diff options
Diffstat (limited to 'arch/arm/boot/dts/microchip')
59 files changed, 1139 insertions, 171 deletions
diff --git a/arch/arm/boot/dts/microchip/aks-cdu.dts b/arch/arm/boot/dts/microchip/aks-cdu.dts index b65f80e1ef05..302cb872efa1 100644 --- a/arch/arm/boot/dts/microchip/aks-cdu.dts +++ b/arch/arm/boot/dts/microchip/aks-cdu.dts @@ -56,7 +56,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/animeo_ip.dts b/arch/arm/boot/dts/microchip/animeo_ip.dts index 7f527622d3f2..c11f4f7dac94 100644 --- a/arch/arm/boot/dts/microchip/animeo_ip.dts +++ b/arch/arm/boot/dts/microchip/animeo_ip.dts @@ -136,7 +136,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/microchip/at91-foxg20.dts b/arch/arm/boot/dts/microchip/at91-foxg20.dts index 9dfd5de808d1..8e9e87665045 100644 --- a/arch/arm/boot/dts/microchip/at91-foxg20.dts +++ b/arch/arm/boot/dts/microchip/at91-foxg20.dts @@ -131,7 +131,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-qil_a9260.dts b/arch/arm/boot/dts/microchip/at91-qil_a9260.dts index 5ccb3c139592..892dbd8dbbed 100644 --- a/arch/arm/boot/dts/microchip/at91-qil_a9260.dts +++ b/arch/arm/boot/dts/microchip/at91-qil_a9260.dts @@ -114,7 +114,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts b/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts index 2fb51b9aca2a..49dc1a4ccb36 100644 --- a/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts +++ b/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts @@ -105,7 +105,7 @@ status = "okay"; }; - usb0: ohci@500000 { + usb0: usb@500000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts index cdc56b53299d..c1ff3248bd8f 100644 --- a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts @@ -609,7 +609,7 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <104000000>; - spi-cs-setup-ns = <7>; + spi-cs-setup-delay-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi index 8ac85dac5a96..13c28e92b17e 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi @@ -44,7 +44,7 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <104000000>; - spi-cs-setup-ns = <7>; + spi-cs-setup-delay-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts index f3ffb8f01d8a..45edf6214cf7 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts @@ -37,7 +37,7 @@ status = "okay"; }; - usb1: ohci@400000 { + usb1: usb@400000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */ &pioA PIN_PA27 GPIO_ACTIVE_HIGH @@ -48,7 +48,7 @@ status = "okay"; }; - usb2: ehci@500000 { + usb2: usb@500000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi index ef11606a82b3..0417f53b3e96 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi @@ -234,7 +234,7 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <104000000>; - spi-cs-setup-ns = <7>; + spi-cs-setup-delay-ns = <7>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; m25p,fast-read; @@ -385,7 +385,7 @@ wilc: wifi@0 { reg = <0>; - compatible = "microchip,wilc1000"; + compatible = "microchip,wilc3000", "microchip,wilc1000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wilc_default>; clocks = <&pmc PMC_TYPE_SYSTEM 9>; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts index 9fa6f1395aa6..fbae6a9af6c3 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts @@ -714,7 +714,7 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <104000000>; - spi-cs-setup-ns = <7>; + spi-cs-setup-delay-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts index e4ae60ef5f8a..10d69f6957cf 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts @@ -47,7 +47,7 @@ status = "okay"; }; - usb1: ohci@400000 { + usb1: usb@400000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioA PIN_PB12 GPIO_ACTIVE_HIGH @@ -58,7 +58,7 @@ status = "okay"; }; - usb2: ehci@500000 { + usb2: usb@500000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts index 4bab3f25b855..7e77a55ed41d 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts @@ -46,7 +46,7 @@ status = "okay"; }; - usb1: ohci@400000 { + usb1: usb@400000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */ &pioA PIN_PB10 GPIO_ACTIVE_HIGH @@ -57,7 +57,7 @@ status = "okay"; }; - usb2: ehci@500000 { + usb2: usb@500000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts index 5662992cf213..d2c43957497d 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts @@ -283,7 +283,7 @@ status = "okay"; }; - usb1: ohci@600000 { + usb1: usb@600000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 3 GPIO_ACTIVE_LOW @@ -294,7 +294,7 @@ status = "okay"; }; - usb2: ehci@700000 { + usb2: usb@700000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts index 8adf567f2f0f..b9725e400501 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts @@ -22,7 +22,7 @@ status = "okay"; }; - usb1: ohci@500000 { + usb1: usb@500000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 11 GPIO_ACTIVE_LOW @@ -31,7 +31,7 @@ status = "okay"; }; - usb2: ehci@600000 { + usb2: usb@600000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts index 95d701d13fef..0ecccb9a809d 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts @@ -164,7 +164,7 @@ status = "okay"; }; - usb1: ohci@500000 { + usb1: usb@500000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 11 GPIO_ACTIVE_HIGH @@ -175,7 +175,7 @@ status = "okay"; }; - usb2: ehci@600000 { + usb2: usb@600000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts index 20ac775059ca..69107d6cd26c 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts @@ -198,7 +198,7 @@ status = "okay"; }; - usb1: ohci@500000 { + usb1: usb@500000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */ &pioE 11 GPIO_ACTIVE_LOW @@ -207,7 +207,7 @@ status = "okay"; }; - usb2: ehci@600000 { + usb2: usb@600000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts index 0f86360fb733..7eaf6ca233ec 100644 --- a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts @@ -30,6 +30,44 @@ device_type = "memory"; reg = <0x60000000 0x40000000>; }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2_default>; + status = "okay"; +}; + +&can3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can3_default>; + status = "okay"; +}; + +&dma0 { + status = "okay"; +}; + +&dma1 { + status = "okay"; +}; + +&dma2 { + status = "okay"; }; &flx6 { @@ -43,11 +81,277 @@ status = "okay"; }; +&flx10 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; +}; + +&gmac0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gmac0_default + &pinctrl_gmac0_mdio_default + &pinctrl_gmac0_txck_default + &pinctrl_gmac0_phy_irq>; + phy-mode = "rgmii-id"; + nvmem-cells = <&eeprom0_eui48>; + nvmem-cell-names = "mac-address"; + status = "okay"; + + ethernet-phy@7 { + reg = <0x7>; + interrupt-parent = <&pioa>; + interrupts = <PIN_PC1 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c10 { + dmas = <0>, <0>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c10_default>; + status = "okay"; + + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <47000>; + label = "VDD3V3"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <47000>; + label = "VDDIODDR"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <47000>; + label = "VDDCORE"; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <47000>; + label = "VDDCPU"; + }; + }; + + pmic@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + lvin-supply = <®_5v>; + pvin1-supply = <®_5v>; + pvin2-supply = <®_5v>; + pvin3-supply = <®_5v>; + pvin4-supply = <®_5v>; + status = "okay"; + + regulators { + vdd_3v3: VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + vddioddr: VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1350000>; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1350000>; + regulator-mode = <4>; + }; + }; + + vddcore: VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1050000>; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + vddcpu: VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1250000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-ramp-delay = <3125>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1050000>; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + vldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + + regulator-state-standby { + regulator-suspend-microvolt = <1800000>; + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vldo2: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + eeprom0: eeprom@51 { + compatible = "microchip,24aa025e48"; + reg = <0x51>; + size = <256>; + pagesize = <16>; + vcc-supply = <&vdd_3v3>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom0_eui48: eui48@fa { + reg = <0xfa 0x6>; + }; + }; + }; +}; + &main_xtal { clock-frequency = <24000000>; }; &pioa { + pinctrl_can1_default: can1-default { + pinmux = <PIN_PD10__CANTX1>, + <PIN_PD11__CANRX1>; + bias-disable; + }; + + pinctrl_can2_default: can2-default { + pinmux = <PIN_PD12__CANTX2>, + <PIN_PD13__CANRX2>; + bias-disable; + }; + + pinctrl_can3_default: can3-default { + pinmux = <PIN_PD14__CANTX3>, + <PIN_PD15__CANRX3>; + bias-disable; + }; + + pinctrl_gmac0_default: gmac0-default { + pinmux = <PIN_PA26__G0_TX0>, + <PIN_PA27__G0_TX1>, + <PIN_PB4__G0_TX2>, + <PIN_PB5__G0_TX3>, + <PIN_PA29__G0_RX0>, + <PIN_PA30__G0_RX1>, + <PIN_PB2__G0_RX2>, + <PIN_PB6__G0_RX3>, + <PIN_PA25__G0_TXCTL>, + <PIN_PB3__G0_RXCK>, + <PIN_PA28__G0_RXCTL>; + slew-rate = <0>; + bias-disable; + }; + + pinctrl_gmac0_mdio_default: gmac0-mdio-default { + pinmux = <PIN_PA31__G0_MDC>, + <PIN_PB0__G0_MDIO>; + bias-disable; + }; + + pinctrl_gmac0_phy_irq: gmac0-phy-irq { + pinmux = <PIN_PC1__GPIO>; + bias-disable; + }; + + pinctrl_gmac0_txck_default: gmac0-txck-default { + pinmux = <PIN_PB1__G0_REFCK>; + slew-rate = <0>; + bias-pull-up; + }; + + pinctrl_i2c10_default: i2c10-default{ + pinmux = <PIN_PB19__FLEXCOM10_IO1>, + <PIN_PB20__FLEXCOM10_IO0>; + bias-pull-up; + }; + pinctrl_sdmmc1_default: sdmmc1-default { cmd-data { pinmux = <PIN_PB22__SDMMC1_CMD>, @@ -77,6 +381,10 @@ }; }; +&rtt { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; +}; + &sdmmc1 { bus-width = <4>; pinctrl-names = "default"; @@ -84,6 +392,15 @@ status = "okay"; }; +&shdwc { + debounce-delay-us = <976>; + status = "okay"; + + input@0 { + reg = <0>; + }; +}; + &slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts index 2dec2218f32c..eb5f27ce1942 100644 --- a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts @@ -369,6 +369,38 @@ spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; + label = "at91-qspi"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "qspi1: at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "qspi1: u-boot"; + reg = <0x40000 0x100000>; + }; + + bootloaderenv@140000 { + label = "qspi1: u-boot env"; + reg = <0x140000 0x40000>; + }; + + dtb@180000 { + label = "qspi1: device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "qspi1: kernel"; + reg = <0x200000 0x600000>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts index 0f5e6ad438dd..3924f62ff0fb 100644 --- a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts @@ -35,16 +35,6 @@ i2c2 = &i2c9; }; - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <24000000>; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -137,6 +127,7 @@ vref-supply = <&vddout25>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>; + atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>; status = "okay"; }; @@ -555,6 +546,10 @@ pinctrl-0 = <&pinctrl_i2s0_default>; }; +&main_xtal { + clock-frequency = <24000000>; +}; + &pdmc0 { #sound-dai-cells = <0>; microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 1 */ @@ -884,6 +879,10 @@ }; }; +&slow_xtal { + clock-frequency = <32768>; +}; + &spdifrx { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spdifrx_default>; diff --git a/arch/arm/boot/dts/microchip/at91-vinco.dts b/arch/arm/boot/dts/microchip/at91-vinco.dts index ecbdacf48708..c5fc51667066 100644 --- a/arch/arm/boot/dts/microchip/at91-vinco.dts +++ b/arch/arm/boot/dts/microchip/at91-vinco.dts @@ -162,7 +162,7 @@ status = "disabled"; }; - usb1: ohci@500000 { + usb1: usb@500000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 11 GPIO_ACTIVE_LOW @@ -171,7 +171,7 @@ status = "disabled"; }; - usb2: ehci@600000 { + usb2: usb@600000 { /* 4G Modem */ status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91rm9200.dtsi b/arch/arm/boot/dts/microchip/at91rm9200.dtsi index 02a838541dc3..e105ad855ce8 100644 --- a/arch/arm/boot/dts/microchip/at91rm9200.dtsi +++ b/arch/arm/boot/dts/microchip/at91rm9200.dtsi @@ -702,7 +702,7 @@ status = "disabled"; }; - usb0: ohci@300000 { + usb0: usb@300000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00300000 0x100000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; @@ -714,9 +714,8 @@ i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */ - &pioA 26 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&pioA 25 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 26 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ diff --git a/arch/arm/boot/dts/microchip/at91rm9200ek.dts b/arch/arm/boot/dts/microchip/at91rm9200ek.dts index 0bf472b157a5..ce691c4692b9 100644 --- a/arch/arm/boot/dts/microchip/at91rm9200ek.dts +++ b/arch/arm/boot/dts/microchip/at91rm9200ek.dts @@ -89,7 +89,7 @@ }; }; - usb0: ohci@300000 { + usb0: usb@300000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9260.dtsi b/arch/arm/boot/dts/microchip/at91sam9260.dtsi index 0038183e9a53..fc0b6a73204f 100644 --- a/arch/arm/boot/dts/microchip/at91sam9260.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9260.dtsi @@ -742,7 +742,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; @@ -781,9 +781,8 @@ i2c_gpio0: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */ - &pioA 24 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&pioA 23 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 24 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ diff --git a/arch/arm/boot/dts/microchip/at91sam9260ek.dts b/arch/arm/boot/dts/microchip/at91sam9260ek.dts index e8e65e60564d..8522a210b484 100644 --- a/arch/arm/boot/dts/microchip/at91sam9260ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9260ek.dts @@ -131,7 +131,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9261.dtsi b/arch/arm/boot/dts/microchip/at91sam9261.dtsi index b57a7fd67197..d1d678b77e84 100644 --- a/arch/arm/boot/dts/microchip/at91sam9261.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9261.dtsi @@ -77,7 +77,7 @@ #size-cells = <1>; ranges; - usb0: ohci@500000 { + usb0: usb@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; @@ -655,8 +655,8 @@ compatible = "i2c-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c_bitbang>; - gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */ - <&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */ + sda-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 8 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ diff --git a/arch/arm/boot/dts/microchip/at91sam9261ek.dts b/arch/arm/boot/dts/microchip/at91sam9261ek.dts index a8f523131cd6..313bc2797fde 100644 --- a/arch/arm/boot/dts/microchip/at91sam9261ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9261ek.dts @@ -31,7 +31,7 @@ }; ahb { - usb0: ohci@500000 { + usb0: usb@500000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9263.dtsi b/arch/arm/boot/dts/microchip/at91sam9263.dtsi index b95d4016ae9f..a4b5d1f228f9 100644 --- a/arch/arm/boot/dts/microchip/at91sam9263.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9263.dtsi @@ -768,7 +768,7 @@ status = "disabled"; }; - usb0: ohci@a00000 { + usb0: usb@a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; @@ -826,9 +826,8 @@ i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ - &pioB 5 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&pioB 4 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioB 5 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ diff --git a/arch/arm/boot/dts/microchip/at91sam9263ek.dts b/arch/arm/boot/dts/microchip/at91sam9263ek.dts index f25692543d71..93c5268a0845 100644 --- a/arch/arm/boot/dts/microchip/at91sam9263ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9263ek.dts @@ -152,7 +152,7 @@ nand@3 { reg = <0x3 0x0 0x800000>; rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; nand-bus-width = <8>; nand-ecc-mode = "soft"; nand-on-flash-bbt; @@ -207,7 +207,7 @@ }; }; - usb0: ohci@a00000 { + usb0: usb@a00000 { num-ports = <2>; status = "okay"; atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi index 4e7cfbbd4241..84a7287107f8 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi @@ -211,7 +211,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts index e0c1e8df81b1..947c011c1b00 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts +++ b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts @@ -46,7 +46,7 @@ led-power-green { label = "smartgw:power:green"; gpios = <&pioC 20 GPIO_ACTIVE_HIGH>; - default-state = "on"; + linux,default-trigger = "timer"; }; led-power-red { diff --git a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi index 157d306ef5c9..4e00ed2d3ecd 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi @@ -964,7 +964,7 @@ status = "disabled"; }; - usb0: ohci@700000 { + usb0: usb@700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -973,7 +973,7 @@ status = "disabled"; }; - usb1: ehci@800000 { + usb1: usb@800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -1010,9 +1010,8 @@ i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */ - &pioA 21 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 21 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <5>; /* ~100 kHz */ diff --git a/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts index 071db4f16313..2a31b2f14893 100644 --- a/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts @@ -303,14 +303,14 @@ }; }; - usb0: ohci@700000 { + usb0: usb@700000 { status = "okay"; num-ports = <2>; atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW &pioD 3 GPIO_ACTIVE_LOW>; }; - usb1: ehci@800000 { + usb1: usb@800000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi index 844bd50943fc..af41c3dbb4bf 100644 --- a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi @@ -748,7 +748,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -786,9 +786,8 @@ i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ - &pioA 31 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ diff --git a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts index 643c3b2ab97e..b06a54e8e237 100644 --- a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts @@ -180,7 +180,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <1>; atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/microchip/at91sam9rl.dtsi