750000 { + clock-frequency = <12750000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-20400000 { + clock-frequency = <20400000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-40800000 { + clock-frequency = <40800000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-68000000 { + clock-frequency = <68000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-300000000 { + clock-frequency = <300000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C>; + clock-names = "emc-parent"; + }; + timing-396000000 { + clock-frequency = <396000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M>; + clock-names = "emc-parent"; + }; + timing-528000000 { + clock-frequency = <528000000>; + nvidia,parent-clock-frequency = <528000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + timing-600000000 { + clock-frequency = <600000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>; + clock-names = "emc-parent"; + }; + timing-792000000 { + clock-frequency = <792000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + timing-924000000 { + clock-frequency = <924000000>; + nvidia,parent-clock-frequency = <924000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + }; + }; + + emc@0,7001b000 { + emc-timings-3 { + nvidia,ram-code = <3>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000005 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000060 + 0x00000000 + 0x00000018 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000007 + 0x0000000f + 0x00000005 + 0x00000005 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000064 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000e0e + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000007 + 0x00000000 + 0x00000042 + 0x000e000e + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x800001c5 + 0x0000000a + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 + 0x00000005 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000005 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x0000009a + 0x00000000 + 0x00000026 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000007 + 0x0000000f + 0x00000006 + 0x00000006 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x000000a0 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000e0e + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x0000000b + 0x00000000 + 0x00000042 + 0x000e000e + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x8000023a + 0x0000000a + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000001 + 0x0000000a + 0x00000000 + 0x00000001 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000005 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000134 + 0x00000000 + 0x0000004d + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000008 + 0x0000000f + 0x0000000c + 0x0000000c + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x0000013f + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000e0e + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000015 + 0x00000000 + 0x00000042 + 0x000e000e + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x80000370 + 0x0000000a + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000003 + 0x00000011 + 0x00000000 + 0x00000002 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000005 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000202 + 0x00000000 + 0x00000080 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x0000000f + 0x0000000f + 0x00000013 + 0x00000013 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000001 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000213 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000e0e + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000022 + 0x00000000 + 0x00000042 + 0x000e000e + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x8000050e + 0x0000000a + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000004 + 0x0000001a + 0x00000000 + 0x00000003 + 0x00000001 + 0x00000004 + 0x0000000a + 0x00000005 + 0x0000000b + 0x00000001 + 0x00000001 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000304 + 0x00000000 + 0x000000c1 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000018 + 0x0000000f + 0x0000001c + 0x0000001c + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x0000031c + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000e0e + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000033 + 0x00000000 + 0x00000042 + 0x000e000e + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x80000713 + 0x0000000a + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008cd>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000009 + 0x00000035 + 0x00000000 + 0x00000006 + 0x00000002 + 0x00000005 + 0x0000000a + 0x00000005 + 0x0000000b + 0x00000002 + 0x00000002 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000004 + 0x00000006 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000003 + 0x0000000d + 0x0000000f + 0x00000011 + 0x00000607 + 0x00000000 + 0x00000181 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000032 + 0x0000000f + 0x00000038 + 0x00000038 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000006 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000638 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00080000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00008000 + 0x00000000 + 0x00000000 + 0x00008000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00090000 + 0x00090000 + 0x00090000 + 0x00090000 + 0x00009000 + 0x00009000 + 0x00009000 + 0x00009000 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000707 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000066 + 0x00000000 + 0x00000100 + 0x000e000e + 0x00000000 + 0x00000003 + 0x0000d2b3 + 0x80000d22 + 0x0000000a + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x000008d5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000321>; + nvidia,emc-mrs-wait-cnt = <0x0173000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000000d + 0x0000004d + 0x00000000 + 0x00000009 + 0x00000003 + 0x00000004 + 0x00000008 + 0x00000002 + 0x00000009 + 0x00000003 + 0x00000003 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000005 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000007 + 0x00020000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000001 + 0x0000000e + 0x00000010 + 0x00000012 + 0x000008e4 + 0x00000000 + 0x00000239 + 0x00000001 + 0x00000008 + 0x00000001 + 0x00000000 + 0x0000004b + 0x0000000e + 0x00000052 + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000008 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000924 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0x002c00a0 + 0x00008000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00098000 + 0x00098000 + 0x00000000 + 0x00098000 + 0x00098000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00050000 + 0x00050000 + 0x00050000 + 0x00050000 + 0x00005000 + 0x00005000 + 0x00005000 + 0x00005000 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000096 + 0x00000000 + 0x00000100 + 0x0173000e + 0x00000000 + 0x00000003 + 0x000052a3 + 0x800012d7 + 0x00000009 + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x00000895>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-mrs-wait-cnt = <0x015b000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000011 + 0x00000066 + 0x00000000 + 0x0000000c + 0x00000004 + 0x00000004 + 0x00000008 + 0x00000002 + 0x0000000a + 0x00000004 + 0x00000004 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000005 + 0x00000002 + 0x00000000 + 0x00000001 + 0x00000008 + 0x00020000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000000f + 0x00000010 + 0x00000012 + 0x00000bd1 + 0x00000000 + 0x000002f4 + 0x00000001 + 0x00000008 + 0x00000001 + 0x00000000 + 0x00000063 + 0x0000000f + 0x0000006c + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x0000000b + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000c11 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0x002c00a0 + 0x00008000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00070000 + 0x00070000 + 0x00000000 + 0x00070000 + 0x00070000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00038000 + 0x00038000 + 0x00038000 + 0x00038000 + 0x00003800 + 0x00003800 + 0x00003800 + 0x00003800 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x000000c6 + 0x00000000 + 0x00000100 + 0x015b000e + 0x00000000 + 0x00000003 + 0x000052a3 + 0x8000188b + 0x00000009 + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000941>; + nvidia,emc-mrs-wait-cnt = <0x0139000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0123133d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000018 + 0x00000088 + 0x00000000 + 0x00000010 + 0x00000006 + 0x00000006 + 0x00000009 + 0x00000002 + 0x0000000d + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000001 + 0x00000009 + 0x00030000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000010 + 0x00000012 + 0x00000014 + 0x00000fd6 + 0x00000000 + 0x000003f5 + 0x00000002 + 0x0000000b + 0x00000001 + 0x00000000 + 0x00000085 + 0x00000012 + 0x00000090 + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000010 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00001017 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0xe01200b1 + 0x00008000 + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00054000 + 0x00054000 + 0x00000000 + 0x00054000 + 0x00054000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000000c + 0x0000000c + 0x0000000c + 0x0000000c + 0x0000000c + 0x0000000c + 0x0000000c + 0x0000000c + 0x100002a0 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc085 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0606003f + 0x00000000 + 0x00000000 + 0x00000100 + 0x0139000e + 0x00000000 + 0x00000003 + 0x000042a0 + 0x80002062 + 0x0000000a + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200010>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000b61>; + nvidia,emc-mrs-wait-cnt = <0x0127000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0121113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000001b + 0x0000009b + 0x00000000 + 0x00000013 + 0x00000007 + 0x00000007 + 0x0000000b + 0x00000003 + 0x00000010 + 0x00000007 + 0x00000007 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x0000000a + 0x00000002 + 0x00000000 + 0x00000003 + 0x0000000b + 0x00070000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000002 + 0x00000012 + 0x00000016 + 0x00000018 + 0x00001208 + 0x00000000 + 0x00000482 + 0x00000002 + 0x0000000d + 0x00000001 + 0x00000000 + 0x00000097 + 0x00000015 + 0x000000a3 + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000013 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00001248 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0xe00e00b1 + 0x00008000 + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00048000 + 0x00048000 + 0x00000000 + 0x00048000 + 0x00048000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000000d + 0x0000000d + 0x0000000d + 0x0000000d + 0x0000000d + 0x0000000d + 0x0000000d + 0x0000000d + 0x100002a0 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc085 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0606003f + 0x00000000 + 0x00000000 + 0x00000100 + 0x0127000e + 0x00000000 + 0x00000003 + 0x000040a0 + 0x800024aa + 0x0000000e + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200018>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-mrs-wait-cnt = <0x00f7000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040000>; + nvidia,emc-xm2dqspadctrl2 = <0x0120113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000024 + 0x000000cd + 0x00000000 + 0x00000019 + 0x0000000a + 0x00000008 + 0x0000000d + 0x00000004 + 0x00000013 + 0x0000000a + 0x0000000a + 0x00000004 + 0x00000002 + 0x00000000 + 0x00000006 + 0x00000006 + 0x0000000b + 0x00000002 + 0x00000000 + 0x00000002 + 0x0000000d + 0x00080000 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000001 + 0x00000014 + 0x00000018 + 0x0000001a + 0x000017e2 + 0x00000000 + 0x000005f8 + 0x00000003 + 0x00000011 + 0x00000001 + 0x00000000 + 0x000000c7 + 0x00000018 + 0x000000d7 + 0x00000200 + 0x00000005 + 0x00000006 + 0x00000005 + 0x00000019 + 0x00000000 + 0x00000008 + 0x00000008 + 0x00001822 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0xe00700b1 + 0x00008000 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x007fc008 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00034000 + 0x00034000 + 0x00000000 + 0x00034000 + 0x00034000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x100002a0 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc085 + 0x00000000 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x61861820 + 0x00514514 + 0x00514514 + 0x61861800 + 0x0606003f + 0x00000000 + 0x00000000 + 0x00000100 + 0x00f7000e + 0x00000000 + 0x00000004 + 0x00004080 + 0x80003012 + 0x0000000f + >; + }; + + timing-924000000 { + clock-frequency = <924000000>; + + nvidia,emc-auto-cal-config = <0xa1430303>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200020>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000f15>; + nvidia,emc-mrs-wait-cnt = <0x00cd000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040000>; + nvidia,emc-xm2dqspadctrl2 = <0x0120113d>; + nvidia,emc-zcal-cnt-long = <0x0000004c>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000002b + 0x000000f0 + 0x00000000 + 0x0000001e + 0x0000000b + 0x00000009 + 0x0000000f + 0x00000005 + 0x00000016 + 0x0000000b + 0x0000000b + 0x00000004 + 0x00000002 + 0x00000000 + 0x00000007 + 0x00000007 + 0x0000000d + 0x00000002 + 0x00000000 + 0x00000002 + 0x0000000f + 0x000a0000 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000001 + 0x00000016 + 0x0000001a + 0x0000001c + 0x00001be7 + 0x00000000 + 0x000006f9 + 0x00000004 + 0x00000015 + 0x00000001 + 0x00000000 + 0x000000e7 + 0x0000001b + 0x000000fb + 0x00000200 + 0x00000006 + 0x00000007 + 0x00000006 + 0x0000001e + 0x00000000 + 0x0000000a + 0x0000000a + 0x00001c28 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab898 + 0xe00400b1 + 0x00008000 + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x007f800a + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0002c000 + 0x0002c000 + 0x00000000 + 0x0002c000 + 0x0002c000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000004 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x100002a0 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc085 + 0x00000000 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x5d75d720 + 0x00514514 + 0x00514514 + 0x5d75d700 + 0x0606003f + 0x00000000 + 0x00000000 + 0x00000128 + 0x00cd000e + 0x00000000 + 0x00000004 + 0x00004080 + 0x800037ea + 0x00000011 + >; + }; + + }; + }; + + memory-controller@0,70019000 { + emc-timings-3 { + nvidia,ram-code = <3>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emem-configuration = < + 0x40040001 + 0x8000000a + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000003 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0502 + 0x77e30303 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emem-configuration = < + 0x40020001 + 0x80000012 + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000003 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0502 + 0x76230303 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emem-configuration = < + 0xa0000001 + 0x80000017 + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000003 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0502 + 0x74a30303 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emem-configuration = < + 0x00000001 + 0x8000001e + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000003 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0502 + 0x74230403 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < + 0x08000001 + 0x80000026 + 0x00000001 + 0x00000001 + 0x00000003 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000003 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0503 + 0x73c30504 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < + 0x01000003 + 0x80000040 + 0x00000001 + 0x00000001 + 0x00000004 + 0x00000002 + 0x00000003 + 0x00000001 + 0x00000003 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000004 + 0x00000006 + 0x06040203 + 0x000a0504 + 0x73840a05 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emem-configuration = < + 0x08000004 + 0x80000040 + 0x00000001 + 0x00000002 + 0x00000007 + 0x00000004 + 0x00000004 + 0x00000001 + 0x00000002 + 0x00000007 + 0x00000002 + 0x00000002 + 0x00000004 + 0x00000006 + 0x06040202 + 0x000b0607 + 0x77450e08 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emem-configuration = < + 0x0f000005 + 0x80000040 + 0x00000001 + 0x00000002 + 0x00000009 + 0x00000005 + 0x00000006 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000002 + 0x00000002 + 0x00000004 + 0x00000006 + 0x06040202 + 0x000d0709 + 0x7586120a + 0x70000f03 + 0x001f0000 + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emem-configuration = < + 0x0f000007 + 0x80000040 + 0x00000002 + 0x00000003 + 0x0000000c + 0x00000007 + 0x00000008 + 0x00000001 + 0x00000002 + 0x00000009 + 0x00000002 + 0x00000002 + 0x00000005 + 0x00000006 + 0x06050202 + 0x0010090c + 0x7428180d + 0x70000f03 + 0x001f0000 + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emem-configuration = < + 0x00000009 + 0x80000040 + 0x00000003 + 0x00000004 + 0x0000000e + 0x00000009 + 0x0000000a + 0x00000001 + 0x00000003 + 0x0000000b + 0x00000002 + 0x00000002 + 0x00000005 + 0x00000007 + 0x07050202 + 0x00130b0e + 0x73a91b0f + 0x70000f03 + 0x001f0000 + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emem-configuration = < + 0x0e00000b + 0x80000040 + 0x00000004 + 0x00000005 + 0x00000013 + 0x0000000c + 0x0000000d + 0x00000002 + 0x00000003 + 0x0000000c + 0x00000002 + 0x00000002 + 0x00000006 + 0x00000008 + 0x08060202 + 0x00170e13 + 0x736c2414 + 0x70000f02 + 0x001f0000 + >; + }; + + timing-924000000 { + clock-frequency = <924000000>; + + nvidia,emem-configuration = < + 0x0e00000d + 0x80000040 + 0x00000005 + 0x00000006 + 0x00000016 + 0x0000000e + 0x0000000f + 0x00000002 + 0x00000004 + 0x0000000e + 0x00000002 + 0x00000002 + 0x00000006 + 0x00000009 + 0x09060202 + 0x001a1016 + 0x734e2a17 + 0x70000f02 + 0x001f0000 + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index dbfaba09703a..ed8a8acd3d34 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -3,6 +3,8 @@ #include <dt-bindings/input/input.h> #include "tegra124.dtsi" +#include "tegra124-jetson-tk1-emc.dtsi" + / { model = "NVIDIA Tegra124 Jetson TK1"; compatible = "nvidia,jetson-tk1", "nvidia,tegra124"; @@ -60,35 +62,35 @@ nvidia,pins = "clk_32k_out_pa0"; nvidia,function = "soc"; nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; uart3_cts_n_pa1 { nvidia,pins = "uart3_cts_n_pa1"; - nvidia,function = "uartc"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; dap2_fs_pa2 { nvidia,pins = "dap2_fs_pa2"; nvidia,function = "i2s1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; dap2_sclk_pa3 { nvidia,pins = "dap2_sclk_pa3"; nvidia,function = "i2s1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; dap2_din_pa4 { nvidia,pins = "dap2_din_pa4"; nvidia,function = "i2s1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; dap2_dout_pa5 { @@ -96,14 +98,14 @@ nvidia,function = "i2s1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; sdmmc3_clk_pa6 { nvidia,pins = "sdmmc3_clk_pa6"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc3_cmd_pa7 { nvidia,pins = "sdmmc3_cmd_pa7"; @@ -116,14 +118,14 @@ nvidia,pins = "pb0"; nvidia,function = "uartd"; nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pb1 { nvidia,pins = "pb1"; nvidia,function = "uartd"; nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc3_dat3_pb4 { @@ -156,9 +158,9 @@ }; uart3_rts_n_pc0 { nvidia,pins = "uart3_rts_n_pc0"; - nvidia,function = "uartc"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; uart2_txd_pc2 { @@ -172,7 +174,7 @@ nvidia,pins = "uart2_rxd_pc3"; nvidia,function = "irda"; nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gen1_i2c_scl_pc4 { @@ -194,44 +196,39 @@ pc7 { nvidia,pins = "pc7"; nvidia,function = "rsvd1"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pg0 { nvidia,pins = "pg0"; - nvidia,function = "rsvd1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pg1 { nvidia,pins = "pg1"; - nvidia,function = "rsvd1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pg2 { nvidia,pins = "pg2"; - nvidia,function = "rsvd1"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pg3 { nvidia,pins = "pg3"; - nvidia,function = "rsvd1"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pg4 { nvidia,pins = "pg4"; - nvidia,function = "spi4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pg5 { nvidia,pins = "pg5"; @@ -251,7 +248,7 @@ nvidia,pins = "pg7"; nvidia,function = "spi4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; ph0 { @@ -270,7 +267,6 @@ }; ph2 { nvidia,pins = "ph2"; - nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; @@ -278,57 +274,53 @@ ph3 { nvidia,pins = "ph3"; nvidia,function = "gmi"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; ph4 { nvidia,pins = "ph4"; - nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; ph5 { nvidia,pins = "ph5"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; ph6 { nvidia,pins = "ph6"; nvidia,function = "gmi"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; ph7 { nvidia,pins = "ph7"; - nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pi0 { nvidia,pins = "pi0"; - nvidia,function = "rsvd1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pi1 { nvidia,pins = "pi1"; - nvidia,function = "rsvd1"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pi2 { nvidia,pins = "pi2"; nvidia,function = "rsvd4"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pi3 { @@ -341,22 +333,21 @@ pi4 { nvidia,pins = "pi4"; nvidia,function = "gmi"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pi5 { nvidia,pins = "pi5"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pi6 { nvidia,pins = "pi6"; - nvidia,function = "rsvd1"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pi7 { @@ -368,23 +359,22 @@ }; pj0 { nvidia,pins = "pj0"; - nvidia,function = "rsvd1"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pj2 { nvidia,pins = "pj2"; nvidia,function = "rsvd1"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; uart2_cts_n_pj5 { nvidia,pins = "uart2_cts_n_pj5"; nvidia,function = "uartb"; nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; uart2_rts_n_pj6 { @@ -403,35 +393,32 @@ }; pk0 { nvidia,pins = "pk0"; - nvidia,function = "soc"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pk1 { nvidia,pins = "pk1"; - nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pk2 { nvidia,pins = "pk2"; - nvidia,function = "rsvd1"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pk3 { nvidia,pins = "pk3"; nvidia,function = "gmi"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pk4 { nvidia,pins = "pk4"; - nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; @@ -439,13 +426,12 @@ spdif_out_pk5 { nvidia,pins = "spdif_out_pk5"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; spdif_in_pk6 { nvidia,pins = "spdif_in_pk6"; - nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; @@ -459,17 +445,17 @@ }; dap1_fs_pn0 { nvidia,pins = "dap1_fs_pn0"; - nvidia,function = "i2s0"; + nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; dap1_din_pn1 { nvidia,pins = "dap1_din_pn1"; - nvidia,function = "i2s0"; + nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; dap1_dout_pn2 { nvidia,pins = "dap1_dout_pn2"; @@ -480,108 +466,104 @@ }; dap1_sclk_pn3 { nvidia,pins = "dap1_sclk_pn3"; - nvidia,function = "i2s0"; + nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; usb_vbus_en0_pn4 { nvidia,pins = "usb_vbus_en0_pn4"; nvidia,function = "usb"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; - nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; usb_vbus_en1_pn5 { nvidia,pins = "usb_vbus_en1_pn5"; nvidia,function = "usb"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; - nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; hdmi_int_pn7 { nvidia,pins = "hdmi_int_pn7"; - nvidia,function = "rsvd1"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; }; ulpi_data7_po0 { nvidia,pins = "ulpi_data7_po0"; nvidia,function = "ulpi"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; ulpi_data0_po1 { nvidia,pins = "ulpi_data0_po1"; - nvidia,function = "ulpi"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; ulpi_data1_po2 { nvidia,pins = "ulpi_data1_po2"; nvidia,function = "ulpi"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; ulpi_data2_po3 { nvidia,pins = "ulpi_data2_po3"; nvidia,function = "ulpi"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; ulpi_data3_po4 { nvidia,pins = "ulpi_data3_po4"; - nvidia,function = "ulpi"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; ulpi_data4_po5 { nvidia,pins = "ulpi_data4_po5"; nvidia,function = "ulpi"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; ulpi_data5_po6 { nvidia,pins = "ulpi_data5_po6"; nvidia,function = "ulpi"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; ulpi_data6_po7 { nvidia,pins = "ulpi_data6_po7"; nvidia,function = "ulpi"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; dap3_fs_pp0 { nvidia,pins = "dap3_fs_pp0"; nvidia,function = "i2s2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; dap3_din_pp1 { nvidia,pins = "dap3_din_pp1"; nvidia,function = "i2s2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; dap3_dout_pp2 { nvidia,pins = "dap3_dout_pp2"; - nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; @@ -595,91 +577,87 @@ }; dap4_fs_pp4 { nvidia,pins = "dap4_fs_pp4"; - nvidia,function = "i2s3"; + nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; dap4_din_pp5 { nvidia,pins = "dap4_din_pp5"; - nvidia,function = "i2s3"; + nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; dap4_dout_pp6 { nvidia,pins = "dap4_dout_pp6"; - nvidia,function = "i2s3"; + nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; dap4_sclk_pp7 { nvidia,pins = "dap4_sclk_pp7"; - nvidia,function = "i2s3"; + nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_col0_pq0 { nvidia,pins = "kb_col0_pq0"; - nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; kb_col1_pq1 { nvidia,pins = "kb_col1_pq1"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_col2_pq2 { nvidia,pins = "kb_col2_pq2"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_col3_pq3 { nvidia,pins = "kb_col3_pq3"; - nvidia,function = "kbc"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; kb_col4_pq4 { nvidia,pins = "kb_col4_pq4"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; kb_col5_pq5 { nvidia,pins = "kb_col5_pq5"; - nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; kb_col6_pq6 { nvidia,pins = "kb_col6_pq6"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_col7_pq7 { nvidia,pins = "kb_col7_pq7"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_row0_pr0 { nvidia,pins = "kb_row0_pr0"; - nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; @@ -687,121 +665,115 @@ kb_row1_pr1 { nvidia,pins = "kb_row1_pr1"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_row2_pr2 { nvidia,pins = "kb_row2_pr2"; - nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_row3_pr3 { nvidia,pins = "kb_row3_pr3"; - nvidia,function = "sys"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_row4_pr4 { nvidia,pins = "kb_row4_pr4"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; kb_row5_pr5 { nvidia,pins = "kb_row5_pr5"; nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_row6_pr6 { nvidia,pins = "kb_row6_pr6"; nvidia,function = "displaya_alt"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; kb_row7_pr7 { nvidia,pins = "kb_row7_pr7"; - nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; kb_row8_ps0 { nvidia,pins = "kb_row8_ps0"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_row9_ps1 { nvidia,pins = "kb_row9_ps1"; - nvidia,function = "rsvd2"; + nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_row10_ps2 { nvidia,pins = "kb_row10_ps2"; - nvidia,function = "rsvd2"; + nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; kb_row11_ps3 { nvidia,pins = "kb_row11_ps3"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_row12_ps4 { nvidia,pins = "kb_row12_ps4"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_row13_ps5 { nvidia,pins = "kb_row13_ps5"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_row14_ps6 { nvidia,pins = "kb_row14_ps6"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_row15_ps7 { nvidia,pins = "kb_row15_ps7"; - nvidia,function = "soc"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; kb_row16_pt0 { nvidia,pins = "kb_row16_pt0"; - nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_row17_pt1 { nvidia,pins = "kb_row17_pt1"; - nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gen2_i2c_scl_pt5 { nvidia,pins = "gen2_i2c_scl_pt5"; @@ -828,72 +800,63 @@ }; pu0 { nvidia,pins = "pu0"; - nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pu1 { nvidia,pins = "pu1"; - nvidia,function = "rsvd1"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pu2 { nvidia,pins = "pu2"; - nvidia,function = "rsvd1"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pu3 { nvidia,pins = "pu3"; - nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pu4 { nvidia,pins = "pu4"; - nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pu5 { nvidia,pins = "pu5"; - nvidia,function = "gmi"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pu6 { nvidia,pins = "pu6"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pv0 { nvidia,pins = "pv0"; - nvidia,function = "rsvd1"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pv1 { nvidia,pins = "pv1"; - nvidia,function = "rsvd1"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc3_cd_n_pv2 { nvidia,pins = "sdmmc3_cd_n_pv2"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc1_wp_n_pv3 { @@ -922,16 +885,16 @@ gpio_w2_aud_pw2 { nvidia,pins = "gpio_w2_aud_pw2"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gpio_w3_aud_pw3 { nvidia,pins = "gpio_w3_aud_pw3"; nvidia,function = "spi6"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; dap_mclk1_pw4 { nvidia,pins = "dap_mclk1_pw4"; @@ -949,17 +912,17 @@ }; uart3_txd_pw6 { nvidia,pins = "uart3_txd_pw6"; - nvidia,function = "uartc"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; uart3_rxd_pw7 { nvidia,pins = "uart3_rxd_pw7"; - nvidia,function = "uartc"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; dvfs_pwm_px0 { nvidia,pins = "dvfs_pwm_px0"; @@ -970,10 +933,9 @@ }; gpio_x1_aud_px1 { nvidia,pins = "gpio_x1_aud_px1"; - nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; dvfs_clk_px2 { nvidia,pins = "dvfs_clk_px2"; @@ -985,34 +947,32 @@ gpio_x3_aud_px3 { nvidia,pins = "gpio_x3_aud_px3"; nvidia,function = "rsvd4"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gpio_x4_aud_px4 { nvidia,pins = "gpio_x4_aud_px4"; - nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gpio_x5_aud_px5 { nvidia,pins = "gpio_x5_aud_px5"; nvidia,function = "rsvd4"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gpio_x6_aud_px6 { nvidia,pins = "gpio_x6_aud_px6"; nvidia,function = "gmi"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gpio_x7_aud_px7 { nvidia,pins = "gpio_x7_aud_px7"; - nvidia,function = "rsvd1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; @@ -1027,8 +987,8 @@ ulpi_dir_py1 { nvidia,pins = "ulpi_dir_py1"; nvidia,function = "spi1"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; ulpi_nxt_py2 { @@ -1048,44 +1008,44 @@ sdmmc1_dat3_py4 { nvidia,pins = "sdmmc1_dat3_py4"; nvidia,function = "sdmmc1"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; sdmmc1_dat2_py5 { nvidia,pins = "sdmmc1_dat2_py5"; nvidia,function = "sdmmc1"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; sdmmc1_dat1_py6 { nvidia,pins = "sdmmc1_dat1_py6"; nvidia,function = "sdmmc1"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; sdmmc1_dat0_py7 { nvidia,pins = "sdmmc1_dat0_py7"; - nvidia,function = "sdmmc1"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; sdmmc1_clk_pz0 { nvidia,pins = "sdmmc1_clk_pz0"; - nvidia,function = "sdmmc1"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; sdmmc1_cmd_pz1 { nvidia,pins = "sdmmc1_cmd_pz1"; nvidia,function = "sdmmc1"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pwr_i2c_scl_pz6 { nvidia,pins = "pwr_i2c_scl_pz6"; @@ -1184,7 +1144,6 @@ }; pbb3 { nvidia,pins = "pbb3"; - nvidia,function = "vgp3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; @@ -1198,21 +1157,18 @@ }; pbb5 { nvidia,pins = "pbb5"; - nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pbb6 { nvidia,pins = "pbb6"; - nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pbb7 { nvidia,pins = "pbb7"; - nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; @@ -1226,15 +1182,13 @@ }; pcc1 { nvidia,pins = "pcc1"; - nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pcc2 { nvidia,pins = "pcc2"; - nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; @@ -1248,8 +1202,8 @@ clk2_req_pcc5 { nvidia,pins = "clk2_req_pcc5"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pex_l0_rst_n_pdd1 { @@ -1262,15 +1216,15 @@ pex_l0_clkreq_n_pdd2 { nvidia,pins = "pex_l0_clkreq_n_pdd2"; nvidia,function = "pe0"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pex_wake_n_pdd3 { nvidia,pins = "pex_wake_n_pdd3"; nvidia,function = "pe"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pex_l1_rst_n_pdd5 { @@ -1283,8 +1237,8 @@ pex_l1_clkreq_n_pdd6 { nvidia,pins = "pex_l1_clkreq_n_pdd6"; nvidia,function = "pe1"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; clk3_out_pee0 { @@ -1297,13 +1251,12 @@ clk3_req_pee1 { nvidia,pins = "clk3_req_pee1"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; dap_mclk1_req_pee2 { nvidia,pins = "dap_mclk1_req_pee2"; - nvidia,function = "sata"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; @@ -1314,7 +1267,7 @@ nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; - nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; sdmmc3_clk_lb_out_pee4 { nvidia,pins = "sdmmc3_clk_lb_out_pee4"; @@ -1333,24 +1286,24 @@ dp_hpd_pff0 { nvidia,pins = "dp_hpd_pff0"; nvidia,function = "dp"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; usb_vbus_en2_pff1 { nvidia,pins = "usb_vbus_en2_pff1"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; pff2 { nvidia,pins = "pff2"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; core_pwr_req { @@ -1362,7 +1315,7 @@ }; cpu_pwr_req { nvidia,pins = "cpu_pwr_req"; - nvidia,function = "rsvd2"; + nvidia,function = "cpu"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; @@ -1371,7 +1324,7 @@ nvidia,pins = "pwr_int_n"; nvidia,function = "pmi"; nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; reset_out_n { @@ -1379,7 +1332,7 @@ nvidia,function = "reset_out_n"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; owr { nvidia,pins = "owr"; @@ -1391,9 +1344,9 @@ }; clk_32k_in { nvidia,pins = "clk_32k_in"; - nvidia,function = "rsvd2"; + nvidia,function = "clk"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; jtag_rtck { diff --git a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi new file mode 100644 index 000000000000..1a5748d05dda --- /dev/null +++ b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi @@ -0,0 +1,2023 @@ +/ { + clock@0,60006000 { + emc-timings-1 { + nvidia,ram-code = <1>; + + timing-12750000 { + clock-frequency = <12750000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-20400000 { + clock-frequency = <20400000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-40800000 { + clock-frequency = <40800000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-68000000 { + clock-frequency = <68000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-300000000 { + clock-frequency = <300000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C>; + clock-names = "emc-parent"; + }; + timing-396000000 { + clock-frequency = <396000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M>; + clock-names = "emc-parent"; + }; + /* TODO: Add 528MHz frequency */ + timing-600000000 { + clock-frequency = <600000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>; + clock-names = "emc-parent"; + }; + timing-792000000 { + clock-frequency = <792000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + }; + }; + + emc@0,7001b000 { + emc-timings-1 { + nvidia,ram-code = <1>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000060 + 0x00000000 + 0x00000018 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000007 + 0x0000000f + 0x00000005 + 0x00000005 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000064 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000303 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000007 + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x800001c5 + 0x0000000a + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 + 0x00000005 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x0000009a + 0x00000000 + 0x00000026 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000007 + 0x0000000f + 0x00000006 + 0x00000006 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x000000a0 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000303 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x0000000b + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x8000023a + 0x0000000a + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000001 + 0x0000000a + 0x00000000 + 0x00000001 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000134 + 0x00000000 + 0x0000004d + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000008 + 0x0000000f + 0x0000000c + 0x0000000c + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x0000013f + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000303 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000015 + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x80000370 + 0x0000000a + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000003 + 0x00000011 + 0x00000000 + 0x00000002 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000202 + 0x00000000 + 0x00000080 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x0000000f + 0x0000000f + 0x00000013 + 0x00000013 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000001 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000213 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000303 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000022 + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x8000050e + 0x0000000a + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000004 + 0x0000001a + 0x00000000 + 0x00000003 + 0x00000001 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000001 + 0x00000001 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000304 + 0x00000000 + 0x000000c1 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000018 + 0x0000000f + 0x0000001c + 0x0000001c + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000003 + 0x00000000 + 0x00000005 + 0x00000005 + 0x0000031c + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000303 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000033 + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x80000713 + 0x0000000a + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x0000088d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000009 + 0x00000035 + 0x00000000 + 0x00000007 + 0x00000002 + 0x00000005 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000002 + 0x00000002 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000004 + 0x00000006 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000003 + 0x0000000d + 0x0000000f + 0x00000011 + 0x00000607 + 0x00000000 + 0x00000181 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000032 + 0x0000000f + 0x00000038 + 0x00000038 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000007 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000638 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00004000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00090000 + 0x00090000 + 0x00094000 + 0x00094000 + 0x00009400 + 0x00009000 + 0x00009000 + 0x00009000 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000303 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000066 + 0x00000000 + 0x00000100 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000d2b3 + 0x80000d22 + 0x0000000a + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x000008d5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000321>; + nvidia,emc-mrs-wait-cnt = <0x0174000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000000d + 0x0000004c + 0x00000000 + 0x00000009 + 0x00000003 + 0x00000004 + 0x00000008 + 0x00000002 + 0x00000009 + 0x00000003 + 0x00000003 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000005 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000007 + 0x00020000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000001 + 0x0000000e + 0x00000010 + 0x00000012 + 0x000008e4 + 0x00000000 + 0x00000239 + 0x00000001 + 0x00000008 + 0x00000001 + 0x00000000 + 0x0000004a + 0x0000000e + 0x00000051 + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000009 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000924 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0x002c00a0 + 0x00008000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00098000 + 0x00098000 + 0x00000000 + 0x00098000 + 0x00098000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00060000 + 0x00060000 + 0x00060000 + 0x00060000 + 0x00006000 + 0x00006000 + 0x00006000 + 0x00006000 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000101 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000096 + 0x00000000 + 0x00000100 + 0x0174000c + 0x00000000 + 0x00000003 + 0x000052a3 + 0x800012d7 + 0x00000009 + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x00000895>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-mrs-wait-cnt = <0x015b000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000012 + 0x00000065 + 0x00000000 + 0x0000000c + 0x00000004 + 0x00000005 + 0x00000008 + 0x00000002 + 0x0000000a + 0x00000004 + 0x00000004 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000005 + 0x00000002 + 0x00000000 + 0x00000001 + 0x00000008 + 0x00020000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000000f + 0x00000010 + 0x00000012 + 0x00000bd1 + 0x00000000 + 0x000002f4 + 0x00000001 + 0x00000008 + 0x00000001 + 0x00000000 + 0x00000063 + 0x0000000f + 0x0000006b + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x0000000d + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000c11 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0x002c00a0 + 0x00008000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00070000 + 0x00070000 + 0x00000000 + 0x00070000 + 0x00070000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00048000 + 0x00048000 + 0x00048000 + 0x00048000 + 0x00004800 + 0x00004800 + 0x00004800 + 0x00004800 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000101 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x000000c6 + 0x00000000 + 0x00000100 + 0x015b000c + 0x00000000 + 0x00000003 + 0x000052a3 + 0x8000188b + 0x00000009 + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200010>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000b61>; + nvidia,emc-mrs-wait-cnt = <0x0128000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0121113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000001c + 0x0000009a + 0x00000000 + 0x00000013 + 0x00000007 + 0x00000007 + 0x0000000b + 0x00000003 + 0x00000010 + 0x00000007 + 0x00000007 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x0000000a + 0x00000002 + 0x00000000 + 0x00000003 + 0x0000000b + 0x00070000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000002 + 0x00000012 + 0x00000016 + 0x00000018 + 0x00001208 + 0x00000000 + 0x00000482 + 0x00000002 + 0x0000000d + 0x00000001 + 0x00000000 + 0x00000096 + 0x00000015 + 0x000000a2 + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000015 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00001249 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0xe00e00b1 + 0x00008000 + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00048000 + 0x00048000 + 0x00000000 + 0x00048000 + 0x00048000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x00000004 + 0x00000002 + 0x00000005 + 0x00000006 + 0x00000003 + 0x00000006 + 0x00000005 + 0x00000004 + 0x00000004 + 0x00000002 + 0x00000005 + 0x00000006 + 0x00000003 + 0x00000006 + 0x00000005 + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x100002a0 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc085 + 0x00000101 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0606003f + 0x00000000 + 0x00000000 + 0x00000100 + 0x0128000c + 0x00000000 + 0x00000003 + 0x000040a0 + 0x800024aa + 0x0000000e + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0080089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200418>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-mrs-wait-cnt = <0x00f8000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040000>; + nvidia,emc-xm2dqspadctrl2 = <0x0120113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000025 + 0x000000cc + 0x00000000 + 0x0000001a + 0x00000009 + 0x00000008 + 0x0000000d + 0x00000004 + 0x00000013 + 0x00000009 + 0x00000009 + 0x00000003 + 0x00000002 + 0x00000000 + 0x00000006 + 0x00000006 + 0x0000000b + 0x00000002 + 0x00000000 + 0x00000002 + 0x0000000d + 0x00080000 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000001 + 0x00000014 + 0x00000018 + 0x0000001a + 0x000017e2 + 0x00000000 + 0x000005f8 + 0x00000003 + 0x00000011 + 0x00000001 + 0x00000000 + 0x000000c6 + 0x00000018 + 0x000000d6 + 0x00000200 + 0x00000005 + 0x00000006 + 0x00000005 + 0x0000001d + 0x00000000 + 0x00000008 + 0x00000008 + 0x00001822 + 0x00000000 + 0x80000005 + 0x00000000 + 0x104ab198 + 0xe00700b1 + 0x00008000 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000005 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00034000 + 0x00034000 + 0x00000000 + 0x00034000 + 0x00034000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000008 + 0x00000008 + 0x00000005 + 0x00000009 + 0x00000009 + 0x00000007 + 0x00000009 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000005 + 0x00000009 + 0x00000009 + 0x00000007 + 0x00000009 + 0x00000008 + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x100002a0 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc085 + 0x00000101 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x61861820 + 0x00514514 + 0x00514514 + 0x61861800 + 0x0606003f + 0x00000000 + 0x00000000 + 0x00000100 + 0x00f8000c + 0x00000007 + 0x00000004 + 0x00004080 + 0x80003012 + 0x0000000f + >; + }; + + }; + }; + + memory-controller@0,70019000 { + emc-timings-1 { + nvidia,ram-code = <1>; + + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emem-configuration = < + 0x40040001 + 0x8000000a + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0402 + 0x77e30303 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emem-configuration = < + 0x40020001 + 0x80000012 + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0402 + 0x76230303 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emem-configuration = < + 0xa0000001 + 0x80000017 + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0402 + 0x74a30303 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emem-configuration = < + 0x00000001 + 0x8000001e + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0402 + 0x74230403 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < + 0x08000001 + 0x80000026 + 0x00000001 + 0x00000001 + 0x00000003 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0403 + 0x73c30504 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < + 0x01000003 + 0x80000040 + 0x00000001 + 0x00000001 + 0x00000005 + 0x00000002 + 0x00000004 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000004 + 0x00000006 + 0x06040203 + 0x000a0405 + 0x73840a06 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emem-configuration = < + 0x08000004 + 0x80000040 + 0x00000001 + 0x00000002 + 0x00000007 + 0x00000004 + 0x00000005 + 0x00000001 + 0x00000002 + 0x00000007 + 0x00000002 + 0x00000002 + 0x00000004 + 0x00000006 + 0x06040202 + 0x000b0607 + 0x77450e08 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emem-configuration = < + 0x0f000005 + 0x80000040 + 0x00000001 + 0x00000002 + 0x00000009 + 0x00000005 + 0x00000007 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000002 + 0x00000002 + 0x00000004 + 0x00000006 + 0x06040202 + 0x000d0709 + 0x7586120a + 0x70000f03 + 0x001f0000 + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emem-configuration = < + 0x00000009 + 0x80000040 + 0x00000003 + 0x00000004 + 0x0000000e + 0x00000009 + 0x0000000b + 0x00000001 + 0x00000003 + 0x0000000b + 0x00000002 + 0x00000002 + 0x00000005 + 0x00000007 + 0x07050202 + 0x00130b0e + 0x73a91b0f + 0x70000f03 + 0x001f0000 + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emem-configuration = < + 0x0e00000b + 0x80000040 + 0x00000004 + 0x00000005 + 0x00000013 + 0x0000000c + 0x0000000f + 0x00000002 + 0x00000003 + 0x0000000c + 0x00000002 + 0x00000002 + 0x00000006 + 0x00000008 + 0x08060202 + 0x00160d13 + 0x734c2414 + 0x70000f02 + 0x001f0000 + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts index 004e8e4e1c04..2d21253ea4e3 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big.dts +++ b/arch/arm/boot/dts/tegra124-nyan-big.dts @@ -1,46 +1,29 @@ /dts-v1/; -#include <dt-bindings/input/input.h> -#include "tegra124.dtsi" +#include "tegra124-nyan.dtsi" + +#include "tegra124-nyan-big-emc.dtsi" / { model = "Acer Chromebook 13 CB5-311"; compatible = "google,nyan-big", "nvidia,tegra124"; - aliases { - rtc0 = "/i2c@0,7000d000/pmic@40"; - rtc1 = "/rtc@0,7000e000"; - serial0 = &uarta; - }; + panel: panel { + compatible = "auo,b133xtn01"; - memory { - reg = <0x0 0x80000000 0x0 0x80000000>; + backlight = <&backlight>; + ddc-i2c-bus = <&dpaux>; }; - host1x@0,50000000 { - hdmi@0,54280000 { - status = "okay"; - - vdd-supply = <&vdd_3v3_hdmi>; - pll-supply = <&vdd_hdmi_pll>; - hdmi-supply = <&vdd_5v0_hdmi>; - - nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = - <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; - }; - - sor@0,54540000 { - status = "okay"; - - nvidia,dpaux = <&dpaux>; - nvidia,panel = <&panel>; - }; + sdhci@0,700b0400 { /* SD Card on this bus */ + wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; + }; - dpaux@0,545c0000 { - vdd-supply = <&vdd_3v3_panel>; - status = "okay"; - }; + sound { + compatible = "nvidia,tegra-audio-max98090-nyan-big", + "nvidia,tegra-audio-max98090-nyan", + "nvidia,tegra-audio-max98090"; + nvidia,model = "GoogleNyanBig"; }; pinmux@0,70000868 { @@ -48,1092 +31,1308 @@ pinctrl-0 = <&pinmux_default>; pinmux_default: common { - dap_mclk1_pw4 { - nvidia,pins = "dap_mclk1_pw4"; - nvidia,function = "extperiph1"; + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2"; + nvidia,function = "i2s1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_sclk_pa3 { + nvidia,pins = "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; dap2_din_pa4 { nvidia,pins = "dap2_din_pa4"; nvidia,function = "i2s1"; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; dap2_dout_pa5 { - nvidia,pins = "dap2_dout_pa5", - "dap2_fs_pa2", - "dap2_sclk_pa3"; + nvidia,pins = "dap2_dout_pa5"; nvidia,function = "i2s1"; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dvfs_pwm_px0 { - nvidia,pins = "dvfs_pwm_px0", - "dvfs_clk_px2"; - nvidia,function = "cldvfs"; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_clk_py0 { - nvidia,pins = "ulpi_clk_py0", - "ulpi_nxt_py2", - "ulpi_stp_py3"; - nvidia,function = "spi1"; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pb0 { + nvidia,pins = "pb0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pb1 { + nvidia,pins = "pb1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat3_pb4 { + nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat2_pb5 { + nvidia,pins = "sdmmc3_dat2_pb5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat1_pb6 { + nvidia,pins = "sdmmc3_dat1_pb6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat0_pb7 { + nvidia,pins = "sdmmc3_dat0_pb7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; - ulpi_dir_py1 { - nvidia,pins = "ulpi_dir_py1"; - nvidia,function = "spi1"; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pc7 { + nvidia,pins = "pc7"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - cam_i2c_scl_pbb1 { - nvidia,pins = "cam_i2c_scl_pbb1", - "cam_i2c_sda_pbb2"; - nvidia,function = "i2c3"; + pg0 { + nvidia,pins = "pg0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pg1 { + nvidia,pins = "pg1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,lock = <TEGRA_PIN_DISABLE>; - nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - gen2_i2c_scl_pt5 { - nvidia,pins = "gen2_i2c_scl_pt5", - "gen2_i2c_sda_pt6"; - nvidia,function = "i2c2"; + pg2 { + nvidia,pins = "pg2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pg3 { + nvidia,pins = "pg3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,lock = <TEGRA_PIN_DISABLE>; - nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pg4 { - nvidia,pins = "pg4", - "pg5", - "pg6", - "pi3"; + nvidia,pins = "pg4"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg5 { + nvidia,pins = "pg5"; nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg6 { + nvidia,pins = "pg6"; + nvidia,function = "spi4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pg7 { nvidia,pins = "pg7"; nvidia,function = "spi4"; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ph0 { + nvidia,pins = "ph0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; ph1 { nvidia,pins = "ph1"; nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph2 { + nvidia,pins = "ph2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - pk0 { - nvidia,pins = "pk0", - "kb_row15_ps7", - "clk_32k_out_pa0"; - nvidia,function = "soc"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; + ph3 { + nvidia,pins = "ph3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph4 { + nvidia,pins = "ph4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_clk_pz0 { - nvidia,pins = "sdmmc1_clk_pz0"; - nvidia,function = "sdmmc1"; + ph5 { + nvidia,pins = "ph5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph6 { + nvidia,pins = "ph6"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_cmd_pz1 { - nvidia,pins = "sdmmc1_cmd_pz1", - "sdmmc1_dat0_py7", - "sdmmc1_dat1_py6", - "sdmmc1_dat2_py5", - "sdmmc1_dat3_py4"; - nvidia,function = "sdmmc1"; + ph7 { + nvidia,pins = "ph7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi0 { + nvidia,pins = "pi0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pi1 { + nvidia,pins = "pi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pi2 { + nvidia,pins = "pi2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi3 { + nvidia,pins = "pi3"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi4 { + nvidia,pins = "pi4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi5 { + nvidia,pins = "pi5"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - sdmmc3_clk_pa6 { - nvidia,pins = "sdmmc3_clk_pa6"; - nvidia,function = "sdmmc3"; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + pi6 { + nvidia,pins = "pi6"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_cmd_pa7 { - nvidia,pins = "sdmmc3_cmd_pa7", - "sdmmc3_dat0_pb7", - "sdmmc3_dat1_pb6", - "sdmmc3_dat2_pb5", - "sdmmc3_dat3_pb4", - "kb_col4_pq4", - "sdmmc3_clk_lb_out_pee4", - "sdmmc3_clk_lb_in_pee5", - "sdmmc3_cd_n_pv2"; - nvidia,function = "sdmmc3"; + pi7 { + nvidia,pins = "pi7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pj0 { + nvidia,pins = "pj0"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4"; - nvidia,function = "sdmmc4"; + pj2 { + nvidia,pins = "pj2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pj7 { + nvidia,pins = "pj7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pk0 { + nvidia,pins = "pk0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk1 { + nvidia,pins = "pk1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - sdmmc4_cmd_pt7 { - nvidia,pins = "sdmmc4_cmd_pt7", - "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; - nvidia,function = "sdmmc4"; + pk2 { + nvidia,pins = "pk2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pk3 { + nvidia,pins = "pk3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk4 { + nvidia,pins = "pk4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - pwr_i2c_scl_pz6 { - nvidia,pins = "pwr_i2c_scl_pz6", - "pwr_i2c_sda_pz7"; - nvidia,function = "i2cpwr"; + spdif_out_pk5 { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk7 { + nvidia,pins = "pk7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_fs_pn0 { + nvidia,pins = "dap1_fs_pn0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_sclk_pn3 { + nvidia,pins = "dap1_sclk_pn3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "usb"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; - jtag_rtck { - nvidia,pins = "jtag_rtck"; - nvidia,function = "rtck"; + usb_vbus_en1_pn5 { + nvidia,pins = "usb_vbus_en1_pn5"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + ulpi_data7_po0 { + nvidia,pins = "ulpi_data7_po0"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data0_po1 { + nvidia,pins = "ulpi_data0_po1"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data1_po2 { + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data2_po3 { + nvidia,pins = "ulpi_data2_po3"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data3_po4 { + nvidia,pins = "ulpi_data3_po4"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data4_po5 { + nvidia,pins = "ulpi_data4_po5"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data5_po6 { + nvidia,pins = "ulpi_data5_po6"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data6_po7 { + nvidia,pins = "ulpi_data6_po7"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_din_pp1 { + nvidia,pins = "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_dout_pp2 { + nvidia,pins = "dap3_dout_pp2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_sclk_pp3 { + nvidia,pins = "dap3_sclk_pp3"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_fs_pp4 { + nvidia,pins = "dap4_fs_pp4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_dout_pp6 { + nvidia,pins = "dap4_dout_pp6"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_sclk_pp7 { + nvidia,pins = "dap4_sclk_pp7"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col1_pq1 { + nvidia,pins = "kb_col1_pq1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col2_pq2 { + nvidia,pins = "kb_col2_pq2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col3_pq3 { + nvidia,pins = "kb_col3_pq3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4"; + nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - clk_32k_in { - nvidia,pins = "clk_32k_in"; - nvidia,function = "clk"; + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col6_pq6 { + nvidia,pins = "kb_col6_pq6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col7_pq7 { + nvidia,pins = "kb_col7_pq7"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - core_pwr_req { - nvidia,pins = "core_pwr_req"; - nvidia,function = "pwron"; + kb_row0_pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row1_pr1 { + nvidia,pins = "kb_row1_pr1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - cpu_pwr_req { - nvidia,pins = "cpu_pwr_req"; - nvidia,function = "cpu"; + kb_row2_pr2 { + nvidia,pins = "kb_row2_pr2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row4_pr4 { + nvidia,pins = "kb_row4_pr4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - pwr_int_n { - nvidia,pins = "pwr_int_n"; - nvidia,function = "pmi"; + kb_row5_pr5 { + nvidia,pins = "kb_row5_pr5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row6_pr6 { + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; - nvidia,pull = <TEGRA_PIN_PULL_UP>; + }; + kb_row8_ps0 { + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - reset_out_n { - nvidia,pins = "reset_out_n"; - nvidia,function = "reset_out_n"; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row11_ps3 { + nvidia,pins = "kb_row11_ps3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row12_ps4 { + nvidia,pins = "kb_row12_ps4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - clk3_out_pee0 { - nvidia,pins = "clk3_out_pee0"; - nvidia,function = "extperiph3"; + kb_row13_ps5 { + nvidia,pins = "kb_row13_ps5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row14_ps6 { + nvidia,pins = "kb_row14_ps6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row15_ps7 { + nvidia,pins = "kb_row15_ps7"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - gen1_i2c_sda_pc5 { - nvidia,pins = "gen1_i2c_sda_pc5", - "gen1_i2c_scl_pc4"; - nvidia,function = "i2c1"; + kb_row16_pt0 { + nvidia,pins = "kb_row16_pt0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row17_pt1 { + nvidia,pins = "kb_row17_pt1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "i2c2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; - hdmi_cec_pee3 { - nvidia,pins = "hdmi_cec_pee3"; - nvidia,function = "cec"; + gen2_i2c_sda_pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7"; + nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,lock = <TEGRA_PIN_DISABLE>; - nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - hdmi_int_pn7 { - nvidia,pins = "hdmi_int_pn7"; + pu0 { + nvidia,pins = "pu0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu1 { + nvidia,pins = "pu1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu2 { + nvidia,pins = "pu2"; nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu4 { + nvidia,pins = "pu4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu5 { + nvidia,pins = "pu5"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu6 { + nvidia,pins = "pu6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv0 { + nvidia,pins = "pv0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cd_n_pv2 { + nvidia,pins = "sdmmc3_cd_n_pv2"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_wp_n_pv3 { + nvidia,pins = "sdmmc1_wp_n_pv3"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; ddc_scl_pv4 { - nvidia,pins = "ddc_scl_pv4", - "ddc_sda_pv5"; + nvidia,pins = "ddc_scl_pv4"; nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + ddc_sda_pv5 { + nvidia,pins = "ddc_sda_pv5"; + nvidia,function = "i2c4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,lock = <TEGRA_PIN_DISABLE>; - nvidia,rcv-sel = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; }; - kb_row10_ps2 { - nvidia,pins = "kb_row10_ps2"; - nvidia,function = "uarta"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; + gpio_w2_aud_pw2 { + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_w3_aud_pw3 { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - kb_row9_ps1 { - nvidia,pins = "kb_row9_ps1"; - nvidia,function = "uarta"; + dap_mclk1_pw4 { + nvidia,pins = "dap_mclk1_pw4"; + nvidia,function = "extperiph1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - usb_vbus_en0_pn4 { - nvidia,pins = "usb_vbus_en0_pn4", - "usb_vbus_en1_pn5"; - nvidia,function = "usb"; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_txd_pw6 { + nvidia,pins = "uart3_txd_pw6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_rxd_pw7 { + nvidia,pins = "uart3_rxd_pw7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x1_aud_px1 { + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dvfs_clk_px2 { + nvidia,pins = "dvfs_clk_px2"; + nvidia,function = "cldvfs"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,lock = <TEGRA_PIN_DISABLE>; - nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - drive_sdio1 { - nvidia,pins = "drive_sdio1"; - nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; - nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,pull-down-strength = <36>; - nvidia,pull-up-strength = <20>; - nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>; - nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>; - }; - drive_sdio3 { - nvidia,pins = "drive_sdio3"; - nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; - nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,pull-down-strength = <22>; - nvidia,pull-up-strength = <36>; - nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; - nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; - }; - drive_gma { - nvidia,pins = "drive_gma"; - nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; - nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,pull-down-strength = <2>; - nvidia,pull-up-strength = <1>; - nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; - nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; - nvidia,drive-type = <1>; - }; - codec_irq_l { - nvidia,pins = "ph4"; - nvidia,function = "gmi"; + gpio_x3_aud_px3 { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x4_aud_px4 { + nvidia,pins = "gpio_x4_aud_px4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - lcd_bl_en { - nvidia,pins = "ph2"; + gpio_x5_aud_px5 { + nvidia,pins = "gpio_x5_aud_px5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x6_aud_px6 { + nvidia,pins = "gpio_x6_aud_px6"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x7_aud_px7 { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - touch_irq_l { - nvidia,pins = "gpio_w3_aud_pw3"; - nvidia,function = "spi6"; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0"; + nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - tpm_davint_l { - nvidia,pins = "ph6"; - nvidia,function = "gmi"; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - ts_irq_l { - nvidia,pins = "pk2"; - nvidia,function = "gmi"; + ulpi_nxt_py2 { + nvidia,pins = "ulpi_nxt_py2"; + nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ts_reset_l { - nvidia,pins = "pk4"; - nvidia,function = "gmi"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ts_shdn_l { - nvidia,pins = "pk1"; - nvidia,function = "gmi"; + sdmmc1_dat3_py4 { + nvidia,pins = "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - ph7 { - nvidia,pins = "ph7"; - nvidia,function = "gmi"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; + sdmmc1_dat2_py5 { + nvidia,pins = "sdmmc1_dat2_py5"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - kb_col0_ap { - nvidia,pins = "kb_col0_pq0"; - nvidia,function = "rsvd4"; + sdmmc1_dat1_py6 { + nvidia,pins = "sdmmc1_dat1_py6"; + nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - lid_open { - nvidia,pins = "kb_row4_pr4"; - nvidia,function = "rsvd3"; + sdmmc1_dat0_py7 { + nvidia,pins = "sdmmc1_dat0_py7"; + nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - en_vdd_sd { - nvidia,pins = "kb_row0_pr0"; - nvidia,function = "rsvd4"; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - ac_ok { - nvidia,pins = "pj0"; - nvidia,function = "gmi"; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1"; + nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sensor_irq_l { - nvidia,pins = "pi6"; - nvidia,function = "gmi"; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6"; + nvidia,function = "i2cpwr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; - wifi_en { - nvidia,pins = "gpio_x7_aud_px7"; - nvidia,function = "rsvd4"; + pwr_i2c_sda_pz7 { + nvidia,pins = "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat1_paa1 { + nvidia,pins = "sdmmc4_dat1_paa1"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat2_paa2 { + nvidia,pins = "sdmmc4_dat2_paa2"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat3_paa3 { + nvidia,pins = "sdmmc4_dat3_paa3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat4_paa4 { + nvidia,pins = "sdmmc4_dat4_paa4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat5_paa5 { + nvidia,pins = "sdmmc4_dat5_paa5"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat6_paa6 { + nvidia,pins = "sdmmc4_dat6_paa6"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat7_paa7 { + nvidia,pins = "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pbb0 { + nvidia,pins = "pbb0"; + nvidia,function = "vgp6"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - en_vdd_bl { - nvidia,pins = "dap3_dout_pp2"; - nvidia,function = "i2s2"; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_sda_pbb2 { + nvidia,pins = "cam_i2c_sda_pbb2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pbb3 { + nvidia,pins = "pbb3"; + nvidia,function = "vgp3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb6 { + nvidia,pins = "pbb6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb7 { + nvidia,pins = "pbb7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc1 { + nvidia,pins = "pcc1"; + nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc2 { + nvidia,pins = "pcc2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - en_vdd_hdmi { - nvidia,pins = "spdif_in_pk6"; - nvidia,function = "spdif"; + pex_l0_rst_n_pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l0_clkreq_n_pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_wake_n_pdd3 { + nvidia,pins = "pex_wake_n_pdd3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l1_rst_n_pdd5 { + nvidia,pins = "pex_l1_rst_n_pdd5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l1_clkreq_n_pdd6 { + nvidia,pins = "pex_l1_clkreq_n_pdd6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap_mclk1_req_pee2 { + nvidia,pins = "dap_mclk1_req_pee2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_lb_out_pee4 { + nvidia,pins = "sdmmc3_clk_lb_out_pee4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - soc_warm_reset_l { - nvidia,pins = "pi5"; - nvidia,function = "gmi"; + sdmmc3_clk_lb_in_pee5 { + nvidia,pins = "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - hp_det_l { - nvidia,pins = "pi7"; - nvidia,function = "rsvd1"; + dp_hpd_pff0 { + nvidia,pins = "dp_hpd_pff0"; + nvidia,function = "dp"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - mic_det_l { - nvidia,pins = "kb_row7_pr7"; + usb_vbus_en2_pff1 { + nvidia,pins = "usb_vbus_en2_pff1"; nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pff2 { + nvidia,pins = "pff2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - }; - }; - - serial@0,70006000 { - /* Debug connector on the bottom of the board near SD card. */ - status = "okay"; - }; - - pwm@0,7000a000 { - status = "okay"; - }; - - i2c@0,7000c000 { - status = "okay"; - clock-frequency = <100000>; - - acodec: audio-codec@10 { - compatible = "maxim,max98090"; - reg = <0x10>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; - }; - - temperature-sensor@4c { - compatible = "ti,tmp451"; - reg = <0x4c>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; - - #thermal-sensor-cells = <1>; - }; - }; - - i2c@0,7000c400 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@0,7000c500 { - status = "okay"; - clock-frequency = <400000>; - - tpm@20 { - compatible = "infineon,slb9645tt"; - reg = <0x20>; - }; - }; - - hdmi_ddc: i2c@0,7000c700 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@0,7000d000 { - status = "okay"; - clock-frequency = <400000>; - - pmic: pmic@40 { - compatible = "ams,as3722"; - reg = <0x40>; - interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; - - ams,system-power-controller; - - #interrupt-cells = <2>; - interrupt-controller; - - gpio-controller; - #gpio-cells = <2>; - - pinctrl-names = "default"; - pinctrl-0 = <&as3722_default>; - - as3722_default: pinmux { - gpio0 { - pins = "gpio0"; - function = "gpio"; - bias-pull-down; - }; - - gpio1 { - pins = "gpio1"; - function = "gpio"; - bias-pull-up; - }; - - gpio2_4_7 { - pins = "gpio2", "gpio4", "gpio7"; - function = "gpio"; - bias-pull-up; - }; - - gpio3_6 { - pins = "gpio3", "gpio6"; - bias-high-impedance; - }; - - gpio5 { - pins = "gpio5"; - function = "clk32k-out"; - bias-pull-down; - }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - - regulators { - vsup-sd2-supply = <&vdd_5v0_sys>; - vsup-sd3-supply = <&vdd_5v0_sys>; - vsup-sd4-supply = <&vdd_5v0_sys>; - vsup-sd5-supply = <&vdd_5v0_sys>; - vin-ldo0-supply = <&vdd_1v35_lp0>; - vin-ldo1-6-supply = <&vdd_3v3_run>; - vin-ldo2-5-7-supply = <&vddio_1v8>; - vin-ldo3-4-supply = <&vdd_3v3_sys>; - vin-ldo9-10-supply = <&vdd_5v0_sys>; - vin-ldo11-supply = <&vdd_3v3_run>; - - sd0 { - regulator-name = "+VDD_CPU_AP"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1350000>; - regulator-min-microamp = <3500000>; - regulator-max-microamp = <3500000>; - regulator-always-on; - regulator-boot-on; - ams,ext-control = <2>; - }; - - sd1 { - regulator-name = "+VDD_CORE"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1350000>; - regulator-min-microamp = <2500000>; - regulator-max-microamp = <4000000>; - regulator-always-on; - regulator-boot-on; - ams,ext-control = <1>; - }; - - vdd_1v35_lp0: sd2 { - regulator-name = "+1.35V_LP0(sd2)"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - sd3 { - regulator-name = "+1.35V_LP0(sd3)"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_1v05_run: sd4 { - regulator-name = "+1.05V_RUN"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - vddio_1v8: sd5 { - regulator-name = "+1.8V_VDDIO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - sd6 { - regulator-name = "+VDD_GPU_AP"; - regulator-min-microvolt = <650000>; - regulator-max-microvolt = <1200000>; - regulator-min-microamp = <3500000>; - regulator-max-microamp = <3500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo0 { - regulator-name = "+1.05V_RUN_AVDD"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - regulator-boot-on; - regulator-always-on; - ams,ext-control = <1>; - }; - - ldo1 { - regulator-name = "+1.8V_RUN_CAM"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo2 { - regulator-name = "+1.2V_GEN_AVDD"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo3 { - regulator-name = "+1.00V_LP0_VDD_RTC"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-boot-on; - regulator-always-on; - ams,enable-tracking; - }; - - vdd_run_cam: ldo4 { - regulator-name = "+3.3V_RUN_CAM"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo5 { - regulator-name = "+1.2V_RUN_CAM_FRONT"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - vddio_sdmmc3: ldo6 { - regulator-name = "+VDDIO_SDMMC3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - ldo7 { - regulator-name = "+1.05V_RUN_CAM_REAR"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - ldo9 { - regulator-name = "+2.8V_RUN_TOUCH"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo10 { - regulator-name = "+2.8V_RUN_CAM_AF"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo11 { - regulator-name = "+1.8V_RUN_VPP_FUSE"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; + owr { + nvidia,pins = "owr"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; }; - }; - }; - - spi@0,7000d400 { - status = "okay"; - - cros_ec: cros-ec@0 { - compatible = "google,cros-ec-spi"; - spi-max-frequency = <3000000>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>; - reg = <0>; - - google,cros-ec-spi-msg-delay = <2000>; - - i2c-tunnel { - compatible = "google,cros-ec-i2c-tunnel"; - #address-cells = <1>; - #size-cells = <0>; - - google,remote-bus = <0>; - - charger: bq24735@9 { - compatible = "ti,bq24735"; - reg = <0x9>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(J, 0) - GPIO_ACTIVE_HIGH>; - ti,ac-detect-gpios = <&gpio - TEGRA_GPIO(J, 0) - GPIO_ACTIVE_HIGH>; - }; - - battery: sbs-battery@b { - compatible = "sbs,sbs-battery"; - reg = <0xb>; - sbs,i2c-retry-count = <2>; - sbs,poll-retry-count = <10>; - power-supplies = <&charger>; - }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "rtck"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; }; }; - - spi@0,7000da00 { - status = "okay"; - spi-max-frequency = <25000000>; - - flash@0 { - compatible = "winbond,w25q32dw"; - reg = <0>; - }; - }; - - pmc@0,7000e400 { - nvidia,invert-interrupt; - nvidia,suspend-mode = <0>; - nvidia,cpu-pwr-good-time = <500>; - nvidia,cpu-pwr-off-time = <300>; - nvidia,core-pwr-good-time = <641 3845>; - nvidia,core-pwr-off-time = <61036>; - nvidia,core-power-req-active-high; - nvidia,sys-clock-req-active-high; - }; - - hda@0,70030000 { - status = "okay"; - }; - - sdhci@0,700b0000 { /* WiFi/BT on this bus */ - status = "okay"; - power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>; - bus-width = <4>; - no-1-8-v; - non-removable; - }; - - sdhci@0,700b0400 { /* SD Card on this bus */ - status = "okay"; - cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; - power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; - wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; - bus-width = <4>; - no-1-8-v; - vqmmc-supply = <&vddio_sdmmc3>; - }; - - sdhci@0,700b0600 { /* eMMC on this bus */ - status = "okay"; - bus-width = <8>; - no-1-8-v; - non-removable; - }; - - ahub@0,70300000 { - i2s@0,70301100 { - status = "okay"; - }; - }; - - usb@0,7d000000 { /* Rear external USB port. */ - status = "okay"; - }; - - usb-phy@0,7d000000 { - status = "okay"; - vbus-supply = <&vdd_usb1_vbus>; - }; - - usb@0,7d004000 { /* Internal webcam. */ - status = "okay"; - }; - - usb-phy@0,7d004000 { - status = "okay"; - vbus-supply = <&vdd_run_cam>; - }; - - usb@0,7d008000 { /* Left external USB port. */ - status = "okay"; - }; - - usb-phy@0,7d008000 { - status = "okay"; - vbus-supply = <&vdd_usb3_vbus>; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - - enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; - power-supply = <&vdd_led>; - pwms = <&pwm 1 1000000>; - - default-brightness-level = <224>; - brightness-levels = - < 0 1 2 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255 - 256>; - }; - - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - lid { - label = "Lid"; - gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>; - linux,input-type = <5>; - linux,code = <KEY_RESERVED>; - debounce-interval = <1>; - gpio-key,wakeup; - }; - - power { - label = "Power"; - gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - debounce-interval = <30>; - gpio-key,wakeup; - }; - }; - - panel: panel { - compatible = "auo,b133xtn01"; - - backlight = <&backlight>; - ddc-i2c-bus = <&dpaux>; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_mux: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "+VDD_MUX"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_5v0_sys: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "+5V_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_mux>; - }; - - vdd_3v3_sys: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "+3.3V_SYS"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_mux>; - }; - - vdd_3v3_run: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "+3.3V_RUN"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; - - vdd_3v3_hdmi: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vdd_3v3_run>; - }; - - vdd_led: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "+VDD_LED"; - gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_mux>; - }; - - vdd_5v0_ts: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "+5V_VDD_TS_SW"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; - - vdd_usb1_vbus: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "+5V_USB_HS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - vin-supply = <&vdd_5v0_sys>; - }; - - vdd_usb3_vbus: regulator@8 { - compatible = "regulator-fixed"; - reg = <8>; - regulator-name = "+5V_USB_SS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - vin-supply = <&vdd_5v0_sys>; - }; - - vdd_3v3_panel: regulator@9 { - compatible = "regulator-fixed"; - reg = <9>; - regulator-name = "+3.3V_PANEL"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pmic 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_run>; - }; - - vdd_3v3_lp0: regulator@10 { - compatible = "regulator-fixed"; - reg = <10>; - regulator-name = "+3.3V_LP0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - /* - * TODO: find a way to wire this up with the USB EHCI - * controllers so that it can be enabled on demand. - */ - regulator-always-on; - gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; - - vdd_hdmi_pll: regulator@11 { - compatible = "regulator-fixed"; - reg = <11>; - regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; - vin-supply = <&vdd_1v05_run>; - }; - - vdd_5v0_hdmi: regulator@12 { - compatible = "regulator-fixed"; - reg = <12>; - regulator-name = "+5V_HDMI_CON"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; - }; - - sound { - compatible = "nvidia,tegra-audio-max98090-nyan-big", - "nvidia,tegra-audio-max98090"; - nvidia,model = "Acer Chromebook 13"; - - nvidia,audio-routing = - "Headphones", "HPR", - "Headphones", "HPL", - "Speakers", "SPKR", - "Speakers", "SPKL", - "Mic Jack", "MICBIAS", - "DMICL", "Int Mic", - "DMICR", "Int Mic", - "IN34", "Mic Jack"; - - nvidia,i2s-controller = <&tegra_i2s1>; - nvidia,audio-codec = <&acodec>; - - clocks = <&tegra_car TEGRA124_CLK_PLL_A>, - <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA124_CLK_EXTERN1>; - clock-names = "pll_a", "pll_a_out0", "mclk"; - - nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>; - nvidia,mic-det-gpios = - <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; - }; }; - -#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi new file mode 100644 index 000000000000..9ecd108f56cf --- /dev/null +++ b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi @@ -0,0 +1,2049 @@ +/ { + clock@0,60006000 { + emc-timings-1 { + nvidia,ram-code = <1>; + + timing-12750000 { + clock-frequency = <12750000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-20400000 { + clock-frequency = <20400000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-40800000 { + clock-frequency = <40800000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-68000000 { + clock-frequency = <68000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-300000000 { + clock-frequency = <300000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C>; + clock-names = "emc-parent"; + }; + timing-396000000 { + clock-frequency = <396000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M>; + clock-names = "emc-parent"; + }; + /* TODO: Add 528MHz frequency */ + timing-600000000 { + clock-frequency = <600000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>; + clock-names = "emc-parent"; + }; + timing-792000000 { + clock-frequency = <792000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + }; + }; + + emc@0,7001b000 { + emc-timings-1 { + nvidia,ram-code = <1>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000060 + 0x00000000 + 0x00000018 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000007 + 0x0000000f + 0x00000005 + 0x00000005 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000064 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000007 + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x800001c5 + 0x0000000a + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 + 0x00000005 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x0000009a + 0x00000000 + 0x00000026 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000007 + 0x0000000f + 0x00000006 + 0x00000006 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x000000a0 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x0000000b + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x8000023a + 0x0000000a + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000001 + 0x0000000a + 0x00000000 + 0x00000001 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000134 + 0x00000000 + 0x0000004d + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000008 + 0x0000000f + 0x0000000c + 0x0000000c + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000005 + 0x00000005 + 0x0000013f + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000015 + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x80000370 + 0x0000000a + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000003 + 0x00000011 + 0x00000000 + 0x00000002 + 0x00000000 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000000 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000202 + 0x00000000 + 0x00000080 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x0000000f + 0x0000000f + 0x00000013 + 0x00000013 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000001 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000213 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000022 + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x8000050e + 0x0000000a + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000004 + 0x0000001a + 0x00000000 + 0x00000003 + 0x00000001 + 0x00000004 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000001 + 0x00000001 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x0000000c + 0x0000000d + 0x0000000f + 0x00000304 + 0x00000000 + 0x000000c1 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000018 + 0x0000000f + 0x0000001c + 0x0000001c + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000003 + 0x00000000 + 0x00000005 + 0x00000005 + 0x0000031c + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x000fc000 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x0000fc00 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000033 + 0x00000000 + 0x00000042 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000f2f3 + 0x80000713 + 0x0000000a + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x0000088d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000009 + 0x00000035 + 0x00000000 + 0x00000007 + 0x00000002 + 0x00000005 + 0x0000000a + 0x00000003 + 0x0000000b + 0x00000002 + 0x00000002 + 0x00000003 + 0x00000003 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000006 + 0x00000002 + 0x00000000 + 0x00000004 + 0x00000006 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000003 + 0x0000000d + 0x0000000f + 0x00000011 + 0x00000607 + 0x00000000 + 0x00000181 + 0x00000002 + 0x00000002 + 0x00000001 + 0x00000000 + 0x00000032 + 0x0000000f + 0x00000038 + 0x00000038 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000007 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000638 + 0x00000000 + 0x00000000 + 0x00000000 + 0x106aa298 + 0x002c00a0 + 0x00008000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00064000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x0000c000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00090000 + 0x00090000 + 0x00090000 + 0x00090000 + 0x00009000 + 0x00009000 + 0x00009000 + 0x00009000 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000505 + 0x81f1f108 + 0x07070004 + 0x0000003f + 0x016eeeee + 0x51451400 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000066 + 0x00000000 + 0x00000100 + 0x000c000c + 0x00000000 + 0x00000003 + 0x0000d2b3 + 0x80000d22 + 0x0000000a + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x000008d5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000321>; + nvidia,emc-mrs-wait-cnt = <0x0174000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000000d + 0x0000004c + 0x00000000 + 0x00000009 + 0x00000003 + 0x00000004 + 0x00000008 + 0x00000002 + 0x00000009 + 0x00000003 + 0x00000003 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000005 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000007 + 0x00020000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000001 + 0x0000000e + 0x00000010 + 0x00000012 + 0x000008e4 + 0x00000000 + 0x00000239 + 0x00000001 + 0x00000008 + 0x00000001 + 0x00000000 + 0x0000004a + 0x0000000e + 0x00000051 + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000009 + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000924 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0x002c00a0 + 0x00008000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00090000 + 0x00090000 + 0x00000000 + 0x00090000 + 0x00090000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00060000 + 0x00060000 + 0x00060000 + 0x00060000 + 0x00006000 + 0x00006000 + 0x00006000 + 0x00006000 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000202 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x00000096 + 0x00000000 + 0x00000100 + 0x0174000c + 0x00000000 + 0x00000003 + 0x000052a3 + 0x800012d7 + 0x00000009 + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x00000895>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-mrs-wait-cnt = <0x015b000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000012 + 0x00000065 + 0x00000000 + 0x0000000c + 0x00000004 + 0x00000005 + 0x00000008 + 0x00000002 + 0x0000000a + 0x00000004 + 0x00000004 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000003 + 0x00000003 + 0x00000005 + 0x00000002 + 0x00000000 + 0x00000001 + 0x00000008 + 0x00020000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000000f + 0x00000010 + 0x00000012 + 0x00000bd1 + 0x00000000 + 0x000002f4 + 0x00000001 + 0x00000008 + 0x00000001 + 0x00000000 + 0x00000063 + 0x0000000f + 0x0000006b + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x0000000d + 0x00000000 + 0x00000005 + 0x00000005 + 0x00000c11 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0x002c00a0 + 0x00008000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00030000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00068000 + 0x00068000 + 0x00000000 + 0x00068000 + 0x00068000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00058000 + 0x00058000 + 0x00058000 + 0x00058000 + 0x00005800 + 0x00005800 + 0x00005800 + 0x00005800 + 0x10000280 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc081 + 0x00000202 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0000003f + 0x000000c6 + 0x00000000 + 0x00000100 + 0x015b000c + 0x00000000 + 0x00000003 + 0x000052a3 + 0x8000188b + 0x00000009 + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200010>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000b61>; + nvidia,emc-mrs-wait-cnt = <0x0128000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0121113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000001c + 0x0000009a + 0x00000000 + 0x00000013 + 0x00000007 + 0x00000007 + 0x0000000b + 0x00000003 + 0x00000010 + 0x00000007 + 0x00000007 + 0x00000002 + 0x00000002 + 0x00000000 + 0x00000005 + 0x00000005 + 0x0000000a + 0x00000002 + 0x00000000 + 0x00000003 + 0x0000000b + 0x00070000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000002 + 0x00000012 + 0x00000016 + 0x00000018 + 0x00001208 + 0x00000000 + 0x00000482 + 0x00000002 + 0x0000000d + 0x00000001 + 0x00000000 + 0x00000096 + 0x00000015 + 0x000000a2 + 0x00000200 + 0x00000004 + 0x00000005 + 0x00000004 + 0x00000015 + 0x00000000 + 0x00000006 + 0x00000006 + 0x00001248 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0xe00e00b1 + 0x00008000 + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x0000000a + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00040000 + 0x00040000 + 0x00000000 + 0x00040000 + 0x00040000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000004 + 0x00000004 + 0x00000001 + 0x00000005 + 0x00000007 + 0x00000004 + 0x00000006 + 0x00000007 + 0x00000004 + 0x00000004 + 0x00000001 + 0x00000005 + 0x00000007 + 0x00000004 + 0x00000006 + 0x00000007 + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x100002a0 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc085 + 0x00000202 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x51451420 + 0x00514514 + 0x00514514 + 0x51451400 + 0x0606003f + 0x00000000 + 0x00000000 + 0x00000100 + 0x0128000c + 0x00000000 + 0x00000003 + 0x000040a0 + 0x800024a9 + 0x0000000e + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200018>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-mrs-wait-cnt = <0x00f8000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040000>; + nvidia,emc-xm2dqspadctrl2 = <0x0120113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000025 + 0x000000cc + 0x00000000 + 0x0000001a + 0x00000009 + 0x00000008 + 0x0000000d + 0x00000004 + 0x00000013 + 0x00000009 + 0x00000009 + 0x00000003 + 0x00000002 + 0x00000000 + 0x00000006 + 0x00000006 + 0x0000000b + 0x00000002 + 0x00000000 + 0x00000002 + 0x0000000d + 0x00080000 + 0x00000004 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000001 + 0x00000014 + 0x00000018 + 0x0000001a + 0x000017e2 + 0x00000000 + 0x000005f8 + 0x00000003 + 0x00000011 + 0x00000001 + 0x00000000 + 0x000000c6 + 0x00000018 + 0x000000d6 + 0x00000200 + 0x00000005 + 0x00000006 + 0x00000005 + 0x0000001d + 0x00000000 + 0x00000008 + 0x00000008 + 0x00001822 + 0x00000000 + 0x00000000 + 0x00000000 + 0x104ab098 + 0xe00700b1 + 0x00008000 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000008 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0002c000 + 0x0002c000 + 0x00000000 + 0x0002c000 + 0x0002c000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000008 + 0x00000008 + 0x00000005 + 0x00000008 + 0x0000000a + 0x00000008 + 0x0000000a + 0x0000000a + 0x00000008 + 0x00000008 + 0x00000005 + 0x00000008 + 0x0000000a + 0x00000008 + 0x0000000a + 0x0000000a + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x0000000e + 0x100002a0 + 0x00000000 + 0x00111111 + 0x00000000 + 0x00000000 + 0x77ffc085 + 0x00000202 + 0x81f1f108 + 0x07070004 + 0x00000000 + 0x016eeeee + 0x61861820 + 0x00492492 + 0x00492492 + 0x61861800 + 0x0606003f + 0x00000000 + 0x00000000 + 0x00000100 + 0x00f8000c + 0x00000000 + 0x00000004 + 0x00004080 + 0x80003012 + 0x0000000f + >; + }; + + }; + }; + + memory-controller@0,70019000 { + emc-timings-1 { + nvidia,ram-code = <1>; + + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emem-configuration = < + 0x40040001 + 0x8000000a + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0402 + 0x77e30303 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emem-configuration = < + 0x40020001 + 0x80000012 + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0402 + 0x76230303 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emem-configuration = < + 0xa0000001 + 0x80000017 + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0402 + 0x74a30303 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emem-configuration = < + 0x00000001 + 0x8000001e + 0x00000001 + 0x00000001 + 0x00000002 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0402 + 0x74230403 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < + 0x08000001 + 0x80000026 + 0x00000001 + 0x00000001 + 0x00000003 + 0x00000000 + 0x00000002 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000003 + 0x00000006 + 0x06030203 + 0x000a0403 + 0x73c30504 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < + 0x01000003 + 0x80000040 + 0x00000001 + 0x00000001 + 0x00000005 + 0x00000002 + 0x00000004 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000003 + 0x00000002 + 0x00000004 + 0x00000006 + 0x06040203 + 0x000a0405 + 0x73840a06 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emem-configuration = < + 0x08000004 + 0x80000040 + 0x00000001 + 0x00000002 + 0x00000007 + 0x00000004 + 0x00000005 + 0x00000001 + 0x00000002 + 0x00000007 + 0x00000002 + 0x00000002 + 0x00000004 + 0x00000006 + 0x06040202 + 0x000b0607 + 0x77450e08 + 0x70000f03 + 0x001f0000 + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emem-configuration = < + 0x0f000005 + 0x80000040 + 0x00000001 + 0x00000002 + 0x00000009 + 0x00000005 + 0x00000007 + 0x00000001 + 0x00000002 + 0x00000008 + 0x00000002 + 0x00000002 + 0x00000004 + 0x00000006 + 0x06040202 + 0x000d0709 + 0x7586120a + 0x70000f03 + 0x001f0000 + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emem-configuration = < + 0x0f000007 + 0x80000040 + 0x00000002 + 0x00000003 + 0x0000000d + 0x00000008 + 0x0000000a + 0x00000001 + 0x00000002 + 0x00000009 + 0x00000002 + 0x00000002 + 0x00000005 + 0x00000006 + 0x06050202 + 0x0010090d + 0x7428180e + 0x70000f03 + 0x001f0000 + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emem-configuration = < + 0x00000009 + 0x80000040 + 0x00000003 + 0x00000004 + 0x0000000e + 0x00000009 + 0x0000000b + 0x00000001 + 0x00000003 + 0x0000000b + 0x00000002 + 0x00000002 + 0x00000005 + 0x00000007 + 0x07050202 + 0x00130b0e + 0x73a91b0f + 0x70000f03 + 0x001f0000 + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emem-configuration = < + 0x0e00000b + 0x80000040 + 0x00000004 + 0x00000005 + 0x00000013 + 0x0000000c + 0x0000000f + 0x00000002 + 0x00000003 + 0x0000000c + 0x00000002 + 0x00000002 + 0x00000006 + 0x00000008 + 0x08060202 + 0x00160d13 + 0x734c2414 + 0x70000f02 + 0x001f0000 + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/tegra124-nyan-blaze.dts new file mode 100644 index 000000000000..0d30c514ffad --- /dev/null +++ b/arch/arm/boot/dts/tegra124-nyan-blaze.dts @@ -0,0 +1,1334 @@ +/dts-v1/; + +#include "tegra124-nyan.dtsi" + +#include "tegra124-nyan-blaze-emc.dtsi" + +/ { + model = "HP Chromebook 14"; + compatible = "google,nyan-blaze", "google,nyan", "nvidia,tegra124"; + + panel: panel { + compatible = "samsung,ltn140at29-301"; + + backlight = <&backlight>; + ddc-i2c-bus = <&dpaux>; + }; + + sound { + compatible = "nvidia,tegra-audio-max98090-nyan-blaze", + "nvidia,tegra-audio-max98090-nyan", + "nvidia,tegra-audio-max98090"; + nvidia,model = "GoogleNyanBlaze"; + }; + + pinmux@0,70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_default>; + + pinmux_default: common { + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_sclk_pa3 { + nvidia,pins = "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pb0 { + nvidia,pins = "pb0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pb1 { + nvidia,pins = "pb1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat3_pb4 { + nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat2_pb5 { + nvidia,pins = "sdmmc3_dat2_pb5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat1_pb6 { + nvidia,pins = "sdmmc3_dat1_pb6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat0_pb7 { + nvidia,pins = "sdmmc3_dat0_pb7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pc7 { + nvidia,pins = "pc7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pg0 { + nvidia,pins = "pg0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pg1 { + nvidia,pins = "pg1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pg2 { + nvidia,pins = "pg2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pg3 { + nvidia,pins = "pg3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pg4 { + nvidia,pins = "pg4"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg5 { + nvidia,pins = "pg5"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg6 { + nvidia,pins = "pg6"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg7 { + nvidia,pins = "pg7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ph0 { + nvidia,pins = "ph0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph1 { + nvidia,pins = "ph1"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph2 { + nvidia,pins = "ph2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ph3 { + nvidia,pins = "ph3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph4 { + nvidia,pins = "ph4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ph5 { + nvidia,pins = "ph5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph6 { + nvidia,pins = "ph6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ph7 { + nvidia,pins = "ph7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi0 { + nvidia,pins = "pi0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pi1 { + nvidia,pins = "pi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pi2 { + nvidia,pins = "pi2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi3 { + nvidia,pins = "pi3"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi4 { + nvidia,pins = "pi4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi5 { + nvidia,pins = "pi5"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi6 { + nvidia,pins = "pi6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pi7 { + nvidia,pins = "pi7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pj0 { + nvidia,pins = "pj0"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pj2 { + nvidia,pins = "pj2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pj7 { + nvidia,pins = "pj7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pk0 { + nvidia,pins = "pk0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk1 { + nvidia,pins = "pk1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk2 { + nvidia,pins = "pk2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pk3 { + nvidia,pins = "pk3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk4 { + nvidia,pins = "pk4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_out_pk5 { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk7 { + nvidia,pins = "pk7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_fs_pn0 { + nvidia,pins = "dap1_fs_pn0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_sclk_pn3 { + nvidia,pins = "dap1_sclk_pn3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + usb_vbus_en1_pn5 { + nvidia,pins = "usb_vbus_en1_pn5"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + ulpi_data7_po0 { + nvidia,pins = "ulpi_data7_po0"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data0_po1 { + nvidia,pins = "ulpi_data0_po1"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data1_po2 { + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data2_po3 { + nvidia,pins = "ulpi_data2_po3"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data3_po4 { + nvidia,pins = "ulpi_data3_po4"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data4_po5 { + nvidia,pins = "ulpi_data4_po5"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data5_po6 { + nvidia,pins = "ulpi_data5_po6"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data6_po7 { + nvidia,pins = "ulpi_data6_po7"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_din_pp1 { + nvidia,pins = "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_dout_pp2 { + nvidia,pins = "dap3_dout_pp2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_sclk_pp3 { + nvidia,pins = "dap3_sclk_pp3"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_fs_pp4 { + nvidia,pins = "dap4_fs_pp4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_dout_pp6 { + nvidia,pins = "dap4_dout_pp6"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_sclk_pp7 { + nvidia,pins = "dap4_sclk_pp7"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col1_pq1 { + nvidia,pins = "kb_col1_pq1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col2_pq2 { + nvidia,pins = "kb_col2_pq2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col3_pq3 { + nvidia,pins = "kb_col3_pq3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col6_pq6 { + nvidia,pins = "kb_col6_pq6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col7_pq7 { + nvidia,pins = "kb_col7_pq7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row0_pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row1_pr1 { + nvidia,pins = "kb_row1_pr1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row2_pr2 { + nvidia,pins = "kb_row2_pr2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row4_pr4 { + nvidia,pins = "kb_row4_pr4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row5_pr5 { + nvidia,pins = "kb_row5_pr5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row6_pr6 { + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row8_ps0 { + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row11_ps3 { + nvidia,pins = "kb_row11_ps3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row12_ps4 { + nvidia,pins = "kb_row12_ps4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row13_ps5 { + nvidia,pins = "kb_row13_ps5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row14_ps6 { + nvidia,pins = "kb_row14_ps6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row15_ps7 { + nvidia,pins = "kb_row15_ps7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row16_pt0 { + nvidia,pins = "kb_row16_pt0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row17_pt1 { + nvidia,pins = "kb_row17_pt1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_sda_pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu0 { + nvidia,pins = "pu0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu1 { + nvidia,pins = "pu1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu2 { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu4 { + nvidia,pins = "pu4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu5 { + nvidia,pins = "pu5"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu6 { + nvidia,pins = "pu6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv0 { + nvidia,pins = "pv0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cd_n_pv2 { + nvidia,pins = "sdmmc3_cd_n_pv2"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_wp_n_pv3 { + nvidia,pins = "sdmmc1_wp_n_pv3"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + ddc_sda_pv5 { + nvidia,pins = "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + gpio_w2_aud_pw2 { + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_w3_aud_pw3 { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap_mclk1_pw4 { + nvidia,pins = "dap_mclk1_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_txd_pw6 { + nvidia,pins = "uart3_txd_pw6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_rxd_pw7 { + nvidia,pins = "uart3_rxd_pw7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x1_aud_px1 { + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dvfs_clk_px2 { + nvidia,pins = "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x3_aud_px3 { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x4_aud_px4 { + nvidia,pins = "gpio_x4_aud_px4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x5_aud_px5 { + nvidia,pins = "gpio_x5_aud_px5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x6_aud_px6 { + nvidia,pins = "gpio_x6_aud_px6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x7_aud_px7 { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_nxt_py2 { + nvidia,pins = "ulpi_nxt_py2"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat3_py4 { + nvidia,pins = "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat2_py5 { + nvidia,pins = "sdmmc1_dat2_py5"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat1_py6 { + nvidia,pins = "sdmmc1_dat1_py6"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat0_py7 { + nvidia,pins = "sdmmc1_dat0_py7"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pwr_i2c_sda_pz7 { + nvidia,pins = "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat1_paa1 { + nvidia,pins = "sdmmc4_dat1_paa1"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat2_paa2 { + nvidia,pins = "sdmmc4_dat2_paa2"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat3_paa3 { + nvidia,pins = "sdmmc4_dat3_paa3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat4_paa4 { + nvidia,pins = "sdmmc4_dat4_paa4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat5_paa5 { + nvidia,pins = "sdmmc4_dat5_paa5"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat6_paa6 { + nvidia,pins = "sdmmc4_dat6_paa6"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat7_paa7 { + nvidia,pins = "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pbb0 { + nvidia,pins = "pbb0"; + nvidia,function = "vgp6"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_sda_pbb2 { + nvidia,pins = "cam_i2c_sda_pbb2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pbb3 { + nvidia,pins = "pbb3"; + nvidia,function = "vgp3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb6 { + nvidia,pins = "pbb6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb7 { + nvidia,pins = "pbb7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc1 { + nvidia,pins = "pcc1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc2 { + nvidia,pins = "pcc2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l0_rst_n_pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l0_clkreq_n_pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_wake_n_pdd3 { + nvidia,pins = "pex_wake_n_pdd3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l1_rst_n_pdd5 { + nvidia,pins = "pex_l1_rst_n_pdd5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l1_clkreq_n_pdd6 { + nvidia,pins = "pex_l1_clkreq_n_pdd6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap_mclk1_req_pee2 { + nvidia,pins = "dap_mclk1_req_pee2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_lb_out_pee4 { + nvidia,pins = "sdmmc3_clk_lb_out_pee4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_clk_lb_in_pee5 { + nvidia,pins = "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dp_hpd_pff0 { + nvidia,pins = "dp_hpd_pff0"; + nvidia,function = "dp"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en2_pff1 { + nvidia,pins = "usb_vbus_en2_pff1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pff2 { + nvidia,pins = "pff2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "rtck"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi new file mode 100644 index 000000000000..a9aec23e06f2 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -0,0 +1,695 @@ +#include <dt-bindings/input/input.h> +#include "tegra124.dtsi" + +/ { + aliases { + rtc0 = "/i2c@0,7000d000/pmic@40"; + rtc1 = "/rtc@0,7000e000"; + serial0 = &uarta; + }; + + memory { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + host1x@0,50000000 { + hdmi@0,54280000 { + status = "okay"; + + vdd-supply = <&vdd_3v3_hdmi>; + pll-supply = <&vdd_hdmi_pll>; + hdmi-supply = <&vdd_5v0_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + + sor@0,54540000 { + status = "okay"; + + nvidia,dpaux = <&dpaux>; + nvidia,panel = <&panel>; + }; + + dpaux@0,545c0000 { + vdd-supply = <&vdd_3v3_panel>; + status = "okay"; + }; + }; + + serial@0,70006000 { + /* Debug connector on the bottom of the board near SD card. */ + status = "okay"; + }; + + pwm@0,7000a000 { + status = "okay"; + }; + + i2c@0,7000c000 { + status = "okay"; + clock-frequency = <100000>; + + acodec: audio-codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + }; + + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + + #thermal-sensor-cells = <1>; + }; + }; + + i2c@0,7000c400 { + status = "okay"; + clock-frequency = <100000>; + + trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + }; + + i2c@0,7000c500 { + status = "okay"; + clock-frequency = <400000>; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + }; + }; + + hdmi_ddc: i2c@0,7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: pmic@40 { + compatible = "ams,as3722"; + reg = <0x40>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + + ams,system-power-controller; + + #interrupt-cells = <2>; + interrupt-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&as3722_default>; + + as3722_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + bias-pull-down; + }; + + gpio1 { + pins = "gpio1"; + function = "gpio"; + bias-pull-up; + }; + + gpio2_4_7 { + pins = "gpio2", "gpio4", "gpio7"; + function = "gpio"; + bias-pull-up; + }; + + gpio3_6 { + pins = "gpio3", "gpio6"; + bias-high-impedance; + }; + + gpio5 { + pins = "gpio5"; + function = "clk32k-out"; + bias-pull-down; + }; + }; + + regulators { + vsup-sd2-supply = <&vdd_5v0_sys>; + vsup-sd3-supply = <&vdd_5v0_sys>; + vsup-sd4-supply = <&vdd_5v0_sys>; + vsup-sd5-supply = <&vdd_5v0_sys>; + vin-ldo0-supply = <&vdd_1v35_lp0>; + vin-ldo1-6-supply = <&vdd_3v3_run>; + vin-ldo2-5-7-supply = <&vddio_1v8>; + vin-ldo3-4-supply = <&vdd_3v3_sys>; + vin-ldo9-10-supply = <&vdd_5v0_sys>; + vin-ldo11-supply = <&vdd_3v3_run>; + + sd0 { + regulator-name = "+VDD_CPU_AP"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <2>; + }; + + sd1 { + regulator-name = "+VDD_CORE"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <2500000>; + regulator-max-microamp = <4000000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <1>; + }; + + vdd_1v35_lp0: sd2 { + regulator-name = "+1.35V_LP0(sd2)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + sd3 { + regulator-name = "+1.35V_LP0(sd3)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v05_run: sd4 { + regulator-name = "+1.05V_RUN"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + vddio_1v8: sd5 { + regulator-name = "+1.8V_VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sd6 { + regulator-name = "+VDD_GPU_AP"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo0 { + regulator-name = "+1.05V_RUN_AVDD"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + ams,ext-control = <1>; + }; + + ldo1 { + regulator-name = "+1.8V_RUN_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2 { + regulator-name = "+1.2V_GEN_AVDD"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3 { + regulator-name = "+1.00V_LP0_VDD_RTC"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + ams,enable-tracking; + }; + + vdd_run_cam: ldo4 { + regulator-name = "+3.3V_RUN_CAM"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo5 { + regulator-name = "+1.2V_RUN_CAM_FRONT"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vddio_sdmmc3: ldo6 { + regulator-name = "+VDDIO_SDMMC3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-name = "+1.05V_RUN_CAM_REAR"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo9 { + regulator-name = "+2.8V_RUN_TOUCH"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10 { + regulator-name = "+2.8V_RUN_CAM_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo11 { + regulator-name = "+1.8V_RUN_VPP_FUSE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; + + spi@0,7000d400 { + status = "okay"; + + cros_ec: cros-ec@0 { + compatible = "google,cros-ec-spi"; + spi-max-frequency = <3000000>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>; + reg = <0>; + + google,cros-ec-spi-msg-delay = <2000>; + + i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + #address-cells = <1>; + #size-cells = <0>; + + google,remote-bus = <0>; + + charger: bq24735@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(J, 0) + GPIO_ACTIVE_HIGH>; + ti,ac-detect-gpios = <&gpio + TEGRA_GPIO(J, 0) + GPIO_ACTIVE_HIGH>; + }; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <10>; + power-supplies = <&charger>; + }; + }; + }; + }; + + spi@0,7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + + flash@0 { + compatible = "winbond,w25q32dw"; + spi-max-frequency = <25000000>; + reg = <0>; + }; + }; + + pmc@0,7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <500>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <61036>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + hda@0,70030000 { + status = "okay"; + }; + + sdhci0_pwrseq: sdhci0_pwrseq { + compatible = "mmc-pwrseq-simple"; + + reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; + }; + + sdhci@0,700b0000 { /* WiFi/BT on this bus */ + status = "okay"; + bus-width = <4>; + no-1-8-v; + non-removable; + mmc-pwrseq = <&sdhci0_pwrseq>; + vmmc-supply = <&vdd_3v3_lp0>; + vqmmc-supply = <&vddio_1v8>; + keep-power-in-suspend; + }; + + sdhci@0,700b0400 { /* SD Card on this bus */ + status = "okay"; + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + no-1-8-v; + vqmmc-supply = <&vddio_sdmmc3>; + }; + + sdhci@0,700b0600 { /* eMMC on this bus */ + status = "okay"; + bus-width = <8>; + no-1-8-v; + non-removable; + }; + + ahub@0,70300000 { + i2s@0,70301100 { + status = "okay"; + }; + }; + + usb@0,7d000000 { /* Rear external USB port. */ + status = "okay"; + }; + + usb-phy@0,7d000000 { + status = "okay"; + vbus-supply = <&vdd_usb1_vbus>; + }; + + usb@0,7d004000 { /* Internal webcam. */ + status = "okay"; + }; + + usb-phy@0,7d004000 { + status = "okay"; + vbus-supply = <&vdd_run_cam>; + }; + + usb@0,7d008000 { /* Left external USB port. */ + status = "okay"; + }; + + usb-phy@0,7d008000 { + status = "okay"; + vbus-supply = <&vdd_usb3_vbus>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_led>; + pwms = <&pwm 1 1000000>; + + default-brightness-level = <224>; + brightness-levels = + < 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255 + 256>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + lid { + label = "Lid"; + gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>; + linux,input-type = <5>; + linux,code = <KEY_RESERVED>; + debounce-interval = <1>; + gpio-key,wakeup; + }; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <30>; + gpio-key,wakeup; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_mux: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "+VDD_MUX"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "+5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "+3.3V_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_run: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "+3.3V_RUN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_3v3_hdmi: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_run>; + }; + + vdd_led: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "+VDD_LED"; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_mux>; + }; + + vdd_5v0_ts: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "+5V_VDD_TS_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb1_vbus: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "+5V_USB_HS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb3_vbus: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "+5V_USB_SS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_3v3_panel: regulator@9 { + compatible = "regulator-fixed"; + reg = <9>; + regulator-name = "+3.3V_PANEL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pmic 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_run>; + }; + + vdd_3v3_lp0: regulator@10 { + compatible = "regulator-fixed"; + reg = <10>; + regulator-name = "+3.3V_LP0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* + * TODO: find a way to wire this up with the USB EHCI + * controllers so that it can be enabled on demand. + */ + regulator-always-on; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_hdmi_pll: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; + + vdd_5v0_hdmi: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + }; + + sound { + nvidia,audio-routing = + "Headphones", "HPR", + "Headphones", "HPL", + "Speakers", "SPKR", + "Speakers", "SPKL", + "Mic Jack", "MICBIAS", + "DMICL", "Int Mic", + "DMICR", "Int Mic", + "IN34", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&acodec>; + + clocks = <&tegra_car TEGRA124_CLK_PLL_A>, + <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>; + nvidia,mic-det-gpios = + <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 4be06c6ea0c8..cf01c818b8ea 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -10,7 +10,7 @@ / { compatible = "nvidia,tegra124"; - interrupt-parent = <&gic>; + interrupt-parent = <&lic>; #address-cells = <2>; #size-cells = <2>; @@ -173,6 +173,7 @@ <0x0 0x50046000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; }; gpu@0,57000000 { @@ -190,6 +191,18 @@ status = "disabled"; }; + lic: interrupt-controller@60004000 { + compatible = "nvidia,tegra124-ictlr", "nvidia,tegra30-ictlr"; + reg = <0x0 0x60004000 0x0 0x100>, + <0x0 0x60004100 0x0 0x100>, + <0x0 0x60004200 0x0 0x100>, + <0x0 0x60004300 0x0 0x100>, + <0x0 0x60004400 0x0 0x100>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + }; + timer@0,60005000 { compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer"; reg = <0x0 0x60005000 0x0 0x400>; @@ -207,6 +220,7 @@ reg = <0x0 0x60006000 0x0 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + nvidia,external-memory-controller = <&emc>; }; flow-controller@0,60007000 { @@ -214,6 +228,17 @@ reg = <0x0 0x60007000 0x0 0x1000>; }; + actmon@0,6000c800 { + compatible = "nvidia,tegra124-actmon"; + reg = <0x0 0x6000c800 0x0 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_ACTMON>, + <&tegra_car TEGRA124_CLK_EMC>; + clock-names = "actmon", "emc"; + resets = <&tegra_car 119>; + reset-names = "actmon"; + }; + gpio: gpio@0,6000d000 { compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio"; reg = <0x0 0x6000d000 0x0 0x1000>; @@ -569,6 +594,13 @@ #iommu-cells = <1>; }; + emc: emc@0,7001b000 { + compatible = "nvidia,tegra124-emc"; + reg = <0x0 0x7001b000 0x0 0x1000>; + + nvidia,memory-controller = <&mc>; + }; + sata@0,70020000 { compatible = "nvidia,tegra124-ahci"; @@ -955,5 +987,6 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index e5527f742696..adf6b048d0bb 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -7,7 +7,7 @@ / { compatible = "nvidia,tegra20"; - interrupt-parent = <&intc>; + interrupt-parent = <&lic>; host1x@50000000 { compatible = "nvidia,tegra20-host1x", "simple-bus"; @@ -142,6 +142,7 @@ timer@50040600 { compatible = "arm,cortex-a9-twd-timer"; + interrupt-parent = <&intc>; reg = <0x50040600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; @@ -154,6 +155,7 @@ 0x50040100 0x0100>; interrupt-controller; #interrupt-cells = <3>; + interrupt-parent = <&intc>; }; cache-controller@50043000 { @@ -165,6 +167,17 @@ cache-level = <2>; }; + lic: interrupt-controller@60004000 { + compatible = "nvidia,tegra20-ictlr"; + reg = <0x60004000 0x100>, + <0x60004100 0x50>, + <0x60004200 0x50>, + <0x60004300 0x50>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&intc>; + }; + timer@60005000 { compatible = "nvidia,tegra20-timer"; reg = <0x60005000 0x60>; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 6b157eeabcc5..3dede3934446 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -62,71 +62,1652 @@ pinctrl-0 = <&state_default>; state_default: pinmux { - sdmmc1_clk_pz0 { - nvidia,pins = "sdmmc1_clk_pz0"; - nvidia,function = "sdmmc1"; + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "blink"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - sdmmc1_cmd_pz1 { - nvidia,pins = "sdmmc1_cmd_pz1", - "sdmmc1_dat0_py7", - "sdmmc1_dat1_py6", - "sdmmc1_dat2_py5", - "sdmmc1_dat3_py4"; - nvidia,function = "sdmmc1"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_sclk_pa3 { + nvidia,pins = "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc3_clk_pa6 { nvidia,pins = "sdmmc3_clk_pa6"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc3_cmd_pa7 { - nvidia,pins = "sdmmc3_cmd_pa7", - "sdmmc3_dat0_pb7", - "sdmmc3_dat1_pb6", - "sdmmc3_dat2_pb5", - "sdmmc3_dat3_pb4"; + nvidia,pins = "sdmmc3_cmd_pa7"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - "sdmmc4_rst_n_pcc3"; + gmi_a17_pb0 { + nvidia,pins = "gmi_a17_pb0"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_a18_pb1 { + nvidia,pins = "gmi_a18_pb1"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_pwr0_pb2 { + nvidia,pins = "lcd_pwr0_pb2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_pclk_pb3 { + nvidia,pins = "lcd_pclk_pb3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat3_pb4 { + nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat2_pb5 { + nvidia,pins = "sdmmc3_dat2_pb5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat1_pb6 { + nvidia,pins = "sdmmc3_dat1_pb6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat0_pb7 { + nvidia,pins = "sdmmc3_dat0_pb7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_pwr1_pc1 { + nvidia,pins = "lcd_pwr1_pc1"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + lcd_pwr2_pc6 { + nvidia,pins = "lcd_pwr2_pc6"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_wp_n_pc7 { + nvidia,pins = "gmi_wp_n_pc7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat5_pd0 { + nvidia,pins = "sdmmc3_dat5_pd0"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat4_pd1 { + nvidia,pins = "sdmmc3_dat4_pd1"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_dc1_pd2 { + nvidia,pins = "lcd_dc1_pd2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat6_pd3 { + nvidia,pins = "sdmmc3_dat6_pd3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat7_pd4 { + nvidia,pins = "sdmmc3_dat7_pd4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_d1_pd5 { + nvidia,pins = "vi_d1_pd5"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_vsync_pd6 { + nvidia,pins = "vi_vsync_pd6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_hsync_pd7 { + nvidia,pins = "vi_hsync_pd7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d0_pe0 { + nvidia,pins = "lcd_d0_pe0"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d1_pe1 { + nvidia,pins = "lcd_d1_pe1"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d2_pe2 { + nvidia,pins = "lcd_d2_pe2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d3_pe3 { + nvidia,pins = "lcd_d3_pe3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d4_pe4 { + nvidia,pins = "lcd_d4_pe4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d5_pe5 { + nvidia,pins = "lcd_d5_pe5"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d6_pe6 { + nvidia,pins = "lcd_d6_pe6"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d7_pe7 { + nvidia,pins = "lcd_d7_pe7"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d8_pf0 { + nvidia,pins = "lcd_d8_pf0"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d9_pf1 { + nvidia,pins = "lcd_d9_pf1"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d10_pf2 { + nvidia,pins = "lcd_d10_pf2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d11_pf3 { + nvidia,pins = "lcd_d11_pf3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d12_pf4 { + nvidia,pins = "lcd_d12_pf4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d13_pf5 { + nvidia,pins = "lcd_d13_pf5"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d14_pf6 { + nvidia,pins = "lcd_d14_pf6"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d15_pf7 { + nvidia,pins = "lcd_d15_pf7"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad0_pg0 { + nvidia,pins = "gmi_ad0_pg0"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad1_pg1 { + nvidia,pins = "gmi_ad1_pg1"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad2_pg2 { + nvidia,pins = "gmi_ad2_pg2"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad3_pg3 { + nvidia,pins = "gmi_ad3_pg3"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad4_pg4 { + nvidia,pins = "gmi_ad4_pg4"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad5_pg5 { + nvidia,pins = "gmi_ad5_pg5"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad6_pg6 { + nvidia,pins = "gmi_ad6_pg6"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad7_pg7 { + nvidia,pins = "gmi_ad7_pg7"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad8_ph0 { + nvidia,pins = "gmi_ad8_ph0"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad9_ph1 { + nvidia,pins = "gmi_ad9_ph1"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad10_ph2 { + nvidia,pins = "gmi_ad10_ph2"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad11_ph3 { + nvidia,pins = "gmi_ad11_ph3"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad12_ph4 { + nvidia,pins = "gmi_ad12_ph4"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad13_ph5 { + nvidia,pins = "gmi_ad13_ph5"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad14_ph6 { + nvidia,pins = "gmi_ad14_ph6"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_wr_n_pi0 { + nvidia,pins = "gmi_wr_n_pi0"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_oe_n_pi1 { + nvidia,pins = "gmi_oe_n_pi1"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_dqs_pi2 { + nvidia,pins = "gmi_dqs_pi2"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_iordy_pi5 { + nvidia,pins = "gmi_iordy_pi5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_cs7_n_pi6 { + nvidia,pins = "gmi_cs7_n_pi6"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_wait_pi7 { + nvidia,pins = "gmi_wait_pi7"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_de_pj1 { + nvidia,pins = "lcd_de_pj1"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_hsync_pj3 { + nvidia,pins = "lcd_hsync_pj3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_vsync_pj4 { + nvidia,pins = "lcd_vsync_pj4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_a16_pj7 { + nvidia,pins = "gmi_a16_pj7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_adv_n_pk0 { + nvidia,pins = "gmi_adv_n_pk0"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_clk_pk1 { + nvidia,pins = "gmi_clk_pk1"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_cs2_n_pk3 { + nvidia,pins = "gmi_cs2_n_pk3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_cs3_n_pk4 { + nvidia,pins = "gmi_cs3_n_pk4"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_out_pk5 { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_a19_pk7 { + nvidia,pins = "gmi_a19_pk7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_d2_pl0 { + nvidia,pins = "vi_d2_pl0"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_d3_pl1 { + nvidia,pins = "vi_d3_pl1"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_d4_pl2 { + nvidia,pins = "vi_d4_pl2"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d5_pl3 { + nvidia,pins = "vi_d5_pl3"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_d6_pl4 { + nvidia,pins = "vi_d6_pl4"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d7_pl5 { + nvidia,pins = "vi_d7_pl5"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_d8_pl6 { + nvidia,pins = "vi_d8_pl6"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_d9_pl7 { + nvidia,pins = "vi_d9_pl7"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d16_pm0 { + nvidia,pins = "lcd_d16_pm0"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d17_pm1 { + nvidia,pins = "lcd_d17_pm1"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d18_pm2 { + nvidia,pins = "lcd_d18_pm2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d19_pm3 { + nvidia,pins = "lcd_d19_pm3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d20_pm4 { + nvidia,pins = "lcd_d20_pm4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d21_pm5 { + nvidia,pins = "lcd_d21_pm5"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d22_pm6 { + nvidia,pins = "lcd_d22_pm6"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_d23_pm7 { + nvidia,pins = "lcd_d23_pm7"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_fs_pn0 { + nvidia,pins = "dap1_fs_pn0"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_sclk_pn3 { + nvidia,pins = "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_cs0_n_pn4 { + nvidia,pins = "lcd_cs0_n_pn4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_sdout_pn5 { + nvidia,pins = "lcd_sdout_pn5"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_dc0_pn6 { + nvidia,pins = "lcd_dc0_pn6"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data7_po0 { + nvidia,pins = "ulpi_data7_po0"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data0_po1 { + nvidia,pins = "ulpi_data0_po1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data1_po2 { + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data2_po3 { + nvidia,pins = "ulpi_data2_po3"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data3_po4 { + nvidia,pins = "ulpi_data3_po4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data4_po5 { + nvidia,pins = "ulpi_data4_po5"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data5_po6 { + nvidia,pins = "ulpi_data5_po6"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data6_po7 { + nvidia,pins = "ulpi_data6_po7"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_din_pp1 { + nvidia,pins = "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_dout_pp2 { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_sclk_pp3 { + nvidia,pins = "dap3_sclk_pp3"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_fs_pp4 { + nvidia,pins = "dap4_fs_pp4"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_dout_pp6 { + nvidia,pins = "dap4_dout_pp6"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_sclk_pp7 { + nvidia,pins = "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col1_pq1 { + nvidia,pins = "kb_col1_pq1"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col2_pq2 { + nvidia,pins = "kb_col2_pq2"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col3_pq3 { + nvidia,pins = "kb_col3_pq3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col6_pq6 { + nvidia,pins = "kb_col6_pq6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col7_pq7 { + nvidia,pins = "kb_col7_pq7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row0_pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row1_pr1 { + nvidia,pins = "kb_row1_pr1"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row2_pr2 { + nvidia,pins = "kb_row2_pr2"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row4_pr4 { + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row5_pr5 { + nvidia,pins = "kb_row5_pr5"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row6_pr6 { + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row8_ps0 { + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row11_ps3 { + nvidia,pins = "kb_row11_ps3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row12_ps4 { + nvidia,pins = "kb_row12_ps4"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row13_ps5 { + nvidia,pins = "kb_row13_ps5"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row14_ps6 { + nvidia,pins = "kb_row14_ps6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row15_ps7 { + nvidia,pins = "kb_row15_ps7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_pclk_pt0 { + nvidia,pins = "vi_pclk_pt0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_mclk_pt1 { + nvidia,pins = "vi_mclk_pt1"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_d10_pt2 { + nvidia,pins = "vi_d10_pt2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_d11_pt3 { + nvidia,pins = "vi_d11_pt3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_d0_pt4 { + nvidia,pins = "vi_d0_pt4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_sda_pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7"; nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu0 { + nvidia,pins = "pu0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu1 { + nvidia,pins = "pu1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu2 { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu5 { + nvidia,pins = "pu5"; + nvidia,function = "pwm2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu6 { + nvidia,pins = "pu6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + jtag_rtck_pu7 { + nvidia,pins = "jtag_rtck_pu7"; + nvidia,function = "rtck"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv2 { + nvidia,pins = "pv2"; + nvidia,function = "owr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pv3 { + nvidia,pins = "pv3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ddc_sda_pv5 { + nvidia,pins = "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + crt_hsync_pv6 { + nvidia,pins = "crt_hsync_pv6"; + nvidia,function = "crt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + crt_vsync_pv7 { + nvidia,pins = "crt_vsync_pv7"; + nvidia,function = "crt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd_cs1_n_pw0 { + nvidia,pins = "lcd_cs1_n_pw0"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_m1_pw1 { + nvidia,pins = "lcd_m1_pw1"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + spi2_cs1_n_pw2 { + nvidia,pins = "spi2_cs1_n_pw2"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk1_out_pw4 { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_txd_pw6 { + nvidia,pins = "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_rxd_pw7 { + nvidia,pins = "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + spi2_sck_px2 { + nvidia,pins = "spi2_sck_px2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + spi1_mosi_px4 { + nvidia,pins = "spi1_mosi_px4"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + spi1_sck_px5 { + nvidia,pins = "spi1_sck_px5"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + spi1_cs0_n_px6 { + nvidia,pins = "spi1_cs0_n_px6"; + nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + spi1_miso_px7 { + nvidia,pins = "spi1_miso_px7"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_nxt_py2 { + nvidia,pins = "ulpi_nxt_py2"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat3_py4 { + nvidia,pins = "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat2_py5 { + nvidia,pins = "sdmmc1_dat2_py5"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat1_py6 { + nvidia,pins = "sdmmc1_dat1_py6"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat0_py7 { + nvidia,pins = "sdmmc1_dat0_py7"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_sdin_pz2 { + nvidia,pins = "lcd_sdin_pz2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_wr_n_pz3 { + nvidia,pins = "lcd_wr_n_pz3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_sck_pz4 { + nvidia,pins = "lcd_sck_pz4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sys_clk_req_pz5 { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "sysclk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pwr_i2c_sda_pz7 { + nvidia,pins = "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; + nvidia,pins = "sdmmc4_dat0_paa0"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dap2_fs_pa2 { - nvidia,pins = "dap2_fs_pa2", - "dap2_sclk_pa3", - "dap2_din_pa4", - "dap2_dout_pa5"; - nvidia,function = "i2s1"; + sdmmc4_dat1_paa1 { + nvidia,pins = "sdmmc4_dat1_paa1"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat2_paa2 { + nvidia,pins = "sdmmc4_dat2_paa2"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat3_paa3 { + nvidia,pins = "sdmmc4_dat3_paa3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat4_paa4 { + nvidia,pins = "sdmmc4_dat4_paa4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat5_paa5 { + nvidia,pins = "sdmmc4_dat5_paa5"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat6_paa6 { + nvidia,pins = "sdmmc4_dat6_paa6"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat7_paa7 { + nvidia,pins = "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pbb0 { + nvidia,pins = "pbb0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + cam_i2c_sda_pbb2 { + nvidia,pins = "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pbb3 { + nvidia,pins = "pbb3"; + nvidia,function = "vgp3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "vgp5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pbb6 { + nvidia,pins = "pbb6"; + nvidia,function = "vgp6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pbb7 { + nvidia,pins = "pbb7"; + nvidia,function = "i2s4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pcc1 { + nvidia,pins = "pcc1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pcc2 { + nvidia,pins = "pcc2"; + nvidia,function = "i2s4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_rst_n_pcc3 { + nvidia,pins = "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "dap"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l2_rst_n_pcc6 { + nvidia,pins = "pex_l2_rst_n_pcc6"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l2_clkreq_n_pcc7 { + nvidia,pins = "pex_l2_clkreq_n_pcc7"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l0_prsnt_n_pdd0 { + nvidia,pins = "pex_l0_prsnt_n_pdd0"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l0_rst_n_pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l0_clkreq_n_pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_wake_n_pdd3 { + nvidia,pins = "pex_wake_n_pdd3"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pex_l1_prsnt_n_pdd4 { - nvidia,pins = "pex_l1_prsnt_n_pdd4", - "pex_l1_clkreq_n_pdd6"; + nvidia,pins = "pex_l1_prsnt_n_pdd4"; + nvidia,function = "pcie"; nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l1_rst_n_pdd5 { + nvidia,pins = "pex_l1_rst_n_pdd5"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l1_clkreq_n_pdd6 { + nvidia,pins = "pex_l1_clkreq_n_pdd6"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l2_prsnt_n_pdd7 { + nvidia,pins = "pex_l2_prsnt_n_pdd7"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "dev3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk1_req_pee2 { + nvidia,pins = "clk1_req_pee2"; + nvidia,function = "dap"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "owr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdio3 { nvidia,pins = "drive_sdio3"; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index db4810df142c..60e205a0f63d 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -8,7 +8,7 @@ / { compatible = "nvidia,tegra30"; - interrupt-parent = <&intc>; + interrupt-parent = <&lic>; pcie-controller@00003000 { compatible = "nvidia,tegra30-pcie"; @@ -228,6 +228,7 @@ timer@50040600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; + interrupt-parent = <&intc>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&tegra_car TEGRA30_CLK_TWD>; @@ -239,6 +240,7 @@ 0x50040100 0x0100>; interrupt-controller; #interrupt-cells = <3>; + interrupt-parent = <&intc>; }; cache-controller@50043000 { @@ -250,6 +252,18 @@ cache-level = <2>; }; + lic: interrupt-controller@60004000 { + compatible = "nvidia,tegra30-ictlr"; + reg = <0x60004000 0x100>, + <0x60004100 0x50>, + <0x60004200 0x50>, + <0x60004300 0x50>, + <0x60004400 0x50>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&intc>; + }; + timer@60005000 { compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer"; reg = <0x60005000 0x400>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 33920df03640..7a2aeacd62c0 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -362,7 +362,6 @@ compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0 0x20010000 0 0x1000>; - coresight-default-sink; clocks = <&oscclk6a>; clock-names = "apb_pclk"; port { diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index 36cafbfa1bfa..606753eb72c8 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -12,6 +12,12 @@ bootargs = "console=ttyLP0,115200"; }; + clk16m: clk16m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -47,6 +53,21 @@ status = "okay"; }; +&dspi1 { + status = "okay"; + + mcp2515can: can@0 { + compatible = "microchip,mcp2515"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_int>; + reg = <0>; + clocks = <&clk16m>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio1>; + interrupts = <11 GPIO_ACTIVE_LOW>; + }; +}; + &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; @@ -94,3 +115,13 @@ &usbh1 { vbus-supply = <&usbh_vbus_reg>; }; + +&iomuxc { + vf610-colibri { + pinctrl_can_int: can_int { + fsl,pins = < + VF610_PAD_PTB21__GPIO_43 0x22ed + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index 5c2b7320856d..fbef0828e930 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -23,6 +23,12 @@ status = "okay"; }; +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; +}; + &edma0 { status = "okay"; }; @@ -107,6 +113,15 @@ >; }; + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x33e2 + VF610_PAD_PTD6__DSPI1_SIN 0x33e1 + VF610_PAD_PTD7__DSPI1_SOUT 0x33e2 + VF610_PAD_PTD8__DSPI1_SCK 0x33e2 + >; + }; + pinctrl_esdhc1: esdhc1grp { fsl,pins = < VF610_PAD_PTA24__ESDHC1_CLK 0x31ef diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index 1dbf8d2d1ddf..e976d2fa1527 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -24,14 +24,13 @@ }; soc { - interrupt-parent = <&intc>; - aips-bus@40000000 { intc: interrupt-controller@40002000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; + interrupt-parent = <&intc>; reg = <0x40003000 0x1000>, <0x40002100 0x100>; }; @@ -40,145 +39,17 @@ compatible = "arm,cortex-a9-global-timer"; reg = <0x40002200 0x20>; interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; clocks = <&clks VF610_CLK_PLATFORM_BUS>; }; }; }; }; -&adc0 { - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; -}; - -&adc1 { - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; -}; - -&can0 { - interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; -}; - -&can1 { - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; -}; - -&dspi0 { - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; -}; - -&edma0 { - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma-tx", "edma-err"; -}; - -&edma1 { - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma-tx", "edma-err"; -}; - -&esdhc1 { - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; -}; - -&fec0 { - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; -}; - -&fec1 { - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; -}; - -&ftm { - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; -}; - -&gpio0 { - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; -}; - -&gpio1 { - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; -}; - -&gpio2 { - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; -}; - -&gpio3 { - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; -}; - -&gpio4 { - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; -}; - -&i2c0 { - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; -}; - -&pit { - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; -}; - -&qspi0 { - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; -}; - -&sai2 { - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; -}; - -&snvsrtc { - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; -}; - -&src { - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; -}; - -&uart0 { - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; -}; - -&uart1 { - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; -}; - -&uart2 { - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; -}; - -&uart3 { - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; -}; - -&uart4 { - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; -}; - -&uart5 { - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; -}; - -&usbdev0 { - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; -}; - -&usbh1 { - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; -}; - -&usbphy0 { - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; -}; - -&usbphy1 { - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; +&mscm_ir { + interrupt-parent = <&intc>; }; &wdoga5 { - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index a29c7ce15eaf..4aa335166be7 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -54,6 +54,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; + interrupt-parent = <&mscm_ir>; ranges; aips0: aips-bus@40000000 { @@ -62,6 +63,19 @@ #size-cells = <1>; ranges; + mscm_cpucfg: cpucfg@40001000 { + compatible = "fsl,vf610-mscm-cpucfg", "syscon"; + reg = <0x40001000 0x800>; + }; + + mscm_ir: interrupt-controller@40001800 { + compatible = "fsl,vf610-mscm-ir"; + reg = <0x40001800 0x400>; + fsl,cpucfg = <&mscm_cpucfg>; + interrupt-controller; + #interrupt-cells = <2>; + }; + edma0: dma-controller@40018000 { #dma-cells = <2>; compatible = "fsl,vf610-edma"; @@ -69,6 +83,9 @@ <0x40024000 0x1000>, <0x40025000 0x1000>; dma-channels = <32>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>, + <9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma-tx", "edma-err"; clock-names = "dmamux0", "dmamux1"; clocks = <&clks VF610_CLK_DMAMUX0>, <&clks VF610_CLK_DMAMUX1>; @@ -78,6 +95,7 @@ can0: flexcan@40020000 { compatible = "fsl,vf610-flexcan"; reg = <0x40020000 0x4000>; + interrupts = <58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_FLEXCAN0>, <&clks VF610_CLK_FLEXCAN0>; clock-names = "ipg", "per"; @@ -87,6 +105,7 @@ uart0: serial@40027000 { compatible = "fsl,vf610-lpuart"; reg = <0x40027000 0x1000>; + interrupts = <61 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART0>; clock-names = "ipg"; dmas = <&edma0 0 2>, @@ -98,6 +117,7 @@ uart1: serial@40028000 { compatible = "fsl,vf610-lpuart"; reg = <0x40028000 0x1000>; + interrupts = <62 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART1>; clock-names = "ipg"; dmas = <&edma0 0 4>, @@ -109,6 +129,7 @@ uart2: serial@40029000 { compatible = "fsl,vf610-lpuart"; reg = <0x40029000 0x1000>; + interrupts = <63 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART2>; clock-names = "ipg"; dmas = <&edma0 0 6>, @@ -120,6 +141,7 @@ uart3: serial@4002a000 { compatible = "fsl,vf610-lpuart"; reg = <0x4002a000 0x1000>; + interrupts = <64 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART3>; clock-names = "ipg"; dmas = <&edma0 0 8>, @@ -133,15 +155,29 @@ #size-cells = <0>; compatible = "fsl,vf610-dspi"; reg = <0x4002c000 0x1000>; + interrupts = <67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_DSPI0>; clock-names = "dspi"; spi-num-chipselects = <5>; status = "disabled"; }; + dspi1: dspi1@4002d000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-dspi"; + reg = <0x4002d000 0x1000>; + interrupts = <68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_DSPI1>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + status = "disabled"; + }; + sai2: sai@40031000 { compatible = "fsl,vf610-sai"; reg = <0x40031000 0x1000>; + interrupts = <86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_SAI2>; clock-names = "sai"; dma-names = "tx", "rx"; @@ -153,6 +189,7 @@ pit: pit@40037000 { compatible = "fsl,vf610-pit"; reg = <0x40037000 0x1000>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_PIT>; clock-names = "pit"; }; @@ -186,6 +223,7 @@ adc0: adc@4003b000 { compatible = "fsl,vf610-adc"; reg = <0x4003b000 0x1000>; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_ADC0>; clock-names = "adc"; status = "disabled"; @@ -194,6 +232,7 @@ wdoga5: wdog@4003e000 { compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; reg = <0x4003e000 0x1000>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_WDT>; clock-names = "wdog"; status = "disabled"; @@ -204,6 +243,7 @@ #size-cells = <0>; compatible = "fsl,vf610-qspi"; reg = <0x40044000 0x1000>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_QSPI0_EN>, <&clks VF610_CLK_QSPI0>; clock-names = "qspi_en", "qspi"; @@ -213,7 +253,6 @@ iomuxc: iomuxc@40048000 { compatible = "fsl,vf610-iomuxc"; reg = <0x40048000 0x1000>; - #gpio-range-cells = <3>; }; gpio0: gpio@40049000 { @@ -221,6 +260,7 @@ reg = <0x40049000 0x1000 0x400ff000 0x40>; gpio-controller; #gpio-cells = <2>; + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 0 32>; @@ -231,6 +271,7 @@ reg = <0x4004a000 0x1000 0x400ff040 0x40>; gpio-controller; #gpio-cells = <2>; + interrupts = <108 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 32 32>; @@ -241,6 +282,7 @@ reg = <0x4004b000 0x1000 0x400ff080 0x40>; gpio-controller; #gpio-cells = <2>; + interrupts = <109 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 64 32>; @@ -251,6 +293,7 @@ reg = <0x4004c000 0x1000 0x400ff0c0 0x40>; gpio-controller; #gpio-cells = <2>; + interrupts = <110 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 96 32>; @@ -261,6 +304,7 @@ reg = <0x4004d000 0x1000 0x400ff100 0x40>; gpio-controller; #gpio-cells = <2>; + interrupts = <111 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 128 7>; @@ -274,6 +318,7 @@ usbphy0: usbphy@40050800 { compatible = "fsl,vf610-usbphy"; reg = <0x40050800 0x400>; + interrupts = <50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBPHY0>; fsl,anatop = <&anatop>; status = "disabled"; @@ -282,6 +327,7 @@ usbphy1: usbphy@40050c00 { compatible = "fsl,vf610-usbphy"; reg = <0x40050c00 0x400>; + interrupts = <51 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBPHY1>; fsl,anatop = <&anatop>; status = "disabled"; @@ -292,6 +338,7 @@ #size-cells = <0>; compatible = "fsl,vf610-i2c"; reg = <0x40066000 0x1000>; + interrupts = <71 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_I2C0>; clock-names = "ipg"; dmas = <&edma0 0 50>, @@ -311,6 +358,7 @@ usbdev0: usb@40034000 { compatible = "fsl,vf610-usb", "fsl,imx27-usb"; reg = <0x40034000 0x800>; + interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBC0>; fsl,usbphy = <&usbphy0>; fsl,usbmisc = <&usbmisc0 0>; @@ -329,6 +377,7 @@ src: src@4006e000 { compatible = "fsl,vf610-src", "syscon"; reg = <0x4006e000 0x1000>; + interrupts = <96 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -345,6 +394,9 @@ <0x400a1000 0x1000>, <0x400a2000 0x1000>; dma-channels = <32>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>, + <11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma-tx", "edma-err"; clock-names = "dmamux0", "dmamux1"; clocks = <&clks VF610_CLK_DMAMUX2>, <&clks VF610_CLK_DMAMUX3>; @@ -360,6 +412,7 @@ snvsrtc: snvs-rtc-lp@34 { compatible = "fsl,sec-v4.0-mon-rtc-lp"; reg = <0x34 0x58>; + interrupts = <100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_SNVS>; clock-names = "snvs-rtc"; }; @@ -368,6 +421,7 @@ uart4: serial@400a9000 { compatible = "fsl,vf610-lpuart"; reg = <0x400a9000 0x1000>; + interrupts = <65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART4>; clock-names = "ipg"; status = "disabled"; @@ -376,6 +430,7 @@ uart5: serial@400aa000 { compatible = "fsl,vf610-lpuart"; reg = <0x400aa000 0x1000>; + interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART5>; clock-names = "ipg"; status = "disabled"; @@ -384,6 +439,7 @@ adc1: adc@400bb000 { compatible = "fsl,vf610-adc"; reg = <0x400bb000 0x1000>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_ADC1>; clock-names = "adc"; status = "disabled"; @@ -392,6 +448,7 @@ esdhc1: esdhc@400b2000 { compatible = "fsl,imx53-esdhc"; reg = <0x400b2000 0x1000>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_IPG_BUS>, <&clks VF610_CLK_PLATFORM_BUS>, <&clks VF610_CLK_ESDHC1>; @@ -402,6 +459,7 @@ usbh1: usb@400b4000 { compatible = "fsl,vf610-usb", "fsl,imx27-usb"; reg = <0x400b4000 0x800>; + interrupts = <76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBC1>; fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc1 0>; @@ -420,6 +478,7 @@ ftm: ftm@400b8000 { compatible = "fsl,ftm-timer"; reg = <0x400b8000 0x1000 0x400b9000 0x1000>; + interrupts = <44 IRQ_TYPE_LEVEL_HIGH>; clock-names = "ftm-evt", "ftm-src", "ftm-evt-counter-en", "ftm-src-counter-en"; clocks = <&clks VF610_CLK_FTM2>, @@ -432,6 +491,7 @@ fec0: ethernet@400d0000 { compatible = "fsl,mvf600-fec"; reg = <0x400d0000 0x1000>; + interrupts = <78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_ENET0>, <&clks VF610_CLK_ENET0>, <&clks VF610_CLK_ENET>; @@ -442,6 +502,7 @@ fec1: ethernet@400d1000 { compatible = "fsl,mvf600-fec"; reg = <0x400d1000 0x1000>; + interrupts = <79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_ENET1>, <&clks VF610_CLK_ENET1>, <&clks VF610_CLK_ENET>; @@ -452,6 +513,7 @@ can1: flexcan@400d4000 { compatible = "fsl,vf610-flexcan"; reg = <0x400d4000 0x4000>; + interrupts = <59 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_FLEXCAN1>, <&clks VF610_CLK_FLEXCAN1>; clock-names = "ipg", "per"; diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c index 6eaddc47c43d..37dc0fe1093f 100644 --- a/arch/arm/common/bL_switcher.c +++ b/arch/arm/common/bL_switcher.c @@ -151,8 +151,6 @@ static int bL_switch_to(unsigned int new_cluster_id) unsigned int mpidr, this_cpu, that_cpu; unsigned int ob_mpidr, ob_cpu, ob_cluster, ib_mpidr, ib_cpu, ib_cluster; struct completion inbound_alive; - struct tick_device *tdev; - enum clock_event_mode tdev_mode; long volatile *handshake_ptr; int ipi_nr, ret; @@ -219,13 +217,7 @@ static int bL_switch_to(unsigned int new_cluster_id) /* redirect GIC's SGIs to our counterpart */ gic_migrate_target(bL_gic_id[ib_cpu][ib_cluster]); - tdev = tick_get_device(this_cpu); - if (tdev && !cpumask_equal(tdev->evtdev->cpumask, cpumask_of(this_cpu))) - tdev = NULL; - if (tdev) { - tdev_mode = tdev->evtdev->mode; - clockevents_set_mode(tdev->evtdev, CLOCK_EVT_MODE_SHUTDOWN); - } + tick_suspend_local(); ret = cpu_pm_enter(); @@ -251,11 +243,7 @@ static int bL_switch_to(unsigned int new_cluster_id) ret = cpu_pm_exit(); - if (tdev) { - clockevents_set_mode(tdev->evtdev, tdev_mode); - clockevents_program_event(tdev->evtdev, - tdev->evtdev->next_event, 1); - } + tick_resume_local(); trace_cpu_migrate_finish(ktime_get_real_ns(), ib_mpidr); local_fiq_enable(); diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index 3c165fc2dce2..5f8a52ac7edf 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -55,22 +55,81 @@ bool mcpm_is_available(void) return (platform_ops) ? true : false; } +/* + * We can't use regular spinlocks. In the switcher case, it is possible + * for an outbound CPU to call power_down() after its inbound counterpart + * is already live using the same logical CPU number which trips lockdep + * debugging. + */ +static arch_spinlock_t mcpm_lock = __ARCH_SPIN_LOCK_UNLOCKED; + +static int mcpm_cpu_use_count[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER]; + +static inline bool mcpm_cluster_unused(unsigned int cluster) +{ + int i, cnt; + for (i = 0, cnt = 0; i < MAX_CPUS_PER_CLUSTER; i++) + cnt |= mcpm_cpu_use_count[cluster][i]; + return !cnt; +} + int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster) { + bool cpu_is_down, cluster_is_down; + int ret = 0; + if (!platform_ops) return -EUNATCH; /* try not to shadow power_up errors */ might_sleep(); - return platform_ops->power_up(cpu, cluster); + + /* backward compatibility callback */ + if (platform_ops->power_up) + return platform_ops->power_up(cpu, cluster); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + + /* + * Since this is called with IRQs enabled, and no arch_spin_lock_irq + * variant exists, we need to disable IRQs manually here. + */ + local_irq_disable(); + arch_spin_lock(&mcpm_lock); + + cpu_is_down = !mcpm_cpu_use_count[cluster][cpu]; + cluster_is_down = mcpm_cluster_unused(cluster); + + mcpm_cpu_use_count[cluster][cpu]++; + /* + * The only possible values are: + * 0 = CPU down + * 1 = CPU (still) up + * 2 = CPU requested to be up before it had a chance + * to actually make itself down. + * Any other value is a bug. + */ + BUG_ON(mcpm_cpu_use_count[cluster][cpu] != 1 && + mcpm_cpu_use_count[cluster][cpu] != 2); + + if (cluster_is_down) + ret = platform_ops->cluster_powerup(cluster); + if (cpu_is_down && !ret) + ret = platform_ops->cpu_powerup(cpu, cluster); + + arch_spin_unlock(&mcpm_lock); + local_irq_enable(); + return ret; } typedef void (*phys_reset_t)(unsigned long); void mcpm_cpu_power_down(void) { + unsigned int mpidr, cpu, cluster; + bool cpu_going_down, last_man; phys_reset_t phys_reset; - if (WARN_ON_ONCE(!platform_ops || !platform_ops->power_down)) - return; + if (WARN_ON_ONCE(!platform_ops)) + return; BUG_ON(!irqs_disabled()); /* @@ -79,28 +138,65 @@ void mcpm_cpu_power_down(void) */ setup_mm_for_reboot(); - platform_ops->power_down(); + /* backward compatibility callback */ + if (platform_ops->power_down) { + platform_ops->power_down(); + goto not_dead; + } + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + + __mcpm_cpu_going_down(cpu, cluster); + arch_spin_lock(&mcpm_lock); + BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); + + mcpm_cpu_use_count[cluster][cpu]--; + BUG_ON(mcpm_cpu_use_count[cluster][cpu] != 0 && + mcpm_cpu_use_count[cluster][cpu] != 1); + cpu_going_down = !mcpm_cpu_use_count[cluster][cpu]; + last_man = mcpm_cluster_unused(cluster); + + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { + platform_ops->cpu_powerdown_prepare(cpu, cluster); + platform_ops->cluster_powerdown_prepare(cluster); + arch_spin_unlock(&mcpm_lock); + platform_ops->cluster_cache_disable(); + __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); + } else { + if (cpu_going_down) + platform_ops->cpu_powerdown_prepare(cpu, cluster); + arch_spin_unlock(&mcpm_lock); + /* + * If cpu_going_down is false here, that means a power_up + * request raced ahead of us. Even if we do not want to + * shut this CPU down, the caller still expects execution + * to return through the system resume entry path, like + * when the WFI is aborted due to a new IRQ or the like.. + * So let's continue with cache cleaning in all cases. + */ + platform_ops->cpu_cache_disable(); + } + + __mcpm_cpu_down(cpu, cluster); + + /* Now we are prepared for power-down, do it: */ + if (cpu_going_down) + wfi(); + +not_dead: /* * It is possible for a power_up request to happen concurrently * with a power_down request for the same CPU. In this case the - * power_down method might not be able to actually enter a - * powered down state with the WFI instruction if the power_up - * method has removed the required reset condition. The - * power_down method is then allowed to return. We must perform - * a re-entry in the kernel as if the power_up method just had - * deasserted reset on the CPU. - * - * To simplify race issues, the platform specific implementation - * must accommodate for the possibility of unordered calls to - * power_down and power_up with a usage count. Therefore, if a - * call to power_up is issued for a CPU that is not down, then - * the next call to power_down must not attempt a full shutdown - * but only do the minimum (normally disabling L1 cache and CPU - * coherency) and return just as if a concurrent power_up request - * had happened as described above. + * CPU might not be able to actually enter a powered down state + * with the WFI instruction if the power_up request has removed + * the required reset condition. We must perform a re-entry in + * the kernel as if the power_up method just had deasserted reset + * on the CPU. */ - phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); phys_reset(virt_to_phys(mcpm_entry_point)); @@ -125,26 +221,66 @@ int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster) void mcpm_cpu_suspend(u64 expected_residency) { - phys_reset_t phys_reset; - - if (WARN_ON_ONCE(!platform_ops || !platform_ops->suspend)) + if (WARN_ON_ONCE(!platform_ops)) return; - BUG_ON(!irqs_disabled()); - /* Very similar to mcpm_cpu_power_down() */ - setup_mm_for_reboot(); - platform_ops->suspend(expected_residency); - phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); - phys_reset(virt_to_phys(mcpm_entry_point)); - BUG(); + /* backward compatibility callback */ + if (platform_ops->suspend) { + phys_reset_t phys_reset; + BUG_ON(!irqs_disabled()); + setup_mm_for_reboot(); + platform_ops->suspend(expected_residency); + phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); + phys_reset(virt_to_phys(mcpm_entry_point)); + BUG(); + } + + /* Some platforms might have to enable special resume modes, etc. */ + if (platform_ops->cpu_suspend_prepare) { + unsigned int mpidr = read_cpuid_mpidr(); + unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + arch_spin_lock(&mcpm_lock); + platform_ops->cpu_suspend_prepare(cpu, cluster); + arch_spin_unlock(&mcpm_lock); + } + mcpm_cpu_power_down(); } int mcpm_cpu_powered_up(void) { + unsigned int mpidr, cpu, cluster; + bool cpu_was_down, first_man; + unsigned long flags; + if (!platform_ops) return -EUNATCH; - if (platform_ops->powered_up) + + /* backward compatibility callback */ + if (platform_ops->powered_up) { platform_ops->powered_up(); + return 0; + } + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + local_irq_save(flags); + arch_spin_lock(&mcpm_lock); + + cpu_was_down = !mcpm_cpu_use_count[cluster][cpu]; + first_man = mcpm_cluster_unused(cluster); + + if (first_man && platform_ops->cluster_is_up) + platform_ops->cluster_is_up(cluster); + if (cpu_was_down) + mcpm_cpu_use_count[cluster][cpu] = 1; + if (platform_ops->cpu_is_up) + platform_ops->cpu_is_up(cpu, cluster); + + arch_spin_unlock(&mcpm_lock); + local_irq_restore(flags); + return 0; } @@ -334,8 +470,10 @@ int __init mcpm_sync_init( } mpidr = read_cpuid_mpidr(); this_cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - for_each_online_cpu(i) + for_each_online_cpu(i) { + mcpm_cpu_use_count[this_cluster][i] = 1; mcpm_sync.clusters[this_cluster].cpus[i].cpu = CPU_UP; + } mcpm_sync.clusters[this_cluster].cluster = CLUSTER_UP; sync_cache_w(&mcpm_sync); diff --git a/arch/arm/configs/ape6evm_defconfig b/arch/arm/configs/ape6evm_defconfig deleted file mode 100644 index 9e9a72e3d30f..000000000000 --- a/arch/arm/configs/ape6evm_defconfig +++ /dev/null @@ -1,109 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_CGROUPS=y -CONFIG_CGROUP_SCHED=y -CONFIG_KALLSYMS_ALL=y -CONFIG_EMBEDDED=y -CONFIG_PERF_EVENTS=y -CONFIG_SLAB=y -CONFIG_ARCH_SHMOBILE_LEGACY=y -CONFIG_ARCH_R8A73A4=y -CONFIG_MACH_APE6EVM=y -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BPREDICT_DISABLE=y -CONFIG_PL310_ERRATA_588369=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_SMP=y -CONFIG_SCHED_MC=y -CONFIG_HAVE_ARM_ARCH_TIMER=y -CONFIG_NR_CPUS=8 -CONFIG_AEABI=y -CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y -# CONFIG_HW_PERF_EVENTS is not set -# CONFIG_COMPACTION is not set -# CONFIG_CROSS_MEMORY_ATTACH is not set -CONFIG_ARM_APPENDED_DTB=y -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6_SIT is not set -CONFIG_NETFILTER=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_FW_LOADER_USER_HELPER is not set -CONFIG_NETDEVICES=y -# CONFIG_NET_CADENCE is not set -CONFIG_SMC91X=y -CONFIG_SMSC911X=y -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=12 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_SH_MOBILE=y -CONFIG_GPIO_SH_PFC=y -CONFIG_GPIOLIB=y -# CONFIG_HWMON is not set -CONFIG_THERMAL=y -CONFIG_RCAR_THERMAL=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_GPIO=y -CONFIG_REGULATOR_MAX8973=y -# CONFIG_HID is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_MMC=y -CONFIG_MMC_SDHI=y -CONFIG_MMC_SH_MMCIF=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_DMADEVICES=y -CONFIG_SH_DMAE=y -# CONFIG_IOMMU_SUPPORT is not set -# CONFIG_DNOTIFY is not set -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFS_V4_1=y -CONFIG_ROOT_NFS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_ENABLE_DEFAULT_TRACERS=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=y -CONFIG_CRYPTO_TWOFISH=y -CONFIG_CRC_CCITT=y -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=y -CONFIG_CRC7=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index f2670f638e97..bcef49a21801 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -13,10 +13,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_MULTI_V4T=y +CONFIG_ARCH_MULTI_V5=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_AT91=y +CONFIG_SOC_SAM_V4_V5=y CONFIG_SOC_AT91RM9200=y CONFIG_SOC_AT91SAM9=y -CONFIG_AT91_TIMER_HZ=128 CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -70,6 +73,7 @@ CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y +CONFIG_ARM_AT91_ETHER=y CONFIG_MACB=y # CONFIG_NET_VENDOR_BROADCOM is not set CONFIG_DM9000=y diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index 0494c8f229a2..d59009878312 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -12,7 +12,6 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_ARTHUR=m CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 1d8935359fd0..d034c96c039b 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -26,6 +26,8 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" +CONFIG_CPU_IDLE=y +CONFIG_ARM_EXYNOS_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_PM=y @@ -34,6 +36,14 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +CONFIG_MWIFIEX=y +CONFIG_MWIFIEX_SDIO=y CONFIG_RFKILL_REGULATOR=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y @@ -91,9 +101,11 @@ CONFIG_CHARGER_MAX77693=y CONFIG_CHARGER_TPS65090=y CONFIG_HWMON=y CONFIG_SENSORS_LM90=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_THERMAL=y CONFIG_THERMAL=y CONFIG_EXYNOS_THERMAL=y -CONFIG_EXYNOS_THERMAL_CORE=y +CONFIG_THERMAL_EMULATION=y CONFIG_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y CONFIG_MFD_CROS_EC=y @@ -118,6 +130,7 @@ CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS65090=y CONFIG_DRM=y +CONFIG_DRM_EXYNOS_HDMI=y CONFIG_DRM_BRIDGE=y CONFIG_DRM_PTN3460=y CONFIG_DRM_PS8622=y @@ -171,10 +184,11 @@ CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_S3C=y CONFIG_DMADEVICES=y CONFIG_PL330_DMA=y +CONFIG_CHROME_PLATFORMS=y +CONFIG_CROS_EC_CHARDEV=y CONFIG_COMMON_CLK_MAX77686=y CONFIG_COMMON_CLK_MAX77802=y CONFIG_COMMON_CLK_S2MPS11=y -CONFIG_EXYNOS_IOMMU=y CONFIG_EXTCON=y CONFIG_EXTCON_MAX14577=y CONFIG_EXTCON_MAX77693=y @@ -197,6 +211,8 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_CRAMFS=y CONFIG_ROMFS_FS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index e6b0007355f8..d3a8018639de 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -24,9 +24,8 @@ CONFIG_ARCH_MXC=y CONFIG_MACH_SCB9328=y CONFIG_MACH_APF9328=y CONFIG_MACH_MX21ADS=y -CONFIG_MACH_MX25_3DS=y CONFIG_MACH_EUKREA_CPUIMX25SD=y -CONFIG_MACH_IMX25_DT=y +CONFIG_SOC_IMX25=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_MX27_3DS=y CONFIG_MACH_IMX27_VISSTRIM_M10=y @@ -177,6 +176,7 @@ CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set +CONFIG_VFAT_FS=y # CONFIG_PROC_PAGE_MONITOR is not set CONFIG_TMPFS=y CONFIG_JFFS2_FS=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index cf1e71e2f60a..fdeb1c83dcb5 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -71,6 +71,9 @@ CONFIG_IPV6=y CONFIG_NETFILTER=y CONFIG_CAN=y CONFIG_CAN_FLEXCAN=y +CONFIG_BT=y +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_3WIRE=y CONFIG_CFG80211=y CONFIG_MAC80211=y CONFIG_RFKILL=y @@ -168,6 +171,7 @@ CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_MC9S08DZ60=y +CONFIG_GPIO_PCA953X=y CONFIG_GPIO_STMPE=y CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y diff --git a/arch/arm/configs/mackerel_defconfig b/arch/arm/configs/mackerel_defconfig deleted file mode 100644 index 05a529311b4d..000000000000 --- a/arch/arm/configs/mackerel_defconfig +++ /dev/null @@ -1,157 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_UTS_NS is not set -# CONFIG_IPC_NS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_NET_NS is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE_LEGACY=y -CONFIG_ARCH_SH7372=y -CONFIG_MACH_MACKEREL=y -CONFIG_MEMORY_SIZE=0x10000000 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_FORCE_MAX_ZONEORDER=15 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_KEXEC=y -CONFIG_VFP=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_ARM_INTEGRATOR=y -CONFIG_MTD_BLOCK2MTD=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMSC911X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=8 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_SH_MOBILE=y -# CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set -CONFIG_REGULATOR=y -CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_SH_MOBILE_LCDC=y -CONFIG_FB_SH_MOBILE_HDMI=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_VERBOSE_PROCFS is not set -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_ARM is not set -CONFIG_SND_SOC_SH4_FSI=y -CONFIG_USB=y -CONFIG_USB_RENESAS_USBHS_HCD=y -CONFIG_USB_RENESAS_USBHS=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_RENESAS_USBHS_UDC=y -CONFIG_MMC=y -CONFIG_MMC_SDHI=y -CONFIG_MMC_SH_MMCIF=y -CONFIG_DMADEVICES=y -CONFIG_SH_DMAE=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -# CONFIG_DNOTIFY is not set -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFS_V4_1=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=y -CONFIG_NLS_CODEPAGE_775=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_CODEPAGE_852=y -CONFIG_NLS_CODEPAGE_855=y -CONFIG_NLS_CODEPAGE_857=y -CONFIG_NLS_CODEPAGE_860=y -CONFIG_NLS_CODEPAGE_861=y -CONFIG_NLS_CODEPAGE_862=y -CONFIG_NLS_CODEPAGE_863=y -CONFIG_NLS_CODEPAGE_864=y -CONFIG_NLS_CODEPAGE_865=y -CONFIG_NLS_CODEPAGE_866=y -CONFIG_NLS_CODEPAGE_869=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -CONFIG_NLS_ISO8859_3=y -CONFIG_NLS_ISO8859_4=y -CONFIG_NLS_ISO8859_5=y -CONFIG_NLS_ISO8859_6=y -CONFIG_NLS_ISO8859_7=y -CONFIG_NLS_ISO8859_9=y -CONFIG_NLS_ISO8859_13=y -CONFIG_NLS_ISO8859_14=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_KOI8_R=y -CONFIG_NLS_KOI8_U=y -CONFIG_NLS_UTF8=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_ARM_UNWIND is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ANSI_CPRNG=y diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig deleted file mode 100644 index dd18c9e527d6..000000000000 --- a/arch/arm/configs/msm_defconfig +++ /dev/null @@ -1,121 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS_ALL=y -CONFIG_EMBEDDED=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_ARCH_MSM=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y -CONFIG_CLEANCACHE=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_VFP=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_CFG80211=y -CONFIG_RFKILL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_CHR_DEV_SCH=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_SLIP=y -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_MODE_SLIP6=y -CONFIG_USB_USBNET=y -# CONFIG_USB_NET_AX8817X is not set -# CONFIG_USB_NET_ZAURUS is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_MOUSE_PS2 is not set -CONFIG_INPUT_JOYSTICK=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_MSM=y -CONFIG_SERIAL_MSM_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_DEBUG_GPIO=y -CONFIG_GPIO_SYSFS=y -CONFIG_THERMAL=y -CONFIG_REGULATOR=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_FB=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_DYNAMIC_MINORS=y -# CONFIG_SND_ARM is not set -# CONFIG_SND_SPI is not set -# CONFIG_SND_USB is not set -CONFIG_SND_SOC=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_ACM=y -CONFIG_USB_SERIAL=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_GADGET_VBUS_DRAW=500 -CONFIG_RTC_CLASS=y -CONFIG_STAGING=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_EXT4_FS=y -CONFIG_FUSE_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_CIFS=y -CONFIG_PRINTK_TIME=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_DEBUG_INFO=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOCKUP_DETECTOR=y -# CONFIG_DETECT_HUNG_TASK is not set -# CONFIG_SCHED_DEBUG is not set -CONFIG_TIMER_STATS=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 9d56781a8f80..f69a459f4f92 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -13,7 +13,7 @@ CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y CONFIG_MACH_NETXBIG=y CONFIG_ARCH_MXC=y -CONFIG_MACH_IMX25_DT=y +CONFIG_SOC_IMX25=y CONFIG_MACH_IMX27_DT=y CONFIG_ARCH_U300=y CONFIG_PCI_MVEBU=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index e8a4c955241b..ab86655c1f4b 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -12,10 +12,12 @@ CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y CONFIG_CMDLINE_PARTITION=y CONFIG_ARCH_VIRT=y +CONFIG_ARCH_ALPINE=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y CONFIG_MACH_ARMADA_38X=y +CONFIG_MACH_ARMADA_39X=y CONFIG_MACH_ARMADA_XP=y CONFIG_MACH_DOVE=y CONFIG_ARCH_BCM=y @@ -62,6 +64,17 @@ CONFIG_MACH_SPEAR1340=y CONFIG_ARCH_STI=y CONFIG_ARCH_EXYNOS=y CONFIG_EXYNOS5420_MCPM=y +CONFIG_ARCH_SHMOBILE_MULTI=y +CONFIG_ARCH_EMEV2=y +CONFIG_ARCH_R7S72100=y +CONFIG_ARCH_R8A73A4=y +CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A7779=y +CONFIG_ARCH_R8A7790=y +CONFIG_ARCH_R8A7791=y +CONFIG_ARCH_R8A7794=y +CONFIG_ARCH_SH73A0=y +CONFIG_MACH_MARZEN=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_SIRF=y CONFIG_ARCH_TEGRA=y @@ -80,13 +93,16 @@ CONFIG_ARCH_WM8850=y CONFIG_ARCH_ZYNQ=y CONFIG_TRUSTED_FOUNDATIONS=y CONFIG_PCI=y +CONFIG_PCI_HOST_GENERIC=y CONFIG_PCI_KEYSTONE=y CONFIG_PCI_MSI=y CONFIG_PCI_MVEBU=y CONFIG_PCI_TEGRA=y +CONFIG_PCI_RCAR_GEN2=y +CONFIG_PCI_RCAR_GEN2_PCIE=y CONFIG_PCIEPORTBUS=y CONFIG_SMP=y -CONFIG_NR_CPUS=8 +CONFIG_NR_CPUS=16 CONFIG_HIGHPTE=y CONFIG_CMA=y CONFIG_ARM_APPENDED_DTB=y @@ -120,6 +136,9 @@ CONFIG_CAN_BCM=y CONFIG_CAN_DEV=y CONFIG_CAN_XILINXCAN=y CONFIG_CAN_MCP251X=y +CONFIG_BT=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_RFKILL=y @@ -130,6 +149,7 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_OMAP_OCP2SCP=y +CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -157,6 +177,7 @@ CONFIG_AHCI_SUNXI=y CONFIG_AHCI_TEGRA=y CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y +CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y CONFIG_HIX5HD2_GMAC=y CONFIG_SUN4I_EMAC=y @@ -167,14 +188,17 @@ CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y CONFIG_KS8851=y CONFIG_R8169=y +CONFIG_SH_ETH=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y CONFIG_TI_CPSW=y CONFIG_XILINX_EMACLITE=y CONFIG_AT803X_PHY=y CONFIG_MARVELL_PHY=y +CONFIG_SMSC_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y +CONFIG_MICREL_PHY=y CONFIG_USB_PEGASUS=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y @@ -182,6 +206,8 @@ CONFIG_USB_NET_SMSC95XX=y CONFIG_BRCMFMAC=m CONFIG_RT2X00=m CONFIG_RT2800USB=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y @@ -190,17 +216,21 @@ CONFIG_KEYBOARD_SPEAR=y CONFIG_KEYBOARD_ST_KEYSCAN=y CONFIG_KEYBOARD_CROS_EC=y CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_MOUSE_ELAN_I2C=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y +CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_STMPE=y CONFIG_TOUCHSCREEN_SUN4I=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y CONFIG_INPUT_AXP20X_PEK=y +CONFIG_INPUT_ADXL34X=m CONFIG_SERIO_AMBAKMI=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_8250_EM=y CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y @@ -213,6 +243,9 @@ CONFIG_SERIAL_SIRFSOC_CONSOLE=y CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=20 +CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_SERIAL_VT8500=y @@ -233,19 +266,26 @@ CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_CADENCE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_I2C_GPIO=m CONFIG_I2C_EXYNOS5=y CONFIG_I2C_MV64XXX=y +CONFIG_I2C_RIIC=y CONFIG_I2C_S3C2410=y +CONFIG_I2C_SH_MOBILE=y CONFIG_I2C_SIRF=y -CONFIG_I2C_TEGRA=y CONFIG_I2C_ST=y -CONFIG_SPI=y +CONFIG_I2C_TEGRA=y CONFIG_I2C_XILINX=y -CONFIG_SPI_DAVINCI=y +CONFIG_I2C_RCAR=y +CONFIG_SPI=y CONFIG_SPI_CADENCE=y +CONFIG_SPI_DAVINCI=y CONFIG_SPI_OMAP24XX=y CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y +CONFIG_SPI_RSPI=y +CONFIG_SPI_SH_MSIOF=m +CONFIG_SPI_SH_HSPI=y CONFIG_SPI_SIRF=y CONFIG_SPI_SUN4I=y CONFIG_SPI_SUN6I=y @@ -259,12 +299,15 @@ CONFIG_PINCTRL_PALMAS=y CONFIG_PINCTRL_APQ8084=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC_PLATFORM=y -CONFIG_GPIO_DWAPB=y CONFIG_GPIO_DAVINCI=y +CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_EM=y +CONFIG_GPIO_RCAR=y CONFIG_GPIO_XILINX=y CONFIG_GPIO_ZYNQ=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y +CONFIG_GPIO_PCF857X=y CONFIG_GPIO_TWL4030=y CONFIG_GPIO_PALMAS=y CONFIG_GPIO_SYSCON=y @@ -274,12 +317,15 @@ CONFIG_BATTERY_SBS=y CONFIG_CHARGER_TPS65090=y CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_RESET_GPIO_RESTART=y CONFIG_POWER_RESET_KEYSTONE=y CONFIG_POWER_RESET_SUN6I=y +CONFIG_POWER_RESET_RMOBILE=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM95245=y CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y +CONFIG_RCAR_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_DAVINCI_WATCHDOG CONFIG_ST_THERMAL_SYSCFG=y @@ -290,6 +336,7 @@ CONFIG_ARM_SP805_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_MESON_WATCHDOG=y +CONFIG_MFD_AS3711=y CONFIG_MFD_AS3722=y CONFIG_MFD_BCM590XX=y CONFIG_MFD_AXP20X=y @@ -304,13 +351,16 @@ CONFIG_MFD_TPS65090=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y CONFIG_REGULATOR_AB8500=y +CONFIG_REGULATOR_AS3711=y CONFIG_REGULATOR_AS3722=y CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_BCM590XX=y +CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_GPIO=y CONFIG_MFD_SYSCON=y CONFIG_POWER_RESET_SYSCON=y CONFIG_REGULATOR_MAX8907=y +CONFIG_REGULATOR_MAX8973=y CONFIG_REGULATOR_MAX77686=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_S2MPS11=y @@ -324,18 +374,32 @@ CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_VEXPRESS=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=y CONFIG_USB_GSPCA=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_SOC_CAMERA=m +CONFIG_SOC_CAMERA_PLATFORM=m +CONFIG_VIDEO_RCAR_VIN=m +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_RENESAS_VSP1=m +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_VIDEO_ADV7180=m CONFIG_DRM=y +CONFIG_DRM_RCAR_DU=m CONFIG_DRM_TEGRA=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_FB_ARMCLCD=y CONFIG_FB_WM8505=y +CONFIG_FB_SH_MOBILE_LCDC=y CONFIG_FB_SIMPLE=y +CONFIG_FB_SH_MOBILE_MERAM=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y +CONFIG_BACKLIGHT_AS3711=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_SOUND=y @@ -343,6 +407,8 @@ CONFIG_SND=y CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_USB_AUDIO=y CONFIG_SND_SOC=y +CONFIG_SND_SOC_SH4_FSI=m +CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_TEGRA=y CONFIG_SND_SOC_TEGRA_RT5640=y CONFIG_SND_SOC_TEGRA_WM8753=y @@ -350,6 +416,8 @@ CONFIG_SND_SOC_TEGRA_WM8903=y CONFIG_SND_SOC_TEGRA_TRIMSLICE=y CONFIG_SND_SOC_TEGRA_ALC5632=y CONFIG_SND_SOC_TEGRA_MAX98090=y +CONFIG_SND_SOC_AK4642=m +CONFIG_SND_SOC_WM8978=m CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_MVEBU=y @@ -362,6 +430,8 @@ CONFIG_USB_ISP1760_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_STI=y CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_R8A66597_HCD=m +CONFIG_USB_RENESAS_USBHS=m CONFIG_USB_STORAGE=y