diff options
Diffstat (limited to 'arch/arm64/boot/dts/st/stm32mp257f-ev1.dts')
| -rw-r--r-- | arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 195 |
1 files changed, 195 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts index 6f393b082789..836b1958ce65 100644 --- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts +++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts @@ -27,6 +27,44 @@ stdout-path = "serial0:115200n8"; }; + clocks { + clk_ext_camera: clk-ext-camera { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + pad_clk: pad-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + }; + }; + + imx335_2v9: regulator-2v9 { + compatible = "regulator-fixed"; + regulator-name = "imx335-avdd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + + imx335_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "imx335-ovdd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + imx335_1v2: regulator-1v2 { + compatible = "regulator-fixed"; + regulator-name = "imx335-dvdd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x1 0x0>; @@ -42,6 +80,11 @@ reg = <0x0 0x80000000 0x0 0x4000000>; no-map; }; + + mm_ospi1: mm-ospi@60000000 { + reg = <0x0 0x60000000 0x0 0x10000000>; + no-map; + }; }; }; @@ -50,6 +93,46 @@ status = "okay"; }; +&combophy { + clocks = <&rcc CK_BUS_USB3PCIEPHY>, <&rcc CK_KER_USB3PCIEPHY>, <&pad_clk>; + clock-names = "apb", "ker", "pad"; + status = "okay"; +}; + +&csi { + vdd-supply = <&scmi_vddcore>; + vdda18-supply = <&scmi_v1v8>; + status = "okay"; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + csi_sink: endpoint { + remote-endpoint = <&imx335_ep>; + data-lanes = <1 2>; + bus-type = <4>; + }; + }; + port@1 { + reg = <1>; + csi_source: endpoint { + remote-endpoint = <&dcmipp_0>; + }; + }; + }; +}; + +&dcmipp { + status = "okay"; + port { + dcmipp_0: endpoint { + remote-endpoint = <&csi_source>; + bus-type = <4>; + }; + }; +}; + ðernet2 { pinctrl-names = "default", "sleep"; pinctrl-0 = <ð2_rgmii_pins_a>; @@ -81,6 +164,25 @@ i2c-scl-falling-time-ns = <13>; clock-frequency = <400000>; status = "okay"; + + imx335: camera@1a { + compatible = "sony,imx335"; + reg = <0x1a>; + clocks = <&clk_ext_camera>; + avdd-supply = <&imx335_2v9>; + ovdd-supply = <&imx335_1v8>; + dvdd-supply = <&imx335_1v2>; + reset-gpios = <&gpioi 7 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; + + port { + imx335_ep: endpoint { + remote-endpoint = <&csi_sink>; + clock-lanes = <0>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <594000000>; + }; + }; + }; }; &i2c8 { @@ -93,6 +195,41 @@ status = "disabled"; }; +&ommanager { + memory-region = <&mm_ospi1>; + pinctrl-0 = <&ospi_port1_clk_pins_a + &ospi_port1_io03_pins_a + &ospi_port1_cs0_pins_a>; + pinctrl-1 = <&ospi_port1_clk_sleep_pins_a + &ospi_port1_io03_sleep_pins_a + &ospi_port1_cs0_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + + spi@0 { + #address-cells = <1>; + #size-cells = <0>; + memory-region = <&mm_ospi1>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + spi-max-frequency = <50000000>; + }; + }; +}; + +/* use LPTIMER with tick broadcast for suspend mode */ +&lptimer3 { + status = "okay"; + timer { + status = "okay"; + }; +}; + &rtc { status = "okay"; }; @@ -156,6 +293,64 @@ status = "disabled"; }; +&timers3 { + status = "disabled"; + counter { + status = "okay"; + }; + pwm { + pinctrl-0 = <&pwm3_pins_a>; + pinctrl-1 = <&pwm3_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@2 { + status = "okay"; + }; +}; + +&timers8 { + status = "disabled"; + counter { + status = "okay"; + }; + pwm { + pinctrl-0 = <&pwm8_pins_a>; + pinctrl-1 = <&pwm8_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@7 { + status = "okay"; + }; +}; + +&timers10 { + status = "disabled"; + counter { + pinctrl-0 = <&tim10_counter_pins_a>; + pinctrl-1 = <&tim10_counter_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; +}; + +&timers12 { + status = "disabled"; + counter { + status = "okay"; + }; + pwm { + pinctrl-0 = <&pwm12_pins_a>; + pinctrl-1 = <&pwm12_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@11 { + status = "okay"; + }; +}; + &usart2 { pinctrl-names = "default", "idle", "sleep"; pinctrl-0 = <&usart2_pins_a>; |