b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi index 1fec9fcc7cd1..de74cf2980a0 100644 --- a/arch/arm/boot/dts/microchip/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi @@ -833,8 +833,8 @@ i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */ - <&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */ + sda-gpios = <&pioA 23 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 24 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ @@ -847,8 +847,8 @@ i2c-gpio-1 { compatible = "i2c-gpio"; - gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */ - <&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */ + sda-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ diff --git a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi index 27c1f2861cc3..9070fd06995a 100644 --- a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi @@ -886,7 +886,7 @@ }; }; - usb0: ohci@600000 { + usb0: usb@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -895,7 +895,7 @@ status = "disabled"; }; - usb1: ehci@700000 { + usb1: usb@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -933,9 +933,8 @@ i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ - &pioA 31 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ @@ -948,9 +947,8 @@ i2c-gpio-1 { compatible = "i2c-gpio"; - gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */ - &pioC 1 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioC 1 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ @@ -963,9 +961,8 @@ i2c-gpio-2 { compatible = "i2c-gpio"; - gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ - &pioB 5 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&pioB 4 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioB 5 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ diff --git a/arch/arm/boot/dts/microchip/ethernut5.dts b/arch/arm/boot/dts/microchip/ethernut5.dts index ad7a0850252a..52ccef31b391 100644 --- a/arch/arm/boot/dts/microchip/ethernut5.dts +++ b/arch/arm/boot/dts/microchip/ethernut5.dts @@ -101,7 +101,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/evk-pro3.dts b/arch/arm/boot/dts/microchip/evk-pro3.dts index 6d519d02d190..40c5111c2f0a 100644 --- a/arch/arm/boot/dts/microchip/evk-pro3.dts +++ b/arch/arm/boot/dts/microchip/evk-pro3.dts @@ -45,7 +45,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/mpa1600.dts b/arch/arm/boot/dts/microchip/mpa1600.dts index 005c2758e229..2a97e2c0b894 100644 --- a/arch/arm/boot/dts/microchip/mpa1600.dts +++ b/arch/arm/boot/dts/microchip/mpa1600.dts @@ -57,7 +57,7 @@ }; }; - usb0: ohci@300000 { + usb0: usb@300000 { num-ports = <1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/pm9g45.dts b/arch/arm/boot/dts/microchip/pm9g45.dts index c349fd3758a6..2258e62f5864 100644 --- a/arch/arm/boot/dts/microchip/pm9g45.dts +++ b/arch/arm/boot/dts/microchip/pm9g45.dts @@ -139,12 +139,12 @@ }; }; - usb0: ohci@700000 { + usb0: usb@700000 { status = "okay"; num-ports = <2>; }; - usb1: ehci@800000 { + usb1: usb@800000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi index b8b2c1ddf3f1..b075865e6a76 100644 --- a/arch/arm/boot/dts/microchip/sam9x60.dtsi +++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi @@ -88,7 +88,7 @@ status = "disabled"; }; - usb1: ohci@600000 { + usb1: usb@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -97,7 +97,7 @@ status = "disabled"; }; - usb2: ehci@700000 { + usb2: usb@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi index b217a908f525..66c07e642c3e 100644 --- a/arch/arm/boot/dts/microchip/sam9x7.dtsi +++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi @@ -45,11 +45,13 @@ clocks { slow_xtal: clock-slowxtal { compatible = "fixed-clock"; + clock-output-names = "slow_xtal"; #clock-cells = <0>; }; main_xtal: clock-mainxtal { compatible = "fixed-clock"; + clock-output-names = "main_xtal"; #clock-cells = <0>; }; }; @@ -983,6 +985,32 @@ status = "disabled"; }; + hlcdc: hlcdc@f8038000 { + compatible = "microchip,sam9x75-xlcdc"; + reg = <0xf8038000 0x4000>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>; + clock-names = "periph_clk", "sys_clk", "slow_clk"; + status = "disabled"; + + display-controller { + compatible = "atmel,hlcdc-display-controller"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + pwm { + compatible = "atmel,hlcdc-pwm"; + #pwm-cells = <3>; + }; + }; + flx9: flexcom@f8040000 { compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; reg = <0xf8040000 0x200>; @@ -1087,6 +1115,15 @@ }; }; + lvds_controller: lvds-controller@f8060000 { + compatible = "microchip,sam9x75-lvds"; + reg = <0xf8060000 0x100>; + interrupts = <56 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 56>; + clock-names = "pclk"; + status = "disabled"; + }; + matrix: matrix@ffffde00 { compatible = "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon"; reg = <0xffffde00 0x200>; diff --git a/arch/arm/boot/dts/microchip/sama5d2.dtsi b/arch/arm/boot/dts/microchip/sama5d2.dtsi index 3f99451aef83..17430d7f2055 100644 --- a/arch/arm/boot/dts/microchip/sama5d2.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d2.dtsi @@ -32,6 +32,8 @@ device_type = "cpu"; compatible = "arm,cortex-a5"; reg = <0>; + d-cache-size = <0x8000>; // L1, 32 KB + i-cache-size = <0x8000>; // L1, 32 KB next-level-cache = <&L2>; }; }; @@ -136,7 +138,7 @@ status = "disabled"; }; - usb1: ohci@400000 { + usb1: usb@400000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00400000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; @@ -145,7 +147,7 @@ status = "disabled"; }; - usb2: ehci@500000 { + usb2: usb@500000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00500000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; @@ -160,6 +162,7 @@ interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>; cache-unified; cache-level = <2>; + cache-size = <0x20000>; // L2, 128 KB }; ebi: ebi@10000000 { diff --git a/arch/arm/boot/dts/microchip/sama5d3.dtsi b/arch/arm/boot/dts/microchip/sama5d3.dtsi index 70f380c399ce..00ba59ac1968 100644 --- a/arch/arm/boot/dts/microchip/sama5d3.