CONFIG_USB_DWC3=y CONFIG_USB_CHIPIDEA=y @@ -374,6 +444,10 @@ CONFIG_SAMSUNG_USB3PHY=y CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y CONFIG_USB_MXS_PHY=y +CONFIG_USB_RCAR_PHY=m +CONFIG_USB_RCAR_GEN2_PHY=m +CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y @@ -392,12 +466,14 @@ CONFIG_MMC_SDHCI_ST=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_MVSDIO=y -CONFIG_MMC_SUNXI=y +CONFIG_MMC_SDHI=y CONFIG_MMC_DW=y CONFIG_MMC_DW_IDMAC=y CONFIG_MMC_DW_PLTFM=y CONFIG_MMC_DW_EXYNOS=y CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SH_MMCIF=y +CONFIG_MMC_SUNXI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y @@ -421,10 +497,12 @@ CONFIG_RTC_DRV_AS3722=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_MAX8907=y CONFIG_RTC_DRV_MAX77686=y +CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_TWL4030=y CONFIG_RTC_DRV_TPS6586X=y CONFIG_RTC_DRV_TPS65910=y +CONFIG_RTC_DRV_S35390A=m CONFIG_RTC_DRV_EM3027=y CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_VT8500=y @@ -436,6 +514,8 @@ CONFIG_DMADEVICES=y CONFIG_DW_DMAC=y CONFIG_MV_XOR=y CONFIG_TEGRA20_APB_DMA=y +CONFIG_SH_DMAE=y +CONFIG_RCAR_DMAC=y CONFIG_STE_DMA40=y CONFIG_SIRF_DMA=y CONFIG_TI_EDMA=y @@ -462,12 +542,15 @@ CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y +CONFIG_PM_DEVFREQ=y +CONFIG_ARM_TEGRA_DEVFREQ=m CONFIG_MEMORY=y CONFIG_TI_AEMIF=y CONFIG_IIO=y CONFIG_XILINX_XADC=y CONFIG_AK8975=y CONFIG_PWM=y +CONFIG_PWM_RENESAS_TPU=y CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y CONFIG_PHY_HIX5HD2_SATA=y @@ -478,6 +561,7 @@ CONFIG_PHY_MIPHY365X=y CONFIG_PHY_STIH41X_USB=y CONFIG_PHY_STIH407_USB=y CONFIG_PHY_SUN4I_USB=y +CONFIG_PHY_SUN9I_USB=y CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index 73673e95f23c..cacc9f4055a7 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -5,6 +5,7 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y +CONFIG_PERF_EVENTS=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -12,6 +13,7 @@ CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y CONFIG_MACH_ARMADA_38X=y +CONFIG_MACH_ARMADA_39X=y CONFIG_MACH_ARMADA_XP=y CONFIG_MACH_DOVE=y CONFIG_PCI=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index c7906c2fd645..b47e7c6628c9 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -149,6 +149,7 @@ CONFIG_EXT4_FS=y CONFIG_FSCACHE=m CONFIG_FSCACHE_STATS=y CONFIG_CACHEFILES=m +CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_JFFS2_FS=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index a7dce674f1be..0c8a78734536 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -34,7 +33,6 @@ CONFIG_ARCH_OMAP16XX=y CONFIG_MACH_OMAP_INNOVATOR=y CONFIG_MACH_OMAP_H2=y CONFIG_MACH_OMAP_H3=y -CONFIG_MACH_OMAP_HTCWIZARD=y CONFIG_MACH_HERALD=y CONFIG_MACH_OMAP_OSK=y CONFIG_MACH_OMAP_PERSEUS2=y @@ -55,7 +53,6 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=1f03 rootfstype=jffs2" @@ -80,8 +77,6 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_IPV6=y CONFIG_NETFILTER=y CONFIG_BT=y -CONFIG_BT_L2CAP=y -CONFIG_BT_SCO=y CONFIG_BT_RFCOMM=y CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=y @@ -92,11 +87,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_CONNECTOR=y # CONFIG_PROC_EVENTS is not set CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=3 -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y @@ -113,11 +104,9 @@ CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y CONFIG_TUN=y CONFIG_PHYLIB=y -CONFIG_NET_ETHERNET=y CONFIG_SMC91X=y CONFIG_USB_CATC=y CONFIG_USB_KAWETH=y @@ -158,7 +147,6 @@ CONFIG_SPI_OMAP_UWIRE=y CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_OMAP_WATCHDOG=y -CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y @@ -168,7 +156,6 @@ CONFIG_FB_OMAP_LCDC_EXTERNAL=y CONFIG_FB_OMAP_LCDC_HWA742=y CONFIG_FB_OMAP_MANUAL_UPDATE=y CONFIG_FB_OMAP_LCD_MIPID=y -CONFIG_FB_OMAP_BOOTLOADER_INIT=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -194,7 +181,6 @@ CONFIG_SND_OMAP_SOC=y # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_PHY=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y @@ -261,9 +247,7 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_SECURITY=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_PCBC=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index b7386524c356..9ff7b54b2a83 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -1,3 +1,4 @@ +CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_FHANDLE=y @@ -86,17 +87,33 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y # CONFIG_INET_LRO is not set CONFIG_NETFILTER=y +CONFIG_PHONET=m CONFIG_CAN=m CONFIG_CAN_C_CAN=m CONFIG_CAN_C_CAN_PLATFORM=m CONFIG_BT=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTSDIO=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIUART_3WIRE=y CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_CFG80211=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_AF_RXRPC=m +CONFIG_RXKAD=m CONFIG_MAC80211=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -114,6 +131,7 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ECC_BCH=y CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_BCH=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_OMAP2=y @@ -162,6 +180,7 @@ CONFIG_USB_EPSON2888=y CONFIG_USB_EHCI_HCD=m CONFIG_USB_OHCI_HCD=m CONFIG_USB_KC2190=y +CONFIG_USB_CDC_PHONET=m CONFIG_LIBERTAS=m CONFIG_LIBERTAS_USB=m CONFIG_LIBERTAS_SDIO=m @@ -208,6 +227,10 @@ CONFIG_I2C_CHARDEV=y CONFIG_SPI=y CONFIG_SPI_OMAP24XX=y CONFIG_SPI_TI_QSPI=m +CONFIG_HSI=m +CONFIG_OMAP_SSI=m +CONFIG_NOKIA_MODEM=m +CONFIG_SSI_PROTOCOL=m CONFIG_PINCTRL_SINGLE=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y @@ -248,6 +271,7 @@ CONFIG_TWL6040_CORE=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_PBIAS=y CONFIG_REGULATOR_TI_ABB=y +CONFIG_REGULATOR_TPS62360=m CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65217=y @@ -332,6 +356,7 @@ CONFIG_USB_CONFIGFS_ECM=y CONFIG_USB_CONFIGFS_ECM_SUBSET=y CONFIG_USB_CONFIGFS_RNDIS=y CONFIG_USB_CONFIGFS_EEM=y +CONFIG_USB_CONFIGFS_PHONET=y CONFIG_USB_CONFIGFS_MASS_STORAGE=y CONFIG_USB_CONFIGFS_F_LB_SS=y CONFIG_USB_CONFIGFS_F_FS=y @@ -340,6 +365,7 @@ CONFIG_USB_CONFIGFS_F_UAC2=y CONFIG_USB_CONFIGFS_F_MIDI=y CONFIG_USB_CONFIGFS_F_HID=y CONFIG_USB_ZERO=m +CONFIG_USB_G_NOKIA=m CONFIG_MMC=y CONFIG_SDIO_UART=y CONFIG_MMC_OMAP=y @@ -347,6 +373,7 @@ CONFIG_MMC_OMAP_HS=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m CONFIG_LEDS_GPIO=m +CONFIG_LEDS_PWM=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_ONESHOT=m @@ -366,6 +393,7 @@ CONFIG_TI_EDMA=y CONFIG_DMA_OMAP=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXTCON=m +CONFIG_EXTCON_GPIO=m CONFIG_EXTCON_PALMAS=m CONFIG_TI_EMIF=m CONFIG_PWM=y @@ -374,7 +402,8 @@ CONFIG_PWM_TIEHRPWM=m CONFIG_PWM_TWL=m CONFIG_PWM_TWL_LED=m CONFIG_OMAP_USB2=m -CONFIG_TI_PIPE3=m +CONFIG_TI_PIPE3=y +CONFIG_TWL4030_USB=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set @@ -387,6 +416,7 @@ CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y +CONFIG_CONFIGFS_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_FS_XATTR=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 8c7da3319d82..d2f2babfd47a 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -97,9 +97,9 @@ CONFIG_PINCTRL_APQ8084=y CONFIG_PINCTRL_IPQ8064=y CONFIG_PINCTRL_MSM8960=y CONFIG_PINCTRL_MSM8X74=y +CONFIG_GPIOLIB=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y -CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_MSM=y CONFIG_THERMAL=y @@ -125,7 +125,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_VBUS_DRAW=500 CONFIG_MMC=y -CONFIG_MMC_BLOCK_MINORS=16 +CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y @@ -134,14 +134,15 @@ CONFIG_RTC_CLASS=y CONFIG_DMADEVICES=y CONFIG_QCOM_BAM_DMA=y CONFIG_STAGING=y -CONFIG_QCOM_GSBI=y CONFIG_COMMON_CLK_QCOM=y CONFIG_APQ_MMCC_8084=y -CONFIG_IPQ_GCC_806X=y +CONFIG_IPQ_LCC_806X=y CONFIG_MSM_GCC_8660=y +CONFIG_MSM_LCC_8960=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y CONFIG_MSM_IOMMU=y +CONFIG_QCOM_GSBI=y CONFIG_PHY_QCOM_APQ8064_SATA=y CONFIG_PHY_QCOM_IPQ806X_SATA=y CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 41d856effe6c..510c747c65b4 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -3,8 +3,6 @@ CONFIG_SYSVIPC=y CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y CONFIG_SLAB=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index b17036088726..b58618e2d13c 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -12,7 +12,9 @@ CONFIG_SLAB=y CONFIG_ARCH_SHMOBILE_MULTI=y CONFIG_ARCH_EMEV2=y CONFIG_ARCH_R7S72100=y +CONFIG_ARCH_R8A73A4=y CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A7778=y CONFIG_ARCH_R8A7779=y CONFIG_ARCH_R8A7790=y CONFIG_ARCH_R8A7791=y @@ -92,7 +94,6 @@ CONFIG_INPUT_ADXL34X=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_EM=y CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=20 @@ -109,6 +110,9 @@ CONFIG_SPI_SH_HSPI=y CONFIG_GPIO_EM=y CONFIG_GPIO_RCAR=y CONFIG_GPIO_PCF857X=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_RMOBILE=y # CONFIG_HWMON is not set CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y @@ -121,6 +125,7 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_AS3711=y CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_MAX8973=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_CONTROLLER=y @@ -133,6 +138,7 @@ CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_RENESAS_VSP1=y # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_ADV7180=y +CONFIG_VIDEO_ML86V7667=y CONFIG_DRM=y CONFIG_DRM_RCAR_DU=y CONFIG_FB_SH_MOBILE_LCDC=y @@ -167,6 +173,7 @@ CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_RS5C372=y CONFIG_RTC_DRV_S35390A=y +CONFIG_RTC_DRV_RX8581=y CONFIG_DMADEVICES=y CONFIG_SH_DMAE=y CONFIG_RCAR_DMAC=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 38840a812924..8ecba00dcd83 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -4,6 +4,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_PERF_EVENTS=y CONFIG_ARCH_SUNXI=y CONFIG_SMP=y +CONFIG_NR_CPUS=8 CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_HIGHPTE=y @@ -106,6 +107,7 @@ CONFIG_RTC_DRV_SUN6I=y CONFIG_RTC_DRV_SUNXI=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_PHY_SUN4I_USB=y +CONFIG_PHY_SUN9I_USB=y CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig index f489fdaa19b8..37fe607a4ede 100644 --- a/arch/arm/configs/vexpress_defconfig +++ b/arch/arm/configs/vexpress_defconfig @@ -118,8 +118,8 @@ CONFIG_HID_ZEROPLUS=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y -CONFIG_USB_ISP1760_HCD=y CONFIG_USB_STORAGE=y +CONFIG_USB_ISP1760=y CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig new file mode 100644 index 000000000000..8da2207b0072 --- /dev/null +++ b/arch/arm/crypto/Kconfig @@ -0,0 +1,130 @@ + +menuconfig ARM_CRYPTO + bool "ARM Accelerated Cryptographic Algorithms" + depends on ARM + help + Say Y here to choose from a selection of cryptographic algorithms + implemented using ARM specific CPU features or instructions. + +if ARM_CRYPTO + +config CRYPTO_SHA1_ARM + tristate "SHA1 digest algorithm (ARM-asm)" + select CRYPTO_SHA1 + select CRYPTO_HASH + help + SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented + using optimized ARM assembler. + +config CRYPTO_SHA1_ARM_NEON + tristate "SHA1 digest algorithm (ARM NEON)" + depends on KERNEL_MODE_NEON + select CRYPTO_SHA1_ARM + select CRYPTO_SHA1 + select CRYPTO_HASH + help + SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented + using optimized ARM NEON assembly, when NEON instructions are + available. + +config CRYPTO_SHA1_ARM_CE + tristate "SHA1 digest algorithm (ARM v8 Crypto Extensions)" + depends on KERNEL_MODE_NEON + select CRYPTO_SHA1_ARM + select CRYPTO_HASH + help + SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented + using special ARMv8 Crypto Extensions. + +config CRYPTO_SHA2_ARM_CE + tristate "SHA-224/256 digest algorithm (ARM v8 Crypto Extensions)" + depends on KERNEL_MODE_NEON + select CRYPTO_SHA256_ARM + select CRYPTO_HASH + help + SHA-256 secure hash standard (DFIPS 180-2) implemented + using special ARMv8 Crypto Extensions. + +config CRYPTO_SHA256_ARM + tristate "SHA-224/256 digest algorithm (ARM-asm and NEON)" + select CRYPTO_HASH + depends on !CPU_V7M + help + SHA-256 secure hash standard (DFIPS 180-2) implemented + using optimized ARM assembler and NEON, when available. + +config CRYPTO_SHA512_ARM_NEON + tristate "SHA384 and SHA512 digest algorithm (ARM NEON)" + depends on KERNEL_MODE_NEON + select CRYPTO_SHA512 + select CRYPTO_HASH + help + SHA-512 secure hash standard (DFIPS 180-2) implemented + using ARM NEON instructions, when available. + + This version of SHA implements a 512 bit hash with 256 bits of + security against collision attacks. + + This code also includes SHA-384, a 384 bit hash with 192 bits + of security against collision attacks. + +config CRYPTO_AES_ARM + tristate "AES cipher algorithms (ARM-asm)" + depends on ARM + select CRYPTO_ALGAPI + select CRYPTO_AES + help + Use optimized AES assembler routines for ARM platforms. + + AES cipher algorithms (FIPS-197). AES uses the Rijndael + algorithm. + + Rijndael appears to be consistently a very good performer in + both hardware and software across a wide range of computing + environments regardless of its use in feedback or non-feedback + modes. Its key setup time is excellent, and its key agility is + good. Rijndael's very low memory requirements make it very well + suited for restricted-space environments, in which it also + demonstrates excellent performance. Rijndael's operations are + among the easiest to defend against power and timing attacks. + + The AES specifies three key sizes: 128, 192 and 256 bits + + See <http://csrc.nist.gov/encryption/aes/> for more information. + +config CRYPTO_AES_ARM_BS + tristate "Bit sliced AES using NEON instructions" + depends on KERNEL_MODE_NEON + select CRYPTO_ALGAPI + select CRYPTO_AES_ARM + select CRYPTO_ABLK_HELPER + help + Use a faster and more secure NEON based implementation of AES in CBC, + CTR and XTS modes + + Bit sliced AES gives around 45% speedup on Cortex-A15 for CTR mode + and for XTS mode encryption, CBC and XTS mode decryption speedup is + around 25%. (CBC encryption speed is not affected by this driver.) + This implementation does not rely on any lookup tables so it is + believed to be invulnerable to cache timing attacks. + +config CRYPTO_AES_ARM_CE + tristate "Accelerated AES using ARMv8 Crypto Extensions" + depends on KERNEL_MODE_NEON + select CRYPTO_ALGAPI + select CRYPTO_ABLK_HELPER + help + Use an implementation of AES in CBC, CTR and XTS modes that uses + ARMv8 Crypto Extensions + +config CRYPTO_GHASH_ARM_CE + tristate "PMULL-accelerated GHASH using ARMv8 Crypto Extensions" + depends on KERNEL_MODE_NEON + select CRYPTO_HASH + select CRYPTO_CRYPTD + help + Use an implementation of GHASH (used by the GCM AEAD chaining mode) + that uses the 64x64 to 128 bit polynomial multiplication (vmull.p64) + that is part of the ARMv8 Crypto Extensions + +endif diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile index b48fa341648d..6ea828241fcb 100644 --- a/arch/arm/crypto/Makefile +++ b/arch/arm/crypto/Makefile @@ -6,13 +6,35 @@ obj-$(CONFIG_CRYPTO_AES_ARM) += aes-arm.o obj-$(CONFIG_CRYPTO_AES_ARM_BS) += aes-arm-bs.o obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o +obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o obj-$(CONFIG_CRYPTO_SHA512_ARM_NEON) += sha512-arm-neon.o +ce-obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o +ce-obj-$(CONFIG_CRYPTO_SHA1_ARM_CE) += sha1-arm-ce.o +ce-obj-$(CONFIG_CRYPTO_SHA2_ARM_CE) += sha2-arm-ce.o +ce-obj-$(CONFIG_CRYPTO_GHASH_ARM_CE) += ghash-arm-ce.o + +ifneq ($(ce-obj-y)$(ce-obj-m),) +ifeq ($(call as-instr,.fpu crypto-neon-fp-armv8,y,n),y) +obj-y += $(ce-obj-y) +obj-m += $(ce-obj-m) +else +$(warning These ARMv8 Crypto Extensions modules need binutils 2.23 or higher) +$(warning $(ce-obj-y) $(ce-obj-m)) +endif +endif + aes-arm-y := aes-armv4.o aes_glue.o aes-arm-bs-y := aesbs-core.o aesbs-glue.o sha1-arm-y := sha1-armv4-large.o sha1_glue.o sha1-arm-neon-y := sha1-armv7-neon.o sha1_neon_glue.o +sha256-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha256_neon_glue.o +sha256-arm-y := sha256-core.o sha256_glue.o $(sha256-arm-neon-y) sha512-arm-neon-y := sha512-armv7-neon.o sha512_neon_glue.o +sha1-arm-ce-y := sha1-ce-core.o sha1-ce-glue.o +sha2-arm-ce-y := sha2-ce-core.o sha2-ce-glue.o +aes-arm-ce-y := aes-ce-core.o aes-ce-glue.o +ghash-arm-ce-y := ghash-ce-core.o ghash-ce-glue.o quiet_cmd_perl = PERL $@ cmd_perl = $(PERL) $(<) > $(@) @@ -20,4 +42,7 @@ quiet_cmd_perl = PERL $@ $(src)/aesbs-core.S_shipped: $(src)/bsaes-armv7.pl $(call cmd,perl) -.PRECIOUS: $(obj)/aesbs-core.S +$(src)/sha256-core.S_shipped: $(src)/sha256-armv4.pl + $(call cmd,perl) + +.PRECIOUS: $(obj)/aesbs-core.S $(obj)/sha256-core.S diff --git a/arch/arm/crypto/aes-ce-core.S b/arch/arm/crypto/aes-ce-core.S new file mode 100644 index 000000000000..8cfa468ee570 --- /dev/null +++ b/arch/arm/crypto/aes-ce-core.S @@ -0,0 +1,518 @@ +/* + * aes-ce-core.S - AES in CBC/CTR/XTS mode using ARMv8 Crypto Extensions + * + * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + + .text + .fpu crypto-neon-fp-armv8 + .align 3 + + .macro enc_round, state, key + aese.8 \state, \key + aesmc.8 \state, \state + .endm + + .macro dec_round, state, key + aesd.8 \state, \key + aesimc.8 \state, \state + .endm + + .macro enc_dround, key1, key2 + enc_round q0, \key1 + enc_round q0, \key2 + .endm + + .macro dec_dround, key1, key2 + dec_round q0, \key1 + dec_round q0, \key2 + .endm + + .macro enc_fround, key1, key2, key3 + enc_round q0, \key1 + aese.8 q0, \key2 + veor q0, q0, \key3 + .endm + + .macro dec_fround, key1, key2, key3 + dec_round q0, \key1 + aesd.8 q0, \key2 + veor q0, q0, \key3 + .endm + + .macro enc_dround_3x, key1, key2 + enc_round q0, \key1 + enc_round q1, \key1 + enc_round q2, \key1 + enc_round q0, \key2 + enc_round q1, \key2 + enc_round q2, \key2 + .endm + + .macro dec_dround_3x, key1, key2 + dec_round q0, \key1 + dec_round q1, \key1 + dec_round q2, \key1 + dec_round q0, \key2 + dec_round q1, \key2 + dec_round q2, \key2 + .endm + + .macro enc_fround_3x, key1, key2, key3 + enc_round q0, \key1 + enc_round q1, \key1 + enc_round q2, \key1 + aese.8 q0, \key2 + aese.8 q1, \key2 + aese.8 q2, \key2 + veor q0, q0, \key3 + veor q1, q1, \key3 + veor q2, q2, \key3 + .endm + + .macro dec_fround_3x, key1, key2, key3 + dec_round q0, \key1 + dec_round q1, \key1 + dec_round q2, \key1 + aesd.8 q0, \key2 + aesd.8 q1, \key2 + aesd.8 q2, \key2 + veor q0, q0, \key3 + veor q1, q1, \key3 + veor q2, q2, \key3 + .endm + + .macro do_block, dround, fround + cmp r3, #12 @ which key size? + vld1.8 {q10-q11}, [ip]! + \dround q8, q9 + vld1.8 {q12-q13}, [ip]! + \dround q10, q11 + vld1.8 {q10-q11}, [ip]! + \dround q12, q13 + vld1.8 {q12-q13}, [ip]! + \dround q10, q11 + blo 0f @ AES-128: 10 rounds + vld1.8 {q10-q11}, [ip]! + beq 1f @ AES-192: 12 rounds + \dround q12, q13 + vld1.8 {q12-q13}, [ip] + \dround q10, q11 +0: \fround q12, q13, q14 + bx lr + +1: \dround q12, q13 + \fround q10, q11, q14 + bx lr + .endm + + /* + * Internal, non-AAPCS compliant functions that implement the core AES + * transforms. These should preserve all registers except q0 - q2 and ip + * Arguments: + * q0 : first in/output block + * q1 : second in/output block (_3x version only) + * q2 : third in/output block (_3x version only) + * q8 : first round key + * q9 : secound round key + * ip : address of 3rd round key + * q14 : final round key + * r3 : number of rounds + */ + .align 6 +aes_encrypt: + add ip, r2, #32 @ 3rd round key +.Laes_encrypt_tweak: + do_block enc_dround, enc_fround +ENDPROC(aes_encrypt) + + .align 6 +aes_decrypt: + add ip, r2, #32 @ 3rd round key + do_block dec_dround, dec_fround +ENDPROC(aes_decrypt) + + .align 6 +aes_encrypt_3x: + add ip, r2, #32 @ 3rd round key + do_block enc_dround_3x, enc_fround_3x +ENDPROC(aes_encrypt_3x) + + .align 6 +aes_decrypt_3x: + add ip, r2, #32 @ 3rd round key + do_block dec_dround_3x, dec_fround_3x +ENDPROC(aes_decrypt_3x) + + .macro prepare_key, rk, rounds + add ip, \rk, \rounds, lsl #4 + vld1.8 {q8-q9}, [\rk] @ load first 2 round keys + vld1.8 {q14}, [ip] @ load last round key + .endm + + /* + * aes_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks) + * aes_ecb_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks) + */ +ENTRY(ce_aes_ecb_encrypt) + push {r4, lr} + ldr r4, [sp, #8] + prepare_key r2, r3 +.Lecbencloop3x: + subs r4, r4, #3 + bmi .Lecbenc1x + vld1.8 {q0-q1}, [r1, :64]! + vld1.8 {q2}, [r1, :64]! + bl aes_encrypt_3x + vst1.8 {q0-q1}, [r0, :64]! + vst1.8 {q2}, [r0, :64]! + b .Lecbencloop3x +.Lecbenc1x: + adds r4, r4, #3 + beq .Lecbencout +.Lecbencloop: + vld1.8 {q0}, [r1, :64]! + bl aes_encrypt + vst1.8 {q0}, [r0, :64]! + subs r4, r4, #1 + bne .Lecbencloop +.Lecbencout: + pop {r4, pc} +ENDPROC(ce_aes_ecb_encrypt) + +ENTRY(ce_aes_ecb_decrypt) + push {r4, lr} + ldr r4, [sp, #8] + prepare_key r2, r3 +.Lecbdecloop3x: + subs r4, r4, #3 + bmi .Lecbdec1x + vld1.8 {q0-q1}, [r1, :64]! + vld1.8 {q2}, [r1, :64]! + bl aes_decrypt_3x + vst1.8 {q0-q1}, [r0, :64]! + vst1.8 {q2}, [r0, :64]! + b .Lecbdecloop3x +.Lecbdec1x: + adds r4, r4, #3 + beq .Lecbdecout +.Lecbdecloop: + vld1.8 {q0}, [r1, :64]! + bl aes_decrypt + vst1.8 {q0}, [r0, :64]! + subs r4, r4, #1 + bne .Lecbdecloop +.Lecbdecout: + pop {r4, pc} +ENDPROC(ce_aes_ecb_decrypt) + + /* + * aes_cbc_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks, u8 iv[]) + * aes_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks, u8 iv[]) + */ +ENTRY(ce_aes_cbc_encrypt) + push {r4-r6, lr} + ldrd r4, r5, [sp, #16] + vld1.8 {q0}, [r5] + prepare_key r2, r3 +.Lcbcencloop: + vld1.8 {q1}, [r1, :64]! @ get next pt block + veor q0, q0, q1 @ ..and xor with iv + bl aes_encrypt + vst1.8 {q0}, [r0, :64]! + subs r4, r4, #1 + bne .Lcbcencloop + vst1.8 {q0}, [r5] + pop {r4-r6, pc} +ENDPROC(ce_aes_cbc_encrypt) + +ENTRY(ce_aes_cbc_decrypt) + push {r4-r6, lr} + ldrd r4, r5, [sp, #16] + vld1.8 {q6}, [r5] @ keep iv in q6 + prepare_key r2, r3 +.Lcbcdecloop3x: + subs r4, r4, #3 + bmi .Lcbcdec1x + vld1.8 {q0-q1}, [r1, :64]! + vld1.8 {q2}, [r1, :64]! + vmov q3, q0 + vmov q4, q1 + vmov q5, q2 + bl aes_decrypt_3x + veor q0, q0, q6 + veor q1, q1, q3 + veor q2, q2, q4 + vmov q6, q5 + vst1.8 {q0-q1}, [r0, :64]! + vst1.8 {q2}, [r0, :64]! + b .Lcbcdecloop3x +.Lcbcdec1x: + adds r4, r4, #3 + beq .Lcbcdecout + vmov q15, q14 @ preserve last round key +.Lcbcdecloop: + vld1.8 {q0}, [r1, :64]! @ get next ct block + veor q14, q15, q6 @ combine prev ct with last key + vmov q6, q0 + bl aes_decrypt + vst1.8 {q0}, [r0, :64]! + subs r4, r4, #1 + bne .Lcbcdecloop +.Lcbcdecout: + vst1.8 {q6}, [r5] @ keep iv in q6 + pop {r4-r6, pc} +ENDPROC(ce_aes_cbc_decrypt) + + /* + * aes_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks, u8 ctr[]) + */ +ENTRY(ce_aes_ctr_encrypt) + push {r4-r6, lr} + ldrd r4, r5, [sp, #16] + vld1.8 {q6}, [r5] @ load ctr + prepare_key r2, r3 + vmov r6, s27 @ keep swabbed ctr in r6 + rev r6, r6 + cmn r6, r4 @ 32 bit overflow? + bcs .Lctrloop +.Lctrloop3x: + subs r4, r4, #3 + bmi .Lctr1x + add r6, r6, #1 + vmov q0, q6 + vmov q1, q6 + rev ip, r6 + add r6, r6, #1 + vmov q2, q6 + vmov s7, ip + rev ip, r6 + add r6, r6, #1 + vmov s11, ip + vld1.8 {q3-q4}, [r1, :64]! + vld1.8 {q5}, [r1, :64]! + bl aes_encrypt_3x + veor q0, q0, q3 + veor q1, q1, q4 + veor q2, q2, q5 + rev ip, r6 + vst1.8 {q0-q1}, [r0, :64]! + vst1.8 {q2}, [r0, :64]! + vmov s27, ip + b .Lctrloop3x +.Lctr1x: + adds r4, r4, #3 + beq .Lctrout +.Lctrloop: + vmov q0, q6 + bl aes_encrypt + subs r4, r4, #1 + bmi .Lctrhalfblock @ blocks < 0 means 1/2 block + vld1.8 {q3}, [r1, :64]! + veor q3, q0, q3 + vst1.8 {q3}, [r0, :64]! + + adds r6, r6, #1 @ increment BE ctr + rev ip, r6 + vmov s27, ip + bcs .Lctrcarry + teq r4, #0 + bne .Lctrloop +.Lctrout: + vst1.8 {q6}, [r5] + pop {r4-r6, pc} + +.Lctrhalfblock: + vld1.8 {d1}, [r1, :64] + veor d0, d0, d1 + vst1.8 {d0}, [r0, :64] + pop {r4-r6, pc} + +.Lctrcarry: + .irp sreg, s26, s25, s24 + vmov ip, \sreg @ load next word of ctr + rev ip, ip @ ... to handle the carry + adds ip, ip, #1 + rev ip, ip + vmov \sreg, ip + bcc 0f + .endr +0: teq r4, #0 + beq .Lctrout + b .Lctrloop +ENDPROC(ce_aes_ctr_encrypt) + + /* + * aes_xts_encrypt(u8 out[], u8 const in[], u8 const rk1[], int rounds, + * int blocks, u8 iv[], u8 const rk2[], int first) + * aes_xts_decrypt(u8 out[], u8 const in[], u8 const rk1[], int rounds, + * int blocks, u8 iv[], u8 const rk2[], int first) + */ + + .macro next_tweak, out, in, const, tmp + vshr.s64 \tmp, \in, #63 + vand \tmp, \tmp, \const + vadd.u64 \out, \in, \in + vext.8 \tmp, \tmp, \tmp, #8 + veor \out, \out, \tmp + .endm + + .align 3 +.Lxts_mul_x: + .quad 1, 0x87 + +ce_aes_xts_init: + vldr d14, .Lxts_mul_x + vldr d15, .Lxts_mul_x + 8 + + ldrd r4, r5, [sp, #16] @ load args + ldr r6, [sp, #28] + vld1.8 {q0}, [r5] @ load iv + teq r6, #1 @ start of a block? + bxne lr + + @ Encrypt the IV in q0 with the second AES key. This should only + @ be done at the start of a block. + ldr r6, [sp, #24] @ load AES key 2 + prepare_key r6, r3 + add ip, r6, #32 @ 3rd round key of key 2 + b .Laes_encrypt_tweak @ tail call +ENDPROC(ce_aes_xts_init) + +ENTRY(ce_aes_xts_encrypt) + push {r4-r6, lr} + + bl ce_aes_xts_init @ run shared prologue + prepare_key r2, r3 + vmov q3, q0 + + teq r6, #0 @ start of a block? + bne .Lxtsenc3x + +.Lxtsencloop3x: + next_tweak q3, q3, q7, q6 +.Lxtsenc3x: + subs r4, r4, #3 + bmi .Lxtsenc1x + vld1.8 {q0-q1}, [r1, :64]! @ get 3 pt blocks + vld1.8 {q2}, [r1, :64]! + next_tweak q4, q3, q7, q6 + veor q0, q0, q3 + next_tweak q5, q4, q7, q6 + veor q1, q1, q4 + veor q2, q2, q5 + bl aes_encrypt_3x + veor q0, q0, q3 + veor q1, q1, q4 + veor q2, q2, q5 + vst1.8 {q0-q1}, [r0, :64]! @ write 3 ct blocks + vst1.8 {q2}, [r0, :64]! + vmov q3, q5 + teq r4, #0 + beq .Lxtsencout + b .Lxtsencloop3x +.Lxtsenc1x: + adds r4, r4, #3 + beq .Lxtsencout +.Lxtsencloop: + vld1.8 {q0}, [r1, :64]! + veor q0, q0, q3 + bl aes_encrypt + veor q0, q0, q3 + vst1.8 {q0}, [r0, :64]! + subs r4, r4, #1 + beq .Lxtsencout + next_tweak q3, q3, q7, q6 + b .Lxtsencloop +.Lxtsencout: + vst1.8 {q3}, [r5] + pop {r4-r6, pc} +ENDPROC(ce_aes_xts_encrypt) + + +ENTRY(ce_aes_xts_decrypt) + push {r4-r6, lr} + + bl ce_aes_xts_init @ run shared prologue + prepare_key r2, r3 + vmov q3, q0 + + teq r6, #0 @ start of a block? + bne .Lxtsdec3x + +.Lxtsdecloop3x: + next_tweak q3, q3, q7, q6 +.Lxtsdec3x: + subs r4, r4, #3 + bmi .Lxtsdec1x + vld1.8 {q0-q1}, [r1, :64]! @ get 3 ct blocks + vld1.8 {q2}, [r1, :64]! + next_tweak q4, q3, q7, q6 + veor q0, q0, q3 + next_tweak q5, q4, q7, q6 + veor q1, q1, q4 + veor q2, q2, q5 + bl aes_decrypt_3x + veor q0, q0, q3 + veor q1, q1, q4 + veor q2, q2, q5 + vst1.8 {q0-q1}, [r0, :64]! @ write 3 pt blocks + vst1.8 {q2}, [r0, :64]! + vmov q3, q5 + teq r4, #0 + beq .Lxtsdecout + b .Lxtsdecloop3x +.Lxtsdec1x: + adds r4, r4, #3 + beq .Lxtsdecout +.Lxtsdecloop: + vld1.8 {q0}, [r1, :64]! + veor q0, q0, q3 + add ip, r2, #32 @ 3rd round key + bl aes_decrypt + veor q0, q0, q3 + vst1.8 {q0}, [r0, :64]! + subs r4, r4, #1 + beq .Lxtsdecout + next_tweak q3, q3, q7, q6 + b .Lxtsdecloop +.Lxtsdecout: + vst1.8 {q3}, [r5] + pop {r4-r6, pc} +ENDPROC(ce_aes_xts_decrypt) + + /* + * u32 ce_aes_sub(u32 input) - use the aese instruction to perform the + * AES sbox substitution on each byte in + * 'input' + */ +ENTRY(ce_aes_sub) + vdup.32 q1, r0 + veor q0, q0, q0 + aese.8 q0, q1 + vmov r0, s0 + bx lr +ENDPROC(ce_aes_sub) + + /* + * void ce_aes_invert(u8 *dst, u8 *src) - perform the Inverse MixColumns + * operation on round key *src + */ +ENTRY(ce_aes_invert) + vld1.8 {q0}, [r1] + aesimc.8 q0, q0 + vst1.8 {q0}, [r0] + bx lr +ENDPROC(ce_aes_invert) diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c new file mode 100644 index 000000000000..b445a5d56f43 --- /dev/null +++ b/arch/arm/crypto/aes-ce-glue.c @@ -0,0 +1,524 @@ +/* + * aes-ce-glue.c - wrapper code for ARMv8 AES + * + * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <asm/hwcap.h> +#include <asm/neon.h> +#include <asm/hwcap.h> +#include <crypto/aes.h> +#include <crypto/ablk_helper.h> +#include <crypto/algapi.h> +#include <linux/module.h> + +MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions"); +MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); +MODULE_LICENSE("GPL v2"); + +/* defined in aes-ce-core.S */ +asmlinkage u32 ce_aes_sub(u32 input); +asmlinkage void ce_aes_invert(void *dst, void *src); + +asmlinkage void ce_aes_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks); +asmlinkage void ce_aes_ecb_decrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks); + +asmlinkage void ce_aes_cbc_encrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks, u8 iv[]); +asmlinkage void ce_aes_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks, u8 iv[]); + +asmlinkage void ce_aes_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks, u8 ctr[]); + +asmlinkage void ce_aes_xts_encrypt(u8 out[], u8 const in[], u8 const rk1[], + int rounds, int blocks, u8 iv[], + u8 const rk2[], int first); +asmlinkage void ce_aes_xts_decrypt(u8 out[], u8 const in[], u8 const rk1[], + int rounds, int blocks, u8 iv[], + u8 const rk2[], int first); + +struct aes_block { + u8 b[AES_BLOCK_SIZE]; +}; + +static int num_rounds(struct crypto_aes_ctx *ctx) +{ + /* + * # of rounds specified by AES: + * 128 bit key 10 rounds + * 192 bit key 12 rounds + * 256 bit key 14 rounds + * => n byte key => 6 + (n/4) rounds + */ + return 6 + ctx->key_length / 4; +} + +static int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key, + unsigned int key_len) +{ + /* + * The AES key schedule round constants + */ + static u8 const rcon[] = { + 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b, 0x36, + }; + + u32 kwords = key_len / sizeof(u32); + struct aes_block *key_enc, *key_dec; + int i, j; + + if (key_len != AES_KEYSIZE_128 && + key_len != AES_KEYSIZE_192 && + key_len != AES_KEYSIZE_256) + return -EINVAL; + + memcpy(ctx->key_enc, in_key, key_len); + ctx->key_length = key_len; + + kernel_neon_begin(); + for (i = 0; i < sizeof(rcon); i++) { + u32 *rki = ctx->key_enc + (i * kwords); + u32 *rko = rki + kwords; + + rko[0] = ror32(ce_aes_sub(rki[kwords - 1]), 8); + rko[0] = rko[0] ^ rki[0] ^ rcon[i]; + rko[1] = rko[0] ^ rki[1]; + rko[2] = rko[1] ^ rki[2]; + rko[3] = rko[2] ^ rki[3]; + + if (key_len == AES_KEYSIZE_192) { + if (i >= 7) + break; + rko[4] = rko[3] ^ rki[4]; + rko[5] = rko[4] ^ rki[5]; + } else if (key_len == AES_KEYSIZE_256) { + if (i >= 6) + break; + rko[4] = ce_aes_sub(rko[3]) ^ rki[4]; + rko[5] = rko[4] ^ rki[5]; + rko[6] = rko[5] ^ rki[6]; + rko[7] = rko[6] ^ rki[7]; + } + } + + /* + * Generate the decryption keys for the Equivalent Inverse Cipher. + * This involves reversing the order of the round keys, and applying + * the Inverse Mix Columns transformation on all but the first and + * the last one. + */ + key_enc = (struct aes_block *)ctx->key_enc; + key_dec = (struct aes_block *)ctx->key_dec; + j = num_rounds(ctx); + + key_dec[0] = key_enc[j]; + for (i = 1, j--; j > 0; i++, j--) + ce_aes_invert(key_dec + i, key_enc + j); + key_dec[i] = key_enc[0]; + + kernel_neon_end(); + return 0; +} + +static int ce_aes_setkey(struct crypto_tfm *tfm, const u8 *in_key, + unsigned int key_len) +{ + struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm); + int ret; + + ret = ce_aes_expandkey(ctx, in_key, key_len); + if (!ret) + return 0; + + tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; +} + +struct crypto_aes_xts_ctx { + struct crypto_aes_ctx key1; + struct crypto_aes_ctx __aligned(8) key2; +}; + +static int xts_set_key(struct crypto_tfm *tfm, const u8 *in_key, + unsigned int key_len) +{ + struct crypto_aes_xts_ctx *ctx = crypto_tfm_ctx(tfm); + int ret; + + ret = ce_aes_expandkey(&ctx->key1, in_key, key_len / 2); + if (!ret) + ret = ce_aes_expandkey(&ctx->key2, &in_key[key_len / 2], + key_len / 2); + if (!ret) + return 0; + + tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; +} + +static int ecb_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + struct blkcipher_walk walk; + unsigned int blocks; + int err; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_neon_begin(); + while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { + ce_aes_ecb_encrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key_enc, num_rounds(ctx), blocks); + err = blkcipher_walk_done(desc, &walk, + walk.nbytes % AES_BLOCK_SIZE); + } + kernel_neon_end(); + return err; +} + +static int ecb_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + struct blkcipher_walk walk; + unsigned int blocks; + int err; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_neon_begin(); + while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { + ce_aes_ecb_decrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key_dec, num_rounds(ctx), blocks); + err = blkcipher_walk_done(desc, &walk, + walk.nbytes % AES_BLOCK_SIZE); + } + kernel_neon_end(); + return err; +} + +static int cbc_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + struct blkcipher_walk walk; + unsigned int blocks; + int err; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_neon_begin(); + while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { + ce_aes_cbc_encrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key_enc, num_rounds(ctx), blocks, + walk.iv); + err = blkcipher_walk_done(desc, &walk, + walk.nbytes % AES_BLOCK_SIZE); + } + kernel_neon_end(); + return err; +} + +static int cbc_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + struct blkcipher_walk walk; + unsigned int blocks; + int err; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_neon_begin(); + while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { + ce_aes_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key_dec, num_rounds(ctx), blocks, + walk.iv); + err = blkcipher_walk_done(desc, &walk, + walk.nbytes % AES_BLOCK_SIZE); + } + kernel_neon_end(); + return err; +} + +static int ctr_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + struct blkcipher_walk walk; + int err, blocks; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt_block(desc, &walk, AES_BLOCK_SIZE); + + kernel_neon_begin(); + while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { + ce_aes_ctr_encrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key_enc, num_rounds(ctx), blocks, + walk.iv); + nbytes -= blocks * AES_BLOCK_SIZE; + if (nbytes && nbytes == walk.nbytes % AES_BLOCK_SIZE) + break; + err = blkcipher_walk_done(desc, &walk, + walk.nbytes % AES_BLOCK_SIZE); + } + if (nbytes) { + u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE; + u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE; + u8 __aligned(8) tail[AES_BLOCK_SIZE]; + + /* + * Minimum alignment is 8 bytes, so if nbytes is <= 8, we need + * to tell aes_ctr_encrypt() to only read half a block. + */ + blocks = (nbytes <= 8) ? -1 : 1; + + ce_aes_ctr_encrypt(tail, tsrc, (u8 *)ctx->key_enc, + num_rounds(ctx), blocks, walk.iv); + memcpy(tdst, tail, nbytes); + err = blkcipher_walk_done(desc, &walk, 0); + } + kernel_neon_end(); + + return err; +} + +static int xts_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + int err, first, rounds = num_rounds(&ctx->key1); + struct blkcipher_walk walk; + unsigned int blocks; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_neon_begin(); + for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) { + ce_aes_xts_encrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key1.key_enc, rounds, blocks, + walk.iv, (u8 *)ctx->key2.key_enc, first); + err = blkcipher_walk_done(desc, &walk, + walk.nbytes % AES_BLOCK_SIZE); + } + kernel_neon_end(); + + return err; +} + +static int xts_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + int err, first, rounds = num_rounds(&ctx->key1); + struct blkcipher_walk walk; + unsigned int blocks; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_neon_begin(); + for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) { + ce_aes_xts_decrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key1.key_dec, rounds, blocks, + walk.iv, (u8 *)ctx->key2.key_enc, first); + err = blkcipher_walk_done(desc, &walk, + walk.nbytes % AES_BLOCK_SIZE); + } + kernel_neon_end(); + + return err; +} + +static struct crypto_alg aes_algs[] = { { + .cra_name = "__ecb-aes-ce", + .cra_driver_name = "__driver-ecb-aes-ce", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | + CRYPTO_ALG_INTERNAL, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_blkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ce_aes_setkey, + .encrypt = ecb_encrypt, + .decrypt = ecb_decrypt, + }, +}, { + .cra_name = "__cbc-aes-ce", + .cra_driver_name = "__driver-cbc-aes-ce", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | + CRYPTO_ALG_INTERNAL, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_blkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ce_aes_setkey, + .encrypt = cbc_encrypt, + .decrypt = cbc_decrypt, + }, +}, { + .cra_name = "__ctr-aes-ce", + .cra_driver_name = "__driver-ctr-aes-ce", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | + CRYPTO_ALG_INTERNAL, + .cra_blocksize = 1, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_blkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ce_aes_setkey, + .encrypt = ctr_encrypt, + .decrypt = ctr_encrypt, + }, +}, { + .cra_name = "__xts-aes-ce", + .cra_driver_name = "__driver-xts-aes-ce", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | + CRYPTO_ALG_INTERNAL, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_xts_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_blkcipher = { + .min_keysize = 2 * AES_MIN_KEY_SIZE, + .max_keysize = 2 * AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = xts_set_key, + .encrypt = xts_encrypt, + .decrypt = xts_decrypt, + }, +}, { + .cra_name = "ecb(aes)", + .cra_driver_name = "ecb-aes-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct async_helper_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_init = ablk_init, + .cra_exit = ablk_exit, + .cra_ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + } +}, { + .cra_name = "cbc(aes)", + .cra_driver_name = "cbc-aes-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct async_helper_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_init = ablk_init, + .cra_exit = ablk_exit, + .cra_ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + } +}, { + .cra_name = "ctr(aes)", + .cra_driver_name = "ctr-aes-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, + .cra_blocksize = 1, + .cra_ctxsize = sizeof(struct async_helper_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_init = ablk_init, + .cra_exit = ablk_exit, + .cra_ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + } +}, { + .cra_name = "xts(aes)", + .cra_driver_name = "xts-aes-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct async_helper_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_init = ablk_init, + .cra_exit = ablk_exit, + .cra_ablkcipher = { + .min_keysize = 2 * AES_MIN_KEY_SIZE, + .max_keysize = 2 * AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + } +} }; + +static int __init aes_init(void) +{ + if (!(elf_hwcap2 & HWCAP2_AES)) + return -ENODEV; + return crypto_register_algs(aes_algs, ARRAY_SIZE(aes_algs)); +} + +static void __exit aes_exit(void) +{ + crypto_unregister_algs(aes_algs, ARRAY_SIZE(aes_algs)); +} + +module_init(aes_init); +module_exit(aes_exit); diff --git a/arch/arm/crypto/aesbs-core.S_shipped b/arch/arm/crypto/aesbs-core.S_shipped index 71e5fc7cfb18..1d1800f71c5b 100644 --- a/arch/arm/crypto/aesbs-core.S_shipped +++ b/arch/arm/crypto/aesbs-core.S_shipped @@ -58,14 +58,18 @@ # define VFP_ABI_FRAME 0 # define BSAES_ASM_EXTENDED_KEY # define XTS_CHAIN_TWEAK -# define __ARM_ARCH__ 7 +# define __ARM_ARCH__ __LINUX_ARM_ARCH__ +# define __ARM_MAX_ARCH__ 7 #endif #ifdef __thumb__ # define adrl adr #endif -#if __ARM_ARCH__>=7 +#if __ARM_MAX_ARCH__>=7 +.arch armv7-a +.fpu neon + .text .syntax unified @ ARMv7-capable assembler is expected to handle this #ifdef __thumb2__ @@ -74,8 +78,6 @@ .code 32 #endif -.fpu neon - .type _bsaes_decrypt8,%function .align 4 _bsaes_decrypt8: @@ -2095,9 +2097,11 @@ bsaes_xts_decrypt: vld1.8 {q8}, [r0] @ initial tweak adr r2, .Lxts_magic +#ifndef XTS_CHAIN_TWEAK tst r9, #0xf @ if not multiple of 16 it ne @ Thumb2 thing, sanity check in ARM subne r9, #0x10 @ subtract another 16 bytes +#endif subs r9, #0x80 blo .Lxts_dec_short diff --git a/arch/arm/crypto/aesbs-glue.c b/arch/arm/crypto/aesbs-glue.c index 15468fbbdea3..6d685298690e 100644 --- a/arch/arm/crypto/aesbs-glue.c +++ b/arch/arm/crypto/aesbs-glue.c @@ -301,7 +301,8 @@ static struct crypto_alg aesbs_algs[] = { { .cra_name = "__cbc-aes-neonbs", .cra_driver_name = "__driver-cbc-aes-neonbs", .cra_priority = 0, - .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | + CRYPTO_ALG_INTERNAL, .cra_blocksize = AES_BLOCK_SIZE, .cra_ctxsize = sizeof(struct aesbs_cbc_ctx), .cra_alignmask = 7, @@ -319,7 +320,8 @@ static struct crypto_alg aesbs_algs[] = { { .cra_name = "__ctr-aes-neonbs", .cra_driver_name = "__driver-ctr-aes-neonbs", .cra_priority = 0, - .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | + CRYPTO_ALG_INTERNAL, .cra_blocksize = 1, .cra_ctxsize = sizeof(struct aesbs_ctr_ctx), .cra_alignmask = 7, @@ -337,7 +339,8 @@ static struct crypto_alg aesbs_algs[] = { { .cra_name = "__xts-aes-neonbs", .cra_driver_name = "__driver-xts-aes-neonbs", .cra_priority = 0, - .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | + CRYPTO_ALG_INTERNAL, .cra_blocksize = AES_BLOCK_SIZE, .cra_ctxsize = sizeof(struct aesbs_xts_ctx), .cra_alignmask = 7, diff --git a/arch/arm/crypto/bsaes-armv7.pl b/arch/arm/crypto/bsaes-armv7.pl index be068db960ee..a4d3856e7d24 100644 --- a/arch/arm/crypto/bsaes-armv7.pl +++ b/arch/arm/crypto/bsaes-armv7.pl @@ -701,14 +701,18 @@ $code.=<<___; # define VFP_ABI_FRAME 0 # define BSAES_ASM_EXTENDED_KEY # define XTS_CHAIN_TWEAK -# define __ARM_ARCH__ 7 +# define __ARM_ARCH__ __LINUX_ARM_ARCH__ +# define __ARM_MAX_ARCH__ 7 #endif #ifdef __thumb__ # define adrl adr #endif -#if __ARM_ARCH__>=7 +#if __ARM_MAX_ARCH__>=7 +.arch armv7-a +.fpu neon + .text .syntax unified @ ARMv7-capable assembler is expected to handle this #ifdef __thumb2__ @@ -717,8 +721,6 @@ $code.=<<___; .code 32 #endif -.fpu neon - .type _bsaes_decrypt8,%function .align 4 _bsaes_decrypt8: @@ -2076,9 +2078,11 @@ bsaes_xts_decrypt: vld1.8 {@XMM[8]}, [r0] @ initial tweak adr $magic, .Lxts_magic +#ifndef XTS_CHAIN_TWEAK tst $len, #0xf @ if not multiple of 16 it ne @ Thumb2 thing, sanity check in ARM subne $len, #0x10 @ subtract another 16 bytes +#endif subs $len, #0x80 blo .Lxts_dec_short diff --git a/arch/arm/crypto/ghash-ce-core.S b/arch/arm/crypto/ghash-ce-core.S new file mode 100644 index 000000000000..f6ab8bcc9efe --- /dev/null +++ b/arch/arm/crypto/ghash-ce-core.S @@ -0,0 +1,94 @@ +/* + * Accelerated GHASH implementation with ARMv8 vmull.p64 instructions. + * + * Copyright (C) 2015 Linaro Ltd. <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + + SHASH .req q0 + SHASH2 .req q1 + T1 .req q2 + T2 .req q3 + MASK .req q4 + XL .req q5 + XM .req q6 + XH .req q7 + IN1 .req q7 + + SHASH_L .req d0 + SHASH_H .req d1 + SHASH2_L .req d2 + T1_L .req d4 + MASK_L .req d8 + XL_L .req d10 + XL_H .req d11 + XM_L .req d12 + XM_H .req d13 + XH_L .req d14 + + .text + .fpu crypto-neon-fp-armv8 + + /* + * void pmull_ghash_update(int blocks, u64 dg[], const char *src, + * struct ghash_key const *k, const char *head) + */ +ENTRY(pmull_ghash_update) + vld1.64 {SHASH}, [r3] + vld1.64 {XL}, [r1] + vmov.i8 MASK, #0xe1 + vext.8 SHASH2, SHASH, SHASH, #8 + vshl.u64 MASK, MASK, #57 + veor SHASH2, SHASH2, SHASH + + /* do the head block first, if supplied */ + ldr ip, [sp] + teq ip, #0 + beq 0f + vld1.64 {T1}, [ip] + teq r0, #0 + b 1f + +0: vld1.64 {T1}, [r2]! + subs r0, r0, #1 + +1: /* multiply XL by SHASH in GF(2^128) */ +#ifndef CONFIG_CPU_BIG_ENDIAN + vrev64.8 T1, T1 +#endif + vext.8 T2, XL, XL, #8 + vext.8 IN1, T1, T1, #8 + veor T1, T1, T2 + veor XL, XL, IN1 + + vmull.p64 XH, SHASH_H, XL_H @ a1 * b1 + veor T1, T1, XL + vmull.p64 XL, SHASH_L, XL_L @ a0 * b0 + vmull.p64 XM, SHASH2_L, T1_L @ (a1 + a0)(b1 + b0) + + vext.8 T1, XL, XH, #8 + veor T2, XL, XH + veor XM, XM, T1 + veor XM, XM, T2 + vmull.p64 T2, XL_L, MASK_L + + vmov XH_L, XM_H + vmov XM_H, XL_L + + veor XL, XM, T2 + vext.8 T2, XL, XL, #8 + vmull.p64 XL, XL_L, MASK_L + veor T2, T2, XH + veor XL, XL, T2 + + bne 0b + + vst1.64 {XL}, [r1] + bx lr +ENDPROC(pmull_ghash_update) diff --git a/arch/arm/crypto/ghash-ce-glue.c b/arch/arm/crypto/ghash-ce-glue.c new file mode 100644 index 000000000000..03a39fe29246 --- /dev/null +++ b/arch/arm/crypto/ghash-ce-glue.c @@ -0,0 +1,320 @@ +/* + * Accelerated GHASH implementation with ARMv8 vmull.p64 instructions. + * + * Copyright (C) 2015 Linaro Ltd. <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/hwcap.h> +#include <asm/neon.h> +#include <asm/simd.h> +#include <asm/unaligned.h> +#include <crypto/cryptd.h> +#include <crypto/internal/hash.h> +#include <crypto/gf128mul.h> +#include <linux/crypto.h> +#include <linux/module.h> + +MODULE_DESCRIPTION("GHASH secure hash using ARMv8 Crypto Extensions"); +MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); +MODULE_LICENSE("GPL v2"); + +#define GHASH_BLOCK_SIZE 16 +#define GHASH_DIGEST_SIZE 16 + +struct ghash_key { + u64 a; + u64 b; +}; + +struct ghash_desc_ctx { + u64 digest[GHASH_DIGEST_SIZE/sizeof(u64)]; + u8 buf[GHASH_BLOCK_SIZE]; + u32 count; +}; + +struct ghash_async_ctx { + struct cryptd_ahash *cryptd_tfm; +}; + +asmlinkage void pmull_ghash_update(int blocks, u64 dg[], const char *src, + struct ghash_key const *k, const char *head); + +static int ghash_init(struct shash_desc *desc) +{ + struct ghash_desc_ctx *ctx = shash_desc_ctx(desc); + + *ctx = (struct ghash_desc_ctx){}; + return 0; +} + +static int ghash_update(struct shash_desc *desc, const u8 *src, + unsigned int len) +{ + struct ghash_desc_ctx *ctx = shash_desc_ctx(desc); + unsigned int partial = ctx->count % GHASH_BLOCK_SIZE; + + ctx->count += len; + + if ((partial + len) >= GHASH_BLOCK_SIZE) { + struct ghash_key *key = crypto_shash_ctx(desc->tfm); + int blocks; + + if (partial) { + int p = GHASH_BLOCK_SIZE - partial; + + memcpy(ctx->buf + partial, src, p); + src += p; + len -= p; + } + + blocks = len / GHASH_BLOCK_SIZE; + len %= GHASH_BLOCK_SIZE; + + kernel_neon_begin(); + pmull_ghash_update(blocks, ctx->digest, src, key, + partial ? ctx->buf : NULL); + kernel_neon_end(); + src += blocks * GHASH_BLOCK_SIZE; + partial = 0; + } + if (len) + memcpy(ctx->buf + partial, src, len); + return 0; +} + +static int ghash_final(struct shash_desc *desc, u8 *dst) +{ + struct ghash_desc_ctx *ctx = shash_desc_ctx(desc); + unsigned int partial = ctx->count % GHASH_BLOCK_SIZE; + + if (partial) { + struct ghash_key *key = crypto_shash_ctx(desc->tfm); + + memset(ctx->buf + partial, 0, GHASH_BLOCK_SIZE - partial); + kernel_neon_begin(); + pmull_ghash_update(1, ctx->digest, ctx->buf, key, NULL); + kernel_neon_end(); + } + put_unaligned_be64(ctx->digest[1], dst); + put_unaligned_be64(ctx->digest[0], dst + 8); + + *ctx = (struct ghash_desc_ctx){}; + return 0; +} + +static int ghash_setkey(struct crypto_shash *tfm, + const u8 *inkey, unsigned int keylen) +{ + struct ghash_key *key = crypto_shash_ctx(tfm); + u64 a, b; + + if (keylen != GHASH_BLOCK_SIZE) { + crypto_shash_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); + return -EINVAL; + } + + /* perform multiplication by 'x' in GF(2^128) */ + b = get_unaligned_be64(inkey); + a = get_unaligned_be64(inkey + 8); + + key->a = (a << 1) | (b >> 63); + key->b = (b << 1) | (a >> 63); + + if (b >> 63) + key->b ^= 0xc200000000000000UL; + + return 0; +} + +static struct shash_alg ghash_alg = { + .digestsize = GHASH_DIGEST_SIZE, + .init = ghash_init, + .update = ghash_update, + .final = ghash_final, + .setkey = ghash_setkey, + .descsize = sizeof(struct ghash_desc_ctx), + .base = { + .cra_name = "ghash", + .cra_driver_name = "__driver-ghash-ce", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_SHASH | CRYPTO_ALG_INTERNAL, + .cra_blocksize = GHASH_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct ghash_key), + .cra_module = THIS_MODULE, + }, +}; + +static int ghash_async_init(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); + struct ahash_request *cryptd_req = ahash_request_ctx(req); + struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; + + if (!may_use_simd()) { + memcpy(cryptd_req, req, sizeof(*req)); + ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); + return crypto_ahash_init(cryptd_req); + } else { + struct shash_desc *desc = cryptd_shash_desc(cryptd_req); + struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm); + + desc->tfm = child; + desc->flags = req->base.flags; + return crypto_shash_init(desc); + } +} + +static int ghash_async_update(struct ahash_request *req) +{ + struct ahash_request *cryptd_req = ahash_request_ctx(req); + + if (!may_use_simd()) { + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); + struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; + + memcpy(cryptd_req, req, sizeof(*req)); + ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); + return crypto_ahash_update(cryptd_req); + } else { + struct shash_desc *desc = cryptd_shash_desc(cryptd_req); + return shash_ahash_update(req, desc); + } +} + +static int ghash_async_final(struct ahash_request *req) +{ + struct ahash_request *cryptd_req = ahash_request_ctx(req); + + if (!may_use_simd()) { + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); + struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; + + memcpy(cryptd_req, req, sizeof(*req)); + ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); + return crypto_ahash_final(cryptd_req); + } else { + struct shash_desc *desc = cryptd_shash_desc(cryptd_req); + return crypto_shash_final(desc, req->result); + } +} + +static int ghash_async_digest(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); + struct ahash_request *cryptd_req = ahash_request_ctx(req); + struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; + + if (!may_use_simd()) { + memcpy(cryptd_req, req, sizeof(*req)); + ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); + return crypto_ahash_digest(cryptd_req); + } else { + struct shash_desc *desc = cryptd_shash_desc(cryptd_req); + struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm); + + desc->tfm = child; + desc->flags = req->base.flags; + return shash_ahash_digest(req, desc); + } +} + +static int ghash_async_setkey(struct crypto_ahash *tfm, const u8 *key, + unsigned int keylen) +{ + struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); + struct crypto_ahash *child = &ctx->cryptd_tfm->base; + int err; + + crypto_ahash_clear_flags(child, CRYPTO_TFM_REQ_MASK); + crypto_ahash_set_flags(child, crypto_ahash_get_flags(tfm) + & CRYPTO_TFM_REQ_MASK); + err = crypto_ahash_setkey(child, key, keylen); + crypto_ahash_set_flags(tfm, crypto_ahash_get_flags(child) + & CRYPTO_TFM_RES_MASK); + + return err; +} + +static int ghash_async_init_tfm(struct crypto_tfm *tfm) +{ + struct cryptd_ahash *cryptd_tfm; + struct ghash_async_ctx *ctx = crypto_tfm_ctx(tfm); + + cryptd_tfm = cryptd_alloc_ahash("__driver-ghash-ce", + CRYPTO_ALG_INTERNAL, + CRYPTO_ALG_INTERNAL); + if (IS_ERR(cryptd_tfm)) + return PTR_ERR(cryptd_tfm); + ctx->cryptd_tfm = cryptd_tfm; + crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), + sizeof(struct ahash_request) + + crypto_ahash_reqsize(&cryptd_tfm->base)); + + return 0; +} + +static void ghash_async_exit_tfm(struct crypto_tfm *tfm) +{ + struct ghash_async_ctx *ctx = crypto_tfm_ctx(tfm); + + cryptd_free_ahash(ctx->cryptd_tfm); +} + +static struct ahash_alg ghash_async_alg = { + .init = ghash_async_init, + .update = ghash_async_update, + .final = ghash_async_final, + .setkey = ghash_async_setkey, + .digest = ghash_async_digest, + .halg.digestsize = GHASH_DIGEST_SIZE, + .halg.base = { + .cra_name = "ghash", + .cra_driver_name = "ghash-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC, + .cra_blocksize = GHASH_BLOCK_SIZE, + .cra_type = &crypto_ahash_type, + .cra_ctxsize = sizeof(struct ghash_async_ctx), + .cra_module = THIS_MODULE, + .cra_init = ghash_async_init_tfm, + .cra_exit = ghash_async_exit_tfm, + }, +}; + +static int __init ghash_ce_mod_init(void) +{ + int err; + + if (!(elf_hwcap2 & HWCAP2_PMULL)) + return -ENODEV; + + err = crypto_register_shash(&ghash_alg); + if (err) + return err; + err = crypto_register_ahash(&ghash_async_alg); + if (err) + goto err_shash; + + return 0; + +err_shash: + crypto_unregister_shash(&ghash_alg); + return err; +} + +static void __exit ghash_ce_mod_exit(void) +{ + crypto_unregister_ahash(&ghash_async_alg); + crypto_unregister_shash(&ghash_alg); +} + +module_init(ghash_ce_mod_init); +module_exit(ghash_ce_mod_exit); diff --git a/arch/arm/crypto/sha1-ce-core.S b/arch/arm/crypto/sha1-ce-core.S new file mode 100644 index 000000000000..b623f51ccbcf --- /dev/null +++ b/arch/arm/crypto/sha1-ce-core.S @@ -0,0 +1,125 @@ +/* + * sha1-ce-core.S - SHA-1 secure hash using ARMv8 Crypto Extensions + * + * Copyright (C) 2015 Linaro Ltd. + * Author: Ard Biesheuvel <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + + .text + .fpu crypto-neon-fp-armv8 + + k0 .req q0 + k1 .req q1 + k2 .req q2 + k3 .req q3 + + ta0 .req q4 + ta1 .req q5 + tb0 .req q5 + tb1 .req q4 + + dga .req q6 + dgb .req q7 + dgbs .req s28 + + dg0 .req q12 + dg1a0 .req q13 + dg1a1 .req q14 + dg1b0 .req q14 + dg1b1 .req q13 + + .macro add_only, op, ev, rc, s0, dg1 + .ifnb \s0 + vadd.u32 tb\ev, q\s0, \rc + .endif + sha1h.32 dg1b\ev, dg0 + .ifb \dg1 + sha1\op\().32 dg0, dg1a\ev, ta\ev + .else + sha1\op\().32 dg0, \dg1, ta\ev + .endif + .endm + + .macro add_update, op, ev, rc, s0, s1, s2, s3, dg1 + sha1su0.32 q\s0, q\s1, q\s2 + add_only \op, \ev, \rc, \s1, \dg1 + sha1su1.32 q\s0, q\s3 + .endm + + .align 6 +.Lsha1_rcon: + .word 0x5a827999, 0x5a827999, 0x5a827999, 0x5a827999 + .word 0x6ed9eba1, 0x6ed9eba1, 0x6ed9eba1, 0x6ed9eba1 + .word 0x8f1bbcdc, 0x8f1bbcdc, 0x8f1bbcdc, 0x8f1bbcdc + .word 0xca62c1d6, 0xca62c1d6, 0xca62c1d6, 0xca62c1d6 + + /* + * void sha1_ce_transform(struct sha1_state *sst, u8 const *src, + * int blocks); + */ +ENTRY(sha1_ce_transform) + /* load round constants */ + adr ip, .Lsha1_rcon + vld1.32 {k0-k1}, [ip, :128]! + vld1.32 {k2-k3}, [ip, :128] + + /* load state */ + vld1.32 {dga}, [r0] + vldr dgbs, [r0, #16] + + /* load input */ +0: vld1.32 {q8-q9}, [r1]! + vld1.32 {q10-q11}, [r1]! + subs r2, r2, #1 + +#ifndef CONFIG_CPU_BIG_ENDIAN + vrev32.8 q8, q8 + vrev32.8 q9, q9 + vrev32.8 q10, q10 + vrev32.8 q11, q11 +#endif + + vadd.u32 ta0, q8, k0 + vmov dg0, dga + + add_update c, 0, k0, 8, 9, 10, 11, dgb + add_update c, 1, k0, 9, 10, 11, 8 + add_update c, 0, k0, 10, 11, 8, 9 + add_update c, 1, k0, 11, 8, 9, 10 + add_update c, 0, k1, 8, 9, 10, 11 + + add_update p, 1, k1, 9, 10, 11, 8 + add_update p, 0, k1, 10, 11, 8, 9 + add_update p, 1, k1, 11, 8, 9, 10 + add_update p, 0, k1, 8, 9, 10, 11 + add_update p, 1, k2, 9, 10, 11, 8 + + add_update m, 0, k2, 10, 11, 8, 9 + add_update m, 1, k2, 11, 8, 9, 10 + add_update m, 0, k2, 8, 9, 10, 11 + add_update m, 1, k2, 9, 10, 11, 8 + add_update m, 0, k3, 10, 11, 8, 9 + + add_update p, 1, k3, 11, 8, 9, 10 + add_only p, 0, k3, 9 + add_only p, 1, k3, 10 + add_only p, 0, k3, 11 + add_only p, 1 + + /* update state */ + vadd.u32 dga, dga, dg0 + vadd.u32 dgb, dgb, dg1a0 + bne 0b + + /* store new state */ + vst1.32 {dga}, [r0] + vstr dgbs, [r0, #16] + bx lr +ENDPROC(sha1_ce_transform) diff --git a/arch/arm/crypto/sha1-ce-glue.c b/arch/arm/crypto/sha1-ce-glue.c new file mode 100644 index 000000000000..80bc2fcd241a --- /dev/null +++ b/arch/arm/crypto/sha1-ce-glue.c @@ -0,0 +1,96 @@ +/* + * sha1-ce-glue.c - SHA-1 secure hash using ARMv8 Crypto Extensions + * + * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <crypto/internal/hash.h> +#include <crypto/sha.h> +#include <crypto/sha1_base.h> +#include <linux/crypto.h> +#include <linux/module.h> + +#include <asm/hwcap.h> +#include <asm/neon.h> +#include <asm/simd.h> + +#include "sha1.h" + +MODULE_DESCRIPTION("SHA1 secure hash using ARMv8 Crypto Extensions"); +MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); +MODULE_LICENSE("GPL v2"); + +asmlinkage void sha1_ce_transform(struct sha1_state *sst, u8 const *src, + int blocks); + +static int sha1_ce_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + + if (!may_use_simd() || + (sctx->count % SHA1_BLOCK_SIZE) + len < SHA1_BLOCK_SIZE) + return sha1_update_arm(desc, data, len); + + kernel_neon_begin(); + sha1_base_do_update(desc, data, len, sha1_ce_transform); + kernel_neon_end(); + + return 0; +} + +static int sha1_ce_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) +{ + if (!may_use_simd()) + return sha1_finup_arm(desc, data, len, out); + + kernel_neon_begin(); + if (len) + sha1_base_do_update(desc, data, len, sha1_ce_transform); + sha1_base_do_finalize(desc, sha1_ce_transform); + kernel_neon_end(); + + return sha1_base_finish(desc, out); +} + +static int sha1_ce_final(struct shash_desc *desc, u8 *out) +{ + return sha1_ce_finup(desc, NULL, 0, out); +} + +static struct shash_alg alg = { + .init = sha1_base_init, + .update = sha1_ce_update, + .final = sha1_ce_final, + .finup = sha1_ce_finup, + .descsize = sizeof(struct sha1_state), + .digestsize = SHA1_DIGEST_SIZE, + .base = { + .cra_name = "sha1", + .cra_driver_name = "sha1-ce", + .cra_priority = 200, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA1_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}; + +static int __init sha1_ce_mod_init(void) +{ + if (!(elf_hwcap2 & HWCAP2_SHA1)) + return -ENODEV; + return crypto_register_shash(&alg); +} + +static void __exit sha1_ce_mod_fini(void) +{ + crypto_unregister_shash(&alg); +} + +module_init(sha1_ce_mod_init); +module_exit(sha1_ce_mod_fini); diff --git a/arch/arm/include/asm/crypto/sha1.h b/arch/arm/crypto/sha1.h index 75e6a417416b..ffd8bd08b1a7 100644 --- a/arch/arm/include/asm/crypto/sha1.h +++ b/arch/arm/crypto/sha1.h @@ -7,4 +7,7 @@ extern int sha1_update_arm(struct shash_desc *desc, const u8 *data, unsigned int len); +extern int sha1_finup_arm(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out); + #endif diff --git a/arch/arm/crypto/sha1_glue.c b/arch/arm/crypto/sha1_glue.c index e31b0440c613..6fc73bf8766d 100644 --- a/arch/arm/crypto/sha1_glue.c +++ b/arch/arm/crypto/sha1_glue.c @@ -22,127 +22,47 @@ #include <linux/cryptohash.h> #include <linux/types.h> #include <crypto/sha.h> +#include <crypto/sha1_base.h> #include <asm/byteorder.h> -#include <asm/crypto/sha1.h> +#include "sha1.h" asmlinkage void sha1_block_data_order(u32 *digest, const unsigned char *data, unsigned int rounds); - -static int sha1_init(struct shash_desc *desc) -{ - struct sha1_state *sctx = shash_desc_ctx(desc); - - *sctx = (struct sha1_state){ - .state = { SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4 }, - }; - - return 0; -} - - -static int __sha1_update(struct sha1_state *sctx, const u8 *data, - unsigned int len, unsigned int partial) -{ - unsigned int done = 0; - - sctx->count += len; - - if (partial) { - done = SHA1_BLOCK_SIZE - partial; - memcpy(sctx->buffer + partial, data, done); - sha1_block_data_order(sctx->state, sctx->buffer, 1); - } - - if (len - done >= SHA1_BLOCK_SIZE) { - const unsigned int rounds = (len - done) / SHA1_BLOCK_SIZE; - sha1_block_data_order(sctx->state, data + done, rounds); - done += rounds * SHA1_BLOCK_SIZE; - } - - memcpy(sctx->buffer, data + done, len - done); - return 0; -} - - int sha1_update_arm(struct shash_desc *desc, const u8 *data, unsigned int len) { - struct sha1_state *sctx = shash_desc_ctx(desc); - unsigned int partial = sctx->count % SHA1_BLOCK_SIZE; - int res; + /* make sure casting to sha1_block_fn() is safe */ + BUILD_BUG_ON(offsetof(struct sha1_state, state) != 0); - /* Handle the fast case right here */ - if (partial + len < SHA1_BLOCK_SIZE) { - sctx->count += len; - memcpy(sctx->buffer + partial, data, len); - return 0; - } - res = __sha1_update(sctx, data, len, partial); - return res; + return sha1_base_do_update(desc, data, len, + (sha1_block_fn *)sha1_block_data_order); } EXPORT_SYMBOL_GPL(sha1_update_arm); - -/* Add padding and return the message digest. */ static int sha1_final(struct shash_desc *desc, u8 *out) { - struct sha1_state *sctx = shash_desc_ctx(desc); - unsigned int i, index, padlen; - __be32 *dst = (__be32 *)out; - __be64 bits; - static const u8 padding[SHA1_BLOCK_SIZE] = { 0x80, }; - - bits = cpu_to_be64(sctx->count << 3); - - /* Pad out to 56 mod 64 and append length */ - index = sctx->count % SHA1_BLOCK_SIZE; - padlen = (index < 56) ? (56 - index) : ((SHA1_BLOCK_SIZE+56) - index); - /* We need to fill a whole block for __sha1_update() */ - if (padlen <= 56) { - sctx->count += padlen; - memcpy(sctx->buffer + index, padding, padlen); - } else { - __sha1_update(sctx, padding, padlen, index); - } - __sha1_update(sctx, (const u8 *)&bits, sizeof(bits), 56); - - /* Store state in digest */ - for (i = 0; i < 5; i++) - dst[i] = cpu_to_be32(sctx->state[i]); - - /* Wipe context */ - memset(sctx, 0, sizeof(*sctx)); - return 0; + sha1_base_do_finalize(desc, (sha1_block_fn *)sha1_block_data_order); + return sha1_base_finish(desc, out); } - -static int sha1_export(struct shash_desc *desc, void *out) +int sha1_finup_arm(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) { - struct sha1_state *sctx = shash_desc_ctx(desc); - memcpy(out, sctx, sizeof(*sctx)); - return 0; + sha1_base_do_update(desc, data, len, + (sha1_block_fn *)sha1_block_data_order); + return sha1_final(desc, out); } - - -static int sha1_import(struct shash_desc *desc, const void *in) -{ - struct sha1_state *sctx = shash_desc_ctx(desc); - memcpy(sctx, in, sizeof(*sctx)); - return 0; -} - +EXPORT_SYMBOL_GPL(sha1_finup_arm); static struct shash_alg alg = { .digestsize = SHA1_DIGEST_SIZE, - .init = sha1_init, + .init = sha1_base_init, .update = sha1_update_arm, .final = sha1_final, - .export = sha1_export, - .import = sha1_import, + .finup = sha1_finup_arm, .descsize = sizeof(struct sha1_state), - .statesize = sizeof(struct sha1_state), .base = { .cra_name = "sha1", .cra_driver_name= "sha1-asm", diff --git a/arch/arm/crypto/sha1_neon_glue.c b/arch/arm/crypto/sha1_neon_glue.c index 0b0083757d47..4e22f122f966 100644 --- a/arch/arm/crypto/sha1_neon_glue.c +++ b/arch/arm/crypto/sha1_neon_glue.c @@ -25,147 +25,60 @@ #include <linux/cryptohash.h> #include <linux/types.h> #include <crypto/sha.h> -#include <asm/byteorder.h> +#include <crypto/sha1_base.h> #include <asm/neon.h> #include <asm/simd.h> -#include <asm/crypto/sha1.h> +#include "sha1.h" asmlinkage void sha1_transform_neon(void *state_h, const char *data, unsigned int rounds); - -static int sha1_neon_init(struct shash_desc *desc) -{ - struct sha1_state *sctx = shash_desc_ctx(desc); - - *sctx = (struct sha1_state){ - .state = { SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4 }, - }; - - return 0; -} - -static int __sha1_neon_update(struct shash_desc *desc, const u8 *data, - unsigned int len, unsigned int partial) -{ - struct sha1_state *sctx = shash_desc_ctx(desc); - unsigned int done = 0; - - sctx->count += len; - - if (partial) { - done = SHA1_BLOCK_SIZE - partial; - memcpy(sctx->buffer + partial, data, done); - sha1_transform_neon(sctx->state, sctx->buffer, 1); - } - - if (len - done >= SHA1_BLOCK_SIZE) { - const unsigned int rounds = (len - done) / SHA1_BLOCK_SIZE; - - sha1_transform_neon(sctx->state, data + done, rounds); - done += rounds * SHA1_BLOCK_SIZE; - } - - memcpy(sctx->buffer, data + done, len - done); - - return 0; -} - static int sha1_neon_update(struct shash_desc *desc, const u8 *data, - unsigned int len) + unsigned int len) { struct sha1_state *sctx = shash_desc_ctx(desc); - unsigned int partial = sctx->count % SHA1_BLOCK_SIZE; - int res; - /* Handle the fast case right here */ - if (partial + len < SHA1_BLOCK_SIZE) { - sctx->count += len; - memcpy(sctx->buffer + partial, data, len); + if (!may_use_simd() || + (sctx->count % SHA1_BLOCK_SIZE) + len < SHA1_BLOCK_SIZE) + return sha1_update_arm(desc, data, len); - return 0; - } - - if (!may_use_simd()) { - res = sha1_update_arm(desc, data, len); - } else { - kernel_neon_begin(); - res = __sha1_neon_update(desc, data, len, partial); - kernel_neon_end(); - } - - return res; -} - - -/* Add padding and return the message digest. */ -static int sha1_neon_final(struct shash_desc *desc, u8 *out) -{ - struct sha1_state *sctx = shash_desc_ctx(desc); - unsigned int i, index, padlen; - __be32 *dst = (__be32 *)out; - __be64 bits; - static const u8 padding[SHA1_BLOCK_SIZE] = { 0x80, }; - - bits = cpu_to_be64(sctx->count << 3); - - /* Pad out to 56 mod 64 and append length */ - index = sctx->count % SHA1_BLOCK_SIZE; - padlen = (index < 56) ? (56 - index) : ((SHA1_BLOCK_SIZE+56) - index); - if (!may_use_simd()) { - sha1_update_arm(desc, padding, padlen); - sha1_update_arm(desc, (const u8 *)&bits, sizeof(bits)); - } else { - kernel_neon_begin(); - /* We need to fill a whole block for __sha1_neon_update() */ - if (padlen <= 56) { - sctx->count += padlen; - memcpy(sctx->buffer + index, padding, padlen); - } else { - __sha1_neon_update(desc, padding, padlen, index); - } - __sha1_neon_update(desc, (const u8 *)&bits, sizeof(bits), 56); - kernel_neon_end(); - } - - /* Store state in digest */ - for (i = 0; i < 5; i++) - dst[i] = cpu_to_be32(sctx->state[i]); - - /* Wipe context */ - memset(sctx, 0, sizeof(*sctx)); + kernel_neon_begin(); + sha1_base_do_update(desc, data, len, + (sha1_block_fn *)sha1_transform_neon); + kernel_neon_end(); return 0; } -static int sha1_neon_export(struct shash_desc *desc, void *out) +static int sha1_neon_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) { - struct sha1_state *sctx = shash_desc_ctx(desc); + if (!may_use_simd()) + return sha1_finup_arm(desc, data, len, out); - memcpy(out, sctx, sizeof(*sctx)); + kernel_neon_begin(); + if (len) + sha1_base_do_update(desc, data, len, + (sha1_block_fn *)sha1_transform_neon); + sha1_base_do_finalize(desc, (sha1_block_fn *)sha1_transform_neon); + kernel_neon_end(); - return 0; + return sha1_base_finish(desc, out); } -static int sha1_neon_import(struct shash_desc *desc, const void *in) +static int sha1_neon_final(struct shash_desc *desc, u8 *out) { - struct sha1_state *sctx = shash_desc_ctx(desc); - - memcpy(sctx, in, sizeof(*sctx)); - - return 0; + return sha1_neon_finup(desc, NULL, 0, out); } static struct shash_alg alg = { .digestsize = SHA1_DIGEST_SIZE, - .init = sha1_neon_init, + .init = sha1_base_init, .update = sha1_neon_update, .final = sha1_neon_final, - .export = sha1_neon_export, - .import = sha1_neon_import, + .finup = sha1_neon_finup, .descsize = sizeof(struct sha1_state), - .statesize = sizeof(struct sha1_state), .base = { .cra_name = "sha1", .cra_driver_name = "sha1-neon", diff --git a/arch/arm/crypto/sha2-ce-core.S b/arch/arm/crypto/sha2-ce-core.S new file mode 100644 index 000000000000..87ec11a5f405 --- /dev/null +++ b/arch/arm/crypto/sha2-ce-core.S @@ -0,0 +1,125 @@ +/* + * sha2-ce-core.S - SHA-224/256 secure hash using ARMv8 Crypto Extensions + * + * Copyright (C) 2015 Linaro Ltd. + * Author: Ard Biesheuvel <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + + .text + .fpu crypto-neon-fp-armv8 + + k0 .req q7 + k1 .req q8 + rk .req r3 + + ta0 .req q9 + ta1 .req q10 + tb0 .req q10 + tb1 .req q9 + + dga .req q11 + dgb .req q12 + + dg0 .req q13 + dg1 .req q14 + dg2 .req q15 + + .macro add_only, ev, s0 + vmov dg2, dg0 + .ifnb \s0 + vld1.32 {k\ev}, [rk, :128]! + .endif + sha256h.32 dg0, dg1, tb\ev + sha256h2.32 dg1, dg2, tb\ev + .ifnb \s0 + vadd.u32 ta\ev, q\s0, k\ev + .endif + .endm + + .macro add_update, ev, s0, s1, s2, s3 + sha256su0.32 q\s0, q\s1 + add_only \ev, \s1 + sha256su1.32 q\s0, q\s2, q\s3 + .endm + + .align 6 +.Lsha256_rcon: + .word 0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5 + .word 0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5 + .word 0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3 + .word 0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174 + .word 0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc + .word 0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da + .word 0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7 + .word 0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967 + .word 0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13 + .word 0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85 + .word 0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3 + .word 0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070 + .word 0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5 + .word 0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3 + .word 0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208 + .word 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2 + + /* + * void sha2_ce_transform(struct sha256_state *sst, u8 const *src, + int blocks); + */ +ENTRY(sha2_ce_transform) + /* load state */ + vld1.32 {dga-dgb}, [r0] + + /* load input */ +0: vld1.32 {q0-q1}, [r1]! + vld1.32 {q2-q3}, [r1]! + subs r2, r2, #1 + +#ifndef CONFIG_CPU_BIG_ENDIAN + vrev32.8 q0, q0 + vrev32.8 q1, q1 + vrev32.8 q2, q2 + vrev32.8 q3, q3 +#endif + + /* load first round constant */ + adr rk, .Lsha256_rcon + vld1.32 {k0}, [rk, :128]! + + vadd.u32 ta0, q0, k0 + vmov dg0, dga + vmov dg1, dgb + + add_update 1, 0, 1, 2, 3 + add_update 0, 1, 2, 3, 0 + add_update 1, 2, 3, 0, 1 + add_update 0, 3, 0, 1, 2 + add_update 1, 0, 1, 2, 3 + add_update 0, 1, 2, 3, 0 + add_update 1, 2, 3, 0, 1 + add_update 0, 3, 0, 1, 2 + add_update 1, 0, 1, 2, 3 + add_update 0, 1, 2, 3, 0 + add_update 1, 2, 3, 0, 1 + add_update 0, 3, 0, 1, 2 + + add_only 1, 1 + add_only 0, 2 + add_only 1, 3 + add_only 0 + + /* update state */ + vadd.u32 dga, dga, dg0 + vadd.u32 dgb, dgb, dg1 + bne 0b + + /* store new state */ + vst1.32 {dga-dgb}, [r0] + bx lr +ENDPROC(sha2_ce_transform) diff --git a/arch/arm/crypto/sha2-ce-glue.c b/arch/arm/crypto/sha2-ce-glue.c new file mode 100644 index 000000000000..0755b2d657f3 --- /dev/null +++ b/arch/arm/crypto/sha2-ce-glue.c @@ -0,0 +1,114 @@ +/* + * sha2-ce-glue.c - SHA-224/SHA-256 using ARMv8 Crypto Extensions + * + * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <crypto/internal/hash.h> +#include <crypto/sha.h> +#include <crypto/sha256_base.h> +#include <linux/crypto.h> +#include <linux/module.h> + +#include <asm/hwcap.h> +#include <asm/simd.h> +#include <asm/neon.h> +#include <asm/unaligned.h> + +#include "sha256_glue.h" + +MODULE_DESCRIPTION("SHA-224/SHA-256 secure hash using ARMv8 Crypto Extensions"); +MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); +MODULE_LICENSE("GPL v2"); + +asmlinkage void sha2_ce_transform(struct sha256_state *sst, u8 const *src, + int blocks); + +static int sha2_ce_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + + if (!may_use_simd() || + (sctx->count % SHA256_BLOCK_SIZE) + len < SHA256_BLOCK_SIZE) + return crypto_sha256_arm_update(desc, data, len); + + kernel_neon_begin(); + sha256_base_do_update(desc, data, len, + (sha256_block_fn *)sha2_ce_transform); + kernel_neon_end(); + + return 0; +} + +static int sha2_ce_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) +{ + if (!may_use_simd()) + return crypto_sha256_arm_finup(desc, data, len, out); + + kernel_neon_begin(); + if (len) + sha256_base_do_update(desc, data, len, + (sha256_block_fn *)sha2_ce_transform); + sha256_base_do_finalize(desc, (sha256_block_fn *)sha2_ce_transform); + kernel_neon_end(); + + return sha256_base_finish(desc, out); +} + +static int sha2_ce_final(struct shash_desc *desc, u8 *out) +{ + return sha2_ce_finup(desc, NULL, 0, out); +} + +static struct shash_alg algs[] = { { + .init = sha224_base_init, + .update = sha2_ce_update, + .final = sha2_ce_final, + .finup = sha2_ce_finup, + .descsize = sizeof(struct sha256_state), + .digestsize = SHA224_DIGEST_SIZE, + .base = { + .cra_name = "sha224", + .cra_driver_name = "sha224-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA256_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}, { + .init = sha256_base_init, + .update = sha2_ce_update, + .final = sha2_ce_final, + .finup = sha2_ce_finup, + .descsize = sizeof(struct sha256_state), + .digestsize = SHA256_DIGEST_SIZE, + .base = { + .cra_name = "sha256", + .cra_driver_name = "sha256-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA256_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +} }; + +static int __init sha2_ce_mod_init(void) +{ + if (!(elf_hwcap2 & HWCAP2_SHA2)) + return -ENODEV; + return crypto_register_shashes(algs, ARRAY_SIZE(algs)); +} + +static void __exit sha2_ce_mod_fini(void) +{ + crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); +} + +module_init(sha2_ce_mod_init); +module_exit(sha2_ce_mod_fini); diff --git a/arch/arm/crypto/sha256-armv4.pl b/arch/arm/crypto/sha256-armv4.pl new file mode 100644 index 000000000000..fac0533ea633 --- /dev/null +++ b/arch/arm/crypto/sha256-armv4.pl @@ -0,0 +1,716 @@ +#!/usr/bin/env perl + +# ==================================================================== +# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# +# Permission to use under GPL terms is granted. +# ==================================================================== + +# SHA256 block procedure for ARMv4. May 2007. + +# Performance is ~2x better than gcc 3.4 generated code and in "abso- +# lute" terms is ~2250 cycles per 64-byte block or ~35 cycles per +# byte [on single-issue Xscale PXA250 core]. + +# July 2010. +# +# Rescheduling for dual-issue pipeline resulted in 22% improvement on +# Cortex A8 core and ~20 cycles per processed byte. + +# February 2011. +# +# Profiler-assisted and platform-specific optimization resulted in 16% +# improvement on Cortex A8 core and ~15.4 cycles per processed byte. + +# September 2013. +# +# Add NEON implementation. On Cortex A8 it was measured to process one +# byte in 12.5 cycles or 23% faster than integer-only code. Snapdragon +# S4 does it in 12.5 cycles too, but it's 50% faster than integer-only +# code (meaning that latter performs sub-optimally, nothing was done +# about it). + +# May 2014. +# +# Add ARMv8 code path performing at 2.0 cpb on Apple A7. + +while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {} +open STDOUT,">$output"; + +$ctx="r0"; $t0="r0"; +$inp="r1"; $t4="r1"; +$len="r2"; $t1="r2"; +$T1="r3"; $t3="r3"; +$A="r4"; +$B="r5"; +$C="r6"; +$D="r7"; +$E="r8"; +$F="r9"; +$G="r10"; +$H="r11"; +@V=($A,$B,$C,$D,$E,$F,$G,$H); +$t2="r12"; +$Ktbl="r14"; + +@Sigma0=( 2,13,22); +@Sigma1=( 6,11,25); +@sigma0=( 7,18, 3); +@sigma1=(17,19,10); + +sub BODY_00_15 { +my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; + +$code.=<<___ if ($i<16); +#if __ARM_ARCH__>=7 + @ ldr $t1,[$inp],#4 @ $i +# if $i==15 + str $inp,[sp,#17*4] @ make room for $t4 +# endif + eor $t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]` + add $a,$a,$t2 @ h+=Maj(a,b,c) from the past + eor $t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]` @ Sigma1(e) +# ifndef __ARMEB__ + rev $t1,$t1 +# endif +#else + @ ldrb $t1,[$inp,#3] @ $i + add $a,$a,$t2 @ h+=Maj(a,b,c) from the past + ldrb $t2,[$inp,#2] + ldrb $t0,[$inp,#1] + orr $t1,$t1,$t2,lsl#8 + ldrb $t2,[$inp],#4 + orr $t1,$t1,$t0,lsl#16 +# if $i==15 + str $inp,[sp,#17*4] @ make room for $t4 +# endif + eor $t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]` + orr $t1,$t1,$t2,lsl#24 + eor $t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]` @ Sigma1(e) +#endif +___ +$code.=<<___; + ldr $t2,[$Ktbl],#4 @ *K256++ + add $h,$h,$t1 @ h+=X[i] + str $t1,[sp,#`$i%16`*4] + eor $t1,$f,$g + add $h,$h,$t0,ror#$Sigma1[0] @ h+=Sigma1(e) + and $t1,$t1,$e + add $h,$h,$t2 @ h+=K256[i] + eor $t1,$t1,$g @ Ch(e,f,g) + eor $t0,$a,$a,ror#`$Sigma0[1]-$Sigma0[0]` + add $h,$h,$t1 @ h+=Ch(e,f,g) +#if $i==31 + and $t2,$t2,#0xff + cmp $t2,#0xf2 @ done? +#endif +#if $i<15 +# if __ARM_ARCH__>=7 + ldr $t1,[$inp],#4 @ prefetch +# else + ldrb $t1,[$inp,#3] +# endif + eor $t2,$a,$b @ a^b, b^c in next round +#else + ldr $t1,[sp,#`($i+2)%16`*4] @ from future BODY_16_xx + eor $t2,$a,$b @ a^b, b^c in next round + ldr $t4,[sp,#`($i+15)%16`*4] @ from future BODY_16_xx +#endif + eor $t0,$t0,$a,ror#`$Sigma0[2]-$Sigma0[0]` @ Sigma0(a) + and $t3,$t3,$t2 @ (b^c)&=(a^b) + add $d,$d,$h @ d+=h + eor $t3,$t3,$b @ Maj(a,b,c) + add $h,$h,$t0,ror#$Sigma0[0] @ h+=Sigma0(a) + @ add $h,$h,$t3 @ h+=Maj(a,b,c) +___ + ($t2,$t3)=($t3,$t2); +} + +sub BODY_16_XX { +my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_; + +$code.=<<___; + @ ldr $t1,[sp,#`($i+1)%16`*4] @ $i + @ ldr $t4,[sp,#`($i+14)%16`*4] + mov $t0,$t1,ror#$sigma0[0] + add $a,$a,$t2 @ h+=Maj(a,b,c) from the past + mov $t2,$t4,ror#$sigma1[0] + eor $t0,$t0,$t1,ror#$sigma0[1] + eor $t2,$t2,$t4,ror#$sigma1[1] + eor $t0,$t0,$t1,lsr#$sigma0[2] @ sigma0(X[i+1]) + ldr $t1,[sp,#`($i+0)%16`*4] + eor $t2,$t2,$t4,lsr#$sigma1[2] @ sigma1(X[i+14]) + ldr $t4,[sp,#`($i+9)%16`*4] + + add $t2,$t2,$t0 + eor $t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]` @ from BODY_00_15 + add $t1,$t1,$t2 + eor $t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]` @ Sigma1(e) + add $t1,$t1,$t4 @ X[i] +___ + &BODY_00_15(@_); +} + +$code=<<___; +#ifndef __KERNEL__ +# include "arm_arch.h" +#else +# define __ARM_ARCH__ __LINUX_ARM_ARCH__ +# define __ARM_MAX_ARCH__ 7 +#endif + +.text +#if __ARM_ARCH__<7 +.code 32 +#else +.syntax unified +# ifdef __thumb2__ +# define adrl adr +.thumb +# else +.code 32 +# endif +#endif + +.type K256,%object +.align 5 +K256: +.word 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 +.word 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 +.word 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 +.word 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 +.word 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc +.word 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da +.word 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 +.word 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 +.word 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 +.word 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 +.word 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 +.word 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 +.word 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 +.word 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 +.word 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 +.word 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 +.size K256,.-K256 +.word 0 @ terminator +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) +.LOPENSSL_armcap: +.word OPENSSL_armcap_P-sha256_block_data_order +#endif +.align 5 + +.global sha256_block_data_order +.type sha256_block_data_order,%function +sha256_block_data_order: +#if __ARM_ARCH__<7 + sub r3,pc,#8 @ sha256_block_data_order +#else + adr r3,sha256_block_data_order +#endif +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) + ldr r12,.LOPENSSL_armcap + ldr r12,[r3,r12] @ OPENSSL_armcap_P + tst r12,#ARMV8_SHA256 + bne .LARMv8 + tst r12,#ARMV7_NEON + bne .LNEON +#endif + add $len,$inp,$len,lsl#6 @ len to point at the end of inp + stmdb sp!,{$ctx,$inp,$len,r4-r11,lr} + ldmia $ctx,{$A,$B,$C,$D,$E,$F,$G,$H} + sub $Ktbl,r3,#256+32 @ K256 + sub sp,sp,#16*4 @ alloca(X[16]) +.Loop: +# if __ARM_ARCH__>=7 + ldr $t1,[$inp],#4 +# else + ldrb $t1,[$inp,#3] +# endif + eor $t3,$B,$C @ magic + eor $t2,$t2,$t2 +___ +for($i=0;$i<16;$i++) { &BODY_00_15($i,@V); unshift(@V,pop(@V)); } +$code.=".Lrounds_16_xx:\n"; +for (;$i<32;$i++) { &BODY_16_XX($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; +#if __ARM_ARCH__>=7 + ite eq @ Thumb2 thing, sanity check in ARM +#endif + ldreq $t3,[sp,#16*4] @ pull ctx + bne .Lrounds_16_xx + + add $A,$A,$t2 @ h+=Maj(a,b,c) from the past + ldr $t0,[$t3,#0] + ldr $t1,[$t3,#4] + ldr $t2,[$t3,#8] + add $A,$A,$t0 + ldr $t0,[$t3,#12] + add $B,$B,$t1 + ldr $t1,[$t3,#16] + add $C,$C,$t2 + ldr $t2,[$t3,#20] + add $D,$D,$t0 + ldr $t0,[$t3,#24] + add $E,$E,$t1 + ldr $t1,[$t3,#28] + add $F,$F,$t2 + ldr $inp,[sp,#17*4] @ pull inp + ldr $t2,[sp,#18*4] @ pull inp+len + add $G,$G,$t0 + add $H,$H,$t1 + stmia $t3,{$A,$B,$C,$D,$E,$F,$G,$H} + cmp $inp,$t2 + sub $Ktbl,$Ktbl,#256 @ rewind Ktbl + bne .Loop + + add sp,sp,#`16+3`*4 @ destroy frame +#if __ARM_ARCH__>=5 + ldmia sp!,{r4-r11,pc} +#else + ldmia sp!,{r4-r11,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + bx lr @ interoperable with Thumb ISA:-) +#endif +.size sha256_block_data_order,.-sha256_block_data_order +___ +###################################################################### +# NEON stuff +# +{{{ +my @X=map("q$_",(0..3)); +my ($T0,$T1,$T2,$T3,$T4,$T5)=("q8","q9","q10","q11","d24","d25"); +my $Xfer=$t4; +my $j=0; + +sub Dlo() { shift=~m|q([1]?[0-9])|?"d".($1*2):""; } +sub Dhi() { shift=~m|q([1]?[0-9])|?"d".($1*2+1):""; } + +sub AUTOLOAD() # thunk [simplified] x86-style perlasm +{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./; + my $arg = pop; + $arg = "#$arg" if ($arg*1 eq $arg); + $code .= "\t$opcode\t".join(',',@_,$arg)."\n"; +} + +sub Xupdate() +{ use integer; + my $body = shift; + my @insns = (&$body,&$body,&$body,&$body); + my ($a,$b,$c,$d,$e,$f,$g,$h); + + &vext_8 ($T0,@X[0],@X[1],4); # X[1..4] + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &vext_8 ($T1,@X[2],@X[3],4); # X[9..12] + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T2,$T0,$sigma0[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &vadd_i32 (@X[0],@X[0],$T1); # X[0..3] += X[9..12] + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T1,$T0,$sigma0[2]); + eval(shift(@insns)); + eval(shift(@insns)); + &vsli_32 ($T2,$T0,32-$sigma0[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T3,$T0,$sigma0[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &veor ($T1,$T1,$T2); + eval(shift(@insns)); + eval(shift(@insns)); + &vsli_32 ($T3,$T0,32-$sigma0[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T4,&Dhi(@X[3]),$sigma1[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &veor ($T1,$T1,$T3); # sigma0(X[1..4]) + eval(shift(@insns)); + eval(shift(@insns)); + &vsli_32 ($T4,&Dhi(@X[3]),32-$sigma1[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T5,&Dhi(@X[3]),$sigma1[2]); + eval(shift(@insns)); + eval(shift(@insns)); + &vadd_i32 (@X[0],@X[0],$T1); # X[0..3] += sigma0(X[1..4]) + eval(shift(@insns)); + eval(shift(@insns)); + &veor ($T5,$T5,$T4); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T4,&Dhi(@X[3]),$sigma1[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &vsli_32 ($T4,&Dhi(@X[3]),32-$sigma1[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &veor ($T5,$T5,$T4); # sigma1(X[14..15]) + eval(shift(@insns)); + eval(shift(@insns)); + &vadd_i32 (&Dlo(@X[0]),&Dlo(@X[0]),$T5);# X[0..1] += sigma1(X[14..15]) + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T4,&Dlo(@X[0]),$sigma1[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &vsli_32 ($T4,&Dlo(@X[0]),32-$sigma1[0]); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T5,&Dlo(@X[0]),$sigma1[2]); + eval(shift(@insns)); + eval(shift(@insns)); + &veor ($T5,$T5,$T4); + eval(shift(@insns)); + eval(shift(@insns)); + &vshr_u32 ($T4,&Dlo(@X[0]),$sigma1[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &vld1_32 ("{$T0}","[$Ktbl,:128]!"); + eval(shift(@insns)); + eval(shift(@insns)); + &vsli_32 ($T4,&Dlo(@X[0]),32-$sigma1[1]); + eval(shift(@insns)); + eval(shift(@insns)); + &veor ($T5,$T5,$T4); # sigma1(X[16..17]) + eval(shift(@insns)); + eval(shift(@insns)); + &vadd_i32 (&Dhi(@X[0]),&Dhi(@X[0]),$T5);# X[2..3] += sigma1(X[16..17]) + eval(shift(@insns)); + eval(shift(@insns)); + &vadd_i32 ($T0,$T0,@X[0]); + while($#insns>=2) { eval(shift(@insns)); } + &vst1_32 ("{$T0}","[$Xfer,:128]!"); + eval(shift(@insns)); + eval(shift(@insns)); + + push(@X,shift(@X)); # "rotate" X[] +} + +sub Xpreload() +{ use integer; + my $body = shift; + my @insns = (&$body,&$body,&$body,&$body); + my ($a,$b,$c,$d,$e,$f,$g,$h); + + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &vld1_32 ("{$T0}","[$Ktbl,:128]!"); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &vrev32_8 (@X[0],@X[0]); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + eval(shift(@insns)); + &vadd_i32 ($T0,$T0,@X[0]); + foreach (@insns) { eval; } # remaining instructions + &vst1_32 ("{$T0}","[$Xfer,:128]!"); + + push(@X,shift(@X)); # "rotate" X[] +} + +sub body_00_15 () { + ( + '($a,$b,$c,$d,$e,$f,$g,$h)=@V;'. + '&add ($h,$h,$t1)', # h+=X[i]+K[i] + '&eor ($t1,$f,$g)', + '&eor ($t0,$e,$e,"ror#".($Sigma1[1]-$Sigma1[0]))', + '&add ($a,$a,$t2)', # h+=Maj(a,b,c) from the past + '&and ($t1,$t1,$e)', + '&eor ($t2,$t0,$e,"ror#".($Sigma1[2]-$Sigma1[0]))', # Sigma1(e) + '&eor ($t0,$a,$a,"ror#".($Sigma0[1]-$Sigma0[0]))', + '&eor ($t1,$t1,$g)', # Ch(e,f,g) + '&add ($h,$h,$t2,"ror#$Sigma1[0]")', # h+=Sigma1(e) + '&eor ($t2,$a,$b)', # a^b, b^c in next round + '&eor ($t0,$t0,$a,"ror#".($Sigma0[2]-$Sigma0[0]))', # Sigma0(a) + '&add ($h,$h,$t1)', # h+=Ch(e,f,g) + '&ldr ($t1,sprintf "[sp,#%d]",4*(($j+1)&15)) if (($j&15)!=15);'. + '&ldr ($t1,"[$Ktbl]") if ($j==15);'. + '&ldr ($t1,"[sp,#64]") if ($j==31)', + '&and ($t3,$t3,$t2)', # (b^c)&=(a^b) + '&add ($d,$d,$h)', # d+=h + '&add ($h,$h,$t0,"ror#$Sigma0[0]");'. # h+=Sigma0(a) + '&eor ($t3,$t3,$b)', # Maj(a,b,c) + '$j++; unshift(@V,pop(@V)); ($t2,$t3)=($t3,$t2);' + ) +} + +$code.=<<___; +#if __ARM_MAX_ARCH__>=7 +.arch armv7-a +.fpu neon + +.global sha256_block_data_order_neon +.type sha256_block_data_order_neon,%function +.align 4 +sha256_block_data_order_neon: +.LNEON: + stmdb sp!,{r4-r12,lr} + + sub $H,sp,#16*4+16 + adrl $Ktbl,K256 + bic $H,$H,#15 @ align for 128-bit stores + mov $t2,sp + mov sp,$H @ alloca + add $len,$inp,$len,lsl#6 @ len to point at the end of inp + + vld1.8 {@X[0]},[$inp]! + vld1.8 {@X[1]},[$inp]! + vld1.8 {@X[2]},[$inp]! + vld1.8 {@X[3]},[$inp]! + vld1.32 {$T0},[$Ktbl,:128]! + vld1.32 {$T1},[$Ktbl,:128]! + vld1.32 {$T2},[$Ktbl,:128]! + vld1.32 {$T3},[$Ktbl,:128]! + vrev32.8 @X[0],@X[0] @ yes, even on + str $ctx,[sp,#64] + vrev32.8 @X[1],@X[1] @ big-endian + str $inp,[sp,#68] + mov $Xfer,sp + vrev32.8 @X[2],@X[2] + str $len,[sp,#72] + vrev32.8 @X[3],@X[3] + str $t2,[sp,#76] @ save original sp + vadd.i32 $T0,$T0,@X[0] + vadd.i32 $T1,$T1,@X[1] + vst1.32 {$T0},[$Xfer,:128]! + vadd.i32 $T2,$T2,@X[2] + vst1.32 {$T1},[$Xfer,:128]! + vadd.i32 $T3,$T3,@X[3] + vst1.32 {$T2},[$Xfer,:128]! + vst1.32 {$T3},[$Xfer,:128]! + + ldmia $ctx,{$A-$H} + sub $Xfer,$Xfer,#64 + ldr $t1,[sp,#0] + eor $t2,$t2,$t2 + eor $t3,$B,$C + b .L_00_48 + +.align 4 +.L_00_48: +___ + &Xupdate(\&body_00_15); + &Xupdate(\&body_00_15); + &Xupdate(\&body_00_15); + &Xupdate(\&body_00_15); +$code.=<<___; + teq $t1,#0 @ check for K256 terminator + ldr $t1,[sp,#0] + sub $Xfer,$Xfer,#64 + bne .L_00_48 + + ldr $inp,[sp,#68] + ldr $t0,[sp,#72] + sub $Ktbl,$Ktbl,#256 @ rewind $Ktbl + teq $inp,$t0 + it eq + subeq $inp,$inp,#64 @ avoid SEGV + vld1.8 {@X[0]},[$inp]! @ load next input block + vld1.8 {@X[1]},[$inp]! + vld1.8 {@X[2]},[$inp]! + vld1.8 {@X[3]},[$inp]! + it ne + strne $inp,[sp,#68] + mov $Xfer,sp +___ + &Xpreload(\&body_00_15); + &Xpreload(\&body_00_15); + &Xpreload(\&body_00_15); + &Xpreload(\&body_00_15); +$code.=<<___; + ldr $t0,[$t1,#0] + add $A,$A,$t2 @ h+=Maj(a,b,c) from the past + ldr $t2,[$t1,#4] + ldr $t3,[$t1,#8] + ldr $t4,[$t1,#12] + add $A,$A,$t0 @ accumulate + ldr $t0,[$t1,#16] + add $B,$B,$t2 + ldr $t2,[$t1,#20] + add $C,$C,$t3 + ldr $t3,[$t1,#24] + add $D,$D,$t4 + ldr $t4,[$t1,#28] + add $E,$E,$t0 + str $A,[$t1],#4 + add $F,$F,$t2 + str $B,[$t1],#4 + add $G,$G,$t3 + str $C,[$t1],#4 + add $H,$H,$t4 + str $D,[$t1],#4 + stmia $t1,{$E-$H} + + ittte ne + movne $Xfer,sp + ldrne $t1,[sp,#0] + eorne $t2,$t2,$t2 + ldreq sp,[sp,#76] @ restore original sp + itt ne + eorne $t3,$B,$C + bne .L_00_48 + + ldmia sp!,{r4-r12,pc} +.size sha256_block_data_order_neon,.-sha256_block_data_order_neon +#endif +___ +}}} +###################################################################### +# ARMv8 stuff +# +{{{ +my ($ABCD,$EFGH,$abcd)=map("q$_",(0..2)); +my @MSG=map("q$_",(8..11)); +my ($W0,$W1,$ABCD_SAVE,$EFGH_SAVE)=map("q$_",(12..15)); +my $Ktbl="r3"; + +$code.=<<___; +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) + +# ifdef __thumb2__ +# define INST(a,b,c,d) .byte c,d|0xc,a,b +# else +# define INST(a,b,c,d) .byte a,b,c,d +# endif + +.type sha256_block_data_order_armv8,%function +.align 5 +sha256_block_data_order_armv8: +.LARMv8: + vld1.32 {$ABCD,$EFGH},[$ctx] +# ifdef __thumb2__ + adr $Ktbl,.LARMv8 + sub $Ktbl,$Ktbl,#.LARMv8-K256 +# else + adrl $Ktbl,K256 +# endif + add $len,$inp,$len,lsl#6 @ len to point at the end of inp + +.Loop_v8: + vld1.8 {@MSG[0]-@MSG[1]},[$inp]! + vld1.8 {@MSG[2]-@MSG[3]},[$inp]! + vld1.32 {$W0},[$Ktbl]! + vrev32.8 @MSG[0],@MSG[0] + vrev32.8 @MSG[1],@MSG[1] + vrev32.8 @MSG[2],@MSG[2] + vrev32.8 @MSG[3],@MSG[3] + vmov $ABCD_SAVE,$ABCD @ offload + vmov $EFGH_SAVE,$EFGH + teq $inp,$len +___ +for($i=0;$i<12;$i++) { +$code.=<<___; + vld1.32 {$W1},[$Ktbl]! + vadd.i32 $W0,$W0,@MSG[0] + sha256su0 @MSG[0],@MSG[1] + vmov $abcd,$ABCD + sha256h $ABCD,$EFGH,$W0 + sha256h2 $EFGH,$abcd,$W0 + sha256su1 @MSG[0],@MSG[2],@MSG[3] +___ + ($W0,$W1)=($W1,$W0); push(@MSG,shift(@MSG)); +} +$code.=<<___; + vld1.32 {$W1},[$Ktbl]! + vadd.i32 $W0,$W0,@MSG[0] + vmov $abcd,$ABCD + sha256h $ABCD,$EFGH,$W0 + sha256h2 $EFGH,$abcd,$W0 + + vld1.32 {$W0},[$Ktbl]! + vadd.i32 $W1,$W1,@MSG[1] + vmov $abcd,$ABCD + sha256h $ABCD,$EFGH,$W1 + sha256h2 $EFGH,$abcd,$W1 + + vld1.32 {$W1},[$Ktbl] + vadd.i32 $W0,$W0,@MSG[2] + sub $Ktbl,$Ktbl,#256-16 @ rewind + vmov $abcd,$ABCD + sha256h $ABCD,$EFGH,$W0 + sha256h2 $EFGH,$abcd,$W0 + + vadd.i32 $W1,$W1,@MSG[3] + vmov $abcd,$ABCD + sha256h $ABCD,$EFGH,$W1 + sha256h2 $EFGH,$abcd,$W1 + + vadd.i32 $ABCD,$ABCD,$ABCD_SAVE + vadd.i32 $EFGH,$EFGH,$EFGH_SAVE + it ne + bne .Loop_v8 + + vst1.32 {$ABCD,$EFGH},[$ctx] + + ret @ bx lr +.size sha256_block_data_order_armv8,.-sha256_block_data_order_armv8 +#endif +___ +}}} +$code.=<<___; +.asciz "SHA256 block transform for ARMv4/NEON/ARMv8, CRYPTOGAMS by <appro\@openssl.org>" +.align 2 +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) +.comm OPENSSL_armcap_P,4,4 +#endif +___ + +open SELF,$0; +while(<SELF>) { + next if (/^#!/); + last if (!s/^#/@/ and !/^$/); + print; +} +close SELF; + +{ my %opcode = ( + "sha256h" => 0xf3000c40, "sha256h2" => 0xf3100c40, + "sha256su0" => 0xf3ba03c0, "sha256su1" => 0xf3200c40 ); + + sub unsha256 { + my ($mnemonic,$arg)=@_; + + if ($arg =~ m/q([0-9]+)(?:,\s*q([0-9]+))?,\s*q([0-9]+)/o) { + my $word = $opcode{$mnemonic}|(($1&7)<<13)|(($1&8)<<19) + |(($2&7)<<17)|(($2&8)<<4) + |(($3&7)<<1) |(($3&8)<<2); + # since ARMv7 instructions are always encoded little-endian. + # correct solution is to use .inst directive, but older + # assemblers don't implement it:-( + sprintf "INST(0x%02x,0x%02x,0x%02x,0x%02x)\t@ %s %s", + $word&0xff,($word>>8)&0xff, + ($word>>16)&0xff,($word>>24)&0xff, + $mnemonic,$arg; + } + } +} + +foreach (split($/,$code)) { + + s/\`([^\`]*)\`/eval $1/geo; + + s/\b(sha256\w+)\s+(q.*)/unsha256($1,$2)/geo; + + s/\bret\b/bx lr/go or + s/\bbx\s+lr\b/.word\t0xe12fff1e/go; # make it possible to compile with -march=armv4 + + print $_,"\n"; +} + +close STDOUT; # enforce flush diff --git a/arch/arm/crypto/sha256-core.S_shipped b/arch/arm/crypto/sha256-core.S_shipped new file mode 100644 index 000000000000..555a1a8eec90 --- /dev/null +++ b/arch/arm/crypto/sha256-core.S_shipped @@ -0,0 +1,2808 @@ + +@ ==================================================================== +@ Written by Andy Polyakov <appro@openssl.org> for the OpenSSL +@ project. The module is, however, dual licensed under OpenSSL and +@ CRYPTOGAMS licenses depending on where you obtain it. For further +@ details see http://www.openssl.org/~appro/cryptogams/. +@ +@ Permission to use under GPL terms is granted. +@ ==================================================================== + +@ SHA256 block procedure for ARMv4. May 2007. + +@ Performance is ~2x better than gcc 3.4 generated code and in "abso- +@ lute" terms is ~2250 cycles per 64-byte block or ~35 cycles per +@ byte [on single-issue Xscale PXA250 core]. + +@ July 2010. +@ +@ Rescheduling for dual-issue pipeline resulted in 22% improvement on +@ Cortex A8 core and ~20 cycles per processed byte. + +@ February 2011. +@ +@ Profiler-assisted and platform-specific optimization resulted in 16% +@ improvement on Cortex A8 core and ~15.4 cycles per processed byte. + +@ September 2013. +@ +@ Add NEON implementation. On Cortex A8 it was measured to process one +@ byte in 12.5 cycles or 23% faster than integer-only code. Snapdragon +@ S4 does it in 12.5 cycles too, but it's 50% faster than integer-only +@ code (meaning that latter performs sub-optimally, nothing was done +@ about it). + +@ May 2014. +@ +@ Add ARMv8 code path performing at 2.0 cpb on Apple A7. + +#ifndef __KERNEL__ +# include "arm_arch.h" +#else +# define __ARM_ARCH__ __LINUX_ARM_ARCH__ +# define __ARM_MAX_ARCH__ 7 +#endif + +.text +#if __ARM_ARCH__<7 +.code 32 +#else +.syntax unified +# ifdef __thumb2__ +# define adrl adr +.thumb +# else +.code 32 +# endif +#endif + +.type K256,%object +.align 5 +K256: +.word 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 +.word 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 +.word 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 +.word 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 +.word 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc +.word 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da +.word 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 +.word 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 +.word 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 +.word 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 +.word 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 +.word 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 +.word 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 +.word 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 +.word 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 +.word 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 +.size K256,.-K256 +.word 0 @ terminator +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) +.LOPENSSL_armcap: +.word OPENSSL_armcap_P-sha256_block_data_order +#endif +.align 5 + +.global sha256_block_data_order +.type sha256_block_data_order,%function +sha256_block_data_order: +#if __ARM_ARCH__<7 + sub r3,pc,#8 @ sha256_block_data_order +#else + adr r3,sha256_block_data_order +#endif +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) + ldr r12,.LOPENSSL_armcap + ldr r12,[r3,r12] @ OPENSSL_armcap_P + tst r12,#ARMV8_SHA256 + bne .LARMv8 + tst r12,#ARMV7_NEON + bne .LNEON +#endif + add r2,r1,r2,lsl#6 @ len to point at the end of inp + stmdb sp!,{r0,r1,r2,r4-r11,lr} + ldmia r0,{r4,r5,r6,r7,r8,r9,r10,r11} + sub r14,r3,#256+32 @ K256 + sub sp,sp,#16*4 @ alloca(X[16]) +.Loop: +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 +# else + ldrb r2,[r1,#3] +# endif + eor r3,r5,r6 @ magic + eor r12,r12,r12 +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 0 +# if 0==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r8,r8,ror#5 + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r8,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 0 + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 0==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r8,r8,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r8,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r11,r11,r2 @ h+=X[i] + str r2,[sp,#0*4] + eor r2,r9,r10 + add r11,r11,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r8 + add r11,r11,r12 @ h+=K256[i] + eor r2,r2,r10 @ Ch(e,f,g) + eor r0,r4,r4,ror#11 + add r11,r11,r2 @ h+=Ch(e,f,g) +#if 0==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 0<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r4,r5 @ a^b, b^c in next round +#else + ldr r2,[sp,#2*4] @ from future BODY_16_xx + eor r12,r4,r5 @ a^b, b^c in next round + ldr r1,[sp,#15*4] @ from future BODY_16_xx +#endif + eor r0,r0,r4,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r7,r7,r11 @ d+=h + eor r3,r3,r5 @ Maj(a,b,c) + add r11,r11,r0,ror#2 @ h+=Sigma0(a) + @ add r11,r11,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 1 +# if 1==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r7,r7,ror#5 + add r11,r11,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r7,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 1 + add r11,r11,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 1==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r7,r7,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r7,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r10,r10,r2 @ h+=X[i] + str r2,[sp,#1*4] + eor r2,r8,r9 + add r10,r10,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r7 + add r10,r10,r3 @ h+=K256[i] + eor r2,r2,r9 @ Ch(e,f,g) + eor r0,r11,r11,ror#11 + add r10,r10,r2 @ h+=Ch(e,f,g) +#if 1==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 1<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r11,r4 @ a^b, b^c in next round +#else + ldr r2,[sp,#3*4] @ from future BODY_16_xx + eor r3,r11,r4 @ a^b, b^c in next round + ldr r1,[sp,#0*4] @ from future BODY_16_xx +#endif + eor r0,r0,r11,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r6,r6,r10 @ d+=h + eor r12,r12,r4 @ Maj(a,b,c) + add r10,r10,r0,ror#2 @ h+=Sigma0(a) + @ add r10,r10,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 2 +# if 2==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r6,r6,ror#5 + add r10,r10,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r6,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 2 + add r10,r10,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 2==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r6,r6,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r6,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r9,r9,r2 @ h+=X[i] + str r2,[sp,#2*4] + eor r2,r7,r8 + add r9,r9,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r6 + add r9,r9,r12 @ h+=K256[i] + eor r2,r2,r8 @ Ch(e,f,g) + eor r0,r10,r10,ror#11 + add r9,r9,r2 @ h+=Ch(e,f,g) +#if 2==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 2<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r10,r11 @ a^b, b^c in next round +#else + ldr r2,[sp,#4*4] @ from future BODY_16_xx + eor r12,r10,r11 @ a^b, b^c in next round + ldr r1,[sp,#1*4] @ from future BODY_16_xx +#endif + eor r0,r0,r10,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r5,r5,r9 @ d+=h + eor r3,r3,r11 @ Maj(a,b,c) + add r9,r9,r0,ror#2 @ h+=Sigma0(a) + @ add r9,r9,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 3 +# if 3==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r5,r5,ror#5 + add r9,r9,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r5,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 3 + add r9,r9,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 3==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r5,r5,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r5,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r8,r8,r2 @ h+=X[i] + str r2,[sp,#3*4] + eor r2,r6,r7 + add r8,r8,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r5 + add r8,r8,r3 @ h+=K256[i] + eor r2,r2,r7 @ Ch(e,f,g) + eor r0,r9,r9,ror#11 + add r8,r8,r2 @ h+=Ch(e,f,g) +#if 3==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 3<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r9,r10 @ a^b, b^c in next round +#else + ldr r2,[sp,#5*4] @ from future BODY_16_xx + eor r3,r9,r10 @ a^b, b^c in next round + ldr r1,[sp,#2*4] @ from future BODY_16_xx +#endif + eor r0,r0,r9,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r4,r4,r8 @ d+=h + eor r12,r12,r10 @ Maj(a,b,c) + add r8,r8,r0,ror#2 @ h+=Sigma0(a) + @ add r8,r8,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 4 +# if 4==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r4,r4,ror#5 + add r8,r8,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r4,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 4 + add r8,r8,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 4==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r4,r4,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r4,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r7,r7,r2 @ h+=X[i] + str r2,[sp,#4*4] + eor r2,r5,r6 + add r7,r7,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r4 + add r7,r7,r12 @ h+=K256[i] + eor r2,r2,r6 @ Ch(e,f,g) + eor r0,r8,r8,ror#11 + add r7,r7,r2 @ h+=Ch(e,f,g) +#if 4==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 4<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r8,r9 @ a^b, b^c in next round +#else + ldr r2,[sp,#6*4] @ from future BODY_16_xx + eor r12,r8,r9 @ a^b, b^c in next round + ldr r1,[sp,#3*4] @ from future BODY_16_xx +#endif + eor r0,r0,r8,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r11,r11,r7 @ d+=h + eor r3,r3,r9 @ Maj(a,b,c) + add r7,r7,r0,ror#2 @ h+=Sigma0(a) + @ add r7,r7,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 5 +# if 5==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r11,r11,ror#5 + add r7,r7,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r11,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 5 + add r7,r7,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 5==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r11,r11,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r11,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r6,r6,r2 @ h+=X[i] + str r2,[sp,#5*4] + eor r2,r4,r5 + add r6,r6,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r11 + add r6,r6,r3 @ h+=K256[i] + eor r2,r2,r5 @ Ch(e,f,g) + eor r0,r7,r7,ror#11 + add r6,r6,r2 @ h+=Ch(e,f,g) +#if 5==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 5<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r7,r8 @ a^b, b^c in next round +#else + ldr r2,[sp,#7*4] @ from future BODY_16_xx + eor r3,r7,r8 @ a^b, b^c in next round + ldr r1,[sp,#4*4] @ from future BODY_16_xx +#endif + eor r0,r0,r7,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r10,r10,r6 @ d+=h + eor r12,r12,r8 @ Maj(a,b,c) + add r6,r6,r0,ror#2 @ h+=Sigma0(a) + @ add r6,r6,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 6 +# if 6==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r10,r10,ror#5 + add r6,r6,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r10,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 6 + add r6,r6,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 6==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r10,r10,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r10,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r5,r5,r2 @ h+=X[i] + str r2,[sp,#6*4] + eor r2,r11,r4 + add r5,r5,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r10 + add r5,r5,r12 @ h+=K256[i] + eor r2,r2,r4 @ Ch(e,f,g) + eor r0,r6,r6,ror#11 + add r5,r5,r2 @ h+=Ch(e,f,g) +#if 6==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 6<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r6,r7 @ a^b, b^c in next round +#else + ldr r2,[sp,#8*4] @ from future BODY_16_xx + eor r12,r6,r7 @ a^b, b^c in next round + ldr r1,[sp,#5*4] @ from future BODY_16_xx +#endif + eor r0,r0,r6,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r9,r9,r5 @ d+=h + eor r3,r3,r7 @ Maj(a,b,c) + add r5,r5,r0,ror#2 @ h+=Sigma0(a) + @ add r5,r5,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 7 +# if 7==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r9,r9,ror#5 + add r5,r5,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r9,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 7 + add r5,r5,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 7==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r9,r9,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r9,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r4,r4,r2 @ h+=X[i] + str r2,[sp,#7*4] + eor r2,r10,r11 + add r4,r4,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r9 + add r4,r4,r3 @ h+=K256[i] + eor r2,r2,r11 @ Ch(e,f,g) + eor r0,r5,r5,ror#11 + add r4,r4,r2 @ h+=Ch(e,f,g) +#if 7==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 7<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r5,r6 @ a^b, b^c in next round +#else + ldr r2,[sp,#9*4] @ from future BODY_16_xx + eor r3,r5,r6 @ a^b, b^c in next round + ldr r1,[sp,#6*4] @ from future BODY_16_xx +#endif + eor r0,r0,r5,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r8,r8,r4 @ d+=h + eor r12,r12,r6 @ Maj(a,b,c) + add r4,r4,r0,ror#2 @ h+=Sigma0(a) + @ add r4,r4,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 8 +# if 8==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r8,r8,ror#5 + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r8,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 8 + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 8==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r8,r8,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r8,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r11,r11,r2 @ h+=X[i] + str r2,[sp,#8*4] + eor r2,r9,r10 + add r11,r11,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r8 + add r11,r11,r12 @ h+=K256[i] + eor r2,r2,r10 @ Ch(e,f,g) + eor r0,r4,r4,ror#11 + add r11,r11,r2 @ h+=Ch(e,f,g) +#if 8==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 8<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r4,r5 @ a^b, b^c in next round +#else + ldr r2,[sp,#10*4] @ from future BODY_16_xx + eor r12,r4,r5 @ a^b, b^c in next round + ldr r1,[sp,#7*4] @ from future BODY_16_xx +#endif + eor r0,r0,r4,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r7,r7,r11 @ d+=h + eor r3,r3,r5 @ Maj(a,b,c) + add r11,r11,r0,ror#2 @ h+=Sigma0(a) + @ add r11,r11,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 9 +# if 9==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r7,r7,ror#5 + add r11,r11,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r7,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 9 + add r11,r11,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 9==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r7,r7,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r7,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r10,r10,r2 @ h+=X[i] + str r2,[sp,#9*4] + eor r2,r8,r9 + add r10,r10,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r7 + add r10,r10,r3 @ h+=K256[i] + eor r2,r2,r9 @ Ch(e,f,g) + eor r0,r11,r11,ror#11 + add r10,r10,r2 @ h+=Ch(e,f,g) +#if 9==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 9<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r11,r4 @ a^b, b^c in next round +#else + ldr r2,[sp,#11*4] @ from future BODY_16_xx + eor r3,r11,r4 @ a^b, b^c in next round + ldr r1,[sp,#8*4] @ from future BODY_16_xx +#endif + eor r0,r0,r11,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r6,r6,r10 @ d+=h + eor r12,r12,r4 @ Maj(a,b,c) + add r10,r10,r0,ror#2 @ h+=Sigma0(a) + @ add r10,r10,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 10 +# if 10==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r6,r6,ror#5 + add r10,r10,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r6,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 10 + add r10,r10,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 10==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r6,r6,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r6,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r9,r9,r2 @ h+=X[i] + str r2,[sp,#10*4] + eor r2,r7,r8 + add r9,r9,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r6 + add r9,r9,r12 @ h+=K256[i] + eor r2,r2,r8 @ Ch(e,f,g) + eor r0,r10,r10,ror#11 + add r9,r9,r2 @ h+=Ch(e,f,g) +#if 10==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 10<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r10,r11 @ a^b, b^c in next round +#else + ldr r2,[sp,#12*4] @ from future BODY_16_xx + eor r12,r10,r11 @ a^b, b^c in next round + ldr r1,[sp,#9*4] @ from future BODY_16_xx +#endif + eor r0,r0,r10,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r5,r5,r9 @ d+=h + eor r3,r3,r11 @ Maj(a,b,c) + add r9,r9,r0,ror#2 @ h+=Sigma0(a) + @ add r9,r9,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 11 +# if 11==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r5,r5,ror#5 + add r9,r9,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r5,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 11 + add r9,r9,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 11==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r5,r5,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r5,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r8,r8,r2 @ h+=X[i] + str r2,[sp,#11*4] + eor r2,r6,r7 + add r8,r8,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r5 + add r8,r8,r3 @ h+=K256[i] + eor r2,r2,r7 @ Ch(e,f,g) + eor r0,r9,r9,ror#11 + add r8,r8,r2 @ h+=Ch(e,f,g) +#if 11==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 11<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r9,r10 @ a^b, b^c in next round +#else + ldr r2,[sp,#13*4] @ from future BODY_16_xx + eor r3,r9,r10 @ a^b, b^c in next round + ldr r1,[sp,#10*4] @ from future BODY_16_xx +#endif + eor r0,r0,r9,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r4,r4,r8 @ d+=h + eor r12,r12,r10 @ Maj(a,b,c) + add r8,r8,r0,ror#2 @ h+=Sigma0(a) + @ add r8,r8,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 12 +# if 12==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r4,r4,ror#5 + add r8,r8,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r4,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 12 + add r8,r8,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 12==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r4,r4,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r4,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r7,r7,r2 @ h+=X[i] + str r2,[sp,#12*4] + eor r2,r5,r6 + add r7,r7,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r4 + add r7,r7,r12 @ h+=K256[i] + eor r2,r2,r6 @ Ch(e,f,g) + eor r0,r8,r8,ror#11 + add r7,r7,r2 @ h+=Ch(e,f,g) +#if 12==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 12<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r8,r9 @ a^b, b^c in next round +#else + ldr r2,[sp,#14*4] @ from future BODY_16_xx + eor r12,r8,r9 @ a^b, b^c in next round + ldr r1,[sp,#11*4] @ from future BODY_16_xx +#endif + eor r0,r0,r8,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r11,r11,r7 @ d+=h + eor r3,r3,r9 @ Maj(a,b,c) + add r7,r7,r0,ror#2 @ h+=Sigma0(a) + @ add r7,r7,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 13 +# if 13==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r11,r11,ror#5 + add r7,r7,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r11,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 13 + add r7,r7,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 13==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r11,r11,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r11,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r6,r6,r2 @ h+=X[i] + str r2,[sp,#13*4] + eor r2,r4,r5 + add r6,r6,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r11 + add r6,r6,r3 @ h+=K256[i] + eor r2,r2,r5 @ Ch(e,f,g) + eor r0,r7,r7,ror#11 + add r6,r6,r2 @ h+=Ch(e,f,g) +#if 13==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 13<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r7,r8 @ a^b, b^c in next round +#else + ldr r2,[sp,#15*4] @ from future BODY_16_xx + eor r3,r7,r8 @ a^b, b^c in next round + ldr r1,[sp,#12*4] @ from future BODY_16_xx +#endif + eor r0,r0,r7,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r10,r10,r6 @ d+=h + eor r12,r12,r8 @ Maj(a,b,c) + add r6,r6,r0,ror#2 @ h+=Sigma0(a) + @ add r6,r6,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 14 +# if 14==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r10,r10,ror#5 + add r6,r6,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r10,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 14 + add r6,r6,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 14==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r10,r10,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r10,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r5,r5,r2 @ h+=X[i] + str r2,[sp,#14*4] + eor r2,r11,r4 + add r5,r5,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r10 + add r5,r5,r12 @ h+=K256[i] + eor r2,r2,r4 @ Ch(e,f,g) + eor r0,r6,r6,ror#11 + add r5,r5,r2 @ h+=Ch(e,f,g) +#if 14==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 14<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r6,r7 @ a^b, b^c in next round +#else + ldr r2,[sp,#0*4] @ from future BODY_16_xx + eor r12,r6,r7 @ a^b, b^c in next round + ldr r1,[sp,#13*4] @ from future BODY_16_xx +#endif + eor r0,r0,r6,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r9,r9,r5 @ d+=h + eor r3,r3,r7 @ Maj(a,b,c) + add r5,r5,r0,ror#2 @ h+=Sigma0(a) + @ add r5,r5,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 15 +# if 15==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r9,r9,ror#5 + add r5,r5,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r9,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 15 + add r5,r5,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 15==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r9,r9,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r9,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r4,r4,r2 @ h+=X[i] + str r2,[sp,#15*4] + eor r2,r10,r11 + add r4,r4,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r9 + add r4,r4,r3 @ h+=K256[i] + eor r2,r2,r11 @ Ch(e,f,g) + eor r0,r5,r5,ror#11 + add r4,r4,r2 @ h+=Ch(e,f,g) +#if 15==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 15<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r5,r6 @ a^b, b^c in next round +#else + ldr r2,[sp,#1*4] @ from future BODY_16_xx + eor r3,r5,r6 @ a^b, b^c in next round + ldr r1,[sp,#14*4] @ from future BODY_16_xx +#endif + eor r0,r0,r5,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r8,r8,r4 @ d+=h + eor r12,r12,r6 @ Maj(a,b,c) + add r4,r4,r0,ror#2 @ h+=Sigma0(a) + @ add r4,r4,r12 @ h+=Maj(a,b,c) +.Lrounds_16_xx: + @ ldr r2,[sp,#1*4] @ 16 + @ ldr r1,[sp,#14*4] + mov r0,r2,ror#7 + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#0*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#9*4] + + add r12,r12,r0 + eor r0,r8,r8,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r8,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r11,r11,r2 @ h+=X[i] + str r2,[sp,#0*4] + eor r2,r9,r10 + add r11,r11,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r8 + add r11,r11,r12 @ h+=K256[i] + eor r2,r2,r10 @ Ch(e,f,g) + eor r0,r4,r4,ror#11 + add r11,r11,r2 @ h+=Ch(e,f,g) +#if 16==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 16<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r4,r5 @ a^b, b^c in next round +#else + ldr r2,[sp,#2*4] @ from future BODY_16_xx + eor r12,r4,r5 @ a^b, b^c in next round + ldr r1,[sp,#15*4] @ from future BODY_16_xx +#endif + eor r0,r0,r4,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r7,r7,r11 @ d+=h + eor r3,r3,r5 @ Maj(a,b,c) + add r11,r11,r0,ror#2 @ h+=Sigma0(a) + @ add r11,r11,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#2*4] @ 17 + @ ldr r1,[sp,#15*4] + mov r0,r2,ror#7 + add r11,r11,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#1*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#10*4] + + add r3,r3,r0 + eor r0,r7,r7,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r7,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r10,r10,r2 @ h+=X[i] + str r2,[sp,#1*4] + eor r2,r8,r9 + add r10,r10,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r7 + add r10,r10,r3 @ h+=K256[i] + eor r2,r2,r9 @ Ch(e,f,g) + eor r0,r11,r11,ror#11 + add r10,r10,r2 @ h+=Ch(e,f,g) +#if 17==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 17<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r11,r4 @ a^b, b^c in next round +#else + ldr r2,[sp,#3*4] @ from future BODY_16_xx + eor r3,r11,r4 @ a^b, b^c in next round + ldr r1,[sp,#0*4] @ from future BODY_16_xx +#endif + eor r0,r0,r11,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r6,r6,r10 @ d+=h + eor r12,r12,r4 @ Maj(a,b,c) + add r10,r10,r0,ror#2 @ h+=Sigma0(a) + @ add r10,r10,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#3*4] @ 18 + @ ldr r1,[sp,#0*4] + mov r0,r2,ror#7 + add r10,r10,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#2*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#11*4] + + add r12,r12,r0 + eor r0,r6,r6,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r6,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r9,r9,r2 @ h+=X[i] + str r2,[sp,#2*4] + eor r2,r7,r8 + add r9,r9,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r6 + add r9,r9,r12 @ h+=K256[i] + eor r2,r2,r8 @ Ch(e,f,g) + eor r0,r10,r10,ror#11 + add r9,r9,r2 @ h+=Ch(e,f,g) +#if 18==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 18<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r10,r11 @ a^b, b^c in next round +#else + ldr r2,[sp,#4*4] @ from future BODY_16_xx + eor r12,r10,r11 @ a^b, b^c in next round + ldr r1,[sp,#1*4] @ from future BODY_16_xx +#endif + eor r0,r0,r10,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r5,r5,r9 @ d+=h + eor r3,r3,r11 @ Maj(a,b,c) + add r9,r9,r0,ror#2 @ h+=Sigma0(a) + @ add r9,r9,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#4*4] @ 19 + @ ldr r1,[sp,#1*4] + mov r0,r2,ror#7 + add r9,r9,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#3*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#12*4] + + add r3,r3,r0 + eor r0,r5,r5,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r5,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r8,r8,r2 @ h+=X[i] + str r2,[sp,#3*4] + eor r2,r6,r7 + add r8,r8,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r5 + add r8,r8,r3 @ h+=K256[i] + eor r2,r2,r7 @ Ch(e,f,g) + eor r0,r9,r9,ror#11 + add r8,r8,r2 @ h+=Ch(e,f,g) +#if 19==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 19<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r9,r10 @ a^b, b^c in next round +#else + ldr r2,[sp,#5*4] @ from future BODY_16_xx + eor r3,r9,r10 @ a^b, b^c in next round + ldr r1,[sp,#2*4] @ from future BODY_16_xx +#endif + eor r0,r0,r9,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r4,r4,r8 @ d+=h + eor r12,r12,r10 @ Maj(a,b,c) + add r8,r8,r0,ror#2 @ h+=Sigma0(a) + @ add r8,r8,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#5*4] @ 20 + @ ldr r1,[sp,#2*4] + mov r0,r2,ror#7 + add r8,r8,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#4*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#13*4] + + add r12,r12,r0 + eor r0,r4,r4,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r4,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r7,r7,r2 @ h+=X[i] + str r2,[sp,#4*4] + eor r2,r5,r6 + add r7,r7,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r4 + add r7,r7,r12 @ h+=K256[i] + eor r2,r2,r6 @ Ch(e,f,g) + eor r0,r8,r8,ror#11 + add r7,r7,r2 @ h+=Ch(e,f,g) +#if 20==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 20<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r8,r9 @ a^b, b^c in next round +#else + ldr r2,[sp,#6*4] @ from future BODY_16_xx + eor r12,r8,r9 @ a^b, b^c in next round + ldr r1,[sp,#3*4] @ from future BODY_16_xx +#endif + eor r0,r0,r8,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r11,r11,r7 @ d+=h + eor r3,r3,r9 @ Maj(a,b,c) + add r7,r7,r0,ror#2 @ h+=Sigma0(a) + @ add r7,r7,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#6*4] @ 21 + @ ldr r1,[sp,#3*4] + mov r0,r2,ror#7 + add r7,r7,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#5*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#14*4] + + add r3,r3,r0 + eor r0,r11,r11,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r11,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r6,r6,r2 @ h+=X[i] + str r2,[sp,#5*4] + eor r2,r4,r5 + add r6,r6,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r11 + add r6,r6,r3 @ h+=K256[i] + eor r2,r2,r5 @ Ch(e,f,g) + eor r0,r7,r7,ror#11 + add r6,r6,r2 @ h+=Ch(e,f,g) +#if 21==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 21<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r7,r8 @ a^b, b^c in next round +#else + ldr r2,[sp,#7*4] @ from future BODY_16_xx + eor r3,r7,r8 @ a^b, b^c in next round + ldr r1,[sp,#4*4] @ from future BODY_16_xx +#endif + eor r0,r0,r7,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r10,r10,r6 @ d+=h + eor r12,r12,r8 @ Maj(a,b,c) + add r6,r6,r0,ror#2 @ h+=Sigma0(a) + @ add r6,r6,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#7*4] @ 22 + @ ldr r1,[sp,#4*4] + mov r0,r2,ror#7 + add r6,r6,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#6*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#15*4] + + add r12,r12,r0 + eor r0,r10,r10,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r10,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r5,r5,r2 @ h+=X[i] + str r2,[sp,#6*4] + eor r2,r11,r4 + add r5,r5,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r10 + add r5,r5,r12 @ h+=K256[i] + eor r2,r2,r4 @ Ch(e,f,g) + eor r0,r6,r6,ror#11 + add r5,r5,r2 @ h+=Ch(e,f,g) +#if 22==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 22<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r6,r7 @ a^b, b^c in next round +#else + ldr r2,[sp,#8*4] @ from future BODY_16_xx + eor r12,r6,r7 @ a^b, b^c in next round + ldr r1,[sp,#5*4] @ from future BODY_16_xx +#endif + eor r0,r0,r6,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r9,r9,r5 @ d+=h + eor r3,r3,r7 @ Maj(a,b,c) + add r5,r5,r0,ror#2 @ h+=Sigma0(a) + @ add r5,r5,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#8*4] @ 23 + @ ldr r1,[sp,#5*4] + mov r0,r2,ror#7 + add r5,r5,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#7*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#0*4] + + add r3,r3,r0 + eor r0,r9,r9,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r9,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r4,r4,r2 @ h+=X[i] + str r2,[sp,#7*4] + eor r2,r10,r11 + add r4,r4,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r9 + add r4,r4,r3 @ h+=K256[i] + eor r2,r2,r11 @ Ch(e,f,g) + eor r0,r5,r5,ror#11 + add r4,r4,r2 @ h+=Ch(e,f,g) +#if 23==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 23<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r5,r6 @ a^b, b^c in next round +#else + ldr r2,[sp,#9*4] @ from future BODY_16_xx + eor r3,r5,r6 @ a^b, b^c in next round + ldr r1,[sp,#6*4] @ from future BODY_16_xx +#endif + eor r0,r0,r5,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r8,r8,r4 @ d+=h + eor r12,r12,r6 @ Maj(a,b,c) + add r4,r4,r0,ror#2 @ h+=Sigma0(a) + @ add r4,r4,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#9*4] @ 24 + @ ldr r1,[sp,#6*4] + mov r0,r2,ror#7 + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#8*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#1*4] + + add r12,r12,r0 + eor r0,r8,r8,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r8,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r11,r11,r2 @ h+=X[i] + str r2,[sp,#8*4] + eor r2,r9,r10 + add r11,r11,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r8 + add r11,r11,r12 @ h+=K256[i] + eor r2,r2,r10 @ Ch(e,f,g) + eor r0,r4,r4,ror#11 + add r11,r11,r2 @ h+=Ch(e,f,g) +#if 24==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 24<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r4,r5 @ a^b, b^c in next round +#else + ldr r2,[sp,#10*4] @ from future BODY_16_xx + eor r12,r4,r5 @ a^b, b^c in next round + ldr r1,[sp,#7*4] @ from future BODY_16_xx +#endif + eor r0,r0,r4,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r7,r7,r11 @ d+=h + eor r3,r3,r5 @ Maj(a,b,c) + add r11,r11,r0,ror#2 @ h+=Sigma0(a) + @ add r11,r11,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#10*4] @ 25 + @ ldr r1,[sp,#7*4] + mov r0,r2,ror#7 + add r11,r11,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#9*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#2*4] + + add r3,r3,r0 + eor r0,r7,r7,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r7,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r10,r10,r2 @ h+=X[i] + str r2,[sp,#9*4] + eor r2,r8,r9 + add r10,r10,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r7 + add r10,r10,r3 @ h+=K256[i] + eor r2,r2,r9 @ Ch(e,f,g) + eor r0,r11,r11,ror#11 + add r10,r10,r2 @ h+=Ch(e,f,g) +#if 25==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 25<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r11,r4 @ a^b, b^c in next round +#else + ldr r2,[sp,#11*4] @ from future BODY_16_xx + eor r3,r11,r4 @ a^b, b^c in next round + ldr r1,[sp,#8*4] @ from future BODY_16_xx +#endif + eor r0,r0,r11,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r6,r6,r10 @ d+=h + eor r12,r12,r4 @ Maj(a,b,c) + add r10,r10,r0,ror#2 @ h+=Sigma0(a) + @ add r10,r10,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#11*4] @ 26 + @ ldr r1,[sp,#8*4] + mov r0,r2,ror#7 + add r10,r10,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#10*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#3*4] + + add r12,r12,r0 + eor r0,r6,r6,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r6,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r9,r9,r2 @ h+=X[i] + str r2,[sp,#10*4] + eor r2,r7,r8 + add r9,r9,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r6 + add r9,r9,r12 @ h+=K256[i] + eor r2,r2,r8 @ Ch(e,f,g) + eor r0,r10,r10,ror#11 + add r9,r9,r2 @ h+=Ch(e,f,g) +#if 26==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 26<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r10,r11 @ a^b, b^c in next round +#else + ldr r2,[sp,#12*4] @ from future BODY_16_xx + eor r12,r10,r11 @ a^b, b^c in next round + ldr r1,[sp,#9*4] @ from future BODY_16_xx +#endif + eor r0,r0,r10,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r5,r5,r9 @ d+=h + eor r3,r3,r11 @ Maj(a,b,c) + add r9,r9,r0,ror#2 @ h+=Sigma0(a) + @ add r9,r9,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#12*4] @ 27 + @ ldr r1,[sp,#9*4] + mov r0,r2,ror#7 + add r9,r9,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#11*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#4*4] + + add r3,r3,r0 + eor r0,r5,r5,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r5,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r8,r8,r2 @ h+=X[i] + str r2,[sp,#11*4] + eor r2,r6,r7 + add r8,r8,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r5 + add r8,r8,r3 @ h+=K256[i] + eor r2,r2,r7 @ Ch(e,f,g) + eor r0,r9,r9,ror#11 + add r8,r8,r2 @ h+=Ch(e,f,g) +#if 27==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 27<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r9,r10 @ a^b, b^c in next round +#else + ldr r2,[sp,#13*4] @ from future BODY_16_xx + eor r3,r9,r10 @ a^b, b^c in next round + ldr r1,[sp,#10*4] @ from future BODY_16_xx +#endif + eor r0,r0,r9,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r4,r4,r8 @ d+=h + eor r12,r12,r10 @ Maj(a,b,c) + add r8,r8,r0,ror#2 @ h+=Sigma0(a) + @ add r8,r8,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#13*4] @ 28 + @ ldr r1,[sp,#10*4] + mov r0,r2,ror#7 + add r8,r8,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#12*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#5*4] + + add r12,r12,r0 + eor r0,r4,r4,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r4,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r7,r7,r2 @ h+=X[i] + str r2,[sp,#12*4] + eor r2,r5,r6 + add r7,r7,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r4 + add r7,r7,r12 @ h+=K256[i] + eor r2,r2,r6 @ Ch(e,f,g) + eor r0,r8,r8,ror#11 + add r7,r7,r2 @ h+=Ch(e,f,g) +#if 28==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 28<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r8,r9 @ a^b, b^c in next round +#else + ldr r2,[sp,#14*4] @ from future BODY_16_xx + eor r12,r8,r9 @ a^b, b^c in next round + ldr r1,[sp,#11*4] @ from future BODY_16_xx +#endif + eor r0,r0,r8,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r11,r11,r7 @ d+=h + eor r3,r3,r9 @ Maj(a,b,c) + add r7,r7,r0,ror#2 @ h+=Sigma0(a) + @ add r7,r7,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#14*4] @ 29 + @ ldr r1,[sp,#11*4] + mov r0,r2,ror#7 + add r7,r7,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#13*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#6*4] + + add r3,r3,r0 + eor r0,r11,r11,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r11,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r6,r6,r2 @ h+=X[i] + str r2,[sp,#13*4] + eor r2,r4,r5 + add r6,r6,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r11 + add r6,r6,r3 @ h+=K256[i] + eor r2,r2,r5 @ Ch(e,f,g) + eor r0,r7,r7,ror#11 + add r6,r6,r2 @ h+=Ch(e,f,g) +#if 29==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 29<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r7,r8 @ a^b, b^c in next round +#else + ldr r2,[sp,#15*4] @ from future BODY_16_xx + eor r3,r7,r8 @ a^b, b^c in next round + ldr r1,[sp,#12*4] @ from future BODY_16_xx +#endif + eor r0,r0,r7,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r10,r10,r6 @ d+=h + eor r12,r12,r8 @ Maj(a,b,c) + add r6,r6,r0,ror#2 @ h+=Sigma0(a) + @ add r6,r6,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#15*4] @ 30 + @ ldr r1,[sp,#12*4] + mov r0,r2,ror#7 + add r6,r6,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#14*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#7*4] + + add r12,r12,r0 + eor r0,r10,r10,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r10,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r5,r5,r2 @ h+=X[i] + str r2,[sp,#14*4] + eor r2,r11,r4 + add r5,r5,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r10 + add r5,r5,r12 @ h+=K256[i] + eor r2,r2,r4 @ Ch(e,f,g) + eor r0,r6,r6,ror#11 + add r5,r5,r2 @ h+=Ch(e,f,g) +#if 30==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 30<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r6,r7 @ a^b, b^c in next round +#else + ldr r2,[sp,#0*4] @ from future BODY_16_xx + eor r12,r6,r7 @ a^b, b^c in next round + ldr r1,[sp,#13*4] @ from future BODY_16_xx +#endif + eor r0,r0,r6,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r9,r9,r5 @ d+=h + eor r3,r3,r7 @ Maj(a,b,c) + add r5,r5,r0,ror#2 @ h+=Sigma0(a) + @ add r5,r5,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#0*4] @ 31 + @ ldr r1,[sp,#13*4] + mov r0,r2,ror#7 + add r5,r5,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#15*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#8*4] + + add r3,r3,r0 + eor r0,r9,r9,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r9,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r4,r4,r2 @ h+=X[i] + str r2,[sp,#15*4] + eor r2,r10,r11 + add r4,r4,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r9 + add r4,r4,r3 @ h+=K256[i] + eor r2,r2,r11 @ Ch(e,f,g) + eor r0,r5,r5,ror#11 + add r4,r4,r2 @ h+=Ch(e,f,g) +#if 31==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 31<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r5,r6 @ a^b, b^c in next round +#else + ldr r2,[sp,#1*4] @ from future BODY_16_xx + eor r3,r5,r6 @ a^b, b^c in next round + ldr r1,[sp,#14*4] @ from future BODY_16_xx +#endif + eor r0,r0,r5,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r8,r8,r4 @ d+=h + eor r12,r12,r6 @ Maj(a,b,c) + add r4,r4,r0,ror#2 @ h+=Sigma0(a) + @ add r4,r4,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + ite eq @ Thumb2 thing, sanity check in ARM +#endif + ldreq r3,[sp,#16*4] @ pull ctx + bne .Lrounds_16_xx + + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + ldr r0,[r3,#0] + ldr r2,[r3,#4] + ldr r12,[r3,#8] + add r4,r4,r0 + ldr r0,[r3,#12] + add r5,r5,r2 + ldr r2,[r3,#16] + add r6,r6,r12 + ldr r12,[r3,#20] + add r7,r7,r0 + ldr r0,[r3,#24] + add r8,r8,r2 + ldr r2,[r3,#28] + add r9,r9,r12 + ldr r1,[sp,#17*4] @ pull inp + ldr r12,[sp,#18*4] @ pull inp+len + add r10,r10,r0 + add r11,r11,r2 + stmia r3,{r4,r5,r6,r7,r8,r9,r10,r11} + cmp r1,r12 + sub r14,r14,#256 @ rewind Ktbl + bne .Loop + + add sp,sp,#19*4 @ destroy frame +#if __ARM_ARCH__>=5 + ldmia sp!,{r4-r11,pc} +#else + ldmia sp!,{r4-r11,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +#endif +.size sha256_block_data_order,.-sha256_block_data_order +#if __ARM_MAX_ARCH__>=7 +.arch armv7-a +.fpu neon + +.global sha256_block_data_order_neon +.type sha256_block_data_order_neon,%function +.align 4 +sha256_block_data_order_neon: +.LNEON: + stmdb sp!,{r4-r12,lr} + + sub r11,sp,#16*4+16 + adrl r14,K256 + bic r11,r11,#15 @ align for 128-bit stores + mov r12,sp + mov sp,r11 @ alloca + add r2,r1,r2,lsl#6 @ len to point at the end of inp + + vld1.8 {q0},[r1]! + vld1.8 {q1},[r1]! + vld1.8 {q2},[r1]! + vld1.8 {q3},[r1]! + vld1.32 {q8},[r14,:128]! + vld1.32 {q9},[r14,:128]! + vld1.32 {q10},[r14,:128]! + vld1.32 {q11},[r14,:128]! + vrev32.8 q0,q0 @ yes, even on + str r0,[sp,#64] + vrev32.8 q1,q1 @ big-endian + str r1,[sp,#68] + mov r1,sp + vrev32.8 q2,q2 + str r2,[sp,#72] + vrev32.8 q3,q3 + str r12,[sp,#76] @ save original sp + vadd.i32 q8,q8,q0 + vadd.i32 q9,q9,q1 + vst1.32 {q8},[r1,:128]! + vadd.i32 q10,q10,q2 + vst1.32 {q9},[r1,:128]! + vadd.i32 q11,q11,q3 + vst1.32 {q10},[r1,:128]! + vst1.32 {q11},[r1,:128]! + + ldmia r0,{r4-r11} + sub r1,r1,#64 + ldr r2,[sp,#0] + eor r12,r12,r12 + eor r3,r5,r6 + b .L_00_48 + +.align 4 +.L_00_48: + vext.8 q8,q0,q1,#4 + add r11,r11,r2 + eor r2,r9,r10 + eor r0,r8,r8,ror#5 + vext.8 q9,q2,q3,#4 + add r4,r4,r12 + and r2,r2,r8 + eor r12,r0,r8,ror#19 + vshr.u32 q10,q8,#7 + eor r0,r4,r4,ror#11 + eor r2,r2,r10 + vadd.i32 q0,q0,q9 + add r11,r11,r12,ror#6 + eor r12,r4,r5 + vshr.u32 q9,q8,#3 + eor r0,r0,r4,ror#20 + add r11,r11,r2 + vsli.32 q10,q8,#25 + ldr r2,[sp,#4] + and r3,r3,r12 + vshr.u32 q11,q8,#18 + add r7,r7,r11 + add r11,r11,r0,ror#2 + eor r3,r3,r5 + veor q9,q9,q10 + add r10,r10,r2 + vsli.32 q11,q8,#14 + eor r2,r8,r9 + eor r0,r7,r7,ror#5 + vshr.u32 d24,d7,#17 + add r11,r11,r3 + and r2,r2,r7 + veor q9,q9,q11 + eor r3,r0,r7,ror#19 + eor r0,r11,r11,ror#11 + vsli.32 d24,d7,#15 + eor r2,r2,r9 + add r10,r10,r3,ror#6 + vshr.u32 d25,d7,#10 + eor r3,r11,r4 + eor r0,r0,r11,ror#20 + vadd.i32 q0,q0,q9 + add r10,r10,r2 + ldr r2,[sp,#8] + veor d25,d25,d24 + and r12,r12,r3 + add r6,r6,r10 + vshr.u32 d24,d7,#19 + add r10,r10,r0,ror#2 + eor r12,r12,r4 + vsli.32 d24,d7,#13 + add r9,r9,r2 + eor r2,r7,r8 + veor d25,d25,d24 + eor r0,r6,r6,ror#5 + add r10,r10,r12 + vadd.i32 d0,d0,d25 + and r2,r2,r6 + eor r12,r0,r6,ror#19 + vshr.u32 d24,d0,#17 + eor r0,r10,r10,ror#11 + eor r2,r2,r8 + vsli.32 d24,d0,#15 + add r9,r9,r12,ror#6 + eor r12,r10,r11 + vshr.u32 d25,d0,#10 + eor r0,r0,r10,ror#20 + add r9,r9,r2 + veor d25,d25,d24 + ldr r2,[sp,#12] + and r3,r3,r12 + vshr.u32 d24,d0,#19 + add r5,r5,r9 + add r9,r9,r0,ror#2 + eor r3,r3,r11 + vld1.32 {q8},[r14,:128]! + add r8,r8,r2 + vsli.32 d24,d0,#13 + eor r2,r6,r7 + eor r0,r5,r5,ror#5 + veor d25,d25,d24 + add r9,r9,r3 + and r2,r2,r5 + vadd.i32 d1,d1,d25 + eor r3,r0,r5,ror#19 + eor r0,r9,r9,ror#11 + vadd.i32 q8,q8,q0 + eor r2,r2,r7 + add r8,r8,r3,ror#6 + eor r3,r9,r10 + eor r0,r0,r9,ror#20 + add r8,r8,r2 + ldr r2,[sp,#16] + and r12,r12,r3 + add r4,r4,r8 + vst1.32 {q8},[r1,:128]! + add r8,r8,r0,ror#2 + eor r12,r12,r10 + vext.8 q8,q1,q2,#4 + add r7,r7,r2 + eor r2,r5,r6 + eor r0,r4,r4,ror#5 + vext.8 q9,q3,q0,#4 + add r8,r8,r12 + and r2,r2,r4 + eor r12,r0,r4,ror#19 + vshr.u32 q10,q8,#7 + eor r0,r8,r8,ror#11 + eor r2,r2,r6 + vadd.i32 q1,q1,q9 + add r7,r7,r12,ror#6 + eor r12,r8,r9 + vshr.u32 q9,q8,#3 + eor r0,r0,r8,ror#20 + add r7,r7,r2 + vsli.32 q10,q8,#25 + ldr r2,[sp,#20] + and r3,r3,r12 + vshr.u32 q11,q8,#18 + add r11,r11,r7 + add r7,r7,r0,ror#2 + eor r3,r3,r9 + veor q9,q9,q10 + add r6,r6,r2 + vsli.32 q11,q8,#14 + eor r2,r4,r5 + eor r0,r11,r11,ror#5 + vshr.u32 d24,d1,#17 + add r7,r7,r3 + and r2,r2,r11 + veor q9,q9,q11 + eor r3,r0,r11,ror#19 + eor r0,r7,r7,ror#11 + vsli.32 d24,d1,#15 + eor r2,r2,r5 + add r6,r6,r3,ror#6 + vshr.u32 d25,d1,#10 + eor r3,r7,r8 + eor r0,r0,r7,ror#20 + vadd.i32 q1,q1,q9 + add r6,r6,r2 + ldr r2,[sp,#24] + veor d25,d25,d24 + and r12,r12,r3 + add r10,r10,r6 + vshr.u32 d24,d1,#19 + add r6,r6,r0,ror#2 + eor r12,r12,r8 + vsli.32 d24,d1,#13 + add r5,r5,r2 + eor r2,r11,r4 + veor d25,d25,d24 + eor r0,r10,r10,ror#5 + add r6,r6,r12 + vadd.i32 d2,d2,d25 + and r2,r2,r10 + eor r12,r0,r10,ror#19 + vshr.u32 d24,d2,#17 + eor r0,r6,r6,ror#11 + eor r2,r2,r4 + vsli.32 d24,d2,#15 + add r5,r5,r12,ror#6 + eor r12,r6,r7 + vshr.u32 d25,d2,#10 + eor r0,r0,r6,ror#20 + add r5,r5,r2 + veor d25,d25,d24 + ldr r2,[sp,#28] + and r3,r3,r12 + vshr.u32 d24,d2,#19 + add r9,r9,r5 + add r5,r5,r0,ror#2 + eor r3,r3,r7 + vld1.32 {q8},[r14,:128]! + add r4,r4,r2 + vsli.32 d24,d2,#13 + eor r2,r10,r11 + eor r0,r9,r9,ror#5 + veor d25,d25,d24 + add r5,r5,r3 + and r2,r2,r9 + vadd.i32 d3,d3,d25 + eor r3,r0,r9,ror#19 + eor r0,r5,r5,ror#11 + vadd.i32 q8,q8,q1 + eor r2,r2,r11 + add r4,r4,r3,ror#6 + eor r3,r5,r6 + eor r0,r0,r5,ror#20 + add r4,r4,r2 + ldr r2,[sp,#32] + and r12,r12,r3 + add r8,r8,r4 + vst1.32 {q8},[r1,:128]! + add r4,r4,r0,ror#2 + eor r12,r12,r6 + vext.8 q8,q2,q3,#4 + add r11,r11,r2 + eor r2,r9,r10 + eor r0,r8,r8,ror#5 + vext.8 q9,q0,q1,#4 + add r4,r4,r12 + and r2,r2,r8 + eor r12,r0,r8,ror#19 + vshr.u32 q10,q8,#7 + eor r0,r4,r4,ror#11 + eor r2,r2,r10 + vadd.i32 q2,q2,q9 + add r11,r11,r12,ror#6 + eor r12,r4,r5 + vshr.u32 q9,q8,#3 + eor r0,r0,r4,ror#20 + add r11,r11,r2 + vsli.32 q10,q8,#25 + ldr r2,[sp,#36] + and r3,r3,r12 + vshr.u32 q11,q8,#18 + add r7,r7,r11 + add r11,r11,r0,ror#2 + eor r3,r3,r5 + veor q9,q9,q10 + add r10,r10,r2 + vsli.32 q11,q8,#14 + eor r2,r8,r9 + eor r0,r7,r7,ror#5 + vshr.u32 d24,d3,#17 + add r11,r11,r3 + and r2,r2,r7 + veor q9,q9,q11 + eor r3,r0,r7,ror#19 + eor r0,r11,r11,ror#11 + vsli.32 d24,d3,#15 + eor r2,r2,r9 + add r10,r10,r3,ror#6 + vshr.u32 d25,d3,#10 + eor r3,r11,r4 + eor r0,r0,r11,ror#20 + vadd.i32 q2,q2,q9 + add r10,r10,r2 + ldr r2,[sp,#40] + veor d25,d25,d24 + and r12,r12,r3 + add r6,r6,r10 + vshr.u32 d24,d3,#19 + add r10,r10,r0,ror#2 + eor r12,r12,r4 + vsli.32 d24,d3,#13 + add r9,r9,r2 + eor r2,r7,r8 + veor d25,d25,d24 + eor r0,r6,r6,ror#5 + add r10,r10,r12 + vadd.i32 d4,d4,d25 + and r2,r2,r6 + eor r12,r0,r6,ror#19 + vshr.u32 d24,d4,#17 + eor r0,r10,r10,ror#11 + eor r2,r2,r8 + vsli.32 d24,d4,#15 + add r9,r9,r12,ror#6 + eor r12,r10,r11 + vshr.u32 d25,d4,#10 + eor r0,r0,r10,ror#20 + add r9,r9,r2 + veor d25,d25,d24 + ldr r2,[sp,#44] + and r3,r3,r12 + vshr.u32 d24,d4,#19 + add r5,r5,r9 + add r9,r9,r0,ror#2 + eor r3,r3,r11 + vld1.32 {q8},[r14,:128]! + add r8,r8,r2 + vsli.32 d24,d4,#13 + eor r2,r6,r7 + eor r0,r5,r5,ror#5 + veor d25,d25,d24 + add r9,r9,r3 + and r2,r2,r5 + vadd.i32 d5,d5,d25 + eor r3,r0,r5,ror#19 + eor r0,r9,r9,ror#11 + vadd.i32 q8,q8,q2 + eor r2,r2,r7 + add r8,r8,r3,ror#6 + eor r3,r9,r10 + eor r0,r0,r9,ror#20 + add r8,r8,r2 + ldr r2,[sp,#48] + and r12,r12,r3 + add r4,r4,r8 + vst1.32 {q8},[r1,:128]! + add r8,r8,r0,ror#2 + eor r12,r12,r10 + vext.8 q8,q3,q0,#4 + add r7,r7,r2 + eor r2,r5,r6 + eor r0,r4,r4,ror#5 + vext.8 q9,q1,q2,#4 + add r8,r8,r12 + and r2,r2,r4 + eor r12,r0,r4,ror#19 + vshr.u32 q10,q8,#7 + eor r0,r8,r8,ror#11 + eor r2,r2,r6 + vadd.i32 q3,q3,q9 + add r7,r7,r12,ror#6 + eor r12,r8,r9 + vshr.u32 q9,q8,#3 + eor r0,r0,r8,ror#20 + add r7,r7,r2 + vsli.32 q10,q8,#25 + ldr r2,[sp,#52] + and r3,r3,r12 + vshr.u32 q11,q8,#18 + add r11,r11,r7 + add r7,r7,r0,ror#2 + eor r3,r3,r9 + veor q9,q9,q10 + add r6,r6,r2 + vsli.32 q11,q8,#14 + eor r2,r4,r5 + eor r0,r11,r11,ror#5 + vshr.u32 d24,d5,#17 + add r7,r7,r3 + and r2,r2,r11 + veor q9,q9,q11 + eor r3,r0,r11,ror#19 + eor r0,r7,r7,ror#11 + vsli.32 d24,d5,#15 + eor r2,r2,r5 + add r6,r6,r3,ror#6 + vshr.u32 d25,d5,#10 + eor r3,r7,r8 + eor r0,r0,r7,ror#20 + vadd.i32 q3,q3,q9 + add r6,r6,r2 + ldr r2,[sp,#56] + veor d25,d25,d24 + and r12,r12,r3 + add r10,r10,r6 + vshr.u32 d24,d5,#19 + add r6,r6,r0,ror#2 + eor r12,r12,r8 + vsli.32 d24,d5,#13 + add r5,r5,r2 + eor r2,r11,r4 + veor d25,d25,d24 + eor r0,r10,r10,ror#5 + add r6,r6,r12 + vadd.i32 d6,d6,d25 + and r2,r2,r10 + eor r12,r0,r10,ror#19 + vshr.u32 d24,d6,#17 + eor r0,r6,r6,ror#11 + eor r2,r2,r4 + vsli.32 d24,d6,#15 + add r5,r5,r12,ror#6 + eor r12,r6,r7 + vshr.u32 d25,d6,#10 + eor r0,r0,r6,ror#20 + add r5,r5,r2 + veor d25,d25,d24 + ldr r2,[sp,#60] + and r3,r3,r12 + vshr.u32 d24,d6,#19 + add r9,r9,r5 + add r5,r5,r0,ror#2 + eor r3,r3,r7 + vld1.32 {q8},[r14,:128]! + add r4,r4,r2 + vsli.32 d24,d6,#13 + eor r2,r10,r11 + eor r0,r9,r9,ror#5 + veor d25,d25,d24 + add r5,r5,r3 + and r2,r2,r9 + vadd.i32 d7,d7,d25 + eor r3,r0,r9,ror#19 + eor r0,r5,r5,ror#11 + vadd.i32 q8,q8,q3 + eor r2,r2,r11 + add r4,r4,r3,ror#6 + eor r3,r5,r6 + eor r0,r0,r5,ror#20 + add r4,r4,r2 + ldr r2,[r14] + and r12,r12,r3 + add r8,r8,r4 + vst1.32 {q8},[r1,:128]! + add r4,r4,r0,ror#2 + eor r12,r12,r6 + teq r2,#0 @ check for K256 terminator + ldr r2,[sp,#0] + sub r1,r1,#64 + bne .L_00_48 + + ldr r1,[sp,#68] + ldr r0,[sp,#72] + sub r14,r14,#256 @ rewind r14 + teq r1,r0 + it eq + subeq r1,r1,#64 @ avoid SEGV + vld1.8 {q0},[r1]! @ load next input block + vld1.8 {q1},[r1]! + vld1.8 {q2},[r1]! + vld1.8 {q3},[r1]! + it ne + strne r1,[sp,#68] + mov r1,sp + add r11,r11,r2 + eor r2,r9,r10 + eor r0,r8,r8,ror#5 + add r4,r4,r12 + vld1.32 {q8},[r14,:128]! + and r2,r2,r8 + eor r12,r0,r8,ror#19 + eor r0,r4,r4,ror#11 + eor r2,r2,r10 + vrev32.8 q0,q0 + add r11,r11,r12,ror#6 + eor r12,r4,r5 + eor r0,r0,r4,ror#20 + add r11,r11,r2 + vadd.i32 q8,q8,q0 + ldr r2,[sp,#4] + and r3,r3,r12 + add r7,r7,r11 + add r11,r11,r0,ror#2 + eor r3,r3,r5 + add r10,r10,r2 + eor r2,r8,r9 + eor r0,r7,r7,ror#5 + add r11,r11,r3 + and r2,r2,r7 + eor r3,r0,r7,ror#19 + eor r0,r11,r11,ror#11 + eor r2,r2,r9 + add r10,r10,r3,ror#6 + eor r3,r11,r4 + eor r0,r0,r11,ror#20 + add r10,r10,r2 + ldr r2,[sp,#8] + and r12,r12,r3 + add r6,r6,r10 + add r10,r10,r0,ror#2 + eor r12,r12,r4 + add r9,r9,r2 + eor r2,r7,r8 + eor r0,r6,r6,ror#5 + add r10,r10,r12 + and r2,r2,r6 + eor r12,r0,r6,ror#19 + eor r0,r10,r10,ror#11 + eor r2,r2,r8 + add r9,r9,r12,ror#6 + eor r12,r10,r11 + eor r0,r0,r10,ror#20 + add r9,r9,r2 + ldr r2,[sp,#12] + and r3,r3,r12 + add r5,r5,r9 + add r9,r9,r0,ror#2 + eor r3,r3,r11 + add r8,r8,r2 + eor r2,r6,r7 + eor r0,r5,r5,ror#5 + add r9,r9,r3 + and r2,r2,r5 + eor r3,r0,r5,ror#19 + eor r0,r9,r9,ror#11 + eor r2,r2,r7 + add r8,r8,r3,ror#6 + eor r3,r9,r10 + eor r0,r0,r9,ror#20 + add r8,r8,r2 + ldr r2,[sp,#16] + and r12,r12,r3 + add r4,r4,r8 + add r8,r8,r0,ror#2 + eor r12,r12,r10 + vst1.32 {q8},[r1,:128]! + add r7,r7,r2 + eor r2,r5,r6 + eor r0,r4,r4,ror#5 + add r8,r8,r12 + vld1.32 {q8},[r14,:128]! + and r2,r2,r4 + eor r12,r0,r4,ror#19 + eor r0,r8,r8,ror#11 + eor r2,r2,r6 + vrev32.8 q1,q1 + add r7,r7,r12,ror#6 + eor r12,r8,r9 + eor r0,r0,r8,ror#20 + add r7,r7,r2 + vadd.i32 q8,q8,q1 + ldr r2,[sp,#20] + and r3,r3,r12 + add r11,r11,r7 + add r7,r7,r0,ror#2 + eor r3,r3,r9 + add r6,r6,r2 + eor r2,r4,r5 + eor r0,r11,r11,ror#5 + add r7,r7,r3 + and r2,r2,r11 + eor r3,r0,r11,ror#19 + eor r0,r7,r7,ror#11 + eor r2,r2,r5 + add r6,r6,r3,ror#6 + eor r3,r7,r8 + eor r0,r0,r7,ror#20 + add r6,r6,r2 + ldr r2,[sp,#24] + and r12,r12,r3 + add r10,r10,r6 + add r6,r6,r0,ror#2 + eor r12,r12,r8 + add r5,r5,r2 + eor r2,r11,r4 + eor r0,r10,r10,ror#5 + add r6,r6,r12 + and r2,r2,r10 + eor r12,r0,r10,ror#19 + eor r0,r6,r6,ror#11 + eor r2,r2,r4 + add r5,r5,r12,ror#6 + eor r12,r6,r7 + eor r0,r0,r6,ror#20 + add r5,r5,r2 + ldr r2,[sp,#28] + and r3,r3,r12 + add r9,r9,r5 + add r5,r5,r0,ror#2 + eor r3,r3,r7 + add r4,r4,r2 + eor r2,r10,r11 + eor r0,r9,r9,ror#5 + add r5,r5,r3 + and r2,r2,r9 + eor r3,r0,r9,ror#19 + eor r0,r5,r5,ror#11 + eor r2,r2,r11 + add r4,r4,r3,ror#6 + eor r3,r5,r6 + eor r0,r0,r5,ror#20 + add r4,r4,r2 + ldr r2,[sp,#32] + and r12,r12,r3 + add r8,r8,r4 + add r4,r4,r0,ror#2 + eor r12,r12,r6 + vst1.32 {q8},[r1,:128]! + add r11,r11,r2 + eor r2,r9,r10 + eor r0,r8,r8,ror#5 + add r4,r4,r12 + vld1.32 {q8},[r14,:128]! + and r2,r2,r8 + eor r12,r0,r8,ror#19 + eor r0,r4,r4,ror#11 + eor r2,r2,r10 + vrev32.8 q2,q2 + add r11,r11,r12,ror#6 + eor r12,r4,r5 + eor r0,r0,r4,ror#20 + add r11,r11,r2 + vadd.i32 q8,q8,q2 + ldr r2,[sp,#36] + and r3,r3,r12 + add r7,r7,r11 + add r11,r11,r0,ror#2 + eor r3,r3,r5 + add r10,r10,r2 + eor r2,r8,r9 + eor r0,r7,r7,ror#5 + add r11,r11,r3 + and r2,r2,r7 + eor r3,r0,r7,ror#19 + eor r0,r11,r11,ror#11 + eor r2,r2,r9 + add r10,r10,r3,ror#6 + eor r3,r11,r4 + eor r0,r0,r11,ror#20 + add r10,r10,r2 + ldr r2,[sp,#40] + and r12,r12,r3 + add r6,r6,r10 + add r10,r10,r0,ror#2 + eor r12,r12,r4 + add r9,r9,r2 + eor r2,r7,r8 + eor r0,r6,r6,ror#5 + add r10,r10,r12 + and r2,r2,r6 + eor r12,r0,r6,ror#19 + eor r0,r10,r10,ror#11 + eor r2,r2,r8 + add r9,r9,r12,ror#6 + eor r12,r10,r11 + eor r0,r0,r10,ror#20 + add r9,r9,r2 + ldr r2,[sp,#44] + and r3,r3,r12 + add r5,r5,r9 + add r9,r9,r0,ror#2 + eor r3,r3,r11 + add r8,r8,r2 + eor r2,r6,r7 + eor r0,r5,r5,ror#5 + add r9,r9,r3 + and r2,r2,r5 + eor r3,r0,r5,ror#19 + eor r0,r9,r9,ror#11 + eor r2,r2,r7 + add r8,r8,r3,ror#6 + eor r3,r9,r10 + eor r0,r0,r9,ror#20 + add r8,r8,r2 + ldr r2,[sp,#48] + and r12,r12,r3 + add r4,r4,r8 + add r8,r8,r0,ror#2 + eor r12,r12,r10 + vst1.32 {q8},[r1,:128]! + add r7,r7,r2 + eor r2,r5,r6 + eor r0,r4,r4,ror#5 + add r8,r8,r12 + vld1.32 {q8},[r14,:128]! + and r2,r2,r4 + eor r12,r0,r4,ror#19 + eor r0,r8,r8,ror#11 + eor r2,r2,r6 + vrev32.8 q3,q3 + add r7,r7,r12,ror#6 + eor r12,r8,r9 + eor r0,r0,r8,ror#20 + add r7,r7,r2 + vadd.i32 q8,q8,q3 + ldr r2,[sp,#52] + and r3,r3,r12 + add r11,r11,r7 + add r7,r7,r0,ror#2 + eor r3,r3,r9 + add r6,r6,r2 + eor r2,r4,r5 + eor r0,r11,r11,ror#5 + add r7,r7,r3 + and r2,r2,r11 + eor r3,r0,r11,ror#19 + eor r0,r7,r7,ror#11 + eor r2,r2,r5 + add r6,r6,r3,ror#6 + eor r3,r7,r8 + eor r0,r0,r7,ror#20 + add r6,r6,r2 + ldr r2,[sp,#56] + and r12,r12,r3 + add r10,r10,r6 + add r6,r6,r0,ror#2 + eor r12,r12,r8 + add r5,r5,r2 + eor r2,r11,r4 + eor r0,r10,r10,ror#5 + add r6,r6,r12 + and r2,r2,r10 + eor r12,r0,r10,ror#19 + eor r0,r6,r6,ror#11 + eor r2,r2,r4 + add r5,r5,r12,ror#6 + eor r12,r6,r7 + eor r0,r0,r6,ror#20 + add r5,r5,r2 + ldr r2,[sp,#60] + and r3,r3,r12 + add r9,r9,r5 + add r5,r5,r0,ror#2 + eor r3,r3,r7 + add r4,r4,r2 + eor r2,r10,r11 + eor r0,r9,r9,ror#5 + add r5,r5,r3 + and r2,r2,r9 + eor r3,r0,r9,ror#19 + eor r0,r5,r5,ror#11 + eor r2,r2,r11 + add r4,r4,r3,ror#6 + eor r3,r5,r6 + eor r0,r0,r5,ror#20 + add r4,r4,r2 + ldr r2,[sp,#64] + and r12,r12,r3 + add r8,r8,r4 + add r4,r4,r0,ror#2 + eor r12,r12,r6 + vst1.32 {q8},[r1,:128]! + ldr r0,[r2,#0] + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + ldr r12,[r2,#4] + ldr r3,[r2,#8] + ldr r1,[r2,#12] + add r4,r4,r0 @ accumulate + ldr r0,[r2,#16] + add r5,r5,r12 + ldr r12,[r2,#20] + add r6,r6,r3 + ldr r3,[r2,#24] + add r7,r7,r1 + ldr r1,[r2,#28] + add r8,r8,r0 + str r4,[r2],#4 + add r9,r9,r12 + str r5,[r2],#4 + add r10,r10,r3 + str r6,[r2],#4 + add r11,r11,r1 + str r7,[r2],#4 + stmia r2,{r8-r11} + + ittte ne + movne r1,sp + ldrne r2,[sp,#0] + eorne r12,r12,r12 + ldreq sp,[sp,#76] @ restore original sp + itt ne + eorne r3,r5,r6 + bne .L_00_48 + + ldmia sp!,{r4-r12,pc} +.size sha256_block_data_order_neon,.-sha256_block_data_order_neon +#endif +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) + +# ifdef __thumb2__ +# define INST(a,b,c,d) .byte c,d|0xc,a,b +# else +# define INST(a,b,c,d) .byte a,b,c,d +# endif + +.type sha256_block_data_order_armv8,%function +.align 5 +sha256_block_data_order_armv8: +.LARMv8: + vld1.32 {q0,q1},[r0] +# ifdef __thumb2__ + adr r3,.LARMv8 + sub r3,r3,#.LARMv8-K256 +# else + adrl r3,K256 +# endif + add r2,r1,r2,lsl#6 @ len to point at the end of inp + +.Loop_v8: + vld1.8 {q8-q9},[r1]! + vld1.8 {q10-q11},[r1]! + vld1.32 {q12},[r3]! + vrev32.8 q8,q8 + vrev32.8 q9,q9 + vrev32.8 q10,q10 + vrev32.8 q11,q11 + vmov q14,q0 @ offload + vmov q15,q1 + teq r1,r2 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q8 + INST(0xe2,0x03,0xfa,0xf3) @ sha256su0 q8,q9 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + INST(0xe6,0x0c,0x64,0xf3) @ sha256su1 q8,q10,q11 + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q9 + INST(0xe4,0x23,0xfa,0xf3) @ sha256su0 q9,q10 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + INST(0xe0,0x2c,0x66,0xf3) @ sha256su1 q9,q11,q8 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q10 + INST(0xe6,0x43,0xfa,0xf3) @ sha256su0 q10,q11 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + INST(0xe2,0x4c,0x60,0xf3) @ sha256su1 q10,q8,q9 + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q11 + INST(0xe0,0x63,0xfa,0xf3) @ sha256su0 q11,q8 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + INST(0xe4,0x6c,0x62,0xf3) @ sha256su1 q11,q9,q10 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q8 + INST(0xe2,0x03,0xfa,0xf3) @ sha256su0 q8,q9 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + INST(0xe6,0x0c,0x64,0xf3) @ sha256su1 q8,q10,q11 + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q9 + INST(0xe4,0x23,0xfa,0xf3) @ sha256su0 q9,q10 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + INST(0xe0,0x2c,0x66,0xf3) @ sha256su1 q9,q11,q8 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q10 + INST(0xe6,0x43,0xfa,0xf3) @ sha256su0 q10,q11 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + INST(0xe2,0x4c,0x60,0xf3) @ sha256su1 q10,q8,q9 + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q11 + INST(0xe0,0x63,0xfa,0xf3) @ sha256su0 q11,q8 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + INST(0xe4,0x6c,0x62,0xf3) @ sha256su1 q11,q9,q10 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q8 + INST(0xe2,0x03,0xfa,0xf3) @ sha256su0 q8,q9 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + INST(0xe6,0x0c,0x64,0xf3) @ sha256su1 q8,q10,q11 + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q9 + INST(0xe4,0x23,0xfa,0xf3) @ sha256su0 q9,q10 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + INST(0xe0,0x2c,0x66,0xf3) @ sha256su1 q9,q11,q8 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q10 + INST(0xe6,0x43,0xfa,0xf3) @ sha256su0 q10,q11 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + INST(0xe2,0x4c,0x60,0xf3) @ sha256su1 q10,q8,q9 + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q11 + INST(0xe0,0x63,0xfa,0xf3) @ sha256su0 q11,q8 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + INST(0xe4,0x6c,0x62,0xf3) @ sha256su1 q11,q9,q10 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q8 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q9 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + + vld1.32 {q13},[r3] + vadd.i32 q12,q12,q10 + sub r3,r3,#256-16 @ rewind + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + + vadd.i32 q13,q13,q11 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + + vadd.i32 q0,q0,q14 + vadd.i32 q1,q1,q15 + it ne + bne .Loop_v8 + + vst1.32 {q0,q1},[r0] + + bx lr @ bx lr +.size sha256_block_data_order_armv8,.-sha256_block_data_order_armv8 +#endif +.asciz "SHA256 block transform for ARMv4/NEON/ARMv8, CRYPTOGAMS by <appro@openssl.org>" +.align 2 +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) +.comm OPENSSL_armcap_P,4,4 +#endif diff --git a/arch/arm/crypto/sha256_glue.c b/arch/arm/crypto/sha256_glue.c new file mode 100644 index 000000000000..a84e869ef900 --- /dev/null +++ b/arch/arm/crypto/sha256_glue.c @@ -0,0 +1,128 @@ +/* + * Glue code for the SHA256 Secure Hash Algorithm assembly implementation + * using optimized ARM assembler and NEON instructions. + * + * Copyright © 2015 Google Inc. + * + * This file is based on sha256_ssse3_glue.c: + * Copyright (C) 2013 Intel Corporation + * Author: Tim Chen <tim.c.chen@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#include <crypto/internal/hash.h> +#include <linux/crypto.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/cryptohash.h> +#include <linux/types.h> +#include <linux/string.h> +#include <crypto/sha.h> +#include <crypto/sha256_base.h> +#include <asm/simd.h> +#include <asm/neon.h> + +#include "sha256_glue.h" + +asmlinkage void sha256_block_data_order(u32 *digest, const void *data, + unsigned int num_blks); + +int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + /* make sure casting to sha256_block_fn() is safe */ + BUILD_BUG_ON(offsetof(struct sha256_state, state) != 0); + + return sha256_base_do_update(desc, data, len, + (sha256_block_fn *)sha256_block_data_order); +} +EXPORT_SYMBOL(crypto_sha256_arm_update); + +static int sha256_final(struct shash_desc *desc, u8 *out) +{ + sha256_base_do_finalize(desc, + (sha256_block_fn *)sha256_block_data_order); + return sha256_base_finish(desc, out); +} + +int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) +{ + sha256_base_do_update(desc, data, len, + (sha256_block_fn *)sha256_block_data_order); + return sha256_final(desc, out); +} +EXPORT_SYMBOL(crypto_sha256_arm_finup); + +static struct shash_alg algs[] = { { + .digestsize = SHA256_DIGEST_SIZE, + .init = sha256_base_init, + .update = crypto_sha256_arm_update, + .final = sha256_final, + .finup = crypto_sha256_arm_finup, + .descsize = sizeof(struct sha256_state), + .base = { + .cra_name = "sha256", + .cra_driver_name = "sha256-asm", + .cra_priority = 150, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA256_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}, { + .digestsize = SHA224_DIGEST_SIZE, + .init = sha224_base_init, + .update = crypto_sha256_arm_update, + .final = sha256_final, + .finup = crypto_sha256_arm_finup, + .descsize = sizeof(struct sha256_state), + .base = { + .cra_name = "sha224", + .cra_driver_name = "sha224-asm", + .cra_priority = 150, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA224_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +} }; + +static int __init sha256_mod_init(void) +{ + int res = crypto_register_shashes(algs, ARRAY_SIZE(algs)); + + if (res < 0) + return res; + + if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && cpu_has_neon()) { + res = crypto_register_shashes(sha256_neon_algs, + ARRAY_SIZE(sha256_neon_algs)); + + if (res < 0) + crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); + } + + return res; +} + +static void __exit sha256_mod_fini(void) +{ + crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); + + if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && cpu_has_neon()) + crypto_unregister_shashes(sha256_neon_algs, + ARRAY_SIZE(sha256_neon_algs)); +} + +module_init(sha256_mod_init); +module_exit(sha256_mod_fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SHA256 Secure Hash Algorithm (ARM), including NEON"); + +MODULE_ALIAS_CRYPTO("sha256"); diff --git a/arch/arm/crypto/sha256_glue.h b/arch/arm/crypto/sha256_glue.h new file mode 100644 index 000000000000..7cf0bf786ada --- /dev/null +++ b/arch/arm/crypto/sha256_glue.h @@ -0,0 +1,14 @@ +#ifndef _CRYPTO_SHA256_GLUE_H +#define _CRYPTO_SHA256_GLUE_H + +#include <linux/crypto.h> + +extern struct shash_alg sha256_neon_algs[2]; + +int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data, + unsigned int len); + +int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *hash); + +#endif /* _CRYPTO_SHA256_GLUE_H */ diff --git a/arch/arm/crypto/sha256_neon_glue.c b/arch/arm/crypto/sha256_neon_glue.c new file mode 100644 index 000000000000..39ccd658817e --- /dev/null +++ b/arch/arm/crypto/sha256_neon_glue.c @@ -0,0 +1,101 @@ +/* + * Glue code for the SHA256 Secure Hash Algorithm assembly implementation + * using NEON instructions. + * + * Copyright © 2015 Google Inc. + * + * This file is based on sha512_neon_glue.c: + * Copyright © 2014 Jussi Kivilinna <jussi.kivilinna@iki.fi> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#include <crypto/internal/hash.h> +#include <linux/cryptohash.h> +#include <linux/types.h> +#include <linux/string.h> +#include <crypto/sha.h> +#include <crypto/sha256_base.h> +#include <asm/byteorder.h> +#include <asm/simd.h> +#include <asm/neon.h> + +#include "sha256_glue.h" + +asmlinkage void sha256_block_data_order_neon(u32 *digest, const void *data, + unsigned int num_blks); + +static int sha256_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + + if (!may_use_simd() || + (sctx->count % SHA256_BLOCK_SIZE) + len < SHA256_BLOCK_SIZE) + return crypto_sha256_arm_update(desc, data, len); + + kernel_neon_begin(); + sha256_base_do_update(desc, data, len, + (sha256_block_fn *)sha256_block_data_order_neon); + kernel_neon_end(); + + return 0; +} + +static int sha256_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) +{ + if (!may_use_simd()) + return crypto_sha256_arm_finup(desc, data, len, out); + + kernel_neon_begin(); + if (len) + sha256_base_do_update(desc, data, len, + (sha256_block_fn *)sha256_block_data_order_neon); + sha256_base_do_finalize(desc, + (sha256_block_fn *)sha256_block_data_order_neon); + kernel_neon_end(); + + return sha256_base_finish(desc, out); +} + +static int sha256_final(struct shash_desc *desc, u8 *out) +{ + return sha256_finup(desc, NULL, 0, out); +} + +struct shash_alg sha256_neon_algs[] = { { + .digestsize = SHA256_DIGEST_SIZE, + .init = sha256_base_init, + .update = sha256_update, + .final = sha256_final, + .finup = sha256_finup, + .descsize = sizeof(struct sha256_state), + .base = { + .cra_name = "sha256", + .cra_driver_name = "sha256-neon", + .cra_priority = 250, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA256_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}, { + .digestsize = SHA224_DIGEST_SIZE, + .init = sha224_base_init, + .update = sha256_update, + .final = sha256_final, + .finup = sha256_finup, + .descsize = sizeof(struct sha256_state), + .base = { + .cra_name = "sha224", + .cra_driver_name = "sha224-neon", + .cra_priority = 250, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA224_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +} }; diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index fe74c0d1e485..3c4596d0ce6c 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -1,6 +1,5 @@ -generic-y += auxvec.h generic-y += bitsperlong.h generic-y += cputime.h generic-y += current.h @@ -22,6 +21,7 @@ generic-y += preempt.h generic-y += resource.h generic-y += rwsem.h generic-y += scatterlist.h +generic-y += seccomp.h generic-y += sections.h generic-y += segment.h generic-y += sembuf.h diff --git a/arch/arm/include/asm/arm-cci.h b/arch/arm/include/asm/arm-cci.h new file mode 100644 index 000000000000..fe77f7ab7e6b --- /dev/null +++ b/arch/arm/include/asm/arm-cci.h @@ -0,0 +1,42 @@ +/* + * arch/arm/include/asm/arm-cci.h + * + * Copyright (C) 2015 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __ASM_ARM_CCI_H +#define __ASM_ARM_CCI_H + +#ifdef CONFIG_MCPM +#include <asm/mcpm.h> + +/* + * We don't have a reliable way of detecting whether, + * if we have access to secure-only registers, unless + * mcpm is registered. + */ +static inline bool platform_has_secure_cci_access(void) +{ + return mcpm_is_available(); +} + +#else +static inline bool platform_has_secure_cci_access(void) +{ + return false; +} +#endif + +#endif diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index f67fd3afebdf..186270b3e194 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -237,6 +237,9 @@ .pushsection ".alt.smp.init", "a" ;\ .long 9998b ;\ 9997: instr ;\ + .if . - 9997b == 2 ;\ + nop ;\ + .endif ;\ .if . - 9997b != 4 ;\ .error "ALT_UP() content must assemble to exactly 4 bytes";\ .endif ;\ diff --git a/arch/arm/include/asm/auxvec.h b/arch/arm/include/asm/auxvec.h new file mode 100644 index 000000000000..fbd388c46299 --- /dev/null +++ b/arch/arm/include/asm/auxvec.h @@ -0,0 +1 @@ +#include <uapi/asm/auxvec.h> diff --git a/arch/arm/include/asm/cpuidle.h b/arch/arm/include/asm/cpuidle.h index af319ac4960c..0f8424924902 100644 --- a/arch/arm/include/asm/cpuidle.h +++ b/arch/arm/include/asm/cpuidle.h @@ -1,6 +1,8 @@ #ifndef __ASM_ARM_CPUIDLE_H #define __ASM_ARM_CPUIDLE_H +#include <asm/proc-fns.h> + #ifdef CONFIG_CPU_IDLE extern int arm_cpuidle_simple_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); @@ -25,4 +27,25 @@ static inline int arm_cpuidle_simple_enter(struct cpuidle_device *dev, */ #define ARM_CPUIDLE_WFI_STATE ARM_CPUIDLE_WFI_STATE_PWR(UINT_MAX) +struct device_node; + +struct cpuidle_ops { + int (*suspend)(int cpu, unsigned long arg); + int (*init)(struct device_node *, int cpu); +}; + +struct of_cpuidle_method { + const char *method; + struct cpuidle_ops *ops; +}; + +#define CPUIDLE_METHOD_OF_DECLARE(name, _method, _ops) \ + static const struct of_cpuidle_method __cpuidle_method_of_table_##name \ + __used __section(__cpuidle_method_of_table) \ + = { .method = _method, .ops = _ops } + +extern int arm_cpuidle_suspend(int index); + +extern int arm_cpuidle_init(int cpu); + #endif diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 819777d0e91f..85e374f873ac 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -253,4 +253,20 @@ static inline int cpu_is_pj4(void) #else #define cpu_is_pj4() 0 #endif + +static inline int __attribute_const__ cpuid_feature_extract_field(u32 features, + int field) +{ + int feature = (features >> field) & 15; + + /* feature registers are signed values */ + if (feature > 8) + feature -= 16; + + return feature; +} + +#define cpuid_feature_extract(reg, field) \ + cpuid_feature_extract_field(read_cpuid_ext(reg), field) + #endif diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index afb9cafd3786..d2315ffd8f12 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -1,7 +1,9 @@ #ifndef __ASMARM_ELF_H #define __ASMARM_ELF_H +#include <asm/auxvec.h> #include <asm/hwcap.h> +#include <asm/vdso_datapage.h> /* * ELF register definitions.. @@ -115,7 +117,7 @@ int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); the loader. We need to make sure that it is out of the way of the program that it will "exec", and that there is sufficient room for the brk. */ -#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) +#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2) /* When the program starts, a1 contains a pointer to a function to be registered with atexit, as per the SVR4 ABI. A value of 0 means we @@ -125,11 +127,14 @@ int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); extern void elf_set_personality(const struct elf32_hdr *); #define SET_PERSONALITY(ex) elf_set_personality(&(ex)) -struct mm_struct; -extern unsigned long arch_randomize_brk(struct mm_struct *mm); -#define arch_randomize_brk arch_randomize_brk - #ifdef CONFIG_MMU +#ifdef CONFIG_VDSO +#define ARCH_DLINFO \ +do { \ + NEW_AUX_ENT(AT_SYSINFO_EHDR, \ + (elf_addr_t)current->mm->context.vdso); \ +} while (0) +#endif #define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1 struct linux_binprm; int arch_setup_additional_pages(struct linux_binprm *, int); diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 53e69dae796f..4e78065a16aa 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -13,7 +13,7 @@ " .align 3\n" \ " .long 1b, 4f, 2b, 4f\n" \ " .popsection\n" \ - " .pushsection .fixup,\"ax\"\n" \ + " .pushsection .text.fixup,\"ax\"\n" \ " .align 2\n" \ "4: mov %0, " err_reg "\n" \ " b 3b\n" \ diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h index 70f9b9bfb1f9..5f337dc5c108 100644 --- a/arch/arm/include/asm/jump_label.h +++ b/arch/arm/include/asm/jump_label.h @@ -1,7 +1,7 @@ #ifndef _ASM_ARM_JUMP_LABEL_H #define _ASM_ARM_JUMP_LABEL_H -#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ #include <linux/types.h> @@ -27,8 +27,6 @@ l_yes: return true; } -#endif /* __KERNEL__ */ - typedef u32 jump_label_t; struct jump_entry { @@ -37,4 +35,5 @@ struct jump_entry { jump_label_t key; }; +#endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h index 816db0bf2dd8..d995821f1698 100644 --- a/arch/arm/include/asm/kvm_arm.h +++ b/arch/arm/include/asm/kvm_arm.h @@ -185,6 +185,7 @@ #define HSR_COND (0xfU << HSR_COND_SHIFT) #define FSC_FAULT (0x04) +#define FSC_ACCESS (0x08) #define FSC_PERM (0x0c) /* Hyp Prefetch Fault Address Register (HPFAR/HDFAR) */ diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 41008cd7c53f..d71607c16601 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -27,6 +27,8 @@ #include <asm/fpstate.h> #include <kvm/arm_arch_timer.h> +#define __KVM_HAVE_ARCH_INTC_INITIALIZED + #if defined(CONFIG_KVM_ARM_MAX_VCPUS) #define KVM_MAX_VCPUS CONFIG_KVM_ARM_MAX_VCPUS #else @@ -165,19 +167,10 @@ void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte); unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu); int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices); +int kvm_age_hva(struct kvm *kvm, unsigned long start, unsigned long end); +int kvm_test_age_hva(struct kvm *kvm, unsigned long hva); /* We do not have shadow page tables, hence the empty hooks */ -static inline int kvm_age_hva(struct kvm *kvm, unsigned long start, - unsigned long end) -{ - return 0; -} - -static inline int kvm_test_age_hva(struct kvm *kvm, unsigned long hva) -{ - return 0; -} - static inline void kvm_arch_mmu_notifier_invalidate_page(struct kvm *kvm, unsigned long address) { diff --git a/arch/arm/include/asm/kvm_mmio.h b/arch/arm/include/asm/kvm_mmio.h index 3f83db2f6cf0..d8e90c8cb5fa 100644 --- a/arch/arm/include/asm/kvm_mmio.h +++ b/arch/arm/include/asm/kvm_mmio.h @@ -28,28 +28,6 @@ struct kvm_decode { bool sign_extend; }; -/* - * The in-kernel MMIO emulation code wants to use a copy of run->mmio, - * which is an anonymous type. Use our own type instead. - */ -struct kvm_exit_mmio { - phys_addr_t phys_addr; - u8 data[8]; - u32 len; - bool is_write; - void *private; -}; - -static inline void kvm_prepare_mmio(struct kvm_run *run, - struct kvm_exit_mmio *mmio) -{ - run->mmio.phys_addr = mmio->phys_addr; - run->mmio.len = mmio->len; - run->mmio.is_write = mmio->is_write; - memcpy(run->mmio.data, mmio->data, mmio->len); - run->exit_reason = KVM_EXIT_MMIO; -} - int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run); int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run, phys_addr_t fault_ipa); diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index 37ca2a4c6f09..405aa1883307 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -149,29 +149,28 @@ static inline bool kvm_s2pmd_readonly(pmd_t *pmd) (__boundary - 1 < (end) - 1)? __boundary: (end); \ }) +#define kvm_pgd_index(addr) pgd_index(addr) + static inline bool kvm_page_empty(void *ptr) { struct page *ptr_page = virt_to_page(ptr); return page_count(ptr_page) == 1; } - #define kvm_pte_table_empty(kvm, ptep) kvm_page_empty(ptep) #define kvm_pmd_table_empty(kvm, pmdp) kvm_page_empty(pmdp) #define kvm_pud_table_empty(kvm, pudp) (0) #define KVM_PREALLOC_LEVEL 0 -static inline int kvm_prealloc_hwpgd(struct kvm *kvm, pgd_t *pgd) +static inline void *kvm_get_hwpgd(struct kvm *kvm) { - return 0; + return kvm->arch.pgd; } -static inline void kvm_free_hwpgd(struct kvm *kvm) { } - -static inline void *kvm_get_hwpgd(struct kvm *kvm) +static inline unsigned int kvm_get_hwpgd_size(void) { - return kvm->arch.pgd; + return PTRS_PER_S2_PGD * sizeof(pgd_t); } struct kvm; @@ -207,7 +206,7 @@ static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn, bool need_flush = !vcpu_has_cache_enabled(vcpu) || ipa_uncached; - VM_BUG_ON(size & PAGE_MASK); + VM_BUG_ON(size & ~PAGE_MASK); if (!need_flush && !icache_is_pipt()) goto vipt_cache; @@ -270,6 +269,16 @@ static inline void __kvm_flush_dcache_pud(pud_t pud) void kvm_set_way_flush(struct kvm_vcpu *vcpu); void kvm_toggle_cache(struct kvm_vcpu *vcpu, bool was_enabled); +static inline bool __kvm_cpu_uses_extended_idmap(void) +{ + return false; +} + +static inline void __kvm_extend_hypmap(pgd_t *boot_hyp_pgd, + pgd_t *hyp_pgd, + pgd_t *merged_hyp_pgd, + unsigned long hyp_idmap_start) { } + #endif /* !__ASSEMBLY__ */ #endif /* __ARM_KVM_MMU_H__ */ diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h index 90c12e1e695c..0f79e4dec7f9 100644 --- a/arch/arm/include/asm/mach/time.h +++ b/arch/arm/include/asm/mach/time.h @@ -12,8 +12,7 @@ extern void timer_tick(void); -struct timespec; -typedef void (*clock_access_fn)(struct timespec *); +typedef void (*clock_access_fn)(struct timespec64 *); extern int register_persistent_clock(clock_access_fn read_boot, clock_access_fn read_persistent); diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h index 3446f6a1d9fa..50b378f59e08 100644 --- a/arch/arm/include/asm/mcpm.h +++ b/arch/arm/include/asm/mcpm.h @@ -171,12 +171,73 @@ void mcpm_cpu_suspend(u64 expected_residency); int mcpm_cpu_powered_up(void); /* - * Platform specific methods used in the implementation of the above API. + * Platform specific callbacks used in the implementation of the above API. + * + * cpu_powerup: + * Make given CPU runable. Called with MCPM lock held and IRQs disabled. + * The given cluster is assumed to be set up (cluster_powerup would have + * been called beforehand). Must return 0 for success or negative error code. + * + * cluster_powerup: + * Set up power for given cluster. Called with MCPM lock held and IRQs + * disabled. Called before first cpu_powerup when cluster is down. Must + * return 0 for success or negative error code. + * + * cpu_suspend_prepare: + * Special suspend configuration. Called on target CPU with MCPM lock held + * and IRQs disabled. This callback is optional. If provided, it is called + * before cpu_powerdown_prepare. + * + * cpu_powerdown_prepare: + * Configure given CPU for power down. Called on target CPU with MCPM lock + * held and IRQs disabled. Power down must be effective only at the next WFI instruction. + * + * cluster_powerdown_prepare: + * Configure given cluster for power down. Called on one CPU from target + * cluster with MCPM lock held and IRQs disabled. A cpu_powerdown_prepare + * for each CPU in the cluster has happened when this occurs. + * + * cpu_cache_disable: + * Clean and disable CPU level cache for the calling CPU. Called on with IRQs + * disabled only. The CPU is no longer cache coherent with the rest of the + * system when this returns. + * + * cluster_cache_disable: + * Clean and disable the cluster wide cache as well as the CPU level cache + * for the calling CPU. No call to cpu_cache_disable will happen for this + * CPU. Called with IRQs disabled and only when all the other CPUs are done + * with their own cpu_cache_disable. The cluster is no longer cache coherent + * with the rest of the system when this returns. + * + * cpu_is_up: + * Called on given CPU after it has been powered up or resumed. The MCPM lock + * is held and IRQs disabled. This callback is optional. + * + * cluster_is_up: + * Called by the first CPU to be powered up or resumed in given cluster. + * The MCPM lock is held and IRQs disabled. This callback is optional. If + * provided, it is called before cpu_is_up for that CPU. + * + * wait_for_powerdown: + * Wait until given CPU is powered down. This is called in sleeping context. + * Some reasonable timeout must be considered. Must return 0 for success or + * negative error code. */ struct mcpm_platform_ops { + int (*cpu_powerup)(unsigned int cpu, unsigned int cluster); + int (*cluster_powerup)(unsigned int cluster); + void (*cpu_suspend_prepare)(unsigned int cpu, unsigned int cluster); + void (*cpu_powerdown_prepare)(unsigned int cpu, unsigned int cluster); + void (*cluster_powerdown_prepare)(unsigned int cluster); + void (*cpu_cache_disable)(void); + void (*cluster_cache_disable)(void); + void (*cpu_is_up)(unsigned int cpu, unsigned int cluster); + void (*cluster_is_up)(unsigned int cluster); + int (*wait_for_powerdown)(unsigned int cpu, unsigned int cluster); + + /* deprecated callbacks */ int (*power_up)(unsigned int cpu, unsigned int cluster); void (*power_down)(void); - int (*wait_for_powerdown)(unsigned int cpu, unsigned int cluster); void (*suspend)(u64); void (*powered_up)(void); }; diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index 64fd15159b7d..a5b47421059d 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -11,6 +11,9 @@ typedef struct { #endif unsigned int vmalloc_seq; unsigned long sigpage; +#ifdef CONFIG_VDSO + unsigned long vdso; +#endif } mm_context_t; #ifdef CONFIG_CPU_HAS_ASID diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index b1596bd59129..675e4ab79f68 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -92,6 +92,7 @@ struct pmu_hw_events { struct arm_pmu { struct pmu pmu; cpumask_t active_irqs; + int *irq_affinity; char *name; irqreturn_t (*handle_irq)(int irq_num, void *dev); void (*enable)(struct perf_event *event); diff --git a/arch/arm/include/asm/seccomp.h b/arch/arm/include/asm/seccomp.h deleted file mode 100644 index 52b156b341f5..000000000000 --- a/arch/arm/include/asm/seccomp.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _ASM_ARM_SECCOMP_H -#define _ASM_ARM_SECCOMP_H - -#include <linux/unistd.h> - -#define __NR_seccomp_read __NR_read -#define __NR_seccomp_write __NR_write -#define __NR_seccomp_exit __NR_exit -#define __NR_seccomp_sigreturn __NR_rt_sigreturn - -#endif /* _ASM_ARM_SECCOMP_H */ diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h index 0ad7d490ee6f..993e5224d8f7 100644 --- a/arch/arm/include/asm/smp_plat.h +++ b/arch/arm/include/asm/smp_plat.h @@ -104,6 +104,7 @@ static inline u32 mpidr_hash_size(void) return 1 << mpidr_hash.bits; } +extern int platform_can_secondary_boot(void); extern int platform_can_cpu_hotplug(void); #endif diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 72812a1f3d1c..bd32eded3e50 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -23,7 +23,6 @@ #ifndef __ASSEMBLY__ struct task_struct; -struct exec_domain; #include <asm/types.h> #include <asm/domain.h> @@ -53,7 +52,6 @@ struct thread_info { int preempt_count; /* 0 => preemptable, <0 => bug */ mm_segment_t addr_limit; /* address limit */ struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ __u32 cpu; /* cpu */ __u32 cpu_domain; /* cpu domain */ struct cpu_context_save cpu_context; /* cpu context */ @@ -73,7 +71,6 @@ struct thread_info { #define INIT_THREAD_INFO(tsk) \ { \ .task = &tsk, \ - .exec_domain = &default_exec_domain, \ .flags = 0, \ .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index ce0786efd26c..74b17d09ef7a 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -315,7 +315,7 @@ do { \ __asm__ __volatile__( \ "1: " TUSER(ldrb) " %1,[%2],#0\n" \ "2:\n" \ - " .pushsection .fixup,\"ax\"\n" \ + " .pushsection .text.fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " mov %1, #0\n" \ @@ -351,7 +351,7 @@ do { \ __asm__ __volatile__( \ "1: " TUSER(ldr) " %1,[%2],#0\n" \ "2:\n" \ - " .pushsection .fixup,\"ax\"\n" \ + " .pushsection .text.fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " mov %1, #0\n" \ @@ -397,7 +397,7 @@ do { \ __asm__ __volatile__( \ "1: " TUSER(strb) " %1,[%2],#0\n" \ "2:\n" \ - " .pushsection .fixup,\"ax\"\n" \ + " .pushsection .text.fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " b 2b\n" \ @@ -430,7 +430,7 @@ do { \ __asm__ __volatile__( \ "1: " TUSER(str) " %1,[%2],#0\n" \ "2:\n" \ - " .pushsection .fixup,\"ax\"\n" \ + " .pushsection .text.fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " b 2b\n" \ @@ -458,7 +458,7 @@ do { \ THUMB( "1: " TUSER(str) " " __reg_oper1 ", [%1]\n" ) \ THUMB( "2: " TUSER(str) " " __reg_oper0 ", [%1, #4]\n" ) \ "3:\n" \ - " .pushsection .fixup,\"ax\"\n" \ + " .pushsection .text.fixup,\"ax\"\n" \ " .align 2\n" \ "4: mov %0, %3\n" \ " b 3b\n" \ diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h index b88beaba6b4a..200f9a7cd623 100644 --- a/arch/arm/include/asm/unified.h +++ b/arch/arm/include/asm/unified.h @@ -24,6 +24,14 @@ .syntax unified #endif +#ifdef CONFIG_CPU_V7M +#define AR_CLASS(x...) +#define M_CLASS(x...) x +#else +#define AR_CLASS(x...) x +#define M_CLASS(x...) +#endif + #ifdef CONFIG_THUMB2_KERNEL #if __GNUC__ < 4 diff --git a/arch/arm/include/asm/vdso.h b/arch/arm/include/asm/vdso.h new file mode 100644 index 000000000000..d0295f1dd1a3 --- /dev/null +++ b/arch/arm/include/asm/vdso.h @@ -0,0 +1,32 @@ +#ifndef __ASM_VDSO_H +#define __ASM_VDSO_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +struct mm_struct; + +#ifdef CONFIG_VDSO + +void arm_install_vdso(struct mm_struct *mm, unsigned long addr); + +extern char vdso_start, vdso_end; + +extern unsigned int vdso_total_pages; + +#else /* CONFIG_VDSO */ + +static inline void arm_install_vdso(struct mm_struct *mm, unsigned long addr) +{ +} + +#define vdso_total_pages 0 + +#endif /* CONFIG_VDSO */ + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* __ASM_VDSO_H */ diff --git a/arch/arm/include/asm/vdso_datapage.h b/arch/arm/include/asm/vdso_datapage.h new file mode 100644 index 000000000000..9be259442fca --- /dev/null +++ b/arch/arm/include/asm/vdso_datapage.h @@ -0,0 +1,60 @@ +/* + * Adapted from arm64 version. + * + * Copyright (C) 2012 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef __ASM_VDSO_DATAPAGE_H +#define __ASM_VDSO_DATAPAGE_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +#include <asm/page.h> + +/* Try to be cache-friendly on systems that don't implement the + * generic timer: fit the unconditionally updated fields in the first + * 32 bytes. + */ +struct vdso_data { + u32 seq_count; /* sequence count - odd during updates */ + u16 tk_is_cntvct; /* fall back to syscall if false */ + u16 cs_shift; /* clocksource shift */ + u32 xtime_coarse_sec; /* coarse time */ + u32 xtime_coarse_nsec; + + u32 wtm_clock_sec; /* wall to monotonic offset */ + u32 wtm_clock_nsec; + u32 xtime_clock_sec; /* CLOCK_REALTIME - seconds */ + u32 cs_mult; /* clocksource multiplier */ + + u64 cs_cycle_last; /* last cycle value */ + u64 cs_mask; /* clocksource mask */ + + u64 xtime_clock_snsec; /* CLOCK_REALTIME sub-ns base */ + u32 tz_minuteswest; /* timezone info for gettimeofday(2) */ + u32 tz_dsttime; +}; + +union vdso_data_store { + struct vdso_data data; + u8 page[PAGE_SIZE]; +}; + +#endif /* !__ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* __ASM_VDSO_DATAPAGE_H */ diff --git a/arch/arm/include/asm/word-at-a-time.h b/arch/arm/include/asm/word-at-a-time.h index a6d0a29861e7..5831dce4b51c 100644 --- a/arch/arm/include/asm/word-at-a-time.h +++ b/arch/arm/include/asm/word-at-a-time.h @@ -71,7 +71,7 @@ static inline unsigned long load_unaligned_zeropad(const void *addr) asm( "1: ldr %0, [%2]\n" "2:\n" - " .pushsection .fixup,\"ax\"\n" + " .pushsection .text.fixup,\"ax\"\n" " .align 2\n" "3: and %1, %2, #0x3\n" " bic %2, %2, #0x3\n" diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S index 80a6501b4d50..c3c45e628e33 100644 --- a/arch/arm/include/debug/at91.S +++ b/arch/arm/include/debug/at91.S @@ -18,8 +18,11 @@ #define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */ #endif -/* Keep in sync with mach-at91/include/mach/hardware.h */ +#ifdef CONFIG_MMU #define AT91_IO_P2V(x) ((x) - 0x01000000) +#else +#define AT91_IO_P2V(x) (x) +#endif #define AT91_DBGU_SR (0x14) /* Status Register */ #define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */ diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S index e55a9426b496..b03024fa671f 100644 --- a/arch/arm/include/debug/msm.S +++ b/arch/arm/include/debug/msm.S @@ -16,24 +16,17 @@ */ .macro addruart, rp, rv, tmp -#ifdef CONFIG_DEBUG_UART_PHYS ldr \rp, =CONFIG_DEBUG_UART_PHYS ldr \rv, =CONFIG_DEBUG_UART_VIRT -#endif .endm .macro senduart, rd, rx ARM_BE8(rev \rd, \rd ) -#ifdef CONFIG_DEBUG_QCOM_UARTDM @ Write the 1 character to UARTDM_TF str \rd, [\rx, #0x70] -#else - str \rd, [\rx, #0x0C] -#endif .endm .macro waituart, rd, rx -#ifdef CONFIG_DEBUG_QCOM_UARTDM @ check for TX_EMT in UARTDM_SR ldr \rd, [\rx, #0x08] ARM_BE8(rev \rd, \rd ) @@ -55,13 +48,6 @@ ARM_BE8(rev \rd, \rd ) str \rd, [\rx, #0x40] @ UARTDM reg. Read to induce delay ldr \rd, [\rx, #0x08] -#else - @ wait for TX_READY -1001: ldr \rd, [\rx, #0x08] -ARM_BE8(rev \rd, \rd ) - tst \rd, #0x04 - beq 1001b -#endif .endm .macro busyuart, rd, rx diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild index 70a1c9da30ca..a1c05f93d920 100644 --- a/arch/arm/include/uapi/asm/Kbuild +++ b/arch/arm/include/uapi/asm/Kbuild @@ -1,6 +1,7 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +header-y += auxvec.h header-y += byteorder.h header-y += fcntl.h header-y += hwcap.h diff --git a/arch/arm/include/uapi/asm/auxvec.h b/arch/arm/include/uapi/asm/auxvec.h new file mode 100644 index 000000000000..cb02a767a500 --- /dev/null +++ b/arch/arm/include/uapi/asm/auxvec.h @@ -0,0 +1,7 @@ +#ifndef __ASM_AUXVEC_H +#define __ASM_AUXVEC_H + +/* VDSO location */ +#define AT_SYSINFO_EHDR 33 + +#endif diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h index 0db25bc32864..df3f60cb1168 100644 --- a/arch/arm/include/uapi/asm/kvm.h +++ b/arch/arm/include/uapi/asm/kvm.h @@ -195,8 +195,17 @@ struct kvm_arch_memory_slot { #define KVM_ARM_IRQ_CPU_IRQ 0 #define KVM_ARM_IRQ_CPU_FIQ 1 -/* Highest supported SPI, from VGIC_NR_IRQS */ +/* + * This used to hold the highest supported SPI, but it is now obsolete + * and only here to provide source code level compatibility with older + * userland. The highest SPI number can be set via KVM_DEV_ARM_VGIC_GRP_NR_IRQS. + */ +#ifndef __KERNEL__ #define KVM_ARM_IRQ_GIC_MAX 127 +#endif + +/* One single KVM irqchip, ie. the VGIC */ +#define KVM_NR_IRQCHIPS 1 /* PSCI interface */ #define KVM_PSCI_FN_BASE 0x95c1ba5e diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 902397dd1000..752725dcbf42 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -16,7 +16,7 @@ CFLAGS_REMOVE_return_address.o = -pg # Object file lists. obj-y := elf.o entry-common.o irq.o opcodes.o \ - process.o ptrace.o return_address.o \ + process.o ptrace.o reboot.o return_address.o \ setup.o signal.o sigreturn_codes.o \ stacktrace.o sys_arm.o time.o traps.o @@ -34,7 +34,6 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_FIQ) += fiq.o fiqasm.o obj-$(CONFIG_MODULES) += armksyms.o module.o -obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o suspend.o @@ -75,6 +74,7 @@ obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o perf_event_cpu.o CFLAGS_pj4-cp0.o := -marm AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o +obj-$(CONFIG_VDSO) += vdso.o ifneq ($(CONFIG_ARCH_EBSA110),y) obj-y += io.o @@ -86,7 +86,7 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o ifeq ($(CONFIG_ARM_PSCI),y) -obj-y += psci.o +obj-y += psci.o psci-call.o obj-$(CONFIG_SMP) += psci_smp.o endif diff --git a/arch/arm/kernel/arthur.c b/arch/arm/kernel/arthur.c deleted file mode 100644 index 321c5291d05f..000000000000 --- a/arch/arm/kernel/arthur.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * linux/arch/arm/kernel/arthur.c - * - * Copyright (C) 1998, 1999, 2000, 2001 Philip Blundell - * - * Arthur personality - */ - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/personality.h> -#include <linux/stddef.h> -#include <linux/signal.h> -#include <linux/init.h> -#include <linux/sched.h> - -#include <asm/ptrace.h> - -/* Arthur doesn't have many signals, and a lot of those that it does - have don't map easily to any Linux equivalent. Never mind. */ - -#define ARTHUR_SIGABRT 1 -#define ARTHUR_SIGFPE 2 -#define ARTHUR_SIGILL 3 -#define ARTHUR_SIGINT 4 -#define ARTHUR_SIGSEGV 5 -#define ARTHUR_SIGTERM 6 -#define ARTHUR_SIGSTAK 7 -#define ARTHUR_SIGUSR1 8 -#define ARTHUR_SIGUSR2 9 -#define ARTHUR_SIGOSERROR 10 - -static unsigned long arthur_to_linux_signals[32] = { - 0, 1, 2, 3, 4, 5, 6, 7, - 8, 9, 10, 11, 12, 13, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23, - 24, 25, 26, 27, 28, 29, 30, 31 -}; - -static unsigned long linux_to_arthur_signals[32] = { - 0, -1, ARTHUR_SIGINT, -1, - ARTHUR_SIGILL, 5, ARTHUR_SIGABRT, 7, - ARTHUR_SIGFPE, 9, ARTHUR_SIGUSR1, ARTHUR_SIGSEGV, - ARTHUR_SIGUSR2, 13, 14, ARTHUR_SIGTERM, - 16, 17, 18, 19, - 20, 21, 22, 23, - 24, 25, 26, 27, - 28, 29, 30, 31 -}; - -static void arthur_lcall7(int nr, struct pt_regs *regs) -{ - struct siginfo info; - info.si_signo = SIGSWI; - info.si_errno = nr; - /* Bounce it to the emulator */ - send_sig_info(SIGSWI, &info, current); -} - -static struct exec_domain arthur_exec_domain = { - .name = "Arthur", - .handler = arthur_lcall7, - .pers_low = PER_RISCOS, - .pers_high = PER_RISCOS, - .signal_map = arthur_to_linux_signals, - .signal_invmap = linux_to_arthur_signals, - .module = THIS_MODULE, -}; - -/* - * We could do with some locking to stop Arthur being removed while - * processes are using it. - */ - -static int __init arthur_init(void) -{ - return register_exec_domain(&arthur_exec_domain); -} - -static void __exit arthur_exit(void) -{ - unregister_exec_domain(&arthur_exec_domain); -} - -module_init(arthur_init); -module_exit(arthur_exit); - -MODULE_LICENSE("GPL"); diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 2d2d6087b9b1..871b8267d211 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -25,6 +25,7 @@ #include <asm/memory.h> #include <asm/procinfo.h> #include <asm/suspend.h> +#include <asm/vdso_datapage.h> #include <asm/hardware/cache-l2x0.h> #include <linux/kbuild.h> @@ -66,7 +67,6 @@ int main(void) DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count)); DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit)); DEFINE(TI_TASK, offsetof(struct thread_info, task)); - DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain)); DEFINE(TI_CPU, offsetof(struct thread_info, cpu)); DEFINE(TI_CPU_DOMAIN, offsetof(struct thread_info, cpu_domain)); DEFINE(TI_CPU_SAVE, offsetof(struct thread_info, cpu_context)); @@ -190,7 +190,6 @@ int main(void) DEFINE(VCPU_HxFAR, offsetof(struct kvm_vcpu, arch.fault.hxfar)); DEFINE(VCPU_HPFAR, offsetof(struct kvm_vcpu, arch.fault.hpfar)); DEFINE(VCPU_HYP_PC, offsetof(struct kvm_vcpu, arch.fault.hyp_pc)); -#ifdef CONFIG_KVM_ARM_VGIC DEFINE(VCPU_VGIC_CPU, offsetof(struct kvm_vcpu, arch.vgic_cpu)); DEFINE(VGIC_V2_CPU_HCR, offsetof(struct vgic_cpu, vgic_v2.vgic_hcr)); DEFINE(VGIC_V2_CPU_VMCR, offsetof(struct vgic_cpu, vgic_v2.vgic_vmcr)); @@ -200,15 +199,16 @@ int main(void) DEFINE(VGIC_V2_CPU_APR, offsetof(struct vgic_cpu, vgic_v2.vgic_apr)); DEFINE(VGIC_V2_CPU_LR, offsetof(struct vgic_cpu, vgic_v2.vgic_lr)); DEFINE(VGIC_CPU_NR_LR, offsetof(struct vgic_cpu, nr_lr)); -#ifdef CONFIG_KVM_ARM_TIMER DEFINE(VCPU_TIMER_CNTV_CTL, offsetof(struct kvm_vcpu, arch.timer_cpu.cntv_ctl)); DEFINE(VCPU_TIMER_CNTV_CVAL, offsetof(struct kvm_vcpu, arch.timer_cpu.cntv_cval)); DEFINE(KVM_TIMER_CNTVOFF, offsetof(struct kvm, arch.timer.cntvoff)); DEFINE(KVM_TIMER_ENABLED, offsetof(struct kvm, arch.timer.enabled)); -#endif DEFINE(KVM_VGIC_VCTRL, offsetof(struct kvm, arch.vgic.vctrl_base)); -#endif DEFINE(KVM_VTTBR, offsetof(struct kvm, arch.vttbr)); #endif + BLANK(); +#ifdef CONFIG_VDSO + DEFINE(VDSO_DATA_SIZE, sizeof(union vdso_data_store)); +#endif return 0; } diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index ab19b7c03423..fcbbbb1b9e95 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -618,21 +618,15 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { - struct pci_sys_data *root = dev->sysdata; - unsigned long phys; - - if (mmap_state == pci_mmap_io) { + if (mmap_state == pci_mmap_io) return -EINVAL; - } else { - phys = vma->vm_pgoff + (root->mem_offset >> PAGE_SHIFT); - } /* * Mark this as IO */ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); - if (remap_pfn_range(vma, vma->vm_start, phys, + if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, vma->vm_end - vma->vm_start, vma->vm_page_prot)) return -EAGAIN; diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c index 89545f6c8403..318da33465f4 100644 --- a/arch/arm/kernel/cpuidle.c +++ b/arch/arm/kernel/cpuidle.c @@ -10,8 +10,28 @@ */ #include <linux/cpuidle.h> -#include <asm/proc-fns.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <asm/cpuidle.h> +extern struct of_cpuidle_method __cpuidle_method_of_table[]; + +static const struct of_cpuidle_method __cpuidle_method_of_table_sentinel + __used __section(__cpuidle_method_of_table_end); + +static struct cpuidle_ops cpuidle_ops[NR_CPUS]; + +/** + * arm_cpuidle_simple_enter() - a wrapper to cpu_do_idle() + * @dev: not used + * @drv: not used + * @index: not used + * + * A trivial wrapper to allow the cpu_do_idle function to be assigned as a + * cpuidle callback by matching the function signature. + * + * Returns the index passed as parameter + */ int arm_cpuidle_simple_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { @@ -19,3 +39,114 @@ int arm_cpuidle_simple_enter(struct cpuidle_device *dev, return index; } + +/** + * arm_cpuidle_suspend() - function to enter low power idle states + * @index: an integer used as an identifier for the low level PM callbacks + * + * This function calls the underlying arch specific low level PM code as + * registered at the init time. + * + * Returns -EOPNOTSUPP if no suspend callback is defined, the result of the + * callback otherwise. + */ +int arm_cpuidle_suspend(int index) +{ + int ret = -EOPNOTSUPP; + int cpu = smp_processor_id(); + + if (cpuidle_ops[cpu].suspend) + ret = cpuidle_ops[cpu].suspend(cpu, index); + + return ret; +} + +/** + * arm_cpuidle_get_ops() - find a registered cpuidle_ops by name + * @method: the method name + * + * Search in the __cpuidle_method_of_table array the cpuidle ops matching the + * method name. + * + * Returns a struct cpuidle_ops pointer, NULL if not found. + */ +static struct cpuidle_ops *__init arm_cpuidle_get_ops(const char *method) +{ + struct of_cpuidle_method *m = __cpuidle_method_of_table; + + for (; m->method; m++) + if (!strcmp(m->method, method)) + return m->ops; + + return NULL; +} + +/** + * arm_cpuidle_read_ops() - Initialize the cpuidle ops with the device tree + * @dn: a pointer to a struct device node corresponding to a cpu node + * @cpu: the cpu identifier + * + * Get the method name defined in the 'enable-method' property, retrieve the + * associated cpuidle_ops and do a struct copy. This copy is needed because all + * cpuidle_ops are tagged __initdata and will be unloaded after the init + * process. + * + * Return 0 on sucess, -ENOENT if no 'enable-method' is defined, -EOPNOTSUPP if + * no cpuidle_ops is registered for the 'enable-method'. + */ +static int __init arm_cpuidle_read_ops(struct device_node *dn, int cpu) +{ + const char *enable_method; + struct cpuidle_ops *ops; + + enable_method = of_get_property(dn, "enable-method", NULL); + if (!enable_method) + return -ENOENT; + + ops = arm_cpuidle_get_ops(enable_method); + if (!ops) { + pr_warn("%s: unsupported enable-method property: %s\n", + dn->full_name, enable_method); + return -EOPNOTSUPP; + } + + cpuidle_ops[cpu] = *ops; /* structure copy */ + + pr_notice("cpuidle: enable-method property '%s'" + " found operations\n", enable_method); + + return 0; +} + +/** + * arm_cpuidle_init() - Initialize cpuidle_ops for a specific cpu + * @cpu: the cpu to be initialized + * + * Initialize the cpuidle ops with the device for the cpu and then call + * the cpu's idle initialization callback. This may fail if the underlying HW + * is not operational. + * + * Returns: + * 0 on success, + * -ENODEV if it fails to find the cpu node in the device tree, + * -EOPNOTSUPP if it does not find a registered cpuidle_ops for this cpu, + * -ENOENT if it fails to find an 'enable-method' property, + * -ENXIO if the HW reports a failure or a misconfiguration, + * -ENOMEM if the HW report an memory allocation failure + */ +int __init arm_cpuidle_init(int cpu) +{ + struct device_node *cpu_node = of_cpu_device_node_get(cpu); + int ret; + + if (!cpu_node) + return -ENODEV; + + ret = arm_cpuidle_read_ops(cpu_node, cpu); + if (!ret && cpuidle_ops[cpu].init) + ret = cpuidle_ops[cpu].init(cpu_node, cpu); + + of_node_put(cpu_node); + + return ret; +} diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 672b21942fff..570306c49406 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -545,7 +545,7 @@ ENDPROC(__und_usr) /* * The out of line fixup for the ldrt instructions above. */ - .pushsection .fixup, "ax" + .pushsection .text.fixup, "ax" .align 2 4: str r4, [sp, #S_PC] @ retry current instruction ret r9 diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index cc176b67c134..aebfbf79a1a3 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -80,9 +80,9 @@ ENTRY(stext) ldr r13, =__mmap_switched @ address to jump to after @ initialising sctlr adr lr, BSYM(1f) @ return (PIC) address - ARM( add pc, r10, #PROCINFO_INITFUNC ) - THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( ret r12 ) + ldr r12, [r10, #PROCINFO_INITFUNC] + add r12, r12, r10 + ret r12 1: b __after_proc_init ENDPROC(stext) @@ -117,9 +117,9 @@ ENTRY(secondary_startup) adr lr, BSYM(__after_proc_init) @ return address mov r13, r12 @ __secondary_switched address - ARM( add pc, r10, #PROCINFO_INITFUNC ) - THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( ret r12 ) + ldr r12, [r10, #PROCINFO_INITFUNC] + add r12, r12, r10 + ret r12 ENDPROC(secondary_startup) ENTRY(__secondary_switched) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 01963273c07a..3637973a9708 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -138,9 +138,9 @@ ENTRY(stext) @ mmu has been enabled adr lr, BSYM(1f) @ return (PIC) address mov r8, r4 @ set TTBR1 to swapper_pg_dir - ARM( add pc, r10, #PROCINFO_INITFUNC ) - THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( ret r12 ) + ldr r12, [r10, #PROCINFO_INITFUNC] + add r12, r12, r10 + ret r12 1: b __enable_mmu ENDPROC(stext) .ltorg @@ -386,10 +386,10 @@ ENTRY(secondary_startup) ldr r8, [r7, lr] @ get secondary_data.swapper_pg_dir adr lr, BSYM(__enable_mmu) @ return address mov r13, r12 @ __secondary_switched address - ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor - @ (return control reg) - THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( ret r12 ) + ldr r12, [r10, #PROCINFO_INITFUNC] + add r12, r12, r10 @ initialise processor + @ (return control reg) + ret r12 ENDPROC(secondary_startup) ENDPROC(secondary_startup_arm) diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c index c4cc50e58c13..a71501ff6f18 100644 --- a/arch/arm/kernel/hibernate.c +++ b/arch/arm/kernel/hibernate.c @@ -22,6 +22,7 @@ #include <asm/suspend.h> #include <asm/memory.h> #include <asm/sections.h> +#include "reboot.h" int pfn_is_nosave(unsigned long pfn) { @@ -61,7 +62,7 @@ static int notrace arch_save_image(unsigned long unused) ret = swsusp_save(); if (ret == 0) - soft_restart(virt_to_phys(cpu_resume)); + _soft_restart(virt_to_phys(cpu_resume), false); return ret; } @@ -86,7 +87,7 @@ static void notrace arch_restore_image(void *unused) for (pbe = restore_pblist; pbe; pbe = pbe->next) copy_page(pbe->orig_address, pbe->address); - soft_restart(virt_to_phys(cpu_resume)); + _soft_restart(virt_to_phys(cpu_resume), false); } static u64 resume_stack[PAGE_SIZE/2/sizeof(u64)] __nosavedata; @@ -99,7 +100,6 @@ static u64 resume_stack[PAGE_SIZE/2/sizeof(u64)] __nosavedata; */ int swsusp_arch_resume(void) { - extern void call_with_stack(void (*fn)(void *), void *arg, void *sp); call_with_stack(arch_restore_image, 0, resume_stack + ARRAY_SIZE(resume_stack)); return 0; diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 7fc70ae21185..dc7d0a95bd36 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -648,7 +648,7 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) * Per-cpu breakpoints are not supported by our stepping * mechanism. */ - if (!bp->hw.bp_target) + if (!bp->hw.target) return -EINVAL; /* diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index de2b085ad753..8bf3b7c09888 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -46,7 +46,8 @@ int machine_kexec_prepare(struct kimage *image) * and implements CPU hotplug for the current HW. If not, we won't be * able to kexec reliably, so fail the prepare operation. */ - if (num_possible_cpus() > 1 && !platform_can_cpu_hotplug()) + if (num_possible_cpus() > 1 && platform_can_secondary_boot() && + !platform_can_cpu_hotplug()) return -EINVAL; /* diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 2e11961f65ae..af791f4a6205 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -98,14 +98,19 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, case R_ARM_PC24: case R_ARM_CALL: case R_ARM_JUMP24: + if (sym->st_value & 3) { + pr_err("%s: section %u reloc %u sym '%s': unsupported interworking call (ARM -> Thumb)\n", + module->name, relindex, i, symname); + return -ENOEXEC; + } + offset = __mem_to_opcode_arm(*(u32 *)loc); offset = (offset & 0x00ffffff) << 2; if (offset & 0x02000000) offset -= 0x04000000; offset += sym->st_value - loc; - if (offset & 3 || - offset <= (s32)0xfe000000 || + if (offset <= (s32)0xfe000000 || offset >= (s32)0x02000000) { pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", module->name, relindex, i, symname, @@ -155,6 +160,22 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, #ifdef CONFIG_THUMB2_KERNEL case R_ARM_THM_CALL: case R_ARM_THM_JUMP24: + /* + * For function symbols, only Thumb addresses are + * allowed (no interworking). + * + * For non-function symbols, the destination + * has no specific ARM/Thumb disposition, so + * the branch is resolved under the assumption + * that interworking is not required. + */ + if (ELF32_ST_TYPE(sym->st_info) == STT_FUNC && + !(sym->st_value & 1)) { + pr_err("%s: section %u reloc %u sym '%s': unsupported interworking call (Thumb -> ARM)\n", + module->name, relindex, i, symname); + return -ENOEXEC; + } + upper = __mem_to_opcode_thumb16(*(u16 *)loc); lower = __mem_to_opcode_thumb16(*(u16 *)(loc + 2)); @@ -182,18 +203,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, offset -= 0x02000000; offset += sym->st_value - loc; - /* - * For function symbols, only Thumb addresses are - * allowed (no interworking). - * - * For non-function symbols, the destination - * has no specific ARM/Thumb disposition, so - * the branch is resolved under the assumption - * that interworking is not required. - */ - if ((ELF32_ST_TYPE(sym->st_info) == STT_FUNC && - !(offset & 1)) || - offset <= (s32)0xff000000 || + if (offset <= (s32)0xff000000 || offset >= (s32)0x01000000) { pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", module->name, relindex, i, symname, diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 557e128e4df0..4a86a0133ac3 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -259,20 +259,29 @@ out: } static int -validate_event(struct pmu_hw_events *hw_events, - struct perf_event *event) +validate_event(struct pmu *pmu, struct pmu_hw_events *hw_events, + struct perf_event *event) { - struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct arm_pmu *armpmu; if (is_software_event(event)) return 1; + /* + * Reject groups spanning multiple HW PMUs (e.g. CPU + CCI). The + * core perf code won't check that the pmu->ctx == leader->ctx + * until after pmu->event_init(event). + */ + if (event->pmu != pmu) + return 0; + if (event->state < PERF_EVENT_STATE_OFF) return 1; if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec) return 1; + armpmu = to_arm_pmu(event->pmu); return armpmu->get_event_idx(hw_events, event) >= 0; } @@ -288,15 +297,15 @@ validate_group(struct perf_event *event) */ memset(&fake_pmu.used_mask, 0, sizeof(fake_pmu.used_mask)); - if (!validate_event(&fake_pmu, leader)) + if (!validate_event(event->pmu, &fake_pmu, leader)) return -EINVAL; list_for_each_entry(sibling, &leader->sibling_list, group_entry) { - if (!validate_event(&fake_pmu, sibling)) + if (!validate_event(event->pmu, &fake_pmu, sibling)) return -EINVAL; } - if (!validate_event(&fake_pmu, event)) + if (!validate_event(event->pmu, &fake_pmu, event)) return -EINVAL; return 0; diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index 61b53c46edfa..91c7ba182dcd 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -92,11 +92,16 @@ static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu) free_percpu_irq(irq, &hw_events->percpu_pmu); } else { for (i = 0; i < irqs; ++i) { - if (!cpumask_test_and_clear_cpu(i, &cpu_pmu->active_irqs)) + int cpu = i; + + if (cpu_pmu->irq_affinity) + cpu = cpu_pmu->irq_affinity[i]; + + if (!cpumask_test_and_clear_cpu(cpu, &cpu_pmu->active_irqs)) continue; irq = platform_get_irq(pmu_device, i); if (irq >= 0) - free_irq(irq, per_cpu_ptr(&hw_events->percpu_pmu, i)); + free_irq(irq, per_cpu_ptr(&hw_events->percpu_pmu, cpu)); } } } @@ -128,32 +133,37 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler) on_each_cpu(cpu_pmu_enable_percpu_irq, &irq, 1); } else { for (i = 0; i < irqs; ++i) { + int cpu = i; + err = 0; irq = platform_get_irq(pmu_device, i); if (irq < 0) continue; + if (cpu_pmu->irq_affinity) + cpu = cpu_pmu->irq_affinity[i]; + /* * If we have a single PMU interrupt that we can't shift, * assume that we're running on a uniprocessor machine and * continue. Otherwise, continue without this interrupt. */ - if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) { + if (irq_set_affinity(irq, cpumask_of(cpu)) && irqs > 1) { pr_warn("unable to set irq affinity (irq=%d, cpu=%u)\n", - irq, i); + irq, cpu); continue; } err = request_irq(irq, handler, IRQF_NOBALANCING | IRQF_NO_THREAD, "arm-pmu", - per_cpu_ptr(&hw_events->percpu_pmu, i)); + per_cpu_ptr(&hw_events->percpu_pmu, cpu)); if (err) { pr_err("unable to request IRQ%d for ARM PMU counters\n", irq); return err; } - cpumask_set_cpu(i, &cpu_pmu->active_irqs); + cpumask_set_cpu(cpu, &cpu_pmu->active_irqs); } } @@ -243,6 +253,8 @@ static const struct of_device_id cpu_pmu_of_device_ids[] = { {.compatible = "arm,arm1176-pmu", .data = armv6_1176_pmu_init}, {.compatible = "arm,arm1136-pmu", .data = armv6_1136_pmu_init}, {.compatible = "qcom,krait-pmu", .data = krait_pmu_init}, + {.compatible = "qcom,scorpion-pmu", .data = scorpion_pmu_init}, + {.compatible = "qcom,scorpion-mp-pmu", .data = scorpion_mp_pmu_init}, {}, }; @@ -289,6 +301,48 @@ static int probe_current_pmu(struct arm_pmu *pmu) return ret; } +static int of_pmu_irq_cfg(struct platform_device *pdev) +{ + int i; + int *irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL); + + if (!irqs) + return -ENOMEM; + + for (i = 0; i < pdev->num_resources; ++i) { + struct device_node *dn; + int cpu; + + dn = of_parse_phandle(pdev->dev.of_node, "interrupt-affinity", + i); + if (!dn) { + pr_warn("Failed to parse %s/interrupt-affinity[%d]\n", + of_node_full_name(dn), i); + break; + } + + for_each_possible_cpu(cpu) + if (arch_find_n_match_cpu_physical_id(dn, cpu, NULL)) + break; + + of_node_put(dn); + if (cpu >= nr_cpu_ids) { + pr_warn("Failed to find logical CPU for %s\n", + dn->name); + break; + } + + irqs[i] = cpu; + } + + if (i == pdev->num_resources) + cpu_pmu->irq_affinity = irqs; + else + kfree(irqs); + + return 0; +} + static int cpu_pmu_device_probe(struct platform_device *pdev) { const struct of_device_id *of_id; @@ -313,7 +367,10 @@ static int cpu_pmu_device_probe(struct platform_device *pdev) if (node && (of_id = of_match_node(cpu_pmu_of_device_ids, pdev->dev.of_node))) { init_fn = of_id->data; - ret = init_fn(pmu); + + ret = of_pmu_irq_cfg(pdev); + if (!ret) + ret = init_fn(pmu); } else { ret = probe_current_pmu(pmu); } diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 8993770c47de..f4207a4dcb01 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -140,6 +140,23 @@ enum krait_perf_types { KRAIT_PERFCTR_L1_DTLB_ACCESS = 0x12210, }; +/* ARMv7 Scorpion specific event types */ +enum scorpion_perf_types { + SCORPION_LPM0_GROUP0 = 0x4c, + SCORPION_LPM1_GROUP0 = 0x50, + SCORPION_LPM2_GROUP0 = 0x54, + SCORPION_L2LPM_GROUP0 = 0x58, + SCORPION_VLPM_GROUP0 = 0x5c, + + SCORPION_ICACHE_ACCESS = 0x10053, + SCORPION_ICACHE_MISS = 0x10052, + + SCORPION_DTLB_ACCESS = 0x12013, + SCORPION_DTLB_MISS = 0x12012, + + SCORPION_ITLB_MISS = 0x12021, +}; + /* * Cortex-A8 HW events mapping * @@ -482,6 +499,49 @@ static const unsigned krait_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] }; /* + * Scorpion HW events mapping + */ +static const unsigned scorpion_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, + [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, +}; + +static const unsigned scorpion_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + PERF_CACHE_MAP_ALL_UNSUPPORTED, + /* + * The performance counters don't differentiate between read and write + * accesses/misses so this isn't strictly correct, but it's the best we + * can do. Writes and reads get combined. + */ + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = SCORPION_ICACHE_ACCESS, + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = SCORPION_ICACHE_MISS, + /* + * Only ITLB misses and DTLB refills are supported. If users want the + * DTLB refills misses a raw counter must be used. + */ + [C(DTLB)][C(OP_READ)][C(RESULT_ACCESS)] = SCORPION_DTLB_ACCESS, + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = SCORPION_DTLB_MISS, + [C(DTLB)][C(OP_WRITE)][C(RESULT_ACCESS)] = SCORPION_DTLB_ACCESS, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = SCORPION_DTLB_MISS, + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = SCORPION_ITLB_MISS, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = SCORPION_ITLB_MISS, + [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, +}; + +/* * Perf Events' indices */ #define ARMV7_IDX_CYCLE_COUNTER 0 @@ -976,6 +1036,12 @@ static int krait_map_event_no_branch(struct perf_event *event) &krait_perf_cache_map, 0xFFFFF); } +static int scorpion_map_event(struct perf_event *event) +{ + return armpmu_map_event(event, &scorpion_perf_map, + &scorpion_perf_cache_map, 0xFFFFF); +} + static void armv7pmu_init(struct arm_pmu *cpu_pmu) { cpu_pmu->handle_irq = armv7pmu_handle_irq; @@ -1103,6 +1169,12 @@ static int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu) #define KRAIT_EVENT_MASK (KRAIT_EVENT | VENUM_EVENT) #define PMRESRn_EN BIT(31) +#define EVENT_REGION(event) (((event) >> 12) & 0xf) /* R */ +#define EVENT_GROUP(event) ((event) & 0xf) /* G */ +#define EVENT_CODE(event) (((event) >> 4) & 0xff) /* CC */ +#define EVENT_VENUM(event) (!!(event & VENUM_EVENT)) /* N=2 */ +#define EVENT_CPU(event) (!!(event & KRAIT_EVENT)) /* N=1 */ + static u32 krait_read_pmresrn(int n) { u32 val; @@ -1141,19 +1213,19 @@ static void krait_write_pmresrn(int n, u32 val) } } -static u32 krait_read_vpmresr0(void) +static u32 venum_read_pmresr(void) { u32 val; asm volatile("mrc p10, 7, %0, c11, c0, 0" : "=r" (val)); return val; } -static void krait_write_vpmresr0(u32 val) +static void venum_write_pmresr(u32 val) { asm volatile("mcr p10, 7, %0, c11, c0, 0" : : "r" (val)); } -static void krait_pre_vpmresr0(u32 *venum_orig_val, u32 *fp_orig_val) +static void venum_pre_pmresr(u32 *venum_orig_val, u32 *fp_orig_val) { u32 venum_new_val; u32 fp_new_val; @@ -1170,7 +1242,7 @@ static void krait_pre_vpmresr0(u32 *venum_orig_val, u32 *fp_orig_val) fmxr(FPEXC, fp_new_val); } -static void krait_post_vpmresr0(u32 venum_orig_val, u32 fp_orig_val) +static void venum_post_pmresr(u32 venum_orig_val, u32 fp_orig_val) { BUG_ON(preemptible()); /* Restore FPEXC */ @@ -1193,16 +1265,11 @@ static void krait_evt_setup(int idx, u32 config_base) u32 val; u32 mask; u32 vval, fval; - unsigned int region; - unsigned int group; - unsigned int code; + unsigned int region = EVENT_REGION(config_base); + unsigned int group = EVENT_GROUP(config_base); + unsigned int code = EVENT_CODE(config_base); unsigned int group_shift; - bool venum_event; - - venum_event = !!(config_base & VENUM_EVENT); - region = (config_base >> 12) & 0xf; - code = (config_base >> 4) & 0xff; - group = (config_base >> 0) & 0xf; + bool venum_event = EVENT_VENUM(config_base); group_shift = group * 8; mask = 0xff << group_shift; @@ -1217,16 +1284,14 @@ static void krait_evt_setup(int idx, u32 config_base) val |= config_base & (ARMV7_EXCLUDE_USER | ARMV7_EXCLUDE_PL1); armv7_pmnc_write_evtsel(idx, val); - asm volatile("mcr p15, 0, %0, c9, c15, 0" : : "r" (0)); - if (venum_event) { - krait_pre_vpmresr0(&vval, &fval); - val = krait_read_vpmresr0(); + venum_pre_pmresr(&vval, &fval); + val = venum_read_pmresr(); val &= ~mask; val |= code << group_shift; val |= PMRESRn_EN; - krait_write_vpmresr0(val); - krait_post_vpmresr0(vval, fval); + venum_write_pmresr(val); + venum_post_pmresr(vval, fval); } else { val = krait_read_pmresrn(region); val &= ~mask; @@ -1236,7 +1301,7 @@ static void krait_evt_setup(int idx, u32 config_base) } } -static u32 krait_clear_pmresrn_group(u32 val, int group) +static u32 clear_pmresrn_group(u32 val, int group) { u32 mask; int group_shift; @@ -1256,23 +1321,19 @@ static void krait_clearpmu(u32 config_base) { u32 val; u32 vval, fval; - unsigned int region; - unsigned int group; - bool venum_event; - - venum_event = !!(config_base & VENUM_EVENT); - region = (config_base >> 12) & 0xf; - group = (config_base >> 0) & 0xf; + unsigned int region = EVENT_REGION(config_base); + unsigned int group = EVENT_GROUP(config_base); + bool venum_event = EVENT_VENUM(config_base); if (venum_event) { - krait_pre_vpmresr0(&vval, &fval); - val = krait_read_vpmresr0(); - val = krait_clear_pmresrn_group(val, group); - krait_write_vpmresr0(val); - krait_post_vpmresr0(vval, fval); + venum_pre_pmresr(&vval, &fval); + val = venum_read_pmresr(); + val = clear_pmresrn_group(val, group); + venum_write_pmresr(val); + venum_post_pmresr(vval, fval); } else { val = krait_read_pmresrn(region); - val = krait_clear_pmresrn_group(val, group); + val = clear_pmresrn_group(val, group); krait_write_pmresrn(region, val); } } @@ -1342,6 +1403,8 @@ static void krait_pmu_enable_event(struct perf_event *event) static void krait_pmu_reset(void *info) { u32 vval, fval; + struct arm_pmu *cpu_pmu = info; + u32 idx, nb_cnt = cpu_pmu->num_events; armv7pmu_reset(info); @@ -1350,9 +1413,16 @@ static void krait_pmu_reset(void *info) krait_write_pmresrn(1, 0); krait_write_pmresrn(2, 0); - krait_pre_vpmresr0(&vval, &fval); - krait_write_vpmresr0(0); - krait_post_vpmresr0(vval, fval); + venum_pre_pmresr(&vval, &fval); + venum_write_pmresr(0); + venum_post_pmresr(vval, fval); + + /* Reset PMxEVNCTCR to sane default */ + for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) { + armv7_pmnc_select_counter(idx); + asm volatile("mcr p15, 0, %0, c9, c15, 0" : : "r" (0)); + } + } static int krait_event_to_bit(struct perf_event *event, unsigned int region, @@ -1386,26 +1456,18 @@ static int krait_pmu_get_event_idx(struct pmu_hw_events *cpuc, { int idx; int bit = -1; - unsigned int prefix; - unsigned int region; - unsigned int code; - unsigned int group; - bool krait_event; struct hw_perf_event *hwc = &event->hw; + unsigned int region = EVENT_REGION(hwc->config_base); + unsigned int code = EVENT_CODE(hwc->config_base); + unsigned int group = EVENT_GROUP(hwc->config_base); + bool venum_event = EVENT_VENUM(hwc->config_base); + bool krait_event = EVENT_CPU(hwc->config_base); - region = (hwc->config_base >> 12) & 0xf; - code = (hwc->config_base >> 4) & 0xff; - group = (hwc->config_base >> 0) & 0xf; - krait_event = !!(hwc->config_base & KRAIT_EVENT_MASK); - - if (krait_event) { + if (venum_event || krait_event) { /* Ignore invalid events */ if (group > 3 || region > 2) return -EINVAL; - prefix = hwc->config_base & KRAIT_EVENT_MASK; - if (prefix != KRAIT_EVENT && prefix != VENUM_EVENT) - return -EINVAL; - if (prefix == VENUM_EVENT && (code & 0xe0)) + if (venum_event && (code & 0xe0)) return -EINVAL; bit = krait_event_to_bit(event, region, group); @@ -1425,15 +1487,12 @@ static void krait_pmu_clear_event_idx(struct pmu_hw_events *cpuc, { int bit; struct hw_perf_event *hwc = &event->hw; - unsigned int region; - unsigned int group; - bool krait_event; + unsigned int region = EVENT_REGION(hwc->config_base); + unsigned int group = EVENT_GROUP(hwc->config_base); + bool venum_event = EVENT_VENUM(hwc->config_base); + bool krait_event = EVENT_CPU(hwc->config_base); - region = (hwc->config_base >> 12) & 0xf; - group = (hwc->config_base >> 0) & 0xf; - krait_event = !!(hwc->config_base & KRAIT_EVENT_MASK); - - if (krait_event) { + if (venum_event || krait_event) { bit = krait_event_to_bit(event, region, group); clear_bit(bit, cpuc->used_mask); } @@ -1458,6 +1517,344 @@ static int krait_pmu_init(struct arm_pmu *cpu_pmu) cpu_pmu->clear_event_idx = krait_pmu_clear_event_idx; return 0; } + +/* + * Scorpion Local Performance Monitor Register (LPMn) + * + * 31 30 24 16 8 0 + * +--------------------------------+ + * LPM0 | EN | CC | CC | CC | CC | N = 1, R = 0 + * +--------------------------------+ + * LPM1 | EN | CC | CC | CC | CC | N = 1, R = 1 + * +--------------------------------+ + * LPM2 | EN | CC | CC | CC | CC | N = 1, R = 2 + * +--------------------------------+ + * L2LPM | EN | CC | CC | CC | CC | N = 1, R = 3 + * +--------------------------------+ + * VLPM | EN | CC | CC | CC | CC | N = 2, R = ? + * +--------------------------------+ + * EN | G=3 | G=2 | G=1 | G=0 + * + * + * Event Encoding: + * + * hwc->config_base = 0xNRCCG + * + * N = prefix, 1 for Scorpion CPU (LPMn/L2LPM), 2 for Venum VFP (VLPM) + * R = region register + * CC = class of events the group G is choosing from + * G = group or particular event + * + * Example: 0x12021 is a Scorpion CPU event in LPM2's group 1 with code 2 + * + * A region (R) corresponds to a piece of the CPU (execution unit, instruction + * unit, etc.) while the event code (CC) corresponds to a particular class of + * events (interrupts for example). An event code is broken down into + * groups (G) that can be mapped into the PMU (irq, fiqs, and irq+fiqs for + * example). + */ + +static u32 scorpion_read_pmresrn(int n) +{ + u32 val; + + switch (n) { + case 0: + asm volatile("mrc p15, 0, %0, c15, c0, 0" : "=r" (val)); + break; + case 1: + asm volatile("mrc p15, 1, %0, c15, c0, 0" : "=r" (val)); + break; + case 2: + asm volatile("mrc p15, 2, %0, c15, c0, 0" : "=r" (val)); + break; + case 3: + asm volatile("mrc p15, 3, %0, c15, c2, 0" : "=r" (val)); + break; + default: + BUG(); /* Should be validated in scorpion_pmu_get_event_idx() */ + } + + return val; +} + +static void scorpion_write_pmresrn(int n, u32 val) +{ + switch (n) { + case 0: + asm volatile("mcr p15, 0, %0, c15, c0, 0" : : "r" (val)); + break; + case 1: + asm volatile("mcr p15, 1, %0, c15, c0, 0" : : "r" (val)); + break; + case 2: + asm volatile("mcr p15, 2, %0, c15, c0, 0" : : "r" (val)); + break; + case 3: + asm volatile("mcr p15, 3, %0, c15, c2, 0" : : "r" (val)); + break; + default: + BUG(); /* Should be validated in scorpion_pmu_get_event_idx() */ + } +} + +static u32 scorpion_get_pmresrn_event(unsigned int region) +{ + static const u32 pmresrn_table[] = { SCORPION_LPM0_GROUP0, + SCORPION_LPM1_GROUP0, + SCORPION_LPM2_GROUP0, + SCORPION_L2LPM_GROUP0 }; + return pmresrn_table[region]; +} + +static void scorpion_evt_setup(int idx, u32 config_base) +{ + u32 val; + u32 mask; + u32 vval, fval; + unsigned int region = EVENT_REGION(config_base); + unsigned int group = EVENT_GROUP(config_base); + unsigned int code = EVENT_CODE(config_base); + unsigned int group_shift; + bool venum_event = EVENT_VENUM(config_base); + + group_shift = group * 8; + mask = 0xff << group_shift; + + /* Configure evtsel for the region and group */ + if (venum_event) + val = SCORPION_VLPM_GROUP0; + else + val = scorpion_get_pmresrn_event(region); + val += group; + /* Mix in mode-exclusion bits */ + val |= config_base & (ARMV7_EXCLUDE_USER | ARMV7_EXCLUDE_PL1); + armv7_pmnc_write_evtsel(idx, val); + + asm volatile("mcr p15, 0, %0, c9, c15, 0" : : "r" (0)); + + if (venum_event) { + venum_pre_pmresr(&vval, &fval); + val = venum_read_pmresr(); + val &= ~mask; + val |= code << group_shift; + val |= PMRESRn_EN; + venum_write_pmresr(val); + venum_post_pmresr(vval, fval); + } else { + val = scorpion_read_pmresrn(region); + val &= ~mask; + val |= code << group_shift; + val |= PMRESRn_EN; + scorpion_write_pmresrn(region, val); + } +} + +static void scorpion_clearpmu(u32 config_base) +{ + u32 val; + u32 vval, fval; + unsigned int region = EVENT_REGION(config_base); + unsigned int group = EVENT_GROUP(config_base); + bool venum_event = EVENT_VENUM(config_base); + + if (venum_event) { + venum_pre_pmresr(&vval, &fval); + val = venum_read_pmresr(); + val = clear_pmresrn_group(val, group); + venum_write_pmresr(val); + venum_post_pmresr(vval, fval); + } else { + val = scorpion_read_pmresrn(region); + val = clear_pmresrn_group(val, group); + scorpion_write_pmresrn(region, val); + } +} + +static void scorpion_pmu_disable_event(struct perf_event *event) +{ + unsigned long flags; + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events); + + /* Disable counter and interrupt */ + raw_spin_lock_irqsave(&events->pmu_lock, flags); + + /* Disable counter */ + armv7_pmnc_disable_counter(idx); + + /* + * Clear pmresr code (if destined for PMNx counters) + */ + if (hwc->config_base & KRAIT_EVENT_MASK) + scorpion_clearpmu(hwc->config_base); + + /* Disable interrupt for this counter */ + armv7_pmnc_disable_intens(idx); + + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static void scorpion_pmu_enable_event(struct perf_event *event) +{ + unsigned long flags; + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events); + + /* + * Enable counter and interrupt, and set the counter to count + * the event that we're interested in. + */ + raw_spin_lock_irqsave(&events->pmu_lock, flags); + + /* Disable counter */ + armv7_pmnc_disable_counter(idx); + + /* + * Set event (if destined for PMNx counters) + * We don't set the event for the cycle counter because we + * don't have the ability to perform event filtering. + */ + if (hwc->config_base & KRAIT_EVENT_MASK) + scorpion_evt_setup(idx, hwc->config_base); + else if (idx != ARMV7_IDX_CYCLE_COUNTER) + armv7_pmnc_write_evtsel(idx, hwc->config_base); + + /* Enable interrupt for this counter */ + armv7_pmnc_enable_intens(idx); + + /* Enable counter */ + armv7_pmnc_enable_counter(idx); + + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static void scorpion_pmu_reset(void *info) +{ + u32 vval, fval; + struct arm_pmu *cpu_pmu = info; + u32 idx, nb_cnt = cpu_pmu->num_events; + + armv7pmu_reset(info); + + /* Clear all pmresrs */ + scorpion_write_pmresrn(0, 0); + scorpion_write_pmresrn(1, 0); + scorpion_write_pmresrn(2, 0); + scorpion_write_pmresrn(3, 0); + + venum_pre_pmresr(&vval, &fval); + venum_write_pmresr(0); + venum_post_pmresr(vval, fval); + + /* Reset PMxEVNCTCR to sane default */ + for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) { + armv7_pmnc_select_counter(idx); + asm volatile("mcr p15, 0, %0, c9, c15, 0" : : "r" (0)); + } +} + +static int scorpion_event_to_bit(struct perf_event *event, unsigned int region, + unsigned int group) +{ + int bit; + struct hw_perf_event *hwc = &event->hw; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + + if (hwc->config_base & VENUM_EVENT) + bit = SCORPION_VLPM_GROUP0; + else + bit = scorpion_get_pmresrn_event(region); + bit -= scorpion_get_pmresrn_event(0); + bit += group; + /* + * Lower bits are reserved for use by the counters (see + * armv7pmu_get_event_idx() for more info) + */ + bit += ARMV7_IDX_COUNTER_LAST(cpu_pmu) + 1; + + return bit; +} + +/* + * We check for column exclusion constraints here. + * Two events cant use the same group within a pmresr register. + */ +static int scorpion_pmu_get_event_idx(struct pmu_hw_events *cpuc, + struct perf_event *event) +{ + int idx; + int bit = -1; + struct hw_perf_event *hwc = &event->hw; + unsigned int region = EVENT_REGION(hwc->config_base); + unsigned int group = EVENT_GROUP(hwc->config_base); + bool venum_event = EVENT_VENUM(hwc->config_base); + bool scorpion_event = EVENT_CPU(hwc->config_base); + + if (venum_event || scorpion_event) { + /* Ignore invalid events */ + if (group > 3 || region > 3) + return -EINVAL; + + bit = scorpion_event_to_bit(event, region, group); + if (test_and_set_bit(bit, cpuc->used_mask)) + return -EAGAIN; + } + + idx = armv7pmu_get_event_idx(cpuc, event); + if (idx < 0 && bit >= 0) + clear_bit(bit, cpuc->used_mask); + + return idx; +} + +static void scorpion_pmu_clear_event_idx(struct pmu_hw_events *cpuc, + struct perf_event *event) +{ + int bit; + struct hw_perf_event *hwc = &event->hw; + unsigned int region = EVENT_REGION(hwc->config_base); + unsigned int group = EVENT_GROUP(hwc->config_base); + bool venum_event = EVENT_VENUM(hwc->config_base); + bool scorpion_event = EVENT_CPU(hwc->config_base); + + if (venum_event || scorpion_event) { + bit = scorpion_event_to_bit(event, region, group); + clear_bit(bit, cpuc->used_mask); + } +} + +static int scorpion_pmu_init(struct arm_pmu *cpu_pmu) +{ + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "armv7_scorpion"; + cpu_pmu->map_event = scorpion_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + cpu_pmu->reset = scorpion_pmu_reset; + cpu_pmu->enable = scorpion_pmu_enable_event; + cpu_pmu->disable = scorpion_pmu_disable_event; + cpu_pmu->get_event_idx = scorpion_pmu_get_event_idx; + cpu_pmu->clear_event_idx = scorpion_pmu_clear_event_idx; + return 0; +} + +static int scorpion_mp_pmu_init(struct arm_pmu *cpu_pmu) +{ + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "armv7_scorpion_mp"; + cpu_pmu->map_event = scorpion_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + cpu_pmu->reset = scorpion_pmu_reset; + cpu_pmu->enable = scorpion_pmu_enable_event; + cpu_pmu->disable = scorpion_pmu_disable_event; + cpu_pmu->get_event_idx = scorpion_pmu_get_event_idx; + cpu_pmu->clear_event_idx = scorpion_pmu_clear_event_idx; + return 0; +} #else static inline int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) { @@ -1498,4 +1895,14 @@ static inline int krait_pmu_init(struct arm_pmu *cpu_pmu) { return -ENODEV; } + +static inline int scorpion_pmu_init(struct arm_pmu *cpu_pmu) +{ + return -ENODEV; +} + +static inline int scorpion_mp_pmu_init(struct arm_pmu *cpu_pmu) +{ + return -ENODEV; +} #endif /* CONFIG_CPU_V7 */ diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index fdfa3a78ec8c..f192a2a41719 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -17,12 +17,9 @@ #include <linux/stddef.h> #include <linux/unistd.h> #include <linux/user.h> -#include <linux/delay.h> -#include <linux/reboot.h> #include <linux/interrupt.h> #include <linux/kallsyms.h> #include <linux/init.h> -#include <linux/cpu.h> #include <linux/elfcore.h> #include <linux/pm.h> #include <linux/tick.h> @@ -31,16 +28,14 @@ #include <linux/random.h> #include <linux/hw_breakpoint.h> #include <linux/leds.h> -#include <linux/reboot.h> -#include <asm/cacheflush.h> -#include <asm/idmap.h> #include <asm/processor.h> #include <asm/thread_notify.h> #include <asm/stacktrace.h> #include <asm/system_misc.h> #include <asm/mach/time.h> #include <asm/tls.h> +#include <asm/vdso.h> #ifdef CONFIG_CC_STACKPROTECTOR #include <linux/stackprotector.h> @@ -59,69 +54,6 @@ static const char *isa_modes[] __maybe_unused = { "ARM" , "Thumb" , "Jazelle", "ThumbEE" }; -extern void call_with_stack(void (*fn)(void *), void *arg, void *sp); -typedef void (*phys_reset_t)(unsigned long); - -/* - * A temporary stack to use for CPU reset. This is static so that we - * don't clobber it with the identity mapping. When running with this - * stack, any references to the current task *will not work* so you - * should really do as little as possible before jumping to your reset - * code. - */ -static u64 soft_restart_stack[16]; - -static void __soft_restart(void *addr) -{ - phys_reset_t phys_reset; - - /* Take out a flat memory mapping. */ - setup_mm_for_reboot(); - - /* Clean and invalidate caches */ - flush_cache_all(); - - /* Turn off caching */ - cpu_proc_fin(); - - /* Push out any further dirty data, and ensure cache is empty */ - flush_cache_all(); - - /* Switch to the identity mapping. */ - phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); - phys_reset((unsigned long)addr); - - /* Should never get here. */ - BUG(); -} - -void soft_restart(unsigned long addr) -{ - u64 *stack = soft_restart_stack + ARRAY_SIZE(soft_restart_stack); - - /* Disable interrupts first */ - raw_local_irq_disable(); - local_fiq_disable(); - - /* Disable the L2 if we're the last man standing. */ - if (num_online_cpus() == 1) - outer_disable(); - - /* Change to the new stack and continue with the reset. */ - call_with_stack(__soft_restart, (void *)addr, (void *)stack); - - /* Should never get here. */ - BUG(); -} - -/* - * Function pointers to optional machine specific functions - */ -void (*pm_power_off)(void); -EXPORT_SYMBOL(pm_power_off); - -void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd); - /* * This is our default idle handler. */ @@ -166,79 +98,6 @@ void arch_cpu_idle_dead(void) } #endif -/* - * Called by kexec, immediately prior to machine_kexec(). - * - * This must completely disable all secondary CPUs; simply causing those CPUs - * to execute e.g. a RAM-based pin loop is not sufficient. This allows the - * kexec'd kernel to use any and all RAM as it sees fit, without having to - * avoid any code or data used by any SW CPU pin loop. The CPU hotplug - * functionality embodied in disable_nonboot_cpus() to achieve this. - */ -void machine_shutdown(void) -{ - disable_nonboot_cpus(); -} - -/* - * Halting simply requires that the secondary CPUs stop performing any - * activity (executing tasks, handling interrupts). smp_send_stop() - * achieves this. - */ -void machine_halt(void) -{ - local_irq_disable(); - smp_send_stop(); - - local_irq_disable(); - while (1); -} - -/* - * Power-off simply requires that the secondary CPUs stop performing any - * activity (executing tasks, handling interrupts). smp_send_stop() - * achieves this. When the system power is turned off, it will take all CPUs - * with it. - */ -void machine_power_off(void) -{ - local_irq_disable(); - smp_send_stop(); - - if (pm_power_off) - pm_power_off(); -} - -/* - * Restart requires that the secondary CPUs stop performing any activity - * while the primary CPU resets the system. Systems with a single CPU can - * use soft_restart() as their machine descriptor's .restart hook, since that - * will cause the only available CPU to reset. Systems with multiple CPUs must - * provide a HW restart implementation, to ensure that all CPUs reset at once. - * This is required so that any code running after reset on the primary CPU - * doesn't have to co-ordinate with other CPUs to ensure they aren't still - * executing pre-reset code, and using RAM that the primary CPU's code wishes - * to use. Implementing such co-ordination would be essentially impossible. - */ -void machine_restart(char *cmd) -{ - local_irq_disable(); - smp_send_stop(); - - if (arm_pm_restart) - arm_pm_restart(reboot_mode, cmd); - else - do_kernel_restart(cmd); - - /* Give a grace period for failure to restart of 1s */ - mdelay(1000); - - /* Whoops - the platform was unable to reboot. Tell the user! */ - printk("Reboot failed -- System halted\n"); - local_irq_disable(); - while (1); -} - void __show_regs(struct pt_regs *regs) { unsigned long flags; @@ -475,7 +334,7 @@ const char *arch_vma_name(struct vm_area_struct *vma) } /* If possible, provide a placement hint at a random offset from the - * stack for the signal page. + * stack for the sigpage and vdso pages. */ static unsigned long sigpage_addr(const struct mm_struct *mm, unsigned int npages) @@ -519,6 +378,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) { struct mm_struct *mm = current->mm; struct vm_area_struct *vma; + unsigned long npages; unsigned long addr; unsigned long hint; int ret = 0; @@ -528,9 +388,12 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) if (!signal_page) return -ENOMEM; + npages = 1; /* for sigpage */ + npages += vdso_total_pages; + down_write(&mm->mmap_sem); - hint = sigpage_addr(mm, 1); - addr = get_unmapped_area(NULL, hint, PAGE_SIZE, 0, 0); + hint = sigpage_addr(mm, npages); + addr = get_unmapped_area(NULL, hint, npages << PAGE_SHIFT, 0, 0); if (IS_ERR_VALUE(addr)) { ret = addr; goto up_fail; @@ -547,6 +410,12 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) mm->context.sigpage = addr; + /* Unlike the sigpage, failure to install the vdso is unlikely + * to be fatal to the process, so no error check needed + * here. + */ + arm_install_vdso(mm, addr + PAGE_SIZE); + up_fail: up_write(&mm->mmap_sem); return ret; diff --git a/arch/arm/kernel/psci-call.S b/arch/arm/kernel/psci-call.S new file mode 100644 index 000000000000..a78e9e1e206d --- /dev/null +++ b/arch/arm/kernel/psci-call.S @@ -0,0 +1,31 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2015 ARM Limited + * + * Author: Mark Rutland <mark.rutland@arm.com> + */ + +#include <linux/linkage.h> + +#include <asm/opcodes-sec.h> +#include <asm/opcodes-virt.h> + +/* int __invoke_psci_fn_hvc(u32 function_id, u32 arg0, u32 arg1, u32 arg2) */ +ENTRY(__invoke_psci_fn_hvc) + __HVC(0) + bx lr +ENDPROC(__invoke_psci_fn_hvc) + +/* int __invoke_psci_fn_smc(u32 function_id, u32 arg0, u32 arg1, u32 arg2) */ +ENTRY(__invoke_psci_fn_smc) + __SMC(0) + bx lr +ENDPROC(__invoke_psci_fn_smc) diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c index f73891b6b730..f90fdf4ce7c7 100644 --- a/arch/arm/kernel/psci.c +++ b/arch/arm/kernel/psci.c @@ -23,8 +23,6 @@ #include <asm/compiler.h> #include <asm/errno.h> -#include <asm/opcodes-sec.h> -#include <asm/opcodes-virt.h> #include <asm/psci.h> #include <asm/system_misc.h> @@ -33,6 +31,9 @@ struct psci_operations psci_ops; static int (*invoke_psci_fn)(u32, u32, u32, u32); typedef int (*psci_initcall_t)(const struct device_node *); +asmlinkage int __invoke_psci_fn_hvc(u32, u32, u32, u32); +asmlinkage int __invoke_psci_fn_smc(u32, u32, u32, u32); + enum psci_function { PSCI_FN_CPU_SUSPEND, PSCI_FN_CPU_ON, @@ -71,40 +72,6 @@ static u32 psci_power_state_pack(struct psci_power_state state) & PSCI_0_2_POWER_STATE_AFFL_MASK); } -/* - * The following two functions are invoked via the invoke_psci_fn pointer - * and will not be inlined, allowing us to piggyback on the AAPCS. - */ -static noinline int __invoke_psci_fn_hvc(u32 function_id, u32 arg0, u32 arg1, - u32 arg2) -{ - asm volatile( - __asmeq("%0", "r0") - __asmeq("%1", "r1") - __asmeq("%2", "r2") - __asmeq("%3", "r3") - __HVC(0) - : "+r" (function_id) - : "r" (arg0), "r" (arg1), "r" (arg2)); - - return function_id; -} - -static noinline int __invoke_psci_fn_smc(u32 function_id, u32 arg0, u32 arg1, - u32 arg2) -{ - asm volatile( - __asmeq("%0", "r0") - __asmeq("%1", "r1") - __asmeq("%2", "r2") - __asmeq("%3", "r3") - __SMC(0) - : "+r" (function_id) - : "r" (arg0), "r" (arg1), "r" (arg2)); - - return function_id; -} - static int psci_get_version(void) { int err; diff --git a/arch/arm/kernel/reboot.c b/arch/arm/kernel/reboot.c new file mode 100644 index 000000000000..1a4d232796be --- /dev/null +++ b/arch/arm/kernel/reboot.c @@ -0,0 +1,155 @@ +/* + * Copyright (C) 1996-2000 Russell King - Converted to ARM. + * Original Copyright (C) 1995 Linus Torvalds + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/cpu.h> +#include <linux/delay.h> +#include <linux/reboot.h> + +#include <asm/cacheflush.h> +#include <asm/idmap.h> + +#include "reboot.h" + +typedef void (*phys_reset_t)(unsigned long); + +/* + * Function pointers to optional machine specific functions + */ +void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd); +void (*pm_power_off)(void); +EXPORT_SYMBOL(pm_power_off); + +/* + * A temporary stack to use for CPU reset. This is static so that we + * don't clobber it with the identity mapping. When running with this + * stack, any references to the current task *will not work* so you + * should really do as little as possible before jumping to your reset + * code. + */ +static u64 soft_restart_stack[16]; + +static void __soft_restart(void *addr) +{ + phys_reset_t phys_reset; + + /* Take out a flat memory mapping. */ + setup_mm_for_reboot(); + + /* Clean and invalidate caches */ + flush_cache_all(); + + /* Turn off caching */ + cpu_proc_fin(); + + /* Push out any further dirty data, and ensure cache is empty */ + flush_cache_all(); + + /* Switch to the identity mapping. */ + phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); + phys_reset((unsigned long)addr); + + /* Should never get here. */ + BUG(); +} + +void _soft_restart(unsigned long addr, bool disable_l2) +{ + u64 *stack = soft_restart_stack + ARRAY_SIZE(soft_restart_stack); + + /* Disable interrupts first */ + raw_local_irq_disable(); + local_fiq_disable(); + + /* Disable the L2 if we're the last man standing. */ + if (disable_l2) + outer_disable(); + + /* Change to the new stack and continue with the reset. */ + call_with_stack(__soft_restart, (void *)addr, (void *)stack); + + /* Should never get here. */ + BUG(); +} + +void soft_restart(unsigned long addr) +{ + _soft_restart(addr, num_online_cpus() == 1); +} + +/* + * Called by kexec, immediately prior to machine_kexec(). + * + * This must completely disable all secondary CPUs; simply causing those CPUs + * to execute e.g. a RAM-based pin loop is not sufficient. This allows the + * kexec'd kernel to use any and all RAM as it sees fit, without having to + * avoid any code or data used by any SW CPU pin loop. The CPU hotplug + * functionality embodied in disable_nonboot_cpus() to achieve this. + */ +void machine_shutdown(void) +{ + disable_nonboot_cpus(); +} + +/* + * Halting simply requires that the secondary CPUs stop performing any + * activity (executing tasks, handling interrupts). smp_send_stop() + * achieves this. + */ +void machine_halt(void) +{ + local_irq_disable(); + smp_send_stop(); + + local_irq_disable(); + while (1); +} + +/* + * Power-off simply requires that the secondary CPUs stop performing any + * activity (executing tasks, handling interrupts). smp_send_stop() + * achieves this. When the system power is turned off, it will take all CPUs + * with it. + */ +void machine_power_off(void) +{ + local_irq_disable(); + smp_send_stop(); + + if (pm_power_off) + pm_power_off(); +} + +/* + * Restart requires that the secondary CPUs stop performing any activity + * while the primary CPU resets the system. Systems with a single CPU can + * use soft_restart() as their machine descriptor's .restart hook, since that + * will cause the only available CPU to reset. Systems with multiple CPUs must + * provide a HW restart implementation, to ensure that all CPUs reset at once. + * This is required so that any code running after reset on the primary CPU + * doesn't have to co-ordinate with other CPUs to ensure they aren't still + * executing pre-reset code, and using RAM that the primary CPU's code wishes + * to use. Implementing such co-ordination would be essentially impossible. + */ +void machine_restart(char *cmd) +{ + local_irq_disable(); + smp_send_stop(); + + if (arm_pm_restart) + arm_pm_restart(reboot_mode, cmd); + else + do_kernel_restart(cmd); + + /* Give a grace period for failure to restart of 1s */ + mdelay(1000); + + /* Whoops - the platform was unable to reboot. Tell the user! */ + printk("Reboot failed -- System halted\n"); + local_irq_disable(); + while (1); +} diff --git a/arch/arm/kernel/reboot.h b/arch/arm/kernel/reboot.h new file mode 100644 index 000000000000..bf7a0b1f076e --- /dev/null +++ b/arch/arm/kernel/reboot.h @@ -0,0 +1,7 @@ +#ifndef REBOOT_H +#define REBOOT_H + +extern void call_with_stack(void (*fn)(void *), void *arg, void *sp); +extern void _soft_restart(unsigned long addr, bool disable_l2); + +#endif diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c index 24b4a04846eb..36ed35073289 100644 --- a/arch/arm/kernel/return_address.c +++ b/arch/arm/kernel/return_address.c @@ -56,8 +56,6 @@ void *return_address(unsigned int level) return NULL; } -#else /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */ - -#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */ +#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */ EXPORT_SYMBOL_GPL(return_address); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index e55408e96559..6c777e908a24 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -246,12 +246,9 @@ static int __get_cpu_architecture(void) if (cpu_arch) cpu_arch += CPU_ARCH_ARMv3; } else if ((read_cpuid_id() & 0x000f0000) == 0x000f0000) { - unsigned int mmfr0; - /* Revised CPUID format. Read the Memory Model Feature * Register 0 and check for VMSAv7 or PMSAv7 */ - asm("mrc p15, 0, %0, c0, c1, 4" - : "=r" (mmfr0)); + unsigned int mmfr0 = read_cpuid_ext(CPUID_EXT_MMFR0); if ((mmfr0 & 0x0000000f) >= 0x00000003 || (mmfr0 & 0x000000f0) >= 0x00000030) cpu_arch = CPU_ARCH_ARMv7; @@ -375,30 +372,48 @@ void __init early_print(const char *str, ...) static void __init cpuid_init_hwcaps(void) { - unsigned int divide_instrs, vmsa; + int block; + u32 isar5; if (cpu_architecture() < CPU_ARCH_ARMv7) return; - divide_instrs = (read_cpuid_ext(CPUID_EXT_ISAR0) & 0x0f000000) >> 24; - - switch (divide_instrs) { - case 2: + block = cpuid_feature_extract(CPUID_EXT_ISAR0, 24); + if (block >= 2) elf_hwcap |= HWCAP_IDIVA; - case 1: + if (block >= 1) elf_hwcap |= HWCAP_IDIVT; - } /* LPAE implies atomic ldrd/strd instructions */ - vmsa = (read_cpuid_ext(CPUID_EXT_MMFR0) & 0xf) >> 0; - if (vmsa >= 5) + block = cpuid_feature_extract(CPUID_EXT_MMFR0, 0); + if (block >= 5) elf_hwcap |= HWCAP_LPAE; + + /* check for supported v8 Crypto instructions */ + isar5 = read_cpuid_ext(CPUID_EXT_ISAR5); + + block = cpuid_feature_extract_field(isar5, 4); + if (block >= 2) + elf_hwcap2 |= HWCAP2_PMULL; + if (block >= 1) + elf_hwcap2 |= HWCAP2_AES; + + block = cpuid_feature_extract_field(isar5, 8); + if (block >= 1) + elf_hwcap2 |= HWCAP2_SHA1; + + block = cpuid_feature_extract_field(isar5, 12); + if (block >= 1) + elf_hwcap2 |= HWCAP2_SHA2; + + block = cpuid_feature_extract_field(isar5, 16); + if (block >= 1) + elf_hwcap2 |= HWCAP2_CRC32; } static void __init elf_hwcap_fixup(void) { unsigned id = read_cpuid_id(); - unsigned sync_prim; /* * HWCAP_TLS is available only on 1136 r1p0 and later, @@ -419,9 +434,9 @@ static void __init elf_hwcap_fixup(void) * avoid advertising SWP; it may not be atomic with * multiprocessing cores. */ - sync_prim = ((read_cpuid_ext(CPUID_EXT_ISAR3) >> 8) & 0xf0) | - ((read_cpuid_ext(CPUID_EXT_ISAR4) >> 20) & 0x0f); - if (sync_prim >= 0x13) + if (cpuid_feature_extract(CPUID_EXT_ISAR3, 12) > 1 || + (cpuid_feature_extract(CPUID_EXT_ISAR3, 12) == 1 && + cpuid_feature_extract(CPUID_EXT_ISAR3, 20) >= 3)) elf_hwcap &= ~HWCAP_SWP; } diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 023ac905e4c3..423663e23791 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -318,17 +318,6 @@ get_sigframe(struct ksignal *ksig, struct pt_regs *regs, int framesize) return frame; } -/* - * translate the signal - */ -static inline int map_sig(int sig) -{ - struct thread_info *thread = current_thread_info(); - if (sig < 32 && thread->exec_domain && thread->exec_domain->signal_invmap) - sig = thread->exec_domain->signal_invmap[sig]; - return sig; -} - static int setup_return(struct pt_regs *regs, struct ksignal *ksig, unsigned long __user *rc, void __user *frame) @@ -412,7 +401,7 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig, } } - regs->ARM_r0 = map_sig(ksig->sig); + regs->ARM_r0 = ksig->sig; regs->ARM_sp = (unsigned long)frame; regs->ARM_lr = retcode; regs->ARM_pc = handler; diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index e1e60e5a7a27..7d37bfc50830 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -116,14 +116,7 @@ cpu_resume_after_mmu: ldmfd sp!, {r4 - r11, pc} ENDPROC(cpu_resume_after_mmu) -/* - * Note: Yes, part of the following code is located into the .data section. - * This is to allow sleep_save_sp to be accessed with a relative load - * while we can't rely on any MMU translation. We could have put - * sleep_save_sp in the .text section as well, but some setups might - * insist on it to be truly read-only. - */ - .data + .text .align ENTRY(cpu_resume) ARM_BE8(setend be) @ ensure we are in BE mode @@ -145,6 +138,8 @@ ARM_BE8(setend be) @ ensure we are in BE mode compute_mpidr_hash r1, r4, r5, r6, r0, r3 1: adr r0, _sleep_save_sp + ldr r2, [r0] + add r0, r0, r2 ldr r0, [r0, #SLEEP_SAVE_SP_PHYS] ldr r0, [r0, r1, lsl #2] @@ -156,10 +151,12 @@ THUMB( bx r3 ) ENDPROC(cpu_resume) .align 2 +_sleep_save_sp: + .long sleep_save_sp - . mpidr_hash_ptr: .long mpidr_hash - . @ mpidr_hash struct offset + .data .type sleep_save_sp, #object ENTRY(sleep_save_sp) -_sleep_save_sp: .space SLEEP_SAVE_SP_SZ @ struct sleep_save_sp diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 86ef244c5a24..cca5b8758185 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -145,6 +145,11 @@ void __init smp_init_cpus(void) smp_ops.smp_init_cpus(); } +int platform_can_secondary_boot(void) +{ + return !!smp_ops.smp_boot_secondary; +} + int platform_can_cpu_hotplug(void) { #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index afdd51e30bec..1361756782c7 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -42,7 +42,7 @@ " cmp %0, #0\n" \ " movne %0, %4\n" \ "2:\n" \ - " .section .fixup,\"ax\"\n" \ + " .section .text.fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %5\n" \ " b 2b\n" \ diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 0cc7e58c47cc..a66e37e211a9 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -76,7 +76,7 @@ void timer_tick(void) } #endif -static void dummy_clock_access(struct timespec *ts) +static void dummy_clock_access(struct timespec64 *ts) { ts->tv_sec = 0; ts->tv_nsec = 0; @@ -85,12 +85,12 @@ static void dummy_clock_access(struct timespec *ts) static clock_access_fn __read_persistent_clock = dummy_clock_access; static clock_access_fn __read_boot_clock = dummy_clock_access;; -void read_persistent_clock(struct timespec *ts) +void read_persistent_clock64(struct timespec64 *ts) { __read_persistent_clock(ts); } -void read_boot_clock(struct timespec *ts) +void read_boot_clock64(struct timespec64 *ts) { __read_boot_clock(ts); } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 788e23fe64d8..3dce1a342030 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -505,12 +505,10 @@ asmlinkage void bad_mode(struct pt_regs *regs, int reason) static int bad_syscall(int n, struct pt_regs *regs) { - struct thread_info *thread = current_thread_info(); siginfo_t info; - if ((current->personality & PER_MASK) != PER_LINUX && - thread->exec_domain->handler) { - thread->exec_domain->handler(n, regs); + if ((current->personality & PER_MASK) != PER_LINUX) { + send_sig(SIGSEGV, current, 1); return regs->ARM_r0; } diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c new file mode 100644 index 000000000000..efe17dd9b921 --- /dev/null +++ b/arch/arm/kernel/vdso.c @@ -0,0 +1,337 @@ +/* + * Adapted from arm64 version. + * + * Copyright (C) 2012 ARM Limited + * Copyright (C) 2015 Mentor Graphics Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/elf.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/of.h> +#include <linux/printk.h> +#include <linux/slab.h> +#include <linux/timekeeper_internal.h> +#include <linux/vmalloc.h> +#include <asm/arch_timer.h> +#include <asm/barrier.h> +#include <asm/cacheflush.h> +#include <asm/page.h> +#include <asm/vdso.h> +#include <asm/vdso_datapage.h> +#include <clocksource/arm_arch_timer.h> + +#define MAX_SYMNAME 64 + +static struct page **vdso_text_pagelist; + +/* Total number of pages needed for the data and text portions of the VDSO. */ +unsigned int vdso_total_pages __read_mostly; + +/* + * The VDSO data page. + */ +static union vdso_data_store vdso_data_store __page_aligned_data; +static struct vdso_data *vdso_data = &vdso_data_store.data; + +static struct page *vdso_data_page; +static struct vm_special_mapping vdso_data_mapping = { + .name = "[vvar]", + .pages = &vdso_data_page, +}; + +static struct vm_special_mapping vdso_text_mapping = { + .name = "[vdso]", +}; + +struct elfinfo { + Elf32_Ehdr *hdr; /* ptr to ELF */ + Elf32_Sym *dynsym; /* ptr to .dynsym section */ + unsigned long dynsymsize; /* size of .dynsym section */ + char *dynstr; /* ptr to .dynstr section */ +}; + +/* Cached result of boot-time check for whether the arch timer exists, + * and if so, whether the virtual counter is useable. + */ +static bool cntvct_ok __read_mostly; + +static bool __init cntvct_functional(void) +{ + struct device_node *np; + bool ret = false; + + if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) + goto out; + + /* The arm_arch_timer core should export + * arch_timer_use_virtual or similar so we don't have to do + * this. + */ + np = of_find_compatible_node(NULL, NULL, "arm,armv7-timer"); + if (!np) + goto out_put; + + if (of_property_read_bool(np, "arm,cpu-registers-not-fw-configured")) + goto out_put; + + ret = true; + +out_put: + of_node_put(np); +out: + return ret; +} + +static void * __init find_section(Elf32_Ehdr *ehdr, const char *name, + unsigned long *size) +{ + Elf32_Shdr *sechdrs; + unsigned int i; + char *secnames; + + /* Grab section headers and strings so we can tell who is who */ + sechdrs = (void *)ehdr + ehdr->e_shoff; + secnames = (void *)ehdr + sechdrs[ehdr->e_shstrndx].sh_offset; + + /* Find the section they want */ + for (i = 1; i < ehdr->e_shnum; i++) { + if (strcmp(secnames + sechdrs[i].sh_name, name) == 0) { + if (size) + *size = sechdrs[i].sh_size; + return (void *)ehdr + sechdrs[i].sh_offset; + } + } + + if (size) + *size = 0; + return NULL; +} + +static Elf32_Sym * __init find_symbol(struct elfinfo *lib, const char *symname) +{ + unsigned int i; + + for (i = 0; i < (lib->dynsymsize / sizeof(Elf32_Sym)); i++) { + char name[MAX_SYMNAME], *c; + + if (lib->dynsym[i].st_name == 0) + continue; + strlcpy(name, lib->dynstr + lib->dynsym[i].st_name, + MAX_SYMNAME); + c = strchr(name, '@'); + if (c) + *c = 0; + if (strcmp(symname, name) == 0) + return &lib->dynsym[i]; + } + return NULL; +} + +static void __init vdso_nullpatch_one(struct elfinfo *lib, const char *symname) +{ + Elf32_Sym *sym; + + sym = find_symbol(lib, symname); + if (!sym) + return; + + sym->st_name = 0; +} + +static void __init patch_vdso(void *ehdr) +{ + struct elfinfo einfo; + + einfo = (struct elfinfo) { + .hdr = ehdr, + }; + + einfo.dynsym = find_section(einfo.hdr, ".dynsym", &einfo.dynsymsize); + einfo.dynstr = find_section(einfo.hdr, ".dynstr", NULL); + + /* If the virtual counter is absent or non-functional we don't + * want programs to incur the slight additional overhead of + * dispatching through the VDSO only to fall back to syscalls. + */ + if (!cntvct_ok) { + vdso_nullpatch_one(&einfo, "__vdso_gettimeofday"); + vdso_nullpatch_one(&einfo, "__vdso_clock_gettime"); + } +} + +static int __init vdso_init(void) +{ + unsigned int text_pages; + int i; + + if (memcmp(&vdso_start, "\177ELF", 4)) { + pr_err("VDSO is not a valid ELF object!\n"); + return -ENOEXEC; + } + + text_pages = (&vdso_end - &vdso_start) >> PAGE_SHIFT; + pr_debug("vdso: %i text pages at base %p\n", text_pages, &vdso_start); + + /* Allocate the VDSO text pagelist */ + vdso_text_pagelist = kcalloc(text_pages, sizeof(struct page *), + GFP_KERNEL); + if (vdso_text_pagelist == NULL) + return -ENOMEM; + + /* Grab the VDSO data page. */ + vdso_data_page = virt_to_page(vdso_data); + + /* Grab the VDSO text pages. */ + for (i = 0; i < text_pages; i++) { + struct page *page; + + page = virt_to_page(&vdso_start + i * PAGE_SIZE); + vdso_text_pagelist[i] = page; + } + + vdso_text_mapping.pages = vdso_text_pagelist; + + vdso_total_pages = 1; /* for the data/vvar page */ + vdso_total_pages += text_pages; + + cntvct_ok = cntvct_functional(); + + patch_vdso(&vdso_start); + + return 0; +} +arch_initcall(vdso_init); + +static int install_vvar(struct mm_struct *mm, unsigned long addr) +{ + struct vm_area_struct *vma; + + vma = _install_special_mapping(mm, addr, PAGE_SIZE, + VM_READ | VM_MAYREAD, + &vdso_data_mapping); + + return IS_ERR(vma) ? PTR_ERR(vma) : 0; +} + +/* assumes mmap_sem is write-locked */ +void arm_install_vdso(struct mm_struct *mm, unsigned long addr) +{ + struct vm_area_struct *vma; + unsigned long len; + + mm->context.vdso = 0; + + if (vdso_text_pagelist == NULL) + return; + + if (install_vvar(mm, addr)) + return; + + /* Account for vvar page. */ + addr += PAGE_SIZE; + len = (vdso_total_pages - 1) << PAGE_SHIFT; + + vma = _install_special_mapping(mm, addr, len, + VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC, + &vdso_text_mapping); + + if (!IS_ERR(vma)) + mm->context.vdso = addr; +} + +static void vdso_write_begin(struct vdso_data *vdata) +{ + ++vdso_data->seq_count; + smp_wmb(); /* Pairs with smp_rmb in vdso_read_retry */ +} + +static void vdso_write_end(struct vdso_data *vdata) +{ + smp_wmb(); /* Pairs with smp_rmb in vdso_read_begin */ + ++vdso_data->seq_count; +} + +static bool tk_is_cntvct(const struct timekeeper *tk) +{ + if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) + return false; + + if (strcmp(tk->tkr_mono.clock->name, "arch_sys_counter") != 0) + return false; + + return true; +} + +/** + * update_vsyscall - update the vdso data page + * + * Increment the sequence counter, making it odd, indicating to + * userspace that an update is in progress. Update the fields used + * for coarse clocks and, if the architected system timer is in use, + * the fields used for high precision clocks. Increment the sequence + * counter again, making it even, indicating to userspace that the + * update is finished. + * + * Userspace is expected to sample seq_count before reading any other + * fields from the data page. If seq_count is odd, userspace is + * expected to wait until it becomes even. After copying data from + * the page, userspace must sample seq_count again; if it has changed + * from its previous value, userspace must retry the whole sequence. + * + * Calls to update_vsyscall are serialized by the timekeeping core. + */ +void update_vsyscall(struct timekeeper *tk) +{ + struct timespec xtime_coarse; + struct timespec64 *wtm = &tk->wall_to_monotonic; + + if (!cntvct_ok) { + /* The entry points have been zeroed, so there is no + * point in updating the data page. + */ + return; + } + + vdso_write_begin(vdso_data); + + xtime_coarse = __current_kernel_time(); + vdso_data->tk_is_cntvct = tk_is_cntvct(tk); + vdso_data->xtime_coarse_sec = xtime_coarse.tv_sec; + vdso_data->xtime_coarse_nsec = xtime_coarse.tv_nsec; + vdso_data->wtm_clock_sec = wtm->tv_sec; + vdso_data->wtm_clock_nsec = wtm->tv_nsec; + + if (vdso_data->tk_is_cntvct) { + vdso_data->cs_cycle_last = tk->tkr_mono.cycle_last; + vdso_data->xtime_clock_sec = tk->xtime_sec; + vdso_data->xtime_clock_snsec = tk->tkr_mono.xtime_nsec; + vdso_data->cs_mult = tk->tkr_mono.mult; + vdso_data->cs_shift = tk->tkr_mono.shift; + vdso_data->cs_mask = tk->tkr_mono.mask; + } + + vdso_write_end(vdso_data); + + flush_dcache_page(virt_to_page(vdso_data)); +} + +void update_vsyscall_tz(void) +{ + vdso_data->tz_minuteswest = sys_tz.tz_minuteswest; + vdso_data->tz_dsttime = sys_tz.tz_dsttime; + flush_dcache_page(virt_to_page(vdso_data)); +} diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index b31aa73e8076..8b60fde5ce48 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -11,7 +11,7 @@ #ifdef CONFIG_ARM_KERNMEM_PERMS #include <asm/pgtable.h> #endif - + #define PROC_INFO \ . = ALIGN(4); \ VMLINUX_SYMBOL(__proc_info_begin) = .; \ @@ -23,7 +23,7 @@ VMLINUX_SYMBOL(__idmap_text_start) = .; \ *(.idmap.text) \ VMLINUX_SYMBOL(__idmap_text_end) = .; \ - . = ALIGN(32); \ + . = ALIGN(PAGE_SIZE); \ VMLINUX_SYMBOL(__hyp_idmap_text_start) = .; \ *(.hyp.idmap.text) \ VMLINUX_SYMBOL(__hyp_idmap_text_end) = .; @@ -74,7 +74,7 @@ SECTIONS ARM_EXIT_DISCARD(EXIT_DATA) EXIT_CALL #ifndef CONFIG_MMU - *(.fixup) + *(.text.fixup) *(__ex_table) #endif #ifndef CONFIG_SMP_ON_UP @@ -100,6 +100,7 @@ SECTIONS .text : { /* Real text segment */ _stext = .; /* Text and read-only data */ + IDMAP_TEXT __exception_text_start = .; *(.exception.text) __exception_text_end = .; @@ -108,10 +109,6 @@ SECTIONS SCHED_TEXT LOCK_TEXT KPROBES_TEXT - IDMAP_TEXT -#ifdef CONFIG_MMU - *(.fixup) -#endif *(.gnu.warning) *(.glue_7) *(.glue_7t) @@ -346,8 +343,11 @@ SECTIONS */ ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support") ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") + /* - * The HYP init code can't be more than a page long. + * The HYP init code can't be more than a page long, + * and should not cross a page boundary. * The above comment applies as well. */ -ASSERT(((__hyp_idmap_text_end - __hyp_idmap_text_start) <= PAGE_SIZE), "HYP init code too big") +ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE, + "HYP init code too big or misaligned") diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig index 338ace78ed18..f1f79d104309 100644 --- a/arch/arm/kvm/Kconfig +++ b/arch/arm/kvm/Kconfig @@ -18,6 +18,7 @@ if VIRTUALIZATION config KVM bool "Kernel-based Virtual Machine (KVM) support" + depends on MMU && OF select PREEMPT_NOTIFIERS select ANON_INODES select HAVE_KVM_CPU_RELAX_INTERCEPT @@ -26,10 +27,12 @@ config KVM select KVM_ARM_HOST select KVM_GENERIC_DIRTYLOG_READ_PROTECT select SRCU - depends on ARM_VIRT_EXT && ARM_LPAE + select MMU_NOTIFIER + select HAVE_KVM_EVENTFD + select HAVE_KVM_IRQFD + depends on ARM_VIRT_EXT && ARM_LPAE && ARM_ARCH_TIMER ---help--- - Support hosting virtualized guest machines. You will also - need to select one or more of the processor modules below. + Support hosting virtualized guest machines. This module provides access to the hardware capabilities through a character device node named /dev/kvm. @@ -37,10 +40,7 @@ config KVM If unsure, say N. config KVM_ARM_HOST - bool "KVM host support for ARM cpus." - depends on KVM - depends on MMU - select MMU_NOTIFIER + bool ---help--- Provides host support for ARM processors. @@ -55,20 +55,4 @@ config KVM_ARM_MAX_VCPUS large, so only choose a reasonable number that you expect to actually use. -config KVM_ARM_VGIC - bool "KVM support for Virtual GIC" - depends on KVM_ARM_HOST && OF - select HAVE_KVM_IRQCHIP - default y - ---help--- - Adds support for a hardware assisted, in-kernel GIC emulation. - -config KVM_ARM_TIMER - bool "KVM support for Architected Timers" - depends on KVM_ARM_VGIC && ARM_ARCH_TIMER - select HAVE_KVM_IRQCHIP - default y - ---help--- - Adds support for the Architected Timers in virtual machines - endif # VIRTUALIZATION diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index 443b8bea43e9..139e46c08b6e 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -7,7 +7,7 @@ ifeq ($(plus_virt),+virt) plus_virt_def := -DREQUIRES_VIRT=1 endif -ccflags-y += -Ivirt/kvm -Iarch/arm/kvm +ccflags-y += -Iarch/arm/kvm CFLAGS_arm.o := -I. $(plus_virt_def) CFLAGS_mmu.o := -I. @@ -15,12 +15,12 @@ AFLAGS_init.o := -Wa,-march=armv7-a$(plus_virt) AFLAGS_interrupts.o := -Wa,-march=armv7-a$(plus_virt) KVM := ../../../virt/kvm -kvm-arm-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o +kvm-arm-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o obj-y += kvm-arm.o init.o interrupts.o obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o obj-y += coproc.o coproc_a15.o coproc_a7.o mmio.o psci.o perf.o -obj-$(CONFIG_KVM_ARM_VGIC) += $(KVM)/arm/vgic.o -obj-$(CONFIG_KVM_ARM_VGIC) += $(KVM)/arm/vgic-v2.o -obj-$(CONFIG_KVM_ARM_VGIC) += $(KVM)/arm/vgic-v2-emul.o -obj-$(CONFIG_KVM_ARM_TIMER) += $(KVM)/arm/arch_timer.o +obj-y += $(KVM)/arm/vgic.o +obj-y += $(KVM)/arm/vgic-v2.o +obj-y += $(KVM)/arm/vgic-v2-emul.o +obj-y += $(KVM)/arm/arch_timer.o diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 07e7eb1d7ab6..d9631ecddd56 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -61,8 +61,6 @@ static atomic64_t kvm_vmid_gen = ATOMIC64_INIT(1); static u8 kvm_next_vmid; static DEFINE_SPINLOCK(kvm_vmid_lock); -static bool vgic_present; - static void kvm_arm_set_running_vcpu(struct kvm_vcpu *vcpu) { BUG_ON(preemptible()); @@ -173,8 +171,8 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) int r; switch (ext) { case KVM_CAP_IRQCHIP: - r = vgic_present; - break; + case KVM_CAP_IRQFD: + case KVM_CAP_IOEVENTFD: case KVM_CAP_DEVICE_CTRL: case KVM_CAP_USER_MEMORY: case KVM_CAP_SYNC_MMU: @@ -183,6 +181,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) case KVM_CAP_ARM_PSCI: case KVM_CAP_ARM_PSCI_0_2: case KVM_CAP_READONLY_MEM: + case KVM_CAP_MP_STATE: r = 1; break; case KVM_CAP_COALESCED_MMIO: @@ -268,7 +267,7 @@ void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu) int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu) { - return 0; + return kvm_timer_should_fire(vcpu); } int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) @@ -313,13 +312,29 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu, int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu, struct kvm_mp_state *mp_state) { - return -EINVAL; + if (vcpu->arch.pause) + mp_state->mp_state = KVM_MP_STATE_STOPPED; + else + mp_state->mp_state = KVM_MP_STATE_RUNNABLE; + + return 0; } int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, struct kvm_mp_state *mp_state) { - return -EINVAL; + switch (mp_state->mp_state) { + case KVM_MP_STATE_RUNNABLE: + vcpu->arch.pause = false; + break; + case KVM_MP_STATE_STOPPED: + vcpu->arch.pause = true; + break; + default: + return -EINVAL; + } + + return 0; } /** @@ -452,6 +467,11 @@ static int kvm_vcpu_first_run_init(struct kvm_vcpu *vcpu) return 0; } +bool kvm_arch_intc_initialized(struct kvm *kvm) +{ + return vgic_initialized(kvm); +} + static void vcpu_pause(struct kvm_vcpu *vcpu) { wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); @@ -540,7 +560,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) vcpu->mode = OUTSIDE_GUEST_MODE; kvm_guest_exit(); - trace_kvm_exit(*vcpu_pc(vcpu)); + trace_kvm_exit(kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu)); /* * We may have taken a host interrupt in HYP mode (ie * while executing the guest). This interrupt is still @@ -651,8 +671,7 @@ int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level, if (!irqchip_in_kernel(kvm)) return -ENXIO; - if (irq_num < VGIC_NR_PRIVATE_IRQS || - irq_num > KVM_ARM_IRQ_GIC_MAX) + if (irq_num < VGIC_NR_PRIVATE_IRQS) return -EINVAL; return kvm_vgic_inject_irq(kvm, 0, irq_num, level); @@ -831,8 +850,6 @@ static int kvm_vm_ioctl_set_device_addr(struct kvm *kvm, switch (dev_id) { case KVM_ARM_DEVICE_VGIC_V2: - if (!vgic_present) - return -ENXIO; return kvm_vgic_addr(kvm, type, &dev_addr->addr, true); default: return -ENODEV; @@ -847,10 +864,7 @@ long kvm_arch_vm_ioctl(struct file *filp, switch (ioctl) { case KVM_CREATE_IRQCHIP: { - if (vgic_present) - return kvm_vgic_create(kvm, KVM_DEV_TYPE_ARM_VGIC_V2); - else - return -ENXIO; + return kvm_vgic_create(kvm, KVM_DEV_TYPE_ARM_VGIC_V2); } case KVM_ARM_SET_DEVICE_ADDR: { struct kvm_arm_device_addr dev_addr; @@ -1035,10 +1049,6 @@ static int init_hyp_mode(void) if (err) goto out_free_context; -#ifdef CONFIG_KVM_ARM_VGIC - vgic_present = true; -#endif - /* * Init HYP architected timer support */ diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c index 384bab67c462..d503fbb787d3 100644 --- a/arch/arm/kvm/guest.c +++ b/arch/arm/kvm/guest.c @@ -109,22 +109,6 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) return -EINVAL; } -#ifndef CONFIG_KVM_ARM_TIMER - -#define NUM_TIMER_REGS 0 - -static int copy_timer_indices(struct kvm_vcpu *vcpu, u64 __user *uindices) -{ - return 0; -} - -static bool is_timer_reg(u64 index) -{ - return false; -} - -#else - #define NUM_TIMER_REGS 3 static bool is_timer_reg(u64 index) @@ -152,8 +136,6 @@ static int copy_timer_indices(struct kvm_vcpu *vcpu, u64 __user *uindices) return 0; } -#endif - static int set_timer_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { void __user *uaddr = (void __user *)(long)reg->addr; diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S index 14d488388480..35e4a3a0c476 100644 --- a/arch/arm/kvm/interrupts_head.S +++ b/arch/arm/kvm/interrupts_head.S @@ -402,7 +402,6 @@ vcpu .req r0 @ vcpu pointer always in r0 * Assumes vcpu pointer in vcpu reg */ .macro save_vgic_state -#ifdef CONFIG_KVM_ARM_VGIC /* Get VGIC VCTRL base into r2 */ ldr r2, [vcpu, #VCPU_KVM] ldr r2, [r2, #KVM_VGIC_VCTRL] @@ -460,7 +459,6 @@ ARM_BE8(rev r6, r6 ) subs r4, r4, #1 bne 1b 2: -#endif .endm /* @@ -469,7 +467,6 @@ ARM_BE8(rev r6, r6 ) * Assumes vcpu pointer in vcpu reg */ .macro restore_vgic_state -#ifdef CONFIG_KVM_ARM_VGIC /* Get VGIC VCTRL base into r2 */ ldr r2, [vcpu, #VCPU_KVM] ldr r2, [r2, #KVM_VGIC_VCTRL] @@ -501,7 +498,6 @@ ARM_BE8(rev r6, r6 ) subs r4, r4, #1 bne 1b 2: -#endif .endm #define CNTHCTL_PL1PCTEN (1 << 0) @@ -515,7 +511,6 @@ ARM_BE8(rev r6, r6 ) * Clobbers r2-r5 */ .macro save_timer_state -#ifdef CONFIG_KVM_ARM_TIMER ldr r4, [vcpu, #VCPU_KVM] ldr r2, [r4, #KVM_TIMER_ENABLED] cmp r2, #0 @@ -537,7 +532,6 @@ ARM_BE8(rev r6, r6 ) mcrr p15, 4, r2, r2, c14 @ CNTVOFF 1: -#endif @ Allow physical timer/counter access for the host mrc p15, 4, r2, c14, c1, 0 @ CNTHCTL orr r2, r2, #(CNTHCTL_PL1PCEN | CNTHCTL_PL1PCTEN) @@ -559,7 +553,6 @@ ARM_BE8(rev r6, r6 ) bic r2, r2, #CNTHCTL_PL1PCEN mcr p15, 4, r2, c14, c1, 0 @ CNTHCTL -#ifdef CONFIG_KVM_ARM_TIMER ldr r4, [vcpu, #VCPU_KVM] ldr r2, [r4, #KVM_TIMER_ENABLED] cmp r2, #0 @@ -579,7 +572,6 @@ ARM_BE8(rev r6, r6 ) and r2, r2, #3 mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL 1: -#endif .endm .equ vmentry, 0 diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c index 5d3bfc0eb3f0..974b1c606d04 100644 --- a/arch/arm/kvm/mmio.c +++ b/arch/arm/kvm/mmio.c @@ -121,12 +121,11 @@ int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run) return 0; } -static int decode_hsr(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, - struct kvm_exit_mmio *mmio) +static int decode_hsr(struct kvm_vcpu *vcpu, bool *is_write, int *len) { unsigned long rt; - int len; - bool is_write, sign_extend; + int access_size; + bool sign_extend; if (kvm_vcpu_dabt_isextabt(vcpu)) { /* cache operation on I/O addr, tell guest unsupported */ @@ -140,17 +139,15 @@ static int decode_hsr(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, return 1; } - len = kvm_vcpu_dabt_get_as(vcpu); - if (unlikely(len < 0)) - return len; + access_size = kvm_vcpu_dabt_get_as(vcpu); + if (unlikely(access_size < 0)) + return access_size; - is_write = kvm_vcpu_dabt_iswrite(vcpu); + *is_write = kvm_vcpu_dabt_iswrite(vcpu); sign_extend = kvm_vcpu_dabt_issext(vcpu); rt = kvm_vcpu_dabt_get_rd(vcpu); - mmio->is_write = is_write; - mmio->phys_addr = fault_ipa; - mmio->len = len; + *len = access_size; vcpu->arch.mmio_decode.sign_extend = sign_extend; vcpu->arch.mmio_decode.rt = rt; @@ -165,20 +162,20 @@ static int decode_hsr(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run, phys_addr_t fault_ipa) { - struct kvm_exit_mmio mmio; unsigned long data; unsigned long rt; int ret; + bool is_write; + int len; + u8 data_buf[8]; /* - * Prepare MMIO operation. First stash it in a private - * structure that we can use for in-kernel emulation. If the - * kernel can't handle it, copy it into run->mmio and let user - * space do its magic. + * Prepare MMIO operation. First decode the syndrome data we get + * from the CPU. Then try if some in-kernel emulation feels + * responsible, otherwise let user space do its magic. */ - if (kvm_vcpu_dabt_isvalid(vcpu)) { - ret = decode_hsr(vcpu, fault_ipa, &mmio); + ret = decode_hsr(vcpu, &is_write, &len); if (ret) return ret; } else { @@ -188,21 +185,34 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run, rt = vcpu->arch.mmio_decode.rt; - if (mmio.is_write) { - data = vcpu_data_guest_to_host(vcpu, *vcpu_reg(vcpu, rt), - mmio.len); + if (is_write) { + data = vcpu_data_guest_to_host(vcpu, *vcpu_reg(vcpu, rt), len); + + trace_kvm_mmio(KVM_TRACE_MMIO_WRITE, len, fault_ipa, data); + mmio_write_buf(data_buf, len, data); - trace_kvm_mmio(KVM_TRACE_MMIO_WRITE, mmio.len, - fault_ipa, data); - mmio_write_buf(mmio.data, mmio.len, data); + ret = kvm_io_bus_write(vcpu, KVM_MMIO_BUS, fault_ipa, len, + data_buf); } else { - trace_kvm_mmio(KVM_TRACE_MMIO_READ_UNSATISFIED, mmio.len, + trace_kvm_mmio(KVM_TRACE_MMIO_READ_UNSATISFIED, len, fault_ipa, 0); + + ret = kvm_io_bus_read(vcpu, KVM_MMIO_BUS, fault_ipa, len, + data_buf); } - if (vgic_handle_mmio(vcpu, run, &mmio)) + /* Now prepare kvm_run for the potential return to userland. */ + run->mmio.is_write = is_write; + run->mmio.phys_addr = fault_ipa; + run->mmio.len = len; + memcpy(run->mmio.data, data_buf, len); + + if (!ret) { + /* We handled the access successfully in the kernel. */ + kvm_handle_mmio_return(vcpu, run); return 1; + } - kvm_prepare_mmio(run, &mmio); + run->exit_reason = KVM_EXIT_MMIO; return 0; } diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 3e6859bc3e11..1d5accbd3dcf 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -35,9 +35,9 @@ extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[]; static pgd_t *boot_hyp_pgd; static pgd_t *hyp_pgd; +static pgd_t *merged_hyp_pgd; static DEFINE_MUTEX(kvm_hyp_pgd_mutex); -static void *init_bounce_page; static unsigned long hyp_idmap_start; static unsigned long hyp_idmap_end; static phys_addr_t hyp_idmap_vector; @@ -290,7 +290,7 @@ static void unmap_range(struct kvm *kvm, pgd_t *pgdp, phys_addr_t addr = start, end = start + size; phys_addr_t next; - pgd = pgdp + pgd_index(addr); + pgd = pgdp + kvm_pgd_index(addr); do { next = kvm_pgd_addr_end(addr, end); if (!pgd_none(*pgd)) @@ -355,7 +355,7 @@ static void stage2_flush_memslot(struct kvm *kvm, phys_addr_t next; pgd_t *pgd; - pgd = kvm->arch.pgd + pgd_index(addr); + pgd = kvm->arch.pgd + kvm_pgd_index(addr); do { next = kvm_pgd_addr_end(addr, end); stage2_flush_puds(kvm, pgd, addr, next); @@ -405,9 +405,6 @@ void free_boot_hyp_pgd(void) if (hyp_pgd) unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); - free_page((unsigned long)init_bounce_page); - init_bounce_page = NULL; - mutex_unlock(&kvm_hyp_pgd_mutex); } @@ -438,6 +435,11 @@ void free_hyp_pgds(void) free_pages((unsigned long)hyp_pgd, hyp_pgd_order); hyp_pgd = NULL; } + if (merged_hyp_pgd) { + clear_page(merged_hyp_pgd); + free_page((unsigned long)merged_hyp_pgd); + merged_hyp_pgd = NULL; + } mutex_unlock(&kvm_hyp_pgd_mutex); } @@ -632,6 +634,20 @@ int create_hyp_io_mappings(void *from, void *to, phys_addr_t phys_addr) __phys_to_pfn(phys_addr), PAGE_HYP_DEVICE); } +/* Free the HW pgd, one page at a time */ +static void kvm_free_hwpgd(void *hwpgd) +{ + free_pages_exact(hwpgd, kvm_get_hwpgd_size()); +} + +/* Allocate the HW PGD, making sure that each page gets its own refcount */ +static void *kvm_alloc_hwpgd(void) +{ + unsigned int size = kvm_get_hwpgd_size(); + + return alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO); +} + /** * kvm_alloc_stage2_pgd - allocate level-1 table for stage-2 translation. * @kvm: The KVM struct pointer for the VM. @@ -645,15 +661,31 @@ int create_hyp_io_mappings(void *from, void *to, phys_addr_t phys_addr) */ int kvm_alloc_stage2_pgd(struct kvm *kvm) { - int ret; pgd_t *pgd; + void *hwpgd; if (kvm->arch.pgd != NULL) { kvm_err("kvm_arch already initialized?\n"); return -EINVAL; } + hwpgd = kvm_alloc_hwpgd(); + if (!hwpgd) + return -ENOMEM; + + /* When the kernel uses more levels of page tables than the + * guest, we allocate a fake PGD and pre-populate it to point + * to the next-level page table, which will be the real + * initial page table pointed to by the VTTBR. + * + * When KVM_PREALLOC_LEVEL==2, we allocate a single page for + * the PMD and the kernel will use folded pud. + * When KVM_PREALLOC_LEVEL==1, we allocate 2 consecutive PUD + * pages. + */ if (KVM_PREALLOC_LEVEL > 0) { + int i; + /* * Allocate fake pgd for the page table manipulation macros to * work. This is not used by the hardware and we have no @@ -661,30 +693,32 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm) */ pgd = (pgd_t *)kmalloc(PTRS_PER_S2_PGD * sizeof(pgd_t), GFP_KERNEL | __GFP_ZERO); + + if (!pgd) { + kvm_free_hwpgd(hwpgd); + return -ENOMEM; + } + + /* Plug the HW PGD into the fake one. */ + for (i = 0; i < PTRS_PER_S2_PGD; i++) { + if (KVM_PREALLOC_LEVEL == 1) + pgd_populate(NULL, pgd + i, + (pud_t *)hwpgd + i * PTRS_PER_PUD); + else if (KVM_PREALLOC_LEVEL == 2) + pud_populate(NULL, pud_offset(pgd, 0) + i, + (pmd_t *)hwpgd + i * PTRS_PER_PMD); + } } else { /* * Allocate actual first-level Stage-2 page table used by the * hardware for Stage-2 page table walks. */ - pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, S2_PGD_ORDER); + pgd = (pgd_t *)hwpgd; } - if (!pgd) - return -ENOMEM; - - ret = kvm_prealloc_hwpgd(kvm, pgd); - if (ret) - goto out_err; - kvm_clean_pgd(pgd); kvm->arch.pgd = pgd; return 0; -out_err: - if (KVM_PREALLOC_LEVEL > 0) - kfree(pgd); - else - free_pages((unsigned long)pgd, S2_PGD_ORDER); - return ret; } /** @@ -785,11 +819,10 @@ void kvm_free_stage2_pgd(struct kvm *kvm) return; unmap_stage2_range(kvm, 0, KVM_PHYS_SIZE); - kvm_free_hwpgd(kvm); + kvm_free_hwpgd(kvm_get_hwpgd(kvm)); if (KVM_PREALLOC_LEVEL > 0) kfree(kvm->arch.pgd); - else - free_pages((unsigned long)kvm->arch.pgd, S2_PGD_ORDER); + kvm->arch.pgd = NULL; } @@ -799,7 +832,7 @@ static pud_t *stage2_get_pud(struct kvm *kvm, struct kvm_mmu_memory_cache *cache pgd_t *pgd; pud_t *pud; - pgd = kvm->arch.pgd + pgd_index(addr); + pgd = kvm->arch.pgd + kvm_pgd_index(addr); if (WARN_ON(pgd_none(*pgd))) { if (!cache) return NULL; @@ -1089,7 +1122,7 @@ static void stage2_wp_range(struct kvm *kvm, phys_addr_t addr, phys_addr_t end) pgd_t *pgd; phys_addr_t next; - pgd = kvm->arch.pgd + pgd_index(addr); + pgd = kvm->arch.pgd + kvm_pgd_index(addr); do { /* * Release kvm_mmu_lock periodically if the memory region is @@ -1299,10 +1332,51 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, out_unlock: spin_unlock(&kvm->mmu_lock); + kvm_set_pfn_accessed(pfn); kvm_release_pfn_clean(pfn); return ret; } +/* + * Resolve the access fault by making the page young again. + * Note that because the faulting entry is guaranteed not to be + * cached in the TLB, we don't need to invalidate anything. + */ +static void handle_access_fault(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa) +{ + pmd_t *pmd; + pte_t *pte; + pfn_t pfn; + bool pfn_valid = false; + + trace_kvm_access_fault(fault_ipa); + + spin_lock(&vcpu->kvm->mmu_lock); + + pmd = stage2_get_pmd(vcpu->kvm, NULL, fault_ipa); + if (!pmd || pmd_none(*pmd)) /* Nothing there */ + goto out; + + if (kvm_pmd_huge(*pmd)) { /* THP, HugeTLB */ + *pmd = pmd_mkyoung(*pmd); + pfn = pmd_pfn(*pmd); + pfn_valid = true; + goto out; + } + + pte = pte_offset_kernel(pmd, fault_ipa); + if (pte_none(*pte)) /* Nothing there either */ + goto out; + + *pte = pte_mkyoung(*pte); /* Just a page... */ + pfn = pte_pfn(*pte); + pfn_valid = true; +out: + spin_unlock(&vcpu->kvm->mmu_lock); + if (pfn_valid) + kvm_set_pfn_accessed(pfn); +} + /** * kvm_handle_guest_abort - handles all 2nd stage aborts * @vcpu: the VCPU pointer @@ -1333,7 +1407,8 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run) /* Check the stage-2 fault is trans. fault or write fault */ fault_status = kvm_vcpu_trap_get_fault_type(vcpu); - if (fault_status != FSC_FAULT && fault_status != FSC_PERM) { + if (fault_status != FSC_FAULT && fault_status != FSC_PERM && + fault_status != FSC_ACCESS) { kvm_err("Unsupported FSC: EC=%#x xFSC=%#lx ESR_EL2=%#lx\n", kvm_vcpu_trap_get_class(vcpu), (unsigned long)kvm_vcpu_trap_get_fault(vcpu), @@ -1369,6 +1444,12 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run) /* Userspace should not be able to register out-of-bounds IPAs */ VM_BUG_ON(fault_ipa >= KVM_PHYS_SIZE); + if (fault_status == FSC_ACCESS) { + handle_access_fault(vcpu, fault_ipa); + ret = 1; + goto out_unlock; + } + ret = user_mem_abort(vcpu, fault_ipa, memslot, hva, fault_status); if (ret == 0) ret = 1; @@ -1377,15 +1458,16 @@ out_unlock: return ret; } -static void handle_hva_to_gpa(struct kvm *kvm, - unsigned long start, - unsigned long end, - void (*handler)(struct kvm *kvm, - gpa_t gpa, void *data), - void *data) +static int handle_hva_to_gpa(struct kvm *kvm, + unsigned long start, + unsigned long end, + int (*handler)(struct kvm *kvm, + gpa_t gpa, void *data), + void *data) { struct kvm_memslots *slots; struct kvm_memory_slot *memslot; + int ret = 0; slots = kvm_memslots(kvm); @@ -1409,14 +1491,17 @@ static void handle_hva_to_gpa(struct kvm *kvm, for (; gfn < gfn_end; ++gfn) { gpa_t gpa = gfn << PAGE_SHIFT; - handler(kvm, gpa, data); + ret |= handler(kvm, gpa, data); } } + + return ret; } -static void kvm_unmap_hva_handler(struct kvm *kvm, gpa_t gpa, void *data) +static int kvm_unmap_hva_handler(struct kvm *kvm, gpa_t gpa, void *data) { unmap_stage2_range(kvm, gpa, PAGE_SIZE); + return 0; } int kvm_unmap_hva(struct kvm *kvm, unsigned long hva) @@ -1442,7 +1527,7 @@ int kvm_unmap_hva_range(struct kvm *kvm, return 0; } -static void kvm_set_spte_handler(struct kvm *kvm, gpa_t gpa, void *data) +static int kvm_set_spte_handler(struct kvm *kvm, gpa_t gpa, void *data) { pte_t *pte = (pte_t *)data; @@ -1454,6 +1539,7 @@ static void kvm_set_spte_handler(struct kvm *kvm, gpa_t gpa, void *data) * through this calling path. */ stage2_set_pte(kvm, NULL, gpa, pte, 0); + return 0; } @@ -1470,6 +1556,67 @@ void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte) handle_hva_to_gpa(kvm, hva, end, &kvm_set_spte_handler, &stage2_pte); } +static int kvm_age_hva_handler(struct kvm *kvm, gpa_t gpa, void *data) +{ + pmd_t *pmd; + pte_t *pte; + + pmd = stage2_get_pmd(kvm, NULL, gpa); + if (!pmd || pmd_none(*pmd)) /* Nothing there */ + return 0; + + if (kvm_pmd_huge(*pmd)) { /* THP, HugeTLB */ + if (pmd_young(*pmd)) { + *pmd = pmd_mkold(*pmd); + return 1; + } + + return 0; + } + + pte = pte_offset_kernel(pmd, gpa); + if (pte_none(*pte)) + return 0; + + if (pte_young(*pte)) { + *pte = pte_mkold(*pte); /* Just a page... */ + return 1; + } + + return 0; +} + +static int kvm_test_age_hva_handler(struct kvm *kvm, gpa_t gpa, void *data) +{ + pmd_t *pmd; + pte_t *pte; + + pmd = stage2_get_pmd(kvm, NULL, gpa); + if (!pmd || pmd_none(*pmd)) /* Nothing there */ + return 0; + + if (kvm_pmd_huge(*pmd)) /* THP, HugeTLB */ + return pmd_young(*pmd); + + pte = pte_offset_kernel(pmd, gpa); + if (!pte_none(*pte)) /* Just a page... */ + return pte_young(*pte); + + return 0; +} + +int kvm_age_hva(struct kvm *kvm, unsigned long start, unsigned long end) +{ + trace_kvm_age_hva(start, end); + return handle_hva_to_gpa(kvm, start, end, kvm_age_hva_handler, NULL); +} + +int kvm_test_age_hva(struct kvm *kvm, unsigned long hva) +{ + trace_kvm_test_age_hva(hva); + return handle_hva_to_gpa(kvm, hva, hva, kvm_test_age_hva_handler, NULL); +} + void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu) { mmu_free_memory_cache(&vcpu->arch.mmu_page_cache); @@ -1477,12 +1624,18 @@ void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu) phys_addr_t kvm_mmu_get_httbr(void) { - return virt_to_phys(hyp_pgd); + if (__kvm_cpu_uses_extended_idmap()) + return virt_to_phys(merged_hyp_pgd); + else + return virt_to_phys(hyp_pgd); } phys_addr_t kvm_mmu_get_boot_httbr(void) { - return virt_to_phys(boot_hyp_pgd); + if (__kvm_cpu_uses_extended_idmap()) + return virt_to_phys(merged_hyp_pgd); + else + return virt_to_phys(boot_hyp_pgd); } phys_addr_t kvm_get_idmap_vector(void) @@ -1498,39 +1651,11 @@ int kvm_mmu_init(void) hyp_idmap_end = kvm_virt_to_phys(__hyp_idmap_text_end); hyp_idmap_vector = kvm_virt_to_phys(__kvm_hyp_init); - if ((hyp_idmap_start ^ hyp_idmap_end) & PAGE_MASK) { - /* - * Our init code is crossing a page boundary. Allocate - * a bounce page, copy the code over and use that. - */ - size_t len = __hyp_idmap_text_end - __hyp_idmap_text_start; - phys_addr_t phys_base; - - init_bounce_page = (void *)__get_free_page(GFP_KERNEL); - if (!init_bounce_page) { - kvm_err("Couldn't allocate HYP init bounce page\n"); - err = -ENOMEM; - goto out; - } - - memcpy(init_bounce_page, __hyp_idmap_text_start, len); - /* - * Warning: the code we just copied to the bounce page - * must be flushed to the point of coherency. - * Otherwise, the data may be sitting in L2, and HYP - * mode won't be able to observe it as it runs with - * caches off at that point. - */ - kvm_flush_dcache_to_poc(init_bounce_page, len); - - phys_base = kvm_virt_to_phys(init_bounce_page); - hyp_idmap_vector += phys_base - hyp_idmap_start; - hyp_idmap_start = phys_base; - hyp_idmap_end = phys_base + len; - - kvm_info("Using HYP init bounce page @%lx\n", - (unsigned long)phys_base); - } + /* + * We rely on the linker script to ensure at build time that the HYP + * init code does not cross a page boundary. + */ + BUG_ON((hyp_idmap_start ^ (hyp_idmap_end - 1)) & PAGE_MASK); hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, hyp_pgd_order); boot_hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, hyp_pgd_order); @@ -1553,6 +1678,17 @@ int kvm_mmu_init(void) goto out; } + if (__kvm_cpu_uses_extended_idmap()) { + merged_hyp_pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO); + if (!merged_hyp_pgd) { + kvm_err("Failed to allocate extra HYP pgd\n"); + goto out; + } + __kvm_extend_hypmap(boot_hyp_pgd, hyp_pgd, merged_hyp_pgd, + hyp_idmap_start); + return 0; + } + /* Map the very same page at the trampoline VA */ err = __create_hyp_mappings(boot_hyp_pgd, TRAMPOLINE_VA, TRAMPOLINE_VA + PAGE_SIZE, diff --git a/arch/arm/kvm/trace.h b/arch/arm/kvm/trace.h index 881874b1a036..0ec35392d208 100644 --- a/arch/arm/kvm/trace.h +++ b/arch/arm/kvm/trace.h @@ -25,18 +25,22 @@ TRACE_EVENT(kvm_entry, ); TRACE_EVENT(kvm_exit, - TP_PROTO(unsigned long vcpu_pc), - TP_ARGS(vcpu_pc), + TP_PROTO(unsigned int exit_reason, unsigned long vcpu_pc), + TP_ARGS(exit_reason, vcpu_pc), TP_STRUCT__entry( + __field( unsigned int, exit_reason ) __field( unsigned long, vcpu_pc ) ), TP_fast_assign( + __entry->exit_reason = exit_reason; __entry->vcpu_pc = vcpu_pc; ), - TP_printk("PC: 0x%08lx", __entry->vcpu_pc) + TP_printk("HSR_EC: 0x%04x, PC: 0x%08lx", + __entry->exit_reason, + __entry->vcpu_pc) ); TRACE_EVENT(kvm_guest_fault, @@ -64,6 +68,21 @@ TRACE_EVENT(kvm_guest_fault, __entry->hxfar, __entry->vcpu_pc) ); +TRACE_EVENT(kvm_access_fault, + TP_PROTO(unsigned long ipa), + TP_ARGS(ipa), + + TP_STRUCT__entry( + __field( unsigned long, ipa ) + ), + + TP_fast_assign( + __entry->ipa = ipa; + ), + + TP_printk("IPA: %lx", __entry->ipa) +); + TRACE_EVENT(kvm_irq_line, TP_PROTO(unsigned int type, int vcpu_idx, int irq_num, int level), TP_ARGS(type, vcpu_idx, irq_num, level), @@ -206,6 +225,39 @@ TRACE_EVENT(kvm_set_spte_hva, TP_printk("mmu notifier set pte hva: %#08lx", __entry->hva) ); +TRACE_EVENT(kvm_age_hva, + TP_PROTO(unsigned long start, unsigned long end), + TP_ARGS(start, end), + + TP_STRUCT__entry( + __field( unsigned long, start ) + __field( unsigned long, end ) + ), + + TP_fast_assign( + __entry->start = start; + __entry->end = end; + ), + + TP_printk("mmu notifier age hva: %#08lx -- %#08lx", + __entry->start, __entry->end) +); + +TRACE_EVENT(kvm_test_age_hva, + TP_PROTO(unsigned long hva), + TP_ARGS(hva), + + TP_STRUCT__entry( + __field( unsigned long, hva ) + ), + + TP_fast_assign( + __entry->hva = hva; + ), + + TP_printk("mmu notifier test age hva: %#08lx", __entry->hva) +); + TRACE_EVENT(kvm_hvc, TP_PROTO(unsigned long vcpu_pc, unsigned long r0, unsigned long imm), TP_ARGS(vcpu_pc, r0, imm), diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S index 14a0d988c82c..1710fd7db2d5 100644 --- a/arch/arm/lib/clear_user.S +++ b/arch/arm/lib/clear_user.S @@ -47,7 +47,7 @@ USER( strnebt r2, [r0]) ENDPROC(__clear_user) ENDPROC(__clear_user_std) - .pushsection .fixup,"ax" + .pushsection .text.fixup,"ax" .align 0 9001: ldmfd sp!, {r0, pc} .popsection diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S index a9d3db16ecb5..9648b0675a3e 100644 --- a/arch/arm/lib/copy_to_user.S +++ b/arch/arm/lib/copy_to_user.S @@ -100,7 +100,7 @@ WEAK(__copy_to_user) ENDPROC(__copy_to_user) ENDPROC(__copy_to_user_std) - .pushsection .fixup,"ax" + .pushsection .text.fixup,"ax" .align 0 copy_abort_preamble ldmfd sp!, {r1, r2, r3} diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S index 7d08b43d2c0e..1d0957e61f89 100644 --- a/arch/arm/lib/csumpartialcopyuser.S +++ b/arch/arm/lib/csumpartialcopyuser.S @@ -68,7 +68,7 @@ * so properly, we would have to add in whatever registers were loaded before * the fault, which, with the current asm above is not predictable. */ - .pushsection .fixup,"ax" + .pushsection .text.fixup,"ax" .align 4 9001: mov r4, #-EFAULT ldr r5, [sp, #8*4] @ *err_ptr diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 312d43eb686a..8044591dca72 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -83,6 +83,12 @@ void __init register_current_timer_delay(const struct delay_timer *timer) NSEC_PER_SEC, 3600); res = cyc_to_ns(1ULL, new_mult, new_shift); + if (res > 1000) { + pr_err("Ignoring delay timer %ps, which has insufficient resolution of %lluns\n", + timer, res); + return; + } + if (!delay_calibrated && (!delay_res || (res < delay_res))) { pr_info("Switching to timer-based delay loop, resolution %lluns\n", res); delay_timer = timer; diff --git a/arch/arm/mach-alpine/Kconfig b/arch/arm/mach-alpine/Kconfig new file mode 100644 index 000000000000..2c44b930505a --- /dev/null +++ b/arch/arm/mach-alpine/Kconfig @@ -0,0 +1,12 @@ +config ARCH_ALPINE + bool "Annapurna Labs Alpine platform" if ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select GENERIC_IRQ_CHIP + select HAVE_ARM_ARCH_TIMER + select HAVE_SMP + select MFD_SYSCON + select PCI + select PCI_HOST_GENERIC + help + This enables support for the Annapurna Labs Alpine V1 boards. diff --git a/arch/arm/mach-alpine/Makefile b/arch/arm/mach-alpine/Makefile new file mode 100644 index 000000000000..b6674890be71 --- /dev/null +++ b/arch/arm/mach-alpine/Makefile @@ -0,0 +1,2 @@ +obj-y += alpine_machine.o +obj-$(CONFIG_SMP) += platsmp.o alpine_cpu_pm.o diff --git a/arch/arm/mach-alpine/alpine_cpu_pm.c b/arch/arm/mach-alpine/alpine_cpu_pm.c new file mode 100644 index 000000000000..121c77c4b53c --- /dev/null +++ b/arch/arm/mach-alpine/alpine_cpu_pm.c @@ -0,0 +1,70 @@ +/* + * Low-level power-management support for Alpine platform. + * + * Copyright (C) 2015 Annapurna Labs Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> + +#include "alpine_cpu_pm.h" +#include "alpine_cpu_resume.h" + +/* NB registers */ +#define AL_SYSFAB_POWER_CONTROL(cpu) (0x2000 + (cpu)*0x100 + 0x20) + +static struct regmap *al_sysfabric; +static struct al_cpu_resume_regs __iomem *al_cpu_resume_regs; +static int wakeup_supported; + +int alpine_cpu_wakeup(unsigned int phys_cpu, uint32_t phys_resume_addr) +{ + if (!wakeup_supported) + return -ENOSYS; + + /* + * Set CPU resume address - + * secure firmware running on boot will jump to this address + * after setting proper CPU mode, and initialiing e.g. secure + * regs (the same mode all CPUs are booted to - usually HYP) + */ + writel(phys_resume_addr, + &al_cpu_resume_regs->per_cpu[phys_cpu].resume_addr); + + /* Power-up the CPU */ + regmap_write(al_sysfabric, AL_SYSFAB_POWER_CONTROL(phys_cpu), 0); + + return 0; +} + +void __init alpine_cpu_pm_init(void) +{ + struct device_node *np; + uint32_t watermark; + + al_sysfabric = syscon_regmap_lookup_by_compatible("al,alpine-sysfabric-service"); + + np = of_find_compatible_node(NULL, NULL, "al,alpine-cpu-resume"); + al_cpu_resume_regs = of_iomap(np, 0); + + wakeup_supported = !IS_ERR(al_sysfabric) && al_cpu_resume_regs; + + if (wakeup_supported) { + watermark = readl(&al_cpu_resume_regs->watermark); + wakeup_supported = (watermark & AL_CPU_RESUME_MAGIC_NUM_MASK) + == AL_CPU_RESUME_MAGIC_NUM; + } +} diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-alpine/alpine_cpu_pm.h index 2d9ca0455745..5179e697c492 100644 --- a/arch/arm/mach-at91/include/mach/io.h +++ b/arch/arm/mach-alpine/alpine_cpu_pm.h @@ -1,7 +1,7 @@ /* - * arch/arm/mach-at91/include/mach/io.h + * Low-level power-management support for Alpine platform. * - * Copyright (C) 2003 SAN People + * Copyright (C) 2015 Annapurna Labs Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -12,16 +12,15 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H +#ifndef __ALPINE_CPU_PM_H__ +#define __ALPINE_CPU_PM_H__ + +/* Alpine CPU Power Management Services Initialization */ +void alpine_cpu_pm_init(void); -#define IO_SPACE_LIMIT 0xFFFFFFFF -#define __io(a) __typesafe_io(a) +/* Wake-up a CPU */ +int alpine_cpu_wakeup(unsigned int phys_cpu, uint32_t phys_resume_addr); -#endif +#endif /* __ALPINE_CPU_PM_H__ */ diff --git a/arch/arm/mach-alpine/alpine_cpu_resume.h b/arch/arm/mach-alpine/alpine_cpu_resume.h new file mode 100644 index 000000000000..c80150c0d2d8 --- /dev/null +++ b/arch/arm/mach-alpine/alpine_cpu_resume.h @@ -0,0 +1,38 @@ +/* + * Annapurna labs cpu-resume register structure. + * + * Copyright (C) 2015 Annapurna Labs Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ALPINE_CPU_RESUME_H_ +#define ALPINE_CPU_RESUME_H_ + +/* Per-cpu regs */ +struct al_cpu_resume_regs_per_cpu { + uint32_t flags; + uint32_t resume_addr; +}; + +/* general regs */ +struct al_cpu_resume_regs { + /* Watermark for validating the CPU resume struct */ + uint32_t watermark; + uint32_t flags; + struct al_cpu_resume_regs_per_cpu per_cpu[]; +}; + +/* The expected magic number for validating the resume addresses */ +#define AL_CPU_RESUME_MAGIC_NUM 0xf0e1d200 +#define AL_CPU_RESUME_MAGIC_NUM_MASK 0xffffff00 + +#endif /* ALPINE_CPU_RESUME_H_ */ diff --git a/arch/arm/mach-alpine/alpine_machine.c b/arch/arm/mach-alpine/alpine_machine.c new file mode 100644 index 000000000000..b8e2145e962b --- /dev/null +++ b/arch/arm/mach-alpine/alpine_machine.c @@ -0,0 +1,28 @@ +/* + * Machine declaration for Alpine platforms. + * + * Copyright (C) 2015 Annapurna Labs Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/of_platform.h> + +#include <asm/mach/arch.h> + +static const char * const al_match[] __initconst = { + "al,alpine", + NULL, +}; + +DT_MACHINE_START(AL_DT, "Annapurna Labs Alpine") + .dt_compat = al_match, +MACHINE_END diff --git a/arch/arm/mach-alpine/platsmp.c b/arch/arm/mach-alpine/platsmp.c new file mode 100644 index 000000000000..f78429f48bd6 --- /dev/null +++ b/arch/arm/mach-alpine/platsmp.c @@ -0,0 +1,49 @@ +/* + * SMP operations for Alpine platform. + * + * Copyright (C) 2015 Annapurna Labs Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/of.h> + +#include <asm/smp_plat.h> + +#include "alpine_cpu_pm.h" + +static int alpine_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + phys_addr_t addr; + + addr = virt_to_phys(secondary_startup); + + if (addr > (phys_addr_t)(uint32_t)(-1)) { + pr_err("FAIL: resume address over 32bit (%pa)", &addr); + return -EINVAL; + } + + return alpine_cpu_wakeup(cpu_logical_map(cpu), (uint32_t)addr); +} + +static void __init alpine_smp_prepare_cpus(unsigned int max_cpus) +{ + alpine_cpu_pm_init(); +} + +static struct smp_operations alpine_smp_ops __initdata = { + .smp_prepare_cpus = alpine_smp_prepare_cpus, + .smp_boot_secondary = alpine_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(alpine_smp, "al,alpine-smp", &alpine_smp_ops); diff --git a/arch/arm/mach-asm9260/Kconfig b/arch/arm/mach-asm9260/Kconfig index 8423be76080e..52241207a82a 100644 --- a/arch/arm/mach-asm9260/Kconfig +++ b/arch/arm/mach-asm9260/Kconfig @@ -2,5 +2,7 @@ config MACH_ASM9260 bool "Alphascale ASM9260" depends on ARCH_MULTI_V5 select CPU_ARM926T + select ASM9260_TIMER + select GENERIC_CLOCKEVENTS help Support for Alphascale ASM9260 based platform. diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index c74a44324e5b..fd95f34945f4 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -1,55 +1,15 @@ -if ARCH_AT91 - -config HAVE_AT91_UTMI - bool - -config HAVE_AT91_USB_CLK - bool - -config COMMON_CLK_AT91 - bool - select COMMON_CLK - -config HAVE_AT91_SMD - bool - -config HAVE_AT91_H32MX - bool - -config SOC_SAMA5 - bool - select ATMEL_AIC5_IRQ +menuconfig ARCH_AT91 + bool "Atmel SoCs" + depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB select COMMON_CLK_AT91 - select CPU_V7 - select GENERIC_CLOCKEVENTS - select MEMORY - select ATMEL_SDRAMC - select PHYLIB if NETDEVICES - -menu "Atmel AT91 System-on-Chip" - -choice - - prompt "Core type" - -config SOC_SAM_V4_V5 - bool "ARM9 AT91SAM9/AT91RM9200" - help - Select this if you are using one of Atmel's AT91SAM9 or - AT91RM9200 SoC. - -config SOC_SAM_V7 - bool "Cortex A5" - help - Select this if you are using one of Atmel's SAMA5D3 SoC. - -endchoice + select PINCTRL + select PINCTRL_AT91 + select SOC_BUS -comment "Atmel AT91 Processor" - -if SOC_SAM_V7 +if ARCH_AT91 config SOC_SAMA5D3 - bool "SAMA5D3 family" + bool "SAMA5D3 family" if ARCH_MULTI_V7 select SOC_SAMA5 select HAVE_FB_ATMEL select HAVE_AT91_UTMI @@ -60,9 +20,8 @@ config SOC_SAMA5D3 This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36. config SOC_SAMA5D4 - bool "SAMA5D4 family" + bool "SAMA5D4 family" if ARCH_MULTI_V7 select SOC_SAMA5 - select CLKSRC_MMIO select CACHE_L2X0 select HAVE_FB_ATMEL select HAVE_AT91_UTMI @@ -71,29 +30,31 @@ config SOC_SAMA5D4 select HAVE_AT91_H32MX help Select this if you are using one of Atmel's SAMA5D4 family SoC. -endif -if SOC_SAM_V4_V5 config SOC_AT91RM9200 - bool "AT91RM9200" + bool "AT91RM9200" if ARCH_MULTI_V4T select ATMEL_AIC_IRQ - select COMMON_CLK_AT91 + select ATMEL_ST select CPU_ARM920T - select GENERIC_CLOCKEVENTS select HAVE_AT91_USB_CLK + select MIGHT_HAVE_PCI + select SOC_SAM_V4_V5 + select SRAM if PM + help + Select this if you are using Atmel's AT91RM9200 SoC. config SOC_AT91SAM9 - bool "AT91SAM9" + bool "AT91SAM9" if ARCH_MULTI_V5 select ATMEL_AIC_IRQ select ATMEL_SDRAMC - select COMMON_CLK_AT91 select CPU_ARM926T - select GENERIC_CLOCKEVENTS select HAVE_AT91_SMD select HAVE_AT91_USB_CLK select HAVE_AT91_UTMI select HAVE_FB_ATMEL select MEMORY + select SOC_SAM_V4_V5 + select SRAM if PM help Select this if you are using one of those Atmel SoC: AT91SAM9260 @@ -112,40 +73,35 @@ config SOC_AT91SAM9 AT91SAM9X25 AT91SAM9X35 AT91SAM9XE -endif # SOC_SAM_V4_V5 -comment "AT91 Feature Selections" +config HAVE_AT91_UTMI + bool -config AT91_SLOW_CLOCK - bool "Suspend-to-RAM disables main oscillator" - select SRAM - depends on SUSPEND - help - Select this if you want Suspend-to-RAM to save the most power - possible (without powering off the CPU) by disabling the PLLs - and main oscillator so that only the 32 KiHz clock is available. +config HAVE_AT91_USB_CLK + bool - When only that slow-clock is available, some peripherals lose - functionality. Many can't issue wakeup events unless faster - clocks are available. Some lose their operating state and - need to be completely re-initialized. +config COMMON_CLK_AT91 + bool + select COMMON_CLK -config AT91_TIMER_HZ - int "Kernel HZ (jiffies per second)" - range 32 1024 - depends on ARCH_AT91 - default "128" if SOC_AT91RM9200 - default "100" - help - On AT91rm9200 chips where you're using a system clock derived - from the 32768 Hz hardware clock, this tick rate should divide - it exactly: use a power-of-two value, such as 128 or 256, to - reduce timing errors caused by rounding. +config HAVE_AT91_SMD + bool + +config HAVE_AT91_H32MX + bool - On AT91sam926x chips, or otherwise when using a higher precision - system clock (of at least several MHz), rounding is less of a - problem so it can be safer to use a decimal values like 100. +config SOC_SAM_V4_V5 + bool -endmenu +config SOC_SAM_V7 + bool + +config SOC_SAMA5 + bool + select ATMEL_AIC5_IRQ + select ATMEL_SDRAMC + select MEMORY + select SOC_SAM_V7 + select SRAM if PM endif diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 827fdbcce1c7..4fa8b4541e64 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -1,20 +1,25 @@ # # Makefile for the linux kernel. # +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include +asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -obj-y := setup.o +obj-y := soc.o obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o # CPU-specific support -obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o at91rm9200_time.o +obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o obj-$(CONFIG_SOC_SAMA5) += sama5.o # Power Management obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o +obj-$(CONFIG_PM) += pm_suspend.o +ifeq ($(CONFIG_CPU_V7),y) +AFLAGS_pm_suspend.o := -march=armv7-a +endif ifeq ($(CONFIG_PM_DEBUG),y) CFLAGS_pm.o += -DDEBUG endif diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 8fcfb70f7124..eaf58f88ef5d 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -8,60 +8,42 @@ * Licensed under GPLv2 or later. */ -#include <linux/types.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/gpio.h> +#include <linux/clk-provider.h> #include <linux/of.h> -#include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/clk-provider.h> -#include <asm/setup.h> -#include <asm/irq.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> #include <asm/system_misc.h> -#include <mach/at91_st.h> - #include "generic.h" +#include "soc.h" -static void at91rm9200_restart(enum reboot_mode reboot_mode, const char *cmd) -{ - /* - * Perform a hardware reset with the use of the Watchdog timer. - */ - at91_st_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1); - at91_st_write(AT91_ST_CR, AT91_ST_WDRST); -} - -static void __init at91rm9200_dt_timer_init(void) -{ - of_clk_init(NULL); - at91rm9200_timer_init(); -} +static const struct at91_soc rm9200_socs[] = { + AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"), + { /* sentinel */ }, +}; static void __init at91rm9200_dt_device_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + struct soc_device *soc; + struct device *soc_dev = NULL; + + soc = at91_soc_init(rm9200_socs); + if (soc != NULL) + soc_dev = soc_device_to_device(soc); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); arm_pm_idle = at91rm9200_idle; - arm_pm_restart = at91rm9200_restart; at91rm9200_pm_init(); } - - static const char *at91rm9200_dt_board_compat[] __initconst = { "atmel,at91rm9200", NULL }; DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200") - .init_time = at91rm9200_dt_timer_init, - .map_io = at91_map_io, .init_machine = at91rm9200_dt_device_init, .dt_compat = at91rm9200_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c deleted file mode 100644 index b00d09555f2b..000000000000 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ /dev/null @@ -1,251 +0,0 @@ -/* - * linux/arch/arm/mach-at91/at91rm9200_time.c - * - * Copyright (C) 2003 SAN People - * Copyright (C) 2003 ATMEL - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/clockchips.h> -#include <linux/export.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#include <asm/mach/time.h> - -#include <mach/at91_st.h> -#include <mach/hardware.h> - -static unsigned long last_crtr; -static u32 irqmask; -static struct clock_event_device clkevt; - -#define RM9200_TIMER_LATCH ((AT91_SLOW_CLOCK + HZ/2) / HZ) - -/* - * The ST_CRTR is updated asynchronously to the master clock ... but - * the updates as seen by the CPU don't seem to be strictly monotonic. - * Waiting until we read the same value twice avoids glitching. - */ -static inline unsigned long read_CRTR(void) -{ - unsigned long x1, x2; - - x1 = at91_st_read(AT91_ST_CRTR); - do { - x2 = at91_st_read(AT91_ST_CRTR); - if (x1 == x2) - break; - x1 = x2; - } while (1); - return x1; -} - -/* - * IRQ handler for the timer. - */ -static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id) -{ - u32 sr = at91_st_read(AT91_ST_SR) & irqmask; - - /* - * irqs should be disabled here, but as the irq is shared they are only - * guaranteed to be off if the timer irq is registered first. - */ - WARN_ON_ONCE(!irqs_disabled()); - - /* simulate "oneshot" timer with alarm */ - if (sr & AT91_ST_ALMS) { - clkevt.event_handler(&clkevt); - return IRQ_HANDLED; - } - - /* periodic mode should handle delayed ticks */ - if (sr & AT91_ST_PITS) { - u32 crtr = read_CRTR(); - - while (((crtr - last_crtr) & AT91_ST_CRTV) >= RM9200_TIMER_LATCH) { - last_crtr += RM9200_TIMER_LATCH; - clkevt.event_handler(&clkevt); - } - return IRQ_HANDLED; - } - - /* this irq is shared ... */ - return IRQ_NONE; -} - -static struct irqaction at91rm9200_timer_irq = { - .name = "at91_tick", - .flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = at91rm9200_timer_interrupt, - .irq = NR_IRQS_LEGACY + AT91_ID_SYS, -}; - -static cycle_t read_clk32k(struct clocksource *cs) -{ - return read_CRTR(); -} - -static struct clocksource clk32k = { - .name = "32k_counter", - .rating = 150, - .read = read_clk32k, - .mask = CLOCKSOURCE_MASK(20), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static void -clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev) -{ - /* Disable and flush pending timer interrupts */ - at91_st_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS); - at91_st_read(AT91_ST_SR); - - last_crtr = read_CRTR(); - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - /* PIT for periodic irqs; fixed rate of 1/HZ */ - irqmask = AT91_ST_PITS; - at91_st_write(AT91_ST_PIMR, RM9200_TIMER_LATCH); - break; - case CLOCK_EVT_MODE_ONESHOT: - /* ALM for oneshot irqs, set by next_event() - * before 32 seconds have passed - */ - irqmask = AT91_ST_ALMS; - at91_st_write(AT91_ST_RTAR, last_crtr); - break; - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_RESUME: - irqmask = 0; - break; - } - at91_st_write(AT91_ST_IER, irqmask); -} - -static int -clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) -{ - u32 alm; - int status = 0; - - BUG_ON(delta < 2); - - /* The alarm IRQ uses absolute time (now+delta), not the relative - * time (delta) in our calling convention. Like all clockevents - * using such "match" hardware, we have a race to defend against. - * - * Our defense here is to have set up the clockevent device so the - * delta is at least two. That way we never end up writing RTAR - * with the value then held in CRTR ... which would mean the match - * wouldn't trigger until 32 seconds later, after CRTR wraps. - */ - alm = read_CRTR(); - - /* Cancel any pending alarm; flush any pending IRQ */ - at91_st_write(AT91_ST_RTAR, alm); - at91_st_read(AT91_ST_SR); - - /* Schedule alarm by writing RTAR. */ - alm += delta; - at91_st_write(AT91_ST_RTAR, alm); - - return status; -} - -static struct clock_event_device clkevt = { - .name = "at91_tick", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .rating = 150, - .set_next_event = clkevt32k_next_event, - .set_mode = clkevt32k_mode, -}; - -void __iomem *at91_st_base; -EXPORT_SYMBOL_GPL(at91_st_base); - -static const struct of_device_id at91rm9200_st_timer_ids[] = { - { .compatible = "atmel,at91rm9200-st" }, - { /* sentinel */ } -}; - -static int __init of_at91rm9200_st_init(void) -{ - struct device_node *np; - int ret; - - np = of_find_matching_node(NULL, at91rm9200_st_timer_ids); - if (!np) - goto err; - - at91_st_base = of_iomap(np, 0); - if (!at91_st_base) - goto node_err; - - /* Get the interrupts property */ - ret = irq_of_parse_and_map(np, 0); - if (!ret) - goto ioremap_err; - at91rm9200_timer_irq.irq = ret; - - of_node_put(np); - - return 0; - -ioremap_err: - iounmap(at91_st_base); -node_err: - of_node_put(np); -err: - return -EINVAL; -} - -/* - * ST (system timer) module supports both clockevents and clocksource. - */ -void __init at91rm9200_timer_init(void) -{ - /* For device tree enabled device: initialize here */ - of_at91rm9200_st_init(); - - /* Disable all timer interrupts, and clear any pending ones */ - at91_st_write(AT91_ST_IDR, - AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS); - at91_st_read(AT91_ST_SR); - - /* Make IRQs happen for the system timer */ - setup_irq(at91rm9200_timer_irq.irq, &at91rm9200_timer_irq); - - /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used - * directly for the clocksource and all clockevents, after adjusting - * its prescaler from the 1 Hz default. - */ - at91_st_write(AT91_ST_RTMR, 1); - - /* Setup timer clockevent, with minimum of two ticks (important!!) */ - clkevt.cpumask = cpumask_of(0); - clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, - 2, AT91_ST_ALMV); - - /* register clocksource */ - clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); -} diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c index 56e3ba73ec40..e47a2093a0e7 100644 --- a/arch/arm/mach-at91/at91sam9.c +++ b/arch/arm/mach-at91/at91sam9.c @@ -7,29 +7,68 @@ * Licensed under GPLv2 or later. */ -#include <linux/types.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/gpio.h> #include <linux/of.h> -#include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/clk-provider.h> -#include <asm/system_misc.h> -#include <asm/setup.h> -#include <asm/irq.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> +#include <asm/system_misc.h> #include "generic.h" +#include "soc.h" -static void __init at91sam9_dt_device_init(void) +static const struct at91_soc at91sam9_socs[] = { + AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL), + AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL), + AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL), + AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL), + AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL), + AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH, + "at91sam9m11", "at91sam9g45"), + AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH, + "at91sam9m10", "at91sam9g45"), + AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH, + "at91sam9g46", "at91sam9g45"), + AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH, + "at91sam9g45", "at91sam9g45"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH, + "at91sam9g15", "at91sam9x5"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH, + "at91sam9g35", "at91sam9x5"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH, + "at91sam9x35", "at91sam9x5"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH, + "at91sam9g25", "at91sam9x5"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH, + "at91sam9x25", "at91sam9x5"), + AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH, + "at91sam9cn12", "at91sam9n12"), + AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH, + "at91sam9n12", "at91sam9n12"), + AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH, + "at91sam9cn11", "at91sam9n12"), + AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"), + AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"), + AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"), + { /* sentinel */ }, +}; + +static void __init at91sam9_common_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + struct soc_device *soc; + struct device *soc_dev = NULL; + + soc = at91_soc_init(at91sam9_socs); + if (soc != NULL) + soc_dev = soc_device_to_device(soc); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); arm_pm_idle = at91sam9_idle; +} + +static void __init at91sam9_dt_device_init(void) +{ + at91sam9_common_init(); at91sam9260_pm_init(); } @@ -40,16 +79,13 @@ static const char *at91_dt_board_compat[] __initconst = { DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9") /* Maintainer: Atmel */ - .map_io = at91_map_io, .init_machine = at91sam9_dt_device_init, .dt_compat = at91_dt_board_compat, MACHINE_END static void __init at91sam9g45_dt_device_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - - arm_pm_idle = at91sam9_idle; + at91sam9_common_init(); at91sam9g45_pm_init(); } @@ -60,16 +96,13 @@ static const char *at91sam9g45_board_compat[] __initconst = { DT_MACHINE_START(at91sam9g45_dt, "Atmel AT91SAM9G45") /* Maintainer: Atmel */ - .map_io = at91_map_io, .init_machine = at91sam9g45_dt_device_init, .dt_compat = at91sam9g45_board_compat, MACHINE_END static void __init at91sam9x5_dt_device_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - - arm_pm_idle = at91sam9_idle; + at91sam9_common_init(); at91sam9x5_pm_init(); } @@ -81,7 +114,6 @@ static const char *at91sam9x5_board_compat[] __initconst = { DT_MACHINE_START(at91sam9x5_dt, "Atmel AT91SAM9") /* Maintainer: Atmel */ - .map_io = at91_map_io, .init_machine = at91sam9x5_dt_device_init, .dt_compat = at91sam9x5_board_compat, MACHINE_END diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 583369ffc284..b0fa7dc7286d 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -18,17 +18,10 @@ extern void __init at91_map_io(void); extern void __init at91_alt_map_io(void); - /* Timer */ -extern void at91rm9200_timer_init(void); - /* idle */ extern void at91rm9200_idle(void); extern void at91sam9_idle(void); -/* Matrix */ -extern void at91_ioremap_matrix(u32 base_addr); - - #ifdef CONFIG_PM extern void __init at91rm9200_pm_init(void); extern void __init at91sam9260_pm_init(void); diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h deleted file mode 100644 index 42925e8f78e4..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_dbgu.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_dbgu.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Debug Unit (DBGU) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_DBGU_H -#define AT91_DBGU_H - -#define AT91_DBGU_CR (0x00) /* Control Register */ -#define AT91_DBGU_MR (0x04) /* Mode Register */ -#define AT91_DBGU_IER (0x08) /* Interrupt Enable Register */ -#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */ -#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */ -#define AT91_DBGU_IDR (0x0c) /* Interrupt Disable Register */ -#define AT91_DBGU_IMR (0x10) /* Interrupt Mask Register */ -#define AT91_DBGU_SR (0x14) /* Status Register */ -#define AT91_DBGU_RHR (0x18) /* Receiver Holding Register */ -#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */ -#define AT91_DBGU_BRGR (0x20) /* Baud Rate Generator Register */ - -#define AT91_DBGU_CIDR (0x40) /* Chip ID Register */ -#define AT91_DBGU_EXID (0x44) /* Chip ID Extension Register */ -#define AT91_DBGU_FNR (0x48) /* Force NTRST Register [SAM9 only] */ -#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */ - -/* - * Some AT91 parts that don't have full DEBUG units still support the ID - * and extensions register. - */ -#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */ -#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */ -#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */ -#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */ -#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */ -#define AT91_CIDR_SRAMSIZ_1K (1 << 16) -#define AT91_CIDR_SRAMSIZ_2K (2 << 16) -#define AT91_CIDR_SRAMSIZ_112K (4 << 16) -#define AT91_CIDR_SRAMSIZ_4K (5 << 16) -#define AT91_CIDR_SRAMSIZ_80K (6 << 16) -#define AT91_CIDR_SRAMSIZ_160K (7 << 16) -#define AT91_CIDR_SRAMSIZ_8K (8 << 16) -#define AT91_CIDR_SRAMSIZ_16K (9 << 16) -#define AT91_CIDR_SRAMSIZ_32K (10 << 16) -#define AT91_CIDR_SRAMSIZ_64K (11 << 16) -#define AT91_CIDR_SRAMSIZ_128K (12 << 16) -#define AT91_CIDR_SRAMSIZ_256K (13 << 16) -#define AT91_CIDR_SRAMSIZ_96K (14 << 16) -#define AT91_CIDR_SRAMSIZ_512K (15 << 16) -#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */ -#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */ -#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91_matrix.h b/arch/arm/mach-at91/include/mach/at91_matrix.h deleted file mode 100644 index f8996c954131..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_matrix.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Under GPLv2 - */ - -#ifndef __MACH_AT91_MATRIX_H__ -#define __MACH_AT91_MATRIX_H__ - -#ifndef __ASSEMBLY__ -extern void __iomem *at91_matrix_base; - -#define at91_matrix_read(field) \ - __raw_readl(at91_matrix_base + field) - -#define at91_matrix_write(field, value) \ - __raw_writel(value, at91_matrix_base + field) - -#else -.extern at91_matrix_base -#endif - -#endif /* __MACH_AT91_MATRIX_H__ */ diff --git a/arch/arm/mach-at91/include/mach/at91_ramc.h b/arch/arm/mach-at91/include/mach/at91_ramc.h index e4492b151fee..493bc486e858 100644 --- a/arch/arm/mach-at91/include/mach/at91_ramc.h +++ b/arch/arm/mach-at91/include/mach/at91_ramc.h @@ -21,10 +21,6 @@ extern void __iomem *at91_ramc_base[]; .extern at91_ramc_base #endif -#define AT91_MEMCTRL_MC 0 -#define AT91_MEMCTRL_SDRAMC 1 -#define AT91_MEMCTRL_DDRSDR 2 - #include <soc/at91/at91rm9200_sdramc.h> #include <soc/at91/at91sam9_ddrsdr.h> #include <soc/at91/at91sam9_sdramc.h> diff --git a/arch/arm/mach-at91/include/mach/at91_st.h b/arch/arm/mach-at91/include/mach/at91_st.h deleted file mode 100644 index 67fdbd13c3ed..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_st.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_st.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * System Timer (ST) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_ST_H -#define AT91_ST_H - -#ifndef __ASSEMBLY__ -extern void __iomem *at91_st_base; - -#define at91_st_read(field) \ - __raw_readl(at91_st_base + field) - -#define at91_st_write(field, value) \ - __raw_writel(value, at91_st_base + field) -#else -.extern at91_st_base -#endif - -#define AT91_ST_CR 0x00 /* Control Register */ -#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */ - -#define AT91_ST_PIMR 0x04 /* Period Interval Mode Register */ -#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */ - -#define AT91_ST_WDMR 0x08 /* Watchdog Mode Register */ -#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */ -#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */ -#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */ - -#define AT91_ST_RTMR 0x0c /* Real-time Mode Register */ -#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */ - -#define AT91_ST_SR 0x10 /* Status Register */ -#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */ -#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */ -#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */ -#define AT91_ST_ALMS (1 << 3) /* Alarm Status */ - -#define AT91_ST_IER 0x14 /* Interrupt Enable Register */ -#define AT91_ST_IDR 0x18 /* Interrupt Disable Register */ -#define AT91_ST_IMR 0x1c /* Interrupt Mask Register */ - -#define AT91_ST_RTAR 0x20 /* Real-time Alarm Register */ -#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */ - -#define AT91_ST_CRTR 0x24 /* Current Real-time Register */ -#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h deleted file mode 100644 index e67317c67761..000000000000 --- a/arch/arm/mach-at91/include/mach/at91rm9200.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91rm9200.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Common definitions. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_H -#define AT91RM9200_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91RM9200_ID_PIOD 5 /* Parallel IO Controller D */ -#define AT91RM9200_ID_US0 6 /* USART 0 */ -#define AT91RM9200_ID_US1 7 /* USART 1 */ -#define AT91RM9200_ID_US2 8 /* USART 2 */ -#define AT91RM9200_ID_US3 9 /* USART 3 */ -#define AT91RM9200_ID_MCI 10 /* Multimedia Card Interface */ -#define AT91RM9200_ID_UDP 11 /* USB Device Port */ -#define AT91RM9200_ID_TWI 12 /* Two-Wire Interface */ -#define AT91RM9200_ID_SPI 13 /* Serial Peripheral Interface */ -#define AT91RM9200_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT91RM9200_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT91RM9200_ID_SSC2 16 /* Serial Synchronous Controller 2 */ -#define AT91RM9200_ID_TC0 17 /* Timer Counter 0 */ -#define AT91RM9200_ID_TC1 18 /* Timer Counter 1 */ -#define AT91RM9200_ID_TC2 19 /* Timer Counter 2 */ -#define AT91RM9200_ID_TC3 20 /* Timer Counter 3 */ -#define AT91RM9200_ID_TC4 21 /* Timer Counter 4 */ -#define AT91RM9200_ID_TC5 22 /* Timer Counter 5 */ -#define AT91RM9200_ID_UHP 23 /* USB Host port */ -#define AT91RM9200_ID_EMAC 24 /* Ethernet MAC */ -#define AT91RM9200_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91RM9200_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */ -#define AT91RM9200_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */ -#define AT91RM9200_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */ -#define AT91RM9200_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */ -#define AT91RM9200_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */ -#define AT91RM9200_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */ - - -/* - * Peripheral physical base addresses. - */ -#define AT91RM9200_BASE_TCB0 0xfffa0000 -#define AT91RM9200_BASE_TC0 0xfffa0000 -#define AT91RM9200_BASE_TC1 0xfffa0040 -#define AT91RM9200_BASE_TC2 0xfffa0080 -#define AT91RM9200_BASE_TCB1 0xfffa4000 -#define AT91RM9200_BASE_TC3 0xfffa4000 -#define AT91RM9200_BASE_TC4 0xfffa4040 -#define AT91RM9200_BASE_TC5 0xfffa4080 -#define AT91RM9200_BASE_UDP 0xfffb0000 -#define AT91RM9200_BASE_MCI 0xfffb4000 -#define AT91RM9200_BASE_TWI 0xfffb8000 -#define AT91RM9200_BASE_EMAC 0xfffbc000 -#define AT91RM9200_BASE_US0 0xfffc0000 -#define AT91RM9200_BASE_US1 0xfffc4000 -#define AT91RM9200_BASE_US2 0xfffc8000 -#define AT91RM9200_BASE_US3 0xfffcc000 -#define AT91RM9200_BASE_SSC0 0xfffd0000 -#define AT91RM9200_BASE_SSC1 0xfffd4000 -#define AT91RM9200_BASE_SSC2 0xfffd8000 -#define AT91RM9200_BASE_SPI 0xfffe0000 - - -/* - * System Peripherals - */ -#define AT91RM9200_BASE_DBGU AT91_BASE_DBGU0 /* Debug Unit */ -#define AT91RM9200_BASE_PIOA 0xfffff400 /* PIO Controller A */ -#define AT91RM9200_BASE_PIOB 0xfffff600 /* PIO Controller B */ -#define AT91RM9200_BASE_PIOC 0xfffff800 /* PIO Controller C */ -#define AT91RM9200_BASE_PIOD 0xfffffa00 /* PIO Controller D */ -#define AT91RM9200_BASE_ST 0xfffffd00 /* System Timer */ -#define AT91RM9200_BASE_RTC 0xfffffe00 /* Real-Time Clock */ -#define AT91RM9200_BASE_MC 0xffffff00 /* Memory Controllers */ - -/* - * Internal Memory. - */ -#define AT91RM9200_ROM_BASE 0x00100000 /* Internal ROM base address */ -#define AT91RM9200_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ - -#define AT91RM9200_SRAM_BASE 0x00200000 /* Internal SRAM base address */ -#define AT91RM9200_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */ - -#define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */ - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h deleted file mode 100644 index 416c7b6c56d3..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9260.h - * - * (C) 2006 Andrew Victor - * - * Common definitions. - * Based on AT91SAM9260 datasheet revision A (Preliminary). - * - * Includes also definitions for AT91SAM9XE and AT91SAM9G families - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9260_H -#define AT91SAM9260_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91SAM9260_ID_ADC 5 /* Analog-to-Digital Converter */ -#define AT91SAM9260_ID_US0 6 /* USART 0 */ -#define AT91SAM9260_ID_US1 7 /* USART 1 */ -#define AT91SAM9260_ID_US2 8 /* USART 2 */ -#define AT91SAM9260_ID_MCI 9 /* Multimedia Card Interface */ -#define AT91SAM9260_ID_UDP 10 /* USB Device Port */ -#define AT91SAM9260_ID_TWI 11 /* Two-Wire Interface */ -#define AT91SAM9260_ID_SPI0 12 /* Serial Peripheral Interface 0 */ -#define AT91SAM9260_ID_SPI1 13 /* Serial Peripheral Interface 1 */ -#define AT91SAM9260_ID_SSC 14 /* Serial Synchronous Controller */ -#define AT91SAM9260_ID_TC0 17 /* Timer Counter 0 */ -#define AT91SAM9260_ID_TC1 18 /* Timer Counter 1 */ -#define AT91SAM9260_ID_TC2 19 /* Timer Counter 2 */ -#define AT91SAM9260_ID_UHP 20 /* USB Host port */ -#define AT91SAM9260_ID_EMAC 21 /* Ethernet */ -#define AT91SAM9260_ID_ISI 22 /* Image Sensor Interface */ -#define AT91SAM9260_ID_US3 23 /* USART 3 */ -#define AT91SAM9260_ID_US4 24 /* USART 4 */ -#define AT91SAM9260_ID_US5 25 /* USART 5 */ -#define AT91SAM9260_ID_TC3 26 /* Timer Counter 3 */ -#define AT91SAM9260_ID_TC4 27 /* Timer Counter 4 */ -#define AT91SAM9260_ID_TC5 28 /* Timer Counter 5 */ -#define AT91SAM9260_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91SAM9260_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */ -#define AT91SAM9260_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9260_BASE_TCB0 0xfffa0000 -#define AT91SAM9260_BASE_TC0 0xfffa0000 -#define AT91SAM9260_BASE_TC1 0xfffa0040 -#define AT91SAM9260_BASE_TC2 0xfffa0080 -#define AT91SAM9260_BASE_UDP 0xfffa4000 -#define AT91SAM9260_BASE_MCI 0xfffa8000 -#define AT91SAM9260_BASE_TWI 0xfffac000 -#define AT91SAM9260_BASE_US0 0xfffb0000 -#define AT91SAM9260_BASE_US1 0xfffb4000 -#define AT91SAM9260_BASE_US2 0xfffb8000 -#define AT91SAM9260_BASE_SSC 0xfffbc000 -#define AT91SAM9260_BASE_ISI 0xfffc0000 -#define AT91SAM9260_BASE_EMAC 0xfffc4000 -#define AT91SAM9260_BASE_SPI0 0xfffc8000 -#define AT91SAM9260_BASE_SPI1 0xfffcc000 -#define AT91SAM9260_BASE_US3 0xfffd0000 -#define AT91SAM9260_BASE_US4 0xfffd4000 -#define AT91SAM9260_BASE_US5 0xfffd8000 -#define AT91SAM9260_BASE_TCB1 0xfffdc000 -#define AT91SAM9260_BASE_TC3 0xfffdc000 -#define AT91SAM9260_BASE_TC4 0xfffdc040 -#define AT91SAM9260_BASE_TC5 0xfffdc080 -#define AT91SAM9260_BASE_ADC 0xfffe0000 - -/* - * System Peripherals - */ -#define AT91SAM9260_BASE_ECC 0xffffe800 -#define AT91SAM9260_BASE_SDRAMC 0xffffea00 -#define AT91SAM9260_BASE_SMC 0xffffec00 -#define AT91SAM9260_BASE_MATRIX 0xffffee00 -#define AT91SAM9260_BASE_DBGU AT91_BASE_DBGU0 -#define AT91SAM9260_BASE_PIOA 0xfffff400 -#define AT91SAM9260_BASE_PIOB 0xfffff600 -#define AT91SAM9260_BASE_PIOC 0xfffff800 -#define AT91SAM9260_BASE_RSTC 0xfffffd00 -#define AT91SAM9260_BASE_SHDWC 0xfffffd10 -#define AT91SAM9260_BASE_RTT 0xfffffd20 -#define AT91SAM9260_BASE_PIT 0xfffffd30 -#define AT91SAM9260_BASE_WDT 0xfffffd40 -#define AT91SAM9260_BASE_GPBR 0xfffffd50 - - -/* - * Internal Memory. - */ -#define AT91SAM9260_ROM_BASE 0x00100000 /* Internal ROM base address */ -#define AT91SAM9260_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ - -#define AT91SAM9260_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */ -#define AT91SAM9260_SRAM0_SIZE SZ_4K /* Internal SRAM 0 size (4Kb) */ -#define AT91SAM9260_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */ -#define AT91SAM9260_SRAM1_SIZE SZ_4K /* Internal SRAM 1 size (4Kb) */ -#define AT91SAM9260_SRAM_BASE 0x002FF000 /* Internal SRAM base address */ -#define AT91SAM9260_SRAM_SIZE SZ_8K /* Internal SRAM size (8Kb) */ - -#define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */ - -#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */ -#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */ - -#define AT91SAM9G20_ROM_BASE 0x00100000 /* Internal ROM base address */ -#define AT91SAM9G20_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ - -#define AT91SAM9G20_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */ -#define AT91SAM9G20_SRAM0_SIZE SZ_16K /* Internal SRAM 0 size (16Kb) */ -#define AT91SAM9G20_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */ -#define AT91SAM9G20_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */ -#define AT91SAM9G20_SRAM_BASE 0x002FC000 /* Internal SRAM base address */ -#define AT91SAM9G20_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */ - -#define AT91SAM9G20_UHP_BASE 0x00500000 /* USB Host controller */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h deleted file mode 100644 index f459df420629..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9260_matrix.h - * - * Copyright (C) 2007 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9260 datasheet revision B. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9260_MATRIX_H -#define AT91SAM9260_MATRIX_H - -#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ - -#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ - -#define AT91_MATRIX_EBICSA 0x11C /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h deleted file mode 100644 index a041406d06ee..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9261.h - * - * Copyright (C) SAN People - * - * Common definitions. - * Based on AT91SAM9261 datasheet revision E. (Preliminary) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9261_H -#define AT91SAM9261_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91SAM9261_ID_US0 6 /* USART 0 */ -#define AT91SAM9261_ID_US1 7 /* USART 1 */ -#define AT91SAM9261_ID_US2 8 /* USART 2 */ -#define AT91SAM9261_ID_MCI 9 /* Multimedia Card Interface */ -#define AT91SAM9261_ID_UDP 10 /* USB Device Port */ -#define AT91SAM9261_ID_TWI 11 /* Two-Wire Interface */ -#define AT91SAM9261_ID_SPI0 12 /* Serial Peripheral Interface 0 */ -#define AT91SAM9261_ID_SPI1 13 /* Serial Peripheral Interface 1 */ -#define AT91SAM9261_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT91SAM9261_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT91SAM9261_ID_SSC2 16 /* Serial Synchronous Controller 2 */ -#define AT91SAM9261_ID_TC0 17 /* Timer Counter 0 */ -#define AT91SAM9261_ID_TC1 18 /* Timer Counter 1 */ -#define AT91SAM9261_ID_TC2 19 /* Timer Counter 2 */ -#define AT91SAM9261_ID_UHP 20 /* USB Host port */ -#define AT91SAM9261_ID_LCDC 21 /* LDC Controller */ -#define AT91SAM9261_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91SAM9261_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */ -#define AT91SAM9261_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9261_BASE_TCB0 0xfffa0000 -#define AT91SAM9261_BASE_TC0 0xfffa0000 -#define AT91SAM9261_BASE_TC1 0xfffa0040 -#define AT91SAM9261_BASE_TC2 0xfffa0080 -#define AT91SAM9261_BASE_UDP 0xfffa4000 -#define AT91SAM9261_BASE_MCI 0xfffa8000 -#define AT91SAM9261_BASE_TWI 0xfffac000 -#define AT91SAM9261_BASE_US0 0xfffb0000 -#define AT91SAM9261_BASE_US1 0xfffb4000 -#define AT91SAM9261_BASE_US2 0xfffb8000 -#define AT91SAM9261_BASE_SSC0 0xfffbc000 -#define AT91SAM9261_BASE_SSC1 0xfffc0000 -#define AT91SAM9261_BASE_SSC2 0xfffc4000 -#define AT91SAM9261_BASE_SPI0 0xfffc8000 -#define AT91SAM9261_BASE_SPI1 0xfffcc000 - - -/* - * System Peripherals - */ -#define AT91SAM9261_BASE_SMC 0xffffec00 -#define AT91SAM9261_BASE_MATRIX 0xffffee00 -#define AT91SAM9261_BASE_SDRAMC 0xffffea00 -#define AT91SAM9261_BASE_DBGU AT91_BASE_DBGU0 -#define AT91SAM9261_BASE_PIOA 0xfffff400 -#define AT91SAM9261_BASE_PIOB 0xfffff600 -#define AT91SAM9261_BASE_PIOC 0xfffff800 -#define AT91SAM9261_BASE_RSTC 0xfffffd00 -#define AT91SAM9261_BASE_SHDWC 0xfffffd10 -#define AT91SAM9261_BASE_RTT 0xfffffd20 -#define AT91SAM9261_BASE_PIT 0xfffffd30 -#define AT91SAM9261_BASE_WDT 0xfffffd40 -#define AT91SAM9261_BASE_GPBR 0xfffffd50 - - -/* - * Internal Memory. - */ -#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */ - -#define AT91SAM9G10_SRAM_BASE AT91SAM9261_SRAM_BASE /* Internal SRAM base address */ -#define AT91SAM9G10_SRAM_SIZE 0x00004000 /* Internal SRAM size (16Kb) */ - -#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ - -#define AT91SAM9261_UHP_BASE 0x00500000 /* USB Host controller */ -#define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */ - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h deleted file mode 100644 index a50cdf8b8ca4..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h - * - * Copyright (C) 2007 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9261_MATRIX_H -#define AT91SAM9261_MATRIX_H - -#define AT91_MATRIX_MCFG 0x00 /* Master Configuration Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ - -#define AT91_MATRIX_SCFG0 0x04 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x08 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x0C /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x10 /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x14 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ - -#define AT91_MATRIX_TCR 0x24 /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_ITCM_64 (7 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_DTCM_64 (7 << 4) - -#define AT91_MATRIX_EBICSA 0x30 /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ - -#define AT91_MATRIX_USBPUCR 0x34 /* USB Pad Pull-Up Control Register */ -#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h deleted file mode 100644 index d201029d60b3..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9263.h - * - * (C) 2007 Atmel Corporation. - * - * Common definitions. - * Based on AT91SAM9263 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9263_H -#define AT91SAM9263_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */ -#define AT91SAM9263_ID_US0 7 /* USART 0 */ -#define AT91SAM9263_ID_US1 8 /* USART 1 */ -#define AT91SAM9263_ID_US2 9 /* USART 2 */ -#define AT91SAM9263_ID_MCI0 10 /* Multimedia Card Interface 0 */ -#define AT91SAM9263_ID_MCI1 11 /* Multimedia Card Interface 1 */ -#define AT91SAM9263_ID_CAN 12 /* CAN */ -#define AT91SAM9263_ID_TWI 13 /* Two-Wire Interface */ -#define AT91SAM9263_ID_SPI0 14 /* Serial Peripheral Interface 0 */ -#define AT91SAM9263_ID_SPI1 15 /* Serial Peripheral Interface 1 */ -#define AT91SAM9263_ID_SSC0 16 /* Serial Synchronous Controller 0 */ -#define AT91SAM9263_ID_SSC1 17 /* Serial Synchronous Controller 1 */ -#define AT91SAM9263_ID_AC97C 18 /* AC97 Controller */ -#define AT91SAM9263_ID_TCB 19 /* Timer Counter 0, 1 and 2 */ -#define AT91SAM9263_ID_PWMC 20 /* Pulse Width Modulation Controller */ -#define AT91SAM9263_ID_EMAC 21 /* Ethernet */ -#define AT91SAM9263_ID_2DGE 23 /* 2D Graphic Engine */ -#define AT91SAM9263_ID_UDP 24 /* USB Device Port */ -#define AT91SAM9263_ID_ISI 25 /* Image Sensor Interface */ -#define AT91SAM9263_ID_LCDC 26 /* LCD Controller */ -#define AT91SAM9263_ID_DMA 27 /* DMA Controller */ -#define AT91SAM9263_ID_UHP 29 /* USB Host port */ -#define AT91SAM9263_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91SAM9263_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9263_BASE_UDP 0xfff78000 -#define AT91SAM9263_BASE_TCB0 0xfff7c000 -#define AT91SAM9263_BASE_TC0 0xfff7c000 -#define AT91SAM9263_BASE_TC1 0xfff7c040 -#define AT91SAM9263_BASE_TC2 0xfff7c080 -#define AT91SAM9263_BASE_MCI0 0xfff80000 -#define AT91SAM9263_BASE_MCI1 0xfff84000 -#define AT91SAM9263_BASE_TWI 0xfff88000 -#define AT91SAM9263_BASE_US0 0xfff8c000 -#define AT91SAM9263_BASE_US1 0xfff90000 -#define AT91SAM9263_BASE_US2 0xfff94000 -#define AT91SAM9263_BASE_SSC0 0xfff98000 -#define AT91SAM9263_BASE_SSC1 0xfff9c000 -#define AT91SAM9263_BASE_AC97C 0xfffa0000 -#define AT91SAM9263_BASE_SPI0 0xfffa4000 -#define AT91SAM9263_BASE_SPI1 0xfffa8000 -#define AT91SAM9263_BASE_CAN 0xfffac000 -#define AT91SAM9263_BASE_PWMC 0xfffb8000 -#define AT91SAM9263_BASE_EMAC 0xfffbc000 -#define AT91SAM9263_BASE_ISI 0xfffc4000 -#define AT91SAM9263_BASE_2DGE 0xfffc8000 - -/* - * System Peripherals - */ -#define AT91SAM9263_BASE_ECC0 0xffffe000 -#define AT91SAM9263_BASE_SDRAMC0 0xffffe200 -#define AT91SAM9263_BASE_SMC0 0xffffe400 -#define AT91SAM9263_BASE_ECC1 0xffffe600 -#define AT91SAM9263_BASE_SDRAMC1 0xffffe800 -#define AT91SAM9263_BASE_SMC1 0xffffea00 -#define AT91SAM9263_BASE_MATRIX 0xffffec00 -#define AT91SAM9263_BASE_DBGU AT91_BASE_DBGU1 -#define AT91SAM9263_BASE_PIOA 0xfffff200 -#define AT91SAM9263_BASE_PIOB 0xfffff400 -#define AT91SAM9263_BASE_PIOC 0xfffff600 -#define AT91SAM9263_BASE_PIOD 0xfffff800 -#define AT91SAM9263_BASE_PIOE 0xfffffa00 -#define AT91SAM9263_BASE_RSTC 0xfffffd00 -#define AT91SAM9263_BASE_SHDWC 0xfffffd10 -#define AT91SAM9263_BASE_RTT0 0xfffffd20 -#define AT91SAM9263_BASE_PIT 0xfffffd30 -#define AT91SAM9263_BASE_WDT 0xfffffd40 -#define AT91SAM9263_BASE_RTT1 0xfffffd50 -#define AT91SAM9263_BASE_GPBR 0xfffffd60 - -#define AT91_SMC AT91_SMC0 - -/* - * Internal Memory. - */ -#define AT91SAM9263_SRAM0_BASE 0x00300000 /* Internal SRAM 0 base address */ -#define AT91SAM9263_SRAM0_SIZE (80 * SZ_1K) /* Internal SRAM 0 size (80Kb) */ - -#define AT91SAM9263_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91SAM9263_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ - -#define AT91SAM9263_SRAM1_BASE 0x00500000 /* Internal SRAM 1 base address */ -#define AT91SAM9263_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */ - -#define AT91SAM9263_LCDC_BASE 0x00700000 /* LCD Controller */ -#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */ -#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */ - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h deleted file mode 100644 index ebb5fdb565e0..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9263_matrix.h - * - * Copyright (C) 2006 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9263 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9263_MATRIX_H -#define AT91SAM9263_MATRIX_H - -#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ - -#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) - -#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) - -#define AT91_MATRIX_EBI0CSA 0x120 /* EBI0 Chip Select Assignment Register */ -#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16) - -#define AT91_MATRIX_EBI1CSA 0x124 /* EBI1 Chip Select Assignment Register */ -#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3) -#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16) - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h index 175e1fdd9fe8..ff54a0ce90e3 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h @@ -16,8 +16,6 @@ #ifndef AT91SAM9_SMC_H #define AT91SAM9_SMC_H -#include <mach/cpu.h> - #ifndef __ASSEMBLY__ struct sam9_smc_config { /* Setup register */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h deleted file mode 100644 index 8eba1021f533..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Chip-specific header file for the AT91SAM9G45 family - * - * Copyright (C) 2008-2009 Atmel Corporation. - * - * Common definitions. - * Based on AT91SAM9G45 preliminary datasheet. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9G45_H -#define AT91SAM9G45_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */ -#define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */ -#define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */ -#define AT91SAM9G45_ID_PIODE 5 /* Parallel I/O Controller D and E */ -#define AT91SAM9G45_ID_TRNG 6 /* True Random Number Generator */ -#define AT91SAM9G45_ID_US0 7 /* USART 0 */ -#define AT91SAM9G45_ID_US1 8 /* USART 1 */ -#define AT91SAM9G45_ID_US2 9 /* USART 2 */ -#define AT91SAM9G45_ID_US3 10 /* USART 3 */ -#define AT91SAM9G45_ID_MCI0 11 /* High Speed Multimedia Card Interface 0 */ -#define AT91SAM9G45_ID_TWI0 12 /* Two-Wire Interface 0 */ -#define AT91SAM9G45_ID_TWI1 13 /* Two-Wire Interface 1 */ -#define AT91SAM9G45_ID_SPI0 14 /* Serial Peripheral Interface 0 */ -#define AT91SAM9G45_ID_SPI1 15 /* Serial Peripheral Interface 1 */ -#define AT91SAM9G45_ID_SSC0 16 /* Synchronous Serial Controller 0 */ -#define AT91SAM9G45_ID_SSC1 17 /* Synchronous Serial Controller 1 */ -#define AT91SAM9G45_ID_TCB 18 /* Timer Counter 0, 1, 2, 3, 4 and 5 */ -#define AT91SAM9G45_ID_PWMC 19 /* Pulse Width Modulation Controller */ -#define AT91SAM9G45_ID_TSC 20 /* Touch Screen ADC Controller */ -#define AT91SAM9G45_ID_DMA 21 /* DMA Controller */ -#define AT91SAM9G45_ID_UHPHS 22 /* USB Host High Speed */ -#define AT91SAM9G45_ID_LCDC 23 /* LCD Controller */ -#define AT91SAM9G45_ID_AC97C 24 /* AC97 Controller */ -#define AT91SAM9G45_ID_EMAC 25 /* Ethernet MAC */ -#define AT91SAM9G45_ID_ISI 26 /* Image Sensor Interface */ -#define AT91SAM9G45_ID_UDPHS 27 /* USB Device High Speed */ -#define AT91SAM9G45_ID_AESTDESSHA 28 /* AES + T-DES + SHA */ -#define AT91SAM9G45_ID_MCI1 29 /* High Speed Multimedia Card Interface 1 */ -#define AT91SAM9G45_ID_VDEC 30 /* Video Decoder */ -#define AT91SAM9G45_ID_IRQ0 31 /* Advanced Interrupt Controller */ - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9G45_BASE_UDPHS 0xfff78000 -#define AT91SAM9G45_BASE_TCB0 0xfff7c000 -#define AT91SAM9G45_BASE_TC0 0xfff7c000 -#define AT91SAM9G45_BASE_TC1 0xfff7c040 -#define AT91SAM9G45_BASE_TC2 0xfff7c080 -#define AT91SAM9G45_BASE_MCI0 0xfff80000 -#define AT91SAM9G45_BASE_TWI0 0xfff84000 -#define AT91SAM9G45_BASE_TWI1 0xfff88000 -#define AT91SAM9G45_BASE_US0 0xfff8c000 -#define AT91SAM9G45_BASE_US1 0xfff90000 -#define AT91SAM9G45_BASE_US2 0xfff94000 -#define AT91SAM9G45_BASE_US3 0xfff98000 -#define AT91SAM9G45_BASE_SSC0 0xfff9c000 -#define AT91SAM9G45_BASE_SSC1 0xfffa0000 -#define AT91SAM9G45_BASE_SPI0 0xfffa4000 -#define AT91SAM9G45_BASE_SPI1 0xfffa8000 -#define AT91SAM9G45_BASE_AC97C 0xfffac000 -#define AT91SAM9G45_BASE_TSC 0xfffb0000 -#define AT91SAM9G45_BASE_ISI 0xfffb4000 -#define AT91SAM9G45_BASE_PWMC 0xfffb8000 -#define AT91SAM9G45_BASE_EMAC 0xfffbc000 -#define AT91SAM9G45_BASE_AES 0xfffc0000 -#define AT91SAM9G45_BASE_TDES 0xfffc4000 -#define AT91SAM9G45_BASE_SHA 0xfffc8000 -#define AT91SAM9G45_BASE_TRNG 0xfffcc000 -#define AT91SAM9G45_BASE_MCI1 0xfffd0000 -#define AT91SAM9G45_BASE_TCB1 0xfffd4000 -#define AT91SAM9G45_BASE_TC3 0xfffd4000 -#define AT91SAM9G45_BASE_TC4 0xfffd4040 -#define AT91SAM9G45_BASE_TC5 0xfffd4080 - -/* - * System Peripherals - */ -#define AT91SAM9G45_BASE_ECC 0xffffe200 -#define AT91SAM9G45_BASE_DDRSDRC1 0xffffe400 -#define AT91SAM9G45_BASE_DDRSDRC0 0xffffe600 -#define AT91SAM9G45_BASE_DMA 0xffffec00 -#define AT91SAM9G45_BASE_SMC 0xffffe800 -#define AT91SAM9G45_BASE_MATRIX 0xffffea00 -#define AT91SAM9G45_BASE_DBGU AT91_BASE_DBGU1 -#define AT91SAM9G45_BASE_PIOA 0xfffff200 -#define AT91SAM9G45_BASE_PIOB 0xfffff400 -#define AT91SAM9G45_BASE_PIOC 0xfffff600 -#define AT91SAM9G45_BASE_PIOD 0xfffff800 -#define AT91SAM9G45_BASE_PIOE 0xfffffa00 -#define AT91SAM9G45_BASE_RSTC 0xfffffd00 -#define AT91SAM9G45_BASE_SHDWC 0xfffffd10 -#define AT91SAM9G45_BASE_RTT 0xfffffd20 -#define AT91SAM9G45_BASE_PIT 0xfffffd30 -#define AT91SAM9G45_BASE_WDT 0xfffffd40 -#define AT91SAM9G45_BASE_RTC 0xfffffdb0 -#define AT91SAM9G45_BASE_GPBR 0xfffffd60 - -/* - * Internal Memory. - */ -#define AT91SAM9G45_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT91SAM9G45_SRAM_SIZE SZ_64K /* Internal SRAM size (64Kb) */ - -#define AT91SAM9G45_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91SAM9G45_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */ - -#define AT91SAM9G45_LCDC_BASE 0x00500000 /* LCD Controller */ -#define AT91SAM9G45_UDPHS_FIFO 0x00600000 /* USB Device HS controller */ -#define AT91SAM9G45_OHCI_BASE 0x00700000 /* USB Host controller (OHCI) */ -#define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */ -#define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */ - -/* - * DMA peripheral identifiers - * for hardware handshaking interface - */ -#define AT_DMA_ID_MCI0 0 -#define AT_DMA_ID_SPI0_TX 1 -#define AT_DMA_ID_SPI0_RX 2 -#define AT_DMA_ID_SPI1_TX 3 -#define AT_DMA_ID_SPI1_RX 4 -#define AT_DMA_ID_SSC0_TX 5 -#define AT_DMA_ID_SSC0_RX 6 -#define AT_DMA_ID_SSC1_TX 7 -#define AT_DMA_ID_SSC1_RX 8 -#define AT_DMA_ID_AC97_TX 9 -#define AT_DMA_ID_AC97_RX 10 -#define AT_DMA_ID_AES_TX 11 -#define AT_DMA_ID_AES_RX 12 -#define AT_DMA_ID_MCI1 13 - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h deleted file mode 100644 index b76e2ed2fbc2..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * Matrix-centric header file for the AT91SAM9G45 family - * - * Copyright (C) 2008-2009 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9G45 preliminary datasheet. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9G45_MATRIX_H -#define AT91SAM9G45_MATRIX_H - -#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */ -#define AT91_MATRIX_MCFG9 0x24 /* Master Configuration Register 9 */ -#define AT91_MATRIX_MCFG10 0x28 /* Master Configuration Register 10 */ -#define AT91_MATRIX_MCFG11 0x2C /* Master Configuration Register 11 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) -#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0) -#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0) -#define AT91_MATRIX_ULBT_128 (7 << 0) - -#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */ -#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ - -#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ -#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ -#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ -#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ - -#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) -#define AT91_MATRIX_RCB9 (1 << 9) -#define AT91_MATRIX_RCB10 (1 << 10) -#define AT91_MATRIX_RCB11 (1 << 11) - -#define AT91_MATRIX_TCMR 0x110 /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_DTCM_64 (7 << 4) -#define AT91_MATRIX_TCM_NWS (0x1 << 11) /* Wait state TCM register */ -#define AT91_MATRIX_TCM_NO_WS (0x0 << 11) -#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11) - -#define AT91_MATRIX_VIDEO 0x118 /* Video Mode Configuration Register */ -#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */ -#define AT91C_VDEC_SEL_OFF (0 << 0) -#define AT91C_VDEC_SEL_ON (1 << 0) - -#define AT91_MATRIX_EBICSA 0x128 /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4) -#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) -#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) -#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ -#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) -#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) -#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ -#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) -#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) - -#define AT91_MATRIX_WPMR 0x1E4 /* Write Protect Mode Register */ -#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ -#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) -#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) -#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ - -#define AT91_MATRIX_WPSR 0x1E8 /* Write Protect Status Register */ -#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ -#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) -#define AT91_MATRIX_WPSR_WPV (1 << 0) -#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12.h b/arch/arm/mach-at91/include/mach/at91sam9n12.h deleted file mode 100644 index 0151bcf6163c..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9n12.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * SoC specific header file for the AT91SAM9N12 - * - * Copyright (C) 2012 Atmel Corporation - * - * Common definitions, based on AT91SAM9N12 SoC datasheet - * - * Licensed under GPLv2 or later - */ - -#ifndef _AT91SAM9N12_H_ -#define _AT91SAM9N12_H_ - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91SAM9N12_ID_PIOAB 2 /* Parallel I/O Controller A and B */ -#define AT91SAM9N12_ID_PIOCD 3 /* Parallel I/O Controller C and D */ -#define AT91SAM9N12_ID_FUSE 4 /* FUSE Controller */ -#define AT91SAM9N12_ID_USART0 5 /* USART 0 */ -#define AT91SAM9N12_ID_USART1 6 /* USART 1 */ -#define AT91SAM9N12_ID_USART2 7 /* USART 2 */ -#define AT91SAM9N12_ID_USART3 8 /* USART 3 */ -#define AT91SAM9N12_ID_TWI0 9 /* Two-Wire Interface 0 */ -#define AT91SAM9N12_ID_TWI1 10 /* Two-Wire Interface 1 */ -#define AT91SAM9N12_ID_MCI 12 /* High Speed Multimedia Card Interface */ -#define AT91SAM9N12_ID_SPI0 13 /* Serial Peripheral Interface 0 */ -#define AT91SAM9N12_ID_SPI1 14 /* Serial Peripheral Interface 1 */ -#define AT91SAM9N12_ID_UART0 15 /* UART 0 */ -#define AT91SAM9N12_ID_UART1 16 /* UART 1 */ -#define AT91SAM9N12_ID_TCB 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */ -#define AT91SAM9N12_ID_PWM 18 /* Pulse Width Modulation Controller */ -#define AT91SAM9N12_ID_ADC 19 /* ADC Controller */ -#define AT91SAM9N12_ID_DMA 20 /* DMA Controller */ -#define AT91SAM9N12_ID_UHP 22 /* USB Host High Speed */ -#define AT91SAM9N12_ID_UDP 23 /* USB Device High Speed */ -#define AT91SAM9N12_ID_LCDC 25 /* LCD Controller */ -#define AT91SAM9N12_ID_ISI 25 /* Image Sensor Interface */ -#define AT91SAM9N12_ID_SSC 28 /* Synchronous Serial Controller */ -#define AT91SAM9N12_ID_TRNG 30 /* TRNG */ -#define AT91SAM9N12_ID_IRQ0 31 /* Advanced Interrupt Controller */ - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9N12_BASE_USART0 0xf801c000 -#define AT91SAM9N12_BASE_USART1 0xf8020000 -#define AT91SAM9N12_BASE_USART2 0xf8024000 -#define AT91SAM9N12_BASE_USART3 0xf8028000 - -/* - * System Peripherals - */ -#define AT91SAM9N12_BASE_RTC 0xfffffeb0 - -/* - * Internal Memory. - */ -#define AT91SAM9N12_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT91SAM9N12_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */ - -#define AT91SAM9N12_ROM_BASE 0x00100000 /* Internal ROM base address */ -#define AT91SAM9N12_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h deleted file mode 100644 index 40060cd62fa9..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Matrix-centric header file for the AT91SAM9N12 - * - * Copyright (C) 2012 Atmel Corporation. - * - * Only EBI related registers. - * Write Protect register definitions may be useful. - * - * Licensed under GPLv2 or later. - */ - -#ifndef _AT91SAM9N12_MATRIX_H_ -#define _AT91SAM9N12_MATRIX_H_ - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x118) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) -#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) -#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ -#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) -#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) -#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ -#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) -#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) -#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */ -#define AT91_MATRIX_NFD0_ON_D0 (0 << 24) -#define AT91_MATRIX_NFD0_ON_D16 (1 << 24) -#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */ -#define AT91_MATRIX_MP_OFF (0 << 25) -#define AT91_MATRIX_MP_ON (1 << 25) - -#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ -#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ -#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) -#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) -#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ - -#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ -#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ -#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) -#define AT91_MATRIX_WPSR_WPV (1 << 0) -#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h deleted file mode 100644 index a15db56d33fa..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9260.h - * - * Copyright (C) 2007 Atmel Corporation - * - * Common definitions. - * Based on AT91SAM9RL datasheet revision A. (Preliminary) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#ifndef AT91SAM9RL_H -#define AT91SAM9RL_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */ -#define AT91SAM9RL_ID_US0 6 /* USART 0 */ -#define AT91SAM9RL_ID_US1 7 /* USART 1 */ -#define AT91SAM9RL_ID_US2 8 /* USART 2 */ -#define AT91SAM9RL_ID_US3 9 /* USART 3 */ -#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */ -#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */ -#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */ -#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */ -#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */ -#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */ -#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */ -#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */ -#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */ -#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */ -#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */ -#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */ -#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */ -#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9RL_BASE_TCB0 0xfffa0000 -#define AT91SAM9RL_BASE_TC0 0xfffa0000 -#define AT91SAM9RL_BASE_TC1 0xfffa0040 -#define AT91SAM9RL_BASE_TC2 0xfffa0080 -#define AT91SAM9RL_BASE_MCI 0xfffa4000 -#define AT91SAM9RL_BASE_TWI0 0xfffa8000 -#define AT91SAM9RL_BASE_TWI1 0xfffac000 -#define AT91SAM9RL_BASE_US0 0xfffb0000 -#define AT91SAM9RL_BASE_US1 0xfffb4000 -#define AT91SAM9RL_BASE_US2 0xfffb8000 -#define AT91SAM9RL_BASE_US3 0xfffbc000 -#define AT91SAM9RL_BASE_SSC0 0xfffc0000 -#define AT91SAM9RL_BASE_SSC1 0xfffc4000 -#define AT91SAM9RL_BASE_PWMC 0xfffc8000 -#define AT91SAM9RL_BASE_SPI 0xfffcc000 -#define AT91SAM9RL_BASE_TSC 0xfffd0000 -#define AT91SAM9RL_BASE_UDPHS 0xfffd4000 -#define AT91SAM9RL_BASE_AC97C 0xfffd8000 - - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS) - -#define AT91SAM9RL_BASE_DMA 0xffffe600 -#define AT91SAM9RL_BASE_ECC 0xffffe800 -#define AT91SAM9RL_BASE_SDRAMC 0xffffea00 -#define AT91SAM9RL_BASE_SMC 0xffffec00 -#define AT91SAM9RL_BASE_MATRIX 0xffffee00 -#define AT91SAM9RL_BASE_DBGU AT91_BASE_DBGU0 -#define AT91SAM9RL_BASE_PIOA 0xfffff400 -#define AT91SAM9RL_BASE_PIOB 0xfffff600 -#define AT91SAM9RL_BASE_PIOC 0xfffff800 -#define AT91SAM9RL_BASE_PIOD 0xfffffa00 -#define AT91SAM9RL_BASE_RSTC 0xfffffd00 -#define AT91SAM9RL_BASE_SHDWC 0xfffffd10 -#define AT91SAM9RL_BASE_RTT 0xfffffd20 -#define AT91SAM9RL_BASE_PIT 0xfffffd30 -#define AT91SAM9RL_BASE_WDT 0xfffffd40 -#define AT91SAM9RL_BASE_GPBR 0xfffffd60 -#define AT91SAM9RL_BASE_RTC 0xfffffe00 - - -/* - * Internal Memory. - */ -#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */ - -#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */ - -#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */ -#define AT91SAM9RL_UDPHS_FIFO 0x00600000 /* USB Device HS controller */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h deleted file mode 100644 index 6d160adadafc..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h - * - * Copyright (C) 2007 Atmel Corporation - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9RL datasheet revision A. (Preliminary) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#ifndef AT91SAM9RL_MATRIX_H -#define AT91SAM9RL_MATRIX_H - -#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ - -#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) - -#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) - -#define AT91_MATRIX_EBICSA 0x120 /* EBI0 Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h deleted file mode 100644 index 2fc76c49e97c..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9x5.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Chip-specific header file for the AT91SAM9x5 family - * - * Copyright (C) 2009-2012 Atmel Corporation. - * - * Common definitions. - * Based on AT91SAM9x5 datasheet. - * - * Licensed under GPLv2 or later. - */ - -#ifndef AT91SAM9X5_H -#define AT91SAM9X5_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91SAM9X5_ID_PIOAB 2 /* Parallel I/O Controller A and B */ -#define AT91SAM9X5_ID_PIOCD 3 /* Parallel I/O Controller C and D */ -#define AT91SAM9X5_ID_SMD 4 /* SMD Soft Modem (SMD) */ -#define AT91SAM9X5_ID_USART0 5 /* USART 0 */ -#define AT91SAM9X5_ID_USART1 6 /* USART 1 */ -#define AT91SAM9X5_ID_USART2 7 /* USART 2 */ -#define AT91SAM9X5_ID_USART3 8 /* USART 3 */ -#define AT91SAM9X5_ID_TWI0 9 /* Two-Wire Interface 0 */ -#define AT91SAM9X5_ID_TWI1 10 /* Two-Wire Interface 1 */ -#define AT91SAM9X5_ID_TWI2 11 /* Two-Wire Interface 2 */ -#define AT91SAM9X5_ID_MCI0 12 /* High Speed Multimedia Card Interface 0 */ -#define AT91SAM9X5_ID_SPI0 13 /* Serial Peripheral Interface 0 */ -#define AT91SAM9X5_ID_SPI1 14 /* Serial Peripheral Interface 1 */ -#define AT91SAM9X5_ID_UART0 15 /* UART 0 */ -#define AT91SAM9X5_ID_UART1 16 /* UART 1 */ -#define AT91SAM9X5_ID_TCB 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */ -#define AT91SAM9X5_ID_PWM 18 /* Pulse Width Modulation Controller */ -#define AT91SAM9X5_ID_ADC 19 /* ADC Controller */ -#define AT91SAM9X5_ID_DMA0 20 /* DMA Controller 0 */ -#define AT91SAM9X5_ID_DMA1 21 /* DMA Controller 1 */ -#define AT91SAM9X5_ID_UHPHS 22 /* USB Host High Speed */ -#define AT91SAM9X5_ID_UDPHS 23 /* USB Device High Speed */ -#define AT91SAM9X5_ID_EMAC0 24 /* Ethernet MAC0 */ -#define AT91SAM9X5_ID_LCDC 25 /* LCD Controller */ -#define AT91SAM9X5_ID_ISI 25 /* Image Sensor Interface */ -#define AT91SAM9X5_ID_MCI1 26 /* High Speed Multimedia Card Interface 1 */ -#define AT91SAM9X5_ID_EMAC1 27 /* Ethernet MAC1 */ -#define AT91SAM9X5_ID_SSC 28 /* Synchronous Serial Controller */ -#define AT91SAM9X5_ID_CAN0 29 /* CAN Controller 0 */ -#define AT91SAM9X5_ID_CAN1 30 /* CAN Controller 1 */ -#define AT91SAM9X5_ID_IRQ0 31 /* Advanced Interrupt Controller */ - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9X5_BASE_USART0 0xf801c000 -#define AT91SAM9X5_BASE_USART1 0xf8020000 -#define AT91SAM9X5_BASE_USART2 0xf8024000 - -/* - * System Peripherals - */ -#define AT91SAM9X5_BASE_RTC 0xfffffeb0 - -/* - * Internal Memory. - */ -#define AT91SAM9X5_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT91SAM9X5_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */ - -#define AT91SAM9X5_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91SAM9X5_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h deleted file mode 100644 index a606d3966470..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Matrix-centric header file for the AT91SAM9x5 family - * - * Copyright (C) 2009-2012 Atmel Corporation. - * - * Only EBI related registers. - * Write Protect register definitions may be useful. - * - * Licensed under GPLv2 or later. - */ - -#ifndef AT91SAM9X5_MATRIX_H -#define AT91SAM9X5_MATRIX_H - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) -#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) -#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ -#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) -#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) -#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ -#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) -#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) -#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */ -#define AT91_MATRIX_NFD0_ON_D0 (0 << 24) -#define AT91_MATRIX_NFD0_ON_D16 (1 << 24) -#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */ -#define AT91_MATRIX_MP_OFF (0 << 25) -#define AT91_MATRIX_MP_ON (1 << 25) - -#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ -#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ -#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) -#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) -#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ - -#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ -#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ -#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) -#define AT91_MATRIX_WPSR_WPV (1 << 0) -#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h deleted file mode 100644 index ce7c80a44983..000000000000 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ /dev/null @@ -1,216 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/cpu.h - * - * Copyright (C) 2006 SAN People - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __MACH_CPU_H__ -#define __MACH_CPU_H__ - -#define ARCH_ID_AT91RM9200 0x09290780 -#define ARCH_ID_AT91SAM9260 0x019803a0 -#define ARCH_ID_AT91SAM9261 0x019703a0 -#define ARCH_ID_AT91SAM9263 0x019607a0 -#define ARCH_ID_AT91SAM9G10 0x019903a0 -#define ARCH_ID_AT91SAM9G20 0x019905a0 -#define ARCH_ID_AT91SAM9RL64 0x019b03a0 -#define ARCH_ID_AT91SAM9G45 0x819b05a0 -#define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */ -#define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */ -#define ARCH_ID_AT91SAM9X5 0x819a05a0 -#define ARCH_ID_AT91SAM9N12 0x819a07a0 - -#define ARCH_ID_AT91SAM9XE128 0x329973a0 -#define ARCH_ID_AT91SAM9XE256 0x329a93a0 -#define ARCH_ID_AT91SAM9XE512 0x329aa3a0 - -#define ARCH_ID_AT91M40800 0x14080044 -#define ARCH_ID_AT91R40807 0x44080746 -#define ARCH_ID_AT91M40807 0x14080745 -#define ARCH_ID_AT91R40008 0x44000840 - -#define ARCH_ID_SAMA5 0x8A5C07C0 - -#define ARCH_EXID_AT91SAM9M11 0x00000001 -#define ARCH_EXID_AT91SAM9M10 0x00000002 -#define ARCH_EXID_AT91SAM9G46 0x00000003 -#define ARCH_EXID_AT91SAM9G45 0x00000004 - -#define ARCH_EXID_AT91SAM9G15 0x00000000 -#define ARCH_EXID_AT91SAM9G35 0x00000001 -#define ARCH_EXID_AT91SAM9X35 0x00000002 -#define ARCH_EXID_AT91SAM9G25 0x00000003 -#define ARCH_EXID_AT91SAM9X25 0x00000004 - -#define ARCH_EXID_SAMA5D3 0x00004300 -#define ARCH_EXID_SAMA5D31 0x00444300 -#define ARCH_EXID_SAMA5D33 0x00414300 -#define ARCH_EXID_SAMA5D34 0x00414301 -#define ARCH_EXID_SAMA5D35 0x00584300 -#define ARCH_EXID_SAMA5D36 0x00004301 - -#define ARCH_EXID_SAMA5D4 0x00000007 -#define ARCH_EXID_SAMA5D41 0x00000001 -#define ARCH_EXID_SAMA5D42 0x00000002 -#define ARCH_EXID_SAMA5D43 0x00000003 -#define ARCH_EXID_SAMA5D44 0x00000004 - -#define ARCH_FAMILY_AT91SAM9 0x01900000 -#define ARCH_FAMILY_AT91SAM9XE 0x02900000 - -/* RM9200 type */ -#define ARCH_REVISON_9200_BGA (0 << 0) -#define ARCH_REVISON_9200_PQFP (1 << 0) - -#ifndef __ASSEMBLY__ -enum at91_soc_type { - /* 920T */ - AT91_SOC_RM9200, - - /* SAM92xx */ - AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263, - - /* SAM9Gxx */ - AT91_SOC_SAM9G10, AT91_SOC_SAM9G20, AT91_SOC_SAM9G45, - - /* SAM9RL */ - AT91_SOC_SAM9RL, - - /* SAM9X5 */ - AT91_SOC_SAM9X5, - - /* SAM9N12 */ - AT91_SOC_SAM9N12, - - /* SAMA5D3 */ - AT91_SOC_SAMA5D3, - - /* SAMA5D4 */ - AT91_SOC_SAMA5D4, - - /* Unknown type */ - AT91_SOC_UNKNOWN, -}; - -enum at91_soc_subtype { - /* RM9200 */ - AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP, - - /* SAM9260 */ - AT91_SOC_SAM9XE, - - /* SAM9G45 */ - AT91_SOC_SAM9G45ES, AT91_SOC_SAM9M10, AT91_SOC_SAM9G46, AT91_SOC_SAM9M11, - - /* SAM9X5 */ - AT91_SOC_SAM9G15, AT91_SOC_SAM9G35, AT91_SOC_SAM9X35, - AT91_SOC_SAM9G25, AT91_SOC_SAM9X25, - - /* SAMA5D3 */ - AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34, - AT91_SOC_SAMA5D35, AT91_SOC_SAMA5D36, - - /* SAMA5D4 */ - AT91_SOC_SAMA5D41, AT91_SOC_SAMA5D42, AT91_SOC_SAMA5D43, - AT91_SOC_SAMA5D44, - - /* No subtype for this SoC */ - AT91_SOC_SUBTYPE_NONE, - - /* Unknown subtype */ - AT91_SOC_SUBTYPE_UNKNOWN, -}; - -struct at91_socinfo { - unsigned int type, subtype; - unsigned int cidr, exid; -}; - -extern struct at91_socinfo at91_soc_initdata; -const char *at91_get_soc_type(struct at91_socinfo *c); -const char *at91_get_soc_subtype(struct at91_socinfo *c); - -static inline int at91_soc_is_detected(void) -{ - return at91_soc_initdata.type != AT91_SOC_UNKNOWN; -} - -#ifdef CONFIG_SOC_AT91RM9200 -#define cpu_is_at91rm9200() (at91_soc_initdata.type == AT91_SOC_RM9200) -#define cpu_is_at91rm9200_bga() (at91_soc_initdata.subtype == AT91_SOC_RM9200_BGA) -#define cpu_is_at91rm9200_pqfp() (at91_soc_initdata.subtype == AT91_SOC_RM9200_PQFP) -#else -#define cpu_is_at91rm9200() (0) -#define cpu_is_at91rm9200_bga() (0) -#define cpu_is_at91rm9200_pqfp() (0) -#endif - -#ifdef CONFIG_SOC_AT91SAM9 -#define cpu_is_at91sam9xe() (at91_soc_initdata.subtype == AT91_SOC_SAM9XE) -#define cpu_is_at91sam9260() (at91_soc_initdata.type == AT91_SOC_SAM9260) -#define cpu_is_at91sam9g20() (at91_soc_initdata.type == AT91_SOC_SAM9G20) -#define cpu_is_at91sam9261() (at91_soc_initdata.type == AT91_SOC_SAM9261) -#define cpu_is_at91sam9g10() (at91_soc_initdata.type == AT91_SOC_SAM9G10) -#define cpu_is_at91sam9263() (at91_soc_initdata.type == AT91_SOC_SAM9263) -#define cpu_is_at91sam9rl() (at91_soc_initdata.type == AT91_SOC_SAM9RL) -#define cpu_is_at91sam9g45() (at91_soc_initdata.type == AT91_SOC_SAM9G45) -#define cpu_is_at91sam9g45es() (at91_soc_initdata.subtype == AT91_SOC_SAM9G45ES) -#define cpu_is_at91sam9m10() (at91_soc_initdata.subtype == AT91_SOC_SAM9M10) -#define cpu_is_at91sam9g46() (at91_soc_initdata.subtype == AT91_SOC_SAM9G46) -#define cpu_is_at91sam9m11() (at91_soc_initdata.subtype == AT91_SOC_SAM9M11) -#define cpu_is_at91sam9x5() (at91_soc_initdata.type == AT91_SOC_SAM9X5) -#define cpu_is_at91sam9g15() (at91_soc_initdata.subtype == AT91_SOC_SAM9G15) -#define cpu_is_at91sam9g35() (at91_soc_initdata.subtype == AT91_SOC_SAM9G35) -#define cpu_is_at91sam9x35() (at91_soc_initdata.subtype == AT91_SOC_SAM9X35) -#define cpu_is_at91sam9g25() (at91_soc_initdata.subtype == AT91_SOC_SAM9G25) -#define cpu_is_at91sam9x25() (at91_soc_initdata.subtype == AT91_SOC_SAM9X25) -#define cpu_is_at91sam9n12() (at91_soc_initdata.type == AT91_SOC_SAM9N12) -#else -#define cpu_is_at91sam9xe() (0) -#define cpu_is_at91sam9260() (0) -#define cpu_is_at91sam9g20() (0) -#define cpu_is_at91sam9261() (0) -#define cpu_is_at91sam9g10() (0) -#define cpu_is_at91sam9263() (0) -#define cpu_is_at91sam9rl() (0) -#define cpu_is_at91sam9g45() (0) -#define cpu_is_at91sam9g45es() (0) -#define cpu_is_at91sam9m10() (0) -#define cpu_is_at91sam9g46() (0) -#define cpu_is_at91sam9m11() (0) -#define cpu_is_at91sam9x5() (0) -#define cpu_is_at91sam9g15() (0) -#define cpu_is_at91sam9g35() (0) -#define cpu_is_at91sam9x35() (0) -#define cpu_is_at91sam9g25() (0) -#define cpu_is_at91sam9x25() (0) -#define cpu_is_at91sam9n12() (0) -#endif - -#ifdef CONFIG_SOC_SAMA5D3 -#define cpu_is_sama5d3() (at91_soc_initdata.type == AT91_SOC_SAMA5D3) -#else -#define cpu_is_sama5d3() (0) -#endif - -#ifdef CONFIG_SOC_SAMA5D4 -#define cpu_is_sama5d4() (at91_soc_initdata.type == AT91_SOC_SAMA5D4) -#else -#define cpu_is_sama5d4() (0) -#endif - -/* - * Since this is ARM, we will never run on any AVR32 CPU. But these - * definitions may reduce clutter in common drivers. - */ -#define cpu_is_at32ap7000() (0) -#endif /* __ASSEMBLY__ */ - -#endif /* __MACH_CPU_H__ */ diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h deleted file mode 100644 index cacbaa52418f..000000000000 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/hardware.h - * - * Copyright (C) 2003 SAN People - * Copyright (C) 2003 ATMEL - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <asm/sizes.h> - -/* DBGU base */ -/* rm9200, 9260/9g20, 9261/9g10, 9rl */ -#define AT91_BASE_DBGU0 0xfffff200 -/* 9263, 9g45, sama5d3 */ -#define AT91_BASE_DBGU1 0xffffee00 -/* sama5d4 */ -#define AT91_BASE_DBGU2 0xfc069000 - -#include <mach/at91rm9200.h> -#include <mach/at91sam9260.h> -#include <mach/at91sam9261.h> -#include <mach/at91sam9263.h> -#include <mach/at91sam9rl.h> -#include <mach/at91sam9g45.h> -#include <mach/at91sam9x5.h> -#include <mach/at91sam9n12.h> -#include <mach/sama5d3.h> -#include <mach/sama5d4.h> - -/* - * On all at91 except rm9200 and x40 have the System Controller starts - * at address 0xffffc000 and has a size of 16KiB. - * - * On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting - * at 0xfffff000 - * - * Removes the individual definitions of AT91_BASE_SYS and - * replaces them with a common version at base 0xfffffc000 and size 16KiB - * and map the same memory space - */ -#define AT91_BASE_SYS 0xffffc000 - -/* - * On sama5d4 there is no system controller, we map some needed peripherals - */ -#define AT91_ALT_BASE_SYS 0xfc069000 - -/* - * On all at91 have the Advanced Interrupt Controller starts at address - * 0xfffff000 and the Power Management Controller starts at 0xfffffc00 - */ -#define AT91_AIC 0xfffff000 -#define AT91_PMC 0xfffffc00 - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ - -#ifdef CONFIG_MMU -/* - * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF - * to 0xFEF78000 .. 0xFF000000. (544Kb) - */ -#define AT91_IO_PHYS_BASE 0xFFF78000 -#define AT91_IO_VIRT_BASE IOMEM(0xFF000000 - AT91_IO_SIZE) - -/* - * On sama5d4, remap the peripherals from address 0xFC069000 .. 0xFC06F000 - * to 0xFB069000 .. 