diff options
Diffstat (limited to 'arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi | 348 |
1 files changed, 348 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi new file mode 100644 index 000000000000..92d906bfd5d7 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi @@ -0,0 +1,348 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) 2022 Marek Vasut <marex@denx.de> + */ + +/ { + aliases { + ethernet0 = ðernet0; + ethernet1 = &ksz8851; + mmc0 = &sdmmc1; + rtc0 = &hwrtc; + rtc1 = &rtc; + serial0 = &uart4; + serial1 = &uart8; + serial2 = &usart3; + serial3 = &uart5; + spi0 = &qspi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + led { + compatible = "gpio-leds"; + led1 { + label = "yellow:user0"; + gpios = <&gpioz 6 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led2 { + label = "red:user1"; + gpios = <&gpioz 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + ethernet_vio: vioregulator { + compatible = "regulator-fixed"; + regulator-name = "vio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpioh 2 GPIO_ACTIVE_LOW>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd>; + }; +}; + +&adc { /* X11 ADC inputs */ + pinctrl-names = "default"; + pinctrl-0 = <&adc12_ain_pins_b>; + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vdda>; + status = "okay"; + + adc1: adc@0 { + status = "okay"; + channel@0 { + reg = <0>; + st,min-sample-time-ns = <5000>; + }; + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; + }; + channel@6 { + reg = <6>; + st,min-sample-time-ns = <5000>; + }; + }; + + adc2: adc@100 { + status = "okay"; + channel@0 { + reg = <0>; + st,min-sample-time-ns = <5000>; + }; + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; + }; + channel@2 { + reg = <2>; + st,min-sample-time-ns = <5000>; + }; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_c>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_c>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>; + reset-delay-us = <1000>; + reset-post-delay-us = <1000>; + + phy0: ethernet-phy@7 { + reg = <7>; + + rxc-skew-ps = <1500>; + rxdv-skew-ps = <540>; + rxd0-skew-ps = <420>; + rxd1-skew-ps = <420>; + rxd2-skew-ps = <420>; + rxd3-skew-ps = <420>; + + txc-skew-ps = <1440>; + txen-skew-ps = <540>; + txd0-skew-ps = <420>; + txd1-skew-ps = <420>; + txd2-skew-ps = <420>; + txd3-skew-ps = <420>; + }; + }; +}; + +&fmc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&fmc_pins_b>; + pinctrl-1 = <&fmc_sleep_pins_b>; + status = "okay"; + + ksz8851: ethernet@1,0 { + compatible = "micrel,ks8851-mll"; + reg = <1 0x0 0x2>, <1 0x2 0x20000>; + interrupt-parent = <&gpioc>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + bank-width = <2>; + + /* Timing values are in nS */ + st,fmc2-ebi-cs-mux-enable; + st,fmc2-ebi-cs-transaction-type = <4>; + st,fmc2-ebi-cs-buswidth = <16>; + st,fmc2-ebi-cs-address-setup-ns = <5>; + st,fmc2-ebi-cs-address-hold-ns = <5>; + st,fmc2-ebi-cs-bus-turnaround-ns = <5>; + st,fmc2-ebi-cs-data-setup-ns = <45>; + st,fmc2-ebi-cs-data-hold-ns = <1>; + st,fmc2-ebi-cs-write-address-setup-ns = <5>; + st,fmc2-ebi-cs-write-address-hold-ns = <5>; + st,fmc2-ebi-cs-write-bus-turnaround-ns = <5>; + st,fmc2-ebi-cs-write-data-setup-ns = <45>; + st,fmc2-ebi-cs-write-data-hold-ns = <1>; + }; +}; + +&gpioa { + gpio-line-names = "", "", "", "", + "DRCC-VAR2", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpioe { + gpio-line-names = "", "", "", "", + "", "DRCC-GPIO0", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiog { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "DRCC-GPIO5", "", "", ""; +}; + +&gpioh { + gpio-line-names = "", "", "", "DRCC-HW2", + "DRCC-GPIO4", "", "", "", + "DRCC-HW1", "DRCC-HW0", "", "DRCC-VAR1", + "DRCC-VAR0", "", "", "DRCC-GPIO6"; +}; + +&gpioi { + gpio-line-names = "", "", "", "", + "", "", "", "DRCC-GPIO2", + "", "DRCC-GPIO1", "", "", + "", "", "", ""; +}; + +&i2c1 { /* X11 I2C1 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_b>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c4 { + hwrtc: rtc@32 { + compatible = "microcrystal,rv8803"; + reg = <0x32>; + }; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + pagesize = <16>; + }; + + dh_mac_eeprom: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; +}; + +&sdmmc1 { /* MicroSD */ + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&vdd>; + vqmmc-supply = <&vdd>; + status = "okay"; +}; + +&sdmmc2 { /* eMMC */ + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + st,neg-edge; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&vdd>; + status = "okay"; +}; + +&sdmmc3 { /* SDIO Wi-Fi */ + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + bus-width = <4>; + mmc-ddr-3_3v; + st,neg-edge; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + status = "okay"; +}; + +&spi2 { /* X11 SPI */ + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_b>; + cs-gpios = <&gpioi 0 0>; + status = "disabled"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&uart4 { + label = "UART0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_d>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart5 { /* X11 UART */ + label = "X11-UART5"; + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart8 { + label = "RS485-1"; + pinctrl-names = "default"; + pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>; + uart-has-rtscts; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&usart3 { /* RS485 or RS232 */ + label = "RS485-2"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usart3_pins_e>; + pinctrl-1 = <&usart3_sleep_pins_e>; + uart-has-rtscts; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbh_ohci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "otg"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phy-names = "usb2-phy"; + phys = <&usbphyc_port1 0>; + vbus-supply = <&vbus_otg>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + connector { + compatible = "usb-a-connector"; + vbus-supply = <&vbus_sw>; + }; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; +}; |