diff options
Diffstat (limited to 'Documentation')
5 files changed, 57 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml index b9afd07a9d24..b16273e69dfe 100644 --- a/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml @@ -46,6 +46,12 @@ properties: minimum: 12 maximum: 232 +patternProperties: + "-hog(-[0-9]+)?$": + type: object + required: + - gpio-hog + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml b/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml index 33d4e4716516..7ed5f9c4dde9 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml @@ -72,6 +72,9 @@ properties: "#gpio-cells": const: 2 + gpio-ranges: + maxItems: 1 + marvell,pwm-offset: $ref: /schemas/types.yaml#/definitions/uint32 description: Offset in the register map for the pwm registers (in bytes) @@ -96,6 +99,13 @@ properties: - const: axi minItems: 1 +patternProperties: + "^(.+-hog(-[0-9]+)?)$": + type: object + + required: + - gpio-hog + required: - compatible - gpio-controller diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml index cabda2eab4a2..4fb32e9aec0a 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml @@ -28,6 +28,7 @@ properties: - items: - enum: - fsl,imx93-gpio + - fsl,imx94-gpio - fsl,imx95-gpio - const: fsl,imx8ulp-gpio diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml index cf3b1b270aa8..b68159600e2b 100644 --- a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml @@ -20,7 +20,10 @@ properties: - loongson,ls2k2000-gpio1 - loongson,ls2k2000-gpio2 - loongson,ls3a5000-gpio + - loongson,ls3a6000-gpio # Loongson-3A6000 node GPIO - loongson,ls7a-gpio + - loongson,ls7a2000-gpio1 # LS7A2000 chipset GPIO + - loongson,ls7a2000-gpio2 # LS7A2000 ACPI GPIO - items: - const: loongson,ls2k1000-gpio - const: loongson,ls2k-gpio diff --git a/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml b/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml index 3718103e966a..8bca574bb66d 100644 --- a/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml +++ b/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml @@ -73,6 +73,43 @@ properties: wakeup-source: true + reset-gpios: + maxItems: 1 + description: + GPIO controlling the (reset active LOW) RESET# pin. + + The active polarity of the GPIO must translate to the low state of the + RESET# pin on the IC, i.e. if a GPIO is directly routed to the RESET# pin + without any inverter, GPIO_ACTIVE_LOW is expected. + + Performing a reset makes all lines initialized to their input (pulled-up) + state. + +allOf: + - if: + properties: + compatible: + not: + contains: + enum: + - nxp,pca9670 + - nxp,pca9671 + - nxp,pca9672 + - nxp,pca9673 + then: + properties: + reset-gpios: false + + # lines-initial-states XOR reset-gpios + # Performing a reset reinitializes all lines to a known state which + # may not match passed lines-initial-states + - if: + required: + - lines-initial-states + then: + properties: + reset-gpios: false + patternProperties: "^(.+-hog(-[0-9]+)?)$": type: object |