0xFB06F000. (24Kb) - */ -#define AT91_ALT_IO_PHYS_BASE AT91_ALT_BASE_SYS -#define AT91_ALT_IO_VIRT_BASE IOMEM(0xFB069000) -#else -/* - * Identity mapping for the non MMU case. - */ -#define AT91_IO_PHYS_BASE AT91_BASE_SYS -#define AT91_IO_VIRT_BASE IOMEM(AT91_IO_PHYS_BASE) - -#define AT91_ALT_IO_PHYS_BASE AT91_ALT_BASE_SYS -#define AT91_ALT_IO_VIRT_BASE IOMEM(AT91_ALT_BASE_SYS) -#endif - -#define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1) - - /* Convert a physical IO address to virtual IO address */ -#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE) -#define AT91_ALT_IO_P2V(x) ((x) - AT91_ALT_IO_PHYS_BASE + AT91_ALT_IO_VIRT_BASE) - -/* - * Virtual to Physical Address mapping for IO devices. - */ -#define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS) -#define AT91_ALT_VA_BASE_SYS AT91_ALT_IO_P2V(AT91_ALT_BASE_SYS) - - /* Internal SRAM is mapped below the IO devices */ -#define AT91_SRAM_MAX SZ_1M -#define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX) - -/* External Memory Map */ -#define AT91_CHIPSELECT_0 0x10000000 -#define AT91_CHIPSELECT_1 0x20000000 -#define AT91_CHIPSELECT_2 0x30000000 -#define AT91_CHIPSELECT_3 0x40000000 -#define AT91_CHIPSELECT_4 0x50000000 -#define AT91_CHIPSELECT_5 0x60000000 -#define AT91_CHIPSELECT_6 0x70000000 -#define AT91_CHIPSELECT_7 0x80000000 - -/* Clocks */ -#define AT91_SLOW_CLOCK 32768 /* slow clock */ - -/* - * FIXME: this is needed to communicate between the pinctrl driver and - * the PM implementation in the machine. Possibly part of the PM - * implementation should be moved down into the pinctrl driver and get - * called as part of the generic suspend/resume path. - */ -#ifndef __ASSEMBLY__ -extern void at91_pinctrl_gpio_suspend(void); -extern void at91_pinctrl_gpio_resume(void); -#endif - -#endif diff --git a/arch/arm/mach-at91/include/mach/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h deleted file mode 100644 index 25613d8c6dcd..000000000000 --- a/arch/arm/mach-at91/include/mach/sama5d3.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Chip-specific header file for the SAMA5D3 family - * - * Copyright (C) 2013 Atmel, - * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> - * - * Common definitions. - * Based on SAMA5D3 datasheet. - * - * Licensed under GPLv2 or later. - */ - -#ifndef SAMA5D3_H -#define SAMA5D3_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ -#define SAMA5D3_ID_DBGU 2 /* debug Unit (usually no special interrupt line) */ -#define AT91_ID_PIT 3 /* PIT */ -#define SAMA5D3_ID_WDT 4 /* Watchdog Timer Interrupt */ -#define SAMA5D3_ID_HSMC 5 /* Static Memory Controller */ -#define SAMA5D3_ID_PIOA 6 /* PIOA */ -#define SAMA5D3_ID_PIOB 7 /* PIOB */ -#define SAMA5D3_ID_PIOC 8 /* PIOC */ -#define SAMA5D3_ID_PIOD 9 /* PIOD */ -#define SAMA5D3_ID_PIOE 10 /* PIOE */ -#define SAMA5D3_ID_SMD 11 /* SMD Soft Modem */ -#define SAMA5D3_ID_USART0 12 /* USART0 */ -#define SAMA5D3_ID_USART1 13 /* USART1 */ -#define SAMA5D3_ID_USART2 14 /* USART2 */ -#define SAMA5D3_ID_USART3 15 /* USART3 */ -#define SAMA5D3_ID_UART0 16 /* UART 0 */ -#define SAMA5D3_ID_UART1 17 /* UART 1 */ -#define SAMA5D3_ID_TWI0 18 /* Two-Wire Interface 0 */ -#define SAMA5D3_ID_TWI1 19 /* Two-Wire Interface 1 */ -#define SAMA5D3_ID_TWI2 20 /* Two-Wire Interface 2 */ -#define SAMA5D3_ID_HSMCI0 21 /* MCI */ -#define SAMA5D3_ID_HSMCI1 22 /* MCI */ -#define SAMA5D3_ID_HSMCI2 23 /* MCI */ -#define SAMA5D3_ID_SPI0 24 /* Serial Peripheral Interface 0 */ -#define SAMA5D3_ID_SPI1 25 /* Serial Peripheral Interface 1 */ -#define SAMA5D3_ID_TC0 26 /* Timer Counter 0 */ -#define SAMA5D3_ID_TC1 27 /* Timer Counter 2 */ -#define SAMA5D3_ID_PWM 28 /* Pulse Width Modulation Controller */ -#define SAMA5D3_ID_ADC 29 /* Touch Screen ADC Controller */ -#define SAMA5D3_ID_DMA0 30 /* DMA Controller 0 */ -#define SAMA5D3_ID_DMA1 31 /* DMA Controller 1 */ -#define SAMA5D3_ID_UHPHS 32 /* USB Host High Speed */ -#define SAMA5D3_ID_UDPHS 33 /* USB Device High Speed */ -#define SAMA5D3_ID_GMAC 34 /* Gigabit Ethernet MAC */ -#define SAMA5D3_ID_EMAC 35 /* Ethernet MAC */ -#define SAMA5D3_ID_LCDC 36 /* LCD Controller */ -#define SAMA5D3_ID_ISI 37 /* Image Sensor Interface */ -#define SAMA5D3_ID_SSC0 38 /* Synchronous Serial Controller 0 */ -#define SAMA5D3_ID_SSC1 39 /* Synchronous Serial Controller 1 */ -#define SAMA5D3_ID_CAN0 40 /* CAN Controller 0 */ -#define SAMA5D3_ID_CAN1 41 /* CAN Controller 1 */ -#define SAMA5D3_ID_SHA 42 /* Secure Hash Algorithm */ -#define SAMA5D3_ID_AES 43 /* Advanced Encryption Standard */ -#define SAMA5D3_ID_TDES 44 /* Triple Data Encryption Standard */ -#define SAMA5D3_ID_TRNG 45 /* True Random Generator Number */ -#define SAMA5D3_ID_IRQ0 47 /* Advanced Interrupt Controller (IRQ0) */ - -/* - * User Peripheral physical base addresses. - */ -#define SAMA5D3_BASE_USART0 0xf001c000 -#define SAMA5D3_BASE_USART1 0xf0020000 -#define SAMA5D3_BASE_USART2 0xf8020000 -#define SAMA5D3_BASE_USART3 0xf8024000 - -/* - * System Peripherals - */ -#define SAMA5D3_BASE_RTC 0xfffffeb0 - -/* - * Internal Memory - */ -#define SAMA5D3_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define SAMA5D3_SRAM_SIZE (128 * SZ_1K) /* Internal SRAM size (128Kb) */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/sama5d4.h b/arch/arm/mach-at91/include/mach/sama5d4.h deleted file mode 100644 index f256a45d9854..000000000000 --- a/arch/arm/mach-at91/include/mach/sama5d4.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Chip-specific header file for the SAMA5D4 family - * - * Copyright (C) 2013 Atmel Corporation, - * Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Common definitions. - * Based on SAMA5D4 datasheet. - * - * Licensed under GPLv2 or later. - */ - -#ifndef SAMA5D4_H -#define SAMA5D4_H - -/* - * User Peripheral physical base addresses. - */ -#define SAMA5D4_BASE_USART3 0xfc00c000 /* (USART3 non-secure) Base Address */ -#define SAMA5D4_BASE_PMC 0xf0018000 /* (PMC) Base Address */ -#define SAMA5D4_BASE_MPDDRC 0xf0010000 /* (MPDDRC) Base Address */ -#define SAMA5D4_BASE_PIOD 0xfc068000 /* (PIOD) Base Address */ - -/* Some other peripherals */ -#define SAMA5D4_BASE_SYS2 SAMA5D4_BASE_PIOD - -/* - * Internal Memory. - */ -#define SAMA5D4_NS_SRAM_BASE 0x00210000 /* Internal SRAM base address Non-Secure */ -#define SAMA5D4_NS_SRAM_SIZE (64 * SZ_1K) /* Internal SRAM size Non-Secure part (64Kb) */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h deleted file mode 100644 index 4ebb609369e3..000000000000 --- a/arch/arm/mach-at91/include/mach/uncompress.h +++ /dev/null @@ -1,218 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/uncompress.h - * - * Copyright (C) 2003 SAN People - * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <linux/io.h> -#include <linux/atmel_serial.h> -#include <mach/hardware.h> - -#include <mach/at91_dbgu.h> -#include <mach/cpu.h> - -void __iomem *at91_uart; - -static const u32 uarts_rm9200[] = { - AT91_BASE_DBGU0, - AT91RM9200_BASE_US0, - AT91RM9200_BASE_US1, - AT91RM9200_BASE_US2, - AT91RM9200_BASE_US3, - 0, -}; - -static const u32 uarts_sam9260[] = { - AT91_BASE_DBGU0, - AT91SAM9260_BASE_US0, - AT91SAM9260_BASE_US1, - AT91SAM9260_BASE_US2, - AT91SAM9260_BASE_US3, - AT91SAM9260_BASE_US4, - AT91SAM9260_BASE_US5, - 0, -}; - -static const u32 uarts_sam9261[] = { - AT91_BASE_DBGU0, - AT91SAM9261_BASE_US0, - AT91SAM9261_BASE_US1, - AT91SAM9261_BASE_US2, - 0, -}; - -static const u32 uarts_sam9263[] = { - AT91_BASE_DBGU1, - AT91SAM9263_BASE_US0, - AT91SAM9263_BASE_US1, - AT91SAM9263_BASE_US2, - 0, -}; - -static const u32 uarts_sam9g45[] = { - AT91_BASE_DBGU1, - AT91SAM9G45_BASE_US0, - AT91SAM9G45_BASE_US1, - AT91SAM9G45_BASE_US2, - AT91SAM9G45_BASE_US3, - 0, -}; - -static const u32 uarts_sam9rl[] = { - AT91_BASE_DBGU0, - AT91SAM9RL_BASE_US0, - AT91SAM9RL_BASE_US1, - AT91SAM9RL_BASE_US2, - AT91SAM9RL_BASE_US3, - 0, -}; - -static const u32 uarts_sam9x5[] = { - AT91_BASE_DBGU0, - AT91SAM9X5_BASE_USART0, - AT91SAM9X5_BASE_USART1, - AT91SAM9X5_BASE_USART2, - 0, -}; - -static const u32 uarts_sama5d3[] = { - AT91_BASE_DBGU1, - SAMA5D3_BASE_USART0, - SAMA5D3_BASE_USART1, - SAMA5D3_BASE_USART2, - SAMA5D3_BASE_USART3, - 0, -}; - -static const u32 uarts_sama5d4[] = { - AT91_BASE_DBGU2, - SAMA5D4_BASE_USART3, - 0, -}; - -static inline const u32* decomp_soc_detect(void __iomem *dbgu_base) -{ - u32 cidr, socid; - - cidr = __raw_readl(dbgu_base + AT91_DBGU_CIDR); - socid = cidr & ~AT91_CIDR_VERSION; - - switch (socid) { - case ARCH_ID_AT91RM9200: - return uarts_rm9200; - - case ARCH_ID_AT91SAM9G20: - case ARCH_ID_AT91SAM9260: - return uarts_sam9260; - - case ARCH_ID_AT91SAM9261: - return uarts_sam9261; - - case ARCH_ID_AT91SAM9263: - return uarts_sam9263; - - case ARCH_ID_AT91SAM9G45: - return uarts_sam9g45; - - case ARCH_ID_AT91SAM9RL64: - return uarts_sam9rl; - - case ARCH_ID_AT91SAM9N12: - case ARCH_ID_AT91SAM9X5: - return uarts_sam9x5; - - case ARCH_ID_SAMA5: - cidr = __raw_readl(dbgu_base + AT91_DBGU_EXID); - if (cidr & ARCH_EXID_SAMA5D3) - return uarts_sama5d3; - else if (cidr & ARCH_EXID_SAMA5D4) - return uarts_sama5d4; - - break; - } - - /* at91sam9g10 */ - if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { - return uarts_sam9261; - } - /* at91sam9xe */ - else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) { - return uarts_sam9260; - } - - return NULL; -} - -static inline void arch_decomp_setup(void) -{ - int i = 0; - const u32* usarts; - - usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU0); - if (!usarts) - usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU1); - if (!usarts) - usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU2); - if (!usarts) { - at91_uart = NULL; - return; - } - - do { - /* physical address */ - at91_uart = (void __iomem *)usarts[i]; - - if (__raw_readl(at91_uart + ATMEL_US_BRGR)) - return; - i++; - } while (usarts[i]); - - at91_uart = NULL; -} - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ -static void putc(int c) -{ - if (!at91_uart) - return; - - while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXRDY)) - barrier(); - __raw_writel(c, at91_uart + ATMEL_US_THR); -} - -static inline void flush(void) -{ - if (!at91_uart) - return; - - /* wait for transmission to complete */ - while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXEMPTY)) - barrier(); -} - -#endif diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 5e34fb143309..5062699cbb12 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -29,19 +29,26 @@ #include <linux/atomic.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> - -#include <mach/cpu.h> -#include <mach/hardware.h> +#include <asm/fncpy.h> +#include <asm/cacheflush.h> #include "generic.h" #include "pm.h" +/* + * FIXME: this is needed to communicate between the pinctrl driver and + * the PM implementation in the machine. Possibly part of the PM + * implementation should be moved down into the pinctrl driver and get + * called as part of the generic suspend/resume path. + */ +extern void at91_pinctrl_gpio_suspend(void); +extern void at91_pinctrl_gpio_resume(void); + static struct { unsigned long uhp_udp_mask; int memctrl; } at91_pm_data; -static void (*at91_pm_standby)(void); void __iomem *at91_ramc_base[2]; static int at91_pm_valid_state(suspend_state_t state) @@ -119,76 +126,67 @@ int at91_suspend_entering_slow_clock(void) } EXPORT_SYMBOL(at91_suspend_entering_slow_clock); - -static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0, +static void (*at91_suspend_sram_fn)(void __iomem *pmc, void __iomem *ramc0, void __iomem *ramc1, int memctrl); -#ifdef CONFIG_AT91_SLOW_CLOCK -extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0, +extern void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *ramc0, void __iomem *ramc1, int memctrl); -extern u32 at91_slow_clock_sz; -#endif +extern u32 at91_pm_suspend_in_sram_sz; + +static void at91_pm_suspend(suspend_state_t state) +{ + unsigned int pm_data = at91_pm_data.memctrl; + + pm_data |= (state == PM_SUSPEND_MEM) ? + AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0; + + flush_cache_all(); + outer_disable(); + + at91_suspend_sram_fn(at91_pmc_base, at91_ramc_base[0], + at91_ramc_base[1], pm_data); + + outer_resume(); +} static int at91_pm_enter(suspend_state_t state) { at91_pinctrl_gpio_suspend(); switch (state) { + /* + * Suspend-to-RAM is like STANDBY plus slow clock mode, so + * drivers must suspend more deeply, the master clock switches + * to the clk32k and turns off the main oscillator + */ + case PM_SUSPEND_MEM: /* - * Suspend-to-RAM is like STANDBY plus slow clock mode, so - * drivers must suspend more deeply: only the master clock - * controller may be using the main oscillator. + * Ensure that clocks are in a valid state. */ - case PM_SUSPEND_MEM: - /* - * Ensure that clocks are in a valid state. - */ - if (!at91_pm_verify_clocks()) - goto error; - - /* - * Enter slow clock mode by switching over to clk32k and - * turning off the main oscillator; reverse on wakeup. - */ - if (slow_clock) { -#ifdef CONFIG_AT91_SLOW_CLOCK - /* copy slow_clock handler to SRAM, and call it */ - memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz); -#endif - slow_clock(at91_pmc_base, at91_ramc_base[0], - at91_ramc_base[1], - at91_pm_data.memctrl); - break; - } else { - pr_info("AT91: PM - no slow clock mode enabled ...\n"); - /* FALLTHROUGH leaving master clock alone */ - } + if (!at91_pm_verify_clocks()) + goto error; - /* - * STANDBY mode has *all* drivers suspended; ignores irqs not - * marked as 'wakeup' event sources; and reduces DRAM power. - * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and - * nothing fancy done with main or cpu clocks. - */ - case PM_SUSPEND_STANDBY: - /* - * NOTE: the Wait-for-Interrupt instruction needs to be - * in icache so no SDRAM accesses are needed until the - * wakeup IRQ occurs and self-refresh is terminated. - * For ARM 926 based chips, this requirement is weaker - * as at91sam9 can access a RAM in self-refresh mode. - */ - if (at91_pm_standby) - at91_pm_standby(); - break; + at91_pm_suspend(state); - case PM_SUSPEND_ON: - cpu_do_idle(); - break; + break; - default: - pr_debug("AT91: PM - bogus suspend state %d\n", state); - goto error; + /* + * STANDBY mode has *all* drivers suspended; ignores irqs not + * marked as 'wakeup' event sources; and reduces DRAM power. + * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and + * nothing fancy done with main or cpu clocks. + */ + case PM_SUSPEND_STANDBY: + at91_pm_suspend(state); + break; + + case PM_SUSPEND_ON: + cpu_do_idle(); + break; + + default: + pr_debug("AT91: PM - bogus suspend state %d\n", state); + goto error; } error: @@ -218,12 +216,99 @@ static struct platform_device at91_cpuidle_device = { .name = "cpuidle-at91", }; -void at91_pm_set_standby(void (*at91_standby)(void)) +static void at91_pm_set_standby(void (*at91_standby)(void)) { - if (at91_standby) { + if (at91_standby) at91_cpuidle_device.dev.platform_data = at91_standby; - at91_pm_standby = at91_standby; +} + +/* + * The AT91RM9200 goes into self-refresh mode with this command, and will + * terminate self-refresh automatically on the next SDRAM access. + * + * Self-refresh mode is exited as soon as a memory access is made, but we don't + * know for sure when that happens. However, we need to restore the low-power + * mode if it was enabled before going idle. Restoring low-power mode while + * still in self-refresh is "not recommended", but seems to work. + */ +static void at91rm9200_standby(void) +{ + u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR); + + asm volatile( + "b 1f\n\t" + ".align 5\n\t" + "1: mcr p15, 0, %0, c7, c10, 4\n\t" + " str %0, [%1, %2]\n\t" + " str %3, [%1, %4]\n\t" + " mcr p15, 0, %0, c7, c0, 4\n\t" + " str %5, [%1, %2]" + : + : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR), + "r" (1), "r" (AT91RM9200_SDRAMC_SRR), + "r" (lpr)); +} + +/* We manage both DDRAM/SDRAM controllers, we need more than one value to + * remember. + */ +static void at91_ddr_standby(void) +{ + /* Those two values allow us to delay self-refresh activation + * to the maximum. */ + u32 lpr0, lpr1 = 0; + u32 saved_lpr0, saved_lpr1 = 0; + + if (at91_ramc_base[1]) { + saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR); + lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB; + lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; } + + saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR); + lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB; + lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; + + /* self-refresh mode now */ + at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0); + if (at91_ramc_base[1]) + at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1); + + cpu_do_idle(); + + at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); + if (at91_ramc_base[1]) + at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); +} + +/* We manage both DDRAM/SDRAM controllers, we need more than one value to + * remember. + */ +static void at91sam9_sdram_standby(void) +{ + u32 lpr0, lpr1 = 0; + u32 saved_lpr0, saved_lpr1 = 0; + + if (at91_ramc_base[1]) { + saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR); + lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB; + lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH; + } + + saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR); + lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB; + lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH; + + /* self-refresh mode now */ + at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0); + if (at91_ramc_base[1]) + at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1); + + cpu_do_idle(); + + at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0); + if (at91_ramc_base[1]) + at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1); } static const struct of_device_id ramc_ids[] __initconst = { @@ -263,60 +348,63 @@ static __init void at91_dt_ramc(void) at91_pm_set_standby(standby); } -#ifdef CONFIG_AT91_SLOW_CLOCK static void __init at91_pm_sram_init(void) { struct gen_pool *sram_pool; phys_addr_t sram_pbase; unsigned long sram_base; struct device_node *node; - struct platform_device *pdev; + struct platform_device *pdev = NULL; - node = of_find_compatible_node(NULL, NULL, "mmio-sram"); - if (!node) { - pr_warn("%s: failed to find sram node!\n", __func__); - return; + for_each_compatible_node(node, NULL, "mmio-sram") { + pdev = of_find_device_by_node(node); + if (pdev) { + of_node_put(node); + break; + } } - pdev = of_find_device_by_node(node); if (!pdev) { pr_warn("%s: failed to find sram device!\n", __func__); - goto put_node; + return; } sram_pool = dev_get_gen_pool(&pdev->dev); if (!sram_pool) { pr_warn("%s: sram pool unavailable!\n", __func__); - goto put_node; + return; } - sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz); + sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz); if (!sram_base) { - pr_warn("%s: unable to alloc ocram!\n", __func__); - goto put_node; + pr_warn("%s: unable to alloc sram!\n", __func__); + return; } sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base); - slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false); + at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase, + at91_pm_suspend_in_sram_sz, false); + if (!at91_suspend_sram_fn) { + pr_warn("SRAM: Could not map\n"); + return; + } -put_node: - of_node_put(node); + /* Copy the pm suspend handler to SRAM */ + at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn, + &at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz); } -#endif - static void __init at91_pm_init(void) { -#ifdef CONFIG_AT91_SLOW_CLOCK at91_pm_sram_init(); -#endif - - pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : "")); if (at91_cpuidle_device.dev.platform_data) platform_device_register(&at91_cpuidle_device); - suspend_set_ops(&at91_pm_ops); + if (at91_suspend_sram_fn) + suspend_set_ops(&at91_pm_ops); + else + pr_info("AT91: PM not supported, due to no SRAM allocated\n"); } void __init at91rm9200_pm_init(void) diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index d2c89963af2d..ecd875a91d52 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -15,100 +15,16 @@ #include <mach/at91_ramc.h> -#ifdef CONFIG_PM -extern void at91_pm_set_standby(void (*at91_standby)(void)); -#else -static inline void at91_pm_set_standby(void (*at91_standby)(void)) { } -#endif - -/* - * The AT91RM9200 goes into self-refresh mode with this command, and will - * terminate self-refresh automatically on the next SDRAM access. - * - * Self-refresh mode is exited as soon as a memory access is made, but we don't - * know for sure when that happens. However, we need to restore the low-power - * mode if it was enabled before going idle. Restoring low-power mode while - * still in self-refresh is "not recommended", but seems to work. - */ - -static inline void at91rm9200_standby(void) -{ - u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR); - - asm volatile( - "b 1f\n\t" - ".align 5\n\t" - "1: mcr p15, 0, %0, c7, c10, 4\n\t" - " str %0, [%1, %2]\n\t" - " str %3, [%1, %4]\n\t" - " mcr p15, 0, %0, c7, c0, 4\n\t" - " str %5, [%1, %2]" - : - : "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR), - "r" (1), "r" (AT91RM9200_SDRAMC_SRR), - "r" (lpr)); -} - -/* We manage both DDRAM/SDRAM controllers, we need more than one value to - * remember. - */ -static inline void at91_ddr_standby(void) -{ - /* Those two values allow us to delay self-refresh activation - * to the maximum. */ - u32 lpr0, lpr1 = 0; - u32 saved_lpr0, saved_lpr1 = 0; - - if (at91_ramc_base[1]) { - saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR); - lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB; - lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; - } - - saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR); - lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB; - lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; - - /* self-refresh mode now */ - at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0); - if (at91_ramc_base[1]) - at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1); - - cpu_do_idle(); - - at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); - if (at91_ramc_base[1]) - at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); -} - -/* We manage both DDRAM/SDRAM controllers, we need more than one value to - * remember. - */ -static inline void at91sam9_sdram_standby(void) -{ - u32 lpr0, lpr1 = 0; - u32 saved_lpr0, saved_lpr1 = 0; - - if (at91_ramc_base[1]) { - saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR); - lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB; - lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH; - } - - saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR); - lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB; - lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH; +#define AT91_MEMCTRL_MC 0 +#define AT91_MEMCTRL_SDRAMC 1 +#define AT91_MEMCTRL_DDRSDR 2 - /* self-refresh mode now */ - at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0); - if (at91_ramc_base[1]) - at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1); +#define AT91_PM_MEMTYPE_MASK 0x0f - cpu_do_idle(); +#define AT91_PM_MODE_OFFSET 4 +#define AT91_PM_MODE_MASK 0x01 +#define AT91_PM_MODE(x) (((x) & AT91_PM_MODE_MASK) << AT91_PM_MODE_OFFSET) - at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0); - if (at91_ramc_base[1]) - at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1); -} +#define AT91_PM_SLOW_CLOCK 0x01 #endif diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S deleted file mode 100644 index 556151e85ec4..000000000000 --- a/arch/arm/mach-at91/pm_slowclock.S +++ /dev/null @@ -1,323 +0,0 @@ -/* - * arch/arm/mach-at91/pm_slow_clock.S - * - * Copyright (C) 2006 Savin Zlobec - * - * AT91SAM9 support: - * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/linkage.h> -#include <linux/clk/at91_pmc.h> -#include <mach/hardware.h> -#include <mach/at91_ramc.h> - -/* - * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master - * clock during suspend by adjusting its prescalar and divisor. - * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there - * are errata regarding adjusting the prescalar and divisor. - */ -#undef SLOWDOWN_MASTER_CLOCK - -#define MCKRDY_TIMEOUT 1000 -#define MOSCRDY_TIMEOUT 1000 -#define PLLALOCK_TIMEOUT 1000 -#define PLLBLOCK_TIMEOUT 1000 - -pmc .req r0 -sdramc .req r1 -ramc1 .req r2 -memctrl .req r3 -tmp1 .req r4 -tmp2 .req r5 - -/* - * Wait until master clock is ready (after switching master clock source) - */ - .macro wait_mckrdy - mov tmp2, #MCKRDY_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_MCKRDY - beq 1b -2: - .endm - -/* - * Wait until master oscillator has stabilized. - */ - .macro wait_moscrdy - mov tmp2, #MOSCRDY_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_MOSCS - beq 1b -2: - .endm - -/* - * Wait until PLLA has locked. - */ - .macro wait_pllalock - mov tmp2, #PLLALOCK_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_LOCKA - beq 1b -2: - .endm - -/* - * Wait until PLLB has locked. - */ - .macro wait_pllblock - mov tmp2, #PLLBLOCK_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_LOCKB - beq 1b -2: - .endm - - .text - -/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc, - * void __iomem *ramc1, int memctrl) - */ -ENTRY(at91_slow_clock) - /* Save registers on stack */ - stmfd sp!, {r4 - r12, lr} - - /* - * Register usage: - * R0 = Base address of AT91_PMC - * R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS) - * R2 = Base address of second RAM Controller or 0 if not present - * R3 = Memory controller - * R4 = temporary register - * R5 = temporary register - */ - - /* Drain write buffer */ - mov tmp1, #0 - mcr p15, 0, tmp1, c7, c10, 4 - - cmp memctrl, #AT91_MEMCTRL_MC - bne ddr_sr_enable - - /* - * at91rm9200 Memory controller - */ - /* Put SDRAM in self-refresh mode */ - mov tmp1, #1 - str tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR] - b sdr_sr_done - - /* - * DDRSDR Memory controller - */ -ddr_sr_enable: - cmp memctrl, #AT91_MEMCTRL_DDRSDR - bne sdr_sr_enable - - /* prepare for DDRAM self-refresh mode */ - ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR] - str tmp1, .saved_sam9_lpr - bic tmp1, #AT91_DDRSDRC_LPCB - orr tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH - - /* figure out if we use the second ram controller */ - cmp ramc1, #0 - ldrne tmp2, [ramc1, #AT91_DDRSDRC_LPR] - strne tmp2, .saved_sam9_lpr1 - bicne tmp2, #AT91_DDRSDRC_LPCB - orrne tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH - - /* Enable DDRAM self-refresh mode */ - str tmp1, [sdramc, #AT91_DDRSDRC_LPR] - strne tmp2, [ramc1, #AT91_DDRSDRC_LPR] - - b sdr_sr_done - - /* - * SDRAMC Memory controller - */ -sdr_sr_enable: - /* Enable SDRAM self-refresh mode */ - ldr tmp1, [sdramc, #AT91_SDRAMC_LPR] - str tmp1, .saved_sam9_lpr - - bic tmp1, #AT91_SDRAMC_LPCB - orr tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH - str tmp1, [sdramc, #AT91_SDRAMC_LPR] - -sdr_sr_done: - /* Save Master clock setting */ - ldr tmp1, [pmc, #AT91_PMC_MCKR] - str tmp1, .saved_mckr - - /* - * Set the Master clock source to slow clock - */ - bic tmp1, tmp1, #AT91_PMC_CSS - str tmp1, [pmc, #AT91_PMC_MCKR] - - wait_mckrdy - -#ifdef SLOWDOWN_MASTER_CLOCK - /* - * Set the Master Clock PRES and MDIV fields. - * - * See AT91RM9200 errata #27 and #28 for details. - */ - mov tmp1, #0 - str tmp1, [pmc, #AT91_PMC_MCKR] - - wait_mckrdy -#endif - - /* Save PLLA setting and disable it */ - ldr tmp1, [pmc, #AT91_CKGR_PLLAR] - str tmp1, .saved_pllar - - mov tmp1, #AT91_PMC_PLLCOUNT - orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */ - str tmp1, [pmc, #AT91_CKGR_PLLAR] - - /* Save PLLB setting and disable it */ - ldr tmp1, [pmc, #AT91_CKGR_PLLBR] - str tmp1, .saved_pllbr - - mov tmp1, #AT91_PMC_PLLCOUNT - str tmp1, [pmc, #AT91_CKGR_PLLBR] - - /* Turn off the main oscillator */ - ldr tmp1, [pmc, #AT91_CKGR_MOR] - bic tmp1, tmp1, #AT91_PMC_MOSCEN - str tmp1, [pmc, #AT91_CKGR_MOR] - - /* Wait for interrupt */ - mcr p15, 0, tmp1, c7, c0, 4 - - /* Turn on the main oscillator */ - ldr tmp1, [pmc, #AT91_CKGR_MOR] - orr tmp1, tmp1, #AT91_PMC_MOSCEN - str tmp1, [pmc, #AT91_CKGR_MOR] - - wait_moscrdy - - /* Restore PLLB setting */ - ldr tmp1, .saved_pllbr - str tmp1, [pmc, #AT91_CKGR_PLLBR] - - tst tmp1, #(AT91_PMC_MUL & 0xff0000) - bne 1f - tst tmp1, #(AT91_PMC_MUL & ~0xff0000) - beq 2f -1: - wait_pllblock -2: - - /* Restore PLLA setting */ - ldr tmp1, .saved_pllar - str tmp1, [pmc, #AT91_CKGR_PLLAR] - - tst tmp1, #(AT91_PMC_MUL & 0xff0000) - bne 3f - tst tmp1, #(AT91_PMC_MUL & ~0xff0000) - beq 4f -3: - wait_pllalock -4: - -#ifdef SLOWDOWN_MASTER_CLOCK - /* - * First set PRES if it was not 0, - * than set CSS and MDIV fields. - * - * See AT91RM9200 errata #27 and #28 for details. - */ - ldr tmp1, .saved_mckr - tst tmp1, #AT91_PMC_PRES - beq 2f - and tmp1, tmp1, #AT91_PMC_PRES - str tmp1, [pmc, #AT91_PMC_MCKR] - - wait_mckrdy -#endif - - /* - * Restore master clock setting - */ -2: ldr tmp1, .saved_mckr - str tmp1, [pmc, #AT91_PMC_MCKR] - - wait_mckrdy - - /* - * at91rm9200 Memory controller - * Do nothing - self-refresh is automatically disabled. - */ - cmp memctrl, #AT91_MEMCTRL_MC - beq ram_restored - - /* - * DDRSDR Memory controller - */ - cmp memctrl, #AT91_MEMCTRL_DDRSDR - bne sdr_en_restore - /* Restore LPR on AT91 with DDRAM */ - ldr tmp1, .saved_sam9_lpr - str tmp1, [sdramc, #AT91_DDRSDRC_LPR] - - /* if we use the second ram controller */ - cmp ramc1, #0 - ldrne tmp2, .saved_sam9_lpr1 - strne tmp2, [ramc1, #AT91_DDRSDRC_LPR] - - b ram_restored - - /* - * SDRAMC Memory controller - */ -sdr_en_restore: - /* Restore LPR on AT91 with SDRAM */ - ldr tmp1, .saved_sam9_lpr - str tmp1, [sdramc, #AT91_SDRAMC_LPR] - -ram_restored: - /* Restore registers, and return */ - ldmfd sp!, {r4 - r12, pc} - - -.saved_mckr: - .word 0 - -.saved_pllar: - .word 0 - -.saved_pllbr: - .word 0 - -.saved_sam9_lpr: - .word 0 - -.saved_sam9_lpr1: - .word 0 - -ENTRY(at91_slow_clock_sz) - .word .-at91_slow_clock diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S new file mode 100644 index 000000000000..bd22b2c8a051 --- /dev/null +++ b/arch/arm/mach-at91/pm_suspend.S @@ -0,0 +1,337 @@ +/* + * arch/arm/mach-at91/pm_slow_clock.S + * + * Copyright (C) 2006 Savin Zlobec + * + * AT91SAM9 support: + * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/linkage.h> +#include <linux/clk/at91_pmc.h> +#include <mach/at91_ramc.h> +#include "pm.h" + +#define SRAMC_SELF_FRESH_ACTIVE 0x01 +#define SRAMC_SELF_FRESH_EXIT 0x00 + +pmc .req r0 +tmp1 .req r4 +tmp2 .req r5 + +/* + * Wait until master clock is ready (after switching master clock source) + */ + .macro wait_mckrdy +1: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_MCKRDY + beq 1b + .endm + +/* + * Wait until master oscillator has stabilized. + */ + .macro wait_moscrdy +1: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_MOSCS + beq 1b + .endm + +/* + * Wait until PLLA has locked. + */ + .macro wait_pllalock +1: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_LOCKA + beq 1b + .endm + +/* + * Put the processor to enter the idle state + */ + .macro at91_cpu_idle + +#if defined(CONFIG_CPU_V7) + mov tmp1, #AT91_PMC_PCK + str tmp1, [pmc, #AT91_PMC_SCDR] + + dsb + + wfi @ Wait For Interrupt +#else + mcr p15, 0, tmp1, c7, c0, 4 +#endif + + .endm + + .text + + .arm + +/* + * void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *sdramc, + * void __iomem *ramc1, int memctrl) + * @input param: + * @r0: base address of AT91_PMC + * @r1: base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS) + * @r2: base address of second SDRAM Controller or 0 if not present + * @r3: pm information + */ +ENTRY(at91_pm_suspend_in_sram) + /* Save registers on stack */ + stmfd sp!, {r4 - r12, lr} + + /* Drain write buffer */ + mov tmp1, #0 + mcr p15, 0, tmp1, c7, c10, 4 + + str r0, .pmc_base + str r1, .sramc_base + str r2, .sramc1_base + + and r0, r3, #AT91_PM_MEMTYPE_MASK + str r0, .memtype + + lsr r0, r3, #AT91_PM_MODE_OFFSET + and r0, r0, #AT91_PM_MODE_MASK + str r0, .pm_mode + + /* Active the self-refresh mode */ + mov r0, #SRAMC_SELF_FRESH_ACTIVE + bl at91_sramc_self_refresh + + ldr r0, .pm_mode + tst r0, #AT91_PM_SLOW_CLOCK + beq skip_disable_main_clock + + ldr pmc, .pmc_base + + /* Save Master clock setting */ + ldr tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, .saved_mckr + + /* + * Set the Master clock source to slow clock + */ + bic tmp1, tmp1, #AT91_PMC_CSS + str tmp1, [pmc, #AT91_PMC_MCKR] + + wait_mckrdy + + /* Save PLLA setting and disable it */ + ldr tmp1, [pmc, #AT91_CKGR_PLLAR] + str tmp1, .saved_pllar + + mov tmp1, #AT91_PMC_PLLCOUNT + orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */ + str tmp1, [pmc, #AT91_CKGR_PLLAR] + + /* Turn off the main oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + bic tmp1, tmp1, #AT91_PMC_MOSCEN + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + +skip_disable_main_clock: + ldr pmc, .pmc_base + + /* Wait for interrupt */ + at91_cpu_idle + + ldr r0, .pm_mode + tst r0, #AT91_PM_SLOW_CLOCK + beq skip_enable_main_clock + + ldr pmc, .pmc_base + + /* Turn on the main oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + orr tmp1, tmp1, #AT91_PMC_MOSCEN + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + wait_moscrdy + + /* Restore PLLA setting */ + ldr tmp1, .saved_pllar + str tmp1, [pmc, #AT91_CKGR_PLLAR] + + tst tmp1, #(AT91_PMC_MUL & 0xff0000) + bne 3f + tst tmp1, #(AT91_PMC_MUL & ~0xff0000) + beq 4f +3: + wait_pllalock +4: + + /* + * Restore master clock setting + */ + ldr tmp1, .saved_mckr + str tmp1, [pmc, #AT91_PMC_MCKR] + + wait_mckrdy + +skip_enable_main_clock: + /* Exit the self-refresh mode */ + mov r0, #SRAMC_SELF_FRESH_EXIT + bl at91_sramc_self_refresh + + /* Restore registers, and return */ + ldmfd sp!, {r4 - r12, pc} +ENDPROC(at91_pm_suspend_in_sram) + +/* + * void at91_sramc_self_refresh(unsigned int is_active) + * + * @input param: + * @r0: 1 - active self-refresh mode + * 0 - exit self-refresh mode + * register usage: + * @r1: memory type + * @r2: base address of the sram controller + */ + +ENTRY(at91_sramc_self_refresh) + ldr r1, .memtype + ldr r2, .sramc_base + + cmp r1, #AT91_MEMCTRL_MC + bne ddrc_sf + + /* + * at91rm9200 Memory controller + */ + + /* + * For exiting the self-refresh mode, do nothing, + * automatically exit the self-refresh mode. + */ + tst r0, #SRAMC_SELF_FRESH_ACTIVE + beq exit_sramc_sf + + /* Active SDRAM self-refresh mode */ + mov r3, #1 + str r3, [r2, #AT91RM9200_SDRAMC_SRR] + b exit_sramc_sf + +ddrc_sf: + cmp r1, #AT91_MEMCTRL_DDRSDR + bne sdramc_sf + + /* + * DDR Memory controller + */ + tst r0, #SRAMC_SELF_FRESH_ACTIVE + beq ddrc_exit_sf + + /* LPDDR1 --> force DDR2 mode during self-refresh */ + ldr r3, [r2, #AT91_DDRSDRC_MDR] + str r3, .saved_sam9_mdr + bic r3, r3, #~AT91_DDRSDRC_MD + cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR + ldreq r3, [r2, #AT91_DDRSDRC_MDR] + biceq r3, r3, #AT91_DDRSDRC_MD + orreq r3, r3, #AT91_DDRSDRC_MD_DDR2 + streq r3, [r2, #AT91_DDRSDRC_MDR] + + /* Active DDRC self-refresh mode */ + ldr r3, [r2, #AT91_DDRSDRC_LPR] + str r3, .saved_sam9_lpr + bic r3, r3, #AT91_DDRSDRC_LPCB + orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH + str r3, [r2, #AT91_DDRSDRC_LPR] + + /* If using the 2nd ddr controller */ + ldr r2, .sramc1_base + cmp r2, #0 + beq no_2nd_ddrc + + ldr r3, [r2, #AT91_DDRSDRC_MDR] + str r3, .saved_sam9_mdr1 + bic r3, r3, #~AT91_DDRSDRC_MD + cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR + ldreq r3, [r2, #AT91_DDRSDRC_MDR] + biceq r3, r3, #AT91_DDRSDRC_MD + orreq r3, r3, #AT91_DDRSDRC_MD_DDR2 + streq r3, [r2, #AT91_DDRSDRC_MDR] + + /* Active DDRC self-refresh mode */ + ldr r3, [r2, #AT91_DDRSDRC_LPR] + str r3, .saved_sam9_lpr1 + bic r3, r3, #AT91_DDRSDRC_LPCB + orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH + str r3, [r2, #AT91_DDRSDRC_LPR] + +no_2nd_ddrc: + b exit_sramc_sf + +ddrc_exit_sf: + /* Restore MDR in case of LPDDR1 */ + ldr r3, .saved_sam9_mdr + str r3, [r2, #AT91_DDRSDRC_MDR] + /* Restore LPR on AT91 with DDRAM */ + ldr r3, .saved_sam9_lpr + str r3, [r2, #AT91_DDRSDRC_LPR] + + /* If using the 2nd ddr controller */ + ldr r2, .sramc1_base + cmp r2, #0 + ldrne r3, .saved_sam9_mdr1 + strne r3, [r2, #AT91_DDRSDRC_MDR] + ldrne r3, .saved_sam9_lpr1 + strne r3, [r2, #AT91_DDRSDRC_LPR] + + b exit_sramc_sf + + /* + * SDRAMC Memory controller + */ +sdramc_sf: + tst r0, #SRAMC_SELF_FRESH_ACTIVE + beq sdramc_exit_sf + + /* Active SDRAMC self-refresh mode */ + ldr r3, [r2, #AT91_SDRAMC_LPR] + str r3, .saved_sam9_lpr + bic r3, r3, #AT91_SDRAMC_LPCB + orr r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH + str r3, [r2, #AT91_SDRAMC_LPR] + +sdramc_exit_sf: + ldr r3, .saved_sam9_lpr + str r3, [r2, #AT91_SDRAMC_LPR] + +exit_sramc_sf: + mov pc, lr +ENDPROC(at91_sramc_self_refresh) + +.pmc_base: + .word 0 +.sramc_base: + .word 0 +.sramc1_base: + .word 0 +.memtype: + .word 0 +.pm_mode: + .word 0 +.saved_mckr: + .word 0 +.saved_pllar: + .word 0 +.saved_sam9_lpr: + .word 0 +.saved_sam9_lpr1: + .word 0 +.saved_sam9_mdr: + .word 0 +.saved_sam9_mdr1: + .word 0 + +ENTRY(at91_pm_suspend_in_sram_sz) + .word .-at91_pm_suspend_in_sram diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c index 03dcb441f3d2..41d829d8e7d5 100644 --- a/arch/arm/mach-at91/sama5.c +++ b/arch/arm/mach-at91/sama5.c @@ -7,48 +7,48 @@ * Licensed under GPLv2 or later. */ -#include <linux/types.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/gpio.h> -#include <linux/micrel_phy.h> #include <linux/of.h> -#include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/phy.h> -#include <linux/clk-provider.h> -#include <linux/phy.h> -#include <mach/hardware.h> - -#include <asm/setup.h> -#include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/mach/irq.h> +#include <asm/system_misc.h> #include "generic.h" +#include "soc.h" -static int ksz8081_phy_fixup(struct phy_device *phy) -{ - int value; - - value = phy_read(phy, 0x16); - value &= ~0x20; - phy_write(phy, 0x16, value); - - return 0; -} +static const struct at91_soc sama5_socs[] = { + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH, + "sama5d31", "sama5d3"), + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH, + "sama5d33", "sama5d3"), + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH, + "sama5d34", "sama5d3"), + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH, + "sama5d35", "sama5d3"), + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH, + "sama5d36", "sama5d3"), + AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH, + "sama5d41", "sama5d4"), + AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH, + "sama5d42", "sama5d4"), + AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH, + "sama5d43", "sama5d4"), + AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH, + "sama5d44", "sama5d4"), + { /* sentinel */ }, +}; static void __init sama5_dt_device_init(void) { - if (of_machine_is_compatible("atmel,sama5d4ek") && - IS_ENABLED(CONFIG_PHYLIB)) { - phy_register_fixup_for_id("fc028000.etherne:00", - ksz8081_phy_fixup); - } + struct soc_device *soc; + struct device *soc_dev = NULL; - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + soc = at91_soc_init(sama5_socs); + if (soc != NULL) + soc_dev = soc_device_to_device(soc); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); at91sam9x5_pm_init(); } @@ -59,44 +59,10 @@ static const char *sama5_dt_board_compat[] __initconst = { DT_MACHINE_START(sama5_dt, "Atmel SAMA5") /* Maintainer: Atmel */ - .map_io = at91_map_io, .init_machine = sama5_dt_device_init, .dt_compat = sama5_dt_board_compat, MACHINE_END -static struct map_desc at91_io_desc[] __initdata = { - { - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC), - .pfn = __phys_to_pfn(SAMA5D4_BASE_MPDDRC), - .length = SZ_512, - .type = MT_DEVICE, - }, - { - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC), - .pfn = __phys_to_pfn(SAMA5D4_BASE_PMC), - .length = SZ_512, - .type = MT_DEVICE, - }, - { /* On sama5d4, we use USART3 as serial console */ - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3), - .pfn = __phys_to_pfn(SAMA5D4_BASE_USART3), - .length = SZ_256, - .type = MT_DEVICE, - }, - { /* A bunch of peripheral with fine grained IO space */ - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2), - .pfn = __phys_to_pfn(SAMA5D4_BASE_SYS2), - .length = SZ_2K, - .type = MT_DEVICE, - }, -}; - -static void __init sama5_alt_map_io(void) -{ - at91_alt_map_io(); - iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc)); -} - static const char *sama5_alt_dt_board_compat[] __initconst = { "atmel,sama5d4", NULL @@ -104,7 +70,6 @@ static const char *sama5_alt_dt_board_compat[] __initconst = { DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5") /* Maintainer: Atmel */ - .map_io = sama5_alt_map_io, .init_machine = sama5_dt_device_init, .dt_compat = sama5_alt_dt_board_compat, .l2c_aux_mask = ~0UL, diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c deleted file mode 100644 index 4e58bc90ed21..000000000000 --- a/arch/arm/mach-at91/setup.c +++ /dev/null @@ -1,330 +0,0 @@ -/* - * Copyright (C) 2007 Atmel Corporation. - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Under GPLv2 - */ - -#define pr_fmt(fmt) "AT91: " fmt - -#include <linux/module.h> -#include <linux/io.h> -#include <linux/mm.h> -#include <linux/pm.h> -#include <linux/of_address.h> -#include <linux/pinctrl/machine.h> -#include <linux/clk/at91_pmc.h> - -#include <asm/system_misc.h> -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/cpu.h> -#include <mach/at91_dbgu.h> - -#include "generic.h" -#include "pm.h" - -struct at91_socinfo at91_soc_initdata; -EXPORT_SYMBOL(at91_soc_initdata); - -static struct map_desc at91_io_desc __initdata __maybe_unused = { - .virtual = (unsigned long)AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, -}; - -static struct map_desc at91_alt_io_desc __initdata __maybe_unused = { - .virtual = (unsigned long)AT91_ALT_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_ALT_BASE_SYS), - .length = 24 * SZ_1K, - .type = MT_DEVICE, -}; - -static void __init soc_detect(u32 dbgu_base) -{ - u32 cidr, socid; - - cidr = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_CIDR); - socid = cidr & ~AT91_CIDR_VERSION; - - switch (socid) { - case ARCH_ID_AT91RM9200: - at91_soc_initdata.type = AT91_SOC_RM9200; - if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN) - at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; - break; - - case ARCH_ID_AT91SAM9260: - at91_soc_initdata.type = AT91_SOC_SAM9260; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9261: - at91_soc_initdata.type = AT91_SOC_SAM9261; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9263: - at91_soc_initdata.type = AT91_SOC_SAM9263; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9G20: - at91_soc_initdata.type = AT91_SOC_SAM9G20; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9G45: - at91_soc_initdata.type = AT91_SOC_SAM9G45; - if (cidr == ARCH_ID_AT91SAM9G45ES) - at91_soc_initdata.subtype = AT91_SOC_SAM9G45ES; - break; - - case ARCH_ID_AT91SAM9RL64: - at91_soc_initdata.type = AT91_SOC_SAM9RL; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9X5: - at91_soc_initdata.type = AT91_SOC_SAM9X5; - break; - - case ARCH_ID_AT91SAM9N12: - at91_soc_initdata.type = AT91_SOC_SAM9N12; - break; - - case ARCH_ID_SAMA5: - at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID); - if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) { - at91_soc_initdata.type = AT91_SOC_SAMA5D3; - } - break; - } - - /* at91sam9g10 */ - if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { - at91_soc_initdata.type = AT91_SOC_SAM9G10; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - } - /* at91sam9xe */ - else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) { - at91_soc_initdata.type = AT91_SOC_SAM9260; - at91_soc_initdata.subtype = AT91_SOC_SAM9XE; - } - - if (!at91_soc_is_detected()) - return; - - at91_soc_initdata.cidr = cidr; - - /* sub version of soc */ - if (!at91_soc_initdata.exid) - at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID); - - if (at91_soc_initdata.type == AT91_SOC_SAM9G45) { - switch (at91_soc_initdata.exid) { - case ARCH_EXID_AT91SAM9M10: - at91_soc_initdata.subtype = AT91_SOC_SAM9M10; - break; - case ARCH_EXID_AT91SAM9G46: - at91_soc_initdata.subtype = AT91_SOC_SAM9G46; - break; - case ARCH_EXID_AT91SAM9M11: - at91_soc_initdata.subtype = AT91_SOC_SAM9M11; - break; - } - } - - if (at91_soc_initdata.type == AT91_SOC_SAM9X5) { - switch (at91_soc_initdata.exid) { - case ARCH_EXID_AT91SAM9G15: - at91_soc_initdata.subtype = AT91_SOC_SAM9G15; - break; - case ARCH_EXID_AT91SAM9G35: - at91_soc_initdata.subtype = AT91_SOC_SAM9G35; - break; - case ARCH_EXID_AT91SAM9X35: - at91_soc_initdata.subtype = AT91_SOC_SAM9X35; - break; - case ARCH_EXID_AT91SAM9G25: - at91_soc_initdata.subtype = AT91_SOC_SAM9G25; - break; - case ARCH_EXID_AT91SAM9X25: - at91_soc_initdata.subtype = AT91_SOC_SAM9X25; - break; - } - } - - if (at91_soc_initdata.type == AT91_SOC_SAMA5D3) { - switch (at91_soc_initdata.exid) { - case ARCH_EXID_SAMA5D31: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D31; - break; - case ARCH_EXID_SAMA5D33: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D33; - break; - case ARCH_EXID_SAMA5D34: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D34; - break; - case ARCH_EXID_SAMA5D35: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D35; - break; - case ARCH_EXID_SAMA5D36: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D36; - break; - } - } -} - -static void __init alt_soc_detect(u32 dbgu_base) -{ - u32 cidr, socid; - - /* SoC ID */ - cidr = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_CIDR); - socid = cidr & ~AT91_CIDR_VERSION; - - switch (socid) { - case ARCH_ID_SAMA5: - at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID); - if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) { - at91_soc_initdata.type = AT91_SOC_SAMA5D3; - } else if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D4) { - at91_soc_initdata.type = AT91_SOC_SAMA5D4; - } - break; - } - - if (!at91_soc_is_detected()) - return; - - at91_soc_initdata.cidr = cidr; - - /* sub version of soc */ - if (!at91_soc_initdata.exid) - at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID); - - if (at91_soc_initdata.type == AT91_SOC_SAMA5D4) { - switch (at91_soc_initdata.exid) { - case ARCH_EXID_SAMA5D41: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D41; - break; - case ARCH_EXID_SAMA5D42: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D42; - break; - case ARCH_EXID_SAMA5D43: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D43; - break; - case ARCH_EXID_SAMA5D44: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D44; - break; - } - } -} - -static const char *soc_name[] = { - [AT91_SOC_RM9200] = "at91rm9200", - [AT91_SOC_SAM9260] = "at91sam9260", - [AT91_SOC_SAM9261] = "at91sam9261", - [AT91_SOC_SAM9263] = "at91sam9263", - [AT91_SOC_SAM9G10] = "at91sam9g10", - [AT91_SOC_SAM9G20] = "at91sam9g20", - [AT91_SOC_SAM9G45] = "at91sam9g45", - [AT91_SOC_SAM9RL] = "at91sam9rl", - [AT91_SOC_SAM9X5] = "at91sam9x5", - [AT91_SOC_SAM9N12] = "at91sam9n12", - [AT91_SOC_SAMA5D3] = "sama5d3", - [AT91_SOC_SAMA5D4] = "sama5d4", - [AT91_SOC_UNKNOWN] = "Unknown", -}; - -const char *at91_get_soc_type(struct at91_socinfo *c) -{ - return soc_name[c->type]; -} -EXPORT_SYMBOL(at91_get_soc_type); - -static const char *soc_subtype_name[] = { - [AT91_SOC_RM9200_BGA] = "at91rm9200 BGA", - [AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP", - [AT91_SOC_SAM9XE] = "at91sam9xe", - [AT91_SOC_SAM9G45ES] = "at91sam9g45es", - [AT91_SOC_SAM9M10] = "at91sam9m10", - [AT91_SOC_SAM9G46] = "at91sam9g46", - [AT91_SOC_SAM9M11] = "at91sam9m11", - [AT91_SOC_SAM9G15] = "at91sam9g15", - [AT91_SOC_SAM9G35] = "at91sam9g35", - [AT91_SOC_SAM9X35] = "at91sam9x35", - [AT91_SOC_SAM9G25] = "at91sam9g25", - [AT91_SOC_SAM9X25] = "at91sam9x25", - [AT91_SOC_SAMA5D31] = "sama5d31", - [AT91_SOC_SAMA5D33] = "sama5d33", - [AT91_SOC_SAMA5D34] = "sama5d34", - [AT91_SOC_SAMA5D35] = "sama5d35", - [AT91_SOC_SAMA5D36] = "sama5d36", - [AT91_SOC_SAMA5D41] = "sama5d41", - [AT91_SOC_SAMA5D42] = "sama5d42", - [AT91_SOC_SAMA5D43] = "sama5d43", - [AT91_SOC_SAMA5D44] = "sama5d44", - [AT91_SOC_SUBTYPE_NONE] = "None", - [AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown", -}; - -const char *at91_get_soc_subtype(struct at91_socinfo *c) -{ - return soc_subtype_name[c->subtype]; -} -EXPORT_SYMBOL(at91_get_soc_subtype); - -void __init at91_map_io(void) -{ - /* Map peripherals */ - iotable_init(&at91_io_desc, 1); - - at91_soc_initdata.type = AT91_SOC_UNKNOWN; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN; - - soc_detect(AT91_BASE_DBGU0); - if (!at91_soc_is_detected()) - soc_detect(AT91_BASE_DBGU1); - - if (!at91_soc_is_detected()) - panic(pr_fmt("Impossible to detect the SOC type")); - - pr_info("Detected soc type: %s\n", - at91_get_soc_type(&at91_soc_initdata)); - if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) - pr_info("Detected soc subtype: %s\n", - at91_get_soc_subtype(&at91_soc_initdata)); -} - -void __init at91_alt_map_io(void) -{ - /* Map peripherals */ - iotable_init(&at91_alt_io_desc, 1); - - at91_soc_initdata.type = AT91_SOC_UNKNOWN; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN; - - alt_soc_detect(AT91_BASE_DBGU2); - if (!at91_soc_is_detected()) - panic("AT91: Impossible to detect the SOC type"); - - pr_info("AT91: Detected soc type: %s\n", - at91_get_soc_type(&at91_soc_initdata)); - if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) - pr_info("AT91: Detected soc subtype: %s\n", - at91_get_soc_subtype(&at91_soc_initdata)); -} - -void __iomem *at91_matrix_base; -EXPORT_SYMBOL_GPL(at91_matrix_base); - -void __init at91_ioremap_matrix(u32 base_addr) -{ - at91_matrix_base = ioremap(base_addr, 512); - if (!at91_matrix_base) - panic(pr_fmt("Impossible to ioremap at91_matrix_base\n")); -} diff --git a/arch/arm/mach-at91/soc.c b/arch/arm/mach-at91/soc.c new file mode 100644 index 000000000000..54343ffa3e53 --- /dev/null +++ b/arch/arm/mach-at91/soc.c @@ -0,0 +1,97 @@ +/* + * Copyright (C) 2015 Atmel + * + * Alexandre Belloni <alexandre.belloni@free-electrons.com + * Boris Brezillon <boris.brezillon@free-electrons.com + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + */ + +#define pr_fmt(fmt) "AT91: " fmt + +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> + +#include "soc.h" + +#define AT91_DBGU_CIDR 0x40 +#define AT91_DBGU_CIDR_VERSION(x) ((x) & 0x1f) +#define AT91_DBGU_CIDR_EXT BIT(31) +#define AT91_DBGU_CIDR_MATCH_MASK 0x7fffffe0 +#define AT91_DBGU_EXID 0x44 + +struct soc_device * __init at91_soc_init(const struct at91_soc *socs) +{ + struct soc_device_attribute *soc_dev_attr; + const struct at91_soc *soc; + struct soc_device *soc_dev; + struct device_node *np; + void __iomem *regs; + u32 cidr, exid; + + np = of_find_compatible_node(NULL, NULL, "atmel,at91rm9200-dbgu"); + if (!np) + np = of_find_compatible_node(NULL, NULL, + "atmel,at91sam9260-dbgu"); + + if (!np) { + pr_warn("Could not find DBGU node"); + return NULL; + } + + regs = of_iomap(np, 0); + of_node_put(np); + + if (!regs) { + pr_warn("Could not map DBGU iomem range"); + return NULL; + } + + cidr = readl(regs + AT91_DBGU_CIDR); + exid = readl(regs + AT91_DBGU_EXID); + + iounmap(regs); + + for (soc = socs; soc->name; soc++) { + if (soc->cidr_match != (cidr & AT91_DBGU_CIDR_MATCH_MASK)) + continue; + + if (!(cidr & AT91_DBGU_CIDR_EXT) || soc->exid_match == exid) + break; + } + + if (!soc->name) { + pr_warn("Could not find matching SoC description\n"); + return NULL; + } + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return NULL; + + soc_dev_attr->family = soc->family; + soc_dev_attr->soc_id = soc->name; + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X", + AT91_DBGU_CIDR_VERSION(cidr)); + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr); + pr_warn("Could not register SoC device\n"); + return NULL; + } + + if (soc->family) + pr_info("Detected SoC family: %s\n", soc->family); + pr_info("Detected SoC: %s, revision %X\n", soc->name, + AT91_DBGU_CIDR_VERSION(cidr)); + + return soc_dev; +} diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h new file mode 100644 index 000000000000..be23c400596b --- /dev/null +++ b/arch/arm/mach-at91/soc.h @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2015 Atmel + * + * Boris Brezillon <boris.brezillon@free-electrons.com + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + */ + +#ifndef __AT91_SOC_H +#define __AT91_SOC_H + +#include <linux/sys_soc.h> + +struct at91_soc { + u32 cidr_match; + u32 exid_match; + const char *name; + const char *family; +}; + +#define AT91_SOC(__cidr, __exid, __name, __family) \ + { \ + .cidr_match = (__cidr), \ + .exid_match = (__exid), \ + .name = (__name), \ + .family = (__family), \ + } + +struct soc_device * __init +at91_soc_init(const struct at91_soc *socs); + +#define AT91RM9200_CIDR_MATCH 0x09290780 + +#define AT91SAM9260_CIDR_MATCH 0x019803a0 +#define AT91SAM9261_CIDR_MATCH 0x019703a0 +#define AT91SAM9263_CIDR_MATCH 0x019607a0 +#define AT91SAM9G20_CIDR_MATCH 0x019905a0 +#define AT91SAM9RL64_CIDR_MATCH 0x019b03a0 +#define AT91SAM9G45_CIDR_MATCH 0x019b05a0 +#define AT91SAM9X5_CIDR_MATCH 0x019a05a0 +#define AT91SAM9N12_CIDR_MATCH 0x019a07a0 + +#define AT91SAM9M11_EXID_MATCH 0x00000001 +#define AT91SAM9M10_EXID_MATCH 0x00000002 +#define AT91SAM9G46_EXID_MATCH 0x00000003 +#define AT91SAM9G45_EXID_MATCH 0x00000004 + +#define AT91SAM9G15_EXID_MATCH 0x00000000 +#define AT91SAM9G35_EXID_MATCH 0x00000001 +#define AT91SAM9X35_EXID_MATCH 0x00000002 +#define AT91SAM9G25_EXID_MATCH 0x00000003 +#define AT91SAM9X25_EXID_MATCH 0x00000004 + +#define AT91SAM9CN12_EXID_MATCH 0x00000005 +#define AT91SAM9N12_EXID_MATCH 0x00000006 +#define AT91SAM9CN11_EXID_MATCH 0x00000009 + +#define AT91SAM9XE128_CIDR_MATCH 0x329973a0 +#define AT91SAM9XE256_CIDR_MATCH 0x329a93a0 +#define AT91SAM9XE512_CIDR_MATCH 0x329aa3a0 + +#define SAMA5D3_CIDR_MATCH 0x0a5c07c0 +#define SAMA5D31_EXID_MATCH 0x00444300 +#define SAMA5D33_EXID_MATCH 0x00414300 +#define SAMA5D34_EXID_MATCH 0x00414301 +#define SAMA5D35_EXID_MATCH 0x00584300 +#define SAMA5D36_EXID_MATCH 0x00004301 + +#define SAMA5D4_CIDR_MATCH 0x0a5c07c0 +#define SAMA5D41_EXID_MATCH 0x00000001 +#define SAMA5D42_EXID_MATCH 0x00000002 +#define SAMA5D43_EXID_MATCH 0x00000003 +#define SAMA5D44_EXID_MATCH 0x00000004 + +#endif /* __AT91_SOC_H */ diff --git a/arch/arm/mach-bcm/bcm_cygnus.c b/arch/arm/mach-bcm/bcm_cygnus.c index 30dc58be51b8..7ae894c7849b 100644 --- a/arch/arm/mach-bcm/bcm_cygnus.c +++ b/arch/arm/mach-bcm/bcm_cygnus.c @@ -13,7 +13,7 @@ #include <asm/mach/arch.h> -static const char const *bcm_cygnus_dt_compat[] = { +static const char * const bcm_cygnus_dt_compat[] __initconst = { "brcm,cygnus", NULL, }; diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c index fb38c726e987..f46b78dd6136 100644 --- a/arch/arm/mach-cns3xxx/pm.c +++ b/arch/arm/mach-cns3xxx/pm.c @@ -73,7 +73,6 @@ static void cns3xxx_pwr_soft_rst_force(unsigned int block) __raw_writel(reg, PM_SOFT_RST_REG); } -EXPORT_SYMBOL(cns3xxx_pwr_soft_rst_force); void cns3xxx_pwr_soft_rst(unsigned int block) { diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index cd30f6f5f2ff..dd8f5312b2c0 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -200,17 +200,6 @@ config DA850_UI_SD_VIDEO_PORT endchoice -config DA850_WL12XX - bool "AM18x wl1271 daughter board" - depends on MACH_DAVINCI_DA850_EVM - help - The wl1271 daughter card for AM18x EVMs is a combo wireless - connectivity add-on card, based on the LS Research TiWi module with - Texas Instruments' wl1271 solution. - Say Y if you want to use a wl1271 expansion card connected to the - AM18x EVM. - - config MACH_MITYOMAPL138 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" depends on ARCH_DAVINCI_DA850 diff --git a/arch/arm/mach-davinci/asp.h b/arch/arm/mach-davinci/asp.h index d9b2acd12393..1128e1d8e4b4 100644 --- a/arch/arm/mach-davinci/asp.h +++ b/arch/arm/mach-davinci/asp.h @@ -21,6 +21,9 @@ /* Bases of da830 McASP1 register banks */ #define DAVINCI_DA830_MCASP1_REG_BASE 0x01D04000 +/* Bases of da830 McASP2 register banks */ +#define DAVINCI_DA830_MCASP2_REG_BASE 0x01D08000 + /* EDMA channels of dm644x and dm355 */ #define DAVINCI_DMA_ASP0_TX 2 #define DAVINCI_DMA_ASP0_RX 3 @@ -40,6 +43,10 @@ #define DAVINCI_DA830_DMA_MCASP1_AREVT 2 #define DAVINCI_DA830_DMA_MCASP1_AXEVT 3 +/* EDMA channels of da830 McASP2 */ +#define DAVINCI_DA830_DMA_MCASP2_AREVT 4 +#define DAVINCI_DA830_DMA_MCASP2_AXEVT 5 + /* Interrupts */ #define DAVINCI_ASP0_RX_INT IRQ_MBRINT #define DAVINCI_ASP0_TX_INT IRQ_MBXINT diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 6b5a97da9fe3..1ed545cc2b83 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -38,7 +38,6 @@ #include <linux/regulator/fixed.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#include <linux/wl12xx.h> #include <mach/common.h> #include <mach/cp_intc.h> @@ -60,9 +59,6 @@ #define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0) #define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1) -#define DA850_WLAN_EN GPIO_TO_PIN(6, 9) -#define DA850_WLAN_IRQ GPIO_TO_PIN(6, 10) - #define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6) static struct mtd_partition da850evm_spiflash_part[] = { @@ -1343,109 +1339,6 @@ static __init void da850_vpif_init(void) static __init void da850_vpif_init(void) {} #endif -#ifdef CONFIG_DA850_WL12XX - -static void wl12xx_set_power(int index, bool power_on) -{ - static bool power_state; - - pr_debug("Powering %s wl12xx", power_on ? "on" : "off"); - - if (power_on == power_state) - return; - power_state = power_on; - - if (power_on) { - /* Power up sequence required for wl127x devices */ - gpio_set_value(DA850_WLAN_EN, 1); - usleep_range(15000, 15000); - gpio_set_value(DA850_WLAN_EN, 0); - usleep_range(1000, 1000); - gpio_set_value(DA850_WLAN_EN, 1); - msleep(70); - } else { - gpio_set_value(DA850_WLAN_EN, 0); - } -} - -static struct davinci_mmc_config da850_wl12xx_mmc_config = { - .set_power = wl12xx_set_power, - .wires = 4, - .max_freq = 25000000, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE | - MMC_CAP_POWER_OFF_CARD, -}; - -static const short da850_wl12xx_pins[] __initconst = { - DA850_MMCSD1_DAT_0, DA850_MMCSD1_DAT_1, DA850_MMCSD1_DAT_2, - DA850_MMCSD1_DAT_3, DA850_MMCSD1_CLK, DA850_MMCSD1_CMD, - DA850_GPIO6_9, DA850_GPIO6_10, - -1 -}; - -static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = { - .irq = -1, - .board_ref_clock = WL12XX_REFCLOCK_38, - .platform_quirks = WL12XX_PLATFORM_QUIRK_EDGE_IRQ, -}; - -static __init int da850_wl12xx_init(void) -{ - int ret; - - ret = davinci_cfg_reg_list(da850_wl12xx_pins); - if (ret) { - pr_err("wl12xx/mmc mux setup failed: %d\n", ret); - goto exit; - } - - ret = da850_register_mmcsd1(&da850_wl12xx_mmc_config); - if (ret) { - pr_err("wl12xx/mmc registration failed: %d\n", ret); - goto exit; - } - - ret = gpio_request_one(DA850_WLAN_EN, GPIOF_OUT_INIT_LOW, "wl12xx_en"); - if (ret) { - pr_err("Could not request wl12xx enable gpio: %d\n", ret); - goto exit; - } - - ret = gpio_request_one(DA850_WLAN_IRQ, GPIOF_IN, "wl12xx_irq"); - if (ret) { - pr_err("Could not request wl12xx irq gpio: %d\n", ret); - goto free_wlan_en; - } - - da850_wl12xx_wlan_data.irq = gpio_to_irq(DA850_WLAN_IRQ); - - ret = wl12xx_set_platform_data(&da850_wl12xx_wlan_data); - if (ret) { - pr_err("Could not set wl12xx data: %d\n", ret); - goto free_wlan_irq; - } - - return 0; - -free_wlan_irq: - gpio_free(DA850_WLAN_IRQ); - -free_wlan_en: - gpio_free(DA850_WLAN_EN); - -exit: - return ret; -} - -#else /* CONFIG_DA850_WL12XX */ - -static __init int da850_wl12xx_init(void) -{ - return 0; -} - -#endif /* CONFIG_DA850_WL12XX */ - #define DA850EVM_SATA_REFCLKPN_RATE (100 * 1000 * 1000) static __init void da850_evm_init(void) @@ -1502,11 +1395,6 @@ static __init void da850_evm_init(void) if (ret) pr_warn("%s: MMCSD0 registration failed: %d\n", __func__, ret); - - ret = da850_wl12xx_init(); - if (ret) - pr_warn("%s: WL12xx initialization failed: %d\n", - __func__, ret); } davinci_serial_init(da8xx_serial_device); diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index e365c1bb1265..306ebc51599a 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -17,7 +17,6 @@ #include <linux/cpuidle.h> #include <linux/io.h> #include <linux/export.h> -#include <asm/proc-fns.h> #include <asm/cpuidle.h> #include <mach/cpuidle.h> diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index b85b781b05fd..ddfdd820e6f2 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -463,16 +463,23 @@ static struct resource da830_mcasp1_resources[] = { }, /* TX event */ { + .name = "tx", .start = DAVINCI_DA830_DMA_MCASP1_AXEVT, .end = DAVINCI_DA830_DMA_MCASP1_AXEVT, .flags = IORESOURCE_DMA, }, /* RX event */ { + .name = "rx", .start = DAVINCI_DA830_DMA_MCASP1_AREVT, .end = DAVINCI_DA830_DMA_MCASP1_AREVT, .flags = IORESOURCE_DMA, }, + { + .name = "common", + .start = IRQ_DA8XX_MCASPINT, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device da830_mcasp1_device = { @@ -482,6 +489,41 @@ static struct platform_device da830_mcasp1_device = { .resource = da830_mcasp1_resources, }; +static struct resource da830_mcasp2_resources[] = { + { + .name = "mpu", + .start = DAVINCI_DA830_MCASP2_REG_BASE, + .end = DAVINCI_DA830_MCASP2_REG_BASE + (SZ_1K * 12) - 1, + .flags = IORESOURCE_MEM, + }, + /* TX event */ + { + .name = "tx", + .start = DAVINCI_DA830_DMA_MCASP2_AXEVT, + .end = DAVINCI_DA830_DMA_MCASP2_AXEVT, + .flags = IORESOURCE_DMA, + }, + /* RX event */ + { + .name = "rx", + .start = DAVINCI_DA830_DMA_MCASP2_AREVT, + .end = DAVINCI_DA830_DMA_MCASP2_AREVT, + .flags = IORESOURCE_DMA, + }, + { + .name = "common", + .start = IRQ_DA8XX_MCASPINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da830_mcasp2_device = { + .name = "davinci-mcasp", + .id = 2, + .num_resources = ARRAY_SIZE(da830_mcasp2_resources), + .resource = da830_mcasp2_resources, +}; + static struct resource da850_mcasp_resources[] = { { .name = "mpu", @@ -491,16 +533,23 @@ static struct resource da850_mcasp_resources[] = { }, /* TX event */ { + .name = "tx", .start = DAVINCI_DA8XX_DMA_MCASP0_AXEVT, .end = DAVINCI_DA8XX_DMA_MCASP0_AXEVT, .flags = IORESOURCE_DMA, }, /* RX event */ { + .name = "rx", .start = DAVINCI_DA8XX_DMA_MCASP0_AREVT, .end = DAVINCI_DA8XX_DMA_MCASP0_AREVT, .flags = IORESOURCE_DMA, }, + { + .name = "common", + .start = IRQ_DA8XX_MCASPINT, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device da850_mcasp_device = { @@ -512,14 +561,31 @@ static struct platform_device da850_mcasp_device = { void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata) { - /* DA830/OMAP-L137 has 3 instances of McASP */ - if (cpu_is_davinci_da830() && id == 1) { - da830_mcasp1_device.dev.platform_data = pdata; - platform_device_register(&da830_mcasp1_device); - } else if (cpu_is_davinci_da850()) { - da850_mcasp_device.dev.platform_data = pdata; - platform_device_register(&da850_mcasp_device); + struct platform_device *pdev; + + switch (id) { + case 0: + /* Valid for DA830/OMAP-L137 or DA850/OMAP-L138 */ + pdev = &da850_mcasp_device; + break; + case 1: + /* Valid for DA830/OMAP-L137 only */ + if (!cpu_is_davinci_da830()) + return; + pdev = &da830_mcasp1_device; + break; + case 2: + /* Valid for DA830/OMAP-L137 only */ + if (!cpu_is_davinci_da830()) + return; + pdev = &da830_mcasp2_device; + break; + default: + return; } + + pdev->dev.platform_data = pdata; + platform_device_register(pdev); } static struct resource da8xx_pruss_resources[] = { diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 6c3bbea7d77d..3f842bb266d6 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -493,7 +493,6 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_DM646X_EMACMISCINT] = 7, [IRQ_DM646X_MCASP0TXINT] = 7, [IRQ_DM646X_MCASP0RXINT] = 7, - [IRQ_AEMIFINT] = 7, [IRQ_DM646X_RESERVED_3] = 7, [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ [IRQ_TINT0_TINT34] = 7, /* clocksource */ @@ -610,19 +609,31 @@ static struct resource dm646x_mcasp0_resources[] = { .end = DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1, .flags = IORESOURCE_MEM, }, - /* first TX, then RX */ { + .name = "tx", .start = DAVINCI_DM646X_DMA_MCASP0_AXEVT0, .end = DAVINCI_DM646X_DMA_MCASP0_AXEVT0, .flags = IORESOURCE_DMA, }, { + .name = "rx", .start = DAVINCI_DM646X_DMA_MCASP0_AREVT0, .end = DAVINCI_DM646X_DMA_MCASP0_AREVT0, .flags = IORESOURCE_DMA, }, + { + .name = "tx", + .start = IRQ_DM646X_MCASP0TXINT, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = IRQ_DM646X_MCASP0RXINT, + .flags = IORESOURCE_IRQ, + }, }; +/* DIT mode only, rx is not supported */ static struct resource dm646x_mcasp1_resources[] = { { .name = "mpu", @@ -630,17 +641,16 @@ static struct resource dm646x_mcasp1_resources[] = { .end = DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1, .flags = IORESOURCE_MEM, }, - /* DIT mode, only TX event */ { + .name = "tx", .start = DAVINCI_DM646X_DMA_MCASP1_AXEVT1, .end = DAVINCI_DM646X_DMA_MCASP1_AXEVT1, .flags = IORESOURCE_DMA, }, - /* DIT mode, dummy entry */ { - .start = -1, - .end = -1, - .flags = IORESOURCE_DMA, + .name = "tx", + .start = IRQ_DM646X_MCASP1TXINT, + .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index 354af71798dc..edb2ca62321a 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -129,8 +129,8 @@ #define IRQ_DM646X_EMACMISCINT 27 #define IRQ_DM646X_MCASP0TXINT 28 #define IRQ_DM646X_MCASP0RXINT 29 +#define IRQ_DM646X_MCASP1TXINT 30 #define IRQ_DM646X_RESERVED_3 31 -#define IRQ_DM646X_MCASP1TXINT 32 #define IRQ_DM646X_VLQINT 38 #define IRQ_DM646X_UARTINT2 42 #define IRQ_DM646X_SPINT0 43 diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index 8a275f297522..91fe97144570 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -155,17 +155,13 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); static struct pci_bus __init * dove_pcie_scan_bus(int nr, struct pci_sys_data *sys) { - struct pci_bus *bus; - - if (nr < num_pcie_ports) { - bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys, - &sys->resources); - } else { - bus = NULL; + if (nr >= num_pcie_ports) { BUG(); + return NULL; } - return bus; + return pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys, + &sys->resources); } static int __init dove_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 603820e5aba7..81064cd61a0a 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -123,7 +123,7 @@ config SOC_EXYNOS5800 config EXYNOS5420_MCPM bool "Exynos5420 Multi-Cluster PM support" depends on MCPM && SOC_EXYNOS5420 - select ARM_CCI + select ARM_CCI400_PORT_CTRL select ARM_CPU_SUSPEND help This is needed to provide CPU and cluster power management diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index f70eca7ee705..acd5b560b728 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -126,6 +126,12 @@ enum { void exynos_firmware_init(void); +/* CPU BOOT mode flag for Exynos3250 SoC bootloader */ +#define C2_STATE (1 << 3) + +void exynos_set_boot_flag(unsigned int cpu, unsigned int mode); +void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode); + extern u32 exynos_get_eint_wake_mask(void); #ifdef CONFIG_PM_SLEEP diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 9e9dfdfad9d7..bcde0dd668df 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -166,16 +166,14 @@ static void __init exynos_init_io(void) exynos_map_io(); } +/* + * Apparently, these SoCs are not able to wake-up from suspend using + * the PMU. Too bad. Should they suddenly become capable of such a + * feat, the matches below should be moved to suspend.c. + */ static const struct of_device_id exynos_dt_pmu_match[] = { - { .compatible = "samsung,exynos3250-pmu" }, - { .compatible = "samsung,exynos4210-pmu" }, - { .compatible = "samsung,exynos4212-pmu" }, - { .compatible = "samsung,exynos4412-pmu" }, - { .compatible = "samsung,exynos4415-pmu" }, - { .compatible = "samsung,exynos5250-pmu" }, { .compatible = "samsung,exynos5260-pmu" }, { .compatible = "samsung,exynos5410-pmu" }, - { .compatible = "samsung,exynos5420-pmu" }, { /*sentinel*/ }, }; @@ -186,9 +184,6 @@ static void exynos_map_pmu(void) np = of_find_matching_node(NULL, exynos_dt_pmu_match); if (np) pmu_base_addr = of_iomap(np, 0); - - if (!pmu_base_addr) - panic("failed to find exynos pmu register\n"); } static void __init exynos_init_irq(void) @@ -211,7 +206,7 @@ static void __init exynos_dt_machine_init(void) if (!IS_ENABLED(CONFIG_SMP)) exynos_sysram_init(); -#ifdef CONFIG_ARM_EXYNOS_CPUIDLE +#if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE) if (of_machine_is_compatible("samsung,exynos4210")) exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data; #endif @@ -219,6 +214,7 @@ static void __init exynos_dt_machine_init(void) of_machine_is_compatible("samsung,exynos4212") || (of_machine_is_compatible("samsung,exynos4412") && of_machine_is_compatible("samsung,trats2")) || + of_machine_is_compatible("samsung,exynos3250") || of_machine_is_compatible("samsung,exynos5250")) platform_device_register(&exynos_cpuidle); diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index 4791a3cc00f9..1bd35763f12e 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -48,7 +48,13 @@ static int exynos_do_idle(unsigned long mode) __raw_writel(virt_to_phys(exynos_cpu_resume_ns), sysram_ns_base_addr + 0x24); __raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20); - exynos_smc(SMC_CMD_CPU0AFTR, 0, 0, 0); + if (soc_is_exynos3250()) { + exynos_smc(SMC_CMD_SAVE, OP_TYPE_CORE, + SMC_POWERSTATE_IDLE, 0); + exynos_smc(SMC_CMD_SHUTDOWN, OP_TYPE_CLUSTER, + SMC_POWERSTATE_IDLE, 0); + } else + exynos_smc(SMC_CMD_CPU0AFTR, 0, 0, 0); break; case FW_DO_IDLE_SLEEP: exynos_smc(SMC_CMD_SLEEP, 0, 0, 0); @@ -206,3 +212,28 @@ void __init exynos_firmware_init(void) outer_cache.configure = exynos_l2_configure; } } + +#define REG_CPU_STATE_ADDR (sysram_ns_base_addr + 0x28) +#define BOOT_MODE_MASK 0x1f + +void exynos_set_boot_flag(unsigned int cpu, unsigned int mode) +{ + unsigned int tmp; + + tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4); + + if (mode & BOOT_MODE_MASK) + tmp &= ~BOOT_MODE_MASK; + + tmp |= mode; + __raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4); +} + +void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode) +{ + unsigned int tmp; + + tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4); + tmp &= ~mode; + __raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4); +} diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index b0d3c2e876fb..9bdf54795f05 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -61,25 +61,7 @@ static void __iomem *ns_sram_base_addr; : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ "r9", "r10", "lr", "memory") -/* - * We can't use regular spinlocks. In the switcher case, it is possible - * for an outbound CPU to call power_down() after its inbound counterpart - * is already live using the same logical CPU number which trips lockdep - * debugging. - */ -static arch_spinlock_t exynos_mcpm_lock = __ARCH_SPIN_LOCK_UNLOCKED; -static int -cpu_use_count[EXYNOS5420_CPUS_PER_CLUSTER][EXYNOS5420_NR_CLUSTERS]; - -#define exynos_cluster_usecnt(cluster) \ - (cpu_use_count[0][cluster] + \ - cpu_use_count[1][cluster] + \ - cpu_use_count[2][cluster] + \ - cpu_use_count[3][cluster]) - -#define exynos_cluster_unused(cluster) !exynos_cluster_usecnt(cluster) - -static int exynos_power_up(unsigned int cpu, unsigned int cluster) +static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster) { unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); @@ -88,127 +70,65 @@ static int exynos_power_up(unsigned int cpu, unsigned int cluster) cluster >= EXYNOS5420_NR_CLUSTERS) return -EINVAL; - /* - * Since this is called with IRQs enabled, and no arch_spin_lock_irq - * variant exists, we need to disable IRQs manually here. - */ - local_irq_disable(); - arch_spin_lock(&exynos_mcpm_lock); - - cpu_use_count[cpu][cluster]++; - if (cpu_use_count[cpu][cluster] == 1) { - bool was_cluster_down = - (exynos_cluster_usecnt(cluster) == 1); - - /* - * Turn on the cluster (L2/COMMON) and then power on the - * cores. - */ - if (was_cluster_down) - exynos_cluster_power_up(cluster); - - exynos_cpu_power_up(cpunr); - } else if (cpu_use_count[cpu][cluster] != 2) { - /* - * The only possible values are: - * 0 = CPU down - * 1 = CPU (still) up - * 2 = CPU requested to be up before it had a chance - * to actually make itself down. - * Any other value is a bug. - */ - BUG(); - } + exynos_cpu_power_up(cpunr); + return 0; +} - arch_spin_unlock(&exynos_mcpm_lock); - local_irq_enable(); +static int exynos_cluster_powerup(unsigned int cluster) +{ + pr_debug("%s: cluster %u\n", __func__, cluster); + if (cluster >= EXYNOS5420_NR_CLUSTERS) + return -EINVAL; + exynos_cluster_power_up(cluster); return 0; } -/* - * NOTE: This function requires the stack data to be visible through power down - * and can only be executed on processors like A15 and A7 that hit the cache - * with the C bit clear in the SCTLR register. - */ -static void exynos_power_down(void) +static void exynos_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster) { - unsigned int mpidr, cpu, cluster; - bool last_man = false, skip_wfi = false; - unsigned int cpunr; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); + unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || cluster >= EXYNOS5420_NR_CLUSTERS); + exynos_cpu_power_down(cpunr); +} - __mcpm_cpu_going_down(cpu, cluster); - - arch_spin_lock(&exynos_mcpm_lock); - BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); - cpu_use_count[cpu][cluster]--; - if (cpu_use_count[cpu][cluster] == 0) { - exynos_cpu_power_down(cpunr); - - if (exynos_cluster_unused(cluster)) { - exynos_cluster_power_down(cluster); - last_man = true; - } - } else if (cpu_use_count[cpu][cluster] == 1) { - /* - * A power_up request went ahead of us. - * Even if we do not want to shut this CPU down, - * the caller expects a certain state as if the WFI - * was aborted. So let's continue with cache cleaning. - */ - skip_wfi = true; - } else { - BUG(); - } - - if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { - arch_spin_unlock(&exynos_mcpm_lock); - - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { - /* - * On the Cortex-A15 we need to disable - * L2 prefetching before flushing the cache. - */ - asm volatile( - "mcr p15, 1, %0, c15, c0, 3\n\t" - "isb\n\t" - "dsb" - : : "r" (0x400)); - } +static void exynos_cluster_powerdown_prepare(unsigned int cluster) +{ + pr_debug("%s: cluster %u\n", __func__, cluster); + BUG_ON(cluster >= EXYNOS5420_NR_CLUSTERS); + exynos_cluster_power_down(cluster); +} - /* Flush all cache levels for this cluster. */ - exynos_v7_exit_coherency_flush(all); +static void exynos_cpu_cache_disable(void) +{ + /* Disable and flush the local CPU cache. */ + exynos_v7_exit_coherency_flush(louis); +} +static void exynos_cluster_cache_disable(void) +{ + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { /* - * Disable cluster-level coherency by masking - * incoming snoops and DVM messages: + * On the Cortex-A15 we need to disable + * L2 prefetching before flushing the cache. */ - cci_disable_port_by_cpu(mpidr); - - __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); - } else { - arch_spin_unlock(&exynos_mcpm_lock); - - /* Disable and flush the local CPU cache. */ - exynos_v7_exit_coherency_flush(louis); + asm volatile( + "mcr p15, 1, %0, c15, c0, 3\n\t" + "isb\n\t" + "dsb" + : : "r" (0x400)); } - __mcpm_cpu_down(cpu, cluster); - - /* Now we are prepared for power-down, do it: */ - if (!skip_wfi) - wfi(); + /* Flush all cache levels for this cluster. */ + exynos_v7_exit_coherency_flush(all); - /* Not dead at this point? Let our caller cope. */ + /* + * Disable cluster-level coherency by masking + * incoming snoops and DVM messages: + */ + cci_disable_port_by_cpu(read_cpuid_mpidr()); } static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster) @@ -222,10 +142,8 @@ static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster) /* Wait for the core state to be OFF */ while (tries--) { - if (ACCESS_ONCE(cpu_use_count[cpu][cluster]) == 0) { - if ((exynos_cpu_power_state(cpunr) == 0)) - return 0; /* success: the CPU is halted */ - } + if ((exynos_cpu_power_state(cpunr) == 0)) + return 0; /* success: the CPU is halted */ /* Otherwise, wait and retry: */ msleep(1); @@ -234,63 +152,23 @@ static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster) return -ETIMEDOUT; /* timeout */ } -static void exynos_powered_up(void) -{ - unsigned int mpidr, cpu, cluster; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - - arch_spin_lock(&exynos_mcpm_lock); - if (cpu_use_count[cpu][cluster] == 0) - cpu_use_count[cpu][cluster] = 1; - arch_spin_unlock(&exynos_mcpm_lock); -} - -static void exynos_suspend(u64 residency) +static void exynos_cpu_is_up(unsigned int cpu, unsigned int cluster) { - unsigned int mpidr, cpunr; - - exynos_power_down(); - - /* - * Execution reaches here only if cpu did not power down. - * Hence roll back the changes done in exynos_power_down function. - * - * CAUTION: "This function requires the stack data to be visible through - * power down and can only be executed on processors like A15 and A7 - * that hit the cache with the C bit clear in the SCTLR register." - */ - mpidr = read_cpuid_mpidr(); - cpunr = exynos_pmu_cpunr(mpidr); - - exynos_cpu_power_up(cpunr); + /* especially when resuming: make sure power control is set */ + exynos_cpu_powerup(cpu, cluster); } static const struct mcpm_platform_ops exynos_power_ops = { - .power_up = exynos_power_up, - .power_down = exynos_power_down, + .cpu_powerup = exynos_cpu_powerup, + .cluster_powerup = exynos_cluster_powerup, + .cpu_powerdown_prepare = exynos_cpu_powerdown_prepare, + .cluster_powerdown_prepare = exynos_cluster_powerdown_prepare, + .cpu_cache_disable = exynos_cpu_cache_disable, + .cluster_cache_disable = exynos_cluster_cache_disable, .wait_for_powerdown = exynos_wait_for_powerdown, - .suspend = exynos_suspend, - .powered_up = exynos_powered_up, + .cpu_is_up = exynos_cpu_is_up, }; -static void __init exynos_mcpm_usage_count_init(void) -{ - unsigned int mpidr, cpu, cluster; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - - pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); - BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || - cluster >= EXYNOS5420_NR_CLUSTERS); - - cpu_use_count[cpu][cluster] = 1; -} - /* * Enable cluster-level coherency, in preparation for turning on the MMU. */ @@ -302,19 +180,6 @@ static void __naked exynos_pm_power_up_setup(unsigned int affinity_level) "b cci_enable_port_for_self"); } -static void __init exynos_cache_off(void) -{ - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { - /* disable L2 prefetching on the Cortex-A15 */ - asm volatile( - "mcr p15, 1, %0, c15, c0, 3\n\t" - "isb\n\t" - "dsb" - : : "r" (0x400)); - } - exynos_v7_exit_coherency_flush(all); -} - static const struct of_device_id exynos_dt_mcpm_match[] = { { .compatible = "samsung,exynos5420" }, { .compatible = "samsung,exynos5800" }, @@ -370,13 +235,11 @@ static int __init exynos_mcpm_init(void) */ pmu_raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3); - exynos_mcpm_usage_count_init(); - ret = mcpm_platform_register(&exynos_power_ops); if (!ret) ret = mcpm_sync_init(exynos_pm_power_up_setup); if (!ret) - ret = mcpm_loopback(exynos_cache_off); /* turn on the CCI */ + ret = mcpm_loopback(exynos_cluster_cache_disable); /* turn on the CCI */ if (ret) { iounmap(ns_sram_base_addr); return ret; diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 3f32c47a6d74..ebd135bb0995 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -126,8 +126,9 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) */ void exynos_cpu_power_down(int cpu) { - if (cpu == 0 && (of_machine_is_compatible("samsung,exynos5420") || - of_machine_is_compatible("samsung,exynos5800"))) { + u32 core_conf; + + if (cpu == 0 && (soc_is_exynos5420() || soc_is_exynos5800())) { /* * Bypass power down for CPU0 during suspend. Check for * the SYS_PWR_REG value to decide if we are suspending @@ -138,7 +139,10 @@ void exynos_cpu_power_down(int cpu) if (!(val & S5P_CORE_LOCAL_PWR_EN)) return; } - pmu_raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu)); + + core_conf = pmu_raw_readl(EXYNOS_ARM_CORE_CONFIGURATION(cpu)); + core_conf &= ~S5P_CORE_LOCAL_PWR_EN; + pmu_raw_writel(core_conf, EXYNOS_ARM_CORE_CONFIGURATION(cpu)); } /** @@ -149,7 +153,12 @@ void exynos_cpu_power_down(int cpu) */ void exynos_cpu_power_up(int cpu) { - pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN, + u32 core_conf = S5P_CORE_LOCAL_PWR_EN; + + if (soc_is_exynos3250()) + core_conf |= S5P_CORE_AUTOWAKEUP_EN; + + pmu_raw_writel(core_conf, EXYNOS_ARM_CORE_CONFIGURATION(cpu)); } @@ -227,6 +236,10 @@ static void exynos_core_restart(u32 core_id) if (!of_machine_is_compatible("samsung,exynos3250")) return; + while (!pmu_raw_readl(S5P_PMU_SPARE2)) + udelay(10); + udelay(10); + val = pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(core_id)); val |= S5P_CORE_WAKEUP_FROM_LOCAL_CFG; pmu_raw_writel(val, EXYNOS_ARM_CORE_STATUS(core_id)); @@ -347,7 +360,10 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) call_firmware_op(cpu_boot, core_id); - arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + if (soc_is_exynos3250()) + dsb_sev(); + else + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); if (pen_release == -1) break; diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index e6209dadc00d..cc75ab448be3 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -127,6 +127,8 @@ int exynos_pm_central_resume(void) static void exynos_set_wakeupmask(long mask) { pmu_raw_writel(mask, S5P_WAKEUP_MASK); + if (soc_is_exynos3250()) + pmu_raw_writel(0x0, S5P_WAKEUP_MASK2); } static void exynos_cpu_set_boot_vector(long flags) @@ -140,7 +142,7 @@ static int exynos_aftr_finisher(unsigned long flags) { int ret; - exynos_set_wakeupmask(0x0000ff3e); + exynos_set_wakeupmask(soc_is_exynos3250() ? 0x40003ffe : 0x0000ff3e); /* Set value of power down register for aftr mode */ exynos_sys_powerdown_conf(SYS_AFTR); @@ -157,8 +159,13 @@ static int exynos_aftr_finisher(unsigned long flags) void exynos_enter_aftr(void) { + unsigned int cpuid = smp_processor_id(); + cpu_pm_enter(); + if (soc_is_exynos3250()) + exynos_set_boot_flag(cpuid, C2_STATE); + exynos_pm_central_suspend(); if (of_machine_is_compatible("samsung,exynos4212") || @@ -178,9 +185,13 @@ void exynos_enter_aftr(void) exynos_pm_central_resume(); + if (soc_is_exynos3250()) + exynos_clear_boot_flag(cpuid, C2_STATE); + cpu_pm_exit(); } +#if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE) static atomic_t cpu1_wakeup = ATOMIC_INIT(0); static int exynos_cpu0_enter_aftr(void) @@ -302,3 +313,4 @@ struct cpuidle_exynos_data cpuidle_coupled_exynos_data = { .pre_enter_aftr = exynos_pre_enter_aftr, .post_enter_aftr = exynos_post_enter_aftr, }; +#endif /* CONFIG_SMP && CONFIG_ARM_EXYNOS_CPUIDLE */ diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 20f267121b3e..cbe56b35aea0 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -37,6 +37,7 @@ struct exynos_pm_domain { struct clk *oscclk; struct clk *clk[MAX_CLK_PER_DOMAIN]; struct clk *pclk[MAX_CLK_PER_DOMAIN]; + struct clk *asb_clk[MAX_CLK_PER_DOMAIN]; }; static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) @@ -45,14 +46,19 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) void __iomem *base; u32 timeout, pwr; char *op; + int i; pd = container_of(domain, struct exynos_pm_domain, pd); base = pd->base; + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + if (IS_ERR(pd->asb_clk[i])) + break; + clk_prepare_enable(pd->asb_clk[i]); + } + /* Set oscclk before powering off a domain*/ if (!power_on) { - int i; - for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { if (IS_ERR(pd->clk[i])) break; @@ -81,8 +87,6 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) /* Restore clocks after powering on a domain*/ if (power_on) { - int i; - for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { if (IS_ERR(pd->clk[i])) break; @@ -92,6 +96,12 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) } } + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + if (IS_ERR(pd->asb_clk[i])) + break; + clk_disable_unprepare(pd->asb_clk[i]); + } + return 0; } @@ -125,12 +135,21 @@ static __init int exynos4_pm_init_power_domain(void) return -ENOMEM; } - pd->pd.name = kstrdup(np->name, GFP_KERNEL); + pd->pd.name = kstrdup(dev_name(dev), GFP_KERNEL); pd->name = pd->pd.name; pd->base = of_iomap(np, 0); pd->pd.power_off = exynos_pd_power_off; pd->pd.power_on = exynos_pd_power_on; + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + char clk_name[8]; + + snprintf(clk_name, sizeof(clk_name), "asb%d", i); + pd->asb_clk[i] = clk_get(dev, clk_name); + if (IS_ERR(pd->asb_clk[i])) + break; + } + pd->oscclk = clk_get(dev, "oscclk"); if (IS_ERR(pd->oscclk)) goto no_clk; @@ -161,6 +180,34 @@ no_clk: of_genpd_add_provider_simple(np, &pd->pd); } + /* Assign the child power domains to their parents */ + for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { + struct generic_pm_domain *child_domain, *parent_domain; + struct of_phandle_args args; + + args.np = np; + args.args_count = 0; + child_domain = of_genpd_get_from_provider(&args); + if (!child_domain) + continue; + + if (of_parse_phandle_with_args(np, "power-domains", + "#power-domain-cells", 0, &args) != 0) + continue; + + parent_domain = of_genpd_get_from_provider(&args); + if (!parent_domain) + continue; + + if (pm_genpd_add_subdomain(parent_domain, child_domain)) + pr_warn("%s failed to add subdomain: %s\n", + parent_domain->name, child_domain->name); + else + pr_info("%s has as child subdomain: %s.\n", + parent_domain->name, child_domain->name); + of_node_put(np); + } + return 0; } arch_initcall(exynos4_pm_init_power_domain); diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h index eb461e1c325a..b7614333d296 100644 --- a/arch/arm/mach-exynos/regs-pmu.h +++ b/arch/arm/mach-exynos/regs-pmu.h @@ -43,12 +43,14 @@ #define S5P_WAKEUP_STAT 0x0600 #define S5P_EINT_WAKEUP_MASK 0x0604 #define S5P_WAKEUP_MASK 0x0608 +#define S5P_WAKEUP_MASK2 0x0614 #define S5P_INFORM0 0x0800 #define S5P_INFORM1 0x0804 #define S5P_INFORM5 0x0814 #define S5P_INFORM6 0x0818 #define S5P_INFORM7 0x081C +#define S5P_PMU_SPARE2 0x0908 #define S5P_PMU_SPARE3 0x090C #define EXYNOS_IROM_DATA2 0x0988 @@ -182,6 +184,7 @@ #define S5P_CORE_LOCAL_PWR_EN 0x3 #define S5P_CORE_WAKEUP_FROM_LOCAL_CFG (0x3 << 8) +#define S5P_CORE_AUTOWAKEUP_EN (1 << 31) /* Only for EXYNOS4210 */ #define S5P_CMU_CLKSTOP_LCD1_LOWPWR 0x1154 diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S index 31d25834b9c4..cf950790fbdc 100644 --- a/arch/arm/mach-exynos/sleep.S +++ b/arch/arm/mach-exynos/sleep.S @@ -23,14 +23,7 @@ #define CPU_MASK 0xff0ffff0 #define CPU_CORTEX_A9 0x410fc090 - /* - * The following code is located into the .data section. This is to - * allow l2x0_regs_phys to be accessed with a relative load while we - * can't rely on any MMU translation. We could have put l2x0_regs_phys - * in the .text section as well, but some setups might insist on it to - * be truly read-only. (Reference from: arch/arm/kernel/sleep.S) - */ - .data + .text .align /* @@ -69,10 +62,12 @@ ENTRY(exynos_cpu_resume_ns) cmp r0, r1 bne skip_cp15 - adr r0, cp15_save_power + adr r0, _cp15_save_power ldr r1, [r0] - adr r0, cp15_save_diag + ldr r1, [r0, r1] + adr r0, _cp15_save_diag ldr r2, [r0] + ldr r2, [r0, r2] mov r0, #SMC_CMD_C15RESUME dsb smc #0 @@ -118,14 +113,20 @@ skip_l2x0: skip_cp15: b cpu_resume ENDPROC(exynos_cpu_resume_ns) + + .align +_cp15_save_power: + .long cp15_save_power - . +_cp15_save_diag: + .long cp15_save_diag - . +#ifdef CONFIG_CACHE_L2X0 +1: .long l2x0_saved_regs - . +#endif /* CONFIG_CACHE_L2X0 */ + + .data .globl cp15_save_diag cp15_save_diag: .long 0 @ cp15 diagnostic .globl cp15_save_power cp15_save_power: .long 0 @ cp15 power control - -#ifdef CONFIG_CACHE_L2X0 - .align -1: .long l2x0_saved_regs - . -#endif /* CONFIG_CACHE_L2X0 */ diff --git a/arch/arm/mach-exynos/smc.h b/arch/arm/mach-exynos/smc.h index f7b82f9c1e21..c2845717bc8f 100644 --- a/arch/arm/mach-exynos/smc.h +++ b/arch/arm/mach-exynos/smc.h @@ -17,6 +17,8 @@ #define SMC_CMD_SLEEP (-3) #define SMC_CMD_CPU1BOOT (-4) #define SMC_CMD_CPU0AFTR (-5) +#define SMC_CMD_SAVE (-6) +#define SMC_CMD_SHUTDOWN (-7) /* For CP15 Access */ #define SMC_CMD_C15RESUME (-11) /* For L2 Cache Access */ @@ -32,4 +34,11 @@ extern void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3); #endif /* __ASSEMBLY__ */ +/* op type for SMC_CMD_SAVE and SMC_CMD_SHUTDOWN */ +#define OP_TYPE_CORE 0x0 +#define OP_TYPE_CLUSTER 0x1 + +/* Power State required for SMC_CMD_SAVE and SMC_CMD_SHUTDOWN */ +#define SMC_POWERSTATE_IDLE 0x1 + #endif diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index 52e2b1a2fddb..3e6aea7f83af 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -18,7 +18,9 @@ #include <linux/syscore_ops.h> #include <linux/cpu_pm.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/of_address.h> #include <linux/err.h> #include <linux/regulator/machine.h> @@ -43,8 +45,8 @@ #define EXYNOS5420_CPU_STATE 0x28 /** - * struct exynos_wkup_irq - Exynos GIC to PMU IRQ mapping - * @hwirq: Hardware IRQ signal of the GIC + * struct exynos_wkup_irq - PMU IRQ to mask mapping + * @hwirq: Hardware IRQ signal of the PMU * @mask: Mask in PMU wake-up mask register */ struct exynos_wkup_irq { @@ -63,8 +65,6 @@ static struct sleep_save exynos_core_save[] = { struct exynos_pm_data { const struct exynos_wkup_irq *wkup_irq; - struct sleep_save *extra_save; - int num_extra_save; unsigned int wake_disable_mask; unsigned int *release_ret_regs; @@ -75,7 +75,7 @@ struct exynos_pm_data { int (*cpu_suspend)(unsigned long); }; -struct exynos_pm_data *pm_data; +static const struct exynos_pm_data *pm_data; static int exynos5420_cpu_state; static unsigned int exynos_pmu_spare3; @@ -87,24 +87,24 @@ static unsigned int exynos_pmu_spare3; static u32 exynos_irqwake_intmask = 0xffffffff; static const struct exynos_wkup_irq exynos3250_wkup_irq[] = { - { 73, BIT(1) }, /* RTC alarm */ - { 74, BIT(2) }, /* RTC tick */ + { 105, BIT(1) }, /* RTC alarm */ + { 106, BIT(2) }, /* RTC tick */ { /* sentinel */ }, }; static const struct exynos_wkup_irq exynos4_wkup_irq[] = { - { 76, BIT(1) }, /* RTC alarm */ - { 77, BIT(2) }, /* RTC tick */ + { 44, BIT(1) }, /* RTC alarm */ + { 45, BIT(2) }, /* RTC tick */ { /* sentinel */ }, }; static const struct exynos_wkup_irq exynos5250_wkup_irq[] = { - { 75, BIT(1) }, /* RTC alarm */ - { 76, BIT(2) }, /* RTC tick */ + { 43, BIT(1) }, /* RTC alarm */ + { 44, BIT(2) }, /* RTC tick */ { /* sentinel */ }, }; -unsigned int exynos_release_ret_regs[] = { +static unsigned int exynos_release_ret_regs[] = { S5P_PAD_RET_MAUDIO_OPTION, S5P_PAD_RET_GPIO_OPTION, S5P_PAD_RET_UART_OPTION, @@ -115,7 +115,7 @@ unsigned int exynos_release_ret_regs[] = { REG_TABLE_END, }; -unsigned int exynos3250_release_ret_regs[] = { +static unsigned int exynos3250_release_ret_regs[] = { S5P_PAD_RET_MAUDIO_OPTION, S5P_PAD_RET_GPIO_OPTION, S5P_PAD_RET_UART_OPTION, @@ -128,7 +128,7 @@ unsigned int exynos3250_release_ret_regs[] = { REG_TABLE_END, }; -unsigned int exynos5420_release_ret_regs[] = { +static unsigned int exynos5420_release_ret_regs[] = { EXYNOS_PAD_RET_DRAM_OPTION, EXYNOS_PAD_RET_MAUDIO_OPTION, EXYNOS_PAD_RET_JTAG_OPTION, @@ -167,6 +167,113 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state) return -ENOENT; } +static struct irq_chip exynos_pmu_chip = { + .name = "PMU", + .irq_eoi = irq_chip_eoi_parent, + .irq_mask = irq_chip_mask_parent, + .irq_unmask = irq_chip_unmask_parent, + .irq_retrigger = irq_chip_retrigger_hierarchy, + .irq_set_wake = exynos_irq_set_wake, +#ifdef CONFIG_SMP + .irq_set_affinity = irq_chip_set_affinity_parent, +#endif +}; + +static int exynos_pmu_domain_xlate(struct irq_domain *domain, + struct device_node *controller, + const u32 *intspec, + unsigned int intsize, + unsigned long *out_hwirq, + unsigned int *out_type) +{ + if (domain->of_node != controller) + return -EINVAL; /* Shouldn't happen, really... */ + if (intsize != 3) + return -EINVAL; /* Not GIC compliant */ + if (intspec[0] != 0) + return -EINVAL; /* No PPI should point to this domain */ + + *out_hwirq = intspec[1]; + *out_type = intspec[2]; + return 0; +} + +static int exynos_pmu_domain_alloc(struct irq_domain *domain, + unsigned int virq, + unsigned int nr_irqs, void *data) +{ + struct of_phandle_args *args = data; + struct of_phandle_args parent_args; + irq_hw_number_t hwirq; + int i; + + if (args->args_count != 3) + return -EINVAL; /* Not GIC compliant */ + if (args->args[0] != 0) + return -EINVAL; /* No PPI should point to this domain */ + + hwirq = args->args[1]; + + for (i = 0; i < nr_irqs; i++) + irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i, + &exynos_pmu_chip, NULL); + + parent_args = *args; + parent_args.np = domain->parent->of_node; + return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args); +} + +static struct irq_domain_ops exynos_pmu_domain_ops = { + .xlate = exynos_pmu_domain_xlate, + .alloc = exynos_pmu_domain_alloc, + .free = irq_domain_free_irqs_common, +}; + +static int __init exynos_pmu_irq_init(struct device_node *node, + struct device_node *parent) +{ + struct irq_domain *parent_domain, *domain; + + if (!parent) { + pr_err("%s: no parent, giving up\n", node->full_name); + return -ENODEV; + } + + parent_domain = irq_find_host(parent); + if (!parent_domain) { + pr_err("%s: unable to obtain parent domain\n", node->full_name); + return -ENXIO; + } + + pmu_base_addr = of_iomap(node, 0); + + if (!pmu_base_addr) { + pr_err("%s: failed to find exynos pmu register\n", + node->full_name); + return -ENOMEM; + } + + domain = irq_domain_add_hierarchy(parent_domain, 0, 0, + node, &exynos_pmu_domain_ops, + NULL); + if (!domain) { + iounmap(pmu_base_addr); + return -ENOMEM; + } + + return 0; +} + +#define EXYNOS_PMU_IRQ(symbol, name) OF_DECLARE_2(irqchip, symbol, name, exynos_pmu_irq_init) + +EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu"); +EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu"); +EXYNOS_PMU_IRQ(exynos4212_pmu_irq, "samsung,exynos4212-pmu"); +EXYNOS_PMU_IRQ(exynos4412_pmu_irq, "samsung,exynos4412-pmu"); +EXYNOS_PMU_IRQ(exynos4415_pmu_irq, "samsung,exynos4415-pmu"); +EXYNOS_PMU_IRQ(exynos5250_pmu_irq, "samsung,exynos5250-pmu"); +EXYNOS_PMU_IRQ(exynos5420_pmu_irq, "samsung,exynos5420-pmu"); + static int exynos_cpu_do_idle(void) { /* issue the standby signal into the pm unit. */ @@ -240,10 +347,6 @@ static void exynos_pm_prepare(void) s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - if (pm_data->extra_save) - s3c_pm_do_save(pm_data->extra_save, - pm_data->num_extra_save); - exynos_pm_enter_sleep_mode(); /* ensure at least INFORM0 has the resume address */ @@ -366,10 +469,6 @@ static void exynos_pm_resume(void) /* For release retention */ exynos_pm_release_retention(); - if (pm_data->extra_save) - s3c_pm_do_restore_core(pm_data->extra_save, - pm_data->num_extra_save); - s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); if (cpuid == ARM_CPU_PART_CORTEX_A9) @@ -576,7 +675,7 @@ static const struct exynos_pm_data exynos5250_pm_data = { .cpu_suspend = exynos_cpu_suspend, }; -static struct exynos_pm_data exynos5420_pm_data = { +static const struct exynos_pm_data exynos5420_pm_data = { .wkup_irq = exynos5250_wkup_irq, .wake_disable_mask = (0x7F << 7) | (0x1F << 1), .release_ret_regs = exynos5420_release_ret_regs, @@ -615,17 +714,19 @@ static struct syscore_ops exynos_pm_syscore_ops; void __init exynos_pm_init(void) { const struct of_device_id *match; + struct device_node *np; u32 tmp; - of_find_matching_node_and_match(NULL, exynos_pmu_of_device_ids, &match); - if (!match) { + np = of_find_matching_node_and_match(NULL, exynos_pmu_of_device_ids, &match); + if (!np) { pr_err("Failed to find PMU node\n"); return; } - pm_data = (struct exynos_pm_data *) match->data; - /* Platform-specific GIC callback */ - gic_arch_extn.irq_set_wake = exynos_irq_set_wake; + if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) + pr_warn("Outdated DT detected, suspend/resume will NOT work\n"); + + pm_data = (const struct exynos_pm_data *) match->data; /* All wakeup disable */ tmp = pmu_raw_readl(S5P_WAKEUP_MASK); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index e8627e04e1e6..3a3d3e9d7bfd 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -21,6 +21,7 @@ config MXC_AVIC config MXC_DEBUG_BOARD bool "Enable MXC debug board(for 3-stack)" + depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS help The debug board is an integral part of the MXC 3-stack(PDK) platforms, it can be attached or removed from the peripheral @@ -50,6 +51,7 @@ config HAVE_IMX_ANATOP config HAVE_IMX_GPC bool + select PM_GENERIC_DOMAINS if PM config HAVE_IMX_MMDC bool @@ -77,13 +79,6 @@ config SOC_IMX21 select IMX_HAVE_IOMUX_V1 select MXC_AVIC -config SOC_IMX25 - bool - select ARCH_MXC_IOMUX_V3 - select CPU_ARM926T - select MXC_AVIC - select PINCTRL_IMX25 - config SOC_IMX27 bool select CPU_ARM926T @@ -149,62 +144,6 @@ config MACH_MX21ADS Include support for MX21ADS platform. This includes specific configurations for the board and its peripherals. -comment "MX25 platforms:" - -config MACH_MX25_3DS - bool "Support MX25PDK (3DS) Platform" - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMXDI_RTC - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select SOC_IMX25 - -config MACH_EUKREA_CPUIMX25SD - bool "Support Eukrea CPUIMX25 Platform" - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMXDI_RTC - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX25 - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX25SD - default MACH_EUKREA_MBIMXSD25_BASEBOARD - -config MACH_EUKREA_MBIMXSD25_BASEBOARD - bool "Eukrea MBIMXSD development board" - select IMX_HAVE_PLATFORM_GPIO_KEYS - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMXSD evaluation board. - -endchoice - -config MACH_IMX25_DT - bool "Support i.MX25 platforms from device tree" - select SOC_IMX25 - help - Include support for Freescale i.MX25 based platforms - using the device tree for discovery - comment "MX27 platforms:" config MACH_MX27ADS @@ -557,6 +496,20 @@ config MACH_VPR200 endif +if ARCH_MULTI_V5 + +comment "Device tree only" + +config SOC_IMX25 + bool "i.MX25 support" + select ARCH_MXC_IOMUX_V3 + select CPU_ARM926T + select MXC_AVIC + select PINCTRL_IMX25 + help + This enables support for Freescale i.MX25 processor +endif + if ARCH_MULTI_V7 comment "Device tree only" @@ -631,12 +584,14 @@ config SOC_IMX6SX config SOC_VF610 bool "Vybrid Family VF610 support" + select IRQ_DOMAIN_HIERARCHY select ARM_GIC select PINCTRL_VF610 select PL310_ERRATA_769419 if CACHE_L2X0 + select SMP_ON_UP if SMP help - This enable support for Freescale Vybrid VF610 processor. + This enables support for Freescale Vybrid VF610 processor. choice prompt "Clocksource for scheduler clock" @@ -666,7 +621,7 @@ config SOC_LS1021A select ZONE_DMA if ARM_LPAE help - This enable support for Freescale LS1021A processor. + This enables support for Freescale LS1021A processor. endif diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 8d1b10180908..3244cf1d2773 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -3,7 +3,7 @@ obj-y := time.o cpu.o system.o irq-common.o obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o -obj-$(CONFIG_SOC_IMX25) += clk-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o +obj-$(CONFIG_SOC_IMX25) += clk-imx25.o cpu-imx25.o mach-imx25.o obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o @@ -48,12 +48,6 @@ obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o # i.MX21 based machines obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o -# i.MX25 based machines -obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o -obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o -obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o - # i.MX27 based machines obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index 59c0c8558c6b..9c2633a9de9f 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -30,7 +30,6 @@ #include "clk.h" #include "common.h" #include "hardware.h" -#include "mx25.h" #define CCM_MPCTL 0x00 #define CCM_UPCTL 0x04 @@ -239,80 +238,6 @@ static int __init __mx25_clocks_init(unsigned long osc_rate, return 0; } -int __init mx25_clocks_init(void) -{ - void __iomem *ccm; - - ccm = ioremap(MX25_CRM_BASE_ADDR, SZ_16K); - - __mx25_clocks_init(24000000, ccm); - - clk_register_clkdev(clk[gpt1_ipg], "ipg", "imx-gpt.0"); - clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); - /* i.mx25 has the i.mx21 type uart */ - clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0"); - clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0"); - clk_register_clkdev(clk[uart2_ipg], "ipg", "imx21-uart.1"); - clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.1"); - clk_register_clkdev(clk[uart3_ipg], "ipg", "imx21-uart.2"); - clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.2"); - clk_register_clkdev(clk[uart4_ipg], "ipg", "imx21-uart.3"); - clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.3"); - clk_register_clkdev(clk[uart5_ipg], "ipg", "imx21-uart.4"); - clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.4"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); - clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.0"); - clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1"); - clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.1"); - clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); - clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2"); - clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); - clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27"); - clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); - clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0"); - /* i.mx25 has the i.mx35 type cspi */ - clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0"); - clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1"); - clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2"); - clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad"); - clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc"); - clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0"); - clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.1"); - clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.2"); - clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0"); - clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0"); - clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0"); - clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx21-fb.0"); - clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx21-fb.0"); - clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx21-fb.0"); - clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1"); - clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0"); - clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0"); - clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0"); - clk_register_clkdev(clk[esdhc2_ipg_per], "per", "sdhci-esdhc-imx25.1"); - clk_register_clkdev(clk[esdhc2_ipg], "ipg", "sdhci-esdhc-imx25.1"); - clk_register_clkdev(clk[esdhc2_ahb], "ahb", "sdhci-esdhc-imx25.1"); - clk_register_clkdev(clk[csi_ipg_per], "per", "imx25-camera.0"); - clk_register_clkdev(clk[csi_ipg], "ipg", "imx25-camera.0"); - clk_register_clkdev(clk[csi_ahb], "ahb", "imx25-camera.0"); - clk_register_clkdev(clk[dummy], "audmux", NULL); - clk_register_clkdev(clk[can1_ipg], NULL, "flexcan.0"); - clk_register_clkdev(clk[can2_ipg], NULL, "flexcan.1"); - /* i.mx25 has the i.mx35 type sdma */ - clk_register_clkdev(clk[sdma_ipg], "ipg", "imx35-sdma"); - clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma"); - clk_register_clkdev(clk[iim_ipg], "iim", NULL); - - mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1); - - return 0; -} - static void __init mx25_clocks_init_dt(struct device_node *np) { struct device_node *refnp; diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index d04a430607b8..469a150bf98f 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -119,6 +119,7 @@ static unsigned int share_count_asrc; static unsigned int share_count_ssi1; static unsigned int share_count_ssi2; static unsigned int share_count_ssi3; +static unsigned int share_count_mipi_core_cfg; static void __init imx6q_clocks_init(struct device_node *ccm_node) { @@ -246,6 +247,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2); clk[IMX6QDL_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8); + clk[IMX6QDL_CLK_VIDEO_27M] = imx_clk_fixed_factor("video_27m", "pll3_pfd1_540m", 1, 20); if (cpu_is_imx6dl()) { clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1); clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1); @@ -400,7 +402,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24); clk[IMX6QDL_CLK_GPU3D_CORE] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26); clk[IMX6QDL_CLK_HDMI_IAHB] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0); - clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "pll3_pfd1_540m", base + 0x70, 4); + clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "video_27m", base + 0x70, 4); clk[IMX6QDL_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6); clk[IMX6QDL_CLK_I2C2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8); clk[IMX6QDL_CLK_I2C3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10); @@ -415,7 +417,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12); clk[IMX6QDL_CLK_LDB_DI1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); clk[IMX6QDL_CLK_IPU2_DI1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); - clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16); + clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2_shared("hsi_tx", "hsi_tx_podf", base + 0x74, 16, &share_count_mipi_core_cfg); + clk[IMX6QDL_CLK_MIPI_CORE_CFG] = imx_clk_gate2_shared("mipi_core_cfg", "video_27m", base + 0x74, 16, &share_count_mipi_core_cfg); + clk[IMX6QDL_CLK_MIPI_IPG] = imx_clk_gate2_shared("mipi_ipg", "ipg", base + 0x74, 16, &share_count_mipi_core_cfg); if (cpu_is_imx6dl()) /* * The multiplexer and divider of the imx6q clock gpu2d get diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 1028b6c505c4..0f04e30b726d 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -23,13 +23,11 @@ struct of_device_id; void mx1_map_io(void); void mx21_map_io(void); -void mx25_map_io(void); void mx27_map_io(void); void mx31_map_io(void); void mx35_map_io(void); void imx1_init_early(void); void imx21_init_early(void); -void imx25_init_early(void); void imx27_init_early(void); void imx31_init_early(void); void imx35_init_early(void); @@ -37,13 +35,11 @@ void mxc_init_irq(void __iomem *); void tzic_init_irq(void); void mx1_init_irq(void); void mx21_init_irq(void); -void mx25_init_irq(void); void mx27_init_irq(void); void mx31_init_irq(void); void mx35_init_irq(void); void imx1_soc_init(void); void imx21_soc_init(void); -void imx25_soc_init(void); void imx27_soc_init(void); void imx31_soc_init(void); void imx35_soc_init(void); @@ -51,7 +47,6 @@ void epit_timer_init(void __iomem *base, int irq); void mxc_timer_init(void __iomem *, int); int mx1_clocks_init(unsigned long fref); int mx21_clocks_init(unsigned long lref, unsigned long fref); -int mx25_clocks_init(void); int mx27_clocks_init(unsigned long fref); int mx31_clocks_init(unsigned long fref); int mx35_clocks_init(void); @@ -71,6 +66,7 @@ unsigned int imx_get_soc_revision(void); void imx_init_revision_from_anatop(void); struct device *imx_soc_device_init(void); void imx6_enable_rbc(bool enable); +void imx_gpc_check_dt(void); void imx_gpc_set_arm_power_in_lpm(bool power_off); void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw); void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw); @@ -106,7 +102,6 @@ static inline void imx_scu_map_io(void) {} static inline void imx_smp_prepare(void) {} #endif void imx_src_init(void); -void imx_gpc_init(void); void imx_gpc_pre_suspend(bool arm_power_off); void imx_gpc_post_resume(void); void imx_gpc_mask_all(void); diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c index 96ec64b5ff7d..d0ad67e802d3 100644 --- a/arch/arm/mach-imx/cpu-imx25.c +++ b/arch/arm/mach-imx/cpu-imx25.c @@ -11,6 +11,8 @@ */ #include <linux/module.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> #include "iim.h" #include "hardware.h" @@ -20,8 +22,15 @@ static int mx25_cpu_rev = -1; static int mx25_read_cpu_rev(void) { u32 rev; + void __iomem *iim_base; + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim"); + iim_base = of_iomap(np, 0); + BUG_ON(!iim_base); + rev = readl(iim_base + MXC_IIMSREV); + iounmap(iim_base); - rev = __raw_readl(MX25_IO_ADDRESS(MX25_IIM_BASE_ADDR + MXC_IIMSREV)); switch (rev) { case 0x00: return IMX_CHIP_REVISION_1_0; diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index d76d08623f9f..8e21ccc1eda2 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -9,7 +9,6 @@ #include <linux/cpuidle.h> #include <linux/module.h> #include <asm/cpuidle.h> -#include <asm/proc-fns.h> #include "common.h" #include "cpuidle.h" diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c index 7d92e6584551..5742a9fd1ef2 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sl.c +++ b/arch/arm/mach-imx/cpuidle-imx6sl.c @@ -9,7 +9,6 @@ #include <linux/cpuidle.h> #include <linux/module.h> #include <asm/cpuidle.h> -#include <asm/proc-fns.h> #include "common.h" #include "cpuidle.h" diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c index 5a36722b089d..2c9f1a8bf245 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sx.c +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c @@ -10,7 +10,6 @@ #include <linux/cpu_pm.h> #include <linux/module.h> #include <asm/cpuidle.h> -#include <asm/proc-fns.h> #include <asm/suspend.h> #include "common.h" diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h deleted file mode 100644 index 61a114cddc39..000000000000 --- a/arch/arm/mach-imx/devices-imx25.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include "devices/devices-common.h" - -extern const struct imx_fec_data imx25_fec_data; -#define imx25_add_fec(pdata) \ - imx_add_fec(&imx25_fec_data, pdata) - -extern const struct imx_flexcan_data imx25_flexcan_data[]; -#define imx25_add_flexcan(id) \ - imx_add_flexcan(&imx25_flexcan_data[id]) -#define imx25_add_flexcan0() imx25_add_flexcan(0) -#define imx25_add_flexcan1() imx25_add_flexcan(1) - -extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data; -#define imx25_add_fsl_usb2_udc(pdata) \ - imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata) - -extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data; -#define imx25_add_imxdi_rtc() \ - imx_add_imxdi_rtc(&imx25_imxdi_rtc_data) - -extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data; -#define imx25_add_imx2_wdt() \ - imx_add_imx2_wdt(&imx25_imx2_wdt_data) - -extern const struct imx_imx_fb_data imx25_imx_fb_data; -#define imx25_add_imx_fb(pdata) \ - imx_add_imx_fb(&imx25_imx_fb_data, pdata) - -extern const struct imx_imx_i2c_data imx25_imx_i2c_data[]; -#define imx25_add_imx_i2c(id, pdata) \ - imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata) -#define imx25_add_imx_i2c0(pdata) imx25_add_imx_i2c(0, pdata) -#define imx25_add_imx_i2c1(pdata) imx25_add_imx_i2c(1, pdata) -#define imx25_add_imx_i2c2(pdata) imx25_add_imx_i2c(2, pdata) - -extern const struct imx_imx_keypad_data imx25_imx_keypad_data; -#define imx25_add_imx_keypad(pdata) \ - imx_add_imx_keypad(&imx25_imx_keypad_data, pdata) - -extern const struct imx_imx_ssi_data imx25_imx_ssi_data[]; -#define imx25_add_imx_ssi(id, pdata) \ - imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata) - -extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[]; -#define imx25_add_imx_uart(id, pdata) \ - imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata) -#define imx25_add_imx_uart0(pdata) imx25_add_imx_uart(0, pdata) -#define imx25_add_imx_uart1(pdata) imx25_add_imx_uart(1, pdata) -#define imx25_add_imx_uart2(pdata) imx25_add_imx_uart(2, pdata) -#define imx25_add_imx_uart3(pdata) imx25_add_imx_uart(3, pdata) -#define imx25_add_imx_uart4(pdata) imx25_add_imx_uart(4, pdata) - -extern const struct imx_mx2_camera_data imx25_mx2_camera_data; -#define imx25_add_mx2_camera(pdata) \ - imx_add_mx2_camera(&imx25_mx2_camera_data, pdata) - -extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data; -#define imx25_add_mxc_ehci_otg(pdata) \ - imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata) -extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data; -#define imx25_add_mxc_ehci_hs(pdata) \ - imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata) - -extern const struct imx_mxc_nand_data imx25_mxc_nand_data; -#define imx25_add_mxc_nand(pdata) \ - imx_add_mxc_nand(&imx25_mxc_nand_data, pdata) - -extern const struct imx_sdhci_esdhc_imx_data imx25_sdhci_esdhc_imx_data[]; -#define imx25_add_sdhci_esdhc_imx(id, pdata) \ - imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata) - -extern const struct imx_spi_imx_data imx25_cspi_data[]; -#define imx25_add_spi_imx(id, pdata) \ - imx_add_spi_imx(&imx25_cspi_data[id], pdata) -#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata) -#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata) -#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata) diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 1d2cc1805f3e..3a552989248e 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -21,9 +21,6 @@ config IMX_HAVE_PLATFORM_IMX27_CODA config IMX_HAVE_PLATFORM_IMX2_WDT bool -config IMX_HAVE_PLATFORM_IMXDI_RTC - bool - config IMX_HAVE_PLATFORM_IMX_FB bool diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index 8fdb12b4ca7e..e5cf587bc1a0 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -8,7 +8,6 @@ obj-y += platform-gpio-mxc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX27_CODA) += platform-imx27-coda.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o obj-y += platform-imx-dma.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o diff --git a/arch/arm/mach-imx/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c index d86f9250b4ee..b403a4fe2892 100644 --- a/arch/arm/mach-imx/devices/platform-fec.c +++ b/arch/arm/mach-imx/devices/platform-fec.c @@ -19,11 +19,6 @@ .irq = soc ## _INT_FEC, \ } -#ifdef CONFIG_SOC_IMX25 -const struct imx_fec_data imx25_fec_data __initconst = - imx_fec_data_entry_single(MX25, "imx25-fec"); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_fec_data imx27_fec_data __initconst = imx_fec_data_entry_single(MX27, "imx27-fec"); diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c index 23b0061347cb..25e1de6f3a47 100644 --- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c +++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c @@ -18,11 +18,6 @@ .irq = soc ## _INT_USB_OTG, \ } -#ifdef CONFIG_SOC_IMX25 -const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27"); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst = imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27"); diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c index 25a47c616b2d..7df6328306f9 100644 --- a/arch/arm/mach-imx/devices/platform-imx-fb.c +++ b/arch/arm/mach-imx/devices/platform-imx-fb.c @@ -29,11 +29,6 @@ const struct imx_imx_fb_data imx21_imx_fb_data __initconst = imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_SOC_IMX25 -const struct imx_imx_fb_data imx25_imx_fb_data __initconst = - imx_imx_fb_data_entry_single(MX25, "imx21-fb", SZ_16K); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_imx_fb_data imx27_imx_fb_data __initconst = imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K); diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c index 644ac2689882..ae9791522fc8 100644 --- a/arch/arm/mach-imx/devices/platform-imx-i2c.c +++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c @@ -31,16 +31,6 @@ const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst = imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_SOC_IMX25 -const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = { -#define imx25_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX25, "imx21-i2c", _id, _hwid, SZ_16K) - imx25_imx_i2c_data_entry(0, 1), - imx25_imx_i2c_data_entry(1, 2), - imx25_imx_i2c_data_entry(2, 3), -}; -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = { #define imx27_imx_i2c_data_entry(_id, _hwid) \ diff --git a/arch/arm/mach-imx/devices/platform-imx-keypad.c b/arch/arm/mach-imx/devices/platform-imx-keypad.c index f42200b7aca9..479e4d70dbf9 100644 --- a/arch/arm/mach-imx/devices/platform-imx-keypad.c +++ b/arch/arm/mach-imx/devices/platform-imx-keypad.c @@ -21,11 +21,6 @@ const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst = imx_imx_keypad_data_entry_single(MX21, SZ_16); #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_SOC_IMX25 -const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst = - imx_imx_keypad_data_entry_single(MX25, SZ_16K); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst = imx_imx_keypad_data_entry_single(MX27, SZ_16); diff --git a/arch/arm/mach-imx/devices/platform-imx-ssi.c b/arch/arm/mach-imx/devices/platform-imx-ssi.c index 1c7c721ebff1..6f0e94eb29ee 100644 --- a/arch/arm/mach-imx/devices/platform-imx-ssi.c +++ b/arch/arm/mach-imx/devices/platform-imx-ssi.c @@ -30,15 +30,6 @@ const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_SOC_IMX25 -const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = { -#define imx25_imx_ssi_data_entry(_id, _hwid) \ - imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K) - imx25_imx_ssi_data_entry(0, 1), - imx25_imx_ssi_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = { #define imx27_imx_ssi_data_entry(_id, _hwid) \ diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c index 8c01836bc1d4..6962cff4a950 100644 --- a/arch/arm/mach-imx/devices/platform-imx-uart.c +++ b/arch/arm/mach-imx/devices/platform-imx-uart.c @@ -47,18 +47,6 @@ const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = { }; #endif -#ifdef CONFIG_SOC_IMX25 -const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = { -#define imx25_imx_uart_data_entry(_id, _hwid) \ - imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K) - imx25_imx_uart_data_entry(0, 1), - imx25_imx_uart_data_entry(1, 2), - imx25_imx_uart_data_entry(2, 3), - imx25_imx_uart_data_entry(3, 4), - imx25_imx_uart_data_entry(4, 5), -}; -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = { #define imx27_imx_uart_data_entry(_id, _hwid) \ diff --git a/arch/arm/mach-imx/devices/platform-imx2-wdt.c b/arch/arm/mach-imx/devices/platform-imx2-wdt.c index 54f63bc25ca4..8c134c8d7500 100644 --- a/arch/arm/mach-imx/devices/platform-imx2-wdt.c +++ b/arch/arm/mach-imx/devices/platform-imx2-wdt.c @@ -25,11 +25,6 @@ const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst = imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_SOC_IMX25 -const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst = - imx_imx2_wdt_data_entry_single(MX25, 0, , SZ_16K); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst = imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K); diff --git a/arch/arm/mach-imx/devices/platform-imxdi_rtc.c b/arch/arm/mach-imx/devices/platform-imxdi_rtc.c deleted file mode 100644 index 5bb490d556ea..000000000000 --- a/arch/arm/mach-imx/devices/platform-imxdi_rtc.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include <asm/sizes.h> - -#include "../hardware.h" -#include "devices-common.h" - -#define imx_imxdi_rtc_data_entry_single(soc) \ - { \ - .iobase = soc ## _DRYICE_BASE_ADDR, \ - .irq = soc ## _INT_DRYICE, \ - } - -#ifdef CONFIG_SOC_IMX25 -const struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst = - imx_imxdi_rtc_data_entry_single(MX25); -#endif /* ifdef CONFIG_SOC_IMX25 */ - -struct platform_device *__init imx_add_imxdi_rtc( - const struct imx_imxdi_rtc_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device("imxdi_rtc", 0, - res, ARRAY_SIZE(res), NULL, 0); -} diff --git a/arch/arm/mach-imx/devices/platform-mx2-camera.c b/arch/arm/mach-imx/devices/platform-mx2-camera.c index b53e1f348f51..4c377c33242c 100644 --- a/arch/arm/mach-imx/devices/platform-mx2-camera.c +++ b/arch/arm/mach-imx/devices/platform-mx2-camera.c @@ -27,11 +27,6 @@ .irqemmaprp = soc ## _INT_EMMAPRP, \ } -#ifdef CONFIG_SOC_IMX25 -const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst = - imx_mx2_camera_data_entry_single(MX25, "imx25-camera"); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst = imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera"); diff --git a/arch/arm/mach-imx/devices/platform-mxc-ehci.c b/arch/arm/mach-imx/devices/platform-mxc-ehci.c index 296353662ff0..4537abd2a8f2 100644 --- a/arch/arm/mach-imx/devices/platform-mxc-ehci.c +++ b/arch/arm/mach-imx/devices/platform-mxc-ehci.c @@ -18,13 +18,6 @@ .irq = soc ## _INT_USB_ ## hs, \ } -#ifdef CONFIG_SOC_IMX25 -const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst = - imx_mxc_ehci_data_entry_single(MX25, 0, OTG); -const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst = - imx_mxc_ehci_data_entry_single(MX25, 1, HS); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst = imx_mxc_ehci_data_entry_single(MX27, 0, OTG); diff --git a/arch/arm/mach-imx/devices/platform-mxc_nand.c b/arch/arm/mach-imx/devices/platform-mxc_nand.c index fa618a34f462..676df4920c7b 100644 --- a/arch/arm/mach-imx/devices/platform-mxc_nand.c +++ b/arch/arm/mach-imx/devices/platform-mxc_nand.c @@ -34,11 +34,6 @@ const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst = imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_SOC_IMX25 -const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX25, "imx25-nand", SZ_8K); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst = imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K); diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c index aca825d74c48..5e9707b47f92 100644 --- a/arch/arm/mach-imx/devices/platform-spi_imx.c +++ b/arch/arm/mach-imx/devices/platform-spi_imx.c @@ -39,17 +39,6 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { }; #endif -#ifdef CONFIG_SOC_IMX25 -/* i.mx25 has the i.mx35 type cspi */ -const struct imx_spi_imx_data imx25_cspi_data[] __initconst = { -#define imx25_cspi_data_entry(_id, _hwid) \ - imx_spi_imx_data_entry(MX25, CSPI, "imx35-cspi", _id, _hwid, SZ_16K) - imx25_cspi_data_entry(0, 1), - imx25_cspi_data_entry(1, 2), - imx25_cspi_data_entry(2, 3), -}; -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_spi_imx_data imx27_cspi_data[] __initconst = { #define imx27_cspi_data_entry(_id, _hwid) \ diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c deleted file mode 100644 index 42a5a3d14c5f..000000000000 --- a/arch/arm/mach-imx/ehci-imx25.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> - * Copyright (C) 2010 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - */ - -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/platform_data/usb-ehci-mxc.h> - -#include "ehci.h" -#include "hardware.h" - -#define USBCTRL_OTGBASE_OFFSET 0x600 - -#define MX25_OTG_SIC_SHIFT 29 -#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT) -#define MX25_OTG_PM_BIT (1 << 24) -#define MX25_OTG_PP_BIT (1 << 11) -#define MX25_OTG_OCPOL_BIT (1 << 3) - -#define MX25_H1_SIC_SHIFT 21 -#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) -#define MX25_H1_PP_BIT (1 << 18) -#define MX25_H1_PM_BIT (1 << 16) -#define MX25_H1_IPPUE_UP_BIT (1 << 7) -#define MX25_H1_IPPUE_DOWN_BIT (1 << 6) -#define MX25_H1_TLL_BIT (1 << 5) -#define MX25_H1_USBTE_BIT (1 << 4) -#define MX25_H1_OCPOL_BIT (1 << 2) - -int mx25_initialize_usb_hw(int port, unsigned int flags) -{ - unsigned int v; - - v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); - - switch (port) { - case 0: /* OTG port */ - v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT | - MX25_OTG_OCPOL_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT; - - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX25_OTG_PM_BIT; - - if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) - v |= MX25_OTG_PP_BIT; - - if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) - v |= MX25_OTG_OCPOL_BIT; - - break; - case 1: /* H1 port */ - v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT | - MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT | - MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT; - - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX25_H1_PM_BIT; - - if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) - v |= MX25_H1_PP_BIT; - - if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) - v |= MX25_H1_OCPOL_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX25_H1_TLL_BIT; - - if (flags & MXC_EHCI_INTERNAL_PHY) - v |= MX25_H1_USBTE_BIT; - - if (flags & MXC_EHCI_IPPUE_DOWN) - v |= MX25_H1_IPPUE_DOWN_BIT; - - if (flags & MXC_EHCI_IPPUE_UP) - v |= MX25_H1_IPPUE_UP_BIT; - - break; - default: - return -EINVAL; - } - - writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); - - return 0; -} - diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c deleted file mode 100644 index e77cc3af6db2..000000000000 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ /dev/null @@ -1,310 +0,0 @@ -/* - * Copyright (C) 2010 Eric Benard - eric@eukrea.com - * - * Based on pcm970-baseboard.c which is : - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/spi/spi.h> -#include <video/platform_lcd.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" -#include "devices-imx25.h" -#include "hardware.h" -#include "iomux-mx25.h" -#include "mx25.h" - -static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { - /* LCD */ - MX25_PAD_LD0__LD0, - MX25_PAD_LD1__LD1, - MX25_PAD_LD2__LD2, - MX25_PAD_LD3__LD3, - MX25_PAD_LD4__LD4, - MX25_PAD_LD5__LD5, - MX25_PAD_LD6__LD6, - MX25_PAD_LD7__LD7, - MX25_PAD_LD8__LD8, - MX25_PAD_LD9__LD9, - MX25_PAD_LD10__LD10, - MX25_PAD_LD11__LD11, - MX25_PAD_LD12__LD12, - MX25_PAD_LD13__LD13, - MX25_PAD_LD14__LD14, - MX25_PAD_LD15__LD15, - MX25_PAD_GPIO_E__LD16, - MX25_PAD_GPIO_F__LD17, - MX25_PAD_HSYNC__HSYNC, - MX25_PAD_VSYNC__VSYNC, - MX25_PAD_LSCLK__LSCLK, - MX25_PAD_OE_ACD__OE_ACD, - MX25_PAD_CONTRAST__CONTRAST, - /* LCD_PWR */ - MX25_PAD_PWM__GPIO_1_26, - /* LED */ - MX25_PAD_POWER_FAIL__GPIO_3_19, - /* SWITCH */ - MX25_PAD_VSTBY_ACK__GPIO_3_18, - /* UART2 */ - MX25_PAD_UART2_RTS__UART2_RTS, - MX25_PAD_UART2_CTS__UART2_CTS, - MX25_PAD_UART2_TXD__UART2_TXD, - MX25_PAD_UART2_RXD__UART2_RXD, - /* SD1 */ - MX25_PAD_SD1_CMD__SD1_CMD, - MX25_PAD_SD1_CLK__SD1_CLK, - MX25_PAD_SD1_DATA0__SD1_DATA0, - MX25_PAD_SD1_DATA1__SD1_DATA1, - MX25_PAD_SD1_DATA2__SD1_DATA2, - MX25_PAD_SD1_DATA3__SD1_DATA3, - /* SD1 CD */ - MX25_PAD_DE_B__GPIO_2_20, - /* I2S */ - MX25_PAD_KPP_COL3__AUD5_TXFS, - MX25_PAD_KPP_COL2__AUD5_TXC, - MX25_PAD_KPP_COL1__AUD5_RXD, - MX25_PAD_KPP_COL0__AUD5_TXD, - /* CAN */ - MX25_PAD_GPIO_D__CAN2_RX, - MX25_PAD_GPIO_C__CAN2_TX, - /* SPI1 */ - MX25_PAD_CSPI1_MOSI__CSPI1_MOSI, - MX25_PAD_CSPI1_MISO__CSPI1_MISO, - MX25_PAD_CSPI1_SS0__GPIO_1_16, - MX25_PAD_CSPI1_SS1__GPIO_1_17, - MX25_PAD_CSPI1_SCLK__CSPI1_SCLK, - MX25_PAD_CSPI1_RDY__GPIO_2_22, -}; - -#define GPIO_LED1 IMX_GPIO_NR(3, 19) -#define GPIO_SWITCH1 IMX_GPIO_NR(3, 18) -#define GPIO_SD1CD IMX_GPIO_NR(2, 20) -#define GPIO_LCDPWR IMX_GPIO_NR(1, 26) -#define GPIO_SPI1_SS0 IMX_GPIO_NR(1, 16) -#define GPIO_SPI1_SS1 IMX_GPIO_NR(1, 17) -#define GPIO_SPI1_IRQ IMX_GPIO_NR(2, 22) - -static struct imx_fb_videomode eukrea_mximxsd_modes[] = { - { - .mode = { - .name = "CMO-QVGA", - .refresh = 60, - .xres = 320, - .yres = 240, - .pixclock = KHZ2PICOS(6500), - .left_margin = 30, - .right_margin = 38, - .upper_margin = 20, - .lower_margin = 3, - .hsync_len = 15, - .vsync_len = 4, - }, - .bpp = 16, - .pcr = 0xCAD08B80, - }, { - .mode = { - .name = "DVI-VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 32000, - .hsync_len = 7, - .left_margin = 100, - .right_margin = 100, - .vsync_len = 7, - .upper_margin = 7, - .lower_margin = 100, - }, - .pcr = 0xFA208B80, - .bpp = 16, - }, { - .mode = { - .name = "DVI-SVGA", - .refresh = 60, - .xres = 800, - .yres = 600, - .pixclock = 25000, - .hsync_len = 7, - .left_margin = 75, - .right_margin = 75, - .vsync_len = 7, - .upper_margin = 7, - .lower_margin = 75, - }, - .pcr = 0xFA208B80, - .bpp = 16, - }, -}; - -static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = { - .mode = eukrea_mximxsd_modes, - .num_modes = ARRAY_SIZE(eukrea_mximxsd_modes), - .pwmr = 0x00A903FF, - .lscr1 = 0x00120300, - .dmacr = 0x00040060, -}; - -static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) - gpio_direction_output(GPIO_LCDPWR, 1); - else - gpio_direction_output(GPIO_LCDPWR, 0); -} - -static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = { - .set_power = eukrea_mbimxsd_lcd_power_set, -}; - -static struct platform_device eukrea_mbimxsd_lcd_powerdev = { - .name = "platform-lcd", - .dev.platform_data = &eukrea_mbimxsd_lcd_power_data, -}; - -static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = { - { - .name = "led1", - .default_trigger = "heartbeat", - .active_low = 1, - .gpio = GPIO_LED1, - }, -}; - -static const struct gpio_led_platform_data - eukrea_mbimxsd_led_info __initconst = { - .leds = eukrea_mbimxsd_leds, - .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds), -}; - -static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { - { - .gpio = GPIO_SWITCH1, - .code = BTN_0, - .desc = "BP1", - .active_low = 1, - .wakeup = 1, - }, -}; - -static const struct gpio_keys_platform_data - eukrea_mbimxsd_button_data __initconst = { - .buttons = eukrea_mbimxsd_gpio_buttons, - .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons), -}; - -static struct platform_device *platform_devices[] __initdata = { - &eukrea_mbimxsd_lcd_powerdev, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, -}; - -static const -struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { - .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, -}; - -static struct esdhc_platform_data sd1_pdata = { - .cd_gpio = GPIO_SD1CD, - .cd_type = ESDHC_CD_GPIO, - .wp_type = ESDHC_WP_NONE, -}; - -static struct spi_board_info eukrea_mbimxsd25_spi_board_info[] __initdata = { - { - .modalias = "spidev", - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_0, - }, - { - .modalias = "spidev", - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 1, - .mode = SPI_MODE_0, - }, -}; - -static int eukrea_mbimxsd25_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1}; - -static const struct spi_imx_master eukrea_mbimxsd25_spi0_data __initconst = { - .chipselect = eukrea_mbimxsd25_spi_cs, - .num_chipselect = ARRAY_SIZE(eukrea_mbimxsd25_spi_cs), -}; - -/* - * system init for baseboard usage. Will be called by cpuimx25 init. - * - * Add platform devices present on this baseboard and init - * them from CPU side as far as required to use them later on - */ -void __init eukrea_mbimxsd25_baseboard_init(void) -{ - if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads, - ARRAY_SIZE(eukrea_mbimxsd_pads))) - printk(KERN_ERR "error setting mbimxsd pads !\n"); - - imx25_add_imx_uart1(&uart_pdata); - imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata); - imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); - - imx25_add_flexcan1(); - imx25_add_sdhci_esdhc_imx(0, &sd1_pdata); - - gpio_request(GPIO_LED1, "LED1"); - gpio_direction_output(GPIO_LED1, 1); - gpio_free(GPIO_LED1); - - gpio_request(GPIO_SWITCH1, "SWITCH1"); - gpio_direction_input(GPIO_SWITCH1); - gpio_free(GPIO_SWITCH1); - - gpio_request(GPIO_LCDPWR, "LCDPWR"); - gpio_direction_output(GPIO_LCDPWR, 1); - - i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices, - ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); - - gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ"); - gpio_direction_input(GPIO_SPI1_IRQ); - gpio_free(GPIO_SPI1_IRQ); - imx25_add_spi_imx0(&eukrea_mbimxsd25_spi0_data); - spi_register_board_info(eukrea_mbimxsd25_spi_board_info, - ARRAY_SIZE(eukrea_mbimxsd25_spi_board_info)); - - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); - imx_add_gpio_keys(&eukrea_mbimxsd_button_data); - imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); -} diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index 14d6c8249b76..6edc940e0865 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -100,7 +100,7 @@ static struct mx3fb_platform_data mx3fb_pdata __initdata = { .num_modes = ARRAY_SIZE(fb_modedb), }; -static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { +static const iomux_v3_cfg_t eukrea_mbimxsd_pads[] __initconst = { /* LCD */ MX35_PAD_LD0__IPU_DISPB_DAT_0, MX35_PAD_LD1__IPU_DISPB_DAT_1, diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 745caa18ab2c..4d60005e9277 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -10,15 +10,25 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <linux/clk.h> +#include <linux/delay.h> #include <linux/io.h> #include <linux/irq.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/pm_domain.h> +#include <linux/regulator/consumer.h> #include <linux/irqchip/arm-gic.h> #include "common.h" +#include "hardware.h" +#define GPC_CNTR 0x000 #define GPC_IMR1 0x008 +#define GPC_PGC_GPU_PDN 0x260 +#define GPC_PGC_GPU_PUPSCR 0x264 +#define GPC_PGC_GPU_PDNSCR 0x268 #define GPC_PGC_CPU_PDN 0x2a0 #define GPC_PGC_CPU_PUPSCR 0x2a4 #define GPC_PGC_CPU_PDNSCR 0x2a8 @@ -26,6 +36,19 @@ #define GPC_PGC_SW_SHIFT 0x0 #define IMR_NUM 4 +#define GPC_MAX_IRQS (IMR_NUM * 32) + +#define GPU_VPU_PUP_REQ BIT(1) +#define GPU_VPU_PDN_REQ BIT(0) + +#define GPC_CLK_MAX 6 + +struct pu_domain { + struct generic_pm_domain base; + struct regulator *reg; + struct clk *clk[GPC_CLK_MAX]; + int num_clks; +}; static void __iomem *gpc_base; static u32 gpc_wake_irqs[IMR_NUM]; @@ -77,17 +100,17 @@ void imx_gpc_post_resume(void) static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on) { - unsigned int idx = d->hwirq / 32 - 1; + unsigned int idx = d->hwirq / 32; u32 mask; - /* Sanity check for SPI irq */ - if (d->hwirq < 32) - return -EINVAL; - mask = 1 << d->hwirq % 32; gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask : gpc_wake_irqs[idx] & ~mask; + /* + * Do *not* call into the parent, as the GIC doesn't have any + * wake-up facility... + */ return 0; } @@ -117,7 +140,7 @@ void imx_gpc_hwirq_unmask(unsigned int hwirq) void __iomem *reg; u32 val; - reg = gpc_base + GPC_IMR1 + (hwirq / 32 - 1) * 4; + reg = gpc_base + GPC_IMR1 + hwirq / 32 * 4; val = readl_relaxed(reg); val &= ~(1 << hwirq % 32); writel_relaxed(val, reg); @@ -128,7 +151,7 @@ void imx_gpc_hwirq_mask(unsigned int hwirq) void __iomem *reg; u32 val; - reg = gpc_base + GPC_IMR1 + (hwirq / 32 - 1) * 4; + reg = gpc_base + GPC_IMR1 + hwirq / 32 * 4; val = readl_relaxed(reg); val |= 1 << (hwirq % 32); writel_relaxed(val, reg); @@ -136,37 +159,319 @@ void imx_gpc_hwirq_mask(unsigned int hwirq) static void imx_gpc_irq_unmask(struct irq_data *d) { - /* Sanity check for SPI irq */ - if (d->hwirq < 32) - return; - imx_gpc_hwirq_unmask(d->hwirq); + irq_chip_unmask_parent(d); } static void imx_gpc_irq_mask(struct irq_data *d) { - /* Sanity check for SPI irq */ - if (d->hwirq < 32) - return; - imx_gpc_hwirq_mask(d->hwirq); + irq_chip_mask_parent(d); } -void __init imx_gpc_init(void) +static struct irq_chip imx_gpc_chip = { + .name = "GPC", + .irq_eoi = irq_chip_eoi_parent, + .irq_mask = imx_gpc_irq_mask, + .irq_unmask = imx_gpc_irq_unmask, + .irq_retrigger = irq_chip_retrigger_hierarchy, + .irq_set_wake = imx_gpc_irq_set_wake, +#ifdef CONFIG_SMP + .irq_set_affinity = irq_chip_set_affinity_parent, +#endif +}; + +static int imx_gpc_domain_xlate(struct irq_domain *domain, + struct device_node *controller, + const u32 *intspec, + unsigned int intsize, + unsigned long *out_hwirq, + unsigned int *out_type) { - struct device_node *np; + if (domain->of_node != controller) + return -EINVAL; /* Shouldn't happen, really... */ + if (intsize != 3) + return -EINVAL; /* Not GIC compliant */ + if (intspec[0] != 0) + return -EINVAL; /* No PPI should point to this domain */ + + *out_hwirq = intspec[1]; + *out_type = intspec[2]; + return 0; +} + +static int imx_gpc_domain_alloc(struct irq_domain *domain, + unsigned int irq, + unsigned int nr_irqs, void *data) +{ + struct of_phandle_args *args = data; + struct of_phandle_args parent_args; + irq_hw_number_t hwirq; int i; - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc"); - gpc_base = of_iomap(np, 0); - WARN_ON(!gpc_base); + if (args->args_count != 3) + return -EINVAL; /* Not GIC compliant */ + if (args->args[0] != 0) + return -EINVAL; /* No PPI should point to this domain */ + + hwirq = args->args[1]; + if (hwirq >= GPC_MAX_IRQS) + return -EINVAL; /* Can't deal with this */ + + for (i = 0; i < nr_irqs; i++) + irq_domain_set_hwirq_and_chip(domain, irq + i, hwirq + i, + &imx_gpc_chip, NULL); + + parent_args = *args; + parent_args.np = domain->parent->of_node; + return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs, &parent_args); +} + +static struct irq_domain_ops imx_gpc_domain_ops = { + .xlate = imx_gpc_domain_xlate, + .alloc = imx_gpc_domain_alloc, + .free = irq_domain_free_irqs_common, +}; + +static int __init imx_gpc_init(struct device_node *node, + struct device_node *parent) +{ + struct irq_domain *parent_domain, *domain; + int i; + + if (!parent) { + pr_err("%s: no parent, giving up\n", node->full_name); + return -ENODEV; + } + + parent_domain = irq_find_host(parent); + if (!parent_domain) { + pr_err("%s: unable to obtain parent domain\n", node->full_name); + return -ENXIO; + } + + gpc_base = of_iomap(node, 0); + if (WARN_ON(!gpc_base)) + return -ENOMEM; + + domain = irq_domain_add_hierarchy(parent_domain, 0, GPC_MAX_IRQS, + node, &imx_gpc_domain_ops, + NULL); + if (!domain) { + iounmap(gpc_base); + return -ENOMEM; + } /* Initially mask all interrupts */ for (i = 0; i < IMR_NUM; i++) writel_relaxed(~0, gpc_base + GPC_IMR1 + i * 4); - /* Register GPC as the secondary interrupt controller behind GIC */ - gic_arch_extn.irq_mask = imx_gpc_irq_mask; - gic_arch_extn.irq_unmask = imx_gpc_irq_unmask; - gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake; + return 0; +} + +/* + * We cannot use the IRQCHIP_DECLARE macro that lives in + * drivers/irqchip, so we're forced to roll our own. Not very nice. + */ +OF_DECLARE_2(irqchip, imx_gpc, "fsl,imx6q-gpc", imx_gpc_init); + +void __init imx_gpc_check_dt(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc"); + if (WARN_ON(!np || + !of_find_property(np, "interrupt-controller", NULL))) + pr_warn("Outdated DT detected, system is about to crash!!!\n"); +} + +#ifdef CONFIG_PM_GENERIC_DOMAINS + +static void _imx6q_pm_pu_power_off(struct generic_pm_domain *genpd) +{ + int iso, iso2sw; + u32 val; + + /* Read ISO and ISO2SW power down delays */ + val = readl_relaxed(gpc_base + GPC_PGC_GPU_PDNSCR); + iso = val & 0x3f; + iso2sw = (val >> 8) & 0x3f; + + /* Gate off PU domain when GPU/VPU when powered down */ + writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN); + + /* Request GPC to power down GPU/VPU */ + val = readl_relaxed(gpc_base + GPC_CNTR); + val |= GPU_VPU_PDN_REQ; + writel_relaxed(val, gpc_base + GPC_CNTR); + + /* Wait ISO + ISO2SW IPG clock cycles */ + ndelay((iso + iso2sw) * 1000 / 66); +} + +static int imx6q_pm_pu_power_off(struct generic_pm_domain *genpd) +{ + struct pu_domain *pu = container_of(genpd, struct pu_domain, base); + + _imx6q_pm_pu_power_off(genpd); + + if (pu->reg) + regulator_disable(pu->reg); + + return 0; +} + +static int imx6q_pm_pu_power_on(struct generic_pm_domain *genpd) +{ + struct pu_domain *pu = container_of(genpd, struct pu_domain, base); + int i, ret, sw, sw2iso; + u32 val; + + if (pu->reg) + ret = regulator_enable(pu->reg); + if (pu->reg && ret) { + pr_err("%s: failed to enable regulator: %d\n", __func__, ret); + return ret; + } + + /* Enable reset clocks for all devices in the PU domain */ + for (i = 0; i < pu->num_clks; i++) + clk_prepare_enable(pu->clk[i]); + + /* Gate off PU domain when GPU/VPU when powered down */ + writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN); + + /* Read ISO and ISO2SW power down delays */ + val = readl_relaxed(gpc_base + GPC_PGC_GPU_PUPSCR); + sw = val & 0x3f; + sw2iso = (val >> 8) & 0x3f; + + /* Request GPC to power up GPU/VPU */ + val = readl_relaxed(gpc_base + GPC_CNTR); + val |= GPU_VPU_PUP_REQ; + writel_relaxed(val, gpc_base + GPC_CNTR); + + /* Wait ISO + ISO2SW IPG clock cycles */ + ndelay((sw + sw2iso) * 1000 / 66); + + /* Disable reset clocks for all devices in the PU domain */ + for (i = 0; i < pu->num_clks; i++) + clk_disable_unprepare(pu->clk[i]); + + return 0; +} + +static struct generic_pm_domain imx6q_arm_domain = { + .name = "ARM", +}; + +static struct pu_domain imx6q_pu_domain = { + .base = { + .name = "PU", + .power_off = imx6q_pm_pu_power_off, + .power_on = imx6q_pm_pu_power_on, + .power_off_latency_ns = 25000, + .power_on_latency_ns = 2000000, + }, +}; + +static struct generic_pm_domain imx6sl_display_domain = { + .name = "DISPLAY", +}; + +static struct generic_pm_domain *imx_gpc_domains[] = { + &imx6q_arm_domain, + &imx6q_pu_domain.base, + &imx6sl_display_domain, +}; + +static struct genpd_onecell_data imx_gpc_onecell_data = { + .domains = imx_gpc_domains, + .num_domains = ARRAY_SIZE(imx_gpc_domains), +}; + +static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg) +{ + struct clk *clk; + bool is_off; + int i; + + imx6q_pu_domain.reg = pu_reg; + + for (i = 0; ; i++) { + clk = of_clk_get(dev->of_node, i); + if (IS_ERR(clk)) + break; + if (i >= GPC_CLK_MAX) { + dev_err(dev, "more than %d clocks\n", GPC_CLK_MAX); + goto clk_err; + } + imx6q_pu_domain.clk[i] = clk; + } + imx6q_pu_domain.num_clks = i; + + is_off = IS_ENABLED(CONFIG_PM); + if (is_off) { + _imx6q_pm_pu_power_off(&imx6q_pu_domain.base); + } else { + /* + * Enable power if compiled without CONFIG_PM in case the + * bootloader disabled it. + */ + imx6q_pm_pu_power_on(&imx6q_pu_domain.base); + } + + pm_genpd_init(&imx6q_pu_domain.base, NULL, is_off); + return of_genpd_add_provider_onecell(dev->of_node, + &imx_gpc_onecell_data); + +clk_err: + while (i--) + clk_put(imx6q_pu_domain.clk[i]); + return -EINVAL; +} + +#else +static inline int imx_gpc_genpd_init(struct device *dev, struct regulator *reg) +{ + return 0; +} +#endif /* CONFIG_PM_GENERIC_DOMAINS */ + +static int imx_gpc_probe(struct platform_device *pdev) +{ + struct regulator *pu_reg; + int ret; + + pu_reg = devm_regulator_get_optional(&pdev->dev, "pu"); + if (PTR_ERR(pu_reg) == -ENODEV) + pu_reg = NULL; + if (IS_ERR(pu_reg)) { + ret = PTR_ERR(pu_reg); + dev_err(&pdev->dev, "failed to get pu regulator: %d\n", ret); + return ret; + } + + return imx_gpc_genpd_init(&pdev->dev, pu_reg); +} + +static const struct of_device_id imx_gpc_dt_ids[] = { + { .compatible = "fsl,imx6q-gpc" }, + { .compatible = "fsl,imx6sl-gpc" }, + { } +}; + +static struct platform_driver imx_gpc_driver = { + .driver = { + .name = "imx-gpc", + .owner = THIS_MODULE, + .of_match_table = imx_gpc_dt_ids, + }, + .probe = imx_gpc_probe, +}; + +static int __init imx_pgc_init(void) +{ + return platform_driver_register(&imx_gpc_driver); } +subsys_initcall(imx_pgc_init); diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h index 66b2b564c463..76af2c03c241 100644 --- a/arch/arm/mach-imx/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -112,7 +112,6 @@ #include "mx21.h" #include "mx27.h" #include "mx1.h" -#include "mx25.h" #define imx_map_entry(soc, name, _type) { \ .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ diff --git a/arch/arm/mach-imx/iomux-mx25.h b/arch/arm/mach-imx/iomux-mx25.h deleted file mode 100644 index be51e838375c..000000000000 --- a/arch/arm/mach-imx/iomux-mx25.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - * arch/arm/plat-mxc/include/mach/iomux-mx25.h - * - * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de> - * - * based on arch/arm/mach-mx25/mx25_pins.h - * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. - * and - * arch/arm/plat-mxc/include/mach/iomux-mx35.h - * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ -#ifndef __MACH_IOMUX_MX25_H__ -#define __MACH_IOMUX_MX25_H__ - -#include "iomux-v3.h" - -/* - * IOMUX/PAD Bit field definitions - */ - -#define MX25_PAD_A10__A10 IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A10__GPIO_4_0 IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_A13__A13 IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A13__GPIO_4_1 IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_A14__A14 IOMUX_PAD(0x230, 0x010, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A14__GPIO_2_0 IOMUX_PAD(0x230, 0x010, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_A15__A15 IOMUX_PAD(0x234, 0x014, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A15__GPIO_2_1 IOMUX_PAD(0x234, 0x014, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_A16__A16 IOMUX_PAD(0x000, 0x018, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A16__GPIO_2_2 IOMUX_PAD(0x000, 0x018, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_A17__A17 IOMUX_PAD(0x238, 0x01c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A17__GPIO_2_3 IOMUX_PAD(0x238, 0x01c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_A18__A18 IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A18__GPIO_2_4 IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A18__FEC_COL IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL) - -#define MX25_PAD_A19__A19 IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A19__FEC_RX_ER IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL) -#define MX25_PAD_A19__GPIO_2_5 IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_A20__A20 IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A20__GPIO_2_6 IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A20__FEC_RDATA2 IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL) - -#define MX25_PAD_A21__A21 IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A21__GPIO_2_7 IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A21__FEC_RDATA3 IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL) - -#define MX25_PAD_A22__A22 IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A22__GPIO_2_8 IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_A23__A23 IOMUX_PAD(0x24c, 0x034, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A23__GPIO_2_9 IOMUX_PAD(0x24c, 0x034, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_A24__A24 IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A24__GPIO_2_10 IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A24__FEC_RX_CLK IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL) - -#define MX25_PAD_A25__A25 IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A25__GPIO_2_11 IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A25__FEC_CRS IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL) - -#define MX25_PAD_EB0__EB0 IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_EB0__AUD4_TXD IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL) -#define MX25_PAD_EB0__GPIO_2_12 IOMUX_PAD(0x258, 0x040, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_EB1__EB1 IOMUX_PAD(0x25c, 0x044, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_EB1__AUD4_RXD IOMUX_PAD(0x25c, 0x044, 0x14, 0x460, 0, NO_PAD_CTRL) -#define MX25_PAD_EB1__GPIO_2_13 IOMUX_PAD(0x25c, 0x044, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_OE__OE IOMUX_PAD(0x260, 0x048, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_OE__AUD4_TXC IOMUX_PAD(0x260, 0x048, 0x14, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_OE__GPIO_2_14 IOMUX_PAD(0x260, 0x048, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CS0__CS0 IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CS0__GPIO_4_2 IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CS1__CS1 IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CS1__NF_CE3 IOMUX_PAD(0x000, 0x050, 0x01, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CS1__GPIO_4_3 IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CS4__CS4 IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CS4__NF_CE1 IOMUX_PAD(0x264, 0x054, 0x01, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CS4__UART5_CTS IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CS4__GPIO_3_20 IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CS5__CS5 IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CS5__NF_CE2 IOMUX_PAD(0x268, 0x058, 0x01, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CS5__UART5_RTS IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL) -#define MX25_PAD_CS5__GPIO_3_21 IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_NF_CE0__NF_CE0 IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_NF_CE0__GPIO_3_22 IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_ECB__ECB IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_ECB__UART5_TXD_MUX IOMUX_PAD(0x270, 0x060, 0x13, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_ECB__GPIO_3_23 IOMUX_PAD(0x270, 0x060, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LBA__LBA IOMUX_PAD(0x274, 0x064, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LBA__UART5_RXD_MUX IOMUX_PAD(0x274, 0x064, 0x13, 0x578, 0, NO_PAD_CTRL) -#define MX25_PAD_LBA__GPIO_3_24 IOMUX_PAD(0x274, 0x064, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_BCLK__BCLK IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_BCLK__GPIO_4_4 IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_RW__RW IOMUX_PAD(0x278, 0x06c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_RW__AUD4_TXFS IOMUX_PAD(0x278, 0x06c, 0x14, 0x474, 0, NO_PAD_CTRL) -#define MX25_PAD_RW__GPIO_3_25 IOMUX_PAD(0x278, 0x06c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_NFWE_B__NFWE_B IOMUX_PAD(0x000, 0x070, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_NFWE_B__GPIO_3_26 IOMUX_PAD(0x000, 0x070, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_NFRE_B__NFRE_B IOMUX_PAD(0x000, 0x074, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_NFRE_B__GPIO_3_27 IOMUX_PAD(0x000, 0x074, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_NFALE__NFALE IOMUX_PAD(0x000, 0x078, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_NFALE__GPIO_3_28 IOMUX_PAD(0x000, 0x078, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_NFCLE__NFCLE IOMUX_PAD(0x000, 0x07c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_NFCLE__GPIO_3_29 IOMUX_PAD(0x000, 0x07c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_NFWP_B__NFWP_B IOMUX_PAD(0x000, 0x080, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_NFWP_B__GPIO_3_30 IOMUX_PAD(0x000, 0x080, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_NFRB__NFRB IOMUX_PAD(0x27c, 0x084, 0x10, 0, 0, PAD_CTL_PKE) -#define MX25_PAD_NFRB__GPIO_3_31 IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D15__D15 IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D15__LD16 IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_D15__GPIO_4_5 IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D14__D14 IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D14__LD17 IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_D14__GPIO_4_6 IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D13__D13 IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D13__LD18 IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_D13__GPIO_4_7 IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D12__D12 IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D12__GPIO_4_8 IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D11__D11 IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D11__GPIO_4_9 IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D10__D10 IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D10__GPIO_4_10 IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D10__USBOTG_OC IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP) - -#define MX25_PAD_D9__D9 IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D9__GPIO_4_11 IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D9__USBH2_PWR IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE) - -#define MX25_PAD_D8__D8 IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D8__GPIO_4_12 IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D8__USBH2_OC IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP) - -#define MX25_PAD_D7__D7 IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D7__GPIO_4_13 IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D6__D6 IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D6__GPIO_4_14 IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D5__D5 IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D5__GPIO_4_15 IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D4__D4 IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D4__GPIO_4_16 IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D3__D3 IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D3__GPIO_4_17 IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D2__D2 IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D2__GPIO_4_18 IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D1__D1 IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D1__GPIO_4_19 IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D0__D0 IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D0__GPIO_4_20 IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD0__LD0 IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD0__CSI_D0 IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL) -#define MX25_PAD_LD0__GPIO_2_15 IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD1__LD1 IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD1__CSI_D1 IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL) -#define MX25_PAD_LD1__GPIO_2_16 IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD2__LD2 IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD2__GPIO_2_17 IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD3__LD3 IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD3__GPIO_2_18 IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD4__LD4 IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD4__GPIO_2_19 IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD5__LD5 IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD5__GPIO_1_19 IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD6__LD6 IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD6__GPIO_1_20 IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD7__LD7 IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD7__GPIO_1_21 IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL) - -#define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL) - -#define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL) - -#define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL) - -#define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL) - -#define MX25_PAD_HSYNC__HSYNC IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_HSYNC__GPIO_1_22 IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_VSYNC__VSYNC IOMUX_PAD(0x304, 0x10c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_VSYNC__GPIO_1_23 IOMUX_PAD(0x304, 0x10c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LSCLK__LSCLK IOMUX_PAD(0x308, 0x110, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LSCLK__GPIO_1_24 IOMUX_PAD(0x308, 0x110, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_OE_ACD__OE_ACD IOMUX_PAD(0x30c, 0x114, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_OE_ACD__GPIO_1_25 IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CONTRAST__CONTRAST IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CONTRAST__PWM4_PWMO IOMUX_PAD(0x310, 0x118, 0x14, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL) - -#define MX25_PAD_PWM__PWM IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_PWM__GPIO_1_26 IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_PWM__USBH2_OC IOMUX_PAD(0x314, 0x11c, 0x16, 0x580, 1, PAD_CTL_PUS_100K_UP) - -#define MX25_PAD_CSI_D2__CSI_D2 IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D2__UART5_RXD_MUX IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL) -#define MX25_PAD_CSI_D2__GPIO_1_27 IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D2__CSPI3_MOSI IOMUX_PAD(0x318, 0x120, 0x17, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_D3__CSI_D3 IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D3__GPIO_1_28 IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D3__CSPI3_MISO IOMUX_PAD(0x31c, 0x124, 0x17, 0x4b4, 1, NO_PAD_CTRL) - -#define MX25_PAD_CSI_D4__CSI_D4 IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D4__UART5_RTS IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL) -#define MX25_PAD_CSI_D4__GPIO_1_29 IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D4__CSPI3_SCLK IOMUX_PAD(0x320, 0x128, 0x17, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_D5__CSI_D5 IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D5__GPIO_1_30 IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D5__CSPI3_RDY IOMUX_PAD(0x324, 0x12c, 0x17, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_D6__CSI_D6 IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D6__GPIO_1_31 IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_D7__CSI_D7 IOMUX_PAD(0x32c, 0x134, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D7__GPIO_1_6 IOMUX_PAD(0x32c, 0x134, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_D8__CSI_D8 IOMUX_PAD(0x330, 0x138, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D8__GPIO_1_7 IOMUX_PAD(0x330, 0x138, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_D9__CSI_D9 IOMUX_PAD(0x334, 0x13c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D9__GPIO_4_21 IOMUX_PAD(0x334, 0x13c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_MCLK__CSI_MCLK IOMUX_PAD(0x338, 0x140, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_MCLK__GPIO_1_8 IOMUX_PAD(0x338, 0x140, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_VSYNC__CSI_VSYNC IOMUX_PAD(0x33c, 0x144, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_VSYNC__GPIO_1_9 IOMUX_PAD(0x33c, 0x144, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_HSYNC__CSI_HSYNC IOMUX_PAD(0x340, 0x148, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_HSYNC__GPIO_1_10 IOMUX_PAD(0x340, 0x148, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK IOMUX_PAD(0x344, 0x14c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 IOMUX_PAD(0x344, 0x14c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_I2C1_CLK__I2C1_CLK IOMUX_PAD(0x348, 0x150, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_I2C1_CLK__GPIO_1_12 IOMUX_PAD(0x348, 0x150, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_I2C1_DAT__I2C1_DAT IOMUX_PAD(0x34c, 0x154, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_I2C1_DAT__GPIO_1_13 IOMUX_PAD(0x34c, 0x154, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x350, 0x158, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 IOMUX_PAD(0x350, 0x158, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x354, 0x15c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSPI1_MISO__GPIO_1_15 IOMUX_PAD(0x354, 0x15c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x358, 0x160, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSPI1_SS0__GPIO_1_16 IOMUX_PAD(0x358, 0x160, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x35c, 0x164, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSPI1_SS1__GPIO_1_17 IOMUX_PAD(0x35c, 0x164, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x360, 0x168, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 IOMUX_PAD(0x360, 0x168, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSPI1_RDY__CSPI1_RDY IOMUX_PAD(0x364, 0x16c, 0x10, 0, 0, PAD_CTL_PKE) -#define MX25_PAD_CSPI1_RDY__GPIO_2_22 IOMUX_PAD(0x364, 0x16c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x368, 0x170, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN) -#define MX25_PAD_UART1_RXD__GPIO_4_22 IOMUX_PAD(0x368, 0x170, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x36c, 0x174, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_UART1_TXD__GPIO_4_23 IOMUX_PAD(0x36c, 0x174, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x370, 0x178, 0x10, 0, 0, PAD_CTL_PUS_100K_UP) -#define MX25_PAD_UART1_RTS__CSI_D0 IOMUX_PAD(0x370, 0x178, 0x11, 0x488, 1, NO_PAD_CTRL) -#define MX25_PAD_UART1_RTS__GPIO_4_24 IOMUX_PAD(0x370, 0x178, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x374, 0x17c, 0x10, 0, 0, PAD_CTL_PUS_100K_UP) -#define MX25_PAD_UART1_CTS__CSI_D1 IOMUX_PAD(0x374, 0x17c, 0x11, 0x48c, 1, NO_PAD_CTRL) -#define MX25_PAD_UART1_CTS__GPIO_4_25 IOMUX_PAD(0x374, 0x17c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x378, 0x180, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_UART2_RXD__GPIO_4_26 IOMUX_PAD(0x378, 0x180, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x37c, 0x184, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_UART2_TXD__GPIO_4_27 IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_UART2_RTS__UART2_RTS IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_UART2_RTS__FEC_COL IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL) -#define MX25_PAD_UART2_RTS__GPIO_4_28 IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_UART2_CTS__FEC_RX_ER IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL) -#define MX25_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_UART2_CTS__GPIO_4_29 IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL) -#define MX25_PAD_SD1_CMD__GPIO_2_23 IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL) -#define MX25_PAD_SD1_CLK__GPIO_2_24 IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_DATA0__GPIO_2_25 IOMUX_PAD(0x390, 0x198, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x394, 0x19c, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_DATA1__AUD7_RXD IOMUX_PAD(0x394, 0x19c, 0x13, 0x478, 0, NO_PAD_CTRL) -#define MX25_PAD_SD1_DATA1__GPIO_2_26 IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL) -#define MX25_PAD_SD1_DATA2__GPIO_2_27 IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL) -#define MX25_PAD_SD1_DATA3__GPIO_2_28 IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL) - -#define KPP_CTL_ROW (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP) -#define KPP_CTL_COL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) - -#define MX25_PAD_KPP_ROW0__KPP_ROW0 IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, KPP_CTL_ROW) -#define MX25_PAD_KPP_ROW0__GPIO_2_29 IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_KPP_ROW1__KPP_ROW1 IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, KPP_CTL_ROW) -#define MX25_PAD_KPP_ROW1__GPIO_2_30 IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_KPP_ROW2__KPP_ROW2 IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, KPP_CTL_ROW) -#define MX25_PAD_KPP_ROW2__CSI_D0 IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL) -#define MX25_PAD_KPP_ROW2__GPIO_2_31 IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_KPP_ROW3__KPP_ROW3 IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, KPP_CTL_ROW) -#define MX25_PAD_KPP_ROW3__CSI_LD1 IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL) -#define MX25_PAD_KPP_ROW3__GPIO_3_0 IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_KPP_COL0__KPP_COL0 IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, KPP_CTL_COL) -#define MX25_PAD_KPP_COL0__UART4_RXD_MUX IOMUX_PAD(0x3b0, 0x1b8, 0x11, 0x570, 1, NO_PAD_CTRL) -#define MX25_PAD_KPP_COL0__AUD5_TXD IOMUX_PAD(0x3b0, 0x1b8, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) -#define MX25_PAD_KPP_COL0__GPIO_3_1 IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_KPP_COL1__KPP_COL1 IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, KPP_CTL_COL) -#define MX25_PAD_KPP_COL1__UART4_TXD_MUX IOMUX_PAD(0x3b4, 0x1bc, 0x11, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_COL1__AUD5_RXD IOMUX_PAD(0x3b4, 0x1bc, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) -#define MX25_PAD_KPP_COL1__GPIO_3_2 IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_KPP_COL2__KPP_COL2 IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, KPP_CTL_COL) -#define MX25_PAD_KPP_COL2__UART4_RTS IOMUX_PAD(0x3b8, 0x1c0, 0x11, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_COL2__AUD5_TXC IOMUX_PAD(0x3b8, 0x1c0, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) -#define MX25_PAD_KPP_COL2__GPIO_3_3 IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_KPP_COL3__KPP_COL3 IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, KPP_CTL_COL) -#define MX25_PAD_KPP_COL3__UART4_CTS IOMUX_PAD(0x3bc, 0x1c4, 0x11, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_COL3__AUD5_TXFS IOMUX_PAD(0x3bc, 0x1c4, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) -#define MX25_PAD_KPP_COL3__GPIO_3_4 IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_MDC__AUD4_TXD IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL) -#define MX25_PAD_FEC_MDC__GPIO_3_5 IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP) -#define MX25_PAD_FEC_MDIO__AUD4_RXD IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL) -#define MX25_PAD_FEC_MDIO__GPIO_3_6 IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_TDATA0__GPIO_3_7 IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_TDATA1__AUD4_TXFS IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL) -#define MX25_PAD_FEC_TDATA1__GPIO_3_8 IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_TX_EN__GPIO_3_9 IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL) -#define MX25_PAD_FEC_RDATA0__GPIO_3_10 IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL) -#define MX25_PAD_FEC_RDATA1__GPIO_3_11 IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL) -#define MX25_PAD_FEC_RX_DV__CAN2_RX IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP) -#define MX25_PAD_FEC_RX_DV__GPIO_3_12 IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x3e0, 0x1e8, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN) -#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 IOMUX_PAD(0x3e0, 0x1e8, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_RTCK__RTCK IOMUX_PAD(0x3e4, 0x1ec, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_RTCK__OWIRE IOMUX_PAD(0x3e4, 0x1ec, 0x11, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_RTCK__GPIO_3_14 IOMUX_PAD(0x3e4, 0x1ec, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_DE_B__DE_B IOMUX_PAD(0x3ec, 0x1f0, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_DE_B__GPIO_2_20 IOMUX_PAD(0x3ec, 0x1f0, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_TDO__TDO IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_GPIO_A__GPIO_A IOMUX_PAD(0x3f0, 0x1f4, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_A__CAN1_TX IOMUX_PAD(0x3f0, 0x1f4, 0x16, 0, 0, PAD_CTL_PUS_22K_UP) -#define MX25_PAD_GPIO_A__USBOTG_PWR IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE) - -#define MX25_PAD_GPIO_B__GPIO_B IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_B__CAN1_RX IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K_UP) -#define MX25_PAD_GPIO_B__USBOTG_OC IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP) - -#define MX25_PAD_GPIO_C__GPIO_C IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_C__CAN2_TX IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP) - -#define MX25_PAD_GPIO_D__GPIO_D IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_E__LD16 IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_GPIO_D__CAN2_RX IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP) - -#define MX25_PAD_GPIO_E__GPIO_E IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_F__LD17 IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_GPIO_E__AUD7_TXD IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_GPIO_F__GPIO_F IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_F__AUD7_TXC IOMUX_PAD(0x404, 0x208, 0x14, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK IOMUX_PAD(0x000, 0x20c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 IOMUX_PAD(0x000, 0x20c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK IOMUX_PAD(0x000, 0x210, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 IOMUX_PAD(0x000, 0x210, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_VSTBY_REQ__VSTBY_REQ IOMUX_PAD(0x408, 0x214, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_VSTBY_REQ__AUD7_TXFS IOMUX_PAD(0x408, 0x214, 0x14, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_VSTBY_REQ__GPIO_3_17 IOMUX_PAD(0x408, 0x214, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_VSTBY_ACK__VSTBY_ACK IOMUX_PAD(0x40c, 0x218, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_VSTBY_ACK__GPIO_3_18 IOMUX_PAD(0x40c, 0x218, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_POWER_FAIL__POWER_FAIL IOMUX_PAD(0x410, 0x21c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_POWER_FAIL__AUD7_RXD IOMUX_PAD(0x410, 0x21c, 0x14, 0x478, 1, NO_PAD_CTRL) -#define MX25_PAD_POWER_FAIL__GPIO_3_19 IOMUX_PAD(0x410, 0x21c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CLKO__CLKO IOMUX_PAD(0x414, 0x220, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CLKO__GPIO_2_21 IOMUX_PAD(0x414, 0x220, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_BOOT_MODE0__GPIO_4_30 IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_BOOT_MODE1__GPIO_4_31 IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CTL_GRP_DVS_MISC IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_FEC IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DVS_JTAG IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_NFC IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_CSI IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_WEIM IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_DDR IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DVS_CRM IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_KPP IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_SDHC1 IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_LCD IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_UART IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DVS_NFC IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DVS_CSI IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_CSPI1 IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DDRTYPE IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DVS_SDHC1 IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DVS_LCD IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL) - -#endif /* __MACH_IOMUX_MX25_H__ */ diff --git a/arch/arm/mach-imx/iomux-mx3.h b/arch/arm/mach-imx/iomux-mx3.h index 0a5adba61e0b..2e4a0ddca76c 100644 --- a/arch/arm/mach-imx/iomux-mx3.h +++ b/arch/arm/mach-imx/iomux-mx3.h @@ -114,7 +114,7 @@ enum iomux_gp_func { */ int mxc_iomux_alloc_pin(unsigned int pin, const char *label); /* - * setups mutliple pins + * setups multiple pins * convenient way to call the above function with tables */ int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count, diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c index d61f9606fc56..a53b2e64f98d 100644 --- a/arch/arm/mach-imx/iomux-v3.c +++ b/arch/arm/mach-imx/iomux-v3.c @@ -56,9 +56,10 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad) return 0; } -int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count) +int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list, + unsigned count) { - iomux_v3_cfg_t *p = pad_list; + const iomux_v3_cfg_t *p = pad_list; int i; int ret; diff --git a/arch/arm/mach-imx/iomux-v3.h b/arch/arm/mach-imx/iomux-v3.h index 2fa3b5430102..f79e165a3b3c 100644 --- a/arch/arm/mach-imx/iomux-v3.h +++ b/arch/arm/mach-imx/iomux-v3.h @@ -128,10 +128,11 @@ typedef u64 iomux_v3_cfg_t; int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad); /* - * setups mutliple pads + * setups multiple pads * convenient way to call the above function with tables */ -int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count); +int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list, + unsigned count); /* * Initialise the iomux controller diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 62a6e02f4763..922ffd6ca039 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -75,7 +75,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { }, }; -static iomux_v3_cfg_t eukrea_cpuimx35_pads[] = { +static const iomux_v3_cfg_t eukrea_cpuimx35_pads[] __initconst = { /* UART1 */ MX35_PAD_CTS1__UART1_CTS, MX35_PAD_RTS1__UART1_RTS, diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c deleted file mode 100644 index b2ee6e009fe4..000000000000 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de> - * Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/memory.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx25.h" -#include "ehci.h" -#include "eukrea-baseboards.h" -#include "hardware.h" -#include "iomux-mx25.h" -#include "mx25.h" - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static iomux_v3_cfg_t eukrea_cpuimx25_pads[] = { - /* FEC - RMII */ - MX25_PAD_FEC_MDC__FEC_MDC, - MX25_PAD_FEC_MDIO__FEC_MDIO, - MX25_PAD_FEC_TDATA0__FEC_TDATA0, - MX25_PAD_FEC_TDATA1__FEC_TDATA1, - MX25_PAD_FEC_TX_EN__FEC_TX_EN, - MX25_PAD_FEC_RDATA0__FEC_RDATA0, - MX25_PAD_FEC_RDATA1__FEC_RDATA1, - MX25_PAD_FEC_RX_DV__FEC_RX_DV, - MX25_PAD_FEC_TX_CLK__FEC_TX_CLK, - /* I2C1 */ - MX25_PAD_I2C1_CLK__I2C1_CLK, - MX25_PAD_I2C1_DAT__I2C1_DAT, -}; - -static const struct fec_platform_data mx25_fec_pdata __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static const struct mxc_nand_platform_data -eukrea_cpuimx25_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -static const struct imxi2c_platform_data -eukrea_cpuimx25_i2c0_data __initconst = { - .bitrate = 100000, -}; - -static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, -}; - -static int eukrea_cpuimx25_otg_init(struct platform_device *pdev) -{ - return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static const struct mxc_usbh_platform_data otg_pdata __initconst = { - .init = eukrea_cpuimx25_otg_init, - .portsc = MXC_EHCI_MODE_UTMI, -}; - -static int eukrea_cpuimx25_usbh2_init(struct platform_device *pdev) -{ - return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | - MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN); -} - -static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { - .init = eukrea_cpuimx25_usbh2_init, - .portsc = MXC_EHCI_MODE_SERIAL, -}; - -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI, - .workaround = FLS_USB2_WORKAROUND_ENGCM09152, -}; - -static bool otg_mode_host __initdata; - -static int __init eukrea_cpuimx25_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", eukrea_cpuimx25_otg_mode); - -static void __init eukrea_cpuimx25_init(void) -{ - imx25_soc_init(); - - if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads, - ARRAY_SIZE(eukrea_cpuimx25_pads))) - printk(KERN_ERR "error setting cpuimx25 pads !\n"); - - imx25_add_imx_uart0(&uart_pdata); - imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info); - imx25_add_imxdi_rtc(); - imx25_add_fec(&mx25_fec_pdata); - imx25_add_imx2_wdt(); - - i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices, - ARRAY_SIZE(eukrea_cpuimx25_i2c_devices)); - imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data); - - if (otg_mode_host) - imx25_add_mxc_ehci_otg(&otg_pdata); - else - imx25_add_fsl_usb2_udc(&otg_device_pdata); - - imx25_add_mxc_ehci_hs(&usbh2_pdata); - -#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD - eukrea_mbimxsd25_baseboard_init(); -#endif -} - -static void __init eukrea_cpuimx25_timer_init(void) -{ - mx25_clocks_init(); -} - -MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25") - /* Maintainer: Eukrea Electromatique */ - .atag_offset = 0x100, - .map_io = mx25_map_io, - .init_early = imx25_init_early, - .init_irq = mx25_init_irq, - .init_time = eukrea_cpuimx25_timer_init, - .init_machine = eukrea_cpuimx25_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/mach-imx25.c index 25defbdb06c4..9379fd0a7b4d 100644 --- a/arch/arm/mach-imx/imx25-dt.c +++ b/arch/arm/mach-imx/mach-imx25.c @@ -10,12 +10,29 @@ */ #include <linux/irq.h> +#include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include "common.h" -#include "mx25.h" +#include "hardware.h" + +static void __init imx25_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX25); +} + +static void __init mx25_init_irq(void) +{ + struct device_node *np; + void __iomem *avic_base; + + np = of_find_compatible_node(NULL, NULL, "fsl,avic"); + avic_base = of_iomap(np, 0); + BUG_ON(!avic_base); + mxc_init_irq(avic_base); +} static const char * const imx25_dt_board_compat[] __initconst = { "fsl,imx25", @@ -23,7 +40,6 @@ static const char * const imx25_dt_board_compat[] __initconst = { }; DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") - .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, .dt_compat = imx25_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 4ad6e473cf83..3ab61549ce0f 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -211,8 +211,9 @@ static void __init imx6q_1588_init(void) * set bit IOMUXC_GPR1[21]. Or the PTP clock must be from pad * (external OSC), and we need to clear the bit. */ - clksel = ptp_clk == enet_ref ? IMX6Q_GPR1_ENET_CLK_SEL_ANATOP : - IMX6Q_GPR1_ENET_CLK_SEL_PAD; + clksel = clk_is_match(ptp_clk, enet_ref) ? + IMX6Q_GPR1_ENET_CLK_SEL_ANATOP : + IMX6Q_GPR1_ENET_CLK_SEL_PAD; gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); if (!IS_ERR(gpr)) regmap_update_bits(gpr, IOMUXC_GPR1, @@ -387,10 +388,10 @@ static void __init imx6q_map_io(void) static void __init imx6q_init_irq(void) { + imx_gpc_check_dt(); imx_init_revision_from_anatop(); imx_init_l2cache(); imx_src_init(); - imx_gpc_init(); irqchip_init(); } diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index 24bfaaf944c8..12a1b098fc6a 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -61,10 +61,10 @@ static void __init imx6sl_init_machine(void) static void __init imx6sl_init_irq(void) { + imx_gpc_check_dt(); imx_init_revision_from_anatop(); imx_init_l2cache(); imx_src_init(); - imx_gpc_init(); irqchip_init(); } diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c index 66988eb6a3a4..f17b7004c24b 100644 --- a/arch/arm/mach-imx/mach-imx6sx.c +++ b/arch/arm/mach-imx/mach-imx6sx.c @@ -81,10 +81,10 @@ static void __init imx6sx_init_machine(void) static void __init imx6sx_init_irq(void) { + imx_gpc_check_dt(); imx_init_revision_from_anatop(); imx_init_l2cache(); imx_src_init(); - imx_gpc_init(); irqchip_init(); } diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c deleted file mode 100644 index 0d01e367b062..000000000000 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ /dev/null @@ -1,270 +0,0 @@ -/* - * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -/* - * This machine is known as: - * - i.MX25 3-Stack Development System - * - i.MX25 Platform Development Kit (i.MX25 PDK) - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/usb/otg.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/memory.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx25.