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d3.dtsi @@ -48,6 +48,8 @@ device_type = "cpu"; compatible = "arm,cortex-a5"; reg = <0x0>; + d-cache-size = <0x8000>; // L1, 32 KB + i-cache-size = <0x8000>; // L1, 32 KB }; }; @@ -1074,7 +1076,7 @@ status = "disabled"; }; - usb1: ohci@600000 { + usb1: usb@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; @@ -1083,7 +1085,7 @@ status = "disabled"; }; - usb2: ehci@700000 { + usb2: usb@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi index 3652c9e24124..90da04b84b39 100644 --- a/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi @@ -172,7 +172,7 @@ status = "okay"; }; - usb1: ohci@600000 { + usb1: usb@600000 { num-ports = <3>; atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH &pioD 26 GPIO_ACTIVE_LOW @@ -181,7 +181,7 @@ status = "okay"; }; - usb2: ehci@700000 { + usb2: usb@700000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/microchip/sama5d4.dtsi b/arch/arm/boot/dts/microchip/sama5d4.dtsi index 355132628604..ec1d68c640de 100644 --- a/arch/arm/boot/dts/microchip/sama5d4.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d4.dtsi @@ -50,6 +50,8 @@ device_type = "cpu"; compatible = "arm,cortex-a5"; reg = <0>; + d-cache-size = <0x8000>; // L1, 32 KB + i-cache-size = <0x8000>; // L1, 32 KB next-level-cache = <&L2>; }; }; @@ -119,7 +121,7 @@ status = "disabled"; }; - usb1: ohci@500000 { + usb1: usb@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; @@ -128,7 +130,7 @@ status = "disabled"; }; - usb2: ehci@600000 { + usb2: usb@600000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00600000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; @@ -143,6 +145,7 @@ interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>; cache-unified; cache-level = <2>; + cache-size = <0x20000>; // L2, 128 KB }; ebi: ebi@10000000 { diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi index 854b30d15dcd..c191acc2c89f 100644 --- a/arch/arm/boot/dts/microchip/sama7d65.dtsi +++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi @@ -9,6 +9,7 @@ */ #include <dt-bindings/clock/at91.h> +#include <dt-bindings/dma/at91.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -31,27 +32,69 @@ device_type = "cpu"; clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>; clock-names = "cpu"; + d-cache-size = <0x8000>; // L1, 32 KB + i-cache-size = <0x8000>; // L1, 32 KB + next-level-cache = <&L2>; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x40000>; // L2, 256 KB + cache-unified; + }; }; }; clocks { main_xtal: clock-mainxtal { compatible = "fixed-clock"; + clock-output-names = "main_xtal"; #clock-cells = <0>; }; slow_xtal: clock-slowxtal { compatible = "fixed-clock"; + clock-output-names = "slow_xtal"; #clock-cells = <0>; }; }; + ns_sram: sram@100000 { + compatible = "mmio-sram"; + reg = <0x100000 0x20000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + }; + soc { compatible = "simple-bus"; ranges; #address-cells = <1>; #size-cells = <1>; + securam: sram@e0000800 { + compatible = "microchip,sama7d65-securam", "atmel,sama5d2-securam", "mmio-sram"; + reg = <0xe0000800 0x4000>; + ranges = <0 0xe0000800 0x4000>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>; + #address-cells = <1>; + #size-cells = <1>; + no-memory-wc; + }; + + secumod: security-module@e0004000 { + compatible = "microchip,sama7d65-secumod", "atmel,sama5d2-secumod", "syscon"; + reg = <0xe0004000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + }; + + sfrbu: sfr@e0008000 { + compatible ="microchip,sama7d65-sfrbu", "atmel,sama5d2-sfrbu", "syscon"; + reg = <0xe0008000 0x20>; + }; + pioa: pinctrl@e0014000 { compatible = "microchip,sama7d65-pinctrl", "microchip,sama7g5-pinctrl"; reg = <0xe0014000 0x800>; @@ -76,6 +119,38 @@ clock-names = "td_slck", "md_slck", "main_xtal"; }; + ps_wdt: watchdog@e001d000 { + compatible = "microchip,sama7d65-wdt", "microchip,sama7g5-wdt"; + reg = <0xe001d000 0x30>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk32k 0>; + }; + + reset_controller: reset-controller@e001d100 { + compatible = "microchip,sama7d65-rstc", "microchip,sama7g5-rstc"; + reg = <0xe001d100 0xc>, <0xe001d1e4 0x4>; + #reset-cells = <1>; + clocks = <&clk32k 0>; + }; + + shdwc: poweroff@e001d200 { + compatible = "microchip,sama7d65-shdwc", "microchip,sama7g5-shdwc", "syscon"; + reg = <0xe001d200 0x20>; + clocks = <&clk32k 0>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + atmel,wakeup-rtt-timer; + status = "disabled"; + }; + + rtt: rtc@e001d300 { + compatible = "microchip,sama7d65-rtt", "atmel,at91sam9260-rtt"; + reg = <0xe001d300 0x30>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk32k 0>; + }; + clk32k: clock-controller@e001d500 { compatible = "microchip,sama7d65-sckc", "microchip,sam9x60-sckc"; reg = <0xe001d500 0x4>; @@ -83,6 +158,114 @@ #clock-cells = <1>; }; + gpbr: syscon@e001d700 { + compatible = "microchip,sama7d65-gpbr", "syscon"; + reg = <0xe001d700 0x48>; + }; + + rtc: rtc@e001d800 { + compatible = "microchip,sama7d65-rtc", "microchip,sam9x60-rtc"; + reg = <0xe001d800 0x30>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk32k 1>; + }; + + chipid@e0020000 { + compatible = "microchip,sama7d65-chipid"; + reg = <0xe0020000 0x8>; + }; + + can0: can@e0828000 { + compatible = "bosch,m_can"; + reg = <0xe0828000 0x200>, <0x100000 0x7800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 58>; + assigned-clock-rates = <40000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; + bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + can1: can@e082c000 { + compatible = "bosch,m_can"; + reg = <0xe082c000 0x200>, <0x100000 0xbc00>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 59>; + assigned-clock-rates = <40000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; + bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + can2: can@e0830000 { + compatible = "bosch,m_can"; + reg = <0xe0830000 0x200>, <0x100000 0x10000>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 60>, <&pmc PMC_TYPE_GCK 60>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 60>; + assigned-clock-rates = <40000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; + bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + can3: can@e0834000 { + compatible = "bosch,m_can"; + reg = <0xe0834000 0x200>, <0x110000 0x4400>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 