diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts')
| -rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts | 313 |
1 files changed, 313 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts new file mode 100644 index 000000000000..3a723843d562 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts @@ -0,0 +1,313 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for Kamstrup OMNIA Flex Concentrator. + * + * Copyright (C) 2020 Kamstrup A/S + * Author: Bruno Thomsen <bruno.thomsen@gmail.com> + */ + +/dts-v1/; + +#include "imx7d-tqma7.dtsi" + +/* One I2C device on TQMa7 SoM is not mounted */ +/delete-node/ &ds1339; + +/ { + model = "Kamstrup OMNIA Flex Concentrator"; + compatible = "kam,imx7d-flex-concentrator", "fsl,imx7d"; + + memory@80000000 { + device_type = "memory"; + /* 1024 MB - TQMa7D board configuration */ + reg = <0x80000000 0x40000000>; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "VBUS_USBOTG2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8_REF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&sw2_reg>; + }; + + /* + * Human Machine Interface consists of 4 dual red/green LEDs. + * hmi-a:green is controlled directly by the switch-mode power supply. + * hmi-a:red is not used. + */ + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + label = "hmi-b:red:heartbeat-degraded"; + gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + label = "hmi-b:green:heartbeat-running"; + gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-2 { + label = "hmi-c:red:mesh-error"; + gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + }; + + led-3 { + label = "hmi-c:green:mesh-activity"; + gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + }; + + led-4 { + label = "hmi-d:red:omnia-error"; + gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; + }; + + led-5 { + label = "hmi-d:green:omnia-activity"; + gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + }; + }; + + /* + * Errata e10574 board restart workaround. + */ + gpio-restart { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_restart>; + compatible = "gpio-restart"; + gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +/* + * Analog signals + * ADC1_IN0: SMPS - 5V output monitor (voltage divider: 1/0.2806) + */ +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio4 23 GPIO_ACTIVE_LOW>; + status = "okay"; + + pcf2127: rtc@0 { + compatible = "nxp,pcf2127"; + reg = <0>; + spi-max-frequency = <2000000>; + reset-source; + }; +}; + +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + cs-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>; + status = "okay"; + + /* + * ST chip maximum SPI clock frequency is 33 MHz. + * + * TCG specification - Section 6.4.1 Clocking: + * TPM shall support a SPI clock frequency range of 10-24 MHz. + */ + st33htph: tpm-tis@0 { + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <24000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy>; + status = "okay"; + + /* + * MDIO bus reset is used to generate PHY device reset before + * Ethernet PHY type ID auto-detection. Otherwise this communication + * fails as device does not answer when recommended reset circuit + * is used. + */ + mdio { + #address-cells = <1>; + #size-cells = <0>; + + reset-delay-us = <100000>; + reset-post-delay-us = <500000>; + reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; + + /* Microchip/Micrel KSZ8081RNB */ + ethphy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + reg = <1>; + }; + }; +}; + +/* + * Detection signals for internal USB modules. + * Used for robust USB plug and play handling such as USB downstream port + * power-cycle and USB hub reset in case of misbehaving or crashed modules. + * + * SMPS - AC input monitor based on zero crossing. + * Used for last gasp notification. + */ +&gpio3 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "smps-ac-monitor", "", "usb-hub-reset", "", + "", "", "", "", "", "", "", "", + "", "module-b-detection", "", "module-a-detection", "", "", "", ""; +}; + +/* + * Tamper IRQ trigger timestamp reading. + * Used for sealed cover opened/closed notification. + */ +&gpio5 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "rtc-tamper-irq", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_misc>; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO 0x7c /* X2-15 */ + MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x74 /* X2-18 */ + MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x74 /* X2-13 */ + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x74 /* X2-20 */ + /* RTC - Tamper IRQ */ + MX7D_PAD_SD2_CLK__GPIO5_IO12 0x3c /* X1-92 */ + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX7D_PAD_LCD_CLK__ECSPI4_MISO 0x7c /* X2-72 */ + MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI 0x74 /* X2-68 */ + MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK 0x74 /* X2-76 */ + MX7D_PAD_LCD_VSYNC__GPIO3_IO3 0x74 /* X2-78 */ + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x03 /* X2-48 */ + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x03 /* X2-46 */ + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71 /* X2-53 */ + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71 /* X2-55 */ + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71 /* X2-61 */ + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x79 /* X2-56 */ + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x79 /* X2-58 */ + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x79 /* X2-64 */ + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x73 /* X2-52 */ + /* PHY reset: SRE_FAST, DSE_X1 */ + MX7D_PAD_ENET1_COL__GPIO7_IO15 0x00 /* X1-96 */ + /* Clock from PHY to MAC: 100kPU */ + MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x70 /* X3-4 */ + /* PHY interrupt: 100kPU, HYS */ + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x78 /* X1-80 */ + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA01__GPIO3_IO6 0x14 /* X2-82 */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* X1-82 */ + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* X1-84 */ + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* X1-86 */ + MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x14 /* X1-88 */ + MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x14 /* X1-90 */ + >; + }; + + pinctrl_misc: miscgrp { + fsl,pins = < + /* Module A detection (low = present) */ + MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x7c /* X2-105 */ + /* Module B detection (low = present) */ + MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x7c /* X2-103 */ + /* SMPS - AC input monitor (high = failure) */ + MX7D_PAD_LCD_DATA07__GPIO3_IO12 0x7c /* X2-88 */ + /* USB - Hub reset */ + MX7D_PAD_LCD_DATA09__GPIO3_IO14 0x74 /* X2-92 */ + >; + }; + + pinctrl_restart: restartgrp { + fsl,pins = < + MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x74 /* X1-94 */ + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX 0x7e /* X3-14 */ + MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX 0x76 /* X3-16 */ + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC 0x5c /* X3-11 */ + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59 /* X3-9 */ + >; + }; + +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; +}; + +&usbotg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2>; + vbus-supply = <®_usb_otg2_vbus>; + srp-disable; + hnp-disable; + adp-disable; + over-current-active-low; + dr_mode = "host"; + status = "okay"; +}; + +/* + * External watchdog feature provided by pcf2127. + */ +&wdog1 { + status = "disabled"; +}; |