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx25.h" -#include "mx25.h" - -#define MX25PDK_CAN_PWDN IMX_GPIO_NR(4, 6) - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static iomux_v3_cfg_t mx25pdk_pads[] = { - MX25_PAD_FEC_MDC__FEC_MDC, - MX25_PAD_FEC_MDIO__FEC_MDIO, - MX25_PAD_FEC_TDATA0__FEC_TDATA0, - MX25_PAD_FEC_TDATA1__FEC_TDATA1, - MX25_PAD_FEC_TX_EN__FEC_TX_EN, - MX25_PAD_FEC_RDATA0__FEC_RDATA0, - MX25_PAD_FEC_RDATA1__FEC_RDATA1, - MX25_PAD_FEC_RX_DV__FEC_RX_DV, - MX25_PAD_FEC_TX_CLK__FEC_TX_CLK, - MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */ - MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */ - - /* LCD */ - MX25_PAD_LD0__LD0, - MX25_PAD_LD1__LD1, - MX25_PAD_LD2__LD2, - MX25_PAD_LD3__LD3, - MX25_PAD_LD4__LD4, - MX25_PAD_LD5__LD5, - MX25_PAD_LD6__LD6, - MX25_PAD_LD7__LD7, - MX25_PAD_LD8__LD8, - MX25_PAD_LD9__LD9, - MX25_PAD_LD10__LD10, - MX25_PAD_LD11__LD11, - MX25_PAD_LD12__LD12, - MX25_PAD_LD13__LD13, - MX25_PAD_LD14__LD14, - MX25_PAD_LD15__LD15, - MX25_PAD_GPIO_E__LD16, - MX25_PAD_GPIO_F__LD17, - MX25_PAD_HSYNC__HSYNC, - MX25_PAD_VSYNC__VSYNC, - MX25_PAD_LSCLK__LSCLK, - MX25_PAD_OE_ACD__OE_ACD, - MX25_PAD_CONTRAST__CONTRAST, - - /* Keypad */ - MX25_PAD_KPP_ROW0__KPP_ROW0, - MX25_PAD_KPP_ROW1__KPP_ROW1, - MX25_PAD_KPP_ROW2__KPP_ROW2, - MX25_PAD_KPP_ROW3__KPP_ROW3, - MX25_PAD_KPP_COL0__KPP_COL0, - MX25_PAD_KPP_COL1__KPP_COL1, - MX25_PAD_KPP_COL2__KPP_COL2, - MX25_PAD_KPP_COL3__KPP_COL3, - - /* SD1 */ - MX25_PAD_SD1_CMD__SD1_CMD, - MX25_PAD_SD1_CLK__SD1_CLK, - MX25_PAD_SD1_DATA0__SD1_DATA0, - MX25_PAD_SD1_DATA1__SD1_DATA1, - MX25_PAD_SD1_DATA2__SD1_DATA2, - MX25_PAD_SD1_DATA3__SD1_DATA3, - MX25_PAD_A14__GPIO_2_0, /* WriteProtect */ - MX25_PAD_A15__GPIO_2_1, /* CardDetect */ - - /* I2C1 */ - MX25_PAD_I2C1_CLK__I2C1_CLK, - MX25_PAD_I2C1_DAT__I2C1_DAT, - - /* CAN1 */ - MX25_PAD_GPIO_A__CAN1_TX, - MX25_PAD_GPIO_B__CAN1_RX, - MX25_PAD_D14__GPIO_4_6, /* CAN_PWDN */ -}; - -static const struct fec_platform_data mx25_fec_pdata __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -#define FEC_ENABLE_GPIO IMX_GPIO_NR(2, 3) -#define FEC_RESET_B_GPIO IMX_GPIO_NR(4, 8) - -static void __init mx25pdk_fec_reset(void) -{ - gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable"); - gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset"); - - gpio_direction_output(FEC_ENABLE_GPIO, 0); /* drop PHY power */ - gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */ - udelay(2); - - /* turn on PHY power and lift reset */ - gpio_set_value(FEC_ENABLE_GPIO, 1); - gpio_set_value(FEC_RESET_B_GPIO, 1); -} - -static const struct mxc_nand_platform_data -mx25pdk_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -static struct imx_fb_videomode mx25pdk_modes[] = { - { - .mode = { - .name = "CRT-VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39683, - .left_margin = 45, - .right_margin = 114, - .upper_margin = 33, - .lower_margin = 11, - .hsync_len = 1, - .vsync_len = 1, - }, - .bpp = 16, - .pcr = 0xFA208B80, - }, -}; - -static const struct imx_fb_platform_data mx25pdk_fb_pdata __initconst = { - .mode = mx25pdk_modes, - .num_modes = ARRAY_SIZE(mx25pdk_modes), - .pwmr = 0x00A903FF, - .lscr1 = 0x00120300, - .dmacr = 0x00020010, -}; - -static const uint32_t mx25pdk_keymap[] = { - KEY(0, 0, KEY_UP), - KEY(0, 1, KEY_DOWN), - KEY(0, 2, KEY_VOLUMEDOWN), - KEY(0, 3, KEY_HOME), - KEY(1, 0, KEY_RIGHT), - KEY(1, 1, KEY_LEFT), - KEY(1, 2, KEY_ENTER), - KEY(1, 3, KEY_VOLUMEUP), - KEY(2, 0, KEY_F6), - KEY(2, 1, KEY_F8), - KEY(2, 2, KEY_F9), - KEY(2, 3, KEY_F10), - KEY(3, 0, KEY_F1), - KEY(3, 1, KEY_F2), - KEY(3, 2, KEY_F3), - KEY(3, 3, KEY_POWER), -}; - -static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = { - .keymap = mx25pdk_keymap, - .keymap_size = ARRAY_SIZE(mx25pdk_keymap), -}; - -static int mx25pdk_usbh2_init(struct platform_device *pdev) -{ - return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY); -} - -static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { - .init = mx25pdk_usbh2_init, - .portsc = MXC_EHCI_MODE_SERIAL, -}; - -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI, -}; - -static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = { - .bitrate = 100000, -}; - -#define SD1_GPIO_WP IMX_GPIO_NR(2, 0) -#define SD1_GPIO_CD IMX_GPIO_NR(2, 1) - -static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = { - .wp_gpio = SD1_GPIO_WP, - .cd_gpio = SD1_GPIO_CD, - .wp_type = ESDHC_WP_GPIO, - .cd_type = ESDHC_CD_GPIO, -}; - -static void __init mx25pdk_init(void) -{ - imx25_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, - ARRAY_SIZE(mx25pdk_pads)); - - imx25_add_imx_uart0(&uart_pdata); - imx25_add_fsl_usb2_udc(&otg_device_pdata); - imx25_add_mxc_ehci_hs(&usbh2_pdata); - imx25_add_mxc_nand(&mx25pdk_nand_board_info); - imx25_add_imxdi_rtc(); - imx25_add_imx_fb(&mx25pdk_fb_pdata); - imx25_add_imx2_wdt(); - - mx25pdk_fec_reset(); - imx25_add_fec(&mx25_fec_pdata); - imx25_add_imx_keypad(&mx25pdk_keymap_data); - - imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata); - imx25_add_imx_i2c0(&mx25_3ds_i2c0_data); - - gpio_request_one(MX25PDK_CAN_PWDN, GPIOF_OUT_INIT_LOW, "can-pwdn"); - imx25_add_flexcan0(); -} - -static void __init mx25pdk_timer_init(void) -{ - mx25_clocks_init(); -} - -MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") - /* Maintainer: Freescale Semiconductor, Inc. */ - .atag_offset = 0x100, - .map_io = mx25_map_io, - .init_early = imx25_init_early, - .init_irq = mx25_init_irq, - .init_time = mx25pdk_timer_init, - .init_machine = mx25pdk_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 72cd77d21f63..7e315f00648d 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -166,7 +166,7 @@ static struct platform_device *devices[] __initdata = { &mx35pdk_flash, }; -static iomux_v3_cfg_t mx35pdk_pads[] = { +static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = { /* UART1 */ MX35_PAD_CTS1__UART1_CTS, MX35_PAD_RTS1__UART1_RTS, diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index b623bcaca76c..e447e59c0604 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -129,7 +129,7 @@ static struct platform_device *devices[] __initdata = { &pcm043_flash, }; -static iomux_v3_cfg_t pcm043_pads[] = { +static const iomux_v3_cfg_t pcm043_pads[] __initconst = { /* UART1 */ MX35_PAD_CTS1__UART1_CTS, MX35_PAD_RTS1__UART1_RTS, diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index 97836e94451c..27a8f7e3ec08 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -161,7 +161,7 @@ static struct i2c_board_info vpr200_i2c_devices[] = { } }; -static iomux_v3_cfg_t vpr200_pads[] = { +static const iomux_v3_cfg_t vpr200_pads[] __initconst = { /* UART1 */ MX35_PAD_TXD1__UART1_TXD_MUX, MX35_PAD_RXD1__UART1_RXD_MUX, diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c deleted file mode 100644 index 5211f62c624e..000000000000 --- a/arch/arm/mach-imx/mm-imx25.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright (C) 1999,2000 Arm Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - add MX31 specific definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/pinctrl/machine.h> - -#include <asm/pgtable.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices/devices-common.h" -#include "hardware.h" -#include "iomux-v3.h" -#include "mx25.h" - -/* - * This table defines static virtual address mappings for I/O regions. - * These are the mappings common across all MX25 boards. - */ -static struct map_desc mx25_io_desc[] __initdata = { - imx_map_entry(MX25, AVIC, MT_DEVICE_NONSHARED), - imx_map_entry(MX25, AIPS1, MT_DEVICE_NONSHARED), - imx_map_entry(MX25, AIPS2, MT_DEVICE_NONSHARED), -}; - -/* - * This function initializes the memory map. It is called during the - * system startup to create static physical to virtual memory mappings - * for the IO modules. - */ -void __init mx25_map_io(void) -{ - iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc)); -} - -void __init imx25_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MX25); - mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR)); -} - -void __init mx25_init_irq(void) -{ - mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR)); -} - -static struct sdma_platform_data imx25_sdma_pdata __initdata = { - .fw_name = "sdma-imx25.bin", -}; - -static const struct resource imx25_audmux_res[] __initconst = { - DEFINE_RES_MEM(MX25_AUDMUX_BASE_ADDR, SZ_16K), -}; - -void __init imx25_soc_init(void) -{ - mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR)); - mxc_device_init(); - - /* i.mx25 has the i.mx35 type gpio */ - mxc_register_gpio("imx35-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0); - mxc_register_gpio("imx35-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0); - mxc_register_gpio("imx35-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0); - mxc_register_gpio("imx35-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0); - - pinctrl_provide_dummies(); - /* i.mx25 has the i.mx35 type sdma */ - imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata); - /* i.mx25 has the i.mx31 type audmux */ - platform_device_register_simple("imx31-audmux", 0, imx25_audmux_res, - ARRAY_SIZE(imx25_audmux_res)); -} diff --git a/arch/arm/mach-imx/mx25.h b/arch/arm/mach-imx/mx25.h deleted file mode 100644 index ec466400a200..000000000000 --- a/arch/arm/mach-imx/mx25.h +++ /dev/null @@ -1,117 +0,0 @@ -#ifndef __MACH_MX25_H__ -#define __MACH_MX25_H__ - -#define MX25_AIPS1_BASE_ADDR 0x43f00000 -#define MX25_AIPS1_SIZE SZ_1M -#define MX25_AIPS2_BASE_ADDR 0x53f00000 -#define MX25_AIPS2_SIZE SZ_1M -#define MX25_AVIC_BASE_ADDR 0x68000000 -#define MX25_AVIC_SIZE SZ_1M - -#define MX25_I2C1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x80000) -#define MX25_I2C3_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x84000) -#define MX25_CAN1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x88000) -#define MX25_CAN2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x8c000) -#define MX25_I2C2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x98000) -#define MX25_CSPI1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xa4000) -#define MX25_IOMUXC_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xac000) - -#define MX25_CRM_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x80000) -#define MX25_GPT1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x90000) -#define MX25_GPIO4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x9c000) -#define MX25_PWM2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa0000) -#define MX25_GPIO3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa4000) -#define MX25_PWM3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa8000) -#define MX25_PWM4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xc8000) -#define MX25_GPIO1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xcc000) -#define MX25_GPIO2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xd0000) -#define MX25_WDOG_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xdc000) -#define MX25_PWM1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xe0000) - -#define MX25_UART1_BASE_ADDR 0x43f90000 -#define MX25_UART2_BASE_ADDR 0x43f94000 -#define MX25_AUDMUX_BASE_ADDR 0x43fb0000 -#define MX25_UART3_BASE_ADDR 0x5000c000 -#define MX25_UART4_BASE_ADDR 0x50008000 -#define MX25_UART5_BASE_ADDR 0x5002c000 - -#define MX25_CSPI3_BASE_ADDR 0x50004000 -#define MX25_CSPI2_BASE_ADDR 0x50010000 -#define MX25_FEC_BASE_ADDR 0x50038000 -#define MX25_SSI2_BASE_ADDR 0x50014000 -#define MX25_SSI1_BASE_ADDR 0x50034000 -#define MX25_NFC_BASE_ADDR 0xbb000000 -#define MX25_IIM_BASE_ADDR 0x53ff0000 -#define MX25_DRYICE_BASE_ADDR 0x53ffc000 -#define MX25_ESDHC1_BASE_ADDR 0x53fb4000 -#define MX25_ESDHC2_BASE_ADDR 0x53fb8000 -#define MX25_LCDC_BASE_ADDR 0x53fbc000 -#define MX25_KPP_BASE_ADDR 0x43fa8000 -#define MX25_SDMA_BASE_ADDR 0x53fd4000 -#define MX25_USB_BASE_ADDR 0x53ff4000 -#define MX25_USB_OTG_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0000) -/* - * The reference manual (IMX25RM, Rev. 1, 06/2009) specifies an offset of 0x200 - * for the host controller. Early documentation drafts specified 0x400 and - * Freescale internal sources confirm only the latter value to work. - */ -#define MX25_USB_HS_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0400) -#define MX25_CSI_BASE_ADDR 0x53ff8000 - -#define MX25_IO_P2V(x) IMX_IO_P2V(x) -#define MX25_IO_ADDRESS(x) IOMEM(MX25_IO_P2V(x)) - -/* - * Interrupt numbers - */ -#include <asm/irq.h> -#define MX25_INT_CSPI3 (NR_IRQS_LEGACY + 0) -#define MX25_INT_I2C1 (NR_IRQS_LEGACY + 3) -#define MX25_INT_I2C2 (NR_IRQS_LEGACY + 4) -#define MX25_INT_UART4 (NR_IRQS_LEGACY + 5) -#define MX25_INT_ESDHC2 (NR_IRQS_LEGACY + 8) -#define MX25_INT_ESDHC1 (NR_IRQS_LEGACY + 9) -#define MX25_INT_I2C3 (NR_IRQS_LEGACY + 10) -#define MX25_INT_SSI2 (NR_IRQS_LEGACY + 11) -#define MX25_INT_SSI1 (NR_IRQS_LEGACY + 12) -#define MX25_INT_CSPI2 (NR_IRQS_LEGACY + 13) -#define MX25_INT_CSPI1 (NR_IRQS_LEGACY + 14) -#define MX25_INT_GPIO3 (NR_IRQS_LEGACY + 16) -#define MX25_INT_CSI (NR_IRQS_LEGACY + 17) -#define MX25_INT_UART3 (NR_IRQS_LEGACY + 18) -#define MX25_INT_GPIO4 (NR_IRQS_LEGACY + 23) -#define MX25_INT_KPP (NR_IRQS_LEGACY + 24) -#define MX25_INT_DRYICE (NR_IRQS_LEGACY + 25) -#define MX25_INT_PWM1 (NR_IRQS_LEGACY + 26) -#define MX25_INT_UART2 (NR_IRQS_LEGACY + 32) -#define MX25_INT_NFC (NR_IRQS_LEGACY + 33) -#define MX25_INT_SDMA (NR_IRQS_LEGACY + 34) -#define MX25_INT_USB_HS (NR_IRQS_LEGACY + 35) -#define MX25_INT_PWM2 (NR_IRQS_LEGACY + 36) -#define MX25_INT_USB_OTG (NR_IRQS_LEGACY + 37) -#define MX25_INT_LCDC (NR_IRQS_LEGACY + 39) -#define MX25_INT_UART5 (NR_IRQS_LEGACY + 40) -#define MX25_INT_PWM3 (NR_IRQS_LEGACY + 41) -#define MX25_INT_PWM4 (NR_IRQS_LEGACY + 42) -#define MX25_INT_CAN1 (NR_IRQS_LEGACY + 43) -#define MX25_INT_CAN2 (NR_IRQS_LEGACY + 44) -#define MX25_INT_UART1 (NR_IRQS_LEGACY + 45) -#define MX25_INT_GPIO2 (NR_IRQS_LEGACY + 51) -#define MX25_INT_GPIO1 (NR_IRQS_LEGACY + 52) -#define MX25_INT_GPT1 (NR_IRQS_LEGACY + 54) -#define MX25_INT_FEC (NR_IRQS_LEGACY + 57) - -#define MX25_DMA_REQ_SSI2_RX1 22 -#define MX25_DMA_REQ_SSI2_TX1 23 -#define MX25_DMA_REQ_SSI2_RX0 24 -#define MX25_DMA_REQ_SSI2_TX0 25 -#define MX25_DMA_REQ_SSI1_RX1 26 -#define MX25_DMA_REQ_SSI1_TX1 27 -#define MX25_DMA_REQ_SSI1_RX0 28 -#define MX25_DMA_REQ_SSI1_TX0 29 - -#ifndef __ASSEMBLY__ -extern int mx25_revision(void); -#endif - -#endif /* ifndef __MACH_MX25_H__ */ diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 46fd695203c7..6a7c6fc780cc 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -310,10 +310,12 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) * Low-Power mode. * 3) Software should mask IRQ #32 right after CCM Low-Power mode * is set (set bits 0-1 of CCM_CLPCR). + * + * Note that IRQ #32 is GIC SPI #0. */ - imx_gpc_hwirq_unmask(32); + imx_gpc_hwirq_unmask(0); writel_relaxed(val, ccm_base + CLPCR); - imx_gpc_hwirq_mask(32); + imx_gpc_hwirq_mask(0); return 0; } diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig index f7e463ca0287..9f59e58da3a4 100644 --- a/arch/arm/mach-mediatek/Kconfig +++ b/arch/arm/mach-mediatek/Kconfig @@ -1,6 +1,7 @@ menuconfig ARCH_MEDIATEK bool "Mediatek MT65xx & MT81xx SoC" if ARCH_MULTI_V7 select ARM_GIC + select PINCTRL select MTK_TIMER help Support for Mediatek MT65xx & MT81xx SoCs diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index 18301dc9d2e7..0743e2059645 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -1,8 +1,11 @@ menuconfig ARCH_MESON bool "Amlogic Meson SoCs" if ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB select GENERIC_IRQ_CHIP select ARM_GIC select CACHE_L2X0 + select PINCTRL + select PINCTRL_MESON if ARCH_MESON diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig deleted file mode 100644 index a6b50e62a495..000000000000 --- a/arch/arm/mach-msm/Kconfig +++ /dev/null @@ -1,109 +0,0 @@ -if ARCH_MSM - -choice - prompt "Qualcomm MSM SoC Type" - default ARCH_MSM7X00A - depends on ARCH_MSM - -config ARCH_MSM7X00A - bool "MSM7x00A / MSM7x01A" - select ARCH_MSM_ARM11 - select CPU_V6 - select GPIO_MSM_V1 - select MACH_TROUT if !MACH_HALIBUT - select MSM_PROC_COMM - select MSM_SMD - select CLKSRC_QCOM - select MSM_SMD_PKG3 - -config ARCH_MSM7X30 - bool "MSM7x30" - select ARCH_MSM_SCORPION - select CPU_V7 - select GPIO_MSM_V1 - select MACH_MSM7X30_SURF # if ! - select MSM_GPIOMUX - select MSM_PROC_COMM - select MSM_SMD - select CLKSRC_QCOM - select MSM_VIC - -config ARCH_QSD8X50 - bool "QSD8X50" - select ARCH_MSM_SCORPION - select CPU_V7 - select GPIO_MSM_V1 - select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5 - select MSM_GPIOMUX - select MSM_PROC_COMM - select MSM_SMD - select CLKSRC_QCOM - select MSM_VIC - -endchoice - -config MSM_SOC_REV_A - bool - -config ARCH_MSM_ARM11 - bool - -config ARCH_MSM_SCORPION - bool - -config MSM_VIC - bool - -menu "Qualcomm MSM Board Type" - depends on ARCH_MSM - -config MACH_HALIBUT - depends on ARCH_MSM - depends on ARCH_MSM7X00A - bool "Halibut Board (QCT SURF7201A)" - help - Support for the Qualcomm SURF7201A eval board. - -config MACH_TROUT - depends on ARCH_MSM - depends on ARCH_MSM7X00A - bool "HTC Dream (aka trout)" - help - Support for the HTC Dream, T-Mobile G1, Android ADP1 devices. - -config MACH_MSM7X30_SURF - depends on ARCH_MSM7X30 - bool "MSM7x30 SURF" - help - Support for the Qualcomm MSM7x30 SURF eval board. - -config MACH_QSD8X50_SURF - depends on ARCH_QSD8X50 - bool "QSD8x50 SURF" - help - Support for the Qualcomm QSD8x50 SURF eval board. - -config MACH_QSD8X50A_ST1_5 - depends on ARCH_QSD8X50 - bool "QSD8x50A ST1.5" - select MSM_SOC_REV_A - help - Support for the Qualcomm ST1.5. - -endmenu - -config MSM_SMD_PKG3 - bool - -config MSM_PROC_COMM - bool - -config MSM_SMD - bool - -config MSM_GPIOMUX - bool - help - Support for MSM V1 TLMM GPIOMUX architecture. - -endif diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile deleted file mode 100644 index 27c078a568df..000000000000 --- a/arch/arm/mach-msm/Makefile +++ /dev/null @@ -1,23 +0,0 @@ -obj-$(CONFIG_MSM_PROC_COMM) += clock.o - -obj-$(CONFIG_MSM_VIC) += irq-vic.o - -obj-$(CONFIG_ARCH_MSM7X00A) += irq.o -obj-$(CONFIG_ARCH_QSD8X50) += sirc.o - -obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o - -obj-$(CONFIG_ARCH_MSM7X00A) += dma.o io.o -obj-$(CONFIG_ARCH_MSM7X30) += dma.o io.o -obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o - -obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o -obj-$(CONFIG_MSM_SMD) += last_radio_log.o - -obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o -obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o -obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o -obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o -obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o -obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o -obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot deleted file mode 100644 index 9b803a578b4d..000000000000 --- a/arch/arm/mach-msm/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x10008000 -params_phys-y := 0x10000100 -initrd_phys-y := 0x10800000 diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c deleted file mode 100644 index 61bfe584a9d7..000000000000 --- a/arch/arm/mach-msm/board-halibut.c +++ /dev/null @@ -1,104 +0,0 @@ -/* linux/arch/arm/mach-msm/board-halibut.c - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/delay.h> - -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> -#include <asm/setup.h> - -#include <mach/irqs.h> -#include <mach/msm_iomap.h> - -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> - -#include "devices.h" -#include "common.h" - -static struct resource smc91x_resources[] = { - [0] = { - .start = 0x9C004300, - .end = 0x9C004400, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MSM_GPIO_TO_INT(49), - .end = MSM_GPIO_TO_INT(49), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct platform_device *devices[] __initdata = { - &msm_clock_7x01a, - &msm_device_gpio_7201, - &msm_device_uart3, - &msm_device_smd, - &msm_device_nand, - &msm_device_hsusb, - &msm_device_i2c, - &smc91x_device, -}; - -static void __init halibut_init_early(void) -{ - arch_ioremap_caller = __msm_ioremap_caller; -} - -static void __init halibut_init_irq(void) -{ - msm_init_irq(); -} - -static void __init halibut_init(void) -{ - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init halibut_map_io(void) -{ - msm_map_common_io(); -} - -static void __init halibut_init_late(void) -{ - smd_debugfs_init(); -} - -MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)") - .atag_offset = 0x100, - .map_io = halibut_map_io, - .init_early = halibut_init_early, - .init_irq = halibut_init_irq, - .init_machine = halibut_init, - .init_late = halibut_init_late, - .init_time = msm7x01_timer_init, -MACHINE_END diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c deleted file mode 100644 index 8f5ecdc4f3ce..000000000000 --- a/arch/arm/mach-msm/board-msm7x30.c +++ /dev/null @@ -1,191 +0,0 @@ -/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/smsc911x.h> -#include <linux/usb/msm_hsusb.h> -#include <linux/clkdev.h> -#include <linux/memblock.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/memory.h> -#include <asm/setup.h> - -#include <mach/clk.h> -#include <mach/msm_iomap.h> -#include <mach/dma.h> - -#include <mach/vreg.h> -#include "devices.h" -#include "gpiomux.h" -#include "proc_comm.h" -#include "common.h" - -static void __init msm7x30_fixup(struct tag *tag, char **cmdline) -{ - for (; tag->hdr.size; tag = tag_next(tag)) - if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) { - tag->u.mem.start = 0; - tag->u.mem.size += SZ_2M; - } -} - -static void __init msm7x30_reserve(void) -{ - memblock_remove(0x0, SZ_2M); -} - -static int hsusb_phy_init_seq[] = { - 0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */ - 0x02, 0x36, /* Disable CDR Auto Reset feature */ - -1 -}; - -static int hsusb_link_clk_reset(struct clk *link_clk, bool assert) -{ - int ret; - - if (assert) { - ret = clk_reset(link_clk, CLK_RESET_ASSERT); - if (ret) - pr_err("usb hs_clk assert failed\n"); - } else { - ret = clk_reset(link_clk, CLK_RESET_DEASSERT); - if (ret) - pr_err("usb hs_clk deassert failed\n"); - } - return ret; -} - -static int hsusb_phy_clk_reset(struct clk *phy_clk) -{ - int ret; - - ret = clk_reset(phy_clk, CLK_RESET_ASSERT); - if (ret) { - pr_err("usb phy clk assert failed\n"); - return ret; - } - usleep_range(10000, 12000); - ret = clk_reset(phy_clk, CLK_RESET_DEASSERT); - if (ret) - pr_err("usb phy clk deassert failed\n"); - return ret; -} - -static struct msm_otg_platform_data msm_otg_pdata = { - .phy_init_seq = hsusb_phy_init_seq, - .mode = USB_DR_MODE_PERIPHERAL, - .otg_control = OTG_PHY_CONTROL, - .link_clk_reset = hsusb_link_clk_reset, - .phy_clk_reset = hsusb_phy_clk_reset, -}; - -struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { -#ifdef CONFIG_SERIAL_MSM_CONSOLE - [49] = { /* UART2 RFR */ - .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | - GPIOMUX_FUNC_2 | GPIOMUX_VALID, - }, - [50] = { /* UART2 CTS */ - .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | - GPIOMUX_FUNC_2 | GPIOMUX_VALID, - }, - [51] = { /* UART2 RX */ - .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | - GPIOMUX_FUNC_2 | GPIOMUX_VALID, - }, - [52] = { /* UART2 TX */ - .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | - GPIOMUX_FUNC_2 | GPIOMUX_VALID, - }, -#endif -}; - -static struct platform_device *devices[] __initdata = { - &msm_clock_7x30, - &msm_device_gpio_7x30, -#if defined(CONFIG_SERIAL_MSM) - &msm_device_uart2, -#endif - &msm_device_smd, - &msm_device_otg, - &msm_device_hsusb, - &msm_device_hsusb_host, -}; - -static void __init msm7x30_init_irq(void) -{ - msm_init_irq(); -} - -static void __init msm7x30_init(void) -{ - msm_device_otg.dev.platform_data = &msm_otg_pdata; - msm_device_hsusb.dev.parent = &msm_device_otg.dev; - msm_device_hsusb_host.dev.parent = &msm_device_otg.dev; - - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init msm7x30_map_io(void) -{ - msm_map_msm7x30_io(); -} - -static void __init msm7x30_init_late(void) -{ - smd_debugfs_init(); -} - -MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") - .atag_offset = 0x100, - .fixup = msm7x30_fixup, - .reserve = msm7x30_reserve, - .map_io = msm7x30_map_io, - .init_irq = msm7x30_init_irq, - .init_machine = msm7x30_init, - .init_late = msm7x30_init_late, - .init_time = msm7x30_timer_init, -MACHINE_END - -MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") - .atag_offset = 0x100, - .fixup = msm7x30_fixup, - .reserve = msm7x30_reserve, - .map_io = msm7x30_map_io, - .init_irq = msm7x30_init_irq, - .init_machine = msm7x30_init, - .init_late = msm7x30_init_late, - .init_time = msm7x30_timer_init, -MACHINE_END - -MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") - .atag_offset = 0x100, - .fixup = msm7x30_fixup, - .reserve = msm7x30_reserve, - .map_io = msm7x30_map_io, - .init_irq = msm7x30_init_irq, - .init_machine = msm7x30_init, - .init_late = msm7x30_init_late, - .init_time = msm7x30_timer_init, -MACHINE_END diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c deleted file mode 100644 index 4c748616ef47..000000000000 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ /dev/null @@ -1,248 +0,0 @@ -/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/usb/msm_hsusb.h> -#include <linux/err.h> -#include <linux/clkdev.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/io.h> -#include <asm/setup.h> - -#include <mach/irqs.h> -#include <mach/sirc.h> -#include <mach/vreg.h> -#include <mach/clk.h> -#include <linux/platform_data/mmc-msm_sdcc.h> - -#include "devices.h" -#include "common.h" - -static const resource_size_t qsd8x50_surf_smc91x_base __initconst = 0x70000300; -static const unsigned qsd8x50_surf_smc91x_gpio __initconst = 156; - -/* Leave smc91x resources empty here, as we'll fill them in - * at run-time: they vary from board to board, and the true - * configuration won't be known until boot. - */ -static struct resource smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static int __init msm_init_smc91x(void) -{ - if (machine_is_qsd8x50_surf()) { - smc91x_resources[0].start = qsd8x50_surf_smc91x_base; - smc91x_resources[0].end = qsd8x50_surf_smc91x_base + 0xff; - smc91x_resources[1].start = - gpio_to_irq(qsd8x50_surf_smc91x_gpio); - smc91x_resources[1].end = - gpio_to_irq(qsd8x50_surf_smc91x_gpio); - platform_device_register(&smc91x_device); - } - - return 0; -} -module_init(msm_init_smc91x); - -static int hsusb_phy_init_seq[] = { - 0x08, 0x31, /* Increase HS Driver Amplitude */ - 0x20, 0x32, /* Enable and set Pre-Emphasis Depth to 10% */ - -1 -}; - -static int hsusb_link_clk_reset(struct clk *link_clk, bool assert) -{ - int ret; - - if (assert) { - ret = clk_reset(link_clk, CLK_RESET_ASSERT); - if (ret) - pr_err("usb hs_clk assert failed\n"); - } else { - ret = clk_reset(link_clk, CLK_RESET_DEASSERT); - if (ret) - pr_err("usb hs_clk deassert failed\n"); - } - return ret; -} - -static int hsusb_phy_clk_reset(struct clk *phy_clk) -{ - int ret; - - ret = clk_reset(phy_clk, CLK_RESET_ASSERT); - if (ret) { - pr_err("usb phy clk assert failed\n"); - return ret; - } - usleep_range(10000, 12000); - ret = clk_reset(phy_clk, CLK_RESET_DEASSERT); - if (ret) - pr_err("usb phy clk deassert failed\n"); - return ret; -} - -static struct msm_otg_platform_data msm_otg_pdata = { - .phy_init_seq = hsusb_phy_init_seq, - .mode = USB_DR_MODE_PERIPHERAL, - .otg_control = OTG_PHY_CONTROL, - .link_clk_reset = hsusb_link_clk_reset, - .phy_clk_reset = hsusb_phy_clk_reset, -}; - -static struct platform_device *devices[] __initdata = { - &msm_clock_8x50, - &msm_device_gpio_8x50, - &msm_device_uart3, - &msm_device_smd, - &msm_device_otg, - &msm_device_hsusb, - &msm_device_hsusb_host, -}; - -static struct msm_mmc_gpio sdc1_gpio_cfg[] = { - {51, "sdc1_dat_3"}, - {52, "sdc1_dat_2"}, - {53, "sdc1_dat_1"}, - {54, "sdc1_dat_0"}, - {55, "sdc1_cmd"}, - {56, "sdc1_clk"} -}; - -static struct vreg *vreg_mmc; -static unsigned long vreg_sts; - -static uint32_t msm_sdcc_setup_power(struct device *dv, unsigned int vdd) -{ - int rc = 0; - struct platform_device *pdev; - - pdev = container_of(dv, struct platform_device, dev); - - if (vdd == 0) { - if (!vreg_sts) - return 0; - - clear_bit(pdev->id, &vreg_sts); - - if (!vreg_sts) { - rc = vreg_disable(vreg_mmc); - if (rc) - pr_err("vreg_mmc disable failed for slot " - "%d: %d\n", pdev->id, rc); - } - return 0; - } - - if (!vreg_sts) { - rc = vreg_set_level(vreg_mmc, 2900); - if (rc) - pr_err("vreg_mmc set level failed for slot %d: %d\n", - pdev->id, rc); - rc = vreg_enable(vreg_mmc); - if (rc) - pr_err("vreg_mmc enable failed for slot %d: %d\n", - pdev->id, rc); - } - set_bit(pdev->id, &vreg_sts); - return 0; -} - -static struct msm_mmc_gpio_data sdc1_gpio = { - .gpio = sdc1_gpio_cfg, - .size = ARRAY_SIZE(sdc1_gpio_cfg), -}; - -static struct msm_mmc_platform_data qsd8x50_sdc1_data = { - .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, - .translate_vdd = msm_sdcc_setup_power, - .gpio_data = &sdc1_gpio, -}; - -static void __init qsd8x50_init_mmc(void) -{ - vreg_mmc = vreg_get(NULL, "gp5"); - - if (IS_ERR(vreg_mmc)) { - pr_err("vreg get for vreg_mmc failed (%ld)\n", - PTR_ERR(vreg_mmc)); - return; - } - - msm_add_sdcc(1, &qsd8x50_sdc1_data, 0, 0); -} - -static void __init qsd8x50_map_io(void) -{ - msm_map_qsd8x50_io(); -} - -static void __init qsd8x50_init_irq(void) -{ - msm_init_irq(); - msm_init_sirc(); -} - -static void __init qsd8x50_init(void) -{ - msm_device_otg.dev.platform_data = &msm_otg_pdata; - msm_device_hsusb.dev.parent = &msm_device_otg.dev; - msm_device_hsusb_host.dev.parent = &msm_device_otg.dev; - platform_add_devices(devices, ARRAY_SIZE(devices)); - qsd8x50_init_mmc(); -} - -static void __init qsd8x50_init_late(void) -{ - smd_debugfs_init(); -} - -MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") - .atag_offset = 0x100, - .map_io = qsd8x50_map_io, - .init_irq = qsd8x50_init_irq, - .init_machine = qsd8x50_init, - .init_late = qsd8x50_init_late, - .init_time = qsd8x50_timer_init, -MACHINE_END - -MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") - .atag_offset = 0x100, - .map_io = qsd8x50_map_io, - .init_irq = qsd8x50_init_irq, - .init_machine = qsd8x50_init, - .init_late = qsd8x50_init_late, - .init_time = qsd8x50_timer_init, -MACHINE_END diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c deleted file mode 100644 index e50967926dcd..000000000000 --- a/arch/arm/mach-msm/board-sapphire.c +++ /dev/null @@ -1,114 +0,0 @@ -/* linux/arch/arm/mach-msm/board-sapphire.c - * Copyright (C) 2007-2009 HTC Corporation. - * Author: Thomas Tsai <thomas_tsai@htc.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. -*/ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/device.h> - -#include <linux/delay.h> - -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> -#include <mach/vreg.h> - -#include <asm/io.h> -#include <asm/delay.h> -#include <asm/setup.h> - -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> -#include <linux/memblock.h> - -#include "gpio_chip.h" -#include "board-sapphire.h" -#include "proc_comm.h" -#include "devices.h" -#include "common.h" - -void msm_init_irq(void); -void msm_init_gpio(void); - -static struct platform_device *devices[] __initdata = { - &msm_device_smd, - &msm_device_dmov, - &msm_device_nand, - &msm_device_uart1, - &msm_device_uart3, -}; - -void msm_timer_init(void); - -static void __init sapphire_init_irq(void) -{ - msm_init_irq(); -} - -static void __init sapphire_init(void) -{ - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static struct map_desc sapphire_io_desc[] __initdata = { - { - .virtual = SAPPHIRE_CPLD_BASE, - .pfn = __phys_to_pfn(SAPPHIRE_CPLD_START), - .length = SAPPHIRE_CPLD_SIZE, - .type = MT_DEVICE_NONSHARED - } -}; - -static void __init sapphire_fixup(struct tag *tags, char **cmdline) -{ - int smi_sz = parse_tag_smi((const struct tag *)tags); - - if (smi_sz == 32) { - memblock_add(PHYS_OFFSET, 84*SZ_1M); - } else if (smi_sz == 64) { - memblock_add(PHYS_OFFSET, 101*SZ_1M); - } else { - memblock_add(PHYS_OFFSET, 101*SZ_1M); - /* Give a default value when not get smi size */ - smi_sz = 64; - } -} - -static void __init sapphire_map_io(void) -{ - msm_map_common_io(); - iotable_init(sapphire_io_desc, ARRAY_SIZE(sapphire_io_desc)); - msm_clock_init(); -} - -static void __init sapphire_init_late(void) -{ - smd_debugfs_init(); -} - -MACHINE_START(SAPPHIRE, "sapphire") -/* Maintainer: Brian Swetland <swetland@google.com> */ - .atag_offset = 0x100, - .fixup = sapphire_fixup, - .map_io = sapphire_map_io, - .init_irq = sapphire_init_irq, - .init_machine = sapphire_init, - .init_late = sapphire_init_late, - .init_time = msm_timer_init, -MACHINE_END diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c deleted file mode 100644 index 722ad63b7edc..000000000000 --- a/arch/arm/mach-msm/board-trout-gpio.c +++ /dev/null @@ -1,233 +0,0 @@ -/* - * linux/arch/arm/mach-msm/gpio.c - * - * Copyright (C) 2005 HP Labs - * Copyright (C) 2008 Google, Inc. - * Copyright (C) 2009 Pavel Machek <pavel@ucw.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/gpio.h> - -#include "board-trout.h" - -static uint8_t trout_int_mask[2] = { - [0] = 0xff, /* mask all interrupts */ - [1] = 0xff, -}; -static uint8_t trout_sleep_int_mask[] = { - [0] = 0xff, - [1] = 0xff, -}; - -struct msm_gpio_chip { - struct gpio_chip chip; - void __iomem *reg; /* Base of register bank */ - u8 shadow; -}; - -#define to_msm_gpio_chip(c) container_of(c, struct msm_gpio_chip, chip) - -static int msm_gpiolib_get(struct gpio_chip *chip, unsigned offset) -{ - struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip); - unsigned mask = 1 << offset; - - return !!(readb(msm_gpio->reg) & mask); -} - -static void msm_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val) -{ - struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip); - unsigned mask = 1 << offset; - - if (val) - msm_gpio->shadow |= mask; - else - msm_gpio->shadow &= ~mask; - - writeb(msm_gpio->shadow, msm_gpio->reg); -} - -static int msm_gpiolib_direction_input(struct gpio_chip *chip, - unsigned offset) -{ - msm_gpiolib_set(chip, offset, 0); - return 0; -} - -static int msm_gpiolib_direction_output(struct gpio_chip *chip, - unsigned offset, int val) -{ - msm_gpiolib_set(chip, offset, val); - return 0; -} - -static int trout_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - return TROUT_GPIO_TO_INT(offset + chip->base); -} - -#define TROUT_GPIO_BANK(name, reg_num, base_gpio, shadow_val) \ - { \ - .chip = { \ - .label = name, \ - .direction_input = msm_gpiolib_direction_input,\ - .direction_output = msm_gpiolib_direction_output, \ - .get = msm_gpiolib_get, \ - .set = msm_gpiolib_set, \ - .to_irq = trout_gpio_to_irq, \ - .base = base_gpio, \ - .ngpio = 8, \ - }, \ - .reg = reg_num + TROUT_CPLD_BASE, \ - .shadow = shadow_val, \ - } - -static struct msm_gpio_chip msm_gpio_banks[] = { -#if defined(CONFIG_DEBUG_MSM_UART) && (CONFIG_DEBUG_UART_PHYS == 0xa9a00000) - /* H2W pins <-> UART1 */ - TROUT_GPIO_BANK("MISC2", 0x00, TROUT_GPIO_MISC2_BASE, 0x40), -#else - /* H2W pins <-> UART3, Bluetooth <-> UART1 */ - TROUT_GPIO_BANK("MISC2", 0x00, TROUT_GPIO_MISC2_BASE, 0x80), -#endif - /* I2C pull */ - TROUT_GPIO_BANK("MISC3", 0x02, TROUT_GPIO_MISC3_BASE, 0x04), - TROUT_GPIO_BANK("MISC4", 0x04, TROUT_GPIO_MISC4_BASE, 0), - /* mmdi 32k en */ - TROUT_GPIO_BANK("MISC5", 0x06, TROUT_GPIO_MISC5_BASE, 0x04), - TROUT_GPIO_BANK("INT2", 0x08, TROUT_GPIO_INT2_BASE, 0), - TROUT_GPIO_BANK("MISC1", 0x0a, TROUT_GPIO_MISC1_BASE, 0), - TROUT_GPIO_BANK("VIRTUAL", 0x12, TROUT_GPIO_VIRTUAL_BASE, 0), -}; - -static void trout_gpio_irq_ack(struct irq_data *d) -{ - int bank = TROUT_INT_TO_BANK(d->irq); - uint8_t mask = TROUT_INT_TO_MASK(d->irq); - int reg = TROUT_BANK_TO_STAT_REG(bank); - /*printk(KERN_INFO "trout_gpio_irq_ack irq %d\n", d->irq);*/ - writeb(mask, TROUT_CPLD_BASE + reg); -} - -static void trout_gpio_irq_mask(struct irq_data *d) -{ - unsigned long flags; - uint8_t reg_val; - int bank = TROUT_INT_TO_BANK(d->irq); - uint8_t mask = TROUT_INT_TO_MASK(d->irq); - int reg = TROUT_BANK_TO_MASK_REG(bank); - - local_irq_save(flags); - reg_val = trout_int_mask[bank] |= mask; - /*printk(KERN_INFO "trout_gpio_irq_mask irq %d => %d:%02x\n", - d->irq, bank, reg_val);*/ - writeb(reg_val, TROUT_CPLD_BASE + reg); - local_irq_restore(flags); -} - -static void trout_gpio_irq_unmask(struct irq_data *d) -{ - unsigned long flags; - uint8_t reg_val; - int bank = TROUT_INT_TO_BANK(d->irq); - uint8_t mask = TROUT_INT_TO_MASK(d->irq); - int reg = TROUT_BANK_TO_MASK_REG(bank); - - local_irq_save(flags); - reg_val = trout_int_mask[bank] &= ~mask; - /*printk(KERN_INFO "trout_gpio_irq_unmask irq %d => %d:%02x\n", - d->irq, bank, reg_val);*/ - writeb(reg_val, TROUT_CPLD_BASE + reg); - local_irq_restore(flags); -} - -int trout_gpio_irq_set_wake(struct irq_data *d, unsigned int on) -{ - unsigned long flags; - int bank = TROUT_INT_TO_BANK(d->irq); - uint8_t mask = TROUT_INT_TO_MASK(d->irq); - - local_irq_save(flags); - if(on) - trout_sleep_int_mask[bank] &= ~mask; - else - trout_sleep_int_mask[bank] |= mask; - local_irq_restore(flags); - return 0; -} - -static void trout_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - int j, m; - unsigned v; - int bank; - int stat_reg; - int int_base = TROUT_INT_START; - uint8_t int_mask; - - for (bank = 0; bank < 2; bank++) { - stat_reg = TROUT_BANK_TO_STAT_REG(bank); - v = readb(TROUT_CPLD_BASE + stat_reg); - int_mask = trout_int_mask[bank]; - if (v & int_mask) { - writeb(v & int_mask, TROUT_CPLD_BASE + stat_reg); - printk(KERN_ERR "trout_gpio_irq_handler: got masked " - "interrupt: %d:%02x\n", bank, v & int_mask); - } - v &= ~int_mask; - while (v) { - m = v & -v; - j = fls(m) - 1; - /*printk(KERN_INFO "msm_gpio_irq_handler %d:%02x %02x b" - "it %d irq %d\n", bank, v, m, j, int_base + j);*/ - v &= ~m; - generic_handle_irq(int_base + j); - } - int_base += TROUT_INT_BANK0_COUNT; - } - desc->irq_data.chip->irq_ack(&desc->irq_data); -} - -static struct irq_chip trout_gpio_irq_chip = { - .name = "troutgpio", - .irq_ack = trout_gpio_irq_ack, - .irq_mask = trout_gpio_irq_mask, - .irq_unmask = trout_gpio_irq_unmask, - .irq_set_wake = trout_gpio_irq_set_wake, -}; - -/* - * Called from the processor-specific init to enable GPIO pin support. - */ -int __init trout_init_gpio(void) -{ - int i; - for(i = TROUT_INT_START; i <= TROUT_INT_END; i++) { - irq_set_chip_and_handler(i, &trout_gpio_irq_chip, - handle_edge_irq); - set_irq_flags(i, IRQF_VALID); - } - - for (i = 0; i < ARRAY_SIZE(msm_gpio_banks); i++) - gpiochip_add(&msm_gpio_banks[i].chip); - - irq_set_irq_type(MSM_GPIO_TO_INT(17), IRQF_TRIGGER_HIGH); - irq_set_chained_handler(MSM_GPIO_TO_INT(17), trout_gpio_irq_handler); - irq_set_irq_wake(MSM_GPIO_TO_INT(17), 1); - - return 0; -} - -postcore_initcall(trout_init_gpio); - diff --git a/arch/arm/mach-msm/board-trout-mmc.c b/arch/arm/mach-msm/board-trout-mmc.c deleted file mode 100644 index 3723e55819d6..000000000000 --- a/arch/arm/mach-msm/board-trout-mmc.c +++ /dev/null @@ -1,185 +0,0 @@ -/* linux/arch/arm/mach-msm/board-trout-mmc.c -** Author: Brian Swetland <swetland@google.com> -*/ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mmc/host.h> -#include <linux/mmc/sdio_ids.h> -#include <linux/err.h> -#include <linux/debugfs.h> - -#include <asm/io.h> - -#include <mach/vreg.h> - -#include <linux/platform_data/mmc-msm_sdcc.h> - -#include "devices.h" - -#include "board-trout.h" - -#include "proc_comm.h" - -#define DEBUG_SDSLOT_VDD 1 - -/* ---- COMMON ---- */ -static void config_gpio_table(uint32_t *table, int len) -{ - int n; - unsigned id; - for(n = 0; n < len; n++) { - id = table[n]; - msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &id, 0); - } -} - -/* ---- SDCARD ---- */ - -static uint32_t sdcard_on_gpio_table[] = { - PCOM_GPIO_CFG(62, 2, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_8MA), /* CLK */ - PCOM_GPIO_CFG(63, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* CMD */ - PCOM_GPIO_CFG(64, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT3 */ - PCOM_GPIO_CFG(65, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT2 */ - PCOM_GPIO_CFG(66, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT1 */ - PCOM_GPIO_CFG(67, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT0 */ -}; - -static uint32_t sdcard_off_gpio_table[] = { - PCOM_GPIO_CFG(62, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CLK */ - PCOM_GPIO_CFG(63, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CMD */ - PCOM_GPIO_CFG(64, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT3 */ - PCOM_GPIO_CFG(65, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT2 */ - PCOM_GPIO_CFG(66, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT1 */ - PCOM_GPIO_CFG(67, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT0 */ -}; - -static uint opt_disable_sdcard; - -static int __init trout_disablesdcard_setup(char *str) -{ - int cal = simple_strtol(str, NULL, 0); - - opt_disable_sdcard = cal; - return 1; -} - -__setup("board_trout.disable_sdcard=", trout_disablesdcard_setup); - -static struct vreg *vreg_sdslot; /* SD slot power */ - -struct mmc_vdd_xlat { - int mask; - int level; -}; - -static struct mmc_vdd_xlat mmc_vdd_table[] = { - { MMC_VDD_165_195, 1800 }, - { MMC_VDD_20_21, 2050 }, - { MMC_VDD_21_22, 2150 }, - { MMC_VDD_22_23, 2250 }, - { MMC_VDD_23_24, 2350 }, - { MMC_VDD_24_25, 2450 }, - { MMC_VDD_25_26, 2550 }, - { MMC_VDD_26_27, 2650 }, - { MMC_VDD_27_28, 2750 }, - { MMC_VDD_28_29, 2850 }, - { MMC_VDD_29_30, 2950 }, -}; - -static unsigned int sdslot_vdd = 0xffffffff; -static unsigned int sdslot_vreg_enabled; - -static uint32_t trout_sdslot_switchvdd(struct device *dev, unsigned int vdd) -{ - int i, rc; - - BUG_ON(!vreg_sdslot); - - if (vdd == sdslot_vdd) - return 0; - - sdslot_vdd = vdd; - - if (vdd == 0) { -#if DEBUG_SDSLOT_VDD - printk("%s: Disabling SD slot power\n", __func__); -#endif - config_gpio_table(sdcard_off_gpio_table, - ARRAY_SIZE(sdcard_off_gpio_table)); - vreg_disable(vreg_sdslot); - sdslot_vreg_enabled = 0; - return 0; - } - - if (!sdslot_vreg_enabled) { - rc = vreg_enable(vreg_sdslot); - if (rc) { - printk(KERN_ERR "%s: Error enabling vreg (%d)\n", - __func__, rc); - } - config_gpio_table(sdcard_on_gpio_table, - ARRAY_SIZE(sdcard_on_gpio_table)); - sdslot_vreg_enabled = 1; - } - - for (i = 0; i < ARRAY_SIZE(mmc_vdd_table); i++) { - if (mmc_vdd_table[i].mask == (1 << vdd)) { -#if DEBUG_SDSLOT_VDD - printk("%s: Setting level to %u\n", - __func__, mmc_vdd_table[i].level); -#endif - rc = vreg_set_level(vreg_sdslot, - mmc_vdd_table[i].level); - if (rc) { - printk(KERN_ERR - "%s: Error setting vreg level (%d)\n", - __func__, rc); - } - return 0; - } - } - - printk(KERN_ERR "%s: Invalid VDD %d specified\n", __func__, vdd); - return 0; -} - -static unsigned int trout_sdslot_status(struct device *dev) -{ - unsigned int status; - - status = (unsigned int) gpio_get_value(TROUT_GPIO_SDMC_CD_N); - return (!status); -} - -#define TROUT_MMC_VDD MMC_VDD_165_195 | MMC_VDD_20_21 | MMC_VDD_21_22 \ - | MMC_VDD_22_23 | MMC_VDD_23_24 | MMC_VDD_24_25 \ - | MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 \ - | MMC_VDD_28_29 | MMC_VDD_29_30 - -static struct msm_mmc_platform_data trout_sdslot_data = { - .ocr_mask = TROUT_MMC_VDD, - .status = trout_sdslot_status, - .translate_vdd = trout_sdslot_switchvdd, -}; - -int __init trout_init_mmc(unsigned int sys_rev) -{ - sdslot_vreg_enabled = 0; - - vreg_sdslot = vreg_get(0, "gp6"); - if (IS_ERR(vreg_sdslot)) - return PTR_ERR(vreg_sdslot); - - irq_set_irq_wake(TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 1); - - if (!opt_disable_sdcard) - msm_add_sdcc(2, &trout_sdslot_data, - TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 0); - else - printk(KERN_INFO "trout: SD-Card interface disabled\n"); - return 0; -} - diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c deleted file mode 100644 index 77b0a26f897f..000000000000 --- a/arch/arm/mach-msm/board-trout-panel.c +++ /dev/null @@ -1,292 +0,0 @@ -/* linux/arch/arm/mach-msm/board-trout-mddi.c -** Author: Brian Swetland <swetland@google.com> -*/ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/leds.h> -#include <linux/err.h> - -#include <asm/io.h> -#include <asm/mach-types.h> -#include <asm/system_info.h> - -#include <linux/platform_data/video-msm_fb.h> -#include <mach/vreg.h> - -#include "board-trout.h" -#include "proc_comm.h" -#include "clock-pcom.h" -#include "devices.h" - -#define TROUT_DEFAULT_BACKLIGHT_BRIGHTNESS 255 - -#define MDDI_CLIENT_CORE_BASE 0x108000 -#define LCD_CONTROL_BLOCK_BASE 0x110000 -#define SPI_BLOCK_BASE 0x120000 -#define I2C_BLOCK_BASE 0x130000 -#define PWM_BLOCK_BASE 0x140000 -#define GPIO_BLOCK_BASE 0x150000 -#define SYSTEM_BLOCK1_BASE 0x160000 -#define SYSTEM_BLOCK2_BASE 0x170000 - - -#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24) -#define SYSCLKENA (MDDI_CLIENT_CORE_BASE|0x2C) -#define PWM0OFF (PWM_BLOCK_BASE|0x1C) - -#define V_VDDE2E_VDD2_GPIO 0 -#define MDDI_RST_N 82 - -#define MDDICAP0 (MDDI_CLIENT_CORE_BASE|0x00) -#define MDDICAP1 (MDDI_CLIENT_CORE_BASE|0x04) -#define MDDICAP2 (MDDI_CLIENT_CORE_BASE|0x08) -#define MDDICAP3 (MDDI_CLIENT_CORE_BASE|0x0C) -#define MDCAPCHG (MDDI_CLIENT_CORE_BASE|0x10) -#define MDCRCERC (MDDI_CLIENT_CORE_BASE|0x14) -#define TTBUSSEL (MDDI_CLIENT_CORE_BASE|0x18) -#define DPSET0 (MDDI_CLIENT_CORE_BASE|0x1C) -#define DPSET1 (MDDI_CLIENT_CORE_BASE|0x20) -#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24) -#define DPRUN (MDDI_CLIENT_CORE_BASE|0x28) -#define SYSCKENA (MDDI_CLIENT_CORE_BASE|0x2C) -#define TESTMODE (MDDI_CLIENT_CORE_BASE|0x30) -#define FIFOMONI (MDDI_CLIENT_CORE_BASE|0x34) -#define INTMONI (MDDI_CLIENT_CORE_BASE|0x38) -#define MDIOBIST (MDDI_CLIENT_CORE_BASE|0x3C) -#define MDIOPSET (MDDI_CLIENT_CORE_BASE|0x40) -#define BITMAP0 (MDDI_CLIENT_CORE_BASE|0x44) -#define BITMAP1 (MDDI_CLIENT_CORE_BASE|0x48) -#define BITMAP2 (MDDI_CLIENT_CORE_BASE|0x4C) -#define BITMAP3 (MDDI_CLIENT_CORE_BASE|0x50) -#define BITMAP4 (MDDI_CLIENT_CORE_BASE|0x54) - -#define SRST (LCD_CONTROL_BLOCK_BASE|0x00) -#define PORT_ENB (LCD_CONTROL_BLOCK_BASE|0x04) -#define START (LCD_CONTROL_BLOCK_BASE|0x08) -#define PORT (LCD_CONTROL_BLOCK_BASE|0x0C) -#define CMN (LCD_CONTROL_BLOCK_BASE|0x10) -#define GAMMA (LCD_CONTROL_BLOCK_BASE|0x14) -#define INTFLG (LCD_CONTROL_BLOCK_BASE|0x18) -#define INTMSK (LCD_CONTROL_BLOCK_BASE|0x1C) -#define MPLFBUF (LCD_CONTROL_BLOCK_BASE|0x20) -#define HDE_LEFT (LCD_CONTROL_BLOCK_BASE|0x24) -#define VDE_TOP (LCD_CONTROL_BLOCK_BASE|0x28) -#define PXL (LCD_CONTROL_BLOCK_BASE|0x30) -#define HCYCLE (LCD_CONTROL_BLOCK_BASE|0x34) -#define HSW (LCD_CONTROL_BLOCK_BASE|0x38) -#define HDE_START (LCD_CONTROL_BLOCK_BASE|0x3C) -#define HDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x40) -#define VCYCLE (LCD_CONTROL_BLOCK_BASE|0x44) -#define VSW (LCD_CONTROL_BLOCK_BASE|0x48) -#define VDE_START (LCD_CONTROL_BLOCK_BASE|0x4C) -#define VDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x50) -#define WAKEUP (LCD_CONTROL_BLOCK_BASE|0x54) -#define WSYN_DLY (LCD_CONTROL_BLOCK_BASE|0x58) -#define REGENB (LCD_CONTROL_BLOCK_BASE|0x5C) -#define VSYNIF (LCD_CONTROL_BLOCK_BASE|0x60) -#define WRSTB (LCD_CONTROL_BLOCK_BASE|0x64) -#define RDSTB (LCD_CONTROL_BLOCK_BASE|0x68) -#define ASY_DATA (LCD_CONTROL_BLOCK_BASE|0x6C) -#define ASY_DATB (LCD_CONTROL_BLOCK_BASE|0x70) -#define ASY_DATC (LCD_CONTROL_BLOCK_BASE|0x74) -#define ASY_DATD (LCD_CONTROL_BLOCK_BASE|0x78) -#define ASY_DATE (LCD_CONTROL_BLOCK_BASE|0x7C) -#define ASY_DATF (LCD_CONTROL_BLOCK_BASE|0x80) -#define ASY_DATG (LCD_CONTROL_BLOCK_BASE|0x84) -#define ASY_DATH (LCD_CONTROL_BLOCK_BASE|0x88) -#define ASY_CMDSET (LCD_CONTROL_BLOCK_BASE|0x8C) - -#define SSICTL (SPI_BLOCK_BASE|0x00) -#define SSITIME (SPI_BLOCK_BASE|0x04) -#define SSITX (SPI_BLOCK_BASE|0x08) -#define SSIRX (SPI_BLOCK_BASE|0x0C) -#define SSIINTC (SPI_BLOCK_BASE|0x10) -#define SSIINTS (SPI_BLOCK_BASE|0x14) -#define SSIDBG1 (SPI_BLOCK_BASE|0x18) -#define SSIDBG2 (SPI_BLOCK_BASE|0x1C) -#define SSIID (SPI_BLOCK_BASE|0x20) - -#define WKREQ (SYSTEM_BLOCK1_BASE|0x00) -#define CLKENB (SYSTEM_BLOCK1_BASE|0x04) -#define DRAMPWR (SYSTEM_BLOCK1_BASE|0x08) -#define INTMASK (SYSTEM_BLOCK1_BASE|0x0C) -#define GPIOSEL (SYSTEM_BLOCK2_BASE|0x00) - -#define GPIODATA (GPIO_BLOCK_BASE|0x00) -#define GPIODIR (GPIO_BLOCK_BASE|0x04) -#define GPIOIS (GPIO_BLOCK_BASE|0x08) -#define GPIOIBE (GPIO_BLOCK_BASE|0x0C) -#define GPIOIEV (GPIO_BLOCK_BASE|0x10) -#define GPIOIE (GPIO_BLOCK_BASE|0x14) -#define GPIORIS (GPIO_BLOCK_BASE|0x18) -#define GPIOMIS (GPIO_BLOCK_BASE|0x1C) -#define GPIOIC (GPIO_BLOCK_BASE|0x20) -#define GPIOOMS (GPIO_BLOCK_BASE|0x24) -#define GPIOPC (GPIO_BLOCK_BASE|0x28) -#define GPIOID (GPIO_BLOCK_BASE|0x30) - -#define SPI_WRITE(reg, val) \ - { SSITX, 0x00010000 | (((reg) & 0xff) << 8) | ((val) & 0xff) }, \ - { 0, 5 }, - -#define SPI_WRITE1(reg) \ - { SSITX, (reg) & 0xff }, \ - { 0, 5 }, - -struct mddi_table { - uint32_t reg; - uint32_t value; -}; -static struct mddi_table mddi_toshiba_init_table[] = { - { DPSET0, 0x09e90046 }, - { DPSET1, 0x00000118 }, - { DPSUS, 0x00000000 }, - { DPRUN, 0x00000001 }, - { 1, 14 }, /* msleep 14 */ - { SYSCKENA, 0x00000001 }, - { CLKENB, 0x0000A1EF }, /* # SYS.CLKENB # Enable clocks for each module (without DCLK , i2cCLK) */ - - { GPIODATA, 0x02000200 }, /* # GPI .GPIODATA # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0 */ - { GPIODIR, 0x000030D }, /* 24D # GPI .GPIODIR # Select direction of GPIO port (0,2,3,6,9 output) */ - { GPIOSEL, 0/*0x00000173*/}, /* # SYS.GPIOSEL # GPIO port multiplexing control */ - { GPIOPC, 0x03C300C0 }, /* # GPI .GPIOPC # GPIO2,3 PD cut */ - { WKREQ, 0x00000000 }, /* # SYS.WKREQ # Wake-up request event is VSYNC alignment */ - - { GPIOIBE, 0x000003FF }, - { GPIOIS, 0x00000000 }, - { GPIOIC, 0x000003FF }, - { GPIOIE, 0x00000000 }, - - { GPIODATA, 0x00040004 }, /* # GPI .GPIODATA # eDRAM VD supply */ - { 1, 1 }, /* msleep 1 */ - { GPIODATA, 0x02040004 }, /* # GPI .GPIODATA # eDRAM VD supply */ - { DRAMPWR, 0x00000001 }, /* eDRAM power */ -}; - -#define GPIOSEL_VWAKEINT (1U << 0) -#define INTMASK_VWAKEOUT (1U << 0) - - -static int trout_new_backlight = 1; -static struct vreg *vreg_mddi_1v5; -static struct vreg *vreg_lcm_2v85; - -static void trout_process_mddi_table(struct msm_mddi_client_data *client_data, - struct mddi_table *table, size_t count) -{ - int i; - for (i = 0; i < count; i++) { - uint32_t reg = table[i].reg; - uint32_t value = table[i].value; - - if (reg == 0) - udelay(value); - else if (reg == 1) - msleep(value); - else - client_data->remote_write(client_data, value, reg); - } -} - -static int trout_mddi_toshiba_client_init( - struct msm_mddi_bridge_platform_data *bridge_data, - struct msm_mddi_client_data *client_data) -{ - int panel_id; - - client_data->auto_hibernate(client_data, 0); - trout_process_mddi_table(client_data, mddi_toshiba_init_table, - ARRAY_SIZE(mddi_toshiba_init_table)); - client_data->auto_hibernate(client_data, 1); - panel_id = (client_data->remote_read(client_data, GPIODATA) >> 4) & 3; - if (panel_id > 1) { - printk(KERN_WARNING "unknown panel id at mddi_enable\n"); - return -1; - } - return 0; -} - -static int trout_mddi_toshiba_client_uninit( - struct msm_mddi_bridge_platform_data *bridge_data, - struct msm_mddi_client_data *client_data) -{ - return 0; -} - -static struct resource resources_msm_fb[] = { - { - .start = MSM_FB_BASE, - .end = MSM_FB_BASE + MSM_FB_SIZE, - .flags = IORESOURCE_MEM, - }, -}; - -struct msm_mddi_bridge_platform_data toshiba_client_data = { - .init = trout_mddi_toshiba_client_init, - .uninit = trout_mddi_toshiba_client_uninit, - .fb_data = { - .xres = 320, - .yres = 480, - .width = 45, - .height = 67, - .output_format = 0, - }, -}; - -static struct msm_mddi_platform_data mddi_pdata = { - .clk_rate = 122880000, - .fb_resource = resources_msm_fb, - .num_clients = 1, - .client_platform_data = { - { - .product_id = (0xd263 << 16 | 0), - .name = "mddi_c_d263_0000", - .id = 0, - .client_data = &toshiba_client_data, - .clk_rate = 0, - }, - }, -}; - -int __init trout_init_panel(void) -{ - int rc; - - if (!machine_is_trout()) - return 0; - vreg_mddi_1v5 = vreg_get(0, "gp2"); - if (IS_ERR(vreg_mddi_1v5)) - return PTR_ERR(vreg_mddi_1v5); - vreg_lcm_2v85 = vreg_get(0, "gp4"); - if (IS_ERR(vreg_lcm_2v85)) - return PTR_ERR(vreg_lcm_2v85); - - trout_new_backlight = system_rev >= 5; - if (trout_new_backlight) { - uint32_t config = PCOM_GPIO_CFG(27, 0, GPIO_OUTPUT, - GPIO_NO_PULL, GPIO_8MA); - msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0); - } else { - uint32_t config = PCOM_GPIO_CFG(27, 1, GPIO_OUTPUT, - GPIO_NO_PULL, GPIO_8MA); - uint32_t id = P_GP_CLK; - uint32_t rate = 19200000; - - msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0); - - msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate); - if (id < 0) - pr_err("trout_init_panel: set clock rate failed\n"); - } - - rc = platform_device_register(&msm_device_mdp); - if (rc) - return rc; - msm_device_mddi0.dev.platform_data = &mddi_pdata; - return platform_device_register(&msm_device_mddi0); -} - -device_initcall(trout_init_panel); diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c deleted file mode 100644 index ba3edd3a46cb..000000000000 --- a/arch/arm/mach-msm/board-trout.c +++ /dev/null @@ -1,111 +0,0 @@ -/* linux/arch/arm/mach-msm/board-trout.c - * - * Copyright (C) 2009 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#define pr_fmt(fmt) "%s: " fmt, __func__ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/clkdev.h> -#include <linux/memblock.h> - -#include <asm/system_info.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/setup.h> - -#include <mach/hardware.h> -#include <mach/msm_iomap.h> - -#include "devices.h" -#include "board-trout.h" -#include "common.h" - -extern int trout_init_mmc(unsigned int); - -static struct platform_device *devices[] __initdata = { - &msm_clock_7x01a, - &msm_device_gpio_7201, - &msm_device_uart3, - &msm_device_smd, - &msm_device_nand, - &msm_device_hsusb, - &msm_device_i2c, -}; - -static void __init trout_init_early(void) -{ - arch_ioremap_caller = __msm_ioremap_caller; -} - -static void __init trout_init_irq(void) -{ - msm_init_irq(); -} - -static void __init trout_fixup(struct tag *tags, char **cmdline) -{ - memblock_add(PHYS_OFFSET, 101*SZ_1M); -} - -static void __init trout_init(void) -{ - int rc; - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - if (IS_ENABLED(CONFIG_MMC)) { - rc = trout_init_mmc(system_rev); - if (rc) - pr_crit("MMC init failure (%d)\n", rc); - } -} - -static struct map_desc trout_io_desc[] __initdata = { - { - .virtual = (unsigned long)TROUT_CPLD_BASE, - .pfn = __phys_to_pfn(TROUT_CPLD_START), - .length = TROUT_CPLD_SIZE, - .type = MT_DEVICE_NONSHARED - } -}; - -static void __init trout_map_io(void) -{ - msm_map_common_io(); - iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc)); - -#if defined(CONFIG_DEBUG_MSM_UART) && (CONFIG_DEBUG_UART_PHYS == 0xa9c00000) - /* route UART3 to the "H2W" extended usb connector */ - writeb(0x80, TROUT_CPLD_BASE + 0x00); -#endif -} - -static void __init trout_init_late(void) -{ - smd_debugfs_init(); -} - -MACHINE_START(TROUT, "HTC Dream") - .atag_offset = 0x100, - .fixup = trout_fixup, - .map_io = trout_map_io, - .init_early = trout_init_early, - .init_irq = trout_init_irq, - .init_machine = trout_init, - .init_late = trout_init_late, - .init_time = msm7x01_timer_init, -MACHINE_END diff --git a/arch/arm/mach-msm/board-trout.h b/arch/arm/mach-msm/board-trout.h deleted file mode 100644 index adb757abbb92..000000000000 --- a/arch/arm/mach-msm/board-trout.h +++ /dev/null @@ -1,162 +0,0 @@ -/* linux/arch/arm/mach-msm/board-trout.h -** Author: Brian Swetland <swetland@google.com> -*/ -#ifndef __ARCH_ARM_MACH_MSM_BOARD_TROUT_H -#define __ARCH_ARM_MACH_MSM_BOARD_TROUT_H - -#include "common.h" - -#define MSM_SMI_BASE 0x00000000 -#define MSM_SMI_SIZE 0x00800000 - -#define MSM_EBI_BASE 0x10000000 -#define MSM_EBI_SIZE 0x06e00000 - -#define MSM_PMEM_GPU0_BASE 0x00000000 -#define MSM_PMEM_GPU0_SIZE 0x00700000 - -#define MSM_PMEM_MDP_BASE 0x02000000 -#define MSM_PMEM_MDP_SIZE 0x00800000 - -#define MSM_PMEM_ADSP_BASE 0x02800000 -#define MSM_PMEM_ADSP_SIZE 0x00800000 - -#define MSM_PMEM_CAMERA_BASE 0x03000000 -#define MSM_PMEM_CAMERA_SIZE 0x00800000 - -#define MSM_FB_BASE 0x03800000 -#define MSM_FB_SIZE 0x00100000 - -#define MSM_LINUX_BASE MSM_EBI_BASE -#define MSM_LINUX_SIZE 0x06500000 - -#define MSM_PMEM_GPU1_SIZE 0x800000 -#define MSM_PMEM_GPU1_BASE (MSM_RAM_CONSOLE_BASE - MSM_PMEM_GPU1_SIZE) - -#define MSM_RAM_CONSOLE_BASE (MSM_EBI_BASE + 0x6d00000) -#define MSM_RAM_CONSOLE_SIZE (128 * SZ_1K) - -#if (MSM_FB_BASE + MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE) -#error invalid memory map -#endif - -#define DECLARE_MSM_IOMAP -#include <mach/msm_iomap.h> - -#define TROUT_4_BALL_UP_0 1 -#define TROUT_4_BALL_LEFT_0 18 -#define TROUT_4_BALL_DOWN_0 57 -#define TROUT_4_BALL_RIGHT_0 91 - -#define TROUT_5_BALL_UP_0 94 -#define TROUT_5_BALL_LEFT_0 18 -#define TROUT_5_BALL_DOWN_0 90 -#define TROUT_5_BALL_RIGHT_0 19 - -#define TROUT_POWER_KEY 20 - -#define TROUT_4_TP_LS_EN 19 -#define TROUT_5_TP_LS_EN 1 - -#define TROUT_CPLD_BASE IOMEM(0xE8100000) -#define TROUT_CPLD_START 0x98000000 -#define TROUT_CPLD_SIZE SZ_4K - -#define TROUT_GPIO_CABLE_IN1 (83) -#define TROUT_GPIO_CABLE_IN2 (49) - -#define TROUT_GPIO_START (128) - -#define TROUT_GPIO_INT_MASK0_REG (0x0c) -#define TROUT_GPIO_INT_STAT0_REG (0x0e) -#define TROUT_GPIO_INT_MASK1_REG (0x14) -#define TROUT_GPIO_INT_STAT1_REG (0x10) - -#define TROUT_GPIO_HAPTIC_PWM (28) -#define TROUT_GPIO_PS_HOLD (25) - -#define TROUT_GPIO_MISC2_BASE (TROUT_GPIO_START + 0x00) -#define TROUT_GPIO_MISC3_BASE (TROUT_GPIO_START + 0x08) -#define TROUT_GPIO_MISC4_BASE (TROUT_GPIO_START + 0x10) -#define TROUT_GPIO_MISC5_BASE (TROUT_GPIO_START + 0x18) -#define TROUT_GPIO_INT2_BASE (TROUT_GPIO_START + 0x20) -#define TROUT_GPIO_MISC1_BASE (TROUT_GPIO_START + 0x28) -#define TROUT_GPIO_VIRTUAL_BASE (TROUT_GPIO_START + 0x30) -#define TROUT_GPIO_INT5_BASE (TROUT_GPIO_START + 0x48) - -#define TROUT_GPIO_CHARGER_EN (TROUT_GPIO_MISC2_BASE + 0) -#define TROUT_GPIO_ISET (TROUT_GPIO_MISC2_BASE + 1) -#define TROUT_GPIO_H2W_DAT_DIR (TROUT_GPIO_MISC2_BASE + 2) -#define TROUT_GPIO_H2W_CLK_DIR (TROUT_GPIO_MISC2_BASE + 3) -#define TROUT_GPIO_H2W_DAT_GPO (TROUT_GPIO_MISC2_BASE + 4) -#define TROUT_GPIO_H2W_CLK_GPO (TROUT_GPIO_MISC2_BASE + 5) -#define TROUT_GPIO_H2W_SEL0 (TROUT_GPIO_MISC2_BASE + 6) -#define TROUT_GPIO_H2W_SEL1 (TROUT_GPIO_MISC2_BASE + 7) - -#define TROUT_GPIO_SPOTLIGHT_EN (TROUT_GPIO_MISC3_BASE + 0) -#define TROUT_GPIO_FLASH_EN (TROUT_GPIO_MISC3_BASE + 1) -#define TROUT_GPIO_I2C_PULL (TROUT_GPIO_MISC3_BASE + 2) -#define TROUT_GPIO_TP_I2C_PULL (TROUT_GPIO_MISC3_BASE + 3) -#define TROUT_GPIO_TP_EN (TROUT_GPIO_MISC3_BASE + 4) -#define TROUT_GPIO_JOG_EN (TROUT_GPIO_MISC3_BASE + 5) -#define TROUT_GPIO_UI_LED_EN (TROUT_GPIO_MISC3_BASE + 6) -#define TROUT_GPIO_QTKEY_LED_EN (TROUT_GPIO_MISC3_BASE + 7) - -#define TROUT_GPIO_VCM_PWDN (TROUT_GPIO_MISC4_BASE + 0) -#define TROUT_GPIO_USB_H2W_SW (TROUT_GPIO_MISC4_BASE + 1) -#define TROUT_GPIO_COMPASS_RST_N (TROUT_GPIO_MISC4_BASE + 2) -#define TROUT_GPIO_HAPTIC_EN_UP (TROUT_GPIO_MISC4_BASE + 3) -#define TROUT_GPIO_HAPTIC_EN_MAIN (TROUT_GPIO_MISC4_BASE + 4) -#define TROUT_GPIO_USB_PHY_RST_N (TROUT_GPIO_MISC4_BASE + 5) -#define TROUT_GPIO_WIFI_PA_RESETX (TROUT_GPIO_MISC4_BASE + 6) -#define TROUT_GPIO_WIFI_EN (TROUT_GPIO_MISC4_BASE + 7) - -#define TROUT_GPIO_BT_32K_EN (TROUT_GPIO_MISC5_BASE + 0) -#define TROUT_GPIO_MAC_32K_EN (TROUT_GPIO_MISC5_BASE + 1) -#define TROUT_GPIO_MDDI_32K_EN (TROUT_GPIO_MISC5_BASE + 2) -#define TROUT_GPIO_COMPASS_32K_EN (TROUT_GPIO_MISC5_BASE + 3) - -#define TROUT_GPIO_NAVI_ACT_N (TROUT_GPIO_INT2_BASE + 0) -#define TROUT_GPIO_COMPASS_IRQ (TROUT_GPIO_INT2_BASE + 1) -#define TROUT_GPIO_SLIDING_DET (TROUT_GPIO_INT2_BASE + 2) -#define TROUT_GPIO_AUD_HSMIC_DET_N (TROUT_GPIO_INT2_BASE + 3) -#define TROUT_GPIO_SD_DOOR_N (TROUT_GPIO_INT2_BASE + 4) -#define TROUT_GPIO_CAM_BTN_STEP1_N (TROUT_GPIO_INT2_BASE + 5) -#define TROUT_GPIO_CAM_BTN_STEP2_N (TROUT_GPIO_INT2_BASE + 6) -#define TROUT_GPIO_TP_ATT_N (TROUT_GPIO_INT2_BASE + 7) -#define TROUT_GPIO_BANK0_FIRST_INT_SOURCE (TROUT_GPIO_NAVI_ACT_N) -#define TROUT_GPIO_BANK0_LAST_INT_SOURCE (TROUT_GPIO_TP_ATT_N) - -#define TROUT_GPIO_H2W_DAT_GPI (TROUT_GPIO_MISC1_BASE + 0) -#define TROUT_GPIO_H2W_CLK_GPI (TROUT_GPIO_MISC1_BASE + 1) -#define TROUT_GPIO_CPLD128_VER_0 (TROUT_GPIO_MISC1_BASE + 4) -#define TROUT_GPIO_CPLD128_VER_1 (TROUT_GPIO_MISC1_BASE + 5) -#define TROUT_GPIO_CPLD128_VER_2 (TROUT_GPIO_MISC1_BASE + 6) -#define TROUT_GPIO_CPLD128_VER_3 (TROUT_GPIO_MISC1_BASE + 7) - -#define TROUT_GPIO_SDMC_CD_N (TROUT_GPIO_VIRTUAL_BASE + 0) -#define TROUT_GPIO_END (TROUT_GPIO_SDMC_CD_N) -#define TROUT_GPIO_BANK1_FIRST_INT_SOURCE (TROUT_GPIO_SDMC_CD_N) -#define TROUT_GPIO_BANK1_LAST_INT_SOURCE (TROUT_GPIO_SDMC_CD_N) - -#define TROUT_GPIO_VIRTUAL_TO_REAL_OFFSET \ - (TROUT_GPIO_INT5_BASE - TROUT_GPIO_VIRTUAL_BASE) - -#define TROUT_INT_START (NR_MSM_IRQS + NR_GPIO_IRQS) -#define TROUT_INT_BANK0_COUNT (8) -#define TROUT_INT_BANK1_START (TROUT_INT_START + TROUT_INT_BANK0_COUNT) -#define TROUT_INT_BANK1_COUNT (1) -#define TROUT_INT_END (TROUT_INT_START + TROUT_INT_BANK0_COUNT + \ - TROUT_INT_BANK1_COUNT - 1) -#define TROUT_GPIO_TO_INT(n) (((n) <= TROUT_GPIO_BANK0_LAST_INT_SOURCE) ? \ - (TROUT_INT_START - TROUT_GPIO_BANK0_FIRST_INT_SOURCE + (n)) : \ - (TROUT_INT_BANK1_START - TROUT_GPIO_BANK1_FIRST_INT_SOURCE + (n))) - -#define TROUT_INT_TO_BANK(n) ((n - TROUT_INT_START) / TROUT_INT_BANK0_COUNT) -#define TROUT_INT_TO_MASK(n) (1U << ((n - TROUT_INT_START) & 7)) -#define TROUT_BANK_TO_MASK_REG(bank) \ - (bank ? TROUT_GPIO_INT_MASK1_REG : TROUT_GPIO_INT_MASK0_REG) -#define TROUT_BANK_TO_STAT_REG(bank) \ - (bank ? TROUT_GPIO_INT_STAT1_REG : TROUT_GPIO_INT_STAT0_REG) - -#endif /* GUARD */ diff --git a/arch/arm/mach-msm/clock-pcom.c b/arch/arm/mach-msm/clock-pcom.c deleted file mode 100644 index f5b69d736ee5..000000000000 --- a/arch/arm/mach-msm/clock-pcom.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007-2012, The Linux Foundation. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/clk-provider.h> -#include <linux/clkdev.h> - -#include <mach/clk.h> - -#include "proc_comm.h" -#include "clock.h" -#include "clock-pcom.h" - -struct clk_pcom { - unsigned id; - unsigned long flags; - struct msm_clk msm_clk; -}; - -static inline struct clk_pcom *to_clk_pcom(struct clk_hw *hw) -{ - return container_of(to_msm_clk(hw), struct clk_pcom, msm_clk); -} - -static int pc_clk_enable(struct clk_hw *hw) -{ - unsigned id = to_clk_pcom(hw)->id; - int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL); - if (rc < 0) - return rc; - else - return (int)id < 0 ? -EINVAL : 0; -} - -static void pc_clk_disable(struct clk_hw *hw) -{ - unsigned id = to_clk_pcom(hw)->id; - msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL); -} - -static int pc_clk_reset(struct clk_hw *hw, enum clk_reset_action action) -{ - int rc; - unsigned id = to_clk_pcom(hw)->id; - - if (action == CLK_RESET_ASSERT) - rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_ASSERT, &id, NULL); - else - rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_DEASSERT, &id, NULL); - - if (rc < 0) - return rc; - else - return (int)id < 0 ? -EINVAL : 0; -} - -static int pc_clk_set_rate(struct clk_hw *hw, unsigned long new_rate, - unsigned long p_rate) -{ - struct clk_pcom *p = to_clk_pcom(hw); - unsigned id = p->id, rate = new_rate; - int rc; - - /* - * The rate _might_ be rounded off to the nearest KHz value by the - * remote function. So a return value of 0 doesn't necessarily mean - * that the exact rate was set successfully. - */ - if (p->flags & CLKFLAG_MIN) - rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate); - else - rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate); - if (rc < 0) - return rc; - else - return (int)id < 0 ? -EINVAL : 0; -} - -static unsigned long pc_clk_recalc_rate(struct clk_hw *hw, unsigned long p_rate) -{ - unsigned id = to_clk_pcom(hw)->id; - if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL)) - return 0; - else - return id; -} - -static int pc_clk_is_enabled(struct clk_hw *hw) -{ - unsigned id = to_clk_pcom(hw)->id; - if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL)) - return 0; - else - return id; -} - -static long pc_clk_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *p_rate) -{ - /* Not really supported; pc_clk_set_rate() does rounding on it's own. */ - return rate; -} - -static struct clk_ops clk_ops_pcom = { - .enable = pc_clk_enable, - .disable = pc_clk_disable, - .set_rate = pc_clk_set_rate, - .recalc_rate = pc_clk_recalc_rate, - .is_enabled = pc_clk_is_enabled, - .round_rate = pc_clk_round_rate, -}; - -static int msm_clock_pcom_probe(struct platform_device *pdev) -{ - const struct pcom_clk_pdata *pdata = pdev->dev.platform_data; - int i, ret; - - for (i = 0; i < pdata->num_lookups; i++) { - const struct clk_pcom_desc *desc = &pdata->lookup[i]; - struct clk *c; - struct clk_pcom *p; - struct clk_hw *hw; - struct clk_init_data init; - - p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); - if (!p) - return -ENOMEM; - - p->id = desc->id; - p->flags = desc->flags; - p->msm_clk.reset = pc_clk_reset; - - hw = &p->msm_clk.hw; - hw->init = &init; - - init.name = desc->name; - init.ops = &clk_ops_pcom; - init.num_parents = 0; - init.flags = CLK_IS_ROOT; - - if (!(p->flags & CLKFLAG_AUTO_OFF)) - init.flags |= CLK_IGNORE_UNUSED; - - c = devm_clk_register(&pdev->dev, hw); - ret = clk_register_clkdev(c, desc->con, desc->dev); - if (ret) - return ret; - } - - return 0; -} - -static struct platform_driver msm_clock_pcom_driver = { - .probe = msm_clock_pcom_probe, - .driver = { - .name = "msm-clock-pcom", - }, -}; -module_platform_driver(msm_clock_pcom_driver); - -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-msm/clock-pcom.h b/arch/arm/mach-msm/clock-pcom.h deleted file mode 100644 index 5bb164fd46a8..000000000000 --- a/arch/arm/mach-msm/clock-pcom.h +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H -#define __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H - -/* clock IDs used by the modem processor */ - -#define P_ACPU_CLK 0 /* Applications processor clock */ -#define P_ADM_CLK 1 /* Applications data mover clock */ -#define P_ADSP_CLK 2 /* ADSP clock */ -#define P_EBI1_CLK 3 /* External bus interface 1 clock */ -#define P_EBI2_CLK 4 /* External bus interface 2 clock */ -#define P_ECODEC_CLK 5 /* External CODEC clock */ -#define P_EMDH_CLK 6 /* External MDDI host clock */ -#define P_GP_CLK 7 /* General purpose clock */ -#define P_GRP_3D_CLK 8 /* Graphics clock */ -#define P_I2C_CLK 9 /* I2C clock */ -#define P_ICODEC_RX_CLK 10 /* Internal CODEX RX clock */ -#define P_ICODEC_TX_CLK 11 /* Internal CODEX TX clock */ -#define P_IMEM_CLK 12 /* Internal graphics memory clock */ -#define P_MDC_CLK 13 /* MDDI client clock */ -#define P_MDP_CLK 14 /* Mobile display processor clock */ -#define P_PBUS_CLK 15 /* Peripheral bus clock */ -#define P_PCM_CLK 16 /* PCM clock */ -#define P_PMDH_CLK 17 /* Primary MDDI host clock */ -#define P_SDAC_CLK 18 /* Stereo DAC clock */ -#define P_SDC1_CLK 19 /* Secure Digital Card clocks */ -#define P_SDC1_P_CLK 20 -#define P_SDC2_CLK 21 -#define P_SDC2_P_CLK 22 -#define P_SDC3_CLK 23 -#define P_SDC3_P_CLK 24 -#define P_SDC4_CLK 25 -#define P_SDC4_P_CLK 26 -#define P_TSIF_CLK 27 /* Transport Stream Interface clocks */ -#define P_TSIF_REF_CLK 28 -#define P_TV_DAC_CLK 29 /* TV clocks */ -#define P_TV_ENC_CLK 30 -#define P_UART1_CLK 31 /* UART clocks */ -#define P_UART2_CLK 32 -#define P_UART3_CLK 33 -#define P_UART1DM_CLK 34 -#define P_UART2DM_CLK 35 -#define P_USB_HS_CLK 36 /* High speed USB core clock */ -#define P_USB_HS_P_CLK 37 /* High speed USB pbus clock */ -#define P_USB_OTG_CLK 38 /* Full speed USB clock */ -#define P_VDC_CLK 39 /* Video controller clock */ -#define P_VFE_MDC_CLK 40 /* Camera / Video Front End clock */ -#define P_VFE_CLK 41 /* VFE MDDI client clock */ -#define P_MDP_LCDC_PCLK_CLK 42 -#define P_MDP_LCDC_PAD_PCLK_CLK 43 -#define P_MDP_VSYNC_CLK 44 -#define P_SPI_CLK 45 -#define P_VFE_AXI_CLK 46 -#define P_USB_HS2_CLK 47 /* High speed USB 2 core clock */ -#define P_USB_HS2_P_CLK 48 /* High speed USB 2 pbus clock */ -#define P_USB_HS3_CLK 49 /* High speed USB 3 core clock */ -#define P_USB_HS3_P_CLK 50 /* High speed USB 3 pbus clock */ -#define P_GRP_3D_P_CLK 51 /* Graphics pbus clock */ -#define P_USB_PHY_CLK 52 /* USB PHY clock */ -#define P_USB_HS_CORE_CLK 53 /* High speed USB 1 core clock */ -#define P_USB_HS2_CORE_CLK 54 /* High speed USB 2 core clock */ -#define P_USB_HS3_CORE_CLK 55 /* High speed USB 3 core clock */ -#define P_CAM_M_CLK 56 -#define P_CAMIF_PAD_P_CLK 57 -#define P_GRP_2D_CLK 58 -#define P_GRP_2D_P_CLK 59 -#define P_I2S_CLK 60 -#define P_JPEG_CLK 61 -#define P_JPEG_P_CLK 62 -#define P_LPA_CODEC_CLK 63 -#define P_LPA_CORE_CLK 64 -#define P_LPA_P_CLK 65 -#define P_MDC_IO_CLK 66 -#define P_MDC_P_CLK 67 -#define P_MFC_CLK 68 -#define P_MFC_DIV2_CLK 69 -#define P_MFC_P_CLK 70 -#define P_QUP_I2C_CLK 71 -#define P_ROTATOR_IMEM_CLK 72 -#define P_ROTATOR_P_CLK 73 -#define P_VFE_CAMIF_CLK 74 -#define P_VFE_P_CLK 75 -#define P_VPE_CLK 76 -#define P_I2C_2_CLK 77 -#define P_MI2S_CODEC_RX_S_CLK 78 -#define P_MI2S_CODEC_RX_M_CLK 79 -#define P_MI2S_CODEC_TX_S_CLK 80 -#define P_MI2S_CODEC_TX_M_CLK 81 -#define P_PMDH_P_CLK 82 -#define P_EMDH_P_CLK 83 -#define P_SPI_P_CLK 84 -#define P_TSIF_P_CLK 85 -#define P_MDP_P_CLK 86 -#define P_SDAC_M_CLK 87 -#define P_MI2S_S_CLK 88 -#define P_MI2S_M_CLK 89 -#define P_AXI_ROTATOR_CLK 90 -#define P_HDMI_CLK 91 -#define P_CSI0_CLK 92 -#define P_CSI0_VFE_CLK 93 -#define P_CSI0_P_CLK 94 -#define P_CSI1_CLK 95 -#define P_CSI1_VFE_CLK 96 -#define P_CSI1_P_CLK 97 -#define P_GSBI_CLK 98 -#define P_GSBI_P_CLK 99 -#define P_CE_CLK 100 /* Crypto engine */ -#define P_CODEC_SSBI_CLK 101 - -#define P_NR_CLKS 102 - -struct clk_pcom_desc { - unsigned id; - const char *name; - const char *con; - const char *dev; - unsigned long flags; -}; - -struct pcom_clk_pdata { - struct clk_pcom_desc *lookup; - u32 num_lookups; -}; - -#define CLK_PCOM(clk_name, clk_id, clk_dev, clk_flags) { \ - .id = P_##clk_id, \ - .name = #clk_id, \ - .con = clk_name, \ - .dev = clk_dev, \ - .flags = clk_flags, \ - } - -#endif diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c deleted file mode 100644 index 35ea02b52483..000000000000 --- a/arch/arm/mach-msm/clock.c +++ /dev/null @@ -1,28 +0,0 @@ -/* arch/arm/mach-msm/clock.c - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007-2012, The Linux Foundation. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/clk-provider.h> -#include <linux/module.h> - -#include "clock.h" - -int clk_reset(struct clk *clk, enum clk_reset_action action) -{ - struct clk_hw *hw = __clk_get_hw(clk); - struct msm_clk *m = to_msm_clk(hw); - return m->reset(hw, action); -} -EXPORT_SYMBOL(clk_reset); diff --git a/arch/arm/mach-msm/clock.h b/arch/arm/mach-msm/clock.h deleted file mode 100644 index 42d29dd7aafc..000000000000 --- a/arch/arm/mach-msm/clock.h +++ /dev/null @@ -1,43 +0,0 @@ -/* arch/arm/mach-msm/clock.h - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007-2012, The Linux Foundation. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ARCH_ARM_MACH_MSM_CLOCK_H -#define __ARCH_ARM_MACH_MSM_CLOCK_H - -#include <linux/clk-provider.h> -#include <mach/clk.h> - -#define CLK_FIRST_AVAILABLE_FLAG 0x00000100 -#define CLKFLAG_AUTO_OFF 0x00000200 -#define CLKFLAG_MIN 0x00000400 -#define CLKFLAG_MAX 0x00000800 - -#define OFF CLKFLAG_AUTO_OFF -#define CLK_MIN CLKFLAG_MIN -#define CLK_MAX CLKFLAG_MAX -#define CLK_MINMAX (CLK_MIN | CLK_MAX) - -struct msm_clk { - int (*reset)(struct clk_hw *hw, enum clk_reset_action action); - struct clk_hw hw; -}; - -static inline struct msm_clk *to_msm_clk(struct clk_hw *hw) -{ - return container_of(hw, struct msm_clk, hw); -} - -#endif diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h deleted file mode 100644 index 572479a3c7be..000000000000 --- a/arch/arm/mach-msm/common.h +++ /dev/null @@ -1,41 +0,0 @@ -/* Copyright (c) 2012, The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __MACH_COMMON_H -#define __MACH_COMMON_H - -extern void msm7x01_timer_init(void); -extern void msm7x30_timer_init(void); -extern void qsd8x50_timer_init(void); - -extern void msm_map_common_io(void); -extern void msm_map_msm7x30_io(void); -extern void msm_map_qsd8x50_io(void); - -extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size, - unsigned int mtype, void *caller); - -struct msm_mmc_platform_data; - -extern void msm_add_devices(void); -extern void msm_init_irq(void); -extern void msm_init_gpio(void); -extern int msm_add_sdcc(unsigned int controller, - struct msm_mmc_platform_data *plat, - unsigned int stat_irq, unsigned long stat_irq_flags); - -#if defined(CONFIG_MSM_SMD) && defined(CONFIG_DEBUG_FS) -extern int smd_debugfs_init(void); -#else -static inline int smd_debugfs_init(void) { return 0; } -#endif - -#endif diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c deleted file mode 100644 index d83404d4b328..000000000000 --- a/arch/arm/mach-msm/devices-msm7x00.c +++ /dev/null @@ -1,480 +0,0 @@ -/* linux/arch/arm/mach-msm/devices.c - * - * Copyright (C) 2008 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/clkdev.h> - -#include <mach/irqs.h> -#include <mach/msm_iomap.h> -#include "devices.h" - -#include <asm/mach/flash.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> - -#include "clock.h" -#include "clock-pcom.h" -#include <linux/platform_data/mmc-msm_sdcc.h> - -static struct resource msm_gpio_resources[] = { - { - .start = 32 + 0, - .end = 32 + 0, - .flags = IORESOURCE_IRQ, - }, - { - .start = 32 + 1, - .end = 32 + 1, - .flags = IORESOURCE_IRQ, - }, - { - .start = 0xa9200800, - .end = 0xa9200800 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - .name = "gpio1" - }, - { - .start = 0xa9300C00, - .end = 0xa9300C00 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - .name = "gpio2" - }, -}; - -struct platform_device msm_device_gpio_7201 = { - .name = "gpio-msm-7201", - .num_resources = ARRAY_SIZE(msm_gpio_resources), - .resource = msm_gpio_resources, -}; - -static struct resource resources_uart1[] = { - { - .start = INT_UART1, - .end = INT_UART1, - .flags = IORESOURCE_IRQ, - }, - { - .start = MSM_UART1_PHYS, - .end = MSM_UART1_PHYS + MSM_UART1_SIZE - 1, - .flags = IORESOURCE_MEM, - .name = "uart_resource" - }, -}; - -static struct resource resources_uart2[] = { - { - .start = INT_UART2, - .end = INT_UART2, - .flags = IORESOURCE_IRQ, - }, - { - .start = MSM_UART2_PHYS, - .end = MSM_UART2_PHYS + MSM_UART2_SIZE - 1, - .flags = IORESOURCE_MEM, - .name = "uart_resource" - }, -}; - -static struct resource resources_uart3[] = { - { - .start = INT_UART3, - .end = INT_UART3, - .flags = IORESOURCE_IRQ, - }, - { - .start = MSM_UART3_PHYS, - .end = MSM_UART3_PHYS + MSM_UART3_SIZE - 1, - .flags = IORESOURCE_MEM, - .name = "uart_resource" - }, -}; - -struct platform_device msm_device_uart1 = { - .name = "msm_serial", - .id = 0, - .num_resources = ARRAY_SIZE(resources_uart1), - .resource = resources_uart1, -}; - -struct platform_device msm_device_uart2 = { - .name = "msm_serial", - .id = 1, - .num_resources = ARRAY_SIZE(resources_uart2), - .resource = resources_uart2, -}; - -struct platform_device msm_device_uart3 = { - .name = "msm_serial", - .id = 2, - .num_resources = ARRAY_SIZE(resources_uart3), - .resource = resources_uart3, -}; - -static struct resource resources_i2c[] = { - { - .start = MSM_I2C_PHYS, - .end = MSM_I2C_PHYS + MSM_I2C_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_PWB_I2C, - .end = INT_PWB_I2C, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_i2c = { - .name = "msm_i2c", - .id = 0, - .num_resources = ARRAY_SIZE(resources_i2c), - .resource = resources_i2c, -}; - -static struct resource resources_hsusb[] = { - { - .start = MSM_HSUSB_PHYS, - .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_HS, - .end = INT_USB_HS, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_hsusb = { - .name = "msm_hsusb", - .id = -1, - .num_resources = ARRAY_SIZE(resources_hsusb), - .resource = resources_hsusb, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -struct flash_platform_data msm_nand_data = { - .parts = NULL, - .nr_parts = 0, -}; - -static struct resource resources_nand[] = { - [0] = { - .start = 7, - .end = 7, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device msm_device_nand = { - .name = "msm_nand", - .id = -1, - .num_resources = ARRAY_SIZE(resources_nand), - .resource = resources_nand, - .dev = { - .platform_data = &msm_nand_data, - }, -}; - -struct platform_device msm_device_smd = { - .name = "msm_smd", - .id = -1, -}; - -static struct resource resources_sdc1[] = { - { - .start = MSM_SDC1_PHYS, - .end = MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_SDC1_0, - .end = INT_SDC1_0, - .flags = IORESOURCE_IRQ, - .name = "cmd_irq", - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, - .name = "status_irq" - }, - { - .start = 8, - .end = 8, - .flags = IORESOURCE_DMA, - }, -}; - -static struct resource resources_sdc2[] = { - { - .start = MSM_SDC2_PHYS, - .end = MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_SDC2_0, - .end = INT_SDC2_0, - .flags = IORESOURCE_IRQ, - .name = "cmd_irq", - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, - .name = "status_irq" - }, - { - .start = 8, - .end = 8, - .flags = IORESOURCE_DMA, - }, -}; - -static struct resource resources_sdc3[] = { - { - .start = MSM_SDC3_PHYS, - .end = MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_SDC3_0, - .end = INT_SDC3_0, - .flags = IORESOURCE_IRQ, - .name = "cmd_irq", - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, - .name = "status_irq" - }, - { - .start = 8, - .end = 8, - .flags = IORESOURCE_DMA, - }, -}; - -static struct resource resources_sdc4[] = { - { - .start = MSM_SDC4_PHYS, - .end = MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_SDC4_0, - .end = INT_SDC4_0, - .flags = IORESOURCE_IRQ, - .name = "cmd_irq", - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, - .name = "status_irq" - }, - { - .start = 8, - .end = 8, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device msm_device_sdc1 = { - .name = "msm_sdcc", - .id = 1, - .num_resources = ARRAY_SIZE(resources_sdc1), - .resource = resources_sdc1, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -struct platform_device msm_device_sdc2 = { - .name = "msm_sdcc", - .id = 2, - .num_resources = ARRAY_SIZE(resources_sdc2), - .resource = resources_sdc2, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -struct platform_device msm_device_sdc3 = { - .name = "msm_sdcc", - .id = 3, - .num_resources = ARRAY_SIZE(resources_sdc3), - .resource = resources_sdc3, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -struct platform_device msm_device_sdc4 = { - .name = "msm_sdcc", - .id = 4, - .num_resources = ARRAY_SIZE(resources_sdc4), - .resource = resources_sdc4, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -static struct platform_device *msm_sdcc_devices[] __initdata = { - &msm_device_sdc1, - &msm_device_sdc2, - &msm_device_sdc3, - &msm_device_sdc4, -}; - -int __init msm_add_sdcc(unsigned int controller, - struct msm_mmc_platform_data *plat, - unsigned int stat_irq, unsigned long stat_irq_flags) -{ - struct platform_device *pdev; - struct resource *res; - - if (controller < 1 || controller > 4) - return -EINVAL; - - pdev = msm_sdcc_devices[controller-1]; - pdev->dev.platform_data = plat; - - res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "status_irq"); - if (!res) - return -EINVAL; - else if (stat_irq) { - res->start = res->end = stat_irq; - res->flags &= ~IORESOURCE_DISABLED; - res->flags |= stat_irq_flags; - } - - return platform_device_register(pdev); -} - -static struct resource resources_mddi0[] = { - { - .start = MSM_PMDH_PHYS, - .end = MSM_PMDH_PHYS + MSM_PMDH_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_MDDI_PRI, - .end = INT_MDDI_PRI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource resources_mddi1[] = { - { - .start = MSM_EMDH_PHYS, - .end = MSM_EMDH_PHYS + MSM_EMDH_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_MDDI_EXT, - .end = INT_MDDI_EXT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_mddi0 = { - .name = "msm_mddi", - .id = 0, - .num_resources = ARRAY_SIZE(resources_mddi0), - .resource = resources_mddi0, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -struct platform_device msm_device_mddi1 = { - .name = "msm_mddi", - .id = 1, - .num_resources = ARRAY_SIZE(resources_mddi1), - .resource = resources_mddi1, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -static struct resource resources_mdp[] = { - { - .start = MSM_MDP_PHYS, - .end = MSM_MDP_PHYS + MSM_MDP_SIZE - 1, - .name = "mdp", - .flags = IORESOURCE_MEM - }, - { - .start = INT_MDP, - .end = INT_MDP, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_mdp = { - .name = "msm_mdp", - .id = 0, - .num_resources = ARRAY_SIZE(resources_mdp), - .resource = resources_mdp, -}; - -static struct clk_pcom_desc msm_clocks_7x01a[] = { - CLK_PCOM("adm_clk", ADM_CLK, NULL, 0), - CLK_PCOM("adsp_clk", ADSP_CLK, NULL, 0), - CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, 0), - CLK_PCOM("ebi2_clk", EBI2_CLK, NULL, 0), - CLK_PCOM("ecodec_clk", ECODEC_CLK, NULL, 0), - CLK_PCOM("emdh_clk", EMDH_CLK, NULL, OFF), - CLK_PCOM("gp_clk", GP_CLK, NULL, 0), - CLK_PCOM("grp_clk", GRP_3D_CLK, NULL, OFF), - CLK_PCOM("i2c_clk", I2C_CLK, "msm_i2c.0", 0), - CLK_PCOM("icodec_rx_clk", ICODEC_RX_CLK, NULL, 0), - CLK_PCOM("icodec_tx_clk", ICODEC_TX_CLK, NULL, 0), - CLK_PCOM("imem_clk", IMEM_CLK, NULL, OFF), - CLK_PCOM("mdc_clk", MDC_CLK, NULL, 0), - CLK_PCOM("mdp_clk", MDP_CLK, NULL, OFF), - CLK_PCOM("pbus_clk", PBUS_CLK, NULL, 0), - CLK_PCOM("pcm_clk", PCM_CLK, NULL, 0), - CLK_PCOM("mddi_clk", PMDH_CLK, NULL, OFF | CLK_MINMAX), - CLK_PCOM("sdac_clk", SDAC_CLK, NULL, OFF), - CLK_PCOM("sdc_clk", SDC1_CLK, "msm_sdcc.1", OFF), - CLK_PCOM("sdc_pclk", SDC1_P_CLK, "msm_sdcc.1", OFF), - CLK_PCOM("sdc_clk", SDC2_CLK, "msm_sdcc.2", OFF), - CLK_PCOM("sdc_pclk", SDC2_P_CLK, "msm_sdcc.2", OFF), - CLK_PCOM("sdc_clk", SDC3_CLK, "msm_sdcc.3", OFF), - CLK_PCOM("sdc_pclk", SDC3_P_CLK, "msm_sdcc.3", OFF), - CLK_PCOM("sdc_clk", SDC4_CLK, "msm_sdcc.4", OFF), - CLK_PCOM("sdc_pclk", SDC4_P_CLK, "msm_sdcc.4", OFF), - CLK_PCOM("tsif_clk", TSIF_CLK, NULL, 0), - CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0), - CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), - CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), - CLK_PCOM("core", UART1_CLK, "msm_serial.0", OFF), - CLK_PCOM("core", UART2_CLK, "msm_serial.1", 0), - CLK_PCOM("core", UART3_CLK, "msm_serial.2", OFF), - CLK_PCOM("uart1dm_clk", UART1DM_CLK, NULL, OFF), - CLK_PCOM("uart2dm_clk", UART2DM_CLK, NULL, 0), - CLK_PCOM("usb_hs_clk", USB_HS_CLK, "msm_hsusb", OFF), - CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, "msm_hsusb", OFF), - CLK_PCOM("usb_otg_clk", USB_OTG_CLK, NULL, 0), - CLK_PCOM("vdc_clk", VDC_CLK, NULL, OFF ), - CLK_PCOM("vfe_clk", VFE_CLK, NULL, OFF), - CLK_PCOM("vfe_mdc_clk", VFE_MDC_CLK, NULL, OFF), -}; - -static struct pcom_clk_pdata msm_clock_7x01a_pdata = { - .lookup = msm_clocks_7x01a, - .num_lookups = ARRAY_SIZE(msm_clocks_7x01a), -}; - -struct platform_device msm_clock_7x01a = { - .name = "msm-clock-pcom", - .dev.platform_data = &msm_clock_7x01a_pdata, -}; diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c deleted file mode 100644 index c15ea8ab20a7..000000000000 --- a/arch/arm/mach-msm/devices-msm7x30.c +++ /dev/null @@ -1,246 +0,0 @@ -/* - * Copyright (C) 2008 Google, Inc. - * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <linux/dma-mapping.h> -#include <linux/clkdev.h> -#include <mach/irqs.h> -#include <mach/msm_iomap.h> -#include <mach/dma.h> - -#include "devices.h" -#include "smd_private.h" -#include "common.h" - -#include <asm/mach/flash.h> - -#include "clock.h" -#include "clock-pcom.h" - -#include <linux/platform_data/mmc-msm_sdcc.h> - -static struct resource msm_gpio_resources[] = { - { - .start = 32 + 18, - .end = 32 + 18, - .flags = IORESOURCE_IRQ, - }, - { - .start = 32 + 19, - .end = 32 + 19, - .flags = IORESOURCE_IRQ, - }, - { - .start = 0xac001000, - .end = 0xac001000 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - .name = "gpio1" - }, - { - .start = 0xac101400, - .end = 0xac101400 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - .name = "gpio2" - }, -}; - -struct platform_device msm_device_gpio_7x30 = { - .name = "gpio-msm-7x30", - .num_resources = ARRAY_SIZE(msm_gpio_resources), - .resource = msm_gpio_resources, -}; - -static struct resource resources_uart2[] = { - { - .start = INT_UART2, - .end = INT_UART2, - .flags = IORESOURCE_IRQ, - }, - { - .start = MSM_UART2_PHYS, - .end = MSM_UART2_PHYS + MSM_UART2_SIZE - 1, - .flags = IORESOURCE_MEM, - .name = "uart_resource" - }, -}; - -struct platform_device msm_device_uart2 = { - .name = "msm_serial", - .id = 1, - .num_resources = ARRAY_SIZE(resources_uart2), - .resource = resources_uart2, -}; - -struct platform_device msm_device_smd = { - .name = "msm_smd", - .id = -1, -}; - -static struct resource resources_otg[] = { - { - .start = MSM_HSUSB_PHYS, - .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_HS, - .end = INT_USB_HS, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_otg = { - .name = "msm_otg", - .id = -1, - .num_resources = ARRAY_SIZE(resources_otg), - .resource = resources_otg, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -static struct resource resources_hsusb[] = { - { - .start = MSM_HSUSB_PHYS, - .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_HS, - .end = INT_USB_HS, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_hsusb = { - .name = "msm_hsusb", - .id = -1, - .num_resources = ARRAY_SIZE(resources_hsusb), - .resource = resources_hsusb, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -static u64 dma_mask = 0xffffffffULL; -static struct resource resources_hsusb_host[] = { - { - .start = MSM_HSUSB_PHYS, - .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_HS, - .end = INT_USB_HS, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_hsusb_host = { - .name = "msm_hsusb_host", - .id = -1, - .num_resources = ARRAY_SIZE(resources_hsusb_host), - .resource = resources_hsusb_host, - .dev = { - .dma_mask = &dma_mask, - .coherent_dma_mask = 0xffffffffULL, - }, -}; - -static struct clk_pcom_desc msm_clocks_7x30[] = { - CLK_PCOM("adm_clk", ADM_CLK, NULL, 0), - CLK_PCOM("adsp_clk", ADSP_CLK, NULL, 0), - CLK_PCOM("cam_m_clk", CAM_M_CLK, NULL, 0), - CLK_PCOM("camif_pad_pclk", CAMIF_PAD_P_CLK, NULL, OFF), - CLK_PCOM("ce_clk", CE_CLK, NULL, 0), - CLK_PCOM("codec_ssbi_clk", CODEC_SSBI_CLK, NULL, 0), - CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, CLK_MIN), - CLK_PCOM("ecodec_clk", ECODEC_CLK, NULL, 0), - CLK_PCOM("emdh_clk", EMDH_CLK, NULL, OFF | CLK_MINMAX), - CLK_PCOM("emdh_pclk", EMDH_P_CLK, NULL, OFF), - CLK_PCOM("gp_clk", GP_CLK, NULL, 0), - CLK_PCOM("grp_2d_clk", GRP_2D_CLK, NULL, 0), - CLK_PCOM("grp_2d_pclk", GRP_2D_P_CLK, NULL, 0), - CLK_PCOM("grp_clk", GRP_3D_CLK, NULL, 0), - CLK_PCOM("grp_pclk", GRP_3D_P_CLK, NULL, 0), - CLK_PCOM("hdmi_clk", HDMI_CLK, NULL, 0), - CLK_PCOM("imem_clk", IMEM_CLK, NULL, OFF), - CLK_PCOM("jpeg_clk", JPEG_CLK, NULL, OFF), - CLK_PCOM("jpeg_pclk", JPEG_P_CLK, NULL, OFF), - CLK_PCOM("lpa_codec_clk", LPA_CODEC_CLK, NULL, 0), - CLK_PCOM("lpa_core_clk", LPA_CORE_CLK, NULL, 0), - CLK_PCOM("lpa_pclk", LPA_P_CLK, NULL, 0), - CLK_PCOM("mdc_clk", MDC_CLK, NULL, 0), - CLK_PCOM("mddi_clk", PMDH_CLK, NULL, OFF | CLK_MINMAX), - CLK_PCOM("mddi_pclk", PMDH_P_CLK, NULL, 0), - CLK_PCOM("mdp_clk", MDP_CLK, NULL, OFF), - CLK_PCOM("mdp_pclk", MDP_P_CLK, NULL, 0), - CLK_PCOM("mdp_lcdc_pclk_clk", MDP_LCDC_PCLK_CLK, NULL, 0), - CLK_PCOM("mdp_lcdc_pad_pclk_clk", MDP_LCDC_PAD_PCLK_CLK, NULL, 0), - CLK_PCOM("mdp_vsync_clk", MDP_VSYNC_CLK, NULL, 0), - CLK_PCOM("mfc_clk", MFC_CLK, NULL, 0), - CLK_PCOM("mfc_div2_clk", MFC_DIV2_CLK, NULL, 0), - CLK_PCOM("mfc_pclk", MFC_P_CLK, NULL, 0), - CLK_PCOM("mi2s_m_clk", MI2S_M_CLK, NULL, 0), - CLK_PCOM("mi2s_s_clk", MI2S_S_CLK, NULL, 0), - CLK_PCOM("mi2s_codec_rx_m_clk", MI2S_CODEC_RX_M_CLK, NULL, 0), - CLK_PCOM("mi2s_codec_rx_s_clk", MI2S_CODEC_RX_S_CLK, NULL, 0), - CLK_PCOM("mi2s_codec_tx_m_clk", MI2S_CODEC_TX_M_CLK, NULL, 0), - CLK_PCOM("mi2s_codec_tx_s_clk", MI2S_CODEC_TX_S_CLK, NULL, 0), - CLK_PCOM("pbus_clk", PBUS_CLK, NULL, CLK_MIN), - CLK_PCOM("pcm_clk", PCM_CLK, NULL, 0), - CLK_PCOM("rotator_clk", AXI_ROTATOR_CLK, NULL, 0), - CLK_PCOM("rotator_imem_clk", ROTATOR_IMEM_CLK, NULL, OFF), - CLK_PCOM("rotator_pclk", ROTATOR_P_CLK, NULL, OFF), - CLK_PCOM("sdac_clk", SDAC_CLK, NULL, OFF), - CLK_PCOM("spi_clk", SPI_CLK, NULL, 0), - CLK_PCOM("spi_pclk", SPI_P_CLK, NULL, 0), - CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), - CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), - CLK_PCOM("core", UART2_CLK, "msm_serial.1", 0), - CLK_PCOM("usb_phy_clk", USB_PHY_CLK, NULL, 0), - CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF), - CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, NULL, OFF), - CLK_PCOM("usb_hs_core_clk", USB_HS_CORE_CLK, NULL, OFF), - CLK_PCOM("usb_hs2_clk", USB_HS2_CLK, NULL, OFF), - CLK_PCOM("usb_hs2_pclk", USB_HS2_P_CLK, NULL, OFF), - CLK_PCOM("usb_hs2_core_clk", USB_HS2_CORE_CLK, NULL, OFF), - CLK_PCOM("usb_hs3_clk", USB_HS3_CLK, NULL, OFF), - CLK_PCOM("usb_hs3_pclk", USB_HS3_P_CLK, NULL, OFF), - CLK_PCOM("usb_hs3_core_clk", USB_HS3_CORE_CLK, NULL, OFF), - CLK_PCOM("vdc_clk", VDC_CLK, NULL, OFF | CLK_MIN), - CLK_PCOM("vfe_camif_clk", VFE_CAMIF_CLK, NULL, 0), - CLK_PCOM("vfe_clk", VFE_CLK, NULL, 0), - CLK_PCOM("vfe_mdc_clk", VFE_MDC_CLK, NULL, 0), - CLK_PCOM("vfe_pclk", VFE_P_CLK, NULL, OFF), - CLK_PCOM("vpe_clk", VPE_CLK, NULL, 0), - - /* 7x30 v2 hardware only. */ - CLK_PCOM("csi_clk", CSI0_CLK, NULL, 0), - CLK_PCOM("csi_pclk", CSI0_P_CLK, NULL, 0), - CLK_PCOM("csi_vfe_clk", CSI0_VFE_CLK, NULL, 0), -}; - -static struct pcom_clk_pdata msm_clock_7x30_pdata = { - .lookup = msm_clocks_7x30, - .num_lookups = ARRAY_SIZE(msm_clocks_7x30), -}; - -struct platform_device msm_clock_7x30 = { - .name = "msm-clock-pcom", - .dev.platform_data = &msm_clock_7x30_pdata, -}; diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c deleted file mode 100644 index 9e1e9ce07b1a..000000000000 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ /dev/null @@ -1,388 +0,0 @@ -/* - * Copyright (C) 2008 Google, Inc. - * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/clkdev.h> -#include <linux/dma-mapping.h> - -#include <mach/irqs.h> -#include <mach/msm_iomap.h> -#include <mach/dma.h> - -#include "devices.h" -#include "common.h" - -#include <asm/mach/flash.h> - -#include <linux/platform_data/mmc-msm_sdcc.h> -#include "clock.h" -#include "clock-pcom.h" - -static struct resource msm_gpio_resources[] = { - { - .start = 64 + 165 + 9, - .end = 64 + 165 + 9, - .flags = IORESOURCE_IRQ, - }, - { - .start = 64 + 165 + 10, - .end = 64 + 165 + 10, - .flags = IORESOURCE_IRQ, - }, - { - .start = 0xa9000800, - .end = 0xa9000800 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - .name = "gpio1" - }, - { - .start = 0xa9100C00, - .end = 0xa9100C00 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - .name = "gpio2" - }, -}; - -struct platform_device msm_device_gpio_8x50 = { - .name = "gpio-msm-8x50", - .num_resources = ARRAY_SIZE(msm_gpio_resources), - .resource = msm_gpio_resources, -}; - -static struct resource resources_uart3[] = { - { - .start = INT_UART3, - .end = INT_UART3, - .flags = IORESOURCE_IRQ, - }, - { - .start = MSM_UART3_PHYS, - .end = MSM_UART3_PHYS + MSM_UART3_SIZE - 1, - .flags = IORESOURCE_MEM, - .name = "uart_resource" - }, -}; - -struct platform_device msm_device_uart3 = { - .name = "msm_serial", - .id = 2, - .num_resources = ARRAY_SIZE(resources_uart3), - .resource = resources_uart3, -}; - -struct platform_device msm_device_smd = { - .name = "msm_smd", - .id = -1, -}; - -static struct resource resources_otg[] = { - { - .start = MSM_HSUSB_PHYS, - .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_HS, - .end = INT_USB_HS, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_otg = { - .name = "msm_otg", - .id = -1, - .num_resources = ARRAY_SIZE(resources_otg), - .resource = resources_otg, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -static struct resource resources_hsusb[] = { - { - .start = MSM_HSUSB_PHYS, - .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_HS, - .end = INT_USB_HS, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_hsusb = { - .name = "msm_hsusb", - .id = -1, - .num_resources = ARRAY_SIZE(resources_hsusb), - .resource = resources_hsusb, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -static u64 dma_mask = 0xffffffffULL; -static struct resource resources_hsusb_host[] = { - { - .start = MSM_HSUSB_PHYS, - .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_HS, - .end = INT_USB_HS, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_hsusb_host = { - .name = "msm_hsusb_host", - .id = -1, - .num_resources = ARRAY_SIZE(resources_hsusb_host), - .resource = resources_hsusb_host, - .dev = { - .dma_mask = &dma_mask, - .coherent_dma_mask = 0xffffffffULL, - }, -}; - -static struct resource resources_sdc1[] = { - { - .start = MSM_SDC1_PHYS, - .end = MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_SDC1_0, - .end = INT_SDC1_0, - .flags = IORESOURCE_IRQ, - .name = "cmd_irq", - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, - .name = "status_irq" - }, - { - .start = 8, - .end = 8, - .flags = IORESOURCE_DMA, - }, -}; - -static struct resource resources_sdc2[] = { - { - .start = MSM_SDC2_PHYS, - .end = MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_SDC2_0, - .end = INT_SDC2_0, - .flags = IORESOURCE_IRQ, - .name = "cmd_irq", - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, - .name = "status_irq" - }, - { - .start = 8, - .end = 8, - .flags = IORESOURCE_DMA, - }, -}; - -static struct resource resources_sdc3[] = { - { - .start = MSM_SDC3_PHYS, - .end = MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_SDC3_0, - .end = INT_SDC3_0, - .flags = IORESOURCE_IRQ, - .name = "cmd_irq", - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, - .name = "status_irq" - }, - { - .start = 8, - .end = 8, - .flags = IORESOURCE_DMA, - }, -}; - -static struct resource resources_sdc4[] = { - { - .start = MSM_SDC4_PHYS, - .end = MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_SDC4_0, - .end = INT_SDC4_0, - .flags = IORESOURCE_IRQ, - .name = "cmd_irq", - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, - .name = "status_irq" - }, - { - .start = 8, - .end = 8, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device msm_device_sdc1 = { - .name = "msm_sdcc", - .id = 1, - .num_resources = ARRAY_SIZE(resources_sdc1), - .resource = resources_sdc1, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -struct platform_device msm_device_sdc2 = { - .name = "msm_sdcc", - .id = 2, - .num_resources = ARRAY_SIZE(resources_sdc2), - .resource = resources_sdc2, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -struct platform_device msm_device_sdc3 = { - .name = "msm_sdcc", - .id = 3, - .num_resources = ARRAY_SIZE(resources_sdc3), - .resource = resources_sdc3, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -struct platform_device msm_device_sdc4 = { - .name = "msm_sdcc", - .id = 4, - .num_resources = ARRAY_SIZE(resources_sdc4), - .resource = resources_sdc4, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -static struct platform_device *msm_sdcc_devices[] __initdata = { - &msm_device_sdc1, - &msm_device_sdc2, - &msm_device_sdc3, - &msm_device_sdc4, -}; - -int __init msm_add_sdcc(unsigned int controller, - struct msm_mmc_platform_data *plat, - unsigned int stat_irq, unsigned long stat_irq_flags) -{ - struct platform_device *pdev; - struct resource *res; - - if (controller < 1 || controller > 4) - return -EINVAL; - - pdev = msm_sdcc_devices[controller-1]; - pdev->dev.platform_data = plat; - - res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "status_irq"); - if (!res) - return -EINVAL; - else if (stat_irq) { - res->start = res->end = stat_irq; - res->flags &= ~IORESOURCE_DISABLED; - res->flags |= stat_irq_flags; - } - - return platform_device_register(pdev); -} - -static struct clk_pcom_desc msm_clocks_8x50[] = { - CLK_PCOM("adm_clk", ADM_CLK, NULL, 0), - CLK_PCOM("ce_clk", CE_CLK, NULL, 0), - CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, CLK_MIN), - CLK_PCOM("ebi2_clk", EBI2_CLK, NULL, 0), - CLK_PCOM("ecodec_clk", ECODEC_CLK, NULL, 0), - CLK_PCOM("emdh_clk", EMDH_CLK, NULL, OFF | CLK_MINMAX), - CLK_PCOM("gp_clk", GP_CLK, NULL, 0), - CLK_PCOM("grp_clk", GRP_3D_CLK, NULL, 0), - CLK_PCOM("i2c_clk", I2C_CLK, NULL, 0), - CLK_PCOM("icodec_rx_clk", ICODEC_RX_CLK, NULL, 0), - CLK_PCOM("icodec_tx_clk", ICODEC_TX_CLK, NULL, 0), - CLK_PCOM("imem_clk", IMEM_CLK, NULL, OFF), - CLK_PCOM("mdc_clk", MDC_CLK, NULL, 0), - CLK_PCOM("mddi_clk", PMDH_CLK, NULL, OFF | CLK_MINMAX), - CLK_PCOM("mdp_clk", MDP_CLK, NULL, OFF), - CLK_PCOM("mdp_lcdc_pclk_clk", MDP_LCDC_PCLK_CLK, NULL, 0), - CLK_PCOM("mdp_lcdc_pad_pclk_clk", MDP_LCDC_PAD_PCLK_CLK, NULL, 0), - CLK_PCOM("mdp_vsync_clk", MDP_VSYNC_CLK, NULL, 0), - CLK_PCOM("pbus_clk", PBUS_CLK, NULL, CLK_MIN), - CLK_PCOM("pcm_clk", PCM_CLK, NULL, 0), - CLK_PCOM("sdac_clk", SDAC_CLK, NULL, OFF), - CLK_PCOM("sdc_clk", SDC1_CLK, "msm_sdcc.1", OFF), - CLK_PCOM("sdc_pclk", SDC1_P_CLK, "msm_sdcc.1", OFF), - CLK_PCOM("sdc_clk", SDC2_CLK, "msm_sdcc.2", OFF), - CLK_PCOM("sdc_pclk", SDC2_P_CLK, "msm_sdcc.2", OFF), - CLK_PCOM("sdc_clk", SDC3_CLK, "msm_sdcc.3", OFF), - CLK_PCOM("sdc_pclk", SDC3_P_CLK, "msm_sdcc.3", OFF), - CLK_PCOM("sdc_clk", SDC4_CLK, "msm_sdcc.4", OFF), - CLK_PCOM("sdc_pclk", SDC4_P_CLK, "msm_sdcc.4", OFF), - CLK_PCOM("spi_clk", SPI_CLK, NULL, 0), - CLK_PCOM("tsif_clk", TSIF_CLK, NULL, 0), - CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0), - CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), - CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), - CLK_PCOM("core", UART1_CLK, NULL, OFF), - CLK_PCOM("core", UART2_CLK, NULL, 0), - CLK_PCOM("core", UART3_CLK, "msm_serial.2", OFF), - CLK_PCOM("uartdm_clk", UART1DM_CLK, NULL, OFF), - CLK_PCOM("uartdm_clk", UART2DM_CLK, NULL, 0), - CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF), - CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, NULL, OFF), - CLK_PCOM("usb_otg_clk", USB_OTG_CLK, NULL, 0), - CLK_PCOM("vdc_clk", VDC_CLK, NULL, OFF | CLK_MIN), - CLK_PCOM("vfe_clk", VFE_CLK, NULL, OFF), - CLK_PCOM("vfe_mdc_clk", VFE_MDC_CLK, NULL, OFF), - CLK_PCOM("vfe_axi_clk", VFE_AXI_CLK, NULL, OFF), - CLK_PCOM("usb_hs2_clk", USB_HS2_CLK, NULL, OFF), - CLK_PCOM("usb_hs2_pclk", USB_HS2_P_CLK, NULL, OFF), - CLK_PCOM("usb_hs3_clk", USB_HS3_CLK, NULL, OFF), - CLK_PCOM("usb_hs3_pclk", USB_HS3_P_CLK, NULL, OFF), - CLK_PCOM("usb_phy_clk", USB_PHY_CLK, NULL, 0), -}; - -static struct pcom_clk_pdata msm_clock_8x50_pdata = { - .lookup = msm_clocks_8x50, - .num_lookups = ARRAY_SIZE(msm_clocks_8x50), -}; - -struct platform_device msm_clock_8x50 = { - .name = "msm-clock-pcom", - .dev.platform_data = &msm_clock_8x50_pdata, -}; diff --git a/arch/arm/mach-msm/devices.h b/arch/arm/mach-msm/devices.h deleted file mode 100644 index dccefad9f9b9..000000000000 --- a/arch/arm/mach-msm/devices.h +++ /dev/null @@ -1,53 +0,0 @@ -/* linux/arch/arm/mach-msm/devices.h - * - * Copyright (C) 2008 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ARCH_ARM_MACH_MSM_DEVICES_H -#define __ARCH_ARM_MACH_MSM_DEVICES_H - -extern struct platform_device msm_device_gpio_7201; -extern struct platform_device msm_device_gpio_7x30; -extern struct platform_device msm_device_gpio_8x50; - -extern struct platform_device msm_device_uart1; -extern struct platform_device msm_device_uart2; -extern struct platform_device msm_device_uart3; - -extern struct platform_device msm8960_device_uart_gsbi2; -extern struct platform_device msm8960_device_uart_gsbi5; - -extern struct platform_device msm_device_sdc1; -extern struct platform_device msm_device_sdc2; -extern struct platform_device msm_device_sdc3; -extern struct platform_device msm_device_sdc4; - -extern struct platform_device msm_device_hsusb; -extern struct platform_device msm_device_otg; -extern struct platform_device msm_device_hsusb_host; - -extern struct platform_device msm_device_i2c; - -extern struct platform_device msm_device_smd; - -extern struct platform_device msm_device_nand; - -extern struct platform_device msm_device_mddi0; -extern struct platform_device msm_device_mddi1; -extern struct platform_device msm_device_mdp; - -extern struct platform_device msm_clock_7x01a; -extern struct platform_device msm_clock_7x30; -extern struct platform_device msm_clock_8x50; - -#endif diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c deleted file mode 100644 index fb9762464718..000000000000 --- a/arch/arm/mach-msm/dma.c +++ /dev/null @@ -1,298 +0,0 @@ -/* linux/arch/arm/mach-msm/dma.c - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/interrupt.h> -#include <linux/completion.h> -#include <linux/module.h> -#include <mach/dma.h> -#include <mach/msm_iomap.h> - -#define MSM_DMOV_CHANNEL_COUNT 16 - -#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2)) -#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2)) -#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2)) -#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2)) - -#if defined(CONFIG_ARCH_MSM7X30) -#define DMOV_SD_AARM DMOV_SD2 -#else -#define DMOV_SD_AARM DMOV_SD3 -#endif - -#define DMOV_CMD_PTR(ch) DMOV_SD_AARM(0x000, ch) -#define DMOV_RSLT(ch) DMOV_SD_AARM(0x040, ch) -#define DMOV_FLUSH0(ch) DMOV_SD_AARM(0x080, ch) -#define DMOV_FLUSH1(ch) DMOV_SD_AARM(0x0C0, ch) -#define DMOV_FLUSH2(ch) DMOV_SD_AARM(0x100, ch) -#define DMOV_FLUSH3(ch) DMOV_SD_AARM(0x140, ch) -#define DMOV_FLUSH4(ch) DMOV_SD_AARM(0x180, ch) -#define DMOV_FLUSH5(ch) DMOV_SD_AARM(0x1C0, ch) - -#define DMOV_STATUS(ch) DMOV_SD_AARM(0x200, ch) -#define DMOV_ISR DMOV_SD_AARM(0x380, 0) - -#define DMOV_CONFIG(ch) DMOV_SD_AARM(0x300, ch) - -enum { - MSM_DMOV_PRINT_ERRORS = 1, - MSM_DMOV_PRINT_IO = 2, - MSM_DMOV_PRINT_FLOW = 4 -}; - -static DEFINE_SPINLOCK(msm_dmov_lock); -static struct clk *msm_dmov_clk; -static unsigned int channel_active; -static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT]; -static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT]; -unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS; - -#define MSM_DMOV_DPRINTF(mask, format, args...) \ - do { \ - if ((mask) & msm_dmov_print_mask) \ - printk(KERN_ERR format, args); \ - } while (0) -#define PRINT_ERROR(format, args...) \ - MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_ERRORS, format, args); -#define PRINT_IO(format, args...) \ - MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_IO, format, args); -#define PRINT_FLOW(format, args...) \ - MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_FLOW, format, args); - -void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful) -{ - writel((graceful << 31), DMOV_FLUSH0(id)); -} -EXPORT_SYMBOL_GPL(msm_dmov_stop_cmd); - -void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) -{ - unsigned long irq_flags; - unsigned int status; - - spin_lock_irqsave(&msm_dmov_lock, irq_flags); - if (!channel_active) - clk_enable(msm_dmov_clk); - dsb(); - status = readl(DMOV_STATUS(id)); - if (list_empty(&ready_commands[id]) && - (status & DMOV_STATUS_CMD_PTR_RDY)) { -#if 0 - if (list_empty(&active_commands[id])) { - PRINT_FLOW("msm_dmov_enqueue_cmd(%d), enable interrupt\n", id); - writel(DMOV_CONFIG_IRQ_EN, DMOV_CONFIG(id)); - } -#endif - if (cmd->execute_func) - cmd->execute_func(cmd); - PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status); - list_add_tail(&cmd->list, &active_commands[id]); - if (!channel_active) - enable_irq(INT_ADM_AARM); - channel_active |= 1U << id; - writel(cmd->cmdptr, DMOV_CMD_PTR(id)); - } else { - if (!channel_active) - clk_disable(msm_dmov_clk); - if (list_empty(&active_commands[id])) - PRINT_ERROR("msm_dmov_enqueue_cmd(%d), error datamover stalled, status %x\n", id, status); - - PRINT_IO("msm_dmov_enqueue_cmd(%d), enqueue command, status %x\n", id, status); - list_add_tail(&cmd->list, &ready_commands[id]); - } - spin_unlock_irqrestore(&msm_dmov_lock, irq_flags); -} -EXPORT_SYMBOL_GPL(msm_dmov_enqueue_cmd); - -struct msm_dmov_exec_cmdptr_cmd { - struct msm_dmov_cmd dmov_cmd; - struct completion complete; - unsigned id; - unsigned int result; - struct msm_dmov_errdata err; -}; - -static void -dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd, - unsigned int result, - struct msm_dmov_errdata *err) -{ - struct msm_dmov_exec_cmdptr_cmd *cmd = container_of(_cmd, struct msm_dmov_exec_cmdptr_cmd, dmov_cmd); - cmd->result = result; - if (result != 0x80000002 && err) - memcpy(&cmd->err, err, sizeof(struct msm_dmov_errdata)); - - complete(&cmd->complete); -} - -int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) -{ - struct msm_dmov_exec_cmdptr_cmd cmd; - - PRINT_FLOW("dmov_exec_cmdptr(%d, %x)\n", id, cmdptr); - - cmd.dmov_cmd.cmdptr = cmdptr; - cmd.dmov_cmd.complete_func = dmov_exec_cmdptr_complete_func; - cmd.dmov_cmd.execute_func = NULL; - cmd.id = id; - init_completion(&cmd.complete); - - msm_dmov_enqueue_cmd(id, &cmd.dmov_cmd); - wait_for_completion(&cmd.complete); - - if (cmd.result != 0x80000002) { - PRINT_ERROR("dmov_exec_cmdptr(%d): ERROR, result: %x\n", id, cmd.result); - PRINT_ERROR("dmov_exec_cmdptr(%d): flush: %x %x %x %x\n", - id, cmd.err.flush[0], cmd.err.flush[1], cmd.err.flush[2], cmd.err.flush[3]); - return -EIO; - } - PRINT_FLOW("dmov_exec_cmdptr(%d, %x) done\n", id, cmdptr); - return 0; -} - - -static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id) -{ - unsigned int int_status, mask, id; - unsigned long irq_flags; - unsigned int ch_status; - unsigned int ch_result; - struct msm_dmov_cmd *cmd; - - spin_lock_irqsave(&msm_dmov_lock, irq_flags); - - int_status = readl(DMOV_ISR); /* read and clear interrupt */ - PRINT_FLOW("msm_datamover_irq_handler: DMOV_ISR %x\n", int_status); - - while (int_status) { - mask = int_status & -int_status; - id = fls(mask) - 1; - PRINT_FLOW("msm_datamover_irq_handler %08x %08x id %d\n", int_status, mask, id); - int_status &= ~mask; - ch_status = readl(DMOV_STATUS(id)); - if (!(ch_status & DMOV_STATUS_RSLT_VALID)) { - PRINT_FLOW("msm_datamover_irq_handler id %d, result not valid %x\n", id, ch_status); - continue; - } - do { - ch_result = readl(DMOV_RSLT(id)); - if (list_empty(&active_commands[id])) { - PRINT_ERROR("msm_datamover_irq_handler id %d, got result " - "with no active command, status %x, result %x\n", - id, ch_status, ch_result); - cmd = NULL; - } else - cmd = list_entry(active_commands[id].next, typeof(*cmd), list); - PRINT_FLOW("msm_datamover_irq_handler id %d, status %x, result %x\n", id, ch_status, ch_result); - if (ch_result & DMOV_RSLT_DONE) { - PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", - id, ch_status); - PRINT_IO("msm_datamover_irq_handler id %d, got result " - "for %p, result %x\n", id, cmd, ch_result); - if (cmd) { - list_del(&cmd->list); - dsb(); - cmd->complete_func(cmd, ch_result, NULL); - } - } - if (ch_result & DMOV_RSLT_FLUSH) { - struct msm_dmov_errdata errdata; - - errdata.flush[0] = readl(DMOV_FLUSH0(id)); - errdata.flush[1] = readl(DMOV_FLUSH1(id)); - errdata.flush[2] = readl(DMOV_FLUSH2(id)); - errdata.flush[3] = readl(DMOV_FLUSH3(id)); - errdata.flush[4] = readl(DMOV_FLUSH4(id)); - errdata.flush[5] = readl(DMOV_FLUSH5(id)); - PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); - PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]); - if (cmd) { - list_del(&cmd->list); - dsb(); - cmd->complete_func(cmd, ch_result, &errdata); - } - } - if (ch_result & DMOV_RSLT_ERROR) { - struct msm_dmov_errdata errdata; - - errdata.flush[0] = readl(DMOV_FLUSH0(id)); - errdata.flush[1] = readl(DMOV_FLUSH1(id)); - errdata.flush[2] = readl(DMOV_FLUSH2(id)); - errdata.flush[3] = readl(DMOV_FLUSH3(id)); - errdata.flush[4] = readl(DMOV_FLUSH4(id)); - errdata.flush[5] = readl(DMOV_FLUSH5(id)); - - PRINT_ERROR("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); - PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]); - if (cmd) { - list_del(&cmd->list); - dsb(); - cmd->complete_func(cmd, ch_result, &errdata); - } - /* this does not seem to work, once we get an error */ - /* the datamover will no longer accept commands */ - writel(0, DMOV_FLUSH0(id)); - } - ch_status = readl(DMOV_STATUS(id)); - PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); - if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) { - cmd = list_entry(ready_commands[id].next, typeof(*cmd), list); - list_move_tail(&cmd->list, &active_commands[id]); - if (cmd->execute_func) - cmd->execute_func(cmd); - PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id); - writel(cmd->cmdptr, DMOV_CMD_PTR(id)); - } - } while (ch_status & DMOV_STATUS_RSLT_VALID); - if (list_empty(&active_commands[id]) && list_empty(&ready_commands[id])) - channel_active &= ~(1U << id); - PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); - } - - if (!channel_active) { - disable_irq_nosync(INT_ADM_AARM); - clk_disable(msm_dmov_clk); - } - - spin_unlock_irqrestore(&msm_dmov_lock, irq_flags); - return IRQ_HANDLED; -} - -static int __init msm_init_datamover(void) -{ - int i; - int ret; - struct clk *clk; - - for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) { - INIT_LIST_HEAD(&ready_commands[i]); - INIT_LIST_HEAD(&active_commands[i]); - writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i)); - } - clk = clk_get(NULL, "adm_clk"); - if (IS_ERR(clk)) - return PTR_ERR(clk); - clk_prepare(clk); - msm_dmov_clk = clk; - ret = request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL); - if (ret) - return ret; - disable_irq(INT_ADM_AARM); - return 0; -} -module_init(msm_init_datamover); diff --git a/arch/arm/mach-msm/gpiomux-8x50.c b/arch/arm/mach-msm/gpiomux-8x50.c deleted file mode 100644 index f7a4ea593c95..000000000000 --- a/arch/arm/mach-msm/gpiomux-8x50.c +++ /dev/null @@ -1,51 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#include "gpiomux.h" - -#if defined(CONFIG_MMC_MSM) || defined(CONFIG_MMC_MSM_MODULE) - #define SDCC_DAT_0_3_CMD_ACTV_CFG (GPIOMUX_VALID | GPIOMUX_PULL_UP\ - | GPIOMUX_FUNC_1 | GPIOMUX_DRV_8MA) - #define SDCC_CLK_ACTV_CFG (GPIOMUX_VALID | GPIOMUX_PULL_NONE\ - | GPIOMUX_FUNC_1 | GPIOMUX_DRV_8MA) -#else - #define SDCC_DAT_0_3_CMD_ACTV_CFG 0 - #define SDCC_CLK_ACTV_CFG 0 -#endif - -#define SDC1_SUSPEND_CONFIG (GPIOMUX_VALID | GPIOMUX_PULL_DOWN\ - | GPIOMUX_FUNC_GPIO | GPIOMUX_DRV_2MA) - -struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { - [86] = { /* UART3 RX */ - .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | - GPIOMUX_FUNC_1 | GPIOMUX_VALID, - }, - [87] = { /* UART3 TX */ - .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | - GPIOMUX_FUNC_1 | GPIOMUX_VALID, - }, - /* SDC1 data[3:0] & CMD */ - [51 ... 55] = { - .active = SDCC_DAT_0_3_CMD_ACTV_CFG, - .suspended = SDC1_SUSPEND_CONFIG - }, - /* SDC1 CLK */ - [56] = { - .active = SDCC_CLK_ACTV_CFG, - .suspended = SDC1_SUSPEND_CONFIG - }, -}; diff --git a/arch/arm/mach-msm/gpiomux-v1.h b/arch/arm/mach-msm/gpiomux-v1.h deleted file mode 100644 index 71d86feba450..000000000000 --- a/arch/arm/mach-msm/gpiomux-v1.h +++ /dev/null @@ -1,67 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H -#define __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H - -#if defined(CONFIG_ARCH_MSM7X30) -#define GPIOMUX_NGPIOS 182 -#elif defined(CONFIG_ARCH_QSD8X50) -#define GPIOMUX_NGPIOS 165 -#else -#define GPIOMUX_NGPIOS 133 -#endif - -typedef u32 gpiomux_config_t; - -enum { - GPIOMUX_DRV_2MA = 0UL << 17, - GPIOMUX_DRV_4MA = 1UL << 17, - GPIOMUX_DRV_6MA = 2UL << 17, - GPIOMUX_DRV_8MA = 3UL << 17, - GPIOMUX_DRV_10MA = 4UL << 17, - GPIOMUX_DRV_12MA = 5UL << 17, - GPIOMUX_DRV_14MA = 6UL << 17, - GPIOMUX_DRV_16MA = 7UL << 17, -}; - -enum { - GPIOMUX_FUNC_GPIO = 0UL, - GPIOMUX_FUNC_1 = 1UL, - GPIOMUX_FUNC_2 = 2UL, - GPIOMUX_FUNC_3 = 3UL, - GPIOMUX_FUNC_4 = 4UL, - GPIOMUX_FUNC_5 = 5UL, - GPIOMUX_FUNC_6 = 6UL, - GPIOMUX_FUNC_7 = 7UL, - GPIOMUX_FUNC_8 = 8UL, - GPIOMUX_FUNC_9 = 9UL, - GPIOMUX_FUNC_A = 10UL, - GPIOMUX_FUNC_B = 11UL, - GPIOMUX_FUNC_C = 12UL, - GPIOMUX_FUNC_D = 13UL, - GPIOMUX_FUNC_E = 14UL, - GPIOMUX_FUNC_F = 15UL, -}; - -enum { - GPIOMUX_PULL_NONE = 0UL << 15, - GPIOMUX_PULL_DOWN = 1UL << 15, - GPIOMUX_PULL_KEEPER = 2UL << 15, - GPIOMUX_PULL_UP = 3UL << 15, -}; - -#endif diff --git a/arch/arm/mach-msm/gpiomux.c b/arch/arm/mach-msm/gpiomux.c deleted file mode 100644 index 2b8e2d217082..000000000000 --- a/arch/arm/mach-msm/gpiomux.c +++ /dev/null @@ -1,111 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#include <linux/module.h> -#include <linux/spinlock.h> -#include "gpiomux.h" -#include "proc_comm.h" - -static DEFINE_SPINLOCK(gpiomux_lock); - -static void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val) -{ - unsigned tlmm_config = (val & ~GPIOMUX_CTL_MASK) | - ((gpio & 0x3ff) << 4); - unsigned tlmm_disable = 0; - int rc; - - rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, - &tlmm_config, &tlmm_disable); - if (rc) - pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n", - __func__, rc, tlmm_config, tlmm_disable); -} - -int msm_gpiomux_write(unsigned gpio, - gpiomux_config_t active, - gpiomux_config_t suspended) -{ - struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio; - unsigned long irq_flags; - gpiomux_config_t setting; - - if (gpio >= GPIOMUX_NGPIOS) - return -EINVAL; - - spin_lock_irqsave(&gpiomux_lock, irq_flags); - - if (active & GPIOMUX_VALID) - cfg->active = active; - - if (suspended & GPIOMUX_VALID) - cfg->suspended = suspended; - - setting = cfg->ref ? active : suspended; - if (setting & GPIOMUX_VALID) - __msm_gpiomux_write(gpio, setting); - - spin_unlock_irqrestore(&gpiomux_lock, irq_flags); - return 0; -} -EXPORT_SYMBOL(msm_gpiomux_write); - -int msm_gpiomux_get(unsigned gpio) -{ - struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio; - unsigned long irq_flags; - - if (gpio >= GPIOMUX_NGPIOS) - return -EINVAL; - - spin_lock_irqsave(&gpiomux_lock, irq_flags); - if (cfg->ref++ == 0 && cfg->active & GPIOMUX_VALID) - __msm_gpiomux_write(gpio, cfg->active); - spin_unlock_irqrestore(&gpiomux_lock, irq_flags); - return 0; -} -EXPORT_SYMBOL(msm_gpiomux_get); - -int msm_gpiomux_put(unsigned gpio) -{ - struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio; - unsigned long irq_flags; - - if (gpio >= GPIOMUX_NGPIOS) - return -EINVAL; - - spin_lock_irqsave(&gpiomux_lock, irq_flags); - BUG_ON(cfg->ref == 0); - if (--cfg->ref == 0 && cfg->suspended & GPIOMUX_VALID) - __msm_gpiomux_write(gpio, cfg->suspended); - spin_unlock_irqrestore(&gpiomux_lock, irq_flags); - return 0; -} -EXPORT_SYMBOL(msm_gpiomux_put); - -static int __init gpiomux_init(void) -{ - unsigned n; - - for (n = 0; n < GPIOMUX_NGPIOS; ++n) { - msm_gpiomux_configs[n].ref = 0; - if (!(msm_gpiomux_configs[n].suspended & GPIOMUX_VALID)) - continue; - __msm_gpiomux_write(n, msm_gpiomux_configs[n].suspended); - } - return 0; -} -postcore_initcall(gpiomux_init); diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h deleted file mode 100644 index 4410d7766f93..000000000000 --- a/arch/arm/mach-msm/gpiomux.h +++ /dev/null @@ -1,84 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_H -#define __ARCH_ARM_MACH_MSM_GPIOMUX_H - -#include <linux/bitops.h> -#include <linux/errno.h> -#include <mach/msm_gpiomux.h> -#include "gpiomux-v1.h" - -/** - * struct msm_gpiomux_config: gpiomux settings for one gpio line. - * - * A complete gpiomux config is the bitwise-or of a drive-strength, - * function, and pull. For functions other than GPIO, the OE - * is hard-wired according to the function. For GPIO mode, - * OE is controlled by gpiolib. - * - * Available settings differ by target; see the gpiomux header - * specific to your target arch for available configurations. - * - * @active: The configuration to be installed when the line is - * active, or its reference count is > 0. - * @suspended: The configuration to be installed when the line - * is suspended, or its reference count is 0. - * @ref: The reference count of the line. For internal use of - * the gpiomux framework only. - */ -struct msm_gpiomux_config { - gpiomux_config_t active; - gpiomux_config_t suspended; - unsigned ref; -}; - -/** - * @GPIOMUX_VALID: If set, the config field contains 'good data'. - * The absence of this bit will prevent the gpiomux - * system from applying the configuration under all - * circumstances. - */ -enum { - GPIOMUX_VALID = BIT(sizeof(gpiomux_config_t) * BITS_PER_BYTE - 1), - GPIOMUX_CTL_MASK = GPIOMUX_VALID, -}; - -#ifdef CONFIG_MSM_GPIOMUX - -/* Each architecture must provide its own instance of this table. - * To avoid having gpiomux manage any given gpio, one or both of - * the entries can avoid setting GPIOMUX_VALID - the absence - * of that flag will prevent the configuration from being applied - * during state transitions. - */ -extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS]; - -/* Install a new configuration to the gpio line. To avoid overwriting - * a configuration, leave the VALID bit out. - */ -int msm_gpiomux_write(unsigned gpio, - gpiomux_config_t active, - gpiomux_config_t suspended); -#else -static inline int msm_gpiomux_write(unsigned gpio, - gpiomux_config_t active, - gpiomux_config_t suspended) -{ - return -ENOSYS; -} -#endif -#endif diff --git a/arch/arm/mach-msm/include/mach/clk.h b/arch/arm/mach-msm/include/mach/clk.h deleted file mode 100644 index fd4f4a7a83b3..000000000000 --- a/arch/arm/mach-msm/include/mach/clk.h +++ /dev/null @@ -1,31 +0,0 @@ -/* Copyright (c) 2009, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __MACH_CLK_H -#define __MACH_CLK_H - -/* Magic rate value for use with PM QOS to request the board's maximum - * supported AXI rate. PM QOS will only pass positive s32 rate values - * through to the clock driver, so INT_MAX is used. - */ -#define MSM_AXI_MAX_FREQ LONG_MAX - -enum clk_reset_action { - CLK_RESET_DEASSERT = 0, - CLK_RESET_ASSERT = 1 -}; - -struct clk; - -/* Assert/Deassert reset to a hardware block associated with a clock */ -int clk_reset(struct clk *clk, enum clk_reset_action action); - -#endif diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h deleted file mode 100644 index a72d48d42342..000000000000 --- a/arch/arm/mach-msm/include/mach/dma.h +++ /dev/null @@ -1,151 +0,0 @@ -/* linux/include/asm-arm/arch-msm/dma.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_DMA_H - -#include <linux/list.h> - -struct msm_dmov_errdata { - uint32_t flush[6]; -}; - -struct msm_dmov_cmd { - struct list_head list; - unsigned int cmdptr; - void (*complete_func)(struct msm_dmov_cmd *cmd, - unsigned int result, - struct msm_dmov_errdata *err); - void (*execute_func)(struct msm_dmov_cmd *cmd); - void *data; -}; - -#ifndef CONFIG_ARCH_MSM8X60 -void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd); -void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful); -int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr); -#else -static inline -void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) { } -static inline -void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful) { } -static inline -int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) { return -EIO; } -#endif - -#define DMOV_CMD_LIST (0 << 29) /* does not work */ -#define DMOV_CMD_PTR_LIST (1 << 29) /* works */ -#define DMOV_CMD_INPUT_CFG (2 << 29) /* untested */ -#define DMOV_CMD_OUTPUT_CFG (3 << 29) /* untested */ -#define DMOV_CMD_ADDR(addr) ((addr) >> 3) - -#define DMOV_RSLT_VALID (1 << 31) /* 0 == host has empties result fifo */ -#define DMOV_RSLT_ERROR (1 << 3) -#define DMOV_RSLT_FLUSH (1 << 2) -#define DMOV_RSLT_DONE (1 << 1) /* top pointer done */ -#define DMOV_RSLT_USER (1 << 0) /* command with FR force result */ - -#define DMOV_STATUS_RSLT_COUNT(n) (((n) >> 29)) -#define DMOV_STATUS_CMD_COUNT(n) (((n) >> 27) & 3) -#define DMOV_STATUS_RSLT_VALID (1 << 1) -#define DMOV_STATUS_CMD_PTR_RDY (1 << 0) - -#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2) -#define DMOV_CONFIG_FORCE_FLUSH_RSLT (1 << 1) -#define DMOV_CONFIG_IRQ_EN (1 << 0) - -/* channel assignments */ - -#define DMOV_NAND_CHAN 7 -#define DMOV_NAND_CRCI_CMD 5 -#define DMOV_NAND_CRCI_DATA 4 - -#define DMOV_SDC1_CHAN 8 -#define DMOV_SDC1_CRCI 6 - -#define DMOV_SDC2_CHAN 8 -#define DMOV_SDC2_CRCI 7 - -#define DMOV_TSIF_CHAN 10 -#define DMOV_TSIF_CRCI 10 - -#define DMOV_USB_CHAN 11 - -/* no client rate control ifc (eg, ram) */ -#define DMOV_NONE_CRCI 0 - - -/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover - * is going to walk a list of 32bit pointers as described below. Each - * pointer points to a *array* of dmov_s, etc structs. The last pointer - * in the list is marked with CMD_PTR_LP. The last struct in each array - * is marked with CMD_LC (see below). - */ -#define CMD_PTR_ADDR(addr) ((addr) >> 3) -#define CMD_PTR_LP (1 << 31) /* last pointer */ -#define CMD_PTR_PT (3 << 29) /* ? */ - -/* Single Item Mode */ -typedef struct { - unsigned cmd; - unsigned src; - unsigned dst; - unsigned len; -} dmov_s; - -/* Scatter/Gather Mode */ -typedef struct { - unsigned cmd; - unsigned src_dscr; - unsigned dst_dscr; - unsigned _reserved; -} dmov_sg; - -/* Box mode */ -typedef struct { - uint32_t cmd; - uint32_t src_row_addr; - uint32_t dst_row_addr; - uint32_t src_dst_len; - uint32_t num_rows; - uint32_t row_offset; -} dmov_box; - -/* bits for the cmd field of the above structures */ - -#define CMD_LC (1 << 31) /* last command */ -#define CMD_FR (1 << 22) /* force result -- does not work? */ -#define CMD_OCU (1 << 21) /* other channel unblock */ -#define CMD_OCB (1 << 20) /* other channel block */ -#define CMD_TCB (1 << 19) /* ? */ -#define CMD_DAH (1 << 18) /* destination address hold -- does not work?*/ -#define CMD_SAH (1 << 17) /* source address hold -- does not work? */ - -#define CMD_MODE_SINGLE (0 << 0) /* dmov_s structure used */ -#define CMD_MODE_SG (1 << 0) /* untested */ -#define CMD_MODE_IND_SG (2 << 0) /* untested */ -#define CMD_MODE_BOX (3 << 0) /* untested */ - -#define CMD_DST_SWAP_BYTES (1 << 14) /* exchange each byte n with byte n+1 */ -#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */ -#define CMD_DST_SWAP_WORDS (1 << 16) /* exchange each word n with word n+1 */ - -#define CMD_SRC_SWAP_BYTES (1 << 11) /* exchange each byte n with byte n+1 */ -#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */ -#define CMD_SRC_SWAP_WORDS (1 << 13) /* exchange each word n with word n+1 */ - -#define CMD_DST_CRCI(n) (((n) & 15) << 7) -#define CMD_SRC_CRCI(n) (((n) & 15) << 3) - -#endif diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S deleted file mode 100644 index f2ae9087f654..000000000000 --- a/arch/arm/mach-msm/include/mach/entry-macro.S +++ /dev/null @@ -1,36 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - */ - -#if !defined(CONFIG_ARM_GIC) -#include <mach/msm_iomap.h> - - .macro get_irqnr_preamble, base, tmp - @ enable imprecise aborts - cpsie a - mov \base, #MSM_VIC_BASE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - @ 0xD0 has irq# or old irq# if the irq has been handled - @ 0xD4 has irq# or -1 if none pending *but* if you just - @ read 0xD4 you never get the first irq for some reason - ldr \irqnr, [\base, #0xD0] - ldr \irqnr, [\base, #0xD4] - cmp \irqnr, #0xffffffff - .endm -#endif diff --git a/arch/arm/mach-msm/include/mach/hardware.h b/arch/arm/mach-msm/include/mach/hardware.h deleted file mode 100644 index 2d126091ae41..000000000000 --- a/arch/arm/mach-msm/include/mach/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-msm/include/mach/hardware.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_HARDWARE_H - -#endif diff --git a/arch/arm/mach-msm/include/mach/irqs-7x00.h b/arch/arm/mach-msm/include/mach/irqs-7x00.h deleted file mode 100644 index f1fe70612fe9..000000000000 --- a/arch/arm/mach-msm/include/mach/irqs-7x00.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - */ - -#ifndef __ASM_ARCH_MSM_IRQS_7X00_H -#define __ASM_ARCH_MSM_IRQS_7X00_H - -/* MSM ARM11 Interrupt Numbers */ -/* See 80-VE113-1 A, pp219-221 */ - -#define INT_A9_M2A_0 0 -#define INT_A9_M2A_1 1 -#define INT_A9_M2A_2 2 -#define INT_A9_M2A_3 3 -#define INT_A9_M2A_4 4 -#define INT_A9_M2A_5 5 -#define INT_A9_M2A_6 6 -#define INT_GP_TIMER_EXP 7 -#define INT_DEBUG_TIMER_EXP 8 -#define INT_UART1 9 -#define INT_UART2 10 -#define INT_UART3 11 -#define INT_UART1_RX 12 -#define INT_UART2_RX 13 -#define INT_UART3_RX 14 -#define INT_USB_OTG 15 -#define INT_MDDI_PRI 16 -#define INT_MDDI_EXT 17 -#define INT_MDDI_CLIENT 18 -#define INT_MDP 19 -#define INT_GRAPHICS 20 -#define INT_ADM_AARM 21 -#define INT_ADSP_A11 22 -#define INT_ADSP_A9_A11 23 -#define INT_SDC1_0 24 -#define INT_SDC1_1 25 -#define INT_SDC2_0 26 -#define INT_SDC2_1 27 -#define INT_KEYSENSE 28 -#define INT_TCHSCRN_SSBI 29 -#define INT_TCHSCRN1 30 -#define INT_TCHSCRN2 31 - -#define INT_GPIO_GROUP1 (32 + 0) -#define INT_GPIO_GROUP2 (32 + 1) -#define INT_PWB_I2C (32 + 2) -#define INT_SOFTRESET (32 + 3) -#define INT_NAND_WR_ER_DONE (32 + 4) -#define INT_NAND_OP_DONE (32 + 5) -#define INT_PBUS_ARM11 (32 + 6) -#define INT_AXI_MPU_SMI (32 + 7) -#define INT_AXI_MPU_EBI1 (32 + 8) -#define INT_AD_HSSD (32 + 9) -#define INT_ARM11_PMU (32 + 10) -#define INT_ARM11_DMA (32 + 11) -#define INT_TSIF_IRQ (32 + 12) -#define INT_UART1DM_IRQ (32 + 13) -#define INT_UART1DM_RX (32 + 14) -#define INT_USB_HS (32 + 15) -#define INT_SDC3_0 (32 + 16) -#define INT_SDC3_1 (32 + 17) -#define INT_SDC4_0 (32 + 18) -#define INT_SDC4_1 (32 + 19) -#define INT_UART2DM_RX (32 + 20) -#define INT_UART2DM_IRQ (32 + 21) - -/* 22-31 are reserved */ - -#define NR_MSM_IRQS 64 -#define NR_GPIO_IRQS 122 -#define NR_BOARD_IRQS 64 - -#endif diff --git a/arch/arm/mach-msm/include/mach/irqs-7x30.h b/arch/arm/mach-msm/include/mach/irqs-7x30.h deleted file mode 100644 index 1f15902655fd..000000000000 --- a/arch/arm/mach-msm/include/mach/irqs-7x30.h +++ /dev/null @@ -1,153 +0,0 @@ -/* Copyright (c) 2009, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MSM_IRQS_7X30_H -#define __ASM_ARCH_MSM_IRQS_7X30_H - -/* MSM ACPU Interrupt Numbers */ - -#define INT_DEBUG_TIMER_EXP 0 -#define INT_GPT0_TIMER_EXP 1 -#define INT_GPT1_TIMER_EXP 2 -#define INT_WDT0_ACCSCSSBARK 3 -#define INT_WDT1_ACCSCSSBARK 4 -#define INT_AVS_SVIC 5 -#define INT_AVS_SVIC_SW_DONE 6 -#define INT_SC_DBG_RX_FULL 7 -#define INT_SC_DBG_TX_EMPTY 8 -#define INT_ARM11_PM 9 -#define INT_AVS_REQ_DOWN 10 -#define INT_AVS_REQ_UP 11 -#define INT_SC_ACG 12 -/* SCSS_VICFIQSTS0[13:15] are RESERVED */ -#define INT_L2_SVICCPUIRPTREQ 16 -#define INT_L2_SVICDMANSIRPTREQ 17 -#define INT_L2_SVICDMASIRPTREQ 18 -#define INT_L2_SVICSLVIRPTREQ 19 -#define INT_AD5A_MPROC_APPS_0 20 -#define INT_AD5A_MPROC_APPS_1 21 -#define INT_A9_M2A_0 22 -#define INT_A9_M2A_1 23 -#define INT_A9_M2A_2 24 -#define INT_A9_M2A_3 25 -#define INT_A9_M2A_4 26 -#define INT_A9_M2A_5 27 -#define INT_A9_M2A_6 28 -#define INT_A9_M2A_7 29 -#define INT_A9_M2A_8 30 -#define INT_A9_M2A_9 31 - -#define INT_AXI_EBI1_SC (32 + 0) -#define INT_IMEM_ERR (32 + 1) -#define INT_AXI_EBI0_SC (32 + 2) -#define INT_PBUS_SC_IRQC (32 + 3) -#define INT_PERPH_BUS_BPM (32 + 4) -#define INT_CC_TEMP_SENSE (32 + 5) -#define INT_UXMC_EBI0 (32 + 6) -#define INT_UXMC_EBI1 (32 + 7) -#define INT_EBI2_OP_DONE (32 + 8) -#define INT_EBI2_WR_ER_DONE (32 + 9) -#define INT_TCSR_SPSS_CE (32 + 10) -#define INT_EMDH (32 + 11) -#define INT_PMDH (32 + 12) -#define INT_MDC (32 + 13) -#define INT_MIDI_TO_SUPSS (32 + 14) -#define INT_LPA_2 (32 + 15) -#define INT_GPIO_GROUP1_SECURE (32 + 16) -#define INT_GPIO_GROUP2_SECURE (32 + 17) -#define INT_GPIO_GROUP1 (32 + 18) -#define INT_GPIO_GROUP2 (32 + 19) -#define INT_MPRPH_SOFTRESET (32 + 20) -#define INT_PWB_I2C (32 + 21) -#define INT_PWB_I2C_2 (32 + 22) -#define INT_TSSC_SAMPLE (32 + 23) -#define INT_TSSC_PENUP (32 + 24) -#define INT_TCHSCRN_SSBI (32 + 25) -#define INT_FM_RDS (32 + 26) -#define INT_KEYSENSE (32 + 27) -#define INT_USB_OTG_HS (32 + 28) -#define INT_USB_OTG_HS2 (32 + 29) -#define INT_USB_OTG_HS3 (32 + 30) -#define INT_CSI (32 + 31) - -#define INT_SPI_OUTPUT (64 + 0) -#define INT_SPI_INPUT (64 + 1) -#define INT_SPI_ERROR (64 + 2) -#define INT_UART1 (64 + 3) -#define INT_UART1_RX (64 + 4) -#define INT_UART2 (64 + 5) -#define INT_UART2_RX (64 + 6) -#define INT_UART3 (64 + 7) -#define INT_UART3_RX (64 + 8) -#define INT_UART1DM_IRQ (64 + 9) -#define INT_UART1DM_RX (64 + 10) -#define INT_UART2DM_IRQ (64 + 11) -#define INT_UART2DM_RX (64 + 12) -#define INT_TSIF (64 + 13) -#define INT_ADM_SC1 (64 + 14) -#define INT_ADM_SC2 (64 + 15) -#define INT_MDP (64 + 16) -#define INT_VPE (64 + 17) -#define INT_GRP_2D (64 + 18) -#define INT_GRP_3D (64 + 19) -#define INT_ROTATOR (64 + 20) -#define INT_MFC720 (64 + 21) -#define INT_JPEG (64 + 22) -#define INT_VFE (64 + 23) -#define INT_TV_ENC (64 + 24) -#define INT_PMIC_SSBI (64 + 25) -#define INT_MPM_1 (64 + 26) -#define INT_TCSR_SPSS_SAMPLE (64 + 27) -#define INT_TCSR_SPSS_PENUP (64 + 28) -#define INT_MPM_2 (64 + 29) -#define INT_SDC1_0 (64 + 30) -#define INT_SDC1_1 (64 + 31) - -#define INT_SDC3_0 (96 + 0) -#define INT_SDC3_1 (96 + 1) -#define INT_SDC2_0 (96 + 2) -#define INT_SDC2_1 (96 + 3) -#define INT_SDC4_0 (96 + 4) -#define INT_SDC4_1 (96 + 5) -#define INT_PWB_QUP_IN (96 + 6) -#define INT_PWB_QUP_OUT (96 + 7) -#define INT_PWB_QUP_ERR (96 + 8) -#define INT_SCSS_WDT0_BITE (96 + 9) -/* SCSS_VICFIQSTS3[10:31] are RESERVED */ - -/* Retrofit universal macro names */ -#define INT_ADM_AARM INT_ADM_SC2 -#define INT_USB_HS INT_USB_OTG_HS -#define INT_USB_OTG INT_USB_OTG_HS -#define INT_TCHSCRN1 INT_TSSC_SAMPLE -#define INT_TCHSCRN2 INT_TSSC_PENUP -#define INT_GP_TIMER_EXP INT_GPT0_TIMER_EXP -#define INT_ADSP_A11 INT_AD5A_MPROC_APPS_0 -#define INT_ADSP_A9_A11 INT_AD5A_MPROC_APPS_1 -#define INT_MDDI_EXT INT_EMDH -#define INT_MDDI_PRI INT_PMDH -#define INT_MDDI_CLIENT INT_MDC -#define INT_NAND_WR_ER_DONE INT_EBI2_WR_ER_DONE -#define INT_NAND_OP_DONE INT_EBI2_OP_DONE - -#define NR_MSM_IRQS 128 -#define NR_GPIO_IRQS 182 -#define PMIC8058_IRQ_BASE (NR_MSM_IRQS + NR_GPIO_IRQS) -#define NR_PMIC8058_GPIO_IRQS 40 -#define NR_PMIC8058_MPP_IRQS 12 -#define NR_PMIC8058_MISC_IRQS 8 -#define NR_PMIC8058_IRQS (NR_PMIC8058_GPIO_IRQS +\ - NR_PMIC8058_MPP_IRQS +\ - NR_PMIC8058_MISC_IRQS) -#define NR_BOARD_IRQS NR_PMIC8058_IRQS - -#endif /* __ASM_ARCH_MSM_IRQS_7X30_H */ diff --git a/arch/arm/mach-msm/include/mach/irqs-8x50.h b/arch/arm/mach-msm/include/mach/irqs-8x50.h deleted file mode 100644 index 26adbe0e9406..000000000000 --- a/arch/arm/mach-msm/include/mach/irqs-8x50.h +++ /dev/null @@ -1,88 +0,0 @@ -/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MSM_IRQS_8XXX_H -#define __ASM_ARCH_MSM_IRQS_8XXX_H - -/* MSM ACPU Interrupt Numbers */ - -#define INT_A9_M2A_0 0 -#define INT_A9_M2A_1 1 -#define INT_A9_M2A_2 2 -#define INT_A9_M2A_3 3 -#define INT_A9_M2A_4 4 -#define INT_A9_M2A_5 5 -#define INT_A9_M2A_6 6 -#define INT_GP_TIMER_EXP 7 -#define INT_DEBUG_TIMER_EXP 8 -#define INT_SIRC_0 9 -#define INT_SDC3_0 10 -#define INT_SDC3_1 11 -#define INT_SDC4_0 12 -#define INT_SDC4_1 13 -#define INT_AD6_EXT_VFR 14 -#define INT_USB_OTG 15 -#define INT_MDDI_PRI 16 -#define INT_MDDI_EXT 17 -#define INT_MDDI_CLIENT 18 -#define INT_MDP 19 -#define INT_GRAPHICS 20 -#define INT_ADM_AARM 21 -#define INT_ADSP_A11 22 -#define INT_ADSP_A9_A11 23 -#define INT_SDC1_0 24 -#define INT_SDC1_1 25 -#define INT_SDC2_0 26 -#define INT_SDC2_1 27 -#define INT_KEYSENSE 28 -#define INT_TCHSCRN_SSBI 29 -#define INT_TCHSCRN1 30 -#define INT_TCHSCRN2 31 - -#define INT_TCSR_MPRPH_SC1 (32 + 0) -#define INT_USB_FS2 (32 + 1) -#define INT_PWB_I2C (32 + 2) -#define INT_SOFTRESET (32 + 3) -#define INT_NAND_WR_ER_DONE (32 + 4) -#define INT_NAND_OP_DONE (32 + 5) -#define INT_TCSR_MPRPH_SC2 (32 + 6) -#define INT_OP_PEN (32 + 7) -#define INT_AD_HSSD (32 + 8) -#define INT_ARM11_PM (32 + 9) -#define INT_SDMA_NON_SECURE (32 + 10) -#define INT_TSIF_IRQ (32 + 11) -#define INT_UART1DM_IRQ (32 + 12) -#define INT_UART1DM_RX (32 + 13) -#define INT_SDMA_SECURE (32 + 14) -#define INT_SI2S_SLAVE (32 + 15) -#define INT_SC_I2CPU (32 + 16) -#define INT_SC_DBG_RDTRFULL (32 + 17) -#define INT_SC_DBG_WDTRFULL (32 + 18) -#define INT_SCPLL_CTL_DONE (32 + 19) -#define INT_UART2DM_IRQ (32 + 20) -#define INT_UART2DM_RX (32 + 21) -#define INT_VDC_MEC (32 + 22) -#define INT_VDC_DB (32 + 23) -#define INT_VDC_AXI (32 + 24) -#define INT_VFE (32 + 25) -#define INT_USB_HS (32 + 26) -#define INT_AUDIO_OUT0 (32 + 27) -#define INT_AUDIO_OUT1 (32 + 28) -#define INT_CRYPTO (32 + 29) -#define INT_AD6M_IDLE (32 + 30) -#define INT_SIRC_1 (32 + 31) - -#define NR_GPIO_IRQS 165 -#define NR_MSM_IRQS 64 -#define NR_BOARD_IRQS 64 - -#endif diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h deleted file mode 100644 index 164d355c96ea..000000000000 --- a/arch/arm/mach-msm/include/mach/irqs.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_IRQS_H -#define __ASM_ARCH_MSM_IRQS_H - -#define MSM_IRQ_BIT(irq) (1 << ((irq) & 31)) - -#if defined(CONFIG_ARCH_MSM7X30) -#include "irqs-7x30.h" -#elif defined(CONFIG_ARCH_QSD8X50) -#include "irqs-8x50.h" -#include "sirc.h" -#elif defined(CONFIG_ARCH_MSM_ARM11) -#include "irqs-7x00.h" -#else -#error "Unknown architecture specification" -#endif - -#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS) -#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n)) -#define MSM_INT_TO_REG(base, irq) (base + irq / 32) - -#endif diff --git a/arch/arm/mach-msm/include/mach/msm_gpiomux.h b/arch/arm/mach-msm/include/mach/msm_gpiomux.h deleted file mode 100644 index 0c7d3936e02f..000000000000 --- a/arch/arm/mach-msm/include/mach/msm_gpiomux.h +++ /dev/null @@ -1,38 +0,0 @@ -/* Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _LINUX_MSM_GPIOMUX_H -#define _LINUX_MSM_GPIOMUX_H - -#ifdef CONFIG_MSM_GPIOMUX - -/* Increment a gpio's reference count, possibly activating the line. */ -int __must_check msm_gpiomux_get(unsigned gpio); - -/* Decrement a gpio's reference count, possibly suspending the line. */ -int msm_gpiomux_put(unsigned gpio); - -#else - -static inline int __must_check msm_gpiomux_get(unsigned gpio) -{ - return -ENOSYS; -} - -static inline int msm_gpiomux_put(unsigned gpio) -{ - return -ENOSYS; -} - -#endif - -#endif /* _LINUX_MSM_GPIOMUX_H */ diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h deleted file mode 100644 index 67dc0e98b958..000000000000 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h +++ /dev/null @@ -1,108 +0,0 @@ -/* arch/arm/mach-msm/include/mach/msm_iomap.h - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - * The MSM peripherals are spread all over across 768MB of physical - * space, which makes just having a simple IO_ADDRESS macro to slide - * them into the right virtual location rough. Instead, we will - * provide a master phys->virt mapping for peripherals here. - * - */ - -#ifndef __ASM_ARCH_MSM_IOMAP_7X00_H -#define __ASM_ARCH_MSM_IOMAP_7X00_H - -#include <asm/sizes.h> - -/* Physical base address and size of peripherals. - * Ordered by the virtual base addresses they will be mapped at. - * - * MSM_VIC_BASE must be an value that can be loaded via a "mov" - * instruction, otherwise entry-macro.S will not compile. - * - * If you add or remove entries here, you'll want to edit the - * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your - * changes. - * - */ - -#define MSM_VIC_BASE IOMEM(0xE0000000) -#define MSM_VIC_PHYS 0xC0000000 -#define MSM_VIC_SIZE SZ_4K - -#define MSM7X00_CSR_PHYS 0xC0100000 -#define MSM7X00_CSR_SIZE SZ_4K - -#define MSM_DMOV_BASE IOMEM(0xE0002000) -#define MSM_DMOV_PHYS 0xA9700000 -#define MSM_DMOV_SIZE SZ_4K - -#define MSM7X00_GPIO1_PHYS 0xA9200000 -#define MSM7X00_GPIO1_SIZE SZ_4K - -#define MSM7X00_GPIO2_PHYS 0xA9300000 -#define MSM7X00_GPIO2_SIZE SZ_4K - -#define MSM_CLK_CTL_BASE IOMEM(0xE0005000) -#define MSM_CLK_CTL_PHYS 0xA8600000 -#define MSM_CLK_CTL_SIZE SZ_4K - -#define MSM_SHARED_RAM_BASE IOMEM(0xE0100000) -#define MSM_SHARED_RAM_PHYS 0x01F00000 -#define MSM_SHARED_RAM_SIZE SZ_1M - -#define MSM_UART1_PHYS 0xA9A00000 -#define MSM_UART1_SIZE SZ_4K - -#define MSM_UART2_PHYS 0xA9B00000 -#define MSM_UART2_SIZE SZ_4K - -#define MSM_UART3_PHYS 0xA9C00000 -#define MSM_UART3_SIZE SZ_4K - -#define MSM_SDC1_PHYS 0xA0400000 -#define MSM_SDC1_SIZE SZ_4K - -#define MSM_SDC2_PHYS 0xA0500000 -#define MSM_SDC2_SIZE SZ_4K - -#define MSM_SDC3_PHYS 0xA0600000 -#define MSM_SDC3_SIZE SZ_4K - -#define MSM_SDC4_PHYS 0xA0700000 -#define MSM_SDC4_SIZE SZ_4K - -#define MSM_I2C_PHYS 0xA9900000 -#define MSM_I2C_SIZE SZ_4K - -#define MSM_HSUSB_PHYS 0xA0800000 -#define MSM_HSUSB_SIZE SZ_4K - -#define MSM_PMDH_PHYS 0xAA600000 -#define MSM_PMDH_SIZE SZ_4K - -#define MSM_EMDH_PHYS 0xAA700000 -#define MSM_EMDH_SIZE SZ_4K - -#define MSM_MDP_PHYS 0xAA200000 -#define MSM_MDP_SIZE 0x000F0000 - -#define MSM_MDC_PHYS 0xAA500000 -#define MSM_MDC_SIZE SZ_1M - -#define MSM_AD5_PHYS 0xAC000000 -#define MSM_AD5_SIZE (SZ_1M*13) - -#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h deleted file mode 100644 index 198202c267c8..000000000000 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2011 Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - * The MSM peripherals are spread all over across 768MB of physical - * space, which makes just having a simple IO_ADDRESS macro to slide - * them into the right virtual location rough. Instead, we will - * provide a master phys->virt mapping for peripherals here. - * - */ - -#ifndef __ASM_ARCH_MSM_IOMAP_7X30_H -#define __ASM_ARCH_MSM_IOMAP_7X30_H - -/* Physical base address and size of peripherals. - * Ordered by the virtual base addresses they will be mapped at. - * - * MSM_VIC_BASE must be an value that can be loaded via a "mov" - * instruction, otherwise entry-macro.S will not compile. - * - * If you add or remove entries here, you'll want to edit the - * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your - * changes. - * - */ - -#define MSM_VIC_BASE IOMEM(0xE0000000) -#define MSM_VIC_PHYS 0xC0080000 -#define MSM_VIC_SIZE SZ_4K - -#define MSM7X30_CSR_PHYS 0xC0100000 -#define MSM7X30_CSR_SIZE SZ_4K - -#define MSM_DMOV_BASE IOMEM(0xE0002000) -#define MSM_DMOV_PHYS 0xAC400000 -#define MSM_DMOV_SIZE SZ_4K - -#define MSM7X30_GPIO1_PHYS 0xAC001000 -#define MSM7X30_GPIO1_SIZE SZ_4K - -#define MSM7X30_GPIO2_PHYS 0xAC101000 -#define MSM7X30_GPIO2_SIZE SZ_4K - -#define MSM_CLK_CTL_BASE IOMEM(0xE0005000) -#define MSM_CLK_CTL_PHYS 0xAB800000 -#define MSM_CLK_CTL_SIZE SZ_4K - -#define MSM_CLK_CTL_SH2_BASE IOMEM(0xE0006000) -#define MSM_CLK_CTL_SH2_PHYS 0xABA01000 -#define MSM_CLK_CTL_SH2_SIZE SZ_4K - -#define MSM_ACC_BASE IOMEM(0xE0007000) -#define MSM_ACC_PHYS 0xC0101000 -#define MSM_ACC_SIZE SZ_4K - -#define MSM_SAW_BASE IOMEM(0xE0008000) -#define MSM_SAW_PHYS 0xC0102000 -#define MSM_SAW_SIZE SZ_4K - -#define MSM_GCC_BASE IOMEM(0xE0009000) -#define MSM_GCC_PHYS 0xC0182000 -#define MSM_GCC_SIZE SZ_4K - -#define MSM_TCSR_BASE IOMEM(0xE000A000) -#define MSM_TCSR_PHYS 0xAB600000 -#define MSM_TCSR_SIZE SZ_4K - -#define MSM_SHARED_RAM_BASE IOMEM(0xE0100000) -#define MSM_SHARED_RAM_PHYS 0x00100000 -#define MSM_SHARED_RAM_SIZE SZ_1M - -#define MSM_UART1_PHYS 0xACA00000 -#define MSM_UART1_SIZE SZ_4K - -#define MSM_UART2_PHYS 0xACB00000 -#define MSM_UART2_SIZE SZ_4K - -#define MSM_UART3_PHYS 0xACC00000 -#define MSM_UART3_SIZE SZ_4K - -#define MSM_MDC_BASE IOMEM(0xE0200000) -#define MSM_MDC_PHYS 0xAA500000 -#define MSM_MDC_SIZE SZ_1M - -#define MSM_AD5_BASE IOMEM(0xE0300000) -#define MSM_AD5_PHYS 0xA7000000 -#define MSM_AD5_SIZE (SZ_1M*13) - -#define MSM_HSUSB_PHYS 0xA3600000 -#define MSM_HSUSB_SIZE SZ_1K - -#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h deleted file mode 100644 index 0faa894729b7..000000000000 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2011 Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - * The MSM peripherals are spread all over across 768MB of physical - * space, which makes just having a simple IO_ADDRESS macro to slide - * them into the right virtual location rough. Instead, we will - * provide a master phys->virt mapping for peripherals here. - * - */ - -#ifndef __ASM_ARCH_MSM_IOMAP_8X50_H -#define __ASM_ARCH_MSM_IOMAP_8X50_H - -/* Physical base address and size of peripherals. - * Ordered by the virtual base addresses they will be mapped at. - * - * MSM_VIC_BASE must be an value that can be loaded via a "mov" - * instruction, otherwise entry-macro.S will not compile. - * - * If you add or remove entries here, you'll want to edit the - * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your - * changes. - * - */ - -#define MSM_VIC_BASE IOMEM(0xE0000000) -#define MSM_VIC_PHYS 0xAC000000 -#define MSM_VIC_SIZE SZ_4K - -#define QSD8X50_CSR_PHYS 0xAC100000 -#define QSD8X50_CSR_SIZE SZ_4K - -#define MSM_DMOV_BASE IOMEM(0xE0002000) -#define MSM_DMOV_PHYS 0xA9700000 -#define MSM_DMOV_SIZE SZ_4K - -#define QSD8X50_GPIO1_PHYS 0xA9000000 -#define QSD8X50_GPIO1_SIZE SZ_4K - -#define QSD8X50_GPIO2_PHYS 0xA9100000 -#define QSD8X50_GPIO2_SIZE SZ_4K - -#define MSM_CLK_CTL_BASE IOMEM(0xE0005000) -#define MSM_CLK_CTL_PHYS 0xA8600000 -#define MSM_CLK_CTL_SIZE SZ_4K - -#define MSM_SIRC_BASE IOMEM(0xE1006000) -#define MSM_SIRC_PHYS 0xAC200000 -#define MSM_SIRC_SIZE SZ_4K - -#define MSM_SCPLL_BASE IOMEM(0xE1007000) -#define MSM_SCPLL_PHYS 0xA8800000 -#define MSM_SCPLL_SIZE SZ_4K - -#ifdef CONFIG_MSM_SOC_REV_A -#define MSM_SMI_BASE 0xE0000000 -#else -#define MSM_SMI_BASE 0x00000000 -#endif - -#define MSM_SHARED_RAM_BASE IOMEM(0xE0100000) -#define MSM_SHARED_RAM_PHYS (MSM_SMI_BASE + 0x00100000) -#define MSM_SHARED_RAM_SIZE SZ_1M - -#define MSM_UART1_PHYS 0xA9A00000 -#define MSM_UART1_SIZE SZ_4K - -#define MSM_UART2_PHYS 0xA9B00000 -#define MSM_UART2_SIZE SZ_4K - -#define MSM_UART3_PHYS 0xA9C00000 -#define MSM_UART3_SIZE SZ_4K - -#define MSM_MDC_BASE IOMEM(0xE0200000) -#define MSM_MDC_PHYS 0xAA500000 -#define MSM_MDC_SIZE SZ_1M - -#define MSM_AD5_BASE IOMEM(0xE0300000) -#define MSM_AD5_PHYS 0xAC000000 -#define MSM_AD5_SIZE (SZ_1M*13) - - -#define MSM_I2C_SIZE SZ_4K -#define MSM_I2C_PHYS 0xA9900000 - -#define MSM_HSUSB_PHYS 0xA0800000 -#define MSM_HSUSB_SIZE SZ_1K - -#define MSM_NAND_PHYS 0xA0A00000 - - -#define MSM_TSIF_PHYS (0xa0100000) -#define MSM_TSIF_SIZE (0x200) - -#define MSM_TSSC_PHYS 0xAA300000 - -#define MSM_UART1DM_PHYS 0xA0200000 -#define MSM_UART2DM_PHYS 0xA0900000 - - -#define MSM_SDC1_PHYS 0xA0300000 -#define MSM_SDC1_SIZE SZ_4K - -#define MSM_SDC2_PHYS 0xA0400000 -#define MSM_SDC2_SIZE SZ_4K - -#define MSM_SDC3_PHYS 0xA0500000 -#define MSM_SDC3_SIZE SZ_4K - -#define MSM_SDC4_PHYS 0xA0600000 -#define MSM_SDC4_SIZE SZ_4K - -#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h deleted file mode 100644 index 0e4f49157684..000000000000 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - * The MSM peripherals are spread all over across 768MB of physical - * space, which makes just having a simple IO_ADDRESS macro to slide - * them into the right virtual location rough. Instead, we will - * provide a master phys->virt mapping for peripherals here. - * - */ - -#ifndef __ASM_ARCH_MSM_IOMAP_H -#define __ASM_ARCH_MSM_IOMAP_H - -#include <asm/sizes.h> - -/* Physical base address and size of peripherals. - * Ordered by the virtual base addresses they will be mapped at. - * - * MSM_VIC_BASE must be an value that can be loaded via a "mov" - * instruction, otherwise entry-macro.S will not compile. - * - * If you add or remove entries here, you'll want to edit the - * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your - * changes. - * - */ - -#if defined(CONFIG_ARCH_MSM7X30) -#include "msm_iomap-7x30.h" -#elif defined(CONFIG_ARCH_QSD8X50) -#include "msm_iomap-8x50.h" -#else -#include "msm_iomap-7x00.h" -#endif - -/* Virtual addresses shared across all MSM targets. */ -#define MSM_CSR_BASE IOMEM(0xE0001000) -#define MSM_GPIO1_BASE IOMEM(0xE0003000) -#define MSM_GPIO2_BASE IOMEM(0xE0004000) - -#endif diff --git a/arch/arm/mach-msm/include/mach/msm_smd.h b/arch/arm/mach-msm/include/mach/msm_smd.h deleted file mode 100644 index 029463ec8756..000000000000 --- a/arch/arm/mach-msm/include/mach/msm_smd.h +++ /dev/null @@ -1,109 +0,0 @@ -/* linux/include/asm-arm/arch-msm/msm_smd.h - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_SMD_H -#define __ASM_ARCH_MSM_SMD_H - -typedef struct smd_channel smd_channel_t; - -extern int (*msm_check_for_modem_crash)(void); - -/* warning: notify() may be called before open returns */ -int smd_open(const char *name, smd_channel_t **ch, void *priv, - void (*notify)(void *priv, unsigned event)); - -#define SMD_EVENT_DATA 1 -#define SMD_EVENT_OPEN 2 -#define SMD_EVENT_CLOSE 3 - -int smd_close(smd_channel_t *ch); - -/* passing a null pointer for data reads and discards */ -int smd_read(smd_channel_t *ch, void *data, int len); - -/* Write to stream channels may do a partial write and return -** the length actually written. -** Write to packet channels will never do a partial write -- -** it will return the requested length written or an error. -*/ -int smd_write(smd_channel_t *ch, const void *data, int len); -int smd_write_atomic(smd_channel_t *ch, const void *data, int len); - -int smd_write_avail(smd_channel_t *ch); -int smd_read_avail(smd_channel_t *ch); - -/* Returns the total size of the current packet being read. -** Returns 0 if no packets available or a stream channel. -*/ -int smd_cur_packet_size(smd_channel_t *ch); - -/* used for tty unthrottling and the like -- causes the notify() -** callback to be called from the same lock context as is used -** when it is called from channel updates -*/ -void smd_kick(smd_channel_t *ch); - - -#if 0 -/* these are interruptable waits which will block you until the specified -** number of bytes are readable or writable. -*/ -int smd_wait_until_readable(smd_channel_t *ch, int bytes); -int smd_wait_until_writable(smd_channel_t *ch, int bytes); -#endif - -typedef enum { - SMD_PORT_DS = 0, - SMD_PORT_DIAG, - SMD_PORT_RPC_CALL, - SMD_PORT_RPC_REPLY, - SMD_PORT_BT, - SMD_PORT_CONTROL, - SMD_PORT_MEMCPY_SPARE1, - SMD_PORT_DATA1, - SMD_PORT_DATA2, - SMD_PORT_DATA3, - SMD_PORT_DATA4, - SMD_PORT_DATA5, - SMD_PORT_DATA6, - SMD_PORT_DATA7, - SMD_PORT_DATA8, - SMD_PORT_DATA9, - SMD_PORT_DATA10, - SMD_PORT_DATA11, - SMD_PORT_DATA12, - SMD_PORT_DATA13, - SMD_PORT_DATA14, - SMD_PORT_DATA15, - SMD_PORT_DATA16, - SMD_PORT_DATA17, - SMD_PORT_DATA18, - SMD_PORT_DATA19, - SMD_PORT_DATA20, - SMD_PORT_GPS_NMEA, - SMD_PORT_BRIDGE_1, - SMD_PORT_BRIDGE_2, - SMD_PORT_BRIDGE_3, - SMD_PORT_BRIDGE_4, - SMD_PORT_BRIDGE_5, - SMD_PORT_LOOPBACK, - SMD_PORT_CS_APPS_MODEM, - SMD_PORT_CS_APPS_DSP, - SMD_PORT_CS_MODEM_DSP, - SMD_NUM_PORTS, -} smd_port_id_type; - -#endif diff --git a/arch/arm/mach-msm/include/mach/sirc.h b/arch/arm/mach-msm/include/mach/sirc.h deleted file mode 100644 index ef55868a5b8a..000000000000 --- a/arch/arm/mach-msm/include/mach/sirc.h +++ /dev/null @@ -1,98 +0,0 @@ -/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MSM_SIRC_H -#define __ASM_ARCH_MSM_SIRC_H - -struct sirc_regs_t { - void *int_enable; - void *int_enable_clear; - void *int_enable_set; - void *int_type; - void *int_polarity; - void *int_clear; -}; - -struct sirc_cascade_regs { - void *int_status; - unsigned int cascade_irq; -}; - -void msm_init_sirc(void); -void msm_sirc_enter_sleep(void); -void msm_sirc_exit_sleep(void); - -#if defined(CONFIG_ARCH_MSM_SCORPION) - -#include <mach/msm_iomap.h> - -/* - * Secondary interrupt controller interrupts - */ - -#define FIRST_SIRC_IRQ (NR_MSM_IRQS + NR_GPIO_IRQS) - -#define INT_UART1 (FIRST_SIRC_IRQ + 0) -#define INT_UART2 (FIRST_SIRC_IRQ + 1) -#define INT_UART3 (FIRST_SIRC_IRQ + 2) -#define INT_UART1_RX (FIRST_SIRC_IRQ + 3) -#define INT_UART2_RX (FIRST_SIRC_IRQ + 4) -#define INT_UART3_RX (FIRST_SIRC_IRQ + 5) -#define INT_SPI_INPUT (FIRST_SIRC_IRQ + 6) -#define INT_SPI_OUTPUT (FIRST_SIRC_IRQ + 7) -#define INT_SPI_ERROR (FIRST_SIRC_IRQ + 8) -#define INT_GPIO_GROUP1 (FIRST_SIRC_IRQ + 9) -#define INT_GPIO_GROUP2 (FIRST_SIRC_IRQ + 10) -#define INT_GPIO_GROUP1_SECURE (FIRST_SIRC_IRQ + 11) -#define INT_GPIO_GROUP2_SECURE (FIRST_SIRC_IRQ + 12) -#define INT_AVS_SVIC (FIRST_SIRC_IRQ + 13) -#define INT_AVS_REQ_UP (FIRST_SIRC_IRQ + 14) -#define INT_AVS_REQ_DOWN (FIRST_SIRC_IRQ + 15) -#define INT_PBUS_ERR (FIRST_SIRC_IRQ + 16) -#define INT_AXI_ERR (FIRST_SIRC_IRQ + 17) -#define INT_SMI_ERR (FIRST_SIRC_IRQ + 18) -#define INT_EBI1_ERR (FIRST_SIRC_IRQ + 19) -#define INT_IMEM_ERR (FIRST_SIRC_IRQ + 20) -#define INT_TEMP_SENSOR (FIRST_SIRC_IRQ + 21) -#define INT_TV_ENC (FIRST_SIRC_IRQ + 22) -#define INT_GRP2D (FIRST_SIRC_IRQ + 23) -#define INT_GSBI_QUP (FIRST_SIRC_IRQ + 24) -#define INT_SC_ACG (FIRST_SIRC_IRQ + 25) -#define INT_WDT0 (FIRST_SIRC_IRQ + 26) -#define INT_WDT1 (FIRST_SIRC_IRQ + 27) - -#if defined(CONFIG_MSM_SOC_REV_A) -#define NR_SIRC_IRQS 28 -#define SIRC_MASK 0x0FFFFFFF -#else -#define NR_SIRC_IRQS 23 -#define SIRC_MASK 0x007FFFFF -#endif - -#define LAST_SIRC_IRQ (FIRST_SIRC_IRQ + NR_SIRC_IRQS - 1) - -#define SPSS_SIRC_INT_SELECT (MSM_SIRC_BASE + 0x00) -#define SPSS_SIRC_INT_ENABLE (MSM_SIRC_BASE + 0x04) -#define SPSS_SIRC_INT_ENABLE_CLEAR (MSM_SIRC_BASE + 0x08) -#define SPSS_SIRC_INT_ENABLE_SET (MSM_SIRC_BASE + 0x0C) -#define SPSS_SIRC_INT_TYPE (MSM_SIRC_BASE + 0x10) -#define SPSS_SIRC_INT_POLARITY (MSM_SIRC_BASE + 0x14) -#define SPSS_SIRC_SECURITY (MSM_SIRC_BASE + 0x18) -#define SPSS_SIRC_IRQ_STATUS (MSM_SIRC_BASE + 0x1C) -#define SPSS_SIRC_IRQ1_STATUS (MSM_SIRC_BASE + 0x20) -#define SPSS_SIRC_RAW_STATUS (MSM_SIRC_BASE + 0x24) -#define SPSS_SIRC_INT_CLEAR (MSM_SIRC_BASE + 0x28) -#define SPSS_SIRC_SOFT_INT (MSM_SIRC_BASE + 0x2C) - -#endif - -#endif diff --git a/arch/arm/mach-msm/include/mach/vreg.h b/arch/arm/mach-msm/include/mach/vreg.h deleted file mode 100644 index 6626e7864e28..000000000000 --- a/arch/arm/mach-msm/include/mach/vreg.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/include/asm-arm/arch-msm/vreg.h - * - * Copyright (C) 2008 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ARCH_ARM_MACH_MSM_VREG_H -#define __ARCH_ARM_MACH_MSM_VREG_H - -struct vreg; - -struct vreg *vreg_get(struct device *dev, const char *id); -void vreg_put(struct vreg *vreg); - -int vreg_enable(struct vreg *vreg); -int vreg_disable(struct vreg *vreg); -int vreg_set_level(struct vreg *vreg, unsigned mv); - -#endif diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c deleted file mode 100644 index b042dca1f633..000000000000 --- a/arch/arm/mach-msm/io.c +++ /dev/null @@ -1,161 +0,0 @@ -/* arch/arm/mach-msm/io.c - * - * MSM7K, QSD io support - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/bug.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/export.h> - -#include <mach/hardware.h> -#include <asm/page.h> -#include <mach/msm_iomap.h> -#include <asm/mach/map.h> - -#include "common.h" - -#define MSM_CHIP_DEVICE_TYPE(name, chip, mem_type) { \ - .virtual = (unsigned long) MSM_##name##_BASE, \ - .pfn = __phys_to_pfn(chip##_##name##_PHYS), \ - .length = chip##_##name##_SIZE, \ - .type = mem_type, \ - } - -#define MSM_DEVICE_TYPE(name, mem_type) \ - MSM_CHIP_DEVICE_TYPE(name, MSM, mem_type) -#define MSM_CHIP_DEVICE(name, chip) \ - MSM_CHIP_DEVICE_TYPE(name, chip, MT_DEVICE) -#define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM) - -#if defined(CONFIG_ARCH_MSM7X00A) -static struct map_desc msm_io_desc[] __initdata = { - MSM_DEVICE_TYPE(VIC, MT_DEVICE_NONSHARED), - MSM_CHIP_DEVICE_TYPE(CSR, MSM7X00, MT_DEVICE_NONSHARED), - MSM_DEVICE_TYPE(DMOV, MT_DEVICE_NONSHARED), - MSM_CHIP_DEVICE_TYPE(GPIO1, MSM7X00, MT_DEVICE_NONSHARED), - MSM_CHIP_DEVICE_TYPE(GPIO2, MSM7X00, MT_DEVICE_NONSHARED), - MSM_DEVICE_TYPE(CLK_CTL, MT_DEVICE_NONSHARED), - { - .virtual = (unsigned long) MSM_SHARED_RAM_BASE, - .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS), - .length = MSM_SHARED_RAM_SIZE, - .type = MT_DEVICE, - }, -#if defined(CONFIG_DEBUG_MSM_UART) - { - /* Must be last: virtual and pfn filled in by debug_ll_addr() */ - .length = SZ_4K, - .type = MT_DEVICE_NONSHARED, - } -#endif -}; - -void __init msm_map_common_io(void) -{ - size_t size = ARRAY_SIZE(msm_io_desc); - - /* Make sure the peripheral register window is closed, since - * we will use PTE flags (TEX[1]=1,B=0,C=1) to determine which - * pages are peripheral interface or not. - */ - asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0)); -#if defined(CONFIG_DEBUG_MSM_UART) -#ifdef CONFIG_MMU - debug_ll_addr(&msm_io_desc[size - 1].pfn, - &msm_io_desc[size - 1].virtual); -#endif - msm_io_desc[size - 1].pfn = __phys_to_pfn(msm_io_desc[size - 1].pfn); -#endif - iotable_init(msm_io_desc, size); -} -#endif - -#ifdef CONFIG_ARCH_QSD8X50 -static struct map_desc qsd8x50_io_desc[] __initdata = { - MSM_DEVICE(VIC), - MSM_CHIP_DEVICE(CSR, QSD8X50), - MSM_DEVICE(DMOV), - MSM_CHIP_DEVICE(GPIO1, QSD8X50), - MSM_CHIP_DEVICE(GPIO2, QSD8X50), - MSM_DEVICE(CLK_CTL), - MSM_DEVICE(SIRC), - MSM_DEVICE(SCPLL), - MSM_DEVICE(AD5), - MSM_DEVICE(MDC), - { - .virtual = (unsigned long) MSM_SHARED_RAM_BASE, - .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS), - .length = MSM_SHARED_RAM_SIZE, - .type = MT_DEVICE, - }, -}; - -void __init msm_map_qsd8x50_io(void) -{ - debug_ll_io_init(); - iotable_init(qsd8x50_io_desc, ARRAY_SIZE(qsd8x50_io_desc)); -} -#endif /* CONFIG_ARCH_QSD8X50 */ - -#ifdef CONFIG_ARCH_MSM7X30 -static struct map_desc msm7x30_io_desc[] __initdata = { - MSM_DEVICE(VIC), - MSM_CHIP_DEVICE(CSR, MSM7X30), - MSM_DEVICE(DMOV), - MSM_CHIP_DEVICE(GPIO1, MSM7X30), - MSM_CHIP_DEVICE(GPIO2, MSM7X30), - MSM_DEVICE(CLK_CTL), - MSM_DEVICE(CLK_CTL_SH2), - MSM_DEVICE(AD5), - MSM_DEVICE(MDC), - MSM_DEVICE(ACC), - MSM_DEVICE(SAW), - MSM_DEVICE(GCC), - MSM_DEVICE(TCSR), - { - .virtual = (unsigned long) MSM_SHARED_RAM_BASE, - .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS), - .length = MSM_SHARED_RAM_SIZE, - .type = MT_DEVICE, - }, -}; - -void __init msm_map_msm7x30_io(void) -{ - debug_ll_io_init(); - iotable_init(msm7x30_io_desc, ARRAY_SIZE(msm7x30_io_desc)); -} -#endif /* CONFIG_ARCH_MSM7X30 */ - -#ifdef CONFIG_ARCH_MSM7X00A -void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size, - unsigned int mtype, void *caller) -{ - if (mtype == MT_DEVICE) { - /* The peripherals in the 88000000 - D0000000 range - * are only accessible by type MT_DEVICE_NONSHARED. - * Adjust mtype as necessary to make this "just work." - */ - if ((phys_addr >= 0x88000000) && (phys_addr < 0xD0000000)) - mtype = MT_DEVICE_NONSHARED; - } - - return __arm_ioremap_caller(phys_addr, size, mtype, caller); -} -#endif diff --git a/arch/arm/mach-msm/irq-vic.c b/arch/arm/mach-msm/irq-vic.c deleted file mode 100644 index 1b54f807c2d0..000000000000 --- a/arch/arm/mach-msm/irq-vic.c +++ /dev/null @@ -1,363 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009, Code Aurora Forum. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ptrace.h> -#include <linux/timer.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <asm/cacheflush.h> - -#include <mach/hardware.h> - -#include <mach/msm_iomap.h> - -#include "smd_private.h" - -enum { - IRQ_DEBUG_SLEEP_INT_TRIGGER = 1U << 0, - IRQ_DEBUG_SLEEP_INT = 1U << 1, - IRQ_DEBUG_SLEEP_ABORT = 1U << 2, - IRQ_DEBUG_SLEEP = 1U << 3, - IRQ_DEBUG_SLEEP_REQUEST = 1U << 4, -}; -static int msm_irq_debug_mask; -module_param_named(debug_mask, msm_irq_debug_mask, int, - S_IRUGO | S_IWUSR | S_IWGRP); - -#define VIC_REG(off) (MSM_VIC_BASE + (off)) -#define VIC_INT_TO_REG_ADDR(base, irq) (base + (irq / 32) * 4) -#define VIC_INT_TO_REG_INDEX(irq) ((irq >> 5) & 3) - -#define VIC_INT_SELECT0 VIC_REG(0x0000) /* 1: FIQ, 0: IRQ */ -#define VIC_INT_SELECT1 VIC_REG(0x0004) /* 1: FIQ, 0: IRQ */ -#define VIC_INT_SELECT2 VIC_REG(0x0008) /* 1: FIQ, 0: IRQ */ -#define VIC_INT_SELECT3 VIC_REG(0x000C) /* 1: FIQ, 0: IRQ */ -#define VIC_INT_EN0 VIC_REG(0x0010) -#define VIC_INT_EN1 VIC_REG(0x0014) -#define VIC_INT_EN2 VIC_REG(0x0018) -#define VIC_INT_EN3 VIC_REG(0x001C) -#define VIC_INT_ENCLEAR0 VIC_REG(0x0020) -#define VIC_INT_ENCLEAR1 VIC_REG(0x0024) -#define VIC_INT_ENCLEAR2 VIC_REG(0x0028) -#define VIC_INT_ENCLEAR3 VIC_REG(0x002C) -#define VIC_INT_ENSET0 VIC_REG(0x0030) -#define VIC_INT_ENSET1 VIC_REG(0x0034) -#define VIC_INT_ENSET2 VIC_REG(0x0038) -#define VIC_INT_ENSET3 VIC_REG(0x003C) -#define VIC_INT_TYPE0 VIC_REG(0x0040) /* 1: EDGE, 0: LEVEL */ -#define VIC_INT_TYPE1 VIC_REG(0x0044) /* 1: EDGE, 0: LEVEL */ -#define VIC_INT_TYPE2 VIC_REG(0x0048) /* 1: EDGE, 0: LEVEL */ -#define VIC_INT_TYPE3 VIC_REG(0x004C) /* 1: EDGE, 0: LEVEL */ -#define VIC_INT_POLARITY0 VIC_REG(0x0050) /* 1: NEG, 0: POS */ -#define VIC_INT_POLARITY1 VIC_REG(0x0054) /* 1: NEG, 0: POS */ -#define VIC_INT_POLARITY2 VIC_REG(0x0058) /* 1: NEG, 0: POS */ -#define VIC_INT_POLARITY3 VIC_REG(0x005C) /* 1: NEG, 0: POS */ -#define VIC_NO_PEND_VAL VIC_REG(0x0060) - -#if defined(CONFIG_ARCH_MSM_SCORPION) -#define VIC_NO_PEND_VAL_FIQ VIC_REG(0x0064) -#define VIC_INT_MASTEREN VIC_REG(0x0068) /* 1: IRQ, 2: FIQ */ -#define VIC_CONFIG VIC_REG(0x006C) /* 1: USE SC VIC */ -#else -#define VIC_INT_MASTEREN VIC_REG(0x0064) /* 1: IRQ, 2: FIQ */ -#define VIC_PROTECTION VIC_REG(0x006C) /* 1: ENABLE */ -#define VIC_CONFIG VIC_REG(0x0068) /* 1: USE ARM1136 VIC */ -#endif - -#define VIC_IRQ_STATUS0 VIC_REG(0x0080) -#define VIC_IRQ_STATUS1 VIC_REG(0x0084) -#define VIC_IRQ_STATUS2 VIC_REG(0x0088) -#define VIC_IRQ_STATUS3 VIC_REG(0x008C) -#define VIC_FIQ_STATUS0 VIC_REG(0x0090) -#define VIC_FIQ_STATUS1 VIC_REG(0x0094) -#define VIC_FIQ_STATUS2 VIC_REG(0x0098) -#define VIC_FIQ_STATUS3 VIC_REG(0x009C) -#define VIC_RAW_STATUS0 VIC_REG(0x00A0) -#define VIC_RAW_STATUS1 VIC_REG(0x00A4) -#define VIC_RAW_STATUS2 VIC_REG(0x00A8) -#define VIC_RAW_STATUS3 VIC_REG(0x00AC) -#define VIC_INT_CLEAR0 VIC_REG(0x00B0) -#define VIC_INT_CLEAR1 VIC_REG(0x00B4) -#define VIC_INT_CLEAR2 VIC_REG(0x00B8) -#define VIC_INT_CLEAR3 VIC_REG(0x00BC) -#define VIC_SOFTINT0 VIC_REG(0x00C0) -#define VIC_SOFTINT1 VIC_REG(0x00C4) -#define VIC_SOFTINT2 VIC_REG(0x00C8) -#define VIC_SOFTINT3 VIC_REG(0x00CC) -#define VIC_IRQ_VEC_RD VIC_REG(0x00D0) /* pending int # */ -#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4) /* pending vector addr */ -#define VIC_IRQ_VEC_WR VIC_REG(0x00D8) - -#if defined(CONFIG_ARCH_MSM_SCORPION) -#define VIC_FIQ_VEC_RD VIC_REG(0x00DC) -#define VIC_FIQ_VEC_PEND_RD VIC_REG(0x00E0) -#define VIC_FIQ_VEC_WR VIC_REG(0x00E4) -#define VIC_IRQ_IN_SERVICE VIC_REG(0x00E8) -#define VIC_IRQ_IN_STACK VIC_REG(0x00EC) -#define VIC_FIQ_IN_SERVICE VIC_REG(0x00F0) -#define VIC_FIQ_IN_STACK VIC_REG(0x00F4) -#define VIC_TEST_BUS_SEL VIC_REG(0x00F8) -#define VIC_IRQ_CTRL_CONFIG VIC_REG(0x00FC) -#else -#define VIC_IRQ_IN_SERVICE VIC_REG(0x00E0) -#define VIC_IRQ_IN_STACK VIC_REG(0x00E4) -#define VIC_TEST_BUS_SEL VIC_REG(0x00E8) -#endif - -#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4)) -#define VIC_VECTADDR(n) VIC_REG(0x0400+((n) * 4)) - -#if defined(CONFIG_ARCH_MSM7X30) -#define VIC_NUM_REGS 4 -#else -#define VIC_NUM_REGS 2 -#endif - -#if VIC_NUM_REGS == 2 -#define DPRINT_REGS(base_reg, format, ...) \ - printk(KERN_INFO format " %x %x\n", ##__VA_ARGS__, \ - readl(base_reg ## 0), readl(base_reg ## 1)) -#define DPRINT_ARRAY(array, format, ...) \ - printk(KERN_INFO format " %x %x\n", ##__VA_ARGS__, \ - array[0], array[1]) -#elif VIC_NUM_REGS == 4 -#define DPRINT_REGS(base_reg, format, ...) \ - printk(KERN_INFO format " %x %x %x %x\n", ##__VA_ARGS__, \ - readl(base_reg ## 0), readl(base_reg ## 1), \ - readl(base_reg ## 2), readl(base_reg ## 3)) -#define DPRINT_ARRAY(array, format, ...) \ - printk(KERN_INFO format " %x %x %x %x\n", ##__VA_ARGS__, \ - array[0], array[1], \ - array[2], array[3]) -#else -#error "VIC_NUM_REGS set to illegal value" -#endif - -static uint32_t msm_irq_smsm_wake_enable[2]; -static struct { - uint32_t int_en[2]; - uint32_t int_type; - uint32_t int_polarity; - uint32_t int_select; -} msm_irq_shadow_reg[VIC_NUM_REGS]; -static uint32_t msm_irq_idle_disable[VIC_NUM_REGS]; - -#define SMSM_FAKE_IRQ (0xff) -static uint8_t msm_irq_to_smsm[NR_IRQS] = { - [INT_MDDI_EXT] = 1, - [INT_MDDI_PRI] = 2, - [INT_MDDI_CLIENT] = 3, - [INT_USB_OTG] = 4, - - [INT_PWB_I2C] = 5, - [INT_SDC1_0] = 6, - [INT_SDC1_1] = 7, - [INT_SDC2_0] = 8, - - [INT_SDC2_1] = 9, - [INT_ADSP_A9_A11] = 10, - [INT_UART1] = 11, - [INT_UART2] = 12, - - [INT_UART3] = 13, - [INT_UART1_RX] = 14, - [INT_UART2_RX] = 15, - [INT_UART3_RX] = 16, - - [INT_UART1DM_IRQ] = 17, - [INT_UART1DM_RX] = 18, - [INT_KEYSENSE] = 19, -#if !defined(CONFIG_ARCH_MSM7X30) - [INT_AD_HSSD] = 20, -#endif - - [INT_NAND_WR_ER_DONE] = 21, - [INT_NAND_OP_DONE] = 22, - [INT_TCHSCRN1] = 23, - [INT_TCHSCRN2] = 24, - - [INT_TCHSCRN_SSBI] = 25, - [INT_USB_HS] = 26, - [INT_UART2DM_RX] = 27, - [INT_UART2DM_IRQ] = 28, - - [INT_SDC4_1] = 29, - [INT_SDC4_0] = 30, - [INT_SDC3_1] = 31, - [INT_SDC3_0] = 32, - - /* fake wakeup interrupts */ - [INT_GPIO_GROUP1] = SMSM_FAKE_IRQ, - [INT_GPIO_GROUP2] = SMSM_FAKE_IRQ, - [INT_A9_M2A_0] = SMSM_FAKE_IRQ, - [INT_A9_M2A_1] = SMSM_FAKE_IRQ, - [INT_A9_M2A_5] = SMSM_FAKE_IRQ, - [INT_GP_TIMER_EXP] = SMSM_FAKE_IRQ, - [INT_DEBUG_TIMER_EXP] = SMSM_FAKE_IRQ, - [INT_ADSP_A11] = SMSM_FAKE_IRQ, -#ifdef CONFIG_ARCH_QSD8X50 - [INT_SIRC_0] = SMSM_FAKE_IRQ, - [INT_SIRC_1] = SMSM_FAKE_IRQ, -#endif -}; - -static inline void msm_irq_write_all_regs(void __iomem *base, unsigned int val) -{ - int i; - - for (i = 0; i < VIC_NUM_REGS; i++) - writel(val, base + (i * 4)); -} - -static void msm_irq_ack(struct irq_data *d) -{ - void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_CLEAR0, d->irq); - writel(1 << (d->irq & 31), reg); -} - -static void msm_irq_mask(struct irq_data *d) -{ - void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_ENCLEAR0, d->irq); - unsigned index = VIC_INT_TO_REG_INDEX(d->irq); - uint32_t mask = 1UL << (d->irq & 31); - int smsm_irq = msm_irq_to_smsm[d->irq]; - - msm_irq_shadow_reg[index].int_en[0] &= ~mask; - writel(mask, reg); - if (smsm_irq == 0) - msm_irq_idle_disable[index] &= ~mask; - else { - mask = 1UL << (smsm_irq - 1); - msm_irq_smsm_wake_enable[0] &= ~mask; - } -} - -static void msm_irq_unmask(struct irq_data *d) -{ - void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_ENSET0, d->irq); - unsigned index = VIC_INT_TO_REG_INDEX(d->irq); - uint32_t mask = 1UL << (d->irq & 31); - int smsm_irq = msm_irq_to_smsm[d->irq]; - - msm_irq_shadow_reg[index].int_en[0] |= mask; - writel(mask, reg); - - if (smsm_irq == 0) - msm_irq_idle_disable[index] |= mask; - else { - mask = 1UL << (smsm_irq - 1); - msm_irq_smsm_wake_enable[0] |= mask; - } -} - -static int msm_irq_set_wake(struct irq_data *d, unsigned int on) -{ - unsigned index = VIC_INT_TO_REG_INDEX(d->irq); - uint32_t mask = 1UL << (d->irq & 31); - int smsm_irq = msm_irq_to_smsm[d->irq]; - - if (smsm_irq == 0) { - printk(KERN_ERR "msm_irq_set_wake: bad wakeup irq %d\n", d->irq); - return -EINVAL; - } - if (on) - msm_irq_shadow_reg[index].int_en[1] |= mask; - else - msm_irq_shadow_reg[index].int_en[1] &= ~mask; - - if (smsm_irq == SMSM_FAKE_IRQ) - return 0; - - mask = 1UL << (smsm_irq - 1); - if (on) - msm_irq_smsm_wake_enable[1] |= mask; - else - msm_irq_smsm_wake_enable[1] &= ~mask; - return 0; -} - -static int msm_irq_set_type(struct irq_data *d, unsigned int flow_type) -{ - void __iomem *treg = VIC_INT_TO_REG_ADDR(VIC_INT_TYPE0, d->irq); - void __iomem *preg = VIC_INT_TO_REG_ADDR(VIC_INT_POLARITY0, d->irq); - unsigned index = VIC_INT_TO_REG_INDEX(d->irq); - int b = 1 << (d->irq & 31); - uint32_t polarity; - uint32_t type; - - polarity = msm_irq_shadow_reg[index].int_polarity; - if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW)) - polarity |= b; - if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH)) - polarity &= ~b; - writel(polarity, preg); - msm_irq_shadow_reg[index].int_polarity = polarity; - - type = msm_irq_shadow_reg[index].int_type; - if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { - type |= b; - __irq_set_handler_locked(d->irq, handle_edge_irq); - } - if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) { - type &= ~b; - __irq_set_handler_locked(d->irq, handle_level_irq); - } - writel(type, treg); - msm_irq_shadow_reg[index].int_type = type; - return 0; -} - -static struct irq_chip msm_irq_chip = { - .name = "msm", - .irq_disable = msm_irq_mask, - .irq_ack = msm_irq_ack, - .irq_mask = msm_irq_mask, - .irq_unmask = msm_irq_unmask, - .irq_set_wake = msm_irq_set_wake, - .irq_set_type = msm_irq_set_type, -}; - -void __init msm_init_irq(void) -{ - unsigned n; - - /* select level interrupts */ - msm_irq_write_all_regs(VIC_INT_TYPE0, 0); - - /* select highlevel interrupts */ - msm_irq_write_all_regs(VIC_INT_POLARITY0, 0); - - /* select IRQ for all INTs */ - msm_irq_write_all_regs(VIC_INT_SELECT0, 0); - - /* disable all INTs */ - msm_irq_write_all_regs(VIC_INT_EN0, 0); - - /* don't use vic */ - writel(0, VIC_CONFIG); - - /* enable interrupt controller */ - writel(3, VIC_INT_MASTEREN); - - for (n = 0; n < NR_MSM_IRQS; n++) { - irq_set_chip_and_handler(n, &msm_irq_chip, handle_level_irq); - set_irq_flags(n, IRQF_VALID); - } -} diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c deleted file mode 100644 index ea514be390c6..000000000000 --- a/arch/arm/mach-msm/irq.c +++ /dev/null @@ -1,151 +0,0 @@ -/* linux/arch/arm/mach-msm/irq.c - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ptrace.h> -#include <linux/timer.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <mach/hardware.h> - -#include <mach/msm_iomap.h> - -#define VIC_REG(off) (MSM_VIC_BASE + (off)) - -#define VIC_INT_SELECT0 VIC_REG(0x0000) /* 1: FIQ, 0: IRQ */ -#define VIC_INT_SELECT1 VIC_REG(0x0004) /* 1: FIQ, 0: IRQ */ -#define VIC_INT_EN0 VIC_REG(0x0010) -#define VIC_INT_EN1 VIC_REG(0x0014) -#define VIC_INT_ENCLEAR0 VIC_REG(0x0020) -#define VIC_INT_ENCLEAR1 VIC_REG(0x0024) -#define VIC_INT_ENSET0 VIC_REG(0x0030) -#define VIC_INT_ENSET1 VIC_REG(0x0034) -#define VIC_INT_TYPE0 VIC_REG(0x0040) /* 1: EDGE, 0: LEVEL */ -#define VIC_INT_TYPE1 VIC_REG(0x0044) /* 1: EDGE, 0: LEVEL */ -#define VIC_INT_POLARITY0 VIC_REG(0x0050) /* 1: NEG, 0: POS */ -#define VIC_INT_POLARITY1 VIC_REG(0x0054) /* 1: NEG, 0: POS */ -#define VIC_NO_PEND_VAL VIC_REG(0x0060) -#define VIC_INT_MASTEREN VIC_REG(0x0064) /* 1: IRQ, 2: FIQ */ -#define VIC_PROTECTION VIC_REG(0x006C) /* 1: ENABLE */ -#define VIC_CONFIG VIC_REG(0x0068) /* 1: USE ARM1136 VIC */ -#define VIC_IRQ_STATUS0 VIC_REG(0x0080) -#define VIC_IRQ_STATUS1 VIC_REG(0x0084) -#define VIC_FIQ_STATUS0 VIC_REG(0x0090) -#define VIC_FIQ_STATUS1 VIC_REG(0x0094) -#define VIC_RAW_STATUS0 VIC_REG(0x00A0) -#define VIC_RAW_STATUS1 VIC_REG(0x00A4) -#define VIC_INT_CLEAR0 VIC_REG(0x00B0) -#define VIC_INT_CLEAR1 VIC_REG(0x00B4) -#define VIC_SOFTINT0 VIC_REG(0x00C0) -#define VIC_SOFTINT1 VIC_REG(0x00C4) -#define VIC_IRQ_VEC_RD VIC_REG(0x00D0) /* pending int # */ -#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4) /* pending vector addr */ -#define VIC_IRQ_VEC_WR VIC_REG(0x00D8) -#define VIC_IRQ_IN_SERVICE VIC_REG(0x00E0) -#define VIC_IRQ_IN_STACK VIC_REG(0x00E4) -#define VIC_TEST_BUS_SEL VIC_REG(0x00E8) - -#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4)) -#define VIC_VECTADDR(n) VIC_REG(0x0400+((n) * 4)) - -static void msm_irq_ack(struct irq_data *d) -{ - void __iomem *reg = VIC_INT_CLEAR0 + ((d->irq & 32) ? 4 : 0); - writel(1 << (d->irq & 31), reg); -} - -static void msm_irq_mask(struct irq_data *d) -{ - void __iomem *reg = VIC_INT_ENCLEAR0 + ((d->irq & 32) ? 4 : 0); - writel(1 << (d->irq & 31), reg); -} - -static void msm_irq_unmask(struct irq_data *d) -{ - void __iomem *reg = VIC_INT_ENSET0 + ((d->irq & 32) ? 4 : 0); - writel(1 << (d->irq & 31), reg); -} - -static int msm_irq_set_wake(struct irq_data *d, unsigned int on) -{ - return -EINVAL; -} - -static int msm_irq_set_type(struct irq_data *d, unsigned int flow_type) -{ - void __iomem *treg = VIC_INT_TYPE0 + ((d->irq & 32) ? 4 : 0); - void __iomem *preg = VIC_INT_POLARITY0 + ((d->irq & 32) ? 4 : 0); - int b = 1 << (d->irq & 31); - - if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW)) - writel(readl(preg) | b, preg); - if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH)) - writel(readl(preg) & (~b), preg); - - if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { - writel(readl(treg) | b, treg); - __irq_set_handler_locked(d->irq, handle_edge_irq); - } - if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) { - writel(readl(treg) & (~b), treg); - __irq_set_handler_locked(d->irq, handle_level_irq); - } - return 0; -} - -static struct irq_chip msm_irq_chip = { - .name = "msm", - .irq_ack = msm_irq_ack, - .irq_mask = msm_irq_mask, - .irq_unmask = msm_irq_unmask, - .irq_set_wake = msm_irq_set_wake, - .irq_set_type = msm_irq_set_type, -}; - -void __init msm_init_irq(void) -{ - unsigned n; - - /* select level interrupts */ - writel(0, VIC_INT_TYPE0); - writel(0, VIC_INT_TYPE1); - - /* select highlevel interrupts */ - writel(0, VIC_INT_POLARITY0); - writel(0, VIC_INT_POLARITY1); - - /* select IRQ for all INTs */ - writel(0, VIC_INT_SELECT0); - writel(0, VIC_INT_SELECT1); - - /* disable all INTs */ - writel(0, VIC_INT_EN0); - writel(0, VIC_INT_EN1); - - /* don't use 1136 vic */ - writel(0, VIC_CONFIG); - - /* enable interrupt controller */ - writel(1, VIC_INT_MASTEREN); - - for (n = 0; n < NR_MSM_IRQS; n++) { - irq_set_chip_and_handler(n, &msm_irq_chip, handle_level_irq); - set_irq_flags(n, IRQF_VALID); - } -} diff --git a/arch/arm/mach-msm/last_radio_log.c b/arch/arm/mach-msm/last_radio_log.c deleted file mode 100644 index 9c392a29fc7e..000000000000 --- a/arch/arm/mach-msm/last_radio_log.c +++ /dev/null @@ -1,71 +0,0 @@ -/* arch/arm/mach-msm/last_radio_log.c - * - * Extract the log from a modem crash though SMEM - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/fs.h> -#include <linux/proc_fs.h> -#include <linux/uaccess.h> - -#include "smd_private.h" - -static void *radio_log_base; -static size_t radio_log_size; - -extern void *smem_item(unsigned id, unsigned *size); - -static ssize_t last_radio_log_read(struct file *file, char __user *buf, - size_t len, loff_t *offset) -{ - return simple_read_from_buffer(buf, len, offset, - radio_log_base, radio_log_size); -} - -static struct file_operations last_radio_log_fops = { - .read = last_radio_log_read, - .llseek = default_llseek, -}; - -void msm_init_last_radio_log(struct module *owner) -{ - struct proc_dir_entry *entry; - - if (last_radio_log_fops.owner) { - pr_err("%s: already claimed\n", __func__); - return; - } - - radio_log_base = smem_item(SMEM_CLKREGIM_BSP, &radio_log_size); - if (!radio_log_base) { - pr_err("%s: could not retrieve SMEM_CLKREGIM_BSP\n", __func__); - return; - } - - entry = proc_create("last_radio_log", S_IRUGO, NULL, - &last_radio_log_fops); - if (!entry) { - pr_err("%s: could not create proc entry for radio log\n", - __func__); - return; - } - - pr_err("%s: last radio log is %d bytes long\n", __func__, - radio_log_size); - last_radio_log_fops.owner = owner; - proc_set_size(entry, radio_log_size); -} -EXPORT_SYMBOL(msm_init_last_radio_log); diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c deleted file mode 100644 index 507f5ca80697..000000000000 --- a/arch/arm/mach-msm/proc_comm.c +++ /dev/null @@ -1,129 +0,0 @@ -/* arch/arm/mach-msm/proc_comm.c - * - * Copyright (C) 2007-2008 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/spinlock.h> -#include <mach/msm_iomap.h> - -#include "proc_comm.h" - -static inline void msm_a2m_int(uint32_t irq) -{ -#if defined(CONFIG_ARCH_MSM7X30) - writel(1 << irq, MSM_GCC_BASE + 0x8); -#else - writel(1, MSM_CSR_BASE + 0x400 + (irq * 4)); -#endif -} - -static inline void notify_other_proc_comm(void) -{ - msm_a2m_int(6); -} - -#define APP_COMMAND 0x00 -#define APP_STATUS 0x04 -#define APP_DATA1 0x08 -#define APP_DATA2 0x0C - -#define MDM_COMMAND 0x10 -#define MDM_STATUS 0x14 -#define MDM_DATA1 0x18 -#define MDM_DATA2 0x1C - -static DEFINE_SPINLOCK(proc_comm_lock); - -/* The higher level SMD support will install this to - * provide a way to check for and handle modem restart. - */ -int (*msm_check_for_modem_crash)(void); - -/* Poll for a state change, checking for possible - * modem crashes along the way (so we don't wait - * forever while the ARM9 is blowing up). - * - * Return an error in the event of a modem crash and - * restart so the msm_proc_comm() routine can restart - * the operation from the beginning. - */ -static int proc_comm_wait_for(void __iomem *addr, unsigned value) -{ - for (;;) { - if (readl(addr) == value) - return 0; - - if (msm_check_for_modem_crash) - if (msm_check_for_modem_crash()) - return -EAGAIN; - } -} - -int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2) -{ - void __iomem *base = MSM_SHARED_RAM_BASE; - unsigned long flags; - int ret; - - spin_lock_irqsave(&proc_comm_lock, flags); - - for (;;) { - if (proc_comm_wait_for(base + MDM_STATUS, PCOM_READY)) - continue; - - writel(cmd, base + APP_COMMAND); - writel(data1 ? *data1 : 0, base + APP_DATA1); - writel(data2 ? *data2 : 0, base + APP_DATA2); - - notify_other_proc_comm(); - - if (proc_comm_wait_for(base + APP_COMMAND, PCOM_CMD_DONE)) - continue; - - if (readl(base + APP_STATUS) != PCOM_CMD_FAIL) { - if (data1) - *data1 = readl(base + APP_DATA1); - if (data2) - *data2 = readl(base + APP_DATA2); - ret = 0; - } else { - ret = -EIO; - } - break; - } - - writel(PCOM_CMD_IDLE, base + APP_COMMAND); - - spin_unlock_irqrestore(&proc_comm_lock, flags); - - return ret; -} - -/* - * We need to wait for the ARM9 to at least partially boot - * up before we can continue. Since the ARM9 does resource - * allocation, if we dont' wait we could end up crashing or in - * and unknown state. This function should be called early to - * wait on the ARM9. - */ -void proc_comm_boot_wait(void) -{ - void __iomem *base = MSM_SHARED_RAM_BASE; - - proc_comm_wait_for(base + MDM_STATUS, PCOM_READY); - -} diff --git a/arch/arm/mach-msm/proc_comm.h b/arch/arm/mach-msm/proc_comm.h deleted file mode 100644 index e8d043a0e990..000000000000 --- a/arch/arm/mach-msm/proc_comm.h +++ /dev/null @@ -1,258 +0,0 @@ -/* arch/arm/mach-msm/proc_comm.h - * - * Copyright (c) 2007 QUALCOMM Incorporated - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef _ARCH_ARM_MACH_MSM_PROC_COMM_H_ -#define _ARCH_ARM_MACH_MSM_PROC_COMM_H_ - -#include <linux/init.h> - -enum { - PCOM_CMD_IDLE = 0x0, - PCOM_CMD_DONE, - PCOM_RESET_APPS, - PCOM_RESET_CHIP, - PCOM_CONFIG_NAND_MPU, - PCOM_CONFIG_USB_CLKS, - PCOM_GET_POWER_ON_STATUS, - PCOM_GET_WAKE_UP_STATUS, - PCOM_GET_BATT_LEVEL, - PCOM_CHG_IS_CHARGING, - PCOM_POWER_DOWN, - PCOM_USB_PIN_CONFIG, - PCOM_USB_PIN_SEL, - PCOM_SET_RTC_ALARM, - PCOM_NV_READ, - PCOM_NV_WRITE, - PCOM_GET_UUID_HIGH, - PCOM_GET_UUID_LOW, - PCOM_GET_HW_ENTROPY, - PCOM_RPC_GPIO_TLMM_CONFIG_REMOTE, - PCOM_CLKCTL_RPC_ENABLE, - PCOM_CLKCTL_RPC_DISABLE, - PCOM_CLKCTL_RPC_RESET, - PCOM_CLKCTL_RPC_SET_FLAGS, - PCOM_CLKCTL_RPC_SET_RATE, - PCOM_CLKCTL_RPC_MIN_RATE, - PCOM_CLKCTL_RPC_MAX_RATE, - PCOM_CLKCTL_RPC_RATE, - PCOM_CLKCTL_RPC_PLL_REQUEST, - PCOM_CLKCTL_RPC_ENABLED, - PCOM_VREG_SWITCH, - PCOM_VREG_SET_LEVEL, - PCOM_GPIO_TLMM_CONFIG_GROUP, - PCOM_GPIO_TLMM_UNCONFIG_GROUP, - PCOM_NV_WRITE_BYTES_4_7, - PCOM_CONFIG_DISP, - PCOM_GET_FTM_BOOT_COUNT, - PCOM_RPC_GPIO_TLMM_CONFIG_EX, - PCOM_PM_MPP_CONFIG, - PCOM_GPIO_IN, - PCOM_GPIO_OUT, - PCOM_RESET_MODEM, - PCOM_RESET_CHIP_IMM, - PCOM_PM_VID_EN, - PCOM_VREG_PULLDOWN, - PCOM_GET_MODEM_VERSION, - PCOM_CLK_REGIME_SEC_RESET, - PCOM_CLK_REGIME_SEC_RESET_ASSERT, - PCOM_CLK_REGIME_SEC_RESET_DEASSERT, - PCOM_CLK_REGIME_SEC_PLL_REQUEST_WRP, - PCOM_CLK_REGIME_SEC_ENABLE, - PCOM_CLK_REGIME_SEC_DISABLE, - PCOM_CLK_REGIME_SEC_IS_ON, - PCOM_CLK_REGIME_SEC_SEL_CLK_INV, - PCOM_CLK_REGIME_SEC_SEL_CLK_SRC, - PCOM_CLK_REGIME_SEC_SEL_CLK_DIV, - PCOM_CLK_REGIME_SEC_ICODEC_CLK_ENABLE, - PCOM_CLK_REGIME_SEC_ICODEC_CLK_DISABLE, - PCOM_CLK_REGIME_SEC_SEL_SPEED, - PCOM_CLK_REGIME_SEC_CONFIG_GP_CLK_WRP, - PCOM_CLK_REGIME_SEC_CONFIG_MDH_CLK_WRP, - PCOM_CLK_REGIME_SEC_USB_XTAL_ON, - PCOM_CLK_REGIME_SEC_USB_XTAL_OFF, - PCOM_CLK_REGIME_SEC_SET_QDSP_DME_MODE, - PCOM_CLK_REGIME_SEC_SWITCH_ADSP_CLK, - PCOM_CLK_REGIME_SEC_GET_MAX_ADSP_CLK_KHZ, - PCOM_CLK_REGIME_SEC_GET_I2C_CLK_KHZ, - PCOM_CLK_REGIME_SEC_MSM_GET_CLK_FREQ_KHZ, - PCOM_CLK_REGIME_SEC_SEL_VFE_SRC, - PCOM_CLK_REGIME_SEC_MSM_SEL_CAMCLK, - PCOM_CLK_REGIME_SEC_MSM_SEL_LCDCLK, - PCOM_CLK_REGIME_SEC_VFE_RAIL_OFF, - PCOM_CLK_REGIME_SEC_VFE_RAIL_ON, - PCOM_CLK_REGIME_SEC_GRP_RAIL_OFF, - PCOM_CLK_REGIME_SEC_GRP_RAIL_ON, - PCOM_CLK_REGIME_SEC_VDC_RAIL_OFF, - PCOM_CLK_REGIME_SEC_VDC_RAIL_ON, - PCOM_CLK_REGIME_SEC_LCD_CTRL, - PCOM_CLK_REGIME_SEC_REGISTER_FOR_CPU_RESOURCE, - PCOM_CLK_REGIME_SEC_DEREGISTER_FOR_CPU_RESOURCE, - PCOM_CLK_REGIME_SEC_RESOURCE_REQUEST_WRP, - PCOM_CLK_REGIME_MSM_SEC_SEL_CLK_OWNER, - PCOM_CLK_REGIME_SEC_DEVMAN_REQUEST_WRP, - PCOM_GPIO_CONFIG, - PCOM_GPIO_CONFIGURE_GROUP, - PCOM_GPIO_TLMM_SET_PORT, - PCOM_GPIO_TLMM_CONFIG_EX, - PCOM_SET_FTM_BOOT_COUNT, - PCOM_RESERVED0, - PCOM_RESERVED1, - PCOM_CUSTOMER_CMD1, - PCOM_CUSTOMER_CMD2, - PCOM_CUSTOMER_CMD3, - PCOM_CLK_REGIME_ENTER_APPSBL_CHG_MODE, - PCOM_CLK_REGIME_EXIT_APPSBL_CHG_MODE, - PCOM_CLK_REGIME_SEC_RAIL_DISABLE, - PCOM_CLK_REGIME_SEC_RAIL_ENABLE, - PCOM_CLK_REGIME_SEC_RAIL_CONTROL, - PCOM_SET_SW_WATCHDOG_STATE, - PCOM_PM_MPP_CONFIG_DIGITAL_INPUT, - PCOM_PM_MPP_CONFIG_I_SINK, - PCOM_RESERVED_101, - PCOM_MSM_HSUSB_PHY_RESET, - PCOM_GET_BATT_MV_LEVEL, - PCOM_CHG_USB_IS_PC_CONNECTED, - PCOM_CHG_USB_IS_CHARGER_CONNECTED, - PCOM_CHG_USB_IS_DISCONNECTED, - PCOM_CHG_USB_IS_AVAILABLE, - PCOM_CLK_REGIME_SEC_MSM_SEL_FREQ, - PCOM_CLK_REGIME_SEC_SET_PCLK_AXI_POLICY, - PCOM_CLKCTL_RPC_RESET_ASSERT, - PCOM_CLKCTL_RPC_RESET_DEASSERT, - PCOM_CLKCTL_RPC_RAIL_ON, - PCOM_CLKCTL_RPC_RAIL_OFF, - PCOM_CLKCTL_RPC_RAIL_ENABLE, - PCOM_CLKCTL_RPC_RAIL_DISABLE, - PCOM_CLKCTL_RPC_RAIL_CONTROL, - PCOM_CLKCTL_RPC_MIN_MSMC1, - PCOM_NUM_CMDS, -}; - -enum { - PCOM_INVALID_STATUS = 0x0, - PCOM_READY, - PCOM_CMD_RUNNING, - PCOM_CMD_SUCCESS, - PCOM_CMD_FAIL, - PCOM_CMD_FAIL_FALSE_RETURNED, - PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_SERVER, - PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_CLIENT, - PCOM_CMD_FAIL_CMD_UNREGISTERED, - PCOM_CMD_FAIL_CMD_LOCKED, - PCOM_CMD_FAIL_SERVER_NOT_YET_READY, - PCOM_CMD_FAIL_BAD_DESTINATION, - PCOM_CMD_FAIL_SERVER_RESET, - PCOM_CMD_FAIL_SMSM_NOT_INIT, - PCOM_CMD_FAIL_PROC_COMM_BUSY, - PCOM_CMD_FAIL_PROC_COMM_NOT_INIT, - -}; - -/* List of VREGs that support the Pull Down Resistor setting. */ -enum vreg_pdown_id { - PM_VREG_PDOWN_MSMA_ID, - PM_VREG_PDOWN_MSMP_ID, - PM_VREG_PDOWN_MSME1_ID, /* Not supported in Panoramix */ - PM_VREG_PDOWN_MSMC1_ID, /* Not supported in PM6620 */ - PM_VREG_PDOWN_MSMC2_ID, /* Supported in PM7500 only */ - PM_VREG_PDOWN_GP3_ID, /* Supported in PM7500 only */ - PM_VREG_PDOWN_MSME2_ID, /* Supported in PM7500 and Panoramix only */ - PM_VREG_PDOWN_GP4_ID, /* Supported in PM7500 only */ - PM_VREG_PDOWN_GP1_ID, /* Supported in PM7500 only */ - PM_VREG_PDOWN_TCXO_ID, - PM_VREG_PDOWN_PA_ID, - PM_VREG_PDOWN_RFTX_ID, - PM_VREG_PDOWN_RFRX1_ID, - PM_VREG_PDOWN_RFRX2_ID, - PM_VREG_PDOWN_SYNT_ID, - PM_VREG_PDOWN_WLAN_ID, - PM_VREG_PDOWN_USB_ID, - PM_VREG_PDOWN_MMC_ID, - PM_VREG_PDOWN_RUIM_ID, - PM_VREG_PDOWN_MSMC0_ID, /* Supported in PM6610 only */ - PM_VREG_PDOWN_GP2_ID, /* Supported in PM7500 only */ - PM_VREG_PDOWN_GP5_ID, /* Supported in PM7500 only */ - PM_VREG_PDOWN_GP6_ID, /* Supported in PM7500 only */ - PM_VREG_PDOWN_RF_ID, - PM_VREG_PDOWN_RF_VCO_ID, - PM_VREG_PDOWN_MPLL_ID, - PM_VREG_PDOWN_S2_ID, - PM_VREG_PDOWN_S3_ID, - PM_VREG_PDOWN_RFUBM_ID, - - /* new for HAN */ - PM_VREG_PDOWN_RF1_ID, - PM_VREG_PDOWN_RF2_ID, - PM_VREG_PDOWN_RFA_ID, - PM_VREG_PDOWN_CDC2_ID, - PM_VREG_PDOWN_RFTX2_ID, - PM_VREG_PDOWN_USIM_ID, - PM_VREG_PDOWN_USB2P6_ID, - PM_VREG_PDOWN_USB3P3_ID, - PM_VREG_PDOWN_INVALID_ID, - - /* backward compatible enums only */ - PM_VREG_PDOWN_CAM_ID = PM_VREG_PDOWN_GP1_ID, - PM_VREG_PDOWN_MDDI_ID = PM_VREG_PDOWN_GP2_ID, - PM_VREG_PDOWN_RUIM2_ID = PM_VREG_PDOWN_GP3_ID, - PM_VREG_PDOWN_AUX_ID = PM_VREG_PDOWN_GP4_ID, - PM_VREG_PDOWN_AUX2_ID = PM_VREG_PDOWN_GP5_ID, - PM_VREG_PDOWN_BT_ID = PM_VREG_PDOWN_GP6_ID, - - PM_VREG_PDOWN_MSME_ID = PM_VREG_PDOWN_MSME1_ID, - PM_VREG_PDOWN_MSMC_ID = PM_VREG_PDOWN_MSMC1_ID, - PM_VREG_PDOWN_RFA1_ID = PM_VREG_PDOWN_RFRX2_ID, - PM_VREG_PDOWN_RFA2_ID = PM_VREG_PDOWN_RFTX2_ID, - PM_VREG_PDOWN_XO_ID = PM_VREG_PDOWN_TCXO_ID -}; - -enum { - PCOM_CLKRGM_APPS_RESET_USB_PHY = 34, - PCOM_CLKRGM_APPS_RESET_USBH = 37, -}; - -/* gpio info for PCOM_RPC_GPIO_TLMM_CONFIG_EX */ - -#define GPIO_ENABLE 0 -#define GPIO_DISABLE 1 - -#define GPIO_INPUT 0 -#define GPIO_OUTPUT 1 - -#define GPIO_NO_PULL 0 -#define GPIO_PULL_DOWN 1 -#define GPIO_KEEPER 2 -#define GPIO_PULL_UP 3 - -#define GPIO_2MA 0 -#define GPIO_4MA 1 -#define GPIO_6MA 2 -#define GPIO_8MA 3 -#define GPIO_10MA 4 -#define GPIO_12MA 5 -#define GPIO_14MA 6 -#define GPIO_16MA 7 - -#define PCOM_GPIO_CFG(gpio, func, dir, pull, drvstr) \ - ((((gpio) & 0x3FF) << 4) | \ - ((func) & 0xf) | \ - (((dir) & 0x1) << 14) | \ - (((pull) & 0x3) << 15) | \ - (((drvstr) & 0xF) << 17)) - -int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2); -void proc_comm_boot_wait(void); - -#endif diff --git a/arch/arm/mach-msm/sirc.c b/arch/arm/mach-msm/sirc.c deleted file mode 100644 index 689e78c95f38..000000000000 --- a/arch/arm/mach-msm/sirc.c +++ /dev/null @@ -1,172 +0,0 @@ -/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - */ - -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <asm/irq.h> - -static unsigned int int_enable; -static unsigned int wake_enable; - -static struct sirc_regs_t sirc_regs = { - .int_enable = SPSS_SIRC_INT_ENABLE, - .int_enable_clear = SPSS_SIRC_INT_ENABLE_CLEAR, - .int_enable_set = SPSS_SIRC_INT_ENABLE_SET, - .int_type = SPSS_SIRC_INT_TYPE, - .int_polarity = SPSS_SIRC_INT_POLARITY, - .int_clear = SPSS_SIRC_INT_CLEAR, -}; - -static struct sirc_cascade_regs sirc_reg_table[] = { - { - .int_status = SPSS_SIRC_IRQ_STATUS, - .cascade_irq = INT_SIRC_0, - } -}; - -/* Mask off the given interrupt. Keep the int_enable mask in sync with - the enable reg, so it can be restored after power collapse. */ -static void sirc_irq_mask(struct irq_data *d) -{ - unsigned int mask; - - mask = 1 << (d->irq - FIRST_SIRC_IRQ); - writel(mask, sirc_regs.int_enable_clear); - int_enable &= ~mask; - return; -} - -/* Unmask the given interrupt. Keep the int_enable mask in sync with - the enable reg, so it can be restored after power collapse. */ -static void sirc_irq_unmask(struct irq_data *d) -{ - unsigned int mask; - - mask = 1 << (d->irq - FIRST_SIRC_IRQ); - writel(mask, sirc_regs.int_enable_set); - int_enable |= mask; - return; -} - -static void sirc_irq_ack(struct irq_data *d) -{ - unsigned int mask; - - mask = 1 << (d->irq - FIRST_SIRC_IRQ); - writel(mask, sirc_regs.int_clear); - return; -} - -static int sirc_irq_set_wake(struct irq_data *d, unsigned int on) -{ - unsigned int mask; - - /* Used to set the interrupt enable mask during power collapse. */ - mask = 1 << (d->irq - FIRST_SIRC_IRQ); - if (on) - wake_enable |= mask; - else - wake_enable &= ~mask; - - return 0; -} - -static int sirc_irq_set_type(struct irq_data *d, unsigned int flow_type) -{ - unsigned int mask; - unsigned int val; - - mask = 1 << (d->irq - FIRST_SIRC_IRQ); - val = readl(sirc_regs.int_polarity); - - if (flow_type & (IRQF_TRIGGER_LOW | IRQF_TRIGGER_FALLING)) - val |= mask; - else - val &= ~mask; - - writel(val, sirc_regs.int_polarity); - - val = readl(sirc_regs.int_type); - if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { - val |= mask; - __irq_set_handler_locked(d->irq, handle_edge_irq); - } else { - val &= ~mask; - __irq_set_handler_locked(d->irq, handle_level_irq); - } - - writel(val, sirc_regs.int_type); - - return 0; -} - -/* Finds the pending interrupt on the passed cascade irq and redrives it */ -static void sirc_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned int reg = 0; - unsigned int sirq; - unsigned int status; - - while ((reg < ARRAY_SIZE(sirc_reg_table)) && - (sirc_reg_table[reg].cascade_irq != irq)) - reg++; - - status = readl(sirc_reg_table[reg].int_status); - status &= SIRC_MASK; - if (status == 0) - return; - - for (sirq = 0; - (sirq < NR_SIRC_IRQS) && ((status & (1U << sirq)) == 0); - sirq++) - ; - generic_handle_irq(sirq+FIRST_SIRC_IRQ); - - desc->irq_data.chip->irq_ack(&desc->irq_data); -} - -static struct irq_chip sirc_irq_chip = { - .name = "sirc", - .irq_ack = sirc_irq_ack, - .irq_mask = sirc_irq_mask, - .irq_unmask = sirc_irq_unmask, - .irq_set_wake = sirc_irq_set_wake, - .irq_set_type = sirc_irq_set_type, -}; - -void __init msm_init_sirc(void) -{ - int i; - - int_enable = 0; - wake_enable = 0; - - for (i = FIRST_SIRC_IRQ; i < LAST_SIRC_IRQ; i++) { - irq_set_chip_and_handler(i, &sirc_irq_chip, handle_edge_irq); - set_irq_flags(i, IRQF_VALID); - } - - for (i = 0; i < ARRAY_SIZE(sirc_reg_table); i++) { - irq_set_chained_handler(sirc_reg_table[i].cascade_irq, - sirc_irq_handler); - irq_set_irq_wake(sirc_reg_table[i].cascade_irq, 1); - } - return; -} - diff --git a/arch/arm/mach-msm/smd.c b/arch/arm/mach-msm/smd.c deleted file mode 100644 index 7550f5a08956..000000000000 --- a/arch/arm/mach-msm/smd.c +++ /dev/null @@ -1,1034 +0,0 @@ -/* arch/arm/mach-msm/smd.c - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/fs.h> -#include <linux/cdev.h> -#include <linux/device.h> -#include <linux/wait.