61>; + assigned-clock-rates = <40000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; + bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + can4: can@e0838000 { + compatible = "bosch,m_can"; + reg = <0xe0838000 0x200>, <0x110000 0x8800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 62>; + assigned-clock-rates = <40000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; + bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + dma2: dma-controller@e1200000 { + compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma"; + reg = <0xe1200000 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; + clock-names = "dma_clk"; + dma-requests = <0>; + status = "disabled"; + }; + sdmmc1: mmc@e1208000 { compatible = "microchip,sama7d65-sdhci", "microchip,sam9x60-sdhci"; reg = <0xe1208000 0x400>; @@ -95,6 +278,97 @@ status = "disabled"; }; + aes: crypto@e1600000 { + compatible = "microchip,sama7d65-aes", "atmel,at91sam9g46-aes"; + reg = <0xe1600000 0x100>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>; + clock-names = "aes_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + }; + + sha: crypto@e1604000 { + compatible = "microchip,sama7d65-sha", "atmel,at91sam9g46-sha"; + reg = <0xe1604000 0x100>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 78>; + clock-names = "sha_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>; + dma-names = "tx"; + }; + + tdes: crypto@e1608000 { + compatible = "microchip,sama7d65-tdes", "atmel,at91sam9g46-tdes"; + reg = <0xe1608000 0x100>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 91>; + clock-names = "tdes_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>, + <&dma0 AT91_XDMAC_DT_PERID(53)>; + dma-names = "tx", "rx"; + }; + + trng: rng@e160c000 { + compatible = "microchip,sama7d65-trng", "microchip,sam9x60-trng"; + reg = <0xe160c000 0x100>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 92>; + }; + + dma0: dma-controller@e1610000 { + compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma"; + reg = <0xe1610000 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; + clock-names = "dma_clk"; + status = "disabled"; + }; + + dma1: dma-controller@e1614000 { + compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma"; + reg = <0xe1614000 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; + clock-names = "dma_clk"; + status = "disabled"; + }; + + gmac0: ethernet@e1618000 { + compatible = "microchip,sama7d65-gem", "microchip,sama7g5-gem"; + reg = <0xe1618000 0x2000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_GCK 46>, <&pmc PMC_TYPE_GCK 49>; + clock-names = "pclk", "hclk", "tx_clk", "tsu_clk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 46>, <&pmc PMC_TYPE_GCK 49>; + assigned-clock-rates = <125000000>, <200000000>; + status = "disabled"; + }; + + gmac1: ethernet@e161c000 { + compatible = "microchip,sama7d65-gem", "microchip,sama7g5-gem"; + reg = <0xe161c000 0x2000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_PERIPHERAL 47>,<&pmc PMC_TYPE_GCK 47>, <&pmc PMC_TYPE_GCK 50>; + clock-names = "pclk", "hclk", "tx_clk", "tsu_clk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 47>, <&pmc PMC_TYPE_GCK 50>; + assigned-clock-rates = <125000000>, <200000000>; + status = "disabled"; + }; + pit64b0: timer@e1800000 { compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b"; reg = <0xe1800000 0x100>; @@ -111,6 +385,208 @@ clock-names = "pclk", "gclk"; }; + pwm: pwm@e1818000 { + compatible = "microchip,sama7d65-pwm", "atmel,sama5d2-pwm"; + reg = <0xe1818000 0x500>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 72>; + #pwm-cells = <3>; + status = "disabled"; + }; + + flx0: flexcom@e1820000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe1820000 0x200>; + ranges = <0x0 0xe1820000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + uart0: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; + clock-names = "usart"; + dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>, + <&dma1 AT91_XDMAC_DT_PERID(5)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + i2c0: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; + #address-cells = <1>; + #size-cells = <0>; + atmel,fifo-size = <32>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(6)>, + <&dma0 AT91_XDMAC_DT_PERID(5)>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + flx1: flexcom@e1824000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe1824000 0x200>; + ranges = <0x0 0xe1824000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + spi1: spi@400 { + compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>; + clock-names = "spi_clk"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>, + <&dma0 AT91_XDMAC_DT_PERID(7)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + i2c1: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>, + <&dma0 AT91_XDMAC_DT_PERID(7)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + + flx2: flexcom@e1828000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe1828000 0x200>; + ranges = <0x0 0xe1828000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 36>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + uart2: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 36>; + clock-names = "usart"; + dmas = <&dma1 AT91_XDMAC_DT_PERID(10)>, + <&dma1 AT91_XDMAC_DT_PERID(9)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + }; + + flx3: flexcom@e182c000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe182c000 0x200>; + ranges = <0x0 0xe182c000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + i2c3: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; + #address-cells = <1>; + #size-cells = <1>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>, + <&dma0 AT91_XDMAC_DT_PERID(11)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + }; + + flx4: flexcom@e2018000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe2018000 0x200>; + ranges = <0x0 0xe2018000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + uart4: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + clock-names = "usart"; + dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>, + <&dma1 AT91_XDMAC_DT_PERID(13)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi4: spi@400 { + compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + clock-names = "spi_clk"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>, + <&dma0 AT91_XDMAC_DT_PERID(13)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + + flx5: flexcom@e201c000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe201c000 0x200>; + ranges = <0x0 0xe201c000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + i2c5: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(16)>, + <&dma0 AT91_XDMAC_DT_PERID(15)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + flx6: flexcom@e2020000 { compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; reg = <0xe2020000 0x200>; @@ -132,6 +608,111 @@ }; }; + flx7: flexcom@e2024000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe2024000 0x200>; + ranges = <0x0 0xe2024000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + uart7: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; + clock-names = "usart"; + dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>, + <&dma1 AT91_XDMAC_DT_PERID(19)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + }; + + flx8: flexcom@e281c000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe281c000 0x200>; + ranges = <0x0 0xe281c000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + i2c8: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>, + <&dma0 AT91_XDMAC_DT_PERID(21)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + + flx9: flexcom@e2820000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe2820000 0x200>; + ranges = <0x0 0xe281c000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + i2c9: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>, + <&dma0 AT91_XDMAC_DT_PERID(23)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + + flx10: flexcom@e2824000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe2824000 0x200>; + ranges = <0x0 0xe2824000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + i2c10: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; + #address-cells = <1>; + #size-cells = <0>; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + + uddrc: uddrc@e3800000 { + compatible = "microchip,sama7d65-uddrc", "microchip,sama7g5-uddrc"; + reg = <0xe3800000 0x4000>; + }; + + ddr3phy: ddr3phy@e3804000 { + compatible = "microchip,sama7d65-ddr3phy", "microchip,sama7g5-ddr3phy"; + reg = <0xe3804000 0x1000>; + }; + gic: interrupt-controller@e8c11000 { compatible = "arm,cortex-a7-gic"; reg = <0xe8c11000 0x1000>, diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi index 17bcdcf0cf4a..381cbcfcb34a 100644 --- a/arch/arm/boot/dts/microchip/sama7g5.dtsi +++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi @@ -38,6 +38,16 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; /* min followed by max */ + d-cache-size = <0x8000>; // L1, 32 KB + i-cache-size = <0x8000>; // L1, 32 KB + next-level-cache = <&L2>; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x40000>; // L2, 256 KB + cache-unified; + }; }; }; @@ -117,19 +127,22 @@ }; clocks { - slow_xtal: slow_xtal { + slow_xtal: clock-slowxtal { compatible = "fixed-clock"; + clock-output-names = "slow_xtal"; #clock-cells = <0>; }; - main_xtal: main_xtal { + main_xtal: clock-mainxtal { compatible = "fixed-clock"; + clock-output-names = "main_xtal"; #clock-cells = <0>; }; - usb_clk: usb_clk { + usb_clk: clock-usbclk { compatible = "fixed-clock"; #clock-cells = <0>; + clock-output-names = "usb_clk"; clock-frequency = <48000000>; }; }; diff --git a/arch/arm/boot/dts/microchip/tny_a9260.dts b/arch/arm/boot/dts/microchip/tny_a9260.dts index ef6d586ce887..f0f2a787d669 100644 --- a/arch/arm/boot/dts/microchip/tny_a9260.dts +++ b/arch/arm/boot/dts/microchip/tny_a9260.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * tny_a9260.dts - Device Tree file for Caloa TNY A9260 board + * tny_a9260.dts - Device Tree file for Calao TNY A9260 board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ diff --git a/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi b/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi index 70e5635c78ed..4d4377f51bec 100644 --- a/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi +++ b/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * tny_a9260_common.dtsi - Device Tree file for Caloa TNY A926x board + * tny_a9260_common.dtsi - Device Tree file for Calao TNY A926x board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ diff --git a/arch/arm/boot/dts/microchip/tny_a9263.dts b/arch/arm/boot/dts/microchip/tny_a9263.dts index 62b7d9f9a926..fd8244b56e05 100644 --- a/arch/arm/boot/dts/microchip/tny_a9263.dts +++ b/arch/arm/boot/dts/microchip/tny_a9263.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * usb_a9263.dts - Device Tree file for Caloa USB A9293 board + * usb_a9263.dts - Device Tree file for Calao USB A9293 board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ @@ -64,7 +64,7 @@ nand@3 { reg = <0x3 0x0 0x800000>; rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; nand-bus-width = <8>; nand-ecc-mode = "soft"; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/microchip/tny_a9g20.dts b/arch/arm/boot/dts/microchip/tny_a9g20.dts index 118d766a1265..cebd5696a2c1 100644 --- a/arch/arm/boot/dts/microchip/tny_a9g20.dts +++ b/arch/arm/boot/dts/microchip/tny_a9g20.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * tny_a9g20.dts - Device Tree file for Caloa TNY A9G20 board + * tny_a9g20.dts - Device Tree file for Calao TNY A9G20 board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ diff --git a/arch/arm/boot/dts/microchip/usb_a9260.dts b/arch/arm/boot/dts/microchip/usb_a9260.dts index 66f8da89007d..3b61e7145060 100644 --- a/arch/arm/boot/dts/microchip/usb_a9260.dts +++ b/arch/arm/boot/dts/microchip/usb_a9260.