diff options
Diffstat (limited to 'arch/arm64/boot/dts/st/stm32mp251.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/st/stm32mp251.dtsi | 279 |
1 files changed, 279 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi new file mode 100644 index 000000000000..5268a4321841 --- /dev/null +++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi @@ -0,0 +1,279 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a35"; + device_type = "cpu"; + reg = <0>; + enable-method = "psci"; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a35-pmu"; + interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>; + interrupt-parent = <&intc>; + }; + + clocks { + ck_flexgen_08: ck-flexgen-08 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + }; + + ck_flexgen_51: ck-flexgen-51 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; + + ck_icn_ls_mcu: ck-icn-ls-mcu { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + scmi { + compatible = "linaro,scmi-optee"; + #address-cells = <1>; + #size-cells = <0>; + linaro,optee-channel-id = <0>; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; + }; + }; + + intc: interrupt-controller@4ac00000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x0 0x4ac10000 0x0 0x1000>, + <0x0 0x4ac20000 0x0 0x2000>, + <0x0 0x4ac40000 0x0 0x2000>, + <0x0 0x4ac60000 0x0 0x2000>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + always-on; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges = <0x0 0x0 0x0 0x80000000>; + + rifsc: rifsc-bus@42080000 { + compatible = "simple-bus"; + reg = <0x42080000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usart2: serial@400e0000 { + compatible = "st,stm32h7-uart"; + reg = <0x400e0000 0x400>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ck_flexgen_08>; + status = "disabled"; + }; + }; + + syscfg: syscon@44230000 { + compatible = "st,stm32mp25-syscfg", "syscon"; + reg = <0x44230000 0x10000>; + }; + + pinctrl: pinctrl@44240000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp257-pinctrl"; + ranges = <0 0x44240000 0xa0400>; + pins-are-numbered; + + gpioa: gpio@44240000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOA"; + status = "disabled"; + }; + + gpiob: gpio@44250000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x10000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOB"; + status = "disabled"; + }; + + gpioc: gpio@44260000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x20000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOC"; + status = "disabled"; + }; + + gpiod: gpio@44270000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x30000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOD"; + status = "disabled"; + }; + + gpioe: gpio@44280000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x40000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOE"; + status = "disabled"; + }; + + gpiof: gpio@44290000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x50000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOF"; + status = "disabled"; + }; + + gpiog: gpio@442a0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x60000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOG"; + status = "disabled"; + }; + + gpioh: gpio@442b0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x70000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOH"; + status = "disabled"; + }; + + gpioi: gpio@442c0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x80000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOI"; + status = "disabled"; + }; + + gpioj: gpio@442d0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x90000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOJ"; + status = "disabled"; + }; + + gpiok: gpio@442e0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xa0000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOK"; + status = "disabled"; + }; + }; + + pinctrl_z: pinctrl@46200000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp257-z-pinctrl"; + ranges = <0 0x46200000 0x400>; + pins-are-numbered; + + gpioz: gpio@46200000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOZ"; + st,bank-ioport = <11>; + status = "disabled"; + }; + + }; + }; +}; |