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/list.h> -#include <linux/slab.h> -#include <linux/debugfs.h> -#include <linux/delay.h> - -#include <mach/msm_smd.h> - -#include "smd_private.h" -#include "proc_comm.h" - -#if defined(CONFIG_ARCH_QSD8X50) -#define CONFIG_QDSP6 1 -#endif - -#define MODULE_NAME "msm_smd" - -enum { - MSM_SMD_DEBUG = 1U << 0, - MSM_SMSM_DEBUG = 1U << 0, -}; - -static int msm_smd_debug_mask; - -struct shared_info { - int ready; - void __iomem *state; -}; - -static unsigned dummy_state[SMSM_STATE_COUNT]; - -static struct shared_info smd_info = { - /* FIXME: not a real __iomem pointer */ - .state = &dummy_state, -}; - -module_param_named(debug_mask, msm_smd_debug_mask, - int, S_IRUGO | S_IWUSR | S_IWGRP); - -static unsigned last_heap_free = 0xffffffff; - -static inline void notify_other_smsm(void) -{ - msm_a2m_int(5); -#ifdef CONFIG_QDSP6 - msm_a2m_int(8); -#endif -} - -static inline void notify_modem_smd(void) -{ - msm_a2m_int(0); -} - -static inline void notify_dsp_smd(void) -{ - msm_a2m_int(8); -} - -static void smd_diag(void) -{ - char *x; - - x = smem_find(ID_DIAG_ERR_MSG, SZ_DIAG_ERR_MSG); - if (x != 0) { - x[SZ_DIAG_ERR_MSG - 1] = 0; - pr_debug("DIAG '%s'\n", x); - } -} - -/* call when SMSM_RESET flag is set in the A9's smsm_state */ -static void handle_modem_crash(void) -{ - pr_err("ARM9 has CRASHED\n"); - smd_diag(); - - /* in this case the modem or watchdog should reboot us */ - for (;;) - ; -} - -uint32_t raw_smsm_get_state(enum smsm_state_item item) -{ - return readl(smd_info.state + item * 4); -} - -static int check_for_modem_crash(void) -{ - if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET) { - handle_modem_crash(); - return -1; - } - return 0; -} - -/* the spinlock is used to synchronize between the - * irq handler and code that mutates the channel - * list or fiddles with channel state - */ -DEFINE_SPINLOCK(smd_lock); -DEFINE_SPINLOCK(smem_lock); - -/* the mutex is used during open() and close() - * operations to avoid races while creating or - * destroying smd_channel structures - */ -static DEFINE_MUTEX(smd_creation_mutex); - -static int smd_initialized; - -LIST_HEAD(smd_ch_closed_list); -LIST_HEAD(smd_ch_list_modem); -LIST_HEAD(smd_ch_list_dsp); - -static unsigned char smd_ch_allocated[64]; -static struct work_struct probe_work; - -/* how many bytes are available for reading */ -static int smd_stream_read_avail(struct smd_channel *ch) -{ - return (ch->recv->head - ch->recv->tail) & ch->fifo_mask; -} - -/* how many bytes we are free to write */ -static int smd_stream_write_avail(struct smd_channel *ch) -{ - return ch->fifo_mask - - ((ch->send->head - ch->send->tail) & ch->fifo_mask); -} - -static int smd_packet_read_avail(struct smd_channel *ch) -{ - if (ch->current_packet) { - int n = smd_stream_read_avail(ch); - if (n > ch->current_packet) - n = ch->current_packet; - return n; - } else { - return 0; - } -} - -static int smd_packet_write_avail(struct smd_channel *ch) -{ - int n = smd_stream_write_avail(ch); - return n > SMD_HEADER_SIZE ? n - SMD_HEADER_SIZE : 0; -} - -static int ch_is_open(struct smd_channel *ch) -{ - return (ch->recv->state == SMD_SS_OPENED) && - (ch->send->state == SMD_SS_OPENED); -} - -/* provide a pointer and length to readable data in the fifo */ -static unsigned ch_read_buffer(struct smd_channel *ch, void **ptr) -{ - unsigned head = ch->recv->head; - unsigned tail = ch->recv->tail; - *ptr = (void *) (ch->recv_data + tail); - - if (tail <= head) - return head - tail; - else - return ch->fifo_size - tail; -} - -/* advance the fifo read pointer after data from ch_read_buffer is consumed */ -static void ch_read_done(struct smd_channel *ch, unsigned count) -{ - BUG_ON(count > smd_stream_read_avail(ch)); - ch->recv->tail = (ch->recv->tail + count) & ch->fifo_mask; - ch->send->fTAIL = 1; -} - -/* basic read interface to ch_read_{buffer,done} used - * by smd_*_read() and update_packet_state() - * will read-and-discard if the _data pointer is null - */ -static int ch_read(struct smd_channel *ch, void *_data, int len) -{ - void *ptr; - unsigned n; - unsigned char *data = _data; - int orig_len = len; - - while (len > 0) { - n = ch_read_buffer(ch, &ptr); - if (n == 0) - break; - - if (n > len) - n = len; - if (_data) - memcpy(data, ptr, n); - - data += n; - len -= n; - ch_read_done(ch, n); - } - - return orig_len - len; -} - -static void update_stream_state(struct smd_channel *ch) -{ - /* streams have no special state requiring updating */ -} - -static void update_packet_state(struct smd_channel *ch) -{ - unsigned hdr[5]; - int r; - - /* can't do anything if we're in the middle of a packet */ - if (ch->current_packet != 0) - return; - - /* don't bother unless we can get the full header */ - if (smd_stream_read_avail(ch) < SMD_HEADER_SIZE) - return; - - r = ch_read(ch, hdr, SMD_HEADER_SIZE); - BUG_ON(r != SMD_HEADER_SIZE); - - ch->current_packet = hdr[0]; -} - -/* provide a pointer and length to next free space in the fifo */ -static unsigned ch_write_buffer(struct smd_channel *ch, void **ptr) -{ - unsigned head = ch->send->head; - unsigned tail = ch->send->tail; - *ptr = (void *) (ch->send_data + head); - - if (head < tail) { - return tail - head - 1; - } else { - if (tail == 0) - return ch->fifo_size - head - 1; - else - return ch->fifo_size - head; - } -} - -/* advace the fifo write pointer after freespace - * from ch_write_buffer is filled - */ -static void ch_write_done(struct smd_channel *ch, unsigned count) -{ - BUG_ON(count > smd_stream_write_avail(ch)); - ch->send->head = (ch->send->head + count) & ch->fifo_mask; - ch->send->fHEAD = 1; -} - -static void ch_set_state(struct smd_channel *ch, unsigned n) -{ - if (n == SMD_SS_OPENED) { - ch->send->fDSR = 1; - ch->send->fCTS = 1; - ch->send->fCD = 1; - } else { - ch->send->fDSR = 0; - ch->send->fCTS = 0; - ch->send->fCD = 0; - } - ch->send->state = n; - ch->send->fSTATE = 1; - ch->notify_other_cpu(); -} - -static void do_smd_probe(void) -{ - struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE; - if (shared->heap_info.free_offset != last_heap_free) { - last_heap_free = shared->heap_info.free_offset; - schedule_work(&probe_work); - } -} - -static void smd_state_change(struct smd_channel *ch, - unsigned last, unsigned next) -{ - ch->last_state = next; - - pr_debug("ch %d %d -> %d\n", ch->n, last, next); - - switch (next) { - case SMD_SS_OPENING: - ch->recv->tail = 0; - case SMD_SS_OPENED: - if (ch->send->state != SMD_SS_OPENED) - ch_set_state(ch, SMD_SS_OPENED); - ch->notify(ch->priv, SMD_EVENT_OPEN); - break; - case SMD_SS_FLUSHING: - case SMD_SS_RESET: - /* we should force them to close? */ - default: - ch->notify(ch->priv, SMD_EVENT_CLOSE); - } -} - -static void handle_smd_irq(struct list_head *list, void (*notify)(void)) -{ - unsigned long flags; - struct smd_channel *ch; - int do_notify = 0; - unsigned ch_flags; - unsigned tmp; - - spin_lock_irqsave(&smd_lock, flags); - list_for_each_entry(ch, list, ch_list) { - ch_flags = 0; - if (ch_is_open(ch)) { - if (ch->recv->fHEAD) { - ch->recv->fHEAD = 0; - ch_flags |= 1; - do_notify |= 1; - } - if (ch->recv->fTAIL) { - ch->recv->fTAIL = 0; - ch_flags |= 2; - do_notify |= 1; - } - if (ch->recv->fSTATE) { - ch->recv->fSTATE = 0; - ch_flags |= 4; - do_notify |= 1; - } - } - tmp = ch->recv->state; - if (tmp != ch->last_state) - smd_state_change(ch, ch->last_state, tmp); - if (ch_flags) { - ch->update_state(ch); - ch->notify(ch->priv, SMD_EVENT_DATA); - } - } - if (do_notify) - notify(); - spin_unlock_irqrestore(&smd_lock, flags); - do_smd_probe(); -} - -static irqreturn_t smd_modem_irq_handler(int irq, void *data) -{ - handle_smd_irq(&smd_ch_list_modem, notify_modem_smd); - return IRQ_HANDLED; -} - -#if defined(CONFIG_QDSP6) -static irqreturn_t smd_dsp_irq_handler(int irq, void *data) -{ - handle_smd_irq(&smd_ch_list_dsp, notify_dsp_smd); - return IRQ_HANDLED; -} -#endif - -static void smd_fake_irq_handler(unsigned long arg) -{ - handle_smd_irq(&smd_ch_list_modem, notify_modem_smd); - handle_smd_irq(&smd_ch_list_dsp, notify_dsp_smd); -} - -static DECLARE_TASKLET(smd_fake_irq_tasklet, smd_fake_irq_handler, 0); - -static inline int smd_need_int(struct smd_channel *ch) -{ - if (ch_is_open(ch)) { - if (ch->recv->fHEAD || ch->recv->fTAIL || ch->recv->fSTATE) - return 1; - if (ch->recv->state != ch->last_state) - return 1; - } - return 0; -} - -void smd_sleep_exit(void) -{ - unsigned long flags; - struct smd_channel *ch; - int need_int = 0; - - spin_lock_irqsave(&smd_lock, flags); - list_for_each_entry(ch, &smd_ch_list_modem, ch_list) { - if (smd_need_int(ch)) { - need_int = 1; - break; - } - } - list_for_each_entry(ch, &smd_ch_list_dsp, ch_list) { - if (smd_need_int(ch)) { - need_int = 1; - break; - } - } - spin_unlock_irqrestore(&smd_lock, flags); - do_smd_probe(); - - if (need_int) { - if (msm_smd_debug_mask & MSM_SMD_DEBUG) - pr_info("smd_sleep_exit need interrupt\n"); - tasklet_schedule(&smd_fake_irq_tasklet); - } -} - - -void smd_kick(smd_channel_t *ch) -{ - unsigned long flags; - unsigned tmp; - - spin_lock_irqsave(&smd_lock, flags); - ch->update_state(ch); - tmp = ch->recv->state; - if (tmp != ch->last_state) { - ch->last_state = tmp; - if (tmp == SMD_SS_OPENED) - ch->notify(ch->priv, SMD_EVENT_OPEN); - else - ch->notify(ch->priv, SMD_EVENT_CLOSE); - } - ch->notify(ch->priv, SMD_EVENT_DATA); - ch->notify_other_cpu(); - spin_unlock_irqrestore(&smd_lock, flags); -} - -static int smd_is_packet(int chn, unsigned type) -{ - type &= SMD_KIND_MASK; - if (type == SMD_KIND_PACKET) - return 1; - if (type == SMD_KIND_STREAM) - return 0; - - /* older AMSS reports SMD_KIND_UNKNOWN always */ - if ((chn > 4) || (chn == 1)) - return 1; - else - return 0; -} - -static int smd_stream_write(smd_channel_t *ch, const void *_data, int len) -{ - void *ptr; - const unsigned char *buf = _data; - unsigned xfer; - int orig_len = len; - - if (len < 0) - return -EINVAL; - - while ((xfer = ch_write_buffer(ch, &ptr)) != 0) { - if (!ch_is_open(ch)) - break; - if (xfer > len) - xfer = len; - memcpy(ptr, buf, xfer); - ch_write_done(ch, xfer); - len -= xfer; - buf += xfer; - if (len == 0) - break; - } - - ch->notify_other_cpu(); - - return orig_len - len; -} - -static int smd_packet_write(smd_channel_t *ch, const void *_data, int len) -{ - unsigned hdr[5]; - - if (len < 0) - return -EINVAL; - - if (smd_stream_write_avail(ch) < (len + SMD_HEADER_SIZE)) - return -ENOMEM; - - hdr[0] = len; - hdr[1] = hdr[2] = hdr[3] = hdr[4] = 0; - - smd_stream_write(ch, hdr, sizeof(hdr)); - smd_stream_write(ch, _data, len); - - return len; -} - -static int smd_stream_read(smd_channel_t *ch, void *data, int len) -{ - int r; - - if (len < 0) - return -EINVAL; - - r = ch_read(ch, data, len); - if (r > 0) - ch->notify_other_cpu(); - - return r; -} - -static int smd_packet_read(smd_channel_t *ch, void *data, int len) -{ - unsigned long flags; - int r; - - if (len < 0) - return -EINVAL; - - if (len > ch->current_packet) - len = ch->current_packet; - - r = ch_read(ch, data, len); - if (r > 0) - ch->notify_other_cpu(); - - spin_lock_irqsave(&smd_lock, flags); - ch->current_packet -= r; - update_packet_state(ch); - spin_unlock_irqrestore(&smd_lock, flags); - - return r; -} - -static int smd_alloc_channel(const char *name, uint32_t cid, uint32_t type) -{ - struct smd_channel *ch; - - ch = kzalloc(sizeof(struct smd_channel), GFP_KERNEL); - if (ch == 0) { - pr_err("smd_alloc_channel() out of memory\n"); - return -1; - } - ch->n = cid; - - if (_smd_alloc_channel(ch)) { - kfree(ch); - return -1; - } - - ch->fifo_mask = ch->fifo_size - 1; - ch->type = type; - - if ((type & SMD_TYPE_MASK) == SMD_TYPE_APPS_MODEM) - ch->notify_other_cpu = notify_modem_smd; - else - ch->notify_other_cpu = notify_dsp_smd; - - if (smd_is_packet(cid, type)) { - ch->read = smd_packet_read; - ch->write = smd_packet_write; - ch->read_avail = smd_packet_read_avail; - ch->write_avail = smd_packet_write_avail; - ch->update_state = update_packet_state; - } else { - ch->read = smd_stream_read; - ch->write = smd_stream_write; - ch->read_avail = smd_stream_read_avail; - ch->write_avail = smd_stream_write_avail; - ch->update_state = update_stream_state; - } - - if ((type & 0xff) == 0) - memcpy(ch->name, "SMD_", 4); - else - memcpy(ch->name, "DSP_", 4); - memcpy(ch->name + 4, name, 20); - ch->name[23] = 0; - ch->pdev.name = ch->name; - ch->pdev.id = -1; - - pr_debug("smd_alloc_channel() cid=%02d size=%05d '%s'\n", - ch->n, ch->fifo_size, ch->name); - - mutex_lock(&smd_creation_mutex); - list_add(&ch->ch_list, &smd_ch_closed_list); - mutex_unlock(&smd_creation_mutex); - - platform_device_register(&ch->pdev); - return 0; -} - -static void smd_channel_probe_worker(struct work_struct *work) -{ - struct smd_alloc_elm *shared; - unsigned ctype; - unsigned type; - unsigned n; - - shared = smem_find(ID_CH_ALLOC_TBL, sizeof(*shared) * 64); - if (!shared) { - pr_err("cannot find allocation table\n"); - return; - } - for (n = 0; n < 64; n++) { - if (smd_ch_allocated[n]) - continue; - if (!shared[n].ref_count) - continue; - if (!shared[n].name[0]) - continue; - ctype = shared[n].ctype; - type = ctype & SMD_TYPE_MASK; - - /* DAL channels are stream but neither the modem, - * nor the DSP correctly indicate this. Fixup manually. - */ - if (!memcmp(shared[n].name, "DAL", 3)) - ctype = (ctype & (~SMD_KIND_MASK)) | SMD_KIND_STREAM; - - type = shared[n].ctype & SMD_TYPE_MASK; - if ((type == SMD_TYPE_APPS_MODEM) || - (type == SMD_TYPE_APPS_DSP)) - if (!smd_alloc_channel(shared[n].name, shared[n].cid, ctype)) - smd_ch_allocated[n] = 1; - } -} - -static void do_nothing_notify(void *priv, unsigned flags) -{ -} - -struct smd_channel *smd_get_channel(const char *name) -{ - struct smd_channel *ch; - - mutex_lock(&smd_creation_mutex); - list_for_each_entry(ch, &smd_ch_closed_list, ch_list) { - if (!strcmp(name, ch->name)) { - list_del(&ch->ch_list); - mutex_unlock(&smd_creation_mutex); - return ch; - } - } - mutex_unlock(&smd_creation_mutex); - - return NULL; -} - -int smd_open(const char *name, smd_channel_t **_ch, - void *priv, void (*notify)(void *, unsigned)) -{ - struct smd_channel *ch; - unsigned long flags; - - if (smd_initialized == 0) { - pr_info("smd_open() before smd_init()\n"); - return -ENODEV; - } - - ch = smd_get_channel(name); - if (!ch) - return -ENODEV; - - if (notify == 0) - notify = do_nothing_notify; - - ch->notify = notify; - ch->current_packet = 0; - ch->last_state = SMD_SS_CLOSED; - ch->priv = priv; - - *_ch = ch; - - spin_lock_irqsave(&smd_lock, flags); - - if ((ch->type & SMD_TYPE_MASK) == SMD_TYPE_APPS_MODEM) - list_add(&ch->ch_list, &smd_ch_list_modem); - else - list_add(&ch->ch_list, &smd_ch_list_dsp); - - /* If the remote side is CLOSING, we need to get it to - * move to OPENING (which we'll do by moving from CLOSED to - * OPENING) and then get it to move from OPENING to - * OPENED (by doing the same state change ourselves). - * - * Otherwise, it should be OPENING and we can move directly - * to OPENED so that it will follow. - */ - if (ch->recv->state == SMD_SS_CLOSING) { - ch->send->head = 0; - ch_set_state(ch, SMD_SS_OPENING); - } else { - ch_set_state(ch, SMD_SS_OPENED); - } - spin_unlock_irqrestore(&smd_lock, flags); - smd_kick(ch); - - return 0; -} - -int smd_close(smd_channel_t *ch) -{ - unsigned long flags; - - if (ch == 0) - return -1; - - spin_lock_irqsave(&smd_lock, flags); - ch->notify = do_nothing_notify; - list_del(&ch->ch_list); - ch_set_state(ch, SMD_SS_CLOSED); - spin_unlock_irqrestore(&smd_lock, flags); - - mutex_lock(&smd_creation_mutex); - list_add(&ch->ch_list, &smd_ch_closed_list); - mutex_unlock(&smd_creation_mutex); - - return 0; -} - -int smd_read(smd_channel_t *ch, void *data, int len) -{ - return ch->read(ch, data, len); -} - -int smd_write(smd_channel_t *ch, const void *data, int len) -{ - return ch->write(ch, data, len); -} - -int smd_write_atomic(smd_channel_t *ch, const void *data, int len) -{ - unsigned long flags; - int res; - spin_lock_irqsave(&smd_lock, flags); - res = ch->write(ch, data, len); - spin_unlock_irqrestore(&smd_lock, flags); - return res; -} - -int smd_read_avail(smd_channel_t *ch) -{ - return ch->read_avail(ch); -} - -int smd_write_avail(smd_channel_t *ch) -{ - return ch->write_avail(ch); -} - -int smd_wait_until_readable(smd_channel_t *ch, int bytes) -{ - return -1; -} - -int smd_wait_until_writable(smd_channel_t *ch, int bytes) -{ - return -1; -} - -int smd_cur_packet_size(smd_channel_t *ch) -{ - return ch->current_packet; -} - - -/* ------------------------------------------------------------------------- */ - -void *smem_alloc(unsigned id, unsigned size) -{ - return smem_find(id, size); -} - -void __iomem *smem_item(unsigned id, unsigned *size) -{ - struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE; - struct smem_heap_entry *toc = shared->heap_toc; - - if (id >= SMEM_NUM_ITEMS) - return NULL; - - if (toc[id].allocated) { - *size = toc[id].size; - return (MSM_SHARED_RAM_BASE + toc[id].offset); - } else { - *size = 0; - } - - return NULL; -} - -void *smem_find(unsigned id, unsigned size_in) -{ - unsigned size; - void *ptr; - - ptr = smem_item(id, &size); - if (!ptr) - return 0; - - size_in = ALIGN(size_in, 8); - if (size_in != size) { - pr_err("smem_find(%d, %d): wrong size %d\n", - id, size_in, size); - return 0; - } - - return ptr; -} - -static irqreturn_t smsm_irq_handler(int irq, void *data) -{ - unsigned long flags; - unsigned apps, modm; - - spin_lock_irqsave(&smem_lock, flags); - - apps = raw_smsm_get_state(SMSM_STATE_APPS); - modm = raw_smsm_get_state(SMSM_STATE_MODEM); - - if (msm_smd_debug_mask & MSM_SMSM_DEBUG) - pr_info("<SM %08x %08x>\n", apps, modm); - if (modm & SMSM_RESET) - handle_modem_crash(); - - do_smd_probe(); - - spin_unlock_irqrestore(&smem_lock, flags); - return IRQ_HANDLED; -} - -int smsm_change_state(enum smsm_state_item item, - uint32_t clear_mask, uint32_t set_mask) -{ - void __iomem *addr = smd_info.state + item * 4; - unsigned long flags; - unsigned state; - - if (!smd_info.ready) - return -EIO; - - spin_lock_irqsave(&smem_lock, flags); - - if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET) - handle_modem_crash(); - - state = (readl(addr) & ~clear_mask) | set_mask; - writel(state, addr); - - if (msm_smd_debug_mask & MSM_SMSM_DEBUG) - pr_info("smsm_change_state %d %x\n", item, state); - notify_other_smsm(); - - spin_unlock_irqrestore(&smem_lock, flags); - - return 0; -} - -uint32_t smsm_get_state(enum smsm_state_item item) -{ - unsigned long flags; - uint32_t rv; - - spin_lock_irqsave(&smem_lock, flags); - - rv = readl(smd_info.state + item * 4); - - if (item == SMSM_STATE_MODEM && (rv & SMSM_RESET)) - handle_modem_crash(); - - spin_unlock_irqrestore(&smem_lock, flags); - - return rv; -} - -#ifdef CONFIG_ARCH_MSM_SCORPION - -int smsm_set_sleep_duration(uint32_t delay) -{ - struct msm_dem_slave_data *ptr; - - ptr = smem_find(SMEM_APPS_DEM_SLAVE_DATA, sizeof(*ptr)); - if (ptr == NULL) { - pr_err("smsm_set_sleep_duration <SM NO APPS_DEM_SLAVE_DATA>\n"); - return -EIO; - } - if (msm_smd_debug_mask & MSM_SMSM_DEBUG) - pr_info("smsm_set_sleep_duration %d -> %d\n", - ptr->sleep_time, delay); - ptr->sleep_time = delay; - return 0; -} - -#else - -int smsm_set_sleep_duration(uint32_t delay) -{ - uint32_t *ptr; - - ptr = smem_find(SMEM_SMSM_SLEEP_DELAY, sizeof(*ptr)); - if (ptr == NULL) { - pr_err("smsm_set_sleep_duration <SM NO SLEEP_DELAY>\n"); - return -EIO; - } - if (msm_smd_debug_mask & MSM_SMSM_DEBUG) - pr_info("smsm_set_sleep_duration %d -> %d\n", - *ptr, delay); - *ptr = delay; - return 0; -} - -#endif - -int smd_core_init(void) -{ - int r; - - /* wait for essential items to be initialized */ - for (;;) { - unsigned size; - void __iomem *state; - state = smem_item(SMEM_SMSM_SHARED_STATE, &size); - if (size == SMSM_V1_SIZE || size == SMSM_V2_SIZE) { - smd_info.state = state; - break; - } - } - - smd_info.ready = 1; - - r = request_irq(INT_A9_M2A_0, smd_modem_irq_handler, - IRQF_TRIGGER_RISING, "smd_dev", 0); - if (r < 0) - return r; - r = enable_irq_wake(INT_A9_M2A_0); - if (r < 0) - pr_err("smd_core_init: enable_irq_wake failed for A9_M2A_0\n"); - - r = request_irq(INT_A9_M2A_5, smsm_irq_handler, - IRQF_TRIGGER_RISING, "smsm_dev", 0); - if (r < 0) { - free_irq(INT_A9_M2A_0, 0); - return r; - } - r = enable_irq_wake(INT_A9_M2A_5); - if (r < 0) - pr_err("smd_core_init: enable_irq_wake failed for A9_M2A_5\n"); - -#if defined(CONFIG_QDSP6) - r = request_irq(INT_ADSP_A11, smd_dsp_irq_handler, - IRQF_TRIGGER_RISING, "smd_dsp", 0); - if (r < 0) { - free_irq(INT_A9_M2A_0, 0); - free_irq(INT_A9_M2A_5, 0); - return r; - } -#endif - - /* check for any SMD channels that may already exist */ - do_smd_probe(); - - /* indicate that we're up and running */ - smsm_change_state(SMSM_STATE_APPS, - ~0, SMSM_INIT | SMSM_SMDINIT | SMSM_RPCINIT | SMSM_RUN); -#ifdef CONFIG_ARCH_MSM_SCORPION - smsm_change_state(SMSM_STATE_APPS_DEM, ~0, 0); -#endif - - return 0; -} - -static int msm_smd_probe(struct platform_device *pdev) -{ - /* - * If we haven't waited for the ARM9 to boot up till now, - * then we need to wait here. Otherwise this should just - * return immediately. - */ - proc_comm_boot_wait(); - - INIT_WORK(&probe_work, smd_channel_probe_worker); - - if (smd_core_init()) { - pr_err("smd_core_init() failed\n"); - return -1; - } - - do_smd_probe(); - - msm_check_for_modem_crash = check_for_modem_crash; - - msm_init_last_radio_log(THIS_MODULE); - - smd_initialized = 1; - - return 0; -} - -static struct platform_driver msm_smd_driver = { - .probe = msm_smd_probe, - .driver = { - .name = MODULE_NAME, - }, -}; - -static int __init msm_smd_init(void) -{ - return platform_driver_register(&msm_smd_driver); -} - -module_init(msm_smd_init); - -MODULE_DESCRIPTION("MSM Shared Memory Core"); -MODULE_AUTHOR("Brian Swetland <swetland@google.com>"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-msm/smd_debug.c b/arch/arm/mach-msm/smd_debug.c deleted file mode 100644 index 8056b3e5590f..000000000000 --- a/arch/arm/mach-msm/smd_debug.c +++ /dev/null @@ -1,311 +0,0 @@ -/* arch/arm/mach-msm/smd_debug.c - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/debugfs.h> -#include <linux/list.h> - -#include <mach/msm_iomap.h> - -#include "smd_private.h" - -#if defined(CONFIG_DEBUG_FS) - -static char *chstate(unsigned n) -{ - switch (n) { - case SMD_SS_CLOSED: - return "CLOSED"; - case SMD_SS_OPENING: - return "OPENING"; - case SMD_SS_OPENED: - return "OPENED"; - case SMD_SS_FLUSHING: - return "FLUSHING"; - case SMD_SS_CLOSING: - return "CLOSING"; - case SMD_SS_RESET: - return "RESET"; - case SMD_SS_RESET_OPENING: - return "ROPENING"; - default: - return "UNKNOWN"; - } -} - - -static int dump_ch(char *buf, int max, struct smd_channel *ch) -{ - volatile struct smd_half_channel *s = ch->send; - volatile struct smd_half_channel *r = ch->recv; - - return scnprintf( - buf, max, - "ch%02d:" - " %8s(%05d/%05d) %c%c%c%c%c%c%c <->" - " %8s(%05d/%05d) %c%c%c%c%c%c%c '%s'\n", ch->n, - chstate(s->state), s->tail, s->head, - s->fDSR ? 'D' : 'd', - s->fCTS ? 'C' : 'c', - s->fCD ? 'C' : 'c', - s->fRI ? 'I' : 'i', - s->fHEAD ? 'W' : 'w', - s->fTAIL ? 'R' : 'r', - s->fSTATE ? 'S' : 's', - chstate(r->state), r->tail, r->head, - r->fDSR ? 'D' : 'd', - r->fCTS ? 'R' : 'r', - r->fCD ? 'C' : 'c', - r->fRI ? 'I' : 'i', - r->fHEAD ? 'W' : 'w', - r->fTAIL ? 'R' : 'r', - r->fSTATE ? 'S' : 's', - ch->name - ); -} - -static int debug_read_stat(char *buf, int max) -{ - char *msg; - int i = 0; - - msg = smem_find(ID_DIAG_ERR_MSG, SZ_DIAG_ERR_MSG); - - if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET) - i += scnprintf(buf + i, max - i, - "smsm: ARM9 HAS CRASHED\n"); - - i += scnprintf(buf + i, max - i, "smsm: a9: %08x a11: %08x\n", - raw_smsm_get_state(SMSM_STATE_MODEM), - raw_smsm_get_state(SMSM_STATE_APPS)); -#ifdef CONFIG_ARCH_MSM_SCORPION - i += scnprintf(buf + i, max - i, "smsm dem: apps: %08x modem: %08x " - "qdsp6: %08x power: %08x time: %08x\n", - raw_smsm_get_state(SMSM_STATE_APPS_DEM), - raw_smsm_get_state(SMSM_STATE_MODEM_DEM), - raw_smsm_get_state(SMSM_STATE_QDSP6_DEM), - raw_smsm_get_state(SMSM_STATE_POWER_MASTER_DEM), - raw_smsm_get_state(SMSM_STATE_TIME_MASTER_DEM)); -#endif - if (msg) { - msg[SZ_DIAG_ERR_MSG - 1] = 0; - i += scnprintf(buf + i, max - i, "diag: '%s'\n", msg); - } - return i; -} - -static int debug_read_mem(char *buf, int max) -{ - unsigned n; - struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE; - struct smem_heap_entry *toc = shared->heap_toc; - int i = 0; - - i += scnprintf(buf + i, max - i, - "heap: init=%d free=%d remain=%d\n", - shared->heap_info.initialized, - shared->heap_info.free_offset, - shared->heap_info.heap_remaining); - - for (n = 0; n < SMEM_NUM_ITEMS; n++) { - if (toc[n].allocated == 0) - continue; - i += scnprintf(buf + i, max - i, - "%04d: offset %08x size %08x\n", - n, toc[n].offset, toc[n].size); - } - return i; -} - -static int debug_read_ch(char *buf, int max) -{ - struct smd_channel *ch; - unsigned long flags; - int i = 0; - - spin_lock_irqsave(&smd_lock, flags); - list_for_each_entry(ch, &smd_ch_list_dsp, ch_list) - i += dump_ch(buf + i, max - i, ch); - list_for_each_entry(ch, &smd_ch_list_modem, ch_list) - i += dump_ch(buf + i, max - i, ch); - list_for_each_entry(ch, &smd_ch_closed_list, ch_list) - i += dump_ch(buf + i, max - i, ch); - spin_unlock_irqrestore(&smd_lock, flags); - - return i; -} - -static int debug_read_version(char *buf, int max) -{ - struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE; - unsigned version = shared->version[VERSION_MODEM]; - return sprintf(buf, "%d.%d\n", version >> 16, version & 0xffff); -} - -static int debug_read_build_id(char *buf, int max) -{ - unsigned size; - void *data; - - data = smem_item(SMEM_HW_SW_BUILD_ID, &size); - if (!data) - return 0; - - if (size >= max) - size = max; - memcpy(buf, data, size); - - return size; -} - -static int debug_read_alloc_tbl(char *buf, int max) -{ - struct smd_alloc_elm *shared; - int n, i = 0; - - shared = smem_find(ID_CH_ALLOC_TBL, sizeof(*shared) * 64); - - for (n = 0; n < 64; n++) { - if (shared[n].ref_count == 0) - continue; - i += scnprintf(buf + i, max - i, - "%03d: %-20s cid=%02d type=%03d " - "kind=%02d ref_count=%d\n", - n, shared[n].name, shared[n].cid, - shared[n].ctype & 0xff, - (shared[n].ctype >> 8) & 0xf, - shared[n].ref_count); - } - - return i; -} - -#define DEBUG_BUFMAX 4096 -static char debug_buffer[DEBUG_BUFMAX]; - -static ssize_t debug_read(struct file *file, char __user *buf, - size_t count, loff_t *ppos) -{ - int (*fill)(char *buf, int max) = file->private_data; - int bsize = fill(debug_buffer, DEBUG_BUFMAX); - return simple_read_from_buffer(buf, count, ppos, debug_buffer, bsize); -} - -static const struct file_operations debug_ops = { - .read = debug_read, - .open = simple_open, - .llseek = default_llseek, -}; - -static void debug_create(const char *name, umode_t mode, - struct dentry *dent, - int (*fill)(char *buf, int max)) -{ - debugfs_create_file(name, mode, dent, fill, &debug_ops); -} - -int __init smd_debugfs_init(void) -{ - struct dentry *dent; - - dent = debugfs_create_dir("smd", 0); - if (IS_ERR(dent)) - return 1; - - debug_create("ch", 0444, dent, debug_read_ch); - debug_create("stat", 0444, dent, debug_read_stat); - debug_create("mem", 0444, dent, debug_read_mem); - debug_create("version", 0444, dent, debug_read_version); - debug_create("tbl", 0444, dent, debug_read_alloc_tbl); - debug_create("build", 0444, dent, debug_read_build_id); - - return 0; -} - -#endif - - -#define MAX_NUM_SLEEP_CLIENTS 64 -#define MAX_SLEEP_NAME_LEN 8 - -#define NUM_GPIO_INT_REGISTERS 6 -#define GPIO_SMEM_NUM_GROUPS 2 -#define GPIO_SMEM_MAX_PC_INTERRUPTS 8 - -struct tramp_gpio_save { - unsigned int enable; - unsigned int detect; - unsigned int polarity; -}; - -struct tramp_gpio_smem { - uint16_t num_fired[GPIO_SMEM_NUM_GROUPS]; - uint16_t fired[GPIO_SMEM_NUM_GROUPS][GPIO_SMEM_MAX_PC_INTERRUPTS]; - uint32_t enabled[NUM_GPIO_INT_REGISTERS]; - uint32_t detection[NUM_GPIO_INT_REGISTERS]; - uint32_t polarity[NUM_GPIO_INT_REGISTERS]; -}; - - -void smsm_print_sleep_info(void) -{ - unsigned long flags; - uint32_t *ptr; -#ifndef CONFIG_ARCH_MSM_SCORPION - struct tramp_gpio_smem *gpio; - struct smsm_interrupt_info *int_info; -#endif - - - spin_lock_irqsave(&smem_lock, flags); - - ptr = smem_alloc(SMEM_SMSM_SLEEP_DELAY, sizeof(*ptr)); - if (ptr) - pr_info("SMEM_SMSM_SLEEP_DELAY: %x\n", *ptr); - - ptr = smem_alloc(SMEM_SMSM_LIMIT_SLEEP, sizeof(*ptr)); - if (ptr) - pr_info("SMEM_SMSM_LIMIT_SLEEP: %x\n", *ptr); - - ptr = smem_alloc(SMEM_SLEEP_POWER_COLLAPSE_DISABLED, sizeof(*ptr)); - if (ptr) - pr_info("SMEM_SLEEP_POWER_COLLAPSE_DISABLED: %x\n", *ptr); - -#ifndef CONFIG_ARCH_MSM_SCORPION - int_info = smem_alloc(SMEM_SMSM_INT_INFO, sizeof(*int_info)); - if (int_info) - pr_info("SMEM_SMSM_INT_INFO %x %x %x\n", - int_info->interrupt_mask, - int_info->pending_interrupts, - int_info->wakeup_reason); - - gpio = smem_alloc(SMEM_GPIO_INT, sizeof(*gpio)); - if (gpio) { - int i; - for (i = 0; i < NUM_GPIO_INT_REGISTERS; i++) - pr_info("SMEM_GPIO_INT: %d: e %x d %x p %x\n", - i, gpio->enabled[i], gpio->detection[i], - gpio->polarity[i]); - - for (i = 0; i < GPIO_SMEM_NUM_GROUPS; i++) - pr_info("SMEM_GPIO_INT: %d: f %d: %d %d...\n", - i, gpio->num_fired[i], gpio->fired[i][0], - gpio->fired[i][1]); - } -#else -#endif - spin_unlock_irqrestore(&smem_lock, flags); -} - diff --git a/arch/arm/mach-msm/smd_private.h b/arch/arm/mach-msm/smd_private.h deleted file mode 100644 index 727bfe68aa9b..000000000000 --- a/arch/arm/mach-msm/smd_private.h +++ /dev/null @@ -1,403 +0,0 @@ -/* arch/arm/mach-msm/smd_private.h - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007 QUALCOMM Incorporated - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#ifndef _ARCH_ARM_MACH_MSM_MSM_SMD_PRIVATE_H_ -#define _ARCH_ARM_MACH_MSM_MSM_SMD_PRIVATE_H_ - -#include <linux/platform_device.h> -#include <linux/spinlock.h> -#include <linux/list.h> -#include <linux/io.h> - -#include <mach/msm_iomap.h> - -struct smem_heap_info { - unsigned initialized; - unsigned free_offset; - unsigned heap_remaining; - unsigned reserved; -}; - -struct smem_heap_entry { - unsigned allocated; - unsigned offset; - unsigned size; - unsigned reserved; -}; - -struct smem_proc_comm { - unsigned command; - unsigned status; - unsigned data1; - unsigned data2; -}; - -#define PC_APPS 0 -#define PC_MODEM 1 - -#define VERSION_SMD 0 -#define VERSION_QDSP6 4 -#define VERSION_APPS_SBL 6 -#define VERSION_MODEM_SBL 7 -#define VERSION_APPS 8 -#define VERSION_MODEM 9 - -struct smem_shared { - struct smem_proc_comm proc_comm[4]; - unsigned version[32]; - struct smem_heap_info heap_info; - struct smem_heap_entry heap_toc[512]; -}; - -#define SMSM_V1_SIZE (sizeof(unsigned) * 8) -#define SMSM_V2_SIZE (sizeof(unsigned) * 4) - -#ifdef CONFIG_MSM_SMD_PKG3 -struct smsm_interrupt_info { - uint32_t interrupt_mask; - uint32_t pending_interrupts; - uint32_t wakeup_reason; -}; -#else -#define DEM_MAX_PORT_NAME_LEN (20) -struct msm_dem_slave_data { - uint32_t sleep_time; - uint32_t interrupt_mask; - uint32_t resources_used; - uint32_t reserved1; - - uint32_t wakeup_reason; - uint32_t pending_interrupts; - uint32_t rpc_prog; - uint32_t rpc_proc; - char smd_port_name[DEM_MAX_PORT_NAME_LEN]; - uint32_t reserved2; -}; -#endif - -#define SZ_DIAG_ERR_MSG 0xC8 -#define ID_DIAG_ERR_MSG SMEM_DIAG_ERR_MESSAGE -#define ID_SMD_CHANNELS SMEM_SMD_BASE_ID -#define ID_SHARED_STATE SMEM_SMSM_SHARED_STATE -#define ID_CH_ALLOC_TBL SMEM_CHANNEL_ALLOC_TBL - -#define SMSM_INIT 0x00000001 -#define SMSM_SMDINIT 0x00000008 -#define SMSM_RPCINIT 0x00000020 -#define SMSM_RESET 0x00000040 -#define SMSM_RSA 0x00000080 -#define SMSM_RUN 0x00000100 -#define SMSM_PWRC 0x00000200 -#define SMSM_TIMEWAIT 0x00000400 -#define SMSM_TIMEINIT 0x00000800 -#define SMSM_PWRC_EARLY_EXIT 0x00001000 -#define SMSM_WFPI 0x00002000 -#define SMSM_SLEEP 0x00004000 -#define SMSM_SLEEPEXIT 0x00008000 -#define SMSM_APPS_REBOOT 0x00020000 -#define SMSM_SYSTEM_POWER_DOWN 0x00040000 -#define SMSM_SYSTEM_REBOOT 0x00080000 -#define SMSM_SYSTEM_DOWNLOAD 0x00100000 -#define SMSM_PWRC_SUSPEND 0x00200000 -#define SMSM_APPS_SHUTDOWN 0x00400000 -#define SMSM_SMD_LOOPBACK 0x00800000 -#define SMSM_RUN_QUIET 0x01000000 -#define SMSM_MODEM_WAIT 0x02000000 -#define SMSM_MODEM_BREAK 0x04000000 -#define SMSM_MODEM_CONTINUE 0x08000000 -#define SMSM_UNKNOWN 0x80000000 - -#define SMSM_WKUP_REASON_RPC 0x00000001 -#define SMSM_WKUP_REASON_INT 0x00000002 -#define SMSM_WKUP_REASON_GPIO 0x00000004 -#define SMSM_WKUP_REASON_TIMER 0x00000008 -#define SMSM_WKUP_REASON_ALARM 0x00000010 -#define SMSM_WKUP_REASON_RESET 0x00000020 - -#ifdef CONFIG_ARCH_MSM7X00A -enum smsm_state_item { - SMSM_STATE_APPS = 1, - SMSM_STATE_MODEM = 3, - SMSM_STATE_COUNT, -}; -#else -enum smsm_state_item { - SMSM_STATE_APPS, - SMSM_STATE_MODEM, - SMSM_STATE_HEXAGON, - SMSM_STATE_APPS_DEM, - SMSM_STATE_MODEM_DEM, - SMSM_STATE_QDSP6_DEM, - SMSM_STATE_POWER_MASTER_DEM, - SMSM_STATE_TIME_MASTER_DEM, - SMSM_STATE_COUNT, -}; -#endif - -void *smem_alloc(unsigned id, unsigned size); -int smsm_change_state(enum smsm_state_item item, uint32_t clear_mask, uint32_t set_mask); -uint32_t smsm_get_state(enum smsm_state_item item); -int smsm_set_sleep_duration(uint32_t delay); -void smsm_print_sleep_info(void); - -#define SMEM_NUM_SMD_CHANNELS 64 - -typedef enum { - /* fixed items */ - SMEM_PROC_COMM = 0, - SMEM_HEAP_INFO, - SMEM_ALLOCATION_TABLE, - SMEM_VERSION_INFO, - SMEM_HW_RESET_DETECT, - SMEM_AARM_WARM_BOOT, - SMEM_DIAG_ERR_MESSAGE, - SMEM_SPINLOCK_ARRAY, - SMEM_MEMORY_BARRIER_LOCATION, - - /* dynamic items */ - SMEM_AARM_PARTITION_TABLE, - SMEM_AARM_BAD_BLOCK_TABLE, - SMEM_RESERVE_BAD_BLOCKS, - SMEM_WM_UUID, - SMEM_CHANNEL_ALLOC_TBL, - SMEM_SMD_BASE_ID, - SMEM_SMEM_LOG_IDX = SMEM_SMD_BASE_ID + SMEM_NUM_SMD_CHANNELS, - SMEM_SMEM_LOG_EVENTS, - SMEM_SMEM_STATIC_LOG_IDX, - SMEM_SMEM_STATIC_LOG_EVENTS, - SMEM_SMEM_SLOW_CLOCK_SYNC, - SMEM_SMEM_SLOW_CLOCK_VALUE, - SMEM_BIO_LED_BUF, - SMEM_SMSM_SHARED_STATE, - SMEM_SMSM_INT_INFO, - SMEM_SMSM_SLEEP_DELAY, - SMEM_SMSM_LIMIT_SLEEP, - SMEM_SLEEP_POWER_COLLAPSE_DISABLED, - SMEM_KEYPAD_KEYS_PRESSED, - SMEM_KEYPAD_STATE_UPDATED, - SMEM_KEYPAD_STATE_IDX, - SMEM_GPIO_INT, - SMEM_MDDI_LCD_IDX, - SMEM_MDDI_HOST_DRIVER_STATE, - SMEM_MDDI_LCD_DISP_STATE, - SMEM_LCD_CUR_PANEL, - SMEM_MARM_BOOT_SEGMENT_INFO, - SMEM_AARM_BOOT_SEGMENT_INFO, - SMEM_SLEEP_STATIC, - SMEM_SCORPION_FREQUENCY, - SMEM_SMD_PROFILES, - SMEM_TSSC_BUSY, - SMEM_HS_SUSPEND_FILTER_INFO, - SMEM_BATT_INFO, - SMEM_APPS_BOOT_MODE, - SMEM_VERSION_FIRST, - SMEM_VERSION_LAST = SMEM_VERSION_FIRST + 24, - SMEM_OSS_RRCASN1_BUF1, - SMEM_OSS_RRCASN1_BUF2, - SMEM_ID_VENDOR0, - SMEM_ID_VENDOR1, - SMEM_ID_VENDOR2, - SMEM_HW_SW_BUILD_ID, - SMEM_SMD_BLOCK_PORT_BASE_ID, - SMEM_SMD_BLOCK_PORT_PROC0_HEAP = SMEM_SMD_BLOCK_PORT_BASE_ID + SMEM_NUM_SMD_CHANNELS, - SMEM_SMD_BLOCK_PORT_PROC1_HEAP = SMEM_SMD_BLOCK_PORT_PROC0_HEAP + SMEM_NUM_SMD_CHANNELS, - SMEM_I2C_MUTEX = SMEM_SMD_BLOCK_PORT_PROC1_HEAP + SMEM_NUM_SMD_CHANNELS, - SMEM_SCLK_CONVERSION, - SMEM_SMD_SMSM_INTR_MUX, - SMEM_SMSM_CPU_INTR_MASK, - SMEM_APPS_DEM_SLAVE_DATA, - SMEM_QDSP6_DEM_SLAVE_DATA, - SMEM_CLKREGIM_BSP, - SMEM_CLKREGIM_SOURCES, - SMEM_SMD_FIFO_BASE_ID, - SMEM_USABLE_RAM_PARTITION_TABLE = SMEM_SMD_FIFO_BASE_ID + SMEM_NUM_SMD_CHANNELS, - SMEM_POWER_ON_STATUS_INFO, - SMEM_DAL_AREA, - SMEM_SMEM_LOG_POWER_IDX, - SMEM_SMEM_LOG_POWER_WRAP, - SMEM_SMEM_LOG_POWER_EVENTS, - SMEM_ERR_CRASH_LOG, - SMEM_ERR_F3_TRACE_LOG, - SMEM_NUM_ITEMS, -} smem_mem_type; - - -#define SMD_SS_CLOSED 0x00000000 -#define SMD_SS_OPENING 0x00000001 -#define SMD_SS_OPENED 0x00000002 -#define SMD_SS_FLUSHING 0x00000003 -#define SMD_SS_CLOSING 0x00000004 -#define SMD_SS_RESET 0x00000005 -#define SMD_SS_RESET_OPENING 0x00000006 - -#define SMD_BUF_SIZE 8192 -#define SMD_CHANNELS 64 - -#define SMD_HEADER_SIZE 20 - -struct smd_alloc_elm { - char name[20]; - uint32_t cid; - uint32_t ctype; - uint32_t ref_count; -}; - -struct smd_half_channel { - unsigned state; - unsigned char fDSR; - unsigned char fCTS; - unsigned char fCD; - unsigned char fRI; - unsigned char fHEAD; - unsigned char fTAIL; - unsigned char fSTATE; - unsigned char fUNUSED; - unsigned tail; - unsigned head; -} __attribute__(( aligned(4), packed )); - -/* Only used on SMD package v3 on msm7201a */ -struct smd_shared_v1 { - struct smd_half_channel ch0; - unsigned char data0[SMD_BUF_SIZE]; - struct smd_half_channel ch1; - unsigned char data1[SMD_BUF_SIZE]; -}; - -/* Used on SMD package v4 */ -struct smd_shared_v2 { - struct smd_half_channel ch0; - struct smd_half_channel ch1; -}; - -struct smd_channel { - volatile struct smd_half_channel *send; - volatile struct smd_half_channel *recv; - unsigned char *send_data; - unsigned char *recv_data; - - unsigned fifo_mask; - unsigned fifo_size; - unsigned current_packet; - unsigned n; - - struct list_head ch_list; - - void *priv; - void (*notify)(void *priv, unsigned flags); - - int (*read)(struct smd_channel *ch, void *data, int len); - int (*write)(struct smd_channel *ch, const void *data, int len); - int (*read_avail)(struct smd_channel *ch); - int (*write_avail)(struct smd_channel *ch); - - void (*update_state)(struct smd_channel *ch); - unsigned last_state; - void (*notify_other_cpu)(void); - unsigned type; - - char name[32]; - struct platform_device pdev; -}; - -#define SMD_TYPE_MASK 0x0FF -#define SMD_TYPE_APPS_MODEM 0x000 -#define SMD_TYPE_APPS_DSP 0x001 -#define SMD_TYPE_MODEM_DSP 0x002 - -#define SMD_KIND_MASK 0xF00 -#define SMD_KIND_UNKNOWN 0x000 -#define SMD_KIND_STREAM 0x100 -#define SMD_KIND_PACKET 0x200 - -extern struct list_head smd_ch_closed_list; -extern struct list_head smd_ch_list_modem; -extern struct list_head smd_ch_list_dsp; - -extern spinlock_t smd_lock; -extern spinlock_t smem_lock; - -void *smem_find(unsigned id, unsigned size); -void *smem_item(unsigned id, unsigned *size); -uint32_t raw_smsm_get_state(enum smsm_state_item item); - -extern void msm_init_last_radio_log(struct module *); - -#ifdef CONFIG_MSM_SMD_PKG3 -/* - * This allocator assumes an SMD Package v3 which only exists on - * MSM7x00 SoC's. - */ -static inline int _smd_alloc_channel(struct smd_channel *ch) -{ - struct smd_shared_v1 *shared1; - - shared1 = smem_alloc(ID_SMD_CHANNELS + ch->n, sizeof(*shared1)); - if (!shared1) { - pr_err("smd_alloc_channel() cid %d does not exist\n", ch->n); - return -1; - } - ch->send = &shared1->ch0; - ch->recv = &shared1->ch1; - ch->send_data = shared1->data0; - ch->recv_data = shared1->data1; - ch->fifo_size = SMD_BUF_SIZE; - return 0; -} -#else -/* - * This allocator assumes an SMD Package v4, the most common - * and the default. - */ -static inline int _smd_alloc_channel(struct smd_channel *ch) -{ - struct smd_shared_v2 *shared2; - void *buffer; - unsigned buffer_sz; - - shared2 = smem_alloc(SMEM_SMD_BASE_ID + ch->n, sizeof(*shared2)); - buffer = smem_item(SMEM_SMD_FIFO_BASE_ID + ch->n, &buffer_sz); - - if (!buffer) - return -1; - - /* buffer must be a power-of-two size */ - if (buffer_sz & (buffer_sz - 1)) - return -1; - - buffer_sz /= 2; - ch->send = &shared2->ch0; - ch->recv = &shared2->ch1; - ch->send_data = buffer; - ch->recv_data = buffer + buffer_sz; - ch->fifo_size = buffer_sz; - return 0; -} -#endif /* CONFIG_MSM_SMD_PKG3 */ - -#if defined(CONFIG_ARCH_MSM7X30) -static inline void msm_a2m_int(uint32_t irq) -{ - writel(1 << irq, MSM_GCC_BASE + 0x8); -} -#else -static inline void msm_a2m_int(uint32_t irq) -{ - writel(1, MSM_CSR_BASE + 0x400 + (irq * 4)); -} -#endif /* CONFIG_ARCH_MSM7X30 */ - - -#endif diff --git a/arch/arm/mach-msm/vreg.c b/arch/arm/mach-msm/vreg.c deleted file mode 100644 index bd66ed04d6dc..000000000000 --- a/arch/arm/mach-msm/vreg.c +++ /dev/null @@ -1,220 +0,0 @@ -/* arch/arm/mach-msm/vreg.c - * - * Copyright (C) 2008 Google, Inc. - * Copyright (c) 2009, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/init.h> -#include <linux/debugfs.h> -#include <linux/module.h> -#include <linux/string.h> -#include <mach/vreg.h> - -#include "proc_comm.h" - -struct vreg { - const char *name; - unsigned id; - int status; - unsigned refcnt; -}; - -#define VREG(_name, _id, _status, _refcnt) \ - { .name = _name, .id = _id, .status = _status, .refcnt = _refcnt } - -static struct vreg vregs[] = { - VREG("msma", 0, 0, 0), - VREG("msmp", 1, 0, 0), - VREG("msme1", 2, 0, 0), - VREG("msmc1", 3, 0, 0), - VREG("msmc2", 4, 0, 0), - VREG("gp3", 5, 0, 0), - VREG("msme2", 6, 0, 0), - VREG("gp4", 7, 0, 0), - VREG("gp1", 8, 0, 0), - VREG("tcxo", 9, 0, 0), - VREG("pa", 10, 0, 0), - VREG("rftx", 11, 0, 0), - VREG("rfrx1", 12, 0, 0), - VREG("rfrx2", 13, 0, 0), - VREG("synt", 14, 0, 0), - VREG("wlan", 15, 0, 0), - VREG("usb", 16, 0, 0), - VREG("boost", 17, 0, 0), - VREG("mmc", 18, 0, 0), - VREG("ruim", 19, 0, 0), - VREG("msmc0", 20, 0, 0), - VREG("gp2", 21, 0, 0), - VREG("gp5", 22, 0, 0), - VREG("gp6", 23, 0, 0), - VREG("rf", 24, 0, 0), - VREG("rf_vco", 26, 0, 0), - VREG("mpll", 27, 0, 0), - VREG("s2", 28, 0, 0), - VREG("s3", 29, 0, 0), - VREG("rfubm", 30, 0, 0), - VREG("ncp", 31, 0, 0), - VREG("gp7", 32, 0, 0), - VREG("gp8", 33, 0, 0), - VREG("gp9", 34, 0, 0), - VREG("gp10", 35, 0, 0), - VREG("gp11", 36, 0, 0), - VREG("gp12", 37, 0, 0), - VREG("gp13", 38, 0, 0), - VREG("gp14", 39, 0, 0), - VREG("gp15", 40, 0, 0), - VREG("gp16", 41, 0, 0), - VREG("gp17", 42, 0, 0), - VREG("s4", 43, 0, 0), - VREG("usb2", 44, 0, 0), - VREG("wlan2", 45, 0, 0), - VREG("xo_out", 46, 0, 0), - VREG("lvsw0", 47, 0, 0), - VREG("lvsw1", 48, 0, 0), -}; - -struct vreg *vreg_get(struct device *dev, const char *id) -{ - int n; - for (n = 0; n < ARRAY_SIZE(vregs); n++) { - if (!strcmp(vregs[n].name, id)) - return vregs + n; - } - return ERR_PTR(-ENOENT); -} - -void vreg_put(struct vreg *vreg) -{ -} - -int vreg_enable(struct vreg *vreg) -{ - unsigned id = vreg->id; - unsigned enable = 1; - - if (vreg->refcnt == 0) - vreg->status = msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable); - - if ((vreg->refcnt < UINT_MAX) && (!vreg->status)) - vreg->refcnt++; - - return vreg->status; -} - -int vreg_disable(struct vreg *vreg) -{ - unsigned id = vreg->id; - unsigned enable = 0; - - if (!vreg->refcnt) - return 0; - - if (vreg->refcnt == 1) - vreg->status = msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable); - - if (!vreg->status) - vreg->refcnt--; - - return vreg->status; -} - -int vreg_set_level(struct vreg *vreg, unsigned mv) -{ - unsigned id = vreg->id; - - vreg->status = msm_proc_comm(PCOM_VREG_SET_LEVEL, &id, &mv); - return vreg->status; -} - -#if defined(CONFIG_DEBUG_FS) - -static int vreg_debug_set(void *data, u64 val) -{ - struct vreg *vreg = data; - switch (val) { - case 0: - vreg_disable(vreg); - break; - case 1: - vreg_enable(vreg); - break; - default: - vreg_set_level(vreg, val); - break; - } - return 0; -} - -static int vreg_debug_get(void *data, u64 *val) -{ - struct vreg *vreg = data; - - if (!vreg->status) - *val = 0; - else - *val = 1; - - return 0; -} - -static int vreg_debug_count_set(void *data, u64 val) -{ - struct vreg *vreg = data; - if (val > UINT_MAX) - val = UINT_MAX; - vreg->refcnt = val; - return 0; -} - -static int vreg_debug_count_get(void *data, u64 *val) -{ - struct vreg *vreg = data; - - *val = vreg->refcnt; - - return 0; -} - -DEFINE_SIMPLE_ATTRIBUTE(vreg_fops, vreg_debug_get, vreg_debug_set, "%llu\n"); -DEFINE_SIMPLE_ATTRIBUTE(vreg_count_fops, vreg_debug_count_get, - vreg_debug_count_set, "%llu\n"); - -static int __init vreg_debug_init(void) -{ - struct dentry *dent; - int n; - char name[32]; - const char *refcnt_name = "_refcnt"; - - dent = debugfs_create_dir("vreg", 0); - if (IS_ERR(dent)) - return 0; - - for (n = 0; n < ARRAY_SIZE(vregs); n++) { - (void) debugfs_create_file(vregs[n].name, 0644, - dent, vregs + n, &vreg_fops); - - strlcpy(name, vregs[n].name, sizeof(name)); - strlcat(name, refcnt_name, sizeof(name)); - (void) debugfs_create_file(name, 0644, - dent, vregs + n, &vreg_count_fops); - } - - return 0; -} - -device_initcall(vreg_debug_init); -#endif diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index 445e553f4a28..097ea4cb1136 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -197,17 +197,13 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); static struct pci_bus __init * mv78xx0_pcie_scan_bus(int nr, struct pci_sys_data *sys) { - struct pci_bus *bus; - - if (nr < num_pcie_ports) { - bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys, - &sys->resources); - } else { - bus = NULL; + if (nr >= num_pcie_ports) { BUG(); + return NULL; } - return bus; + return pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys, + &sys->resources); } static int __init mv78xx0_pcie_map_irq(const struct pci_dev *dev, u8 slot, diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index c1e4567a5ab3..97473168d6b6 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -64,6 +64,20 @@ config MACH_ARMADA_38X Say 'Y' here if you want your kernel to support boards based on the Marvell Armada 380/385 SoC with device tree. +config MACH_ARMADA_39X + bool "Marvell Armada 39x boards" if ARCH_MULTI_V7 + select ARM_GIC + select ARMADA_39X_CLK + select CACHE_L2X0 + select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP + select HAVE_SMP + select MACH_MVEBU_V7 + select PINCTRL_ARMADA_39X + help + Say 'Y' here if you want your kernel to support boards based + on the Marvell Armada 39x SoC with device tree. + config MACH_ARMADA_XP bool "Marvell Armada XP boards" if ARCH_MULTI_V7 select ARMADA_XP_CLK diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 89a139ed7d5b..afee9083ad92 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -184,7 +184,7 @@ static void __init mvebu_dt_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static const char * const armada_370_xp_dt_compat[] = { +static const char * const armada_370_xp_dt_compat[] __initconst = { "marvell,armada-370-xp", NULL, }; @@ -205,7 +205,7 @@ DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)") .dt_compat = armada_370_xp_dt_compat, MACHINE_END -static const char * const armada_375_dt_compat[] = { +static const char * const armada_375_dt_compat[] __initconst = { "marvell,armada375", NULL, }; @@ -219,7 +219,7 @@ DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)") .dt_compat = armada_375_dt_compat, MACHINE_END -static const char * const armada_38x_dt_compat[] = { +static const char * const armada_38x_dt_compat[] __initconst = { "marvell,armada380", "marvell,armada385", NULL, @@ -232,3 +232,17 @@ DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)") .restart = mvebu_restart, .dt_compat = armada_38x_dt_compat, MACHINE_END + +static const char * const armada_39x_dt_compat[] __initconst = { + "marvell,armada390", + "marvell,armada398", + NULL, +}; + +DT_MACHINE_START(ARMADA_39X_DT, "Marvell Armada 39x (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .init_irq = mvebu_init_irq, + .restart = mvebu_restart, + .dt_compat = armada_39x_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-mvebu/dove.c b/arch/arm/mach-mvebu/dove.c index b50464ec1130..5a1741500a30 100644 --- a/arch/arm/mach-mvebu/dove.c +++ b/arch/arm/mach-mvebu/dove.c @@ -27,7 +27,7 @@ static void __init dove_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static const char * const dove_dt_compat[] = { +static const char * const dove_dt_compat[] __initconst = { "marvell,dove", NULL }; diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c index 6b5310828eb2..925f75f54268 100644 --- a/arch/arm/mach-mvebu/kirkwood.c +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -186,7 +186,7 @@ static void __init kirkwood_dt_init(void) of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL); } -static const char * const kirkwood_dt_board_compat[] = { +static const char * const kirkwood_dt_board_compat[] __initconst = { "marvell,kirkwood", NULL }; diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c index 2ec1a42b4321..df0a9cc5da59 100644 --- a/arch/arm/mach-mvebu/platsmp-a9.c +++ b/arch/arm/mach-mvebu/platsmp-a9.c @@ -110,3 +110,5 @@ CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp", &mvebu_cortex_a9_smp_ops); CPU_METHOD_OF_DECLARE(mvebu_armada_380_smp, "marvell,armada-380-smp", &armada_38x_smp_ops); +CPU_METHOD_OF_DECLARE(mvebu_armada_390_smp, "marvell,armada-390-smp", + &armada_38x_smp_ops); diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index 8b9f5e202ccf..4f4e22206ae5 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -415,6 +415,9 @@ static __init int armada_38x_cpuidle_init(void) void __iomem *mpsoc_base; u32 reg; + pr_warn("CPU idle is currently broken on Armada 38x: disabling"); + return 0; + np = of_find_compatible_node(NULL, NULL, "marvell,armada-380-coherency-fabric"); if (!np) @@ -476,6 +479,16 @@ static int __init mvebu_v7_cpu_pm_init(void) return 0; of_node_put(np); + /* + * Currently the CPU idle support for Armada 38x is broken, as + * the CPU hotplug uses some of the CPU idle functions it is + * broken too, so let's disable it + */ + if (of_machine_is_compatible("marvell,armada380")) { + cpu_hotplug_disable(); + pr_warn("CPU hotplug support is currently broken on Armada 38x: disabling"); + } + if (of_machine_is_compatible("marvell,armadaxp")) ret = armada_xp_cpuidle_init(); else if (of_machine_is_compatible("marvell,armada370")) @@ -489,7 +502,8 @@ static int __init mvebu_v7_cpu_pm_init(void) return ret; mvebu_v7_pmsu_enable_l2_powerdown_onidle(); - platform_device_register(&mvebu_v7_cpuidle_device); + if (mvebu_v7_cpuidle_device.name) + platform_device_register(&mvebu_v7_cpuidle_device); cpu_pm_register_notifier(&mvebu_v7_cpu_pm_notifier); return 0; diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 34b4c0044961..dd94567c3628 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -71,13 +71,7 @@ static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; -#ifndef CONFIG_OMAP_32K_TIMER - -static unsigned short enable_dyn_sleep = 0; - -#else - -static unsigned short enable_dyn_sleep = 1; +static unsigned short enable_dyn_sleep; static ssize_t idle_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) @@ -90,8 +84,9 @@ static ssize_t idle_store(struct kobject *kobj, struct kobj_attribute *attr, { unsigned short value; if (sscanf(buf, "%hu", &value) != 1 || - (value != 0 && value != 1)) { - printk(KERN_ERR "idle_sleep_store: Invalid value\n"); + (value != 0 && value != 1) || + (value != 0 && !IS_ENABLED(CONFIG_OMAP_32K_TIMER))) { + pr_err("idle_sleep_store: Invalid value\n"); return -EINVAL; } enable_dyn_sleep = value; @@ -101,7 +96,6 @@ static ssize_t idle_store(struct kobject *kobj, struct kobj_attribute *attr, static struct kobj_attribute sleep_while_idle_attr = __ATTR(sleep_while_idle, 0644, idle_show, idle_store); -#endif static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; @@ -115,16 +109,11 @@ void omap1_pm_idle(void) { extern __u32 arm_idlect1_mask; __u32 use_idlect1 = arm_idlect1_mask; - int do_sleep = 0; local_fiq_disable(); #if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER) -#warning Enable 32kHz OS timer in order to allow sleep states in idle use_idlect1 = use_idlect1 & ~(1 << 9); -#else - if (enable_dyn_sleep) - do_sleep = 1; #endif #ifdef CONFIG_OMAP_DM_TIMER @@ -134,10 +123,12 @@ void omap1_pm_idle(void) if (omap_dma_running()) use_idlect1 &= ~(1 << 6); - /* We should be able to remove the do_sleep variable and multiple + /* + * We should be able to remove the do_sleep variable and multiple * tests above as soon as drivers, timer and DMA code have been fixed. - * Even the sleep block count should become obsolete. */ - if ((use_idlect1 != ~0) || !do_sleep) { + * Even the sleep block count should become obsolete. + */ + if ((use_idlect1 != ~0) || !enable_dyn_sleep) { __u32 saved_idlect1 = omap_readl(ARM_IDLECT1); if (cpu_is_omap15xx()) @@ -635,15 +626,25 @@ static const struct platform_suspend_ops omap_pm_ops = { static int __init omap_pm_init(void) { - -#ifdef CONFIG_OMAP_32K_TIMER - int error; -#endif + int error = 0; if (!cpu_class_is_omap1()) return -ENODEV; - printk("Power Management for TI OMAP.\n"); + pr_info("Power Management for TI OMAP.\n"); + + if (!IS_ENABLED(CONFIG_OMAP_32K_TIMER)) + pr_info("OMAP1 PM: sleep states in idle disabled due to no 32KiHz timer\n"); + + if (!IS_ENABLED(CONFIG_OMAP_DM_TIMER)) + pr_info("OMAP1 PM: sleep states in idle disabled due to no DMTIMER support\n"); + + if (IS_ENABLED(CONFIG_OMAP_32K_TIMER) && + IS_ENABLED(CONFIG_OMAP_DM_TIMER)) { + /* OMAP16xx only */ + pr_info("OMAP1 PM: sleep states in idle enabled\n"); + enable_dyn_sleep = 1; + } /* * We copy the assembler sleep/wakeup routines to SRAM. @@ -693,17 +694,15 @@ static int __init omap_pm_init(void) omap_pm_init_debugfs(); #endif -#ifdef CONFIG_OMAP_32K_TIMER error = sysfs_create_file(power_kobj, &sleep_while_idle_attr.attr); if (error) printk(KERN_ERR "sysfs_create_file failed: %d\n", error); -#endif if (cpu_is_omap16xx()) { /* configure LOW_PWR pin */ omap_cfg_reg(T20_1610_LOW_PWR); } - return 0; + return error; } __initcall(omap_pm_init); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 2b8e47788062..6468f15f060c 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -69,6 +69,7 @@ config SOC_DRA7XX select ARM_GIC select HAVE_ARM_ARCH_TIMER select IRQ_CROSSBAR + select ARM_ERRATA_798181 if SMP config ARCH_OMAP2PLUS bool @@ -80,6 +81,7 @@ config ARCH_OMAP2PLUS select GENERIC_IRQ_CHIP select MACH_OMAP_GENERIC select MEMORY + select MFD_SYSCON select OMAP_DM_TIMER select OMAP_GPMC select PINCTRL @@ -175,12 +177,6 @@ config MACH_OMAP3_BEAGLE default y select OMAP_PACKAGE_CBB -config MACH_DEVKIT8000 - bool "DEVKIT8000 board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CUS - config MACH_OMAP_LDP bool "OMAP3 LDP board" depends on ARCH_OMAP3 @@ -225,12 +221,6 @@ config MACH_OMAP3_PANDORA select OMAP_PACKAGE_CBB select REGULATOR_FIXED_VOLTAGE if REGULATOR -config MACH_TOUCHBOOK - bool "OMAP3 Touch Book" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - config MACH_NOKIA_N810 bool @@ -260,12 +250,6 @@ config MACH_CM_T35 config MACH_CM_T3730 bool -config MACH_SBC3530 - bool "OMAP3 SBC STALKER board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CUS - config OMAP3_SDRC_AC_TIMING bool "Enable SDRC AC timing register changes" depends on ARCH_OMAP3 @@ -278,27 +262,6 @@ config OMAP3_SDRC_AC_TIMING wish to say no. Selecting yes without understanding what is going on could result in system crashes; -config OMAP4_ERRATA_I688 - bool "OMAP4 errata: Async Bridge Corruption" - depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM - select ARCH_HAS_BARRIERS - help - If a data is stalled inside asynchronous bridge because of back - pressure, it may be accepted multiple times, creating pointer - misalignment that will corrupt next transfers on that data path - until next reset of the system (No recovery procedure once the - issue is hit, the path remains consistently broken). Async bridge - can be found on path between MPU to EMIF and MPU to L3 interconnect. - This situation can happen only when the idle is initiated by a - Master Request Disconnection (which is trigged by software when - executing WFI on CPU). - The work-around for this errata needs all the initiators connected - through async bridge must ensure that data path is properly drained - before issuing WFI. This condition will be met if one Strongly ordered - access is performed to the target right before executing the WFI. - In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained. - IO barrier ensure that there is no synchronisation loss on initiators - operating on both interconnect port simultaneously. endmenu endif diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b83f18fcec9b..ec002bd4af77 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -243,7 +243,6 @@ obj-$(CONFIG_SOC_OMAP2420) += msdi.o # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o -obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o @@ -254,9 +253,6 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o -obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o - -obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o # Platform specific device init code diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c deleted file mode 100644 index d8e4f346936a..000000000000 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ /dev/null @@ -1,654 +0,0 @@ -/* - * board-devkit8000.c - TimLL Devkit8000 - * - * Copyright (C) 2009 Kim Botherway - * Copyright (C) 2010 Thomas Weber - * - * Modified from mach-omap2/board-omap3beagle.c - * - * Initial code: Syed Mohammed Khasim - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/leds.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/nand.h> -#include <linux/mmc/host.h> -#include <linux/usb/phy.h> - -#include <linux/regulator/machine.h> -#include <linux/i2c/twl.h> -#include "id.h" -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> - -#include "common.h" -#include "gpmc.h" -#include <linux/platform_data/mtd-nand-omap2.h> -#include <video/omapdss.h> -#include <video/omap-panel-data.h> - -#include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/input/matrix_keypad.h> -#include <linux/spi/spi.h> -#include <linux/dm9000.h> -#include <linux/interrupt.h> - -#include "sdram-micron-mt46h32m32lf-6.h" -#include "mux.h" -#include "hsmmc.h" -#include "board-flash.h" -#include "common-board-devices.h" - -#define NAND_CS 0 - -#define OMAP_DM9000_GPIO_IRQ 25 -#define OMAP3_DEVKIT_TS_GPIO 27 - -static struct mtd_partition devkit8000_nand_partitions[] = { - /* All the partition sizes are listed in terms of NAND block size */ - { - .name = "X-Loader", - .offset = 0, - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 15 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot Env", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ - .size = 1 * NAND_BLOCK_SIZE, - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ - .size = 32 * NAND_BLOCK_SIZE, - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - .gpio_wp = 29, - .deferred = true, - }, - {} /* Terminator */ -}; - -static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -/* ads7846 on SPI */ -static struct regulator_consumer_supply devkit8000_vio_supply[] = { - REGULATOR_SUPPLY("vcc", "spi2.0"), -}; - -static const struct display_timing devkit8000_lcd_videomode = { - .pixelclock = { 0, 40000000, 0 }, - - .hactive = { 0, 800, 0 }, - .hfront_porch = { 0, 1, 0 }, - .hback_porch = { 0, 1, 0 }, - .hsync_len = { 0, 48, 0 }, - - .vactive = { 0, 480, 0 }, - .vfront_porch = { 0, 12, 0 }, - .vback_porch = { 0, 25, 0 }, - .vsync_len = { 0, 3, 0 }, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | - DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, -}; - -static struct panel_dpi_platform_data devkit8000_lcd_pdata = { - .name = "lcd", - .source = "dpi.0", - - .data_lines = 24, - - .display_timing = &devkit8000_lcd_videomode, - - .enable_gpio = -1, /* filled in code */ - .backlight_gpio = -1, -}; - -static struct platform_device devkit8000_lcd_device = { - .name = "panel-dpi", - .id = 0, - .dev.platform_data = &devkit8000_lcd_pdata, -}; - -static struct connector_dvi_platform_data devkit8000_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = 1, -}; - -static struct platform_device devkit8000_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &devkit8000_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data devkit8000_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = -1, /* filled in code */ -}; - -static struct platform_device devkit8000_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &devkit8000_tfp410_pdata, -}; - -static struct connector_atv_platform_data devkit8000_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, - .invert_polarity = false, -}; - -static struct platform_device devkit8000_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &devkit8000_tv_pdata, -}; - -static struct omap_dss_board_info devkit8000_dss_data = { - .default_display_name = "lcd", -}; - -static uint32_t board_keymap[] = { - KEY(0, 0, KEY_1), - KEY(1, 0, KEY_2), - KEY(2, 0, KEY_3), - KEY(0, 1, KEY_4), - KEY(1, 1, KEY_5), - KEY(2, 1, KEY_6), - KEY(3, 1, KEY_F5), - KEY(0, 2, KEY_7), - KEY(1, 2, KEY_8), - KEY(2, 2, KEY_9), - KEY(3, 2, KEY_F6), - KEY(0, 3, KEY_F7), - KEY(1, 3, KEY_0), - KEY(2, 3, KEY_F8), - PERSISTENT_KEY(4, 5), - KEY(4, 4, KEY_VOLUMEUP), - KEY(5, 5, KEY_VOLUMEDOWN), - 0 -}; - -static struct matrix_keymap_data board_map_data = { - .keymap = board_keymap, - .keymap_size = ARRAY_SIZE(board_keymap), -}; - -static struct twl4030_keypad_data devkit8000_kp_data = { - .keymap_data = &board_map_data, - .rows = 6, - .cols = 6, - .rep = 1, -}; - -static struct gpio_led gpio_leds[]; - -static int devkit8000_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap_hsmmc_late_init(mmc); - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - - /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ - devkit8000_lcd_pdata.enable_gpio = gpio + TWL4030_GPIO_MAX + 0; - - /* gpio + 7 is "DVI_PD" (out, active low) */ - devkit8000_tfp410_pdata.power_down_gpio = gpio + 7; - - return 0; -} - -static struct twl4030_gpio_platform_data devkit8000_gpio_data = { - .use_leds = true, - .pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13) - | BIT(15) | BIT(16) | BIT(17), - .setup = devkit8000_twl_gpio_setup, -}; - -static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data devkit8000_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(devkit8000_vmmc1_supply), - .consumer_supplies = devkit8000_vmmc1_supply, -}; - -/* VPLL1 for digital video outputs */ -static struct regulator_init_data devkit8000_vpll1 = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(devkit8000_vpll1_supplies), - .consumer_supplies = devkit8000_vpll1_supplies, -}; - -/* VAUX4 for ads7846 and nubs */ -static struct regulator_init_data devkit8000_vio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(devkit8000_vio_supply), - .consumer_supplies = devkit8000_vio_supply, -}; - -static struct twl4030_platform_data devkit8000_twldata = { - /* platform_data for children goes here */ - .gpio = &devkit8000_gpio_data, - .vmmc1 = &devkit8000_vmmc1, - .vpll1 = &devkit8000_vpll1, - .vio = &devkit8000_vio, - .keypad = &devkit8000_kp_data, -}; - -static int __init devkit8000_i2c_init(void) -{ - omap3_pmic_get_config(&devkit8000_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VDAC); - omap3_pmic_init("tps65930", &devkit8000_twldata); - /* Bus 3 is attached to the DVI port where devices like the pico DLP - * projector don't work reliably with 400kHz */ - omap_register_i2c_bus(3, 400, NULL, 0); - return 0; -} - -static struct gpio_led gpio_leds[] = { - { - .name = "led1", - .default_trigger = "heartbeat", - .gpio = 186, - .active_low = true, - }, - { - .name = "led2", - .default_trigger = "mmc0", - .gpio = 163, - .active_low = true, - }, - { - .name = "ledB", - .default_trigger = "none", - .gpio = 153, - .active_low = true, - }, - { - .name = "led3", - .default_trigger = "none", - .gpio = 164, - .active_low = true, - }, -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, -}; - -static struct gpio_keys_button gpio_buttons[] = { - { - .code = BTN_EXTRA, - .gpio = 26, - .desc = "user", - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data gpio_key_info = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -static struct platform_device keys_gpio = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &gpio_key_info, - }, -}; - -#define OMAP_DM9000_BASE 0x2c000000 - -static struct resource omap_dm9000_resources[] = { - [0] = { - .start = OMAP_DM9000_BASE, - .end = (OMAP_DM9000_BASE + 0x4 - 1), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (OMAP_DM9000_BASE + 0x400), - .end = (OMAP_DM9000_BASE + 0x400 + 0x4 - 1), - .flags = IORESOURCE_MEM, - }, - [2] = { - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, - }, -}; - -static struct dm9000_plat_data omap_dm9000_platdata = { - .flags = DM9000_PLATF_16BITONLY, -}; - -static struct platform_device omap_dm9000_dev = { - .name = "dm9000", - .id = -1, - .num_resources = ARRAY_SIZE(omap_dm9000_resources), - .resource = omap_dm9000_resources, - .dev = { - .platform_data = &omap_dm9000_platdata, - }, -}; - -static void __init omap_dm9000_init(void) -{ - unsigned char *eth_addr = omap_dm9000_platdata.dev_addr; - struct omap_die_id odi; - int ret; - - ret = gpio_request_one(OMAP_DM9000_GPIO_IRQ, GPIOF_IN, "dm9000 irq"); - if (ret < 0) { - printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n", - OMAP_DM9000_GPIO_IRQ); - return; - } - - /* init the mac address using DIE id */ - omap_get_die_id(&odi); - - eth_addr[0] = 0x02; /* locally administered */ - eth_addr[1] = odi.id_1 & 0xff; - eth_addr[2] = (odi.id_0 & 0xff000000) >> 24; - eth_addr[3] = (odi.id_0 & 0x00ff0000) >> 16; - eth_addr[4] = (odi.id_0 & 0x0000ff00) >> 8; - eth_addr[5] = (odi.id_0 & 0x000000ff); -} - -static struct platform_device *devkit8000_devices[] __initdata = { - &leds_gpio, - &keys_gpio, - &omap_dm9000_dev, - &devkit8000_lcd_device, - &devkit8000_tfp410_device, - &devkit8000_dvi_connector_device, - &devkit8000_tv_connector_device, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - /* nCS and IRQ for Devkit8000 ethernet */ - OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE0), - OMAP3_MUX(ETK_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), - - /* McSPI 2*/ - OMAP3_MUX(MCSPI2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI2_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(MCSPI2_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI2_CS0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(MCSPI2_CS1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - - /* PENDOWN GPIO */ - OMAP3_MUX(ETK_D13, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - - /* mUSB */ - OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* USB 1 */ - OMAP3_MUX(ETK_CTL, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT), - OMAP3_MUX(ETK_D8, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D9, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D0, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D2, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D4, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D5, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D6, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D7, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - - /* MMC 1 */ - OMAP3_MUX(SDMMC1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* McBSP 2 */ - OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - - /* I2C 1 */ - OMAP3_MUX(I2C1_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(I2C1_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* I2C 2 */ - OMAP3_MUX(I2C2_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* I2C 3 */ - OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* I2C 4 */ - OMAP3_MUX(I2C4_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(I2C4_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* serial ports */ - OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* DSS */ - OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - - /* expansion port */ - /* McSPI 1 */ - OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - OMAP3_MUX(MCSPI1_CS3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - - /* HDQ */ - OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* McSPI4 */ - OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP), - - /* MMC 2 */ - OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - - /* I2C3 */ - OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - - OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - - /* TPS IRQ */ - OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \ - OMAP_PIN_INPUT_PULLUP), - - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static void __init devkit8000_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); - - omap_dm9000_init(); - - omap_hsmmc_init(mmc); - devkit8000_i2c_init(); - omap_dm9000_resources[2].start = gpio_to_irq(OMAP_DM9000_GPIO_IRQ); - platform_add_devices(devkit8000_devices, - ARRAY_SIZE(devkit8000_devices)); - - omap_display_init(&devkit8000_dss_data); - - omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL); - - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - usbhs_init(&usbhs_bdata); - board_nand_init(devkit8000_nand_partitions, - ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS, - NAND_BUSWIDTH_16, NULL); - omap_twl4030_audio_init("omap3beagle", NULL); - - /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); -} - -MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = devkit8000_init, - .init_late = omap35xx_init_late, - .init_time = omap3_secure_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c deleted file mode 100644 index 6311f4b1ee44..000000000000 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ /dev/null @@ -1,433 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-omap3evm.c - * - * Copyright (C) 2008 Guangzhou EMA-Tech - * - * Modified from mach-omap2/board-omap3evm.c - * - * Initial code: Syed Mohammed Khasim - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/leds.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> - -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/i2c/twl.h> -#include <linux/mmc/host.h> -#include <linux/input/matrix_keypad.h> -#include <linux/spi/spi.h> -#include <linux/interrupt.h> -#include <linux/smsc911x.h> -#include <linux/platform_data/at24.h> -#include <linux/usb/phy.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> - -#include "common.h" -#include "gpmc.h" -#include <linux/platform_data/mtd-nand-omap2.h> -#include <video/omapdss.h> -#include <video/omap-panel-data.h> - -#include <linux/platform_data/spi-omap2-mcspi.h> - -#include "sdram-micron-mt46h32m32lf-6.h" -#include "mux.h" -#include "hsmmc.h" -#include "common-board-devices.h" - -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) -#include "gpmc-smsc911x.h" - -#define OMAP3STALKER_ETHR_START 0x2c000000 -#define OMAP3STALKER_ETHR_SIZE 1024 -#define OMAP3STALKER_ETHR_GPIO_IRQ 19 -#define OMAP3STALKER_SMC911X_CS 5 - -static struct omap_smsc911x_platform_data smsc911x_cfg = { - .cs = OMAP3STALKER_SMC911X_CS, - .gpio_irq = OMAP3STALKER_ETHR_GPIO_IRQ, - .gpio_reset = -EINVAL, - .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS), -}; - -static inline void __init omap3stalker_init_eth(void) -{ - omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP); - gpmc_smsc911x_init(&smsc911x_cfg); -} - -#else -static inline void __init omap3stalker_init_eth(void) -{ - return; -} -#endif - -/* - * OMAP3 DSS control signals - */ - -#define DSS_ENABLE_GPIO 199 -#define LCD_PANEL_BKLIGHT_GPIO 210 -#define ENABLE_VPLL2_DEV_GRP 0xE0 - -static void __init omap3_stalker_display_init(void) -{ - return; -} -static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = -1, -}; - -static struct platform_device omap3stalker_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &omap3stalker_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = DSS_ENABLE_GPIO, -}; - -static struct platform_device omap3stalker_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &omap3stalker_tfp410_pdata, -}; - -static struct connector_atv_platform_data omap3stalker_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE, - .invert_polarity = false, -}; - -static struct platform_device omap3stalker_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &omap3stalker_tv_pdata, -}; - -static struct omap_dss_board_info omap3_stalker_dss_data = { - .default_display_name = "dvi", -}; - -static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply omap3stalker_vsim_supply[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data omap3stalker_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vmmc1_supply), - .consumer_supplies = omap3stalker_vmmc1_supply, -}; - -/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ -static struct regulator_init_data omap3stalker_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vsim_supply), - .consumer_supplies = omap3stalker_vsim_supply, -}; - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = 23, - .deferred = true, - }, - {} /* Terminator */ -}; - -static struct gpio_keys_button gpio_buttons[] = { - { - .code = BTN_EXTRA, - .gpio = 18, - .desc = "user", - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data gpio_key_info = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -static struct platform_device keys_gpio = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &gpio_key_info, - }, -}; - -static struct gpio_led gpio_leds[] = { - { - .name = "stalker:D8:usr0", - .default_trigger = "default-on", - .gpio = 126, - }, - { - .name = "stalker:D9:usr1", - .default_trigger = "default-on", - .gpio = 127, - }, - { - .name = "stalker:D3:mmc0", - .gpio = -EINVAL, /* gets replaced */ - .active_low = true, - .default_trigger = "mmc0", - }, - { - .name = "stalker:D4:heartbeat", - .gpio = -EINVAL, /* gets replaced */ - .active_low = true, - .default_trigger = "heartbeat", - }, -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, -}; - -static int -omap3stalker_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap_hsmmc_late_init(mmc); - - /* - * Most GPIOs are for USB OTG. Some are mostly sent to - * the P2 connector; notably LEDA for the LCD backlight. - */ - - /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ - gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, - "EN_LCD_BKL"); - - /* gpio + 7 == DVI Enable */ - gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); - - /* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - /* GPIO + 13 == ledsync (out, heartbeat) */ - gpio_leds[3].gpio = gpio + 13; - - platform_device_register(&leds_gpio); - return 0; -} - -static struct twl4030_gpio_platform_data omap3stalker_gpio_data = { - .use_leds = true, - .setup = omap3stalker_twl_gpio_setup, -}; - -static uint32_t board_keymap[] = { - KEY(0, 0, KEY_LEFT), - KEY(0, 1, KEY_DOWN), - KEY(0, 2, KEY_ENTER), - KEY(0, 3, KEY_M), - - KEY(1, 0, KEY_RIGHT), - KEY(1, 1, KEY_UP), - KEY(1, 2, KEY_I), - KEY(1, 3, KEY_N), - - KEY(2, 0, KEY_A), - KEY(2, 1, KEY_E), - KEY(2, 2, KEY_J), - KEY(2, 3, KEY_O), - - KEY(3, 0, KEY_B), - KEY(3, 1, KEY_F), - KEY(3, 2, KEY_K), - KEY(3, 3, KEY_P) -}; - -static struct matrix_keymap_data board_map_data = { - .keymap = board_keymap, - .keymap_size = ARRAY_SIZE(board_keymap), -}; - -static struct twl4030_keypad_data omap3stalker_kp_data = { - .keymap_data = &board_map_data, - .rows = 4, - .cols = 4, - .rep = 1, -}; - -static struct twl4030_platform_data omap3stalker_twldata = { - /* platform_data for children goes here */ - .keypad = &omap3stalker_kp_data, - .gpio = &omap3stalker_gpio_data, - .vmmc1 = &omap3stalker_vmmc1, - .vsim = &omap3stalker_vsim, -}; - -static struct at24_platform_data fram_info = { - .byte_len = (64 * 1024) / 8, - .page_size = 8192, - .flags = AT24_FLAG_ADDR16 | AT24_FLAG_IRUGO, -}; - -static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = { - { - I2C_BOARD_INFO("24c64", 0x50), - .flags = I2C_CLIENT_WAKE, - .platform_data = &fram_info, - }, -}; - -static int __init omap3_stalker_i2c_init(void) -{ - omap3_pmic_get_config(&omap3stalker_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | - TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - - omap3stalker_twldata.vdac->constraints.apply_uV = true; - omap3stalker_twldata.vpll2->constraints.apply_uV = true; - omap3stalker_twldata.vpll2->constraints.name = "VDVI"; - - omap3_pmic_init("twl4030", &omap3stalker_twldata); - omap_register_i2c_bus(2, 400, NULL, 0); - omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3, - ARRAY_SIZE(omap3stalker_i2c_boardinfo3)); - return 0; -} - -#define OMAP3_STALKER_TS_GPIO 175 - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 2, - .reset_gpio = 21, - .vcc_gpio = -EINVAL, - }, -}; - -static struct platform_device *omap3_stalker_devices[] __initdata = { - &keys_gpio, - &omap3stalker_tfp410_device, - &omap3stalker_dvi_connector_device, - &omap3stalker_tv_connector_device, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), - OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), - {.reg_offset = OMAP_MUX_TERMINATOR}, -}; -#endif - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -static void __init omap3_stalker_init(void) -{ - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); - - omap_mux_init_gpio(23, OMAP_PIN_INPUT); - omap_hsmmc_init(mmc); - - omap3_stalker_i2c_init(); - - platform_add_devices(omap3_stalker_devices, - ARRAY_SIZE(omap3_stalker_devices)); - - omap_display_init(&omap3_stalker_dss_data); - - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL); - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); - omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); - - omap_mux_init_gpio(21, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP); - - omap3stalker_init_eth(); - omap3_stalker_display_init(); -/* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT); -} - -MACHINE_START(SBC3530, "OMAP3 STALKER") - /* Maintainer: Jason Lam -lzg@ema-tech.com */ - .atag_offset = 0x100, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = omap3_stalker_init, - .init_late = omap35xx_init_late, - .init_time = omap3_secure_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c deleted file mode 100644 index a01993e5500f..000000000000 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ /dev/null @@ -1,395 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-omap3touchbook.c - * - * Copyright (C) 2009 Always Innovating - * - * Modified from mach-omap2/board-omap3beagleboard.c - * - * Initial code: Grégoire Gentil, Tim Yamin - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/leds.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/nand.h> -#include <linux/mmc/host.h> -#include <linux/usb/phy.h> - -#include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/spi/spi.h> - -#include <linux/spi/ads7846.h> - -#include <linux/regulator/machine.h> -#include <linux/i2c/twl.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> -#include <asm/system_info.h> - -#include "common.h" -#include "gpmc.h" -#include <linux/platform_data/mtd-nand-omap2.h> - -#include "mux.h" -#include "hsmmc.h" -#include "board-flash.h" -#include "common-board-devices.h" - -#include <asm/setup.h> - -#define OMAP3_AC_GPIO 136 -#define OMAP3_TS_GPIO 162 -#define TB_BL_PWM_TIMER 9 -#define TB_KILL_POWER_GPIO 168 - -#define NAND_CS 0 - -static unsigned long touchbook_revision; - -static struct mtd_partition omap3touchbook_nand_partitions[] = { - /* All the partition sizes are listed in terms of NAND block size */ - { - .name = "X-Loader", - .offset = 0, - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 15 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot Env", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ - .size = 1 * NAND_BLOCK_SIZE, - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ - .size = 32 * NAND_BLOCK_SIZE, - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ - .size = MTDPART_SIZ_FULL, - }, -}; - -#include "sdram-micron-mt46h32m32lf-6.h" - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - .gpio_wp = 29, - .deferred = true, - }, - {} /* Terminator */ -}; - -static struct regulator_consumer_supply touchbook_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply touchbook_vsim_supply[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), -}; - -static struct gpio_led gpio_leds[]; - -static int touchbook_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap_hsmmc_late_init(mmc); - - /* REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"); - - /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ - gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, - "nEN_USB_PWR"); - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - - return 0; -} - -static struct twl4030_gpio_platform_data touchbook_gpio_data = { - .use_leds = true, - .pullups = BIT(1), - .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) - | BIT(15) | BIT(16) | BIT(17), - .setup = touchbook_twl_gpio_setup, -}; - -static struct regulator_consumer_supply touchbook_vdac_supply[] = { -{ - .supply = "vdac", -}, -}; - -static struct regulator_consumer_supply touchbook_vdvi_supply[] = { -{ - .supply = "vdvi", -}, -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data touchbook_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(touchbook_vmmc1_supply), - .consumer_supplies = touchbook_vmmc1_supply, -}; - -/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ -static struct regulator_init_data touchbook_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(touchbook_vsim_supply), - .consumer_supplies = touchbook_vsim_supply, -}; - -static struct twl4030_platform_data touchbook_twldata = { - /* platform_data for children goes here */ - .gpio = &touchbook_gpio_data, - .vmmc1 = &touchbook_vmmc1, - .vsim = &touchbook_vsim, -}; - -static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("bq27200", 0x55), - }, -}; - -static int __init omap3_touchbook_i2c_init(void) -{ - /* Standard TouchBook bus */ - omap3_pmic_get_config(&touchbook_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - - touchbook_twldata.vdac->num_consumer_supplies = - ARRAY_SIZE(touchbook_vdac_supply); - touchbook_twldata.vdac->consumer_supplies = touchbook_vdac_supply; - - touchbook_twldata.vpll2->constraints.name = "VDVI"; - touchbook_twldata.vpll2->num_consumer_supplies = - ARRAY_SIZE(touchbook_vdvi_supply); - touchbook_twldata.vpll2->consumer_supplies = touchbook_vdvi_supply; - - omap3_pmic_init("twl4030", &touchbook_twldata); - /* Additional TouchBook bus */ - omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, - ARRAY_SIZE(touchBook_i2c_boardinfo)); - - return 0; -} - -static struct ads7846_platform_data ads7846_pdata = { - .x_min = 100, - .y_min = 265, - .x_max = 3950, - .y_max = 3750, - .x_plate_ohms = 40, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 5, - .debounce_rep = 1, - .gpio_pendown = OMAP3_TS_GPIO, - .keep_vref_on = 1, -}; - -static struct gpio_led gpio_leds[] = { - { - .name = "touchbook::usr0", - .default_trigger = "heartbeat", - .gpio = 150, - }, - { - .name = "touchbook::usr1", - .default_trigger = "mmc0", - .gpio = 149, - }, - { - .name = "touchbook::pmu_stat", - .gpio = -EINVAL, /* gets replaced */ - .active_low = true, - }, -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, -}; - -static struct gpio_keys_button gpio_buttons[] = { - { - .code = BTN_EXTRA, - .gpio = 7, - .desc = "user", - .wakeup = 1, - }, - { - .code = KEY_POWER, - .gpio = 183, - .desc = "power", - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data gpio_key_info = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -static struct platform_device keys_gpio = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &gpio_key_info, - }, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 2, - .reset_gpio = 147, - .vcc_gpio = -EINVAL, - }, -}; - -static struct platform_device *omap3_touchbook_devices[] __initdata = { - &leds_gpio, - &keys_gpio, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -static void omap3_touchbook_poweroff(void) -{ - int pwr_off = TB_KILL_POWER_GPIO; - - if (gpio_request_one(pwr_off, GPIOF_OUT_INIT_LOW, "DVI reset") < 0) - printk(KERN_ERR "Unable to get kill power GPIO\n"); -} - -static int __init early_touchbook_revision(char *p) -{ - if (!p) - return 0; - - return kstrtoul(p, 10, &touchbook_revision); -} -early_param("tbr", early_touchbook_revision); - -static void __init omap3_touchbook_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - - pm_power_off = omap3_touchbook_poweroff; - - if (system_rev >= 0x20 && system_rev <= 0x34301000) { - omap_mux_init_gpio(23, OMAP_PIN_INPUT); - mmc[0].gpio_wp = 23; - } else { - omap_mux_init_gpio(29, OMAP_PIN_INPUT); - } - omap_hsmmc_init(mmc); - - omap3_touchbook_i2c_init(); - platform_add_devices(omap3_touchbook_devices, - ARRAY_SIZE(omap3_touchbook_devices)); - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); - - omap_mux_init_gpio(170, OMAP_PIN_INPUT); - /* REVISIT leave DVI powered down until it's needed ... */ - gpio_request_one(176, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); - - /* Touchscreen and accelerometer */ - omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); - board_nand_init(omap3touchbook_nand_partitions, - ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS, - NAND_BUSWIDTH_16, NULL); - - /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); -} - -MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") - /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */ - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3430_init_early, - .init_irq = omap3_init_irq, - .init_machine = omap3_touchbook_init, - .init_late = omap3430_init_late, - .init_time = omap3_secure_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 6124db5c37ae..a699d7169307 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -23,6 +23,9 @@ #include <linux/clk-provider.h> #include <linux/io.h> #include <linux/bitops.h> +#include <linux/regmap.h> +#include <linux/of_address.h> +#include <linux/bootmem.h> #include <asm/cpu.h> #include <trace/events/power.h> @@ -72,30 +75,110 @@ struct ti_clk_features ti_clk_features; static bool clkdm_control = true; static LIST_HEAD(clk_hw_omap_clocks); -void __iomem *clk_memmaps[CLK_MAX_MEMMAPS]; + +struct clk_iomap { + struct regmap *regmap; + void __iomem *mem; +}; + +static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS]; + +static void clk_memmap_writel(u32 val, void __iomem *reg) +{ + struct clk_omap_reg *r = (struct clk_omap_reg *)® + struct clk_iomap *io = clk_memmaps[r->index]; + + if (io->regmap) + regmap_write(io->regmap, r->offset, val); + else + writel_relaxed(val, io->mem + r->offset); +} + +static u32 clk_memmap_readl(void __iomem *reg) +{ + u32 val; + struct clk_omap_reg *r = (struct clk_omap_reg *)® + struct clk_iomap *io = clk_memmaps[r->index]; + + if (io->regmap) + regmap_read(io->regmap, r->offset, &val); + else + val = readl_relaxed(io->mem + r->offset); + + return val; +} void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg) { - if (clk->flags & MEMMAP_ADDRESSING) { - struct clk_omap_reg *r = (struct clk_omap_reg *)® - writel_relaxed(val, clk_memmaps[r->index] + r->offset); - } else { + if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING))) writel_relaxed(val, reg); - } + else + clk_memmap_writel(val, reg); } u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg) { - u32 val; + if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING))) + return readl_relaxed(reg); + else + return clk_memmap_readl(reg); +} - if (clk->flags & MEMMAP_ADDRESSING) { - struct clk_omap_reg *r = (struct clk_omap_reg *)® - val = readl_relaxed(clk_memmaps[r->index] + r->offset); - } else { - val = readl_relaxed(reg); - } +static struct ti_clk_ll_ops omap_clk_ll_ops = { + .clk_readl = clk_memmap_readl, + .clk_writel = clk_memmap_writel, +}; - return val; +/** + * omap2_clk_provider_init - initialize a clock provider + * @match_table: DT device table to match for devices to init + * @np: device node pointer for the this clock provider + * @index: index for the clock provider + + @syscon: syscon regmap pointer + * @mem: iomem pointer for the clock provider memory area, only used if + * syscon is not provided + * + * Initializes a clock provider module (CM/PRM etc.), registering + * the memory mapping at specified index and initializing the + * low level driver infrastructure. Returns 0 in success. + */ +int __init omap2_clk_provider_init(struct device_node *np, int index, + struct regmap *syscon, void __iomem *mem) +{ + struct clk_iomap *io; + + ti_clk_ll_ops = &omap_clk_ll_ops; + + io = kzalloc(sizeof(*io), GFP_KERNEL); + + io->regmap = syscon; + io->mem = mem; + + clk_memmaps[index] = io; + + ti_dt_clk_init_provider(np, index); + + return 0; +} + +/** + * omap2_clk_legacy_provider_init - initialize a legacy clock provider + * @index: index for the clock provider + * @mem: iomem pointer for the clock provider memory area + * + * Initializes a legacy clock provider memory mapping. + */ +void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem) +{ + struct clk_iomap *io; + + ti_clk_ll_ops = &omap_clk_ll_ops; + + io = memblock_virt_alloc(sizeof(*io), 0); + + io->mem = mem; + + clk_memmaps[index] = io; } /* diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index a56742f96000..652ed0ab86ec 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -271,10 +271,14 @@ extern const struct clksel_rate div_1_3_rates[]; extern const struct clksel_rate div_1_4_rates[]; extern const struct clksel_rate div31_1to31_rates[]; -extern void __iomem *clk_memmaps[]; - extern int omap2_clkops_enable_clkdm(struct clk_hw *hw); extern void omap2_clkops_disable_clkdm(struct clk_hw *hw); +struct regmap; + +int __init omap2_clk_provider_init(struct device_node *np, int index, + struct regmap *syscon, void __iomem *mem); +void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem); + void __init ti_clk_init_features(void); #endif diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index 6222e87a79b6..1fe3e6b833d2 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -70,6 +70,8 @@ int omap_cm_module_enable(u8 mode, u8 part, u16 inst, u16 clkctrl_offs); int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs); extern int cm_register(struct cm_ll_data *cld); extern int cm_unregister(struct cm_ll_data *cld); +int omap_cm_init(void); +int omap2_cm_base_init(void); # endif diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c index ef62ac9dcd05..3e5fd3587eb1 100644 --- a/arch/arm/mach-omap2/cm2xxx.c +++ b/arch/arm/mach-omap2/cm2xxx.c @@ -393,7 +393,7 @@ static struct cm_ll_data omap2xxx_cm_ll_data = { .wait_module_ready = &omap2xxx_cm_wait_module_ready, }; -int __init omap2xxx_cm_init(void) +int __init omap2xxx_cm_init(const struct omap_prcm_init_data *data) { return cm_register(&omap2xxx_cm_ll_data); } diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h index 83b6c597b0e1..7b8c79c0ce27 100644 --- a/arch/arm/mach-omap2/cm2xxx.h +++ b/arch/arm/mach-omap2/cm2xxx.h @@ -63,7 +63,7 @@ extern u32 omap2xxx_cm_get_core_pll_config(void); extern void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm); -extern int __init omap2xxx_cm_init(void); +int __init omap2xxx_cm_init(const struct omap_prcm_init_data *data); #endif diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index cc5aac784278..7b181f929525 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -352,7 +352,7 @@ static struct cm_ll_data am33xx_cm_ll_data = { .module_disable = &am33xx_cm_module_disable, }; -int __init am33xx_cm_init(void) +int __init am33xx_cm_init(const struct omap_prcm_init_data *data) { return cm_register(&am33xx_cm_ll_data); } diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h index 046b4b2bc9d9..a91f7d282455 100644 --- a/arch/arm/mach-omap2/cm33xx.h +++ b/arch/arm/mach-omap2/cm33xx.h @@ -19,6 +19,7 @@ #include "cm.h" #include "cm-regbits-33xx.h" +#include "prcm-common.h" /* CM base address */ #define AM33XX_CM_BASE 0x44e00000 @@ -374,6 +375,6 @@ #ifndef __ASSEMBLER__ -int am33xx_cm_init(void); +int am33xx_cm_init(const struct omap_prcm_init_data *data); #endif /* ASSEMBLER */ #endif diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c index ebead8f035f9..187fa4386718 100644 --- a/arch/arm/mach-omap2/cm3xxx.c +++ b/arch/arm/mach-omap2/cm3xxx.c @@ -671,8 +671,9 @@ static struct cm_ll_data omap3xxx_cm_ll_data = { .wait_module_ready = &omap3xxx_cm_wait_module_ready, }; -int __init omap3xxx_cm_init(void) +int __init omap3xxx_cm_init(const struct omap_prcm_init_data *data) { + omap2_clk_legacy_provider_init(TI_CLKM_CM, cm_base + OMAP3430_IVA2_MOD); return cm_register(&omap3xxx_cm_ll_data); } diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h index 734a8581c0c4..bc444e2080a1 100644 --- a/arch/arm/mach-omap2/cm3xxx.h +++ b/arch/arm/mach-omap2/cm3xxx.h @@ -72,7 +72,7 @@ extern void omap3_cm_save_context(void); extern void omap3_cm_restore_context(void); extern void omap3_cm_save_scratchpad_contents(u32 *ptr); -extern int __init omap3xxx_cm_init(void); +int __init omap3xxx_cm_init(const struct omap_prcm_init_data *data); #endif diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h index 728d06a4af19..309a4c913448 100644 --- a/arch/arm/mach-omap2/cm44xx.h +++ b/arch/arm/mach-omap2/cm44xx.h @@ -23,7 +23,6 @@ #define OMAP4_CM_CLKSTCTRL 0x0000 #define OMAP4_CM_STATICDEP 0x0004 -void omap_cm_base_init(void); -int omap4_cm_init(void); +int omap4_cm_init(const struct omap_prcm_init_data *data); #endif diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c index 8fe02fcedc48..23e8bcec34e3 100644 --- a/arch/arm/mach-omap2/cm_common.c +++ b/arch/arm/mach-omap2/cm_common.c @@ -15,10 +15,14 @@ #include <linux/init.h> #include <linux/errno.h> #include <linux/bug.h> +#include <linux/of.h> +#include <linux/of_address.h> #include "cm2xxx.h" #include "cm3xxx.h" +#include "cm33xx.h" #include "cm44xx.h" +#include "clock.h" /* * cm_ll_data: function pointers to SoC-specific implementations of @@ -33,6 +37,9 @@ void __iomem *cm_base; /* cm2_base: base virtual address of the CM2 IP block (OMAP44xx only) */ void __iomem *cm2_base; +#define CM_NO_CLOCKS 0x1 +#define CM_SINGLE_INSTANCE 0x2 + /** * omap2_set_globals_cm - set the CM/CM2 base addresses (for early use) * @cm: CM base virtual address @@ -212,3 +219,152 @@ int cm_unregister(struct cm_ll_data *cld) return 0; } + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) +static struct omap_prcm_init_data cm_data __initdata = { + .index = TI_CLKM_CM, + .init = omap4_cm_init, +}; + +static struct omap_prcm_init_data cm2_data __initdata = { + .index = TI_CLKM_CM2, + .init = omap4_cm_init, +}; +#endif + +#ifdef CONFIG_ARCH_OMAP2 +static struct omap_prcm_init_data omap2_prcm_data __initdata = { + .index = TI_CLKM_CM, + .init = omap2xxx_cm_init, + .flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE, +}; +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static struct omap_prcm_init_data omap3_cm_data __initdata = { + .index = TI_CLKM_CM, + .init = omap3xxx_cm_init, + .flags = CM_SINGLE_INSTANCE, + + /* + * IVA2 offset is a negative value, must offset the cm_base address + * by this to get it to positive side on the iomap + */ + .offset = -OMAP3430_IVA2_MOD, +}; +#endif + +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_TI81XX) +static struct omap_prcm_init_data am3_prcm_data __initdata = { + .index = TI_CLKM_CM, + .flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE, + .init = am33xx_cm_init, +}; +#endif + +#ifdef CONFIG_SOC_AM43XX +static struct omap_prcm_init_data am4_prcm_data __initdata = { + .index = TI_CLKM_CM, + .flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE, + .init = omap4_cm_init, +}; +#endif + +static const struct of_device_id omap_cm_dt_match_table[] __initconst = { +#ifdef CONFIG_ARCH_OMAP2 + { .compatible = "ti,omap2-prcm", .data = &omap2_prcm_data }, +#endif +#ifdef CONFIG_ARCH_OMAP3 + { .compatible = "ti,omap3-cm", .data = &omap3_cm_data }, +#endif +#ifdef CONFIG_ARCH_OMAP4 + { .compatible = "ti,omap4-cm1", .data = &cm_data }, + { .compatible = "ti,omap4-cm2", .data = &cm2_data }, +#endif +#ifdef CONFIG_SOC_OMAP5 + { .compatible = "ti,omap5-cm-core-aon", .data = &cm_data }, + { .compatible = "ti,omap5-cm-core", .data = &cm2_data }, +#endif +#ifdef CONFIG_SOC_DRA7XX + { .compatible = "ti,dra7-cm-core-aon", .data = &cm_data }, + { .compatible = "ti,dra7-cm-core", .data = &cm2_data }, +#endif +#ifdef CONFIG_SOC_AM33XX + { .compatible = "ti,am3-prcm", .data = &am3_prcm_data }, +#endif +#ifdef CONFIG_SOC_AM43XX + { .compatible = "ti,am4-prcm", .data = &am4_prcm_data }, +#endif +#ifdef CONFIG_SOC_TI81XX + { .compatible = "ti,dm814-prcm", .data = &am3_prcm_data }, + { .compatible = "ti,dm816-prcm", .data = &am3_prcm_data }, +#endif + { } +}; + +/** + * omap2_cm_base_init - initialize iomappings for the CM drivers + * + * Detects and initializes the iomappings for the CM driver, based + * on the DT data. Returns 0 in success, negative error value + * otherwise. + */ +int __init omap2_cm_base_init(void) +{ + struct device_node *np; + const struct of_device_id *match; + struct omap_prcm_init_data *data; + void __iomem *mem; + + for_each_matching_node_and_match(np, omap_cm_dt_match_table, &match) { + data = (struct omap_prcm_init_data *)match->data; + + mem = of_iomap(np, 0); + if (!mem) + return -ENOMEM; + + if (data->index == TI_CLKM_CM) + cm_base = mem + data->offset; + + if (data->index == TI_CLKM_CM2) + cm2_base = mem + data->offset; + + data->mem = mem; + + data->np = np; + + if (data->init && (data->flags & CM_SINGLE_INSTANCE || + (cm_base && cm2_base))) + data->init(data); + } + + return 0; +} + +/** + * omap_cm_init - low level init for the CM drivers + * + * Initializes the low level clock infrastructure for CM drivers. + * Returns 0 in success, negative error value in failure. + */ +int __init omap_cm_init(void) +{ + struct device_node *np; + const struct of_device_id *match; + const struct omap_prcm_init_data *data; + int ret; + + for_each_matching_node_and_match(np, omap_cm_dt_match_table, &match) { + data = match->data; + + if (data->flags & CM_NO_CLOCKS) + continue; + + ret = omap2_clk_provider_init(np, data->index, NULL, data->mem); + if (ret) + return ret; + } + + return 0; +} diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 95a8cff66aff..2c0e07ed6b99 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -63,7 +63,7 @@ static void __iomem *_cm_bases[OMAP4_MAX_PRCM_PARTITIONS]; * Populates the base addresses of the _cm_bases * array used for read/write of cm module registers. */ -void omap_cm_base_init(void) +static void omap_cm_base_init(void) { _cm_bases[OMAP4430_PRM_PARTITION] = prm_base; _cm_bases[OMAP4430_CM1_PARTITION] = cm_base; @@ -514,8 +514,10 @@ static struct cm_ll_data omap4xxx_cm_ll_data = { .module_disable = &omap4_cminst_module_disable, }; -int __init omap4_cm_init(void) +int __init omap4_cm_init(const struct omap_prcm_init_data *data) { + omap_cm_base_init(); + return cm_register(&omap4xxx_cm_ll_data); } diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 484cdadfb187..eae6a0e87c90 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -30,5 +30,4 @@ int __weak omap_secure_ram_reserve_memblock(void) void __init omap_reserve(void) { omap_secure_ram_reserve_memblock(); - omap_barrier_reserve_memblock(); } diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 46e24581d624..cf3cf22ecd42 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -200,9 +200,6 @@ void __init omap4_map_io(void); void __init omap5_map_io(void); void __init ti81xx_map_io(void); -/* omap_barriers_init() is OMAP4 only */ -void omap_barriers_init(void); - /** * omap_test_timeout - busy-loop, testing a condition * @cond: condition to test until it evaluates to true diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index da041b4ab29c..af95a624fe71 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -14,6 +14,9 @@ #include <linux/kernel.h> #include <linux/io.h> +#include <linux/of_address.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> #include "soc.h" #include "iomap.h" @@ -25,13 +28,15 @@ #include "sdrc.h" #include "pm.h" #include "control.h" +#include "clock.h" /* Used by omap3_ctrl_save_padconf() */ #define START_PADCONF_SAVE 0x2 #define PADCONF_SAVE_DONE 0x1 static void __iomem *omap2_ctrl_base; -static void __iomem *omap4_ctrl_pad_base; +static s16 omap2_ctrl_offset; +static struct regmap *omap2_ctrl_syscon; #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) struct omap3_scratchpad { @@ -133,66 +138,79 @@ struct omap3_control_regs { static struct omap3_control_regs control_context; #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */ -#define OMAP_CTRL_REGADDR(reg) (omap2_ctrl_base + (reg)) -#define OMAP4_CTRL_PAD_REGADDR(reg) (omap4_ctrl_pad_base + (reg)) - -void __init omap2_set_globals_control(void __iomem *ctrl, - void __iomem *ctrl_pad) +void __init omap2_set_globals_control(void __iomem *ctrl) { omap2_ctrl_base = ctrl; - omap4_ctrl_pad_base = ctrl_pad; -} - -void __iomem *omap_ctrl_base_get(void) -{ - return omap2_ctrl_base; } u8 omap_ctrl_readb(u16 offset) { - return readb_relaxed(OMAP_CTRL_REGADDR(offset)); + u32 val; + u8 byte_offset = offset & 0x3; + + val = omap_ctrl_readl(offset); + + return (val >> (byte_offset * 8)) & 0xff; } u16 omap_ctrl_readw(u16 offset) { - return readw_relaxed(OMAP_CTRL_REGADDR(offset)); + u32 val; + u16 byte_offset = offset & 0x2; + + val = omap_ctrl_readl(offset); + + return (val >> (byte_offset * 8)) & 0xffff; } u32 omap_ctrl_readl(u16 offset) { - return readl_relaxed(OMAP_CTRL_REGADDR(offset)); + u32 val; + + offset &= 0xfffc; + if (!omap2_ctrl_syscon) + val = readl_relaxed(omap2_ctrl_base + offset); + else + regmap_read(omap2_ctrl_syscon, omap2_ctrl_offset + offset, + &val); + + return val; } void omap_ctrl_writeb(u8 val, u16 offset) { - writeb_relaxed(val, OMAP_CTRL_REGADDR(offset)); + u32 tmp; + u8 byte_offset = offset & 0x3; + + tmp = omap_ctrl_readl(offset); + + tmp &= 0xffffffff ^ (0xff << (byte_offset * 8)); + tmp |= val << (byte_offset * 8); + + omap_ctrl_writel(tmp, offset); } void omap_ctrl_writew(u16 val, u16 offset) { - writew_relaxed(val, OMAP_CTRL_REGADDR(offset)); -} + u32 tmp; + u8 byte_offset = offset & 0x2; -void omap_ctrl_writel(u32 val, u16 offset) -{ - writel_relaxed(val, OMAP_CTRL_REGADDR(offset)); -} + tmp = omap_ctrl_readl(offset); -/* - * On OMAP4 control pad are not addressable from control - * core base. So the common omap_ctrl_read/write APIs breaks - * Hence export separate APIs to manage the omap4 pad control - * registers. This APIs will work only for OMAP4 - */ + tmp &= 0xffffffff ^ (0xffff << (byte_offset * 8)); + tmp |= val << (byte_offset * 8); -u32 omap4_ctrl_pad_readl(u16 offset) -{ - return readl_relaxed(OMAP4_CTRL_PAD_REGADDR(offset)); + omap_ctrl_writel(tmp, offset); } -void omap4_ctrl_pad_writel(u32 val, u16 offset) +void omap_ctrl_writel(u32 val, u16 offset) { - writel_relaxed(val, OMAP4_CTRL_PAD_REGADDR(offset)); + offset &= 0xfffc; + if (!omap2_ctrl_syscon) + writel_relaxed(val, omap2_ctrl_base + offset); + else + regmap_write(omap2_ctrl_syscon, omap2_ctrl_offset + offset, + val); } #ifdef CONFIG_ARCH_OMAP3 @@ -611,3 +629,120 @@ void __init omap3_ctrl_init(void) omap3_ctrl_setup_d2d_padconf(); } #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */ + +struct control_init_data { + int index; + s16 offset; +}; + +static struct control_init_data ctrl_data = { + .index = TI_CLKM_CTRL, +}; + +static const struct control_init_data omap2_ctrl_data = { + .index = TI_CLKM_CTRL, + .offset = -OMAP2_CONTROL_GENERAL, +}; + +static const struct of_device_id omap_scrm_dt_match_table[] = { + { .compatible = "ti,am3-scm", .data = &ctrl_data }, + { .compatible = "ti,am4-scm", .data = &ctrl_data }, + { .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data }, + { .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data }, + { .compatible = "ti,dm816-scrm", .data = &ctrl_data }, + { .compatible = "ti,omap4-scm-core", .data = &ctrl_data }, + { .compatible = "ti,omap5-scm-core", .data = &ctrl_data }, + { .compatible = "ti,dra7-scm-core", .data = &ctrl_data }, + { } +}; + +/** + * omap2_control_base_init - initialize iomappings for the control driver + * + * Detects and initializes the iomappings for the control driver, based + * on the DT data. Returns 0 in success, negative error value + * otherwise. + */ +int __init omap2_control_base_init(void) +{ + struct device_node *np; + const struct of_device_id *match; + struct control_init_data *data; + + for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) { + data = (struct control_init_data *)match->data; + + omap2_ctrl_base = of_iomap(np, 0); + if (!omap2_ctrl_base) + return -ENOMEM; + + omap2_ctrl_offset = data->offset; + } + + return 0; +} + +/** + * omap_control_init - low level init for the control driver + * + * Initializes the low level clock infrastructure for control driver. + * Returns 0 in success, negative error value in failure. + */ +int __init omap_control_init(void) +{ + struct device_node *np, *scm_conf; + const struct of_device_id *match; + const struct omap_prcm_init_data *data; + int ret; + struct regmap *syscon; + + for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) { + data = match->data; + + /* + * Check if we have scm_conf node, if yes, use this to + * access clock registers. + */ + scm_conf = of_get_child_by_name(np, "scm_conf"); + + if (scm_conf) { + syscon = syscon_node_to_regmap(scm_conf); + + if (IS_ERR(syscon)) + return PTR_ERR(syscon); + + omap2_ctrl_syscon = syscon; + + if (of_get_child_by_name(scm_conf, "clocks")) { + ret = omap2_clk_provider_init(scm_conf, + data->index, + syscon, NULL); + if (ret) + return ret; + } + + iounmap(omap2_ctrl_base); + omap2_ctrl_base = NULL; + } else { + /* No scm_conf found, direct access */ + ret = omap2_clk_provider_init(np, data->index, NULL, + omap2_ctrl_base); + if (ret) + return ret; + } + } + + return 0; +} + +/** + * omap3_control_legacy_iomap_init - legacy iomap init for clock providers + * + * Legacy iomap init for clock provider. Needed only by legacy boot mode, + * where the base addresses are not parsed from DT, but still required + * by the clock driver to be setup properly. + */ +void __init omap3_control_legacy_iomap_init(void) +{ + omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap2_ctrl_base); +} diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index b8a487181210..80d2b7d8e36e 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -440,15 +440,12 @@ #ifndef __ASSEMBLY__ #ifdef CONFIG_ARCH_OMAP2PLUS -extern void __iomem *omap_ctrl_base_get(void); extern u8 omap_ctrl_readb(u16 offset); extern u16 omap_ctrl_readw(u16 offset); extern u32 omap_ctrl_readl(u16 offset); -extern u32 omap4_ctrl_pad_readl(u16 offset); extern void omap_ctrl_writeb(u8 val, u16 offset); extern void omap_ctrl_writew(u16 val, u16 offset); extern void omap_ctrl_writel(u32 val, u16 offset); -extern void omap4_ctrl_pad_writel(u32 val, u16 offset); extern void omap3_save_scratchpad_contents(void); extern void omap3_clear_scratchpad_contents(void); @@ -464,10 +461,11 @@ extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode); extern void omap3630_ctrl_disable_rta(void); extern int omap3_ctrl_save_padconf(void); void omap3_ctrl_init(void); -extern void omap2_set_globals_control(void __iomem *ctrl, - void __iomem *ctrl_pad); +int omap2_control_base_init(void); +int omap_control_init(void); +void omap2_set_globals_control(void __iomem *ctrl); +void __init omap3_control_legacy_iomap_init(void); #else -#define omap_ctrl_base_get() 0 #define omap_ctrl_readb(x) 0 #define omap_ctrl_readw(x) 0 #define omap_ctrl_readl(x) 0 diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index 01e398a868bc..4b8e9f4d59ea 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -14,10 +14,9 @@ #include <linux/cpuidle.h> #include <linux/cpu_pm.h> #include <linux/export.h> -#include <linux/clockchips.h> +#include <linux/tick.h> #include <asm/cpuidle.h> -#include <asm/proc-fns.h> #include "common.h" #include "pm.h" @@ -84,7 +83,6 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, { struct idle_statedata *cx = state_ptr + index; u32 mpuss_can_lose_context = 0; - int cpu_id = smp_processor_id(); /* * CPU0 has to wait and stay ON until CPU1 is OFF state. @@ -112,7 +110,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, mpuss_can_lose_context = (cx->mpu_state == PWRDM_POWER_RET) && (cx->mpu_logic_state == PWRDM_POWER_OFF); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id); + tick_broadcast_enter(); /* * Call idle CPU PM enter notifier chain so that @@ -169,7 +167,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, if (dev->cpu == 0 && mpuss_can_lose_context) cpu_cluster_pm_exit(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id); + tick_broadcast_exit(); fail: cpuidle_coupled_parallel_barrier(dev, &abort_barrier); @@ -184,8 +182,7 @@ fail: */ static void omap_setup_broadcast_timer(void *arg) { - int cpu = smp_processor_id(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); + tick_broadcast_enable(); } static struct cpuidle_driver omap4_idle_driver = { diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 7a050f9c37ff..f492ae147c6a 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -26,6 +26,8 @@ #include <linux/of.h> #include <linux/of_platform.h> #include <linux/slab.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> #include <video/omapdss.h> #include "omap_hwmod.h" @@ -104,6 +106,10 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = { { "dss_hdmi", "omapdss_hdmi", -1 }, }; +#define OMAP4_DSIPHY_SYSCON_OFFSET 0x78 + +static struct regmap *omap4_dsi_mux_syscon; + static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) { u32 enable_mask, enable_shift; @@ -124,7 +130,7 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) return -ENODEV; } - reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY); + regmap_read(omap4_dsi_mux_syscon, OMAP4_DSIPHY_SYSCON_OFFSET, ®); reg &= ~enable_mask; reg &= ~pipd_mask; @@ -132,7 +138,7 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) reg |= (lanes << enable_shift) & enable_mask; reg |= (lanes << pipd_shift) & pipd_mask; - omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY); + regmap_write(omap4_dsi_mux_syscon, OMAP4_DSIPHY_SYSCON_OFFSET, reg); return 0; } @@ -665,5 +671,10 @@ int __init omapdss_init_of(void) return r; } + /* add DSI info for omap4 */ + node = of_find_node_by_name(NULL, "omap4_padconf_global"); + if (node) + omap4_dsi_mux_syscon = syscon_node_to_regmap(node); + return 0; } diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index d5951b17b736..72918c4973ea 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -96,14 +96,6 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, gpmc_nand_res[1].start = gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE); gpmc_nand_res[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); - if (gpmc_t) { - err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t); - if (err < 0) { - pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n", err); - return err; - } - } - memset(&s, 0, sizeof(struct gpmc_settings)); if (gpmc_nand_data->of_node) gpmc_read_settings_dt(gpmc_nand_data->of_node, &s); @@ -111,6 +103,16 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, gpmc_set_legacy(gpmc_nand_data, &s); s.device_nand = true; + + if (gpmc_t) { + err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t, &s); + if (err < 0) { + pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n", + err); + return err; + } + } + err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s); if (err < 0) goto out_free_cs; diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 53d197e0c1f3..f899e77ff5e6 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -293,7 +293,7 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base) if (ret < 0) return ret; - ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t); + ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t, &onenand_async); if (ret < 0) return ret; @@ -331,7 +331,7 @@ static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr) if (ret < 0) return ret; - ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t); + ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t, &onenand_sync); if (ret < 0) return ret; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index dc6e79c4484a..9a8611ab5dfa 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -150,9 +150,13 @@ static int nop_mmc_set_power(struct device *dev, int power_on, int vdd) static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data *mmc_controller, int controller_nr) { - if (gpio_is_valid(mmc_controller->switch_pin) && - (mmc_controller->switch_pin < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->switch_pin, + if (gpio_is_valid(mmc_controller->gpio_cd) && + (mmc_controller->gpio_cd < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->gpio_cd, + OMAP_PIN_INPUT_PULLUP); + if (gpio_is_valid(mmc_controller->gpio_cod) && + (mmc_controller->gpio_cod < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->gpio_cod, OMAP_PIN_INPUT_PULLUP); if (gpio_is_valid(mmc_controller->gpio_wp) && (mmc_controller->gpio_wp < OMAP_MAX_GPIO_LINES)) @@ -250,15 +254,20 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, mmc->internal_clock = !c->ext_clock; mmc->reg_offset = 0; - mmc->switch_pin = c->gpio_cd; + if (c->cover_only) { + /* detect if mobile phone cover removed */ + mmc->gpio_cd = -EINVAL; + mmc->gpio_cod = c->gpio_cd; + } else { + /* card detect pin on the mmc socket itself */ + mmc->gpio_cd = c->gpio_cd; + mmc->gpio_cod = -EINVAL; + } mmc->gpio_wp = c->gpio_wp; mmc->remux = c->remux; mmc->init_card = c->init_card; - if (c->cover_only) - mmc->cover = 1; - if (c->nonremovable) mmc->nonremovable = 1; @@ -358,7 +367,15 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c) if (!mmc_pdata) continue; - mmc_pdata->switch_pin = c->gpio_cd; + if (c->cover_only) { + /* detect if mobile phone cover removed */ + mmc_pdata->gpio_cd = -EINVAL; + mmc_pdata->gpio_cod = c->gpio_cd; + } else { + /* card detect pin on the mmc socket itself */ + mmc_pdata->gpio_cd = c->gpio_cd; + mmc_pdata->gpio_cod = -EINVAL; + } mmc_pdata->gpio_wp = c->gpio_wp; res = omap_device_register(pdev); diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 2a2f4d56e4c8..e3f713ffb06b 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -52,7 +52,10 @@ EXPORT_SYMBOL(omap_rev); int omap_type(void) { - u32 val = 0; + static u32 val = OMAP2_DEVICETYPE_MASK; + + if (val < OMAP2_DEVICETYPE_MASK) + return val; if (cpu_is_omap24xx()) { val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); @@ -720,6 +723,8 @@ static const char * __init omap_get_family(void) return kasprintf(GFP_KERNEL, "OMAP4"); else if (soc_is_omap54xx()) return kasprintf(GFP_KERNEL, "OMAP5"); + else if (soc_is_am33xx() || soc_is_am335x()) + return kasprintf(GFP_KERNEL, "AM33xx"); else if (soc_is_am43xx()) return kasprintf(GFP_KERNEL, "AM43xx"); else if (soc_is_dra7xx()) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index c4871c55bd8b..820dde8b5b04 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -306,7 +306,6 @@ void __init am33xx_map_io(void) void __init omap4_map_io(void) { iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); - omap_barriers_init(); } #endif @@ -314,7 +313,6 @@ void __init omap4_map_io(void) void __init omap5_map_io(void) { iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc)); - omap_barriers_init(); } #endif /* @@ -384,13 +382,9 @@ void __init omap2420_init_early(void) omap2_set_globals_tap(OMAP242X_CLASS, OMAP2_L4_IO_ADDRESS(0x48014000)); omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE), OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE)); - omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE), - NULL); - omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE)); - omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), NULL); + omap2_control_base_init(); omap2xxx_check_revision(); - omap2xxx_prm_init(); - omap2xxx_cm_init(); + omap2_prcm_base_init(); omap2xxx_voltagedomains_init(); omap242x_powerdomains_init(); omap242x_clockdomains_init(); @@ -414,13 +408,9 @@ void __init omap2430_init_early(void) omap2_set_globals_tap(OMAP243X_CLASS, OMAP2_L4_IO_ADDRESS(0x4900a000)); omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE), OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE)); - omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE), - NULL); - omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE)); - omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), NULL); + omap2_control_base_init(); omap2xxx_check_revision(); - omap2xxx_prm_init(); - omap2xxx_cm_init(); + omap2_prcm_base_init(); omap2xxx_voltagedomains_init(); omap243x_powerdomains_init(); omap243x_clockdomains_init(); @@ -448,21 +438,30 @@ void __init omap3_init_early(void) omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000)); omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE), OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE)); - omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE), - NULL); - omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE)); - omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL); + /* XXX: remove these once OMAP3 is DT only */ + if (!of_have_populated_dt()) { + omap2_set_globals_control( + OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE)); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), + NULL); + } + omap2_control_base_init(); omap3xxx_check_revision(); omap3xxx_check_features(); - omap3xxx_prm_init(); - omap3xxx_cm_init(); + omap2_prcm_base_init(); + /* XXX: remove these once OMAP3 is DT only */ + if (!of_have_populated_dt()) { + omap3xxx_prm_init(NULL); + omap3xxx_cm_init(NULL); + } omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); omap3xxx_clockdomains_init(); omap3xxx_hwmod_init(); omap_hwmod_init_postsetup(); if (!of_have_populated_dt()) { - omap3_prcm_legacy_iomaps_init(); + omap3_control_legacy_iomap_init(); if (soc_is_am35xx()) omap_clk_soc_init = am35xx_clk_legacy_init; else if (cpu_is_omap3630()) @@ -549,14 +548,10 @@ void __init ti814x_init_early(void) { omap2_set_globals_tap(TI814X_CLASS, OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE)); - omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE), - NULL); - omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE)); - omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL); + omap2_control_base_init(); omap3xxx_check_revision(); ti81xx_check_features(); - am33xx_prm_init(); - am33xx_cm_init(); + omap2_prcm_base_init(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); ti81xx_clockdomains_init(); @@ -570,14 +565,10 @@ void __init ti816x_init_early(void) { omap2_set_globals_tap(TI816X_CLASS, OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE)); - omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE), - NULL); - omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE)); - omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL); + omap2_control_base_init(); omap3xxx_check_revision(); ti81xx_check_features(); - am33xx_prm_init(); - am33xx_cm_init(); + omap2_prcm_base_init(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); ti81xx_clockdomains_init(); @@ -593,14 +584,10 @@ void __init am33xx_init_early(void) { omap2_set_globals_tap(AM335X_CLASS, AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE)); - omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE), - NULL); - omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE)); - omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL); + omap2_control_base_init(); omap3xxx_check_revision(); am33xx_check_features(); - am33xx_prm_init(); - am33xx_cm_init(); + omap2_prcm_base_init(); am33xx_powerdomains_init(); am33xx_clockdomains_init(); am33xx_hwmod_init(); @@ -619,16 +606,10 @@ void __init am43xx_init_early(void) { omap2_set_globals_tap(AM335X_CLASS, AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE)); - omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE), - NULL); - omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE)); - omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE), NULL); - omap_prm_base_init(); - omap_cm_base_init(); + omap2_control_base_init(); omap3xxx_check_revision(); am33xx_check_features(); - omap44xx_prm_init(); - omap4_cm_init(); + omap2_prcm_base_init(); am43xx_powerdomains_init(); am43xx_clockdomains_init(); am43xx_hwmod_init(); @@ -648,19 +629,12 @@ void __init omap4430_init_early(void) { omap2_set_globals_tap(OMAP443X_CLASS, OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE)); - omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), - OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE)); - omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE)); - omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), - OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE)); omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE)); - omap_prm_base_init(); - omap_cm_base_init(); + omap2_control_base_init(); omap4xxx_check_revision(); omap4xxx_check_features(); - omap4_cm_init(); + omap2_prcm_base_init(); omap4_pm_init_early(); - omap44xx_prm_init(); omap44xx_voltagedomains_init(); omap44xx_powerdomains_init(); omap44xx_clockdomains_init(); @@ -683,18 +657,11 @@ void __init omap5_init_early(void) { omap2_set_globals_tap(OMAP54XX_CLASS, OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE)); - omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE), - OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE)); - omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE)); - omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE), - OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE)); omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE)); + omap2_control_base_init(); omap4_pm_init_early(); - omap_prm_base_init(); - omap_cm_base_init(); - omap44xx_prm_init(); + omap2_prcm_base_init(); omap5xxx_check_revision(); - omap4_cm_init(); omap54xx_voltagedomains_init(); omap54xx_powerdomains_init(); omap54xx_clockdomains_init(); @@ -715,18 +682,11 @@ void __init omap5_init_late(void) void __init dra7xx_init_early(void) { omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE)); - omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE), - OMAP2_L4_IO_ADDRESS(DRA7XX_CTRL_BASE)); - omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE)); - omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(DRA7XX_CM_CORE_AON_BASE), - OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE)); omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE)); + omap2_control_base_init(); omap4_pm_init_early(); - omap_prm_base_init(); - omap_cm_base_init(); - omap44xx_prm_init(); + omap2_prcm_base_init(); dra7xxx_check_revision(); - omap4_cm_init(); dra7xx_powerdomains_init(); dra7xx_clockdomains_init(); dra7xx_hwmod_init(); @@ -764,7 +724,11 @@ int __init omap_clk_init(void) ti_clk_init_features(); if (of_have_populated_dt()) { - ret = of_prcm_init(); + ret = omap_control_init(); + if (ret) + return ret; + + ret = omap_prcm_init(); if (ret) return ret; diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 78064b0d4db5..176eef6ef338 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -1053,7 +1053,7 @@ static void __init omap_mux_init_list(struct omap_mux_partition *partition, struct omap_mux *entry; #ifdef CONFIG_OMAP_MUX - if (!superset->muxnames || !superset->muxnames[0]) { + if (!superset->muxnames[0]) { superset++; continue; } diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index dec2b05d184b..af2851fbcdf0 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -70,13 +70,6 @@ extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs, extern u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits); extern u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag); -#ifdef CONFIG_OMAP4_ERRATA_I688 -extern int omap_barrier_reserve_memblock(void); -#else -static inline void omap_barrier_reserve_memblock(void) -{ } -#endif - #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER void set_cntfreq(void); #else diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index f961c46453b9..3b56722dfd8a 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -20,11 +20,12 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/cpu.h> #include <linux/notifier.h> #include <linux/cpu_pm.h> -#include <linux/irqchip/arm-gic.h> #include "omap-wakeupgen.h" #include "omap-secure.h" @@ -78,29 +79,12 @@ static inline void sar_writel(u32 val, u32 offset, u8 idx) static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index) { - unsigned int spi_irq; - - /* - * PPIs and SGIs are not supported. - */ - if (irq < OMAP44XX_IRQ_GIC_START) - return -EINVAL; - - /* - * Subtract the GIC offset. - */ - spi_irq = irq - OMAP44XX_IRQ_GIC_START; - if (spi_irq > MAX_IRQS) { - pr_err("omap wakeupGen: Invalid IRQ%d\n", irq); - return -EINVAL; - } - /* * Each WakeupGen register controls 32 interrupt. * i.e. 1 bit per SPI IRQ */ - *reg_index = spi_irq >> 5; - *bit_posn = spi_irq %= 32; + *reg_index = irq >> 5; + *bit_posn = irq %= 32; return 0; } @@ -141,6 +125,7 @@ static void wakeupgen_mask(struct irq_data *d) raw_spin_lock_irqsave(&wakeupgen_lock, flags); _wakeupgen_clear(d->hwirq, irq_target_cpu[d->hwirq]); raw_spin_unlock_irqrestore(&wakeupgen_lock, flags); + irq_chip_mask_parent(d); } /* @@ -153,6 +138,7 @@ static void wakeupgen_unmask(struct irq_data *d) raw_spin_lock_irqsave(&wakeupgen_lock, flags); _wakeupgen_set(d->hwirq, irq_target_cpu[d->hwirq]); raw_spin_unlock_irqrestore(&wakeupgen_lock, flags); + irq_chip_unmask_parent(d); } #ifdef CONFIG_HOTPLUG_CPU @@ -400,15 +386,91 @@ int omap_secure_apis_support(void) return omap_secure_apis; } +static struct irq_chip wakeupgen_chip = { + .name = "WUGEN", + .irq_eoi = irq_chip_eoi_parent, + .irq_mask = wakeupgen_mask, + .irq_unmask = wakeupgen_unmask, + .irq_retrigger = irq_chip_retrigger_hierarchy, + .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND, +#ifdef CONFIG_SMP + .irq_set_affinity = irq_chip_set_affinity_parent, +#endif +}; + +static int wakeupgen_domain_xlate(struct irq_domain *domain, + struct device_node *controller, + const u32 *intspec, + unsigned int intsize, + unsigned long *out_hwirq, + unsigned int *out_type) +{ + if (domain->of_node != controller) + return -EINVAL; /* Shouldn't happen, really... */ + if (intsize != 3) + return -EINVAL; /* Not GIC compliant */ + if (intspec[0] != 0) + return -EINVAL; /* No PPI should point to this domain */ + + *out_hwirq = intspec[1]; + *out_type = intspec[2]; + return 0; +} + +static int wakeupgen_domain_alloc(struct irq_domain *domain, + unsigned int virq, + unsigned int nr_irqs, void *data) +{ + struct of_phandle_args *args = data; + struct of_phandle_args parent_args; + irq_hw_number_t hwirq; + int i; + + if (args->args_count != 3) + return -EINVAL; /* Not GIC compliant */ + if (args->args[0] != 0) + return -EINVAL; /* No PPI should point to this domain */ + + hwirq = args->args[1]; + if (hwirq >= MAX_IRQS) + return -EINVAL; /* Can't deal with this */ + + for (i = 0; i < nr_irqs; i++) + irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i, + &wakeupgen_chip, NULL); + + parent_args = *args; + parent_args.np = domain->parent->of_node; + return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args); +} + +static struct irq_domain_ops wakeupgen_domain_ops = { + .xlate = wakeupgen_domain_xlate, + .alloc = wakeupgen_domain_alloc, + .free = irq_domain_free_irqs_common, +}; + /* * Initialise the wakeupgen module. */ -int __init omap_wakeupgen_init(void) +static int __init wakeupgen_init(struct device_node *node, + struct device_node *parent) { + struct irq_domain *parent_domain, *domain; int i; unsigned int boot_cpu = smp_processor_id(); u32 val; + if (!parent) { + pr_err("%s: no parent, giving up\n", node->full_name); + return -ENODEV; + } + + parent_domain = irq_find_host(parent); + if (!parent_domain) { + pr_err("%s: unable to obtain parent domain\n", node->full_name); + return -ENXIO; + } /* Not supported on OMAP4 ES1.0 silicon */ if (omap_rev() == OMAP4430_REV_ES1_0) { WARN(1, "WakeupGen: Not supported on OMAP4430 ES1.0\n"); @@ -416,7 +478,7 @@ int __init omap_wakeupgen_init(void) } /* Static mapping, never released */ - wakeupgen_base = ioremap(OMAP_WKUPGEN_BASE, SZ_4K); + wakeupgen_base = of_iomap(node, 0); if (WARN_ON(!wakeupgen_base)) return -ENOMEM; @@ -429,6 +491,14 @@ int __init omap_wakeupgen_init(void) max_irqs = AM43XX_IRQS; } + domain = irq_domain_add_hierarchy(parent_domain, 0, max_irqs, + node, &wakeupgen_domain_ops, + NULL); + if (!domain) { + iounmap(wakeupgen_base); + return -ENOMEM; + } + /* Clear all IRQ bitmasks at wakeupGen level */ for (i = 0; i < irq_banks; i++) { wakeupgen_writel(0, i, CPU0_ID); @@ -437,14 +507,6 @@ int __init omap_wakeupgen_init(void) } /* - * Override GIC architecture specific functions to add - * OMAP WakeupGen interrupt controller along with GIC - */ - gic_arch_extn.irq_mask = wakeupgen_mask; - gic_arch_extn.irq_unmask = wakeupgen_unmask; - gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE; - - /* * FIXME: Add support to set_smp_affinity() once the core * GIC code has necessary hooks in place. */ @@ -474,3 +536,9 @@ int __init omap_wakeupgen_init(void) return 0; } + +/* + * We cannot use the IRQCHIP_DECLARE macro that lives in + * drivers/irqchip, so we're forced to roll our own. Not very nice. + */ +OF_DECLARE_2(irqchip, ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init); diff --git a/arch/arm/mach-omap2/omap-wakeupgen.h b/arch/arm/mach-omap2/omap-wakeupgen.h index b3c8eccfae79..a3491ad12368 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.h +++ b/arch/arm/mach-omap2/omap-wakeupgen.h @@ -33,7 +33,6 @@ #define OMAP_TIMESTAMPCYCLELO 0xc08 #define OMAP_TIMESTAMPCYCLEHI 0xc0c -extern int __init omap_wakeupgen_init(void); extern void __iomem *omap_get_wakeupgen_base(void); extern int omap_secure_apis_support(void); #endif diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index cee0fe1ee6ff..16350eefa66c 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -22,7 +22,6 @@ #include <linux/of_platform.h> #include <linux/export.h> #include <linux/irqchip/arm-gic.h> -#include <linux/irqchip/irq-crossbar.h> #include <linux/of_address.h> #include <linux/reboot.h> #include <linux/genalloc.h> @@ -52,75 +51,6 @@ static void __iomem *twd_base; #define IRQ_LOCALTIMER 29 -#ifdef CONFIG_OMAP4_ERRATA_I688 -/* Used to implement memory barrier on DRAM path */ -#define OMAP4_DRAM_BARRIER_VA 0xfe600000 - -void __iomem *dram_sync, *sram_sync; - -static phys_addr_t paddr; -static u32 size; - -void omap_bus_sync(void) -{ - if (dram_sync && sram_sync) { - writel_relaxed(readl_relaxed(dram_sync), dram_sync); - writel_relaxed(readl_relaxed(sram_sync), sram_sync); - isb(); - } -} -EXPORT_SYMBOL(omap_bus_sync); - -static int __init omap4_sram_init(void) -{ - struct device_node *np; - struct gen_pool *sram_pool; - - np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu"); - if (!np) - pr_warn("%s:Unable to allocate sram needed to handle errata I688\n", - __func__); - sram_pool = of_get_named_gen_pool(np, "sram", 0); - if (!sram_pool) - pr_warn("%s:Unable to get sram pool needed to handle errata I688\n", - __func__); - else - sram_sync = (void *)gen_pool_alloc(sram_pool, PAGE_SIZE); - - return 0; -} -omap_arch_initcall(omap4_sram_init); - -/* Steal one page physical memory for barrier implementation */ -int __init omap_barrier_reserve_memblock(void) -{ - - size = ALIGN(PAGE_SIZE, SZ_1M); - paddr = arm_memblock_steal(size, SZ_1M); - - return 0; -} - -void __init omap_barriers_init(void) -{ - struct map_desc dram_io_desc[1]; - - dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA; - dram_io_desc[0].pfn = __phys_to_pfn(paddr); - dram_io_desc[0].length = size; - dram_io_desc[0].type = MT_MEMORY_RW_SO; - iotable_init(dram_io_desc, ARRAY_SIZE(dram_io_desc)); - dram_sync = (void __iomem *) dram_io_desc[0].virtual; - - pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n", - (long long) paddr, dram_io_desc[0].virtual); - -} -#else -void __init omap_barriers_init(void) -{} -#endif - void gic_dist_disable(void) { if (gic_dist_base_addr) @@ -242,26 +172,26 @@ static int __init omap4_sar_ram_init(void) } omap_early_initcall(omap4_sar_ram_init); -static const struct of_device_id gic_match[] = { - { .compatible = "arm,cortex-a9-gic", }, - { .compatible = "arm,cortex-a15-gic", }, +static const struct of_device_id intc_match[] = { + { .compatible = "ti,omap4-wugen-mpu", }, + { .compatible = "ti,omap5-wugen-mpu", }, { }, }; -static struct device_node *gic_node; +static struct device_node *intc_node; unsigned int omap4_xlate_irq(unsigned int hwirq) { struct of_phandle_args irq_data; unsigned int irq; - if (!gic_node) - gic_node = of_find_matching_node(NULL, gic_match); + if (!intc_node) + intc_node = of_find_matching_node(NULL, intc_match); - if (WARN_ON(!gic_node)) + if (WARN_ON(!intc_node)) return hwirq; - irq_data.np = gic_node; + irq_data.np = intc_node; irq_data.args_count = 3; irq_data.args[0] = 0; irq_data.args[1] = hwirq - OMAP44XX_IRQ_GIC_START; @@ -278,6 +208,12 @@ void __init omap_gic_of_init(void) { struct device_node *np; + intc_node = of_find_matching_node(NULL, intc_match); + if (WARN_ON(!intc_node)) { + pr_err("No WUGEN found in DT, system will misbehave.\n"); + pr_err("UPDATE YOUR DEVICE TREE!\n"); + } + /* Extract GIC distributor and TWD bases for OMAP4460 ROM Errata WA */ if (!cpu_is_omap446x()) goto skip_errata_init; @@ -291,9 +227,5 @@ void __init omap_gic_of_init(void) WARN_ON(!twd_base); skip_errata_init: - omap_wakeupgen_init(); -#ifdef CONFIG_IRQ_CROSSBAR - irqcrossbar_init(); -#endif irqchip_init(); } diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index be9541e18650..166b18f515a2 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -690,6 +690,9 @@ struct dev_pm_domain omap_device_pm_domain = { USE_PLATFORM_PM_SLEEP_OPS .suspend_noirq = _od_suspend_noirq, .resume_noirq = _od_resume_noirq, + .freeze_noirq = _od_suspend_noirq, + .thaw_noirq = _od_resume_noirq, + .restore_noirq = _od_resume_noirq, } }; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 92afb723dcfc..355b08936871 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1692,16 +1692,15 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) if (ret == -EBUSY) pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name); - if (!ret) { + if (oh->clkdm) { /* * Set the clockdomain to HW_AUTO, assuming that the * previous state was HW_AUTO. */ - if (oh->clkdm && hwsup) + if (hwsup) clkdm_allow_idle(oh->clkdm); - } else { - if (oh->clkdm) - clkdm_hwmod_disable(oh->clkdm, oh); + + clkdm_hwmod_disable(oh->clkdm, oh); } return ret; @@ -2698,6 +2697,7 @@ static int __init _register(struct omap_hwmod *oh) INIT_LIST_HEAD(&oh->master_ports); INIT_LIST_HEAD(&oh->slave_ports); spin_lock_init(&oh->_lock); + lockdep_set_class(&oh->_lock, &oh->hwmod_key); oh->_state = _HWMOD_STATE_REGISTERED; diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 9d4bec6ee742..9611c91d9b82 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -674,6 +674,7 @@ struct omap_hwmod { u32 _sysc_cache; void __iomem *_mpu_rt_va; spinlock_t _lock; + struct lock_class_key hwmod_key; /* unique lock class */ struct list_head node; struct omap_hwmod_ocp_if *_mpu_port; unsigned int (*xlate_irq)(unsigned int); diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index 8eb85925e444..e2223148ba4d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -20,6 +20,7 @@ #include "omap_hwmod_33xx_43xx_common_data.h" #include "prcm43xx.h" #include "omap_hwmod_common_data.h" +#include "hdq1w.h" /* IP blocks */ @@ -516,6 +517,33 @@ static struct omap_hwmod am43xx_dss_rfbi_hwmod = { .parent_hwmod = &am43xx_dss_core_hwmod, }; +/* HDQ1W */ +static struct omap_hwmod_class_sysconfig am43xx_hdq1w_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0014, + .syss_offs = 0x0018, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class am43xx_hdq1w_hwmod_class = { + .name = "hdq1w", + .sysc = &am43xx_hdq1w_sysc, + .reset = &omap_hdq1w_reset, +}; + +static struct omap_hwmod am43xx_hdq1w_hwmod = { + .name = "hdq1w", + .class = &am43xx_hdq1w_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_HDQ1W_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + /* Interfaces */ static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = { .master = &am33xx_l3_main_hwmod, @@ -790,6 +818,13 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +static struct omap_hwmod_ocp_if am43xx_l4_ls__hdq1w = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_hdq1w_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_wkup__synctimer, &am43xx_l4_ls__timer8, @@ -889,6 +924,7 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_ls__dss, &am43xx_l4_ls__dss_dispc, &am43xx_l4_ls__dss_rfbi, + &am43xx_l4_ls__hdq1w, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index e8692e7675b8..0e64c2fac0b5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1466,55 +1466,18 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = { * */ -static struct omap_hwmod_class dra7xx_pcie_hwmod_class = { +static struct omap_hwmod_class dra7xx_pciess_hwmod_class = { .name = "pcie", }; /* pcie1 */ -static struct omap_hwmod dra7xx_pcie1_hwmod = { +static struct omap_hwmod dra7xx_pciess1_hwmod = { .name = "pcie1", - .class = &dra7xx_pcie_hwmod_class, + .class = &dra7xx_pciess_hwmod_class, .clkdm_name = "pcie_clkdm", .main_clk = "l4_root_clk_div", .prcm = { .omap4 = { - .clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* pcie2 */ -static struct omap_hwmod dra7xx_pcie2_hwmod = { - .name = "pcie2", - .class = &dra7xx_pcie_hwmod_class, - .clkdm_name = "pcie_clkdm", - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'PCIE PHY' class - * - */ - -static struct omap_hwmod_class dra7xx_pcie_phy_hwmod_class = { - .name = "pcie-phy", -}; - -/* pcie1 phy */ -static struct omap_hwmod dra7xx_pcie1_phy_hwmod = { - .name = "pcie1-phy", - .class = &dra7xx_pcie_phy_hwmod_class, - .clkdm_name = "l3init_clkdm", - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET, .context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET, .modulemode = MODULEMODE_SWCTRL, @@ -1522,11 +1485,11 @@ static struct omap_hwmod dra7xx_pcie1_phy_hwmod = { }, }; -/* pcie2 phy */ -static struct omap_hwmod dra7xx_pcie2_phy_hwmod = { - .name = "pcie2-phy", - .class = &dra7xx_pcie_phy_hwmod_class, - .clkdm_name = "l3init_clkdm", +/* pcie2 */ +static struct omap_hwmod dra7xx_pciess2_hwmod = { + .name = "pcie2", + .class = &dra7xx_pciess_hwmod_class, + .clkdm_name = "pcie_clkdm", .main_clk = "l4_root_clk_div", .prcm = { .omap4 = { @@ -1763,21 +1726,6 @@ static struct omap_hwmod_class dra7xx_timer_1ms_hwmod_class = { .sysc = &dra7xx_timer_1ms_sysc, }; -static struct omap_hwmod_class_sysconfig dra7xx_timer_secure_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class dra7xx_timer_secure_hwmod_class = { - .name = "timer", - .sysc = &dra7xx_timer_secure_sysc, -}; - static struct omap_hwmod_class_sysconfig dra7xx_timer_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, @@ -1841,7 +1789,7 @@ static struct omap_hwmod dra7xx_timer3_hwmod = { /* timer4 */ static struct omap_hwmod dra7xx_timer4_hwmod = { .name = "timer4", - .class = &dra7xx_timer_secure_hwmod_class, + .class = &dra7xx_timer_hwmod_class, .clkdm_name = "l4per_clkdm", .main_clk = "timer4_gfclk_mux", .prcm = { @@ -1958,6 +1906,66 @@ static struct omap_hwmod dra7xx_timer11_hwmod = { }, }; +/* timer13 */ +static struct omap_hwmod dra7xx_timer13_hwmod = { + .name = "timer13", + .class = &dra7xx_timer_hwmod_class, + .clkdm_name = "l4per3_clkdm", + .main_clk = "timer13_gfclk_mux", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4PER3_TIMER13_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4PER3_TIMER13_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* timer14 */ +static struct omap_hwmod dra7xx_timer14_hwmod = { + .name = "timer14", + .class = &dra7xx_timer_hwmod_class, + .clkdm_name = "l4per3_clkdm", + .main_clk = "timer14_gfclk_mux", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4PER3_TIMER14_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4PER3_TIMER14_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* timer15 */ +static struct omap_hwmod dra7xx_timer15_hwmod = { + .name = "timer15", + .class = &dra7xx_timer_hwmod_class, + .clkdm_name = "l4per3_clkdm", + .main_clk = "timer15_gfclk_mux", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4PER3_TIMER15_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4PER3_TIMER15_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* timer16 */ +static struct omap_hwmod dra7xx_timer16_hwmod = { + .name = "timer16", + .class = &dra7xx_timer_hwmod_class, + .clkdm_name = "l4per3_clkdm", + .main_clk = "timer16_gfclk_mux", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4PER3_TIMER16_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4PER3_TIMER16_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + /* * 'uart' class * @@ -2877,50 +2885,34 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp3 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_1 -> pcie1 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie1 = { +/* l3_main_1 -> pciess1 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess1 = { .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_pcie1_hwmod, + .slave = &dra7xx_pciess1_hwmod, .clk = "l3_iclk_div", .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_cfg -> pcie1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1 = { +/* l4_cfg -> pciess1 */ +static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess1 = { .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pcie1_hwmod, + .slave = &dra7xx_pciess1_hwmod, .clk = "l4_root_clk_div", .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_1 -> pcie2 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie2 = { +/* l3_main_1 -> pciess2 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess2 = { .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_pcie2_hwmod, + .slave = &dra7xx_pciess2_hwmod, .clk = "l3_iclk_div", .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_cfg -> pcie2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2 = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pcie2_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> pcie1 phy */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1_phy = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pcie1_phy_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> pcie2 phy */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2_phy = { +/* l4_cfg -> pciess2 */ +static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess2 = { .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pcie2_phy_hwmod, + .slave = &dra7xx_pciess2_hwmod, .clk = "l4_root_clk_div", .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3112,6 +3104,38 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer11 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_per3 -> timer13 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer13 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_timer13_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per3 -> timer14 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer14 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_timer14_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per3 -> timer15 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer15 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_timer15_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per3 -> timer16 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer16 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_timer16_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* l4_per1 -> uart1 */ static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart1 = { .master = &dra7xx_l4_per1_hwmod, @@ -3327,12 +3351,10 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_cfg__mpu, &dra7xx_l4_cfg__ocp2scp1, &dra7xx_l4_cfg__ocp2scp3, - &dra7xx_l3_main_1__pcie1, - &dra7xx_l4_cfg__pcie1, - &dra7xx_l3_main_1__pcie2, - &dra7xx_l4_cfg__pcie2, - &dra7xx_l4_cfg__pcie1_phy, - &dra7xx_l4_cfg__pcie2_phy, + &dra7xx_l3_main_1__pciess1, + &dra7xx_l4_cfg__pciess1, + &dra7xx_l3_main_1__pciess2, + &dra7xx_l4_cfg__pciess2, &dra7xx_l3_main_1__qspi, &dra7xx_l4_per3__rtcss, &dra7xx_l4_cfg__sata, @@ -3350,6 +3372,10 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per1__timer9, &dra7xx_l4_per1__timer10, &dra7xx_l4_per1__timer11, + &dra7xx_l4_per3__timer13, + &dra7xx_l4_per3__timer14, + &dra7xx_l4_per3__timer15, + &dra7xx_l4_per3__timer16, &dra7xx_l4_per1__uart1, &dra7xx_l4_per1__uart2, &dra7xx_l4_per1__uart3, diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 190fa43e7479..af11511dda50 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -14,7 +14,6 @@ #include <linux/kernel.h> #include <linux/of_platform.h> #include <linux/ti_wilink_st.h> -#include <linux/wl12xx.h> #include <linux/platform_data/pinctrl-single.h> #include <linux/platform_data/iommu-omap.h> @@ -35,34 +34,6 @@ struct pdata_init { struct of_dev_auxdata omap_auxdata_lookup[]; static struct twl4030_gpio_platform_data twl_gpio_auxdata; -#if IS_ENABLED(CONFIG_WL12XX) - -static struct wl12xx_platform_data wl12xx __initdata; - -static void __init __used legacy_init_wl12xx(unsigned ref_clock, - unsigned tcxo_clock, - int gpio) -{ - int res; - - wl12xx.board_ref_clock = ref_clock; - wl12xx.board_tcxo_clock = tcxo_clock; - wl12xx.irq = gpio_to_irq(gpio); - - res = wl12xx_set_platform_data(&wl12xx); - if (res) { - pr_err("error setting wl12xx data: %d\n", res); - return; - } -} -#else -static inline void legacy_init_wl12xx(unsigned ref_clock, - unsigned tcxo_clock, - int gpio) -{ -} -#endif - #ifdef CONFIG_MACH_NOKIA_N8X0 static void __init omap2420_n8x0_legacy_init(void) { @@ -129,7 +100,6 @@ static void __init omap3_sbc_t3730_twl_init(void) static void __init omap3_sbc_t3730_legacy_init(void) { omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub"); - legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 136); } static void __init omap3_sbc_t3530_legacy_init(void) @@ -159,26 +129,19 @@ static struct platform_device btwilink_device = { static void __init omap3_igep0020_rev_f_legacy_init(void) { - legacy_init_wl12xx(0, 0, 177); platform_device_register(&wl18xx_device); platform_device_register(&btwilink_device); } static void __init omap3_igep0030_rev_g_legacy_init(void) { - legacy_init_wl12xx(0, 0, 136); platform_device_register(&wl18xx_device); platform_device_register(&btwilink_device); } static void __init omap3_evm_legacy_init(void) { - legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 149); -} - -static void __init omap3_zoom_legacy_init(void) -{ - legacy_init_wl12xx(WL12XX_REFCLOCK_26, 0, 162); + hsmmc2_internal_input_clk(); } static void am35xx_enable_emac_int(void) @@ -245,7 +208,6 @@ static void __init omap3_sbc_t3517_legacy_init(void) am35xx_emac_reset(); hsmmc2_internal_input_clk(); omap3_sbc_t3517_wifi_init(); - legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 145); } static void __init am3517_evm_legacy_init(void) @@ -287,24 +249,6 @@ static void __init omap3_tao3530_legacy_init(void) } #endif /* CONFIG_ARCH_OMAP3 */ -#ifdef CONFIG_ARCH_OMAP4 -static void __init omap4_sdp_legacy_init(void) -{ - legacy_init_wl12xx(WL12XX_REFCLOCK_26, - WL12XX_TCXOCLOCK_26, 53); -} - -static void __init omap4_panda_legacy_init(void) -{ - legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53); -} - -static void __init var_som_om44_legacy_init(void) -{ - legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 41); -} -#endif - #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) static struct iommu_platform_data omap4_iommu_pdata = { .reset_name = "mmu_cache", @@ -313,13 +257,6 @@ static struct iommu_platform_data omap4_iommu_pdata = { }; #endif -#ifdef CONFIG_SOC_AM33XX -static void __init am335x_evmsk_legacy_init(void) -{ - legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 31); -} -#endif - #ifdef CONFIG_SOC_OMAP5 static void __init omap5_uevm_legacy_init(void) { @@ -420,19 +357,9 @@ static struct pdata_init pdata_quirks[] __initdata = { { "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, }, { "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, }, { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, - { "ti,omap3-zoom3", omap3_zoom_legacy_init, }, { "ti,am3517-evm", am3517_evm_legacy_init, }, { "technexion,omap3-tao3530", omap3_tao3530_legacy_init, }, #endif -#ifdef CONFIG_ARCH_OMAP4 - { "ti,omap4-sdp", omap4_sdp_legacy_init, }, - { "ti,omap4-panda", omap4_panda_legacy_init, }, - { "variscite,var-dvk-om44", var_som_om44_legacy_init, }, - { "variscite,var-stk-om44", var_som_om44_legacy_init, }, -#endif -#ifdef CONFIG_SOC_AM33XX - { "ti,am335x-evmsk", am335x_evmsk_legacy_init, }, -#endif #ifdef CONFIG_SOC_OMAP5 { "ti,omap5-uevm", omap5_uevm_legacy_init, }, #endif diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index fe01c5a03aa2..b1aad7e1426c 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -75,9 +75,9 @@ static int omap2_enter_full_retention(void) /* Clear old wake-up events */ /* REVISIT: These write to reserved bits? */ - omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0); - omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0); - omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0); + omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0); + omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0); + omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0); pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET); pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET); @@ -104,18 +104,16 @@ no_sleep: clk_enable(osc_ck); /* clear CORE wake-up events */ - omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0); - omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0); + omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0); + omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0); /* wakeup domain events - bit 1: GPT1, bit5 GPIO */ - omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, 0x4 | 0x1); + omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, 0x4 | 0x1); /* MPU domain wake events */ - omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET, - 0x1); + omap_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET, 0x1); - omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET, - 0x20); + omap_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET, 0x20); pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON); @@ -143,9 +141,9 @@ static void omap2_enter_mpu_retention(void) * it is in retention mode. */ if (omap2_allow_mpu_retention()) { /* REVISIT: These write to reserved bits? */ - omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0); - omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0); - omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0); + omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0); + omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0); + omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0); /* Try to enter MPU retention */ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 88721df6001d..87b98bf92366 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -137,9 +137,8 @@ static irqreturn_t _prcm_int_handle_io(int irq, void *unused) { int c; - c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1, - ~(OMAP3430_ST_IO_MASK | - OMAP3430_ST_IO_CHAIN_MASK)); + c = omap_prm_clear_mod_irqs(WKUP_MOD, 1, OMAP3430_ST_IO_MASK | + OMAP3430_ST_IO_CHAIN_MASK); return c ? IRQ_HANDLED : IRQ_NONE; } @@ -153,14 +152,13 @@ static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused) * these are handled in a separate handler to avoid acking * IO events before parsing in mux code */ - c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1, - OMAP3430_ST_IO_MASK | - OMAP3430_ST_IO_CHAIN_MASK); - c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 1, 0); - c += omap3xxx_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0); + c = omap_prm_clear_mod_irqs(WKUP_MOD, 1, ~(OMAP3430_ST_IO_MASK | + OMAP3430_ST_IO_CHAIN_MASK)); + c += omap_prm_clear_mod_irqs(CORE_MOD, 1, ~0); + c += omap_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, ~0); if (omap_rev() > OMAP3430_REV_ES1_0) { - c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 3, 0); - c += omap3xxx_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0); + c += omap_prm_clear_mod_irqs(CORE_MOD, 3, ~0); + c += omap_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, ~0); } return c ? IRQ_HANDLED : IRQ_NONE; diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 6163d66102a3..6ae0b3a1781e 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -518,6 +518,26 @@ struct omap_prcm_irq_setup { .priority = _priority \ } +/** + * struct omap_prcm_init_data - PRCM driver init data + * @index: clock memory mapping index to be used + * @mem: IO mem pointer for this module + * @offset: module base address offset from the IO base + * @flags: PRCM module init flags + * @device_inst_offset: device instance offset within the module address space + * @init: low level PRCM init function for this module + * @np: device node for this PRCM module + */ +struct omap_prcm_init_data { + int index; + void __iomem *mem; + s16 offset; + u16 flags; + s32 device_inst_offset; + int (*init)(const struct omap_prcm_init_data *data); + struct device_node *np; +}; + extern void omap_prcm_irq_cleanup(void); extern int omap_prcm_register_chain_handler( struct omap_prcm_irq_setup *irq_setup); diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h index ad7b3e9977f8..48df3b55057e 100644 --- a/arch/arm/mach-omap2/prcm43xx.h +++ b/arch/arm/mach-omap2/prcm43xx.h @@ -143,5 +143,6 @@ #define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268 #define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0 #define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20 +#define AM43XX_CM_PER_HDQ1W_CLKCTRL_OFFSET 0x04a0 #endif diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index b9061a6a2db8..233bc84fbc0e 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -19,8 +19,9 @@ extern void __iomem *prm_base; extern u16 prm_features; extern void omap2_set_globals_prm(void __iomem *prm); -int of_prcm_init(void); -void omap3_prcm_legacy_iomaps_init(void); +int omap_prcm_init(void); +int omap2_prm_base_init(void); +int omap2_prcm_base_init(void); # endif /* @@ -28,9 +29,11 @@ void omap3_prcm_legacy_iomaps_init(void); * * PRM_HAS_IO_WAKEUP: has IO wakeup capability * PRM_HAS_VOLTAGE: has voltage domains + * PRM_IRQ_DEFAULT: use default irq number for PRM irq */ -#define PRM_HAS_IO_WAKEUP (1 << 0) -#define PRM_HAS_VOLTAGE (1 << 1) +#define PRM_HAS_IO_WAKEUP BIT(0) +#define PRM_HAS_VOLTAGE BIT(1) +#define PRM_IRQ_DEFAULT BIT(2) /* * MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP @@ -146,6 +149,9 @@ struct prm_ll_data { int (*is_hardreset_asserted)(u8 shift, u8 part, s16 prm_mod, u16 offset); void (*reset_system)(void); + int (*clear_mod_irqs)(s16 module, u8 regs, u32 wkst_mask); + u32 (*vp_check_txdone)(u8 vp_id); + void (*vp_clear_txdone)(u8 vp_id); }; extern int prm_register(struct prm_ll_data *pld); @@ -161,6 +167,19 @@ extern void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx); void omap_prm_reset_system(void); void omap_prm_reconfigure_io_chain(void); +int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask); + +/* + * Voltage Processor (VP) identifiers + */ +#define OMAP3_VP_VDD_MPU_ID 0 +#define OMAP3_VP_VDD_CORE_ID 1 +#define OMAP4_VP_VDD_CORE_ID 0 +#define OMAP4_VP_VDD_IVA_ID 1 +#define OMAP4_VP_VDD_MPU_ID 2 + +u32 omap_prm_vp_check_txdone(u8 vp_id); +void omap_prm_vp_clear_txdone(u8 vp_id); #endif diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c index af0f15278fc2..752018ce129c 100644 --- a/arch/arm/mach-omap2/prm2xxx.c +++ b/arch/arm/mach-omap2/prm2xxx.c @@ -123,13 +123,14 @@ static void omap2xxx_prm_dpll_reset(void) * Clears wakeup status bits for a given module, so that the device can * re-enter idle. */ -void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask) +static int omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask) { u32 wkst; wkst = omap2_prm_read_mod_reg(module, regs); wkst &= wkst_mask; omap2_prm_write_mod_reg(wkst, module, regs); + return 0; } int omap2xxx_clkdm_sleep(struct clockdomain *clkdm) @@ -216,9 +217,10 @@ static struct prm_ll_data omap2xxx_prm_ll_data = { .deassert_hardreset = &omap2_prm_deassert_hardreset, .is_hardreset_asserted = &omap2_prm_is_hardreset_asserted, .reset_system = &omap2xxx_prm_dpll_reset, + .clear_mod_irqs = &omap2xxx_prm_clear_mod_irqs, }; -int __init omap2xxx_prm_init(void) +int __init omap2xxx_prm_init(const struct omap_prcm_init_data *data) { return prm_register(&omap2xxx_prm_ll_data); } diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h index 1d51643062f7..9008a9e55a1a 100644 --- a/arch/arm/mach-omap2/prm2xxx.h +++ b/arch/arm/mach-omap2/prm2xxx.h @@ -124,9 +124,7 @@ extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm); extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm); -void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask); - -extern int __init omap2xxx_prm_init(void); +int __init omap2xxx_prm_init(const struct omap_prcm_init_data *data); #endif diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c index 02f628601b09..dcb5001d77da 100644 --- a/arch/arm/mach-omap2/prm33xx.c +++ b/arch/arm/mach-omap2/prm33xx.c @@ -378,7 +378,7 @@ static struct prm_ll_data am33xx_prm_ll_data = { .reset_system = am33xx_prm_global_warm_sw_reset, }; -int __init am33xx_prm_init(void) +int __init am33xx_prm_init(const struct omap_prcm_init_data *data) { return prm_register(&am33xx_prm_ll_data); } diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h index 98ac41f271da..2bc4ec52ba78 100644 --- a/arch/arm/mach-omap2/prm33xx.h +++ b/arch/arm/mach-omap2/prm33xx.h @@ -118,7 +118,7 @@ #define AM33XX_PM_CEFUSE_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0004) #ifndef __ASSEMBLER__ -int am33xx_prm_init(void); +int am33xx_prm_init(const struct omap_prcm_init_data *data); #endif /* ASSEMBLER */ #endif diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index 5713bbdf83bc..62680aad2126 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -29,6 +29,7 @@ #include "prm-regbits-34xx.h" #include "cm3xxx.h" #include "cm-regbits-34xx.h" +#include "clock.h" static void omap3xxx_prm_read_pending_irqs(unsigned long *events); static void omap3xxx_prm_ocp_barrier(void); @@ -96,7 +97,7 @@ static struct omap3_vp omap3_vp[] = { #define MAX_VP_ID ARRAY_SIZE(omap3_vp); -u32 omap3_prm_vp_check_txdone(u8 vp_id) +static u32 omap3_prm_vp_check_txdone(u8 vp_id) { struct omap3_vp *vp = &omap3_vp[vp_id]; u32 irqstatus; @@ -106,7 +107,7 @@ u32 omap3_prm_vp_check_txdone(u8 vp_id) return irqstatus & vp->tranxdone_status; } -void omap3_prm_vp_clear_txdone(u8 vp_id) +static void omap3_prm_vp_clear_txdone(u8 vp_id) { struct omap3_vp *vp = &omap3_vp[vp_id]; @@ -217,7 +218,7 @@ static void omap3xxx_prm_restore_irqen(u32 *saved_mask) * omap3xxx_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt * @module: PRM module to clear wakeups from * @regs: register set to clear, 1 or 3 - * @ignore_bits: wakeup status bits to ignore + * @wkst_mask: wkst bits to clear * * The purpose of this function is to clear any wake-up events latched * in the PRCM PM_WKST_x registers. It is possible that a wake-up event @@ -226,7 +227,7 @@ static void omap3xxx_prm_restore_irqen(u32 *saved_mask) * that any peripheral wake-up events occurring while attempting to * clear the PM_WKST_x are detected and cleared. */ -int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits) +static int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask) { u32 wkst, fclk, iclk, clken; u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1; @@ -238,7 +239,7 @@ int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits) wkst = omap2_prm_read_mod_reg(module, wkst_off); wkst &= omap2_prm_read_mod_reg(module, grpsel_off); - wkst &= ~ignore_bits; + wkst &= wkst_mask; if (wkst) { iclk = omap2_cm_read_mod_reg(module, iclk_off); fclk = omap2_cm_read_mod_reg(module, fclk_off); @@ -254,7 +255,7 @@ int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits) omap2_cm_set_mod_reg_bits(clken, module, fclk_off); omap2_prm_write_mod_reg(wkst, module, wkst_off); wkst = omap2_prm_read_mod_reg(module, wkst_off); - wkst &= ~ignore_bits; + wkst &= wkst_mask; c++; } omap2_cm_write_mod_reg(iclk, module, iclk_off); @@ -664,10 +665,15 @@ static struct prm_ll_data omap3xxx_prm_ll_data = { .deassert_hardreset = &omap2_prm_deassert_hardreset, .is_hardreset_asserted = &omap2_prm_is_hardreset_asserted, .reset_system = &omap3xxx_prm_dpll3_reset, + .clear_mod_irqs = &omap3xxx_prm_clear_mod_irqs, + .vp_check_txdone = &omap3_prm_vp_check_txdone, + .vp_clear_txdone = &omap3_prm_vp_clear_txdone, }; -int __init omap3xxx_prm_init(void) +int __init omap3xxx_prm_init(const struct omap_prcm_init_data *data) { + omap2_clk_legacy_provider_init(TI_CLKM_PRM, + prm_base + OMAP3430_IVA2_MOD); if (omap3_has_io_wakeup()) prm_features |= PRM_HAS_IO_WAKEUP; diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h index ed8a3d8b739a..5f095eec339c 100644 --- a/arch/arm/mach-omap2/prm3xxx.h +++ b/arch/arm/mach-omap2/prm3xxx.h @@ -132,10 +132,6 @@ #ifndef __ASSEMBLER__ -/* OMAP3-specific VP functions */ -u32 omap3_prm_vp_check_txdone(u8 vp_id); -void omap3_prm_vp_clear_txdone(u8 vp_id); - /* * OMAP3 access functions for voltage controller (VC) and * voltage proccessor (VP) in the PRM. @@ -144,8 +140,7 @@ extern u32 omap3_prm_vcvp_read(u8 offset); extern void omap3_prm_vcvp_write(u32 val, u8 offset); extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); -extern int __init omap3xxx_prm_init(void); -int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits); +int __init omap3xxx_prm_init(const struct omap_prcm_init_data *data); void omap3xxx_prm_iva_idle(void); void omap3_prm_reset_modem(void); int omap3xxx_prm_clear_global_cold_reset(void); diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index a08a617a6c11..4541700f743a 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -138,7 +138,7 @@ static struct omap4_vp omap4_vp[] = { }, }; -u32 omap4_prm_vp_check_txdone(u8 vp_id) +static u32 omap4_prm_vp_check_txdone(u8 vp_id) { struct omap4_vp *vp = &omap4_vp[vp_id]; u32 irqstatus; @@ -149,7 +149,7 @@ u32 omap4_prm_vp_check_txdone(u8 vp_id) return irqstatus & vp->tranxdone_status; } -void omap4_prm_vp_clear_txdone(u8 vp_id) +static void omap4_prm_vp_clear_txdone(u8 vp_id) { struct omap4_vp *vp = &omap4_vp[vp_id]; @@ -252,10 +252,10 @@ static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask) { saved_mask[0] = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, - OMAP4_PRM_IRQSTATUS_MPU_OFFSET); + OMAP4_PRM_IRQENABLE_MPU_OFFSET); saved_mask[1] = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, - OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET); + OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_OFFSET); @@ -699,29 +699,31 @@ static struct prm_ll_data omap44xx_prm_ll_data = { .deassert_hardreset = omap4_prminst_deassert_hardreset, .is_hardreset_asserted = omap4_prminst_is_hardreset_asserted, .reset_system = omap4_prminst_global_warm_sw_reset, + .vp_check_txdone = omap4_prm_vp_check_txdone, + .vp_clear_txdone = omap4_prm_vp_clear_txdone, }; -int __init omap44xx_prm_init(void) +static const struct omap_prcm_init_data *prm_init_data; + +int __init omap44xx_prm_init(const struct omap_prcm_init_data *data) { - if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) + omap_prm_base_init(); + + prm_init_data = data; + + if (data->flags & PRM_HAS_IO_WAKEUP) prm_features |= PRM_HAS_IO_WAKEUP; - if (!soc_is_dra7xx()) + if (data->flags & PRM_HAS_VOLTAGE) prm_features |= PRM_HAS_VOLTAGE; + omap4_prminst_set_prm_dev_inst(data->device_inst_offset); + return prm_register(&omap44xx_prm_ll_data); } -static const struct of_device_id omap_prm_dt_match_table[] = { - { .compatible = "ti,omap4-prm" }, - { .compatible = "ti,omap5-prm" }, - { .compatible = "ti,dra7-prm" }, - { } -}; - static int omap44xx_prm_late_init(void) { - struct device_node *np; int irq_num; if (!(prm_features & PRM_HAS_IO_WAKEUP)) @@ -731,31 +733,23 @@ static int omap44xx_prm_late_init(void) if (!of_have_populated_dt()) return 0; - np = of_find_matching_node(NULL, omap_prm_dt_match_table); - - if (!np) { - /* Default loaded up with OMAP4 values */ - if (!cpu_is_omap44xx()) - return 0; - } else { - irq_num = of_irq_get(np, 0); - /* - * Already have OMAP4 IRQ num. For all other platforms, we need - * IRQ numbers from DT - */ - if (irq_num < 0 && !cpu_is_omap44xx()) { - if (irq_num == -EPROBE_DEFER) - return irq_num; - - /* Have nothing to do */ - return 0; - } - - /* Once OMAP4 DT is filled as well */ - if (irq_num >= 0) { - omap4_prcm_irq_setup.irq = irq_num; - omap4_prcm_irq_setup.xlate_irq = NULL; - } + irq_num = of_irq_get(prm_init_data->np, 0); + /* + * Already have OMAP4 IRQ num. For all other platforms, we need + * IRQ numbers from DT + */ + if (irq_num < 0 && !