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * usb_a9260.dts - Device Tree file for Caloa USB A9260 board + * usb_a9260.dts - Device Tree file for Calao USB A9260 board * * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ @@ -12,14 +12,6 @@ model = "Calao USB A9260"; compatible = "calao,usb-a9260", "atmel,at91sam9260", "atmel,at91sam9"; - chosen { - bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; - }; - - memory@20000000 { - reg = <0x20000000 0x4000000>; - }; - ahb { apb { shdwc: poweroff@fffffd10 { diff --git a/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi index 8744b5f6f792..da32c5fdcc47 100644 --- a/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi @@ -1,11 +1,16 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * usb_a926x.dts - Device Tree file for Caloa USB A926x board + * usb_a926x.dts - Device Tree file for Calao USB A926x board * * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ / { + chosen { + bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs"; + stdout-path = "serial0:115200n8"; + }; + clocks { slow_xtal { clock-frequency = <32768>; @@ -16,6 +21,10 @@ }; }; + memory@20000000 { + reg = <0x20000000 0x4000000>; + }; + ahb { apb { dbgu: serial@fffff200 { @@ -111,7 +120,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; @@ -122,17 +131,14 @@ user_led { label = "user_led"; - gpios = <&pioB 21 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; + gpios = <&pioB 21 GPIO_ACTIVE_HIGH>; }; }; gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - user_pb { + button-user-pb { label = "user_pb"; gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; diff --git a/arch/arm/boot/dts/microchip/usb_a9263.dts b/arch/arm/boot/dts/microchip/usb_a9263.dts index 45745915b2e1..8e1a3fb61087 100644 --- a/arch/arm/boot/dts/microchip/usb_a9263.dts +++ b/arch/arm/boot/dts/microchip/usb_a9263.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * usb_a9263.dts - Device Tree file for Caloa USB A9293 board + * usb_a9263.dts - Device Tree file for Calao USB A9293 board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ @@ -9,7 +9,7 @@ / { model = "Calao USB A9263"; - compatible = "atmel,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9"; + compatible = "calao,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9"; chosen { bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; @@ -58,7 +58,7 @@ }; spi0: spi@fffa4000 { - cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioA 5 GPIO_ACTIVE_LOW>; status = "okay"; flash@0 { compatible = "atmel,at45", "atmel,dataflash"; @@ -84,7 +84,7 @@ nand@3 { reg = <0x3 0x0 0x800000>; rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; nand-bus-width = <8>; nand-ecc-mode = "soft"; nand-on-flash-bbt; @@ -139,7 +139,7 @@ }; }; - usb0: ohci@a00000 { + usb0: usb@a00000 { num-ports = <2>; status = "okay"; }; @@ -151,16 +151,13 @@ user_led { label = "user_led"; gpios = <&pioB 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; }; }; gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - user_pb { + button-user-pb { label = "user_pb"; gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; diff --git a/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi index 08d58081201a..5b1d80c0ab26 100644 --- a/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi +++ b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi @@ -65,28 +65,26 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - user_pb1 { + button-user-pb1 { label = "user_pb1"; gpios = <&pioB 25 GPIO_ACTIVE_LOW>; linux,code = <0x100>; }; - user_pb2 { + button-user-pb2 { label = "user_pb2"; gpios = <&pioB 13 GPIO_ACTIVE_LOW>; linux,code = <0x101>; }; - user_pb3 { + button-user-pb3 { label = "user_pb3"; gpios = <&pioA 26 GPIO_ACTIVE_LOW>; linux,code = <0x102>; }; - user_pb4 { + button-user-pb4 { label = "user_pb4"; gpios = <&pioC 9 GPIO_ACTIVE_LOW>; linux,code = <0x103>; diff --git a/arch/arm/boot/dts/microchip/usb_a9g20.dts b/arch/arm/boot/dts/microchip/usb_a9g20.dts index 2f667b083e81..555291cd30b3 100644 --- a/arch/arm/boot/dts/microchip/usb_a9g20.dts +++ b/arch/arm/boot/dts/microchip/usb_a9g20.dts @@ -1,13 +1,28 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board + * usb_a9g20.dts - Device Tree file for Calao USB A9G20 board * * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ /dts-v1/; -#include "usb_a9g20_common.dtsi" +#include "at91sam9g20.dtsi" +#include "usb_a9260_common.dtsi" / { model = "Calao USB A9G20"; compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9"; }; + +&spi0 { + cs-gpios = <&pioC 11 GPIO_ACTIVE_LOW>; + status = "okay"; + /* TODO: Some revisions might have a dataflash here instead of an EEPROM */ + eeprom@0 { + compatible = "st,m95640", "atmel,at25"; + reg = <0>; + spi-max-frequency = <2000000>; + size = <8192>; + pagesize = <32>; + address-width = <16>; + }; +}; diff --git a/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi b/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi deleted file mode 100644 index 7d10b36db1ee..000000000000 --- a/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi +++ /dev/null @@ -1,27 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board - * - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - */ - -#include "at91sam9g20.dtsi" -#include "usb_a9260_common.dtsi" - -/ { - chosen { - bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs"; - stdout-path = "serial0:115200n8"; - }; - - memory@20000000 { - reg = <0x20000000 0x4000000>; - }; - - i2c-gpio-0 { - rtc@56 { - compatible = "microcrystal,rv3029"; - reg = <0x56>; - }; - }; -}; diff --git a/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts b/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts index f65712015d40..2eda00477bc5 100644 --- a/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts +++ b/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts @@ -1,11 +1,12 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * usb_a9g20_lpw.dts - Device Tree file for Caloa USB A9G20 Low Power board + * usb_a9g20_lpw.dts - Device Tree file for Calao USB A9G20 Low Power board * * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ /dts-v1/; -#include "usb_a9g20_common.dtsi" +#include "at91sam9g20.dtsi" +#include "usb_a9260_common.dtsi" / { model = "Calao USB A9G20 Low Power"; @@ -16,7 +17,7 @@ spi1: spi@fffcc000 { cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>; status = "okay"; - mmc-slot@0 { + mmc@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3200 3400>; @@ -27,4 +28,11 @@ }; }; }; + + i2c-gpio-0 { + rtc@56 { + compatible = "microcrystal,rv3029"; + reg = <0x56>; + }; + }; }; |