diff options
Diffstat (limited to 'arch/arm/mach-imx/mach-imx6q.c')
| -rw-r--r-- | arch/arm/mach-imx/mach-imx6q.c | 88 |
1 files changed, 0 insertions, 88 deletions
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 703998ebb52e..11dcc369ec14 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -40,27 +40,6 @@ static int ksz9021rn_phy_fixup(struct phy_device *phydev) return 0; } -static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val) -{ - phy_write(dev, 0x0d, device); - phy_write(dev, 0x0e, reg); - phy_write(dev, 0x0d, (1 << 14) | device); - phy_write(dev, 0x0e, val); -} - -static int ksz9031rn_phy_fixup(struct phy_device *dev) -{ - /* - * min rx data delay, max rx/tx clock delay, - * min rx/tx control delay - */ - mmd_write_reg(dev, 2, 4, 0); - mmd_write_reg(dev, 2, 5, 0); - mmd_write_reg(dev, 2, 8, 0x003ff); - - return 0; -} - /* * fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High * as they are used for slots1-7 PERST# @@ -89,75 +68,11 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup); -static int ar8031_phy_fixup(struct phy_device *dev) -{ - u16 val; - - /* To enable AR8031 output a 125MHz clk from CLK_25M */ - phy_write(dev, 0xd, 0x7); - phy_write(dev, 0xe, 0x8016); - phy_write(dev, 0xd, 0x4007); - - val = phy_read(dev, 0xe); - val &= 0xffe3; - val |= 0x18; - phy_write(dev, 0xe, val); - - /* introduce tx clock delay */ - phy_write(dev, 0x1d, 0x5); - val = phy_read(dev, 0x1e); - val |= 0x0100; - phy_write(dev, 0x1e, val); - - return 0; -} - -#define PHY_ID_AR8031 0x004dd074 - -static int ar8035_phy_fixup(struct phy_device *dev) -{ - u16 val; - - /* Ar803x phy SmartEEE feature cause link status generates glitch, - * which cause ethernet link down/up issue, so disable SmartEEE - */ - phy_write(dev, 0xd, 0x3); - phy_write(dev, 0xe, 0x805d); - phy_write(dev, 0xd, 0x4003); - - val = phy_read(dev, 0xe); - phy_write(dev, 0xe, val & ~(1 << 8)); - - /* - * Enable 125MHz clock from CLK_25M on the AR8031. This - * is fed in to the IMX6 on the ENET_REF_CLK (V22) pad. - * Also, introduce a tx clock delay. - * - * This is the same as is the AR8031 fixup. - */ - ar8031_phy_fixup(dev); - - /*check phy power*/ - val = phy_read(dev, 0x0); - if (val & BMCR_PDOWN) - phy_write(dev, 0x0, val & ~BMCR_PDOWN); - - return 0; -} - -#define PHY_ID_AR8035 0x004dd072 - static void __init imx6q_enet_phy_init(void) { if (IS_BUILTIN(CONFIG_PHYLIB)) { phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); - phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK, - ksz9031rn_phy_fixup); - phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef, - ar8031_phy_fixup); - phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef, - ar8035_phy_fixup); } } @@ -257,9 +172,6 @@ static void __init imx6q_init_machine(void) imx_get_soc_revision()); imx6q_enet_phy_init(); - - of_platform_default_populate(NULL, NULL, NULL); - imx_anatop_init(); cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init(); imx6q_1588_init(); |