(prm_init_data->flags & PRM_IRQ_DEFAULT)) { + if (irq_num == -EPROBE_DEFER) + return irq_num; + + /* Have nothing to do */ + return 0; + } + + /* Once OMAP4 DT is filled as well */ + if (irq_num >= 0) { + omap4_prcm_irq_setup.irq = irq_num; + omap4_prcm_irq_setup.xlate_irq = NULL; } omap44xx_prm_enable_io_wakeup(); diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index 7db2422faa16..efd6035d0871 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -26,7 +26,6 @@ #define __ARCH_ARM_MACH_OMAP2_PRM44XX_H #include "prm44xx_54xx.h" -#include "prcm-common.h" #include "prm.h" #define OMAP4430_PRM_BASE 0x4a306000 diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h index 714329565b90..3f139ebc8398 100644 --- a/arch/arm/mach-omap2/prm44xx_54xx.h +++ b/arch/arm/mach-omap2/prm44xx_54xx.h @@ -23,13 +23,11 @@ #ifndef __ARCH_ARM_MACH_OMAP2_PRM44XX_54XX_H #define __ARCH_ARM_MACH_OMAP2_PRM44XX_54XX_H +#include "prcm-common.h" + /* Function prototypes */ #ifndef __ASSEMBLER__ -/* OMAP4/OMAP5-specific VP functions */ -u32 omap4_prm_vp_check_txdone(u8 vp_id); -void omap4_prm_vp_clear_txdone(u8 vp_id); - /* * OMAP4/OMAP5 access functions for voltage controller (VC) and * voltage proccessor (VP) in the PRM. @@ -38,7 +36,7 @@ extern u32 omap4_prm_vcvp_read(u8 offset); extern void omap4_prm_vcvp_write(u32 val, u8 offset); extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); -extern int __init omap44xx_prm_init(void); +int __init omap44xx_prm_init(const struct omap_prcm_init_data *data); #endif diff --git a/arch/arm/mach-omap2/prm54xx.h b/arch/arm/mach-omap2/prm54xx.h index e4411010309c..1eb22ff087dc 100644 --- a/arch/arm/mach-omap2/prm54xx.h +++ b/arch/arm/mach-omap2/prm54xx.h @@ -22,7 +22,6 @@ #define __ARCH_ARM_MACH_OMAP2_PRM54XX_H #include "prm44xx_54xx.h" -#include "prcm-common.h" #include "prm.h" #define OMAP54XX_PRM_BASE 0x4ae06000 diff --git a/arch/arm/mach-omap2/prm7xx.h b/arch/arm/mach-omap2/prm7xx.h index 4bb50fbf29be..cc1e6a2b97f6 100644 --- a/arch/arm/mach-omap2/prm7xx.h +++ b/arch/arm/mach-omap2/prm7xx.h @@ -22,8 +22,8 @@ #ifndef __ARCH_ARM_MACH_OMAP2_PRM7XX_H #define __ARCH_ARM_MACH_OMAP2_PRM7XX_H -#include "prm44xx_54xx.h" #include "prcm-common.h" +#include "prm44xx_54xx.h" #include "prm.h" #define DRA7XX_PRM_BASE 0x4ae06000 diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index bfaa7ba595cc..7add7994dbfc 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -32,7 +32,11 @@ #include "prm2xxx_3xxx.h" #include "prm2xxx.h" #include "prm3xxx.h" +#include "prm33xx.h" #include "prm44xx.h" +#include "prm54xx.h" +#include "prm7xx.h" +#include "prcm43xx.h" #include "common.h" #include "clock.h" #include "cm.h" @@ -534,6 +538,61 @@ void omap_prm_reset_system(void) } /** + * omap_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt + * @module: PRM module to clear wakeups from + * @regs: register to clear + * @wkst_mask: wkst bits to clear + * + * Clears any wakeup events for the module and register set defined. + * Uses SoC specific implementation to do the actual wakeup status + * clearing. + */ +int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask) +{ + if (!prm_ll_data->clear_mod_irqs) { + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); + return -EINVAL; + } + + return prm_ll_data->clear_mod_irqs(module, regs, wkst_mask); +} + +/** + * omap_prm_vp_check_txdone - check voltage processor TX done status + * + * Checks if voltage processor transmission has been completed. + * Returns non-zero if a transmission has completed, 0 otherwise. + */ +u32 omap_prm_vp_check_txdone(u8 vp_id) +{ + if (!prm_ll_data->vp_check_txdone) { + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); + return 0; + } + + return prm_ll_data->vp_check_txdone(vp_id); +} + +/** + * omap_prm_vp_clear_txdone - clears voltage processor TX done status + * + * Clears the status bit for completed voltage processor transmission + * returned by prm_vp_check_txdone. + */ +void omap_prm_vp_clear_txdone(u8 vp_id) +{ + if (!prm_ll_data->vp_clear_txdone) { + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); + return; + } + + prm_ll_data->vp_clear_txdone(vp_id); +} + +/** * prm_register - register per-SoC low-level data with the PRM * @pld: low-level per-SoC OMAP PRM data & function pointers to register * @@ -578,78 +637,175 @@ int prm_unregister(struct prm_ll_data *pld) return 0; } -static const struct of_device_id omap_prcm_dt_match_table[] = { - { .compatible = "ti,am3-prcm" }, - { .compatible = "ti,am3-scrm" }, - { .compatible = "ti,am4-prcm" }, - { .compatible = "ti,am4-scrm" }, - { .compatible = "ti,dm814-prcm" }, - { .compatible = "ti,dm814-scrm" }, - { .compatible = "ti,dm816-prcm" }, - { .compatible = "ti,dm816-scrm" }, - { .compatible = "ti,omap2-prcm" }, - { .compatible = "ti,omap2-scrm" }, - { .compatible = "ti,omap3-prm" }, - { .compatible = "ti,omap3-cm" }, - { .compatible = "ti,omap3-scrm" }, - { .compatible = "ti,omap4-cm1" }, - { .compatible = "ti,omap4-prm" }, - { .compatible = "ti,omap4-cm2" }, - { .compatible = "ti,omap4-scrm" }, - { .compatible = "ti,omap5-prm" }, - { .compatible = "ti,omap5-cm-core-aon" }, - { .compatible = "ti,omap5-scrm" }, - { .compatible = "ti,omap5-cm-core" }, - { .compatible = "ti,dra7-prm" }, - { .compatible = "ti,dra7-cm-core-aon" }, - { .compatible = "ti,dra7-cm-core" }, - { } +#ifdef CONFIG_ARCH_OMAP2 +static struct omap_prcm_init_data omap2_prm_data __initdata = { + .index = TI_CLKM_PRM, + .init = omap2xxx_prm_init, }; +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static struct omap_prcm_init_data omap3_prm_data __initdata = { + .index = TI_CLKM_PRM, + .init = omap3xxx_prm_init, -static struct clk_hw_omap memmap_dummy_ck = { - .flags = MEMMAP_ADDRESSING, + /* + * IVA2 offset is a negative value, must offset the prm_base + * address by this to get it to positive + */ + .offset = -OMAP3430_IVA2_MOD, }; +#endif -static u32 prm_clk_readl(void __iomem *reg) -{ - return omap2_clk_readl(&memmap_dummy_ck, reg); -} +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_TI81XX) +static struct omap_prcm_init_data am3_prm_data __initdata = { + .index = TI_CLKM_PRM, + .init = am33xx_prm_init, +}; +#endif + +#ifdef CONFIG_ARCH_OMAP4 +static struct omap_prcm_init_data omap4_prm_data __initdata = { + .index = TI_CLKM_PRM, + .init = omap44xx_prm_init, + .device_inst_offset = OMAP4430_PRM_DEVICE_INST, + .flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE | PRM_IRQ_DEFAULT, +}; +#endif + +#ifdef CONFIG_SOC_OMAP5 +static struct omap_prcm_init_data omap5_prm_data __initdata = { + .index = TI_CLKM_PRM, + .init = omap44xx_prm_init, + .device_inst_offset = OMAP54XX_PRM_DEVICE_INST, + .flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE, +}; +#endif + +#ifdef CONFIG_SOC_DRA7XX +static struct omap_prcm_init_data dra7_prm_data __initdata = { + .index = TI_CLKM_PRM, + .init = omap44xx_prm_init, + .device_inst_offset = DRA7XX_PRM_DEVICE_INST, + .flags = PRM_HAS_IO_WAKEUP, +}; +#endif -static void prm_clk_writel(u32 val, void __iomem *reg) -{ - omap2_clk_writel(val, &memmap_dummy_ck, reg); -} +#ifdef CONFIG_SOC_AM43XX +static struct omap_prcm_init_data am4_prm_data __initdata = { + .index = TI_CLKM_PRM, + .init = omap44xx_prm_init, + .device_inst_offset = AM43XX_PRM_DEVICE_INST, +}; +#endif -static struct ti_clk_ll_ops omap_clk_ll_ops = { - .clk_readl = prm_clk_readl, - .clk_writel = prm_clk_writel, +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) +static struct omap_prcm_init_data scrm_data __initdata = { + .index = TI_CLKM_SCRM, +}; +#endif + +static const struct of_device_id omap_prcm_dt_match_table[] __initconst = { +#ifdef CONFIG_SOC_AM33XX + { .compatible = "ti,am3-prcm", .data = &am3_prm_data }, +#endif +#ifdef CONFIG_SOC_AM43XX + { .compatible = "ti,am4-prcm", .data = &am4_prm_data }, +#endif +#ifdef CONFIG_SOC_TI81XX + { .compatible = "ti,dm814-prcm", .data = &am3_prm_data }, + { .compatible = "ti,dm816-prcm", .data = &am3_prm_data }, +#endif +#ifdef CONFIG_ARCH_OMAP2 + { .compatible = "ti,omap2-prcm", .data = &omap2_prm_data }, +#endif +#ifdef CONFIG_ARCH_OMAP3 + { .compatible = "ti,omap3-prm", .data = &omap3_prm_data }, +#endif +#ifdef CONFIG_ARCH_OMAP4 + { .compatible = "ti,omap4-prm", .data = &omap4_prm_data }, + { .compatible = "ti,omap4-scrm", .data = &scrm_data }, +#endif +#ifdef CONFIG_SOC_OMAP5 + { .compatible = "ti,omap5-prm", .data = &omap5_prm_data }, + { .compatible = "ti,omap5-scrm", .data = &scrm_data }, +#endif +#ifdef CONFIG_SOC_DRA7XX + { .compatible = "ti,dra7-prm", .data = &dra7_prm_data }, +#endif + { } }; -int __init of_prcm_init(void) +/** + * omap2_prm_base_init - initialize iomappings for the PRM driver + * + * Detects and initializes the iomappings for the PRM driver, based + * on the DT data. Returns 0 in success, negative error value + * otherwise. + */ +int __init omap2_prm_base_init(void) { struct device_node *np; + const struct of_device_id *match; + struct omap_prcm_init_data *data; void __iomem *mem; - int memmap_index = 0; - ti_clk_ll_ops = &omap_clk_ll_ops; + for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) { + data = (struct omap_prcm_init_data *)match->data; - for_each_matching_node(np, omap_prcm_dt_match_table) { mem = of_iomap(np, 0); - clk_memmaps[memmap_index] = mem; - ti_dt_clk_init_provider(np, memmap_index); - memmap_index++; + if (!mem) + return -ENOMEM; + + if (data->index == TI_CLKM_PRM) + prm_base = mem + data->offset; + + data->mem = mem; + + data->np = np; + + if (data->init) + data->init(data); } return 0; } -void __init omap3_prcm_legacy_iomaps_init(void) +int __init omap2_prcm_base_init(void) { - ti_clk_ll_ops = &omap_clk_ll_ops; + int ret; - clk_memmaps[TI_CLKM_CM] = cm_base + OMAP3430_IVA2_MOD; - clk_memmaps[TI_CLKM_PRM] = prm_base + OMAP3430_IVA2_MOD; - clk_memmaps[TI_CLKM_SCRM] = omap_ctrl_base_get(); + ret = omap2_prm_base_init(); + if (ret) + return ret; + + return omap2_cm_base_init(); +} + +/** + * omap_prcm_init - low level init for the PRCM drivers + * + * Initializes the low level clock infrastructure for PRCM drivers. + * Returns 0 in success, negative error value in failure. + */ +int __init omap_prcm_init(void) +{ + struct device_node *np; + const struct of_device_id *match; + const struct omap_prcm_init_data *data; + int ret; + + for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) { + data = match->data; + + ret = omap2_clk_provider_init(np, data->index, NULL, data->mem); + if (ret) + return ret; + } + + omap_cm_init(); + + return 0; } static int __init prm_late_init(void) diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c index 8adf7b1a1dce..c4859c4d3646 100644 --- a/arch/arm/mach-omap2/prminst44xx.c +++ b/arch/arm/mach-omap2/prminst44xx.c @@ -47,22 +47,14 @@ void omap_prm_base_init(void) s32 omap4_prmst_get_prm_dev_inst(void) { - if (prm_dev_inst != PRM_INSTANCE_UNKNOWN) - return prm_dev_inst; - - /* This cannot be done way early at boot.. as things are not setup */ - if (cpu_is_omap44xx()) - prm_dev_inst = OMAP4430_PRM_DEVICE_INST; - else if (soc_is_omap54xx()) - prm_dev_inst = OMAP54XX_PRM_DEVICE_INST; - else if (soc_is_dra7xx()) - prm_dev_inst = DRA7XX_PRM_DEVICE_INST; - else if (soc_is_am43xx()) - prm_dev_inst = AM43XX_PRM_DEVICE_INST; - return prm_dev_inst; } +void omap4_prminst_set_prm_dev_inst(s32 dev_inst) +{ + prm_dev_inst = dev_inst; +} + /* Read a register in a PRM instance */ u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx) { diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h index fb1c9d7a2f9d..0c03d0731d7f 100644 --- a/arch/arm/mach-omap2/prminst44xx.h +++ b/arch/arm/mach-omap2/prminst44xx.h @@ -14,6 +14,7 @@ #define PRM_INSTANCE_UNKNOWN -1 extern s32 omap4_prmst_get_prm_dev_inst(void); +void omap4_prminst_set_prm_dev_inst(s32 dev_inst); /* * In an ideal world, we would not export these low-level functions, diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index b84a0122d823..ad1bb9431e94 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -333,11 +333,9 @@ ENDPROC(omap4_cpu_resume) #endif /* defined(CONFIG_SMP) && defined(CONFIG_PM) */ -#ifndef CONFIG_OMAP4_ERRATA_I688 ENTRY(omap_bus_sync) ret lr ENDPROC(omap_bus_sync) -#endif ENTRY(omap_do_wfi) stmfd sp!, {lr} diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 8333400898fb..e554d9e66a1c 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -71,7 +71,7 @@ static int tusb_set_async_mode(unsigned sysclk_ps) gpmc_calc_timings(&t, &tusb_async, &dev_t); - return gpmc_cs_set_timings(async_cs, &t); + return gpmc_cs_set_timings(async_cs, &t, &tusb_async); } static int tusb_set_sync_mode(unsigned sysclk_ps) @@ -98,7 +98,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps) gpmc_calc_timings(&t, &tusb_sync, &dev_t); - return gpmc_cs_set_timings(sync_cs, &t); + return gpmc_cs_set_timings(sync_cs, &t, &tusb_sync); } /* tusb driver calls this when it changes the chip's clocking */ diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h index 0fdf7080e4a6..7e0829682bd0 100644 --- a/arch/arm/mach-omap2/vp.h +++ b/arch/arm/mach-omap2/vp.h @@ -21,15 +21,6 @@ struct voltagedomain; -/* - * Voltage Processor (VP) identifiers - */ -#define OMAP3_VP_VDD_MPU_ID 0 -#define OMAP3_VP_VDD_CORE_ID 1 -#define OMAP4_VP_VDD_CORE_ID 0 -#define OMAP4_VP_VDD_IVA_ID 1 -#define OMAP4_VP_VDD_MPU_ID 2 - /* XXX document */ #define VP_IDLE_TIMEOUT 200 #define VP_TRANXDONE_TIMEOUT 300 diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c index 1914e026245e..b0590fe6ab01 100644 --- a/arch/arm/mach-omap2/vp3xxx_data.c +++ b/arch/arm/mach-omap2/vp3xxx_data.c @@ -28,8 +28,8 @@ #include "prm2xxx_3xxx.h" static const struct omap_vp_ops omap3_vp_ops = { - .check_txdone = omap3_prm_vp_check_txdone, - .clear_txdone = omap3_prm_vp_clear_txdone, + .check_txdone = omap_prm_vp_check_txdone, + .clear_txdone = omap_prm_vp_clear_txdone, }; /* diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c index e62f6b018beb..2448bb9a8716 100644 --- a/arch/arm/mach-omap2/vp44xx_data.c +++ b/arch/arm/mach-omap2/vp44xx_data.c @@ -28,8 +28,8 @@ #include "vp.h" static const struct omap_vp_ops omap4_vp_ops = { - .check_txdone = omap4_prm_vp_check_txdone, - .clear_txdone = omap4_prm_vp_clear_txdone, + .check_txdone = omap_prm_vp_check_txdone, + .clear_txdone = omap_prm_vp_clear_txdone, }; /* diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index 87a12d6930ff..b02f3947be51 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -540,37 +540,33 @@ void __init orion5x_pci_set_cardbus_mode(void) int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys) { - int ret = 0; - vga_base = ORION5X_PCIE_MEM_PHYS_BASE; if (nr == 0) { orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr); - ret = pcie_setup(sys); - } else if (nr == 1 && !orion5x_pci_disabled) { + return pcie_setup(sys); + } + + if (nr == 1 && !orion5x_pci_disabled) { orion5x_pci_set_bus_nr(sys->busnr); - ret = pci_setup(sys); + return pci_setup(sys); } - return ret; + return 0; } struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys) { - struct pci_bus *bus; + if (nr == 0) + return pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys, + &sys->resources); - if (nr == 0) { - bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys, - &sys->resources); - } else if (nr == 1 && !orion5x_pci_disabled) { - bus = pci_scan_root_bus(NULL, sys->busnr, &pci_ops, sys, - &sys->resources); - } else { - bus = NULL; - BUG(); - } + if (nr == 1 && !orion5x_pci_disabled) + return pci_scan_root_bus(NULL, sys->busnr, &pci_ops, sys, + &sys->resources); - return bus; + BUG(); + return NULL; } int __init orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 343c4e3a7c5d..f6d02e4cbcda 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -36,6 +36,7 @@ #include <linux/platform_data/video-pxafb.h> #include <mach/bitfield.h> #include <linux/platform_data/mmc-pxamci.h> +#include <linux/smc91x.h> #include "generic.h" #include "devices.h" @@ -81,11 +82,16 @@ static struct resource smc91x_resources[] = { } }; +static struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_32BIT | SMC91X_USE_DMA | SMC91X_NOWAIT, +}; + static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, + .dev.platform_data = &smc91x_platdata, }; static void idp_backlight_power(int on) diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 0eecd83c624e..89a7c06570d3 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -11,6 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/bitops.h> #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> @@ -40,7 +41,6 @@ #define ICHP_VAL_IRQ (1 << 31) #define ICHP_IRQ(i) (((i) >> 16) & 0x7fff) #define IPR_VALID (1 << 31) -#define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f) #define MAX_INTERNAL_IRQS 128 @@ -51,6 +51,7 @@ static void __iomem *pxa_irq_base; static int pxa_internal_irq_nr; static bool cpu_has_ipr; +static struct irq_domain *pxa_irq_domain; static inline void __iomem *irq_base(int i) { @@ -66,18 +67,20 @@ static inline void __iomem *irq_base(int i) void pxa_mask_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); + irq_hw_number_t irq = irqd_to_hwirq(d); uint32_t icmr = __raw_readl(base + ICMR); - icmr &= ~(1 << IRQ_BIT(d->irq)); + icmr &= ~BIT(irq & 0x1f); __raw_writel(icmr, base + ICMR); } void pxa_unmask_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); + irq_hw_number_t irq = irqd_to_hwirq(d); uint32_t icmr = __raw_readl(base + ICMR); - icmr |= 1 << IRQ_BIT(d->irq); + icmr |= BIT(irq & 0x1f); __raw_writel(icmr, base + ICMR); } @@ -118,40 +121,63 @@ asmlinkage void __exception_irq_entry ichp_handle_irq(struct pt_regs *regs) } while (1); } -void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int)) +static int pxa_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) { - int irq, i, n; + void __iomem *base = irq_base(hw / 32); - BUG_ON(irq_nr > MAX_INTERNAL_IRQS); + /* initialize interrupt priority */ + if (cpu_has_ipr) + __raw_writel(hw | IPR_VALID, pxa_irq_base + IPR(hw)); + + irq_set_chip_and_handler(virq, &pxa_internal_irq_chip, + handle_level_irq); + irq_set_chip_data(virq, base); + set_irq_flags(virq, IRQF_VALID); + + return 0; +} + +static struct irq_domain_ops pxa_irq_ops = { + .map = pxa_irq_map, + .xlate = irq_domain_xlate_onecell, +}; + +static __init void +pxa_init_irq_common(struct device_node *node, int irq_nr, + int (*fn)(struct irq_data *, unsigned int)) +{ + int n; pxa_internal_irq_nr = irq_nr; - cpu_has_ipr = !cpu_is_pxa25x(); - pxa_irq_base = io_p2v(0x40d00000); + pxa_irq_domain = irq_domain_add_legacy(node, irq_nr, + PXA_IRQ(0), 0, + &pxa_irq_ops, NULL); + if (!pxa_irq_domain) + panic("Unable to add PXA IRQ domain\n"); + irq_set_default_host(pxa_irq_domain); for (n = 0; n < irq_nr; n += 32) { void __iomem *base = irq_base(n >> 5); __raw_writel(0, base + ICMR); /* disable all IRQs */ __raw_writel(0, base + ICLR); /* all IRQs are IRQ, not FIQ */ - for (i = n; (i < (n + 32)) && (i < irq_nr); i++) { - /* initialize interrupt priority */ - if (cpu_has_ipr) - __raw_writel(i | IPR_VALID, pxa_irq_base + IPR(i)); - - irq = PXA_IRQ(i); - irq_set_chip_and_handler(irq, &pxa_internal_irq_chip, - handle_level_irq); - irq_set_chip_data(irq, base); - set_irq_flags(irq, IRQF_VALID); - } } - /* only unmasked interrupts kick us out of idle */ __raw_writel(1, irq_base(0) + ICCR); pxa_internal_irq_chip.irq_set_wake = fn; } +void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int)) +{ + BUG_ON(irq_nr > MAX_INTERNAL_IRQS); + + pxa_irq_base = io_p2v(0x40d00000); + cpu_has_ipr = !cpu_is_pxa25x(); + pxa_init_irq_common(NULL, irq_nr, fn); +} + #ifdef CONFIG_PM static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32]; static unsigned long saved_ipr[MAX_INTERNAL_IRQS]; @@ -203,30 +229,6 @@ struct syscore_ops pxa_irq_syscore_ops = { }; #ifdef CONFIG_OF -static struct irq_domain *pxa_irq_domain; - -static int pxa_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - void __iomem *base = irq_base(hw / 32); - - /* initialize interrupt priority */ - if (cpu_has_ipr) - __raw_writel(hw | IPR_VALID, pxa_irq_base + IPR(hw)); - - irq_set_chip_and_handler(hw, &pxa_internal_irq_chip, - handle_level_irq); - irq_set_chip_data(hw, base); - set_irq_flags(hw, IRQF_VALID); - - return 0; -} - -static struct irq_domain_ops pxa_irq_ops = { - .map = pxa_irq_map, - .xlate = irq_domain_xlate_onecell, -}; - static const struct of_device_id intc_ids[] __initconst = { { .compatible = "marvell,pxa-intc", }, {} @@ -236,7 +238,7 @@ void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)) { struct device_node *node; struct resource res; - int n, ret; + int ret; node = of_find_matching_node(NULL, intc_ids); if (!node) { @@ -267,23 +269,6 @@ void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)) return; } - pxa_irq_domain = irq_domain_add_legacy(node, pxa_internal_irq_nr, 0, 0, - &pxa_irq_ops, NULL); - if (!pxa_irq_domain) - panic("Unable to add PXA IRQ domain\n"); - - irq_set_default_host(pxa_irq_domain); - - for (n = 0; n < pxa_internal_irq_nr; n += 32) { - void __iomem *base = irq_base(n >> 5); - - __raw_writel(0, base + ICMR); /* disable all IRQs */ - __raw_writel(0, base + ICLR); /* all IRQs are IRQ, not FIQ */ - } - - /* only unmasked interrupts kick us out of idle */ - __raw_writel(1, irq_base(0) + ICCR); - - pxa_internal_irq_chip.irq_set_wake = fn; + pxa_init_irq_common(node, pxa_internal_irq_nr, fn); } #endif /* CONFIG_OF */ diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index ad777b353bd5..eaee2c20b189 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -24,6 +24,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/pwm_backlight.h> +#include <linux/smc91x.h> #include <asm/types.h> #include <asm/setup.h> @@ -189,15 +190,20 @@ static struct resource smc91x_resources[] = { [1] = { .start = LPD270_ETHERNET_IRQ, .end = LPD270_ETHERNET_IRQ, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; +struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, +}; + static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, + .dev.platform_data = &smc91x_platdata, }; static struct resource lpd270_flash_resources[] = { diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index a762b23ac830..6dc4f025e674 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -758,8 +758,10 @@ static void raumfeld_power_signal_charged(void) struct power_supply *psy = power_supply_get_by_name(raumfeld_power_supplicants[0]); - if (psy) + if (psy) { power_supply_set_battery_charged(psy); + power_supply_put(psy); + } } static int raumfeld_power_resume(void) diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 205f9bf3821e..ac2ae5c71ab4 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -412,7 +412,7 @@ static struct fixed_voltage_config can_regulator_pdata = { }; static struct platform_device can_regulator_device = { - .name = "reg-fixed-volage", + .name = "reg-fixed-voltage", .id = 0, .dev = { .platform_data = &can_regulator_pdata, diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index 48003ea652b9..2256cd1e25d1 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -22,7 +22,4 @@ config ARCH_MSM8974 bool "Enable support for MSM8974" select HAVE_ARM_ARCH_TIMER -config QCOM_SCM - bool - endif diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile index 8f756ae1ae31..e324375fa919 100644 --- a/arch/arm/mach-qcom/Makefile +++ b/arch/arm/mach-qcom/Makefile @@ -1,5 +1,2 @@ obj-y := board.o obj-$(CONFIG_SMP) += platsmp.o -obj-$(CONFIG_QCOM_SCM) += scm.o scm-boot.o - -CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c index 09cffed4c0a4..5cde63a64b34 100644 --- a/arch/arm/mach-qcom/platsmp.c +++ b/arch/arm/mach-qcom/platsmp.c @@ -17,10 +17,10 @@ #include <linux/of_address.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/qcom_scm.h> #include <asm/smp_plat.h> -#include "scm-boot.h" #define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x35a0 #define SCSS_CPU1CORE_RESET 0x2d80 @@ -319,25 +319,10 @@ static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle) static void __init qcom_smp_prepare_cpus(unsigned int max_cpus) { - int cpu, map; - unsigned int flags = 0; - static const int cold_boot_flags[] = { - 0, - SCM_FLAG_COLDBOOT_CPU1, - SCM_FLAG_COLDBOOT_CPU2, - SCM_FLAG_COLDBOOT_CPU3, - }; - - for_each_present_cpu(cpu) { - map = cpu_logical_map(cpu); - if (WARN_ON(map >= ARRAY_SIZE(cold_boot_flags))) { - set_cpu_present(cpu, false); - continue; - } - flags |= cold_boot_flags[map]; - } + int cpu; - if (scm_set_boot_addr(virt_to_phys(secondary_startup_arm), flags)) { + if (qcom_scm_set_cold_boot_addr(secondary_startup_arm, + cpu_present_mask)) { for_each_present_cpu(cpu) { if (cpu == smp_processor_id()) continue; diff --git a/arch/arm/mach-qcom/scm-boot.c b/arch/arm/mach-qcom/scm-boot.c deleted file mode 100644 index e8ff7beb6218..000000000000 --- a/arch/arm/mach-qcom/scm-boot.c +++ /dev/null @@ -1,39 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#include <linux/module.h> -#include <linux/slab.h> - -#include "scm.h" -#include "scm-boot.h" - -/* - * Set the cold/warm boot address for one of the CPU cores. - */ -int scm_set_boot_addr(u32 addr, int flags) -{ - struct { - __le32 flags; - __le32 addr; - } cmd; - - cmd.addr = cpu_to_le32(addr); - cmd.flags = cpu_to_le32(flags); - return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR, - &cmd, sizeof(cmd), NULL, 0); -} -EXPORT_SYMBOL(scm_set_boot_addr); diff --git a/arch/arm/mach-qcom/scm-boot.h b/arch/arm/mach-qcom/scm-boot.h deleted file mode 100644 index 3e210fb818bb..000000000000 --- a/arch/arm/mach-qcom/scm-boot.h +++ /dev/null @@ -1,26 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __MACH_SCM_BOOT_H -#define __MACH_SCM_BOOT_H - -#define SCM_BOOT_ADDR 0x1 -#define SCM_FLAG_COLDBOOT_CPU1 0x01 -#define SCM_FLAG_COLDBOOT_CPU2 0x08 -#define SCM_FLAG_COLDBOOT_CPU3 0x20 -#define SCM_FLAG_WARMBOOT_CPU0 0x04 -#define SCM_FLAG_WARMBOOT_CPU1 0x02 -#define SCM_FLAG_WARMBOOT_CPU2 0x10 -#define SCM_FLAG_WARMBOOT_CPU3 0x40 - -int scm_set_boot_addr(u32 addr, int flags); - -#endif diff --git a/arch/arm/mach-qcom/scm.c b/arch/arm/mach-qcom/scm.c deleted file mode 100644 index 1d9cf18c7091..000000000000 --- a/arch/arm/mach-qcom/scm.c +++ /dev/null @@ -1,326 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#include <linux/slab.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/errno.h> -#include <linux/err.h> - -#include <asm/outercache.h> -#include <asm/cacheflush.h> - -#include "scm.h" - -#define SCM_ENOMEM -5 -#define SCM_EOPNOTSUPP -4 -#define SCM_EINVAL_ADDR -3 -#define SCM_EINVAL_ARG -2 -#define SCM_ERROR -1 -#define SCM_INTERRUPTED 1 - -static DEFINE_MUTEX(scm_lock); - -/** - * struct scm_command - one SCM command buffer - * @len: total available memory for command and response - * @buf_offset: start of command buffer - * @resp_hdr_offset: start of response buffer - * @id: command to be executed - * @buf: buffer returned from scm_get_command_buffer() - * - * An SCM command is laid out in memory as follows: - * - * ------------------- <--- struct scm_command - * | command header | - * ------------------- <--- scm_get_command_buffer() - * | command buffer | - * ------------------- <--- struct scm_response and - * | response header | scm_command_to_response() - * ------------------- <--- scm_get_response_buffer() - * | response buffer | - * ------------------- - * - * There can be arbitrary padding between the headers and buffers so - * you should always use the appropriate scm_get_*_buffer() routines - * to access the buffers in a safe manner. - */ -struct scm_command { - __le32 len; - __le32 buf_offset; - __le32 resp_hdr_offset; - __le32 id; - __le32 buf[0]; -}; - -/** - * struct scm_response - one SCM response buffer - * @len: total available memory for response - * @buf_offset: start of response data relative to start of scm_response - * @is_complete: indicates if the command has finished processing - */ -struct scm_response { - __le32 len; - __le32 buf_offset; - __le32 is_complete; -}; - -/** - * alloc_scm_command() - Allocate an SCM command - * @cmd_size: size of the command buffer - * @resp_size: size of the response buffer - * - * Allocate an SCM command, including enough room for the command - * and response headers as well as the command and response buffers. - * - * Returns a valid &scm_command on success or %NULL if the allocation fails. - */ -static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size) -{ - struct scm_command *cmd; - size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size + - resp_size; - u32 offset; - - cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL); - if (cmd) { - cmd->len = cpu_to_le32(len); - offset = offsetof(struct scm_command, buf); - cmd->buf_offset = cpu_to_le32(offset); - cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size); - } - return cmd; -} - -/** - * free_scm_command() - Free an SCM command - * @cmd: command to free - * - * Free an SCM command. - */ -static inline void free_scm_command(struct scm_command *cmd) -{ - kfree(cmd); -} - -/** - * scm_command_to_response() - Get a pointer to a scm_response - * @cmd: command - * - * Returns a pointer to a response for a command. - */ -static inline struct scm_response *scm_command_to_response( - const struct scm_command *cmd) -{ - return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset); -} - -/** - * scm_get_command_buffer() - Get a pointer to a command buffer - * @cmd: command - * - * Returns a pointer to the command buffer of a command. - */ -static inline void *scm_get_command_buffer(const struct scm_command *cmd) -{ - return (void *)cmd->buf; -} - -/** - * scm_get_response_buffer() - Get a pointer to a response buffer - * @rsp: response - * - * Returns a pointer to a response buffer of a response. - */ -static inline void *scm_get_response_buffer(const struct scm_response *rsp) -{ - return (void *)rsp + le32_to_cpu(rsp->buf_offset); -} - -static int scm_remap_error(int err) -{ - pr_err("scm_call failed with error code %d\n", err); - switch (err) { - case SCM_ERROR: - return -EIO; - case SCM_EINVAL_ADDR: - case SCM_EINVAL_ARG: - return -EINVAL; - case SCM_EOPNOTSUPP: - return -EOPNOTSUPP; - case SCM_ENOMEM: - return -ENOMEM; - } - return -EINVAL; -} - -static u32 smc(u32 cmd_addr) -{ - int context_id; - register u32 r0 asm("r0") = 1; - register u32 r1 asm("r1") = (u32)&context_id; - register u32 r2 asm("r2") = cmd_addr; - do { - asm volatile( - __asmeq("%0", "r0") - __asmeq("%1", "r0") - __asmeq("%2", "r1") - __asmeq("%3", "r2") -#ifdef REQUIRES_SEC - ".arch_extension sec\n" -#endif - "smc #0 @ switch to secure world\n" - : "=r" (r0) - : "r" (r0), "r" (r1), "r" (r2) - : "r3"); - } while (r0 == SCM_INTERRUPTED); - - return r0; -} - -static int __scm_call(const struct scm_command *cmd) -{ - int ret; - u32 cmd_addr = virt_to_phys(cmd); - - /* - * Flush the command buffer so that the secure world sees - * the correct data. - */ - __cpuc_flush_dcache_area((void *)cmd, cmd->len); - outer_flush_range(cmd_addr, cmd_addr + cmd->len); - - ret = smc(cmd_addr); - if (ret < 0) - ret = scm_remap_error(ret); - - return ret; -} - -static void scm_inv_range(unsigned long start, unsigned long end) -{ - u32 cacheline_size, ctr; - - asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr)); - cacheline_size = 4 << ((ctr >> 16) & 0xf); - - start = round_down(start, cacheline_size); - end = round_up(end, cacheline_size); - outer_inv_range(start, end); - while (start < end) { - asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start) - : "memory"); - start += cacheline_size; - } - dsb(); - isb(); -} - -/** - * scm_call() - Send an SCM command - * @svc_id: service identifier - * @cmd_id: command identifier - * @cmd_buf: command buffer - * @cmd_len: length of the command buffer - * @resp_buf: response buffer - * @resp_len: length of the response buffer - * - * Sends a command to the SCM and waits for the command to finish processing. - * - * A note on cache maintenance: - * Note that any buffers that are expected to be accessed by the secure world - * must be flushed before invoking scm_call and invalidated in the cache - * immediately after scm_call returns. Cache maintenance on the command and - * response buffers is taken care of by scm_call; however, callers are - * responsible for any other cached buffers passed over to the secure world. - */ -int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len, - void *resp_buf, size_t resp_len) -{ - int ret; - struct scm_command *cmd; - struct scm_response *rsp; - unsigned long start, end; - - cmd = alloc_scm_command(cmd_len, resp_len); - if (!cmd) - return -ENOMEM; - - cmd->id = cpu_to_le32((svc_id << 10) | cmd_id); - if (cmd_buf) - memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len); - - mutex_lock(&scm_lock); - ret = __scm_call(cmd); - mutex_unlock(&scm_lock); - if (ret) - goto out; - - rsp = scm_command_to_response(cmd); - start = (unsigned long)rsp; - - do { - scm_inv_range(start, start + sizeof(*rsp)); - } while (!rsp->is_complete); - - end = (unsigned long)scm_get_response_buffer(rsp) + resp_len; - scm_inv_range(start, end); - - if (resp_buf) - memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len); -out: - free_scm_command(cmd); - return ret; -} -EXPORT_SYMBOL(scm_call); - -u32 scm_get_version(void) -{ - int context_id; - static u32 version = -1; - register u32 r0 asm("r0"); - register u32 r1 asm("r1"); - - if (version != -1) - return version; - - mutex_lock(&scm_lock); - - r0 = 0x1 << 8; - r1 = (u32)&context_id; - do { - asm volatile( - __asmeq("%0", "r0") - __asmeq("%1", "r1") - __asmeq("%2", "r0") - __asmeq("%3", "r1") -#ifdef REQUIRES_SEC - ".arch_extension sec\n" -#endif - "smc #0 @ switch to secure world\n" - : "=r" (r0), "=r" (r1) - : "r" (r0), "r" (r1) - : "r2", "r3"); - } while (r0 == SCM_INTERRUPTED); - - version = r1; - mutex_unlock(&scm_lock); - - return version; -} -EXPORT_SYMBOL(scm_get_version); diff --git a/arch/arm/mach-qcom/scm.h b/arch/arm/mach-qcom/scm.h deleted file mode 100644 index 00b31ea58f29..000000000000 --- a/arch/arm/mach-qcom/scm.h +++ /dev/null @@ -1,25 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __MACH_SCM_H -#define __MACH_SCM_H - -#define SCM_SVC_BOOT 0x1 -#define SCM_SVC_PIL 0x2 - -extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len, - void *resp_buf, size_t resp_len); - -#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF)) - -extern u32 scm_get_version(void); - -#endif diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 850e506926df..c309593abdb2 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -28,6 +28,7 @@ #include <linux/platform_data/video-clcd-versatile.h> #include <linux/io.h> #include <linux/smsc911x.h> +#include <linux/smc91x.h> #include <linux/ata_platform.h> #include <linux/amba/mmci.h> #include <linux/gfp.h> @@ -94,6 +95,10 @@ static struct smsc911x_platform_config smsc911x_config = { .phy_interface = PHY_INTERFACE_MODE_MII, }; +static struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT, +}; + static struct platform_device realview_eth_device = { .name = "smsc911x", .id = 0, @@ -107,6 +112,8 @@ int realview_eth_register(const char *name, struct resource *res) realview_eth_device.resource = res; if (strcmp(realview_eth_device.name, "smsc911x") == 0) realview_eth_device.dev.platform_data = &smsc911x_config; + else + realview_eth_device.dev.platform_data = &smc91x_platdata; return platform_device_register(&realview_eth_device); } diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 64c88d657f9e..b3869cbbcc68 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -234,7 +234,7 @@ static struct resource realview_eb_eth_resources[] = { [1] = { .start = IRQ_EB_ETH, .end = IRQ_EB_ETH, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index f26fcdca2445..5b4ca3c3c879 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -55,7 +55,7 @@ static int pmu_power_domain_is_on(int pd) return !(val & BIT(pd)); } -struct reset_control *rockchip_get_core_reset(int cpu) +static struct reset_control *rockchip_get_core_reset(int cpu) { struct device *dev = get_cpu_device(cpu); struct device_node *np; @@ -201,7 +201,7 @@ static int __init rockchip_smp_prepare_sram(struct device_node *node) return 0; } -static struct regmap_config rockchip_pmu_regmap_config = { +static const struct regmap_config rockchip_pmu_regmap_config = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c index 50cb781aaa36..b07d88602073 100644 --- a/arch/arm/mach-rockchip/pm.c +++ b/arch/arm/mach-rockchip/pm.c @@ -75,9 +75,13 @@ static void rk3288_slp_mode_set(int level) regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON, &rk3288_pmu_pwr_mode_con); - /* set bit 8 so that system will resume to FAST_BOOT_ADDR */ + /* + * SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR + * PCLK_WDT_GATE - disable WDT during suspend. + */ regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0, - SGRF_FAST_BOOT_EN | SGRF_FAST_BOOT_EN_WRITE); + SGRF_PCLK_WDT_GATE | SGRF_FAST_BOOT_EN + | SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE); /* booting address of resuming system is from this register value */ regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR, @@ -122,7 +126,8 @@ static void rk3288_slp_mode_set_resume(void) rk3288_pmu_pwr_mode_con); regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0, - rk3288_sgrf_soc_con0 | SGRF_FAST_BOOT_EN_WRITE); + rk3288_sgrf_soc_con0 | SGRF_PCLK_WDT_GATE_WRITE + | SGRF_FAST_BOOT_EN_WRITE); } static int rockchip_lpmode_enter(unsigned long arg) @@ -209,6 +214,9 @@ static int rk3288_suspend_init(struct device_node *np) memcpy(rk3288_bootram_base, rockchip_slp_cpu_resume, rk3288_bootram_sz); + regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, OSC_STABL_CNT_THRESH); + regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, PMU_STABL_CNT_THRESH); + return 0; } diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h index 7c889c04604b..03ff31d8282d 100644 --- a/arch/arm/mach-rockchip/pm.h +++ b/arch/arm/mach-rockchip/pm.h @@ -50,6 +50,8 @@ static inline void rockchip_suspend_init(void) #define RK3288_SGRF_SOC_CON0 (0x0000) #define RK3288_SGRF_FAST_BOOT_ADDR (0x0120) +#define SGRF_PCLK_WDT_GATE BIT(6) +#define SGRF_PCLK_WDT_GATE_WRITE BIT(22) #define SGRF_FAST_BOOT_EN BIT(8) #define SGRF_FAST_BOOT_EN_WRITE BIT(24) @@ -63,6 +65,10 @@ static inline void rockchip_suspend_init(void) /* PMU_WAKEUP_CFG1 bits */ #define PMU_ARMINT_WAKEUP_EN BIT(0) +/* wait 30ms for OSC stable and 30ms for pmic stable */ +#define OSC_STABL_CNT_THRESH (32 * 30) +#define PMU_STABL_CNT_THRESH (32 * 30) + enum rk3288_pwr_mode_con { PMU_PWR_MODE_EN = 0, PMU_CLK_CORE_SRC_GATE_EN, diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 79c49ff77f6e..23bec3a85b22 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -39,14 +39,14 @@ config CPU_S3C2412 bool "SAMSUNG S3C2412" select CPU_ARM926T select S3C2412_COMMON_CLK - select S3C2412_PM if PM + select S3C2412_PM if PM_SLEEP help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line config CPU_S3C2416 bool "SAMSUNG S3C2416/S3C2450" select CPU_ARM926T - select S3C2416_PM if PM + select S3C2416_PM if PM_SLEEP select S3C2443_COMMON_CLK help Support for the S3C2416 SoC from the S3C24XX line @@ -55,7 +55,7 @@ config CPU_S3C2440 bool "SAMSUNG S3C2440" select CPU_ARM920T select S3C2410_COMMON_CLK - select S3C2410_PM if PM + select S3C2410_PM if PM_SLEEP help Support for S3C2440 Samsung Mobile CPU based systems. @@ -63,7 +63,7 @@ config CPU_S3C2442 bool "SAMSUNG S3C2442" select CPU_ARM920T select S3C2410_COMMON_CLK - select S3C2410_PM if PM + select S3C2410_PM if PM_SLEEP help Support for S3C2442 Samsung Mobile CPU based systems. @@ -228,11 +228,6 @@ config H1940BT This is a simple driver that is able to control the state of built in bluetooth chip on h1940. -config PM_H1940 - bool - help - Internal node for H1940 and related PM - config MACH_N30 bool "Acer N30 family" select S3C_DEV_NAND @@ -362,6 +357,7 @@ if CPU_S3C2416 config S3C2416_PM bool select S3C2412_PM_SLEEP + select SAMSUNG_WAKEMASK help Internal config node to apply S3C2416 power management @@ -584,6 +580,11 @@ config MACH_SMDK2443 endif # CPU_S3C2443 +config PM_H1940 + bool + help + Internal node for H1940 and related PM + endmenu # SAMSUNG S3C24XX SoCs Support endif # ARCH_S3C24XX diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index b40a22fe082a..05920c8a5764 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -32,7 +32,8 @@ obj-$(CONFIG_CPU_S3C2443) += s3c2443.o # PM -obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o +obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM_SLEEP) += irq-pm.o sleep.o # common code diff --git a/arch/arm/mach-s3c24xx/include/mach/pm-core.h b/arch/arm/mach-s3c24xx/include/mach/pm-core.h index 2eef7e6f7675..69459dbbdcad 100644 --- a/arch/arm/mach-s3c24xx/include/mach/pm-core.h +++ b/arch/arm/mach-s3c24xx/include/mach/pm-core.h @@ -10,6 +10,11 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/delay.h> +#include <linux/io.h> + +#include "regs-clock.h" +#include "regs-irq.h" static inline void s3c_pm_debug_init_uart(void) { @@ -42,8 +47,23 @@ static inline void s3c_pm_arch_stop_clocks(void) __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */ } -static void s3c_pm_show_resume_irqs(int start, unsigned long which, - unsigned long mask); +/* s3c2410_pm_show_resume_irqs + * + * print any IRQs asserted at resume time (ie, we woke from) +*/ +static inline void s3c_pm_show_resume_irqs(int start, unsigned long which, + unsigned long mask) +{ + int i; + + which &= ~mask; + + for (i = 0; i <= 31; i++) { + if (which & (1L<<i)) { + S3C_PMDBG("IRQ %d asserted at resume\n", start+i); + } + } +} static inline void s3c_pm_arch_show_resume_irqs(void) { diff --git a/arch/arm/mach-s3c24xx/pm-s3c2416.c b/arch/arm/mach-s3c24xx/pm-s3c2416.c index 44923895f558..c0e328e37bd6 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2416.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2416.c @@ -23,6 +23,7 @@ #include "s3c2412-power.h" +#ifdef CONFIG_PM_SLEEP extern void s3c2412_sleep_enter(void); static int s3c2416_cpu_suspend(unsigned long arg) @@ -70,7 +71,7 @@ static __init int s3c2416_pm_init(void) } arch_initcall(s3c2416_pm_init); - +#endif static void s3c2416_pm_resume(void) { diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c index b19256ec8d40..5d510bca0844 100644 --- a/arch/arm/mach-s3c24xx/pm.c +++ b/arch/arm/mach-s3c24xx/pm.c @@ -50,6 +50,7 @@ #define PFX "s3c24xx-pm: " +#ifdef CONFIG_PM_SLEEP static struct sleep_save core_save[] = { /* we restore the timings here, with the proviso that the board * brings the system up in an slower, or equal frequency setting @@ -67,6 +68,7 @@ static struct sleep_save core_save[] = { SAVE_ITEM(S3C2410_BANKCON4), SAVE_ITEM(S3C2410_BANKCON5), }; +#endif /* s3c_pm_check_resume_pin * @@ -121,7 +123,7 @@ void s3c_pm_configure_extint(void) } } - +#ifdef CONFIG_PM_SLEEP void s3c_pm_restore_core(void) { s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); @@ -131,4 +133,4 @@ void s3c_pm_save_core(void) { s3c_pm_do_save(core_save, ARRAY_SIZE(core_save)); } - +#endif diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index 2a6985a4a0ff..5061d66ca10c 100644 --- a/arch/arm/mach-s3c24xx/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c @@ -121,7 +121,7 @@ int __init s3c2410_init(void) { printk("S3C2410: Initialising architecture\n"); -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP register_syscore_ops(&s3c2410_pm_syscore_ops); register_syscore_ops(&s3c24xx_irq_syscore_ops); #endif diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index ecf2c77ab88b..64a13605cfc3 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -172,7 +172,7 @@ int __init s3c2412_init(void) { printk("S3C2412: Initialising architecture\n"); -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP register_syscore_ops(&s3c2412_pm_syscore_ops); register_syscore_ops(&s3c24xx_irq_syscore_ops); #endif diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index bfd4da86deb8..3f8ca2a3ef17 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -98,7 +98,7 @@ int __init s3c2416_init(void) s3c_adc_setname("s3c2416-adc"); s3c_rtc_setname("s3c2416-rtc"); -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP register_syscore_ops(&s3c2416_pm_syscore_ops); register_syscore_ops(&s3c24xx_irq_syscore_ops); register_syscore_ops(&s3c2416_irq_syscore_ops); diff --git a/arch/arm/mach-s3c24xx/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c index 03d379f1fc52..eb733555fab5 100644 --- a/arch/arm/mach-s3c24xx/s3c2440.c +++ b/arch/arm/mach-s3c24xx/s3c2440.c @@ -57,11 +57,11 @@ int __init s3c2440_init(void) /* register suspend/resume handlers */ -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP register_syscore_ops(&s3c2410_pm_syscore_ops); register_syscore_ops(&s3c24xx_irq_syscore_ops); -#endif register_syscore_ops(&s3c244x_pm_syscore_ops); +#endif /* register our system device for everything else */ diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c index 7b043349f1c8..893998ede022 100644 --- a/arch/arm/mach-s3c24xx/s3c2442.c +++ b/arch/arm/mach-s3c24xx/s3c2442.c @@ -60,11 +60,11 @@ int __init s3c2442_init(void) { printk("S3C2442: Initialising architecture\n"); -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP register_syscore_ops(&s3c2410_pm_syscore_ops); register_syscore_ops(&s3c24xx_irq_syscore_ops); -#endif register_syscore_ops(&s3c244x_pm_syscore_ops); +#endif return device_register(&s3c2442_dev); } diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index 177f97802745..b14119585dc7 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -108,7 +108,7 @@ static int __init s3c2442_core_init(void) core_initcall(s3c2442_core_init); -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static struct sleep_save s3c244x_sleep[] = { SAVE_ITEM(S3C2440_DSC0), SAVE_ITEM(S3C2440_DSC1), @@ -127,12 +127,9 @@ static void s3c244x_resume(void) { s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); } -#else -#define s3c244x_suspend NULL -#define s3c244x_resume NULL -#endif struct syscore_ops s3c244x_pm_syscore_ops = { .suspend = s3c244x_suspend, .resume = s3c244x_resume, }; +#endif diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 26ca2427e53d..eff95e950d81 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -189,6 +189,7 @@ endchoice config SMDK6410_WM1190_EV1 bool "Support Wolfson Microelectronics 1190-EV1 PMIC card" depends on MACH_SMDK6410 + depends on I2C=y select MFD_WM8350_I2C select REGULATOR select REGULATOR_WM8350 @@ -203,6 +204,7 @@ config SMDK6410_WM1190_EV1 config SMDK6410_WM1192_EV1 bool "Support Wolfson Microelectronics 1192-EV1 PMIC card" depends on MACH_SMDK6410 + depends on I2C=y select MFD_WM831X select MFD_WM831X_I2C select REGULATOR @@ -269,8 +271,8 @@ config MACH_SMARTQ7 config MACH_WLF_CRAGG_6410 bool "Wolfson Cragganmore 6410" + depends on I2C=y select CPU_S3C6410 - select I2C select LEDS_GPIO_REGISTER select S3C64XX_DEV_SPI0 select S3C64XX_SETUP_FB_24BPP diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 12f67b61ca5f..17f4b07ec763 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -16,7 +16,8 @@ obj-$(CONFIG_CPU_S3C6410) += s3c6410.o # PM -obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o +obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM_SLEEP) += irq-pm.o sleep.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o # DMA support diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c index 2eb072440dfa..93aa8cb70195 100644 --- a/arch/arm/mach-s3c64xx/cpuidle.c +++ b/arch/arm/mach-s3c64xx/cpuidle.c @@ -16,7 +16,7 @@ #include <linux/export.h> #include <linux/time.h> -#include <asm/proc-fns.h> +#include <asm/cpuidle.h> #include <mach/map.h> diff --git a/arch/arm/mach-s3c64xx/crag6410.h b/arch/arm/mach-s3c64xx/crag6410.h index 7bc66682687e..dcbe17f5e5f8 100644 --- a/arch/arm/mach-s3c64xx/crag6410.h +++ b/arch/arm/mach-s3c64xx/crag6410.h @@ -14,6 +14,7 @@ #include <mach/gpio-samsung.h> #define GLENFARCLAS_PMIC_IRQ_BASE IRQ_BOARD_START +#define BANFF_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) #define PCA935X_GPIO_BASE GPIO_BOARD_START #define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 10b913baab28..65c426bc45f7 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -554,6 +554,7 @@ static struct wm831x_touch_pdata touch_pdata = { static struct wm831x_pdata crag_pmic_pdata = { .wm831x_num = 1, + .irq_base = BANFF_PMIC_IRQ_BASE, .gpio_base = BANFF_PMIC_GPIO_BASE, .soft_shutdown = true, diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 661eb662d051..b7447a92276e 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -209,7 +209,7 @@ static struct platform_device smdk6410_smsc911x = { }; #ifdef CONFIG_REGULATOR -static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] __initdata = { +static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = { REGULATOR_SUPPLY("PVDD", "0-001b"), REGULATOR_SUPPLY("AVDD", "0-001b"), }; diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index aaf7bea4032f..75b14e756383 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -194,6 +194,7 @@ void s3c_pm_debug_smdkled(u32 set, u32 clear) } #endif +#ifdef CONFIG_PM_SLEEP static struct sleep_save core_save[] = { SAVE_ITEM(S3C64XX_MEM0DRVCON), SAVE_ITEM(S3C64XX_MEM1DRVCON), @@ -238,6 +239,7 @@ void s3c_pm_save_core(void) s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); s3c_pm_do_save(core_save, ARRAY_SIZE(core_save)); } +#endif /* since both s3c6400 and s3c6410 share the same sleep pm calls, we * put the per-cpu code in here until any new cpu comes along and changes diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S index 7c43ddd33ba8..dfbfc0f7f8b8 100644 --- a/arch/arm/mach-s5pv210/sleep.S +++ b/arch/arm/mach-s5pv210/sleep.S @@ -14,7 +14,7 @@ #include <linux/linkage.h> - .data + .text .align /* diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 169262e3040d..af868d258e66 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -12,6 +12,7 @@ #include <linux/pm.h> #include <linux/serial_core.h> #include <linux/slab.h> +#include <linux/smc91x.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -258,12 +259,17 @@ static int neponset_probe(struct platform_device *dev) 0x02000000, "smc91x-attrib"), { .flags = IORESOURCE_IRQ }, }; + struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_8BIT | SMC91X_IO_SHIFT_2 | SMC91X_NOWAIT, + }; struct platform_device_info smc91x_devinfo = { .parent = &dev->dev, .name = "smc91x", .id = 0, .res = smc91x_resources, .num_res = ARRAY_SIZE(smc91x_resources), + .data = &smc91x_platdata, + .size_data = sizeof(smc91x_platdata), }; int ret, irq; diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 091261878eff..1525d7b5f1b7 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -11,6 +11,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/mtd/partitions.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/setup.h> @@ -43,12 +44,18 @@ static struct resource smc91x_resources[] = { #endif }; +static struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, +}; static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, + .dev = { + .platform_data = &smc91x_platdata, + }, }; static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 2f36c85eec4b..0fb484221c90 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -62,6 +62,10 @@ config ARCH_R8A7740 select ARCH_RMOBILE select RENESAS_INTC_IRQPIN +config ARCH_R8A7778 + bool "R-Car M1A (R8A77781)" + select ARCH_RCAR_GEN1 + config ARCH_R8A7779 bool "R-Car H1 (R8A77790)" select ARCH_RCAR_GEN1 @@ -69,15 +73,22 @@ config ARCH_R8A7779 config ARCH_R8A7790 bool "R-Car H2 (R8A77900)" select ARCH_RCAR_GEN2 + select I2C config ARCH_R8A7791 bool "R-Car M2-W (R8A77910)" select ARCH_RCAR_GEN2 + select I2C config ARCH_R8A7794 bool "R-Car E2 (R8A77940)" select ARCH_RCAR_GEN2 +config ARCH_SH73A0 + bool "SH-Mobile AG5 (R8A73A00)" + select ARCH_RMOBILE + select RENESAS_INTC_IRQPIN + comment "Renesas ARM SoCs Board Type" config MACH_MARZEN @@ -92,13 +103,6 @@ if ARCH_SHMOBILE_LEGACY comment "Renesas ARM SoCs System Type" -config ARCH_SH7372 - bool "SH-Mobile AP4 (SH7372)" - select ARCH_RMOBILE - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_CPU_SUSPEND if PM || CPU_IDLE - select SH_INTC - config ARCH_SH73A0 bool "SH-Mobile AG5 (R8A73A00)" select ARCH_RMOBILE @@ -108,13 +112,6 @@ config ARCH_SH73A0 select SH_INTC select RENESAS_INTC_IRQPIN -config ARCH_R8A73A4 - bool "R-Mobile APE6 (R8A73A40)" - select ARCH_RMOBILE - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_GIC - select RENESAS_IRQC - config ARCH_R8A7740 bool "R-Mobile A1 (R8A77400)" select ARCH_RMOBILE @@ -136,33 +133,6 @@ config ARCH_R8A7779 comment "Renesas ARM SoCs Board Type" -config MACH_APE6EVM - bool "APE6EVM board" - depends on ARCH_R8A73A4 - select SMSC_PHY if SMSC911X - select USE_OF - -config MACH_APE6EVM_REFERENCE - bool "APE6EVM board - Reference Device Tree Implementation" - depends on ARCH_R8A73A4 - select SMSC_PHY if SMSC911X - select USE_OF - ---help--- - Use reference implementation of APE6EVM board support - which makes a greater use of device tree at the expense - of not supporting a number of devices. - - This is intended to aid developers - -config MACH_MACKEREL - bool "mackerel board" - depends on ARCH_SH7372 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SMSC_PHY if SMSC911X - select SND_SOC_AK4642 if SND_SIMPLE_CARD - select USE_OF - config MACH_ARMADILLO800EVA bool "Armadillo-800 EVA board" depends on ARCH_R8A7740 @@ -209,20 +179,6 @@ config MACH_KZM9G select SND_SOC_AK4642 if SND_SIMPLE_CARD select USE_OF -config MACH_KZM9G_REFERENCE - bool "KZM-A9-GT board - Reference Device Tree Implementation" - depends on ARCH_SH73A0 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SND_SOC_AK4642 if SND_SIMPLE_CARD - select USE_OF - ---help--- - Use reference implementation of KZM-A9-GT board support - which makes as greater use of device tree at the expense - of not supporting a number of devices. - - This is intended to aid developers - comment "Renesas ARM SoCs System Configuration" config CPU_HAS_INTEVT diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index d53996e6da97..89e463de4479 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -6,14 +6,13 @@ obj-y := timer.o console.o # CPU objects -obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o intc-sh7372.o pm-sh7372.o -obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o intc-sh73a0.o pm-sh73a0.o +obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o pm-sh73a0.o obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o pm-r8a7740.o obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o pm-r8a7779.o -obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o pm-r8a7790.o -obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o pm-r8a7791.o +obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o +obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o obj-$(CONFIG_ARCH_R8A7794) += setup-r8a7794.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o @@ -21,9 +20,7 @@ obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o # Clock objects ifndef CONFIG_COMMON_CLK obj-y += clock.o -obj-$(CONFIG_ARCH_SH7372) += clock-sh7372.o obj-$(CONFIG_ARCH_SH73A0) += clock-sh73a0.o -obj-$(CONFIG_ARCH_R8A73A4) += clock-r8a73a4.o obj-$(CONFIG_ARCH_R8A7740) += clock-r8a7740.o obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o @@ -35,6 +32,8 @@ cpu-y := platsmp.o headsmp.o # Shared SoC family objects obj-$(CONFIG_ARCH_RCAR_GEN2) += setup-rcar-gen2.o platsmp-apmu.o $(cpu-y) CFLAGS_setup-rcar-gen2.o += -march=armv7-a +obj-$(CONFIG_ARCH_R8A7790) += regulator-quirk-rcar-gen2.o +obj-$(CONFIG_ARCH_R8A7791) += regulator-quirk-rcar-gen2.o # SMP objects smp-y := $(cpu-y) @@ -46,27 +45,20 @@ smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o # PM objects obj-$(CONFIG_SUSPEND) += suspend.o -obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_PM_RCAR) += pm-rcar.o obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o - -# special sh7372 handling for IRQ objects and low level sleep code -obj-$(CONFIG_ARCH_SH7372) += entry-intc.o sleep-sh7372.o +obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o # Board objects ifdef CONFIG_ARCH_SHMOBILE_MULTI obj-$(CONFIG_MACH_MARZEN) += board-marzen-reference.o else -obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o -obj-$(CONFIG_MACH_APE6EVM_REFERENCE) += board-ape6evm-reference.o -obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o obj-$(CONFIG_MACH_BOCKW) += board-bockw.o obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o -obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o -obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o +obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o intc-sh73a0.o endif # Framework support diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 02532bea5300..e1ef19cef89c 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -1,13 +1,9 @@ # per-board load address for uImage loadaddr-y := -loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000 -loadaddr-$(CONFIG_MACH_APE6EVM_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 -loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000 -loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000 __ZRELADDR := $(sort $(loadaddr-y)) diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c deleted file mode 100644 index 3b68370b03a0..000000000000 --- a/arch/arm/mach-shmobile/board-ape6evm-reference.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * APE6EVM board support - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/of_platform.h> -#include <linux/pinctrl/machine.h> -#include <linux/platform_device.h> -#include <linux/sh_clk.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" -#include "r8a73a4.h" - -static void __init ape6evm_add_standard_devices(void) -{ - - struct clk *parent; - struct clk *mp; - - r8a73a4_clock_init(); - - /* MP clock parent = extal2 */ - parent = clk_get(NULL, "extal2"); - mp = clk_get(NULL, "mp"); - BUG_ON(IS_ERR(parent) || IS_ERR(mp)); - - clk_set_parent(mp, parent); - clk_put(parent); - clk_put(mp); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char *ape6evm_boards_compat_dt[] __initdata = { - "renesas,ape6evm-reference", - NULL, -}; - -DT_MACHINE_START(APE6EVM_DT, "ape6evm") - .init_early = shmobile_init_delay, - .init_machine = ape6evm_add_standard_devices, - .init_late = shmobile_init_late, - .dt_compat = ape6evm_boards_compat_dt, -MACHINE_END diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c deleted file mode 100644 index 444f22d370f0..000000000000 --- a/arch/arm/mach-shmobile/board-ape6evm.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * APE6EVM board support - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/irqchip.h> -#include <linux/irqchip/arm-gic.h> -#include <linux/kernel.h> -#include <linux/mfd/tmio.h> -#include <linux/mmc/host.h> -#include <linux/mmc/sh_mmcif.h> -#include <linux/mmc/sh_mobile_sdhi.h> -#include <linux/pinctrl/machine.h> -#include <linux/platform_device.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/sh_clk.h> -#include <linux/smsc911x.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" -#include "irqs.h" -#include "r8a73a4.h" - -/* LEDS */ -static struct gpio_led ape6evm_leds[] = { - { - .name = "gnss-en", - .gpio = 28, - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, { - .name = "nfc-nrst", - .gpio = 126, - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, { - .name = "gnss-nrst", - .gpio = 132, - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, { - .name = "bt-wakeup", - .gpio = 232, - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, { - .name = "strobe", - .gpio = 250, - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, { - .name = "bbresetout", - .gpio = 288, - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, -}; - -static __initdata struct gpio_led_platform_data ape6evm_leds_pdata = { - .leds = ape6evm_leds, - .num_leds = ARRAY_SIZE(ape6evm_leds), -}; - -/* GPIO KEY */ -#define GPIO_KEY(c, g, d, ...) \ - { .code = c, .gpio = g, .desc = d, .active_low = 1 } - -static struct gpio_keys_button gpio_buttons[] = { - GPIO_KEY(KEY_0, 324, "S16"), - GPIO_KEY(KEY_MENU, 325, "S17"), - GPIO_KEY(KEY_HOME, 326, "S18"), - GPIO_KEY(KEY_BACK, 327, "S19"), - GPIO_KEY(KEY_VOLUMEUP, 328, "S20"), - GPIO_KEY(KEY_VOLUMEDOWN, 329, "S21"), -}; - -static struct gpio_keys_platform_data ape6evm_keys_pdata __initdata = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -/* Dummy supplies, where voltage doesn't matter */ -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x"), - REGULATOR_SUPPLY("vdd33a", "smsc911x"), -}; - -/* SMSC LAN9220 */ -static const struct resource lan9220_res[] __initconst = { - DEFINE_RES_MEM(0x08000000, 0x1000), - { - .start = irq_pin(40), /* IRQ40 */ - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, - }, -}; - -static const struct smsc911x_platform_config lan9220_data __initconst = { - .flags = SMSC911X_USE_32BIT, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, -}; - -/* - * MMC0 power supplies: - * Both Vcc and VccQ to eMMC on APE6EVM are supplied by a tps80032 voltage - * regulator. Until support for it is added to this file we simulate the - * Vcc supply by a fixed always-on regulator - */ -static struct regulator_consumer_supply vcc_mmc0_consumers[] = -{ - REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), -}; - -/* - * SDHI0 power supplies: - * Vcc to SDHI0 on APE6EVM is supplied by a GPIO-switchable regulator. VccQ is - * provided by the same tps80032 regulator as both MMC0 voltages - see comment - * above - */ -static struct regulator_consumer_supply vcc_sdhi0_consumers[] = -{ - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), -}; - -static struct regulator_init_data vcc_sdhi0_init_data = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers), - .consumer_supplies = vcc_sdhi0_consumers, -}; - -static const struct fixed_voltage_config vcc_sdhi0_info __initconst = { - .supply_name = "SDHI0 Vcc", - .microvolts = 3300000, - .gpio = 76, - .enable_high = 1, - .init_data = &vcc_sdhi0_init_data, -}; - -/* - * SDHI1 power supplies: - * Vcc and VccQ to SDHI1 on APE6EVM are both fixed at 3.3V - */ -static struct regulator_consumer_supply vcc_sdhi1_consumers[] = -{ - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), -}; - -/* MMCIF */ -static const struct sh_mmcif_plat_data mmcif0_pdata __initconst = { - .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, - .slave_id_tx = SHDMA_SLAVE_MMCIF0_TX, - .slave_id_rx = SHDMA_SLAVE_MMCIF0_RX, - .ccs_unsupported = true, -}; - -static const struct resource mmcif0_resources[] __initconst = { - DEFINE_RES_MEM(0xee200000, 0x100), - DEFINE_RES_IRQ(gic_spi(169)), -}; - -/* SDHI0 */ -static const struct sh_mobile_sdhi_info sdhi0_pdata __initconst = { - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, -}; - -static const struct resource sdhi0_resources[] __initconst = { - DEFINE_RES_MEM(0xee100000, 0x100), - DEFINE_RES_IRQ(gic_spi(165)), -}; - -/* SDHI1 */ -static const struct sh_mobile_sdhi_info sdhi1_pdata __initconst = { - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | - MMC_CAP_NEEDS_POLL, -}; - -static const struct resource sdhi1_resources[] __initconst = { - DEFINE_RES_MEM(0xee120000, 0x100), - DEFINE_RES_IRQ(gic_spi(166)), -}; - -static const struct pinctrl_map ape6evm_pinctrl_map[] __initconst = { - /* SCIFA0 console */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a73a4", - "scifa0_data", "scifa0"), - /* SMSC */ - PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a73a4", - "irqc_irq40", "irqc"), - /* MMCIF0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a73a4", - "mmc0_data8", "mmc0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a73a4", - "mmc0_ctrl", "mmc0"), - /* SDHI0: uSD: no WP */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4", - "sdhi0_data4", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4", - "sdhi0_ctrl", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4", - "sdhi0_cd", "sdhi0"), - /* SDHI1 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a73a4", - "sdhi1_data4", "sdhi1"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a73a4", - "sdhi1_ctrl", "sdhi1"), -}; - -static void __init ape6evm_add_standard_devices(void) -{ - - struct clk *parent; - struct clk *mp; - - r8a73a4_clock_init(); - - /* MP clock parent = extal2 */ - parent = clk_get(NULL, "extal2"); - mp = clk_get(NULL, "mp"); - BUG_ON(IS_ERR(parent) || IS_ERR(mp)); - - clk_set_parent(mp, parent); - clk_put(parent); - clk_put(mp); - - pinctrl_register_mappings(ape6evm_pinctrl_map, - ARRAY_SIZE(ape6evm_pinctrl_map)); - r8a73a4_pinmux_init(); - r8a73a4_add_standard_devices(); - - /* LAN9220 ethernet */ - gpio_request_one(270, GPIOF_OUT_INIT_HIGH, NULL); /* smsc9220 RESET */ - - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - - platform_device_register_resndata(NULL, "smsc911x", -1, - lan9220_res, ARRAY_SIZE(lan9220_res), - &lan9220_data, sizeof(lan9220_data)); - - regulator_register_always_on(1, "MMC0 Vcc", vcc_mmc0_consumers, - ARRAY_SIZE(vcc_mmc0_consumers), 2800000); - platform_device_register_resndata(NULL, "sh_mmcif", 0, - mmcif0_resources, ARRAY_SIZE(mmcif0_resources), - &mmcif0_pdata, sizeof(mmcif0_pdata)); - platform_device_register_data(NULL, "reg-fixed-voltage", 2, - &vcc_sdhi0_info, sizeof(vcc_sdhi0_info)); - platform_device_register_resndata(NULL, "sh_mobile_sdhi", 0, - sdhi0_resources, ARRAY_SIZE(sdhi0_resources), - &sdhi0_pdata, sizeof(sdhi0_pdata)); - regulator_register_always_on(3, "SDHI1 Vcc", vcc_sdhi1_consumers, - ARRAY_SIZE(vcc_sdhi1_consumers), 3300000); - platform_device_register_resndata(NULL, "sh_mobile_sdhi", 1, - sdhi1_resources, ARRAY_SIZE(sdhi1_resources), - &sdhi1_pdata, sizeof(sdhi1_pdata)); - platform_device_register_data(NULL, "gpio-keys", -1, - &ape6evm_keys_pdata, - sizeof(ape6evm_keys_pdata)); - platform_device_register_data(NULL, "leds-gpio", -1, - &ape6evm_leds_pdata, - sizeof(ape6evm_leds_pdata)); -} - -static void __init ape6evm_legacy_init_time(void) -{ - /* Do not invoke DT-based timers via clocksource_of_init() */ -} - -static void __init ape6evm_legacy_init_irq(void) -{ - void __iomem *gic_dist_base = ioremap_nocache(0xf1001000, 0x1000); - void __iomem *gic_cpu_base = ioremap_nocache(0xf1002000, 0x1000); - - gic_init(0, 29, gic_dist_base, gic_cpu_base); - - /* Do not invoke DT-based interrupt code via irqchip_init() */ -} - - -static const char *ape6evm_boards_compat_dt[] __initdata = { - "renesas,ape6evm", - NULL, -}; - -DT_MACHINE_START(APE6EVM_DT, "ape6evm") - .init_early = shmobile_init_delay, - .init_irq = ape6evm_legacy_init_irq, - .init_machine = ape6evm_add_standard_devices, - .init_late = shmobile_init_late, - .dt_compat = ape6evm_boards_compat_dt, - .init_time = ape6evm_legacy_init_time, -MACHINE_END diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 6d949f1c850b..bf37e3c532f6 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -754,12 +754,12 @@ static struct platform_device vcc_sdhi1 = { }; /* SDHI0 */ -static struct sh_mobile_sdhi_info sdhi0_info = { - .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, - .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | +static struct tmio_mmc_data sdhi0_info = { + .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX, + .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX, + .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, + .flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, .cd_gpio = 167, }; @@ -796,12 +796,12 @@ static struct platform_device sdhi0_device = { }; /* SDHI1 */ -static struct sh_mobile_sdhi_info sdhi1_info = { - .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, - .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | +static struct tmio_mmc_data sdhi1_info = { + .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI1_TX, + .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI1_RX, + .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, + .flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, /* Port72 cannot generate IRQs, will be used in polling mode. */ .cd_gpio = 72, }; @@ -1015,7 +1015,6 @@ static struct asoc_simple_card_info fsi_wm8978_info = { .platform = "sh_fsi2", .daifmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM, .cpu_dai = { - .fmt = SND_SOC_DAIFMT_IB_NF, .name = "fsia-dai", }, .codec_dai = { @@ -1040,9 +1039,9 @@ static struct asoc_simple_card_info fsi2_hdmi_info = { .card = "FSI2B-HDMI", .codec = "sh-mobile-hdmi", .platform = "sh_fsi2", + .daifmt = SND_SOC_DAIFMT_CBS_CFS, .cpu_dai = { .name = "fsib-dai", - .fmt = SND_SOC_DAIFMT_CBS_CFS, }, .codec_dai = { .name = "sh_mobile_hdmi-hifi", diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c index d649ade4a202..9a74efda3d18 100644 --- a/arch/arm/mach-shmobile/board-bockw-reference.c +++ b/arch/arm/mach-shmobile/board-bockw-reference.c @@ -36,7 +36,9 @@ static void __init bockw_init(void) void __iomem *fpga; void __iomem *pfc; +#ifndef CONFIG_COMMON_CLK r8a7778_clock_init(); +#endif r8a7778_init_irq_extpin_dt(1); r8a7778_add_dt_devices(); diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index f27b5a833bf0..25558d1f417f 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -201,12 +201,12 @@ static struct rcar_phy_platform_data usb_phy_platform_data __initdata = /* SDHI */ -static struct sh_mobile_sdhi_info sdhi0_info __initdata = { - .dma_slave_tx = HPBDMA_SLAVE_SDHI0_TX, - .dma_slave_rx = HPBDMA_SLAVE_SDHI0_RX, - .tmio_caps = MMC_CAP_SD_HIGHSPEED, - .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, +static struct tmio_mmc_data sdhi0_info __initdata = { + .chan_priv_tx = (void *)HPBDMA_SLAVE_SDHI0_TX, + .chan_priv_rx = (void *)HPBDMA_SLAVE_SDHI0_RX, + .capabilities = MMC_CAP_SD_HIGHSPEED, + .ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, + .flags = TMIO_MMC_HAS_IDLE_WAIT, }; static struct resource sdhi0_resources[] __initdata = { @@ -683,7 +683,7 @@ static void __init bockw_init(void) platform_device_register_resndata( NULL, "sh_mobile_sdhi", 0, sdhi0_resources, ARRAY_SIZE(sdhi0_resources), - &sdhi0_info, sizeof(struct sh_mobile_sdhi_info)); + &sdhi0_info, sizeof(struct tmio_mmc_data)); } /* for Audio */ diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c deleted file mode 100644 index 2e82e44ab852..000000000000 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * KZM-A9-GT board support - Reference Device Tree Implementation - * - * Copyright (C) 2012 Horms Solutions Ltd. - * - * Based on board-kzm9g.c - * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/input.h> -#include <linux/of_platform.h> - -#include <asm/hardware/cache-l2x0.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" -#include "sh73a0.h" - -static void __init kzm_init(void) -{ - sh73a0_add_standard_devices_dt(); - -#ifdef CONFIG_CACHE_L2X0 - /* Shared attribute override enable, 64K*8way */ - l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff); -#endif -} - -#define RESCNT2 IOMEM(0xe6188020) -static void kzm9g_restart(enum reboot_mode mode, const char *cmd) -{ - /* Do soft power on reset */ - writel((1 << 31), RESCNT2); -} - -static const char *kzm9g_boards_compat_dt[] __initdata = { - "renesas,kzm9g-reference", - NULL, -}; - -DT_MACHINE_START(KZM9G_DT, "kzm9g-reference") - .smp = smp_ops(sh73a0_smp_ops), - .map_io = sh73a0_map_io, - .init_early = shmobile_init_delay, - .init_machine = kzm_init, - .init_late = shmobile_init_late, - .restart = kzm9g_restart, - .dt_compat = kzm9g_boards_compat_dt, -MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 7c9b63bdde9f..260d8319fd82 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -442,11 +442,11 @@ static struct platform_device vcc_sdhi2 = { }; /* SDHI */ -static struct sh_mobile_sdhi_info sdhi0_info = { - .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, - .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | +static struct tmio_mmc_data sdhi0_info = { + .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX, + .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX, + .flags = TMIO_MMC_HAS_IDLE_WAIT, + .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD, }; @@ -484,13 +484,13 @@ static struct platform_device sdhi0_device = { }; /* Micro SD */ -static struct sh_mobile_sdhi_info sdhi2_info = { - .dma_slave_tx = SHDMA_SLAVE_SDHI2_TX, - .dma_slave_rx = SHDMA_SLAVE_SDHI2_RX, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | +static struct tmio_mmc_data sdhi2_info = { + .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI2_TX, + .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI2_RX, + .flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD | TMIO_MMC_WRPROTECT_DISABLE, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_POWER_OFF_CARD, + .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_POWER_OFF_CARD, .cd_gpio = 13, }; diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c deleted file mode 100644 index a1c1dfb6a67a..000000000000 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ /dev/null @@ -1,1522 +0,0 @@ -/* - * mackerel board support - * - * Copyright (C) 2010 Renesas Solutions Corp. - * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * based on ap4evb - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/delay.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <linux/leds.h> -#include <linux/mfd/tmio.h> -#include <linux/mmc/host.h> -#include <linux/mmc/sh_mmcif.h> -#include <linux/mmc/sh_mobile_sdhi.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/sh_flctl.h> -#include <linux/pinctrl/machine.h> -#include <linux/pinctrl/pinconf-generic.h> -#include <linux/platform_data/gpio_backlight.h> -#include <linux/pm_clock.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/smsc911x.h> -#include <linux/sh_clk.h> -#include <linux/tca6416_keypad.h> -#include <linux/usb/renesas_usbhs.h> -#include <linux/dma-mapping.h> - -#include <video/sh_mobile_hdmi.h> -#include <video/sh_mobile_lcdc.h> -#include <media/sh_mobile_ceu.h> -#include <media/soc_camera.h> -#include <media/soc_camera_platform.h> -#include <sound/sh_fsi.h> -#include <sound/simple_card.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include "common.h" -#include "intc.h" -#include "irqs.h" -#include "pm-rmobile.h" -#include "sh-gpio.h" -#include "sh7372.h" - -/* - * Address Interface BusWidth note - * ------------------------------------------------------------------ - * 0x0000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = ON - * 0x0800_0000 user area - - * 0x1000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = OFF - * 0x1400_0000 Ether (LAN9220) 16bit - * 0x1600_0000 user area - cannot use with NAND - * 0x1800_0000 user area - - * 0x1A00_0000 - - * 0x4000_0000 LPDDR2-SDRAM (POP) 32bit - */ - -/* - * CPU mode - * - * SW4 | Boot Area| Master | Remarks - * 1 | 2 | 3 | 4 | 5 | 6 | 8 | | Processor| - * ----+-----+-----+-----+-----+-----+-----+----------+----------+-------------- - * ON | ON | OFF | ON | ON | OFF | OFF | External | System | External ROM - * ON | ON | ON | ON | ON | OFF | OFF | External | System | ROM Debug - * ON | ON | X | ON | OFF | OFF | OFF | Built-in | System | ROM Debug - * X | OFF | X | X | X | X | OFF | Built-in | System | MaskROM - * OFF | X | X | X | X | X | OFF | Built-in | System | MaskROM - * X | X | X | OFF | X | X | OFF | Built-in | System | MaskROM - * OFF | ON | OFF | X | X | OFF | ON | External | System | Standalone - * ON | OFF | OFF | X | X | OFF | ON | External | Realtime | Standalone -*/ - -/* - * NOR Flash ROM - * - * SW1 | SW2 | SW7 | NOR Flash ROM - * bit1 | bit1 bit2 | bit1 | Memory allocation - * ------+------------+------+------------------ - * OFF | ON OFF | ON | Area 0 - * OFF | ON OFF | OFF | Area 4 - */ - -/* - * SMSC 9220 - * - * SW1 SMSC 9220 - * ----------------------- - * ON access disable - * OFF access enable - */ - -/* - * NAND Flash ROM - * - * SW1 | SW2 | SW7 | NAND Flash ROM - * bit1 | bit1 bit2 | bit2 | Memory allocation - * ------+------------+------+------------------ - * OFF | ON OFF | ON | FCE 0 - * OFF | ON OFF | OFF | FCE 1 - */ - -/* - * External interrupt pin settings - * - * IRQX | pin setting | device | level - * ------+--------------------+--------------------+------- - * IRQ0 | ICR1A.IRQ0SA=0010 | SDHI2 card detect | Low - * IRQ6 | ICR1A.IRQ6SA=0011 | Ether(LAN9220) | High - * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Touch Panel | Low - * IRQ8 | ICR2A.IRQ8SA=0010 | MMC/SD card detect | Low - * IRQ9 | ICR2A.IRQ9SA=0010 | KEY(TCA6408) | Low - * IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345) | High - * IRQ22 | ICR4A.IRQ22SA=0011 | Sensor(AK8975) | High - */ - -/* - * USB - * - * USB0 : CN22 : Function - * USB1 : CN31 : Function/Host *1 - * - * J30 (for CN31) *1 - * ----------+---------------+------------- - * 1-2 short | VBUS 5V | Host - * open | external VBUS | Function - * - * CAUTION - * - * renesas_usbhs driver can use external interrupt mode - * (which come from USB-PHY) or autonomy mode (it use own interrupt) - * for detecting connection/disconnection when Function. - * USB will be power OFF while it has been disconnecting - * if external interrupt mode, and it is always power ON if autonomy mode, - * - * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0", - * because Touchscreen is using IRQ7-PORT40. - * It is impossible to use IRQ7 demux on this board. - */ - -/* - * SDHI0 (CN12) - * - * SW56 : OFF - * - */ - -/* MMC /SDHI1 (CN7) - * - * I/O voltage : 1.8v - * - * Power voltage : 1.8v or 3.3v - * J22 : select power voltage *1 - * 1-2 pin : 1.8v - * 2-3 pin : 3.3v - * - * *1 - * Please change J22 depends the card to be used. - * MMC's OCR field set to support either voltage for the card inserted. - * - * SW1 | SW33 - * | bit1 | bit2 | bit3 | bit4 - * -------------+------+------+------+------- - * MMC0 OFF | OFF | X | ON | X (Use MMCIF) - * SDHI1 OFF | ON | X | OFF | X (Use MFD_SH_MOBILE_SDHI) - * - */ - -/* - * SDHI2 (CN23) - * - * microSD card sloct - * - */ - -/* - * FSI - AK4642 - * - * it needs amixer settings for playing - * - * amixer set "Headphone Enable" on - */ - -/* Fixed 3.3V and 1.8V regulators to be used by multiple devices */ -static struct regulator_consumer_supply fixed1v8_power_consumers[] = -{ - /* - * J22 on mackerel switches mmcif.0 and sdhi.1 between 1.8V and 3.3V - * Since we cannot support both voltages, we support the default 1.8V - */ - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), - REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), - REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), -}; - -static struct regulator_consumer_supply fixed3v3_power_consumers[] = -{ - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"), -}; - -/* Dummy supplies, where voltage doesn't matter */ -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x"), - REGULATOR_SUPPLY("vdd33a", "smsc911x"), -}; - -/* MTD */ -static struct mtd_partition nor_flash_partitions[] = { - { - .name = "loader", - .offset = 0x00000000, - .size = 512 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "bootenv", - .offset = MTDPART_OFS_APPEND, - .size = 512 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel_ro", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - }, - { - .name = "data", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data nor_flash_data = { - .width = 2, - .parts = nor_flash_partitions, - .nr_parts = ARRAY_SIZE(nor_flash_partitions), -}; - -static struct resource nor_flash_resources[] = { - [0] = { - .start = 0x20000000, /* CS0 shadow instead of regular CS0 */ - .end = 0x28000000 - 1, /* needed by USB MASK ROM boot */ - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device nor_flash_device = { - .name = "physmap-flash", - .dev = { - .platform_data = &nor_flash_data, - }, - .num_resources = ARRAY_SIZE(nor_flash_resources), - .resource = nor_flash_resources, -}; - -/* SMSC */ -static struct resource smc911x_resources[] = { - { - .start = 0x14000000, - .end = 0x16000000 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = evt2irq(0x02c0) /* IRQ6A */, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config smsc911x_info = { - .flags = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, -}; - -static struct platform_device smc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smc911x_resources), - .resource = smc911x_resources, - .dev = { - .platform_data = &smsc911x_info, - }, -}; - -/* MERAM */ -static struct sh_mobile_meram_info mackerel_meram_info = { - .addr_mode = SH_MOBILE_MERAM_MODE1, -}; - -static struct resource meram_resources[] = { - [0] = { - .name = "regs", - .start = 0xe8000000, - .end = 0xe807ffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "meram", - .start = 0xe8080000, - .end = 0xe81fffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device meram_device = { - .name = "sh_mobile_meram", - .id = 0, - .num_resources = ARRAY_SIZE(meram_resources), - .resource = meram_resources, - .dev = { - .platform_data = &mackerel_meram_info, - }, -}; - -/* LCDC and backlight */ -static struct fb_videomode mackerel_lcdc_modes[] = { - { - .name = "WVGA Panel", - .xres = 800, - .yres = 480, - .left_margin = 220, - .right_margin = 110, - .hsync_len = 70, - .upper_margin = 20, - .lower_margin = 5, - .vsync_len = 5, - .sync = 0, - }, -}; - -static const struct sh_mobile_meram_cfg lcd_meram_cfg = { - .icb[0] = { - .meram_size = 0x40, - }, - .icb[1] = { - .meram_size = 0x40, - }, -}; - -static struct sh_mobile_lcdc_info lcdc_info = { - .meram_dev = &mackerel_meram_info, - .clock_source = LCDC_CLK_BUS, - .ch[0] = { - .chan = LCDC_CHAN_MAINLCD, - .fourcc = V4L2_PIX_FMT_RGB565, - .lcd_modes = mackerel_lcdc_modes, - .num_modes = ARRAY_SIZE(mackerel_lcdc_modes), - .interface_type = RGB24, - .clock_divider = 3, - .flags = 0, - .panel_cfg = { - .width = 152, - .height = 91, - }, - .meram_cfg = &lcd_meram_cfg, - } -}; - -static struct resource lcdc_resources[] = { - [0] = { - .name = "LCDC", - .start = 0xfe940000, - .end = 0xfe943fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0x580), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device lcdc_device = { - .name = "sh_mobile_lcdc_fb", - .num_resources = ARRAY_SIZE(lcdc_resources), - .resource = lcdc_resources, - .dev = { - .platform_data = &lcdc_info, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct gpio_backlight_platform_data gpio_backlight_data = { - .fbdev = &lcdc_device.dev, - .gpio = 31, - .def_value = 1, - .name = "backlight", -}; - -static struct platform_device gpio_backlight_device = { - .name = "gpio-backlight", - .dev = { - .platform_data = &gpio_backlight_data, - }, -}; - -/* HDMI */ -static struct sh_mobile_hdmi_info hdmi_info = { - .flags = HDMI_SND_SRC_SPDIF, -}; - -static struct resource hdmi_resources[] = { - [0] = { - .name = "HDMI", - .start = 0xe6be0000, - .end = 0xe6be00ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - /* There's also an HDMI interrupt on INTCS @ 0x18e0 */ - .start = evt2irq(0x17e0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device hdmi_device = { - .name = "sh-mobile-hdmi", - .num_resources = ARRAY_SIZE(hdmi_resources), - .resource = hdmi_resources, - .id = -1, - .dev = { - .platform_data = &hdmi_info, - }, -}; - -static const struct sh_mobile_meram_cfg hdmi_meram_cfg = { - .icb[0] = { - .meram_size = 0x100, - }, - .icb[1] = { - .meram_size = 0x100, - }, -}; - -static struct sh_mobile_lcdc_info hdmi_lcdc_info = { - .meram_dev = &mackerel_meram_info, - .clock_source = LCDC_CLK_EXTERNAL, - .ch[0] = { - .chan = LCDC_CHAN_MAINLCD, - .fourcc = V4L2_PIX_FMT_RGB565, - .interface_type = RGB24, - .clock_divider = 1, - .flags = LCDC_FLAGS_DWPOL, - .meram_cfg = &hdmi_meram_cfg, - .tx_dev = &hdmi_device, - } -}; - -static struct resource hdmi_lcdc_resources[] = { - [0] = { - .name = "LCDC1", - .start = 0xfe944000, - .end = 0xfe947fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0x1780), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device hdmi_lcdc_device = { - .name = "sh_mobile_lcdc_fb", - .num_resources = ARRAY_SIZE(hdmi_lcdc_resources), - .resource = hdmi_lcdc_resources, - .id = 1, - .dev = { - .platform_data = &hdmi_lcdc_info, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct asoc_simple_card_info fsi2_hdmi_info = { - .name = "HDMI", - .card = "FSI2B-HDMI", - .codec = "sh-mobile-hdmi", - .platform = "sh_fsi2", - .daifmt = SND_SOC_DAIFMT_CBS_CFS, - .cpu_dai = { - .name = "fsib-dai", - }, - .codec_dai = { - .name = "sh_mobile_hdmi-hifi", - }, -}; - -static struct platform_device fsi_hdmi_device = { - .name = "asoc-simple-card", - .id = 1, - .dev = { - .platform_data = &fsi2_hdmi_info, - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &fsi_hdmi_device.dev.coherent_dma_mask, - }, -}; - -static void __init hdmi_init_pm_clock(void) -{ - struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); - int ret; - long rate; - - if (IS_ERR(hdmi_ick)) { - ret = PTR_ERR(hdmi_ick); - pr_err("Cannot get HDMI ICK: %d\n", ret); - goto out; - } - - ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk); - if (ret < 0) { - pr_err("Cannot set PLLC2 parent: %d, %d users\n", - ret, sh7372_pllc2_clk.usecount); - goto out; - } - - pr_debug("PLLC2 initial frequency %lu\n", - clk_get_rate(&sh7372_pllc2_clk)); - - rate = clk_round_rate(&sh7372_pllc2_clk, 594000000); - if (rate <= 0) { - pr_err("Cannot get suitable rate: %ld\n", rate); - ret = -EINVAL; - goto out; - } - - ret = clk_set_rate(&sh7372_pllc2_clk, rate); - if (ret < 0) { - pr_err("Cannot set rate %ld: %d\n", rate, ret); - goto out; - } - - pr_debug("PLLC2 set frequency %lu\n", rate); - - ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); - if (ret < 0) - pr_err("Cannot set HDMI parent: %d\n", ret); - -out: - if (!IS_ERR(hdmi_ick)) - clk_put(hdmi_ick); -} - -/* USBHS0 is connected to CN22 which takes a USB Mini-B plug - * - * The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug, - * but on this particular board IRQ7 is already used by - * the touch screen. This leaves us with software polling. - */ -#define USBHS0_POLL_INTERVAL (HZ * 5) - -struct usbhs_private { - void __iomem *usbphyaddr; - void __iomem *usbcrcaddr; - struct renesas_usbhs_platform_info info; - struct delayed_work work; - struct platform_device *pdev; -}; - -#define usbhs_get_priv(pdev) \ - container_of(renesas_usbhs_get_info(pdev), \ - struct usbhs_private, info) - -#define usbhs_is_connected(priv) \ - (!((1 << 7) & __raw_readw(priv->usbcrcaddr))) - -static int usbhs_get_vbus(struct platform_device *pdev) -{ - return usbhs_is_connected(usbhs_get_priv(pdev)); -} - -static int usbhs_phy_reset(struct platform_device *pdev) -{ - struct usbhs_private *priv = usbhs_get_priv(pdev); - - /* init phy */ - __raw_writew(0x8a0a, priv->usbcrcaddr); - - return 0; -} - -static int usbhs0_get_id(struct platform_device *pdev) -{ - return USBHS_GADGET; -} - -static void usbhs0_work_function(struct work_struct *work) -{ - struct usbhs_private *priv = container_of(work, struct usbhs_private, - work.work); - - renesas_usbhs_call_notify_hotplug(priv->pdev); - schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL); -} - -static int usbhs0_hardware_init(struct platform_device *pdev) -{ - struct usbhs_private *priv = usbhs_get_priv(pdev); - - priv->pdev = pdev; - INIT_DELAYED_WORK(&priv->work, usbhs0_work_function); - schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL); - return 0; -} - -static int usbhs0_hardware_exit(struct platform_device *pdev) -{ - struct usbhs_private *priv = usbhs_get_priv(pdev); - - cancel_delayed_work_sync(&priv->work); - - return 0; -} - -static struct usbhs_private usbhs0_private = { - .usbcrcaddr = IOMEM(0xe605810c), /* USBCR2 */ - .info = { - .platform_callback = { - .hardware_init = usbhs0_hardware_init, - .hardware_exit = usbhs0_hardware_exit, - .phy_reset = usbhs_phy_reset, - .get_id = usbhs0_get_id, - .get_vbus = usbhs_get_vbus, - }, - .driver_param = { - .buswait_bwait = 4, - .d0_tx_id = SHDMA_SLAVE_USB0_TX, - .d1_rx_id = SHDMA_SLAVE_USB0_RX, - }, - }, -}; - -static struct resource usbhs0_resources[] = { - [0] = { - .name = "USBHS0", - .start = 0xe6890000, - .end = 0xe68900e6 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x1ca0) /* USB0_USB0I0 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usbhs0_device = { - .name = "renesas_usbhs", - .id = 0, - .dev = { - .platform_data = &usbhs0_private.info, - }, - .num_resources = ARRAY_SIZE(usbhs0_resources), - .resource = usbhs0_resources, -}; - -/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug - * - * Use J30 to select between Host and Function. This setting - * can however not be detected by software. Hotplug of USBHS1 - * is provided via IRQ8. - * - * Current USB1 works as "USB Host". - * - set J30 "short" - * - * If you want to use it as "USB gadget", - * - J30 "open" - * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET - * - add .get_vbus = usbhs_get_vbus in usbhs1_private - * - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices. - */ -#define IRQ8 evt2irq(0x0300) -#define USB_PHY_MODE (1 << 4) -#define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) -#define USB_PHY_ON (1 << 1) -#define USB_PHY_OFF (1 << 0) -#define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF) - -static irqreturn_t usbhs1_interrupt(int irq, void *data) -{ - struct platform_device *pdev = data; - struct usbhs_private *priv = usbhs_get_priv(pdev); - - dev_dbg(&pdev->dev, "%s\n", __func__); - - renesas_usbhs_call_notify_hotplug(pdev); - - /* clear status */ - __raw_writew(__raw_readw(priv->usbphyaddr) | USB_PHY_INT_CLR, - priv->usbphyaddr); - - return IRQ_HANDLED; -} - -static int usbhs1_hardware_init(struct platform_device *pdev) -{ - struct usbhs_private *priv = usbhs_get_priv(pdev); - int ret; - - /* clear interrupt status */ - __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr); - - ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH, - dev_name(&pdev->dev), pdev); - if (ret) { - dev_err(&pdev->dev, "request_irq err\n"); - return ret; - } - - /* enable USB phy interrupt */ - __raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->usbphyaddr); - - return 0; -} - -static int usbhs1_hardware_exit(struct platform_device *pdev) -{ - struct usbhs_private *priv = usbhs_get_priv(pdev); - - /* clear interrupt status */ - __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr); - - free_irq(IRQ8, pdev); - - return 0; -} - -static int usbhs1_get_id(struct platform_device *pdev) -{ - return USBHS_HOST; -} - -static u32 usbhs1_pipe_cfg[] = { - USB_ENDPOINT_XFER_CONTROL, - USB_ENDPOINT_XFER_ISOC, - USB_ENDPOINT_XFER_ISOC, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_INT, - USB_ENDPOINT_XFER_INT, - USB_ENDPOINT_XFER_INT, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, -}; - -static struct usbhs_private usbhs1_private = { - .usbphyaddr = IOMEM(0xe60581e2), /* USBPHY1INTAP */ - .usbcrcaddr = IOMEM(0xe6058130), /* USBCR4 */ - .info = { - .platform_callback = { - .hardware_init = usbhs1_hardware_init, - .hardware_exit = usbhs1_hardware_exit, - .get_id = usbhs1_get_id, - .phy_reset = usbhs_phy_reset, - }, - .driver_param = { - .buswait_bwait = 4, - .has_otg = 1, - .pipe_type = usbhs1_pipe_cfg, - .pipe_size = ARRAY_SIZE(usbhs1_pipe_cfg), - .d0_tx_id = SHDMA_SLAVE_USB1_TX, - .d1_rx_id = SHDMA_SLAVE_USB1_RX, - }, - }, -}; - -static struct resource usbhs1_resources[] = { - [0] = { - .name = "USBHS1", - .start = 0xe68b0000, - .end = 0xe68b00e6 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usbhs1_device = { - .name = "renesas_usbhs", - .id = 1, - .dev = { - .platform_data = &usbhs1_private.info, - .dma_mask = &usbhs1_device.dev.coherent_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(usbhs1_resources), - .resource = usbhs1_resources, -}; - -/* LED */ -static struct gpio_led mackerel_leds[] = { - { - .name = "led0", - .gpio = 0, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, - { - .name = "led1", - .gpio = 1, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, - { - .name = "led2", - .gpio = 2, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, - { - .name = "led3", - .gpio = 159, - .default_state = LEDS_GPIO_DEFSTATE_ON, - } -}; - -static struct gpio_led_platform_data mackerel_leds_pdata = { - .leds = mackerel_leds, - .num_leds = ARRAY_SIZE(mackerel_leds), -}; - -static struct platform_device leds_device = { - .name = "leds-gpio", - .id = 0, - .dev = { - .platform_data = &mackerel_leds_pdata, - }, -}; - -/* FSI */ -#define IRQ_FSI evt2irq(0x1840) -static struct sh_fsi_platform_info fsi_info = { - .port_a = { - .tx_id = SHDMA_SLAVE_FSIA_TX, - .rx_id = SHDMA_SLAVE_FSIA_RX, - }, - .port_b = { - .flags = SH_FSI_CLK_CPG | - SH_FSI_FMT_SPDIF, - } -}; - -static struct resource fsi_resources[] = { - [0] = { - /* we need 0xFE1F0000 to access DMA - * instead of 0xFE3C0000 */ - .name = "FSI", - .start = 0xFE1F0000, - .end = 0xFE1F0400 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_FSI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device fsi_device = { - .name = "sh_fsi2", - .id = -1, - .num_resources = ARRAY_SIZE(fsi_resources), - .resource = fsi_resources, - .dev = { - .platform_data = &fsi_info, - }, -}; - -static struct asoc_simple_card_info fsi2_ak4643_info = { - .name = "AK4643", - .card = "FSI2A-AK4643", - .codec = "ak4642-codec.0-0013", - .platform = "sh_fsi2", - .daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM, - .cpu_dai = { - .name = "fsia-dai", - }, - .codec_dai = { - .name = "ak4642-hifi", - .sysclk = 11289600, - }, -}; - -static struct platform_device fsi_ak4643_device = { - .name = "asoc-simple-card", - .dev = { - .platform_data = &fsi2_ak4643_info, - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &fsi_ak4643_device.dev.coherent_dma_mask, - }, -}; - -/* FLCTL */ -static struct mtd_partition nand_partition_info[] = { - { - .name = "system", - .offset = 0, - .size = 128 * 1024 * 1024, - }, - { - .name = "userdata", - .offset = MTDPART_OFS_APPEND, - .size = 256 * 1024 * 1024, - }, - { - .name = "cache", - .offset = MTDPART_OFS_APPEND, - .size = 128 * 1024 * 1024, - }, -}; - -static struct resource nand_flash_resources[] = { - [0] = { - .start = 0xe6a30000, - .end = 0xe6a3009b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0d80), /* flstei: status error irq */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct sh_flctl_platform_data nand_flash_data = { - .parts = nand_partition_info, - .nr_parts = ARRAY_SIZE(nand_partition_info), - .flcmncr_val = CLK_16B_12L_4H | TYPESEL_SET - | SHBUSSEL | SEL_16BIT | SNAND_E, - .use_holden = 1, -}; - -static struct platform_device nand_flash_device = { - .name = "sh_flctl", - .resource = nand_flash_resources, - .num_resources = ARRAY_SIZE(nand_flash_resources), - .dev = { - .platform_data = &nand_flash_data, - }, -}; - -/* SDHI0 */ -static struct sh_mobile_sdhi_info sdhi0_info = { - .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, - .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, - .tmio_flags = TMIO_MMC_USE_GPIO_CD, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, - .cd_gpio = 172, -}; - -static struct resource sdhi0_resources[] = { - { - .name = "SDHI0", - .start = 0xe6850000, - .end = 0xe68500ff, - .flags = IORESOURCE_MEM, - }, { - .name = SH_MOBILE_SDHI_IRQ_SDCARD, - .start = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */, - .flags = IORESOURCE_IRQ, - }, { - .name = SH_MOBILE_SDHI_IRQ_SDIO, - .start = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sdhi0_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi0_resources), - .resource = sdhi0_resources, - .id = 0, - .dev = { - .platform_data = &sdhi0_info, - }, -}; - -#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF) -/* SDHI1 */ - -/* GPIO 41 can trigger IRQ8, but it is used by USBHS1, we have to poll */ -static struct sh_mobile_sdhi_info sdhi1_info = { - .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, - .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | - MMC_CAP_NEEDS_POLL, - .cd_gpio = 41, -}; - -static struct resource sdhi1_resources[] = { - { - .name = "SDHI1", - .start = 0xe6860000, - .end = 0xe68600ff, - .flags = IORESOURCE_MEM, - }, { - .name = SH_MOBILE_SDHI_IRQ_SDCARD, - .start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */ - .flags = IORESOURCE_IRQ, - }, { - .name = SH_MOBILE_SDHI_IRQ_SDIO, - .start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sdhi1_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi1_resources), - .resource = sdhi1_resources, - .id = 1, - .dev = { - .platform_data = &sdhi1_info, - }, -}; -#endif - -/* SDHI2 */ - -/* - * The card detect pin of the top SD/MMC slot (CN23) is active low and is - * connected to GPIO SCIFB_SCK of SH7372 (GPIO 162). - */ -static struct sh_mobile_sdhi_info sdhi2_info = { - .dma_slave_tx = SHDMA_SLAVE_SDHI2_TX, - .dma_slave_rx = SHDMA_SLAVE_SDHI2_RX, - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | - MMC_CAP_NEEDS_POLL, - .cd_gpio = 162, -}; - -static struct resource sdhi2_resources[] = { - { - .name = "SDHI2", - .start = 0xe6870000, - .end = 0xe68700ff, - .flags = IORESOURCE_MEM, - }, { - .name = SH_MOBILE_SDHI_IRQ_SDCARD, - .start = evt2irq(0x1220), /* SDHI2_SDHI2I1 */ - .flags = IORESOURCE_IRQ, - }, { - .name = SH_MOBILE_SDHI_IRQ_SDIO, - .start = evt2irq(0x1240), /* SDHI2_SDHI2I2 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sdhi2_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi2_resources), - .resource = sdhi2_resources, - .id = 2, - .dev = { - .platform_data = &sdhi2_info, - }, -}; - -/* SH_MMCIF */ -#if IS_ENABLED(CONFIG_MMC_SH_MMCIF) -static struct resource sh_mmcif_resources[] = { - [0] = { - .name = "MMCIF", - .start = 0xE6BD0000, - .end = 0xE6BD00FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - /* MMC ERR */ - .start = evt2irq(0x1ac0), - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* MMC NOR */ - .start = evt2irq(0x1ae0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct sh_mmcif_plat_data sh_mmcif_plat = { - .sup_pclk = 0, - .caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_8_BIT_DATA | - MMC_CAP_NEEDS_POLL, - .use_cd_gpio = true, - /* card detect pin for SD/MMC slot (CN7) */ - .cd_gpio = 41, - .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, - .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, -}; - -static struct platform_device sh_mmcif_device = { - .name = "sh_mmcif", - .id = 0, - .dev = { - .dma_mask = NULL, - .coherent_dma_mask = 0xffffffff, - .platform_data = &sh_mmcif_plat, - }, - .num_resources = ARRAY_SIZE(sh_mmcif_resources), - .resource = sh_mmcif_resources, -}; -#endif - -static int mackerel_camera_add(struct soc_camera_device *icd); -static void mackerel_camera_del(struct soc_camera_device *icd); - -static int camera_set_capture(struct soc_camera_platform_info *info, - int enable) -{ - return 0; /* camera sensor always enabled */ -} - -static struct soc_camera_platform_info camera_info = { - .format_name = "UYVY", - .format_depth = 16, - .format = { - .code = MEDIA_BUS_FMT_UYVY8_2X8, - .colorspace = V4L2_COLORSPACE_SMPTE170M, - .field = V4L2_FIELD_NONE, - .width = 640, - .height = 480, - }, - .mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER | - V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH | - V4L2_MBUS_DATA_ACTIVE_HIGH, - .mbus_type = V4L2_MBUS_PARALLEL, - .set_capture = camera_set_capture, -}; - -static struct soc_camera_link camera_link = { - .bus_id = 0, - .add_device = mackerel_camera_add, - .del_device = mackerel_camera_del, - .module_name = "soc_camera_platform", - .priv = &camera_info, -}; - -static struct platform_device *camera_device; - -static void mackerel_camera_release(struct device *dev) -{ - soc_camera_platform_release(&camera_device); -} - -static int mackerel_camera_add(struct soc_camera_device *icd) -{ - return soc_camera_platform_add(icd, &camera_device, &camera_link, - mackerel_camera_release, 0); -} - -static void mackerel_camera_del(struct soc_camera_device *icd) -{ - soc_camera_platform_del(icd, camera_device, &camera_link); -} - -static struct sh_mobile_ceu_info sh_mobile_ceu_info = { - .flags = SH_CEU_FLAG_USE_8BIT_BUS, - .max_width = 8188, - .max_height = 8188, -}; - -static struct resource ceu_resources[] = { - [0] = { - .name = "CEU", - .start = 0xfe910000, - .end = 0xfe91009f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0x880), - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* place holder for contiguous memory */ - }, -}; - -static struct platform_device ceu_device = { - .name = "sh_mobile_ceu", - .id = 0, /* "ceu0" clock */ - .num_resources = ARRAY_SIZE(ceu_resources), - .resource = ceu_resources, - .dev = { - .platform_data = &sh_mobile_ceu_info, - .coherent_dma_mask = 0xffffffff, - }, -}; - -static struct platform_device mackerel_camera = { - .name = "soc-camera-pdrv", - .id = 0, - .dev = { - .platform_data = &camera_link, - }, -}; - -static struct platform_device *mackerel_devices[] __initdata = { - &nor_flash_device, - &smc911x_device, - &lcdc_device, - &gpio_backlight_device, - &usbhs0_device, - &usbhs1_device, - &leds_device, - &fsi_device, - &fsi_ak4643_device, - &fsi_hdmi_device, - &nand_flash_device, - &sdhi0_device, -#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF) - &sdhi1_device, -#else - &sh_mmcif_device, -#endif - &sdhi2_device, - &ceu_device, - &mackerel_camera, - &hdmi_device, - &hdmi_lcdc_device, - &meram_device, -}; - -/* Keypad Initialization */ -#define KEYPAD_BUTTON(ev_type, ev_code, act_low) \ -{ \ - .type = ev_type, \ - .code = ev_code, \ - .active_low = act_low, \ -} - -#define KEYPAD_BUTTON_LOW(event_code) KEYPAD_BUTTON(EV_KEY, event_code, 1) - -static struct tca6416_button mackerel_gpio_keys[] = { - KEYPAD_BUTTON_LOW(KEY_HOME), - KEYPAD_BUTTON_LOW(KEY_MENU), - KEYPAD_BUTTON_LOW(KEY_BACK), - KEYPAD_BUTTON_LOW(KEY_POWER), -}; - -static struct tca6416_keys_platform_data mackerel_tca6416_keys_info = { - .buttons = mackerel_gpio_keys, - .nbuttons = ARRAY_SIZE(mackerel_gpio_keys), - .rep = 1, - .use_polling = 0, - .pinmask = 0x000F, -}; - -/* I2C */ -#define IRQ7 evt2irq(0x02e0) -#define IRQ9 evt2irq(0x0320) - -static struct i2c_board_info i2c0_devices[] = { - { - I2C_BOARD_INFO("ak4643", 0x13), - }, - /* Keypad */ - { - I2C_BOARD_INFO("tca6408-keys", 0x20), - .platform_data = &mackerel_tca6416_keys_info, - .irq = IRQ9, - }, - /* Touchscreen */ - { - I2C_BOARD_INFO("st1232-ts", 0x55), - .irq = IRQ7, - }, -}; - -#define IRQ21 evt2irq(0x32a0) - -static struct i2c_board_info i2c1_devices[] = { - /* Accelerometer */ - { - I2C_BOARD_INFO("adxl34x", 0x53), - .irq = IRQ21, - }, -}; - -static unsigned long pin_pulldown_conf[] = { - PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0), -}; - -static const struct pinctrl_map mackerel_pinctrl_map[] = { - /* ADXL34X */ - PIN_MAP_MUX_GROUP_DEFAULT("1-0053", "pfc-sh7372", - "intc_irq21", "intc"), - /* CEU */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372", - "ceu_data_0_7", "ceu"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372", - "ceu_clk_0", "ceu"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372", - "ceu_sync", "ceu"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372", - "ceu_field", "ceu"), - /* FLCTL */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372", - "flctl_data", "flctl"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372", - "flctl_ce0", "flctl"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372", - "flctl_ctrl", "flctl"), - /* FSIA (AK4643) */ - PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372", - "fsia_sclk_in", "fsia"), - PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372", - "fsia_data_in", "fsia"), - PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372", - "fsia_data_out", "fsia"), - /* FSIB (HDMI) */ - PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-sh7372", - "fsib_mclk_in", "fsib"), - /* HDMI */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-sh7372", - "hdmi", "hdmi"), - /* LCDC */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372", - "lcd_data24", "lcd"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372", - "lcd_sync", "lcd"), - /* SCIFA0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-sh7372", - "scifa0_data", "scifa0"), - /* SCIFA2 (GT-720F GPS module) */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh7372", - "scifa2_data", "scifa2"), - /* SDHI0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", - "sdhi0_data4", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", - "sdhi0_ctrl", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", - "sdhi0_wp", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", - "intc_irq26_1", "intc"), - /* SDHI1 */ -#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF) - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372", - "sdhi1_data4", "sdhi1"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372", - "sdhi1_ctrl", "sdhi1"), -#else - /* MMCIF */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372", - "mmc0_data8_0", "mmc0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372", - "mmc0_ctrl_0", "mmc0"), -#endif - /* SDHI2 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh7372", - "sdhi2_data4", "sdhi2"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh7372", - "sdhi2_ctrl", "sdhi2"), - /* SMSC911X */ - PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372", - "bsc_cs5a", "bsc"), - PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372", - "intc_irq6_0", "intc"), - /* ST1232 */ - PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-sh7372", - "intc_irq7_0", "intc"), - /* TCA6416 */ - PIN_MAP_MUX_GROUP_DEFAULT("0-0020", "pfc-sh7372", - "intc_irq9_0", "intc"), - /* USBHS0 */ - PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.0", "pfc-sh7372", - "usb0_vbus", "usb0"), - PIN_MAP_CONFIGS_GROUP_DEFAULT("renesas_usbhs.0", "pfc-sh7372", - "usb0_vbus", pin_pulldown_conf), - /* USBHS1 */ - PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372", - "usb1_vbus", "usb1"), - PIN_MAP_CONFIGS_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372", - "usb1_vbus", pin_pulldown_conf), - PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372", - "usb1_otg_id_0", "usb1"), -}; - -#define GPIO_PORT9CR IOMEM(0xE6051009) -#define GPIO_PORT10CR IOMEM(0xE605100A) -#define SRCR4 IOMEM(0xe61580bc) -#define USCCR1 IOMEM(0xE6058144) -static void __init mackerel_init(void) -{ - static struct pm_domain_device domain_devices[] __initdata = { - { "A4LC", &lcdc_device, }, - { "A4LC", &hdmi_lcdc_device, }, - { "A4LC", &meram_device, }, - { "A4MP", &fsi_device, }, - { "A3SP", &usbhs0_device, }, - { "A3SP", &usbhs1_device, }, - { "A3SP", &nand_flash_device, }, - { "A3SP", &sdhi0_device, }, -#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF) - { "A3SP", &sdhi1_device, }, -#else - { "A3SP", &sh_mmcif_device, }, -#endif - { "A3SP", &sdhi2_device, }, - { "A4R", &ceu_device, }, - }; - u32 srcr4; - struct clk *clk; - - regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, - ARRAY_SIZE(fixed1v8_power_consumers), 1800000); - regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers, - ARRAY_SIZE(fixed3v3_power_consumers), 3300000); - regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - - /* External clock source */ - clk_set_rate(&sh7372_dv_clki_clk, 27000000); - - pinctrl_register_mappings(mackerel_pinctrl_map, - ARRAY_SIZE(mackerel_pinctrl_map)); - sh7372_pinmux_init(); - - gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ - - /* FSI2 port A (ak4643) */ - gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */ - - gpio_request(9, NULL); - gpio_request(10, NULL); - gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */ - gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */ - - intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */ - - /* FSI2 port B (HDMI) */ - __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */ - - /* set SPU2 clock to 119.6 MHz */ - clk = clk_get(NULL, "spu_clk"); - if (!IS_ERR(clk)) { - clk_set_rate(clk, clk_round_rate(clk, 119600000)); - clk_put(clk); - } - - /* Keypad */ - irq_set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH); - - /* Touchscreen */ - irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW); - - /* Accelerometer */ - irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH); - - /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */ - srcr4 = __raw_readl(SRCR4); - __raw_writel(srcr4 | (1 << 13), SRCR4); - udelay(50); - __raw_writel(srcr4 & ~(1 << 13), SRCR4); - - i2c_register_board_info(0, i2c0_devices, - ARRAY_SIZE(i2c0_devices)); - i2c_register_board_info(1, i2c1_devices, - ARRAY_SIZE(i2c1_devices)); - - sh7372_add_standard_devices(); - - platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices)); - - rmobile_add_devices_to_domains(domain_devices, - ARRAY_SIZE(domain_devices)); - - hdmi_init_pm_clock(); - sh7372_pm_init(); - pm_clk_add(&fsi_device.dev, "spu2"); - pm_clk_add(&hdmi_lcdc_device.dev, "hdmi"); -} - -static const char *mackerel_boards_compat_dt[] __initdata = { - "renesas,mackerel", - NULL, -}; - -DT_MACHINE_START(MACKEREL_DT, "mackerel") - .map_io = sh7372_map_io, - .init_early = sh7372_add_early_devices, - .init_irq = sh7372_init_irq, - .handle_irq = shmobile_handle_irq_intc, - .init_machine = mackerel_init, - .init_late = sh7372_pm_init_late, - .init_time = sh7372_earlytimer_init, - .dt_compat = mackerel_boards_compat_dt, -MACHINE_END diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 598f704f76ae..51db288f192a 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -122,11 +122,11 @@ static struct resource sdhi0_resources[] = { }, }; -static struct sh_mobile_sdhi_info sdhi0_platform_data = { - .dma_slave_tx = HPBDMA_SLAVE_SDHI0_TX, - .dma_slave_rx = HPBDMA_SLAVE_SDHI0_RX, - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT, - .tmio_caps = MMC_CAP_SD_HIGHSPEED, +static struct tmio_mmc_data sdhi0_platform_data = { + .chan_priv_tx = (void *)HPBDMA_SLAVE_SDHI0_TX, + .chan_priv_rx = (void *)HPBDMA_SLAVE_SDHI0_RX, + .flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT, + .capabilities = MMC_CAP_SD_HIGHSPEED, }; static struct platform_device sdhi0_device = { diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c deleted file mode 100644 index 1cf44dc6d718..000000000000 --- a/arch/arm/mach-shmobile/clock-r8a73a4.c +++ /dev/null @@ -1,659 +0,0 @@ -/* - * r8a73a4 clock framework support - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/init.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/sh_clk.h> -#include <linux/clkdev.h> -#include "common.h" -#include "clock.h" - -#define CPG_BASE 0xe6150000 -#define CPG_LEN 0x270 - -#define SMSTPCR2 0xe6150138 -#define SMSTPCR3 0xe615013c -#define SMSTPCR4 0xe6150140 -#define SMSTPCR5 0xe6150144 - -#define FRQCRA 0xE6150000 -#define FRQCRB 0xE6150004 -#define FRQCRC 0xE61500E0 -#define VCLKCR1 0xE6150008 -#define VCLKCR2 0xE615000C -#define VCLKCR3 0xE615001C -#define VCLKCR4 0xE6150014 -#define VCLKCR5 0xE6150034 -#define ZBCKCR 0xE6150010 -#define SD0CKCR 0xE6150074 -#define SD1CKCR 0xE6150078 -#define SD2CKCR 0xE615007C -#define MMC0CKCR 0xE6150240 -#define MMC1CKCR 0xE6150244 -#define FSIACKCR 0xE6150018 -#define FSIBCKCR 0xE6150090 -#define MPCKCR 0xe6150080 -#define SPUVCKCR 0xE6150094 -#define HSICKCR 0xE615026C -#define M4CKCR 0xE6150098 -#define PLLECR 0xE61500D0 -#define PLL0CR 0xE61500D8 -#define PLL1CR 0xE6150028 -#define PLL2CR 0xE615002C -#define PLL2SCR 0xE61501F4 -#define PLL2HCR 0xE61501E4 -#define CKSCR 0xE61500C0 - -#define CPG_MAP(o) ((o - CPG_BASE) + cpg_mapping.base) - -static struct clk_mapping cpg_mapping = { - .phys = CPG_BASE, - .len = CPG_LEN, -}; - -static struct clk extalr_clk = { - .rate = 32768, - .mapping = &cpg_mapping, -}; - -static struct clk extal1_clk = { - .rate = 26000000, - .mapping = &cpg_mapping, -}; - -static struct clk extal2_clk = { - .rate = 48000000, - .mapping = &cpg_mapping, -}; - -static struct sh_clk_ops followparent_clk_ops = { - .recalc = followparent_recalc, -}; - -static struct clk main_clk = { - /* .parent will be set r8a73a4_clock_init */ - .ops = &followparent_clk_ops, -}; - -SH_CLK_RATIO(div2, 1, 2); -SH_CLK_RATIO(div4, 1, 4); - -SH_FIXED_RATIO_CLK(main_div2_clk, main_clk, div2); -SH_FIXED_RATIO_CLK(extal1_div2_clk, extal1_clk, div2); -SH_FIXED_RATIO_CLK(extal2_div2_clk, extal2_clk, div2); -SH_FIXED_RATIO_CLK(extal2_div4_clk, extal2_clk, div4); - -/* External FSIACK/FSIBCK clock */ -static struct clk fsiack_clk = { -}; - -static struct clk fsibck_clk = { -}; - -/* - * PLL clocks - */ -static struct clk *pll_parent_main[] = { - [0] = &main_clk, - [1] = &main_div2_clk -}; - -static struct clk *pll_parent_main_extal[8] = { - [0] = &main_div2_clk, - [1] = &extal2_div2_clk, - [3] = &extal2_div4_clk, - [4] = &main_clk, - [5] = &extal2_clk, -}; - -static unsigned long pll_recalc(struct clk *clk) -{ - unsigned long mult = 1; - - if (ioread32(CPG_MAP(PLLECR)) & (1 << clk->enable_bit)) - mult = (((ioread32(clk->mapped_reg) >> 24) & 0x7f) + 1); - - return clk->parent->rate * mult; -} - -static int pll_set_parent(struct clk *clk, struct clk *parent) -{ - u32 val; - int i, ret; - - if (!clk->parent_table || !clk->parent_num) - return -EINVAL; - - /* Search the parent */ - for (i = 0; i < clk->parent_num; i++) - if (clk->parent_table[i] == parent) - break; - - if (i == clk->parent_num) - return -ENODEV; - - ret = clk_reparent(clk, parent); - if (ret < 0) - return ret; - - val = ioread32(clk->mapped_reg) & - ~(((1 << clk->src_width) - 1) << clk->src_shift); - - iowrite32(val | i << clk->src_shift, clk->mapped_reg); - - return 0; -} - -static struct sh_clk_ops pll_clk_ops = { - .recalc = pll_recalc, - .set_parent = pll_set_parent, -}; - -#define PLL_CLOCK(name, p, pt, w, s, reg, e) \ - static struct clk name = { \ - .ops = &pll_clk_ops, \ - .flags = CLK_ENABLE_ON_INIT, \ - .parent = p, \ - .parent_table = pt, \ - .parent_num = ARRAY_SIZE(pt), \ - .src_width = w, \ - .src_shift = s, \ - .enable_reg = (void __iomem *)reg, \ - .enable_bit = e, \ - .mapping = &cpg_mapping, \ - } - -PLL_CLOCK(pll0_clk, &main_clk, pll_parent_main, 1, 20, PLL0CR, 0); -PLL_CLOCK(pll1_clk, &main_clk, pll_parent_main, 1, 7, PLL1CR, 1); -PLL_CLOCK(pll2_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2CR, 2); -PLL_CLOCK(pll2s_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2SCR, 4); -PLL_CLOCK(pll2h_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2HCR, 5); - -SH_FIXED_RATIO_CLK(pll1_div2_clk, pll1_clk, div2); - -static atomic_t frqcr_lock; - -/* Several clocks need to access FRQCRB, have to lock */ -static bool frqcr_kick_check(struct clk *clk) -{ - return !(ioread32(CPG_MAP(FRQCRB)) & BIT(31)); -} - -static int frqcr_kick_do(struct clk *clk) -{ - int i; - - /* set KICK bit in FRQCRB to update hardware setting, check success */ - iowrite32(ioread32(CPG_MAP(FRQCRB)) | BIT(31), CPG_MAP(FRQCRB)); - for (i = 1000; i; i--) - if (ioread32(CPG_MAP(FRQCRB)) & BIT(31)) - cpu_relax(); - else - return 0; - - return -ETIMEDOUT; -} - -static int zclk_set_rate(struct clk *clk, unsigned long rate) -{ - void __iomem *frqcrc; - int ret; - unsigned long step, p_rate; - u32 val; - - if (!clk->parent || !__clk_get(clk->parent)) - return -ENODEV; - - if (!atomic_inc_and_test(&frqcr_lock) || !frqcr_kick_check(clk)) { - ret = -EBUSY; - goto done; - } - - /* - * Users are supposed to first call clk_set_rate() only with - * clk_round_rate() results. So, we don't fix wrong rates here, but - * guard against them anyway - */ - - p_rate = clk_get_rate(clk->parent); - if (rate == p_rate) { - val = 0; - } else { - step = DIV_ROUND_CLOSEST(p_rate, 32); - - if (rate > p_rate || rate < step) { - ret = -EINVAL; - goto done; - } - - val = 32 - rate / step; - } - - frqcrc = clk->mapped_reg + (FRQCRC - (u32)clk->enable_reg); - - iowrite32((ioread32(frqcrc) & ~(clk->div_mask << clk->enable_bit)) | - (val << clk->enable_bit), frqcrc); - - ret = frqcr_kick_do(clk); - -done: - atomic_dec(&frqcr_lock); - __clk_put(clk->parent); - return ret; -} - -static long zclk_round_rate(struct clk *clk, unsigned long rate) -{ - /* - * theoretical rate = parent rate * multiplier / 32, - * where 1 <= multiplier <= 32. Therefore we should do - * multiplier = rate * 32 / parent rate - * rounded rate = parent rate * multiplier / 32. - * However, multiplication before division won't fit in 32 bits, so - * we sacrifice some precision by first dividing and then multiplying. - * To find the nearest divisor we calculate both and pick up the best - * one. This avoids 64-bit arithmetics. - */ - unsigned long step, mul_min, mul_max, rate_min, rate_max; - - rate_max = clk_get_rate(clk->parent); - - /* output freq <= parent */ - if (rate >= rate_max) - return rate_max; - - step = DIV_ROUND_CLOSEST(rate_max, 32); - /* output freq >= parent / 32 */ - if (step >= rate) - return step; - - mul_min = rate / step; - mul_max = DIV_ROUND_UP(rate, step); - rate_min = step * mul_min; - if (mul_max == mul_min) - return rate_min; - - rate_max = step * mul_max; - - if (rate_max - rate < rate - rate_min) - return rate_max; - - return rate_min; -} - -static unsigned long zclk_recalc(struct clk *clk) -{ - void __iomem *frqcrc = FRQCRC - (u32)clk->enable_reg + clk->mapped_reg; - unsigned int max = clk->div_mask + 1; - unsigned long val = ((ioread32(frqcrc) >> clk->enable_bit) & - clk->div_mask); - - return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), max) * - (max - val); -} - -static struct sh_clk_ops zclk_ops = { - .recalc = zclk_recalc, - .set_rate = zclk_set_rate, - .round_rate = zclk_round_rate, -}; - -static struct clk z_clk = { - .parent = &pll0_clk, - .div_mask = 0x1f, - .enable_bit = 8, - /* We'll need to access FRQCRB and FRQCRC */ - .enable_reg = (void __iomem *)FRQCRB, - .ops = &zclk_ops, -}; - -/* - * It seems only 1/2 divider is usable in manual mode. 1/2 / 2/3 - * switching is only available in auto-DVFS mode - */ -SH_FIXED_RATIO_CLK(pll0_div2_clk, pll0_clk, div2); - -static struct clk z2_clk = { - .parent = &pll0_div2_clk, - .div_mask = 0x1f, - .enable_bit = 0, - /* We'll need to access FRQCRB and FRQCRC */ - .enable_reg = (void __iomem *)FRQCRB, - .ops = &zclk_ops, -}; - -static struct clk *main_clks[] = { - &extalr_clk, - &extal1_clk, - &extal1_div2_clk, - &extal2_clk, - &extal2_div2_clk, - &extal2_div4_clk, - &main_clk, - &main_div2_clk, - &fsiack_clk, - &fsibck_clk, - &pll0_clk, - &pll1_clk, - &pll1_div2_clk, - &pll2_clk, - &pll2s_clk, - &pll2h_clk, - &z_clk, - &pll0_div2_clk, - &z2_clk, -}; - -/* DIV4 */ -static void div4_kick(struct clk *clk) -{ - if (!WARN(!atomic_inc_and_test(&frqcr_lock), "FRQCR* lock broken!\n")) - frqcr_kick_do(clk); - atomic_dec(&frqcr_lock); -} - -static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10}; - -static struct clk_div_mult_table div4_div_mult_table = { - .divisors = divisors, - .nr_divisors = ARRAY_SIZE(divisors), -}; - -static struct clk_div4_table div4_table = { - .div_mult_table = &div4_div_mult_table, - .kick = div4_kick, -}; - -enum { - DIV4_I, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2, - DIV4_ZX, DIV4_ZS, DIV4_HP, - DIV4_NR }; - -static struct clk div4_clks[DIV4_NR] = { - [DIV4_I] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 20, 0x0dff, CLK_ENABLE_ON_INIT), - [DIV4_M3] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 12, 0x1dff, CLK_ENABLE_ON_INIT), - [DIV4_B] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 8, 0x0dff, CLK_ENABLE_ON_INIT), - [DIV4_M1] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 4, 0x1dff, 0), - [DIV4_M2] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 0, 0x1dff, 0), - [DIV4_ZX] = SH_CLK_DIV4(&pll1_clk, FRQCRB, 12, 0x0dff, 0), - [DIV4_ZS] = SH_CLK_DIV4(&pll1_clk, FRQCRB, 8, 0x0dff, 0), - [DIV4_HP] = SH_CLK_DIV4(&pll1_clk, FRQCRB, 4, 0x0dff, 0), -}; - -enum { - DIV6_ZB, - DIV6_SDHI0, DIV6_SDHI1, DIV6_SDHI2, - DIV6_MMC0, DIV6_MMC1, - DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_VCK4, DIV6_VCK5, - DIV6_FSIA, DIV6_FSIB, - DIV6_MP, DIV6_M4, DIV6_HSI, DIV6_SPUV, - DIV6_NR }; - -static struct clk *div6_parents[8] = { - [0] = &pll1_div2_clk, - [1] = &pll2s_clk, - [3] = &extal2_clk, - [4] = &main_div2_clk, - [6] = &extalr_clk, -}; - -static struct clk *fsia_parents[4] = { - [0] = &pll1_div2_clk, - [1] = &pll2s_clk, - [2] = &fsiack_clk, -}; - -static struct clk *fsib_parents[4] = { - [0] = &pll1_div2_clk, - [1] = &pll2s_clk, - [2] = &fsibck_clk, -}; - -static struct clk *mp_parents[4] = { - [0] = &pll1_div2_clk, - [1] = &pll2s_clk, - [2] = &extal2_clk, - [3] = &extal2_clk, -}; - -static struct clk *m4_parents[2] = { - [0] = &pll2s_clk, -}; - -static struct clk *hsi_parents[4] = { - [0] = &pll2h_clk, - [1] = &pll1_div2_clk, - [3] = &pll2s_clk, -}; - -/*** FIXME *** - * SH_CLK_DIV6_EXT() macro doesn't care .mapping - * but, it is necessary on R-Car (= ioremap() base CPG) - * The difference between - * SH_CLK_DIV6_EXT() <--> SH_CLK_MAP_DIV6_EXT() - * is only .mapping - */ -#define SH_CLK_MAP_DIV6_EXT(_reg, _flags, _parents, \ - _num_parents, _src_shift, _src_width) \ -{ \ - .enable_reg = (void __iomem *)_reg, \ - .enable_bit = 0, /* unused */ \ - .flags = _flags | CLK_MASK_DIV_ON_DISABLE, \ - .div_mask = SH_CLK_DIV6_MSK, \ - .parent_table = _parents, \ - .parent_num = _num_parents, \ - .src_shift = _src_shift, \ - .src_width = _src_width, \ - .mapping = &cpg_mapping, \ -} - -static struct clk div6_clks[DIV6_NR] = { - [DIV6_ZB] = SH_CLK_MAP_DIV6_EXT(ZBCKCR, CLK_ENABLE_ON_INIT, - div6_parents, 2, 7, 1), - [DIV6_SDHI0] = SH_CLK_MAP_DIV6_EXT(SD0CKCR, 0, - div6_parents, 2, 6, 2), - [DIV6_SDHI1] = SH_CLK_MAP_DIV6_EXT(SD1CKCR, 0, - div6_parents, 2, 6, 2), - [DIV6_SDHI2] = SH_CLK_MAP_DIV6_EXT(SD2CKCR, 0, - div6_parents, 2, 6, 2), - [DIV6_MMC0] = SH_CLK_MAP_DIV6_EXT(MMC0CKCR, 0, - div6_parents, 2, 6, 2), - [DIV6_MMC1] = SH_CLK_MAP_DIV6_EXT(MMC1CKCR, 0, - div6_parents, 2, 6, 2), - [DIV6_VCK1] = SH_CLK_MAP_DIV6_EXT(VCLKCR1, 0, /* didn't care bit[6-7] */ - div6_parents, ARRAY_SIZE(div6_parents), 12, 3), - [DIV6_VCK2] = SH_CLK_MAP_DIV6_EXT(VCLKCR2, 0, /* didn't care bit[6-7] */ - div6_parents, ARRAY_SIZE(div6_parents), 12, 3), - [DIV6_VCK3] = SH_CLK_MAP_DIV6_EXT(VCLKCR3, 0, /* didn't care bit[6-7] */ - div6_parents, ARRAY_SIZE(div6_parents), 12, 3), - [DIV6_VCK4] = SH_CLK_MAP_DIV6_EXT(VCLKCR4, 0, /* didn't care bit[6-7] */ - div6_parents, ARRAY_SIZE(div6_parents), 12, 3), - [DIV6_VCK5] = SH_CLK_MAP_DIV6_EXT(VCLKCR5, 0, /* didn't care bit[6-7] */ - div6_parents, ARRAY_SIZE(div6_parents), 12, 3), - [DIV6_FSIA] = SH_CLK_MAP_DIV6_EXT(FSIACKCR, 0, - fsia_parents, ARRAY_SIZE(fsia_parents), 6, 2), - [DIV6_FSIB] = SH_CLK_MAP_DIV6_EXT(FSIBCKCR, 0, - fsib_parents, ARRAY_SIZE(fsib_parents), 6, 2), - [DIV6_MP] = SH_CLK_MAP_DIV6_EXT(MPCKCR, 0, /* it needs bit[9-11] control */ - mp_parents, ARRAY_SIZE(mp_parents), 6, 2), - /* pll2s will be selected always for M4 */ - [DIV6_M4] = SH_CLK_MAP_DIV6_EXT(M4CKCR, 0, /* it needs bit[9] control */ - m4_parents, ARRAY_SIZE(m4_parents), 6, 1), - [DIV6_HSI] = SH_CLK_MAP_DIV6_EXT(HSICKCR, 0, /* it needs bit[9] control */ - hsi_parents, ARRAY_SIZE(hsi_parents), 6, 2), - [DIV6_SPUV] = SH_CLK_MAP_DIV6_EXT(SPUVCKCR, 0, - mp_parents, ARRAY_SIZE(mp_parents), 6, 2), -}; - -/* MSTP */ -enum { - MSTP218, MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, - MSTP329, MSTP323, MSTP318, MSTP317, MSTP316, - MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, MSTP300, - MSTP411, MSTP410, MSTP409, - MSTP522, MSTP515, - MSTP_NR -}; - -static struct clk mstp_clks[MSTP_NR] = { - [MSTP204] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 4, 0), /* SCIFA0 */ - [MSTP203] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 3, 0), /* SCIFA1 */ - [MSTP206] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 6, 0), /* SCIFB0 */ - [MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 7, 0), /* SCIFB1 */ - [MSTP216] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 16, 0), /* SCIFB2 */ - [MSTP217] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 17, 0), /* SCIFB3 */ - [MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC */ - [MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 0, 0), /* IIC2 */ - [MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1],SMSTPCR3, 5, 0), /* MMCIF1 */ - [MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI2],SMSTPCR3, 12, 0), /* SDHI2 */ - [MSTP313] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI1],SMSTPCR3, 13, 0), /* SDHI1 */ - [MSTP314] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI0],SMSTPCR3, 14, 0), /* SDHI0 */ - [MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0],SMSTPCR3, 15, 0), /* MMCIF0 */ - [MSTP316] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 16, 0), /* IIC6 */ - [MSTP317] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 17, 0), /* IIC7 */ - [MSTP318] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* IIC0 */ - [MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */ - [MSTP329] = SH_CLK_MSTP32(&extalr_clk, SMSTPCR3, 29, 0), /* CMT10 */ - [MSTP409] = SH_CLK_MSTP32(&main_div2_clk, SMSTPCR4, 9, 0), /* IIC5 */ - [MSTP410] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */ - [MSTP411] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */ - [MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */ - [MSTP515] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR5, 15, 0), /* IIC8 */ -}; - -static struct clk_lookup lookups[] = { - /* main clock */ - CLKDEV_CON_ID("extal1", &extal1_clk), - CLKDEV_CON_ID("extal1_div2", &extal1_div2_clk), - CLKDEV_CON_ID("extal2", &extal2_clk), - CLKDEV_CON_ID("extal2_div2", &extal2_div2_clk), - CLKDEV_CON_ID("extal2_div4", &extal2_div4_clk), - CLKDEV_CON_ID("fsiack", &fsiack_clk), - CLKDEV_CON_ID("fsibck", &fsibck_clk), - - /* pll clock */ - CLKDEV_CON_ID("pll1", &pll1_clk), - CLKDEV_CON_ID("pll1_div2", &pll1_div2_clk), - CLKDEV_CON_ID("pll2", &pll2_clk), - CLKDEV_CON_ID("pll2s", &pll2s_clk), - CLKDEV_CON_ID("pll2h", &pll2h_clk), - - /* CPU clock */ - CLKDEV_DEV_ID("cpu0", &z_clk), - - /* DIV6 */ - CLKDEV_CON_ID("zb", &div6_clks[DIV6_ZB]), - CLKDEV_CON_ID("vck1", &div6_clks[DIV6_VCK1]), - CLKDEV_CON_ID("vck2", &div6_clks[DIV6_VCK2]), - CLKDEV_CON_ID("vck3", &div6_clks[DIV6_VCK3]), - CLKDEV_CON_ID("vck4", &div6_clks[DIV6_VCK4]), - CLKDEV_CON_ID("vck5", &div6_clks[DIV6_VCK5]), - CLKDEV_CON_ID("fsia", &div6_clks[DIV6_FSIA]), - CLKDEV_CON_ID("fsib", &div6_clks[DIV6_FSIB]), - CLKDEV_CON_ID("mp", &div6_clks[DIV6_MP]), - CLKDEV_CON_ID("m4", &div6_clks[DIV6_M4]), - CLKDEV_CON_ID("hsi", &div6_clks[DIV6_HSI]), - CLKDEV_CON_ID("spuv", &div6_clks[DIV6_SPUV]), - - /* MSTP */ - CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), - CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]), - CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), - CLKDEV_DEV_ID("e6c50000.serial", &mstp_clks[MSTP203]), - CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), - CLKDEV_DEV_ID("e6c20000.serial", &mstp_clks[MSTP206]), - CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]), - CLKDEV_DEV_ID("e6c30000.serial", &mstp_clks[MSTP207]), - CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), - CLKDEV_DEV_ID("e6ce0000.serial", &mstp_clks[MSTP216]), - CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]), - CLKDEV_DEV_ID("e6cf0000.serial", &mstp_clks[MSTP217]), - CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), - CLKDEV_DEV_ID("e6700020.dma-controller", &mstp_clks[MSTP218]), - CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), - CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]), - CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]), - CLKDEV_DEV_ID("ee220000.mmc", &mstp_clks[MSTP305]), - CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]), - CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP312]), - CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), - CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]), - CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), - CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]), - CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]), - CLKDEV_DEV_ID("ee200000.mmc", &mstp_clks[MSTP315]), - CLKDEV_DEV_ID("e6550000.i2c", &mstp_clks[MSTP316]), - CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]), - CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]), - CLKDEV_DEV_ID("e6510000.i2c", &mstp_clks[MSTP323]), - CLKDEV_ICK_ID("fck", "sh-cmt-48-gen2.1", &mstp_clks[MSTP329]), - CLKDEV_ICK_ID("fck", "e6130000.timer", &mstp_clks[MSTP329]), - CLKDEV_DEV_ID("e60b0000.i2c", &mstp_clks[MSTP409]), - CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP410]), - CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP411]), - CLKDEV_DEV_ID("e6570000.i2c", &mstp_clks[MSTP515]), - - /* for DT */ - CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]), -}; - -void __init r8a73a4_clock_init(void) -{ - void __iomem *reg; - int k, ret = 0; - u32 ckscr; - - atomic_set(&frqcr_lock, -1); - - reg = ioremap_nocache(CKSCR, PAGE_SIZE); - BUG_ON(!reg); - ckscr = ioread32(reg); - iounmap(reg); - - switch ((ckscr >> 28) & 0x3) { - case 0: - main_clk.parent = &extal1_clk; - break; - case 1: - main_clk.parent = &extal1_div2_clk; - break; - case 2: - main_clk.parent = &extal2_clk; - break; - case 3: - main_clk.parent = &extal2_div2_clk; - break; - } - - for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) - ret = clk_register(main_clks[k]); - - if (!ret) - ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); - - if (!ret) - ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR); - - if (!ret) - ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - if (!ret) - shmobile_clk_init(); - else - panic("failed to setup r8a73a4 clocks\n"); -} diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c deleted file mode 100644 index 3bc92f46060e..000000000000 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ /dev/null @@ -1,620 +0,0 @@ -/* - * SH7372 clock framework support - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/sh_clk.h> -#include <linux/clkdev.h> -#include "clock.h" -#include "common.h" - -/* SH7372 registers */ -#define FRQCRA IOMEM(0xe6150000) -#define FRQCRB IOMEM(0xe6150004) -#define FRQCRC IOMEM(0xe61500e0) -#define FRQCRD IOMEM(0xe61500e4) -#define VCLKCR1 IOMEM(0xe6150008) -#define VCLKCR2 IOMEM(0xe615000c) -#define VCLKCR3 IOMEM(0xe615001c) -#define FMSICKCR IOMEM(0xe6150010) -#define FMSOCKCR IOMEM(0xe6150014) -#define FSIACKCR IOMEM(0xe6150018) -#define FSIBCKCR IOMEM(0xe6150090) -#define SUBCKCR IOMEM(0xe6150080) -#define SPUCKCR IOMEM(0xe6150084) -#define VOUCKCR IOMEM(0xe6150088) -#define HDMICKCR IOMEM(0xe6150094) -#define DSITCKCR IOMEM(0xe6150060) -#define DSI0PCKCR IOMEM(0xe6150064) -#define DSI1PCKCR IOMEM(0xe6150098) -#define PLLC01CR IOMEM(0xe6150028) -#define PLLC2CR IOMEM(0xe615002c) -#define RMSTPCR0 IOMEM(0xe6150110) -#define RMSTPCR1 IOMEM(0xe6150114) -#define RMSTPCR2 IOMEM(0xe6150118) -#define RMSTPCR3 IOMEM(0xe615011c) -#define RMSTPCR4 IOMEM(0xe6150120) -#define SMSTPCR0 IOMEM(0xe6150130) -#define SMSTPCR1 IOMEM(0xe6150134) -#define SMSTPCR2 IOMEM(0xe6150138) -#define SMSTPCR3 IOMEM(0xe615013c) -#define SMSTPCR4 IOMEM(0xe6150140) - -#define FSIDIVA 0xFE1F8000 -#define FSIDIVB 0xFE1F8008 - -/* Platforms must set frequency on their DV_CLKI pin */ -struct clk sh7372_dv_clki_clk = { -}; - -/* Fixed 32 KHz root clock from EXTALR pin */ -static struct clk r_clk = { - .rate = 32768, -}; - -/* - * 26MHz default rate for the EXTAL1 root input clock. - * If needed, reset this with clk_set_rate() from the platform code. - */ -struct clk sh7372_extal1_clk = { - .rate = 26000000, -}; - -/* - * 48MHz default rate for the EXTAL2 root input clock. - * If needed, reset this with clk_set_rate() from the platform code. - */ -struct clk sh7372_extal2_clk = { - .rate = 48000000, -}; - -SH_CLK_RATIO(div2, 1, 2); - -SH_FIXED_RATIO_CLKg(sh7372_dv_clki_div2_clk, sh7372_dv_clki_clk, div2); -SH_FIXED_RATIO_CLK(extal1_div2_clk, sh7372_extal1_clk, div2); -SH_FIXED_RATIO_CLK(extal2_div2_clk, sh7372_extal2_clk, div2); -SH_FIXED_RATIO_CLK(extal2_div4_clk, extal2_div2_clk, div2); - -/* PLLC0 and PLLC1 */ -static unsigned long pllc01_recalc(struct clk *clk) -{ - unsigned long mult = 1; - - if (__raw_readl(PLLC01CR) & (1 << 14)) - mult = (((__raw_readl(clk->enable_reg) >> 24) & 0x3f) + 1) * 2; - - return clk->parent->rate * mult; -} - -static struct sh_clk_ops pllc01_clk_ops = { - .recalc = pllc01_recalc, -}; - -static struct clk pllc0_clk = { - .ops = &pllc01_clk_ops, - .flags = CLK_ENABLE_ON_INIT, - .parent = &extal1_div2_clk, - .enable_reg = (void __iomem *)FRQCRC, -}; - -static struct clk pllc1_clk = { - .ops = &pllc01_clk_ops, - .flags = CLK_ENABLE_ON_INIT, - .parent = &extal1_div2_clk, - .enable_reg = (void __iomem *)FRQCRA, -}; - -/* Divide PLLC1 by two */ -SH_FIXED_RATIO_CLK(pllc1_div2_clk, pllc1_clk, div2); - -/* PLLC2 */ - -/* Indices are important - they are the actual src selecting values */ -static struct clk *pllc2_parent[] = { - [0] = &extal1_div2_clk, - [1] = &extal2_div2_clk, - [2] = &sh7372_dv_clki_div2_clk, -}; - -/* Only multipliers 20 * 2 to 46 * 2 are valid, last entry for CPUFREQ_TABLE_END */ -static struct cpufreq_frequency_table pllc2_freq_table[29]; - -static void pllc2_table_rebuild(struct clk *clk) -{ - int i; - - /* Initialise PLLC2 frequency table */ - for (i = 0; i < ARRAY_SIZE(pllc2_freq_table) - 2; i++) { - pllc2_freq_table[i].frequency = clk->parent->rate * (i + 20) * 2; - pllc2_freq_table[i].driver_data = i; - } - - /* This is a special entry - switching PLL off makes it a repeater */ - pllc2_freq_table[i].frequency = clk->parent->rate; - pllc2_freq_table[i].driver_data = i; - - pllc2_freq_table[++i].frequency = CPUFREQ_TABLE_END; - pllc2_freq_table[i].driver_data = i; -} - -static unsigned long pllc2_recalc(struct clk *clk) -{ - unsigned long mult = 1; - - pllc2_table_rebuild(clk); - - /* - * If the PLL is off, mult == 1, clk->rate will be updated in - * pllc2_enable(). - */ - if (__raw_readl(PLLC2CR) & (1 << 31)) - mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2; - - return clk->parent->rate * mult; -} - -static long pllc2_round_rate(struct clk *clk, unsigned long rate) -{ - return clk_rate_table_round(clk, clk->freq_table, rate); -} - -static int pllc2_enable(struct clk *clk) -{ - int i; - - __raw_writel(__raw_readl(PLLC2CR) | 0x80000000, PLLC2CR); - - for (i = 0; i < 100; i++) - if (__raw_readl(PLLC2CR) & 0x80000000) { - clk->rate = pllc2_recalc(clk); - return 0; - } - - pr_err("%s(): timeout!\n", __func__); - - return -ETIMEDOUT; -} - -static void pllc2_disable(struct clk *clk) -{ - __raw_writel(__raw_readl(PLLC2CR) & ~0x80000000, PLLC2CR); -} - -static int pllc2_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long value; - int idx; - - idx = clk_rate_table_find(clk, clk->freq_table, rate); - if (idx < 0) - return idx; - - if (rate == clk->parent->rate) - return -EINVAL; - - value = __raw_readl(PLLC2CR) & ~(0x3f << 24); - - __raw_writel(value | ((idx + 19) << 24), PLLC2CR); - - clk->rate = clk->freq_table[idx].frequency; - - return 0; -} - -static int pllc2_set_parent(struct clk *clk, struct clk *parent) -{ - u32 value; - int ret, i; - - if (!clk->parent_table || !clk->parent_num) - return -EINVAL; - - /* Search the parent */ - for (i = 0; i < clk->parent_num; i++) - if (clk->parent_table[i] == parent) - break; - - if (i == clk->parent_num) - return -ENODEV; - - ret = clk_reparent(clk, parent); - if (ret < 0) - return ret; - - value = __raw_readl(PLLC2CR) & ~(3 << 6); - - __raw_writel(value | (i << 6), PLLC2CR); - - /* Rebiuld the frequency table */ - pllc2_table_rebuild(clk); - - return 0; -} - -static struct sh_clk_ops pllc2_clk_ops = { - .recalc = pllc2_recalc, - .round_rate = pllc2_round_rate, - .set_rate = pllc2_set_rate, - .enable = pllc2_enable, - .disable = pllc2_disable, - .set_parent = pllc2_set_parent, -}; - -struct clk sh7372_pllc2_clk = { - .ops = &pllc2_clk_ops, - .parent = &extal1_div2_clk, - .freq_table = pllc2_freq_table, - .nr_freqs = ARRAY_SIZE(pllc2_freq_table) - 1, - .parent_table = pllc2_parent, - .parent_num = ARRAY_SIZE(pllc2_parent), -}; - -/* External input clock (pin name: FSIACK/FSIBCK ) */ -static struct clk fsiack_clk = { -}; - -static struct clk fsibck_clk = { -}; - -static struct clk *main_clks[] = { - &sh7372_dv_clki_clk, - &r_clk, - &sh7372_extal1_clk, - &sh7372_extal2_clk, - &sh7372_dv_clki_div2_clk, - &extal1_div2_clk, - &extal2_div2_clk, - &extal2_div4_clk, - &pllc0_clk, - &pllc1_clk, - &pllc1_div2_clk, - &sh7372_pllc2_clk, - &fsiack_clk, - &fsibck_clk, -}; - -static void div4_kick(struct clk *clk) -{ - unsigned long value; - - /* set KICK bit in FRQCRB to update hardware setting */ - value = __raw_readl(FRQCRB); - value |= (1 << 31); - __raw_writel(value, FRQCRB); -} - -static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, - 24, 32, 36, 48, 0, 72, 96, 0 }; - -static struct clk_div_mult_table div4_div_mult_table = { - .divisors = divisors, - .nr_divisors = ARRAY_SIZE(divisors), -}; - -static struct clk_div4_table div4_table = { - .div_mult_table = &div4_div_mult_table, - .kick = div4_kick, -}; - -enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR, - DIV4_ZX, DIV4_HP, - DIV4_ISPB, DIV4_S, DIV4_ZB, DIV4_ZB3, DIV4_CP, - DIV4_DDRP, DIV4_NR }; - -#define DIV4(_reg, _bit, _mask, _flags) \ - SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags) - -static struct clk div4_clks[DIV4_NR] = { - [DIV4_I] = DIV4(FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_ZG] = DIV4(FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_B] = DIV4(FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_M1] = DIV4(FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_CSIR] = DIV4(FRQCRA, 0, 0x6fff, 0), - [DIV4_ZX] = DIV4(FRQCRB, 12, 0x6fff, 0), - [DIV4_HP] = DIV4(FRQCRB, 4, 0x6fff, 0), - [DIV4_ISPB] = DIV4(FRQCRC, 20, 0x6fff, 0), - [DIV4_S] = DIV4(FRQCRC, 12, 0x6fff, 0), - [DIV4_ZB] = DIV4(FRQCRC, 8, 0x6fff, 0), - [DIV4_ZB3] = DIV4(FRQCRC, 4, 0x6fff, 0), - [DIV4_CP] = DIV4(FRQCRC, 0, 0x6fff, 0), - [DIV4_DDRP] = DIV4(FRQCRD, 0, 0x677c, 0), -}; - -enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_FMSI, DIV6_FMSO, - DIV6_SUB, DIV6_SPU, - DIV6_VOU, DIV6_DSIT, DIV6_DSI0P, DIV6_DSI1P, - DIV6_NR }; - -static struct clk div6_clks[DIV6_NR] = { - [DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0), - [DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0), - [DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0), - [DIV6_FMSI] = SH_CLK_DIV6(&pllc1_div2_clk, FMSICKCR, 0), - [DIV6_FMSO] = SH_CLK_DIV6(&pllc1_div2_clk, FMSOCKCR, 0), - [DIV6_SUB] = SH_CLK_DIV6(&sh7372_extal2_clk, SUBCKCR, 0), - [DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0), - [DIV6_VOU] = SH_CLK_DIV6(&pllc1_div2_clk, VOUCKCR, 0), - [DIV6_DSIT] = SH_CLK_DIV6(&pllc1_div2_clk, DSITCKCR, 0), - [DIV6_DSI0P] = SH_CLK_DIV6(&pllc1_div2_clk, DSI0PCKCR, 0), - [DIV6_DSI1P] = SH_CLK_DIV6(&pllc1_div2_clk, DSI1PCKCR, 0), -}; - -enum { DIV6_HDMI, DIV6_FSIA, DIV6_FSIB, DIV6_REPARENT_NR }; - -/* Indices are important - they are the actual src selecting values */ -static struct clk *hdmi_parent[] = { - [0] = &pllc1_div2_clk, - [1] = &sh7372_pllc2_clk, - [2] = &sh7372_dv_clki_clk, - [3] = NULL, /* pllc2_div4 not implemented yet */ -}; - -static struct clk *fsiackcr_parent[] = { - [0] = &pllc1_div2_clk, - [1] = &sh7372_pllc2_clk, - [2] = &fsiack_clk, /* external input for FSI A */ - [3] = NULL, /* setting prohibited */ -}; - -static struct clk *fsibckcr_parent[] = { - [0] = &pllc1_div2_clk, - [1] = &sh7372_pllc2_clk, - [2] = &fsibck_clk, /* external input for FSI B */ - [3] = NULL, /* setting prohibited */ -}; - -static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { - [DIV6_HDMI] = SH_CLK_DIV6_EXT(HDMICKCR, 0, - hdmi_parent, ARRAY_SIZE(hdmi_parent), 6, 2), - [DIV6_FSIA] = SH_CLK_DIV6_EXT(FSIACKCR, 0, - fsiackcr_parent, ARRAY_SIZE(fsiackcr_parent), 6, 2), - [DIV6_FSIB] = SH_CLK_DIV6_EXT(FSIBCKCR, 0, - fsibckcr_parent, ARRAY_SIZE(fsibckcr_parent), 6, 2), -}; - -/* FSI DIV */ -enum { FSIDIV_A, FSIDIV_B, FSIDIV_REPARENT_NR }; - -static struct clk fsidivs[] = { - [FSIDIV_A] = SH_CLK_FSIDIV(FSIDIVA, &div6_reparent_clks[DIV6_FSIA]), - [FSIDIV_B] = SH_CLK_FSIDIV(FSIDIVB, &div6_reparent_clks[DIV6_FSIB]), -}; - -enum { MSTP001, MSTP000, - MSTP131, MSTP130, - MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, - MSTP118, MSTP117, MSTP116, MSTP113, - MSTP106, MSTP101, MSTP100, - MSTP223, - MSTP218, MSTP217, MSTP216, MSTP214, MSTP208, MSTP207, - MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP328, MSTP323, MSTP322, MSTP315, MSTP314, MSTP313, MSTP312, - MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP407, MSTP406, - MSTP405, MSTP404, MSTP403, MSTP400, - MSTP_NR }; - -#define MSTP(_parent, _reg, _bit, _flags) \ - SH_CLK_MSTP32(_parent, _reg, _bit, _flags) - -static struct clk mstp_clks[MSTP_NR] = { - [MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */ - [MSTP000] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 0, 0), /* MSIOF0 */ - [MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */ - [MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */ - [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */ - [MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */ - [MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU */ - [MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2 */ - [MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */ - [MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */ - [MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */ - [MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */ - [MSTP113] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 13, 0), /* MERAM */ - [MSTP106] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 6, 0), /* JPU */ - [MSTP101] = MSTP(&div4_clks[DIV4_M1], SMSTPCR1, 1, 0), /* VPU */ - [MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */ - [MSTP223] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR2, 23, 0), /* SPU2 */ - [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */ - [MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */ - [MSTP216] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 16, 0), /* DMAC3 */ - [MSTP214] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 14, 0), /* USBDMAC */ - [MSTP208] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 8, 0), /* MSIOF1 */ - [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ - [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ - [MSTP205] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 5, 0), /* MSIOF2 */ - [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ - [MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */ - [MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */ - [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */ - [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ - [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */ - [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ - [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */ - [MSTP315] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 15, 0), /* FLCTL*/ - [MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */ - [MSTP313] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */ - [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMC */ - [MSTP423] = MSTP(&div4_clks[DIV4_B], SMSTPCR4, 23, 0), /* DSITX1 */ - [MSTP415] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 15, 0), /* SDHI2 */ - [MSTP413] = MSTP(&pllc1_div2_clk, SMSTPCR4, 13, 0), /* HDMI */ - [MSTP411] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 11, 0), /* IIC3 */ - [MSTP410] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 10, 0), /* IIC4 */ - [MSTP407] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 7, 0), /* USB-DMAC1 */ - [MSTP406] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 6, 0), /* USB1 */ - [MSTP405] = MSTP(&r_clk, SMSTPCR4, 5, 0), /* CMT4 */ - [MSTP404] = MSTP(&r_clk, SMSTPCR4, 4, 0), /* CMT3 */ - [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ - [MSTP400] = MSTP(&r_clk, SMSTPCR4, 0, 0), /* CMT2 */ -}; - -static struct clk_lookup lookups[] = { - /* main clocks */ - CLKDEV_CON_ID("dv_clki_div2_clk", &sh7372_dv_clki_div2_clk), - CLKDEV_CON_ID("r_clk", &r_clk), - CLKDEV_CON_ID("extal1", &sh7372_extal1_clk), - CLKDEV_CON_ID("extal2", &sh7372_extal2_clk), - CLKDEV_CON_ID("extal1_div2_clk", &extal1_div2_clk), - CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk), - CLKDEV_CON_ID("extal2_div4_clk", &extal2_div4_clk), - CLKDEV_CON_ID("pllc0_clk", &pllc0_clk), - CLKDEV_CON_ID("pllc1_clk", &pllc1_clk), - CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk), - CLKDEV_CON_ID("pllc2_clk", &sh7372_pllc2_clk), - CLKDEV_CON_ID("fsiack", &fsiack_clk), - CLKDEV_CON_ID("fsibck", &fsibck_clk), - - /* DIV4 clocks */ - CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]), - CLKDEV_CON_ID("zg_clk", &div4_clks[DIV4_ZG]), - CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]), - CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]), - CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]), - CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]), - CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]), - CLKDEV_CON_ID("ispb_clk", &div4_clks[DIV4_ISPB]), - CLKDEV_CON_ID("s_clk", &div4_clks[DIV4_S]), - CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]), - CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]), - CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]), - CLKDEV_CON_ID("ddrp_clk", &div4_clks[DIV4_DDRP]), - - /* DIV6 clocks */ - CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]), - CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]), - CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]), - CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]), - CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]), - CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]), - CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]), - CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]), - CLKDEV_CON_ID("hdmi_clk", &div6_reparent_clks[DIV6_HDMI]), - - /* MSTP32 clocks */ - CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */ - CLKDEV_DEV_ID("fff30000.i2c", &mstp_clks[MSTP001]), /* IIC2 */ - CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[MSTP000]), /* MSIOF0 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */ - CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU */ - CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */ - CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX0 */ - CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */ - CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */ - CLKDEV_DEV_ID("fff20000.i2c", &mstp_clks[MSTP116]), /* IIC0 */ - CLKDEV_DEV_ID("sh_mobile_meram.0", &mstp_clks[MSTP113]), /* MERAM */ - CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */ - CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */ - CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[MSTP223]), /* SPU2DSP0 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[MSTP223]), /* SPU2DSP1 */ - CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* DMAC1 */ - CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* DMAC2 */ - CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]), /* DMAC3 */ - CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]), /* USB-DMAC0 */ - CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[MSTP208]), /* MSIOF1 */ - CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ - CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP206]), /* SCIFB */ - CLKDEV_DEV_ID("spi_sh_msiof.2", &mstp_clks[MSTP205]), /* MSIOF2 */ - CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ - CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ - CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */ - CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */ - CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ - CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */ - CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ - CLKDEV_DEV_ID("e6c20000.i2c", &mstp_clks[MSTP323]), /* IIC1 */ - CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */ - CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */ - CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[MSTP322]), /* USB0 */ - CLKDEV_DEV_ID("sh_flctl.0", &mstp_clks[MSTP315]), /* FLCTL */ - CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ - CLKDEV_DEV_ID("e6850000.sdhi", &mstp_clks[MSTP314]), /* SDHI0 */ - CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ - CLKDEV_DEV_ID("e6860000.sdhi", &mstp_clks[MSTP313]), /* SDHI1 */ - CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */ - CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMC */ - CLKDEV_DEV_ID("sh-mipi-dsi.1", &mstp_clks[MSTP423]), /* DSITX1 */ - CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), /* SDHI2 */ - CLKDEV_DEV_ID("e6870000.sdhi", &mstp_clks[MSTP415]), /* SDHI2 */ - CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */ - CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */ - CLKDEV_DEV_ID("e6d20000.i2c", &mstp_clks[MSTP411]), /* IIC3 */ - CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */ - CLKDEV_DEV_ID("e6d30000.i2c", &mstp_clks[MSTP410]), /* IIC4 */ - CLKDEV_DEV_ID("sh-dma-engine.4", &mstp_clks[MSTP407]), /* USB-DMAC1 */ - CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */ - CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */ - CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[MSTP406]), /* USB1 */ - CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ - - /* ICK */ - CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]), - CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), - CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), - CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), - CLKDEV_ICK_ID("hdmi", "sh_mobile_lcdc_fb.1", - &div6_reparent_clks[DIV6_HDMI]), - CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]), - CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]), - CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]), - CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP125]), /* TMU0 */ - CLKDEV_ICK_ID("spu2", "sh_fsi2", &mstp_clks[MSTP223]), - CLKDEV_ICK_ID("fck", "sh-cmt-32-fast.4", &mstp_clks[MSTP405]), /* CMT4 */ - CLKDEV_ICK_ID("fck", "sh-cmt-32-fast.3", &mstp_clks[MSTP404]), /* CMT3 */ - CLKDEV_ICK_ID("fck", "sh-cmt-32-fast.2", &mstp_clks[MSTP400]), /* CMT2 */ - CLKDEV_ICK_ID("diva", "sh_fsi2", &fsidivs[FSIDIV_A]), - CLKDEV_ICK_ID("divb", "sh_fsi2", &fsidivs[FSIDIV_B]), - CLKDEV_ICK_ID("xcka", "sh_fsi2", &fsiack_clk), - CLKDEV_ICK_ID("xckb", "sh_fsi2", &fsibck_clk), -}; - -void __init sh7372_clock_init(void) -{ - int k, ret = 0; - - /* make sure MSTP bits on the RT/SH4AL-DSP side are off */ - __raw_writel(0xe4ef8087, RMSTPCR0); - __raw_writel(0xffffffff, RMSTPCR1); - __raw_writel(0x37c7f7ff, RMSTPCR2); - __raw_writel(0xffffffff, RMSTPCR3); - __raw_writel(0xffe0fffd, RMSTPCR4); - - for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) - ret = clk_register(main_clks[k]); - - if (!ret) - ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); - - if (!ret) - ret = sh_clk_div6_register(div6_clks, DIV6_NR); - - if (!ret) - ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR); - - if (!ret) - ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); - - if (!ret) - ret = sh_clk_fsidiv_register(fsidivs, FSIDIV_REPARENT_NR); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - if (!ret) - shmobile_clk_init(); - else - panic("failed to setup sh7372 clocks\n"); -} diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c index 34f056fc3756..68c2d06d0eaa 100644 --- a/arch/arm/mach-shmobile/clock.c +++ b/arch/arm/mach-shmobile/clock.c @@ -45,14 +45,3 @@ int __init shmobile_clk_init(void) return 0; } - -int __clk_get(struct clk *clk) -{ - return 1; -} -EXPORT_SYMBOL(__clk_get); - -void __clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(__clk_put); diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index 309025efd4cf..afc60bad6fd6 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -21,10 +21,7 @@ extern void shmobile_smp_scu_cpu_die(unsigned int cpu); extern int shmobile_smp_scu_cpu_kill(unsigned int cpu); struct clk; extern int shmobile_clk_init(void); -extern void shmobile_handle_irq_intc(struct pt_regs *); extern struct platform_suspend_ops shmobile_suspend_ops; -struct cpuidle_driver; -extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv); #ifdef CONFIG_SUSPEND int shmobile_suspend_init(void); @@ -34,12 +31,6 @@ static inline int shmobile_suspend_init(void) { return 0; } static inline void shmobile_smp_apmu_suspend_init(void) { } #endif -#ifdef CONFIG_CPU_IDLE -int shmobile_cpuidle_init(void); -#else -static inline int shmobile_cpuidle_init(void) { return 0; } -#endif - #ifdef CONFIG_CPU_FREQ int shmobile_cpufreq_init(void); #else @@ -51,7 +42,6 @@ extern void __iomem *shmobile_scu_base; static inline void __init shmobile_init_late(void) { shmobile_suspend_init(); - shmobile_cpuidle_init(); shmobile_cpufreq_init(); } diff --git a/arch/arm/mach-shmobile/cpuidle.c b/arch/arm/mach-shmobile/cpuidle.c deleted file mode 100644 index 0afeb5c7061c..000000000000 --- a/arch/arm/mach-shmobile/cpuidle.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * CPUIdle support code for SH-Mobile ARM - * - * Copyright (C) 2011 Magnus Damm - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/pm.h> -#include <linux/cpuidle.h> -#include <linux/suspend.h> -#include <linux/module.h> -#include <linux/err.h> -#include <asm/cpuidle.h> -#include <asm/io.h> - -static struct cpuidle_driver shmobile_cpuidle_default_driver = { - .name = "shmobile_cpuidle", - .owner = THIS_MODULE, - .states[0] = ARM_CPUIDLE_WFI_STATE, - .safe_state_index = 0, /* C1 */ - .state_count = 1, -}; - -static struct cpuidle_driver *cpuidle_drv = &shmobile_cpuidle_default_driver; - -void __init shmobile_cpuidle_set_driver(struct cpuidle_driver *drv) -{ - cpuidle_drv = drv; -} - -int __init shmobile_cpuidle_init(void) -{ - return cpuidle_register(cpuidle_drv, NULL); -} diff --git a/arch/arm/mach-shmobile/entry-intc.S b/arch/arm/mach-shmobile/entry-intc.S deleted file mode 100644 index 1a1c00ca39a2..000000000000 --- a/arch/arm/mach-shmobile/entry-intc.S +++ /dev/null @@ -1,54 +0,0 @@ -/* - * ARM Interrupt demux handler using INTC - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <asm/entry-macro-multi.S> - -#define INTCA_BASE 0xe6980000 -#define INTFLGA_OFFS 0x00000018 /* accept pending interrupt */ -#define INTEVTA_OFFS 0x00000020 /* vector number of accepted interrupt */ -#define INTLVLA_OFFS 0x00000030 /* priority level of accepted interrupt */ -#define INTLVLB_OFFS 0x00000034 /* previous priority level */ - - .macro get_irqnr_preamble, base, tmp - ldr \base, =INTCA_BASE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - /* The single INTFLGA read access below results in the following: - * - * 1. INTLVLB is updated with old priority value from INTLVLA - * 2. Highest priority interrupt is accepted - * 3. INTLVLA is updated to contain priority of accepted interrupt - * 4. Accepted interrupt vector is stored in INTFLGA and INTEVTA - */ - ldr \irqnr, [\base, #INTFLGA_OFFS] - - /* Restore INTLVLA with the value saved in INTLVLB. - * This is required to support interrupt priorities properly. - */ - ldrb \tmp, [\base, #INTLVLB_OFFS] - strb \tmp, [\base, #INTLVLA_OFFS] - - /* Handle invalid vector number case */ - cmp \irqnr, #0 - beq 1000f - - /* Convert vector to irq number, same as the evt2irq() macro */ - lsr \irqnr, \irqnr, #0x5 - subs \irqnr, \irqnr, #16 - -1000: - .endm - - .macro test_for_ipi, irqnr, irqstat, base, tmp - .endm - - arch_irq_handler shmobile_handle_irq_intc diff --git a/arch/arm/mach-shmobile/include/mach/clkdev.h b/arch/arm/mach-shmobile/include/mach/clkdev.h deleted file mode 100644 index 36d0163a857a..000000000000 --- a/arch/arm/mach-shmobile/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -int __clk_get(struct clk *clk); -void __clk_put(struct clk *clk); - -#endif /* __ASM_MACH_CLKDEV_H */ diff --git a/arch/arm/mach-shmobile/include/mach/head-mackerel.txt b/arch/arm/mach-shmobile/include/mach/head-mackerel.txt deleted file mode 100644 index 9f134dfeffdc..000000000000 --- a/arch/arm/mach-shmobile/include/mach/head-mackerel.txt +++ /dev/null @@ -1,93 +0,0 @@ -LIST "partner-jet-setup.txt" -LIST "(C) Copyright 2010 Renesas Solutions Corp" -LIST "Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>" - -LIST "RWT Setting" -EW 0xE6020004, 0xA500 -EW 0xE6030004, 0xA500 - -LIST "GPIO Setting" -EB 0xE6051013, 0xA2 - -LIST "CPG" -ED 0xE61500C0, 0x00000002 - -WAIT 1, 0xFE40009C - -LIST "FRQCR" -ED 0xE6150000, 0x2D1305C3 -ED 0xE61500E0, 0x9E40358E -ED 0xE6150004, 0x80331050 - -WAIT 1, 0xFE40009C - -ED 0xE61500E4, 0x00002000 - -WAIT 1, 0xFE40009C - -LIST "PLL" -ED 0xE6150028, 0x00004000 - -WAIT 1, 0xFE40009C - -ED 0xE615002C, 0x93000040 - -WAIT 1, 0xFE40009C - -LIST "SUB/USBClk" -ED 0xE6150080, 0x00000180 - -LIST "BSC" -ED 0xFEC10000, 0x00E0001B - -LIST "SBSC1" -ED 0xFE400354, 0x01AD8000 -ED 0xFE400354, 0x01AD8001 - -WAIT 5, 0xFE40009C - -ED 0xFE400008, 0xBCC90151 -ED 0xFE400040, 0x41774113 -ED 0xFE400044, 0x2712E229 -ED 0xFE400048, 0x20C18505 -ED 0xFE40004C, 0x00110209 -ED 0xFE400010, 0x00000087 - -WAIT 30, 0xFE40009C - -ED 0xFE400084, 0x0000003F -EB 0xFE500000, 0x00 - -WAIT 5, 0xFE40009C - -ED 0xFE400084, 0x0000FF0A -EB 0xFE500000, 0x00 - -WAIT 1, 0xFE40009C - -ED 0xFE400084, 0x00002201 -EB 0xFE500000, 0x00 -ED 0xFE400084, 0x00000302 -EB 0xFE500000, 0x00 -EB 0xFE5C0000, 0x00 -ED 0xFE400008, 0xBCC90159 -ED 0xFE40008C, 0x88800004 -ED 0xFE400094, 0x00000004 -ED 0xFE400028, 0xA55A0032 -ED 0xFE40002C, 0xA55A000C -ED 0xFE400020, 0xA55A2048 -ED 0xFE400008, 0xBCC90959 - -LIST "Change CPGA setting" -ED 0xE61500E0, 0x9E40352E -ED 0xE6150004, 0x80331050 - -WAIT 1, 0xFE40009C - -ED 0xFE400354, 0x01AD8002 - -LIST "SCIF0 - Serial port for earlyprintk" -EB 0xE6053098, 0xe1 -EW 0xE6C40000, 0x0000 -EB 0xE6C40004, 0x19 -EW 0xE6C40008, 0x0030 diff --git a/arch/arm/mach-shmobile/include/mach/mmc-mackerel.h b/arch/arm/mach-shmobile/include/mach/mmc-mackerel.h deleted file mode 100644 index 15d3a9efdec2..000000000000 --- a/arch/arm/mach-shmobile/include/mach/mmc-mackerel.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef MMC_MACKEREL_H -#define MMC_MACKEREL_H - -#define PORT0CR (void __iomem *)0xe6051000 -#define PORT1CR (void __iomem *)0xe6051001 -#define PORT2CR (void __iomem *)0xe6051002 -#define PORT159CR (void __iomem *)0xe605009f - -#define PORTR031_000DR (void __iomem *)0xe6055000 -#define PORTL159_128DR (void __iomem *)0xe6054010 - -static inline void mmc_init_progress(void) -{ - /* Initialise LEDS0-3 - * registers: PORT0CR-PORT2CR,PORT159CR (LED0-LED3 Control) - * value: 0x10 - enable output - */ - __raw_writeb(0x10, PORT0CR); - __raw_writeb(0x10, PORT1CR); - __raw_writeb(0x10, PORT2CR); - __raw_writeb(0x10, PORT159CR); -} - -static inline void mmc_update_progress(int n) -{ - unsigned a = 0, b = 0; - - if (n < 3) - a = 1 << n; - else - b = 1 << 31; - - __raw_writel((__raw_readl(PORTR031_000DR) & ~0x7) | a, - PORTR031_000DR); - __raw_writel((__raw_readl(PORTL159_128DR) & ~(1 << 31)) | b, - PORTL159_128DR); -} -#endif /* MMC_MACKEREL_H */ diff --git a/arch/arm/mach-shmobile/include/mach/mmc.h b/arch/arm/mach-shmobile/include/mach/mmc.h deleted file mode 100644 index e979b8fc1da2..000000000000 --- a/arch/arm/mach-shmobile/include/mach/mmc.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef MMC_H -#define MMC_H - -/************************************************** - * - * board specific settings - * - **************************************************/ - -#ifdef CONFIG_MACH_MACKEREL -#include "mach/mmc-mackerel.h" -#else -#error "unsupported board." -#endif - -#endif /* MMC_H */ diff --git a/arch/arm/mach-shmobile/include/mach/sdhi-sh7372.h b/arch/arm/mach-shmobile/include/mach/sdhi-sh7372.h deleted file mode 100644 index 4a81b01f1e8f..000000000000 --- a/arch/arm/mach-shmobile/include/mach/sdhi-sh7372.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef SDHI_SH7372_H -#define SDHI_SH7372_H - -#define SDGENCNTA 0xfe40009c - -/* The countdown of SDGENCNTA is controlled by - * ZB3D2CLK which runs at 149.5MHz. - * That is 149.5ticks/us. Approximate this as 150ticks/us. - */ -static void udelay(int us) -{ - __raw_writel(us * 150, SDGENCNTA); - while(__raw_readl(SDGENCNTA)) ; -} - -static void msleep(int ms) -{ - udelay(ms * 1000); -} - -#endif diff --git a/arch/arm/mach-shmobile/include/mach/sdhi.h b/arch/arm/mach-shmobile/include/mach/sdhi.h deleted file mode 100644 index 0ec9e69f2c3b..000000000000 --- a/arch/arm/mach-shmobile/include/mach/sdhi.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef SDHI_H -#define SDHI_H - -/************************************************** - * - * CPU specific settings - * - **************************************************/ - -#ifdef CONFIG_ARCH_SH7372 -#include "mach/sdhi-sh7372.h" -#else -#error "unsupported CPU." -#endif - -#endif /* SDHI_H */ diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h deleted file mode 100644 index 540eaff08f34..000000000000 --- a/arch/arm/mach-shmobile/include/mach/system.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <asm/system_misc.h> - -static inline void arch_reset(char mode, const char *cmd) -{ - soft_restart(0); -} - -#endif diff --git a/arch/arm/mach-shmobile/include/mach/uncompress.h b/arch/arm/mach-shmobile/include/mach/uncompress.h deleted file mode 100644 index f1aee56781e7..000000000000 --- a/arch/arm/mach-shmobile/include/mach/uncompress.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef __ASM_MACH_UNCOMPRESS_H -#define __ASM_MACH_UNCOMPRESS_H - -/* - * This does not append a newline - */ -static void putc(int c) -{ -} - -static inline void flush(void) -{ -} - -static void arch_decomp_setup(void) -{ -} - -#endif /* __ASM_MACH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h index 727cc78ac8ec..175ee05465da 100644 --- a/arch/arm/mach-shmobile/include/mach/zboot.h +++ b/arch/arm/mach-shmobile/include/mach/zboot.h @@ -9,10 +9,7 @@ * **************************************************/ -#ifdef CONFIG_MACH_MACKEREL -#define MEMORY_START 0x40000000 -#include "mach/head-mackerel.txt" -#elif defined(CONFIG_MACH_KZM9G) || defined(CONFIG_MACH_KZM9G_REFERENCE) +#ifdef CONFIG_MACH_KZM9G #define MEMORY_START 0x43000000 #include "mach/head-kzm9g.txt" #else diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c deleted file mode 100644 index 1ccf49cb485f..000000000000 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ /dev/null @@ -1,672 +0,0 @@ -/* - * sh7372 processor support - INTC hardware block - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include "intc.h" -#include "irqs.h" - -enum { - UNUSED_INTCA = 0, - - /* interrupt sources INTCA */ - DIRC, - CRYPT_STD, - IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1, - AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX, - MFI_MFIM, MFI_MFIS, - BBIF1, BBIF2, - USBHSDMAC0_USHDMI, - _3DG_SGX540, - CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3, - KEYSC_KEY, - SCIFA0, SCIFA1, SCIFA2, SCIFA3, - MSIOF2, MSIOF1, - SCIFA4, SCIFA5, SCIFB, - FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, - SDHI0_SDHI0I0, SDHI0_SDHI0I1, SDHI0_SDHI0I2, SDHI0_SDHI0I3, - SDHI1_SDHI1I0, SDHI1_SDHI1I1, SDHI1_SDHI1I2, - IRREM, - IRDA, - TPU0, - TTI20, - DDM, - SDHI2_SDHI2I0, SDHI2_SDHI2I1, SDHI2_SDHI2I2, SDHI2_SDHI2I3, - RWDT0, - DMAC1_1_DEI0, DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3, - DMAC1_2_DEI4, DMAC1_2_DEI5, DMAC1_2_DADERR, - DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3, - DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR, - DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3, - DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR, - SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, - HDMI, - SPU2_SPU0, SPU2_SPU1, - FSI, FMSI, - MIPI_HSI, - IPMMU_IPMMUD, - CEC_1, CEC_2, - AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ, - MFIS2, - CPORTR2S, - CMT14, CMT15, - MMC_MMC_ERR, MMC_MMC_NOR, - IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4, - IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3, - USB0_USB0I1, USB0_USB0I0, - USB1_USB1I1, USB1_USB1I0, - USBHSDMAC1_USHDMI, - - /* interrupt groups INTCA */ - DMAC1_1, DMAC1_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT, - AP_ARM1, AP_ARM2, SPU2, FLCTL, IIC1, SDHI0, SDHI1, SDHI2 -}; - -static struct intc_vect intca_vectors[] __initdata = { - INTC_VECT(DIRC, 0x0560), - INTC_VECT(CRYPT_STD, 0x0700), - INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0), - INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0), - INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840), - INTC_VECT(AP_ARM_COMMRX, 0x0860), - INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920), - INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960), - INTC_VECT(USBHSDMAC0_USHDMI, 0x0a00), - INTC_VECT(_3DG_SGX540, 0x0a60), - INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20), - INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60), - INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0), - INTC_VECT(KEYSC_KEY, 0x0be0), - INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20), - INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60), - INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00), - INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40), - INTC_VECT(SCIFB, 0x0d60), - INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0), - INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0), - INTC_VECT(SDHI0_SDHI0I0, 0x0e00), INTC_VECT(SDHI0_SDHI0I1, 0x0e20), - INTC_VECT(SDHI0_SDHI0I2, 0x0e40), INTC_VECT(SDHI0_SDHI0I3, 0x0e60), - INTC_VECT(SDHI1_SDHI1I0, 0x0e80), INTC_VECT(SDHI1_SDHI1I1, 0x0ea0), - INTC_VECT(SDHI1_SDHI1I2, 0x0ec0), - INTC_VECT(IRREM, 0x0f60), - INTC_VECT(IRDA, 0x0480), - INTC_VECT(TPU0, 0x04a0), - INTC_VECT(TTI20, 0x1100), - INTC_VECT(DDM, 0x1140), - INTC_VECT(SDHI2_SDHI2I0, 0x1200), INTC_VECT(SDHI2_SDHI2I1, 0x1220), - INTC_VECT(SDHI2_SDHI2I2, 0x1240), INTC_VECT(SDHI2_SDHI2I3, 0x1260), - INTC_VECT(RWDT0, 0x1280), - INTC_VECT(DMAC1_1_DEI0, 0x2000), INTC_VECT(DMAC1_1_DEI1, 0x2020), - INTC_VECT(DMAC1_1_DEI2, 0x2040), INTC_VECT(DMAC1_1_DEI3, 0x2060), - INTC_VECT(DMAC1_2_DEI4, 0x2080), INTC_VECT(DMAC1_2_DEI5, 0x20a0), - INTC_VECT(DMAC1_2_DADERR, 0x20c0), - INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120), - INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160), - INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0), - INTC_VECT(DMAC2_2_DADERR, 0x21c0), - INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220), - INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260), - INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0), - INTC_VECT(DMAC3_2_DADERR, 0x22c0), - INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1320), - INTC_VECT(SHWYSTAT_COM, 0x1340), - INTC_VECT(HDMI, 0x17e0), - INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820), - INTC_VECT(FSI, 0x1840), - INTC_VECT(FMSI, 0x1860), - INTC_VECT(MIPI_HSI, 0x18e0), - INTC_VECT(IPMMU_IPMMUD, 0x1920), - INTC_VECT(CEC_1, 0x1940), INTC_VECT(CEC_2, 0x1960), - INTC_VECT(AP_ARM_CTIIRQ, 0x1980), - INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0), - INTC_VECT(AP_ARM_DMAIRQ, 0x19c0), - INTC_VECT(AP_ARM_DMASIRQ, 0x19e0), - INTC_VECT(MFIS2, 0x1a00), - INTC_VECT(CPORTR2S, 0x1a20), - INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60), - INTC_VECT(MMC_MMC_ERR, 0x1ac0), INTC_VECT(MMC_MMC_NOR, 0x1ae0), - INTC_VECT(IIC4_ALI4, 0x1b00), INTC_VECT(IIC4_TACKI4, 0x1b20), - INTC_VECT(IIC4_WAITI4, 0x1b40), INTC_VECT(IIC4_DTEI4, 0x1b60), - INTC_VECT(IIC3_ALI3, 0x1b80), INTC_VECT(IIC3_TACKI3, 0x1ba0), - INTC_VECT(IIC3_WAITI3, 0x1bc0), INTC_VECT(IIC3_DTEI3, 0x1be0), - INTC_VECT(USB0_USB0I1, 0x1c80), INTC_VECT(USB0_USB0I0, 0x1ca0), - INTC_VECT(USB1_USB1I1, 0x1cc0), INTC_VECT(USB1_USB1I0, 0x1ce0), - INTC_VECT(USBHSDMAC1_USHDMI, 0x1d00), -}; - -static struct intc_group intca_groups[] __initdata = { - INTC_GROUP(DMAC1_1, DMAC1_1_DEI0, - DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3), - INTC_GROUP(DMAC1_2, DMAC1_2_DEI4, - DMAC1_2_DEI5, DMAC1_2_DADERR), - INTC_GROUP(DMAC2_1, DMAC2_1_DEI0, - DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3), - INTC_GROUP(DMAC2_2, DMAC2_2_DEI4, - DMAC2_2_DEI5, DMAC2_2_DADERR), - INTC_GROUP(DMAC3_1, DMAC3_1_DEI0, - DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3), - INTC_GROUP(DMAC3_2, DMAC3_2_DEI4, - DMAC3_2_DEI5, DMAC3_2_DADERR), - INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX), - INTC_GROUP(AP_ARM2, AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, - AP_ARM_DMAIRQ, AP_ARM_DMASIRQ), - INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1), - INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI, - FLCTL_FLTREQ0I, FLCTL_FLTREQ1I), - INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1), - INTC_GROUP(SDHI0, SDHI0_SDHI0I0, SDHI0_SDHI0I1, - SDHI0_SDHI0I2, SDHI0_SDHI0I3), - INTC_GROUP(SDHI1, SDHI1_SDHI1I0, SDHI1_SDHI1I1, - SDHI1_SDHI1I2), - INTC_GROUP(SDHI2, SDHI2_SDHI2I0, SDHI2_SDHI2I1, - SDHI2_SDHI2I2, SDHI2_SDHI2I3), - INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM), -}; - -static struct intc_mask_reg intca_mask_registers[] __initdata = { - { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */ - { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0, - AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } }, - { 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */ - { 0, CRYPT_STD, DIRC, 0, - DMAC1_1_DEI3, DMAC1_1_DEI2, DMAC1_1_DEI1, DMAC1_1_DEI0 } }, - { 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */ - { 0, 0, 0, 0, - BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } }, - { 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */ - { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0, - DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } }, - { 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */ - { DDM, 0, 0, 0, - 0, 0, 0, 0 } }, - { 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */ - { KEYSC_KEY, DMAC1_2_DADERR, DMAC1_2_DEI5, DMAC1_2_DEI4, - SCIFA3, SCIFA2, SCIFA1, SCIFA0 } }, - { 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */ - { SCIFB, SCIFA5, SCIFA4, MSIOF1, - 0, 0, MSIOF2, 0 } }, - { 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */ - { SDHI0_SDHI0I3, SDHI0_SDHI0I2, SDHI0_SDHI0I1, SDHI0_SDHI0I0, - FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } }, - { 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */ - { 0, SDHI1_SDHI1I2, SDHI1_SDHI1I1, SDHI1_SDHI1I0, - TTI20, USBHSDMAC0_USHDMI, 0, 0 } }, - { 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */ - { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10, - CMT2, 0, 0, _3DG_SGX540 } }, - { 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */ - { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4, - 0, 0, 0, 0 } }, - { 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */ - { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1, - 0, 0, IRREM, 0 } }, - { 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */ - { 0, 0, TPU0, 0, - 0, 0, 0, 0 } }, - { 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */ - { SDHI2_SDHI2I3, SDHI2_SDHI2I2, SDHI2_SDHI2I1, SDHI2_SDHI2I0, - 0, CMT3, 0, RWDT0 } }, - { 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */ - { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0, - 0, 0, 0, 0 } }, - { 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */ - { 0, 0, 0, 0, - 0, 0, 0, HDMI } }, - { 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */ - { SPU2_SPU0, SPU2_SPU1, FSI, FMSI, - 0, 0, 0, MIPI_HSI } }, - { 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */ - { 0, IPMMU_IPMMUD, CEC_1, CEC_2, - AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, - AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } }, - { 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */ - { MFIS2, CPORTR2S, CMT14, CMT15, - 0, 0, MMC_MMC_ERR, MMC_MMC_NOR } }, - { 0xe69500a0, 0xe69500e0, 8, /* IMR8A3 / IMCR8A3 */ - { IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4, - IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3 } }, - { 0xe69500a4, 0xe69500e4, 8, /* IMR9A3 / IMCR9A3 */ - { 0, 0, 0, 0, - USB0_USB0I1, USB0_USB0I0, USB1_USB1I1, USB1_USB1I0 } }, - { 0xe69500a8, 0xe69500e8, 8, /* IMR10A3 / IMCR10A3 */ - { USBHSDMAC1_USHDMI, 0, 0, 0, - 0, 0, 0, 0 } }, -}; - -static struct intc_prio_reg intca_prio_registers[] __initdata = { - { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, 0 } }, - { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } }, - { 0xe6940008, 0, 16, 4, /* IPRCA */ { 0, CRYPT_STD, - CMT1_CMT11, AP_ARM1 } }, - { 0xe694000c, 0, 16, 4, /* IPRDA */ { 0, 0, - CMT1_CMT12, 0 } }, - { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC1_1, MFI_MFIS, - MFI_MFIM, 0 } }, - { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC1_2, - _3DG_SGX540, CMT1_CMT10 } }, - { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1, - SCIFA2, SCIFA3 } }, - { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBHSDMAC0_USHDMI, - FLCTL, SDHI0 } }, - { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, - 0/* MSU */, IIC1 } }, - { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, - 0/* MSUG */, TTI20 } }, - { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } }, - { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, 0, 0, 0 } }, - { 0xe6940030, 0, 16, 4, /* IPRMA */ { 0, CMT3, 0, RWDT0 } }, - { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } }, - { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } }, - { 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } }, - { 0xe6950024, 0, 16, 4, /* IPRJA3 */ { 0, 0, 0, HDMI } }, - { 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } }, - { 0xe695002c, 0, 16, 4, /* IPRLA3 */ { 0, 0, 0, MIPI_HSI } }, - { 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUD, 0, - CEC_1, CEC_2 } }, - { 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } }, - { 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S, - CMT14, CMT15 } }, - { 0xe695003c, 0, 16, 4, /* IPRPA3 */ { 0, 0, - MMC_MMC_ERR, MMC_MMC_NOR } }, - { 0xe6950040, 0, 16, 4, /* IPRQA3 */ { IIC4_ALI4, IIC4_TACKI4, - IIC4_WAITI4, IIC4_DTEI4 } }, - { 0xe6950044, 0, 16, 4, /* IPRRA3 */ { IIC3_ALI3, IIC3_TACKI3, - IIC3_WAITI3, IIC3_DTEI3 } }, - { 0xe6950048, 0, 16, 4, /* IPRSA3 */ { 0/*ERI*/, 0/*RXI*/, - 0/*TXI*/, 0/*TEI*/} }, - { 0xe695004c, 0, 16, 4, /* IPRTA3 */ { USB0_USB0I1, USB0_USB0I0, - USB1_USB1I1, USB1_USB1I0 } }, - { 0xe6950050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } }, -}; - -static DECLARE_INTC_DESC(intca_desc, "sh7372-intca", - intca_vectors, intca_groups, - intca_mask_registers, intca_prio_registers, - NULL); - -INTC_IRQ_PINS_16(intca_irq_pins_lo, 0xe6900000, - INTC_VECT, "sh7372-intca-irq-lo"); - -INTC_IRQ_PINS_16H(intca_irq_pins_hi, 0xe6900000, - INTC_VECT, "sh7372-intca-irq-hi"); - -enum { - UNUSED_INTCS = 0, - ENABLED_INTCS, - - /* interrupt sources INTCS */ - - /* IRQ0S - IRQ31S */ - VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3, - RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3, - CEU, BEU_BEU0, BEU_BEU1, BEU_BEU2, - /* MFI */ - /* BBIF2 */ - VPU, - TSIF1, - /* 3DG */ - _2DDMAC, - IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2, - IPMMU_IPMMUR, IPMMU_IPMMUR2, - RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR, - /* KEYSC */ - /* TTI20 */ - MSIOF, - IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0, - TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, - CMT0, - TSIF0, - /* CMT2 */ - LMB, - CTI, - /* RWDT0 */ - ICB, - JPU_JPEG, - LCDC, - LCRC, - RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3, - RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR, - ISP, - LCDC1, - CSIRX, - DSITX_DSITX0, - DSITX_DSITX1, - /* SPU2 */ - /* FSI */ - /* FMSI */ - /* HDMI */ - TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2, - CMT4, - DSITX1_DSITX1_0, - DSITX1_DSITX1_1, - MFIS2_INTCS, /* Priority always enabled using ENABLED_INTCS */ - CPORTS2R, - /* CEC */ - JPU6E, - - /* interrupt groups INTCS */ - RTDMAC_1, RTDMAC_2, VEU, BEU, IIC0, IPMMU, IIC2, - RTDMAC2_1, RTDMAC2_2, TMU1, DSITX, -}; - -static struct intc_vect intcs_vectors[] = { - /* IRQ0S - IRQ31S */ - INTCS_VECT(VEU_VEU0, 0x700), INTCS_VECT(VEU_VEU1, 0x720), - INTCS_VECT(VEU_VEU2, 0x740), INTCS_VECT(VEU_VEU3, 0x760), - INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820), - INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860), - INTCS_VECT(CEU, 0x880), INTCS_VECT(BEU_BEU0, 0x8a0), - INTCS_VECT(BEU_BEU1, 0x8c0), INTCS_VECT(BEU_BEU2, 0x8e0), - /* MFI */ - /* BBIF2 */ - INTCS_VECT(VPU, 0x980), - INTCS_VECT(TSIF1, 0x9a0), - /* 3DG */ - INTCS_VECT(_2DDMAC, 0xa00), - INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0), - INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0), - INTCS_VECT(IPMMU_IPMMUR, 0xb00), INTCS_VECT(IPMMU_IPMMUR2, 0xb20), - INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0), - INTCS_VECT(RTDMAC_2_DADERR, 0xbc0), - /* KEYSC */ - /* TTI20 */ - INTCS_VECT(MSIOF, 0x0d20), - INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20), - INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60), - INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0), - INTCS_VECT(TMU_TUNI2, 0xec0), - INTCS_VECT(CMT0, 0xf00), - INTCS_VECT(TSIF0, 0xf20), - /* CMT2 */ - INTCS_VECT(LMB, 0xf60), - INTCS_VECT(CTI, 0x400), - /* RWDT0 */ - INTCS_VECT(ICB, 0x480), - INTCS_VECT(JPU_JPEG, 0x560), - INTCS_VECT(LCDC, 0x580), - INTCS_VECT(LCRC, 0x5a0), - INTCS_VECT(RTDMAC2_1_DEI0, 0x1300), INTCS_VECT(RTDMAC2_1_DEI1, 0x1320), - INTCS_VECT(RTDMAC2_1_DEI2, 0x1340), INTCS_VECT(RTDMAC2_1_DEI3, 0x1360), - INTCS_VECT(RTDMAC2_2_DEI4, 0x1380), INTCS_VECT(RTDMAC2_2_DEI5, 0x13a0), - INTCS_VECT(RTDMAC2_2_DADERR, 0x13c0), - INTCS_VECT(ISP, 0x1720), - INTCS_VECT(LCDC1, 0x1780), - INTCS_VECT(CSIRX, 0x17a0), - INTCS_VECT(DSITX_DSITX0, 0x17c0), - INTCS_VECT(DSITX_DSITX1, 0x17e0), - /* SPU2 */ - /* FSI */ - /* FMSI */ - /* HDMI */ - INTCS_VECT(TMU1_TUNI0, 0x1900), INTCS_VECT(TMU1_TUNI1, 0x1920), - INTCS_VECT(TMU1_TUNI2, 0x1940), - INTCS_VECT(CMT4, 0x1980), - INTCS_VECT(DSITX1_DSITX1_0, 0x19a0), - INTCS_VECT(DSITX1_DSITX1_1, 0x19c0), - INTCS_VECT(MFIS2_INTCS, 0x1a00), - INTCS_VECT(CPORTS2R, 0x1a20), - /* CEC */ - INTCS_VECT(JPU6E, 0x1a80), -}; - -static struct intc_group intcs_groups[] __initdata = { - INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI0, RTDMAC_1_DEI1, - RTDMAC_1_DEI2, RTDMAC_1_DEI3), - INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR), - INTC_GROUP(VEU, VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3), - INTC_GROUP(BEU, BEU_BEU0, BEU_BEU1, BEU_BEU2), - INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0), - INTC_GROUP(IPMMU, IPMMU_IPMMUR, IPMMU_IPMMUR2), - INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2), - INTC_GROUP(RTDMAC2_1, RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, - RTDMAC2_1_DEI2, RTDMAC2_1_DEI3), - INTC_GROUP(RTDMAC2_2, RTDMAC2_2_DEI4, - RTDMAC2_2_DEI5, RTDMAC2_2_DADERR), - INTC_GROUP(TMU1, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0), - INTC_GROUP(DSITX, DSITX_DSITX0, DSITX_DSITX1), -}; - -static struct intc_mask_reg intcs_mask_registers[] = { - { 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */ - { BEU_BEU2, BEU_BEU1, BEU_BEU0, CEU, - VEU_VEU3, VEU_VEU2, VEU_VEU1, VEU_VEU0 } }, - { 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */ - { 0, 0, 0, VPU, - 0, 0, 0, 0 } }, - { 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */ - { 0, 0, 0, _2DDMAC, - 0, 0, 0, ICB } }, - { 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */ - { 0, 0, 0, CTI, - JPU_JPEG, 0, LCRC, LCDC } }, - { 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */ - { 0, RTDMAC_2_DADERR, RTDMAC_2_DEI5, RTDMAC_2_DEI4, - RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } }, - { 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */ - { 0, 0, MSIOF, 0, - 0, 0, 0, 0 } }, - { 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */ - { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0, - 0, 0, 0, 0 } }, - { 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */ - { 0, 0, 0, CMT0, - IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } }, - { 0xffd201a8, 0xffd201e8, 8, /* IMR10SA / IMCR10SA */ - { 0, 0, IPMMU_IPMMUR2, IPMMU_IPMMUR, - 0, 0, 0, 0 } }, - { 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */ - { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0, - 0, TSIF1, LMB, TSIF0 } }, - { 0xffd50180, 0xffd501c0, 8, /* IMR0SA3 / IMCR0SA3 */ - { 0, RTDMAC2_2_DADERR, RTDMAC2_2_DEI5, RTDMAC2_2_DEI4, - RTDMAC2_1_DEI3, RTDMAC2_1_DEI2, RTDMAC2_1_DEI1, RTDMAC2_1_DEI0 } }, - { 0xffd50190, 0xffd501d0, 8, /* IMR4SA3 / IMCR4SA3 */ - { 0, ISP, 0, 0, - LCDC1, CSIRX, DSITX_DSITX0, DSITX_DSITX1 } }, - { 0xffd50198, 0xffd501d8, 8, /* IMR6SA3 / IMCR6SA3 */ - { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0, - CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, 0 } }, - { 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */ - { MFIS2_INTCS, CPORTS2R, 0, 0, - JPU6E, 0, 0, 0 } }, -}; - -/* Priority is needed for INTCA to receive the INTCS interrupt */ -static struct intc_prio_reg intcs_prio_registers[] = { - { 0xffd20000, 0, 16, 4, /* IPRAS */ { CTI, 0, _2DDMAC, ICB } }, - { 0xffd20004, 0, 16, 4, /* IPRBS */ { JPU_JPEG, LCDC, 0, LCRC } }, - { 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_1, CEU, 0, VPU } }, - { 0xffd20014, 0, 16, 4, /* IPRFS */ { 0, RTDMAC_2, 0, CMT0 } }, - { 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU_TUNI0, TMU_TUNI1, - TMU_TUNI2, TSIF1 } }, - { 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0, VEU, BEU } }, - { 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, IIC0 } }, - { 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, 0, LMB, 0 } }, - { 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, 0, 0 } }, - { 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } }, - { 0xffd50000, 0, 16, 4, /* IPRAS3 */ { RTDMAC2_1, 0, 0, 0 } }, - { 0xffd50004, 0, 16, 4, /* IPRBS3 */ { RTDMAC2_2, 0, 0, 0 } }, - { 0xffd50020, 0, 16, 4, /* IPRIS3 */ { 0, ISP, 0, 0 } }, - { 0xffd50024, 0, 16, 4, /* IPRJS3 */ { LCDC1, CSIRX, DSITX, 0 } }, - { 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, 0 } }, - { 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, DSITX1_DSITX1_0, - DSITX1_DSITX1_1, 0 } }, - { 0xffd50038, 0, 16, 4, /* IPROS3 */ { ENABLED_INTCS, CPORTS2R, - 0, 0 } }, - { 0xffd5003c, 0, 16, 4, /* IPRPS3 */ { JPU6E, 0, 0, 0 } }, -}; - -static struct resource intcs_resources[] __initdata = { - [0] = { - .start = 0xffd20000, - .end = 0xffd201ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0xffd50000, - .end = 0xffd501ff, - .flags = IORESOURCE_MEM, - } -}; - -static struct intc_desc intcs_desc __initdata = { - .name = "sh7372-intcs", - .force_enable = ENABLED_INTCS, - .skip_syscore_suspend = true, - .resource = intcs_resources, - .num_resources = ARRAY_SIZE(intcs_resources), - .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers, - intcs_prio_registers, NULL, NULL), -}; - -static void intcs_demux(unsigned int irq, struct irq_desc *desc) -{ - void __iomem *reg = (void *)irq_get_handler_data(irq); - unsigned int evtcodeas = ioread32(reg); - - generic_handle_irq(intcs_evt2irq(evtcodeas)); -} - -static void __iomem *intcs_ffd2; -static void __iomem *intcs_ffd5; - -void __init sh7372_init_irq(void) -{ - void __iomem *intevtsa; - int n; - - intcs_ffd2 = ioremap_nocache(0xffd20000, PAGE_SIZE); - intevtsa = intcs_ffd2 + 0x100; - intcs_ffd5 = ioremap_nocache(0xffd50000, PAGE_SIZE); - - register_intc_controller(&intca_desc); - register_intc_controller(&intca_irq_pins_lo_desc); - register_intc_controller(&intca_irq_pins_hi_desc); - register_intc_controller(&intcs_desc); - - /* setup dummy cascade chip for INTCS */ - n = evt2irq(0xf80); - irq_alloc_desc_at(n, numa_node_id()); - irq_set_chip_and_handler_name(n, &dummy_irq_chip, - handle_level_irq, "level"); - set_irq_flags(n, IRQF_VALID); /* yuck */ - - /* demux using INTEVTSA */ - irq_set_handler_data(n, (void *)intevtsa); - irq_set_chained_handler(n, intcs_demux); - - /* unmask INTCS in INTAMASK */ - iowrite16(0, intcs_ffd2 + 0x104); -} - -static unsigned short ffd2[0x200]; -static unsigned short ffd5[0x100]; - -void sh7372_intcs_suspend(void) -{ - int k; - - for (k = 0x00; k <= 0x30; k += 4) - ffd2[k] = __raw_readw(intcs_ffd2 + k); - - for (k = 0x80; k <= 0xb0; k += 4) - ffd2[k] = __raw_readb(intcs_ffd2 + k); - - for (k = 0x180; k <= 0x188; k += 4) - ffd2[k] = __raw_readb(intcs_ffd2 + k); - - for (k = 0x00; k <= 0x3c; k += 4) - ffd5[k] = __raw_readw(intcs_ffd5 + k); - - for (k = 0x80; k <= 0x9c; k += 4) - ffd5[k] = __raw_readb(intcs_ffd5 + k); -} - -void sh7372_intcs_resume(void) -{ - int k; - - for (k = 0x00; k <= 0x30; k += 4) - __raw_writew(ffd2[k], intcs_ffd2 + k); - - for (k = 0x80; k <= 0xb0; k += 4) - __raw_writeb(ffd2[k], intcs_ffd2 + k); - - for (k = 0x180; k <= 0x188; k += 4) - __raw_writeb(ffd2[k], intcs_ffd2 + k); - - for (k = 0x00; k <= 0x3c; k += 4) - __raw_writew(ffd5[k], intcs_ffd5 + k); - - for (k = 0x80; k <= 0x9c; k += 4) - __raw_writeb(ffd5[k], intcs_ffd5 + k); -} - -#define E694_BASE IOMEM(0xe6940000) -#define E695_BASE IOMEM(0xe6950000) - -static unsigned short e694[0x200]; -static unsigned short e695[0x200]; - -void sh7372_intca_suspend(void) -{ - int k; - - for (k = 0x00; k <= 0x38; k += 4) - e694[k] = __raw_readw(E694_BASE + k); - - for (k = 0x80; k <= 0xb4; k += 4) - e694[k] = __raw_readb(E694_BASE + k); - - for (k = 0x180; k <= 0x1b4; k += 4) - e694[k] = __raw_readb(E694_BASE + k); - - for (k = 0x00; k <= 0x50; k += 4) - e695[k] = __raw_readw(E695_BASE + k); - - for (k = 0x80; k <= 0xa8; k += 4) - e695[k] = __raw_readb(E695_BASE + k); - - for (k = 0x180; k <= 0x1a8; k += 4) - e695[k] = __raw_readb(E695_BASE + k); -} - -void sh7372_intca_resume(void) -{ - int k; - - for (k = 0x00; k <= 0x38; k += 4) - __raw_writew(e694[k], E694_BASE + k); - - for (k = 0x80; k <= 0xb4; k += 4) - __raw_writeb(e694[k], E694_BASE + k); - - for (k = 0x180; k <= 0x1b4; k += 4) - __raw_writeb(e694[k], E694_BASE + k); - - for (k = 0x00; k <= 0x50; k += 4) - __raw_writew(e695[k], E695_BASE + k); - - for (k = 0x80; k <= 0xa8; k += 4) - __raw_writeb(e695[k], E695_BASE + k); - - for (k = 0x180; k <= 0x1a8; k += 4) - __raw_writeb(e695[k], E695_BASE + k); -} diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 9e3618028acc..fd63ae6532fc 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -252,11 +252,6 @@ static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id) return IRQ_HANDLED; } -static int sh73a0_set_wake(struct irq_data *data, unsigned int on) -{ - return 0; /* always allow wakeup */ -} - #define PINTER0_PHYS 0xe69000a0 #define PINTER1_PHYS 0xe69000a4 #define PINTER0_VIRT IOMEM(0xe69000a0) @@ -318,8 +313,8 @@ void __init sh73a0_init_irq(void) void __iomem *gic_cpu_base = IOMEM(0xf0000100); void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); + gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE); gic_init(0, 29, gic_dist_base, gic_cpu_base); - gic_arch_extn.irq_set_wake = sh73a0_set_wake; register_intc_controller(&intcs_desc); register_intc_controller(&intc_pint0_desc); diff --git a/arch/arm/mach-shmobile/pm-r8a7790.c b/arch/arm/mach-shmobile/pm-r8a7790.c deleted file mode 100644 index 80e8d95e54d3..000000000000 --- a/arch/arm/mach-shmobile/pm-r8a7790.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * r8a7790 Power management support - * - * Copyright (C) 2013 Renesas Electronics Corporation - * Copyright (C) 2011 Renesas Solutions Corp. - * Copyright (C) 2011 Magnus Damm - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/kernel.h> -#include <linux/smp.h> -#include <asm/io.h> -#include "common.h" -#include "pm-rcar.h" -#include "r8a7790.h" - -/* RST */ -#define RST 0xe6160000 -#define CA15BAR 0x0020 -#define CA7BAR 0x0030 -#define CA15RESCNT 0x0040 -#define CA7RESCNT 0x0044 - -/* On-chip RAM */ -#define MERAM 0xe8080000 - -/* SYSC */ -#define SYSCIER 0x0c -#define SYSCIMR 0x10 - -#if defined(CONFIG_SMP) - -static void __init r8a7790_sysc_init(void) -{ - void __iomem *base = rcar_sysc_init(0xe6180000); - - /* enable all interrupt sources, but do not use interrupt handler */ - iowrite32(0x0131000e, base + SYSCIER); - iowrite32(0, base + SYSCIMR); -} - -#else /* CONFIG_SMP */ - -static inline void r8a7790_sysc_init(void) {} - -#endif /* CONFIG_SMP */ - -void __init r8a7790_pm_init(void) -{ - void __iomem *p; - u32 bar; - static int once; - - if (once++) - return; - - /* MERAM for jump stub, because BAR requires 256KB aligned address */ - p = ioremap_nocache(MERAM, shmobile_boot_size); - memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size); - iounmap(p); - - /* setup reset vectors */ - p = ioremap_nocache(RST, 0x63); - bar = (MERAM >> 8) & 0xfffffc00; - writel_relaxed(bar, p + CA15BAR); - writel_relaxed(bar, p + CA7BAR); - writel_relaxed(bar | 0x10, p + CA15BAR); - writel_relaxed(bar | 0x10, p + CA7BAR); - - /* de-assert reset for all CPUs */ - writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000, - p + CA15RESCNT); - writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000, - p + CA7RESCNT); - iounmap(p); - - r8a7790_sysc_init(); - shmobile_smp_apmu_suspend_init(); -} diff --git a/arch/arm/mach-shmobile/pm-r8a7791.c b/arch/arm/mach-shmobile/pm-r8a7791.c deleted file mode 100644 index 25f107bb3657..000000000000 --- a/arch/arm/mach-shmobile/pm-r8a7791.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * r8a7791 Power management support - * - * Copyright (C) 2014 Renesas Electronics Corporation - * Copyright (C) 2011 Renesas Solutions Corp. - * Copyright (C) 2011 Magnus Damm - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/kernel.h> -#include <linux/smp.h> -#include <asm/io.h> -#include "common.h" -#include "pm-rcar.h" -#include "r8a7791.h" - -#define RST 0xe6160000 -#define CA15BAR 0x0020 -#define CA15RESCNT 0x0040 -#define RAM 0xe6300000 - -/* SYSC */ -#define SYSCIER 0x0c -#define SYSCIMR 0x10 - -#if defined(CONFIG_SMP) - -static void __init r8a7791_sysc_init(void) -{ - void __iomem *base = rcar_sysc_init(0xe6180000); - - /* enable all interrupt sources, but do not use interrupt handler */ - iowrite32(0x0131000e, base + SYSCIER); - iowrite32(0, base + SYSCIMR); -} - -#else /* CONFIG_SMP */ - -static inline void r8a7791_sysc_init(void) {} - -#endif /* CONFIG_SMP */ - -void __init r8a7791_pm_init(void) -{ - void __iomem *p; - u32 bar; - static int once; - - if (once++) - return; - - /* RAM for jump stub, because BAR requires 256KB aligned address */ - p = ioremap_nocache(RAM, shmobile_boot_size); - memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size); - iounmap(p); - - /* setup reset vectors */ - p = ioremap_nocache(RST, 0x63); - bar = (RAM >> 8) & 0xfffffc00; - writel_relaxed(bar, p + CA15BAR); - writel_relaxed(bar | 0x10, p + CA15BAR); - - /* enable clocks to all CPUs */ - writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000, - p + CA15RESCNT); - iounmap(p); - - r8a7791_sysc_init(); - shmobile_smp_apmu_suspend_init(); -} diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c new file mode 100644 index 000000000000..6815781ad116 --- /dev/null +++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c @@ -0,0 +1,115 @@ +/* + * R-Car Generation 2 Power management support + * + * Copyright (C) 2013 - 2015 Renesas Electronics Corporation + * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2011 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/smp.h> +#include <asm/io.h> +#include "common.h" +#include "pm-rcar.h" +#include "rcar-gen2.h" + +/* RST */ +#define RST 0xe6160000 +#define CA15BAR 0x0020 +#define CA7BAR 0x0030 +#define CA15RESCNT 0x0040 +#define CA7RESCNT 0x0044 + +/* On-chip RAM */ +#define MERAM 0xe8080000 +#define RAM 0xe6300000 + +/* SYSC */ +#define SYSCIER 0x0c +#define SYSCIMR 0x10 + +#if defined(CONFIG_SMP) + +static void __init rcar_gen2_sysc_init(u32 syscier) +{ + void __iomem *base = rcar_sysc_init(0xe6180000); + + /* enable all interrupt sources, but do not use interrupt handler */ + iowrite32(syscier, base + SYSCIER); + iowrite32(0, base + SYSCIMR); +} + +#else /* CONFIG_SMP */ + +static inline void rcar_gen2_sysc_init(u32 syscier) {} + +#endif /* CONFIG_SMP */ + +void __init rcar_gen2_pm_init(void) +{ + void __iomem *p; + u32 bar; + static int once; + struct device_node *np, *cpus; + bool has_a7 = false; + bool has_a15 = false; + phys_addr_t boot_vector_addr = 0; + u32 syscier = 0; + + if (once++) + return; + + cpus = of_find_node_by_path("/cpus"); + if (!cpus) + return; + + for_each_child_of_node(cpus, np) { + if (of_device_is_compatible(np, "arm,cortex-a15")) + has_a15 = true; + else if (of_device_is_compatible(np, "arm,cortex-a7")) + has_a7 = true; + } + + if (of_machine_is_compatible("renesas,r8a7790")) { + boot_vector_addr = MERAM; + syscier = 0x013111ef; + + } else if (of_machine_is_compatible("renesas,r8a7791")) { + boot_vector_addr = RAM; + syscier = 0x00111003; + } + + /* RAM for jump stub, because BAR requires 256KB aligned address */ + p = ioremap_nocache(boot_vector_addr, shmobile_boot_size); + memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size); + iounmap(p); + + /* setup reset vectors */ + p = ioremap_nocache(RST, 0x63); + bar = (boot_vector_addr >> 8) & 0xfffffc00; + if (has_a15) { + writel_relaxed(bar, p + CA15BAR); + writel_relaxed(bar | 0x10, p + CA15BAR); + + /* de-assert reset for CA15 CPUs */ + writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | + 0xa5a50000, p + CA15RESCNT); + } + if (has_a7) { + writel_relaxed(bar, p + CA7BAR); + writel_relaxed(bar | 0x10, p + CA7BAR); + + /* de-assert reset for CA7 CPUs */ + writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | + 0x5a5a0000, p + CA7RESCNT); + } + iounmap(p); + + rcar_gen2_sysc_init(syscier); + shmobile_smp_apmu_suspend_init(); +} diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c deleted file mode 100644 index c0293ae4b013..000000000000 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ /dev/null @@ -1,549 +0,0 @@ -/* - * sh7372 Power management support - * - * Copyright (C) 2011 Magnus Damm - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/pm.h> -#include <linux/suspend.h> -#include <linux/cpuidle.h> -#include <linux/module.h> -#include <linux/list.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/pm_clock.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/bitrev.h> -#include <linux/console.h> - -#include <asm/cpuidle.h> -#include <asm/io.h> -#include <asm/tlbflush.h> -#include <asm/suspend.h> - -#include "common.h" -#include "pm-rmobile.h" -#include "sh7372.h" - -/* DBG */ -#define DBGREG1 IOMEM(0xe6100020) -#define DBGREG9 IOMEM(0xe6100040) - -/* CPGA */ -#define SYSTBCR IOMEM(0xe6150024) -#define MSTPSR0 IOMEM(0xe6150030) -#define MSTPSR1 IOMEM(0xe6150038) -#define MSTPSR2 IOMEM(0xe6150040) -#define MSTPSR3 IOMEM(0xe6150048) -#define MSTPSR4 IOMEM(0xe615004c) -#define PLLC01STPCR IOMEM(0xe61500c8) - -/* SYSC */ -#define SYSC_BASE IOMEM(0xe6180000) - -#define SBAR IOMEM(0xe6180020) -#define WUPRMSK IOMEM(0xe6180028) -#define WUPSMSK IOMEM(0xe618002c) -#define WUPSMSK2 IOMEM(0xe6180048) -#define WUPSFAC IOMEM(0xe6180098) -#define IRQCR IOMEM(0xe618022c) -#define IRQCR2 IOMEM(0xe6180238) -#define IRQCR3 IOMEM(0xe6180244) -#define IRQCR4 IOMEM(0xe6180248) -#define PDNSEL IOMEM(0xe6180254) - -/* INTC */ -#define ICR1A IOMEM(0xe6900000) -#define ICR2A IOMEM(0xe6900004) -#define ICR3A IOMEM(0xe6900008) -#define ICR4A IOMEM(0xe690000c) -#define INTMSK00A IOMEM(0xe6900040) -#define INTMSK10A IOMEM(0xe6900044) -#define INTMSK20A IOMEM(0xe6900048) -#define INTMSK30A IOMEM(0xe690004c) - -/* MFIS */ -/* FIXME: pointing where? */ -#define SMFRAM 0xe6a70000 - -/* AP-System Core */ -#define APARMBAREA IOMEM(0xe6f10020) - -#ifdef CONFIG_PM - -#define PM_DOMAIN_ON_OFF_LATENCY_NS 250000 - -static int sh7372_a4r_pd_suspend(void) -{ - sh7372_intcs_suspend(); - __raw_writel(0x300fffff, WUPRMSK); /* avoid wakeup */ - return 0; -} - -static bool a4s_suspend_ready; - -static int sh7372_a4s_pd_suspend(void) -{ - /* - * The A4S domain contains the CPU core and therefore it should - * only be turned off if the CPU is not in use. This may happen - * during system suspend, when SYSC is going to be used for generating - * resume signals and a4s_suspend_ready is set to let - * sh7372_enter_suspend() know that it can turn A4S off. - */ - a4s_suspend_ready = true; - return -EBUSY; -} - -static void sh7372_a4s_pd_resume(void) -{ - a4s_suspend_ready = false; -} - -static int sh7372_a3sp_pd_suspend(void) -{ - /* - * Serial consoles make use of SCIF hardware located in A3SP, - * keep such power domain on if "no_console_suspend" is set. - */ - return console_suspend_enabled ? 0 : -EBUSY; -} - -static struct rmobile_pm_domain sh7372_pm_domains[] = { - { - .genpd.name = "A4LC", - .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, - .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, - .base = SYSC_BASE, - .bit_shift = 1, - }, - { - .genpd.name = "A4MP", - .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, - .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, - .base = SYSC_BASE, - .bit_shift = 2, - }, - { - .genpd.name = "D4", - .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, - .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, - .base = SYSC_BASE, - .bit_shift = 3, - }, - { - .genpd.name = "A4R", - .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, - .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, - .base = SYSC_BASE, - .bit_shift = 5, - .suspend = sh7372_a4r_pd_suspend, - .resume = sh7372_intcs_resume, - }, - { - .genpd.name = "A3RV", - .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, - .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, - .base = SYSC_BASE, - .bit_shift = 6, - }, - { - .genpd.name = "A3RI", - .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, - .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, - .base = SYSC_BASE, - .bit_shift = 8, - }, - { - .genpd.name = "A4S", - .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, - .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, - .base = SYSC_BASE, - .bit_shift = 10, - .gov = &pm_domain_always_on_gov, - .no_debug = true, - .suspend = sh7372_a4s_pd_suspend, - .resume = sh7372_a4s_pd_resume, - }, - { - .genpd.name = "A3SP", - .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, - .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, - .base = SYSC_BASE, - .bit_shift = 11, - .gov = &pm_domain_always_on_gov, - .no_debug = true, - .suspend = sh7372_a3sp_pd_suspend, - }, - { - .genpd.name = "A3SG", - .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, - .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, - .base = SYSC_BASE, - .bit_shift = 13, - }, -}; - -void __init sh7372_init_pm_domains(void) -{ - rmobile_init_domains(sh7372_pm_domains, ARRAY_SIZE(sh7372_pm_domains)); - pm_genpd_add_subdomain_names("A4LC", "A3RV"); - pm_genpd_add_subdomain_names("A4R", "A4LC"); - pm_genpd_add_subdomain_names("A4S", "A3SG"); - pm_genpd_add_subdomain_names("A4S", "A3SP"); -} - -#endif /* CONFIG_PM */ - -#if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE) -static void sh7372_set_reset_vector(unsigned long address) -{ - /* set reset vector, translate 4k */ - __raw_writel(address, SBAR); - __raw_writel(0, APARMBAREA); -} - -static void sh7372_enter_sysc(int pllc0_on, unsigned long sleep_mode) -{ - if (pllc0_on) - __raw_writel(0, PLLC01STPCR); - else - __raw_writel(1 << 28, PLLC01STPCR); - - __raw_readl(WUPSFAC); /* read wakeup int. factor before sleep */ - cpu_suspend(sleep_mode, sh7372_do_idle_sysc); - __raw_readl(WUPSFAC); /* read wakeup int. factor after wakeup */ - - /* disable reset vector translation */ - __raw_writel(0, SBAR); -} - -static int sh7372_sysc_valid(unsigned long *mskp, unsigned long *msk2p) -{ - unsigned long mstpsr0, mstpsr1, mstpsr2, mstpsr3, mstpsr4; - unsigned long msk, msk2; - - /* check active clocks to determine potential wakeup sources */ - - mstpsr0 = __raw_readl(MSTPSR0); - if ((mstpsr0 & 0x00000003) != 0x00000003) { - pr_debug("sh7372 mstpsr0 0x%08lx\n", mstpsr0); - return 0; - } - - mstpsr1 = __raw_readl(MSTPSR1); - if ((mstpsr1 & 0xff079b7f) != 0xff079b7f) { - pr_debug("sh7372 mstpsr1 0x%08lx\n", mstpsr1); - return 0; - } - - mstpsr2 = __raw_readl(MSTPSR2); - if ((mstpsr2 & 0x000741ff) != 0x000741ff) { - pr_debug("sh7372 mstpsr2 0x%08lx\n", mstpsr2); - return 0; - } - - mstpsr3 = __raw_readl(MSTPSR3); - if ((mstpsr3 & 0x1a60f010) != 0x1a60f010) { - pr_debug("sh7372 mstpsr3 0x%08lx\n", mstpsr3); - return 0; - } - - mstpsr4 = __raw_readl(MSTPSR4); - if ((mstpsr4 & 0x00008cf0) != 0x00008cf0) { - pr_debug("sh7372 mstpsr4 0x%08lx\n", mstpsr4); - return 0; - } - - msk = 0; - msk2 = 0; - - /* make bitmaps of limited number of wakeup sources */ - - if ((mstpsr2 & (1 << 23)) == 0) /* SPU2 */ - msk |= 1 << 31; - - if ((mstpsr2 & (1 << 12)) == 0) /* MFI_MFIM */ - msk |= 1 << 21; - - if ((mstpsr4 & (1 << 3)) == 0) /* KEYSC */ - msk |= 1 << 2; - - if ((mstpsr1 & (1 << 24)) == 0) /* CMT0 */ - msk |= 1 << 1; - - if ((mstpsr3 & (1 << 29)) == 0) /* CMT1 */ - msk |= 1 << 1; - - if ((mstpsr4 & (1 << 0)) == 0) /* CMT2 */ - msk |= 1 << 1; - - if ((mstpsr2 & (1 << 13)) == 0) /* MFI_MFIS */ - msk2 |= 1 << 17; - - *mskp = msk; - *msk2p = msk2; - - return 1; -} - -static void sh7372_icr_to_irqcr(unsigned long icr, u16 *irqcr1p, u16 *irqcr2p) -{ - u16 tmp, irqcr1, irqcr2; - int k; - - irqcr1 = 0; - irqcr2 = 0; - - /* convert INTCA ICR register layout to SYSC IRQCR+IRQCR2 */ - for (k = 0; k <= 7; k++) { - tmp = (icr >> ((7 - k) * 4)) & 0xf; - irqcr1 |= (tmp & 0x03) << (k * 2); - irqcr2 |= (tmp >> 2) << (k * 2); - } - - *irqcr1p = irqcr1; - *irqcr2p = irqcr2; -} - -static void sh7372_setup_sysc(unsigned long msk, unsigned long msk2) -{ - u16 irqcrx_low, irqcrx_high, irqcry_low, irqcry_high; - unsigned long tmp; - - /* read IRQ0A -> IRQ15A mask */ - tmp = bitrev8(__raw_readb(INTMSK00A)); - tmp |= bitrev8(__raw_readb(INTMSK10A)) << 8; - - /* setup WUPSMSK from clocks and external IRQ mask */ - msk = (~msk & 0xc030000f) | (tmp << 4); - __raw_writel(msk, WUPSMSK); - - /* propage level/edge trigger for external IRQ 0->15 */ - sh7372_icr_to_irqcr(__raw_readl(ICR1A), &irqcrx_low, &irqcry_low); - sh7372_icr_to_irqcr(__raw_readl(ICR2A), &irqcrx_high, &irqcry_high); - __raw_writel((irqcrx_high << 16) | irqcrx_low, IRQCR); - __raw_writel((irqcry_high << 16) | irqcry_low, IRQCR2); - - /* read IRQ16A -> IRQ31A mask */ - tmp = bitrev8(__raw_readb(INTMSK20A)); - tmp |= bitrev8(__raw_readb(INTMSK30A)) << 8; - - /* setup WUPSMSK2 from clocks and external IRQ mask */ - msk2 = (~msk2 & 0x00030000) | tmp; - __raw_writel(msk2, WUPSMSK2); - - /* propage level/edge trigger for external IRQ 16->31 */ - sh7372_icr_to_irqcr(__raw_readl(ICR3A), &irqcrx_low, &irqcry_low); - sh7372_icr_to_irqcr(__raw_readl(ICR4A), &irqcrx_high, &irqcry_high); - __raw_writel((irqcrx_high << 16) | irqcrx_low, IRQCR3); - __raw_writel((irqcry_high << 16) | irqcry_low, IRQCR4); -} - -static void sh7372_enter_a3sm_common(int pllc0_on) -{ - /* use INTCA together with SYSC for wakeup */ - sh7372_setup_sysc(1 << 0, 0); - sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc)); - sh7372_enter_sysc(pllc0_on, 1 << 12); -} - -static void sh7372_enter_a4s_common(int pllc0_on) -{ - sh7372_intca_suspend(); - sh7372_set_reset_vector(SMFRAM); - sh7372_enter_sysc(pllc0_on, 1 << 10); - sh7372_intca_resume(); -} - -static void sh7372_pm_setup_smfram(void) -{ - /* pass physical address of cpu_resume() to assembly resume code */ - sh7372_cpu_resume = virt_to_phys(cpu_resume); - - memcpy((void *)SMFRAM, sh7372_resume_core_standby_sysc, 0x100); -} -#else -static inline void sh7372_pm_setup_smfram(void) {} -#endif /* CONFIG_SUSPEND || CONFIG_CPU_IDLE */ - -#ifdef CONFIG_CPU_IDLE -static int sh7372_do_idle_core_standby(unsigned long unused) -{ - cpu_do_idle(); /* WFI when SYSTBCR == 0x10 -> Core Standby */ - return 0; -} - -static int sh7372_enter_core_standby(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index) -{ - sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc)); - - /* enter sleep mode with SYSTBCR to 0x10 */ - __raw_writel(0x10, SYSTBCR); - cpu_suspend(0, sh7372_do_idle_core_standby); - __raw_writel(0, SYSTBCR); - - /* disable reset vector translation */ - __raw_writel(0, SBAR); - - return 1; -} - -static int sh7372_enter_a3sm_pll_on(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index) -{ - sh7372_enter_a3sm_common(1); - return 2; -} - -static int sh7372_enter_a3sm_pll_off(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index) -{ - sh7372_enter_a3sm_common(0); - return 3; -} - -static int sh7372_enter_a4s(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index) -{ - unsigned long msk, msk2; - - if (!sh7372_sysc_valid(&msk, &msk2)) - return sh7372_enter_a3sm_pll_off(dev, drv, index); - - sh7372_setup_sysc(msk, msk2); - sh7372_enter_a4s_common(0); - return 4; -} - -static struct cpuidle_driver sh7372_cpuidle_driver = { - .name = "sh7372_cpuidle", - .owner = THIS_MODULE, - .state_count = 5, - .safe_state_index = 0, /* C1 */ - .states[0] = ARM_CPUIDLE_WFI_STATE, - .states[1] = { - .name = "C2", - .desc = "Core Standby Mode", - .exit_latency = 10, - .target_residency = 20 + 10, - .enter = sh7372_enter_core_standby, - }, - .states[2] = { - .name = "C3", - .desc = "A3SM PLL ON", - .exit_latency = 20, - .target_residency = 30 + 20, - .enter = sh7372_enter_a3sm_pll_on, - }, - .states[3] = { - .name = "C4", - .desc = "A3SM PLL OFF", - .exit_latency = 120, - .target_residency = 30 + 120, - .enter = sh7372_enter_a3sm_pll_off, - }, - .states[4] = { - .name = "C5", - .desc = "A4S PLL OFF", - .exit_latency = 240, - .target_residency = 30 + 240, - .enter = sh7372_enter_a4s, - .disabled = true, - }, -}; - -static void __init sh7372_cpuidle_init(void) -{ - shmobile_cpuidle_set_driver(&sh7372_cpuidle_driver); -} -#else -static void __init sh7372_cpuidle_init(void) {} -#endif - -#ifdef CONFIG_SUSPEND -static int sh7372_enter_suspend(suspend_state_t suspend_state) -{ - unsigned long msk, msk2; - - /* check active clocks to determine potential wakeup sources */ - if (sh7372_sysc_valid(&msk, &msk2) && a4s_suspend_ready) { - /* convert INTC mask/sense to SYSC mask/sense */ - sh7372_setup_sysc(msk, msk2); - - /* enter A4S sleep with PLLC0 off */ - pr_debug("entering A4S\n"); - sh7372_enter_a4s_common(0); - return 0; - } - - /* default to enter A3SM sleep with PLLC0 off */ - pr_debug("entering A3SM\n"); - sh7372_enter_a3sm_common(0); - return 0; -} - -/** - * sh7372_pm_notifier_fn - SH7372 PM notifier routine. - * @notifier: Unused. - * @pm_event: Event being handled. - * @unused: Unused. - */ -static int sh7372_pm_notifier_fn(struct notifier_block *notifier, - unsigned long pm_event, void *unused) -{ - switch (pm_event) { - case PM_SUSPEND_PREPARE: - /* - * This is necessary, because the A4R domain has to be "on" - * when suspend_device_irqs() and resume_device_irqs() are - * executed during system suspend and resume, respectively, so - * that those functions don't crash while accessing the INTCS. - */ - pm_genpd_name_poweron("A4R"); - break; - case PM_POST_SUSPEND: - pm_genpd_poweroff_unused(); - break; - } - - return NOTIFY_DONE; -} - -static void sh7372_suspend_init(void) -{ - shmobile_suspend_ops.enter = sh7372_enter_suspend; - pm_notifier(sh7372_pm_notifier_fn, 0); -} -#else -static void sh7372_suspend_init(void) {} -#endif - -void __init sh7372_pm_init(void) -{ - /* enable DBG hardware block to kick SYSC */ - __raw_writel(0x0000a500, DBGREG9); - __raw_writel(0x0000a501, DBGREG9); - __raw_writel(0x00000000, DBGREG1); - - /* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */ - __raw_writel(0, PDNSEL); - - sh7372_pm_setup_smfram(); - - sh7372_suspend_init(); - sh7372_cpuidle_init(); -} - -void __init sh7372_pm_init_late(void) -{ - shmobile_init_late(); - pm_genpd_name_attach_cpuidle("A4S", 4); -} diff --git a/arch/arm/mach-shmobile/r8a73a4.h b/arch/arm/mach-shmobile/r8a73a4.h deleted file mode 100644 index 70dcd847a86e..000000000000 --- a/arch/arm/mach-shmobile/r8a73a4.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_R8A73A4_H__ -#define __ASM_R8A73A4_H__ - -/* DMA slave IDs */ -enum { - SHDMA_SLAVE_INVALID, - SHDMA_SLAVE_MMCIF0_TX, - SHDMA_SLAVE_MMCIF0_RX, - SHDMA_SLAVE_MMCIF1_TX, - SHDMA_SLAVE_MMCIF1_RX, -}; - -void r8a73a4_add_standard_devices(void); -void r8a73a4_clock_init(void); -void r8a73a4_pinmux_init(void); - -#endif /* __ASM_R8A73A4_H__ */ diff --git a/arch/arm/mach-shmobile/r8a7790.h b/arch/arm/mach-shmobile/r8a7790.h index bf73a850aaed..1a46d026052c 100644 --- a/arch/arm/mach-shmobile/r8a7790.h +++ b/arch/arm/mach-shmobile/r8a7790.h @@ -1,7 +1,6 @@ #ifndef __ASM_R8A7790_H__ #define __ASM_R8A7790_H__ -void r8a7790_pm_init(void); extern struct smp_operations r8a7790_smp_ops; #endif /* __ASM_R8A7790_H__ */ diff --git a/arch/arm/mach-shmobile/r8a7791.h b/arch/arm/mach-shmobile/r8a7791.h index 6cf11eb69d10..7ca0b7d0f59b 100644 --- a/arch/arm/mach-shmobile/r8a7791.h +++ b/arch/arm/mach-shmobile/r8a7791.h @@ -1,7 +1,6 @@ #ifndef __ASM_R8A7791_H__ #define __ASM_R8A7791_H__ -void r8a7791_pm_init(void); extern struct smp_operations r8a7791_smp_ops; #endif /* __ASM_R8A7791_H__ */ diff --git a/arch/arm/mach-shmobile/rcar-gen2.h b/arch/arm/mach-shmobile/rcar-gen2.h index ce53cb5f53a1..8a66b4aae035 100644 --- a/arch/arm/mach-shmobile/rcar-gen2.h +++ b/arch/arm/mach-shmobile/rcar-gen2.h @@ -5,5 +5,6 @@ void rcar_gen2_timer_init(void); #define MD(nr) BIT(nr) u32 rcar_gen2_read_mode_pins(void); void rcar_gen2_reserve(void); +void rcar_gen2_pm_init(void); #endif /* __ASM_RCAR_GEN2_H__ */ diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c new file mode 100644 index 000000000000..384e6e934b87 --- /dev/null +++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c @@ -0,0 +1,147 @@ +/* + * R-Car Generation 2 da9063/da9210 regulator quirk + * + * The r8a7790/lager and r8a7791/koelsch development boards have da9063 and + * da9210 regulators. Both regulators have their interrupt request lines tied + * to the same interrupt pin (IRQ2) on the SoC. + * + * After cold boot or da9063-induced restart, both the da9063 and da9210 seem + * to assert their interrupt request lines. Hence as soon as one driver + * requests this irq, it gets stuck in an interrupt storm, as it only manages + * to deassert its own interrupt request line, and the other driver hasn't + * installed an interrupt handler yet. + * + * To handle this, install a quirk that masks the interrupts in both the + * da9063 and da9210. This quirk has to run after the i2c master driver has + * been initialized, but before the i2c slave drivers are initialized. + * + * Copyright (C) 2015 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/notifier.h> +#include <linux/of.h> +#include <linux/mfd/da9063/registers.h> + + +#define IRQC_BASE 0xe61c0000 +#define IRQC_MONITOR 0x104 /* IRQn Signal Level Monitor Register */ + +#define REGULATOR_IRQ_MASK BIT(2) /* IRQ2, active low */ + +static void __iomem *irqc; + +static const u8 da9063_mask_regs[] = { + DA9063_REG_IRQ_MASK_A, + DA9063_REG_IRQ_MASK_B, + DA9063_REG_IRQ_MASK_C, + DA9063_REG_IRQ_MASK_D, +}; + +/* DA9210 System Control and Event Registers */ +#define DA9210_REG_MASK_A 0x54 +#define DA9210_REG_MASK_B 0x55 + +static const u8 da9210_mask_regs[] = { + DA9210_REG_MASK_A, + DA9210_REG_MASK_B, +}; + +static void da9xxx_mask_irqs(struct i2c_client *client, const u8 regs[], + unsigned int nregs) +{ + unsigned int i; + + dev_info(&client->dev, "Masking %s interrupt sources\n", client->name); + + for (i = 0; i < nregs; i++) { + int error = i2c_smbus_write_byte_data(client, regs[i], ~0); + if (error) { + dev_err(&client->dev, "i2c error %d\n", error); + return; + } + } +} + +static int regulator_quirk_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + struct i2c_client *client; + u32 mon; + + mon = ioread32(irqc + IRQC_MONITOR); + dev_dbg(dev, "%s: %ld, IRQC_MONITOR = 0x%x\n", __func__, action, mon); + if (mon & REGULATOR_IRQ_MASK) + goto remove; + + if (action != BUS_NOTIFY_ADD_DEVICE || dev->type == &i2c_adapter_type) + return 0; + + client = to_i2c_client(dev); + dev_dbg(dev, "Detected %s\n", client->name); + + if ((client->addr == 0x58 && !strcmp(client->name, "da9063"))) + da9xxx_mask_irqs(client, da9063_mask_regs, + ARRAY_SIZE(da9063_mask_regs)); + else if (client->addr == 0x68 && !strcmp(client->name, "da9210")) + da9xxx_mask_irqs(client, da9210_mask_regs, + ARRAY_SIZE(da9210_mask_regs)); + + mon = ioread32(irqc + IRQC_MONITOR); + if (mon & REGULATOR_IRQ_MASK) + goto remove; + + return 0; + +remove: + dev_info(dev, "IRQ2 is not asserted, removing quirk\n"); + + bus_unregister_notifier(&i2c_bus_type, nb); + iounmap(irqc); + return 0; +} + +static struct notifier_block regulator_quirk_nb = { + .notifier_call = regulator_quirk_notify +}; + +static int __init rcar_gen2_regulator_quirk(void) +{ + u32 mon; + + if (!of_machine_is_compatible("renesas,koelsch") && + !of_machine_is_compatible("renesas,lager")) + return -ENODEV; + + irqc = ioremap(IRQC_BASE, PAGE_SIZE); + if (!irqc) + return -ENOMEM; + + mon = ioread32(irqc + IRQC_MONITOR); + if (mon & REGULATOR_IRQ_MASK) { + pr_debug("%s: IRQ2 is not asserted, not installing quirk\n", + __func__); + iounmap(irqc); + return 0; + } + + pr_info("IRQ2 is asserted, installing da9063/da9210 regulator quirk\n"); + + bus_register_notifier(&i2c_bus_type, ®ulator_quirk_nb); + return 0; +} + +arch_initcall(rcar_gen2_regulator_quirk); diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c index c27682291cbf..446cee611902 100644 --- a/arch/arm/mach-shmobile/setup-r8a73a4.c +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c @@ -13,280 +13,12 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/of_platform.h> -#include <linux/platform_data/irq-renesas-irqc.h> -#include <linux/serial_sci.h> -#include <linux/sh_dma.h> -#include <linux/sh_timer.h> + +#include <linux/init.h> #include <asm/mach/arch.h> #include "common.h" -#include "dma-register.h" -#include "irqs.h" -#include "r8a73a4.h" - -static const struct resource pfc_resources[] = { - DEFINE_RES_MEM(0xe6050000, 0x9000), -}; - -void __init r8a73a4_pinmux_init(void) -{ - platform_device_register_simple("pfc-r8a73a4", -1, pfc_resources, - ARRAY_SIZE(pfc_resources)); -} - -#define R8A73A4_SCIF(scif_type, _scscr, index, baseaddr, irq) \ -static struct plat_sci_port scif##index##_platform_data = { \ - .type = scif_type, \ - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ - .scscr = _scscr, \ -}; \ - \ -static struct resource scif##index##_resources[] = { \ - DEFINE_RES_MEM(baseaddr, 0x100), \ - DEFINE_RES_IRQ(irq), \ -} - -#define R8A73A4_SCIFA(index, baseaddr, irq) \ - R8A73A4_SCIF(PORT_SCIFA, SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \ - index, baseaddr, irq) - -#define R8A73A4_SCIFB(index, baseaddr, irq) \ - R8A73A4_SCIF(PORT_SCIFB, SCSCR_RE | SCSCR_TE, \ - index, baseaddr, irq) - -R8A73A4_SCIFA(0, 0xe6c40000, gic_spi(144)); /* SCIFA0 */ -R8A73A4_SCIFA(1, 0xe6c50000, gic_spi(145)); /* SCIFA1 */ -R8A73A4_SCIFB(2, 0xe6c20000, gic_spi(148)); /* SCIFB0 */ -R8A73A4_SCIFB(3, 0xe6c30000, gic_spi(149)); /* SCIFB1 */ -R8A73A4_SCIFB(4, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */ -R8A73A4_SCIFB(5, 0xe6cf0000, gic_spi(151)); /* SCIFB3 */ - -#define r8a73a4_register_scif(index) \ - platform_device_register_resndata(NULL, "sh-sci", index, \ - scif##index##_resources, \ - ARRAY_SIZE(scif##index##_resources), \ - &scif##index##_platform_data, \ - sizeof(scif##index##_platform_data)) - -static const struct renesas_irqc_config irqc0_data = { - .irq_base = irq_pin(0), /* IRQ0 -> IRQ31 */ -}; - -static const struct resource irqc0_resources[] = { - DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */ - DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */ - DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */ - DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */ - DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */ - DEFINE_RES_IRQ(gic_spi(4)), /* IRQ4 */ - DEFINE_RES_IRQ(gic_spi(5)), /* IRQ5 */ - DEFINE_RES_IRQ(gic_spi(6)), /* IRQ6 */ - DEFINE_RES_IRQ(gic_spi(7)), /* IRQ7 */ - DEFINE_RES_IRQ(gic_spi(8)), /* IRQ8 */ - DEFINE_RES_IRQ(gic_spi(9)), /* IRQ9 */ - DEFINE_RES_IRQ(gic_spi(10)), /* IRQ10 */ - DEFINE_RES_IRQ(gic_spi(11)), /* IRQ11 */ - DEFINE_RES_IRQ(gic_spi(12)), /* IRQ12 */ - DEFINE_RES_IRQ(gic_spi(13)), /* IRQ13 */ - DEFINE_RES_IRQ(gic_spi(14)), /* IRQ14 */ - DEFINE_RES_IRQ(gic_spi(15)), /* IRQ15 */ - DEFINE_RES_IRQ(gic_spi(16)), /* IRQ16 */ - DEFINE_RES_IRQ(gic_spi(17)), /* IRQ17 */ - DEFINE_RES_IRQ(gic_spi(18)), /* IRQ18 */ - DEFINE_RES_IRQ(gic_spi(19)), /* IRQ19 */ - DEFINE_RES_IRQ(gic_spi(20)), /* IRQ20 */ - DEFINE_RES_IRQ(gic_spi(21)), /* IRQ21 */ - DEFINE_RES_IRQ(gic_spi(22)), /* IRQ22 */ - DEFINE_RES_IRQ(gic_spi(23)), /* IRQ23 */ - DEFINE_RES_IRQ(gic_spi(24)), /* IRQ24 */ - DEFINE_RES_IRQ(gic_spi(25)), /* IRQ25 */ - DEFINE_RES_IRQ(gic_spi(26)), /* IRQ26 */ - DEFINE_RES_IRQ(gic_spi(27)), /* IRQ27 */ - DEFINE_RES_IRQ(gic_spi(28)), /* IRQ28 */ - DEFINE_RES_IRQ(gic_spi(29)), /* IRQ29 */ - DEFINE_RES_IRQ(gic_spi(30)), /* IRQ30 */ - DEFINE_RES_IRQ(gic_spi(31)), /* IRQ31 */ -}; - -static const struct renesas_irqc_config irqc1_data = { - .irq_base = irq_pin(32), /* IRQ32 -> IRQ57 */ -}; - -static const struct resource irqc1_resources[] = { - DEFINE_RES_MEM(0xe61c0200, 0x200), /* IRQC Event Detector Block_1 */ - DEFINE_RES_IRQ(gic_spi(32)), /* IRQ32 */ - DEFINE_RES_IRQ(gic_spi(33)), /* IRQ33 */ - DEFINE_RES_IRQ(gic_spi(34)), /* IRQ34 */ - DEFINE_RES_IRQ(gic_spi(35)), /* IRQ35 */ - DEFINE_RES_IRQ(gic_spi(36)), /* IRQ36 */ - DEFINE_RES_IRQ(gic_spi(37)), /* IRQ37 */ - DEFINE_RES_IRQ(gic_spi(38)), /* IRQ38 */ - DEFINE_RES_IRQ(gic_spi(39)), /* IRQ39 */ - DEFINE_RES_IRQ(gic_spi(40)), /* IRQ40 */ - DEFINE_RES_IRQ(gic_spi(41)), /* IRQ41 */ - DEFINE_RES_IRQ(gic_spi(42)), /* IRQ42 */ - DEFINE_RES_IRQ(gic_spi(43)), /* IRQ43 */ - DEFINE_RES_IRQ(gic_spi(44)), /* IRQ44 */ - DEFINE_RES_IRQ(gic_spi(45)), /* IRQ45 */ - DEFINE_RES_IRQ(gic_spi(46)), /* IRQ46 */ - DEFINE_RES_IRQ(gic_spi(47)), /* IRQ47 */ - DEFINE_RES_IRQ(gic_spi(48)), /* IRQ48 */ - DEFINE_RES_IRQ(gic_spi(49)), /* IRQ49 */ - DEFINE_RES_IRQ(gic_spi(50)), /* IRQ50 */ - DEFINE_RES_IRQ(gic_spi(51)), /* IRQ51 */ - DEFINE_RES_IRQ(gic_spi(52)), /* IRQ52 */ - DEFINE_RES_IRQ(gic_spi(53)), /* IRQ53 */ - DEFINE_RES_IRQ(gic_spi(54)), /* IRQ54 */ - DEFINE_RES_IRQ(gic_spi(55)), /* IRQ55 */ - DEFINE_RES_IRQ(gic_spi(56)), /* IRQ56 */ - DEFINE_RES_IRQ(gic_spi(57)), /* IRQ57 */ -}; - -#define r8a73a4_register_irqc(idx) \ - platform_device_register_resndata(NULL, "renesas_irqc", \ - idx, irqc##idx##_resources, \ - ARRAY_SIZE(irqc##idx##_resources), \ - &irqc##idx##_data, \ - sizeof(struct renesas_irqc_config)) - -/* Thermal0 -> Thermal2 */ -static const struct resource thermal0_resources[] = { - DEFINE_RES_MEM(0xe61f0000, 0x14), - DEFINE_RES_MEM(0xe61f0100, 0x38), - DEFINE_RES_MEM(0xe61f0200, 0x38), - DEFINE_RES_MEM(0xe61f0300, 0x38), - DEFINE_RES_IRQ(gic_spi(69)), -}; - -#define r8a73a4_register_thermal() \ - platform_device_register_simple("rcar_thermal", -1, \ - thermal0_resources, \ - ARRAY_SIZE(thermal0_resources)) - -static struct sh_timer_config cmt1_platform_data = { - .channels_mask = 0xff, -}; - -static struct resource cmt1_resources[] = { - DEFINE_RES_MEM(0xe6130000, 0x1004), - DEFINE_RES_IRQ(gic_spi(120)), -}; - -#define r8a73a4_register_cmt(idx) \ - platform_device_register_resndata(NULL, "sh-cmt-48-gen2", \ - idx, cmt##idx##_resources, \ - ARRAY_SIZE(cmt##idx##_resources), \ - &cmt##idx##_platform_data, \ - sizeof(struct sh_timer_config)) - -/* DMA */ -static const struct sh_dmae_slave_config dma_slaves[] = { - { - .slave_id = SHDMA_SLAVE_MMCIF0_TX, - .addr = 0xee200034, - .chcr = CHCR_TX(XMIT_SZ_32BIT), - .mid_rid = 0xd1, - }, { - .slave_id = SHDMA_SLAVE_MMCIF0_RX, - .addr = 0xee200034, - .chcr = CHCR_RX(XMIT_SZ_32BIT), - .mid_rid = 0xd2, - }, { - .slave_id = SHDMA_SLAVE_MMCIF1_TX, - .addr = 0xee220034, - .chcr = CHCR_TX(XMIT_SZ_32BIT), - .mid_rid = 0xe1, - }, { - .slave_id = SHDMA_SLAVE_MMCIF1_RX, - .addr = 0xee220034, - .chcr = CHCR_RX(XMIT_SZ_32BIT), - .mid_rid = 0xe2, - }, -}; - -#define DMAE_CHANNEL(a, b) \ - { \ - .offset = (a) - 0x20, \ - .dmars = (a) - 0x20 + 0x40, \ - .chclr_bit = (b), \ - .chclr_offset = 0x80 - 0x20, \ - } - -static const struct sh_dmae_channel dma_channels[] = { - DMAE_CHANNEL(0x8000, 0), - DMAE_CHANNEL(0x8080, 1), - DMAE_CHANNEL(0x8100, 2), - DMAE_CHANNEL(0x8180, 3), - DMAE_CHANNEL(0x8200, 4), - DMAE_CHANNEL(0x8280, 5), - DMAE_CHANNEL(0x8300, 6), - DMAE_CHANNEL(0x8380, 7), - DMAE_CHANNEL(0x8400, 8), - DMAE_CHANNEL(0x8480, 9), - DMAE_CHANNEL(0x8500, 10), - DMAE_CHANNEL(0x8580, 11), - DMAE_CHANNEL(0x8600, 12), - DMAE_CHANNEL(0x8680, 13), - DMAE_CHANNEL(0x8700, 14), - DMAE_CHANNEL(0x8780, 15), - DMAE_CHANNEL(0x8800, 16), - DMAE_CHANNEL(0x8880, 17), - DMAE_CHANNEL(0x8900, 18), - DMAE_CHANNEL(0x8980, 19), -}; - -static const struct sh_dmae_pdata dma_pdata = { - .slave = dma_slaves, - .slave_num = ARRAY_SIZE(dma_slaves), - .channel = dma_channels, - .channel_num = ARRAY_SIZE(dma_channels), - .ts_low_shift = TS_LOW_SHIFT, - .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT, - .ts_high_shift = TS_HI_SHIFT, - .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT, - .ts_shift = dma_ts_shift, - .ts_shift_num = ARRAY_SIZE(dma_ts_shift), - .dmaor_init = DMAOR_DME, - .chclr_present = 1, - .chclr_bitwise = 1, -}; - -static struct resource dma_resources[] = { - DEFINE_RES_MEM(0xe6700020, 0x89e0), - DEFINE_RES_IRQ(gic_spi(220)), - { - /* IRQ for channels 0-19 */ - .start = gic_spi(200), - .end = gic_spi(219), - .flags = IORESOURCE_IRQ, - }, -}; - -#define r8a73a4_register_dmac() \ - platform_device_register_resndata(NULL, "sh-dma-engine", 0, \ - dma_resources, ARRAY_SIZE(dma_resources), \ - &dma_pdata, sizeof(dma_pdata)) - -void __init r8a73a4_add_standard_devices(void) -{ - r8a73a4_register_cmt(1); - r8a73a4_register_scif(0); - r8a73a4_register_scif(1); - r8a73a4_register_scif(2); - r8a73a4_register_scif(3); - r8a73a4_register_scif(4); - r8a73a4_register_scif(5); - r8a73a4_register_irqc(0); - r8a73a4_register_irqc(1); - r8a73a4_register_thermal(); - r8a73a4_register_dmac(); -} - -#ifdef CONFIG_USE_OF static const char *r8a73a4_boards_compat_dt[] __initdata = { "renesas,r8a73a4", @@ -298,4 +30,3 @@ DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)") .init_late = shmobile_init_late, .dt_compat = r8a73a4_boards_compat_dt, MACHINE_END -#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index dd64caf79216..9832e48396a4 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -842,13 +842,6 @@ static void __init r8a7740_generic_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -#define RESCNT2 IOMEM(0xe6188020) -static void r8a7740_restart(enum reboot_mode mode, const char *cmd) -{ - /* Do soft power on reset */ - writel(1 << 31, RESCNT2); -} - static const char *r8a7740_boards_compat_dt[] __initdata = { "renesas,r8a7740", NULL, @@ -861,7 +854,6 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") .init_machine = r8a7740_generic_init, .init_late = shmobile_init_late, .dt_compat = r8a7740_boards_compat_dt, - .restart = r8a7740_restart, MACHINE_END #endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index cef8895a9b82..c49aa094fe17 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -15,6 +15,7 @@ * GNU General Public License for more details. */ +#include <linux/clk/shmobile.h> #include <linux/kernel.h> #include <linux/io.h> #include <linux/irqchip/arm-gic.h> @@ -41,6 +42,21 @@ #include "irqs.h" #include "r8a7778.h" +#define MODEMR 0xffcc0020 + +#ifdef CONFIG_COMMON_CLK +static void __init r8a7778_timer_init(void) +{ + u32 mode; + void __iomem *modemr = ioremap_nocache(MODEMR, 4); + + BUG_ON(!modemr); + mode = ioread32(modemr); + iounmap(modemr); + r8a7778_clocks_init(mode); +} +#endif + /* SCIF */ #define R8A7778_SCIF(index, baseaddr, irq) \ static struct plat_sci_port scif##index##_platform_data = { \ @@ -608,6 +624,9 @@ DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)") .init_early = shmobile_init_delay, .init_irq = r8a7778_init_irq_dt, .init_late = shmobile_init_late, +#ifdef CONFIG_COMMON_CLK + .init_time = r8a7778_timer_init, +#endif .dt_compat = r8a7778_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 27dceaf9e688..c03e562be12b 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -713,18 +713,13 @@ void __init r8a7779_init_late(void) } #ifdef CONFIG_USE_OF -static int r8a7779_set_wake(struct irq_data *data, unsigned int on) -{ - return 0; /* always allow wakeup */ -} - void __init r8a7779_init_irq_dt(void) { #ifdef CONFIG_ARCH_SHMOBILE_LEGACY void __iomem *gic_dist_base = ioremap_nocache(0xf0001000, 0x1000); void __iomem *gic_cpu_base = ioremap_nocache(0xf0000100, 0x1000); #endif - gic_arch_extn.irq_set_wake = r8a7779_set_wake; + gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE); #ifdef CONFIG_ARCH_SHMOBILE_LEGACY gic_init(0, 29, gic_dist_base, gic_cpu_base); diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index d1fa625e61f5..5d13595aa027 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -21,6 +21,7 @@ #include <linux/dma-contiguous.h> #include <linux/io.h> #include <linux/kernel.h> +#include <linux/memblock.h> #include <linux/of.h> #include <linux/of_fdt.h> #include <asm/mach/arch.h> @@ -50,9 +51,7 @@ u32 rcar_gen2_read_mode_pins(void) void __init rcar_gen2_timer_init(void) { -#if defined(CONFIG_ARM_ARCH_TIMER) || defined(CONFIG_COMMON_CLK) u32 mode = rcar_gen2_read_mode_pins(); -#endif #ifdef CONFIG_ARM_ARCH_TIMER void __iomem *base; int extal_mhz = 0; @@ -128,9 +127,7 @@ void __init rcar_gen2_timer_init(void) iounmap(base); #endif /* CONFIG_ARM_ARCH_TIMER */ -#ifdef CONFIG_COMMON_CLK rcar_gen2_clocks_init(mode); -#endif #ifdef CONFIG_ARCH_SHMOBILE_MULTI clocksource_of_init(); #endif @@ -199,7 +196,7 @@ void __init rcar_gen2_reserve(void) of_scan_flat_dt(rcar_gen2_scan_mem, &mrc); #ifdef CONFIG_DMA_CMA - if (mrc.size) + if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size)) dma_contiguous_reserve_area(mrc.size, mrc.base, 0, &rcar_gen2_dma_contiguous, true); #endif diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c deleted file mode 100644 index 458a2cfad417..000000000000 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ /dev/null @@ -1,1016 +0,0 @@ -/* - * sh7372 processor support - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/of_platform.h> -#include <linux/uio_driver.h> -#include <linux/delay.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/serial_sci.h> -#include <linux/sh_dma.h> -#include <linux/sh_timer.h> -#include <linux/pm_domain.h> -#include <linux/dma-mapping.h> -#include <linux/platform_data/sh_ipmmu.h> - -#include <asm/mach/map.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "dma-register.h" -#include "intc.h" -#include "irqs.h" -#include "pm-rmobile.h" -#include "sh7372.h" - -static struct map_desc sh7372_io_desc[] __initdata = { - /* create a 1:1 identity mapping for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -void __init sh7372_map_io(void) -{ - debug_ll_io_init(); - iotable_init(sh7372_io_desc, ARRAY_SIZE(sh7372_io_desc)); -} - -/* PFC */ -static struct resource sh7372_pfc_resources[] = { - [0] = { - .start = 0xe6050000, - .end = 0xe6057fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0xe605800c, - .end = 0xe6058027, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device sh7372_pfc_device = { - .name = "pfc-sh7372", - .id = -1, - .resource = sh7372_pfc_resources, - .num_resources = ARRAY_SIZE(sh7372_pfc_resources), -}; - -void __init sh7372_pinmux_init(void) -{ - platform_device_register(&sh7372_pfc_device); -} - -/* SCIF */ -#define SH7372_SCIF(scif_type, index, baseaddr, irq) \ -static struct plat_sci_port scif##index##_platform_data = { \ - .type = scif_type, \ - .flags = UPF_BOOT_AUTOCONF, \ - .scscr = SCSCR_RE | SCSCR_TE, \ -}; \ - \ -static struct resource scif##index##_resources[] = { \ - DEFINE_RES_MEM(baseaddr, 0x100), \ - DEFINE_RES_IRQ(irq), \ -}; \ - \ -static struct platform_device scif##index##_device = { \ - .name = "sh-sci", \ - .id = index, \ - .resource = scif##index##_resources, \ - .num_resources = ARRAY_SIZE(scif##index##_resources), \ - .dev = { \ - .platform_data = &scif##index##_platform_data, \ - }, \ -} - -SH7372_SCIF(PORT_SCIFA, 0, 0xe6c40000, evt2irq(0x0c00)); -SH7372_SCIF(PORT_SCIFA, 1, 0xe6c50000, evt2irq(0x0c20)); -SH7372_SCIF(PORT_SCIFA, 2, 0xe6c60000, evt2irq(0x0c40)); -SH7372_SCIF(PORT_SCIFA, 3, 0xe6c70000, evt2irq(0x0c60)); -SH7372_SCIF(PORT_SCIFA, 4, 0xe6c80000, evt2irq(0x0d20)); -SH7372_SCIF(PORT_SCIFA, 5, 0xe6cb0000, evt2irq(0x0d40)); -SH7372_SCIF(PORT_SCIFB, 6, 0xe6c30000, evt2irq(0x0d60)); - -/* CMT */ -static struct sh_timer_config cmt2_platform_data = { - .channels_mask = 0x20, -}; - -static struct resource cmt2_resources[] = { - DEFINE_RES_MEM(0xe6130000, 0x50), - DEFINE_RES_IRQ(evt2irq(0x0b80)), -}; - -static struct platform_device cmt2_device = { - .name = "sh-cmt-32-fast", - .id = 2, - .dev = { - .platform_data = &cmt2_platform_data, - }, - .resource = cmt2_resources, - .num_resources = ARRAY_SIZE(cmt2_resources), -}; - -/* TMU */ -static struct sh_timer_config tmu0_platform_data = { - .channels_mask = 7, -}; - -static struct resource tmu0_resources[] = { - DEFINE_RES_MEM(0xfff60000, 0x2c), - DEFINE_RES_IRQ(intcs_evt2irq(0xe80)), - DEFINE_RES_IRQ(intcs_evt2irq(0xea0)), - DEFINE_RES_IRQ(intcs_evt2irq(0xec0)), -}; - -static struct platform_device tmu0_device = { - .name = "sh-tmu", - .id = 0, - .dev = { - .platform_data = &tmu0_platform_data, - }, - .resource = tmu0_resources, - .num_resources = ARRAY_SIZE(tmu0_resources), -}; - -/* I2C */ -static struct resource iic0_resources[] = { - [0] = { - .name = "IIC0", - .start = 0xFFF20000, - .end = 0xFFF20425 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0xe00), /* IIC0_ALI0 */ - .end = intcs_evt2irq(0xe60), /* IIC0_DTEI0 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device iic0_device = { - .name = "i2c-sh_mobile", - .id = 0, /* "i2c0" clock */ - .num_resources = ARRAY_SIZE(iic0_resources), - .resource = iic0_resources, -}; - -static struct resource iic1_resources[] = { - [0] = { - .name = "IIC1", - .start = 0xE6C20000, - .end = 0xE6C20425 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x780), /* IIC1_ALI1 */ - .end = evt2irq(0x7e0), /* IIC1_DTEI1 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device iic1_device = { - .name = "i2c-sh_mobile", - .id = 1, /* "i2c1" clock */ - .num_resources = ARRAY_SIZE(iic1_resources), - .resource = iic1_resources, -}; - -/* DMA */ -static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = { - { - .slave_id = SHDMA_SLAVE_SCIF0_TX, - .addr = 0xe6c40020, - .chcr = CHCR_TX(XMIT_SZ_8BIT), - .mid_rid = 0x21, - }, { - .slave_id = SHDMA_SLAVE_SCIF0_RX, - .addr = 0xe6c40024, - .chcr = CHCR_RX(XMIT_SZ_8BIT), - .mid_rid = 0x22, - }, { - .slave_id = SHDMA_SLAVE_SCIF1_TX, - .addr = 0xe6c50020, - .chcr = CHCR_TX(XMIT_SZ_8BIT), - .mid_rid = 0x25, - }, { - .slave_id = SHDMA_SLAVE_SCIF1_RX, - .addr = 0xe6c50024, - .chcr = CHCR_RX(XMIT_SZ_8BIT), - .mid_rid = 0x26, - }, { - .slave_id = SHDMA_SLAVE_SCIF2_TX, - .addr = 0xe6c60020, - .chcr = CHCR_TX(XMIT_SZ_8BIT), - .mid_rid = 0x29, - }, { - .slave_id = SHDMA_SLAVE_SCIF2_RX, - .addr = 0xe6c60024, - .chcr = CHCR_RX(XMIT_SZ_8BIT), - .mid_rid = 0x2a, - }, { - .slave_id = SHDMA_SLAVE_SCIF3_TX, - .addr = 0xe6c70020, - .chcr = CHCR_TX(XMIT_SZ_8BIT), - .mid_rid = 0x2d, - }, { - .slave_id = SHDMA_SLAVE_SCIF3_RX, - .addr = 0xe6c70024, - .chcr = CHCR_RX(XMIT_SZ_8BIT), - .mid_rid = 0x2e, - }, { - .slave_id = SHDMA_SLAVE_SCIF4_TX, - .addr = 0xe6c80020, - .chcr = CHCR_TX(XMIT_SZ_8BIT), - .mid_rid = 0x39, - }, { - .slave_id = SHDMA_SLAVE_SCIF4_RX, - .addr = 0xe6c80024, - .chcr = CHCR_RX(XMIT_SZ_8BIT), - .mid_rid = 0x3a, - }, { - .slave_id = SHDMA_SLAVE_SCIF5_TX, - .addr = 0xe6cb0020, - .chcr = CHCR_TX(XMIT_SZ_8BIT), - .mid_rid = 0x35, - }, { - .slave_id = SHDMA_SLAVE_SCIF5_RX, - .addr = 0xe6cb0024, - .chcr = CHCR_RX(XMIT_SZ_8BIT), - .mid_rid = 0x36, - }, { - .slave_id = SHDMA_SLAVE_SCIF6_TX, - .addr = 0xe6c30040, - .chcr = CHCR_TX(XMIT_SZ_8BIT), - .mid_rid = 0x3d, - }, { - .slave_id = SHDMA_SLAVE_SCIF6_RX, - .addr = 0xe6c30060, - .chcr = CHCR_RX(XMIT_SZ_8BIT), - .mid_rid = 0x3e, - }, { - .slave_id = SHDMA_SLAVE_FLCTL0_TX, - .addr = 0xe6a30050, - .chcr = CHCR_TX(XMIT_SZ_32BIT), - .mid_rid = 0x83, - }, { - .slave_id = SHDMA_SLAVE_FLCTL0_RX, - .addr = 0xe6a30050, - .chcr = CHCR_RX(XMIT_SZ_32BIT), - .mid_rid = 0x83, - }, { - .slave_id = SHDMA_SLAVE_FLCTL1_TX, - .addr = 0xe6a30060, - .chcr = CHCR_TX(XMIT_SZ_32BIT), - .mid_rid = 0x87, - }, { - .slave_id = SHDMA_SLAVE_FLCTL1_RX, - .addr = 0xe6a30060, - .chcr = CHCR_RX(XMIT_SZ_32BIT), - .mid_rid = 0x87, - }, { - .slave_id = SHDMA_SLAVE_SDHI0_TX, - .addr = 0xe6850030, - .chcr = CHCR_TX(XMIT_SZ_16BIT), - .mid_rid = 0xc1, - }, { - .slave_id = SHDMA_SLAVE_SDHI0_RX, - .addr = 0xe6850030, - .chcr = CHCR_RX(XMIT_SZ_16BIT), - .mid_rid = 0xc2, - }, { - .slave_id = SHDMA_SLAVE_SDHI1_TX, - .addr = 0xe6860030, - .chcr = CHCR_TX(XMIT_SZ_16BIT), - .mid_rid = 0xc9, - }, { - .slave_id = SHDMA_SLAVE_SDHI1_RX, - .addr = 0xe6860030, - .chcr = CHCR_RX(XMIT_SZ_16BIT), - .mid_rid = 0xca, - }, { - .slave_id = SHDMA_SLAVE_SDHI2_TX, - .addr = 0xe6870030, - .chcr = CHCR_TX(XMIT_SZ_16BIT), - .mid_rid = 0xcd, - }, { - .slave_id = SHDMA_SLAVE_SDHI2_RX, - .addr = 0xe6870030, - .chcr = CHCR_RX(XMIT_SZ_16BIT), - .mid_rid = 0xce, - }, { - .slave_id = SHDMA_SLAVE_FSIA_TX, - .addr = 0xfe1f0024, - .chcr = CHCR_TX(XMIT_SZ_32BIT), - .mid_rid = 0xb1, - }, { - .slave_id = SHDMA_SLAVE_FSIA_RX, - .addr = 0xfe1f0020, - .chcr = CHCR_RX(XMIT_SZ_32BIT), - .mid_rid = 0xb2, - }, { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - .addr = 0xe6bd0034, - .chcr = CHCR_TX(XMIT_SZ_32BIT), - .mid_rid = 0xd1, - }, { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - .addr = 0xe6bd0034, - .chcr = CHCR_RX(XMIT_SZ_32BIT), - .mid_rid = 0xd2, - }, -}; - -#define SH7372_CHCLR (0x220 - 0x20) - -static const struct sh_dmae_channel sh7372_dmae_channels[] = { - { - .offset = 0, - .dmars = 0, - .dmars_bit = 0, - .chclr_offset = SH7372_CHCLR + 0, - }, { - .offset = 0x10, - .dmars = 0, - .dmars_bit = 8, - .chclr_offset = SH7372_CHCLR + 0x10, - }, { - .offset = 0x20, - .dmars = 4, - .dmars_bit = 0, - .chclr_offset = SH7372_CHCLR + 0x20, - }, { - .offset = 0x30, - .dmars = 4, - .dmars_bit = 8, - .chclr_offset = SH7372_CHCLR + 0x30, - }, { - .offset = 0x50, - .dmars = 8, - .dmars_bit = 0, - .chclr_offset = SH7372_CHCLR + 0x50, - }, { - .offset = 0x60, - .dmars = 8, - .dmars_bit = 8, - .chclr_offset = SH7372_CHCLR + 0x60, - } -}; - -static struct sh_dmae_pdata dma_platform_data = { - .slave = sh7372_dmae_slaves, - .slave_num = ARRAY_SIZE(sh7372_dmae_slaves), - .channel = sh7372_dmae_channels, - .channel_num = ARRAY_SIZE(sh7372_dmae_channels), - .ts_low_shift = TS_LOW_SHIFT, - .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT, - .ts_high_shift = TS_HI_SHIFT, - .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT, - .ts_shift = dma_ts_shift, - .ts_shift_num = ARRAY_SIZE(dma_ts_shift), - .dmaor_init = DMAOR_DME, - .chclr_present = 1, -}; - -/* Resource order important! */ -static struct resource sh7372_dmae0_resources[] = { - { - /* Channel registers and DMAOR */ - .start = 0xfe008020, - .end = 0xfe00828f, - .flags = IORESOURCE_MEM, - }, - { - /* DMARSx */ - .start = 0xfe009000, - .end = 0xfe00900b, - .flags = IORESOURCE_MEM, - }, - { - .name = "error_irq", - .start = evt2irq(0x20c0), - .end = evt2irq(0x20c0), - .flags = IORESOURCE_IRQ, - }, - { - /* IRQ for channels 0-5 */ - .start = evt2irq(0x2000), - .end = evt2irq(0x20a0), - .flags = IORESOURCE_IRQ, - }, -}; - -/* Resource order important! */ -static struct resource sh7372_dmae1_resources[] = { - { - /* Channel registers and DMAOR */ - .start = 0xfe018020, - .end = 0xfe01828f, - .flags = IORESOURCE_MEM, - }, - { - /* DMARSx */ - .start = 0xfe019000, - .end = 0xfe01900b, - .flags = IORESOURCE_MEM, - }, - { - .name = "error_irq", - .start = evt2irq(0x21c0), - .end = evt2irq(0x21c0), - .flags = IORESOURCE_IRQ, - }, - { - /* IRQ for channels 0-5 */ - .start = evt2irq(0x2100), - .end = evt2irq(0x21a0), - .flags = IORESOURCE_IRQ, - }, -}; - -/* Resource order important! */ -static struct resource sh7372_dmae2_resources[] = { - { - /* Channel registers and DMAOR */ - .start = 0xfe028020, - .end = 0xfe02828f, - .flags = IORESOURCE_MEM, - }, - { - /* DMARSx */ - .start = 0xfe029000, - .end = 0xfe02900b, - .flags = IORESOURCE_MEM, - }, - { - .name = "error_irq", - .start = evt2irq(0x22c0), - .end = evt2irq(0x22c0), - .flags = IORESOURCE_IRQ, - }, - { - /* IRQ for channels 0-5 */ - .start = evt2irq(0x2200), - .end = evt2irq(0x22a0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dma0_device = { - .name = "sh-dma-engine", - .id = 0, - .resource = sh7372_dmae0_resources, - .num_resources = ARRAY_SIZE(sh7372_dmae0_resources), - .dev = { - .platform_data = &dma_platform_data, - }, -}; - -static struct platform_device dma1_device = { - .name = "sh-dma-engine", - .id = 1, - .resource = sh7372_dmae1_resources, - .num_resources = ARRAY_SIZE(sh7372_dmae1_resources), - .dev = { - .platform_data = &dma_platform_data, - }, -}; - -static struct platform_device dma2_device = { - .name = "sh-dma-engine", - .id = 2, - .resource = sh7372_dmae2_resources, - .num_resources = ARRAY_SIZE(sh7372_dmae2_resources), - .dev = { - .platform_data = &dma_platform_data, - }, -}; - -/* - * USB-DMAC - */ -static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = { - { - .offset = 0, - }, { - .offset = 0x20, - }, -}; - -/* USB DMAC0 */ -static const struct sh_dmae_slave_config sh7372_usb_dmae0_slaves[] = { - { - .slave_id = SHDMA_SLAVE_USB0_TX, - .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE), - }, { - .slave_id = SHDMA_SLAVE_USB0_RX, - .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE), - }, -}; - -static struct sh_dmae_pdata usb_dma0_platform_data = { - .slave = sh7372_usb_dmae0_slaves, - .slave_num = ARRAY_SIZE(sh7372_usb_dmae0_slaves), - .channel = sh7372_usb_dmae_channels, - .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), - .ts_low_shift = USBTS_LOW_SHIFT, - .ts_low_mask = USBTS_LOW_BIT << USBTS_LOW_SHIFT, - .ts_high_shift = USBTS_HI_SHIFT, - .ts_high_mask = USBTS_HI_BIT << USBTS_HI_SHIFT, - .ts_shift = dma_usbts_shift, - .ts_shift_num = ARRAY_SIZE(dma_usbts_shift), - .dmaor_init = DMAOR_DME, - .chcr_offset = 0x14, - .chcr_ie_bit = 1 << 5, - .dmaor_is_32bit = 1, - .needs_tend_set = 1, - .no_dmars = 1, - .slave_only = 1, -}; - -static struct resource sh7372_usb_dmae0_resources[] = { - { - /* Channel registers and DMAOR */ - .start = 0xe68a0020, - .end = 0xe68a0064 - 1, - .flags = IORESOURCE_MEM, - }, - { - /* VCR/SWR/DMICR */ - .start = 0xe68a0000, - .end = 0xe68a0014 - 1, - .flags = IORESOURCE_MEM, - }, - { - /* IRQ for channels */ - .start = evt2irq(0x0a00), - .end = evt2irq(0x0a00), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb_dma0_device = { - .name = "sh-dma-engine", - .id = 3, - .resource = sh7372_usb_dmae0_resources, - .num_resources = ARRAY_SIZE(sh7372_usb_dmae0_resources), - .dev = { - .platform_data = &usb_dma0_platform_data, - }, -}; - -/* USB DMAC1 */ -static const struct sh_dmae_slave_config sh7372_usb_dmae1_slaves[] = { - { - .slave_id = SHDMA_SLAVE_USB1_TX, - .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE), - }, { - .slave_id = SHDMA_SLAVE_USB1_RX, - .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE), - }, -}; - -static struct sh_dmae_pdata usb_dma1_platform_data = { - .slave = sh7372_usb_dmae1_slaves, - .slave_num = ARRAY_SIZE(sh7372_usb_dmae1_slaves), - .channel = sh7372_usb_dmae_channels, - .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), - .ts_low_shift = USBTS_LOW_SHIFT, - .ts_low_mask = USBTS_LOW_BIT << USBTS_LOW_SHIFT, - .ts_high_shift = USBTS_HI_SHIFT, - .ts_high_mask = USBTS_HI_BIT << USBTS_HI_SHIFT, - .ts_shift = dma_usbts_shift, - .ts_shift_num = ARRAY_SIZE(dma_usbts_shift), - .dmaor_init = DMAOR_DME, - .chcr_offset = 0x14, - .chcr_ie_bit = 1 << 5, - .dmaor_is_32bit = 1, - .needs_tend_set = 1, - .no_dmars = 1, - .slave_only = 1, -}; - -static struct resource sh7372_usb_dmae1_resources[] = { - { - /* Channel registers and DMAOR */ - .start = 0xe68c0020, - .end = 0xe68c0064 - 1, - .flags = IORESOURCE_MEM, - }, - { - /* VCR/SWR/DMICR */ - .start = 0xe68c0000, - .end = 0xe68c0014 - 1, - .flags = IORESOURCE_MEM, - }, - { - /* IRQ for channels */ - .start = evt2irq(0x1d00), - .end = evt2irq(0x1d00), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb_dma1_device = { - .name = "sh-dma-engine", - .id = 4, - .resource = sh7372_usb_dmae1_resources, - .num_resources = ARRAY_SIZE(sh7372_usb_dmae1_resources), - .dev = { - .platform_data = &usb_dma1_platform_data, - }, -}; - -/* VPU */ -static struct uio_info vpu_platform_data = { - .name = "VPU5HG", - .version = "0", - .irq = intcs_evt2irq(0x980), -}; - -static struct resource vpu_resources[] = { - [0] = { - .name = "VPU", - .start = 0xfe900000, - .end = 0xfe900157, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device vpu_device = { - .name = "uio_pdrv_genirq", - .id = 0, - .dev = { - .platform_data = &vpu_platform_data, - }, - .resource = vpu_resources, - .num_resources = ARRAY_SIZE(vpu_resources), -}; - -/* VEU0 */ -static struct uio_info veu0_platform_data = { - .name = "VEU0", - .version = "0", - .irq = intcs_evt2irq(0x700), -}; - -static struct resource veu0_resources[] = { - [0] = { - .name = "VEU0", - .start = 0xfe920000, - .end = 0xfe9200cb, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu0_device = { - .name = "uio_pdrv_genirq", - .id = 1, - .dev = { - .platform_data = &veu0_platform_data, - }, - .resource = veu0_resources, - .num_resources = ARRAY_SIZE(veu0_resources), -}; - -/* VEU1 */ -static struct uio_info veu1_platform_data = { - .name = "VEU1", - .version = "0", - .irq = intcs_evt2irq(0x720), -}; - -static struct resource veu1_resources[] = { - [0] = { - .name = "VEU1", - .start = 0xfe924000, - .end = 0xfe9240cb, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu1_device = { - .name = "uio_pdrv_genirq", - .id = 2, - .dev = { - .platform_data = &veu1_platform_data, - }, - .resource = veu1_resources, - .num_resources = ARRAY_SIZE(veu1_resources), -}; - -/* VEU2 */ -static struct uio_info veu2_platform_data = { - .name = "VEU2", - .version = "0", - .irq = intcs_evt2irq(0x740), -}; - -static struct resource veu2_resources[] = { - [0] = { - .name = "VEU2", - .start = 0xfe928000, - .end = 0xfe928307, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu2_device = { - .name = "uio_pdrv_genirq", - .id = 3, - .dev = { - .platform_data = &veu2_platform_data, - }, - .resource = veu2_resources, - .num_resources = ARRAY_SIZE(veu2_resources), -}; - -/* VEU3 */ -static struct uio_info veu3_platform_data = { - .name = "VEU3", - .version = "0", - .irq = intcs_evt2irq(0x760), -}; - -static struct resource veu3_resources[] = { - [0] = { - .name = "VEU3", - .start = 0xfe92c000, - .end = 0xfe92c307, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu3_device = { - .name = "uio_pdrv_genirq", - .id = 4, - .dev = { - .platform_data = &veu3_platform_data, - }, - .resource = veu3_resources, - .num_resources = ARRAY_SIZE(veu3_resources), -}; - -/* JPU */ -static struct uio_info jpu_platform_data = { - .name = "JPU", - .version = "0", - .irq = intcs_evt2irq(0x560), -}; - -static struct resource jpu_resources[] = { - [0] = { - .name = "JPU", - .start = 0xfe980000, - .end = 0xfe9902d3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device jpu_device = { - .name = "uio_pdrv_genirq", - .id = 5, - .dev = { - .platform_data = &jpu_platform_data, - }, - .resource = jpu_resources, - .num_resources = ARRAY_SIZE(jpu_resources), -}; - -/* SPU2DSP0 */ -static struct uio_info spu0_platform_data = { - .name = "SPU2DSP0", - .version = "0", - .irq = evt2irq(0x1800), -}; - -static struct resource spu0_resources[] = { - [0] = { - .name = "SPU2DSP0", - .start = 0xfe200000, - .end = 0xfe2fffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device spu0_device = { - .name = "uio_pdrv_genirq", - .id = 6, - .dev = { - .platform_data = &spu0_platform_data, - }, - .resource = spu0_resources, - .num_resources = ARRAY_SIZE(spu0_resources), -}; - -/* SPU2DSP1 */ -static struct uio_info spu1_platform_data = { - .name = "SPU2DSP1", - .version = "0", - .irq = evt2irq(0x1820), -}; - -static struct resource spu1_resources[] = { - [0] = { - .name = "SPU2DSP1", - .start = 0xfe300000, - .end = 0xfe3fffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device spu1_device = { - .name = "uio_pdrv_genirq", - .id = 7, - .dev = { - .platform_data = &spu1_platform_data, - }, - .resource = spu1_resources, - .num_resources = ARRAY_SIZE(spu1_resources), -}; - -/* IPMMUI (an IPMMU module for ICB/LMB) */ -static struct resource ipmmu_resources[] = { - [0] = { - .name = "IPMMUI", - .start = 0xfe951000, - .end = 0xfe9510ff, - .flags = IORESOURCE_MEM, - }, -}; - -static const char * const ipmmu_dev_names[] = { - "sh_mobile_lcdc_fb.0", - "sh_mobile_lcdc_fb.1", - "sh_mobile_ceu.0", - "uio_pdrv_genirq.0", - "uio_pdrv_genirq.1", - "uio_pdrv_genirq.2", - "uio_pdrv_genirq.3", - "uio_pdrv_genirq.4", - "uio_pdrv_genirq.5", -}; - -static struct shmobile_ipmmu_platform_data ipmmu_platform_data = { - .dev_names = ipmmu_dev_names, - .num_dev_names = ARRAY_SIZE(ipmmu_dev_names), -}; - -static struct platform_device ipmmu_device = { - .name = "ipmmu", - .id = -1, - .dev = { - .platform_data = &ipmmu_platform_data, - }, - .resource = ipmmu_resources, - .num_resources = ARRAY_SIZE(ipmmu_resources), -}; - -static struct platform_device *sh7372_early_devices[] __initdata = { - &scif0_device, - &scif1_device, - &scif2_device, - &scif3_device, - &scif4_device, - &scif5_device, - &scif6_device, - &cmt2_device, - &tmu0_device, - &ipmmu_device, -}; - -static struct platform_device *sh7372_late_devices[] __initdata = { - &iic0_device, - &iic1_device, - &dma0_device, - &dma1_device, - &dma2_device, - &usb_dma0_device, - &usb_dma1_device, - &vpu_device, - &veu0_device, - &veu1_device, - &veu2_device, - &veu3_device, - &jpu_device, - &spu0_device, - &spu1_device, -}; - -void __init sh7372_add_standard_devices(void) -{ - static struct pm_domain_device domain_devices[] __initdata = { - { "A3RV", &vpu_device, }, - { "A4MP", &spu0_device, }, - { "A4MP", &spu1_device, }, - { "A3SP", &scif0_device, }, - { "A3SP", &scif1_device, }, - { "A3SP", &scif2_device, }, - { "A3SP", &scif3_device, }, - { "A3SP", &scif4_device, }, - { "A3SP", &scif5_device, }, - { "A3SP", &scif6_device, }, - { "A3SP", &iic1_device, }, - { "A3SP", &dma0_device, }, - { "A3SP", &dma1_device, }, - { "A3SP", &dma2_device, }, - { "A3SP", &usb_dma0_device, }, - { "A3SP", &usb_dma1_device, }, - { "A4R", &iic0_device, }, - { "A4R", &veu0_device, }, - { "A4R", &veu1_device, }, - { "A4R", &veu2_device, }, - { "A4R", &veu3_device, }, - { "A4R", &jpu_device, }, - { "A4R", &tmu0_device, }, - }; - - sh7372_init_pm_domains(); - - platform_add_devices(sh7372_early_devices, - ARRAY_SIZE(sh7372_early_devices)); - - platform_add_devices(sh7372_late_devices, - ARRAY_SIZE(sh7372_late_devices)); - - rmobile_add_devices_to_domains(domain_devices, - ARRAY_SIZE(domain_devices)); -} - -void __init sh7372_earlytimer_init(void) -{ - sh7372_clock_init(); - shmobile_earlytimer_init(); -} - -void __init sh7372_add_early_devices(void) -{ - early_platform_add_devices(sh7372_early_devices, - ARRAY_SIZE(sh7372_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); -} - -#ifdef CONFIG_USE_OF - -void __init sh7372_add_early_devices_dt(void) -{ - shmobile_init_delay(); - - sh7372_add_early_devices(); -} - -void __init sh7372_add_standard_devices_dt(void) -{ - /* clocks are setup late during boot in the case of DT */ - sh7372_clock_init(); - - platform_add_devices(sh7372_early_devices, - ARRAY_SIZE(sh7372_early_devices)); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char *sh7372_boards_compat_dt[] __initdata = { - "renesas,sh7372", - NULL, -}; - -DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)") - .map_io = sh7372_map_io, - .init_early = sh7372_add_early_devices_dt, - .init_irq = sh7372_init_irq, - .handle_irq = shmobile_handle_irq_intc, - .init_machine = sh7372_add_standard_devices_dt, - .init_late = shmobile_init_late, - .dt_compat = sh7372_boards_compat_dt, -MACHINE_END - -#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index faea74a2151b..fb2ab7590af8 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -30,6 +30,7 @@ #include <linux/platform_data/sh_ipmmu.h> #include <linux/platform_data/irq-renesas-intc-irqpin.h> +#include <asm/hardware/cache-l2x0.h> #include <asm/mach-types.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> @@ -784,22 +785,15 @@ void __init sh73a0_add_early_devices(void) #ifdef CONFIG_USE_OF -void __init sh73a0_add_standard_devices_dt(void) +static void __init sh73a0_generic_init(void) { - /* clocks are setup late during boot in the case of DT */ -#ifndef CONFIG_COMMON_CLK - sh73a0_clock_init(); +#ifdef CONFIG_CACHE_L2X0 + /* Shared attribute override enable, 64K*8way */ + l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff); #endif of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -#define RESCNT2 IOMEM(0xe6188020) -static void sh73a0_restart(enum reboot_mode mode, const char *cmd) -{ - /* Do soft power on reset */ - writel((1 << 31), RESCNT2); -} - static const char *sh73a0_boards_compat_dt[] __initdata = { "renesas,sh73a0", NULL, @@ -809,9 +803,8 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)") .smp = smp_ops(sh73a0_smp_ops), .map_io = sh73a0_map_io, .init_early = shmobile_init_delay, - .init_machine = sh73a0_add_standard_devices_dt, + .init_machine = sh73a0_generic_init, .init_late = shmobile_init_late, - .restart = sh73a0_restart, .dt_compat = sh73a0_boards_compat_dt, MACHINE_END #endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/sh7372.h b/arch/arm/mach-shmobile/sh7372.h deleted file mode 100644 index 4ad960d5075b..000000000000 --- a/arch/arm/mach-shmobile/sh7372.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * Copyright (C) 2010 Renesas Solutions Corp. - * - * Kuninori Morimoto <morimoto.kuninori@renesas.com> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef __ASM_SH7372_H__ -#define __ASM_SH7372_H__ - -/* DMA slave IDs */ -enum { - SHDMA_SLAVE_INVALID, - SHDMA_SLAVE_SCIF0_TX, - SHDMA_SLAVE_SCIF0_RX, - SHDMA_SLAVE_SCIF1_TX, - SHDMA_SLAVE_SCIF1_RX, - SHDMA_SLAVE_SCIF2_TX, - SHDMA_SLAVE_SCIF2_RX, - SHDMA_SLAVE_SCIF3_TX, - SHDMA_SLAVE_SCIF3_RX, - SHDMA_SLAVE_SCIF4_TX, - SHDMA_SLAVE_SCIF4_RX, - SHDMA_SLAVE_SCIF5_TX, - SHDMA_SLAVE_SCIF5_RX, - SHDMA_SLAVE_SCIF6_TX, - SHDMA_SLAVE_SCIF6_RX, - SHDMA_SLAVE_FLCTL0_TX, - SHDMA_SLAVE_FLCTL0_RX, - SHDMA_SLAVE_FLCTL1_TX, - SHDMA_SLAVE_FLCTL1_RX, - SHDMA_SLAVE_SDHI0_RX, - SHDMA_SLAVE_SDHI0_TX, - SHDMA_SLAVE_SDHI1_RX, - SHDMA_SLAVE_SDHI1_TX, - SHDMA_SLAVE_SDHI2_RX, - SHDMA_SLAVE_SDHI2_TX, - SHDMA_SLAVE_FSIA_RX, - SHDMA_SLAVE_FSIA_TX, - SHDMA_SLAVE_MMCIF_RX, - SHDMA_SLAVE_MMCIF_TX, - SHDMA_SLAVE_USB0_TX, - SHDMA_SLAVE_USB0_RX, - SHDMA_SLAVE_USB1_TX, - SHDMA_SLAVE_USB1_RX, -}; - -extern struct clk sh7372_extal1_clk; -extern struct clk sh7372_extal2_clk; -extern struct clk sh7372_dv_clki_clk; -extern struct clk sh7372_dv_clki_div2_clk; -extern struct clk sh7372_pllc2_clk; - -extern void sh7372_init_irq(void); -extern void sh7372_map_io(void); -extern void sh7372_earlytimer_init(void); -extern void sh7372_add_early_devices(void); -extern void sh7372_add_standard_devices(void); -extern void sh7372_add_early_devices_dt(void); -extern void sh7372_add_standard_devices_dt(void); -extern void sh7372_clock_init(void); -extern void sh7372_pinmux_init(void); -extern void sh7372_pm_init(void); -extern void sh7372_resume_core_standby_sysc(void); -extern int sh7372_do_idle_sysc(unsigned long sleep_mode); -extern void sh7372_intcs_suspend(void); -extern void sh7372_intcs_resume(void); -extern void sh7372_intca_suspend(void); -extern void sh7372_intca_resume(void); - -extern unsigned long sh7372_cpu_resume; - -#ifdef CONFIG_PM -extern void __init sh7372_init_pm_domains(void); -#else -static inline void sh7372_init_pm_domains(void) {} -#endif - -extern void __init sh7372_pm_init_late(void); - -#endif /* __ASM_SH7372_H__ */ diff --git a/arch/arm/mach-shmobile/sh73a0.h b/arch/arm/mach-shmobile/sh73a0.h index f037c64b14fc..5a80f18b4fa0 100644 --- a/arch/arm/mach-shmobile/sh73a0.h +++ b/arch/arm/mach-shmobile/sh73a0.h @@ -77,7 +77,6 @@ extern void sh73a0_map_io(void); extern void sh73a0_earlytimer_init(void); extern void sh73a0_add_early_devices(void); extern void sh73a0_add_standard_devices(void); -extern void sh73a0_add_standard_devices_dt(void); extern void sh73a0_clock_init(void); extern void sh73a0_pinmux_init(void); extern void sh73a0_pm_init(void); diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S deleted file mode 100644 index 146b8de16432..000000000000 --- a/arch/arm/mach-shmobile/sleep-sh7372.S +++ /dev/null @@ -1,98 +0,0 @@ -/* - * sh7372 lowlevel sleep code for "Core Standby Mode" - * - * Copyright (C) 2011 Magnus Damm - * - * In "Core Standby Mode" the ARM core is off, but L2 cache is still on - * - * Based on mach-omap2/sleep34xx.S - * - * (C) Copyright 2007 Texas Instruments - * Karthik Dasu <karthik-dp@ti.com> - * - * (C) Copyright 2004 Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/memory.h> -#include <asm/assembler.h> - -#if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE) - .align 12 - .text - .global sh7372_resume_core_standby_sysc -sh7372_resume_core_standby_sysc: - ldr pc, 1f - - .align 2 - .globl sh7372_cpu_resume -sh7372_cpu_resume: -1: .space 4 - -#define SPDCR 0xe6180008 - - /* A3SM & A4S power down */ - .global sh7372_do_idle_sysc -sh7372_do_idle_sysc: - mov r8, r0 /* sleep mode passed in r0 */ - - /* - * Clear the SCTLR.C bit to prevent further data cache - * allocation. Clearing SCTLR.C would make all the data accesses - * strongly ordered and would not hit the cache. - */ - mrc p15, 0, r0, c1, c0, 0 - bic r0, r0, #(1 << 2) @ Disable the C bit - mcr p15, 0, r0, c1, c0, 0 - isb - - /* - * Clean and invalidate data cache again. - */ - ldr r1, kernel_flush - blx r1 - - /* disable L2 cache in the aux control register */ - mrc p15, 0, r10, c1, c0, 1 - bic r10, r10, #2 - mcr p15, 0, r10, c1, c0, 1 - isb - - /* - * The kernel doesn't interwork: v7_flush_dcache_all in particluar will - * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled. - * This sequence switches back to ARM. Note that .align may insert a - * nop: bx pc needs to be word-aligned in order to work. - */ - THUMB( .thumb ) - THUMB( .align ) - THUMB( bx pc ) - THUMB( nop ) - .arm - - /* Data memory barrier and Data sync barrier */ - dsb - dmb - - /* SYSC power down */ - ldr r0, =SPDCR - str r8, [r0] -1: - b 1b - - .align 2 -kernel_flush: - .word v7_flush_dcache_all -#endif diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 9fc280e24ef4..01f792fcb220 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -124,19 +124,12 @@ static int r8a7779_cpu_kill(unsigned int cpu) return 0; } - -static int r8a7779_cpu_disable(unsigned int cpu) -{ - /* only CPU1->3 have power domains, do not allow hotplug of CPU0 */ - return cpu == 0 ? -EPERM : 0; -} #endif /* CONFIG_HOTPLUG_CPU */ struct smp_operations r8a7779_smp_ops __initdata = { .smp_prepare_cpus = r8a7779_smp_prepare_cpus, .smp_boot_secondary = r8a7779_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU - .cpu_disable = r8a7779_cpu_disable, .cpu_die = shmobile_smp_scu_cpu_die, .cpu_kill = r8a7779_cpu_kill, #endif diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c index 9c3da1345b8b..930f45cbc08a 100644 --- a/arch/arm/mach-shmobile/smp-r8a7790.c +++ b/arch/arm/mach-shmobile/smp-r8a7790.c @@ -23,6 +23,7 @@ #include "common.h" #include "platsmp-apmu.h" #include "pm-rcar.h" +#include "rcar-gen2.h" #include "r8a7790.h" static struct rcar_sysc_ch r8a7790_ca15_scu = { @@ -37,11 +38,11 @@ static struct rcar_sysc_ch r8a7790_ca7_scu = { static struct rcar_apmu_config r8a7790_apmu_config[] = { { - .iomem = DEFINE_RES_MEM(0xe6152000, 0x88), + .iomem = DEFINE_RES_MEM(0xe6152000, 0x188), .cpus = { 0, 1, 2, 3 }, }, { - .iomem = DEFINE_RES_MEM(0xe6151000, 0x88), + .iomem = DEFINE_RES_MEM(0xe6151000, 0x188), .cpus = { 0x100, 0x0101, 0x102, 0x103 }, } }; @@ -54,7 +55,7 @@ static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus) ARRAY_SIZE(r8a7790_apmu_config)); /* turn on power to SCU */ - r8a7790_pm_init(); + rcar_gen2_pm_init(); rcar_sysc_power_up(&r8a7790_ca15_scu); rcar_sysc_power_up(&r8a7790_ca7_scu); } diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c index 7e49e0a52e32..5e2d1db79afa 100644 --- a/arch/arm/mach-shmobile/smp-r8a7791.c +++ b/arch/arm/mach-shmobile/smp-r8a7791.c @@ -27,7 +27,7 @@ static struct rcar_apmu_config r8a7791_apmu_config[] = { { - .iomem = DEFINE_RES_MEM(0xe6152000, 0x88), + .iomem = DEFINE_RES_MEM(0xe6152000, 0x188), .cpus = { 0, 1 }, } }; @@ -39,7 +39,7 @@ static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus) r8a7791_apmu_config, ARRAY_SIZE(r8a7791_apmu_config)); - r8a7791_pm_init(); + rcar_gen2_pm_init(); } static int r8a7791_smp_boot_secondary(unsigned int cpu, diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index c16dbfe9836c..2106d6b76a06 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -33,7 +33,7 @@ #define SH73A0_SCU_BASE 0xf0000000 -#ifdef CONFIG_HAVE_ARM_TWD +#if defined(CONFIG_HAVE_ARM_TWD) && !defined(CONFIG_ARCH_MULTIPLATFORM) static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, SH73A0_SCU_BASE + 0x600, 29); void __init sh73a0_register_twd(void) { diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index 483cb467bf65..a0f3b1cd497c 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -45,6 +45,6 @@ extern char secondary_trampoline, secondary_trampoline_end; extern unsigned long socfpga_cpu1start_addr; -#define SOCFPGA_SCU_VIRT_BASE 0xfffec000 +#define SOCFPGA_SCU_VIRT_BASE 0xfee00000 #endif diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index 383d61e138af..f5e597c207b9 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -23,6 +23,7 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/cacheflush.h> #include "core.h" @@ -73,6 +74,10 @@ void __init socfpga_sysmgr_init(void) (u32 *) &socfpga_cpu1start_addr)) pr_err("SMP: Need cpu1-start-addr in device tree.\n"); + /* Ensure that socfpga_cpu1start_addr is visible to other CPUs */ + smp_wmb(); + sync_cache_w(&socfpga_cpu1start_addr); + sys_manager_base_addr = of_iomap(np, 0); np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr"); diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c index b067390cef4e..b373acade338 100644 --- a/arch/arm/mach-sti/board-dt.c +++ b/arch/arm/mach-sti/board-dt.c @@ -18,6 +18,7 @@ static const char *stih41x_dt_match[] __initdata = { "st,stih415", "st,stih416", "st,stih407", + "st,stih410", "st,stih418", NULL }; diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index a77604fbaf25..81502b90dd91 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,10 +1,12 @@ menuconfig ARCH_SUNXI bool "Allwinner SoCs" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB + select ARCH_HAS_RESET_CONTROLLER select CLKSRC_MMIO select GENERIC_IRQ_CHIP select PINCTRL select SUN4I_TIMER + select RESET_CONTROLLER if ARCH_SUNXI @@ -20,10 +22,8 @@ config MACH_SUN5I config MACH_SUN6I bool "Allwinner A31 (sun6i) SoCs support" default ARCH_SUNXI - select ARCH_HAS_RESET_CONTROLLER select ARM_GIC select MFD_SUN6I_PRCM - select RESET_CONTROLLER select SUN5I_HSTIMER config MACH_SUN7I @@ -37,16 +37,12 @@ config MACH_SUN7I config MACH_SUN8I bool "Allwinner A23 (sun8i) SoCs support" default ARCH_SUNXI - select ARCH_HAS_RESET_CONTROLLER select ARM_GIC select MFD_SUN6I_PRCM - select RESET_CONTROLLER config MACH_SUN9I bool "Allwinner (sun9i) SoCs support" default ARCH_SUNXI - select ARCH_HAS_RESET_CONTROLLER select ARM_GIC - select RESET_CONTROLLER endif diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c index f2b586d7b15d..155807fa6fdd 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra114.c +++ b/arch/arm/mach-tegra/cpuidle-tegra114.c @@ -15,7 +15,7 @@ */ #include <asm/firmware.h> -#include <linux/clockchips.h> +#include <linux/tick.h> #include <linux/cpuidle.h> #include <linux/cpu_pm.h> #include <linux/kernel.h> @@ -44,7 +44,7 @@ static int tegra114_idle_power_down(struct cpuidle_device *dev, tegra_set_cpu_in_lp2(); cpu_pm_enter(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); + tick_broadcast_enter(); call_firmware_op(prepare_idle); @@ -52,7 +52,7 @@ static int tegra114_idle_power_down(struct cpuidle_device *dev, if (call_firmware_op(do_idle, 0) == -ENOSYS) cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); + tick_broadcast_exit(); cpu_pm_exit(); tegra_clear_cpu_in_lp2(); diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c index 4f25a7c7ca0f..88de2dce2e87 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -20,14 +20,13 @@ */ #include <linux/clk/tegra.h> -#include <linux/clockchips.h> +#include <linux/tick.h> #include <linux/cpuidle.h> #include <linux/cpu_pm.h> #include <linux/kernel.h> #include <linux/module.h> #include <asm/cpuidle.h> -#include <asm/proc-fns.h> #include <asm/smp_plat.h> #include <asm/suspend.h> @@ -136,11 +135,11 @@ static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev, if (tegra20_reset_cpu_1() || !tegra_cpu_rail_off_ready()) return false; - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); + tick_broadcast_enter(); tegra_idle_lp2_last(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); + tick_broadcast_exit(); if (cpu_online(1)) tegra20_wake_cpu1_from_reset(); @@ -153,13 +152,13 @@ static bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); + tick_broadcast_enter(); cpu_suspend(0, tegra20_sleep_cpu_secondary_finish); tegra20_cpu_clear_resettable(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); + tick_broadcast_exit(); return true; } diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c index f8815ed65d9d..4dbe1dae937c 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra30.c +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -20,14 +20,13 @@ */ #include <linux/clk/tegra.h> -#include <linux/clockchips.h> +#include <linux/tick.h> #include <linux/cpuidle.h> #include <linux/cpu_pm.h> #include <linux/kernel.h> #include <linux/module.h> #include <asm/cpuidle.h> -#include <asm/proc-fns.h> #include <asm/smp_plat.h> #include <asm/suspend.h> @@ -76,11 +75,11 @@ static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev, return false; } - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); + tick_broadcast_enter(); tegra_idle_lp2_last(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); + tick_broadcast_exit(); return true; } @@ -90,13 +89,13 @@ static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); + tick_broadcast_enter(); smp_wmb(); cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); + tick_broadcast_exit(); return true; } diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h index ee79808e93a3..81dc950b4881 100644 --- a/arch/arm/mach-tegra/iomap.h +++ b/arch/arm/mach-tegra/iomap.h @@ -31,21 +31,6 @@ #define TEGRA_ARM_INT_DIST_BASE 0x50041000 #define TEGRA_ARM_INT_DIST_SIZE SZ_4K -#define TEGRA_PRIMARY_ICTLR_BASE 0x60004000 -#define TEGRA_PRIMARY_ICTLR_SIZE SZ_64 - -#define TEGRA_SECONDARY_ICTLR_BASE 0x60004100 -#define TEGRA_SECONDARY_ICTLR_SIZE SZ_64 - -#define TEGRA_TERTIARY_ICTLR_BASE 0x60004200 -#define TEGRA_TERTIARY_ICTLR_SIZE SZ_64 - -#define TEGRA_QUATERNARY_ICTLR_BASE 0x60004300 -#define TEGRA_QUATERNARY_ICTLR_SIZE SZ_64 - -#define TEGRA_QUINARY_ICTLR_BASE 0x60004400 -#define TEGRA_QUINARY_ICTLR_SIZE SZ_64 - #define TEGRA_TMR1_BASE 0x60005000 #define TEGRA_TMR1_SIZE SZ_8 diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index ab95f5391a2b..3b9098d27ea5 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -30,43 +30,9 @@ #include "board.h" #include "iomap.h" -#define ICTLR_CPU_IEP_VFIQ 0x08 -#define ICTLR_CPU_IEP_FIR 0x14 -#define ICTLR_CPU_IEP_FIR_SET 0x18 -#define ICTLR_CPU_IEP_FIR_CLR 0x1c - -#define ICTLR_CPU_IER 0x20 -#define ICTLR_CPU_IER_SET 0x24 -#define ICTLR_CPU_IER_CLR 0x28 -#define ICTLR_CPU_IEP_CLASS 0x2C - -#define ICTLR_COP_IER 0x30 -#define ICTLR_COP_IER_SET 0x34 -#define ICTLR_COP_IER_CLR 0x38 -#define ICTLR_COP_IEP_CLASS 0x3c - -#define FIRST_LEGACY_IRQ 32 -#define TEGRA_MAX_NUM_ICTLRS 5 - #define SGI_MASK 0xFFFF -static int num_ictlrs; - -static void __iomem *ictlr_reg_base[] = { - IO_ADDRESS(TEGRA_PRIMARY_ICTLR_BASE), - IO_ADDRESS(TEGRA_SECONDARY_ICTLR_BASE), - IO_ADDRESS(TEGRA_TERTIARY_ICTLR_BASE), - IO_ADDRESS(TEGRA_QUATERNARY_ICTLR_BASE), - IO_ADDRESS(TEGRA_QUINARY_ICTLR_BASE), -}; - #ifdef CONFIG_PM_SLEEP -static u32 cop_ier[TEGRA_MAX_NUM_ICTLRS]; -static u32 cop_iep[TEGRA_MAX_NUM_ICTLRS]; -static u32 cpu_ier[TEGRA_MAX_NUM_ICTLRS]; -static u32 cpu_iep[TEGRA_MAX_NUM_ICTLRS]; - -static u32 ictlr_wake_mask[TEGRA_MAX_NUM_ICTLRS]; static void __iomem *tegra_gic_cpu_base; #endif @@ -83,140 +49,7 @@ bool tegra_pending_sgi(void) return false; } -static inline void tegra_irq_write_mask(unsigned int irq, unsigned long reg) -{ - void __iomem *base; - u32 mask; - - BUG_ON(irq < FIRST_LEGACY_IRQ || - irq >= FIRST_LEGACY_IRQ + num_ictlrs * 32); - - base = ictlr_reg_base[(irq - FIRST_LEGACY_IRQ) / 32]; - mask = BIT((irq - FIRST_LEGACY_IRQ) % 32); - - __raw_writel(mask, base + reg); -} - -static void tegra_mask(struct irq_data *d) -{ - if (d->hwirq < FIRST_LEGACY_IRQ) - return; - - tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IER_CLR); -} - -static void tegra_unmask(struct irq_data *d) -{ - if (d->hwirq < FIRST_LEGACY_IRQ) - return; - - tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IER_SET); -} - -static void tegra_ack(struct irq_data *d) -{ - if (d->hwirq < FIRST_LEGACY_IRQ) - return; - - tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IEP_FIR_CLR); -} - -static void tegra_eoi(struct irq_data *d) -{ - if (d->hwirq < FIRST_LEGACY_IRQ) - return; - - tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IEP_FIR_CLR); -} - -static int tegra_retrigger(struct irq_data *d) -{ - if (d->hwirq < FIRST_LEGACY_IRQ) - return 0; - - tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IEP_FIR_SET); - - return 1; -} - #ifdef CONFIG_PM_SLEEP -static int tegra_set_wake(struct irq_data *d, unsigned int enable) -{ - u32 irq = d->hwirq; - u32 index, mask; - - if (irq < FIRST_LEGACY_IRQ || - irq >= FIRST_LEGACY_IRQ + num_ictlrs * 32) - return -EINVAL; - - index = ((irq - FIRST_LEGACY_IRQ) / 32); - mask = BIT((irq - FIRST_LEGACY_IRQ) % 32); - if (enable) - ictlr_wake_mask[index] |= mask; - else - ictlr_wake_mask[index] &= ~mask; - - return 0; -} - -static int tegra_legacy_irq_suspend(void) -{ - unsigned long flags; - int i; - - local_irq_save(flags); - for (i = 0; i < num_ictlrs; i++) { - void __iomem *ictlr = ictlr_reg_base[i]; - /* Save interrupt state */ - cpu_ier[i] = readl_relaxed(ictlr + ICTLR_CPU_IER); - cpu_iep[i] = readl_relaxed(ictlr + ICTLR_CPU_IEP_CLASS); - cop_ier[i] = readl_relaxed(ictlr + ICTLR_COP_IER); - cop_iep[i] = readl_relaxed(ictlr + ICTLR_COP_IEP_CLASS); - - /* Disable COP interrupts */ - writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR); - - /* Disable CPU interrupts */ - writel_relaxed(~0ul, ictlr + ICTLR_CPU_IER_CLR); - - /* Enable the wakeup sources of ictlr */ - writel_relaxed(ictlr_wake_mask[i], ictlr + ICTLR_CPU_IER_SET); - } - local_irq_restore(flags); - - return 0; -} - -static void tegra_legacy_irq_resume(void) -{ - unsigned long flags; - int i; - - local_irq_save(flags); - for (i = 0; i < num_ictlrs; i++) { - void __iomem *ictlr = ictlr_reg_base[i]; - writel_relaxed(cpu_iep[i], ictlr + ICTLR_CPU_IEP_CLASS); - writel_relaxed(~0ul, ictlr + ICTLR_CPU_IER_CLR); - writel_relaxed(cpu_ier[i], ictlr + ICTLR_CPU_IER_SET); - writel_relaxed(cop_iep[i], ictlr + ICTLR_COP_IEP_CLASS); - writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR); - writel_relaxed(cop_ier[i], ictlr + ICTLR_COP_IER_SET); - } - local_irq_restore(flags); -} - -static struct syscore_ops tegra_legacy_irq_syscore_ops = { - .suspend = tegra_legacy_irq_suspend, - .resume = tegra_legacy_irq_resume, -}; - -int tegra_legacy_irq_syscore_init(void) -{ - register_syscore_ops(&tegra_legacy_irq_syscore_ops); - - return 0; -} - static int tegra_gic_notifier(struct notifier_block *self, unsigned long cmd, void *v) { @@ -251,45 +84,19 @@ static void tegra114_gic_cpu_pm_registration(void) cpu_pm_register_notifier(&tegra_gic_notifier_block); } #else -#define tegra_set_wake NULL static void tegra114_gic_cpu_pm_registration(void) { } #endif +static const struct of_device_id tegra_ictlr_match[] __initconst = { + { .compatible = "nvidia,tegra20-ictlr" }, + { .compatible = "nvidia,tegra30-ictlr" }, + { } +}; + void __init tegra_init_irq(void) { - int i; - void __iomem *distbase; - - distbase = IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE); - num_ictlrs = readl_relaxed(distbase + GIC_DIST_CTR) & 0x1f; - - if (num_ictlrs > ARRAY_SIZE(ictlr_reg_base)) { - WARN(1, "Too many (%d) interrupt controllers found. Maximum is %d.", - num_ictlrs, ARRAY_SIZE(ictlr_reg_base)); - num_ictlrs = ARRAY_SIZE(ictlr_reg_base); - } - - for (i = 0; i < num_ictlrs; i++) { - void __iomem *ictlr = ictlr_reg_base[i]; - writel(~0, ictlr + ICTLR_CPU_IER_CLR); - writel(0, ictlr + ICTLR_CPU_IEP_CLASS); - } - - gic_arch_extn.irq_ack = tegra_ack; - gic_arch_extn.irq_eoi = tegra_eoi; - gic_arch_extn.irq_mask = tegra_mask; - gic_arch_extn.irq_unmask = tegra_unmask; - gic_arch_extn.irq_retrigger = tegra_retrigger; - gic_arch_extn.irq_set_wake = tegra_set_wake; - gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND; - - /* - * Check if there is a devicetree present, since the GIC will be - * initialized elsewhere under DT. - */ - if (!of_have_populated_dt()) - gic_init(0, 29, distbase, - IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100)); + if (WARN_ON(!of_find_matching_node(NULL, tegra_ictlr_match))) + pr_warn("Outdated DT detected, suspend/resume will NOT work\n"); tegra114_gic_cpu_pm_registration(); } diff --git a/arch/arm/mach-tegra/irq.h b/arch/arm/mach-tegra/irq.h index bc05ce5613fb..5142649bba05 100644 --- a/arch/arm/mach-tegra/irq.h +++ b/arch/arm/mach-tegra/irq.h @@ -19,10 +19,4 @@ bool tegra_pending_sgi(void); -#ifdef CONFIG_PM_SLEEP -int tegra_legacy_irq_syscore_init(void); -#else -static inline int tegra_legacy_irq_syscore_init(void) { return 0; } -#endif - #endif diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 914341bcef25..861d88486dbe 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -82,7 +82,6 @@ static void __init tegra_dt_init_irq(void) { tegra_init_irq(); irqchip_init(); - tegra_legacy_irq_syscore_init(); } static void __init tegra_dt_init(void) diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index dbb2970ee7da..6ced0f680262 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -52,7 +52,7 @@ void ux500_restart(enum reboot_mode mode, const char *cmd) */ void __init ux500_init_irq(void) { - gic_arch_extn.flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND; + gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND); irqchip_init(); /* diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 3c2509b4b694..10f9389572da 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -42,6 +42,7 @@ if ARCH_VEXPRESS config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA bool "Enable A5 and A9 only errata work-arounds" default y + select ARM_ERRATA_643719 if SMP select ARM_ERRATA_720789 select PL310_ERRATA_753970 if CACHE_L2X0 help @@ -53,7 +54,7 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA config ARCH_VEXPRESS_DCSCB bool "Dual Cluster System Control Block (DCSCB) support" depends on MCPM - select ARM_CCI + select ARM_CCI400_PORT_CTRL help Support for the Dual Cluster System Configuration Block (DCSCB). This is needed to provide CPU and cluster power management @@ -71,7 +72,7 @@ config ARCH_VEXPRESS_SPC config ARCH_VEXPRESS_TC2_PM bool "Versatile Express TC2 power management" depends on MCPM - select ARM_CCI + select ARM_CCI400_PORT_CTRL select ARCH_VEXPRESS_SPC select ARM_CPU_SUSPEND help diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c index 30b993399ed7..5cedcf572104 100644 --- a/arch/arm/mach-vexpress/dcscb.c +++ b/arch/arm/mach-vexpress/dcscb.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/io.h> -#include <linux/spinlock.h> #include <linux/errno.h> #include <linux/of_address.h> #include <linux/vexpress.h> @@ -36,163 +35,102 @@ #define KFC_CFG_W 0x2c #define DCS_CFG_R 0x30 -/* - * We can't use regular spinlocks. In the switcher case, it is possible - * for an outbound CPU to call power_down() while its inbound counterpart - * is already live using the same logical CPU number which trips lockdep - * debugging. - */ -static arch_spinlock_t dcscb_lock = __ARCH_SPIN_LOCK_UNLOCKED; - static void __iomem *dcscb_base; -static int dcscb_use_count[4][2]; static int dcscb_allcpus_mask[2]; -static int dcscb_power_up(unsigned int cpu, unsigned int cluster) +static int dcscb_cpu_powerup(unsigned int cpu, unsigned int cluster) { unsigned int rst_hold, cpumask = (1 << cpu); - unsigned int all_mask; pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); - if (cpu >= 4 || cluster >= 2) + if (cluster >= 2 || !(cpumask & dcscb_allcpus_mask[cluster])) return -EINVAL; - all_mask = dcscb_allcpus_mask[cluster]; + rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); + rst_hold &= ~(cpumask | (cpumask << 4)); + writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); + return 0; +} - /* - * Since this is called with IRQs enabled, and no arch_spin_lock_irq - * variant exists, we need to disable IRQs manually here. - */ - local_irq_disable(); - arch_spin_lock(&dcscb_lock); - - dcscb_use_count[cpu][cluster]++; - if (dcscb_use_count[cpu][cluster] == 1) { - rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); - if (rst_hold & (1 << 8)) { - /* remove cluster reset and add individual CPU's reset */ - rst_hold &= ~(1 << 8); - rst_hold |= all_mask; - } - rst_hold &= ~(cpumask | (cpumask << 4)); - writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); - } else if (dcscb_use_count[cpu][cluster] != 2) { - /* - * The only possible values are: - * 0 = CPU down - * 1 = CPU (still) up - * 2 = CPU requested to be up before it had a chance - * to actually make itself down. - * Any other value is a bug. - */ - BUG(); - } +static int dcscb_cluster_powerup(unsigned int cluster) +{ + unsigned int rst_hold; - arch_spin_unlock(&dcscb_lock); - local_irq_enable(); + pr_debug("%s: cluster %u\n", __func__, cluster); + if (cluster >= 2) + return -EINVAL; + /* remove cluster reset and add individual CPU's reset */ + rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); + rst_hold &= ~(1 << 8); + rst_hold |= dcscb_allcpus_mask[cluster]; + writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); return 0; } -static void dcscb_power_down(void) +static void dcscb_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster) { - unsigned int mpidr, cpu, cluster, rst_hold, cpumask, all_mask; - bool last_man = false, skip_wfi = false; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - cpumask = (1 << cpu); + unsigned int rst_hold; pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); - BUG_ON(cpu >= 4 || cluster >= 2); - - all_mask = dcscb_allcpus_mask[cluster]; - - __mcpm_cpu_going_down(cpu, cluster); - - arch_spin_lock(&dcscb_lock); - BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); - dcscb_use_count[cpu][cluster]--; - if (dcscb_use_count[cpu][cluster] == 0) { - rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); - rst_hold |= cpumask; - if (((rst_hold | (rst_hold >> 4)) & all_mask) == all_mask) { - rst_hold |= (1 << 8); - last_man = true; - } - writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); - } else if (dcscb_use_count[cpu][cluster] == 1) { - /* - * A power_up request went ahead of us. - * Even if we do not want to shut this CPU down, - * the caller expects a certain state as if the WFI - * was aborted. So let's continue with cache cleaning. - */ - skip_wfi = true; - } else - BUG(); - - if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { - arch_spin_unlock(&dcscb_lock); - - /* Flush all cache levels for this cluster. */ - v7_exit_coherency_flush(all); - - /* - * A full outer cache flush could be needed at this point - * on platforms with such a cache, depending on where the - * outer cache sits. In some cases the notion of a "last - * cluster standing" would need to be implemented if the - * outer cache is shared across clusters. In any case, when - * the outer cache needs flushing, there is no concurrent - * access to the cache controller to worry about and no - * special locking besides what is already provided by the - * MCPM state machinery is needed. - */ - - /* - * Disable cluster-level coherency by masking - * incoming snoops and DVM messages: - */ - cci_disable_port_by_cpu(mpidr); - - __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); - } else { - arch_spin_unlock(&dcscb_lock); - - /* Disable and flush the local CPU cache. */ - v7_exit_coherency_flush(louis); - } + BUG_ON(cluster >= 2 || !((1 << cpu) & dcscb_allcpus_mask[cluster])); - __mcpm_cpu_down(cpu, cluster); + rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); + rst_hold |= (1 << cpu); + writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); +} - /* Now we are prepared for power-down, do it: */ - dsb(); - if (!skip_wfi) - wfi(); +static void dcscb_cluster_powerdown_prepare(unsigned int cluster) +{ + unsigned int rst_hold; - /* Not dead at this point? Let our caller cope. */ + pr_debug("%s: cluster %u\n", __func__, cluster); + BUG_ON(cluster >= 2); + + rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); + rst_hold |= (1 << 8); + writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); } -static const struct mcpm_platform_ops dcscb_power_ops = { - .power_up = dcscb_power_up, - .power_down = dcscb_power_down, -}; +static void dcscb_cpu_cache_disable(void) +{ + /* Disable and flush the local CPU cache. */ + v7_exit_coherency_flush(louis); +} -static void __init dcscb_usage_count_init(void) +static void dcscb_cluster_cache_disable(void) { - unsigned int mpidr, cpu, cluster; + /* Flush all cache levels for this cluster. */ + v7_exit_coherency_flush(all); - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + /* + * A full outer cache flush could be needed at this point + * on platforms with such a cache, depending on where the + * outer cache sits. In some cases the notion of a "last + * cluster standing" would need to be implemented if the + * outer cache is shared across clusters. In any case, when + * the outer cache needs flushing, there is no concurrent + * access to the cache controller to worry about and no + * special locking besides what is already provided by the + * MCPM state machinery is needed. + */ - pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); - BUG_ON(cpu >= 4 || cluster >= 2); - dcscb_use_count[cpu][cluster] = 1; + /* + * Disable cluster-level coherency by masking + * incoming snoops and DVM messages: + */ + cci_disable_port_by_cpu(read_cpuid_mpidr()); } +static const struct mcpm_platform_ops dcscb_power_ops = { + .cpu_powerup = dcscb_cpu_powerup, + .cluster_powerup = dcscb_cluster_powerup, + .cpu_powerdown_prepare = dcscb_cpu_powerdown_prepare, + .cluster_powerdown_prepare = dcscb_cluster_powerdown_prepare, + .cpu_cache_disable = dcscb_cpu_cache_disable, + .cluster_cache_disable = dcscb_cluster_cache_disable, +}; + extern void dcscb_power_up_setup(unsigned int affinity_level); static int __init dcscb_init(void) @@ -213,7 +151,6 @@ static int __init dcscb_init(void) cfg = readl_relaxed(dcscb_base + DCS_CFG_R); dcscb_allcpus_mask[0] = (1 << (((cfg >> 16) >> (0 << 2)) & 0xf)) - 1; dcscb_allcpus_mask[1] = (1 << (((cfg >> 16) >> (1 << 2)) & 0xf)) - 1; - dcscb_usage_count_init(); ret = mcpm_platform_register(&dcscb_power_ops); if (!ret) diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c index 2fb78b4648cb..b3328cd46c33 100644 --- a/arch/arm/mach-vexpress/tc2_pm.c +++ b/arch/arm/mach-vexpress/tc2_pm.c @@ -18,7 +18,6 @@ #include <linux/kernel.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <linux/spinlock.h> #include <linux/errno.h> #include <linux/irqchip/arm-gic.h> @@ -44,101 +43,36 @@ static void __iomem *scc; -/* - * We can't use regular spinlocks. In the switcher case, it is possible - * for an outbound CPU to call power_down() after its inbound counterpart - * is already live using the same logical CPU number which trips lockdep - * debugging. - */ -static arch_spinlock_t tc2_pm_lock = __ARCH_SPIN_LOCK_UNLOCKED; - #define TC2_CLUSTERS 2 #define TC2_MAX_CPUS_PER_CLUSTER 3 static unsigned int tc2_nr_cpus[TC2_CLUSTERS]; -/* Keep per-cpu usage count to cope with unordered up/down requests */ -static int tc2_pm_use_count[TC2_MAX_CPUS_PER_CLUSTER][TC2_CLUSTERS]; - -#define tc2_cluster_unused(cluster) \ - (!tc2_pm_use_count[0][cluster] && \ - !tc2_pm_use_count[1][cluster] && \ - !tc2_pm_use_count[2][cluster]) - -static int tc2_pm_power_up(unsigned int cpu, unsigned int cluster) +static int tc2_pm_cpu_powerup(unsigned int cpu, unsigned int cluster) { pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster]) return -EINVAL; - - /* - * Since this is called with IRQs enabled, and no arch_spin_lock_irq - * variant exists, we need to disable IRQs manually here. - */ - local_irq_disable(); - arch_spin_lock(&tc2_pm_lock); - - if (tc2_cluster_unused(cluster)) - ve_spc_powerdown(cluster, false); - - tc2_pm_use_count[cpu][cluster]++; - if (tc2_pm_use_count[cpu][cluster] == 1) { - ve_spc_set_resume_addr(cluster, cpu, - virt_to_phys(mcpm_entry_point)); - ve_spc_cpu_wakeup_irq(cluster, cpu, true); - } else if (tc2_pm_use_count[cpu][cluster] != 2) { - /* - * The only possible values are: - * 0 = CPU down - * 1 = CPU (still) up - * 2 = CPU requested to be up before it had a chance - * to actually make itself down. - * Any other value is a bug. - */ - BUG(); - } - - arch_spin_unlock(&tc2_pm_lock); - local_irq_enable(); - + ve_spc_set_resume_addr(cluster, cpu, + virt_to_phys(mcpm_entry_point)); + ve_spc_cpu_wakeup_irq(cluster, cpu, true); return 0; } -static void tc2_pm_down(u64 residency) +static int tc2_pm_cluster_powerup(unsigned int cluster) { - unsigned int mpidr, cpu, cluster; - bool last_man = false, skip_wfi = false; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + pr_debug("%s: cluster %u\n", __func__, cluster); + if (cluster >= TC2_CLUSTERS) + return -EINVAL; + ve_spc_powerdown(cluster, false); + return 0; +} +static void tc2_pm_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster) +{ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER); - - __mcpm_cpu_going_down(cpu, cluster); - - arch_spin_lock(&tc2_pm_lock); - BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); - tc2_pm_use_count[cpu][cluster]--; - if (tc2_pm_use_count[cpu][cluster] == 0) { - ve_spc_cpu_wakeup_irq(cluster, cpu, true); - if (tc2_cluster_unused(cluster)) { - ve_spc_powerdown(cluster, true); - ve_spc_global_wakeup_irq(true); - last_man = true; - } - } else if (tc2_pm_use_count[cpu][cluster] == 1) { - /* - * A power_up request went ahead of us. - * Even if we do not want to shut this CPU down, - * the caller expects a certain state as if the WFI - * was aborted. So let's continue with cache cleaning. - */ - skip_wfi = true; - } else - BUG(); - + ve_spc_cpu_wakeup_irq(cluster, cpu, true); /* * If the CPU is committed to power down, make sure * the power controller will be in charge of waking it @@ -146,55 +80,38 @@ static void tc2_pm_down(u64 residency) * to the CPU by disabling the GIC CPU IF to prevent wfi * from completing execution behind power controller back */ - if (!skip_wfi) - gic_cpu_if_down(); - - if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { - arch_spin_unlock(&tc2_pm_lock); - - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { - /* - * On the Cortex-A15 we need to disable - * L2 prefetching before flushing the cache. - */ - asm volatile( - "mcr p15, 1, %0, c15, c0, 3 \n\t" - "isb \n\t" - "dsb " - : : "r" (0x400) ); - } - - v7_exit_coherency_flush(all); - - cci_disable_port_by_cpu(mpidr); - - __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); - } else { - /* - * If last man then undo any setup done previously. - */ - if (last_man) { - ve_spc_powerdown(cluster, false); - ve_spc_global_wakeup_irq(false); - } - - arch_spin_unlock(&tc2_pm_lock); - - v7_exit_coherency_flush(louis); - } - - __mcpm_cpu_down(cpu, cluster); + gic_cpu_if_down(); +} - /* Now we are prepared for power-down, do it: */ - if (!skip_wfi) - wfi(); +static void tc2_pm_cluster_powerdown_prepare(unsigned int cluster) +{ + pr_debug("%s: cluster %u\n", __func__, cluster); + BUG_ON(cluster >= TC2_CLUSTERS); + ve_spc_powerdown(cluster, true); + ve_spc_global_wakeup_irq(true); +} - /* Not dead at this point? Let our caller cope. */ +static void tc2_pm_cpu_cache_disable(void) +{ + v7_exit_coherency_flush(louis); } -static void tc2_pm_power_down(void) +static void tc2_pm_cluster_cache_disable(void) { - tc2_pm_down(0); + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { + /* + * On the Cortex-A15 we need to disable + * L2 prefetching before flushing the cache. + */ + asm volatile( + "mcr p15, 1, %0, c15, c0, 3 \n\t" + "isb \n\t" + "dsb " + : : "r" (0x400) ); + } + + v7_exit_coherency_flush(all); + cci_disable_port_by_cpu(read_cpuid_mpidr()); } static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster) @@ -217,27 +134,21 @@ static int tc2_pm_wait_for_powerdown(unsigned int cpu, unsigned int cluster) BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER); for (tries = 0; tries < TIMEOUT_MSEC / POLL_MSEC; ++tries) { + pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n", + __func__, cpu, cluster, + readl_relaxed(scc + RESET_CTRL)); + /* - * Only examine the hardware state if the target CPU has - * caught up at least as far as tc2_pm_down(): + * We need the CPU to reach WFI, but the power + * controller may put the cluster in reset and + * power it off as soon as that happens, before + * we have a chance to see STANDBYWFI. + * + * So we need to check for both conditions: */ - if (ACCESS_ONCE(tc2_pm_use_count[cpu][cluster]) == 0) { - pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n", - __func__, cpu, cluster, - readl_relaxed(scc + RESET_CTRL)); - - /* - * We need the CPU to reach WFI, but the power - * controller may put the cluster in reset and - * power it off as soon as that happens, before - * we have a chance to see STANDBYWFI. - * - * So we need to check for both conditions: - */ - if (tc2_core_in_reset(cpu, cluster) || - ve_spc_cpu_in_wfi(cpu, cluster)) - return 0; /* success: the CPU is halted */ - } + if (tc2_core_in_reset(cpu, cluster) || + ve_spc_cpu_in_wfi(cpu, cluster)) + return 0; /* success: the CPU is halted */ /* Otherwise, wait and retry: */ msleep(POLL_MSEC); @@ -246,72 +157,40 @@ static int tc2_pm_wait_for_powerdown(unsigned int cpu, unsigned int cluster) return -ETIMEDOUT; /* timeout */ } -static void tc2_pm_suspend(u64 residency) +static void tc2_pm_cpu_suspend_prepare(unsigned int cpu, unsigned int cluster) { - unsigned int mpidr, cpu, cluster; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point)); - tc2_pm_down(residency); } -static void tc2_pm_powered_up(void) +static void tc2_pm_cpu_is_up(unsigned int cpu, unsigned int cluster) { - unsigned int mpidr, cpu, cluster; - unsigned long flags; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER); - - local_irq_save(flags); - arch_spin_lock(&tc2_pm_lock); - - if (tc2_cluster_unused(cluster)) { - ve_spc_powerdown(cluster, false); - ve_spc_global_wakeup_irq(false); - } - - if (!tc2_pm_use_count[cpu][cluster]) - tc2_pm_use_count[cpu][cluster] = 1; - ve_spc_cpu_wakeup_irq(cluster, cpu, false); ve_spc_set_resume_addr(cluster, cpu, 0); +} - arch_spin_unlock(&tc2_pm_lock); - local_irq_restore(flags); +static void tc2_pm_cluster_is_up(unsigned int cluster) +{ + pr_debug("%s: cluster %u\n", __func__, cluster); + BUG_ON(cluster >= TC2_CLUSTERS); + ve_spc_powerdown(cluster, false); + ve_spc_global_wakeup_irq(false); } static const struct mcpm_platform_ops tc2_pm_power_ops = { - .power_up = tc2_pm_power_up, - .power_down = tc2_pm_power_down, + .cpu_powerup = tc2_pm_cpu_powerup, + .cluster_powerup = tc2_pm_cluster_powerup, + .cpu_suspend_prepare = tc2_pm_cpu_suspend_prepare, + .cpu_powerdown_prepare = tc2_pm_cpu_powerdown_prepare, + .cluster_powerdown_prepare = tc2_pm_cluster_powerdown_prepare, + .cpu_cache_disable = tc2_pm_cpu_cache_disable, + .cluster_cache_disable = tc2_pm_cluster_cache_disable, .wait_for_powerdown = tc2_pm_wait_for_powerdown, - .suspend = tc2_pm_suspend, - .powered_up = tc2_pm_powered_up, + .cpu_is_up = tc2_pm_cpu_is_up, + .cluster_is_up = tc2_pm_cluster_is_up, }; -static bool __init tc2_pm_usage_count_init(void) -{ - unsigned int mpidr, cpu, cluster; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - - pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); - if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster]) { - pr_err("%s: boot CPU is out of bound!\n", __func__); - return false; - } - tc2_pm_use_count[cpu][cluster] = 1; - return true; -} - /* * Enable cluster-level coherency, in preparation for turning on the MMU. */ @@ -323,23 +202,9 @@ static void __naked tc2_pm_power_up_setup(unsigned int affinity_level) " b cci_enable_port_for_self "); } -static void __init tc2_cache_off(void) -{ - pr_info("TC2: disabling cache during MCPM loopback test\n"); - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { - /* disable L2 prefetching on the Cortex-A15 */ - asm volatile( - "mcr p15, 1, %0, c15, c0, 3 \n\t" - "isb \n\t" - "dsb " - : : "r" (0x400) ); - } - v7_exit_coherency_flush(all); - cci_disable_port_by_cpu(read_cpuid_mpidr()); -} - static int __init tc2_pm_init(void) { + unsigned int mpidr, cpu, cluster; int ret, irq; u32 a15_cluster_id, a7_cluster_id, sys_info; struct device_node *np; @@ -379,14 +244,20 @@ static int __init tc2_pm_init(void) if (!cci_probed()) return -ENODEV; - if (!tc2_pm_usage_count_init()) + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster]) { + pr_err("%s: boot CPU is out of bound!\n", __func__); return -EINVAL; + } ret = mcpm_platform_register(&tc2_pm_power_ops); if (!ret) { mcpm_sync_init(tc2_pm_power_up_setup); /* test if we can (re)enable the CCI on our own */ - BUG_ON(mcpm_loopback(tc2_cache_off) != 0); + BUG_ON(mcpm_loopback(tc2_pm_cluster_cache_disable) != 0); pr_info("TC2 power management initialized\n"); } return ret; diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index c887196cfdbe..58ef2a700414 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -186,7 +186,7 @@ static void __init zynq_map_io(void) static void __init zynq_irq_init(void) { - gic_arch_extn.flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND; + gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND); irqchip_init(); } diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 9b4f29e595a4..b4f92b9a13ac 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -738,7 +738,7 @@ config CPU_ICACHE_DISABLE config CPU_DCACHE_DISABLE bool "Disable D-Cache (C-bit)" - depends on CPU_CP15 + depends on CPU_CP15 && !SMP help Say Y here to disable the processor data cache. Unless you have a reason not to or are unsure, say N. @@ -825,6 +825,20 @@ config KUSER_HELPERS Say N here only if you are absolutely certain that you do not need these helpers; otherwise, the safe option is to say Y. +config VDSO + bool "Enable VDSO for acceleration of some system calls" + depends on AEABI && MMU && CPU_V7 + default y if ARM_ARCH_TIMER + select GENERIC_TIME_VSYSCALL + help + Place in the process address space an ELF shared object + providing fast implementations of gettimeofday and + clock_gettime. Systems that implement the ARM architected + timer will receive maximum benefit. + + You must have glibc 2.22 or later for programs to seamlessly + take advantage of this. + config DMA_CACHE_RWFO bool "Enable read/write for ownership DMA cache maintenance" depends on CPU_V6K && SMP diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 2c0c541c60ca..9769f1eefe3b 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -201,7 +201,7 @@ union offset_union { THUMB( "1: "ins" %1, [%2]\n" ) \ THUMB( " add %2, %2, #1\n" ) \ "2:\n" \ - " .pushsection .fixup,\"ax\"\n" \ + " .pushsection .text.fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, #1\n" \ " b 2b\n" \ @@ -261,7 +261,7 @@ union offset_union { " mov %1, %1, "NEXT_BYTE"\n" \ "2: "ins" %1, [%2]\n" \ "3:\n" \ - " .pushsection .fixup,\"ax\"\n" \ + " .pushsection .text.fixup,\"ax\"\n" \ " .align 2\n" \ "4: mov %0, #1\n" \ " b 3b\n" \ @@ -301,7 +301,7 @@ union offset_union { " mov %1, %1, "NEXT_BYTE"\n" \ "4: "ins" %1, [%2]\n" \ "5:\n" \ - " .pushsection .fixup,\"ax\"\n" \ + " .pushsection .text.fixup,\"ax\"\n" \ " .align 2\n" \ "6: mov %0, #1\n" \ " b 5b\n" \ diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index c6c7696b8db9..e309c8f35af5 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -1131,23 +1131,22 @@ static void __init l2c310_of_parse(const struct device_node *np, } ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_512K); - if (ret) - return; - - switch (assoc) { - case 16: - *aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK; - *aux_val |= L310_AUX_CTRL_ASSOCIATIVITY_16; - *aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK; - break; - case 8: - *aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK; - *aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK; - break; - default: - pr_err("L2C-310 OF cache associativity %d invalid, only 8 or 16 permitted\n", - assoc); - break; + if (!ret) { + switch (assoc) { + case 16: + *aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK; + *aux_val |= L310_AUX_CTRL_ASSOCIATIVITY_16; + *aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK; + break; + case 8: + *aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK; + *aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK; + break; + default: + pr_err("L2C-310 OF cache associativity %d invalid, only 8 or 16 permitted\n", + assoc); + break; + } } prefetch = l2x0_saved_regs.prefetch_ctrl; @@ -1648,6 +1647,7 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) struct device_node *np; struct resource res; u32 cache_id, old_aux; + u32 cache_level = 2; np = of_find_matching_node(NULL, l2x0_ids); if (!np) @@ -1680,6 +1680,12 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) if (!of_property_read_bool(np, "cache-unified")) pr_err("L2C: device tree omits to specify unified cache\n"); + if (of_property_read_u32(np, "cache-level", &cache_level)) + pr_err("L2C: device tree omits to specify cache-level\n"); + + if (cache_level != 2) + pr_err("L2C: device tree specifies invalid cache level\n"); + /* Read back current (default) hardware configuration */ if (data->save) data->save(l2x0_base); diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index b966656d2c2d..a134d8a13d00 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -36,10 +36,10 @@ ENTRY(v7_invalidate_l1) mcr p15, 2, r0, c0, c0, 0 mrc p15, 1, r0, c0, c0, 0 - ldr r1, =0x7fff + movw r1, #0x7fff and r2, r1, r0, lsr #13 - ldr r1, =0x3ff + movw r1, #0x3ff and r3, r1, r0, lsr #3 @ NumWays - 1 add r2, r2, #1 @ NumSets @@ -90,21 +90,20 @@ ENDPROC(v7_flush_icache_all) ENTRY(v7_flush_dcache_louis) dmb @ ensure ordering with previous memory accesses mrc p15, 1, r0, c0, c0, 1 @ read clidr, r0 = clidr - ALT_SMP(ands r3, r0, #(7 << 21)) @ extract LoUIS from clidr - ALT_UP(ands r3, r0, #(7 << 27)) @ extract LoUU from clidr +ALT_SMP(mov r3, r0, lsr #20) @ move LoUIS into position +ALT_UP( mov r3, r0, lsr #26) @ move LoUU into position + ands r3, r3, #7 << 1 @ extract LoU*2 field from clidr + bne start_flush_levels @ LoU != 0, start flushing #ifdef CONFIG_ARM_ERRATA_643719 - ALT_SMP(mrceq p15, 0, r2, c0, c0, 0) @ read main ID register - ALT_UP(reteq lr) @ LoUU is zero, so nothing to do - ldreq r1, =0x410fc090 @ ID of ARM Cortex A9 r0p? - biceq r2, r2, #0x0000000f @ clear minor revision number - teqeq r2, r1 @ test for errata affected core and if so... - orreqs r3, #(1 << 21) @ fix LoUIS value (and set flags state to 'ne') +ALT_SMP(mrc p15, 0, r2, c0, c0, 0) @ read main ID register +ALT_UP( ret lr) @ LoUU is zero, so nothing to do + movw r1, #:lower16:(0x410fc090 >> 4) @ ID of ARM Cortex A9 r0p? + movt r1, #:upper16:(0x410fc090 >> 4) + teq r1, r2, lsr #4 @ test for errata affected core and if so... + moveq r3, #1 << 1 @ fix LoUIS value + beq start_flush_levels @ start flushing cache levels #endif - ALT_SMP(mov r3, r3, lsr #20) @ r3 = LoUIS * 2 - ALT_UP(mov r3, r3, lsr #26) @ r3 = LoUU * 2 - reteq lr @ return if level == 0 - mov r10, #0 @ r10 (starting level) = 0 - b flush_levels @ start flushing cache levels + ret lr ENDPROC(v7_flush_dcache_louis) /* @@ -119,9 +118,10 @@ ENDPROC(v7_flush_dcache_louis) ENTRY(v7_flush_dcache_all) dmb @ ensure ordering with previous memory accesses mrc p15, 1, r0, c0, c0, 1 @ read clidr - ands r3, r0, #0x7000000 @ extract loc from clidr - mov r3, r3, lsr #23 @ left align loc bit field + mov r3, r0, lsr #23 @ move LoC into position + ands r3, r3, #7 << 1 @ extract LoC*2 from clidr beq finished @ if loc is 0, then no need to clean +start_flush_levels: mov r10, #0 @ start clean at cache level 0 flush_levels: add r2, r10, r10, lsr #1 @ work out 3x current cache level @@ -140,10 +140,10 @@ flush_levels: #endif and r2, r1, #7 @ extract the length of the cache lines add r2, r2, #4 @ add 4 (line length offset) - ldr r4, =0x3ff + movw r4, #0x3ff ands r4, r4, r1, lsr #3 @ find maximum number on the way size clz r5, r4 @ find bit position of way size increment - ldr r7, =0x7fff + movw r7, #0x7fff ands r7, r7, r1, lsr #13 @ extract max number of the index size loop1: mov r9, r7 @ create working copy of max index diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 170a116d1b29..09c5fe3d30c2 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -171,7 +171,7 @@ static int __dma_supported(struct device *dev, u64 mask, bool warn) */ if (sizeof(mask) != sizeof(dma_addr_t) && mask > (dma_addr_t)~0 && - dma_to_pfn(dev, ~0) < max_pfn) { + dma_to_pfn(dev, ~0) < max_pfn - 1) { if (warn) { dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n", mask); @@ -289,11 +289,11 @@ static void __dma_free_buffer(struct page *page, size_t size) static void *__alloc_from_contiguous(struct device *dev, size_t size, pgprot_t prot, struct page **ret_page, - const void *caller); + const void *caller, bool want_vaddr); static void *__alloc_remap_buffer(struct device *dev, size_t size, gfp_t gfp, pgprot_t prot, struct page **ret_page, - const void *caller); + const void *caller, bool want_vaddr); static void * __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot, @@ -357,10 +357,10 @@ static int __init atomic_pool_init(void) if (dev_get_cma_area(NULL)) ptr = __alloc_from_contiguous(NULL, atomic_pool_size, prot, - &page, atomic_pool_init); + &page, atomic_pool_init, true); else ptr = __alloc_remap_buffer(NULL, atomic_pool_size, gfp, prot, - &page, atomic_pool_init); + &page, atomic_pool_init, true); if (ptr) { int ret; @@ -467,13 +467,15 @@ static void __dma_remap(struct page *page, size_t size, pgprot_t prot) static void *__alloc_remap_buffer(struct device *dev, size_t size, gfp_t gfp, pgprot_t prot, struct page **ret_page, - const void *caller) + const void *caller, bool want_vaddr) { struct page *page; - void *ptr; + void *ptr = NULL; page = __dma_alloc_buffer(dev, size, gfp); if (!page) return NULL; + if (!want_vaddr) + goto out; ptr = __dma_alloc_remap(page, size, gfp, prot, caller); if (!ptr) { @@ -481,6 +483,7 @@ static void *__alloc_remap_buffer(struct device *dev, size_t size, gfp_t gfp, return NULL; } + out: *ret_page = page; return ptr; } @@ -523,12 +526,12 @@ static int __free_from_pool(void *start, size_t size) static void *__alloc_from_contiguous(struct device *dev, size_t size, pgprot_t prot, struct page **ret_page, - const void *caller) + const void *caller, bool want_vaddr) { unsigned long order = get_order(size); size_t count = size >> PAGE_SHIFT; struct page *page; - void *ptr; + void *ptr = NULL; page = dma_alloc_from_contiguous(dev, count, order); if (!page) @@ -536,6 +539,9 @@ static void *__alloc_from_contiguous(struct device *dev, size_t size, __dma_clear_buffer(page, size); + if (!want_vaddr) + goto out; + if (PageHighMem(page)) { ptr = __dma_alloc_remap(page, size, GFP_KERNEL, prot, caller); if (!ptr) { @@ -546,17 +552,21 @@ static void *__alloc_from_contiguous(struct device *dev, size_t size, __dma_remap(page, size, prot); ptr = page_address(page); } + + out: *ret_page = page; return ptr; } static void __free_from_contiguous(struct device *dev, struct page *page, - void *cpu_addr, size_t size) + void *cpu_addr, size_t size, bool want_vaddr) { - if (PageHighMem(page)) - __dma_free_remap(cpu_addr, size); - else - __dma_remap(page, size, PAGE_KERNEL); + if (want_vaddr) { + if (PageHighMem(page)) + __dma_free_remap(cpu_addr, size); + else + __dma_remap(page, size, PAGE_KERNEL); + } dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT); } @@ -574,12 +584,12 @@ static inline pgprot_t __get_dma_pgprot(struct dma_attrs *attrs, pgprot_t prot) #define nommu() 1 -#define __get_dma_pgprot(attrs, prot) __pgprot(0) -#define __alloc_remap_buffer(dev, size, gfp, prot, ret, c) NULL +#define __get_dma_pgprot(attrs, prot) __pgprot(0) +#define __alloc_remap_buffer(dev, size, gfp, prot, ret, c, wv) NULL #define __alloc_from_pool(size, ret_page) NULL -#define __alloc_from_contiguous(dev, size, prot, ret, c) NULL +#define __alloc_from_contiguous(dev, size, prot, ret, c, wv) NULL #define __free_from_pool(cpu_addr, size) 0 -#define __free_from_contiguous(dev, page, cpu_addr, size) do { } while (0) +#define __free_from_contiguous(dev, page, cpu_addr, size, wv) do { } while (0) #define __dma_free_remap(cpu_addr, size) do { } while (0) #endif /* CONFIG_MMU */ @@ -599,11 +609,13 @@ static void *__alloc_simple_buffer(struct device *dev, size_t size, gfp_t gfp, static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, - gfp_t gfp, pgprot_t prot, bool is_coherent, const void *caller) + gfp_t gfp, pgprot_t prot, bool is_coherent, + struct dma_attrs *attrs, const void *caller) { u64 mask = get_coherent_dma_mask(dev); struct page *page = NULL; void *addr; + bool want_vaddr; #ifdef CONFIG_DMA_API_DEBUG u64 limit = (mask + 1) & ~mask; @@ -631,20 +643,21 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, *handle = DMA_ERROR_CODE; size = PAGE_ALIGN(size); + want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs); if (is_coherent || nommu()) addr = __alloc_simple_buffer(dev, size, gfp, &page); else if (!(gfp & __GFP_WAIT)) addr = __alloc_from_pool(size, &page); else if (!dev_get_cma_area(dev)) - addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller); + addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller, want_vaddr); else - addr = __alloc_from_contiguous(dev, size, prot, &page, caller); + addr = __alloc_from_contiguous(dev, size, prot, &page, caller, want_vaddr); - if (addr) + if (page) *handle = pfn_to_dma(dev, page_to_pfn(page)); - return addr; + return want_vaddr ? addr : page; } /* @@ -661,7 +674,7 @@ void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, return memory; return __dma_alloc(dev, size, handle, gfp, prot, false, - __builtin_return_address(0)); + attrs, __builtin_return_address(0)); } static void *arm_coherent_dma_alloc(struct device *dev, size_t size, @@ -674,7 +687,7 @@ static void *arm_coherent_dma_alloc(struct device *dev, size_t size, return memory; return __dma_alloc(dev, size, handle, gfp, prot, true, - __builtin_return_address(0)); + attrs, __builtin_return_address(0)); } /* @@ -715,6 +728,7 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr, bool is_coherent) { struct page *page = pfn_to_page(dma_to_pfn(dev, handle)); + bool want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs); if (dma_release_from_coherent(dev, get_order(size), cpu_addr)) return; @@ -726,14 +740,15 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr, } else if (__free_from_pool(cpu_addr, size)) { return; } else if (!dev_get_cma_area(dev)) { - __dma_free_remap(cpu_addr, size); + if (want_vaddr) + __dma_free_remap(cpu_addr, size); __dma_free_buffer(page, size); } else { /* * Non-atomic allocations cannot be freed with IRQs disabled */ WARN_ON(irqs_disabled()); - __free_from_contiguous(dev, page, cpu_addr, size); + __free_from_contiguous(dev, page, cpu_addr, size, want_vaddr); } } @@ -1135,13 +1150,28 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, gfp |= __GFP_NOWARN | __GFP_HIGHMEM; while (count) { - int j, order = __fls(count); + int j, order; + + for (order = __fls(count); order > 0; --order) { + /* + * We do not want OOM killer to be invoked as long + * as we can fall back to single pages, so we force + * __GFP_NORETRY for orders higher than zero. + */ + pages[i] = alloc_pages(gfp | __GFP_NORETRY, order); + if (pages[i]) + break; + } - pages[i] = alloc_pages(gfp, order); - while (!pages[i] && order) - pages[i] = alloc_pages(gfp, --order); - if (!pages[i]) - goto error; + if (!pages[i]) { + /* + * Fall back to single page allocation. + * Might invoke OOM killer as last resort. + */ + pages[i] = alloc_pages(gfp, 0); + if (!pages[i]) + goto error; + } if (order) { split_page(pages[i], order); @@ -1206,7 +1236,7 @@ __iommu_alloc_remap(struct page **pages, size_t size, gfp_t gfp, pgprot_t prot, static dma_addr_t __iommu_create_mapping(struct device *dev, struct page **pages, size_t size) { - struct dma_iommu_mapping *mapping = dev->archdata.mapping; + struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT; dma_addr_t dma_addr, iova; int i, ret = DMA_ERROR_CODE; @@ -1242,7 +1272,7 @@ fail: static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t size) { - struct dma_iommu_mapping *mapping = dev->archdata.mapping; + struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); /* * add optional in-page offset from iova to size and align @@ -1457,7 +1487,7 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg, enum dma_data_direction dir, struct dma_attrs *attrs, bool is_coherent) { - struct dma_iommu_mapping *mapping = dev->archdata.mapping; + struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); dma_addr_t iova, iova_base; int ret = 0; unsigned int count; @@ -1678,7 +1708,7 @@ static dma_addr_t arm_coherent_iommu_map_page(struct device *dev, struct page *p unsigned long offset, size_t size, enum dma_data_direction dir, struct dma_attrs *attrs) { - struct dma_iommu_mapping *mapping = dev->archdata.mapping; + struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); dma_addr_t dma_addr; int ret, prot, len = PAGE_ALIGN(size + offset); @@ -1731,7 +1761,7 @@ static void arm_coherent_iommu_unmap_page(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir, struct dma_attrs *attrs) { - struct dma_iommu_mapping *mapping = dev->archdata.mapping; + struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); dma_addr_t iova = handle & PAGE_MASK; int offset = handle & ~PAGE_MASK; int len = PAGE_ALIGN(size + offset); @@ -1756,7 +1786,7 @@ static void arm_iommu_unmap_page(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir, struct dma_attrs *attrs) { - struct dma_iommu_mapping *mapping = dev->archdata.mapping; + struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); dma_addr_t iova = handle & PAGE_MASK; struct page *page = phys_to_page(iommu_iova_to_phys(mapping->domain, iova)); int offset = handle & ~PAGE_MASK; @@ -1775,7 +1805,7 @@ static void arm_iommu_unmap_page(struct device *dev, dma_addr_t handle, static void arm_iommu_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) { - struct dma_iommu_mapping *mapping = dev->archdata.mapping; + struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); dma_addr_t iova = handle & PAGE_MASK; struct page *page = phys_to_page(iommu_iova_to_phys(mapping->domain, iova)); unsigned int offset = handle & ~PAGE_MASK; @@ -1789,7 +1819,7 @@ static void arm_iommu_sync_single_for_cpu(struct device *dev, static void arm_iommu_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) { - struct dma_iommu_mapping *mapping = dev->archdata.mapping; + struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); dma_addr_t iova = handle & PAGE_MASK; struct page *page = phys_to_page(iommu_iova_to_phys(mapping->domain, iova)); unsigned int offset = handle & ~PAGE_MASK; @@ -1950,7 +1980,7 @@ static int __arm_iommu_attach_device(struct device *dev, return err; kref_get(&mapping->kref); - dev->archdata.mapping = mapping; + to_dma_iommu_mapping(dev) = mapping; pr_debug("Attached IOMMU controller to %s device.\n", dev_name(dev)); return 0; @@ -1995,7 +2025,7 @@ static void __arm_iommu_detach_device(struct device *dev) iommu_detach_device(mapping->domain, dev); kref_put(&mapping->kref, release_iommu_mapping); - dev->archdata.mapping = NULL; + to_dma_iommu_mapping(dev) = NULL; pr_debug("Detached IOMMU controller from %s device.\n", dev_name(dev)); } @@ -2027,6 +2057,13 @@ static bool arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size, if (!iommu) return false; + /* + * currently arm_iommu_create_mapping() takes a max of size_t + * for size param. So check this limit for now. + */ + if (size > SIZE_MAX) + return false; + mapping = arm_iommu_create_mapping(dev->bus, dma_base, size); if (IS_ERR(mapping)) { pr_warn("Failed to create %llu-byte IOMMU mapping for device %s\n", @@ -2046,7 +2083,7 @@ static bool arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size, static void arm_teardown_iommu_dma_ops(struct device *dev) { - struct dma_iommu_mapping *mapping = dev->archdata.mapping; + struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); if (!mapping) return; diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index a982dc3190df..6333d9c17875 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -552,6 +552,7 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) pr_alert("Unhandled fault: %s (0x%03x) at 0x%08lx\n", inf->name, fsr, addr); + show_pte(current->mm, addr); info.si_signo = inf->sig; info.si_errno = 0; diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 1609b022a72f..be92fa0f2f35 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -86,55 +86,6 @@ static int __init parse_tag_initrd2(const struct tag *tag) __tagtable(ATAG_INITRD2, parse_tag_initrd2); -/* - * This keeps memory configuration data used by a couple memory - * initialization functions, as well as show_mem() for the skipping - * of holes in the memory map. It is populated by arm_add_memory(). - */ -void show_mem(unsigned int filter) -{ - int free = 0, total = 0, reserved = 0; - int shared = 0, cached = 0, slab = 0; - struct memblock_region *reg; - - printk("Mem-info:\n"); - show_free_areas(filter); - - for_each_memblock (memory, reg) { - unsigned int pfn1, pfn2; - struct page *page, *end; - - pfn1 = memblock_region_memory_base_pfn(reg); - pfn2 = memblock_region_memory_end_pfn(reg); - - page = pfn_to_page(pfn1); - end = pfn_to_page(pfn2 - 1) + 1; - - do { - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (PageSlab(page)) - slab++; - else if (!page_count(page)) - free++; - else - shared += page_count(page) - 1; - pfn1++; - page = pfn_to_page(pfn1); - } while (pfn1 < pfn2); - } - - printk("%d pages of RAM\n", total); - printk("%d free pages\n", free); - printk("%d reserved pages\n", reserved); - printk("%d slab pages\n", slab); - printk("%d pages shared\n", shared); - printk("%d pages swap cached\n", cached); -} - static void __init find_limits(unsigned long *min, unsigned long *max_low, unsigned long *max_high) { @@ -335,6 +286,9 @@ void __init bootmem_init(void) find_limits(&min, &max_low, &max_high); + early_memtest((phys_addr_t)min << PAGE_SHIFT, + (phys_addr_t)max_low << PAGE_SHIFT); + /* * Sparsemem tries to allocate bootmem in memory_present(), * so must be done after the fixed reservations diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 5e85ed371364..407dc786583a 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -169,14 +169,22 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, return addr; } +unsigned long arch_mmap_rnd(void) +{ + unsigned long rnd; + + /* 8 bits of randomness in 20 address space bits */ + rnd = (unsigned long)get_random_int() % (1 << 8); + + return rnd << PAGE_SHIFT; +} + void arch_pick_mmap_layout(struct mm_struct *mm) { unsigned long random_factor = 0UL; - /* 8 bits of randomness in 20 address space bits */ - if ((current->flags & PF_RANDOMIZE) && - !(current->personality & ADDR_NO_RANDOMIZE)) - random_factor = (get_random_int() % (1 << 8)) << PAGE_SHIFT; + if (current->flags & PF_RANDOMIZE) + random_factor = arch_mmap_rnd(); if (mmap_is_legacy()) { mm->mmap_base = TASK_UNMAPPED_BASE + random_factor; diff --git a/arch/arm/mm/pageattr.c b/arch/arm/mm/pageattr.c index 004e35cdcfff..cf30daff8932 100644 --- a/arch/arm/mm/pageattr.c +++ b/arch/arm/mm/pageattr.c @@ -49,7 +49,10 @@ static int change_memory_common(unsigned long addr, int numpages, WARN_ON_ONCE(1); } - if (!is_module_address(start) || !is_module_address(end - 1)) + if (start < MODULES_VADDR || start >= MODULES_END) + return -EINVAL; + + if (end < MODULES_VADDR || start >= MODULES_END) return -EINVAL; data.set_mask = set_mask; diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 86ee5d47ce3c..aa0519eed698 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -507,7 +507,7 @@ cpu_arm1020_name: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .type __arm1020_proc_info,#object __arm1020_proc_info: @@ -519,7 +519,7 @@ __arm1020_proc_info: .long PMD_TYPE_SECT | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __arm1020_setup + initfn __arm1020_setup, __arm1020_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index a6331d78601f..bff4c7f70fd6 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -465,7 +465,7 @@ arm1020e_crval: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .type __arm1020e_proc_info,#object __arm1020e_proc_info: @@ -479,7 +479,7 @@ __arm1020e_proc_info: PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __arm1020e_setup + initfn __arm1020e_setup, __arm1020e_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_EDSP diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index a126b7a59928..dbb2413fe04d 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -448,7 +448,7 @@ arm1022_crval: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .type __arm1022_proc_info,#object __arm1022_proc_info: @@ -462,7 +462,7 @@ __arm1022_proc_info: PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __arm1022_setup + initfn __arm1022_setup, __arm1022_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_EDSP diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index fc294067e977..0b37b2cef9d3 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -442,7 +442,7 @@ arm1026_crval: string cpu_arm1026_name, "ARM1026EJ-S" .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .type __arm1026_proc_info,#object __arm1026_proc_info: @@ -456,7 +456,7 @@ __arm1026_proc_info: PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __arm1026_setup + initfn __arm1026_setup, __arm1026_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 2baa66b3ac9b..3651cd70e418 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -186,7 +186,7 @@ arm720_crval: * See <asm/procinfo.h> for a definition of this structure. */ - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .macro arm720_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cpu_flush:req .type __\name\()_proc_info,#object @@ -203,7 +203,7 @@ __\name\()_proc_info: PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b \cpu_flush @ cpu_flush + initfn \cpu_flush, __\name\()_proc_info @ cpu_flush .long cpu_arch_name @ arch_name .long cpu_elf_name @ elf_name .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB @ elf_hwcap diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index ac1ea6b3bce4..024fb7732407 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -132,14 +132,14 @@ __arm740_setup: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .type __arm740_proc_info,#object __arm740_proc_info: .long 0x41807400 .long 0xfffffff0 .long 0 .long 0 - b __arm740_setup + initfn __arm740_setup, __arm740_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_26BIT diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index bf6ba4bc30ff..25472d94426d 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -76,7 +76,7 @@ __arm7tdmi_setup: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .macro arm7tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, \ extra_hwcaps=0 @@ -86,7 +86,7 @@ __\name\()_proc_info: .long \cpu_mask .long 0 .long 0 - b __arm7tdmi_setup + initfn __arm7tdmi_setup, __\name\()_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_26BIT | ( \extra_hwcaps ) diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 22bf8dde4f84..7a14bd4414c9 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -448,7 +448,7 @@ arm920_crval: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .type __arm920_proc_info,#object __arm920_proc_info: @@ -464,7 +464,7 @@ __arm920_proc_info: PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __arm920_setup + initfn __arm920_setup, __arm920_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 0c6d5ac5a6d4..edccfcdcd551 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -426,7 +426,7 @@ arm922_crval: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .type __arm922_proc_info,#object __arm922_proc_info: @@ -442,7 +442,7 @@ __arm922_proc_info: PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __arm922_setup + initfn __arm922_setup, __arm922_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index c32d073282ea..ede8c54ab4aa 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -494,7 +494,7 @@ arm925_crval: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .macro arm925_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache .type __\name\()_proc_info,#object @@ -510,7 +510,7 @@ __\name\()_proc_info: PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __arm925_setup + initfn __arm925_setup, __\name\()_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 252b2503038d..fb827c633693 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -474,7 +474,7 @@ arm926_crval: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .type __arm926_proc_info,#object __arm926_proc_info: @@ -490,7 +490,7 @@ __arm926_proc_info: PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __arm926_setup + initfn __arm926_setup, __arm926_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index e5212d489377..ee5b66f847c4 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -297,26 +297,16 @@ __arm940_setup: mcr p15, 0, r0, c6, c0, 1 ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM - ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB) - mov r2, #10 @ 11 is the minimum (4KB) -1: add r2, r2, #1 @ area size *= 2 - mov r1, r1, lsr #1 - bne 1b @ count not zero r-shift - orr r0, r0, r2, lsl #1 @ the area register value - orr r0, r0, #1 @ set enable bit - mcr p15, 0, r0, c6, c1, 0 @ set area 1, RAM - mcr p15, 0, r0, c6, c1, 1 + ldr r7, =CONFIG_DRAM_SIZE >> 12 @ size of RAM (must be >= 4KB) + pr_val r3, r0, r7, #1 + mcr p15, 0, r3, c6, c1, 0 @ set area 1, RAM + mcr p15, 0, r3, c6, c1, 1 ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH - ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB) - mov r2, #10 @ 11 is the minimum (4KB) -1: add r2, r2, #1 @ area size *= 2 - mov r1, r1, lsr #1 - bne 1b @ count not zero r-shift - orr r0, r0, r2, lsl #1 @ the area register value - orr r0, r0, #1 @ set enable bit - mcr p15, 0, r0, c6, c2, 0 @ set area 2, ROM/FLASH - mcr p15, 0, r0, c6, c2, 1 + ldr r7, =CONFIG_FLASH_SIZE @ size of FLASH (must be >= 4KB) + pr_val r3, r0, r6, #1 + mcr p15, 0, r3, c6, c2, 0 @ set area 2, ROM/FLASH + mcr p15, 0, r3, c6, c2, 1 mov r0, #0x06 mcr p15, 0, r0, c2, c0, 0 @ Region 1&2 cacheable @@ -354,14 +344,14 @@ __arm940_setup: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .type __arm940_proc_info,#object __arm940_proc_info: .long 0x41009400 .long 0xff00fff0 .long 0 - b __arm940_setup + initfn __arm940_setup, __arm940_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index b3dd9b2d0b8e..7361837edc31 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -343,24 +343,14 @@ __arm946_setup: mcr p15, 0, r0, c6, c0, 0 @ set region 0, default ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM - ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB) - mov r2, #10 @ 11 is the minimum (4KB) -1: add r2, r2, #1 @ area size *= 2 - mov r1, r1, lsr #1 - bne 1b @ count not zero r-shift - orr r0, r0, r2, lsl #1 @ the region register value - orr r0, r0, #1 @ set enable bit - mcr p15, 0, r0, c6, c1, 0 @ set region 1, RAM + ldr r7, =CONFIG_DRAM_SIZE @ size of RAM (must be >= 4KB) + pr_val r3, r0, r7, #1 + mcr p15, 0, r3, c6, c1, 0 ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH - ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB) - mov r2, #10 @ 11 is the minimum (4KB) -1: add r2, r2, #1 @ area size *= 2 - mov r1, r1, lsr #1 - bne 1b @ count not zero r-shift - orr r0, r0, r2, lsl #1 @ the region register value - orr r0, r0, #1 @ set enable bit - mcr p15, 0, r0, c6, c2, 0 @ set region 2, ROM/FLASH + ldr r7, =CONFIG_FLASH_SIZE @ size of FLASH (must be >= 4KB) + pr_val r3, r0, r7, #1 + mcr p15, 0, r3, c6, c2, 0 mov r0, #0x06 mcr p15, 0, r0, c2, c0, 0 @ region 1,2 d-cacheable @@ -409,14 +399,14 @@ __arm946_setup: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .type __arm946_proc_info,#object __arm946_proc_info: .long 0x41009460 .long 0xff00fff0 .long 0 .long 0 - b __arm946_setup + initfn __arm946_setup, __arm946_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 8227322bbb8f..7fac8c612134 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -70,7 +70,7 @@ __arm9tdmi_setup: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .macro arm9tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req .type __\name\()_proc_info, #object @@ -79,7 +79,7 @@ __\name\()_proc_info: .long \cpu_mask .long 0 .long 0 - b __arm9tdmi_setup + initfn __arm9tdmi_setup, __\name\()_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index c494886892ba..4001b73af4ee 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -190,7 +190,7 @@ fa526_cr1_set: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .type __fa526_proc_info,#object __fa526_proc_info: @@ -206,7 +206,7 @@ __fa526_proc_info: PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __fa526_setup + initfn __fa526_setup, __fa526_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_HALF diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index 03a1b75f2e16..e494d6d6acbe 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -584,7 +584,7 @@ feroceon_crval: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .macro feroceon_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache:req .type __\name\()_proc_info,#object @@ -601,7 +601,8 @@ __\name\()_proc_info: PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __feroceon_setup + initfn __feroceon_setup, __\name\()_proc_info + .long __feroceon_setup .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index 082b9f2f7e90..c671f345266a 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -331,3 +331,31 @@ ENTRY(\name\()_tlb_fns) .globl \x .equ \x, \y .endm + +.macro initfn, func, base + .long \func - \base +.endm + + /* + * Macro to calculate the log2 size for the protection region + * registers. This calculates rd = log2(size) - 1. tmp must + * not be the same register as rd. + */ +.macro pr_sz, rd, size, tmp + mov \tmp, \size, lsr #12 + mov \rd, #11 +1: movs \tmp, \tmp, lsr #1 + addne \rd, \rd, #1 + bne 1b +.endm + + /* + * Macro to generate a protection region register value + * given a pre-masked address, size, and enable bit. + * Corrupts size. + */ +.macro pr_val, dest, addr, size, enable + pr_sz \dest, \size, \size @ calculate log2(size) - 1 + orr \dest, \addr, \dest, lsl #1 @ mask in the region size + orr \dest, \dest, \enable +.endm diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 53d393455f13..d65edf717bf7 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -427,7 +427,7 @@ mohawk_crval: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .type __88sv331x_proc_info,#object __88sv331x_proc_info: @@ -443,7 +443,7 @@ __88sv331x_proc_info: PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __mohawk_setup + initfn __mohawk_setup, __88sv331x_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 8008a0461cf5..ee2ce496239f 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -199,7 +199,7 @@ sa110_crval: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .type __sa110_proc_info,#object __sa110_proc_info: @@ -213,7 +213,7 @@ __sa110_proc_info: .long PMD_TYPE_SECT | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __sa110_setup + initfn __sa110_setup, __sa110_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 89f97ac648a9..222d5836f666 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -242,7 +242,7 @@ sa1100_crval: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .macro sa1100_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req .type __\name\()_proc_info,#object @@ -257,7 +257,7 @@ __\name\()_proc_info: .long PMD_TYPE_SECT | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __sa1100_setup + initfn __sa1100_setup, __\name\()_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index d0390f4b3f18..06d890a2342b 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -264,7 +264,7 @@ v6_crval: string cpu_elf_name, "v6" .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc /* * Match any ARMv6 processor core. @@ -287,7 +287,7 @@ __v6_proc_info: PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __v6_setup + initfn __v6_setup, __v6_proc_info .long cpu_arch_name .long cpu_elf_name /* See also feat_v6_fixup() for HWCAP_TLS */ diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index ed448d8a596b..10405b8d31af 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -37,15 +37,18 @@ * It is assumed that: * - we are not using split page tables */ -ENTRY(cpu_v7_switch_mm) +ENTRY(cpu_ca8_switch_mm) #ifdef CONFIG_MMU mov r2, #0 - mmid r1, r1 @ get mm->context.id - ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP) - ALT_UP(orr r0, r0, #TTB_FLAGS_UP) #ifdef CONFIG_ARM_ERRATA_430973 mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB #endif +#endif +ENTRY(cpu_v7_switch_mm) +#ifdef CONFIG_MMU + mmid r1, r1 @ get mm->context.id + ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP) + ALT_UP(orr r0, r0, #TTB_FLAGS_UP) #ifdef CONFIG_PID_IN_CONTEXTIDR mrc p15, 0, r2, c13, c0, 1 @ read current context ID lsr r2, r2, #8 @ extract the PID @@ -61,6 +64,7 @@ ENTRY(cpu_v7_switch_mm) #endif bx lr ENDPROC(cpu_v7_switch_mm) +ENDPROC(cpu_ca8_switch_mm) /* * cpu_v7_set_pte_ext(ptep, pte) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 8b4ee5e81c14..3d1054f11a8a 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -153,6 +153,21 @@ ENDPROC(cpu_v7_do_resume) #endif /* + * Cortex-A8 + */ + globl_equ cpu_ca8_proc_init, cpu_v7_proc_init + globl_equ cpu_ca8_proc_fin, cpu_v7_proc_fin + globl_equ cpu_ca8_reset, cpu_v7_reset + globl_equ cpu_ca8_do_idle, cpu_v7_do_idle + globl_equ cpu_ca8_dcache_clean_area, cpu_v7_dcache_clean_area + globl_equ cpu_ca8_set_pte_ext, cpu_v7_set_pte_ext + globl_equ cpu_ca8_suspend_size, cpu_v7_suspend_size +#ifdef CONFIG_ARM_CPU_SUSPEND + globl_equ cpu_ca8_do_suspend, cpu_v7_do_suspend + globl_equ cpu_ca8_do_resume, cpu_v7_do_resume +#endif + +/* * Cortex-A9 processor functions */ globl_equ cpu_ca9mp_proc_init, cpu_v7_proc_init @@ -451,7 +466,10 @@ __v7_setup_stack: @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) define_processor_functions v7, dabort=v7_early_abort, pabort=v7_pabort, suspend=1 +#ifndef CONFIG_ARM_LPAE + define_processor_functions ca8, dabort=v7_early_abort, pabort=v7_pabort, suspend=1 define_processor_functions ca9mp, dabort=v7_early_abort, pabort=v7_pabort, suspend=1 +#endif #ifdef CONFIG_CPU_PJ4B define_processor_functions pj4b, dabort=v7_early_abort, pabort=v7_pabort, suspend=1 #endif @@ -462,19 +480,19 @@ __v7_setup_stack: string cpu_elf_name, "v7" .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc /* * Standard v7 proc info content */ -.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0, proc_fns = v7_processor_functions +.macro __v7_proc name, initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0, proc_fns = v7_processor_functions ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \ PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags) ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \ PMD_SECT_AF | PMD_FLAGS_UP | \mm_mmuflags) .long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ | PMD_SECT_AF | \io_mmuflags - W(b) \initfunc + initfn \initfunc, \name .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_FAST_MULT | \ @@ -494,7 +512,7 @@ __v7_setup_stack: __v7_ca5mp_proc_info: .long 0x410fc050 .long 0xff0ffff0 - __v7_proc __v7_ca5mp_setup + __v7_proc __v7_ca5mp_proc_info, __v7_ca5mp_setup .size __v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info /* @@ -504,9 +522,19 @@ __v7_ca5mp_proc_info: __v7_ca9mp_proc_info: .long 0x410fc090 .long 0xff0ffff0 - __v7_proc __v7_ca9mp_setup, proc_fns = ca9mp_processor_functions + __v7_proc __v7_ca9mp_proc_info, __v7_ca9mp_setup, proc_fns = ca9mp_processor_functions .size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info + /* + * ARM Ltd. Cortex A8 processor. + */ + .type __v7_ca8_proc_info, #object +__v7_ca8_proc_info: + .long 0x410fc080 + .long 0xff0ffff0 + __v7_proc __v7_ca8_proc_info, __v7_setup, proc_fns = ca8_processor_functions + .size __v7_ca8_proc_info, . - __v7_ca8_proc_info + #endif /* CONFIG_ARM_LPAE */ /* @@ -517,7 +545,7 @@ __v7_ca9mp_proc_info: __v7_pj4b_proc_info: .long 0x560f5800 .long 0xff0fff00 - __v7_proc __v7_pj4b_setup, proc_fns = pj4b_processor_functions + __v7_proc __v7_pj4b_proc_info, __v7_pj4b_setup, proc_fns = pj4b_processor_functions .size __v7_pj4b_proc_info, . - __v7_pj4b_proc_info #endif @@ -528,7 +556,7 @@ __v7_pj4b_proc_info: __v7_cr7mp_proc_info: .long 0x410fc170 .long 0xff0ffff0 - __v7_proc __v7_cr7mp_setup + __v7_proc __v7_cr7mp_proc_info, __v7_cr7mp_setup .size __v7_cr7mp_proc_info, . - __v7_cr7mp_proc_info /* @@ -538,7 +566,7 @@ __v7_cr7mp_proc_info: __v7_ca7mp_proc_info: .long 0x410fc070 .long 0xff0ffff0 - __v7_proc __v7_ca7mp_setup + __v7_proc __v7_ca7mp_proc_info, __v7_ca7mp_setup .size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info /* @@ -548,7 +576,7 @@ __v7_ca7mp_proc_info: __v7_ca12mp_proc_info: .long 0x410fc0d0 .long 0xff0ffff0 - __v7_proc __v7_ca12mp_setup + __v7_proc __v7_ca12mp_proc_info, __v7_ca12mp_setup .size __v7_ca12mp_proc_info, . - __v7_ca12mp_proc_info /* @@ -558,7 +586,7 @@ __v7_ca12mp_proc_info: __v7_ca15mp_proc_info: .long 0x410fc0f0 .long 0xff0ffff0 - __v7_proc __v7_ca15mp_setup + __v7_proc __v7_ca15mp_proc_info, __v7_ca15mp_setup .size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info /* @@ -568,7 +596,7 @@ __v7_ca15mp_proc_info: __v7_b15mp_proc_info: .long 0x420f00f0 .long 0xff0ffff0 - __v7_proc __v7_b15mp_setup + __v7_proc __v7_b15mp_proc_info, __v7_b15mp_setup .size __v7_b15mp_proc_info, . - __v7_b15mp_proc_info /* @@ -578,7 +606,7 @@ __v7_b15mp_proc_info: __v7_ca17mp_proc_info: .long 0x410fc0e0 .long 0xff0ffff0 - __v7_proc __v7_ca17mp_setup + __v7_proc __v7_ca17mp_proc_info, __v7_ca17mp_setup .size __v7_ca17mp_proc_info, . - __v7_ca17mp_proc_info /* @@ -594,7 +622,7 @@ __krait_proc_info: * do support them. They also don't indicate support for fused multiply * instructions even though they actually do support them. */ - __v7_proc __v7_setup, hwcaps = HWCAP_IDIV | HWCAP_VFPv4 + __v7_proc __krait_proc_info, __v7_setup, hwcaps = HWCAP_IDIV | HWCAP_VFPv4 .size __krait_proc_info, . - __krait_proc_info /* @@ -604,5 +632,5 @@ __krait_proc_info: __v7_proc_info: .long 0x000f0000 @ Required ID value .long 0x000f0000 @ Mask for ID - __v7_proc __v7_setup + __v7_proc __v7_proc_info, __v7_setup .size __v7_proc_info, . - __v7_proc_info diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S index d1e68b553d3b..e08e1f2bab76 100644 --- a/arch/arm/mm/proc-v7m.S +++ b/arch/arm/mm/proc-v7m.S @@ -135,7 +135,7 @@ __v7m_setup_stack_top: string cpu_elf_name "v7m" string cpu_v7m_name "ARMv7-M" - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc /* * Match any ARMv7-M processor core. @@ -146,7 +146,7 @@ __v7m_proc_info: .long 0x000f0000 @ Mask for ID .long 0 @ proc_info_list.__cpu_mm_mmu_flags .long 0 @ proc_info_list.__cpu_io_mmu_flags - b __v7m_setup @ proc_info_list.__cpu_flush + initfn __v7m_setup, __v7m_proc_info @ proc_info_list.__cpu_flush .long cpu_arch_name .long cpu_elf_name .long HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index f8acdfece036..293dcc2c441f 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -499,7 +499,7 @@ xsc3_crval: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .macro xsc3_proc_info name:req, cpu_val:req, cpu_mask:req .type __\name\()_proc_info,#object @@ -514,7 +514,7 @@ __\name\()_proc_info: .long PMD_TYPE_SECT | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __xsc3_setup + initfn __xsc3_setup, __\name\()_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index afa2b3c4df4a..b6bbfdb6dfdc 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -612,7 +612,7 @@ xscale_crval: .align - .section ".proc.info.init", #alloc, #execinstr + .section ".proc.info.init", #alloc .macro xscale_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache .type __\name\()_proc_info,#object @@ -627,7 +627,7 @@ __\name\()_proc_info: .long PMD_TYPE_SECT | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __xscale_setup + initfn __xscale_setup, __\name\()_proc_info .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP diff --git a/arch/arm/nwfpe/entry.S b/arch/arm/nwfpe/entry.S index 5d65be1f1e8a..71df43547659 100644 --- a/arch/arm/nwfpe/entry.S +++ b/arch/arm/nwfpe/entry.S @@ -113,7 +113,7 @@ next: @ to fault. Emit the appropriate exception gunk to fix things up. @ ??? For some reason, faults can happen at .Lx2 even with a @ plain LDR instruction. Weird, but it seems harmless. - .pushsection .fixup,"ax" + .pushsection .text.fixup,"ax" .align 2 .Lfix: ret r9 @ let the user eat segfaults .popsection diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 61b4d705c267..2438b96004c1 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -44,24 +44,20 @@ static u64 notrace omap_32k_read_sched_clock(void) } /** - * omap_read_persistent_clock - Return time from a persistent clock. + * omap_read_persistent_clock64 - Return time from a persistent clock. * * Reads the time from a source which isn't disabled during PM, the * 32k sync timer. Convert the cycles elapsed since last read into - * nsecs and adds to a monotonically increasing timespec. + * nsecs and adds to a monotonically increasing timespec64. */ -static struct timespec persistent_ts; +static struct timespec64 persistent_ts; static cycles_t cycles; static unsigned int persistent_mult, persistent_shift; -static DEFINE_SPINLOCK(read_persistent_clock_lock); -static void omap_read_persistent_clock(struct timespec *ts) +static void omap_read_persistent_clock64(struct timespec64 *ts) { unsigned long long nsecs; cycles_t last_cycles; - unsigned long flags; - - spin_lock_irqsave(&read_persistent_clock_lock, flags); last_cycles = cycles; cycles = sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0; @@ -69,11 +65,9 @@ static void omap_read_persistent_clock(struct timespec *ts) nsecs = clocksource_cyc2ns(cycles - last_cycles, persistent_mult, persistent_shift); - timespec_add_ns(&persistent_ts, nsecs); + timespec64_add_ns(&persistent_ts, nsecs); *ts = persistent_ts; - - spin_unlock_irqrestore(&read_persistent_clock_lock, flags); } /** @@ -103,7 +97,7 @@ int __init omap_init_clocksource_32k(void __iomem *vbase) /* * 120000 rough estimate from the calculations in - * __clocksource_updatefreq_scale. + * __clocksource_update_freq_scale. */ clocks_calc_mult_shift(&persistent_mult, &persistent_shift, 32768, NSEC_PER_SEC, 120000); @@ -116,7 +110,7 @@ int __init omap_init_clocksource_32k(void __iomem *vbase) } sched_clock_register(omap_32k_read_sched_clock, 32, 32768); - register_persistent_clock(NULL, omap_read_persistent_clock); + register_persistent_clock(NULL, omap_read_persistent_clock64); pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n"); return 0; diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index db10169a08de..8ca94d379bc3 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -799,6 +799,7 @@ static int omap_dm_timer_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; const struct of_device_id *match; const struct dmtimer_platform_data *pdata; + int ret; match = of_match_device(of_match_ptr(omap_timer_match), dev); pdata = match ? match->data : dev->platform_data; @@ -860,7 +861,12 @@ static int omap_dm_timer_probe(struct platform_device *pdev) } if (!timer->reserved) { - pm_runtime_get_sync(dev); + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + dev_err(dev, "%s: pm_runtime_get_sync failed!\n", + __func__); + goto err_get_sync; + } __omap_dm_timer_init_regs(timer); pm_runtime_put(dev); } @@ -873,6 +879,11 @@ static int omap_dm_timer_probe(struct platform_device *pdev) dev_dbg(dev, "Device Probed.\n"); return 0; + +err_get_sync: + pm_runtime_put_noidle(dev); + pm_runtime_disable(dev); + return ret; } /** @@ -899,6 +910,8 @@ static int omap_dm_timer_remove(struct platform_device *pdev) } spin_unlock_irqrestore(&dm_timer_lock, flags); + pm_runtime_disable(&pdev->dev); + return ret; } diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c index 054fc5a1a11c..d92f07f6ecfb 100644 --- a/arch/arm/plat-pxa/dma.c +++ b/arch/arm/plat-pxa/dma.c @@ -51,19 +51,19 @@ static struct dentry *dbgfs_root, *dbgfs_state, **dbgfs_chan; static int dbg_show_requester_chan(struct seq_file *s, void *p) { - int pos = 0; int chan = (int)s->private; int i; u32 drcmr; - pos += seq_printf(s, "DMA channel %d requesters list :\n", chan); + seq_printf(s, "DMA channel %d requesters list :\n", chan); for (i = 0; i < DMA_MAX_REQUESTERS; i++) { drcmr = DRCMR(i); if ((drcmr & DRCMR_CHLNUM) == chan) - pos += seq_printf(s, "\tRequester %d (MAPVLD=%d)\n", i, - !!(drcmr & DRCMR_MAPVLD)); + seq_printf(s, "\tRequester %d (MAPVLD=%d)\n", + i, !!(drcmr & DRCMR_MAPVLD)); } - return pos; + + return 0; } static inline int dbg_burst_from_dcmd(u32 dcmd) @@ -83,7 +83,6 @@ static int is_phys_valid(unsigned long addr) static int dbg_show_descriptors(struct seq_file *s, void *p) { - int pos = 0; int chan = (int)s->private; int i, max_show = 20, burst, width; u32 dcmd; @@ -94,44 +93,43 @@ static int dbg_show_descriptors(struct seq_file *s, void *p) spin_lock_irqsave(&dma_channels[chan].lock, flags); phys_desc = DDADR(chan); - pos += seq_printf(s, "DMA channel %d descriptors :\n", chan); - pos += seq_printf(s, "[%03d] First descriptor unknown\n", 0); + seq_printf(s, "DMA channel %d descriptors :\n", chan); + seq_printf(s, "[%03d] First descriptor unknown\n", 0); for (i = 1; i < max_show && is_phys_valid(phys_desc); i++) { desc = phys_to_virt(phys_desc); dcmd = desc->dcmd; burst = dbg_burst_from_dcmd(dcmd); width = (1 << ((dcmd >> 14) & 0x3)) >> 1; - pos += seq_printf(s, "[%03d] Desc at %08lx(virt %p)\n", - i, phys_desc, desc); - pos += seq_printf(s, "\tDDADR = %08x\n", desc->ddadr); - pos += seq_printf(s, "\tDSADR = %08x\n", desc->dsadr); - pos += seq_printf(s, "\tDTADR = %08x\n", desc->dtadr); - pos += seq_printf(s, "\tDCMD = %08x (%s%s%s%s%s%s%sburst=%d" - " width=%d len=%d)\n", - dcmd, - DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR), - DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG), - DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN), - DCMD_STR(ENDIAN), burst, width, - dcmd & DCMD_LENGTH); + seq_printf(s, "[%03d] Desc at %08lx(virt %p)\n", + i, phys_desc, desc); + seq_printf(s, "\tDDADR = %08x\n", desc->ddadr); + seq_printf(s, "\tDSADR = %08x\n", desc->dsadr); + seq_printf(s, "\tDTADR = %08x\n", desc->dtadr); + seq_printf(s, "\tDCMD = %08x (%s%s%s%s%s%s%sburst=%d width=%d len=%d)\n", + dcmd, + DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR), + DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG), + DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN), + DCMD_STR(ENDIAN), burst, width, + dcmd & DCMD_LENGTH); phys_desc = desc->ddadr; } if (i == max_show) - pos += seq_printf(s, "[%03d] Desc at %08lx ... max display reached\n", - i, phys_desc); + seq_printf(s, "[%03d] Desc at %08lx ... max display reached\n", + i, phys_desc); else - pos += seq_printf(s, "[%03d] Desc at %08lx is %s\n", - i, phys_desc, phys_desc == DDADR_STOP ? - "DDADR_STOP" : "invalid"); + seq_printf(s, "[%03d] Desc at %08lx is %s\n", + i, phys_desc, phys_desc == DDADR_STOP ? + "DDADR_STOP" : "invalid"); spin_unlock_irqrestore(&dma_channels[chan].lock, flags); - return pos; + + return 0; } static int dbg_show_chan_state(struct seq_file *s, void *p) { - int pos = 0; int chan = (int)s->private; u32 dcsr, dcmd; int burst, width; @@ -142,42 +140,39 @@ static int dbg_show_chan_state(struct seq_file *s, void *p) burst = dbg_burst_from_dcmd(dcmd); width = (1 << ((dcmd >> 14) & 0x3)) >> 1; - pos += seq_printf(s, "DMA channel %d\n", chan); - pos += seq_printf(s, "\tPriority : %s\n", - str_prio[dma_channels[chan].prio]); - pos += seq_printf(s, "\tUnaligned transfer bit: %s\n", - DALGN & (1 << chan) ? "yes" : "no"); - pos += seq_printf(s, "\tDCSR = %08x (%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n", - dcsr, DCSR_STR(RUN), DCSR_STR(NODESC), - DCSR_STR(STOPIRQEN), DCSR_STR(EORIRQEN), - DCSR_STR(EORJMPEN), DCSR_STR(EORSTOPEN), - DCSR_STR(SETCMPST), DCSR_STR(CLRCMPST), - DCSR_STR(CMPST), DCSR_STR(EORINTR), DCSR_STR(REQPEND), - DCSR_STR(STOPSTATE), DCSR_STR(ENDINTR), - DCSR_STR(STARTINTR), DCSR_STR(BUSERR)); - - pos += seq_printf(s, "\tDCMD = %08x (%s%s%s%s%s%s%sburst=%d width=%d" - " len=%d)\n", - dcmd, - DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR), - DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG), - DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN), - DCMD_STR(ENDIAN), burst, width, dcmd & DCMD_LENGTH); - pos += seq_printf(s, "\tDSADR = %08x\n", DSADR(chan)); - pos += seq_printf(s, "\tDTADR = %08x\n", DTADR(chan)); - pos += seq_printf(s, "\tDDADR = %08x\n", DDADR(chan)); - return pos; + seq_printf(s, "DMA channel %d\n", chan); + seq_printf(s, "\tPriority : %s\n", str_prio[dma_channels[chan].prio]); + seq_printf(s, "\tUnaligned transfer bit: %s\n", + DALGN & (1 << chan) ? "yes" : "no"); + seq_printf(s, "\tDCSR = %08x (%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n", + dcsr, DCSR_STR(RUN), DCSR_STR(NODESC), + DCSR_STR(STOPIRQEN), DCSR_STR(EORIRQEN), + DCSR_STR(EORJMPEN), DCSR_STR(EORSTOPEN), + DCSR_STR(SETCMPST), DCSR_STR(CLRCMPST), + DCSR_STR(CMPST), DCSR_STR(EORINTR), DCSR_STR(REQPEND), + DCSR_STR(STOPSTATE), DCSR_STR(ENDINTR), + DCSR_STR(STARTINTR), DCSR_STR(BUSERR)); + + seq_printf(s, "\tDCMD = %08x (%s%s%s%s%s%s%sburst=%d width=%d len=%d)\n", + dcmd, + DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR), + DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG), + DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN), + DCMD_STR(ENDIAN), burst, width, dcmd & DCMD_LENGTH); + seq_printf(s, "\tDSADR = %08x\n", DSADR(chan)); + seq_printf(s, "\tDTADR = %08x\n", DTADR(chan)); + seq_printf(s, "\tDDADR = %08x\n", DDADR(chan)); + + return 0; } static int dbg_show_state(struct seq_file *s, void *p) { - int pos = 0; - /* basic device status */ - pos += seq_printf(s, "DMA engine status\n"); - pos += seq_printf(s, "\tChannel number: %d\n", num_dma_channels); + seq_puts(s, "DMA engine status\n"); + seq_printf(s, "\tChannel number: %d\n", num_dma_channels); - return pos; + return 0; } #define DBGFS_FUNC_DECL(name) \ diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index e17d871b934c..7f415ce74591 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -43,7 +43,11 @@ extern unsigned long s3c_irqwake_eintmask; /* IRQ masks for IRQs allowed to go to sleep (see irq.c) */ extern unsigned long s3c_irqwake_intallow; +#ifdef CONFIG_PM_SLEEP extern unsigned long s3c_irqwake_eintallow; +#else +#define s3c_irqwake_eintallow 0 +#endif /* per-cpu sleep functions */ @@ -58,16 +62,20 @@ extern unsigned long s3c_pm_flags; extern int s3c2410_cpu_suspend(unsigned long); -#ifdef CONFIG_SAMSUNG_PM +#ifdef CONFIG_PM_SLEEP extern int s3c_irq_wake(struct irq_data *data, unsigned int state); -extern int s3c_irqext_wake(struct irq_data *data, unsigned int state); extern void s3c_cpu_resume(void); #else #define s3c_irq_wake NULL -#define s3c_irqext_wake NULL #define s3c_cpu_resume NULL #endif +#ifdef CONFIG_SAMSUNG_PM +extern int s3c_irqext_wake(struct irq_data *data, unsigned int state); +#else +#define s3c_irqext_wake NULL +#endif + #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK /** * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs diff --git a/arch/arm/plat-samsung/pm-debug.c b/arch/arm/plat-samsung/pm-debug.c index 39609601f407..64e15da33b42 100644 --- a/arch/arm/plat-samsung/pm-debug.c +++ b/arch/arm/plat-samsung/pm-debug.c @@ -23,6 +23,7 @@ #include <plat/pm-common.h> #ifdef CONFIG_SAMSUNG_ATAGS +#include <plat/pm.h> #include <mach/pm-core.h> #else static inline void s3c_pm_debug_init_uart(void) {} diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index f8c0f9797dcf..82777c649774 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -65,26 +65,6 @@ int s3c_irqext_wake(struct irq_data *data, unsigned int state) return 0; } -/* s3c2410_pm_show_resume_irqs - * - * print any IRQs asserted at resume time (ie, we woke from) -*/ -static void __maybe_unused s3c_pm_show_resume_irqs(int start, - unsigned long which, - unsigned long mask) -{ - int i; - - which &= ~mask; - - for (i = 0; i <= 31; i++) { - if (which & (1L<<i)) { - S3C_PMDBG("IRQ %d asserted at resume\n", start+i); - } - } -} - - void (*pm_cpu_prep)(void); int (*pm_cpu_sleep)(unsigned long); diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index a10297da122b..2ed1b8a922ed 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -526,7 +526,6 @@ ag5evm MACH_AG5EVM AG5EVM 3189 ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206 wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207 trimslice MACH_TRIMSLICE TRIMSLICE 3209 -mackerel MACH_MACKEREL MACKEREL 3211 kaen MACH_KAEN KAEN 3217 nokia_rm680 MACH_NOKIA_RM680 NOKIA_RM680 3220 msm8960_sim MACH_MSM8960_SIM MSM8960_SIM 3230 diff --git a/arch/arm/vdso/.gitignore b/arch/arm/vdso/.gitignore new file mode 100644 index 000000000000..6b47f6e0b032 --- /dev/null +++ b/arch/arm/vdso/.gitignore @@ -0,0 +1,3 @@ +vdso.lds +vdso.so.raw +vdsomunge diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile new file mode 100644 index 000000000000..8aa791051029 --- /dev/null +++ b/arch/arm/vdso/Makefile @@ -0,0 +1,74 @@ +hostprogs-y := vdsomunge + +obj-vdso := vgettimeofday.o datapage.o + +# Build rules +targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.so.raw vdso.lds +obj-vdso := $(addprefix $(obj)/, $(obj-vdso)) + +ccflags-y := -shared -fPIC -fno-common -fno-builtin -fno-stack-protector +ccflags-y += -nostdlib -Wl,-soname=linux-vdso.so.1 -DDISABLE_BRANCH_PROFILING +ccflags-y += -Wl,--no-undefined $(call cc-ldoption, -Wl$(comma)--hash-style=sysv) + +obj-$(CONFIG_VDSO) += vdso.o +extra-$(CONFIG_VDSO) += vdso.lds +CPPFLAGS_vdso.lds += -P -C -U$(ARCH) + +CFLAGS_REMOVE_vdso.o = -pg + +# Force -O2 to avoid libgcc dependencies +CFLAGS_REMOVE_vgettimeofday.o = -pg -Os +CFLAGS_vgettimeofday.o = -O2 + +# Disable gcov profiling for VDSO code +GCOV_PROFILE := n + +# Force dependency +$(obj)/vdso.o : $(obj)/vdso.so + +# Link rule for the .so file +$(obj)/vdso.so.raw: $(src)/vdso.lds $(obj-vdso) FORCE + $(call if_changed,vdsold) + +$(obj)/vdso.so.dbg: $(obj)/vdso.so.raw $(obj)/vdsomunge FORCE + $(call if_changed,vdsomunge) + +# Strip rule for the .so file +$(obj)/%.so: OBJCOPYFLAGS := -S +$(obj)/%.so: $(obj)/%.so.dbg FORCE + $(call if_changed,objcopy) + +# Actual build commands +quiet_cmd_vdsold = VDSO $@ + cmd_vdsold = $(CC) $(c_flags) -Wl,-T $(filter %.lds,$^) $(filter %.o,$^) \ + $(call cc-ldoption, -Wl$(comma)--build-id) \ + -Wl,-Bsymbolic -Wl,-z,max-page-size=4096 \ + -Wl,-z,common-page-size=4096 -o $@ + +quiet_cmd_vdsomunge = MUNGE $@ + cmd_vdsomunge = $(objtree)/$(obj)/vdsomunge $< $@ + +# +# Install the unstripped copy of vdso.so.dbg. If our toolchain +# supports build-id, install .build-id links as well. +# +# Cribbed from arch/x86/vdso/Makefile. +# +quiet_cmd_vdso_install = INSTALL $< +define cmd_vdso_install + cp $< "$(MODLIB)/vdso/vdso.so"; \ + if readelf -n $< | grep -q 'Build ID'; then \ + buildid=`readelf -n $< |grep 'Build ID' |sed -e 's/^.*Build ID: \(.*\)$$/\1/'`; \ + first=`echo $$buildid | cut -b-2`; \ + last=`echo $$buildid | cut -b3-`; \ + mkdir -p "$(MODLIB)/vdso/.build-id/$$first"; \ + ln -sf "../../vdso.so" "$(MODLIB)/vdso/.build-id/$$first/$$last.debug"; \ + fi +endef + +$(MODLIB)/vdso: FORCE + @mkdir -p $(MODLIB)/vdso + +PHONY += vdso_install +vdso_install: $(obj)/vdso.so.dbg $(MODLIB)/vdso FORCE + $(call cmd,vdso_install) diff --git a/arch/arm/vdso/datapage.S b/arch/arm/vdso/datapage.S new file mode 100644 index 000000000000..a2e60367931b --- /dev/null +++ b/arch/arm/vdso/datapage.S @@ -0,0 +1,15 @@ +#include <linux/linkage.h> +#include <asm/asm-offsets.h> + + .align 2 +.L_vdso_data_ptr: + .long _start - . - VDSO_DATA_SIZE + +ENTRY(__get_datapage) + .fnstart + adr r0, .L_vdso_data_ptr + ldr r1, [r0] + add r0, r0, r1 + bx lr + .fnend +ENDPROC(__get_datapage) diff --git a/arch/arm/vdso/vdso.S b/arch/arm/vdso/vdso.S new file mode 100644 index 000000000000..b2b97e3e7bab --- /dev/null +++ b/arch/arm/vdso/vdso.S @@ -0,0 +1,35 @@ +/* + * Adapted from arm64 version. + * + * Copyright (C) 2012 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * Author: Will Deacon <will.deacon@arm.com> + */ + +#include <linux/init.h> +#include <linux/linkage.h> +#include <linux/const.h> +#include <asm/page.h> + + __PAGE_ALIGNED_DATA + + .globl vdso_start, vdso_end + .balign PAGE_SIZE +vdso_start: + .incbin "arch/arm/vdso/vdso.so" + .balign PAGE_SIZE +vdso_end: + + .previous diff --git a/arch/arm/vdso/vdso.lds.S b/arch/arm/vdso/vdso.lds.S new file mode 100644 index 000000000000..89ca89f12d23 --- /dev/null +++ b/arch/arm/vdso/vdso.lds.S @@ -0,0 +1,87 @@ +/* + * Adapted from arm64 version. + * + * GNU linker script for the VDSO library. + * + * Copyright (C) 2012 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * Author: Will Deacon <will.deacon@arm.com> + * Heavily based on the vDSO linker scripts for other archs. + */ + +#include <linux/const.h> +#include <asm/page.h> +#include <asm/vdso.h> + +OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm") +OUTPUT_ARCH(arm) + +SECTIONS +{ + PROVIDE(_start = .); + + . = SIZEOF_HEADERS; + + .hash : { *(.hash) } :text + .gnu.hash : { *(.gnu.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .gnu.version : { *(.gnu.version) } + .gnu.version_d : { *(.gnu.version_d) } + .gnu.version_r : { *(.gnu.version_r) } + + .note : { *(.note.*) } :text :note + + + .eh_frame_hdr : { *(.eh_frame_hdr) } :text :eh_frame_hdr + .eh_frame : { KEEP (*(.eh_frame)) } :text + + .dynamic : { *(.dynamic) } :text :dynamic + + .rodata : { *(.rodata*) } :text + + .text : { *(.text*) } :text =0xe7f001f2 + + .got : { *(.got) } + .rel.plt : { *(.rel.plt) } + + /DISCARD/ : { + *(.note.GNU-stack) + *(.data .data.* .gnu.linkonce.d.* .sdata*) + *(.bss .sbss .dynbss .dynsbss) + } +} + +/* + * We must supply the ELF program headers explicitly to get just one + * PT_LOAD segment, and set the flags explicitly to make segments read-only. + */ +PHDRS +{ + text PT_LOAD FLAGS(5) FILEHDR PHDRS; /* PF_R|PF_X */ + dynamic PT_DYNAMIC FLAGS(4); /* PF_R */ + note PT_NOTE FLAGS(4); /* PF_R */ + eh_frame_hdr PT_GNU_EH_FRAME; +} + +VERSION +{ + LINUX_2.6 { + global: + __vdso_clock_gettime; + __vdso_gettimeofday; + local: *; + }; +} diff --git a/arch/arm/vdso/vdsomunge.c b/arch/arm/vdso/vdsomunge.c new file mode 100644 index 000000000000..9005b07296c8 --- /dev/null +++ b/arch/arm/vdso/vdsomunge.c @@ -0,0 +1,201 @@ +/* + * Copyright 2015 Mentor Graphics Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 of the + * License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * + * vdsomunge - Host program which produces a shared object + * architecturally specified to be usable by both soft- and hard-float + * programs. + * + * The Procedure Call Standard for the ARM Architecture (ARM IHI + * 0042E) says: + * + * 6.4.1 VFP and Base Standard Compatibility + * + * Code compiled for the VFP calling standard is compatible with + * the base standard (and vice-versa) if no floating-point or + * containerized vector arguments or results are used. + * + * And ELF for the ARM Architecture (ARM IHI 0044E) (Table 4-2) says: + * + * If both EF_ARM_ABI_FLOAT_XXXX bits are clear, conformance to the + * base procedure-call standard is implied. + * + * The VDSO is built with -msoft-float, as with the rest of the ARM + * kernel, and uses no floating point arguments or results. The build + * process will produce a shared object that may or may not have the + * EF_ARM_ABI_FLOAT_SOFT flag set (it seems to depend on the binutils + * version; binutils starting with 2.24 appears to set it). The + * EF_ARM_ABI_FLOAT_HARD flag should definitely not be set, and this + * program will error out if it is. + * + * If the soft-float flag is set, this program clears it. That's all + * it does. + */ + +#define _GNU_SOURCE + +#include <byteswap.h> +#include <elf.h> +#include <errno.h> +#include <error.h> +#include <fcntl.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/mman.h> +#include <sys/stat.h> +#include <sys/types.h> +#include <unistd.h> + +#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ +#define HOST_ORDER ELFDATA2LSB +#elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ +#define HOST_ORDER ELFDATA2MSB +#endif + +/* Some of the ELF constants we'd like to use were added to <elf.h> + * relatively recently. + */ +#ifndef EF_ARM_EABI_VER5 +#define EF_ARM_EABI_VER5 0x05000000 +#endif + +#ifndef EF_ARM_ABI_FLOAT_SOFT +#define EF_ARM_ABI_FLOAT_SOFT 0x200 +#endif + +#ifndef EF_ARM_ABI_FLOAT_HARD +#define EF_ARM_ABI_FLOAT_HARD 0x400 +#endif + +static const char *outfile; + +static void cleanup(void) +{ + if (error_message_count > 0 && outfile != NULL) + unlink(outfile); +} + +static Elf32_Word read_elf_word(Elf32_Word word, bool swap) +{ + return swap ? bswap_32(word) : word; +} + +static Elf32_Half read_elf_half(Elf32_Half half, bool swap) +{ + return swap ? bswap_16(half) : half; +} + +static void write_elf_word(Elf32_Word val, Elf32_Word *dst, bool swap) +{ + *dst = swap ? bswap_32(val) : val; +} + +int main(int argc, char **argv) +{ + const Elf32_Ehdr *inhdr; + bool clear_soft_float; + const char *infile; + Elf32_Word e_flags; + const void *inbuf; + struct stat stat; + void *outbuf; + bool swap; + int outfd; + int infd; + + atexit(cleanup); + + if (argc != 3) + error(EXIT_FAILURE, 0, "Usage: %s [infile] [outfile]", argv[0]); + + infile = argv[1]; + outfile = argv[2]; + + infd = open(infile, O_RDONLY); + if (infd < 0) + error(EXIT_FAILURE, errno, "Cannot open %s", infile); + + if (fstat(infd, &stat) != 0) + error(EXIT_FAILURE, errno, "Failed stat for %s", infile); + + inbuf = mmap(NULL, stat.st_size, PROT_READ, MAP_PRIVATE, infd, 0); + if (inbuf == MAP_FAILED) + error(EXIT_FAILURE, errno, "Failed to map %s", infile); + + close(infd); + + inhdr = inbuf; + + if (memcmp(&inhdr->e_ident, ELFMAG, SELFMAG) != 0) + error(EXIT_FAILURE, 0, "Not an ELF file"); + + if (inhdr->e_ident[EI_CLASS] != ELFCLASS32) + error(EXIT_FAILURE, 0, "Unsupported ELF class"); + + swap = inhdr->e_ident[EI_DATA] != HOST_ORDER; + + if (read_elf_half(inhdr->e_type, swap) != ET_DYN) + error(EXIT_FAILURE, 0, "Not a shared object"); + + if (read_elf_half(inhdr->e_machine, swap) != EM_ARM) { + error(EXIT_FAILURE, 0, "Unsupported architecture %#x", + inhdr->e_machine); + } + + e_flags = read_elf_word(inhdr->e_flags, swap); + + if (EF_ARM_EABI_VERSION(e_flags) != EF_ARM_EABI_VER5) { + error(EXIT_FAILURE, 0, "Unsupported EABI version %#x", + EF_ARM_EABI_VERSION(e_flags)); + } + + if (e_flags & EF_ARM_ABI_FLOAT_HARD) + error(EXIT_FAILURE, 0, + "Unexpected hard-float flag set in e_flags"); + + clear_soft_float = !!(e_flags & EF_ARM_ABI_FLOAT_SOFT); + + outfd = open(outfile, O_RDWR | O_CREAT | O_TRUNC, S_IRUSR | S_IWUSR); + if (outfd < 0) + error(EXIT_FAILURE, errno, "Cannot open %s", outfile); + + if (ftruncate(outfd, stat.st_size) != 0) + error(EXIT_FAILURE, errno, "Cannot truncate %s", outfile); + + outbuf = mmap(NULL, stat.st_size, PROT_READ | PROT_WRITE, MAP_SHARED, + outfd, 0); + if (outbuf == MAP_FAILED) + error(EXIT_FAILURE, errno, "Failed to map %s", outfile); + + close(outfd); + + memcpy(outbuf, inbuf, stat.st_size); + + if (clear_soft_float) { + Elf32_Ehdr *outhdr; + + outhdr = outbuf; + e_flags &= ~EF_ARM_ABI_FLOAT_SOFT; + write_elf_word(e_flags, &outhdr->e_flags, swap); + } + + if (msync(outbuf, stat.st_size, MS_SYNC) != 0) + error(EXIT_FAILURE, errno, "Failed to sync %s", outfile); + + return EXIT_SUCCESS; +} diff --git a/arch/arm/vdso/vgettimeofday.c b/arch/arm/vdso/vgettimeofday.c new file mode 100644 index 000000000000..79214d5ff097 --- /dev/null +++ b/arch/arm/vdso/vgettimeofday.c @@ -0,0 +1,282 @@ +/* + * Copyright 2015 Mentor Graphics Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 of the + * License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/compiler.h> +#include <linux/hrtimer.h> +#include <linux/time.h> +#include <asm/arch_timer.h> +#include <asm/barrier.h> +#include <asm/bug.h> +#include <asm/page.h> +#include <asm/unistd.h> +#include <asm/vdso_datapage.h> + +#ifndef CONFIG_AEABI +#error This code depends on AEABI system call conventions +#endif + +extern struct vdso_data *__get_datapage(void); + +static notrace u32 __vdso_read_begin(const struct vdso_data *vdata) +{ + u32 seq; +repeat: + seq = ACCESS_ONCE(vdata->seq_count); + if (seq & 1) { + cpu_relax(); + goto repeat; + } + return seq; +} + +static notrace u32 vdso_read_begin(const struct vdso_data *vdata) +{ + u32 seq; + + seq = __vdso_read_begin(vdata); + + smp_rmb(); /* Pairs with smp_wmb in vdso_write_end */ + return seq; +} + +static notrace int vdso_read_retry(const struct vdso_data *vdata, u32 start) +{ + smp_rmb(); /* Pairs with smp_wmb in vdso_write_begin */ + return vdata->seq_count != start; +} + +static notrace long clock_gettime_fallback(clockid_t _clkid, + struct timespec *_ts) +{ + register struct timespec *ts asm("r1") = _ts; + register clockid_t clkid asm("r0") = _clkid; + register long ret asm ("r0"); + register long nr asm("r7") = __NR_clock_gettime; + + asm volatile( + " swi #0\n" + : "=r" (ret) + : "r" (clkid), "r" (ts), "r" (nr) + : "memory"); + + return ret; +} + +static notrace int do_realtime_coarse(struct timespec *ts, + struct vdso_data *vdata) +{ + u32 seq; + + do { + seq = vdso_read_begin(vdata); + + ts->tv_sec = vdata->xtime_coarse_sec; + ts->tv_nsec = vdata->xtime_coarse_nsec; + + } while (vdso_read_retry(vdata, seq)); + + return 0; +} + +static notrace int do_monotonic_coarse(struct timespec *ts, + struct vdso_data *vdata) +{ + struct timespec tomono; + u32 seq; + + do { + seq = vdso_read_begin(vdata); + + ts->tv_sec = vdata->xtime_coarse_sec; + ts->tv_nsec = vdata->xtime_coarse_nsec; + + tomono.tv_sec = vdata->wtm_clock_sec; + tomono.tv_nsec = vdata->wtm_clock_nsec; + + } while (vdso_read_retry(vdata, seq)); + + ts->tv_sec += tomono.tv_sec; + timespec_add_ns(ts, tomono.tv_nsec); + + return 0; +} + +#ifdef CONFIG_ARM_ARCH_TIMER + +static notrace u64 get_ns(struct vdso_data *vdata) +{ + u64 cycle_delta; + u64 cycle_now; + u64 nsec; + + cycle_now = arch_counter_get_cntvct(); + + cycle_delta = (cycle_now - vdata->cs_cycle_last) & vdata->cs_mask; + + nsec = (cycle_delta * vdata->cs_mult) + vdata->xtime_clock_snsec; + nsec >>= vdata->cs_shift; + + return nsec; +} + +static notrace int do_realtime(struct timespec *ts, struct vdso_data *vdata) +{ + u64 nsecs; + u32 seq; + + do { + seq = vdso_read_begin(vdata); + + if (!vdata->tk_is_cntvct) + return -1; + + ts->tv_sec = vdata->xtime_clock_sec; + nsecs = get_ns(vdata); + + } while (vdso_read_retry(vdata, seq)); + + ts->tv_nsec = 0; + timespec_add_ns(ts, nsecs); + + return 0; +} + +static notrace int do_monotonic(struct timespec *ts, struct vdso_data *vdata) +{ + struct timespec tomono; + u64 nsecs; + u32 seq; + + do { + seq = vdso_read_begin(vdata); + + if (!vdata->tk_is_cntvct) + return -1; + + ts->tv_sec = vdata->xtime_clock_sec; + nsecs = get_ns(vdata); + + tomono.tv_sec = vdata->wtm_clock_sec; + tomono.tv_nsec = vdata->wtm_clock_nsec; + + } while (vdso_read_retry(vdata, seq)); + + ts->tv_sec += tomono.tv_sec; + ts->tv_nsec = 0; + timespec_add_ns(ts, nsecs + tomono.tv_nsec); + + return 0; +} + +#else /* CONFIG_ARM_ARCH_TIMER */ + +static notrace int do_realtime(struct timespec *ts, struct vdso_data *vdata) +{ + return -1; +} + +static notrace int do_monotonic(struct timespec *ts, struct vdso_data *vdata) +{ + return -1; +} + +#endif /* CONFIG_ARM_ARCH_TIMER */ + +notrace int __vdso_clock_gettime(clockid_t clkid, struct timespec *ts) +{ + struct vdso_data *vdata; + int ret = -1; + + vdata = __get_datapage(); + + switch (clkid) { + case CLOCK_REALTIME_COARSE: + ret = do_realtime_coarse(ts, vdata); + break; + case CLOCK_MONOTONIC_COARSE: + ret = do_monotonic_coarse(ts, vdata); + break; + case CLOCK_REALTIME: + ret = do_realtime(ts, vdata); + break; + case CLOCK_MONOTONIC: + ret = do_monotonic(ts, vdata); + break; + default: + break; + } + + if (ret) + ret = clock_gettime_fallback(clkid, ts); + + return ret; +} + +static notrace long gettimeofday_fallback(struct timeval *_tv, + struct timezone *_tz) +{ + register struct timezone *tz asm("r1") = _tz; + register struct timeval *tv asm("r0") = _tv; + register long ret asm ("r0"); + register long nr asm("r7") = __NR_gettimeofday; + + asm volatile( + " swi #0\n" + : "=r" (ret) + : "r" (tv), "r" (tz), "r" (nr) + : "memory"); + + return ret; +} + +notrace int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) +{ + struct timespec ts; + struct vdso_data *vdata; + int ret; + + vdata = __get_datapage(); + + ret = do_realtime(&ts, vdata); + if (ret) + return gettimeofday_fallback(tv, tz); + + if (tv) { + tv->tv_sec = ts.tv_sec; + tv->tv_usec = ts.tv_nsec / 1000; + } + if (tz) { + tz->tz_minuteswest = vdata->tz_minuteswest; + tz->tz_dsttime = vdata->tz_dsttime; + } + + return ret; +} + +/* Avoid unresolved references emitted by GCC */ + +void __aeabi_unwind_cpp_pr0(void) +{ +} + +void __aeabi_unwind_cpp_pr1(void) +{ +} + +void __aeabi_unwind_cpp_pr2(void) +{ +} diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 263a2044c65b..224081ccc92f 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -53,105 +53,33 @@ EXPORT_SYMBOL_GPL(xen_platform_pci_unplug); static __read_mostly int xen_events_irq = -1; -/* map fgmfn of domid to lpfn in the current domain */ -static int map_foreign_page(unsigned long lpfn, unsigned long fgmfn, - unsigned int domid) +int xen_remap_domain_mfn_array(struct vm_area_struct *vma, + unsigned long addr, + xen_pfn_t *mfn, int nr, + int *err_ptr, pgprot_t prot, + unsigned domid, + struct page **pages) { - int rc; - struct xen_add_to_physmap_range xatp = { - .domid = DOMID_SELF, - .foreign_domid = domid, - .size = 1, - .space = XENMAPSPACE_gmfn_foreign, - }; - xen_ulong_t idx = fgmfn; - xen_pfn_t gpfn = lpfn; - int err = 0; - - set_xen_guest_handle(xatp.idxs, &idx); - set_xen_guest_handle(xatp.gpfns, &gpfn); - set_xen_guest_handle(xatp.errs, &err); - - rc = HYPERVISOR_memory_op(XENMEM_add_to_physmap_range, &xatp); - if (rc || err) { - pr_warn("Failed to map pfn to mfn rc:%d:%d pfn:%lx mfn:%lx\n", - rc, err, lpfn, fgmfn); - return 1; - } - return 0; -} - -struct remap_data { - xen_pfn_t fgmfn; /* foreign domain's gmfn */ - pgprot_t prot; - domid_t domid; - struct vm_area_struct *vma; - int index; - struct page **pages; - struct xen_remap_mfn_info *info; -}; - -static int remap_pte_fn(pte_t *ptep, pgtable_t token, unsigned long addr, - void *data) -{ - struct remap_data *info = data; - struct page *page = info->pages[info->index++]; - unsigned long pfn = page_to_pfn(page); - pte_t pte = pte_mkspecial(pfn_pte(pfn, info->prot)); - - if (map_foreign_page(pfn, info->fgmfn, info->domid)) - return -EFAULT; - set_pte_at(info->vma->vm_mm, addr, ptep, pte); - - return 0; + return xen_xlate_remap_gfn_array(vma, addr, mfn, nr, err_ptr, + prot, domid, pages); } +EXPORT_SYMBOL_GPL(xen_remap_domain_mfn_array); +/* Not used by XENFEAT_auto_translated guests. */ int xen_remap_domain_mfn_range(struct vm_area_struct *vma, - unsigned long addr, - xen_pfn_t mfn, int nr, - pgprot_t prot, unsigned domid, - struct page **pages) + unsigned long addr, + xen_pfn_t mfn, int nr, + pgprot_t prot, unsigned domid, + struct page **pages) { - int err; - struct remap_data data; - - /* TBD: Batching, current sole caller only does page at a time */ - if (nr > 1) - return -EINVAL; - - data.fgmfn = mfn; - data.prot = prot; - data.domid = domid; - data.vma = vma; - data.index = 0; - data.pages = pages; - err = apply_to_page_range(vma->vm_mm, addr, nr << PAGE_SHIFT, - remap_pte_fn, &data); - return err; + return -ENOSYS; } EXPORT_SYMBOL_GPL(xen_remap_domain_mfn_range); int xen_unmap_domain_mfn_range(struct vm_area_struct *vma, int nr, struct page **pages) { - int i; - - for (i = 0; i < nr; i++) { - struct xen_remove_from_physmap xrp; - unsigned long rc, pfn; - - pfn = page_to_pfn(pages[i]); - - xrp.domid = DOMID_SELF; - xrp.gpfn = pfn; - rc = HYPERVISOR_memory_op(XENMEM_remove_from_physmap, &xrp); - if (rc) { - pr_warn("Failed to unmap pfn:%lx rc:%ld\n", - pfn, rc); - return rc; - } - } - return 0; + return xen_xlate_unmap_gfn_range(vma, nr, pages); } EXPORT_SYMBOL_GPL(xen_unmap_domain_mfn_range); |